Exhibition Directory June 3 to 5, 2019 Donald E. Stephens Convention Center Rosemont (Chicago), IL, USA www.fastenertech.com www.mwfa.net Co-produced by:
® www.VertexDistribution.com Keeping it all together since 1881 tex exclusively F593 Ver h Distribution PMC s ell s throu g /vertexdistribution /vertexdistribution/ P: 847-437-0400 /vertexdist /vertex-distribution F: 847-437-7910 [email protected] STAINLESS AND ALLOY STEEL FASTENERS www.VertexDistribution.com Right Product • Right Place • Right Time® FASTENERS INCH METRIC RIVETS HOSE CLAMPS
The All-Fastener Industry Event In the Heart of the Fastener Industry EXHIBITS, SEMINARS & NETWORKING FOR FASTENER MANUFACTURERS, DISTRIBUTORS & USERS Welcome to Rosemont, IL, USA: FASTENER TECH™ ’19, the 2019 version of the biennial all-fastener industry event in the heart of the fastener industry, offers something for everyone in fasteners. Fastener manufacturers, distributors, users and industry suppliers are here in Rosemont to exchange information on the state of the fastener industry. Market conditions are improving in many sectors, so there is great benefit in discussing strategy, technology and business situations. Past surveys of FASTENER TECH™ participants indicate that about 90% of respondents like the “All-Industry” focus of the show as well as the Rosemont location. We expect a similar response at the close of this show. This year, FASTENER TECH™ includes New Product Display; After Party for exhibitors Breakfast Keynote with speaker William Strauss from the Chicago Federal Reserve; and Educational Seminars. Finally, we offer a special thanks to our exhibitors, seminar speakers, sponsors and attendees as well as the many fastener industry publications and associations that have participated in the staging of FASTENER TECH™ ’19. —FASTENER TECH™ ’19 organizers: • Fastener Technology International www.fastenertech.com •Mid-West Fastener Association www.mwfa.net FASTENER TECH™ ’19 SPONSORS: Fastener Technology International • Abbott-Interfast • Brighton-Best Int’l. • Brikksen Stainless • BTM Manufacturing • Central Wire • Contental Aero • Delta Secondary • Distribution One • Distributor’s Link Magazine • EFC • Emerald Expositions, International Fastener Expo (IFE) • FCH Sourcing Network • GlobalFastenerNews.com • Industrial Fasteners Institute (IFI) • Integrated Packaging • Kanebridge Corp. • KDS Imports • Metric & Multistandard Components Corp. • Mid-West Fastener Association • National Fastener Distributors Association • Star Stainless Screw Co. • SWD Inc. • XL Screw Corp. 38-Year Exhibitors of MWFA (formerly Chicago, Bolt, Nut & Screw Association) Fastener Shows: Abbott-Interfast Corp. • Brighton-Best International • Continental-Aero • FIN/GlobalFastenerNews.com Metric & Multistandard Components • Nylok-Chicago • Vertex Distribution (formerly Bell Fasteners) • XL Screw Corp. Co-produced by: Table of Contents Welcome, Sponsors, Associations & Publications................................................................................................................... 2 Schedule of Events..................................................................................................................................................................... 4, 6 Floor Plan......................................................................................................................................................................................... 8 Exhibit Index – Alphabetical................................................................................................................................................10-12 Exhibit Index – Numerical......................................................................................................................................................... 14 Exhibit Descriptions...............................................................................................................................................................18-31 Advertisers’ Index........................................................................................................................................................................ 31 –2–
® ALBANY Toll Free: 866-803-3890 STEEL & BRASS CORP. Fax: 312-733-9887 S B 1900 W. Grand Ave. [email protected] Chicago, IL 60622 www.albanysteel.com The Only Factory Authorized Distributor of Genuine SWAGEFORM® High Performance Thread Forming Screws Made in the USA Available From STOCK! Diameters 4-40 through 3/8-16 All Popular Head Styles up to 1-1/4” long Including: • Slotted Hex Washer • Unslotted Hex Washer • Phillips Pan Head • Slotted Pan Head • Phillips Flat Head Specialty Tapping Screws Thumb Screws Wing Nuts Type ‘B’, ‘F’, U, ‘21’ and TEKS® Cold Forged Steel Cold Forged Steel Plasti-Kwick PlusTM Plain and Zinc Plated Plain Steel and Zinc Plated 6-32 Through 3/8-16 up to 3” in Length Over 2,500 Sizes Available in Shoulder Style and Plain (No Shoulder) Sizes Include: Convenient 100 or 1,000 packs Available in 1/4-28 and 5/16-24 4-40, 12-24, 1/4-28, 5/16-24, 3/8-24, 1/2-20 We Specialize in Large Diameters: 1/4”, 5/16” and 3/8” Swageform® is a registered trademark of Sems and Specials, Inc. TEKS® is a registered trademark of ITW Buildex Plasti-Kwick Plus® is a registered trademark of Parker-Kalon
Schedule of Events All content and times are subject to change. Monday, June 3, 2019 Limiters for PlasticAssemblies: Their function, advantages and disadvantages. Why Fasteners Fail • How to select the most appropriate Threaded Insert and Compression Limiter for each assembly. 8:30 a.m. – 4:30 p.m. • Design guidelines for the plastic components that use Presented by Fastener Training Institute® various types of Threaded Inserts and Compression Instructor: Laurence Claus, from NNi Training Limiters as well as features of their design that affect and Consulting, Inc. performance. Registration Fees: Fastener Association • Case studies about specific situations where a company Members, $299; Non-members, $399 encountered a performance issue either in the design Registration Fees After May 13, 2019 stage or with an existing assembly. We will review the Members, $399; Non-members, $499 previous fastener that was being used, why it failed, and Like no other highly engineered product, the importance and the thought process behind the solution. criticality of the ‘lowly’ threaded fastener is routinely under • Installation equipment commonly used to install Threaded valued and misunderstood. No other product is used in such Inserts and Compression Limiters. quantities and expected to perform at such high levels for such low cost. And yet, most of the fastener-consuming world simply Attendees typically include Design, Manufacturing and considers these products to be “just” a bolt, screw, or nut. Ironically, experts say that as Quality Engineers and Purchasing personnel responsible many as 95% of all fastener failures are the result of improper design, selection, and for engineered components used in the fastening, joining installation. Using real world examples of fastener failures, this workshop will explore and assembly processes. However, all are welcome! Design how threaded fasteners are supposed to function and why they fail. In particular, this guides and sample kits will be provided to all attendees! workshop will address failures in service due to improper selection and design, Laurence Claus Session is taught by Christie Jones, who has been employed at improper installation and corrosion/embrittlement. It will also investigate the relationship between design characteristics SPIROL International Corporation since 1994. SPIROL is a and manufacturing, and how these can play a role in fastener failure. This workshop is designed for anyone, new or well global manufacturer of engineered components and installation established in the industry, that desires to learn more about what causes threaded fasteners to fail. Upon completion, equipment producing more than 2 billion participants will, likely, forever scrap the notion that a fastener is “just” a bolt, screw or nut. components a year and servicing over 15,000 Morning pastries and afternoon snacks with refreshments will customers worldwide. Over her 22 year be provided. tenure at SPIROL, Christie has worked as an All students will receive a certificate of completion and printed binder of course material. Applications Engineer, Operations Manager, Tuesday, June 4, 2019 North American Sales Manager, and Market FASTENER TECH™ ’19 Exhibits Open Development Manager. Christie’s strong 10:00 a.m. – 5:00 p.m. technical knowledge and broad background Fee: Registration complimentary until May 13, 2019 After May 13, 2019, $50 in fastening, joining and assembly make Christie her an industry expert. Product design L. Jones and enhancement, process development, product application, and Advanced Quality Planning have all been major aspects of her responsibilities. She has assisted countless companies in enhancing their competitiveness by reducing costs through fastener and component design. In addition to her current Marketing responsibilities, Christie also doubles as the chief trainer for the Sales Engineers and Customer Service teams at all of SPIROL’s global locations. She presents at several technical seminars each year and has authored numerous articles on the importance of fastening and joining in the marketplace. Christie Jones received her Bachelor of Science in Manufacturing Engineering from Worcester Polytechnic Institute (iWorcester, MA, USA) in 1994, and her Masters of BusinessAdministration from the University of Rhode Island (Kingston, RI, USA) in 2005. Threaded Inserts and Compression ICC-ES Evaluation Reports – Limiters for Plastic Assemblies Paving the Road to Product Acceptance 10:00 a.m. – 11:30 a.m. 1:30 p.m. – 3:00 p.m. Presented by Christie Jones of SPIROL Presented by: International Code Council Evaluation Service (ICC-ES) Registration Fee: Complimentary Instructed by: Elyse G. Levy, S.E. Senior Staff Engineer This informative seminar will cover: Registration Fee: Complimentary • An overview of Threaded Inserts and Compression Continued... –4–
Schedule of Events All content and times are subject to change. Have you ever had use of your proprietary universities. He was named winner of the 2010 Excellence in fastener product questioned by a building Teaching Award in the Business and Professional Programs code official? Do engineers bypass use at the University Of Chicago Graham School Of General of your products because they are not Studies. His research papers include analysis of the familiar to them? Leading manufacturers manufacturing sector, the automotive sector, the Midwest of fasteners used in building construction regional economy, and the trade-weighted dollar, business including some represented at FASTENER cycles and Federal Reserve payments operations. TECH™, have obtained code evaluation Elyse G. Levy Strauss has been interviewed on numerous television and reports through the International Code radio shows including Fully Threaded Radio and is regularly Council Evaluation Service (ICC-ES) to help them on both quoted in major business magazines and newspapers. He fronts. has also provided testimony concerning manufacturing ICC-ES issues technical reports on many types of building issues to the U.S. Senate. He has spoken to the MWFA group products. Evaluation reports on fasteners typically include in the past and has proven to be insightful and informative. design values derived from independent testing. These reports assure the user that the design values have been FASTENER TECH ’19 Exhibits Open verified through an independent review and that the products are manufactured under a quality control program which is 10:00 a.m. – 3:00 p.m. subject to ongoing surveillance. Fee: Registration complimentary until May 13, 2019 Fastener types that have been evaluated by ICC-ES include After May 13, 2019, $50 wood screws, self-drilling tapping screws, nails and power- actuated fasteners as well as innovative fasteners which After Show Party cannot be easily categorized. This presentation will introduce attendees to sample ICC-ES 3:00 p.m. – 5:00 p.m. in Exhibit Hall evaluation reports on fasteners and will show attendees how Featuring Entertainment and Refreshments to access these reports, which are free to all. Information Fee: Complimentary to Show Exhibitors and Attendees addressed in ICC-ES reports on fasteners will be highlighted, including contact information for the report holder, design Thursday, June 6, 2019 information and installation requirements. A tour of the ICC-ES website will be provided, through 67th Annual MWFA Golf Outing which all ICC-ES evaluation reports are available. The tour Chevy Chase Country Club will demonstrate how to search for a particular report, or for 1000 N. Milwaukee Ave. reports on certain types of products. Wheeling, IL 60090 Attendees will learn that ICC-ES is in a unique position to provide excellent technical information to building code Golf will be available at 7:00 a.m. & 12:00 p.m. officials and design professionals on a variety of new and 7:00 a.m.: Shotgun Start-Four Person Team Scramble innovative fastener products. 10:30 a.m. – 11:30 a.m.: Registration and Chipping Contest 11:00 a.m. – 11:45 a.m.: Lunch All Industry Reception 12:00 p.m.: Shotgun Start-Four Person Team Scramble 6:00 p.m.: Cocktails 5:00 p.m. – 7:00 p.m. 6:30 p.m.: Dinner Fee: Complimentary to Show Exhibitors and Attendees FASTENER TECH™ SHOW MANAGEMENT INFORMATION: Wednesday, June 5, 2019 Nancy Rich • Fastener Tech, P.O. Box 5 • Lake Zurich, IL 60047 Economic Outlook-Chicago Federal Reserve Tel: 847-438-8338 • Fax: 847-438-7580 • www.mwfa.net 9:00 a.m. – 10:30 a.m. Presentation by William A. Strauss. Mr. Strauss works in the economic research department at the Federal Reserve Bank of Chicago, which he joined in 1982. His chief responsibilities include analyzing the current performance of both the Midwest economy and the manufacturing sector for use in monetary policy. He produces the monthly Chicago Fed Midwest Manufacturing Index and organizes the Bank’s Economic Outlook Symposium and Automotive Outlook Symposium. In addition, he conducts several economic workshops and industrial roundtables throughout the year. Strauss teaches as an adjunct faculty member at several –6–
IPF now has the ability to Our Capabilities Include: Integrated Packaging & imprint your custom logo directly Fastener offers free local on our bags! Plus Barcoding and Automated / Hand Counting pickup and delivery within 15 1-25 Different Items miles of our packaging facility more! Check Weight Sales Custom Imprinting / Barcoding We are conveniently located Your one STOP packaging Warehouse / Distribution in the Chicagoland area Source!!! enabling “drop ship” Capabilities capabilities from all local importers Integrated Packaging & Fastener, Inc. Email us for a quote today! Phone 800-807-5510 Fax 847-640-8529 [email protected] 1678 Carmen Drive Elk Grove Village, IL 60007 WWW.INTEGRATEDPACK.COM
Exhibition Floor Plan FASTENER TECH 2019 DONALD E. STEPHENS CONVENTION CENTER HALL F Fire Exits Electrical Men Women Lounge Concession 1035 1136 1033 1134 1133 20' 1233 1131 1232 1231 FH FH 830 829 930 929 1030 1029 1130 1129 1230 1229 828 827 20' 927 1028 1027 1128 1127 1228 1227 826 825 926 925 1026 1025 1126 1125 1226 1225 824 823 924 923 1024 1023 1124 1123 1224 1223 820 819 920 919 1020 1019 1119 1220 1219 20' 818 817 918 917 1018 1017 1118 1117 1218 1217 816 815 916 915 1016 1015 1116 1115 1216 1215 814 813 914 913 1014 1013 1114 1113 1214 20' FH FH 911 FE 1012 812 811 912 1011 1112 1111 1212 1211 810 809 910 20' 1010 1009 1110 ENTRANCE 20' 907 1008 1007 1108 808 807 806 800 Show O ce Concessions Stairs FH Sprinkler Equip. Mech. Starbucks Elevators 6' 6' XX XX XX XX XX XX XX XXR1 R2 R3 R4 R5 R6 R7 R8 Payphones SUR-FIN REGISTRATION 6' 6' 6' 6' 50' Storage Show O ce FH Escalators R1 R2 R3 R4XX XX XX XX 6' 6' 6' FASTENER TECH REGISTRATION Women MAIN LOBBY –8–
JOIN FTI & IFI FOR 5 DAYS OF FASTENER INDUSTRY TRAINING! “There is no better investment managers can make in their business than to provide good training to their staff.” FASTENER TRAINING WEEK AUGUST 19 - 23, 2019 - CHICAGO, IL Hosted by the Mid-West Fastener Association Fastener Training Week is an intensive version of the acclaimed FTI Certi ed Fastener Specialist™ (CFS) advanced technical training program. Instead of seven separate one-day classes, FTW consists of ve intensive days of education and plant tours. After completing the training and passing a nal exam, attendees are eligible for CFS designation! FIVE DAYS OF INVALUABLE INDUSTRY TRAINING IN A SMALL GROUP ENVIRONMENT • Thread and Material Specifications “I had a fantastic class last week! I got far more • Process and Dimensional Specifications out of it than I expected and I had high hopes. • Quality Assurance Systems and Specifications All of the instructors were amazing and we had • Lot Traceability and Test Reports a pretty good group of students.” • Print Reading and Tolerances • Thread Gaging and Dimensional Inspection “Thank you! The training was a very valuable • Torque Tension experience for me. I feel I am better equipped • Full Day of Off-Site Plant Tours for my job now, as I’ll be able to assist my co-workers with any questions they may have.” 2019 FTI SUSTAINING SPONSOR THE DIFFERENCE BETWEEN YOU AND YOUR COMPETITION IS EMPLOYEE SKILL, KNOWLEDGE, AND PRODUCTIVITY! Paid by July 29th: $3300 first person per company, $2800 each additional. Additional $500 discount for association members (Pac-West, NFDA, IFI, MWFA, NCFA, SFA, AIM Prime). Can’t make it to Chicago? Join us for Fastener Training Week - Los Angeles, December 2-6, 2019! VISIT WWW. FASTENERTRAINING.ORG FOR MORE INFORMATION OR TO REGISTER!
Exhibit Index – Alphabetical ABBOTT INTERFAST INC................... 1219 CABLE TIE EXPRESS.............................. 924 FALL RIVER MFG................................. 1133 ALFA TOOLS............................................ 915 CENTRAL WIRE INDUSTRIES........... 1218 ALL AMERICA THREADED CHICAGO HARDWARE & FASCOMP ELECTRONIC PRODUCTS .......................................... 1227 FIXTURE CO......................................... 1026 ALL AMERICAN WASHER COMPUTER INSIGHTS, INC.............. 1117 HARDWARE........................................ 1228 WERKS.................................................. 1231 CONTINENTAL AERO DIV. OF ALLIED RIVET....................................... 1134 TRAMEC LLC........................................ 919 FAST-COR............................................... 1116 AMERICAN FASTENER JOURNAL.... 1014 CRESCENT MFG................................... 1216 ANEMO ENGINEERING....................... 824 CSM FASTENER PRODUCTS............. 1024 FASTENER TECHNOLOGY CURTIS METAL FINISHING............... 1020 INTERNATIONAL...................... 1013, 1015 FASTENER TRAINING INSTITUTE.... 828 GF&D SYSTEMS, INC........................... 1215 GLOBALFASTENERNEWS.COM......... 927 BEACON FASTENERS AND DELTA SECONDARY........................... 1125 HANGER BOLT & STUD CO. INC..... 1115 COMPONENTS.................................... 1029 BRADLEY GROUP OF DISTRIBUTION ONE.............................. 823 COMPANIES ....................................... 1016 DISTRIBUTORS LINK MAGAZINE...... 812 ICC EVALUATION SERVICE.............. 1217 INDUSTRIAL FASTENERS BRICO INDUSTRIES INC..................... 1120 DLP COATINGS INC.............................. 808 INSTITUTE (IFI)..................................... 830 INFASCO DISTRIBUTION..................... 913 BRIGHTON-BEST DYNACAST INDUSTRIAL INNOVATIVE COMPONENTS, INC..1007 INTEGRATED PACKAGING............... 1019 INERNATIONAL........................... 807, 908 PRODUCTS........................................... 1018 INTERCORP........................................... 1030 INTERNATIONAL BRIKKSEN STAINLESS........................ 1224 FASTENER EXPO (IFE)......................... 811 BROOKVIEW BOLT CO......................... 829 EASTERN INDUSTRIAL BTM MANUFACTURING.................... 1214 PRODUCTS INC.................................. 1229 BUCKEYE FASTENER EDWARD W. DANIEL LLC................. 1136 COMPANY............................................. 819 EFC INTERNATIONAL.......................... 923 HIGH CORROSION DIP SPIN COATINGS BLACK OXIDE PASSIVATION ZINC PHOSPHATE CLEANING PICKLING SORTING PACKAGING – 10 –
Exhibit Index – Alphabetical INTERNATIONAL FASTENERS......... 1130 NINGBO JINDING FASTENING SPIROL.................................................... 1114 INxSQL SOFTWARE............................. 1123 STAR STAINLESS SCREW................... 1111 PIECE USA, INC.................................. 1131 SUPERIOR WASHER............................ 1009 SURFACE COMBUSTION, INC............ 912 NORTH EAST FASTENERS CORP....... 930 SWD INC................................................. 1108 J&M PLATING, INC.............................. 1233 NUCOR FASTENER DIV........................ 910 NYLOK.................................................... 1023 KANEBRIDGE CORP...................... 907, 909 KDS IMPORTS....................................... 1008 PCB LOAD & TORQUE........................ 1113 THE DECC COMPANY........................ 1225 PARKER FASTENERS LLC.................. 1035 TRAMEC HILL FASTENER................... 920 KEN FORGING............................ 1211, 1213 PROSPECT FASTENER CORP............ 1012 TRI STAR METALS................................ 1010 KPF (KOREA PARTS AND VALLEY FASTENER GROUP, LLC.... 1017 VERTEX DISTRIBUTION..................... 1110 FASTENERS)......................................... 1226 LINDSTROM/STELFAST...................... 1234 RIE COATINGS........................................ 800 RIVERSIDE SPRING COMPANY........ 1230 METAL RESOURCE ROCKFORD FASTENER INC.............. 1128 W. J. ROBERTS CO., INC...................... 1127 ROTOR CLIP COMPANY...................... 820 WIFI............................................................ 810 SOLUTIONS, INC.................................. 929 WILLIE WASHER MFG.......................... 911 WYANDOTTE IND................................. 806 METRIC & MULTISTANDARD SCIENTIFIC FORMING COMPONENTS.................................... 1220 TECHNOLOGIES CORP.................... 1011 MID-WEST FASTENER SCREWS INDUSTRIES......................... 1025 ASSOCIATION (MWFA)..................... 1112 MW INDUSTRIES............................ 926, 928 SEMS AND SPECIALS, INC................ 1124 XL SCREW CORP.................................. 1212 SOLUTION INDUSTRIES...................... 809 NATIONAL FASTENER DISTRIBUTORS . SOUTH HOLLAND METAL YELLOW WOODS AND ROAD ASSOCIATION (NFDA)........................ 832 FINISHING........................................... 1223 LESS TRAVELED................................. 1119 – 12 –
Exhibit Index – Numerical MID-WEST FASTENER ASSOCIATION MW INDUSTRIES.................................... 928 INxSQL SOFTWARE............................. 1123 (MWFA)................................................. 1112 SEMS AND SPECIALS, INC................ 1124 METAL RESOURCE DELTA SECONDARY........................... 1125 FASTENER TECHNOLOGY W. J. ROBERTS CO., INC...................... 1127 INTERNATIONAL...................... 1013, 1015 SOLUTIONS, INC.................................. 929 ROCKFORD FASTENER INC.............. 1128 INTERNATIONAL FASTENERS......... 1130 RIE COATINGS........................................ 800 NORTH EAST FASTENERS CORP....... 930 NINGBO JINDING FASTENING WYANDOTTE IND................................. 806 PIECE USA, INC.................................. 1131 BRIGHTON-BEST INERNATIONAL... 807 INNOVATIVE COMPONENTS, INC... 1007 FALL RIVER MFG................................. 1133 DLP COATINGS INC.............................. 808 ALLIED RIVET....................................... 1134 SOLUTION INDUSTRIES...................... 809 KDS IMPORTS....................................... 1008 EDWARD W. DANIEL LLC................. 1136 WIFI............................................................ 810 INTERNATIONAL SUPERIOR WASHER............................ 1009 FASTENER EXPO (IFE)......................... 811 DISTRIBUTORS LINK MAGAZINE...... 812 TRI STAR METALS................................ 1010 BUCKEYE FASTENER COMPANY...... 819 ROTOR CLIP COMPANY...................... 820 SCIENTIFIC FORMING DISTRIBUTION ONE.............................. 823 TECHNOLOGIES CORP.................... 1011 ANEMO ENGINEERING....................... 824 FASTENER TRAINING INSTITUTE.... 828 PROSPECT FASTENER CORP............ 1012 BROOKVIEW BOLT CO......................... 829 INDUSTRIAL FASTENERS AMERICAN FASTENER JOURNAL.... 1014 KEN FORGING...................................... 1211 INSTITUTE (IFI)..................................... 830 NATIONAL FASTENER DISTRIBUTORS . BRADLEY GROUP OF XL SCREW CORP.................................. 1212 ASSOCIATION (NFDA)........................ 832 COMPANIES ....................................... 1016 KANEBRIDGE CORP.............................. 907 BRIGHTON-BEST INERNATIONAL... 908 VALLEY FASTENER KEN FORGING...................................... 1213 KANEBRIDGE CORP.............................. 909 NUCOR FASTENER DIV........................ 910 GROUP, LLC........................................ 1017 BTM MANUFACTURING.................... 1214 WILLIE WASHER MFG.......................... 911 SURFACE COMBUSTION, INC............ 912 DYNACAST INDUSTRIAL GF&D SYSTEMS, INC........................... 1215 INFASCO DISTRIBUTION..................... 913 ALFA TOOLS............................................ 915 PRODUCTS........................................... 1018 CRESCENT MFG................................... 1216 CONTINENTAL AERO DIV. OF TRAMEC LLC........................................ 919 INTEGRATED PACKAGING............... 1019 ICC EVALUATION SERVICE.............. 1217 TRAMEC HILL FASTENER................... 920 EFC INTERNATIONAL.......................... 923 CURTIS METAL FINISHING............... 1020 CENTRAL WIRE INDUSTRIES........... 1218 CABLE TIE EXPRESS.............................. 924 MW INDUSTRIES.................................... 926 NYLOK.................................................... 1023 ABBOTT INTERFAST INC................... 1219 CSM FASTENER PRODUCTS............. 1024 METRIC & MULTISTANDARD COMPONENTS.................................... 1220 SCREWS INDUSTRIES......................... 1025 CHICAGO HARDWARE & SOUTH HOLLAND METAL FIXTURE CO......................................... 1026 FINISHING........................................... 1223 BEACON FASTENERS AND BRIKKSEN STAINLESS........................ 1224 COMPONENTS.................................... 1029 THE DECC COMPANY........................ 1225 INTERCORP........................................... 1030 KPF (KOREA PARTS AND PARKER FASTENERS LLC.................. 1035 FASTENERS)......................................... 1226 ALL AMERICA THREADED SWD INC................................................. 1108 PRODUCTS .......................................... 1227 VERTEX DISTRIBUTION..................... 1110 FASCOMP ELECTRONIC STAR STAINLESS SCREW................... 1111 HARDWARE........................................ 1228 PCB LOAD & TORQUE........................ 1113 EASTERN INDUSTRIAL SPIROL.................................................... 1114 PRODUCTS INC.................................. 1229 HANGER BOLT & STUD CO. INC..... 1115 RIVERSIDE SPRING COMPANY........ 1230 FAST-COR............................................... 1116 ALL AMERICAN WASHER COMPUTER INSIGHTS, INC.............. 1117 WERKS.................................................. 1231 YELLOW WOODS AND ROAD J&M PLATING, INC.............................. 1233 LESS TRAVELED................................. 1119 LINDSTROM/STELFAST...................... 1234 GLOBALFASTENERNEWS.COM......... 927 BRICO INDUSTRIES INC..................... 1120 – 14 –
CHICAGO’S CHOICE FOR SAME-DAY SHIPPING
• Expanded Metric fastener line • Steel & Stainless • Multiple Finishes • Free Certifications • More Online Conveniences • Domestic Blue Devil® Sockets
Exhibit Descriptions Abbott-Interfast/OEP The fastener distributor’s single source Bimonthly publication for the fastener Directory for industrial cutting tools, abrasives and industry. fastener drill tools. Booth 1219 Anemo Engineering All American Threaded Products Booth 824 190 Abbott Drive Booth 1227 Veurnestraat 4F 4661 Monaco Street West-Vlaanderen 8691 Belgium Wheeling, IL 60090 USA Denver, CO 80216 USA Main Contact: Thomas Herroelen Main Contact: Holly Weyand Tel: +32 (0)472/36 45 75 Main Contact: Robert Baer Tel: +1 303 285 3260 Fax: +32 (0)58 518200 Fax: +1 800 322 7002 [email protected] Tel: +1 847 777 3021 [email protected] www.anemo.eu www.aatprod.com Camloc Quarter Turns, Camloc Latches, Fax: +1 847 459 4076 Studs, threaded rod, anchor bolts, U- Keenserts, Vlier, Saving Time Latches, bolts, coupling nuts and specials. Economic Latches, joining lock nuts, [email protected] SNEP, Steelsmith Clamps (316 stain- All American Washer Werks less steel), Actron latches, ARaymond, www.aicfast.com Booth 1231 Turnlock, Latchlock, IMAO, Camloc 912 E. High St. Gassprings. AIC (Abbott-Interfast Companies) is an Mundelein, IL 60060 USA ISO 9001 multi-faceted company that Main Contact: Joe Schullo Beacon Fasteners & Components has been manufacturing and supplying Tel: +1 847 566 9091 Booth 1029 the OEM industries since 1948. Through Fax: +1 847 566 8381 198 W. Carpenter Ave. in-house manufacturing, global sourcing, [email protected] Wheeling, IL 60090 USA engineering and unique inventory man- www.washerwerks.com Main Contact: Megan Bartelli agement programs, we work diligently to Domestic stocking manufacturer of spe- Tel: +1 800 669 2658 provide very competitive pricing with no cialty washers and stampings. Fax: +1 847 541 1789 sacrifice in quality. AIC offers a variety [email protected] of manufacturing capabilities and ser- Allied Rivet Inc. www.beaconfasteners.com vices like ASM, CNC, cold heading, cold Booth 1134 Beacon Fasteners & Compnents is the headed conversions, stampings, nylon 1172 Commerce Dr. leading supplier of quality driven, high- insert locknuts, assemblies, special and Geneva, IL 60134 USA performance screws, with a focus on standard plating’s and standard fasten- Main Contact: Bernard J. Bauer Thread Forming, Thread Cutting, SEMS, ers including metric. OEP LLC (Original Tel: +1 630 208 0120 High-Low Tapping Screws and Metric Engineered Products), a division of AIC Fax: +1 630 208 0562 Screws, plus complementary sizes of has become one of the largest suppliers [email protected] Sheet Metal Tapping and Specialty Cold of Knobs in the industrial market today. www.alliedrivet.com Headed Fasteners. Our extensive line of clamping, control, Semi-tubular and solid rivets as well as pointer and appliance knobs and our ex- other cold headed specials. Bradley Group of Companies perience as a manufacturer since 1948 Booth 1016 combine to offer not only quality knob American Fastener Journal 3635 Swenson Avenue products, but solutions to all knob re- Booth 1014 St. Charles, IL 60174 USA quirements. The Nationwide Fastener 6759 Oakfair Avenue Main Contact: Steve Rogalla Directory, a division of AIC, is one of the Columbus, OH 43235 USA Tel: +1 630 443 8424 best tools of the trade. Our 49th issue Main Contact: Tom Massar Fax: +1 630 443 8421 is now out in various digital forms and Tel: +1 800 528 1164 [email protected] our website is one of the most intuitive Fax: +1 614 766 9115 www.bradleygoc.com to search for parts from our listing mem- [email protected] Nylon patch, Loctite, Scotch-Grip, Pre- bers. It’s free to look, so take a peak. www.fastenerjournal.com cote, Plastisol and Threadlockers. Visit: www.aicfast.com, www.oep.com and www.nwfast.com to learn more. We keep our promises with every order to every customer. Alfa Tools Booth 915 7845 N. Merrimac Ave. Morton Grove, IL 60053 USA Main Contact: Ross Shepard Tel: +1 846 470 9595 Fax: +1 847 470 9696 [email protected] www.alfatools.com – 18 –
Exhibit Descriptions Brico Industries ates 30 stocking warehouses on a world- Brookview Bolt Co. Booth 1120 wide basis. Servicing distributors only, Booth 829 777 N. Larch Ave. the company has expanded its distribu- 811 10th Street Elmhurst, IL 60126 USA tion footprint to more than 1 million ft2, Watervliet, NY 62189 USA Main Contact: Todd Potenza servicing its customers through 20 dis- Main Contact: Steve Tel: +1 630 833 0700 tributions centers in the USA. The new Tel: +1 518 274 5091 Fax: +1 630 833 0715 BBI has redefined value with expanded Fax: +1 518 274 7911 [email protected] facilities, an interactive website and an [email protected] www.bricoind.com expanded product line. Plastic parts and fasteners, machined Cold heading manufacturer. specialties. Brikksen Stainless Brighton-Best International Booth 1224 BTM Manufacturing Booths 807, 908 4150 Church Street, Suite 1048 Booth 1214 940 North Enterprise St. Sanford, FL 32771 USA 15403 Andrews Road Aurora, IL 60504 USA Main Contact: Dee Ward Kansas City, MO 64153 USA Main Contact: George Hunt Tel: +1 800 962 1614 Main Contact: Jason Davis Tel: +1 630 898 9600 [email protected] www.btm-mfg.com Fax: +1 630 898 9601 www.brikksen.com BTM has been serving customers [email protected] Stainless steel fasteners, in inch and throughout North America for over 50 www.brightonbest.com metric. years. As an ISO 9001-2015 company, Brighton-Best International (BBI) oper- we are continually striving to meet and exceed our customer’s expectations. The Thread Detective® is a portable, precise and easy-to-use thread identifier for both nuts and bolts. Described as one of the most useful and necessary tools in any garage, workshop, tool box, fastener bin, tool crib, and just about anywhere you can find fasteners, this tool is known to save time, money, and frustration. It is especially well suited for distin- guishing between similar inch and metric threads. Our thread identifiers are available in Metric only, English Standard only, and a combination unit of Metric and English Standard. The Thread Detective® is available in three size ranges containing both inch and metric thread sizes as well as both coarse and fine pitch. The miniature unit contains sizes #1–#5 and M1.2–M3.5. The standard and most commonly used version boasts #6-1/2” and M4–M12. The jumbo unit encompasses sizes 5/8”-1” and M14–M24. Contact [email protected] for more info. Toll Free: 800-566-2774 • Phone: 847-885-9050 Fax: 847-885-9005 • www.knobsource.com – 19 –
Exhibit Descriptions We constantly pursue quality, value and locations in three countries, over 750 Crescent Manufacturing reliability improvements in the products employees and over 60 years of excel- Booth 1216 and services we provide to our custom- lence, CWI is a market leader with a wide PO Box 1350 ers. Today, BTM is a leading manufac- range of high performance specialty al- 700 George Washington Turnpike turer of bent and threaded products. loys in nickel, stainless and red metal. Burlington, CT 06013 USA Our capabilities include U-bolts, J-bolts, We make ultra-fine wire, shaped/profile Main Contact: Ginger S. Doherty studs, anchor bolts, eye bolts and bent/ wire and wire rope/strands in a wide Tel: +1 860 673 2591 threaded product manufactured to cus- range of finishes and packaging. Fax: +1 860 673 5973 tom specifications. Our size range from [email protected] 3/16\" through 4\" diameter in a variety of Chicago Hardware & Fixture Co. www.crescentmanufacturing.com ferrous and nonferrous materials, cou- Booth 1026 Cold headed fasteners 000 to 3/8\" diam- pled with our extensive array of produc- 9100 Parklane Ave. eter up to 3\" in length, aerospace, com- tion equipment, give us manufacturing Franklin Park, IL 60131 USA mercial, medical, electrical, automotive capabilities that are unparalleled in our Tel: +1 847 455 6609 and specialties in assorted lengths. industry. From threading and bending to Fax: +1 847 455 0012 welding and drilling, BTM has the highly [email protected] CSM Fastener Products trained and experienced staff to ensure www.chicagohardware.com Booth 1024 that your product is made to specifica- Family owned producer of USA made 2451 Estes Avenue tion and is delivered on time and marketed domesic forgings and Elk Grove Village, IL 60007 USA wire forms, dating back to its inception Main Contact: Jeff Gagliano Buckeye Fastener Company in 1912. Items include U-Bolts, Turned Tel: +1 630 592 1935 Booth 819 Eye Bolts, S-Hooks, Machinery and Eye Fax: +1 630 350 8499 5250 West 164th St. Bolt Shackles, Turnbuckles, Wire Rope [email protected] Cleveland, OH 44142 USA Clips, Yoke and Rod Ends. www.csmfastener.com Main Contact: Larry Kelly CSM Fastener Products has been a Tel: +1 216 535 2944 Computer Insights, Inc. leading manufacturer of specialty fas- [email protected] Booth 1117 teners for over 25 years. Located just www.buckeyefasteners.com 108 3rd St. outside Chicago, across the street Weld fasteners, leg levelers, locknuts, Bloomingdale, IL 60108 USA from O‘hare International Airport, we wing nuts, thumb screws, custom manu- Main Contact: Dennis R. Cowhey take pride in carrying on the tradition facturing, DIN rails and various other Tel: +1 800 539 1233 of American manufacturing of the high- fasteners. Fax: +1 630 893 4030 est quality. We do much more than just [email protected] manufacture fasteners. CSM provides Cable Tie Express www.ci-inc.com technical support, lightning fast turna- Booth 924 Software designed for the fastener in- round, great customer service and dec- 15470 Endeavor Drive, Ste. 100 dustry: simple, focused and effective. ades of experience. Noblesville, IN 46060 USA Main Contact: Debra Van Buskirk Continenal-Aero, Curtis Metal Finishing Tel: +1 888 603 1233 Division of Tramec LLC Booth 1020 Fax: +1 800 395 1233 Booth 919 6645 Sims Drive [email protected] 5619 W. 115th St. Sterling Heights, MI 48313 USA www.cabletieexpress.com Alsip, IL 60803 USA Main Contact: Duane Drobnich Cable ties/wire management products. Main Contact: Debbie Rynearson Tel: +1 810 339 1711 Tel: +1 708 377 0360 Fax: +1 586 939 6140 Central Wire Idustries (CWI) Fax: +1 708 377 0368 [email protected] Booth 1218 [email protected] www.curtismetal.com 6509 Olson Rd. www.continental-aero.com Curtis Metal Finishing applies engi- Union, IL 60180 USA Nylon insert locknut, all-metal locknuts, neered coatings on fasteners and small Main Contact: Tabitha Herbst free spinning nuts, Aero-Flex™ lock- metal stampings as well as provides Tel: +1 224 230 8566 nuts, floorboard screws, plating, patch- heat treatment services. CWI has the widest range of alloys for ing, stock & release. “mission critical” applications. With 14 – 20 –
Exhibit Descriptions DECC Company, The www.deltasecondary.com Main Contact: Tracey Lumia Booth 1225 Delta Secondary Inc. offers more than Tel: +1 800 356 1639 1266 Wallen Ave., SW 20 years of service to fastener distribu- [email protected] Grand Rapids, MI 49907 USA tors. Secondary operations, cut-off, www.linkmagazine.com Main Contact: Mike Michalak threading, drilling, slotting, milling, sup- The national magazine published for Tel: +1 616 588 2853 plying specials of all types. fastener distributors since 1976. [email protected] www.decc.com Distribution One DLP Coatings Inc. Booth 823 Booth 808 DECC is a rack-spray coating applicator 4004 Church Road 2301 & 2331 Eastern Ave. of Magni, Doerken, Xylan and NOF prod- Mt. Laurel, NJ 08054 USA Elk Grove Village, IL 60007 USA ucts. We specialize in coating washers, Main Contact: Larry Ward Tel: +1 847 350 0113 U-bolts, large bolts and any other part Tel: +1 856 380 0626 Fax: +1 847 350 7903 that shouldn’t be dip-spun. [email protected] www.dlpcoatings.com www.distone.com Hardware/small parts painting specialist. Delta Secondary, Inc. ERP software for wholesalers and for dis- Booth 1125 tributors. Dynacast Industrial Products 1000 Industrial Drive, Unit 3D Booth 1018 Bensenville, IL 60106 USA Distributor’s Link Magazine 14045 Ballantyne Corporate Place, Main Contact: Alina Agresto Booth 812 Suite 400 Tel: +1 630 766 1180 4297 Corporate Square Charlotte, NC 28277 USA Fax: +1 630 766 1285 Naples, FL 34104 USA Main Contact: Rick Walker [email protected] – 21 –
Exhibit Descriptions Tel: +1 704 927 2786 EFC International Female Standoffs, Swage Standoffs, Fax: +1 704 927 2791 Booth 923 Spacers, Swage Spacers, Jack Screws, [email protected] 1940 Craigshire Rd. Ferrules, Captive Panel Screws, Retain- www.dynacast-ip.com St. Louis, MO 63146 USA ers, Thumb Screws, Thumb Nuts, Preci- Dynacast Industrial Products produces Main Contact: Joyce Gerber sion Slotted Shoulder Screws, Precision low-cost, zinc alloy fasteners and stand- Tel: +1 314 439 4374 Socket Head Shoulder Screws, Handles ard components including wing nuts, Fax: +1 314 439 4474 and Chassis Fasteners. We offer our cap nuts, panel nuts, conduit nuts, pallet [email protected] parts in brass, aluminum, steel, stain- nuts, rings, plugs, latches, connectors, www.efc-intl.com less steel and nylon. A wide range of anchors and inserts. Engineered fastener supplier of panel decorative and protective finishes is also fasteners, clamps, specialty screws, riv- offered. Eastern Industrial Products, Inc. ets, bolts and automated solutions. Booth 1229 Fastener Technology International 737 Washington Street Fall River Mfg. Booth 1013, 1015 Pembroke MA 02359 USA Booth 1133 1741 Akron-Peninsula Rd. Main Contact: David Spurling 540 Currant Rd. Akron, OH 44313 USA Tel: +1 781 826 9511 Fall River, MA 02720 USA Contacts: Chip Lippincott, Fax: +1 781 826 9241 Main Contact: John Conte Tom Hutchinson, Mike McNulty [email protected] Tel: +1 800 275 6991 Tel: +1 330 864 2122 www.easternindustrialproducts.com [email protected] Fax: +1 330 864 5298 Custom rubber gaskets, o-rings, molded www.fallrivermfg.com [email protected], parts, bellows, diaphragms, rubber-to- Stainless steel and nonferrous screws, [email protected], metal parts, washers; die-cutting, slitting, bolts and nuts. [email protected] extruding, kiss cutting, laser cutting, cus- www.fastenertech.com tom molding, vulcanizing, water-jet cut- Fascomp Electronic Hardware Fastener Technology International is ting. See brochure. Booth 1228 a bi-monthly technical magazine for 1235 Tradeport Drive manufacturers, distributors and users of Edward W. Daniel, LLC Orlando, FL 32824 USA fasteners and formed parts. Available in Booth 1136 Main Contact: Jason Bertone print and digital editions, readers are lo- 46950 State Route 18 West, Suite B Tel: +1 407 226 2112 cated in 90 different countries, and sub- Wellington, OH 44090 USA Fax: +1 407 226 3370 scriptions are free for fastener industry Main Contacts: Cliff Fayne and [email protected] professionals. Each issue contains the Shelly Fairchild www.fascomp.com Fastener Focus section for fastener dis- Tel: +1 440 647 1960 Fine quality, aggressively priced elec- tributors, OEMs and users. Additional Fax: +1 440 647 1970 tronic hardware. Fascomp products publications for purchase include the an- [email protected] are sold throughout the world mainly nual Buyers’ Guide and a monthly news- [email protected] through our global network of distribu- letter, the Fastener News Report. www.EWDaniel.com tors. We are extremely proficient at pro- Edward W. Daniel LLC has over 95 years ducing customer specific screw machine Fast-Cor of expertise as a manufacturer and dis- products quickly and at very competitive Booth 1116 tributor of domestic and import fastener prices. With 40 years in the business, 1500 N. Lakeview Loop hardware including our own Diamond the managing partners have extensive Anaheim, CA 92807 USA “D” hardware brand. Products include knowledge of electronic hardware and Main Contact: Scott Webb custom or standard: eyebolts, turnbuck- its applications. Our products are avail- Tel: +1 858 277 2900 les with fittings, yokes, rod ends, flang- able in American Standard (ASE) and [email protected] es, wire rope clips, thimbles and our new metric sizes, and standard sizes are www.fast-cor.com product addition of C-Clamps. Parts are available off the shelf. Our inventory in- We are a distributor of electronic compo- available in carbon or stainless steel cludes Male-Female Standoffs, Female nents and fasteners. with finish options of zinc plating, black Standoffs, Male-Male Standoffs, Square oxide or galvanized. – 22 –
Exhibit Descriptions Fastener Training Institute® GF&D Systems provides grease fittings, Hanger Bolt & Stud Co. Booth 828 assortment kits, and fitting tools as well as Booth 1115 27943 Seco Canyon Rd., #508 accessories. 165 West New Road Santa Clarita, CA 91350 USA Greenfield, IN 46140-1093 USA Main Contact: Jo Morris GlobalFastenerNews.com Main Contact: Roy D. Wilhite, Tel: +1 562 473 5373 Booth 927 Tel: +1 800 537 7925 +1 317 462 4477 Fax: +1 661 449 3232 2207 NE Broadway, #300 Fax: +1 800 994 2658 +1 317 467 6189 [email protected] Portland, OR 97232 USA [email protected] www.fastenertraining.org Main Contact: John Wolz www.hangerbolt.com Training, on-line and live fastener train- Tel: +1 503 335 0183 US manufacturer of roll threaded headless ing. Fax: +1 503 335 3451 fasteners, hanger bolts, dowel screws, bed [email protected] pins, fully threaded double and single end GF&D Systems, Inc. www.GlobalFastenerNews.com studs and knurled pins; made in standard Booth 1215 and metric sizes in steel, brass, stainless W160S6381 Commerce Drive News and more: Industry news edited and aluminum. Muskego, WI 53150 USA for quick reading with key information Main Contact: Jeff Kempka added. Exclusive fastener-specific con- ICC Evaluation Service Tel: +1 262 754 6178 tent. Fastener segment stock reports, Booth 1217 Fax: +1 262 789 8640 fastener history, product news, FIN cal- 3060 Saturn Street, Suite 100 [email protected] endar, classifieds and more. Brea, CA 92821 USA www.gfdsystems.com Main Contact: Brian Campbell – 23 –
Exhibit Descriptions Tel: +1 888 422 7233 Tel: +1 847 885 9050 chain, from manufacturer to distribu- [email protected] Fax: +1 847 885 9005 tor to end user, and features nearly 70 www.icc-es.org [email protected] product categories. Their annual three- Experts in building product evaluation www.knobsource.com day show is in Las Vegas, NV in Sep- and certification. Plastic knobs, quick-release pins, wire rope tember 2019. lanyards, Thread Detective® thread identi- Industrial Fasteners Institute (IFI) fier tool. International Fasteners Inc. Booth 830 Booth 1130 6363 Oak Tree Blvd. Integrated Packaging 1341 Massaro Blvd. Independence, OH 44131 USA Booth 1019 Tampa, FL 33619 USA Main Contact: Michelle Lightfoot 1678 Carmen Drive Main Contact: Joanne Bialas Tel: +1 216 241 1482 Elk Grove Village, IL 60007 USA Tel: +1 888 241 0203 Fax: +1 216 241 5901 Main Contact: Jill Lewis Fax: +1 888 241 2096 [email protected] Tel: +1 847 439 5730 [email protected] www.indfast.org Fax: +1 847 640 8529 www.daggerz.com The 2018 IFI Book of Fastener Stand- [email protected] International Fasteners is “The Dis- ards, the 2018 Online IFI Book of Fastener www.integratedpack.com tributor’s Choice” for Daggerz™ brand Standards. Hardware kitting and custom bagging ser- quality construction fasteners. vices as well as skin packaging. Infasco Distribution INxSQL Software Booth 913 Intercorp Booth 1123 7230 Justin Way Booth 1030 1117 S. Cass Lake Rd. Mentor, OH 44060 USA 2541 Millennium Dr. Waterford, IL 48328 USA Main Contacts: Scott Karlovec Elgin, IL 60124 USA Main Contact: Jim Hossman Tel: +1 440 255 9600 Main Contact: Ken Spencer Tel: +1 815 581 0004 Fax: +1 440 255 1313 Tel: +1 847 841 8860 [email protected] [email protected] Fax: +1 847 841 8875 www.inxsql.com www.infasco.com [email protected] ERP software designed for the fasten- Customers can readily purchase fasten- www.intercorpusa.com er industry. Distributing, importing and ers from our eight strategically located manufacturing. stocking warehouses. Infasco carries Intercorp is an importer and master an inventory of over 20 million pounds distributor of the Strong-Point and ITW J&M Plating Inc. and sells Infasco product lines through- screws and anchors. Families include Booth 1233 out North America. Benefiting from the self-drilling, drywall, stainless steel, 4500 Kishwaukee St. experience of many long time employ- outdoor, woodworking, needle point, Rockford, IL 60074 USA ees and its extensive North American cement board, concrete and pole grip- Main Contact: Todd Lindberg distribution network, Infasco Distribution per screws. Tel: +1 815 964 4975 is positioned to meet the demands of Fax: +1 815 964 1431 the fastener distribution market. By pro- International Fastener Expo (IFE) [email protected] viding customers with quality fasteners Booth 811 www.jmplating.com from well known, reliable manufacturers 600 Corporate Point J&M Plating is an industry leader in pro- and unmatched service levels, Infasco Culver City, CA 90230 USA viding engineered solutions to the fas- Distribution is the logical choice for fas- Main Contact Morgan Wilson tener and small stamping marketplaces. teners. Tel: +1 323 817 2226 Utilizing state-of-the art heat-treating, [email protected] coating, plating and sorting equipment Innovative Components Inc. while employing the most stringent of Booth 1007 The International Fastener Expo (IFE) systems and procedures for process 1050 National Parkway is the largest and most diverse gather- control, we continually strive to exceed Schaumburg, IL 60173 USA ing of fastener and industrial profes- our customers’ quality and service per- Main Contacts: Christine Gray, sionals in North America. Founded in formance expectations. J&M Plating Glen Brin 1981 it serves all reaches of the supply – 24 –
Exhibit Descriptions is a 190,000 ft2 state-of-the-art facility KDS Imports, Inc. [email protected] offering one stop shopping to the fas- Booth 1008 www.kenforging.com tener and small stamping marketplaces. 665 Tollgate Road, Suite B J&M is certified to the ISO9001:2008 Elgin, IL 60123 USA Ken Forging is the leading domestic quality standard and our heat-treating Main Contact: David Gawlik manufacturer of forged industrial hard- and plating laboratories are ISO/IEC Tel: +1 847 882 5558 ware including: C-Clamps, Machine 17025:2005 accredited in the area of Fax: +1 847 882 5998 Clamps, D-Rings, Eye Nuts, Eyebolts, testing-mechanical. [email protected] Nut Eyebolts, Pad Eyes, Rod Ends, www.kdsimports.com Swivel Hoist Rings, T-Slot Bolts, T-Slot Kanebridge Corp. Nuts, Turnbuckles including assemblies, Booths 907, 909 KDS Imports, Inc. is a direct mill import- Bodies and Fittings and Custom Forg- 1125 Gateway Dr. er of standard and per print fasteners. ings up to 250 lb. Materials include car- Elgin, IL 60123 USA KDS Imports is selling to distributors and bon, alloy and stainless steel. Service is Main Contact: Vic LaPoma manufacturers. our strength, quality is our commitment. Tel: +1 800 222 9221 Fax: +1 201 337 2301 Ken Forging, Inc. KPF (Korea Parts and Fasteners) [email protected] Booths 1211, 1213 Booth 1226 www.kanebridge.com 1049 Griggs Road 27327, 50, Chungjusanban 5-20, Kanebridge maintains over 43,000 items Jefferson, OH 44047 USA in stock. Constant 99% fill rate and same Main Contact: Deanna Wall Chung Ju-Si, Chungcheong Buk-Do, day shipping to distributors only. Tel: +1 440 993 8091 South Korea, ASI K5001 Fax: +1 440 992 0360 Main Contact: +82 10 2597 7794 Tel: +82 10 2597 7794 Fax: +82 31 8038 9742 – 25 –
Exhibit Descriptions [email protected] ers and industrial components. We offer Tel: +1 562 799 5519 www.kpf-global.com outstanding customer service, product Fax: +1 562 684 0695 Bolts and nuts. availability and superior technical knowl- [email protected] edge and support. www.nfda-fastener.org Lindstrom/Stelfast Learn the benefits of being part of the Booths 1234 Mid-West Fastener Association NFDA community. 2950 100th Court (MWFA) Blaine, MN 55449 USA Booth 1112 Ningbo Jinding Fastening Main Contact: Bernie Longen P.O. Box 5 Piece USA, Inc. Tel: +1 800 328 2430 Lake Zurich, IL 60047 USA Booth 1131 Fax: +1 763 780 4200 Main Contact: Nancy Rich 6821 103rd Ave. [email protected] Tel: +1 847 438 8338 Kenosha, WI 53142 USA www.lindfastgrp.com [email protected] Main Contact: Ruth Dowling Coffman Since 1983, Lindstrom has been provid- www.mwfa.net Tel: +1 262 287 9933 ing distributors with value-added fas- MWFA is an association for the fastener [email protected] tener solutions they can depend on—all industry providing members and indus- www.jinding.us from a name they can trust. With over try personnel with education programs, Ningbo Jinding produces high-strength 180,000 SKUs, Lindstrom can supply dinner meetings, golf outing and fasten- bolts for the industrial and construction any size, quantity, or finish—even hard- er show. MWFA programs reflect com- industries. to-find fasteners. Stelfast Inc. is a lead- mitment to growth/service to the fasten- ing importer, stocking master distributor er industry. North East Fasteners Corp. of fasteners and specialty parts from Booth 930 Asia, Europe and South America (from MW Industries, Inc. 08 Tremco Drive standard commercial items to special Booths 926, 928 Terryville, CT 06786 USA parts per print), and a manufacturer of 9501 Technology Blvd., Suite 401 Main Contact: Martin Van Linter truck and specialty fasteners. Rosemont, IL 60018 USA Tel: +1 860 589 3242 Main Contact: George Contorinis Fax: +1 860 589 6969 Metal Resource Solutions, Inc. Tel: +1 213 749 1466, Ext. 2327 [email protected] Booth 929 [email protected] www.nef1.com 7770 West Chester Rd. [email protected] North East Fasteners has been special- West Chester, OH 45069 USA www.mw-ind.com izing in the manufacturing of small and Main Contact: Bob Beebe miniature screws since August 1963. Tel: +1 513 874 7630 MW Industries is a manufacturer of Since its inception, North East has dedi- [email protected] highly engineered industrial springs, cated itself to this niche that few have www.metalresourcesolutions.net fasteners, bellows and related metal dared to tread. Steady growth through- Distributor of stainless steel, brass and components. With several manufactur- out the years has allowed North East to copper alloy wire to the fastener manu- ing locations throughout the USA, MW expand both product line and facilities. facturing and wire forming industries. Industries designs and creates products In 1987 North East moved to its current for a variety of industries including medi- location and has since increased its pro- Metric & Multistandard cal, aerospace, energy and automotive. duction capacity many fold. Components Corp. Through decades of growth, innovation Booth 1220 and dedication, MW Industries has prov- Nucor Fastener Division 261 Shore Ct. en to be a world-class supplier of custom Booth 910 Burr Ridge, IL 60527 USA springs, fasteners, and precision metal 6730 County Rd. 60 Main Contact: Rich Cavoto components. St. Joe, IN 46785 USA Tel: +1 630 655 9009 Main Contacts: Dave Shattuck Fax: +1 630 655 9062 National Fastener Distributors David Shattuck [email protected] Association (NFDA) Tel: +1 260 337 1600 www.metricmcc.com Booth 832 [email protected] Wholesale distributor of metric fasten- 3020 Old Ranch Parkway, #300 www.nucor-fastener.com Seal Beach, CA 90740 USA Main Contact: Vickie Lester – 26 –
Exhibit Descriptions Standard hex cap screws, structural bolts Goodyear, AZ 85338 USA PCB Load & Torque and nuts, TT assemblies, finished hex nuts, Booth 1113 made-to-print specials are available from Main Contact: Matthew Boyd 24350 Indoplex Cir. Nucor Fastener. Products are available in Farmington Hills, MI 48335 USA both inch and metric. Tel: +1 623 925 5998 Main Contact: Emily Brannon Tel: +1 513 552 1127 Nylok Fax: +1 623 925 5968 Fax: +1 513 458 2172 Booth 1023 [email protected] 15260 Hallmark [email protected] www.pcb.com/loadandtorque Macomb, MI 48042 USA Fastener testing products. Main Contact: Alexandra VanHull www.parkerfasteners.com Tel: +1 586 786 1504 Prospect Fastener Corp. [email protected] Parker Fasteners is a cold heading man- Booth 1012 www.nylok.com ufacturer which is located in Goodyear, 1295 Kyle Court Applicator of performance coatings, ad- AZ, USA, and it sources all raw mate- Wauconda, IL 60084 USA hesives, sealants, lubricants, anti-corro- rials from American sources including Main Contact: Rich Pratt, Jr. sion, etc. DFARS compliance. Parker takes great Tel: +1 847 526 2950, x103 pride in making quality socket drive fas- Fax: +1 847 526 2955 Parker Fasteners teners, meeting customer product speci- [email protected] Booth 1035 fications and delivering on or before www.prospectfastener.com 13765 W. Auto Dr., Suite 122 promised due dates. Our experienced master cold headermen and operat- ing managers offer combined industry experience of over 200 years. Parker nurtures this unique depth of experience and a high level of innovation to provide quality customer support and strong growth. June 3-5, 2019 Visit our booth #1136 – 27 –
Exhibit Descriptions Retaining rings, wiring and tube clamps, [email protected] Please visit the Scientific Forming Tech- slotted and coiled spring pins, grooved nologies Corporation booth to learn more pins, plastic knobs and handles. www.rotorclip.com about DEFORM: James Miller – Director of Sales & Marketing and Kyle Roberts RIE Coatings LLC Retaining rings, constant section rings, –Research Scientist. Booth 800 spiral rings, wave springs and self-com- 221 Logeais Street pensating hose clamps. Screws Industries Eden Valley, MN 55329 USA Booth 1025 Main Contact: John Warne Scientific Forming 301 High Grove Blvd. Tel: +1 320 207 3140 Technologies Corp. Glendale Heights, IL 60139 USA [email protected] Main Contact: Keith Gasiorowski www.riecoatings.com Booth 1011 Tel: +1 800 735 4370 RIE is an applicator of high-performance Fax: +1 630 539 9060 coatings designed to solve the most 2545 Farmers Drive, Suite 200 [email protected] challenging corrosion problems in the www.screwsindustries.com industry. Columbus, OH 43235 USA Since September of 1983, we’ve been manufacturing high-quality screws and Riverside Spring Company Main Contact: James Miller fasteners, and growing to be a full ser- Booth 1230 vice supplier that our customers can 2136 12th St., Ste. 121 Tel: +1 614 451 8330, Ext. 108 count on. Rockford, IL 61104 USA Main Contact: Charlotte Vincer Fax: +1 614 451 8325 Sems and Specials, Inc. Tel: +1 815 963 3334 Booth 1124 Fax: +1 815 963 9321 [email protected] 6483 Falcon Road [email protected] Rockford, IL 61009 USA www.riversidespring.com www.deform.com Main Contact: Don Kubkowski Riverside provides springs, wire forms, Tel: +1 815 874 0000 flatforms, rings, light stampings and Fastener manufacturers share the same Fax: +1 815 874 0100 metal forms. goal when it comes to product develop- [email protected] ment and process improvement. That www.semsandspecials.com Rockford Fastener Inc. goal is to design quality products and Since 1991, as a cold forming manufac- Booth 1128 solutions, quickly and at a low cost. A turer of fasteners, Sems and Specials 725 South St. sole reliance on physical shop floor tri- Inc. has offered a diverse portfolio of Rockford, IL 61102 USA als impedes that goal. Producing hard products ranging from standard com- Main Contact: Brian Stark tooling takes time, interrupting produc- mercial fasteners to custom specials Tel: +1 815 968 5343 tion for testing is costly and a bad idea and ending with Class II military hard- [email protected] leads to a scrapped parts. Process ware. www.rockfordfastener.com simulation software enables designers Cold formed standard and special and engineers to run “virtual” production Solution Industries, LLC screws and bolts. #4 thru 1/2\" diameter trials on a computer. Simulations are Booth 809 uo to 5\" (M3-M12 up to 127 mm). typically completed in minutes or hours. 17830 Englewood Dr., #11 Many design and process iterations may Middleburg Hts., OH 44130 USA Rotor Clip Company be tested in a short amount of time. This Main Contact: Laura Vath Booth 820 greatly increases the opportunity for suc- Tel: +1 440 816 9500 187 Davidson Ave. cess. These analyses allow users to “see Fax: +1 440 816 9501 Somerset, NJ 08873 USA inside the dies”. They reveal a wealth [email protected] Main Contact: Lewis Frick of information not available on the shop www.solutionind.com Tel: +1 732 469 7333, x2211 floor. Computer modeling also provides Fax: +1 732 805 6472 a safe, risk-free environment for testing We combine over 100 years of fastener radical ideas. The DEFORM® system is experience with an eagerness to help the leading software for bulk metal form- solve the difficult challenges your busi- ing process simulation. Users commonly model operations such as cold forming, hot forging, roll forming, thread rolling, mechanical joining and heat treatment. They obtain critical feedback about the die fill, defects, temperatures, forming loads and tool stresses occurring in the process. Many manufacturers rely on DE- FORM to help them improve lead-time, extend die life and optimize progression designs. The software is fast, accurate and easy to use. Its technology is prov- en, having been successfully applied at large and small companies for decades. – 28 –
Exhibit Descriptions ness faces every day. It’s our attention Fax: +1 708 235 0840 Fax: +1 860 774 2048 to detail and commitment to excellence www.shmf.com [email protected] that sets us apart from our competition. South Holland is your RoHS headquar- www.SPIROL.com We pride ourselves in being a leader ters. Electroplating of zinc, zinc alloys, Coiled Spring Pins, Slotted Spring Pins, in fastener distribution, getting you the cadmium, phosphate and specialized top- Solid Pins, Rolled Tubular Components, parts you need faster and more afford- coats. High-corrosion-resistant finishes Ground Hollow Dowels, Dowel Busings ably than the competition. Since we only including GMW-3044, S-437 and GMW- / Spring Dowels, Compression Limiters, require $25 minimums on our fasteners, 4700 and 16730; and Chrysler PS12182, Inserts for Plastics, Precision Shims and we always maintain aggressive pricing PS8955 and the PS7187/PS10180 Thin Metal Stampings, Precision Wash- and Solution Industries is bound to be equivalents. Harley-Davidson finishes, ers, Disc Springs, Installation Technology your preferred supplier. In addition to ES805 and GES43250. ZinKlad™-96 / and High Performance Vibratory Feed our industrial fasteners, we bring a com- 250 / 1000 / 1000B. Dura®Zinc™-750 Technology. plete line of standards including socket and DuraCad™-1000. Heat treating: caps, hex caps, stripper bolts, both flat neutral and case hardening with stress Star Stainless Screw Co. and button sockets, socket sets, screws, relieving available. Complete finishing Booth 1111 locknuts, nuts, washers and more. services for more than 38 years. 810 AEC. Drive Wood Dale, IL 60191 USA South Holland Metal Finishing SPIROL Main Contact: Maggie Eisman Booth 1220 Booth 1114 Tel: +1 630 595 3440 26100 Whiting Way 30 Rock Ave. [email protected] All fastener types in 18-8/304/316/brass, Monee, IL 60449 USA Danielson, CT 06239 USA bronze/aluminum and copper/nickel. Main Contact: Oliver Bauman Main Contact: Daniel Cote Tel: +1 708 235 0842 Tel: +1 860 774 8571, Ext. 4367 Technology and News for the Entire Fastener Industry: Manufacturers, Distributors, OEMs & Users... Fastener Focus Section • Print & Digital Editions Six Issues per Year • Readers in over 90 Countries JJUUNNEE//JJUULLYY 22001199 June/July 2019 AAPPRRIILL//MMAAYY 22001199 April/May 2019 SSeerrvviinngg MMaannuuffaaccttuurreerrss,, DDiissttrriibbuuttoorrss aanndd EEnndd UUsseerrss JUNE/JULY 2019 Fastener APRIL/MAY 2019 SSeerrvviinngg MMaannuuffaaccttuurreerrss,, DDiissttrriibbuuttoorrss aanndd EEnndd UUsseerrss Fastener SURFACE TREATMENT..P. 52-58 WWW.FASTENERTECH.COM Focus IFME & Fastener Fair USA Previews...60, 76 & 112 WWW.FASTENERTECH.COM Focus Sorting & Inspecting...70 Focused News, Information and Products for Presented by... Focused News, Information and Products for Presented by... Fastener Distributors, Importers, Manufacturer’s www.fastenertech.com Fastener Distributors, Importers, Manufacturer’s www.fastenertech.com Representatives, OEMs and End Users. Representatives, OEMs and End Users. FASTENER TECHNOLOGY INTERNATIONAL In this issue... FASTENER TECHNOLOGY INTERNATIONAL TAPPING...P. 52-54 “Problem-Solver In this issue... Alloy”...56 FF News & Info SECONDARY OPERATIONS...88 FF News & Info P. 99 Threaded Rod...82-85 Retaining Rings The Traveling Salesman P. 93 ...122-123 The Traveling Salesman Spends 10 Minutes with... Spends 10 Minutes with... Washers...134 Fastener June/July 2019 Rick Rudolph, Rick Rudolph Fastener April/May 2019 Brian Musker, Associates LLC FCH Sourcing Network & Focus Focus Fully Threaded Radio Continuous improvements are at the heart of the Nord-Lock Group which now promise at leFaaFsostectnues1er,dD0Ni0ste0rwibshu, tIoonrufso,rrImsmarpteioorsnteisarsnt,daMPnarcnouedfuaiccnttsuSfroearr’lst Presented by... Which Austenitic Stainless Presented by... www.fastenertech.com Steel is Best for Dynamic Focused News, Information and Products for www.fastenertech.com How to Calculate the Spray Testing for all Nord-Lock steel washers. Representatives, OEMs and End Users. Loading? Fastener Distributors, Importers, Manufacturer’s Estimated Fatigue Life of a Disc Spring FASTENER TECH™ ‘19 Exhibits Representatives, OEMs and End Users. FASTENER TECH™ ‘19 Nord-Lock steel washers promise highest salt spray resInisthtisainsscuee... on the market Culture as a Competitive In this issue... FF News & Info Advantage Fastener Fair USA 2019 THREAD ROLLING...90 FF News & Info Preview...Continued Corrosion is a growing concern across industries and the requiremTheenTtrasvealrineg Sinalcersemaansing in Five Decades of Fastener environments where accelerating factors such as humidity, heat aRSnpicedknRdausdi1ro0lppMhion, RlulitucekstRiwouidtnho.l.a.phre Distribution Innovation, The Traveling Salesman New Generation of Growth and Customer Service Spends 10 Minutes with... Thread Forming Screws combined. The Neutral Salt Spray Test (NSST according to ISO 922A7ss)ocisiatoens LeLCof the most Brian Musker, for Light Alloy established methods to verify corrosion resistance. Nord-Lock GroSWuthepeiclhhisAaBuesssteotnffoiftriicDcySinataalimlnyliecrssaised the Next Generation of Wooden FCH Sourcing Network & Nail Firing System Fully Threaded Radio Reliable Testing for EXHIBITS, SEMINARS &corrosion resistance on all steel wedge-locking washers and promLoisaedisnga?t least 1,000 hours in Threaded Connections, salt spray test, ensuring optimum performance over time, even inFAtShTeENEmR ToEsCtH™e‘x19trEexhmibiets Washers Roundup How to Calculate the Fasteners & Joints Vol. XLII, No. 3 NETWORKING...environments. Culture as a Competitive Vol. XLII, No. 2 Estimated Fatigue Life Advantage Tracking Your Fasteners: of a Disc Spring Retaining Rings Roundup Are You Going Off the Grid? Corrosion occurs when metals come into contact with humid air FDoiivrsetrwDibeauctatiodenersI.noCnfoFovaarsttrieoonnse,rion will FASTENER TECH™ ‘19 FF Products eventually weaken steel parts and can potentially affect their funGcrotiwothna,nfdoCrucsitonmgeroSperevricaetors to FF Products Fastener Fair USA 2019 PAGES 62-67 & 116-124increase repairs which decreases productivity. It can affect structNuerxatGleinnetraetgiorniotyfWaonoddentherefore Preview...Continued cause accidents. “Extreme environments demand more,” says AnWNdaairsleFhiewrirnsgRRSoayusdntdenumopr, Sales Manager at Nord-Lock Group. “Corrosion will occur sooner or latTerracakinngdYocuarnFajseteonepras:rdize the New Generation of Register with form on pagew6ho6le oaprplicoatnionli, nnoet juasttthe bolted joint.” Thread Forming Screws Are You Going Off the Grid? for Light Alloy FF Products Reliable Testing for Threaded Connections, Fasteners & Joints Retaining Rings Roundup FF Products www.mwfa.net or www.fastenertech.com FTI_SPIROL_FastenerFocus_cover_o_June_2019_all_products.indd 1 4/30/19 8:20 AM FTI_SPIROL_FastenerFocus_cover_o_June_2019_all_products.indd 1 4/30/19 8:20 AM [Caption] Nord-Lock Original Washers and X-Series washers with standard and enlarged (SP) outer diameter and Steel Construction (SC) Washers. All steel washers withstand at least 1,000 hours in salt spray test. www.fastenertech.com • Booths 1013 & 1015 – 29 –
Exhibit Descriptions Stelfast Inc. Tel: +1 630 543 3003 Vertex Distribution Booth 1234 Fax: +1 630 543 3028 Booth 1110 2780 Spectrum Dr. [email protected] 1680 Elmhurst Rd. Elgin, IL 60123 USA www.swdinc.com Elk Grove Village, IL 60007 USA Main Contact: Jackie Hunter SWD specializes in Black Oxide, Pas- Main Contact: Tom Blakley Tel: +1 847 783 0161 sivation Zinc Phosphate, Manganese Tel: +1 847 437 0400 [email protected] Phosphate, Doerken, Magni and Yuken Fax: +1 847 437 7910 www.stelfast.com Dip Spin Coatings, Fastener Sorting and [email protected] See Lindstrom./Stelfast. Packaging. www.vertexdistribution.com Vertex Distribution is a leading master Superior Washer washers, Tramec Continental-Aero distributor of industrial fasteners with Booth 1009 Booth 919 sales and distribution centers through- 170 Adams Ave. See Continental-Aero. out the USA. Specializing in corrosion Hauppauge, NY 11788 USA resistant and specialty alloy inch and Main Contact: Luann Racca Tramec Hill Fastener Products metric threaded fasteners, rivets and Tel: +1 631 273 8282 Booth 920 hose clamps, Vertex products are used Fax: +1 631 273 8088 1602 McNeil Road in a broad array of end markets includ- [email protected] Rockfalls, IL 61071 USA ing industrial supply, water and waste www.superiorwasher.com Main Contact: Chelly Gomez water, general manufacturing, power Stocking manufacturer of Tel: +1 815 625 6600 generation, marine and oil and gas. shims and small stampings. Fax: +1 815 625 2407 [email protected] WIFI (Women in the Surface Combustion, Inc. Cold heading manufacturer of special Fastener Industry) fasteners and standards. ISO certified. Booth 810 Booth 912 Made in the USA. P.O. Box 242 1700 Indian Wood Cir. Tri Star Metals Northvale, NJ 07647 USA Booth 1010 Maumee, OH 43537 USA 375 Village Dr. Main Contact: Ruth Dowling Coffman Carol Stream, IL 60188 USA Main Contact: Ben Bernard, Main Contact: Rich Brittan Tel: +1 262 287 9933 Tel: +1 800 541 2294 VP of Global Sales Fax: +1 630 462 8225 [email protected] [email protected] Tel: +1 419 891 7150 www.tristarmetals.com www.fastenerwomen.com Stainless steel and nickel alloy CHQ Fax: +1 419 891 7151 wire; stainless steel, nickel alloy and Women in the Fastener Industry (WIFI) aluminum bar stock. is a nonprofit association whose mis- [email protected] sion is to promote the advancement of Valley Fastener Group, LLC women working in the fastener indus- www.surfacecombustion.com Booth 1017 try through education, networking and 1490 Mitchell Rd. mentoring Surface Combustion has earned a Aurora, IL 60510 USA trusted reputation over 100 years of Main Contact: Brian Prodoehl Willie Washer Mfg. providing rugged, reliable heat treating Tel: +1 630 299 8910 Booth 911 solutions equipped with the latest tech- Fax: +1 630 892 4916 2101 Greenleaf Ave. nology and backed by strong technical [email protected] Elk Grove Village, IL 60007 USA support. Surface strives to build cus- www.valleyfastenergroup.com Main Contact: Jamie Brabeck tomer relationships that endure long af- Manufacturer and supplier of rivets, cold Tel: +1 847 956 1344 ter the initial equipment purchase. When headed specials and fasteners. Fax: +1 847 956 7943 you require a thermal processing part- [email protected] ner who can draw from a broad portfolio www.williewasher.com of proven designs including pioneering Willie Washer Mfg. is a stocking manu- atmosphere and vacuum products, let facturer of flat washers, waves and us show you the Value of Surface™. Bellevilles as well as special stamping products. SWD Inc. Booth 1108 910 S. Stiles Dr. Addison, IL 60101 USA Main Contact: Matt Delawder – 30 –
Exhibit Descriptions W. J. Roberts Co., Inc. XL Screw Corp. fastener products. XL Screw Corpora- Booth 1127 tion’s Mill Division is capable of han- 181 Central Street, PO Box 1146 Booth 1212 dling all of your fastener requirements Saugus, MA 01906 USA including, and not limited to, larger Main Contact: Matt Roberts 195 Schelter Rd quantities of standard products or per Tel: +1 781 233 8176 print specials. Fax: +1 781 231 1456 Lincolnshire, IL 60069 USA [email protected] Yellow Woods and Road www.wjroberts.com Main Contact: Wayne Wishnew Less Traveled Co. Spacers and standoffs. Booth 1119 Tel: +1 847 383 2364 655 Union Blvd. Wyandotte Industries Inc. Totowa, NJ 07512 USA Booth 806 Fax: +1 847 383 2345 Main Contact: Maggie Eisman 4625 13th St. Tel: +1 630 595 3440 Wyandotte, MI 48192 USA [email protected] Fax: +1 630 595 3533 Main Contact: Dan Duffield Yellow Woods and Road Less Traveled Tel: +1 734 283 1870 www.xlscrew.com provides unusual fasteners made from [email protected] stainless, brass, bronze, nickel and alu- www.wyandotte.com Since 1968, XL Screw Corporation has minum and nickel materials, and metric Special nuts, domestic nylon insert lock- provided our customers with the high- fasteners. nuts, screw machine and CNC turned est level of service and quality in the products. fastener industry. We are proud of the relationships we have built with our customers and our reputation as the leading importer when quality and ser- vice matters most. Over 50 years later, we remain committed to providing our customers with the highest levels of quality products from the most repu- table manufactures in the world. Our USA facilities located in Lincolnshire IL, Cleveland OH, and Atlanta GA, stock over 13,000 standard inch and metric Advertisers Index Company Booth Page Albany Steel & Brass Brighton Best International — 3 BTM Manufacturing Chicago Hardware & Fixture 807, 908 IBC Darling Bolt Distribution One 1214 21 Distributors Link Edward W. Daniel 1026 23 Fastener Technology International Fastener Training Institute® — 11 Industrial Fasteners Institute Industrial Rivet 823 12 Innovative Components Integrated Packaging 812 15 Kanebridge Corporation Ken Forging, Inc. 1136 27 Mid-West Fastener Association Nylok 1013, 1015 29 Superior Washer SWD Inc. 828 9 Vertex Distribution 830 25 – 31 – — 5 1007 19 1019 7 907, 909 16, 17 1211, 1213 BC 1112 32 1023 IFC 1009 13 1108 10 1110 1
Search
Read the Text Version
- 1 - 36
Pages:
