REFRIGERATED DRINKING TROUGH4.16 PRODUCT CODE 348 348 2000 348 348 Offset Fixing bracket 500 1800 40 TP6R 348 328 60 150 Refrigeration Unit Specs: 100 150 132Offset Fixing bracket 500 • ½” M&F BSP connection (supplied) 40 • Stop valve with ½ Female BSP required100 150 695 - 700 132 328 (not supplied) To comply with AS 1428.2 Refrigeration unit • Recommended fitting of dual action filter (not supplied) Rear mounting holes 320 Supplied with 1.5 metre • 1.5 metre 3 pin plug (supplied) 10 amp 3 pin plug 10mm John Guest inlet • Min. working pressure = 200kPa and outlet • Max. working pressure = 800kPaRear mounting holes • Water Temp: Factory set to 3°C 445 Mounting Centres 1350 MODEL TP6R Side ElevationTROUGHS 2000 Waste outlet always supplied at opposite end to disabled accessutlet always supplied ate end to disabled access 180 500 100 150 205205 MODEL TP6R Plan 2000 348 Offset Fixing bracket 500 1800 40 348 348 348 348 328 60 150 132#TP6R / REFRIGERATED DRINKING TROUGH 695 - 700 320 Refrigeration unit Rear mounting holes Supplied with 1.5 metre To comply with AS 1428.2 10 amp 3 pin plug 10mm John Guest inlet and outlet 445 1350 Mounting Centres Additional technical literature for this product can be downloaded from the Britex website. MODEL TP6R Front Elevation Waste outlet always supplied at opposite end to disabled access When specifying this 2000 product please include: 180 • Product Name and Code 205 • Product Dimensions • Custom lengths - consult Britex • Disabled access (left or right) • Disabled access (left or right) specifying500 options guide VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
PRACTICAL TROUGHImage shows Model TP7-F 4.17 TROUGHS Wall Mounted Trough with front fasciaScan QR codeto view online Image shows Model TP7-I Inset Troughfeatures • Inset and wall mounted models • 50mm waste supplied and • Standard and custom lengths • Radius internal corners - easy cleaning • Commercial grade 304 S.S. • Left or right hand waste positionbenefits • 450mm or 600mm wide • Ideal for schools, workshops and • Optional extended rear hob to fit tapware public amenitiesabout The BRITEX Stainless Steel Practical Trough is a versatile trough that can be used for a large #TP7 / PRACTICAL TROUGH range of applications, commonly in education projects. Inset and fascia style models are available for bench and wall mounting respectively. Made from 1.2mm grade 304 stainless steel and possessing square external corners it is available in custom lengths with either left or right hand waste position. Wall mounted models are supplied with heavy duty wall brackets and front legs are available if additional support is required.sample BRITEX 1.2mm grade 304 S.S. Inset/Fascia Practical Trough - XXXXL x 450/600W x 200D complete with spec. left/right hand 50mm waste outlet - Product Code TP7-X text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
PRACTICAL TROUGH4.17 PRODUCT CODE TP7-FW TP7-F Fascia style (600mm wide) Fascia style (450mm wide) TP7-IW TP7-I Inset style (600mm wide) Inset style (450mm wide) As Required 2020 171070 101000 3333 As Required 4040 202000 450TROUGHS Troughs over 2000mm long are supplied with a centre support bracket 55 340 55 170 100 33 55 55 20 55 55222525 5555 40 155 R25 155 454050 50mm Waste As Required 5555 225 MODEL TP7 - F Front Elevation and Plan200 55 MODEL TP7 - F Section 55 As Required Copper studs 225 with wingnuts 55 55 225 and fixing clips 450 340 55 55450 200 #TP7 / PRACTICAL TROUGH R25 225 55 55 200225 50mm Waste 55 450 225 55 450 5555 155 MODEL TP7 - I Section 55MODEL TP7 - I Front Elevation and Plan 155 specifying When specifying this options • Extended rear hob to accomodate guide product please include: tapware (80mm) • Product Name and Code • Tapware - See Tapware Section: 11 • Product Dimensions • Inset or Fascia styles • Tapware details (if required) • 450 or 600mm widths • Position of Waste Outlet (left/right) • Legs with Fascia styles • Left or right hand waste outlet VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
ART TROUGH Image shows Model TP8-F 4.18 TROUGHS Wall Mounted Trough with front fasciaScan QR codeto view online Image shows Model TP8-I Inset Troughfeatures • Inset and wall mounted models • Left or right hand waste position and • 480mm or 600mm wide • 50mm waste supplied • Made to custom lengths • Optional Pre-Plumbed tapwarebenefits • Radius internal trough corners for • Commercial grade 304 S.S. • Ideal for schools, workshops and easy cleaning • Rear hob for mounting tapware public amenitiesabout The BRITEX Stainless Steel Art Trough is a versatile trough that can be used for a large range of applications, commonly in education projects. Inset and fascia style models are available for bench and wall mounting respectively. Made from 1.2mm grade 304 stainless steel and #TP8 / ART TROUGH possessing rounded corners it is easy to clean and is available in custom lengths with either left or right hand waste position. Wall mounted models are supplied with heavy duty wall brackets and front legs are available if additional support is required.sample BRITEX 1.2mm grade 304 S.S. Inset/Fascia Art Trough - XXXXL x 480/600W x 150D complete with left/ spec. right hand 50mm waste outlet - Code TP8- X text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
ART TROUGH4.18 As Required 40 150 170 100 33PRODUCT CODE TP8-FW40 480TP8-F 270 Fascia style (600mm wide) TROUGHSFascia style (480mm wide) 170 100 33 TP8-IW 48012 12 35 170 100 33TP8-I 40 Inset style (600mm wide) 12 80Inset style (480mm wide) As Required150 150 286 80 40 270 48012 480 480 167 40 40 270 270 As Required 480 12 12 As Required 35 80 12 Troughs over 2000mm long are supplied with a centre support bracket 80 Ø50mm Waste 270 MODEL TP8-F Plan and Front EAlseRveaqtuiiorend 270 MODEL TP8-F Section As Required 480 167 35 35 167 12 12 80 As Required 270 Ø50mm Waste MODEL TP8-I Section#TP8 / ART TROUGH 12 286 80 480 MODEL TP8-I Plan and Front Elevation 270 150 As Requiredspecifying When specifying this options • Tapware - see Tapware Section: 11 286 80 guide product please include: • Tap Holes • Custom lengths • Product Name and Code • Inset or Fascia styles • Product Dimensions • 480mm or 600mm widths • Tapware details (if required) • Legs with Fascia style • Position of Waste Outlet (left/right) • Left or right hand waste outlet 167VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
OUTDOOR LEARNING TROUGH 4.19 TROUGHSScan QR codeto view online Image shows Model TP9-2-TW-9101-1100 Outdoor Learning Trough with 2 Eco Timed Flow Pillar Tapsfeatures • Suits Covered Outdoor Learning Areas • Lockable lid to protect fixture and (COLA) and ideal for education projects when not in usebenefits • Conforms to NSW DOC education • Commercial grade 304 S.S. standards and available pre-plumbed • 50mm waste supplied with NSW DOC approved tapware • Standard and custom lengths • Optional Plaster & Clay Arrestor : p 5.02 • Concealed tapware connections • Strong, integral SHS S.S. support frame • Radius external corners - added safetyabout The BRITEX Stainless Steel Outdoor Learning Trough is designed specifically to conform to #TP9 / OUTDOOR LEARNING TROUGH education department standards for Covered Outdoor Learning Areas (COLA) and incorporates rear hob for mounting hand wash taps, bench space, extended rear splashback and radius front and rear corners for added safety - as well as a lockable lid that protects tapware outside of school hours. A support frame underneath with adjustable feet provides a strong, free standing base. Available in standard (1100mm) and custom lengths where required, it can be supplied pre-plumbed with WaterMark and WELS certified hand wash taps conforming to NSW education standards. Optional BRITEX Plaster and Clay Arrestor - OSPC: p 5.02sample BRITEX 1.2mm grade 304 S.S. Outdoor Learning Trough - 1100L x 500W x 950H. Complete with lockable lid, spec. radius external corners, right hand bowl to be 600 x 335 x 150 O/A with 50mm waste, 300mm upstand to rear, text and 32mm SHS stainless steel frame under - Product Code TP9 *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
OUTDOOR LEARNING TROUGH4.19 PRODUCT CODE TP9P Pre-Plumbed Outdoor Learning Trough TP9 Trough only - no tapware HOW TO SPECIFY: Outdoor Learning Trough 1.2mm 304 #4 stainless steel (PRE-PLUMBED optional) 1382 Sample Specification Code 1100 R25 150 250 Rear AB C D 600 S.S. Panel TP9P - 2 - TW-9101 - 1100 50 = Outdoor Learning Trough Pre-Plumbed with 2 Eco Timed Flow Pillar Taps, 1100mm long 32mm S/S LegsTROUGHS Specification Key C = Tap Code 500 50mm P&W 60 (see below for suggested 50 115 A = Product Code tapware options) TP9 : Trough only 335 TP9P : Pre-Plumbed D = Trough Length (mm) B = Tap Quantity Suggested Tapware: Adjustable Foot 50 (see Tapware Section: 11 for complete range of options) MODEL TP9 Side ElevationR25 140 TW-9101 TW-0020 400 Eco Timed Flow Vandal Resistant Pillar Tap DPW (NSW) Deluxe Pillar Tap Padlock by others 1.2mm 304 #4 stainless steel 1382 300 1100 150 250 Rear 140 150 R25 600 S.S.50 500 Panel 50 50mm P&W#TP9 / OUTDOOR LEARNING TROUGH 32mm S/S Legs 60 115 650 335 50 R25 Adjustable Foot 140 MODEL TP9 Plan MODEL TP9 Front Elevation 400 When specifying this • Plaster & Clay Arrestor (OSPC): p 5.02 product please include: • Tap holes specifying options • Pre-plumbed tapware guide • Product Name and Code • Custom trough dimensions • Product Dimensions • TapwaPardelodckebtay ioltshe(risf required) • Tap Hole details 1382 300l VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE.140 150 Due to ongoing research and our commitment to product650 development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
MULTI KNEE OPERATED TROUGH 4.20 TROUGHSScan QR codeto view onlinefeatures • Made to custom lengths Image shows Model TMKO with low level spouts and • Incorporates multiple wash stations • Supplied pre-plumbed ready to install • Includes pressure limiting valvebenefits • Only one water and waste connection • Grade 304 S.S. • Hands-free activation • 50mm waste outlets • Prevents cross-contamination • Heavy duty stainless steel brackets • No electrical connections • Low level or gooseneck spout option • Ideal for food handling and processing facilities.about The BRITEX Multi Knee Operated Trough is ideal for areas where automated hand washing #TMKO / MULTI KNEE OPERATED TROUGH is required without using electronic / powered tapware. Pre-plumbed taps are activated by leaning against the heavy duty push panel at the front of the trough. Made from 1.2mm grade 304 stainless steel it is available in custom lengths with as many wash stations as required and with either left or right hand waste outlet. Low level basin spouts are provided as standard with goose neck outlets available upon request. Ideally suited to food processing, health and education projects, installation is quick and easy.sample BRITEX S.S. Multiple Knee Operated Trough - XXXXL x 450W x 150D. Complete with X No. pre-plumbed spec. Knee Operated Wash Stations with low level/gooseneck spouts and left/right hand 50mm waste outlet. text Supplied complete with mixing unit and integrated pressure limiting valve - Product Code TMKO *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
4.20 MULTI KNEE OPERATED TROUGH PRODUCT CODE TMKO300 450 60 310 80 1/2\" BSP hot and cold 251 150 water entries located As Required 1c/e2n\"tBerSoPfhtorotuagnhd cold 40 water entries loc4a0ted As Required center of trough 150 40 40 185 450 450 215 215TROUGHS00 400 135 110 Suggested mounting135 height: 850-900mm AFL 140 Plan MODEL TMKO SSeicdtioenElevation Plan MODEL 1T40MKO Plan 600 min 300 60 300 600 min 300 60 300 150 150 251 251 300 300 300 400 400 300 300 300 135 135 135 135110 110#TMKO / MULTI KNEE OPERATED TROUGH Front Elevation Front Elevation MODEL TMKO Front Elevation specifying When specifying this options • Splashback to side(s) guide product please include: • Support legs • Gooseneck or low level spout • Product Name and Code • Custom inlet position • Product Length • Tempering Valve • Position of Waste Outlet (left/right) • No. of knee operations • Spout Type (gooseneck or low level) B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
PHOTO TROUGH 4.21 Optional Acid ResistantGrade 316 Stainless Steel Waste Outlet (LSPW) TROUGHSScan QR codeto view online Image shows Model LPTI-TW-SET-02-1800-S Inset Photo Trough 1800mm long with Fixed Spout Basin Set and Stainless Wastefeatures • Inset and fascia models • Wide end flange for mounting tapware and • Grade 316 acid resistant S.S. • Fully welded construction • Standard and custom lengths • Supplied with fixing studs and clipsbenefits • Radius internal corners - easy cleaning • Optional WELS and WaterMark • Optional acid resistant S.S. waste certified tapwareabout The BRITEX Stainless Steel Photo Trough is designed to be used in dark rooms for developing #LPT / PHOTO TROUGH photographs. An extra wide flange at one end allows for taps to be mounted into a secure, hygienic surface whilst internal bowl radius corners ensure trough is easy to keep clean and maintain. Made from 1.2mm grade 316 stainless steel it is available in custom lengths if required and an acid resistant waste outlet is optional.sample BRITEX grade 316 S.S. Inset/Fascia Photo Trough - 1800L x 600W x 150D O/A. Complete with X No. tap holes spec. and BRITEX Stainless Steel 50mm WaterMark certified Waste Outlet made from acid resistant grade 316 S.S. text - Product Code LPT *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
4.21 50 80 127 127 600 Typical Tapset Configuration 50 50 PHOTO TROUGH PRODUCT CODE LPTI Inset Style LPTF145 Fascia Style HOW TO SPECIFY: Photo Trough 150 1800 600 600 25 38 38 50 50 1800 150 30 Sample Specification Code 50mm P&W 50mm P&W A B CD 80 MODEL LPTI Section 80 MODEL LPTF Section LPTI - TW-SET-02 - 1800 - S Configuration 127 127 38 50 2255 Typical Tapset Configuration = Inset Photo Trough with a Basin Mounted Set with Fixed Spout, 1800mm long, Stainless Steel WasteTROUGHS 600 Specification Key 600 127 127 Typical115T5a00pset 11880000 660000 38 50 50 2525 5500 A = Product Code 1800 38 LPTI : Inset C = Trough Length (mm) 1800 600 LPTF : Fascia D = Waste Type 600 S : Stainless Steel 15 1050 50 B = Tap Code P : Polypropylene 50 55 138 (see below for suggested 145 660000 tapware options) 3388 Suggested Tapware: 1800 5050 5500 5050 5500 5500 600 8800 12 1727 12 1727 112277 112277 600 38 38 TyTpiycpialcaTlaTpaseptseCtToTyCynpfiopiicngcfailualrgTauTtariapaoptsinseoettnCCoonnfifigguurraatitioonn 600 (see Tapware Section: 11 for complete range of options) 50 80 38 50 80 38 600 660000 5500 38 38 150 606000 50mm P&W 5 5 38 114455 80 8800 80 TW-SET-02 TW-SET-03 MO14D5 EL LPTF Side Elevati11o8800n00 and 127 127 Plan 80 Basin Mounted Set Hob Sink Set with 145 Typical Tapset Configuration with Fixed Spout Swivel Gooseneck Spout 115500 138 15 1050 1800 1800 TW-MIX-15 Basin Mounted 3388 Mixer Tap 3838 3388 3838 3388 12 1727 12 1727 112277 112277 38 TyTpiycpialcaTlaTpaseptseCtToTyCynpfiopiicngcfailualrgTauTtariapaoptsinseoettnCCoonnfifigguurraatitioonn 38 660000#LPT / PHOTO TROUGH 606000 113388 138 138 MODEL LPTI Side Elevation and Plan specifying When specifying this options • Tapware - see Tapware Section: 11 guide product please include: • Inset or Fascia styles • Stainless Steel or Polypropylene Waste • Product Name and Code • Custom trough dimensions • Product Dimensions • Waste Type (Stainless Steel or Polypropylene) • Taphole configuration • Tapware details (if required) VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
SCREEN PRINT TROUGH 4.22 TROUGHSScan QR codeto view onlinefeatures • 1.2mm, grade 304 S.S. Image shows Model TSP with optional support legs and • Full height splash back • Integrated tubular overhead rack • Heavy duty mounting bracketsbenefits • Deep trough • Optional adjustable support legsabout The BRITEX Stainless Steel Screen Print Wash Trough has been designed for schools and the #TSP / SCREEN PRINT TROUGH textile industry where there is a requirement to wash and dry silk screens. The trough has a full height splash back incorporating a drying rack for holding screens. The design allows for washing and drying screens without splashing surrounding areas and is supported by wall brackets and optional front support legs with adjustable feet.sample BRITEX S.S. Screen Print Trough - 1500L x 450W x 1850H O/A. Complete with 32mm SHS overhead rack, spec. wall mounting brackets, front support legs and left/right hand 50mm waste outlet - Product Code TSP text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
4.22 30 SCREEN PRINT TROUGH 300 160 160 PRODUCT CODE Galvanized 40 mounting TSP Trough with brackets only 700 brackets TSPL Trough with brackets and legs Optional 1500 S.S.legs with 225 high impact nylon adjustable feet 450 TROUGHS 145 450 MODEL TSP/TSPL Plan 32 220 220 220 220 220mm 32 X 32mm 47 tube SHS S.S tube 200ork framework 400 Offset Ø20 mounting strip 1550 1350 1350 #TSP / SCR 45E0EN PRINT TROUGH 30 300 300 40 50mm waste 160 160 700 Galvanized mounting 1500 225 brackets Optional MODEL TSPL Front Elevation MODEL TSPL Side Elevation S.S.legs with ahdigjuh1s5itm0abp0laecfteneytlon When specifying this product please include: 450 • Product Name and Code • Product Dimensions options • Legs 145 specifying • Position of Waste Outlet (left/right) • Tap holes guide • Custom si1z4e5s • Left or right hand waste VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
SURGEON’S SCRUB TROUGH 4.23 Image shows Model TST-WM TROUGHS Wall Mounted ModelScan QR code Image shows Model TST-FMto view online Floor Mounted Modelfeatures • Used in Australia’s finest hospitals (Taps shown for indicative purposes only) and • Suits scrub up procedure • Double skinned, robust construction • 50mm waste suppliedbenefits • Grade 304 or 316 acid resistant S.S. • Radius internal corners - easy cleaning • Left or right hand waste position • Made to custom lengths • Fully welded internal surfaces for • Optional sensor or lever tapware • Optional support frame & storage under a seamless, hygienic finish • Optional splashback orientation • Supplied with wall fixingsabout BRITEX Stainless Steel Surgeon’s Scrub Troughs are found in many of Australia’s finest hospitals #TST / SURGEON’S SCRUB TROUGH and medical facilities. Designed specifically to suit the requirements of scrub up procedures, they are ‘double skinned’ with 1.2mm grade 304 or grade 316 acid resisting stainless steel to ensure optimal hygiene standards. Upstands can be supplied to each end when between walls, or with upstand to rear only. All Scrub Troughs are custom made to length as required with outlets available at either left or right hand end. Additional options include sensor activated tapware and a support frame underneath with removable access panels for storage and maintenance.sample BRITEX grade 304/316 S.S. Surgeon’s Scrub Trough - XXXXL x 470W. Double-skinned construction spec. with 18mm HMR bonded substrate, high splashback to rear and sides, complete with SHS support frame text under wall fixings and left/right hand 50mm waste outlet. To be installed freestanding/between walls - Product Code TST-XX *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
SURGEON’S SCRUB TROUGH4.23 PRODUCT CODE TST-FM Floor Mounted TST-WM Wall Mounted (Supplied with support frame under and removable front panels) HOW TO SPECIFY: Surgeon’s Scrub Trough 470 As Required 130 Sample Specification Code 130 A B C D EF MODEL TST-WM/TST-FM Plan TST - FM - 304 - 1800 - RO - R = Surgeon’s Scrub Trough, Floor Mounted, Grade 304 S.S. 1800mm long with Splashback to Rear Only, Right Hand WasteTROUGHS Specification Key D = Trough Length (mm) A = Product Code E = Splashback Options RO : Rear Only B = Mounting Options RE : Rear and Both Ends FM : Floor Mount (supplied RL : Rear and Left End with removeable access RR : Rear and Right End panels and support frame) WM : Wall Mount F = Waste Outlet Position L : Left Hand Waste C = Grade of Stainless R : Right Hand Waste 304 : Commercial Grade 316 : Acid Resistant Grade As Required As Required 470 470 25 25 25 25 25 25 800 780 Offset Offset 450 mounting 50mounting 450 800 strip 780strip 800 800 50 53 53 392 392 R25 35 R25 330 350 35 1400 330 350 1400 950 950#TST / SURGEON’S SCRUB TROUGH 50mm Waste 50mm Waste 470 600 fwOropitnthitorpneamanl oefrvlaemabfOwerlopietnthitorpneamanl oefrvlaemabele 587 Ref 600 587 Ref Front panel ecolFteovrvoiansnutgetitdpvainneyll elevated to suit vinyl coving 229 22(Mb9aysoonthryerfsi)xing(Mbsaysoonthryerfsi)xings MODEL TST-FAsMReFquroirendt AEsleRveaqutiiroedn MODEL TST-FM Section 130 470 When specifying this 130 product please include: • Available in custom sizes specifying • Product Name and Code options • Tapware - see Tapware Section: 11 guide • Product Dimensions • Floor Mounted or Wall Mounted • Grade and Thickness of S.S. • 1.2mm or 1.6mm S.S. 130 130 • Tapware details (if required) • 304 or 316 grade S.S. • Position of Waste Outlet (left/right) • Left or right hand waste • End Type - between walls or freestanding B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
WUDU FOOT WASH TROUGH 4.24 TROUGHSScan QR codeto view online Image shows Model TWUDU with optional heavy duty S.S. stoolsfeatures • Designed for foot washing/Wudu • Optional heavy duty S.S. stool(s) and • Used in Islamic cultural buildings • Manufactured to custom lengths • Commercial grade 304 S.S. • Hinged grate for easy cleaningbenefits • Integral foot rest • Installed between walls • Floor Mounted or Recessed Models • Freestanding end(s) optionalabout The BRITEX Stainless Steel Wudu Foot Wash Trough is designed specifically for the foot washing #TWUDU / WUDU FOOT WASH TROUGH process during wudu in Islamic cultural buildings. Manufactured from durable 1.2mm grade 304 stainless steel wudu troughs incorporate an angled rear foot resting ledge and a hinged floor grate below to allow for ease of cleaning. All units are made to custom lengths to fit between walls. Freestanding units can be supplied where required. Heavy Duty S.S. stools optional.sample BRITEX Wudu Foot Wash Trough - Grade 304 stainless steel. XXXXmmL x 400mmW O/A. Floor Mounted/ spec. Recessed model, supplied complete with foot resting ledge, hinged grate 50/100 mm waste outlet to left/ text right hand end, and X No. of Heavy Duty S.S. Stools - Product Code TWUDU *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
WUDU FOOT WASH TROUGH 4.24 PRODUCT CODE Suggested Tapware (supplied separate): TWUDU TW-SET-01 TW-0008 Wall Sink Set with Vandal Resistant Fixed Spout Deluxe Bib Tap Optional S.S.Ostpotoiol nal S.S. stool As Required As Required 15 15 15 15 400 400 Ø305 Ø305 As Required 160 100 100 160 Foot rest Foot rest Optional S.S. stool TROUGHS 400 Ø305 450 450 450 290 100 Foot rest2 19600 457 Step on S.S. gSrtaetpe on S.S. grate 457 457 50 290 Step on S.S. grate 50 50 1:80 Fall To W1:a8s0teFMalilnTimo uWmaste Minimum 1.6mm S.S. 1.6mm S.S. angle legs angle legs 200 200 130 130 1:80 Fall To Waste Minimum 100 100 200 1.6mm S.S. angle legs MODEL TWUDU Front Elevation 20 MODEL TWUDU 1S0e0ctionR: ReceecsseesdseMdoRdMecloedsseeld Model 20 20 130 11330015 400150 150 150 Optional S.S. stool 400 ROepcteiossneadl SM.So.dsetol ol 100 290 160 130 100 Ø305 #TWUDU / WUDU FOOT WASH TROUGH 400 400 Ø305 Foot rest 290 160 Foot rest 400 457 20 20 20 20 20 525 Step on S.S. grate 20 Step on S.S. grate 82 200 1.6mm S.S. 1.6mm S.S.200 angle legs angle legs 100 100 MODEL TWUDU Plan MODEL TWUDU Section: Floor Mounted Model Floor Mount Model Recessed Model specifying When specifying this options • Custom Lengths guide product please include: • Freestanding Ends • Left or Right Hand Waste • Product Name and Code • 100mm or 50mm waste outlet • Product Features • Floor Mounted or Recessed • Product Dimensions • Heavy duty S.S. stools • Floor Mounted or Recessed • Position of Waste Outlet (left/right) • End Type - between walls or freestanding • No. of Stools (if required) VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
SOLVENT & OIL INTERCEPTOR 5.01Scan QR code TANKS & DRAINAGEto view onlinefeatures • Standard (100L) and custom sizes • Purpose built to suit your application and • Quick release lid • Grade 304 or 316 S.S. • Sealant rubber gasket under lid • Ideally suited to commercial kitchens,benefits • Quality components for durability • Installed above ground screen print work shops, and mild chemical preparation areasabout The BRITEX Solvent & Oil interceptor is manufactured from 1.2mm grade 304 stainless steel. #OSSO / SOLVENT & OIL INTERCEPTOR This unit is generally used in commercial kitchens and mild chemical preparation areas to separate and draw off grease, oil and solvents from waste water. Internally, the baffle slows incoming waste water, allowing solvents/oils to separate from the clean water, floating to the top, whilst the clean water draws to the bottom, entering the waste outlet positioned at the bottom of the tank. A sampler valve is fitted as standard to monitor water conditions. Available in custom and standard sizes.sample BRITEX grade 304 S.S. Solvent & Oil Interceptor - 850L x 400W x 500H O/A. 100 Litre capacity. Lid sealed spec. with an internal rubber gasket and quick release clips - Product Code OSSO text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.01 SOLVENT & OIL INTERCEPTOR PRODUCT CODE OSSOTANKS & DRAINAGE MODEL OSSO Side Elevation MODEL OSSO Plan#OSSO / SOLVENT & OIL INTERCEPTOR MODEL OSSO Front Elevation When specifying this • Grade 304 or 316 stainless steel product please include: • Custom capacity and dimensions specifying • Product Name and Code options guide • Product Dimensions • Grade of Stainless Steel VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
PLASTER & CLAY ARRESTOR 5.02Scan QR code TANKS & DRAINAGEto view onlinefeatures • Prevents solid waste entering • Installed above ground and plumbing • Custom sizes available • Compatible with BRITEX Clay andbenefits • Easy to clean removable capture box • Lid secured by quick release clips Ablution Troughs (TCA/TCAI) • Airtight lid sealed by internal gasket • Used in education, medical and • 44 litre capacity art projectsabout The BRITEX Plaster & Clay Arrestor is manufactured from 1.2mm grade 304 stainless steel. #OSPC / PLASTER & CLAY ARRESTOR This unit is generally used in medical facilities, art rooms and studios or wherever solids are combined with liquids. This tank controls solid particles by filtering solids through a solids capture box, baffles and perforated sheet filter screens and the lid is secured by quick release clips. Available in custom and standard sizes as required.sample BRITEX grade 304 S.S. Plaster and Clay Arrestor - 594L x 312W x 424H O/A. 44 Litre capacity. Lid to be spec. removable with quick release clips. Complete with removable solids capture box and outlet skimmer box. - text Product Code OSPC *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.02 PLASTER & CLAY ARRESTORTANKS & DRAINAGE PRODUCT CODE OSPC MODEL OSPC Front Elevation MODEL OSPC Plan#OSPC / PLASTER & CLAY ARRESTOR MODEL OSPC Side Elevation specifying When specifying this options • Grade 304 or 316 stainless steel guide product please include: • Custom capacity and dimensions • Base with castors • Product Name and Code • Product Dimensions • Product Features VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
NEUTRALIZING TANK 5.03Scan QR code TANKS & DRAINAGEto view onlinefeatures • Purpose built to suit your application • Quality components for durability and • Manufactured from 316 stainless • Quick release lid with gasket seal • Made to any size • Used in photographic studios andbenefits • Installed above ground laboratoriesabout The BRITEX Neutralizing Tank is manufactured from 1.2mm grade 316 stainless steel. This unit #OSNT / NEUTRALIZING TANK is generally used in chemical preparation areas and refineries, where it is necessary to condition liquid waste prior to release into the waste system. Water passes through the marble chips/ conditioning block (not supplied) upon entry which neutralises the water pH balance prior to exiting the tank. Available in custom and standard sizes as required.sample BRITEX grade 316 S.S. Neutralizing Tank - 600L x 400W x 450H O/A. 80 Litre capacity. 3 x 20mm wide baffles. spec. Lid to incorporate airtight sealing gasket and be secured with quick release clips - Product Code OSNT text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.03 NEUTRALIZING TANK PRODUCT CODE OSNT Ø50mm Inlet Socket 75 600 Ø65mm Outlet nipple 25 Quick release S.S. clips with 19mm sampling nippleTANKS & DRAINAGE static water level 345 450 100 Sampling block retaining lug: 30x5mm with Ø25mm HOLE 75(sampling block not supplied) Ø50mm Inlet Socket 100 600 Ø65mm Outlet nipple Conditioning block 25 Quick release S.S. clips with 19mm sampling nipple /marble chips (not supplied) S.S. baffles static75 water level 75 195 600 345 Ø50mm Inlet SocMkeOt DEL OSNT Front Elevation 450 75195 75 600 100 Sampling block retaining lug: Quick release S.S. clips 7530x5mm with Ø25mm HOLE (sampling block not supplied) 75 400 100 Ø65mm Outlet nipple 25 25 with 19mm sampling nipple /marble cChoipnsd(itnioont isnugpsbptalltoiieccdk) water level 75 195 S.S. baffles 450 400 600 Sampling block retaining lug: 25 345 30x5mm with Ø25mm HOLE (sampling block not supplied) 195 75 100 100 Conditioning block S.S. baffles /marble chips (not supplied)#OSNT / NEUTRALIZING TANK 600 75 75 195 195 MODEL OSNT Plan400 MODEL OSNT Isometric View 25 When specifying this • Custom capacity and dimensions product please include: • Product Name and Code • Product Dimensions specifying options guide VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
SETTLING TANK 5.04Scan QR code TANKS & DRAINAGEto view onlinefeatures • Prevents solid waste entering plumbing • Custom sizes available and • Lid secured by quick release clips • Installed above ground • Airtight lid sealed by internal gasket • Outlet pipe fitted with sampling valvebenefits • Grade 304 stainless steel • Commonly used in art rooms work shops • 100 Litre capacity standard and medical/dental projectsabout The BRITEX Settling Tank is manufactured from 1.2mm grade 304 stainless steel. This unit is #OSST / SETTLING TANK generally used in art rooms, dental/medical facilities and workshops or wherever solids are combined with liquids. The angled inlet pipe directs water downwards upon entering the tank, allowing solid particles such as paint, plaster, clay and dirt to settle in the bottom of the tank, whilst clean water sits above and exits through the outlet at the top of the tank. Collected waste is periodically cleaned from the tank by removing the lid that is secured by quick release clips. Available in custom and standard sizes as required.sample BRITEX grade 304 S.S. Settling Tank - 600L x 400W x 560H O/A. 100 Litre capacity. Outlet to incorporate spec. sampling valve. Lid sealed with an internal rubber gasket and quick release clips - Product Code OSST text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.04 SETTLING TANK PRODUCT CODE OSST 400 Ø50mm Inlet Quick release clips 100 Baffle Ø65mm Outlet with 560 static water level 150 19mm sampling nipple 50 433 19mm drain nipple TANKS & DRAINAGE 450 MODEL OSST Side Elevation 600400 Ø50mm Inlet Quick release clips 100 600400 Ø50mm Inlet Baffle Ø65mm Outlet with 19mm sampling nipple Quick release clips 100 Ø65mm Outlet with400 19mm sampling nipple Baffle 150 150 static water level 19mm drain nipple 450 50 level 433 433 19mm drain nipple static water 50 450 600 MODEL OSST Front Elevation 660000 600 400 400 #OSST / SETTLING TANK MODEL OSST Plan When specifying this • Custom capacity and dimensions product please include: • Product Name and Code • Product Dimensions specifying options guide VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
GREASE INTERCEPTOR 5.05Scan QR code TANKS & DRAINAGEto view onlinefeatures • Sealant rubber gasket under lid • 100 Litre capacity standard and • Quick release lid • Custom sizes available • Manufactured from grade 304 S.S. • Installed above groundbenefits • Removable cap on outlet pipe to easily • Ideally suited to commercial kitchens and dislodge internal blockages food preparation areasabout The BRITEX Grease Interceptor is manufactured from 1.2mm grade 304 stainless steel. This unit #OSGI / GREASE INTERCEPTOR is generally used in commercial kitchens and food preparation areas to prevent grease and oils entering sewer pipes. The baffle near the inlet slows the flow of water entering the tank, causing the water to cool. Water separation then occurs where heavy solids (grease) sinks to the bottom of the tank and oils to float to the top, whilst clean water exits through the outlet positioned at the back of the tank. Collected waste is periodically cleaned from the tank by removing the lid that is secured by quick release clips. A cap on the top of the outlet pipe can be removed to dislodge any solids or blockages should they occur. Available in custom and standard sizes as required.sample BRITEX grade 304 S.S. Grease Interceptor - 600L x 400W x 600H O/A. 100 Litre capacity. Outlet to incorporate spec. removable cap. Lid sealed with an internal rubber gasket and quick release clips - Product Code OSGI text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.05 GREASE INTERCEPTOR PRODUCT CODE OSGI 400 Rubber Seal sta 600 600 50mm 75 Female 252 50 TANKS & DRAINAGE 600 Inlet Socket Baffle 400 400 502 50mm Female Inlet Socket Baffle MODEL OSGI Plan MODEL OSGI Front Elevation 400 502 75 Rubber Seal 252 50400 Rubber Seal Removable Cap 32mm Vent Socket 600static water level 50mm 75 65mm outlet Removable Cap Female 252 50 150 static water level Inlet Socket Baffle 502 150 400 435 400 32mm Vent Socket 435 65mm outlet400 #OSGI / GREASE INTERCEPTOR MODEL OSGI Side Elevation When specifying this • Custom capacity and dimensions product please include: • Product Name and Code • Product Dimensions specifying options guide VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
CONICAL FLUSHING FLOOR WASTE 5.06WaterMark ATS 5200.040Scan QR code TANKS & DRAINAGEto view onlinefeatures • WaterMark certified (ATS 5200.040) • Conical body for efficient flushing and • Heavy gauge stainless steel • Supplied with adjustable stainlessbenefits construction steel ‘P’ trap • Removable grate for ease of cleaning • Concealed internal flushing rim • Compatible with numerous flushing • Perfect for schools, aged care and mechanisms medical facilities • Models suit concrete or vinyl flooring #FFWC / CONICAL FLUSHING FLOOR WASTEabout The BRITEX Conical Flushing Floor Waste is manufactured from heavy gauge stainless steel and suited specifically to schools, hospitals, aged care facilities, mortuaries and veterinary clinics. WaterMark certified, Robust in construction and supplied complete with an adjustable 100mm dia. stainless steel P Trap, the conical body of the unit ensures efficient flushing and easy cleaningsample BRITEX S.S. Conical Flushing Floor Waste - 390mm dia. to suit vinyl/concrete floor. WaterMark certified. spec. Complete with adjustable 110mm dia. stainless steel P Trap and removable grate - Product Code FFWC- X text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.06 CONICAL FLUSHING FLOOR WASTE PRODUCT CODE FFWC-C (suits concrete floors) FFWC-V (suits vinyl floors) 150 150 Ø390 Ø390 470 470 80 150 Ø390 Ø390470 Line of FinisLhiende FolfoFoirnLisehveedl Floor Level Ø390 80 Line of Finished Floor Level Ø390 80TANKS & DRAINAGE 79 431 NOM. 79 265 NOM. 265 NOM. 79 Ø110 79 38 265 NOM. 79 Ø110 60 210 NOM. 60 210 NOM. 265 NOM. 79 265 ØN11O0M. 60 210 NOM. 431 NOM. 510 NOM. 510 NOM. 510 NOM. 510 NOM.Ø38 Ø38 265 NOM. 431 NOM. 510 NOM. 510 NOM. Ø38 Ø110 Ø110 300 190 c/l 190 c/l 38 Ø110 300 190 c/l 300 38 245 245 190 245 190 245 214950 245 135 c/l 135 c/l 1353c3/0l 330 330 MODEL FFWC-V Front and Rear Elevation 540 540 Ø390 540Ø390 150 150 195 Ø391095 150 Ø100mm WaØs1t0e0Pmipme Waste PipeØ110195 Ø110 Ø100mm Waste Pipe Ø110 Ø38mm FlusØh3p8ipmemEnFtluryshpipe Entry 80 Indicative poInsditiicoantiovnelyposition only Ø38mm Flushpipe Entry 80 traInpdcicaantifvaecteproaapsniytcioadnireofacnctlieyonany direction retsrpaepcctiavne ftaorceeisnpaleentcytpidvipiereetcotionnlet pipe 80 (Drreospppeectrivine(btDooroointp)leptepr ipneboot)#FFWC / CONICAL FLUSHING FLOOR WASTE Ø38 (Dropper in boot) Ø38 195 MODEL FFWC-V Section 195 Ø390 Ø390 470470Ø38 195 Ø390 470 5mm Stainle5sms mSteSetlaCinolevsesr Steel Cover 5mmwSittahinØle2s0smSmtweeiHtlhoClØeosv2e0rmm Holes with Ø20mm Holes MODEL FFWC-V Plan When specifying this • Grade 316 stainless steel body product please include: • Custom sizes specifying • Product Name and Code options guide • Overall Product Dimensions • Product Features • Concrete or Vinyl floor model VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
FLUSHING FLOOR WASTE 5.07WaterMark ATS 5200.040Scan QR code TANKS & DRAINAGEto view onlinefeatures • WaterMark certified (ATS 5200.040) • Standard or custom sizes available and • 25mm flushing perimeter sparge • Removable bar grate • Optional stainless P trap waste • Ideal for hospitals, food processingbenefits connection facilities and commercial kitchensabout The BRITEX Flushing Floor Waste is manufactured from either 1.2mm or 1.6mm grade 304 or 316 #FFW / FLUSHING FLOOR WASTE stainless steel. WaterMark certified, this unit consists of a flushing hopper which can be fixed to the floor using the perimeter flanges. The unit comes with a 100mm diameter waste dropper which fits easily into PVC pipe work. The flushing ring to the hopper transition allows all internal surfaces to be fully flushed which assists in maintaining high standards of hygiene.sample BRITEX S.S. Flushing Floor Waste - Grade 304/316 S.S. 450x450mm, complete with 110mm dia. adjustable spec. stainless steel P Trap and removable grate. WaterMark certified - Product Code FFW text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.07 FLUSHING FLOOR WASTE PRODUCT CODE FFW 450 5500 50 30 445500 3300TANKS & DRAINAGE 25mm Socket at 35° 335500 350 2255mmmm SSoocckkeett aatt 3355°° 3300 30 Ø100 ØØ110000 450 450 445500 445500 MODEL FFW Front Elevation 450 30 445500 3300#FFW / FLUSHING FLOOR WASTE 332255oop3pe2en5ininongpgening 445500 450 3300 30 325 opening MODEL FFW Isometric View 332255 ooppeenniinngg MODEL FFW Plan When specifying this options • 304 or 316 grade stainless steel product please include: • Custom sizes • Product Name and Code • Stainless P trap waste connection specifying guide VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
CYLINDRICAL BUCKET TRAP 5.08Scan QR code TANKS & DRAINAGEto view onlinefeatures • Removable fine mesh filter Image shows Model OSCBT-V and • Heavy duty stainless steel Vinyl floor detail shown • Fully welded constructionbenefits • Easy to maintain • Models to suit vinyl and concrete floors • Ideal for processing plants, commercial kitchens are prep areasabout The BRITEX Stainless Steel Cylindrical Bucket Trap is ideally suited to processing plants, #OSCBT / CYLINDRICAL BUCKET TRAP commercial kitchens are food prep areas where waste water containing solids needs to be filtered prior to entering plumbing infrastructure. Manufactured from commercial grade 304 stainless steel, the Cylindrical Bucket Trap incorporates an easy to remove, 20mm fine mesh filter, a heavy gauge perforated top and can supplied with a top flange detail to suit vinyl or concrete floors.sample BRITEX grade 304 S.S. Cylindrical Bucket Trap - 330mm dia x 680mm high O/A with removable internal spec. filter, 50mm inlet and 100mm copper outlet. Top flange to suit concrete/vinyl floor - Product Code OSCBT text -X *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
CYLINDRICAL BUCKET TRAP 330 295 5.08 PRODUCT CODE 85° 200 Strainer bucket 80 supplied with hand OSCBT-C Below ground for concrete floor OSCBT-V Below ground for vinyl floor 50° 50680680 630 280 50 50 430 1 195 20 TANKS & DRAINAGE 330 200 Strainer bucket 230 295 supplied with handle 330 85° 295 80 680 680 50° 630 280 430 MODEL OSCBT-V Plan100 195 20330 #OSCBT / CYLINDRICAL BUCKET TRAP 230680295 200 MODEL OSCBT-V Rear Section 100 85° 80 33020 29595 Strainer bucket230 supplied with handle330 50°295 280 MODEL OSCBT-V Side Section specifying When specifying this options • Grade 304 or 316 stainless steel guide product please include: • Custom inlet position available • Custom sizes • Product Name and Code • 10mm silt grid bucket perforations • Product Dimensions • Top Flange detail (concrete/vinyl) VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
CYLINDRICAL PLASTER TRAP 5.09Scan QR code TANKS & DRAINAGEto view onlinefeatures • Removable, perforated settling bucket Image shows Model OSCPT-C and • Heavy duty stainless steel Concrete floor detail shown • Fully welded constructionbenefits • Easy to maintain • Models to suit vinyl and concrete floors • Above ground unit available • Perfect for medical facilities, schools and art roomsabout The BRITEX Stainless Steel Cylindrical Plaster Trap is ideally suited to Hospitals, Laboratories, #OSCPT / CYLINDRICAL PLASTER TRAP Medical Facilities and Art Rooms where solid particles need to be removed from waste water prior to entering plumbing infrastructure. Manufactured from commercial grade 304 stainless steel, a removable bucket captures solid particles such as paint, plaster, clay and dirt that settle at the bottom, whilst clean water exits via perforations in the top portion into the bucket. Collected waste is then periodically disposed by removing the settling bucket via the heavy duty grate atop the fixture. The BRITEX Stainless Steel Cylindrical Plaster Trap can be supplied with a top flange detail to suit vinyl or concrete floors or alternatively, if installing above ground, a removable solid lid.sample BRITEX grade 304 S.S. Cylindrical Plaster Trap - 330mm dia x 585mm high O/A with removable internal spec. silt bucket, 50mm inlet and 100mm copper outlet. Top flange to suit concrete/vinyl/above floor - Product text Code OSCPT-X *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
CYLINDRICAL PLASTER TRAP5.09 PRODUCT CODE 5mm S/S 1.2mm S/S OSCPT-C330 1.2mm S/S 276 Below ground for concrete floor (585 High) OSCPT-V85° Below ground for vinyl floor (585 High) OSCPT-A80 Above ground model -solid lid (485 High) 585 100 50 100 100 292 45° Copper ElbowTANKS & DRAINAGE Ø20 MODEL OSCPT-C Plan 330 276 5mm S/S 330 5mm S/S 276 85° 585 1.2mm S/S 50 585 50 85° 80 1.2mm S/S 1.2mm S/S 80 292 45° Copper Elbow#OSCPT / CYLINDRICAL PLASTER TRAP 1.2mm S/S 292 45° Copper Elbow Ø20 Ø20 MODEL OSCPT-C Side Elevation MODEL OSCPT-C Isometric View specifying When specifying this options • Grade 304 or 316 stainless steel guide product please include: • Custom inlet position available • Custom sizes • Product Name and Code • Product Dimensions • Top Flange detail (concrete/vinyl) VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
DRIP SINKS 5.10Scan QR code TANKS & DRAINAGEto view onlinefeatures • 1.2mm grade 316 or 304 S.S. • Sits flush in bench top and • Standard and custom sizes • Integral fixing studs • 50mm BSP connectionbenefitsabout BRITEX Stainless Steel Drip Sinks are fabricated from 1.2mm grade 316 acid resisting stainless steel and come in a satin finish. The sinks are fitted with a 50mm BSP stainless steel thread for waste connection and can be supplied in standard and custom sizes as required.sample BRITEX 1.2 grade 304/316 S.S. Drip Sink - 100mm Deep a 100mm I.D with 32mm flange. Complete with #LDS / DRIP SINKS spec. fixing studs and 50mm BSP thread connection - Product Code LDS text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.10 DRIP SINKS PRODUCT CODE LDS 164 100 32 150 100TANKS & DRAINAGE M6 Copper Stud 164150 100 32100 50mm TOE M6 Copper Stud 164 MODEL LDS Side Elevation 1500mm TOE 164 164 100 32 10 M6 Copper Stud MODEL LDS Plan 50mm TOE 164 10#LDS / DRIP SINKS MODEL LDS Isometric View specifying When specifying this options • Grade 304 or 316 S.S. guide product please include: • Custom dimensions • Custom designs - contact BRITEX • Product Name and Code • Product Dimensions • Product Features • Grade of Stainless Steel VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
CONICAL TUNDISHScan QR code 5.11 TANKS & DRAINAGEto view onlinefeatures • Easy to install • Custom sizes available and • 1.2mm grade 304 stainless steel • Corrosion resistant model (316 S.S.) • 95mm dia. outlet standardbenefits optionalabout The BRITEX Conical Tundish is manufactured from 1.2mm type 304 stainless steel. This tundish #D-TDF / CONICAL TUNDISH is commonly floor mounted but can also be elevated on a stand off pipe when being used with refrigeration services. It can be supplied in corrosion resistant grade 316 stainless steel where required and is primarily used as a discharge point for condensation and waste water from fixtures in commercial kitchens, apartment buildings and in conjunction with air conditioners and hot water services.sample BRITEX 1.2 grade 304 S.S. Conical Tundish - 260mm high overall. 150mm dia. entry with 95mm dia. waste spec. connection to suit 100mm pipe - Product Code D-TDF text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
TANKS & DRAINAGE 5.11 19655 165CONICAL TUNDISH 95PRODUCT CODE D-TDF 150 150 95 MODEL D-TDF Fro1n5t E0levation 95 150 MODEL D-TDF Plan#D-TDF / CONICAL TUNDISH specifying When specifying this options • Grade 304 or 316 S.S. guide product please include: • Custom dimensions • Custom designs - contact BRITEX • Product Name and Code • Product Dimensions • Grade of Stainless Steel VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
IN WALL TUNDISHScan QR code 5.12 TANKS & DRAINAGEto view online Model D-TDW-A Model D-TDW-Bfeatures • Standard and custom sizes available • Quality components for durability and • Removable inspection window • Manufactured from grade 304 or 316 • Purpose built to suit your specificbenefits stainless steel applicationabout The BRITEX In Wall Tundish is manufactured from 1.2mm satin finish stainless steel and comes #D-TDW / IN WALL TUNDISH complete with a removable inspection window allowing for visibility to detect blockages and ensure ease of cleaning. It is primarily used as a discharge point in refrigeration and air conditioning wastes for conditioning wastes for condensation and waste water. The In Wall Tundish is commonly used in hospitals, apartment buildings, medical centres and aged care facilities.sample BRITEX 1.2 grade 304 S.S. In Wall Tundish - 190mm wide x 130mm high x 68mm deep supplied complete spec. with removable inspection window and 40mm BSP connection - Product Code D-TDW text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
IN WALL TUNDISH 5.12 PRODUCT CODE D-TDW-A D-TDW-B6 centres 69 230 centres R10 66 230 centres1n9t0res 69 65 230 centres 190 66 61 190112 65 61 130 190 130Ø50 130150 196 centres 69 66112 190 R6105 61 112170 60 72 58 130 150 130216 7860 7078 95 R10 50 78 150 78 55 78 95 130 130 130 72 13058 70 50 TANKS & DRAINAGE 30 10 40 130 13505 40 150 50 10 60 72 58 70 55 95 23 78 50 130 50 1240 50 10 40 40 Ø50 12 Ø50 Ø38 Ø38 50 46 40 Ø38 Ø38 12 46 Ø50 Ø50 Ø38 46 MODEL D-TDW-A Side Elevation 150 View MODEL D-TDW-B Side ElØe3v8ation and Isometric View an1d50Iso75metric 75 24 24 Ø32 Ø25 30 23 12 Ø32 Ø25 75 150 10 30 24 24 Ø32 12150 12 10 66 23 24112 Ø25 30 12 10 66 12 166 12 12 166 249 24 66 249 170 166 216 249 MODEL D-TDW-A Plan MODEL D-TDW-B Plan 196 centres 69 230 centres 66 190 65 190 61 112 130 R10 #D-TDW / IN WALL TUNDISH 30 60 10 78 40 150 50 78 130 55 95 130 70 130 72 58 50 40 50 12 Ø50 Ø50 Ø38 Ø38 46 MODEL D-TDW-A Front Elevation MODEL D-TDW-B Front Elevation When specifying this23 12 150 12 prod1u5c0t please include:30 24 66 75 specifying 12 • Pro11d2 uct Name and Code options guide • Product Dimensions 24 • Product Features • Grade of Stainless Steel • Grade 304 or 316 ØS3.S2. Ø25 • Custom dimensions • Custom designs - contact BRITEX 10 170 166 216 249 VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
STAND-OFF PIPE TUNDISHScan QR code 5.13 TANKS & DRAINAGEto view onlinefeatures • 1.2mm grade 304 stainless steel • 38mm dia. outlet standard and • Optional tail length • Corrosion resistant model (316 S.S.) • Integral fixing stripbenefits • Easy to install optionalabout The Britex Stand Off Pipe Tundish is manufactured from 1.2mm type 304 satin finish stainless #D-TDP / STAND-OFF PIPE TUNDISH steel. This tundish can be supplied with either a standard 300mm long tail, or an extra long 1500mm long tail, which can then be cut down to suit as required. An integral fixing strip at the top of the tundish ensures it is easy to install and can be supplied in corrosion resistant grade 316 stainless steel where required. It is primarily used as a discharge point for condensation and waste water from fixtures such as hot water units, air conditioners and cool rooms.sample BRITEX 1.2 grade 304 S.S. Stand-Off Pipe Tundish - supplied complete with 300/1500mm long tail pipe and spec. integral fixing strip - Product Code D-TDP text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
5.13 STAND-OFF PIPE TUNDISH PRODUCT CODE D-TDP15 Stand-off pipe 1500mm long D-TDP3 Stand-off pipe 300mm longTANKS & DRAINAGE 75 100 100 100 22 75 100 100 22 75 75 75 75 MODEL D-TDP Plan Ø5 10022 100 100 122 122 Ø5 122 Ø5#D-TDP / STAND-OFF PIPE TUNDISH 300 / 1500 300 / 1500 100 300 / 1500 38 38 38 MODEL D-TDP Front Elevation MODEL D-TDP Side Elevation specifying When specifying this options • Grade 304 or 316 stainless steel guide product please include: • Custom dimensions • Custom designs - contact BRITEX • Product Name and Code • Product Dimensions • Grade of Stainless Steel VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
GRANDEUR HAND WASH BASIN 6.01 HAND BASINSScan QR codeto view online Image shows Model HBGU-RF-TW-9201 Grandeur Basin, Rear Fixed with Deluxe Timed Flow Pillar Tapfeatures • Optimal vandal resistance • Concealed fixings and • Fully welded, seamless construction • Front and rear fixed models • Completely concealed plumbing • Choice of tapware stylesbenefits • P trap installation • 7 litre bowl capacity • No sharp edges or corners • 1, 2 or 3 tap holes • Grade 304 satin S.S. • Optional anti-ligature waste • Stylish, modern design • Suits detention projects, holding • 40mm waste outlet cells, public amenities and barsabout The BRITEX Stainless Steel Grandeur Basin is a stylish looking fixture that incorporates prison #HBGU / GRANDEUR HAND WASH BASIN - grade vandal resistance. Key to its design is a fully welded, radiused front edge that conceals a solid 25mm stainless steel bar within - to ensure maximum resistance to any applied forces. A rounded profile above and below the basin also ensures there are no ligature points and all fixing points are concealed. Plumbing connections are secure within the stainless steel shroud that can incorporate an access panel if fixing from the front and an anti-ligature security waste is optional. Can be supplied with anti-vandal timed flow pillar tap, sensor tap or security tapware for maximum vandal resistance.sample BRITEX S.S. Grandeur Hand Wash Basin - 450L x 400W x 300D O/A. Front/Rear fixed model. Complete spec. with concealed 25mm S.S. reinforcement bar and rolled safety fascia, 40mm security/polypropylene waste text outlet and XXXXX tapware - Product Code HBGU-XX-TW-XXXX NB Please refer to reverse page for tapware and basin options *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
Ø GRANDEUR HAND WASH BASIN6.01 PRODUCT CODE HBGU Basin only HOW TO SPECIFY: Grandeur Hand Wash Basin Sample Specification Code AB C HBGU - RF - TW-9201 = Grandeur Hand Basin, Rear Fixed with Deluxe Timed Flow Pillar TapHAND BASINS Specification Key MODEL HBGU Plan A = Product Code C = Tapware - if required (see below for suggested B = Fixing Method RF : Rear Fixed tapware options) (no access panel) FF : Front Fixed (left hand access panel) Ø Suggested Tapware Options: (see Tapware Section: 11 for complete range of options) TW-SEC-01 TW-SEC-02 Security Tap Set Security Tap Set (Cold Only) (Hot & Cold)#HBGU / GRANDEUR HAND WASH BASIN TW-9201 TW-9101 MODEL HBGU Side Elevation Deluxe Timed Flow Eco Timed Flow Pillar Tap Pillar Tap Ø TW-9110 TW-MIX-01 Euro Basin Mounted Basin Mounted Sensor Tap Flick Mixer MODEL HBGU Rear Elevation specifying When specifying this options • Tap holes guide product please include: • Tapware - see Tapware Section: 11 • Anti-ligature security waste • Product Name and Code • Right/left hand access panel • Product Dimensions • Tapware details (if required) • Fixing Method - Front or Rear • Waste Type - Standard or Security B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
SECURITY HAND WASH BASIN 6.02 HAND BASINSScan QR codeto view online Image shows Model SHB-RF-TW-SEC-01 Security Hand Wash Basin, Rear Fixed with Security Tap Setfeatures • Highly vandal resistant • Stylish, modern design and • Fully welded, seamless construction • 40mm waste outlet • P trap installation • 1, 2 or 3 tap holesbenefits • Completely concealed plumbing • Choice of tapware styles • No sharp edges or corners • Front and rear fixed models • Grade 304 S.S. • Optional anti-ligature waste • 11 litre bowl capacity • Suits detention projects, holding • Recessed area around bowl cells, public amenities and barsabout The BRITEX Stainless Steel Security Hand Wash Basin combines maximum security vandal #SHB / SECURITY HAND WASH BASIN resistance with quality workmanship and style. Key to its design is a fully welded, radiused front edge that conceals a solid 25mm stainless steel bar within to provide additional safety and ensure maximum resistance to any applied forces. A rounded profile above and below the basin also ensures there are no ligature points and all fixing points are concealed. Plumbing connections are secure within the stainless steel shroud that can incorporate an access panel if fixing from the front and an anti-ligature security waste is optional. Can be supplied with anti-vandal timed flow pillar tap, sensor tap or security tapware for maximum vandal resistance.sample BRITEX S.S. Security Hand Wash Basin - 510L x 415W x 355D. 11 Litre bowl capacity. Front/Rear fixed model. spec. Complete with concealed 25mm S.S. reinforcement bar and rolled safety fascia, 40mm security/polypropylene text waste outlet and XXXX tapware - Product Code SHB-XX-TW-XXXX NB Please refer to reverse page for tapware and basin options *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
SECURITY HAND WASH BASIN 192 2056.02 PRODUCT CODE 510 SHB Basin only HOW TO SPECIFY: Security Hand Wash Basin 510 Sample Specification Code MODEL SHB Plan415 205 AB C SHB - RF - TW-SEC-01 = Security Hand Wash Basin, Rear Fixed with Security Tap Set (Cold only)HAND BASINS Specification Key C = Tapware - if required (see below for suggested A = Product Code tapware options) B = Fixing Method RF : Rear Fixed (no access panel) FF : Front Fixed (left hand access panel) Suggested Tapware Options: (see Tapware Section: 11 for complete range of options) TW-SEC-01 TW-SEC-02 Security Tap Set Security Tap Set (Cold Only) (Hot & Cold) MODEL SHB Side Elevation TW-SEC-06 TW-9101 510 4 Security 3/4 Turn Eco Timed Flow 380 Basin Set (Hot & Cold) Pillar Tap 192 205#SHB / SECURITY HAND WASH BASIN 39 Ø19 355 276 215510 TW-9201 TW-9110 Deluxe Timed Flow Euro Basin Mounted Pillar Tap Sensor Tap MODEL SHB Rear Elevation specifying When specifying this options415 510 guide product please include: 205 • Tap holes • Product Name and Code • Tapware - see Tapware Section: 11 • Product Dimensions • Anti-ligature security waste • Tapware details (if required) • Right/left hand access panel • Fixing Method - Front or Rear • Waste Type - Standard or Security B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
OVAL SECURITY BASIN 6.03 HAND BASINSScan QR codeto view onlinefeatures • Radius edges. No sharp corners Image shows Model SPBO-RF-TW-SEC-01 and • Ligature resistant profile Oval Security Basin, Rear Fixed with Security Tap Set • Prison grade vandal resistancebenefits • All plumbing connections concealed • P trap installation • Grade 304 satin S.S. • Reinforced bowl rim • Front/rear fixed models • Choice of tapware styles • 40mm waste outlet • 1,2 or 3 tapholes • Optional anti-ligature waste • Suits detention projects, holding cells, public amenities and barsabout The BRITEX Stainless Steel Oval Security Basin combines maximum security vandal resistance #SPBO / OVAL SECURITY BASIN with the highest quality workmanship and style. Key to its design is a fully welded, radiused front edge that conceals a solid 25mm stainless steel bar within to ensure maximum resistance to any applied forces. A rounded profile above and below the basin also ensures there are no ligature points and all fixing points are concealed. Plumbing connections are secure within the stainless steel shroud that can incorporate an access panel if fixing from the front and an anti- ligature security waste is optional. Can be supplied with anti-vandal timed flow pillar tap or security tapware for maximum vandal resistance.sample BRITEX S.S. Oval Security Basin - 450L x 383W x 880H. Front/Rear fixed model. Complete with concealed spec. 25mm S.S. reinforcement bar and rolled safety fascia, tapered anti-ligature profile, 40mm security/poly- text propylene waste outlet and XXXX tapware - Product Code SPBO-XX-TW-XXXX NB Please refer to reverse page for tapware and basin options *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
OVAL SECURITY BASIN Ø6.03 PRODUCT CODE SPBO Basin only HOW TO SPECIFY: Oval Security Basin Sample Specification Code AB C SPBO - RF - TW-SEC-01 = Oval Security Basin, Rear Fixed with Security Tap Set (Cold)HAND BASINS Specification Key C = Tapware - if required (see below for suggested A = Product Code tapware options) B = Fixing Method Ø RF : Rear Fixed (no access panel) FF : Front Fixed (left hand access panel) Suggested Tapware Options: (see Tapware Section: 11 for complete range of options) MODEL SPBO Side Elevation and Plan TW-SEC-01 TW-SEC-02 Security Tap Set Security Tap Set (Cold Only) (Hot & Cold) TW-SEC-06 TW-9101 Security 3/4 Turn Eco Timed Flow Basin Set (Hot & Cold) Pillar Tap#SPBO / OVAL SECURITY BASIN TW-9201 TW-9110 Ø Deluxe Timed Flow Euro Basin Mounted Pillar Tap Sensor Tap MODEL SPBO Rear Elevation specifying When specifying this options • Tap holes guide product please include: • Tapware - see Tapware Section: 11 • Anti-ligature security waste • Product Name and Code • Right/left hand access panel • Product Dimensions • Tapware details (if required) • Fixing Method - Front or Rear • Waste Type - Standard or Security B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737
VANDAL RESISTANT WASH BASIN 6.04 HAND BASINSScan QR codeto view online Image shows Model HBVR-TW-9101 Vandal Resistant Basin with Eco Timed Flow Pillar Tapfeatures • Value for money vandal resistance • Choice of tapware styles and • Shroud conceals plumbing connections • 6 litre bowl capacity • Concealed access panel • 1 or 2 tap holesbenefits • Hidden wall bracket • Suits public amenities, schools, • 40mm waste outlet supplied • P trap installation sporting clubs and barsabout The BRITEX Vandal Resistant Wash Basin provides great value for money in projects that #HBVR / VANDAL RESISTANT WASH BASIN require a hand wash basin highly resistant to vandalism. Easily installed and fabricated from heavy duty stainless steel, all plumbing connections are housed within the carcass of the basin preventing them from being broken or tampered with. Maintenance can be carried out by removing the access panel concealed underneath the basin. Can be supplied with anti-vandal timed flow pillar tap, sensor tap or security tapware for maximum vandal resistance.sample BRITEX S.S. Vandal Resistant Wash Basin - 360L x 365W x 350D O/A. Supplied complete with concealed spec. access hatch, mounting bracket, 40mm waste outlet and XXXX tapware - Product Code HBVR-TW-XXXX text NB Please refer to reverse page for tapware and basin options *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737
Search
Read the Text Version
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
- 251
- 252
- 253
- 254
- 255
- 256
- 257
- 258
- 259
- 260
- 261
- 262
- 263
- 264
- 265
- 266
- 267
- 268
- 269
- 270
- 271
- 272
- 273
- 274
- 275
- 276
- 277
- 278
- 279
- 280
- 281
- 282
- 283
- 284
- 285
- 286
- 287
- 288
- 289
- 290
- 291
- 292
- 293
- 294
- 295
- 296
- 297
- 298
- 299
- 300
- 301
- 302
- 303
- 304
- 305
- 306
- 307
- 308
- 309
- 310
- 311
- 312
- 313
- 314
- 315
- 316
- 317
- 318
- 319
- 320
- 321
- 322
- 323
- 324
- 325
- 326
- 327
- 328
- 329
- 330
- 331
- 332
- 333
- 334
- 335
- 336
- 337
- 338
- 339
- 340
- 341
- 342
- 343
- 344
- 345
- 346
- 347
