Product Catalog - Complete w-New product-1

Loc-N-Load™ Open-Sight™ … technique altering spring-action clamps for CMM and fast-swap, interlocking fixture plates for VISION for inspection. Featuring: Cross-Bow™ Silver-Bullet™ D-Block™ Simple-Stop™ Loc-N-Load™ Sliding-Stop™ Open-Sight™ Spring-Loc™ Riser-Grip™ Trigger-Finger™ Made in the USA Patents Pending 508-869-0373 www.fixture-up.com Products of Phillips Precision, Inc. Products Division, Boylston, MA 01505

Loc-N-Load™ CMM Fixture Plates The two main components of the Loc-N-Load™ Fixture Plate System adapt easily to your equipment. Install the docking rail with bolts or com- pletely out of the way using double-sided tape. Interlocking fixture plates quickly secure and release with the use of magnets creating highly re- peatable setups. Ready-made interlocking plates make low-cost fixtures. Avoid probe damage by changing setups quickly. Easily access your granite. Use as dedicated tooling—add to job box. Hole pattern integrates seamlessly when assembled. Get started with a docking rail, a plate and some work holding and add as work requires. Creating a LEAN QC department need not be expensive! “We were looking for a quick change fixture system for our CMM’s and be- lieve that your solution is just that! We are always focused on lean activities and as we expand our use of CMM’s on our shop floor this solution will be instrumental in our having a “self serve” inspection process.” Harvey Smith, VP Operations, Ken- nebec Technologies Clear Anodized Aluminum, .5” thick, 1/4-20 holes 1x1” spacing or METRIC 13mm thick, M6 holes. System Accessories: A unique plate is available for the qualifying Part # (US) Part # (Metric) Description (Inch) Metric (MM) A/B Price ball/bar that can be removed Rails, End Caps, Plates quickly when not in use. Add an angle plate as a stop when you LNL-DOCK-12 use (US) Docking Rail 2 x 12'' 50.8 x 304.8 $ 280.00 need to inspect quickly on the LNL-DOCK-18 use (US) Docking Rail 2 x 18'' 50.8 x 457.2 $ 295.00 granite. Affix an Adapter plate to LNL-DOCK-30 use (US) Docking Rail 2 x 30'' 50.8 x 762.0 $ 360.00 re-use existing fixtures LNL-ENDCAP-18 use (US) Endcap 2 x 18'' 50.8 x 457.2 $ 210.00 LNL-ENDCAP-30 use (US) Endcap 2 x 30'' 50.8 x 762.0 $ 285.00 LNL-PLT-0606 LNL-PLT-0606-M LNL Fixture Plate 6 x 6'' 152.4 x 152.4 6” $ 169.00 LNL-PLT-0612 LNL-PLT-0612-M LNL Fixture Plate 6 x 12'' 152.4 x 304.8 12” $ 240.00 Adapter LNL-PLT-0618 LNL-PLT-0618-M LNL Fixture Plate 6 x 18'' 152.4 x 457.2 18” $ 300.00 Unique LNL-PLT-1212 LNL-PLT-1212-M LNL Fixture Plate 12 x 12'' 304.8 x 304.8 12” $ 380.00 Indicator Ball Bar Plate LNL-PLT-1218 LNL-PLT-1218-M LNL Fixture Plate 12 x 18'' 304.8 x 457.2 18” $ 530.00 Accessories for LNL Plates LNL-ADPT-06 use (US) Adapter Plate 6 x 1” 152.4 x 25.4 $119.00 LNL-ANGL-0603 use (US) Angle Plate/ Stop 6 x 6” 152.4 x 152.4 $ 159.00 Angle Stop/Plate LNL-QUAL-PLT use (US) Indicator Ball Plate 6 x 4” 152.4 x 101.6 $ 149.00 PATENTS PENDING [email protected] Phone: 508-869-0373 2

Loc-N-Load™ CMM Bundled Systems INSPECTION ARSENAL™ is a ready-made fixture system for CMM Inspec- tions. Create affordable, repeatable, and durable fixtures that reduce setup time for faster parts inspecting with Loc-N-Load™ plates and non-marring clamps. Aluminum .05” plates interlock magnetically to remain firmly secured to one another yet release quickly and easily for the next job. The system easily installs on all CMMs. An order placed today can be improving productivity and profits tomorrow. 12” Rail Bundle System + Starter Kit $1059 + Complete Kit $1159 Select the Docking Rail and Plate Bundle combination that suits your application. Then choose one workholding kit — Starter or Complete. Add additional plates and clamps as needed. STARTER Kit (30+ pcs) 18” Rail Bundle System + Starter Kit $1139 + Complete Kit $1239 COMPLETE Kit (62+ pcs) 30” Rail Bundle System + Starter Kit $1569 + Complete Kit $1669 See Pg. 4 for Kit contents Clear Anodized Aluminum .5” plates with 1 x 1” pattern. For Metric orders, add an M to the part # shown below. Rail Rail 6 x 6” 6 x 12” 12 x 12” Starter Complete Part # / Metric (M) Description Price Size Qty Plate Plate Plate TR-KIT-03 TR-KIT-02 SYS05: DK12TR03 /(M) 12\" Dock + Starter $1059 12 x 2” 1 2 1 SYS05: DK12TR02 /(M) 12\" Dock + Complete $1159 12 x 2” 1 2 1 SYS10: DK18TR03 /(M) 18\" Dock + Starter $1139 18 x 2” 1 1 1 1 SYS10: DK18TR02 /(M) 18\" Dock + Complete $1239 18 x 2” 1 1 1 1 SYS20: DK30TR03 /(M) 18\" Dock + Starter $1569 30 x 2” 1 1 1 1 1 SYS20: DK30TR02 /(M) 30\" Dock + Complete $1669 30 x 2” 1 1 1 1 1 PATENTS PENDING [email protected] Phone: 508-869-0373 3

CMM Work Holding Kits STARTER KIT—$499 Fast trigger-action; Non-marring, TR-KIT-03 (1/4-20 thread) low-profile. TR-KIT-03M (M6 thread) No tools, or messy tape and glue. 4 ea– Silver-Bullets™ sets, Stackable shafts; 2 ea – Cross-Bow™, D-Block™, Trigger-Block™, Stackable, versatile components. Trigger-Finger™, Hole Adjusters, Simple-Stop™ #01, #07; plus Hex key, thumb and button-head Fixture-up affordably—Add sets screws, and 5S foam drawer inserts. or plates as needed. Affordably create multi-part fixtures. COMPLETE KIT—$599 TR-KIT-02 (1/4-20 thread) TR-KIT-02M (M6 thread) 4 ea– Cross-Bow™, D-Block™, Trigger-Block™, Silver Bullets™ 3-pc sets, stackable steel shafts, 2 ea – Trigger-Finger™, Hole Adjusters; 1 – 7-pc set Simple-Stops™; plus Hex key, thumb and but- ton-head screws, and 5S foam drawer inserts. See Page 6 for a complete listing of Inspection Arsenal™ work holding. OPEN-SIGHT™ Work Holding Kits VISION KIT (15+ pcs) —$369 VIS-KIT-01 (1/4-20 thread) VIS-KIT-01M (M6 thread) Work holding kit for Vision / Optical Plate Sys- tems includes: 2 Trigger-Finger™ plastic hold- downs, 2 Trigger-Point™ thin steel tip hold- downs, 2 hole adjusters, 2 Slide-Loc™ spring clamps, 2 Sliding Stop™ scalloped stops and an adjustable platform to extend parts over the viewing area. Plus Hex key, thumb and button-head screws, and 5S foam drawer inserts. VISION Work Holding Kit contents Part # Description HA-1420 Hole Adjuster Set of 2 ADJ-PLT-10 Adjustable Platform 1 each SLI-STOP Sliding-Stop™ (w- 1/4-20 screws) Set of 2 SPR-LOC Spring-Loc™ (w- 1/4-20 screws) Set of 2 TRFN-10 Trigger-Finger™ Set of 2 TRPT-10 Trigger-Point™ Set of 2 TRFN-SHAFT Steel shaft/stand-off Set of 4 PATENTS PENDING [email protected] Phone: 508-869-0373 4

OPEN-SIGHT™ Vision Fixture Plates The same LEAN fixture concept is available for Vision systems. With the signature shape for rails and plates, users can interchange systems, especially for mult- sensor machines. Plates and docking rails are .5” thick. Durable, scratch-resistant polycarbonate plates. LEANest, most affordable solution for VISION. Add more than 1 dock side-by-side or opposite on the stage. Interchangeable with our LOC-N-LOAD™ aluminum plates. More open viewing area. Or order blank plates to customize. Dedicate a plate to gauging for fast re-calibration. OPEN-SIGHT™ for Vision — Clear Polycarb .5” (13mm) plates, 1/4-20” (M6) holes. Leveling feet available. Part # Description (Inch) Metric Price OS-CORNER-66 Corner Block 6 X 6” 152.4 x 152.4 $190 OS-DOCK-06 Docking Rail 6 x 3” 152.4 x 76.2 $185 OS-DOCK-12 Docking Rail 12 x 3” 304.8 x 76.2 $295 OS-PLT-0606 Plate 6 x 6” 152.4 x 152.4 $225 OS-PLT-0606-B Plate-Blank 6 x 6” 152.4 x 152.4 $175 OS-PLT-0608 Plate 6 x 8” 152.4 x 203.2 $250 OS-PLT-0808 Plate 8 x 8” 203.2 x 203.2 $290 OS-PLT-1208 Plate 12 x 8” 304.8 x 203.2 $485 OS-PLT-1208-B Plate-Blank 12 x 8” 304.8 x 203.2 $350 OPEN-SIGHT™ Vision Bundled Systems Open-Sight™ docking rails are designed to fit the stage of any optical machine. Choose from a 6” or 12” combination which in- cludes a docking rail, a polycarbonate plate, plus 15+ pcs. clamp kit. Add docking rails end-to-end or on opposite sides of the stage to create more “locations” for inspection. Order blank plates and add only holes you need for even greater savings. Dedicate a plate for gauging. Docking rails: .5” (13mm) black anodized aluminum. Plates: Clear Polycarbon- ate .5” (13mm) with 1/4-20” (M6) holes. Plus 18+ pcs VISION KIT Part # / Metric (M) BUNDLE Description - Inch Rail Size (M) Price SYS01: DK06VIS01 1 ea: 6” Dock, 6 x 6” plate + VIS-KIT-01 6” (152.4) $ 739 SYS02: DK12VIS01 1 ea: 12” Dock, 12 x 8” plate + VIS-KIT-01 12” (304.8) $1089 PATENTS PENDING [email protected] Phone: 508-869-0373 5

CMM and VISION Work Holding Sets Spring Clamps Risers & Stand-offs Riser-Grip™ 1/4” Cross-Bow™ D-Block™ Riser-Grip™ 1/2” Trigger-Block™ Spring-Loc™ V-Block Trigger-Finger™ Trigger-Point™ Silver-Bullets™ set = 1”, 2”, 3” Steel Shaft Stops & Rails SS-0 2 SS-0 7 SS-0 6 Hole Adjuster Adjustable Platform SS-05 SS-0 1 SS-0 4 SS-0 3 Simple-Stops ™ - set of 7 Sliding Loc™ WORK HOLDING SETS (add -M for METRIC) Dimensions are Inch; screws are Inch 1/4-20 or Metric M6 Part # (US) Description Qty Price Part # (US) Description Qty Price Spring Clamps Stops & Rails CRBW-30 Cross-Bow™ Spring Clamp 8 $ 59.00 SIST-RS-100 Simple-Stops™ Aluminum, Set of 7 7 $199.00 D-BLK-30 D-Block™ Spring Stop 8 $ 56.00 SS-01, SS-02, SS-03, SS-04, TRBL-30 Trigger-Block™ Spring Clamp 8 $ 56.00 SS-05, SS-06, SS-07 SPR-LOC Spring-Loc™ Low-profile Clamp 2 $ 79.80 TRFN-30 Trigger-Finger™ & steel shaft 8 $199.00 HA-1420 / M6 Hole Adjuster for Trigger-Finger™ 2 $ 49.90 TRPT-20 Trigger-Point™ & steel shaft 4 $199.00 ADJ-PLT-10 Adjustable Platform for TRFN, TRPT 1 $ 49.90 Risers & Stand-offs SLI-STOP Sliding-Stop™ Low-profile Stop 2 $ 39.80 RG-250 Riser-Grip™ 1/4” opening riser 1 $ 89.95 Not shown: RG-500 Riser-Grip™ 1/2” opening riser 1 $159.95 SIBU-SO- Silver-Bullet™ Stand-off (Set = 1, 2 ,3”) VB-001 V-Block 90° included angle 2 $ 99.90 100_SS in Stainless Steel 4 $539.00 SIBU-SO-100 Silver-Bullet™ Stand-off (Set = 1, 2 ,3”) 4 $199.00 TRFN-SHAFT Steel shaft / stand-off 1 $ 16.95 $ PATENTS PENDING [email protected] Phone: 508-869-0373 6

LOC-N-LOAD™ & OPEN-SIGHT™ Setups With Inspection Arsenal™ STANDARD components you’ll spend LESS… Less money—Most affordable plates & clamps! Less part swap time—Trigger-action is fast! Less time waiting—Order can ship same day. Less disruption—Lock in a new setup quickly. Less designing—Create simpler setups. Less setup time—dedicate as tooling for jobs. Fixture-Up for large part lots and multiple setups ! “We have a bottleneck in our QC de- partment because our new Palletech machines produce parts faster than we can inspect – even with our automated CMMs. The action of these new system helps us inspect parts faster- boosting productivity of both machines. We’re able to verify the quality of more parts Designer in S. Korea uses Cross-Bow™ clamps as early in production.” Scott Ferrecchia, President, Lincoln an affordable inspection solution. Tool & Machine, Hudson, MA Keep Loc-N-Load ™ plates set up on your CMM. Swap out quickly for new parts or to Trigger-Block™ fixture for access granite. 100% inspection of large lots at a medical company. Fixture part families and document for LEANer, faster inspection. One large part spans Riser-Grip™ multiple plates using clamp provides full access, use (2) 1” Silver- (1) Silver- Bullets™ as stops. Bullet™ as a stop. Large, complex motor frame sits atop Silver- Bullet™ standoffs. Titanium shaft on (4) 3” Silver-Bullet™ standoffs In-process Stack Simple- held down by Trigger- fixture with D- Stops™ on Finger™. Block™ and shafts and Simple-Stop™ combine with on 6x6 LNL Silver- plate™. Bullets™. Phone: 508-869-0373 ne: 508-869-0373 [email protected] [email protected] PATENTS PENDING TENTS PENDING PA c Pho 7

Inspection Arsenal™ can fundamentally change the flow of work through your quality department. Companies don’t need a formal Kaizen event to know that bottlenecks exist in QC. Now with Inspection Arsenal™ modular, quick- swap system you can make your CMM’s keep pace with your CNC’s! Your colleagues are saving thousands in in- spection costs by cutting the time in half. Some are even working towards a more “lights-out” approach to inspection using Loc-N-Load™ fixtures and a higher level of inspection programming. Inspection Arsenal™ is the only ready- made system that can be ordered online and shipped same day (by 2:00 EST). Order at www.fixture-up.com or inquire about starting an account with us today. Made in the USA Patents Pending 508-869-0373 www.fixture-up.com Products of Phillips Precision, Inc. Products Division, Boylston, MA 01505 8