Product Catalogue 2017

Index 101 G347 PASVE SC/SF/SH/SP/ST Sampling Valve 01.07.2015 Upgrade kit Order code Part no. Part name V10103004 3 Bearing T1010344 5 Special nut V T1010342 6 Valve ball V T1010343 8 Valve body LV V10103012 11 Gasket 80001101 13 O-ring Ø11,3 x 2,4 NBR V10103014 14 Rubber septum T1010331 21 Rubber seal M1010043 Upgrade kit, assemblyProtection kit Part no. Part name Order code 1 Pull-out sleeve T1010338 2 Spring T1010341 3 Locking sleeve T1010339 4 Retaining screw M4x4 DIN916 A4 53002440 Protection kit 2, assembly M1010042

Index 102Mounting couplings for Satron VG transmitter G150 10.2.2015Thread and clamp couplingsStandard coupling G1 Standard coupling G1 Hygienic coupling G1 with cleaningOrder codes: M546197 Order codes: M1050020 Order codes: M548101- AISI316L M5461978 - AISI316L M10500208 - AISI316L M5481018- Duplex M5461973 - Duplex M10500203 - Duplex M548102- Hastelloy C276 M5461976 - Hastelloy C276 M10500206 - Hastelloy C276 M548103- Titanium - Titanium - TitaniumCoupling G1 / G½A Coupling G1 / ½ -NPT Coupling G1 / G¾AOrder code: M546190 Order code: M551566 Order code: T1050218- AISI316L - AISI316L - AISI316LCoupling G1 / G1A Coupling G1 / G1¼A Coupling G1 / G1½AOrder codes: Order code: Order code: - AISI316L - AISI316L- AISI316L M1050002 M1050014 T1050214- Hastelloy C276 M10500023 Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 103Mounting couplings for Satron VG transmitter G150 10.2.2015Coupling G1 / G2A Coupling G1 / 2-NPT Coupling G1 / M44 x 1,25 (PMC)Order code:- AISI316L M1050036 Order code: M1050028 Order codes: - AISI316L - AISI316L M1050004 - Hastelloy C276 M10500043Coupling G1 / Hygienic Coupling G1 / Hygienic Coupling G1 / Hygieniccoupling ISO2852 standard: coupling SMS standard: coupling DIN11851/11887 standards:Order codes (AISI316L):- Tri-Clamp 25/38 M1050206 Order codes (AISI316L):- Tri-Clamp 40/51 M1050222- Tri-Clamp 63,5 M1050224 - SMS 38 M1050265 Order codes (AISI316L):- Tri-Clamp 70 M1050225- Tri-Clamp 76,1 M1050226 - SMS 51 M1050267 - DN40 M1050312- Tri-Clamp 88,9 M1050227- Tri-Clamp 101,6 M1050228 - DN50 M1050313- Tri-Clamp 114,3 M1050229- Tri-Clamp 139,7 M1050230 - DN65 M1050314Coupling G1 / PMC 1,5\" Extended coupling G1 Extended coupling G1 with cleaningOrder codes: Order codes:- AISI316L M1050010 Order code: - AISI316L M1050292 - AISI316L- Hastelloy C276 M10500103 M1050293 - Hastelloy C276 M10502923

Index 104Mounting couplings for Satron VG transmitter G150 10.2.2015Coupling G1 / G½A + drain Coupling G1 for pipes Coupling G1 for pipesvalve DN15 - DN25 and clean DN15 - DN40 liquidsOrder code: M860280 Order codes (AISI316L):- AISI316L Order codes (AISI316L): - DN15 M105001615 - DN15 M1050295 - DN20 M105001620 - DN20 M1050296 - DN25 M105001625 - DN25 M1050297 - DN32 M105001632 - DN40 M105001640Coupling G1 / G½A (male) Coupling G1 / G½ (female) Coupling G1 / Ø52,5 L=38with mounting bracket with mounting bracket (SMS nut fixing, size 38, thread 60 x 1/6) Order code:Order code: M546195 - AISI316L M550393 Order code:- AISI316L - AISI316LCoupling G1 / ½ - NPT Coupling G1 / ½ - NPT M1050575(male) with mounting bracket (female) with mounting bracketOrder code: M1050017 Order code:- AISI316L - AISI316L M550393N

Index 105Mounting couplings for Satron VG transmitter G150 10.2.2015 ØD 19,5 Ø45Coupling G1 / SMS-SI G1Coupling G1 / Sandvik-clamp Thread sleeve G1- with extension - Extension length 54,5 mm (eg. for coupling M1050002)Order codes (AISI316L): Order codes: Order codes:- SMS-SI38 M1050012 - AISI316L- SMS-SI51 M1050126 - Duplex M1050037 - AISI316L M1050220 - Hastelloy C276 M10500378 M10500373 - Hastelloy C276 M10502203Flange couplings COUPLING TYPE FLANGE TYPE G1 std. G1 std. HC G1 hyg. G1 hyg. HC G1 Exi G1 Exi HC DN25 PN40 ORDER CODE ORDER CODE ORDER CODE ORDER CODE ORDER CODE ORDER CODE DN40 PN40 DN50 PN40 M548832 M5488323 M548833 M5488333 M548834 M5488343 DN80 PN40 M551267 M5512673 M551268 M5512683 M552361 M5523613 DN100 PN40 M860282 M8602823 M548830 M5488303 M548831 M5488313 ANSI1\"150LBS M860281 M8602813 M548829 M5488283 ANSI1\"300LBS M552364 M5523643 M548828 M5488283 M5523641 ANSI2\"150LBS M552365 M5523653 M55236403 M5523651 M55236413 ANSI2\"300LBS M548861 M5488613 M5523640 M548863 M55236513 ANSI3\"150LBS M552367 M5523673 M5523650 M55236503 M5523671 M5488633 ANSI3\"300LBS M548864 M5488643 M548862 M5488623 M548866 M55236713 ANSI4\"150LBS M551564 M5515643 M5523670 M55236703 M5515641 M5488663 ANSI4\"300LBS M548867 M5488673 M548865 M5488653 M548869 M552371 M5523713 M5515640 M55156403 M5523711 M55156413 M552372 M5523723 M5523721 M5488693 M548868 M5488683 M55237113 M5523710 M55237103 M55237213 M5523720 M55237203 FOR GASKET CHANNEL : (DIN 2512N) M5488253 DN25 PN40 M548825 M5488223 M548826 M5488263 M548827 M5488273 M5488193 M548823 M5488233 M548824 M5488243 DN50 PN40 M548822 M548820 M5488203 M548821 M5488213 DN80 PN40 M548819Multidimensional flangecoupling COUPLING TYPE G1 std. G1 std. HC G1 hyg. G1 hyg. HC G1 Exi G1 Exi HC D ORDER CODE ORDER CODE ORDER CODE ORDER CODE ORDER CODE ORDER CODE 92 M1050030 M10500303 M1050031 M10500313 M1050032 M10500323 127 M1050033 M10500333 M1050034 M10500343 M1050035 M10500353

Index 106Mounting couplings for Satron VG transmitter G150 ØD 10.2.2015 Pipe Dim. Dim. Dim. Dim. Order code Material size Ødu AB ØD 80 96 DN15 80 83 101 20 +0.5 M1050303xx Should be mentioned in DN20 80 86 108 +0.2 M1050304xx the order DN25 80 M1050305xx +0.2 Ø20.5 91 117 +0.5 M1050306xx Should be mentioned in +0.1 DN32 80 95 127 M1050307xx the order Ødu DN40 100 103 141 25 +0.2 M1050308xx DN50 100 Should be mentioned inG1 Ø25 32 +0.5 the order +0.2 Should be mentioned in 40 +0.5 the order +0.2 Should be mentioned in 50 +0.5 the order +0.2 Should be mentioned in 63 +0.5 the order +0.2 A Plastic coupling G1 for plastic B pipes DN15 - DN50Coupling G1 / Varivent TN Hygienic Coupling G1 / Ø38 Seal plug assembly for Satron coupling G1Order code (AISI316L): Order code: M1050577 - AISI316L M1050577HC By seal plug the coupling can be- DN25 M1050090 - Hastelloy C closed tightly.- DN50/40 M1050091- DN80/65 M1050092 Order code: - AISI316L - EHEDG M550405 M1050389Welding assistant for Satron Special adapter for Satron Seal for Satron couplings G1.coupling G1. couplings G1. Enables to seal the leaking metalIt is always recommendable to use By using this adapter it is possible to metal taper.the welding assistant while welding to install the sensor head ca. 3mmthe coupling to prevent any deep into the coupling. Order code: T546022distortions due to heat. - PTFE Order code:Order code: - EN 1.4462 (Duplex) M1050294- Brass M1050420

Index 107Mounting couplings for Satron VT Transmitters G160 01.01.2015 Process couplings with DIN 3852-X thread Order code: AISI316L Order code Thread A Du 0 Length L d4 a1 - 0.5 18,5 Ø27 2.5 23.5 Ø40 2.5 M1050369 G½ Ø30 32.5 Ø56 2.5d4 26.5 Ø56 2.5 G¼ M1050390 G1 Ø45 33 Ø69 3.0 M1050391 G1½ A Ø60 A M1050393 G1½ Ø60 Ø20M1050392 G2 Ø75 Du Du a1 G3/8L Ø28 G½Process couplings with NPT thread Ø28 Order code: AISI316L Order code Thread A Du Length L M1050368 ½-14 NPT Ø28 14 M1050500 ¾-14 NPT Ø35 16 M1050501 1 - 11½ NPT Ø44.5 20.5 M1050502 1¼ - 11½ NPT Ø57.5 20.5 M1050503 1½ - 11½ NPT Ø63.5 20.5 L M1050504 2 - 11½ NPT Ø76 20.5 30 30 20Process coupling DIN 16288 - G¼ Process coupling G½ Process coupling DIN 16288 - G½Order code: M1050366 Order code: M1050316 Order code: M1050367- AISI316L - AISI316L - AISI316LØ27 G½ Ø18,3 Ø30 Ø26,5 Ø33,5 2 23,5 25,5Process coupling DIN 3852 - X - Process coupling PMC 1\"G½, for transmitter with two o-ringOrder code: Order code: - AISI316L- AISI316L M1050515 M1050300 Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 108Mounting couplings for Satron VT Transmitters G160 01.01.2015 ØD out T-coupling DIN 3852-X-G½ Ø27 +0.4 G½B A Order codes: AISI316L 2.5 Pipe Dim. Dim. Dim. Dim. Dim. Dim. Order code Ød size øD out A B C Ød E C DN15 40 27.5 43.5 36 22 0 29.5 M1050395 DN20 40 30.5 26 M1050396 DN25 50 33.5 49 42 27.5 +0.3 29.5 M1050397 55.5 48 0 34 +0.5 +0.2 Other size, please contact Satron Instruments Inc. E Coupling flange DIN 3852-X-G½ - for the transmitter with two o-rings Tilauskoodit: AISI316L G½ ORDER CODE TYPE OF FLANGE M1050517-DN25 DN 25 PN 40 M1050517-DN40 DN 40 PN 40 M1050517-DN50 DN 50 PN 40 M1050517-DN80 DN 80 PN 40 M1050517-DN100 DN 100 PN 16 M1050517-1-150 ANSI 1\" 150 LBS M1050517-1-300 ANSI 1\" 300 LBS M1050517-2-150 ANSI 2\" 150 LBS M1050517-2-300 ANSI 2\" 300 LBS M1050517-3-150 ANSI 3\" 150 LBS M1050517-3-300 ANSI 3\" 300 LBS M1050517-4-150 ANSI 4\" 150 LBS M1050517-4-300 ANSI 4\" 300 LBS L Special flanges, please contact Satron Instruments Inc. A Welding assistant: Order codes A L Order code Thread A Dim. L Position, form and size M1050516 G½A 25 6-k, AV22 M1050375 G¾A 15 6-k, AV27 M1050371 G1A 20 6-k, AV36 M1050372 G1 ¼A 35 4-k, AV22 M1050373 G1 ½A 35 4-k, AV22 M1050374 G2A 35 4-k, AV22

Index 109

Ind)ex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

Index 111 ! , \" !# ! $ !% & ' ' \" #$ , !! \"# $$ \" %% & '(!! ) \"$ $% ! ! % $ *$! \" %% & '( * \"$% \" %% & '( *\" $ %& ' \" + $% \"* \" \" + $% ,!! * \" && ! $ $% + (' - \" & . & / !! + ' \" +\" ! & / !& ' (\" \"\" $ $ &$ / & !' \" '!+ ( $ &$ & $ $ !\" $ ' $/ \" 0$ $ !! $ \" 1 / $ !\" ' /! \" $ $/ &$ & $ ( !! $ ' & + \" !! $ )* % ' ' $+ $& * 23 3 - . 4565 7 ) & (- 8 9 23 8 -$ '&

Index 112 %& # $ $$ ' &( & & ! \"#$ % ( &' & & &' & & &' & & ## \"#) * + ( + + & \"#\" , (( & & ,+ -( -% & -' * - , . # )- . # \" /01) ## . # 2 /01) 3+ 4 +$ + +( 5 67 +) + +( 5 67 +\" !\" + +( 6 67 +2 4

Index 113SATRON HPS Hydraulic Pressure Seal BP415 2012-08-15 The Hydraulic Pressure Seal SATRON HPS is used in pressure measurement applications where the process medium is aggressive and it is necessary to protect the wetted parts of measuring transmitters. Processes' hygienic requirements may also necessitate the use of the pressure seal. In addition, the pressure seal has to be used when the process temperature exceeds the transmitter's specifications.Technical specifications Process connections Fill fluids Silicone oil DC705 • DN25,DN50, DN80, DN100 Silicone oil DC200 • for high-temperature and vacuum • for process and food industry measurement applications (EN 1092-1,flange type 05, facing applications Gaskets (Sanitary Seal) type B), (DIN 2501, form D) Neobee M20 • EPDM, FPM (Viton®) and PTFE • ANSI2\" and 3\" (ANSI B16-5) • for food industry applications • JIS 50, 80, 100 (JIS B 2220) Inert oil (e.g. Fomblin Y04 or • Sandvik Clamp connector DN65 Halocarbon) • TRI-Clamp 1½\", 2\" and 2,5\" (38/51/ • for oxygen and chlorine applications 63,5 mm, ISO2852) • SMS38 and SMS51 • DIN11851 DN25 ... DN50 Other options available on separate order. Process pressures Fill fluid properties • PN10/16, PN40, PN64 and PN100 • 150 and 300 lbs Fill fluid Temperature Density Thermal expansion Viscosity (25°C) • 10K and 50K • Sandvik Clamp: PN64 range/°C g/cm3 coefficient/ 1/°C cSt(mm2/s) • TRI-Clamp: PN40 • SMS and DIN11851 PN25 PN40 DC200 -40...200 0.934 0.00108 9.5 Silicone oil Measurement ranges DC705 20...380 1.090 0.00080 175 Above 25 mbar span, depending on the Silicone oil -45...175 1.850 0.000864 6.5 measuring diaphragm's size and the process pressure. Inert oil Materials NeobeeM20 -17...200 0.917 0.001008 9.8 HPS body: EN 1.4401 (AISI 316) Process coupling: EN 1.4404 (AISI Fill fluid steam pressure curves (specified by manufacturers) 316L) Capillary tube Temperature/°C 250 • Capillary: EN 1.4401 (AISI 316) 200 • Casing: EN 1.4401 (AISI 316) 150 DC200/10 Length selectable between 2 and 20 m. 100 Halogarbon Recommendation: As short as possible. Neobee M20 The capillary's minimum permissible 50 bending radius is 50 mm. 0 We recommend capillaries of equal length for differential pressure 0 measurements in varying temperature 10 conditions. 20 30 Diaphragm materials 40 EN 1.4435 (AISI 316L), CoNi-alloy, 50 Duplex (EN 1.4462), Hastelloy C22 60 (EN 2.4602) / C-276 (EN 2.4819), 70 Inconel 600 (EN 2.4816), Monel 400 80 (EN 2.4360), Nickel (EN 2.4066), 90 Tantalum, Titan Ti-II (3.7035) and 100 Zirkonium 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 350 450 550 650 750 850 950 Pressure/mbar abs. Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 114SATRON HPS Hydraulic Pressure Seal BP415 2012-08-15HPS types: construction SATRON HPS D SATRON HPS TRI-C - Mounted between - Mounted on Tri-Clamp two flanges (ISO2852) - Sanitary seals SATRON HPS F SATRON HPS SMS - Flange-mounted - Sanitary seals - Female Rd-thread pressure seal SATRON HPS E SATRON HPS DIN11851 - Flange-mounted - Sanitary seals - Female Rd-thread with extension SATRON HPS S SATRON HPS SMS-SI - Mounted on - Sanitary seals - Female Rd-thread Sandvik Clamp - Sanitary seals 2

Index 115SATRON HPS Hydraulic Pressure Seal BP415 Mounting dimensions 2012-08-15 d2 ød 4 ød b E b k D Type F Type E 120 Ød1 22 Type D FLANGE FLANGE FLANGE DIMENSIONS HOLES EXTENS. SIZE CODE b D Ød4 Ød1 Kpl d2 k Ød -0.2 ISO DN25 PN10/16 ISO DN25 PN40 D1A 16 115 68 70 4 14 85 - ISO DN25 PN64 ISO DN25 PN100 D1B 18 115 68 70 4 14 85 - ISO DN50 PN10/16 ISO DN50 PN40 D1C 24 140 68 70 4 18 100 - ISO DN50 PN64 ISO DN50 PN100 D1D 24 140 68 70 4 18 100 - ISO DN80 PN10/16 ISO DN80 PN40 D2A 18 165 102 105 4 18 125 51 ISO DN80 PN64 ISO DN80 PN100 D2B 20 165 102 105 4 18 125 51 ISO DN100 PN10/16 ISO DN100 PN40 D2C 26 180 102 105 4 22 135 51 ANSI 2\" 150 lbs ANSI 2\" 300 lbs D2D 28 195 102 105 4 26 145 51 ANSI 3\" 150 lbs ANSI 3\" 300 lbs D3A 20 200 138 140 8 18 160 73 ANSI 4\" 150 lbs ANSI 4\" 300 lbs D3B 24 200 138 140 8 18 160 73 JIS 10K-50 JIS 40K-50 D3C 28 215 138 140 8 22 170 73 JIS 10K-80 JIS 40K-80 D3D 32 230 138 140 8 26 180 73 JIS 10K-100 JIS 40K-100 D4A 20 220 158 166 8 18 180 73 D4B 24 235 162 166 8 22 190 73 A2A 23 152 92 99 4 20 120.6 51 A2B 25 165 92 105 A3A 26 191 127 130 8 20 127 51 A3B 31 210 127 143 A4A 26 229 157 168 4 20 152.4 73 A4B 34 254 157 175 J2A 16 155 96 96 8 23 168.3 73 J2B 26 165 105 105 J3A 18 185 126 126 8 20 190.5 73 J3B 32 210 140 140 J4A 18 210 151 151 8 23 200 73 J4B 36 250 165 165 4 19 120 51 +0.4 E - 0.4 8 19 130 51 CODE 2 51 8 19 150 73 4 102 6 152 8 23 170 73 8 19 175 73 8 25 205 73 3

Index 116SATRON HPS Hydraulic Pressure Seal BP415 2012-08-15Selection table : Flanged Seal HPSProcess connection typeD PancakeF FlangedE Flanged with extensionProcess connection standadD DIN (Deutsches Institut für Normung)A ANSI/ASME B16.5 (American National Standards InstituteJ JIS (Japanese Industrial Standards)Process connection size ANSI JIS DIN - - 2\" 501 25 3\" 802 50 4\" 1003 804 100Pressure class of process connection (maximum working pressure) DIN ANSI JISA PN10/16 150lbs 10KB PN40 300lbs 40KC PN64 - -D PN100 - -Extension length (only codes D and F)0 No extension (only code E)2 Extension 51 mm (only code E)4 Extension 102 mm (only code E)6 Extension 152 mmFlange material / in type E also extension material2 EN 1.4404 (AISI316L)3 Hastelloy C-276 (EN 2.4819)8 Duplex (EN 1.4462)Diaphragm material 7 CoNi-alloy1 Nickel (EN 2.4066) (***) 8 Duplex (EN 1.4462)2 EN 1.4435 (AISI316L) H Hastelloy C22 (EN 2.4602)3 Hastelloy C-276 (EN 2.4819) M Monel 400 (EN 2.4360)4 Inconel 600 (EN 2.4816) Z Zirkonium (***)5 Tantalum6 Titan TI-II (EN 3.7035) (***)Diaphragm thickness P PTFE sinteredE 0.05 mm (*)F 0.10 mm (**)Diaphragm coating0 No coating9 Gold / RhodiumY DiamondFill fluidS Silicone oil DC200A Neobee M20, oil for food industryG Inert oilD Silicone oli DC705 (*) = Not Inconel, Monel, Nickel or Zirkonium (**) = Not Tantalum (***) = Not connection type E (with extension) 4

Index 117

Index 118SATRON HPS Hydraulic Pressure Seal BP415 2012-08-15Mounting dimensions type SMS Mounting dimensions type DIN11851 AA g ØD Ød6 Dimensions Size Dimensions Thread ØD A Size 54 21 Thread DN25 PN25 Ød6 g A Rd 52 x 1/6 64 23 DN32 PN25 Rd 58 x 1/6 38 Rd 60 x 1/6 DN40 PN25 44 10 49 Rd 65 x 1/6 51 Rd 70 x 1/6 DN50 PN25 Rd 78 x 1/6 50 10 49 56 10 49 68,5 11 50Mounting dimensions type SMS-SI SMS-SI couplings : L2 L1 AE ØD Ød ØD for pipe for vessel Dimensions Thread Size Dimensions 38 L1 Ød L2 Size ØD A E Rd 60 x 1/6 51 27 38,5 24 ØD Thread 54 21 24 Rd 70 x 1/6 30 51 25 60 Rd 60 x 1/6 SI38 64 23 27 70 Rd 70 x 1/6 SI51 6

Index 119SATRON HPS Hydraulic Pressure Seal BP415 2012-08-15 Hydraulic Pressure Seal Connections Capillary connection 120 120 Seal on Low or High pressure side of Same seal on both High and Low pressure sides Differential PressureTransmitter, code H or K of Differential Pressure Transmitter, code L Selection table Capillary connection type 120 H Seal on High pressure Seal on High pressure side of pressure side of Differential Transmitter transmitter, process connection G½A, code M K Seal on Low pressure 7 side of Differential Transmitter L Same seal on both High and Low pressure side of Differential Transmitter M Seal on High pressure side of Pressure Transmitter, process connection G½A Capillary length (m) 2...20 Mounting bracket for transmitter 0 No mounting bracket 1 Angle mounting bracket 2 Mounting plate Documentation IE English IF Finnish Material certificate 0 No material certificate MC1 SFS-EN 10204-2.1 (DIN50049-2.1) MC2 SFS-EN 10204-2.2 (DIN50049-2.2) MC3 SFS-EN 10204-3.1B (DIN50049-3.1B)

Index 120SATRON HPS Hydraulic Pressure Seal BP415 2012-08-15Hydraulic Pressure Seal ConnectionsDirect mounted connection Seal on High pressure side of Seal on High pressure side of Differential Pressure Transmitter, Differential Pressure Transmitter, angle model, code P straight model, code RSelection table Seal on High pressure side of Pressure Transmitter, processDirect mounted connection type connection G½A, straight model, code SP Seal on High pressure side of 8 Differential Transmitter, angle modelR Seal on High pressure side of Differential Transmitter, straight modelS Seal on High pressure side of Pressure Transmitter, process connection G½A, straight modelDocumentationIE EnglishIF FinnishMaterial certificate0 No material certificateMC1 SFS-EN 10204-2.1 (DIN50049-2.1)MC2 SFS-EN 10204-2.2 (DIN50049-2.2)MC3 SFS-EN 10204-3.1B (DIN50049-3.1B)

Index 121

Index 122SATRON HPS Hydraulic Pressure Seal BP415 2012-08-15 Type SMS-SI Pressure seal Type DIN11851 O-ring Gasket Pressure seal Coupling Tyyppi SMS Coupling Coupling Gasket Pressure sealSpecification example: SATRON HPS KA23E0S10-M52IE0- Process connection type, sanitary DN25 DIN11851- Material of body: EN 1.4404 (AISI316L)- Diaphragm material: Hastelloy C-276 (EN 2.4819)- Diaphragm thickness: 0.05mm- No diaphragm coating- Fill fluid: silicone oil- Material of process gasket: EPDM- No mounting parts- Capillary type connection: - Seal on high pressure side of Pressure Transmitter - Capillary length 5m - Mounting bracket for transmitter, type mounting plate - Documentation: English - No material certificationRecommended minimum process pressurefor vacuum applications Minimum pressure for different fill fluids (kPa, abs.) Tproc. DC200 Inert oil °C 100 cSt 20 5 8 Hastelloy is the registered trademark of Haynes International. 40 8 10 Teflon is the registered trademark of E.I. du Pont de Nemours & Co. 80 10 28 Viton is the registered trademark of DuPont Dow Elastomers. 120 15 53 160 25 90 We reserve the right for technical modifications without prior notice. 200 40 - 10

Index 123SATRON HPS BA / BB 115061002-EN Hydraulic Pressure Seal 30.06.2012 The Hydraulic Pressure Seal SATRON HPS is used in pressure measure- ment applications where the process medium is aggressive and it is neces- sary to protect the wetted parts of measuring transmitters. Processes' hygienic requirements may also ne- cessitate the use of the pressure seal. In addition, the pressure seal has to be used when the process tem- perature exceeds the transmitter's specifications.Technical specificationsProcess connections• Thread M45 x 2Process pressures• PN200Measurement ranges Fill fluid propertiesAbove 25 mbar span, depending on themeasuring diaphragm's size and theprocess pressure.Materials Fill fluid Temperature Density Thermal expansion Viscosity (25°C)HPS body: EN 1.4404 (AISI 316L), EN1.4462 (Duplex) range/°C g/cm3 coefficient/ 1/°C cSt(mm2/s)Capillary tube DC200 -40...200 0.934 0.00108 9.5• Capillary: AISI 316 Silicone oil• Casing: AISI 316Length selectable between 2 and 20 m. DC705 20...380 1.090 0.00080 175Recommendation: As short as possible. Silicone oilThe capillary's minimum permissiblebending radius is 50 mm. Inert oil -45...175 1.850 0.000864 6.5We recommend capillaries of equal lengthfor differential pressure measurements in Neobee M20 -17...200 0.917 0.001008 9.8varying temperature conditions.Diaphragm materials Recommended minimum process pressureAISI 316L (EN 1.4435), CoNi-alloy, Duplex for vacuum applications(EN 1.4462), Hastelloy® C22 / C-276 (EN2.4819), Inconel 600 (EN 2.4816), Tantalum Minimum pressure forFill fluids different fill fluids (kPa, abs.)Silicone oil DC200• for process and food industry applica- T DC200 Inert oiltions proc.Neobee M20• for food industry applications °C 100 cStInert oil (e.g. Fomblin Y04 or Halocarbon)• for oxygen and chlorine applications 20 5 8Silicone oil DC705 40 8 10• for high-temperature and vacuum me- 80 10 28asurement applications 120 15 53 160 25 90Gaskets 200 40 -• FPM (Viton®) Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 124SATRON HPS BA / BB Hydraulic Pressure Seal 115061002-EN 30.06.2012Selection table: M45 x 2 Seal HPSProcess connection typeBA M45 x 2 with o-ringBB M45 x 2 with o-ring + metal/metal taperBody material, wetted parts2 AISI316L (EN 1.4404) 8 Duplex (EN 1.4462), std.3 Hastelloy C-276 (EN 2.4819) Hastelloy C276 (EN 2.4819) TantaaliDiaphragm material 32 AISI316L (EN 1.4435) 54 Inconel 600 (EN 2.4816)8 Duplex (EN 1.4462)Diaphragm thickness F 0.10 mmE 0.05 mmDiaphragm coating P PTFE sintered0 No coating Y Diamond9 Gold / Rhodium GFill fluid D Inert oilS Silicone oil DC200 Silicone oil DC705A Neobee M20, oil for food industryMounting parts0 No mounting parts1 Coupling2 Pasve BA mounting valve, specify separately in the order 2

Index 125SATRON HPS BA / BB Hydraulic Pressure Seal 115061002-EN 30.06.2012 Mounting dimensions, type BA Mounting dimensions, type BB 3

Index 126SATRON HPS BA / BB Hydraulic Pressure Seal 115061002-EN 30.06.2012Hydraulic Pressure Seal ConnectionsCapillary connection Seal on Low or High pressure side of Diffe- Same seal on both High and Low pressure sides rential PressureTransmitter, code H or K of Differential Pressure Transmitter, code LSelection tableCapillary connection type Seal on High pressure side of pressure trans-H Seal on High pressure mitter, process connection G½A, code M side of Differential Transmitter 4K Seal on Low pressure side of Differential TransmitterL Same seal on both High and Low pressure side of Differential TransmitterM Seal on High pressure side of Pressure Transmitter, process connection G½ACapillary length (m)2...20Mounting bracket for transmitter0 No mounting bracket1 Angle mounting bracket2 Mounting plateDocumentationIE EnglishIF FinnishMaterial certificate0 No material certificateMC1 SFS-EN 10204-2.1 (DIN50049-2.1)MC2 SFS-EN 10204-2.2 (DIN50049-2.2)MC3 SFS-EN 10204-3.1B (DIN50049-3.1B)

Index 127SATRON HPS BA / BB Hydraulic Pressure Seal 115061002-EN 30.06.2012 Hydraulic Pressure Seal Connections Direct mounted connection Seal on High pressure side of Diffe- Seal on High pressure side of Diffe- rential Pressure Transmitter, angle rential Pressure Transmitter, straight model, code P model, code R Selection table Seal on High pressure side of Pressure Transmitter, process Direct mounted connection type connection G½A, straight model, code S P Seal on High pressure side of 5 Differential Transmitter, angle model R Seal on High pressure side of Differential Transmitter, straight model S Seal on High pressure side of Pressure Transmitter, process connection G½A, straight model Documentation IE English IF Finnish Material certificate 0 No material certificate MC1 SFS-EN 10204-2.1 (DIN50049-2.1) MC2 SFS-EN 10204-2.2 (DIN50049-2.2) MC3 SFS-EN 10204-3.1B (DIN50049-3.1B)

Index 128SATRON HPS BA / BB Hydraulic Pressure Seal 115061002-EN 30.06.2012Specification example: SATRON HPS BB88E0S0-M52IE0- Process connection type: Thread M45 x 2 with o-ring + metal/metal taper- Body material: EN 1.4462, Duplex- Diaphragm material: EN 1.4462, Duplex- Diaphragm thickness: 0.05mm- No diaphragm coating- Fill fluid: silicone oil- No mounting parts- Hydraulic Pressure Seal Connections: Capillary type connection - Seal on High pressure side of pressure transmitter, process connection G½A, - Capillary length 5m - Mounting bracket for transmitter, type mounting plate - Documentation: English - No material certificationWelding the coupling 52,5 Welding plug, brass M1050473 Ø60 Welding sequence Hastelloy is the registered trademark of Haynes International. Teflon is the registered trademark of E.I. du Pont de Nemours & Co. Viton is the registered trademark of DuPont Dow Elastomers. We reserve the right for technical modifications without prior notice.

Index 129

Index 130Actuators and accessories 5/04 ACTUATORS April 30, 2010 - PISTOR 75 pneumatic power cylinder ................................................................................ Spec. EZ510 Satron Instruments Inc., P.O.Box 22, FIN-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 131PISTOR 75 pneumatic power cylinder EZ510 Febr. 15, 1989The pneumatic PISTOR power cylindercan be used as an actuator in manualand automatic control of control valvesand louvers.Technical specification Type PISTOR 75/150 PISTOR 75/300 Piston diameter: 75 mm 75 mm Stroke S: 150 mm 300 mm Effective cross-sectional area of piston: 41 cm2 41 cm2 Output force - for 3 bar supply pressure: 1200 N 1200 N - for 6 bar supply pressure: 2400 N 2400 N Output work (moment of force) - for 3 bar supply pressure: 180 Nm 360 Nm - for 6 bar supply pressure: 360 Nm 720 Nm Typical time for full stroke: Weight: 12 s 20 s 2.8 kg 3.4 kgSupply pressure: 3 to 6 bar. Sensitivity: 0.3 %.Control pressure range Load effect- with standard adjustment: - for a load change from 0 to 80 % of the max. force obtainable for the 0.2 to 1.0 bar supply pressure in use, the effect is- on separate order: 4 % of max.stroke per 1000 N. 0.4 to 0.9 bar spans. Materials We reserve the right to make technical - body: light alloy with epoxy powder changes without prior notice.Operating temperature: paint, bearing bush of bronze Performance is indicated in accordance with-10 to +80 °C - piston rod: ground and polished IEC546 and IEC770 recommendations. AISI 316 acid-resistant steelAir consumption - piston and 0-rings: silicone rubber- for 3 bar supply pressure: (max. 80°C). 15 litres/min (at STP) Connections- for 6 bar supply pressure: - 1/4-18NPSF female threads. 25 litres/min (at STP)Max. error of adjustment: ± 2 %. Satron Instruments Inc., P.O.Box 22, FIN-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 132 !\"#$% \"# & & \"## \"' \"# & ( & )*+, -\"./ 0 ./ 1 02 1 ! \"# $ %&% # ' ! \"# $ %&% # (((

Index 133SATRON VO Turbidity and solids content sensor rBeAv.290.06 8.6.2016SATRON VO turbidity and solids content analyzer issuitable for the measurement of different liquids. Sa-vings can be obtained by using SATRON VO analyzerin process industries, e.g. the use of clean water can beminimized, the time used for the cleaning (CIP) will beshortened, the use of the end product (in dairy applica-tions: milk) and the use of cleaning materials needed inthe process can be optimized. The transmitter communi-cates digitally using the HART® protocol.TECHNICAL SPECIFICATIONSMeasuring range and span Viton® and NBR. Current output2See Selection Chart. Housing with PLUG DIN 43650 con- nector, code H0S: Internal power supplyZero and Span adjustment Housing: AISI303/316, Seals: Viton®Zero elevation: Calibrated span is and NBR. Current output 2 has same ground asfreely selectable on the specified range PLUG connector: PA6-GF30 jacket,depending from the desired option. Silicone rubber seal, AISI316 binary IOThis can be made by using keyboard retaining screw.(display option) or HART®275/375 Maximum load 400 Ωcommunicator. Connection hose between sensing element and housing Range 3.5...23 mADamping Codes L and R :- Time constant is continuously PUR signal cable or hose protected Factory setting 4...20 mA with PTFE/AISI316 braiding adjustable 0.01 to 60 s. External power supply CalibrationRepeatability For customer-specified range with Current output 2 is galvanically isolated- 0.1% from maximum span. minimum damping. (If range is not specified, transmitter is calibrated for Maximum supply voltage 35 VDCTemperature limits maximum range.)Ambient: -30 to +80 °C Range 3.5...23 mAProcess: 0 to +100 °C / +140 °C (VOF)-5 to +100 °C / +140 °C (VOM & VOD) Factory setting 4...20 mAShipping and storage: -40 to +80 °C. Maximum load, See picture belowOutput 3-wire (3W), 4-20 mA Maximum isolation voltage 100 VDCSupply voltageNominal 24 VDC, (21,6 - 27,6V) Process connections - With G1 connecting threadHumidity limits 0-100 % RH - Tri-Clamp 25/38 and 40/51EMC directive 2004/108/EC Electrical connections Protection class: See Selection chart.- EN 61326-1:2005 Housing with PLUG connector, code H0S: WeightCONSTRUCTION Connector type DIN 43650 model AF; Housing with PLUG DIN43650Materials: Pg9 gland for cable; wire cross-section connector (H0T ): 0.9 kgSensing element 1): AISI316L, Dup- 0.5 to 1.5 mm2. Housing with M12lex (EN. 1.4462), Hast. C276/C22, or connector (H0S ): 0.9 kgTitanium Gr2. Housing with M12 connector, code H0T: Housing with displaySurface quality: Polished Ra <0,8µm M12 plug connector (N0S & N0T): 1.3 kgLens: quartz glass, Safir glass or Remote Housing (L): 2.5 kgPC plastic Housing with display, code N0S: Remote sensor (R): 2.5 kgCoupling 1): AISI316L, Duplex (EN Connector type DIN 43650 model AF;1.4462), Hast.C276 or Titanium Gr2 Pg9 gland for cable; wire cross-sectionOther sensing element materials: 0.5 to 1.5 mm2.AISI316, SIS 2343. Housing with display, code N0T:Pressure class: M12 plug connector- PN40- Test pressure -1 to 30 bar I/O-connections 35 V bout1-3 50 mAHousing with display, Relay, grounding contact 10 µAcodes N0S & N0T: Maximum voltageHousing: AISI303/316, Seals: Nitrile- Maximum currentrubber and Viton®, Maximum leakage currentNameplates: Polyester bin1-3 OFF Min. load using HART®-Housing with M12 connector, code NC (no connection) ON communication 250 RH0T: Housing: AISI303/316, Seals: 0...2 V R max = Supply voltage -5 V Minimum values for switch in use I max Voltage 16 V I max = 20,5 mA I max = 22,5 mA Current 4 mA (when the alarm current 22,5 mA is on) Leakage current 1 mA Current output 2 External power supply Current output1 3.5...23 mA Range 600 Ω 1) Parts in contact with process medium Maximum load Factory setting 4...20 mA Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 134SATRON VO Turbidity and solids content sensor rBeAv.290.06 8.6.2016Dimensions and Housing types VOM 20048 25 G1A H0T-Housing 240159 49.5 25 6.2 110 G1A PG9 N0S-Housing 120 200 48 25 G1A 95 90 L-Housing PG9 std. Standard = PVC 10 meter

Index 135SATRON VO Turbidity and solids content sensor rBeAv.290.06 8.6.2016 Tri-Clamp 25/38 ja 40/51 64 25 VOM with Tri-Clamp process connections, codes TA and TB G1A 190 60 NR Housing Standard = 10meter PVC 132 VOM with remote sensor, housing type code R

Index 136SATRON VO Turbidity and solids content analyzer rBeAv.290.06 8.6.2016Dimensions and housing type VOF H / B1-housing L / B1-Housing Standard = 15 meter VOF with valve Dimensions and housing type VODFor easy installation the VOD is standard equipped with Tuchenhagen Type N but is is availablewith many different process connections. The process pipe is NOT included.Contact Satron for other possibilities, the picture above is a VOD equipped with G1\" process con-nection, and a pipe with 51 Tri-clamp.

Index 137SATRON VO Turbidity and solids content analyzer rBeAv.290.06 8.6.2016Instructions and spare parts that are according and within the 3-A applianceWelding the coupling 46 - 03These instructions apply to hygienic welded couplings; welding the G1 Welding Sequence Polished Ra <0,8standard coupling is described here as an example. Welding assistant M1050420• Place the coupling in the mounting hole as shown in Fig. 1‑4. Makesure the leakage detection port is down. Then weld with several runs soto prevent the coupling’s oval distortion and tightness problems.The inside welding must be cleaned, and polished with an end result ofRa <0,8• The analyzer must be out of the coupling while the coupling iswelded.You can use the shut‑off plug shown in Fig. 1‑5 to shut thecoupling. The plug protects the coupling’s sealing face and permits thestarting of the process without the transmitter.• It is always recommendable to use the welding assistant (M1050450)while welding the coupling to prevent any distortions due to heat.• Do not make weld grounding via any analyzer's body!Mounting the analyzer on the couplingProcedure• Make sure that the coupling’s sealing face is clean.• Remove the orange protective plug from the analyzer head.• Insert the analyzer in a straight line into the coupling, so that the guide groove on the transmitter aligns with the stop pinon the coupling. The analyzer settles into position when the groove and pin are aligned, and will be prevented from rotating inthe coupling.When inserting the analyzer, be careful not to damage the edge of the lens on the edges of the coupling or on theend of the stop pin!• Lock the transmitter in position by screwing the hex nut fully home. Finger tightness is sufficient to tighten the sealing faces.However, we recommend final tightening with a tool to eliminate the effect of vibration and other such factors. Apply 60±20Nm torque.Do not use sealing tape etc. on threaded connection!Spare partsNo. Part name Order code Note 3A 18-03 Class II 1 O-ring EPDM 80031720 3A 18-03 Class I (Do not exceed above 8% fat content). 3A 18-03 Class I1 O-ring FPM (Viton®) 80011720 1 O-ring FFPM(Kalrez®) 80041717 2 Sticker T13252153 Plug cover DIN43650 T13250034 Plug cover M12 T13250055 38/G1\" Welding adapter M1050577A5 45/G1\" Welding adapter M548101A6 Tuchenhagen / Varivent DN25 M1050090A6 Tuchenhagen / Varivent DN50 M1050091A6 Tuchenhagen / Varivent DN65,5 M1050092A7 Tri-clover 25/38 ISO2852 M1050206A7 Tri-clover 40/51 ISO2852 M1050222A7 Tri-clover 63.5 ISO2852 M1050224A

Index 138SATRON VO Turbidity and solids content analyzer rBeAv.290.06 8.6.2016Housing with display, code N Wiring Housing with M12-connector, code HTKeyboard :Esc = Press Esc move back towards the top of the main menu. = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value. = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value.Enter = Press ENTER to move to a lower level in a menu or to accept a command or parameter value Wiring Wiring Housing with PLUG DIN43650-connector, code HS Housing with PLUG DIN43650- and M12-connector, test connector box, code HT & HS

Index 139SATRON VO Turbidity and solids content analyzer rBeAv.290.06 8.6.2016Wiring WiringHousing with display and PLUG DIN43650-connector, Housing with display and M12-connector, code NTcode NSWiringRemote electronics housing with display, code L

Index 140SATRON VO Turbidity and solids content analyzer rBeAv.290.06 8.6.2016 Selection Chart Adjustability Span, min Span, max VOM 1000 FTU 5000 FTU VOF(*) 50 FTU 1500 FTU VOD 50 FTU 15 00 FTU Process temperature limits N Normal version -5...+100 °C (VOM & VOD), 0...+100 °C (VOF) H(**) High temperature -5...+140 °C (VOM & VOD), 0...+140°C (VOF) Output S 4-20mA DC/HART® for use with 230VAC 50Hz J 4-20mA DC/HART® for use with 110VAC 60Hz Material of Body Lens Seal 3A 18-03 wetted parts 2 AISI316L 2 Sapphire glass 1(***) EPDM Class II 3 Hast. C 276 4 Spinel 2 FPM (Viton®) Class I 6 Titanium Gr2 8 Duplex (EN 1.4462) 3 FFPM (Kalrez®) Class I 9 Peek Housing type N Housing with display and pushbuttons H Housing with, no display, (only one mA output) L Remote electronics housing with display Probe type 0 No remote probe R Remote measuring probe (not available with L housing), IP68 Connection type S DIN43650 with PG9, IP66 T M12, IP67 V PG9 (always with L housing), IP66 Cable Material 0 No VOD, L or R selected 1 PUR cable. 2(*) AISI316L braided PTFE hose. 3 Steel reinforced PUR hose. 4 PVC cable Cable length 0 No VOD or L, R option selected 5 25 M. 1 5 M. 3 15 M. (PUR std.) ... 2 10 M. (PVC std.) 4 20 M. Light source 2 365nm 4 540nm 6 640nm 8 950nm 3 460nm 5 580nm 7 880nm Process connections G1 Standard G1A thread + Oring TA Tri-Clamp 25/38 (ISO 2852) TB Tri-Clamp 40/51 (ISO 2852) TN Tuchenhagen \"N\" type DN50 HX (*) Fixed mounting tube, (specify length) B1 (*) G1A ball valve insertion. Extension 19cm diameter ø 24mm BX (*) G1A ball valve insertion. Extension by request diameter ø 24mmDocumentationCalibration certificate AE EnglishInstallation and operating instructions IE English IF Finnish FR FrenchMaterial certificates0 No material certificateMC1 Raw material certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw material certificate for wetted parts, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2) standardMC3 Raw material certificate for wetted parts, in accordance with SFS-EN 10204-3.1 B (DIN 50049-3.1 B) standard* Not EHEDG certified & Not within the 3A approval** Only in combination with Quartz, Sapphire lens and Kalrez Seals. And only 880nm*** Do not exceed above 8% fat content. We reserve the right for technical modifications without prior notice. 46 - 03 HART is the registered trademark of HART Communication Foundation. Pasve is the registered trademark of Satron Instruments Inc. Hastelloy is the registered trademark of Haynes International. Viton is the registered trademark of DuPont Down Elastomer. 3-A is a registered mark owned and administered by 3-A SSI.

Index 141SATRON VOA Turbidity and solids content sensor rBeAv.211.00 2.9.2016SATRON VOA turbidity and solids content analyzerIs suitable for the measurement of different liquids. Savingscan be obtained by using SATRON VOA analyzer in processindustries, e.g. the use of clean water can be minimized, thetime used for the cleaning (CIP) will be shortened, the useof the end product (in dairy applications: milk) and the use ofcleaning materials needed in the process can be optimized.The transmitter communicates digitally using the HART®protocol.TECHNICAL SPECIFICATIONSMeasuring range and span Housing with PLUG DIN 43650 con- Current output2See Selection Chart. nector, code H0S: Housing: AISI303/316, Seals: Viton® Internal power supplyZero and Span adjustment and NBR.Zero elevation: Calibrated span is PLUG connector: PA6-GF30 jacket, Current output 2 has same ground asfreely selectable on the specified range Silicone rubber seal, AISI316depending from the desired option. retaining screw. binary IOThis can be made by using keyboard(display option) or HART®275/375 Connection hose between sensing Maximum load 400 Ωcommunicator. element and housing Codes L and R : Range 3.5...23 mADamping PUR signal cable or hose protected- Time constant is continuously with PTFE/AISI316 braiding Factory setting 4...20 mA adjustable 0.01 to 60 s. Calibration External power supply For customer-specified range withRepeatability minimum damping. (If range is not Current output 2 is galvanically isolated- 0.1% from maximum span. specified, transmitter is calibrated for maximum range.) Maximum supply voltage 35 VDCTemperature limitsAmbient: -30 to +80 °C Range 3.5...23 mAProcess: -5 to +100 °C / +140 °CShipping and storage: -40 to +80 °C. Factory setting 4...20 mAOutput 3-wire (3W), 4-20 mA Maximum load, See picture belowSupply voltage Maximum isolation voltage 100 VDCNominal 24 VDC, (21,6 - 27,6V) Process connectionsHumidity limits 0-100 % RH - With G1 connecting thread - Tri-Clamp 25/38 and 40/51EMC directive 2004/108/EC- EN 61326-1:2005 Electrical connections Protection class: See Selection chart. Housing with PLUG connector, codeCONSTRUCTION H0S: WeightMaterials: Connector type DIN 43650 model AF; Housing with PLUG DIN43650Sensing element 1): AISI316L, Dup- Pg9 gland for cable; wire cross-section connector (H0T ): 0.9 kglex (EN. 1.4462), Hast. C276/C22, or 0.5 to 1.5 mm2. Housing with M12Titanium Gr2. connector (H0S ): 0.9 kgSurface quality: Polished Ra <0,8µm Housing with M12 connector, code H0T: Housing with displayLens: quartz glass, Safir glass or M12 plug connector (N0S & N0T): 1.3 kgPC plastic Remote Housing (L): 2.5 kgCoupling 1): AISI316L, Duplex (EN Housing with display, code N0S: Remote sensor (R): 2.5 kg1.4462), Hast.C276 or Titanium Gr2 Connector type DIN 43650 model AF;Other sensing element materials: Pg9 gland for cable; wire cross-sectionAISI316, SIS 2343. 0.5 to 1.5 mm2.Pressure class: Housing with display, code N0T:- PN40 M12 plug connector- Test pressure -1 to 30 bar I/O-connections 35 VHousing with display, bout1-3 50 mAcodes N0S & N0T: Relay, grounding contact 10 µAHousing: AISI303/316, Seals: Nitrile- Maximum voltagerubber and Viton®, Maximum currentNameplates: Polyester Maximum leakage currentHousing with M12 connector, code bin1-3 OFF Min. load using HART®-H0T: Housing: AISI303/316, Seals: NC (no connection) ON communication 250 RViton® and NBR. 0...2 V R max = Supply voltage -5 V Minimum values for switch in use I max Voltage 16 V I max = 20,5 mA I max = 22,5 mA Current 4 mA (when the alarm current 22,5 mA is on) Leakage current 1 mA Current output 2 External power supply Current output1 3.5...23 mA Range 600 Ω 1) Parts in contact with process medium Maximum load Factory setting 4...20 mA Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 142SATRON VOA Turbidity and solids content sensor rBeAv.211.00Dimensions and Housing types VOA 2.9.2016 20048 25 G1A H0T-Housing 240159 49.5 25 6.2 110 G1A PG9 N0S-Housing 120 200 48 25 G1A 95 90 L-Housing PG9 std. Standard = PVC 10 meter

Index 143SATRON VOA Turbidity and solids content sensor rBeAv.211.00 2.9.2016 Tri-Clamp 25/38 ja 40/51 64 25 VOA with Tri-Clamp process connections, codes TA and TB G1 A 190 60 NR Housing Standard = 10meter PVC 132 VOA with remote sensor, housing type code R

Index 144SATRON VOA Turbidity and solids content sensor rBeAv.211.00Instructions and spare parts that are according and within the 3-A appliance 2.9.2016Welding the coupling 46 - 03These instructions apply to hygienic welded couplings; welding the G1 Welding Sequence Polished Ra <0,8standard coupling is described here as an example. Welding assistant M1050420• Place the coupling in the mounting hole as shown in Fig. 1‑4. Makesure the leakage detection port is down. Then weld with several runs soto prevent the coupling’s oval distortion and tightness problems.The inside welding must be cleaned, and polished with an end result ofRa <0,8• The analyzer must be out of the coupling while the coupling iswelded.You can use the shut‑off plug shown in Fig. 1‑5 to shut thecoupling. The plug protects the coupling’s sealing face and permits thestarting of the process without the transmitter.• It is always recommendable to use the welding assistant (M1050450)while welding the coupling to prevent any distortions due to heat.• Do not make weld grounding via any analyzer's body!Mounting the analyzer on the couplingProcedure• Make sure that the coupling’s sealing face is clean.• Remove the orange protective plug from the analyzer head.• Insert the analyzer in a straight line into the coupling, so that the guide groove on the transmitter aligns with the stop pinon the coupling. The analyzer settles into position when the groove and pin are aligned, and will be prevented from rotating inthe coupling.When inserting the analyzer, be careful not to damage the edge of the lens on the edges of the coupling or on theend of the stop pin!• Lock the transmitter in position by screwing the hex nut fully home. Finger tightness is sufficient to tighten the sealing faces.However, we recommend final tightening with a tool to eliminate the effect of vibration and other such factors. Apply 60±20Nm torque.Do not use sealing tape etc. on threaded connection!Spare partsNo. Part name Order code Note 3A 18-03 Class II 1 O-ring EPDM 80031720 3A 18-03 Class I (Do not exceed above 8% fat content). 3A 18-03 Class I1 O-ring FPM (Viton®) 80011720 1 O-ring FFPM(Kalrez®) 80041717 2 Sticker T13252153 Plug cover DIN43650 T13250034 Plug cover M12 T13250055 38/G1\" Welding adapter M1050577A5 45/G1\" Welding adapter M548101A6 Tuchenhagen / Varivent DN25 M1050090A6 Tuchenhagen / Varivent DN50 M1050091A6 Tuchenhagen / Varivent DN65,5 M1050092A7 Tri-clover 25/38 ISO2852 M1050206A7 Tri-clover 40/51 ISO2852 M1050222A7 Tri-clover 63.5 ISO2852 M1050224A

Index 145SATRON VOA Turbidity and solids content sensor rBeAv.211.00 2.9.2016Housing with display, code N Wiring Housing with M12-connector, code HTKeyboard :Esc = Press Esc move back towards the top of the main menu. = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value. = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value.Enter = Press ENTER to move to a lower level in a menu or to accept a command or parameter value Wiring Wiring Housing with PLUG DIN43650-connector, code HS Housing with PLUG DIN43650- and M12-connector, test connector box, code HT & HS

Index 146SATRON VOA Turbidity and solids content sensor rBeAv.211.00 2.9.2016Wiring WiringHousing with display and PLUG DIN43650-connector, Housing with display and M12-connector, code NTcode NSWiringRemote electronics housing with display, code L

Index 147SATRON VOA Turbidity and solids content sensor rBeAv.211.00 Selection Chart 2.9.2016 Adjustability Span, min Span, max VOA 500 FTU 25 000 FTU Depending on process media Process temperature limits N Normal version -5...+100 °C H(**) High temperature -5...+140 °C -30...+200 °C Output S 4-20mA DC/HART® for use with 230VAC 50Hz J 4-20mA DC/HART® for use with 110VAC 60Hz Material of Body Lens Seal 3A 18-03 wetted parts 2 AISI316L 2 Sapphire glass 1(***) EPDM Class II 3 Hast. C 276 4 Spinel 2 FPM (Viton®) Class I 6 Titanium Gr2 8 Duplex (EN 1.4462) 3 FFPM (Kalrez®) Class I 9 Peek Housing type N Housing with display and pushbuttons H Housing with, no display, (only one mA output) L Remote electronics housing with display Probe type 0 No remote probe R Remote measuring probe (not available with L housing), IP68 Connection type S DIN43650 with PG9, IP66 T M12, IP67 V PG9 (always with L housing), IP66 Cable Material 0 No L or R selected 1 PUR cable. 2(*) AISI316L braided PTFE hose. 3 Steel reinforced PUR hose. 4 PVC cable Cable length 0 No L, R option selected 1 5 M. 3 15 M. (PUR std.) 5 25 M. 2 10 M. (PVC std.) 4 20 M. ... Light source 3 RED, INFRA RED & BLUE 4 RED, INFRA RED & GREEN Process connections G1 Standard G1A thread + Oring TA Tri-Clamp 25/38 (ISO 2852) TB Tri-Clamp 40/51 (ISO 2852) TN Tuchenhagen \"N\" type DN50 HX (*) Fixed mounting tube, (specify length) B1 (*) G1A ball valve insertion. Extension 19cm diameter ø 24mm BX (*) G1A ball valve insertion. Extension by request diameter ø 24mmDocumentationCalibration certificate AE EnglishInstallation and operating instructions IE English IF Finnish FR FrenchMaterial certificates0 No material certificateMC1 Raw material certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw material certificate for wetted parts, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2) standardMC3 Raw material certificate for wetted parts, in accordance with SFS-EN 10204-3.1 B (DIN 50049-3.1 B) standard* Not EHEDG certified & Not within the 3A approval** Only in combination with Quartz, Sapphire lens and Kalrez Seals. And only 880nm*** Do not exceed above 8% fat content. We reserve the right for technical modifications without prior notice. 46 - 03 HART is the registered trademark of HART Communication Foundation. Pasve is the registered trademark of Satron Instruments Inc. Hastelloy is the registered trademark of Haynes International. Viton is the registered trademark of DuPont Down Elastomer. 3-A is a registered mark owned and administered by 3-A SSI.

IInnddeexx 148SATRON VCT Optical Consistency Transmitter BCrse2v2. 08 24.01.2017SATRON VCT is an optical consistency transmitter. It is suitable for allpulps consisting of a single grade, in consistency range of 0…7%Cs lo-cated mainly within the mechanical pulp processes (SWG, TMP, PWG andCTMP). Typical applications are measurements to screens, outlet fromlatency removal chest, screen rejects and many others. The Satron VCTcan provide an accurate and reliable consistency measurement withoutneed for regular maintenance.TECHNICAL SPECIFICATIONSMeasuring range and span Device enclosure, code K:See Selection Chart. EN 1.4301 (AISI304)Zero and Span adjustment Calibration Range 3.5...23 mAZero elevation: Calibrated span is For customer-specified range withfreely selectable on the specified range minimum damping. (If range is not Factory setting 4...20 mAdepending from the desired option. specified, transmitter is calibrated forThis can be made by using keyboard maximum range.) Maximum load, See picture below(display option) or HART®275/375communicator. Electrical connections Maximum isolation voltage 100 VDC Housing with PLUG connector, codeDamping H0S: Process connections- Time constant is continuously Connector type DIN 43650 model AF; - With G1 connecting thread Pg9 gland for cable; wire cross-section adjustable 0.01 to 60 s. 0.5 to 1.5 mm2. Protection class: See Selection chart.Repeatability Housing with M12 connector, code H0T: Weight- 0.01% Cs. M12 plug connector Housing with M12 connector (H0T ): 1.3 kgTemperature limits Housing with display, code N0S: Housing with displayAmbient: -30 to +80 °C Connector type DIN 43650 model AF; (N0S & N0T): 1.7 kgProcess: 0 to + 140 °C Pg9 gland for cable; wire cross-section Remote Housing (L): 2.9 kgShipping and storage: -40 to +80 °C. 0.5 to 1.5 mm2. Remote sensor (R): 2.9 kg Device enclosure (K) 6,2 kgOutput 3-wire (3W), 4-20 mA Housing with display, code N0T: M12 plug connectorSupply voltage and permissible load- 24 VDC, -10 %, + 15 %, 100 mA Device enclosures (with display), code- 115/230 VAC, -15% ... +10% (device K: - PG13,5 inlet, 3 pcs enclosure) - The sensor signal M12 plug connector.Humidity limits 0-100 % RHEMC directive 2004/108/EC I/O-connections 35 V- EN 61326-1:2005 bout1-3 50 mA Relay, grounding contact 10 µACONSTRUCTION Maximum voltageMaterials: Maximum currentSensing element 1): AISI316L (EN Maximum leakage current1.4404), Duplex (EN. 1.4462), Hast.C276 (EN 2.4819), or Titanium Gr2. bin1-3 OFFSafir glass NC (no connection) ONCoupling 1): AISI316L (EN 1.4404), 0...2 VDuplex (EN 1.4462), Hast.C276 (EN2.4819) or Titanium Gr2 Minimum values for switch in usePressure class: Voltage 16 V- PN25 Current 4 mA Leakage current 1 mAHousing with display, Current output1 3.5...23 mA Min. load using HART®-codes N0S & N0T: Range 600 Ω communication 250 WHousing: AISI303/316, Seals: Nitrile- Maximum loadrubber and Viton®, Factory setting 4...20 mA R max = Supply voltage -5 VNameplates: Polyester I max Current output2Housing with M12 connector, code I max = 20,5 mAH0T: Housing: AISI303/316, Seals: Internal power supply I max = 22,5 mAViton® and NBR. (when the alarm current 22,5 mA is Current output 2 has same ground as on)Connection hose between sensing Current output 2element and housing binary IO External power supplyCodes L and R :PUR signal cable or hose protected Maximum load 400 Ω 1) Parts in contact with process mediumwith PTFE/AISI316 braiding Range 3.5...23 mA Factory setting 4...20 mA External power supply Current output 2 is galvanically isolated Maximum supply voltage 35 VDC Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

InInddeexx 149SATRON VCT Optical Consistency Transmitter BCs220 24.1.2017 Wiring Wiring Housing with M12-connector, code HT Housing with M12-connector, test connector box, code HT Wiring Remote electronic in the device enclosure. Power supply 115/230 V 50/60 Hz, code K. Only housing type L and probe type R with display. Wiring Remote electronics housing with display, code L

InInddeexx 150SATRON VCT Optical Consistency Transmitter BCs220 24.1.2017 312 20 Dimensions Satron VCT159 110 95 Ø36 Ø24 Ø6,2 PG9 std. 90 120 Satron VCT L-housing