Product Catalog - Complete w-New products

Loc-N-Load™ … technique altering spring-action clamps Open-Sight™ and fast-swap, interlocking fixture plates for CMM for VISION for inspection.Featuring:Cross-Bow™ Silver-Bullet™D-Block™ Simple-Stop™Loc-N-Load™ Sliding-Stop™Open-Sight™ Spring-Loc™Riser-Grip™ Trigger-Finger™Made in the USA Patents Pending 508-869-0373 www.fixture-up.comProducts of Phillips Precision, Inc. Products Division, Boylston, MA 01505

Loc-N-Load™ CMM Fixture Plates The two main components of the Loc-N-Load™ Fixture Plate System adapt easily to your equipment. Install the docking rail with bolts or com- pletely out of the way using double-sided tape. Interlocking fixture plates quickly secure and release with the use of magnets creating highly re- peatable setups. Ready-made interlocking plates make low-cost fixtures. Avoid probe damage by changing setups quickly. Easily access your granite. Use as dedicated tooling—add to job box. Hole pattern integrates seamlessly when assembled. Get started with a docking rail, a plate and some work holding and add as work requires. Creating a LEAN QC department need not be expensive!“We were looking for a quick changefixture system for our CMM’s and be-lieve that your solution is just that! Weare always focused on lean activitiesand as we expand our use of CMM’son our shop floor this solution will beinstrumental in our having a “selfserve” inspection process.”Harvey Smith, VP Operations, Ken-nebec TechnologiesClear Anodized Aluminum, .5” thick, 1/4-20 holes 1x1” spacing or METRIC 13mm thick, M6 holes. System Accessories: A unique plate is available for the qualifyingPart # (US) Part # (Metric) Description (Inch) Metric (MM) A/B Price ball/bar that can be removed quickly when not in use. Add anRails, End Caps, Plates angle plate as a stop when you need to inspect quickly on theLNL-DOCK-12 use (US) Docking Rail 2 x 12'' 50.8 x 304.8 $ 280.00 granite. Affix an Adapter plate to re-use existing fixturesLNL-DOCK-18 use (US) Docking Rail 2 x 18'' 50.8 x 457.2 $ 295.00LNL-DOCK-30 use (US) Docking Rail 2 x 30'' 50.8 x 762.0 $ 360.00LNL-ENDCAP-18 use (US) Endcap 2 x 18'' 50.8 x 457.2 $ 210.00LNL-ENDCAP-30 use (US) Endcap 2 x 30'' 50.8 x 762.0 $ 285.00LNL-PLT-0606 LNL-PLT-0606-M LNL Fixture Plate 6 x 6'' 152.4 x 152.4 6” $ 169.00LNL-PLT-0612 LNL-PLT-0612-M LNL Fixture Plate 6 x 12'' 152.4 x 304.8 12” $ 240.00 AdapterLNL-PLT-0618 LNL-PLT-0618-M LNL Fixture Plate 6 x 18'' 152.4 x 457.2 18” $ 300.00 Unique Indicator BallLNL-PLT-1212 LNL-PLT-1212-M LNL Fixture Plate 12 x 12'' 304.8 x 304.8 12” $ 380.00 Bar PlateLNL-PLT-1218 LNL-PLT-1218-M LNL Fixture Plate 12 x 18'' 304.8 x 457.2 18” $ 530.00Accessories for LNL PlatesLNL-ADPT-06 use (US) Adapter Plate 6 x 1” 152.4 x 25.4 $119.00LNL-ANGL-0603 use (US) Angle Plate/ Stop 6 x 6” 152.4 x 152.4 $ 159.00 Angle Stop/PlateLNL-QUAL-PLT use (US) Indicator Ball Plate 6 x 4” 152.4 x 101.6 $ 149.00 PATENTS PENDING [email protected] Phone: 508-869-0373 2

Loc-N-Load™ CMM Bundled Systems INSPECTION ARSENAL™ is a ready-made fixture system for CMM Inspec- tions. Create affordable, repeatable, and durable fixtures that reduce setup time for faster parts inspecting with Loc-N-Load™ plates and non-marring clamps. Aluminum .05” plates interlock magnetically to remain firmly secured to one another yet release quickly and easily for the next job. The system easily installs on all CMMs. An order placed today can be improving productivity and profits tomorrow. 12” Rail Bundle System + Starter Kit $1059 + Complete Kit $1159 Select the Docking Rail and Plate Bundle combination that suits your application. Then choose one workholding kit — Starter or 18” Rail Bundle System Complete. Add additional plates and clamps as needed. + Starter Kit $1139 + Complete Kit $1239 STARTER Kit (30+ pcs) COMPLETE Kit (62+ pcs) 30” Rail Bundle System + Starter Kit $1569 + Complete Kit $1669 See Pg. 4 for Kit contentsClear Anodized Aluminum .5” plates with 1 x 1” pattern. For Metric orders, add an M to the part # shown below.Part # / Metric (M) Description Price Rail Rail 6 x 6” 6 x 12” 12 x 12” Starter Complete Size Qty Plate Plate Plate TR-KIT-03 TR-KIT-02SYS05: DK12TR03 /(M) 12\" Dock + Starter $1059 12 x 2” 1 2 1SYS05: DK12TR02 /(M) 12\" Dock + Complete $1159 12 x 2” 1 2 1SYS10: DK18TR03 /(M) 18\" Dock + Starter $1139 18 x 2” 1 1 1 1SYS10: DK18TR02 /(M) 18\" Dock + Complete $1239 18 x 2” 1 1 1 1SYS20: DK30TR03 /(M) 18\" Dock + Starter $1569 30 x 2” 1 1 1 1 1SYS20: DK30TR02 /(M) 30\" Dock + Complete $1669 30 x 2” 1 1 1 1 1PATENTS PENDING [email protected] Phone: 508-869-0373 3

CMM Work Holding Kits STARTER KIT—$499 Fast trigger-action; Non-marring, TR-KIT-03 (1/4-20 thread) low-profile. TR-KIT-03M (M6 thread) No tools, or messy tape and glue. 4 ea– Silver-Bullets™ sets, Stackable shafts; 2 ea – Cross-Bow™, D-Block™, Trigger-Block™, Stackable, versatile components. Trigger-Finger™, Hole Adjusters, Simple-Stop™ #01, #07; plus Hex key, thumb and button-head Fixture-up affordably—Add sets screws, and 5S foam drawer inserts. or plates as needed. Affordably create multi-part fixtures. COMPLETE KIT—$599 TR-KIT-02 (1/4-20 thread) TR-KIT-02M (M6 thread) 4 ea– Cross-Bow™, D-Block™, Trigger-Block™, Silver Bullets™ 3-pc sets, stackable steel shafts, 2 ea – Trigger-Finger™, Hole Adjusters; 1 – 7-pc set Simple-Stops™; plus Hex key, thumb and but- ton-head screws, and 5S foam drawer inserts. See Page 6 for a complete listing of Inspection Arsenal™ work holding.OPEN-SIGHT™ Work Holding Kits VISION KIT (15+ pcs) —$369 VIS-KIT-01 (1/4-20 thread) VIS-KIT-01M (M6 thread) Work holding kit for Vision / Optical Plate Sys- tems includes: 2 Trigger-Finger™ plastic hold- downs, 2 Trigger-Point™ thin steel tip hold- downs, 2 hole adjusters, 2 Slide-Loc™ spring clamps, 2 Sliding Stop™ scalloped stops and an adjustable platform to extend parts over the viewing area. Plus Hex key, thumb and button-head screws, and 5S foam drawer inserts. VISION Work Holding Kit contentsPart # DescriptionHA-1420 Hole Adjuster Set of 2ADJ-PLT-10 Adjustable Platform 1 eachSLI-STOP Sliding-Stop™ (w- 1/4-20 screws) Set of 2SPR-LOC Spring-Loc™ (w- 1/4-20 screws) Set of 2TRFN-10 Trigger-Finger™ Set of 2TRPT-10 Trigger-Point™ Set of 2TRFN-SHAFT Steel shaft/stand-off Set of 4 PATENTS PENDING [email protected] Phone: 508-869-0373 4

OPEN-SIGHT™ Vision Fixture Plates The same LEAN fixture concept is available for Vision systems. With the signature shape for rails and plates, users can interchange systems, especially for mult- sensor machines. Plates and docking rails are .5” thick. Durable, scratch-resistant polycarbonate plates. LEANest, most affordable solution for VISION. Add more than 1 dock side-by-side or opposite on the stage. Interchangeable with our LOC-N-LOAD™ aluminum plates. More open viewing area. Or order blank plates to customize. Dedicate a plate to gauging for fast re-calibration.OPEN-SIGHT™ for Vision — Clear Polycarb .5” (13mm)plates, 1/4-20” (M6) holes. Leveling feet available.Part # Description (Inch) Metric Price $190OS-CORNER-66 Corner Block 6 X 6” 152.4 x 152.4 $185 $295OS-DOCK-06 Docking Rail 6 x 3” 152.4 x 76.2 $225 $175OS-DOCK-12 Docking Rail 12 x 3” 304.8 x 76.2 $250OS-PLT-0606 Plate 6 x 6” 152.4 x 152.4OS-PLT-0606-B Plate-Blank 6 x 6” 152.4 x 152.4OS-PLT-0608 Plate 6 x 8” 152.4 x 203.2OS-PLT-0808 Plate 8 x 8” 203.2 x 203.2 $290OS-PLT-1208 Plate 12 x 8” 304.8 x 203.2 $485OS-PLT-1208-B Plate-Blank 12 x 8” 304.8 x 203.2 $350OPEN-SIGHT™ Vision Bundled Systems Open-Sight™ docking rails are designed to fit the stage of any optical machine. Choose from a 6” or 12” combination which in- cludes a docking rail, a polycarbonate plate, plus 15+ pcs. clamp kit. Add docking rails end-to-end or on opposite sides of the stage to create more “locations” for inspection. Order blank plates and add only holes you need for even greater savings. Dedicate a plate for gauging.Docking rails: .5” (13mm) black anodized aluminum. Plates: Clear Polycarbon-ate .5” (13mm) with 1/4-20” (M6) holes. Plus 18+ pcs VISION KITPart # / Metric (M) BUNDLE Description - Inch Rail Size (M) Price 6” (152.4) $ 739SYS01: DK06VIS01 1 ea: 6” Dock, 6 x 6” plate + VIS-KIT-01 12” (304.8) $1089SYS02: DK12VIS01 1 ea: 12” Dock, 12 x 8” plate + VIS-KIT-01 PATENTS PENDING [email protected] Phone: 508-869-0373 5

CMM and VISION Work Holding SetsSpring Clamps Risers & Stand-offs Cross-Bow™ D-Block™ Riser-Grip™ 1/4” V-Block Riser-Grip™ 1/2” Trigger-Block™ Spring-Loc™ Trigger-Finger™ Trigger-Point™ Silver-Bullets™ set = 1”, 2”, 3” Steel ShaftStops & Rails SS-0 7 SS-0 2 SS-0 6 Hole Adjuster Adjustable Platform SS-0 1 SS-05 SS-0 4 SS-0 3 Simple-Stops ™ - set of 7 Sliding Loc™ WORK HOLDING SETS (add -M for METRIC) Dimensions are Inch; screws are Inch 1/4-20 or Metric M6Part # (US) Description Qty Price Part # (US) Description Qty Price SIST-RS-100 Stops & Rails 7 $199.00 Spring Clamps Simple-Stops™ Aluminum, Set of 7 SS-01, SS-02, SS-03, SS-04,CRBW-30 Cross-Bow™ Spring Clamp 8 $ 59.00 SS-05, SS-06, SS-07D-BLK-30 D-Block™ Spring Stop 8 $ 56.00TRBL-30 Trigger-Block™ Spring Clamp 8 $ 56.00SPR-LOC Spring-Loc™ Low-profile Clamp 2 $ 79.80TRFN-30 Trigger-Finger™ & steel shaft 8 $199.00 HA-1420 / M6 Hole Adjuster for Trigger-Finger™ 2 $ 49.90 ADJ-PLT-10 1 $ 49.90TRPT-20 Trigger-Point™ & steel shaft 4 $199.00 SLI-STOP Adjustable Platform for TRFN, TRPT 2 $ 39.80 Risers & Stand-offs SIBU-SO- Sliding-Stop™ Low-profile Stop 4 $539.00 100_SS Not shown:RG-250 Riser-Grip™ 1/4” opening riser 1 $ 89.95 Silver-Bullet™ Stand-off (Set = 1, 2 ,3”) in Stainless SteelRG-500 Riser-Grip™ 1/2” opening riser 1 $159.95VB-001 V-Block 90° included angle 2 $ 99.90SIBU-SO-100 Silver-Bullet™ Stand-off (Set = 1, 2 ,3”) 4 $199.00TRFN-SHAFT Steel shaft / stand-off 1 $ 16.95 $ PATENTS PENDING [email protected] Phone: 508-869-0373 6

LOC-N-LOAD™ & OPEN-SIGHT™ Setups With Inspection Arsenal™ STANDARD components you’ll spend LESS…Less money—Most affordable plates & clamps! Less part swap time—Trigger-action is fast!Less time waiting—Order can ship same day. Less disruption—Lock in a new setup quickly.Less designing—Create simpler setups. Less setup time—dedicate as tooling for jobs.Fixture-Up for large part lots and multiple setups ! “We have a bottleneck in our QC de- Designer in S. Korea uses Cross-Bow™ clamps as partment because our new Palletech an affordable inspection solution. machines produce parts faster than we can inspect – even with our automated CMMs. The action of these new system helps us inspect parts faster- boosting productivity of both machines. We’re able to verify the quality of more parts early in production.” Scott Ferrecchia, President, Lincoln Tool & Machine, Hudson, MAKeep Loc-N-Load ™ plates set up on your Trigger-Block™ fixture forCMM. Swap out quickly for new parts or to 100% inspection of large lots ataccess granite. a medical company.Fixture part families and document for LEANer, faster inspection.One large part spans Riser-Grip™multiple plates using clamp provides(2) 1” Silver- full access, useBullets™ as stops. (1) Silver- Bullet™ as a stop. Large, complex motor frame sits atop Silver- Bullet™ standoffs.Titanium shaft on (4) 3” In-process Stack Simple-Silver-Bullet™ standoffs fixture with D- Stops™ onheld down by Trigger- Block™ and shafts andFinger™. Simple-Stop™ combine with on 6x6 LNL Silver- plate™. Bullets™.PATENTS PENDING [email protected] Phone: 508-869-0373 7