Britex Catalogue - Full

350 36 320 195 To wast 350 VANDAL RESISTANT WASH BASIN6.04 PRODUCT CODE 333 185 360 365365 HBVR Basin only HOW TO SPECIFY: Vandal Resistant Wash Basin Sample Specification Code 365 Tra TrapTrnaopt n AB Ø300 Ø40mm Waste HBVR - TW-9101 = Vandal Resistant Wash Basin with Eco Timed Flow Pillar Tap MODEL HBVR PlanHAND BASINS Specification Key B = Tapware - if required A = Product Code (see below for suggested tapware options) 360360 220220 OffsOeftffsiextinfgixing Suggested Tapware Options: bracbkreatcket 350 50 (see Tapware Section: 11 for complete range of options) 350 50 36 320 36 320 195 To19w5aste To waste 350 350 TW-9201 TW-9101 333333 185 185 Deluxe Timed Flow Eco Timed Flow 360360 Pillar Tap Pillar Tap 360 365 220 Offset fixing#HBVR / VANDAL RESISTANT WASH BASIN bracket 350 50 TW-9110 TW-9103 MODEL HBVR Rear and Side Elevation Euro Basin Mounted Timed Flow Lever Sensor Tap Pillar Tap 350 36 365 320 365Ø40Øm4m0mWmasWteaste Ø300Ø300 195 To waste 333 185 TW3-6S0EC-01 TW-MIX-01 Security Tap Set Basin Mounted (Cold Only) Flick Mixer Base Panel screw-fixed from underneath with M4 Button Head Allen Screw 365 Trap not supplied Ø300 Ø40mm Waste MODEL HBVR Isometric View (Rear) specifying When specifying this options • Tap holes guide product please include: • Tapware - see Tapware Section: 11 • Splashback Panel - Up to 500mm High • Product Name and Code • Shroud to floor - see : p 6.03 • Product Dimensions • Tapware details (if required) B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

VANDAL RESISTANT CORNER HAND BASIN 6.05Image shows Model HBVRC-W-TW-9101 HAND BASINS Wall Mounted Vandal Resistant Basin with Eco Timed Flow Pillar TapScan QR codeto view online Image shows Model HBVRC-FF-TW-9101 Floor Mounted Vandal Resistant Basin, Front Fixed with Eco Timed Flow Pillar Tapfeatures • Highly vandal resistant • Choice of tapware styles and • Pedestal and Wall Mounted models • Concealed fixings • Great space-saving design • 40mm waste outlet suppliedbenefits • Shroud conceals plumbing connections • Suits public amenities, schools, • Front fix model includes access panel sporting clubs and bars #HBVRC / VANDAL RESISTANT CORNER HAND BASINabout The BRITEX Stainless Steel Vandal Resistant Corner Hand Basin is highly resistant to vandalism and is particularly suited to washrooms with limited space. Easily installed and fabricated from heavy duty stainless steel, all plumbing connections are housed within the carcass of the basin preventing them from being broken or tampered with. Available in both Pedestal (S trap) and Wall Mounted (P trap) configurations, front-fixed basins are supplied with an access panel, rear-fixed models without. Tap options include an anti-vandal timed flow pillar tap, sensor tap or dome shaped security tapware for maximum vandal resistance.sample HBVRC-W - Wall Mounted spec. text BRITEX S.S. Vandal Resistant Corner Hand Basin - 360L x 360W x 350H. Wall mounted, front fixed, supplied complete with, 40mm waste outlet, concealed mounting bracket and XXXX tapware - Product Code HBVRC- W-TW-XXXX HBVRC-F - Floor Mounted BRITEX S.S. Vandal Resistant Corner Hand Basin - 360L x 360W x 850H. Floor mounted. Front/Rear fixed model. Supplied complete with 40mm waste outlet, concealed mounting bracket and XXXX tapware - Product Code HBVRC-F-XX-TW-XXXX *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

6.05 VANDAL RESISTANT CORNER BASIN Ø PRODUCT CODE HBVRC-W Wall Mounted HBVRC-F Floor MountedHAND BASINS HOW TO SPECIFY: Oval Security Basin Ø10 Ø Sample Specification Code Ø A BC MODEL HBVRC-F Plan and Rear Elevation HBVRC-F - RF - TW-9201 = Vandal Resistant Corner Basin Floor Mounted, Rear Fixed with Deluxe Timed Flow Pillar Tap Specification Key C = Tapware - if required (see below for suggested A = Product Code HBVRC-W : Wall Mounted tapware options) HBVRC-F : Floor Mounted Ø B = Fixing Method (Floor Mount Model only) RF : Rear Fixed (no access panel) FF : Front Fixed (left hand access panel) Suggested Tapware Options: (see Tapware Section: 11 for complete range of options) Ø TW-9101 Ø Eco Timed Flow TW-9201 Pillar Tap MODEL HBVRC-F RHS and LHS Elevation Deluxe Timed Flow Pillar Tap#HBVRC / VANDAL RESISTANT CORNER HAND BASIN Ø10 Ø10 Ø TW-9110 TW-9103Ø Ø Euro Basin Mounted Timed Flow Lever Ø Sensor Tap Pillar Tap Rear Elevation RHS Elevation TW-SEC-01 Ø Ø Ø Security Tap Set Ø (Cold Only) TW-MIX-01 Basin Mounted Flick Mixer Plan LHS Elevation MODEL HBVRC-W Wall Mounted specifying When specifying this options • Tap holes guide product please include: • Tapware - see Tapware Section: 11 Ø • Splashback Panel - Up to 500mm High • Product Name and Code • Right/left hand access panel • Product Dimensions • Tapware details (if requØ ired) • Fixing Method - Front or Rear B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

DISABLED HAND BASIN 6.06 AS-1428 HAND BASINSCOMPLIANTScan QR codeto view online Image shows Model HBDA-TW-9103 Disabled Hand Basin with Timed Flow Lever Pillar Tapfeatures • Compliant with disability code - AS1428 • Stylish, modern design and • Optimal vandal resistance • Vandal resistant access panel • Fully welded, seamless construction • Choice of disabled compliantbenefits • Hidden 25mm bar in fascia for tapware - AS1428 reinforcement & safety • 7 litre bowl capacity • Completely concealed plumbing • Optional CoastGuard™ coating • P trap installation • Suits public amenities, schools, • 40mm waste outlet supplied sporting clubs and barsabout The BRITEX Stainless Steel Disabled Hand Basin is a vandal resistant fixture that is designed #HBDA / DISABLED HAND BASIN to conform to Australian Standards for disability access – AS1428 - and is ideal for use in public amenities, night clubs and pavilions. Fabricated from heavy duty stainless steel, it incorporates a hidden 25mm bar into the fascia for additional reinforcement and added safety, 40mm waste outlet and can be supplied with fully certified disabled compliant tapware. Britex CoastGuard™ - a clear coating option that protects against the onset of tea staining (surface discolouration) caused by salt air - is recommended for installations near the ocean.sample BRITEX S.S. Disabled Hand Basin - 440 x 470 x 380D O/A. Supplied complete with XXXX tapware, concealed spec. 25mm S.S. reinforcement bar and rolled safety fascia, access panel, mounting bracket and 40mm waste text outlet. AS1428 compliant - Product Code HBDA-TW-XXXX NB Please refer to reverse page for tapware and basin options *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

DISABLED HAND BASIN6.06 HBDAPRODUCT COØD25E 440 155 140 345 155 140 35 48 Basin only - no tapware 35 48 440 380 380 135 Ø25 345 135350 HOW TO SPECIFY: Disabled Hand Basin 350 50Sample SpecØif1i8Øc9ation Code31 31 AB HAND BASINS 50 Ø9 Ø1H8 BDA - TW-9103 = Disabled Hand Basin with Timed Flow Lever Pillar Tap Specification Key B = Tapware - if required MODEL HBDA Side Elevation A = Product Code (see below for suggested 440 tapware options) Ø25 345 Suggested Tapware Options: 155 140 155 140 35 35 (see Tapware Section: 11 for complete range of options) 350 48 48 380 440 135 345 50 TW-MIX-L Ø25 TW-9103 Fixed Basin Mounted 50 Ø9 Timed Flow Lever Lever Mixer Pillar Tap Ø18 350 31 380 50 135 50 MODØ1E8ØL9 HBDA Rear Elevation TW-9110 48 440 Euro Basin Mounted 31 Ø25 345 Sensor Tap 380#HBDA / DISABLED HAND BASIN 135 31 155 140 35 350 50 50 Ø9 Ø18 MODEL HBDA Front Elevation MODEL HBDA Plan specifying When specifying this options • Tap holes guide product please include: • Britex CoastGuard™ coating • Tapware - see Tapware Section: 11 • Product Name and Code • Integral Splashback - up to 300mm high • Product Dimensions • Tapware details (if required) B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

PEDESTAL SECURITY BASIN 6.07 HAND BASINSScan QR codeto view online Image shows Model SPB-RF-TW-SEC-01-T Pedestal Security Basin Rear Fixed with Security Tap Set and Toilet Roll Holder (optional)features • Shroud extends to the floor • P or S trap installation and • 6 litre bowl capacity • Optional toilet roll holder • All plumbing connections concealed • Choice of tapware stylesbenefits • Grade 304 satin S.S. • 1, 2 or 3 tap holes • Optional access panel (if front fixed) • Optional anti-ligature waste • Fixes to floor and rear wall • Suits detention projects, holding • 40mm waste outlet supplied cells, public amenities and barsabout The BRITEX Stainless Steel Pedestal Security Basin is a popular vandal resistant fixture #SPB / PEDESTAL SECURITY BASIN for holding cells, public toilets and train stations. Shrouded all the way to the ground, it can be trapped through the floor, eliminating the need to penetrate the rear wall. Compact in size and taking up little space in smaller rooms, it is fixed both at the rear of the basin and at the base. Options include an integral toilet roll holder, security waste and access panels if fixing from the front. Can be supplied with fully certified timed flow pillar taps or security tapware if required. Security waste is optional.sample BRITEX S.S. Pedestal Security Basin. 360L x 420W x 820H. Front/Rear fixed model, supplied complete with spec. 40mm security/polypropylene waste outlet, integrated toilet roll holder and XXXX tapware - Product Code text SPB-XX-TW-XXXX-X NB Please refer to reverse page for tapware and basin options *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

PEDESTAL SECURITY BASIN Ø11 Ø6.07 PRODUCT CODE Ø11 Ø SPB Basin only Ø11 HOW TO SPECIFY: Pedestal Security Basin Sample Specification Code 420 360 147 213 35 303 AB CD 240 Ø300 SPB - RF - TW-SEC-01 - T 40mm Waste = Pedestal Security Basin, Rear Fixed with Security Tap Set (Cold) and Toilet Roll HolderHAND BASINS Specification Key C = Tapware - if required (see below for A = Product Code tapware options) B = Fixing Method D = Toilet Roll Holder (opt.) RF : Rear Fixed T : Toilet Roll Holder (no access panel) N : No Toilet Roll Holder FF : Front Fixed (left hand access panel) Suggested Tapware Options: 360 303 (see Tapware Section: 11 for complete range of options) 420 147 213 35 MODEL SPB Rear Elevation and Plan 240 TW-SEC-01 TW-SEC-02 Ø300 Security Tap Set Security Tap Set (Cold Only) (Hot & Cold) 40mm Waste TW-SEC-06 TW-MIX-01 Security 3/4 Turn Basin Mounted Basin Set (Hot & Cold) Flick Mixer#SPB / PEDESTAL SECURITY BASIN TW-9101 TW-9202 Eco Timed Flow Pillar Tap Deluxe Timed Flo36w0 420Mixer Tap 303 147 213 35 MODEL SPB Side Elevation 240 When specifying this Ø300 • Tap holes product please include: • Anti-ligature security waste specifying 40mm options • Right/left hand access panel guide • Product Name and Code Waste • Splashback Panel - Up to 500mm High • Product Dimensions • Toilet roll holder • Tapware details (if required) • Fixing Method - Front or Rear • Waste Type - Standard or Security B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737







































VANITY INSET HAND BASINHAND BASINS 6.18 PRODUCT CODE HBVI (Basin only) HOW TO SPECIFY: Vanity Inset Hand Basin Sample Specification Code AB HBVI - TW-9201 = Multi Vanity Inset Hand Basin with Deluxe Timed Flow Pillar Tap Specification Key MODEL HBVI Plan A = Product Code B = Tapware (if required) (see below for suggested tapware options) Suggested Tapware Options: (see Tapware Section: 11 for complete range of options) TW-9201 TW-9101 Deluxe Timed Flow Eco Timed Flow Pillar Tap Pillar Tap MODEL HBVI Side Elevation TW-9110 TW-9103 Euro Basin Mounted Timed Flow Lever Sensor Tap Pillar Tap#HBVI / VANITY INSET HAND BASIN TW-MIX-01 Basin Mounted Flick Mixer MODEL HBVI Front Elevation When specifying this • Tap holes to suit specified tapware product please include: specifying options guide • Product Name and Code • Product Dimensions • Tapware details (if required) VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

INSET ROUND BASIN 6.19 HAND BASINSScan QR codeto view onlinefeatures • Three standard sizes • 40mm waste outlet and • Flush mounts into bench top • Suits top or under mounting • Grade 304 stainless steel • Suits domestic and commercialbenefits • Satin finish applicationsabout BRITEX Stainless Steel Inset Round Basins are manufactured from commercial grade 304 #HBH / INSET ROUND BASIN stainless steel and have a satin finish. Stainless steel inset basins are suitable for both domestic and commercial applications and come in three standard sizes, complete with waste outlet. If desired, basins can be also be undermounted.sample BRITEX S.S. Inset Round Basin - XXXmm I.D. x XXXmm Deep. Satin finish grade 304 stainless steel supplied spec. complete with 40mm waste outlet - Product Code HBHX text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

HAND BASINS 6.19 INSET ROUND BASIN PRODUCT CODE HBH1 Ø340 O/A x 170mmD HBH2 Ø336 O/A x 115mmD HBH3 Ø290 O/A x 100mmD HBH - dimensions HBH1 A B C HBH2 Ø340 Ø300 170 HBH3 Ø336 Ø300 115 Ø290 Ø250 100 MODEL HBH Front Elevation MODEL HBH Plan#HBH / INSET ROUND BASIN specifying When specifying this guide product please include: • Product Name and Code • Product Dimensions • Top or Under Mounting VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

REGAL BASIN 6.20 HAND BASINSScan QR codeto view onlinefeatures • Flush mounts into bench top Image shows model HBRE-TW-9201 and • Grade 304 stainless steel Regal Basin with Deluxe Timed Flow Pillar Tap • Suitable for domestic and commercialbenefits • Extended rear hob with tap hole • Satin finish • Won’t chip or break • 40mm waste outlet • Supplied with fixing clips • Choice of tapware models • 35mm tap holeabout The BRITEX Stainless Steel Regal Basin is manufactured from commercial grade 304 S.S and has a satin finish. Suitable for both domestic and commercial applications it comes supplied with fixing clips for installing in joinery benchtops. An extended rear hob includes #HBRE / REGAL BASIN a 35mm tap hole suitable for a range of tap styles. Supplied complete with 40mm waste outlet.sample BRITEX S.S. Regal Hand Basin - 520L x 430W x 150D. Satin finish stainless steel supplied complete with spec. 35mm tap hole, 40mm waste outlet and XXXX tapware - Product Code HBRE-TW-XXXX text NB Please refer to reverse page for tapware and basin options *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

6.20 REGAL BASIN PRODUCT CODE Ø HBRE (Basin only) MODEL HBRE Plan HOW TO SPECIFY: Regal Basin Sample Specification Code AB HBRE - TW-9201 = Regal Basin with Deluxe Timed Flow Pillar TapHAND BASINS Specification Key B = Tapware (if required) A = Product Code (see below for suggested tapware options) Suggested Tapware Options: (see Tapware Section: 11 for complete range of options) TW-9201 TW-9101 Deluxe Timed Flow Eco Timed Flow Pillar Tap Pillar Tap TW-9110 MODEL HBRE Side Elevation Euro Basin Mounted Sensor Tap Ø TW-MIX-01 Basin Mounted Flick Mixer#HBRE / REGAL BASIN TW-MIX-14 TW-MIX-15 Basin Mounted Mixer Basin Mounted Mixer MODEL HBRE Front Elevation Ø specifying When specifying this guide product please include: • Product Name and Code • Product Dimensions • Tapware details (if required) B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

KNEE OPERATED HAND BASIN 6.21 HAND BASINSScan QR codeto view online Image shows Knee Operated Hand Basin with Low Level Spoutfeatures • Hands-free activation • Supplied pre-plumbed ready to install and • Prevents cross-contamination • Includes pressure limiting valve • Complies with food prep. standards • Grade 304 stainless steelbenefits • 11 litre bowl capacity • 40mm waste outlet supplied • Heavy duty operating valve • Concealed wall brackets • No electrical connections • 50mm blade upstand to rear • Chamfered corners for added safety • Choice of low level or goose neck spoutabout The BRITEX Stainless Steel Knee Operated Hand Basin is primarily used in commercial food #HBKO / KNEE OPERATED HAND BASIN handling areas and incorporates a generous 11 litre bowl. The tap is activated by leaning against the front push panel, eliminating the need for electronic / mains powered tapware in areas where avoiding cross-contamination is paramount. Supplied pre-plumbed and easy to install, the Knee Operated Basin is extremely heavy duty and comes complete with pressure limiting valve, 40mm waste outlet and choice of low-level or goose neck type spout.sample BRITEX S.S. Knee Operated Hand Basin - 500L x 425W x 250H O/A. 11 litre bowl capacity. Supplied spec. pre-plumbed with goose neck/low-level type spout, front push panel, pressure limiting valve, mounting text bracket, 40mm waste outlet and tempering valve - Product Code HBKO *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

6.21 KNEE OPERATED HAND BASIN PRODUCT CODE HBKO Offset fixing 500 37 Ref 500 99 37 Ref 290 99 36 290 36 bracket Offset fixing 360 ø6 brack3e6t 0 ø6 ø6HAND BASINS 250 50 250 50 180 140 140 250 15 15 180 250 440 440 242 242 Offset fixing Suggested mounting h5e0ig0ht: 850-900mm AFL 37 Ref 500 99 290 36 bracket 500 360 MODEL HBKO Front Elevation MODEL HBKO Section 250 50 425 140 425 1540mm Waste 180 250 40mm Waste 440 242 500#HBKO / KNEE OPERATED HAND BASIN 40mm Waste 425 MODEL HBKO Plan specifying When specifying this options • Splashback Panel - Up to 500mm High guide product please include: • Low level or goose neck spout • Tempering valve • Product Name and Code • Product Dimensions • Spout Type B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

COMPACT KNEE OPERATED HAND BASIN 6.22 HAND BASINSScan QR codeto view online Image shows Compact Knee Operated Basin with Low Level Spoutfeatures • Hands-free activation • Supplied pre-plumbed ready to install and • Prevents cross-contamination • Grade 304 S.S. • Compact space-saving size • 40mm waste outlet suppliedbenefits • 8 litre bowl capacity • Concealed wall brackets • Heavy duty operating valve • 30mm blade upstand to rear • No electrical connections • Low level or goose neck spout option #HBKOC / COMPACT KNEE OPERATED HAND BASIN • Includes pressure limiting valve • Radius basin corners for added safetyabout The BRITEX Stainless Steel Compact Knee Operated Hand Basin is a compact sized version of the popular, commercial sized Knee Operated Basin. Activation of the tap is done by leaning against the front push panel, eliminating the need for electronic / mains powered tapware in areas where avoiding cross-contamination is paramount. Supplied pre-plumbed and easy to install, the Compact Knee Operated Basin comes complete with pressure limiting valve, 40mm waste outlet and choice of low-level or goose neck type spout.sample BRITEX S.S. Compact Knee Operated Hand Basin - 410x330x245H O/A. 8 litre bowl capacity. Supplied pre- spec. plumbed with goose neck/low-level type spout, front push panel, pressure limiting valve, mounting bracket, text 40mm waste outlet and tempering valve - Product Code HBKOC *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

6.22 COMPACT KNEE OPERATED HAND BASIN PRODUCT CODE HBKOC 33 ref 410 410 40 33 ref 330 330 260 40 260 135 27 135 230 27 230 27HAND BASINS 33 ref 335 40mm Was3te35 14040mm Waste 1/2\" BSP14in0let 1/2\" BSP inlet 330 40 8 8 Suggested mounting 4he10ight: 850-900mm AFL 410 33 ref 410 410 410 330 343130030 330 40 260 260 MODEL HBKOC Front Elevation MODEL HBKOC Section 135 330 135 230 230 27 8 335 40mm Waste 140 1/2\" BSP inlet 40mm Waste 140 1/2\" BSP inlet 8 335 410 410 410 330 330 410#HBKOC / COMPACT KNEE OPERATED HAND BASIN 330 330 MODEL HBKOC Plan MODEL HBKOC Isometric View specifying When specifying this options • Splashback Panel - Up to 500mm High guide product please include: • Low level or goose neck spout • Tempering valve • Product Name and Code • Product Dimensions • Spout Type VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

FLOATING WAND SQUARE HAND BASIN 6.23 HAND BASINSScan QR codeto view online Image shows Model HBFWS Floating Wand Square Basin with Gooseneck Spoutfeatures • Hands-free activation • Includes pressure limiting valve and • Prevents cross-contamination • Grade 304 S.S. • Complies with food prep standards • 40mm waste outlet suppliedbenefits • 11 litre bowl capacity • Concealed wall brackets • Activated by user leaning against wand • 50mm blade upstand to rear • No electrical connections • Low level or goose neck spout option #HBFWS / FLOTAING WAND SQUARE HAND BASIN • Supplied pre-plumbed ready to install • Chamfered corners for added safetyabout The BRITEX Stainless Steel Square Floating Wand Basin is primarily used in commercial food handling areas and incorporates a generous 11 litre bowl. Activation of the tap is done by leaning against the wand protruding from the basin shroud, eliminating the need for electronic /mains powered tapware in areas where avoiding cross-contamination is paramount. Supplied pre-plumbed and easy to install, the Square Floating Wand Basin comes complete with pressure limiting valve, 40mm waste outlet and choice of low-level or goose neck type spout.sample BRITEX S.S. Floating Wand Hand Basin Square - 500 x 425 x 230 H O/A. 11 litre bowl capacity. Supplied pre- spec. plumbed with goose neck/low-level type spout, activation wand, pressure limiting valve, mounting bracket, text 40mm waste outlet and tempering valve - Product Code HBFWS *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

6.23 FLOATING WAND SQUARE HAND BASIN PRODUCT CODE HBFWS500 500 425 360 Offset 10 mounting stripHAND BASINS 140 35 Ref 570 235 1/2\" Connection to 40mm Waste 440 Ø pressure reducer 8 MODEL HBFWS Front Elevation Suggested mounting height: 850-900mm AFL500 Ø MODEL HBFWS Side Elevation Ø#HBFWS / FLOATING WAND SQUARE HAND BASIN Ø MODEL HBFWS Plan MODEL HBFWS Rear Elevation specifying When specifying this options • Splashback Panel - Up to 500mm High guide product please include: • Low level or goose neck spout • Tempering valve • Product Name and Code • Product Dimensions • Spout Type VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

FLOATING WAND ROUND HAND BASIN 6.24 HAND BASINSScan QR codeto view online Image shows Floating Wand Round Basin with Low Level Spoutfeatures • Hands-free activation • Includes pressure limiting valve and • Prevents cross-contamination • Grade 304 S.S. • 8 litre bowl capacity • 40mm waste outlet suppliedbenefits • Compact space-saving size • Concealed wall brackets • Activated by user leaning against wand • 50mm blade upstand to rear • No electrical connections • Low level or goose neck spout option #HBFWR / FLOATING WAND ROUND HAND BASIN • Supplied pre-plumbed ready to installabout The BRITEX Stainless Steel Round Floating Wand Basin is a compact sized, fully shrouded hands-free wash basin. Activation of the tap is done by leaning against the wand protruding from the basin shroud, eliminating the need for electronic / mains powered tapware in areas where avoiding cross-contamination is paramount. Supplied pre-plumbed and easy to install, the Round Floating Wand Basin comes complete with pressure limiting valve, 40mm waste outlet and choice of low-level or goose neck type spout.sample BRITEX S.S. Floating Wand Hand Basin Round - 360L x 365W x 235H O/A. 8 litre bowl capacity. Supplied spec. pre-plumbed with goose neck/low-level type spout, activation wand, pressure limiting valve, mounting text bracket, 40mm waste outlet and tempering valve - Product Code HBFWR *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

6.24 FLOATING WAND ROUNDHAND BASINS HAND BASIN PRODUCT CODE HBFWR MODEL HBFWR Plan Suggested mounting height: 850-900mm AFL MODEL HBFWR Side Elevation#HBFWR / FLOATING WAND ROUND HAND BASIN MODEL HBFWR Rear Elevation specifying When specifying this options • Splashback Panel - Up to 500mm High guide product please include: • Low level or goose neck spout • Tempering valve • Product Name and Code • Product Dimensions • Spout Type VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

MULTI KNEE OPERATED BASIN 6.25 HAND BASINSScan QR codeto view online Image shows Model HBMKO-1800-3-L 1800mm Multi Knee Operated Basin with 3 Bowls and Low Level Spoutsfeatures • Made to custom lengths • Includes pressure limiting valve and • Incorporates multiple wash stations • Grade 304 S.S. • Supplied pre-plumbed ready to install • 40mm waste outlets suppliedbenefits • Only one water and waste connection • Heavy duty stainless steel brackets • Hands-free tap activation • Low level or gooseneck spout option • Prevents cross-contamination • Ideal for schools, food prep areas, factories • No electrical connections and processing facilitiesabout The BRITEX Stainless Steel Multi Knee Operated Basin is ideal in areas where multiple users #HBMKO / MULTI KNEE OPERATED BASIN need to wash their hands simultaneously and avoid cross-contamination by using hands free tapware. Common installation areas include food handling, processing, manufacturing facilities and workshops. The tap is activated by leaning against the front push panels, eliminating the need for electronic / mains powered tapware. Supplied pre-plumbed and easy to install, the Multi Knee Operated Basin is extremely heavy duty and comes complete with wall brackets, spouts, pressure limiting valve and 40mm waste outlets.sample BRITEX S.S. Multi Knee Operated Basin - XXXXL x 450W x 250H O/A. 11 litre bowl capacities. Unit to have spec. X No. pre-plumbed Knee Operated Wash Stations. Supplied pre-plumbed with goose neck/low-level type text spouts, front push panels, mixing unit, pressure limiting valve, wall mounting brackets and 40mm basin outlets - Product Code HBMKO-XXXX-X-X *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

MULTI KNEE OPERATED BASIN 135 110 PRODUCT CODE 135 6.25 HBMKO HOW TO SPECIFY: Multi Knee Operated Basin Sample Specification Code Length A B CD 217 HBMKO - 1800 - 3 - L 450 = Multi Vanity Inset Hand Basin, 1800mm Long with 3 Bowls and Low Level Spouts HAND BASINS Specification Key D = Spout Type (optional) A = Product Code L : Low Level Spouts B = Overall Length (mm) G : Gooseneck Spout C = No. of Bowls 300 600 300 Standard Sizes: 1200mm - 2 bowls 2400mm - 4 bowls 3600mm - 6 bowls 1800mm - 3 bowls 3000mm - 5 bowls 4200mm - 7 bowls MODEL HBMKO Plan 450 Length 70 250 70 250 70 #HBMKO / MULTI KNEE OPERATED BASIN 135 110 217 135 110 217 135 135 Suggested mounting height: 850-900mm AFLLength MODEL HBMKO Rear Elevation MODEL HBMKO Side Elevation Length When specifying this 217 product please include: 450 • Splashback Panel - Up to 500mm High • Product Name and Code • Custom lengths specifying • Product Dimensions options • Spout Type - gooseneck or low level spout guide • Spout Type • Legs with adjustable feet • No. of wash stations300 300 600 300 B VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

OBLIQUE BASIN 6.26 Image shows Model HBOBL-457-SS Oblique Basin in stainless finish HAND BASINSScan QR codeto view online Image shows Model HBOBL-533-1-W Image shows Model HBOBL-457-B Oblique Basin with one tap hole and Oblique Basin in black powder coat finish white powder coat finishfeatures • Ultra modern, sleek profile • Satin stainless finish and • Various standard designs • 40mm waste outlet with square top • Hand made, seamless construction • Bench mountedbenefits • Easy to clean and maintain • Models to suit wall and bench mounted • Optional black or white powder tapware coated finish • Perfect for clubs, bars and hotelsabout The BRITEX Oblique Wash Basin is a fully hand made, ultra modern counter top wash basin, #HBOBL / OBLIQUE BASIN manufactured from heavy gauge commercial grade 304 stainless steel. Supplied complete with a square-topped waste outlet, the Oblique basin can be manufactured in a range of different sizes suited to various specific project applications with an integral rear hob for mixer taps, or without a hob to suit wall tap sets. Basins are supplied standard in a satin stainless steel finish but can also be supplied with an optional white or black powder coating. Oblique basins are seamless, easy to clean and ideally suited to stylish public access washrooms in hotels, night clubs and restaurants.sample BRITEX Stainless Steel Oblique Wash Basin - XXXL x XXXW x 70D. Supplied in satin stainless/black/white spec. finish, complete with square pop up waste outlet - Product Code HBOBL-XXX-X-X text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

6.26 OBLIQUE BASIN PRODUCT CODE HBOBL HOW TO SPECIFY: Oblique Basin Sample Specification Code MODEL HBOBL-457 Front and Side Elevation MODEL HBOBL-457 Plan A B CD HBOBL - 533 - 1 - S = Oblique Basin, 533mm front to back with a taphole, Stainless Steel FinishHAND BASINS Specification Key C = No. of Tap Holes A = Product Code D = Finish SS : Satin Stainless B = Basin Length (mm) W : White Finish 457 : no tap landing B : Black Finish 533 : with tap landing ( please note that 457mm wide basins will omit option C ) MODEL HBOBL-457 Isometric View MODEL HBOBL-533 Front and Side Elevation#HBOBL / OBLIQUE BASIN MODEL HBOBL-533 Isometric View MODEL HBOBL-533 Plan specifying When specifying this options • Semi Recessed Models guide product please include: • Custom sizes - Consult Britex • Tapware - see Tapware Section: 11 • Product Name and Code • Tap holes to suit specified tapware • Product Dimensions • Round pop up waste • Finish Type - (stainless/black/white) • Satin stainless, black or white powder • No. of Tap holes (if required) • Tapware details (if required) coat finish VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

BELLAGIO WASH BASIN 6.27 Image shows Model HBBEL-A Square Edge Bowl HAND BASINSScan QR code Image shows Model HBBEL-Cto view online Concave Bowlfeatures • Modern, square profile Image shows Model HBBEL-B and • Fully hand made, seamless design Radius Cornered Bowl • Grade 304 satin stainless steelbenefits • Double-skinned robust construction *Optional tapware shown for indicative purposes only • Choice of internal bowl shapes • Bench mounted • 40mm square waste outlet • 1, 2 or 3 tap holes • Perfect for clubs, bars and hotelsabout The BRITEX Bellagio Wash Basin is a fully hand made, double-skinned stainless steel counter top #HBBEL / BELLAGIO WASH BASIN wash basin. Manufactured from heavy gauge commercial grade stainless steel, the Bellagio wash basin is supplied complete with a 40mm waste outlet and is both functional and robust. Designed for use in combination with a mixer tap, the Bellagio basin is available in a range of internal bowl shapes and is ideally suited to stylish washrooms in hotels, night clubs and restaurants.sample BRITEX Stainless Steel Bellagio Wash Basin - Square Edge/Radius Corner/Concave bowl 450L x 450W spec. x 123D O/A. Double-skinned construction. Supplied in satin finish, complete with 40mm square pop up text waste outlet - Product Code HBBEL-X *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

BELLAGIO WASH BASIN6.27 PRODUCT CODE HBBEL-B HBBEL-C HBBEL-A Radius Cornered Bowl Concave Bowl Square Edge Bowl MODEL HBBEL-A Front Elevation MODEL HBBEL-B Front Elevation MODEL HBBEL-C Front ElevationHAND BASINS MODEL HBBEL-A Side Elevation MODEL HBBEL-B Side Elevation MODEL HBBEL-C Side Elevation MODEL HBBEL-A Plan MODEL HBBEL-B Plan MODEL HBBEL-C Plan#HBBEL / BELLAGIO WASH BASIN MODEL HBBEL-A Isometric View MODEL HBBEL-B Isometric View MODEL HBBEL-C Isometric View specifying When specifying this options • Semi Recessed Models guide product please include: • Custom sizes - Consult Britex • Tapware - see Tapware Section: 11 • Product Name and Code • Tap holes to suit specified tapware • Product Dimensions • Mirror finish bowl • No. of Tap holes (if required) • Round pop up waste • Tapware details (if required) VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

VENETIAN WASH BASIN 6.28 HAND BASINSScan QR codeto view onlinefeatures • Fully hand made, seamless design • 40mm waste outlet and • Bench mounted • In-built overflow • Double-skinned construction • Concealed fixingsbenefits • Safety radius edge • Suits wall and bench mounted tapware • Easy to clean and maintain • Perfect for clubs, bars and hotels • Grade 304 satin S.Sabout The BRITEX Venetian Wash Basin is a fully hand made, double-skinned stainless steel counter top #HBVEN / VENETIAN WASH BASIN wash basin. Manufactured from heavy gauge commercial grade stainless steel, the Venetian wash basin is supplied complete with a 40mm waste outlet, radius perimeter edge and is both functional and robust. Designed for use in combination with either a wall mounted tap set or tall mixer tap, the Venetian basin has an in-built overflow waste, making it perfectly suited for public access wash- rooms such as hotels, night clubs and restaurants.sample BRITEX Stainless Steel Venetian Wash Basin - 426mm dia. x 185mm deep O/A. Double-skinned construction. spec. Supplied in satin finish, complete with in-built overflow and 40mm waste outlet - Product Code HBVEN text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

6.28 VENETIAN WASH BASIN PRODUCT CODE HBVENHAND BASINS MODEL HBVEN Front Elevation MODEL HBVEN Section#HBVEN / VENETIAN WASH BASIN MODEL HBVEN Plan MODEL HBVEN Isometric View When specifying this product please include: • Product Name and Code • Product Dimensions specifying guide VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

INSET ROUND BASIN 6.19 HAND BASINSScan QR codeto view onlinefeatures • Three standard sizes • 40mm waste outlet and • Flush mounts into bench top • Suits top or under mounting • Grade 304 stainless steel • Suits domestic and commercialbenefits • Satin finish applicationsabout BRITEX Stainless Steel Inset Round Basins are manufactured from commercial grade 304 #HBH / INSET ROUND BASIN stainless steel and have a satin finish. Stainless steel inset basins are suitable for both domestic and commercial applications and come in three standard sizes, complete with waste outlet. If desired, basins can be also be undermounted.sample BRITEX S.S. Inset Round Basin - XXXmm I.D. x XXXmm Deep. Satin finish grade 304 stainless steel supplied spec. complete with 40mm waste outlet - Product Code HBHX text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737

HAND BASINS 6.19 INSET ROUND BASIN PRODUCT CODE HBH1 Ø340 O/A x 170mmD HBH2 Ø336 O/A x 115mmD HBH3 Ø290 O/A x 100mmD HBH - dimensions HBH1 A B C HBH2 Ø340 Ø300 170 HBH3 Ø336 Ø300 115 Ø290 Ø250 100 MODEL HBH Front Elevation MODEL HBH Plan#HBH / INSET ROUND BASIN specifying When specifying this guide product please include: • Product Name and Code • Product Dimensions • Top or Under Mounting VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. Due to ongoing research and our commitment to product development, details are subject to change without notice. Details accurate at time of print. Please refer to britex.com.au for the most current product information. Allow +/- 5mm tolerance for dimensions and setouts shown in product literature. britex.com.au | [email protected] | A.B.N 83 004 309 737

LABORATORY BOWL Optional Acid Resistant 7.01 COMMERCIAL SINKSGrade 316 Stainless Steel Waste Outlet (LSPW)Scan QR codeto view onlinefeatures • Optional WaterMark certified S.S. waste • Can be top or undermounted and • Grade 316 acid resistant S.S • Radius internal corners for easy cleaning • Standard sizes kept in stock • Optional laboratory tapwarebenefits • Custom sizes available • Suits school science rooms and • Will not crack or chip laboratoriesabout BRITEX Stainless Steel Laboratory Bowls are hand fabricated using 1.2mm grade 316 acid #LB / LABORATORY BOWL resistant stainless steel and can be inset or undermounted. Available in standard and custom sizes, they are available with an optional WaterMark certified grade 316 stainless steel waste outlet (LSPW) and stopper. Ideal for school science rooms and laboratories they can also be made in grade 304 stainless steel and used in domestic or light commercial projects. If required one flange can be extended from 32mm to 80mm to accommodate tapware. Radiused internal bowl corners ensure cleaning is easy. Can be supplied with laboratory tapware if required (see reverse page for tapware options).sample BRITEX Grade 316 S.S. Laboratory Bowl - XXXL x XXXW x XXXD internally. 32mm flange to all sides spec. supplied complete with WaterMark certified grade 316 S.S waste outlet (LSPW) - Product Code LBX text *RED TEXT may denote a variable where one option only is to be selected, a nominal dimension that needs to be specified, or an optional feature that can be removed if not required. Please refer to the back of this page for additional specification details and options.VISIT britex.com.au to download BIM files, CAD drawings and THE MOST current PRODUCT LITERATURE. MELBOURNE SYDNEY PERTH BRISBANE ADELAIDE Britex Place, Mirra Crt 16 Northumberland Drv Unit 1/8 Principal Link 19 Manilla St The Britex Group Bundoora VIC 3083 Taren Point NSW 2229 Malaga WA 6090 East Brisbane QLD 4169 SA State Office t (03) 9466 9000 t (08) 9249 5464 t 1300 764 744 f (03) 9466 9044 t (02) 9531 2100 f (08) 9248 6893 t (07) 3363 2400 f 1300 784 306 f (02) 9531 2800 f (07) 3363 2444 britex.com.au | [email protected] | A.B.N 83 004 309 737