Product Catalogue 2017

Index 51 BLV810 SATRON VV Pressure Transmitter Input Parameters : 01.01.2014 Ui = 28 V Process connections Ii = 93 mA DN50PN40, DN80PN40,ANSI2\" 150 lbs/300 lbs, ANSI3\" Pi = 0.651 W 150 lbs/300 lbs; clamp mounting on angle bracket Ci = 5 nF (see INSTALLATION) Li = 0.2 mH Weight (kg): Special Conditions for Safe Use (X) : · VVF 2.2 kg The enclosure with plastic window and the plastic · VVP 8.7 kg DIN43650 connector must not be installed in · VVH 9.2 kg potentially explosive atmosphere requiring category + 1 kg/m with PVC protective tube 1 apparatus. and 3 kg/m with AISI316 protective The non-conducting surface of the sensor element tube. may be charged by the flow of non-conducting media, so there may be electrostatic hazard with Product Certifications IIC-gases. These units should be marked 2 GD. The equipment shall be installed and connected European Directive Information according to the manufacturers instructions. Electro Magnetic Compatibility (EMC directive 2004/108/EC) All pressure transmittersAtex Directive (94/9/EC) Load / ΩSatron Instruments Inc. complies with the ATEXDirective. 1400 1250European Pressure Equipment Directive (PED) (97/ 100023/EC) 750All Pressure Transmitters :- Sound Engineering Practice 500Hazardous Locations Certifications 250 OperatingEuropean Certifications regionATEX Intrinsic Safety 0 28Certification No. : DNV-2007-OSL-ATEX- 1346X 10 12 15 20 25 30 35 40 II 1 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°C II 2 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°C Supply voltage /V Min. load using HART® - communication 250 Ω R max = Supply voltage - 12 V I max I max = 20.5 mA using HART®-communication I max = 23 mA (when the alarm current 22,5 mA is on) Supply voltage for transmitter with certified intrinsic safety (ATEX) Hart® S PZ 1 Z .5 3 RUN D DN UP 60 Test 1 2Keyboard : Use of selector switch : 3 RUN = Working positionEsc = Press Esc to move back towards the top of the main menu. PZ = Process value zeroEnter = Use the UP arrow key to move up on the current menu level or to increase D = Damping adjustment the selected parameter value. S = Span adjustment = Use the DOWN arrow key to move down on the current menu level or to decrease Z = Zero adjustment DN = Down the selected parameter value. UP = Up = Press Enterto move to a lower level in a menu or to accept a command or parameter value. Housing with display, code N Housing with PLUG connector, code T

Index 52SATRON VV Pressure Transmitter BLV810 01.01.2014 Dimensional drawings (drawings in mm) 125 100 100 100 Clearance for Clearance for Clearance for cover removal cover removal cover removal 60 70 max. 180 max. 210 ∅c b 350 (max) max. 210 Thread ∅d ∅D ∅c b 125 ∅d ∅D Instead of the flange Ø27 threaded sleeve can also be P used. 10 Flange and threaded sleeve E is possible to have also in E VVF type. See the threads in selection chart. In VVF type the place of the flange/ threaded sleeve can be changed by the customer. Ø3560 70 Ø35 Ø35 10 ∅ 63 Type VVF Type VVH max. 180 100Type VVP Clearance for125 cover removal GAP75 Säätötoleranssi 10 AV75 ADJUSTMENT TOLERANCE Flange mounting with adjustment facility, type VVP min. R75 150 340 380 8.2 218 (13.4) (15) ( 0.3) (8.6) Remote electronics, Flange Code ØD Ød Øc b 380 connecting cable with (15) protection hose, code L DN50 PN40 DB 165 125 4x18 20 400 (for transmitter types (15.7) VVP and VVH) DN80 PN40 DC 200 160 8x18 24 P/m E/m Type min. max. min. max. ANSI2\"150lb AC 152 120.6 4x20 23 VVF 1.0 20.0 - - ANSI2\"300lb AD 165 127 8x20 25 VVP - - 1.0 5.5 VVH - - 1.0 5.5 ANSI3\"150lb AE 191 152.4 4x20 26 Dimensions - Equipment cabinet ANSI3\"300lb AF 210 168.3 8x23 31

Index 53 SATRON VV Pressure Transmitter BLV810 Dimensional drawings (dimensions in mm) 01.01.2014 Ø48 Housing with plug-connector, DIN 43650, codes H and T PG9 std. housing types H and T 75 Housing with junction box/terminal Ø48 strip, code M M20 x 1,5 std. housing type M Housing with junction box/terminal strip, with display, code N70 M20 x 1,5 std. housing type N Housing with junction box/terminal strip, with display and plug- connector DIN 43650, code N--- /-P 90 PG9 std. housing type N with plug DIN 43650 Esc Enter

Index 54SATRON VV Pressure Transmitter BLV810 Installation methods 01.01.2014 E E (2)* (1)* *) See the selection table \"Other mounting accessories\" mA mA Hart® S PZ 1 mA -+ -+ Z .5 3 -+ + - Test + - Test RUN D DN UP 60 Test Load 12 Power 3 Wiring 2 Load Housing with terminal strip, code N Power 12 13 Load Power Wiring Wiring Housing with PLUG connector, codes H and T Housing with terminal strip, code M 3 21 Load Power Wiring housing N with plug DIN 43650, code N---/-P

Index 55 SATRON VV Pressure Transmitter BLV810 Selection Chart 01.01.2014Transmitter typesVVF Flexible PTFE hose (PTFE/AISI316 braiding)VVP PVC hose/FlangeVVH AISI316L hose/Flange (Fixed mounting tube)Adjustability Span, min. Span, max. Measuring range 3 1.4kPa (14 mbar) 35 kPa (350 mbar) -35...+35 kPa (-350...350 mbar) 4 4kPa (40 mbar) 100 kPa (1000 mbar) -100...+100 kPa (-1000...1000 mbar) 5 10 kPa (100 mbar) 500 kPa (5000 mbar) -100...+500 kPa (-1000...5000 mbar) Output S 4-20mA DC/HART® -protocol Flange or 0 no flange or thread DB DN50 PN40 DC DN80 PN40 AC ANSI 2\" 150lbs thread AF ANSI 3\" 300lbs GA G1½A AD ANSI 2\" 300 lbs AE ANSI 3\" 150 lbs NA 1½ - NPT NB 2 - NPT GB G2A GC G1A Wetted Flange Diaphragm Extension materials Code Material Code Material (type VVF=PTFE/AISI316) (type VVP=PVC) 2 AISI316L 2 AISI316L /317L (type VVH=AISI316) 3 Hast.C 276 3 Hast.C 276 (*) 5 Tantalum (*) Fill fluid S Silicone oil G Inert oil Housing type H Housing with PLUG-connector, DIN43650, no display, inlet PG9 T Housing with PLUG-connector with manual adjust, DIN43650, no display, inlet PG9, (no ATEX) M Housing with junction box/terminal strip, no display, inlet M20x1,5 N Housing with junction box/terminal strip, with display, inlet M20x1,5 C Transmitter with equipment cabinet (for transmitter type VVF and for special electronics) D Transmitter with equipment cabinet + heating element (for type VVF and for special electronics) Explosion 0 No explosion proof classification 1 Atex Intrinsic Safety, II 1 GD T135°C (**) proof Length P of PTFE/AISI316 hose between sensing element and housing (specify for transmitter type VVF) P10 1.0 m hose P25 2.5 m hose ... P200 20.0 m hose Length E of mounting/protective tube (specify for transmitter type VVP and VVH also with the type VVF if the protective tube is used) E10 1.0 m hose E15 1.5 m hose ... E55 5.5 m hoseOther mounting 0 No mounting accessoriesaccessories 1 Mounting bracket/Clamps/Protective tube 2 Clamps/Protective tubeSpecial size of electrical inletN 1/2 NPT G Pg13.5 P Plug DIN 43650Special featuresSpecial electronics (specify only if housing connected with hose to sensing element)for transmistter types VVP and VVH- connecting cable with protection hoseL Hose protected with PTFE/AISI316 braiding, straightK Hose protected with PTFE/AISI316 braiding, angle of 90oLength of cable between sensing element and housing(specify only if housing connected with cable to sensing element)2 2 m cable 3 3 m cable etc. (max. 10 m)Mounting parts for remote electronics for Ø51 mm tube0 No mounting parts 1 Mounting partsDocumentationCalibration Certificate AE EnglishInstallation and Operating Instructions IE English IF FinnishMaterial Certificates0 No material certificateMC1 Raw materials certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2)standardMC3 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-3.1B (DIN 50049-3.1B) standardWe reserve the right for technical modifications without prior notice. (*) = not for range 3HART® is a registered trademark of HART Communication Foundation.Hastelloy® is the registered trademark of Haynes International. (**) = Housing H and N : II 2 GD T135°CTeflon® is the registered trademark of E.I. du Pont de Nemours & Co.Viton® is the registered trademark of DuPont Dow Elastomers. ATEX transmitters with display are the model without membrane key.

Index 56 BLV811SATRON VVFe Pressure Transmitter M2, revision 3 1.5.2014SATRON VVFe pressure transmitter belongs to V-transmitter family.SATRON VVFe is used for 0 - 4 kPa...0-500 kPa ranges. It is a 2-wiretransmitter with HART® standard communication.SATRON VVFe pressure transmitter is suitable for liquid level measurementsin ground, rock and ships' tanks, drill well and in open channels.SATRON VVFe pressure transmitter can be used to measurecontaminating liquids. Possible foam on the surface of the measured liquiddoes not disturb the measurement.SATRON VVFe does not require compressed air supply.The transmitter's sensor is piezoresistive.TECHNICAL SPECIFICATIONSMeasuring range and span Long-term stability Housing: AISI303/316; Seals: NitrileSee Selection Chart. ±0.1 % of max. span per 12 months and Viton®; Nameplates: PolyesterZero and Span adjustment Temperature effect on compensated Enclosure class: IP66.Zero elevation: Calibrated span is freely temperature ranges -20...+80 °C Zero and span shift, type VVFe 5: Calibrationselectable on the specified range ±0.15 % of max. span For customer-specified range with 1 s.depending from the desired option. damping. (If range is not specified, Zero and span shift, type VVFe 4: transmitter is calibrated for maximumThis can be made by using extern ±0,25 % of max. span range.)control shafts (analog option), keyboard Electrical connections(display option) or HART®275/375 Housing with PLUG connector,communicator. code H: PLUG connector, connector type DINDamping Mounting position effect 43650 model AF; Pg9 gland for cable;Time constant is continuously Zero error <0.15 kPa, which can be wire cross section 0.5 to 1.5 mm2. calibrated out. adjustable 0.01 to 60 s. Housing with junction box/terminal strip, codes M and N:Response time Vibration effect (IEC 68-2-6: FC): M20x1.5, 1/2-NPT inlet; screwMaximum 100 ms ±0.1 % of measuring range/ terminals for 0.5 to 2.5 mm2 wires.Temperature limits 2 g/10 to 2000 Hz Load / ΩProcess: -10 to +80 °C 4 g/10 to 100 HzAmbient: -30 to +80 °C 1400Shipping and storage: -40 to +80 °C. Power supply effect 1250Operating temperature of display: <±0.01 % of calibrated span per volt.0 to +50ºC (does not affect operation of 1000the transmitter). European Directive Information European Pressure Equipment Directive 750Pressure limits (PED) (97/23/EY)Min. and max. process pressure: See the 500appended tables. - Sound Engineering Practice OperatingVolumetric displacement Electro Magnetic Compatibility 250 region< 0.5 mm3 /max. span (EMC directive 2004/108/EC) 0Output 2-wire (2W), 4-20 mA, Insulation test voltage 10 12 15 20 25 30 35 40user selectable for linear, square root, 500 V rms 50 Hz.inverted signal or the transfer function Supply voltage /V(16 points)specified by the user CONSTRUCTION AND Min. load using HART® - communication 250 Ω CALIBRATION R max = Supply voltage - 12 VSupply voltage and permissible load Wetted materialsSee the load capacity diagram; Metal parts: AISI316L (EN 1.4404) I max4-20 mA output: 10-35 VDC. Jacket of cable: PUR I max = 20.5 mA using HART®-communication Other materials: AISI303/316 I max = 23 mA (when the alarm current 22,5 mA is on)Humidity limits 0-100 % RH; freezing Fill fluid Silicone oil or inert oil.of condensed water is not allowed in Supply voltage for transmitterreference pressure channels. Housing with PLUG connector, code without intrinsic safety (not ATEX) HPERFORMANCESPECIFICATIONS Housing: AISI316/303Tested in accordance with IEC 60770: Seals: Viton® and NBRReference conditions, specified span, TEST jacks: MS358Sn/PVDF,no range elevation,AISI316L diaphragm, protected with silicone rubber shield.silicone oil fill. PLUG connector: PA6-GF30 jacket, Silicone rubber seal, AISI316 retaining screw. Housing with junction box/terminal strip, codes M and N:Accuracy Pressure limits Minimum process pressure• ±0.1 % of calibrated span Maximum process pressure, MPa Tproc. Minimum process pressure (span 1:1-7.5:1 /max.range). for different fill fluids (kPa,abs.) On the measuring ranges 7.5:1- 50:1: Max. Pressure Transmitter type overload class °C DC200 Inert oil( )±[0.025+0.010 x max.span ]% of pressure 100 cStcalibrated span calibrated span 20 5 8(incl. nonlinearity, hysteresis andrepeatability) VVFe 4 0.3 PN40 40 8 10 VVFe 5 1.5 PN40 80 16 28 120 21 53 Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 57SATRON VVFe Pressure Transmitter BLV811Weight : 0,9 kg 1.5.2014Transmitter : 1,4 kg- with housing type H : 1,5 kg Load / Ω- with housing type M- with housing type N 1400 1250 1000Product Certifications 750European Directive Information 500Electro Magnetic Compatibility 250 Operating(EMC directive 2004/108/EC)All pressure transmitters regionAtex Directive (94/9/EC) 0 28Satron Instruments Inc. complies with the ATEX 10 12Directive. 15 20 25 30 35 40European Pressure Equipment Directive (PED) (97/ Supply voltage /V23/EC) Min. load using HART® - communication 250 ΩAll Pressure Transmitters :- Sound Engineering Practice R max = Supply voltage - 12 V I max I max = 20.5 mA using HART®-communication I max = 23 mA (when the alarm current 22,5 mA is on) Supply voltage for transmitter with certified intrinsic safety (ATEX)Hazardous Locations CertificationsEuropean CertificationsATEX Intrinsic SafetyCertification No. : DNV-2007-OSL-ATEX- 1346X II 1 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°C II 2 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°CInput Parameters :Ui = 28 VIi = 93 mAPi = 0.651 WCi = 5 nFLi = 0.2 mHSpecial Conditions for Safe Use (X) :The enclosure with plastic window and the plasticDIN43650 connector must not be installed inpotentially explosive atmosphere requiring category1 apparatus.The non-conducting surface of the sensor elementmay be charged by the flow of non-conductingmedia, so there may be electrostatic hazard withIIC-gases. These units should be marked 2 GD.The equipment shall be installed and connectedaccording to the manufacturers instructions.

Index 58SATRON VVFe Pressure Transmitter BLV811 1.5.2014 Dimensions (mm) Ø6 Std. PG9 40 135 Ø22 min. R30 75 70 Ø48 100 P , maximum length 50 m Housing type H, plug connector, DIN43650, no display, inlet PG9 135 Housing type M, junction box/ terminal strip, no display, inlet M20x1.5 Std. M20 x 1,5 170 Housing type N, junction box/ terminal strip, with display, inlet M20x1.5 Std. M20 x 1,5 70

Index 59SATRON VVFe Pressure Transmitter BLV811 Dimensions (mm) 1.5.2014 Housing type N, with plug connector, DIN43650 90 Std. PG9 Esc Enter Screws should not be tightened so much so that the cable inside the ref. pressure hose gets blocked! Satron SI-Toole 13 Ø6 Orded code : M1330001 45 40Connection with Satron SI-Toole 60 26 Mounting part for cable AdjustingInstallation methods Adjusting Instead of theE flange threaded sleeve can(0)* (1)* (2)* also be used.*) See the selection table \"Other mounting accessories\" Flange or threaded sleeve

Index 60SATRON VVFe Pressure Transmitter BLV811 1.5.2014 mA mA mA -+ -+ + - Test Har t® Test + - Test 1 2 -+ 3 2 Load Power 12 13 Load Load Wiring Power Power Wiring Wiring Housing with PLUG connector, code H Housing with terminal strip, code M Housing with display, code N 3 Housing with display, code N 21 Keyboard : Load Power Esc = Press Esc move back towards the top of the main menu. Enter Wiring housing with plug DIN 43650, code N---/ -P = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value. = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value. = Press ENTER to move to a lower level in a menu or to accept a command or parameter value.

Index 61SATRON VVFe Pressure Transmitter BLV811 1.5.2014Selection ChartAdjustability Span, min. Span, max. Measuring range VVFe 4 4kPa (40 mbar) 100 kPa (1000 mbar) -100...+100 kPa (-1000...1000 mbar) VVFe 5 10 kPa (100 mbar) 500 kPa (5000 mbar) -100...+500 kPa (-1000...5000 mbar) Output S 4-20mA DC/HART® -protocol Flange or 0 no flange or thread DB DN50 PN40 DC DN80 PN40 AC ANSI 2\" 150lbs thread AF ANSI 3\" 300lbs GA G1A, male sleeve AD ANSI 2\" 300 lbs AE ANSI 3\" 150 lbs NA 1½ - NPT, male NB 2 - NPT, male GB G1½A, male GC G2A, male Wetted Flange or thread sleeve Diaphragm Extension AISI316 / PUR materials Code Material Code Material 2 AISI316L (EN 1.4404) 2 AISI316L (EN 1.4435) Fill fluid S Silicone oil G Inert oil Housing type H Housing with PLUG-connector, DIN43650, no display, inlet PG9 M Housing with junction box/terminal strip, no display, inlet M20x1,5 N Housing with junction box/terminal strip, with display, inlet M20x1,5 Explosion 0 No explosion proof classification 1 Atex Intrinsic Safety, II 2 GD T135°C proof Length P of PTFE/AISI316 hose between sensing element and housing P10 1.0 m hose P25 2.5 m hose ... P500 50.0 m hose Length E of mounting/protective tube E10 1.0 m hose E15 1.5 m hose ... E55 5.5 m hoseOther mounting 0 No separate fastening partsaccessories 1 Separate fastening part for cable, adjustable 2 Mounting bracket and protective tubeSpecial size of electrical inletN 1/2 NPT G Pg13.5 P Plug DIN 43650DocumentationCalibration Certificate AE EnglishInstallation and Operating Instructions IE English IF FinnishMaterial Certificates0 No material certificateMC1 Raw materials certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2) standardMC3 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-3.1B (DIN 50049-3.1B) standardWe reserve the right for technical modifications without prior notice.HART® is a registered trademark of HART Communication Foundation.Hastelloy® is the registered trademark of Haynes International.Teflon® is the registered trademark of E.I. du Pont de Nemours & Co.Viton® is the registered trademark of DuPont Dow Elastomers.

Index 62 BLV820SATRON VL Pressure Transmitter M2, revision 5 13.02.2017SATRON VL pressure transmitter belongs to the V transmitter family. Theseries V transmitters have both analog and smart properties. SATRON VL Vibration effect (IEC 68-2-6: FC):is used for 0-1.4 kPa...0-15 MPa ranges. It is a 2-wire transmitter with ±0.1 % of span per 2 g to 10-2000 Hz.HART® standard communication. In pressure measuring applicationsSATRON VL transmitters are used for measuring the pressure of clean, Power supply effectsedimenting, crystallizing and sticking materials. The transmitter's sensor is <±0.01 % of calibrated span per volt.piezoresistive. The rangeability is 100:1 for types VL6 - VL7. The versatileselection of diaphragm materials will meet the needs in most processes. Insulation test voltageAlso the models with special accuracy are included to the series of VL 500 V rms 50 Hz.transmitters. CONSTRUCTION AND CALIBRATION TECHNICAL SPECIFICATIONS Materials Measuring range and span PERFORMANCESPECIFICATIONS Diaphragm 1): AISI316L (EN 1.4435), See Selection Chart. Tested in accordance with IEC 60770: AISI304 (EN 1.4301), Duplex (EN Reference conditions, specified span, no 1.4462), Hast. C 276 (EN 2.4819), Zero and Span adjustment range elevation, horizontal mounting; Tantalum or Titanium Gr2 (EN 3.7035). Zero elevation: Calibrated span is freely AISI316L diaphragm, silicone oil fill Other sensing element materials: selectable on the specified range AISI316L, AISI316. depending from the desired option. Accuracy This can be made by using extern ±0.05 % of calibrated span Fill fluid Silicone oil, inert oil or Food oil control shafts (analog option), keyboard (For spans 1:1-5:1). (Neobee M20). (display option), HART®275/375 communicator. For spans 5:1-100:1, Housing with PLUG connector, codes H and T Damping ( )±[0.025+0.01 x max.span ]% of Housing: AISI303/316 Time constant is continuously calibrated span calibrated span Seals: Viton® and NBR adjustable 0.01 to 60 s. TEST jacks: MS358Sn/PVDF, protected Special accurate diaphragm AISI304: with silicone rubber shield. Temperature limits ±1.5 % of calibrated span PLUG connector: PA6-GF30 jacket, Ambient: -30 to +80 °C (For spans 1:1-100:1). Silicone rubber seal, AISI316 retaining Process: -30 to +125 °C / +200 °C screw. Shipping and storage: -40 to +80 °C. (incl. nonlinearity, hysteresis and Operating temperature of display: repeatability) Housing with junction box/terminal 0 to +50ºC (does not affect operation of strip, codes M and N the transmitter) Long-term stability Housing: AISI303/316; Seals: Nitrile • ±0.1 % of max. span / 1 year and Viton®; Nameplates: Polyester Process temperature/°C Temperature effect on -30 °C to Connection cable between sensing 200 +80 °C range, optional element and housing Zero and span error Codes L and K : • ±0.15 % of max. span, code E PTFE hose with AISI316 braiding. • ±0.5 % of max. span, code G Calibration 150 Temperature effect on +20 °C to For customer-specified range with 1 s. +70 °C range, process connections damping. (If range is not specified, Recommended BA and DA transmitter is calibrated for maximum 100 application range Zero and span error range.) • ±0.08 % of max. span, code S (horizontal Enclosure class: IP66. mounting) Temperature effect on 0 to +200 °C, code H 50 • ±1 % of max. span • Process connection PA (VL4 and 5): 20 40 60 80 ±2 % of max. span ambient temperature/°C Mounting position effect Output 2-wire (2W), 4-20 mA, Deviation from horizontal position user selectable for linear, square root, causes a zero shift that can be inverted signal or the transfer function calibrated out. (16 points)specified by the user Supply voltage and permissible load Pressure limits Minimum process pressure: See the load capacity diagram; Pressure capacity Tproc. Min.pressure for different 4-20 mA output: 12-35 VDC. fill fluids (kPa, abs.) Humidity limits Trans- Max. over- Pressure °C DC200 Inert 0-100 % RH; freezing of condensed mitter load pres- class, water is not allowed in reference type sure, MPa max. 100 cSt oil pressure channels. VL3 0.2 PN40 20 5 8 Pressure limits VL4 0.3 PN40 40 8 10 Minimum and maximum process VL5 1.5 PN40 80 10 28 pressure: see the appended tables. VL6 7.5 PN100 VL7 40.0 PN250 120 15 53 160 25 90 200 40 - 1) Parts in contact with process medium. Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

IInnddeexx 63SATRON VL Pressure Transmitter BLV820 13.02.2017Process connections Product Certifications Input Parameters :See Selection Table and dimensional Ui = 28 Vdrawings. European Directive Information Ii = 93 mA Pi = 0.651 WElectrical connections Electro Magnetic Compatibility Ci = 5 nFHousing with PLUG connector, (EMC directive 2004/108/EC) Li = 0.2 mHcodes H and T: PLUG connector, All pressure transmittersconnector type DIN 43650 model AF;Pg9 gland for cable; wire cross-section0.5 to 1.5 mm2.Housing with junction box/terminal strip, Atex Directive (94/9/EC)codes M and N: Satron Instruments Inc. compliesPg13.5, 1/2-NPT inlet; screw terminals with the ATEX Directive. Special Conditions for Safefor 0.5 to 2.5 mm2 wires. Use (X) : The enclosure with plasticWeight Weight / kg European Pressure Equipment window and the plastic Directive (PED) (97/23/EC) DIN43650 connector must notMOUNTING EXTENSION CODE be installed in potentiallyTYPE 0 2 46 All Pressure Transmitters : explosive atmosphere requiring 4.1 4.7 4.9 5.1 - Sound Engineering Practice category 1 apparatus. DN50 6.4 7.6 7.7 8.1 The non-conducting surface of - 3.8 5.0 6.1 Hazardous Locations the sensor element may be Flange DN80 0.9 - - - Certifications charged by the flow of non- 0.6 - - - conducting media, so there may SA (Sandvik) 0,9 European Certifications be electrostatic hazard with IIC- Tx (Tri-Clamp) 1.0 - - - ATEX Intrinsic Safety gases. These units should be PA (PMC 1\") marked 2 GD. BA, VA, WA Certification No. : DNV-2007-OSL- The equipment shall be installed UA, VB, WB ATEX- 1346X and connected according to the manufacturers instructions.Type M : add 0.5 kgand type N : add 0.6 kg to the specifiedweights. II 1 GD T135°C EEx ia II C T4 - 20°C ≤ Tamb ≤ 50°C II 2 GD T135°C EEx ia II C T4 - 20°C ≤ Tamb ≤ 50°C Load / Ω 1400 1250 1000 750 500 250 Operating region 0 28 10 12 15 20 25 30 35 40 Supply voltage /V Min. load using HART® - communication 250 Ω R max = Supply voltage - 12 V I max I max = 20.5 mA using HART®-communication I max = 23 mA (when the alarm current 22,5 mA is on) Supply voltage for transmitter Supply voltage for transmitter without intrinsic safety (not ATEX) with certified intrinsic safety (ATEX)

IInnddeexx 64SATRON VL Pressure Transmitter BLV820 13.02.2017 mA mA S PZ 1 mA -+ -+ Z .5 3 -+ + - Test + - Test RUN D DN UP 60 Test Hart® Load 12 Power 3 Hart® Wiring 2 Load Housing with terminal strip, code N Power 12 13 Load Power Wiring Wiring Housing with PLUG connector, codes H and T Housing with terminal strip, code M 3 Keyboard : 21 Esc = Press Esc move back towards the top of the main menu. Load Enter Power = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value. Wiring housing N with plug DIN 43650, code N-/ P = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value. = Press ENTER to move to a lower level in a menu or to accept a command or parameter value. Housing with display, code N S PZ 1 Z .5 3 RUN D DN UP 60 Test 1 2 3 Use of selector switch : RUN = working position PZ = Process value zero D = Damping adjustment S = Span adjustment Z = Zero adjustment DN = Down UP = Up Housing with PLUG connector, code T

IInnddeexx 65SATRON VL Pressure Transmitter BLV820 Dimensional drawings (dimensions in mm) 13.02.2017 d2 Housing types H, T and M 235 Housing type N 265 [Atex transmitter code 1, +15] Clearance for cover removal 100 Ød4 PG9 std. housing types H and T M20 x 1,5 std. housing types M and N Process connections Ax, Dx and Jx, flanged kb Housing types H, T and M 180 D Housing type N 215 [Atex transmitter code 1, +15] Ø68 -0.1 Ø84 Ø48 -0.15 Ø115 Ø85 Ø115 19 +0.1 4xØ14 -0.3Process connection UA Es- Tuchenhagen DN50/40(Varinent) 23 adjustable ±3 Process connection SA 2 - Sandvik-clamp 43 Process connections DA, DN25 PN40 flange with extension, process temperature max. +125°C FLANGE Flange dimens. Holes Exten. SIZE 0 b D Ød4 Kpl d2 k Ød -0.2 -0.2 ISO DN25 PN40 18 115 68 ISO DN50 PN40 20 165 102 4 14 85 48 ∅d ISO DN80 PN40 24 200 138 4 18 125 51 ISO DN100 PN40 24 235 162 8 18 160 73 E ±0.4 Process connection Ax, Dx and Jx ANSI 1\" 150 lbs 15 108 51 8 22 190 73 - flange with extension ANSI 1\" 300 lbs 18 124 51 4 16 79.4 - ANSI 2\" 150 lbs 23 152 92 4 20 88.9 -Code E +0.4 Es +0.3 ANSI 2\" 300 lbs 25 165 92 -0.4 -0.2 ANSI 3\" 150 lbs 26 191 127 4 20 120.6 51 0 ANSI 3\" 300 lbs 31 210 127 8 20 127 51 2 0- ANSI 4\" 150 lbs 26 229 157 4 20 152.4 73 4 51 54,5 ANSI 4\" 300 lbs 34 254 157 8 23 168.3 73 6 102 105 JIS 10K-50 16 155 96 8 20 190.5 73 152 156 JIS 40K-50 26 165 105 8 23 200 73 JIS 10K-80 18 185 126 4 19 120 51 JIS 40K-80 32 210 140 8 19 130 51 JIS 10K-100 18 210 151 8 19 150 73 JIS 40K-100 36 250 165 8 23 170 73 8 19 175 73 8 25 205 73

IInnddeexx 66SATRON VL Pressure Transmitter BLV820Dimensional drawings (dimensions in mm) 13.02.2017 Housing types H, T and M 165 Housing type N 195 [Atex transmitter code 1, +15] Ø26.2 Process connection PA BA - extension - PMC 1\" code Housing types H, T and M 130 L L Housing type N 160 Hex 46 0 2 28,5 [Atex transmitter code 1, 3 51 +15 and temperature code H, +40] 4 72 102 72 Ø41 -0,025 M45 x 2 ØD Ø41 -0,025 M45x2 A Hex 46 Process connection BA A E Process connection BB - M45x2 with tapered - M45x2 ØD Process connection VA and VB Process connection WA and WB - SMS38 and SMS51 - SMS-SI38 and SMS-SI51 Size Dimensions Thread Dimensions Thread ØD A 38 54 21 Rd 60 x 1/6 Size ØD A E Rd 60 x 1/6 51 64 23 Rd 70 x 1/6 54 21 24 Rd 70 x 1/6 SI38 64 23 27 SI51 20 Housing types H, T and M 215 Optio K Housing type N 245 100 ATEX transmitter +15 125 ØD Clearance for 110cover removal 110 eg. DN80 flange min. 205 min. R75 Process connection TA, TB and TC 60 Optio L - Tri-clamp DN38 ... 63.5 PG9 std. housing types H and T DN ØD M20 x 1,5 std. housing types M and N 38 50,5 Remote electronics, eg. DN80 flange min. 345 51 64 connecting cable with 63,5 77,5 protection hose, codes L and K

IInnddeexx 67 SATRON VL Pressure Transmitter BLV820 Dimensional drawings (dimensions in mm) 13.02.2017 Ø48 Housing with plug-connector, DIN 43650, codes H and T PG9 std. housing types H and T 75 Housing with junction box/terminal Ø48 strip, code M M20 x 1,5 std. housing type M Housing with junction box/terminal strip, with display, code N70 M20 x 1,5 std. housing type N Housing with junction box/terminal strip, with display and plug- connector DIN 43650, code N- / P 90 PG9 std. housing type N with plug DIN 43650 Esc Enter

Index 68SATRON VL Pressure Transmitter BLV820Selection Chart 13.02.2017 Adjustability ( ±) Span, min. Span, max. Measuring range -35...+35 kPa (-350...350 mbar) VL3 1.4kPa (14 mbar) 35 kPa (350 mbar) -100...+100 kPa (-1000...1000 mbar) VL4 4kPa (40 mbar) 100 kPa (1000 mbar) -100...+500 kPa (-1000...5000 mbar) VL5 10 kPa (100 mbar) 500 kPa (5000 mbar) -100...+500 kPa (-1000...5000 mbar), abs. VLA5 10 kPa (100 mbar) 500 kPa (5000 mbar) -0.1...+3 MPa (-1...30 bar) VL6 0,03 MPa (0,3 bar) 3 MPa (30 bar) 0...+3 MPa (0...30 bar), abs. VLA6 0,03 MPa (0,3 bar) 3 MPa (30 bar ) 0...+15 MPa (0...150 bar), abs. VL7 1 MPa (10 bar) 15 MPa (150 bar) Output S 4-20mA DC/HART® -protocol Process connections DA DN25 PN40 ISO 2084-1974 AA ANSI 1\" 150 lbs ANSI B16-5 TC Tri-clamp DN63.5 PN40 ISO 2852 ANSI 1\" 300 lbs ANSI B16-5 UA Tuchenhagen DN50/40 (Varivent) PN40 DB DN50 PN40 ISO 2084-1974 AB ANSI 2\" 150 lbs ANSI B16-5 PA PMC 1\" PN40 ANSI 2\" 300 lbs ANSI B16-5 SA Sandvik DN70 PN64 DC DN80 PN40 ISO 2084-1974 AC ANSI 3\" 150 lbs ANSI B16-5 VA SMS 38 ANSI 3\" 300 lbs ANSI B16-5 VB SMS 51 DD DN100 PN40 ISO 2084-1974 AD ANSI 4\" 150 lbs ANSI B16-5 WA SMS-SI 38 with 24 mm extension ANSI 4\" 300 lbs ANSI B16-5 WB SMS-SI 51 with 27 mm extension JA JIS 10K 50 JIS B 2220 AE Tri-clamp DN38 PN40 ISO 2852 BA M45x2 PN160 Tri-clamp DN51 PN40 ISO 2852 BB M45x2 PN160 with 72mm extension JB JIS 40K 50 JIS B 2220 AF JC JIS 10K 80 JIS B 2220 AG JD JIS 40K 80 JIS B 2220 AH JE JIS 10K 100 JIS B 2220 TA JF JIS 40K 100 JIS B 2220 TB Extension length (mm) (Flanged conn.) (Sandvik-conn.) (not proc. conn. SA) 00 - (only proc. conn. DA, DN25 PN40, max. +125°C) 1 23 - (not proc. conn, BB, DA, PA, Tx, UA, Vx and Wx) 2 51 54.5 (only proc. conn. BA, in the Pasve BA mounting) 3 72 - (not proc. conn, BB, DA, PA, Tx, UA, Vx and Wx) 4 102 105 (not proc. conn, BB, DA, PA, Tx, UA, Vx and Wx) 6 152 156 Wetted materials Diaphragm Extension or other wetted parts Code Material Code Material Code Material 1 Nickel (*) 2 AISI316L 2 AISI316L 5 Tantalum 3 Hast.C 276 3 Hast.C 276 8 Duplex (EN1.4462) 6 Titanium Gr2 (*) 8 Duplex (**) A AISI304 Fill fluid S Silicon oil G Inert oil A Food and beverage special oil (Neobee M20) Housing type H Housing with PLUG-connector, DIN43650, no display, inlet PG9 T Housing with PLUG-connector with manual adjust, DIN43650, no display, inlet PG9, (no ATEX) M Housing with junction box/terminal strip, no display, inlet M20x1,5 N Housing with junction box/terminal strip, with display, inlet M20x1,5 Explosion proof 0 No explosion proof classification 1 Atex Intrinsic Safety, II 1 GD T135°C (***) Temperature effect on -30°C to +80°C range, % per max. span G ±0,5% E ±0,15% Temperature effect on +20°C to +70°C range, % per max. span S ±0.08% (only process connections BA and DA) Temperature effect on 0°C to +200°C range, % per max. span H ±1% (not possible process connections DA1, TA, TB and TC) Process coupling (for types SA, Tx, PA and BA) Material 0 No coupling 2 AISI316L A With coupling 3 Hast.C276 8 Duplex (1.4462) Special size of electrical inlet N 1/2 NPT G Pg13.5 P Plug DIN 43650Special featuresSpecial electronics (specify only if housing connected with hose to sensing element)- connecting cable with protection hoseL Hose protected with PTFE/AISI316 braiding, straightK Hose protected with PTFE/AISI316 braiding, angle of 90ºLength of cable between sensing element and housing(specify only if housing connected with cable to sensing element)2 2 m cable 3 3 m cable etc. (max. 10 m)Mounting parts for remote electronics for Ø51 mm tube0 No mounting parts 1 Mounting partsDocumentationCalibration Certificate AE EnglishInstallation and Operating Instructions IE English IF FinnishMaterial Certificates0 No material certificateMC1 Raw materials certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2) standardMC3 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-3.1B (DIN 50049-3.1B) standard

IInnddeexx 69 SATRON VL Pressure Transmitter BLV820 13.02.2017SMS-SI couplings : L2 Coupling M45x2 with adjust, for process connection BA, L1 order code M1050459 28,5for pipe Ødfor vessel ØD Size Dimensions M45x2ØD Thread 38 L1 Ød L2 Ø6060 Rd 60 x 1/6 51 27 38,5 24 Ø6070 Rd 70 x 1/6 30 51 25Pasve BA working position: Coupling BB M45x2, for process connection BB, order code M1050474 (Welding assistant, code M1050473)For process connections BA3 and BB1. Transmitter in measuring 572. Transmitter can be checked, changed, calibrated or the transmitter diaphragm can be flushed 1. 2. (*) = only with flange (**) = not for range 3 with process connection code PA (***) = Housing H and N : II 2 GD T135°C ATEX transmitters with display are the model without membrane key. Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.comWe reserve the right for technical modifications without prior notice.HART® is a registered trademark of HART Communication Foundation.Viton® is the registered trademark of DuPont Down Elastomers.Hastelloy® is the registered trademark of Haynes International.Teflon® is the registered trademark of E.I. du Pont de Nemours & Co

Index 70 BLVT830SATRON VDtL Differential Pressure Transmitter M3, revision 5 11.01.16SATRON VDtL differential pressure transmitter belongs to V-transmitterfamily. The series V transmitters have both analog and smart properties.SATRON VDtL is used for 1.4 kPa...3 MPa ranges. It is a 2-wiretransmitter with HART® standard communication. In pressure measuringapplications SATRON VDtL transmitters are used for liquid level, pipelinepressure and density measurements. SATRON VDtL transmitter isequipped with an SOS (Silicon On Sapphire) sensing element. Therangeability is 25:1.TECHNICAL SPECIFICATIONSMeasuring range and span Humidity limits Duplex or Hast. C276.See Selection Chart. 0-100 % RH; freezing of condensed O-ring on sensing element: PTFE. water not allowed in reference Other sensing element materials:Zero and Span adjustment pressure channels. AISI316, SIS 2343, SIS 2324.Zero elevation: Calibrated span is freely Mounting bolts and nuts for sensorselectable on the specified range PERFORMANCESPECIFICATIONS flanges: AISI316 (PN420: m.8.8.Zne)depending from the desired option. Tested in accordance with IEC 60770:This can be made by using extern Reference conditions, specified span, Fill fluidcontrol shafts (analog option), keyboard no range elevation, horizontal Silicone oil (DC200, 10 cSt) or inert oil(display option), HART®275/375 mounting; AISI316L diaphragm, silicone or food industry oil (Neobee M-20).communicator. oil fill. Housing with PLUG connector, codesDamping Accuracy H and TTime constant is continuously ±0.05 % of calibrated span Housing: AISI316 Seals: Viton® and NBR adjustable 0,01 to 60 s. (span 1:1-5:1 /max.range). TEST jacks: MS358Sn/PVDF, protected On the measuring ranges 5:1-25:1: with silicone rubber shield.Temperature limits PLUG connector: PA6-GF30 jacket,Process temperature: ( )±[0.01+0.012 x max.span ]% of Silicone rubber seal, AISI316 retainingrange 3: +10 to +80 °C screw.ranges 4, 5 and 6: -30 to +120 °C calibrated span calibrated spanAmbient temperature: -30 to +80 °C Housing with junction box/terminalShipping and storage: -30 to +80 °C. Special accurate diaphragm AISI304: strip, M and NOperating temperature of display: 0 to ±1.5 % of calibrated span. Housing: AISI303/316+50ºC (does not affect operation of the (For spans 1:1 - 25:1) Seals: Nitrile and Viton®transmitter) Nameplates: Polyester (incl. nonlinearity, hysteresis and repeatability) Connection hose between sensing element and housingPressure limits Long-term stability (codes L and K):Withstands 40 bar static pressure and PTFE hose with AISI316 braiding.unequal pressure load without damage ±0.1 %/max. span for 12 months Calibration For customer-specified range with 1s.to the transmitter. Pressure class: see damping. (If range is not specified, transmitter is calibrated for maximumProcess Connections. See the following Temperature effect on compensated range.)table for minimum pressure limits. temperature range Enclosure class: IP66. Minimum process pressure: Ambient: Zero and span shift: ±0.5 % of Process connections max. span. S1) ePeaSrtesleincctioonntTaacbt wleith process medium. Tproc Min. pressure for different Process: Zero error: ±0.5 % of Load / Ω fill fluids (kPa, abs.) max.span (ranges 4,5 and 6), ±1 mbar per 10 K or min. ±0.5 % of 1400 °C max.span (range 3) 1250 DC200 Inert 1000 10 cSt oil 750 20 5.0 8.0 Static pressure effect on Zero 60 12.0 18.5 • ±0.5 % of max.span per 4 MPa 500 80 16.0 28.0 120 21.0 53.0 Mounting position effect Operating Deviation from horizontal position 250 regionVolume of negative-side process causes a zero shift that can bechamber: 2.5 cm3. calibrated out. 0 10 12 15 20 25 30 35 40Process chamber’s volumetric Power supply effectdisplacement for maximum span: < ±0.01 % of calibrated span per volt. Supply voltage /V< 0.1 cm3 Min. load using HART® - communication 250 Ω Insulation test voltageOutput 2-wire (2W), 4-20 mA, 500 V rms 50 Hz R max = Supply voltage - 12 Vuser selectable for linear, square root, I maxinverted signal or the transfer function (16 CONSTRUCTION AND CALIBRATIONpoints)specified by the user Materials I max = 20.5 mA using HART®-communication Diaphragms 1): AISI316L (EN 1.4435),Supply voltage and permissible load AISI304 (EN 1.4301), Duplex (EN I max = 23 mA (when the alarm current 22,5 mA is on)See the load capacity diagram; 1.4462), Hast. C276 (EN 2.4819),4-20 mA output: 12-35 VDC. Nickel, Titanium Gr2 (EN 3.7035) or Tantalum. Flanges 1) and vent valves 1): AISI316, Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 71SATRON VDtL Differential Pressure Transmitter BLVT830 11.01.2016Electrical connections Load / ΩHousing with PLUG connector, H and T :PLUG connector, connector type DIN 43650 model AF; Pg9 1400gland for cable; wire cross-section 0.5 to 1.5 mm2. 1250Housing with junction box/terminal strip, M and N: 1000Inlet M20x1.5, 1/2-NPT; screw terminals for 0.5 to 2.5 mm2wiresProduct Certifications 750European Directive Information 500Electro Magnetic Compatibility 250 Operating(EMC directive 2004/108/EC) regionAll differential pressure transmitters 0 15 10 12 28Atex Directive (94/9/EC)Satron Instruments Inc. complies with the ATEX 20 25 30 35 40Directive. Supply voltage /VEuropean Pressure Equipment Directive (PED) (97/23/EC) Min. load using HART® - communication 250 ΩAll Differential Pressure Transmitters : R max = Supply voltage - 12 V- Sound Engineering Practice I maxHazardous Locations Certifications I max = 20.5 mA using HART®-communicationEuropean Certifications I max = 23 mA (when the alarm current 22,5 mA is on)ATEX Intrinsic Safety Supply voltage for transmitterCertification No. : DNV-2007-OSL-ATEX- 1346X with certified intrinsic safety (ATEX)II 1 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°CII 2 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°CInput Parameters : Weight (kg):Ui = 28 V See the table; add 0,6 kg for transmitter with screwed capIi = 93 mA housing and 0,7 kg for housing with display.Pi = 0.651 WCi = 5 nFLi = 0.2 mHSpecial Conditions for Safe Use (X) :The enclosure with plastic window and the plasticDIN43650 connector must not be installed in potentiallyexplosive atmosphere requiring category 1 apparatus.The non-conducting surface of the sensor element maybe charged by the flow of non-conducting media, sothere may be electrosatic hazard with IIC-gases. Theseunits should be marked 2 GD.The equipment shall be installed and connectedaccording to the manufacturers instructions. Type Extension code 6 0 24 10.4 Ax, Dx, JX* 9.2 9.6 10 8.1 SA* 7.2 7.7 * process connection code

Index 72SATRON VDtL Differential Pressure Transmitter BLVT830 11.01.2016 Dimensions (in mm) d2 Housing types H, T and M 188 Housing types N 218 54±0,2 M10 / deep 14 / PN100 d2 96 k 175 D Pg9 std. Housing types H and T Ø18.5 +0.3 Process connection >100 0 types Ax, Dx and Jx >290 125 1/4-18 NPSF +0.5 2.5 0 Notice! 14.5 The flange dimensions on the last page! A-A Housing types H, T and M 215 AA 100 Housing type N 245 125 110 min. R75 Optio L 60 Pg9 std. Housing types H and T M20x1,5 std. Housing type N Optio K

Index 73SATRON VDtL Differential Pressure Transmitter BLVT830 11.01.2016Dimensions (mm) Notice! d2 The flange dimensions on the last page! 20 0 -0.2 ∅d ØD E ±0.4 Process connection types TA , k TB and TC D - Tri-clamp DN38 ... 63,5 Process connection types Ax, Dx and Jx, with extension DN ØD 38 50,5 51 64 63,5 77,5 Extension code 6 0 24 Dim. E 0 51 102 152 A Ø115 ØD Es +0.1 Process connection types VA and VB -0.3 - SMS38 and SMS51 Process connection type SA Dimensions ØD A Extension code Size 54 21 Thread 64 23 24 6 38 Rd 60 x 1/6 51 Rd 70 x 1/6 Dim. Es 54.5 105 156 Hex 46 72 Hex 46 72 Ø41 -0,025 M45 x 2 Ø41 -0,025 M45x2 Process connection BA Process connection BB - M45x2 - M45x2 with tapered

Index 74SATRON VDtL Differential Pressure Transmitter BLVT830 11.01.2016 Dimensional drawings (dimensions in mm) Ø48 Housing with plug-connector, DIN 43650, codes H and T PG9 std. housing types H and T 75 Housing with junction box/terminal Ø48 strip, code M M20 x 1,5 std. housing type M Housing with junction box/terminal strip, with display, code N 70 M20 x 1,5 std. housing type N Housing with junction box/terminal strip, with display and plug- connector DIN 43650, code N- / P 90 PG9 std. housing type N with plug DIN 43650 Esc Enter

Index 75SATRON VDtL Differential Pressure Transmitter BLVT830 11.01.2016 mA mA S PZ 1 mA -+ -+ Z .5 3 -+ + - Test + - Test RUN D DN UP 60 Test Hart® 12 3 Hart® 2 Load Load Power 12 13 Load Power PowerWiring Wiring WiringHousing with PLUG connector, codes H and T Housing with terminal strip, code M Housing with terminal strip, code N 3 Keyboard : 21 Esc = Press Esc move back towards the top of the main menu. Load Enter Power = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value.Wiring housing with plug DIN 43650, code N-/ P = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value. = Press ENTER to move to a lower level in a menu or to accept a command or parameter value. Housing with display, code N S PZ 1 Z .5 3 RUN D DN UP 60 Test 1 2 3Use of selector switch :RUN = working positionPZ = Process value zeroD = Damping adjustmentS = Span adjustmentZ = Zero adjustmentDN = DownUP = UpHousing with PLUG connector, code T

Index 76SATRON VDtL Differential Pressure Transmitter BLVT830 Selection Chart 11.01.2016 VDtL Differential Pressure Transmitter Measuring range -35...+35 kPa (-350...+350 mbar) Adjustability ( ± ) Span, min. Span, max. -100...+100 kPa (-1000...+1000 mbar) 3 1,4 kPa (14 mbar) 35 kPa (350 mbar) -500...+500 kPa (-5000...+5000 mbar) 4 4 kPa (40 mbar) 100 kPa (1000 mbar) -3...+3 MPa (-30...+30 bar) 5 26,5 kPa (265 mbar) 500 kPa (5000 mbar) 6 145 kPa (1,45 bar) 3 MPa (30 bar) Output S 4-20mA DC/HART® -protocol Process connections JE JIS 10K 100 JIS B 2220 TA Tri-clamp DN38 PN40 ISO 2852 JF JIS 40K 100 JIS B 2220 TB Tri-clamp DN51 PN40 ISO 2852 DB DN50 PN40 ISO 2084-1974 AC ANSI 2\" 150 lbs ANSI B16-5 TC Tri-clamp DN63.5 PN40 ISO 2852 DC DN80 PN40 ISO 2084-1974 AD ANSI 2\" 300 lbs ANSI B16-5 SA Sandvik DN70 PN64 DD DN100 PN40 ISO 2084-1974 AE ANSI 3\" 150 lbs ANSI B16-5 VA SMS 38 JA JIS 10K 50 JIS B 2220 AF ANSI 3\" 300 lbs ANSI B16-5 VB SMS 51 JB JIS 40K 50 JIS B 2220 AG ANSI 4\" 150 lbs ANSI B16-5 BA M45x2 PN160 JC JIS 10K 80 JIS B 2220 AH ANSI 4\" 300 lbs ANSI B16-5 BB M45x2 PN160 with tapered JD JIS 40K 80 JIS B 2220 Process connection SA Extension length/mm Process connections DC, AE and AF - 0 0 54.5 2 51 105 4 102 156 6 152 Wetted materials (-)-flange (+)diaphragm (-)-diaphragm Extension (-)diaphragm coating Code Material Code Material Code Material Code Material Code Material 9 gold/Rhodium 2 AISI316L 1 Nickel (*) 2 AISI316L/317L 2 AISI316L (Do not enter code if diaphragm 3 Hast.C 276 2 AISI316L 3 Hast.C 276 3 Hast.C 276 not coated) 3 Hast. C276 5 Tantalum 8 Duplex 5 Tantalum 8 Duplex 6 Titanium Gr2 (*) 8 Duplex (EN 1.4462) A AISI304 Fill fluid S Silicone oil A Oil for food Industry (Neobee M-20) G Inert oil (-)-side process D M10, PN100, ranges 3 to 6, IEC 61518. connection U 7/16-20 UNF, PN100, ranges 3, 4, and 5 only. F Screwed flange adapters, PN100, IEC 61518. V Connection through hydraulic seal (not recommended for ranges 3 and 4). Housing type H Housing with PLUG-connector, DIN43650, no display, inlet PG9 T Housing with PLUG-connect.with manual adjust, DIN43650, no display, inlet PG9, no ATEX M Housing with junction box/terminal strip, no display, inlet M20x1,5 N Housing with junction box/terminal strip, with display, inlet M20x1,5 Explosion proof 0 No explosion proof 1 Atex Intrinsic Safety, II 1 GD T135°C (**) Process coupling Material 0 No coupling 2 AISI316L (EN 1.4404) A With coupling 3 Hast.C276 (EN 2.4819) 8 Duplex (EN 1.4462) Process thread on flange adapter Thread type Thread size Code Type Code Size (only specify for R straight R thread 2 1/4 (-)-side N NPS thread 3 3/8 process conn. F) P taper R thread 4 1/2 T NPT thread Special size of electrical inlet N 1/2 NPT G Pg13.5 P Plug DIN 43650 Special features Special electronics (specify only if housing connected with hose to sensing element) - connecting cable with protection hose L Hose protected with PTFE/AISI316 braiding, straight K Hose protected with PTFE/AISI316 braiding, angle of 90º Length of cable between sensing element and housing (specify only if housing connected with cable to sensing element) 2 2 m cable 3 3 m cable etc. (max. 10 m) Mounting parts for remote electronics for Ø51 mm tube 0 No mounting parts 1 Mounting parts Documentation Calibration Certificate AE English IF Finnish Installation and Operating Instructions IE English Material Certificates 0 No material certificate MC1 Raw materials certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standard MC2 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2) standard MC3 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-3.1B (DIN 50049-3.1B) standard (*) = only with flange (**) = Housing H and N : II 2 GD T135°C

Index 77SATRON VDtL Differential Pressure Transmitter BLVT830 11.01.2016 Flange Flange dimensions Holes Extension size b D Ød4 pcs d2 k Ød -0.2ISO DN50 PN40 20 165 102 4 18 125ISO DN80 PN40 24 200 138 8 18 160 51ISO DN100 PN40 24 235 162 8 22 190 73ANSI 2\" 150 lbs 23 152 92 4 20 120.6 73ANSI 2\" 300 lbs 25 165 92 8 20 127 51ANSI 3\" 150 lbs 26 191 127 4 20 152.4 51ANSI 3\" 300 lbs 31 210 127 8 23 168.3 73ANSI 4\" 150 lbs 26 229 157 8 20 190.5 73ANSI 4\" 300 lbs 34 254 157 8 23 200 73JIS 10K-50 16 155 96 4 19 120 73JIS 40K-50 26 165 105 8 19 130 51JIS 10K-80 18 185 126 8 19 150 51JIS 40K-80 32 210 140 8 23 170 73JIS 10K-100 18 210 151 8 19 175 73JIS 40K-100 36 250 165 8 25 205 73 73Process connection types Ax, Dx and Jx Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.comWe reserve the right for technical modifications without prior notice. (**) = ATEX transmitters with display are theHART® is a registered trademark of HART Communication Foundation. model without membrane key.Viton® is the registered trademark of DuPont Down Elastomers.Hastelloy® is the registered trademark of Haynes International.Teflon® is the registered trademark of E.I. du Pont de Nemours & Co

Index 78 !! \"#$% )* * !! + , !\" %&' ($%% *- . . ** ! $! # - % ! &'() '( ( ) %& % ! &'+) % !\"#$ ! & -) !\"#$ * , . / 01)* * + * $ , +* * )* * *, , -.* -* $ *+ -/ %( !\"# ! !\" # $%$ \" & !\" # $%$ \" '''

Index 79

Index 80SATRON PASVE Mounting & Service Valve G340 Selection table 01.10.2015 PASVE Body G Standard model (with 3 seals) N Flushing (with 2 seals) Mounting Wetted parts (C and P) Code Material AISI316L (std.) C On container 2 Hastelloy C P On pipe 3 4 AISI904L F On flange 6 Titanium 8 Duplex Flanges Wetted parts Code Type Code Material T DN50 PN40 2 AISI316L (only manual) 3 Hastelloy® C276 D DN80 PN40 4 AISI904LPASVE® is a ball-type mounting & J DN100 PN10/16 6 Titaniumservice valve for SATRON VG and HG C DN100 PN40type level and pressure transmitters. 8 Duplex (EN 1.4462)PASVE® makes it simple to discon- K ANSI 2½\"/150lbsnect the transmitter from the process (only manual) P1 PVDF PN10for maintenance and cleaning, withoutstopping the process or draining the A ANSI 3\"/150 lbs (P1 only for flange codes D,A,E)tank.PASVE® is available in a manually B ANSI 3\"/300 lbsoperated type or equipped with apneumatic actuator. H ANSI 4\"150 lbsTECHNICAL SPECIFICATIONS G ANSI 4\"/300 lbsTransmitter connection SealsG1 female, seat accepts SATRON VG-transmitters. 0 PTFE + 20C + 5Gr (std.)Max. operating pressure/temperature 1 PTFE 100%Pressure 40 bar, temperature 250 °C, 4 PTFE + 20C + 5Gr / AISI316 / PTFE 50 % (Hard)(see the appended table). 5 PTFE 100% / AISI316 / PTFE 50% (Hard)Min. operating temp. -50 °C. 6 PTFE 100% / PVDF 100% (Hard)PVDF: See the appended table. Pt100 temperature sensor (Only with body code N)Materials 0 No sensorWetted parts: AISI316L, AISI904L,Duplex, X With sensor (measuring range: -50...+200 °C)Hastelloy C276, Titanium, for F type alsoPVDF. Seals PTFE or PTFE with carbon Actuatorand graphite filling. MD No actuator (manually operated) AE1 Electric actuator 230 VWeight Electric actuator 115 VPASVE GC 4.3 kg, PASVE GP 4.2 kg, AD_ Double-action actuator AE3PASVE GF 8.4 kg, Actuator 5.5 kg AS_ Spring-return actuatorPressure/Temperature curvebar PN40/ANSI300lbs Solenoid valve type (for codes AD and AS only) 40 0 _ No solenoid valve 4 _ 28 V DC 0.4 W (only EEx ia) 1 _ 230 V AC 50 Hz 2 W (std.) 2 _ 24 V DC 2.5 W (also EEx dm) 3 _ 115 V AC 60 Hz 2 W Solenoid explosion proof 3 EEx dm IIC T5/T6 0 No explosion proof 1 EEx m II T4 2 EEx ia IIC T6 Position switches A Position switch EEx ib IIC T5/T6 E Position switch NAMUR, DIN 19234 0 None X Equipped with position switches Options Z4 Cutting ball Z1 For oxygen use Z5 Diamond-coated ball Z2 Process side flushing IF Finnish Documentation IE English Material certificates MC2 SFS-EN 10204-2.2 (DIN50049-2.2) MC3 SFS-EN 10204-3.1B (DIN50049-3.1B) 0 No material certificate MC1 SFS-EN 10204-2.1 (DIN50049-2.1) Specification example: PASVE G FD2 0 0 AD10 X IE MC1 30 20 ANSI150lbs ¼ - NPSF 10 M6 ¼ - NPSF PVDF PN10 -50 0 50 100 150 200 250°C Body G Body N Satron Instruments Inc., P.O.Box 22, FIN-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 81SATRON PASVE Mounting & Service Valve G340 01.10.2015Dimensions (mm) Manually operated PASVE GF-(a) PASVE GC PASVE GP NF-(a) NC NP Flange type Welded on container Welded on pipe 55 41 66 L LL R262 Ø127 R262 R262 ØD Ø115 6.5 Ø70 A GF-(a) ØD Ød A With pneumatic actuator FLANGE 172 139.7 22 PASVE GF-(a) PASVE GC PASVE GPCode Type 191 152.4 22 NP 210 168.3 27 NF-(a) NC K ANSI 2½\" 150 lbs 229 190.5 26 66 A ANSI 3\" 150 lbs 254 200 29 L 55 ØD B ANSI 3\" 300 lbs 165 125 20 Ød H ANSI 4\" 150 lbs 200 160 22 A G ANSI 4\" 300 lbs 220 180 22 41 T DN50 PN40 235 190 26 D DN80 PN40 185 150 20 J DN100 PN10/16 210 170 30 C DN100 PN40 E JIS10K 80 F JIS40K 80 300 225 Ø127 Ø115 6.5 Ø70 260 (type AD) 390 (type AS)OPERATING POSITIONS Surface temperature Measuring Replacement Cleaning and Ambient temperature Temperature position and zero checking, °C class setting only manual 70 model 85 T6 120 T5 T4 European Directive Information ATEX directive (94/9/EC) Satron Instruments Inc. complies with the ATEX directive.We reserve the right for technical modifications without prior notice. European Pressure Equipment Directive (PED) (97/23/EC) - Sound Engineering PracticeTeflon® is the registered trademark Hastelloy® is the registered trademarkof E.I. du Pont de Nemours & Co of Haynes International. European CertificationPasve® is the registered trademark of Satron Instruments Inc. II 3 GD

Index 82SATRON PASVE BA Mounting & Service Valve G360 Selection table 15.11.2012 PASVE BA Mounting Wetted parts (C and P) Code Material C On container 2 AISI316L(EN 1.4404) (std.) P On pipe 3 Hastelloy C (EN 2.4819) 4 AISI904L (EN 1.4539) 6 Titanium Ti-2 (EN 3.7035) 8 Duplex (EN 1.4462) K 254 SMO®PASVE® BA is a ball-type mounting F Flange Wetted parts& service valve for SATRON VL- and Code MaterialVDtL - pressure and differential Flanges 2 AISI316Lpressure transmitters and also for 3 Hastelloy® C276Satron HPS hydraulic pressure seals. Code Type 4 AISI904LPASVE® BA makes it simple to D DN80 PN40 6 Titaniumdisconnect the transmitter from the J DN100 PN10/16 8 Duplex (EN 1.4462)process for checking, changing the C DN100 PN40 K 254 SMO®transmitter, flushing and calibration A ANSI 3\"/150 lbswithout stopping the process. B ANSI 3\"/300 lbsPASVE® BA is available in a H ANSI 4\"150 lbsmanually operated type or equipped G ANSI 4\"/300 lbswith a pneumatic actuator. SealsTECHNICAL SPECIFICATIONS 0 PTFE + 20C + 5Gr (std.)Transmitter connectionM45x2 female thread, suitable for 1 PTFE 100%SATRON VL- and VDtL-transmitters and 4 PTFE + 20C + 5Gr / AISI316 / PTFE 50 % (Hard)for Satron HPS hydraulic pressure seals. 5 PTFE 100% / AISI316 / PTFE 50% (Hard) 6 PTFE 100% / PVDF 100% (Hard)Max. operating pressure/temperaturePressure 40 bar, temperature 250 °C, Pt100 Temperature transmitter(see the appended table). 0 No sensorMin. operating temp. -50 °C. X With sensor (-50...+200 °C) Pressure/Temperature curve Actuator bar MD No actuator (manually operated) AE1 Electric actuator 230 V P N 4 0 /AN S I3 0 0l b s AD_ Double-action actuator AE3 Electric actuator 115 V 40 AS_ Spring-return actuator A0 No actuator, fittings to the 30 actuator 20 ANSI150lbs Solenoid valve type (for codes AD and AS only) 10 0 _ No solenoid valve 4 _ 28 V DC 0.4 W (only EEx ia) 1 _ 230 V AC 50 Hz 2 W (std.) 2 _ 24 V DC 2.5 W (also EEx dm) 3 _ 115 V AC 60 Hz 2 W Solenoid explosion proof 0 No explosion proof 3 EEx dm IIC T5/T6 1 EEx m II T4 2 EEx ia IIC T6 Position switches 0 None A Position switch EEx ib IIC T5/T6 X Equipped with position switches E Position switch NAMUR, DIN 19234 Options Z4 Cutting ball Z1 Oxygen wash Z5 Diamond-coated ball Z2 Process side flushing Dokumentit IF Finnish IE English Material certificates MC2 SFS-EN 10204-2.2 (DIN50049-2.2) 0 No material certificate MC3 SFS-EN 10204-3.1B (DIN50049-3.1B) MC1 SFS-EN 10204-2.1 (DIN50049-2.1) Specification example: PASVE BA FD200AD10XIEMC1 -50 0 50 100 150 200 250°C WORKING POSITIONS 1. 2.Materials 1. Transmitter inWetted parts : AISI316L, AISI904L, Duplex, measuringHastelloy C276, Titanium, 254 SMO.Seals: PTFE, PTFE with carbon and 2. Transmitter can begraphite filling or PTFE 50%+AISI316 50% checked, changed,mixture calibrated or theWeight transmitter diaphragmPASVE BA C 4,3 kg, PASVE BA P 4,2 kg, can be flushedPASVE BA F 8,4 kg, Actuator 5,5 kg Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. + 358 207 464 800, Telefax +358 207 464 801 www.satron.com

Index 83

Index 84

Index 85

IInnddeexx 86 G345 SATRON PASVE pH Mounting & Service Valve 01.11.2016 OPERATING POSITIONS 1/4-NPSF 1/4-NPSFPASVE® pH is a mounting/service Measuring positionvalve for pH sensors. It can be used Sensor in measurement position.with practically all pH sensors in this (Flushing channel can be used forsize category in the most demanding watercooling the sensor and valve)measurement locations.PASVE® pH allows the cleaning and Cleaningcalibration of pH sensors without solutionstopping the process. When required,this can be done automatically. To Service and calibration positionprotect the sensor in abrasive Sensor is turned inside the valve for cleaning,processes, it can be turned to the calibrating or sensor change without stoppingmeasuring position only for the the process.duration of the actual measurement.PASVE® pH is available in a manuallyoperated type or equipped with apneumatic or electric actuator.TECHNICAL SPECIFICATIONSCompatible pH sensorsRefer to the Selection Table.Max. operating pressure/temperature40 bar, 250 °C, (see the below table).Min. operating temp. -50°C.Sensor-specific limitations should betaken into account by the application.Pressure/Temperature curvebar PN40/ANSI300lbs 403020 ANSI150lbs10 PVDF PN10 -50 0 50 100 150 200 250°C Pasve pH manual operation Pasve pH automatic operation with actuator PVDF curve is valid in water and other clean liquids Sensor cleaning can be automated to prolong the sensor life. Pneumatic and electrical actuatorsMaterials are available for wide application range.Wetted parts: AISI316L, AISI904L,Titanium, Hastelloy® C276, Duplex, Hastelloy is the registered trademark254 SMO® and PVDF. of Haynes International.Seals: PTFE, PTFE with carbon andgraphite filling or PTFE 50%+AISI316 We reserve the right for technical modifications 254 SMO is the registered trademark50% mixture without prior notice. of Outokumpu Stainless Inc.Weight Pasve is the registered trademarkPASVE pHC 4.7 kg, PASVE pHP 4.8 kg, of Satron Instruments Inc.PASVE pHF 8.9 kg,Actuator 5.5 kg Satron Instruments Inc., P.O.Box 22, FIN-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

IInnddeexx 87SATRON PASVE pH Mounting & Service Valve G345 PASVE pHF Pasve pH with pneumatic actuator 01.11.2016 (Flange type) PASVE pHC PASVE pHP L 55 (Welded on a (Shape the body for A container or a the pipe Ø before ØD horizontal pipe, welding, instructions Ød instructions on on manual page 11) manual page 10) 66 41306 250 Ø127 Ø115 6.5 Ø70 PASVE pHF 270 ØD Ød A 400 (type AS) FLANGE Code Type 172 139.7 22PASVE pHB 191 152.4 22(Welded on a container or a K ANSI 2½\" 150 lbs 210 168.3 27vertical pipe, body 15º) A ANSI 3\" 150 lbs 229 190.5 26 B ANSI 3\" 300 lbs 254 200 29 L H ANSI 4\" 150 lbs 165 125 20 31 G ANSI 4\" 300 lbs 200 160 22 T DN50 PN40 220 180 22 D DN80 PN40 235 190 26 J DN100 PN10/16 185 150 20 C DN100 PN40 210 170 30 E JIS10K 80 F JIS40K 80 PASVE pHT PASVE pHD (Flow-through body, (Flow through body, threaded connection) flange connection) 306 250 Ø115 BL W306 250 Ø140 M10/15L depends on the sensor type 400 (type AS) 230 270 54 300 H K ØDPASVE pHD W ØD H PASVE pHT BH 55 108 48 FLANGE 55 124 48 THREAD 77 48 Code Type 68 153 76 Code Type (dim.K) 92 64 68 165 76 104 76 H ANSI 1\" 150 lbs 55 115 48 2 1\" - NPT J ANSI 1\" 300 lbs 68 165 76 4 1.5\" - NPT U ANSI 2\" 150 lbs 5 2\" - NPT V ANSI 2\" 300 lbs G DN25 PN40 T DN50 PN40Dimensions (mm)

IInnddeexx 88SATRON PASVE pH Mounting & Service Valve G345 01.11.2016Sensor connectionStandard sensor connection PG13.5 / Ø12 mm / length 120 mmCode dimension RS R < 30 mmM R < 20 mm R Ref.L R < 10 mm Check the sensor datasheet for the reference point location!Special sensor connection typesCode SensorB1 Broadley-James Dynaprobe IIB2 Broadley-James S410B3 Broadley-James DynaProbe ST856C1 Honeywell Durafet II, smooth tipC2 Honeywell Meredian II and Durafet II guarded tipD1 Barben 546/556, flat glass, 38 mm insertion depthD4 Barben 551/561, flat glass, actual insertion depth 3.94\"D6 in-line Barben 551/561, flat glass, 100 mm insertion depth (manual only)E3 E+H CPF81/82, guarded tip, not machinedE4 E+H CPF81, flat glass, not machinedF1 Foxboro 871AF2 Foxboro 871pHF3 Foxboro PH10-3F4 Foxboro PH10-2F5 in-line Foxboro PH10-2 (manual only)G1 Lange (GLI) PD1P1.99G2 Lange (GLI) DPD1P1.99GX +GF+ 272X, flat glassH1 Hamilton Inchtrode N75PH2 Hamilton Inchtrode N75FI1 Teledyne Isco 701pHK1 Kemotron 4835 and 4837 UPWO2 Orbisphere (31110)P1 Polymetron 8350/51R1 Rosemount/Emerson 389R2 Rosemount/Emerson 385+R4 Rosemount/Emerson TUpH 396/396VP, 398/398VPR5 in-line Rosemount/Emerson TUpH Combination 396P/PVP (manual only)R6 Rosemount/Emerson TUpH Combination 396P/PVPR9 Rosemount/Emerson 3300HT/HTVPRA Rosemount/Emerson 3500VPRB Rosemount/Emerson RB-546RC Rosemount/Emerson 3900/ 3900VPT1 ABB TB556, flat glass, 38 mm insertion depthT2 ABB TB557, flat glassT3 ABB TB564, flat glassT4 ABB TB561 / Barben 551/561, flat glass, 100 mm insertion depthT5 in-line ABB TB564 (manual only), flat glassT6 in-line ABB TB561 (manual only), flat glass, 100 mm insertion depthT7 ABB TB556, flat glass, 28 mm insertion depthY1 Yokogawa FU20 - - NPT (guarded tip)Y2 Yokogawa FU20 - - FSM (flat glass)Surface temperature European Directive Information Ambient temperature Temperature class ATEX directive (94/9/EC) °C Satron Instruments Inc. complies with the ATEX directive. 70 T6 85 T5 European Pressure Equipment Directive (PED) (97/23/EC) 120 T4 - Sound Engineering Practice European Certification: II 3 GD

IInnddeexx 89SATRON PASVE pH Mounting & Service Valve G345 01.11.2016Selection TablePASVE pH Wetted parts (C, B and P)Mounting type Code MaterialC Welded on a container or a horizontal pipe (*) 2 AISI316L (EN 1.4404), std.B Welded on a container or a vertical pipe, body 15º 3 Hastelloy® C276 (EN 2.4819)P Body with a weld neck (**) 4 AISI904L (EN 1.4539)F Flange mounting 6 Titanium Ti-2 (EN 3.7035)T Flow-through body, threaded connection 8 Duplex (EN 1.4462)D Flow-through body, flange connection K 254 SMO®Process connection type, specified for mounting type FFlanges Flanges Wetted parts Code MaterialCode Type Code Type 2 AISI316L (EN 1.4404)T DN50 PN40 (***) A ANSI 3\"/150 lbs 3 Hastelloy® C276 (EN 2.4819) 4 AISI904L (EN 1.4539)D DN80 PN40 B ANSI 3\"/300 lbs 6 Titanium Ti-2 (EN 3.7035) 8 Duplex (EN 1.4462)J DN100 PN10/16 H ANSI 4\"150 lbs K 254 SMO® P1 PVDF PN10 (***)C DN100 PN40 G ANSI 4\"/300 lbs (P1 only suitable for flange codes D,A,E)K ANSI 2½\"/150 lbs (***) E JIS 10K 80 Wetted parts Code Material F JIS 40K 80 2 AISI316L (EN 1.4404) 3 Hastelloy® C276 (EN 2.4819)Process connection type, specified for mounting type T 4 AISI904L (EN 1.4539) Threads 6 Titanium Ti-2 (EN 3.7035) 8 Duplex (EN 1.4462)Code Type K 254 SMO®2 1” - NPT4 1.5”- NPT5 2” - NPTProcess connection type, specified for mounting type D Flanges Flanges Wetted partsCode Type Code Type Code MaterialG DN25 PN40 U ANSI 2\"/150 2 AISI316L (EN 1.4404)M DN40 PN40 V ANSI 2\"/300 3 Hastelloy® C276 (EN 2.4819)T DN50 PN40 K JIS 10K 25 4 AISI904L (EN 1.4539)H ANSI 1\"/150 R JIS 10K 40 6 Titanium Ti-2 (EN 3.7035)J ANSI 1\"/300 S JIS 10K 40 8 Duplex (EN 1.4462)N ANSI 1.5\"/150 X JIS 10K 50 K 254 SMO®P ANSI 1.5\"/300 L JIS 40K 25 Y JIS 40K 50Seals0 PTFE + 20C + 5Gr / FPM (std.) 4 PTFE + 20C + 5Gr / FPM+AISI316 / PTFE 50 % (Hard)1 PTFE 100% / FPM 5 PTFE 100% / FPM+AISI316 / PTFE 50% (Hard)2 PTFE +20C+5Gr / FFPM 6 PTFE 100% / FPM + PVDF 100% (Hard)3 PTFE 100% / FFPM 7 PTFE + 20C + 5Gr / EPDM 8 PTFE 100% / EPDMSensor connectionSensor connection types, see page 3Pt100 temperature sensor0 No sensorX With sensor (Measuring range -50 ... +200°CActuator AE1 Electric actuator 230 V 50 HzMD No actuator (manually operated AE3 Electric actuator 115 V 60 HzAD Double-action actuator A0 No actuator, fittings to the actuatorAS Spring-return actuatorSolenoid for actuator (only for actuator types AD and AS)0 No solenoid valve 2 24 V DC 2.5 W (also EEx dm) 4 28 V DC 0.4 W (EEx ia)1 230 V AC 50 Hz 2 W (as standard) 3 115 V AC 60 Hz 2 WSolenoid explosion proof 2 EEx ia IIC T6 (only 28V)0 No explosion proof 3 EEx dm IIC T5/T6 (only 24V)1 EEx m II T5Position switches0 None A Position switch EEX ib IIC T5/T6X Equipped with position switchesE Position switch NAMUR, DIN 19234Special options (not available for all configurations, ask for compatibility)Z1 For oxygen use Z4 Cutting ball Z5 Diamond-coated ballZ2 Process side flushing Z7 Process side flushing through the ball, only Ø12 / L = 120mm sensorsZ3 Actuator (AS) reverse action Material certificates (*) = Pipe Ø>DN60 with disassembly before welding,Documentation 0 No material certificateInstallation and operating instructions MC1 SFS-EN 10204-2.1 (DIN50049-2.1) (**) more information on manual page 10IE English MC2 SFS-EN 10204-2.2 (DIN50049-2.2) (***)IF Finnish = Body can be shaped to fit pipe with Ø>DN70 MC3 SFS-EN 10204-3.1B (DIN50049-3.1B) = Only available with manual operation MDSpecification example: PASVE pH D U2 0 O2 X AD3 1 E Z1 IEMC1

90

91

Index 92 G365 SATRON PASVE DUAL Mounting & Service Valve 01.07.2010 PASVE DUAL B PASVE DUAL T PASVE DUAL D (Welded on container or (Flow-through, (Flow through, vertical pipe, body 15º) threaded connection) flange connection) L 306 31 250 Ø115 BL W306 250 Ø140L depends on the sensor type M10/15 400 (type AS) 230 270 54 300PASVE DUAL D K H ØD FLANGE W ØD H PASVE DUAL T BH Code Type 55 108 48 77 48 H ANSI 1\" 150 lbs 55 124 48 THREAD 92 64 J ANSI 1\" 300 lbs 68 153 76 Code Type (dim.K) 104 76 U ANSI 2\" 150 lbs 68 165 76 V ANSI 2\" 300 lbs 55 115 48 2 1\" - NPT G DN25 PN40 68 165 76 4 1.5\" - NPT T DN50 PN40 5 2\" - NPTDimensions (in mm)Surface temperature Temperature class European Directive Information Ambient temperature T6 ATEX directive (94/9/EC) °C T5 Satron Instruments Inc. complies with the ATEX directive. 70 T4 85 European Pressure Equipment Directive (PED) (97/23/EC) 120 - Sound Engineering Practice European Certification: II 3 GDSensor connectionCode SensorA Standard sensor connection PG13.5 / Ø12 / length 120 mm

Index 93SATRON PASVE DUAL Mounting & Service Valve G365 01.07.2010Selection TablePASVE DUAL Wetted parts (C, B and P)Mounting typeC On container or horizontal Code Material pipe , welded none AISI316L (std.) 3 Hastelloy® C276B On container or vertical pipe, 4 AISI904L 6 Titaniumbody 15º, welded 8 Duplex (EN 1.4462) K 254 SMO®P Shape the body to be suitable to the pipe, weldedF On flangeT Flow-through, threaded connectionD Flow-through, flange connectionProcess connection type, specified for mounting type FFlanges Flanges Wetted partsCode Type Code Type Code MaterialT DN50 PN40 (only H ANSI 4\"150 lbs 2 AISI316L 3 Hastelloy® C276 manual using) G ANSI 4\"/300 lbs 4 AISI904L 6 TitaniumD DN80 PN40 E JIS 10K 80 8 Duplex (EN 1.4462) K 254 SMO®J DN100 PN10/16 F JIS 40K 80C DN100 PN40A ANSI 3\"/150 lbsB ANSI 3\"/300 lbsProcess connection type, specified for mounting type T Threads Wetted partsCode Type Code Material2 1” - NPT 2 AISI 316L4 1.5”- NPT 3 Hastelloy® C2765 2” - NPT 4 AISI904LProcess connection type, specified for mounting type D 6 Titanium 8 Duplex (EN 1.4462) K 254 SMO® Flanges Flanges Wetted partsCode Type Code Type Code MaterialG DN25 PN40 U ANSI 2\"/150M DN40 PN40 V ANSI 2\"/300 2 AISI316LT DN50 PN40 K JIS 10K 25 3 Hastelloy® C276H ANSI 1\"/150 R JIS 10K 40 4 AISI904LJ ANSI 1\"/300 S JIS 10K 40 6 TitaniumN ANSI 1.5\"/150 X JIS 10K 50 8 Duplex (EN 1.4462)P ANSI 1.5\"/300 L JIS 40K 25 K 254 SMO® Y JIS 40K 50Seals 4 PTFE + 20C + 5Gr / FPM+AISI316 / PTFE 50 % (Hard) 5 PTFE 100% / FPM+AISI316 / PTFE 50% (Hard)0 PTFE + 20C + 5Gr / FPM (std.) 6 PTFE 100% / FPM + PVDF 100% (Hard)1 PTFE 100% / FPM2 PTFE +20C+5Gr / FFPM3 PTFE 100% / FFPMSensor connectionA PG13,5 / Ø12 / 120 mmPt100 temperature sensor0 No sensorX With sensor (Measuring range -50 ... +200°CActuator AE1 Electric actuator 230 V 50 Hz AE3 Electric actuator 115 V 60 HzMD No actuator (manually operated A0 No actuator, fittings to the actuatorAD Double-action actuatorAS Spring-return actuatorSolenoid for actuator (only for actuator types AD and AS)0 No solenoid valve 2 24 V DC 2.5 W (also EEx dm) 4 28 V DC 0.4 W (EEx ia)1 230 V AC 50 Hz 2 W (as standard) 3 115 V AC 60 Hz 2 WSolenoid explosion proof 2 EEx ia IIC T6 (only 28V) 3 EEx dm IIC T5/T6 (only 24V)0 No explosion proof1 EEx m II T5Position switches A Position switch EEX ib IIC T5/T60 NoneX Equipped with position switchesE Position switch NAMUR, DIN 19234Special optionsZ1 For oxygen use Z5 Diamond-coated ballZ2 Process side flushing Material certificatesZ3 Actuator (AS) reverse action 0 No material certificateDocumentation MC1 SFS-EN 10204-2.1 (DIN50049-2.1) MC2 SFS-EN 10204-2.2 (DIN50049-2.2)Installation and operating instructions MC3 SFS-EN 10204-3.1B (DIN50049-3.1B)IE EnglishIF FinnishSpecification example: PASVE DUAL C 2 0 A X AD3 1 E Z5 IEMC1

Index 94

Index 95

Index 96

Index 97

Index 98PASVE SC/SF/SH/SP/ST Sampling Valve G347 The PASVE® SC/SF/SH/SP/ST is a miniature ball valve which readily accepts 01.07.2015 commercially available septum hygienic rubbers. The PASVE® SC/SF/SH/ SP/ST provides you with the opportunity of taking hygienic samples from Changing the your process without interrupting the process. rubber septum The PASVE® SC/SF/SH/SP/ST can be used in any industrial process where it is necessary obtain a sample from the process which is not in uenced or contaminated from any outside disturbances. The PASVE® SC/SF/SH/SP/ST is a member of the Satron PASVE® Series, which is commonly used with pH probes, oxygen sensors and Satron's high precision patented pressure and level transmitters. Technical Specifications Material Housing: AISI316L Gasket: PTFE / Silicone rubber seal Max. process pressure: 10 bar (150 psi) (subject to type of rubber septum selected) Max. process temperature: 120 °C (250 °F) (subject to type of rubber septum selected) Operation Taking a sample Position of taking a sample PROCESS We reserve the right for technical modifications without prior notice. PASVE is the registered trademark of Satron Instruments Inc. Satron Instruments Inc., P.O.Box 22, FIN-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 99 G347 PASVE SC/SF/SH/SP/ST Sampling Valve 01.07.2015PASVE SC PASVE SC - 10 PASVE SP PASVE SH PASVE ST PASVE SF - Tri-Clamp, sizes - Tuchenhagen, sizes - Flange SF D110 DN25/DN38 and DN25/DN32 and APV-FN1-50 DN40/51 DN40/DN50 - Flange SF D110Dimensions (in mm) 4,3 4 x 90° Ø11 PASVE SF 2 Ø90 - Flange SF D110 - Outer diameter of 10 10 flange is 110 mmPASVE SF Ø55,35 4 x 90° Ø11- Flange SF D110 Ø64 Ø70,6 APV-FN1-50 Ø90- Outer diameter of flange is 110 mm

Index 100 G347 PASVE SC/SF/SH/SP/ST Sampling Valve 01.07.2015 Dimensions (in mm)SC = 5,5 SC-10 = 10 57 Ø40 DN25/38 = Ø50,585 DN40/50 = Ø64 PASVE SC PASVE SH (Tri-Clamp) and SC - 10 - Sizes DN25/38 and DN40 / 51 Ø68 Ø50 Ø71 Ø53 Ø84 Ø66PASVE ST (Tuchenhagen) PASVE ST (Tuchenhagen)- Size DN40 / 50 - Size DN25 / 32 PASVE SPØ25