Branch Experience Ø External look & Feel Ø Façade Upgrade
Content - Prototype Specification - External look and feel - Façade Upgrade - Pre-Entrance - Internal
Façade Upgrade (A)
Lekki (Current State)
Lekki Upgrade Option 1 (Front View) Page 5
Lekki Upgrade Option 1 (Side View) Page 6
Lekki Upgrade Option 2 (Front View) Page 7
Lekki Upgrade Option 2 (Side View) Page 8
Lekki Upgrade (Cost & TAT) Page 9
Specifications
Specifications (Façade Upgrade) x X/2 3D logo Placement Wall Paint X/2 3D logo must be centered horizontally and also given relative Specification: allowance vertically. Emulsion white and cool Grey A template must also be used Dulux paint (A003) when installing Glazing Wall tiles Specification: A001 Specification: A002 Custom Theme Bollards Specification: Custom Aluminum Specification: A004 Cladding Paving Stones Parking Strip Specification: A005 Specification: A010 Page 11
External Wall tiles (Specification A002) Fully vitrified grey tiles with matte fix hung on runners. Dry installation. No plasterworks Sizes: 300x600mm Glazing (Specification A001) Parking Strips (Specification A010) Bollards (Specification A004) Pavers (Specification A005) Structural glass assembly to external glazing with fixing Water-based acrylic striping paint. 80mm thick, fair-faced concrete details to manufacturer’s specification and Architect’s Color: White StainlessSteel security bollards pavers laid in basket weave drawings. External glass shall be hard-coat silver reflective shall comprise an inner core in pattern laid on polythene sheets glass free from defects to comply with BS 952. Aluminium galvanized mild steel, over lying on uniformly laid 25mm alloy assembly fixings/supports shall be white powder- which an outer sleeve bedding sand on well- coated to manufacturer’s details but shall be concealed in stainless steel is fitted. compacted base and sub-base. from exterior as typical of structural glazing. Gaskets, Height: 900mm Diameter: Natural grey colour. weather-stripping and general sealant shall be to BS 150mm standard and manufacturer’s specification. Frames shall be Page 12 white powder-coated.
External Wall Paint - A003 Color code Brilliant White Suitable for Perimeter 11-4001 walls and Internal walls where applicable Cool Grey 420UP Suitable for Perimeter wall Specification Cool grey 9U Suitable for Pre- Entrance Lobby Dulux paint. Paints shall be delivered in marker’s sealed containers. No dilution allowed except strictly as detailed by manufacturer. Application shall be primed and finished in 3 coats of paint. Page 13
External AC Outdoor Unit Underground Drainage cover Specifications In order to conceal the AC condensing units drainage channel, must never be installed precast concrete slabs beyond the 1st floor of must be used as a any building for ease of cover maintenance and o Specification: aesthetics, for bungalows they must be 100mm fair-faced installed on one side precast concrete preferable service gate slabs to flush with side or back of the concrete pavers building. AC condensing units must never be installed in front of a BO for aesthetic reason. Page 14
Branch Prototypes
Prototypes (Bungalow - 300sqm) (Mini Bungalow - (Two Storey - 60sqm) 800sqm) (One Storey - Page 16 800sqm)
Prototype (Mini Bungalow - 60sqm) Page 17
Prototype (Bungalow - 300sqm) Page 18
Prototype (One Storey) Page 19
Prototype (Two Storey + Proposed ATM Gallery repositioning) Page 20
Prototype Specification x Cladding X/2 Specification: A006 X/2 3D logo Placement Glazing 3D logo must be centered horizontally and also given Specification: A001 relative allowance (at least Custom Generic Pattern 350mm) vertically. A template must also be Specification: Custom Cladding used when installing Wall Paint Stone wall finish Specification: A009 Specification: A007 Parking Strip Bollards Specification: A008 Specification: A004 Paving Stones Specification: A005 Page 21
External Wall tiles (Specification A002) Fully vitrified grey tiles with matte fix hung on runners. Dry installation. No plasterworks Sizes: 300x600mm Glazing (Specification A001) Bollards (Specification A004) Pavers (Specification A005) Structural glass assembly to external glazing with fixing 80mm thick, fair-faced concrete details to manufacturer’s specification and Architect’s StainlessSteel security bollards pavers laid in basket weave pattern drawings. External glass shall be hard-coat silver reflective shall comprise an inner core in laid on polythene sheets lying on glass free from defects to comply with BS 952. Aluminum galvanized mild steel, over uniformly laid 25mm bedding sand on alloy assembly fixings/supports shall be white powder- which an outer sleeve well-compacted base and sub-base. coated to manufacturer’s details but shall be concealed in stainless steel is fitted. Natural grey colour. from exterior as typical of structural glazing. Gaskets, Height: 900mm Diameter: weather-stripping and general sealant shall be to BS Parking Strips (Specification A010) 150mm standard and manufacturer’s specification. Frames shall be Water-based acrylic striping paint. white powder-coated. Color: White Page 22
External Stone Wall Rain Screen Cladding Stone wall (Specification A007) Rain Screen Cladding (Specification A006) Rubble stone walling using undressed, rough faced Aluminum composite panels of silver grey metallic colour installed granite. Stones shall be closely laid with concealed professionally on masonry walls. These shall be free from blemish, cement grouting. Stones shall be cleaned and polished straight edged, uniformly spaced, and factory- finished edges. upon completion. Page 23
External Wall Paint - A003 Color code Brilliant White Suitable for Perimeter 11-4001 wall (upgrade) and Internal walls (prototype) Cool Grey 420UP Suitable for Perimeter wall Specification Cool grey 9U Suitable for Pre- Entrance Lobby Dulux paint. Paints shall be delivered in marker’s sealed containers. No dilution allowed except strictly as detailed by manufacturer. Application shall be primed and finished in 3 coats of paint. Page 24
Pre-Entrance
Pre-Entrance Entrance Door Floor Finish o Mantrap doors should Grey tiles with grip will be used for safety come in their natural grey reasons due to contact with water. colour. Specification: Granite tiles should be o Specification: free of defects, perfectly squared at corners, and with a flamed finish. Natural grey in colour. Sizes: 300x600mm or 600x 600mm depending of entrance foyer size. Foot Mat Specification 100% nylon triple strand piles twisted and heat set. Each pile scrubs the soles of footwear then springs back into shape. Traps dirt, grit and moisture deep within the pile. Size: 1500mm X 1000mm Colour: Dark grey Page 26
Pre-Entrance Flower Bed Ramp Ramps must be made available for disabled access. Concrete Flower beds with greenery should be used Ramp should have a handrail on the open end and Infront of our branches. slope should be less 10 degrees. Size: Height of the concrete bed should flush with the Ground floor level Page 27
Internal
Internal Specifications Page 29
Internal Specifications Specifications Teller Counter Size: 20mm thick white corian top with 1/8” standard eased edge Facing slab depth: 100mm Slab depth: 1000 mm Individual teller width: 1100mm Front counter material: Light wenge HDF Board Footing/skirting: Stainless steel 1100 mm 1100 mm 1100 mm 1000 mm Page 30
Internal Specifications Staircase Deposit Slip Counter Specifications Specifications Banking hall staircase shall Size: 8 mm thick grey be the steel staircase type vitrified tiles on while back of house stair suspended concrete shall be the regular slab. Spacing should be concrete version. 3mm with normal cement grouting Facing slab depth: 100mm Slab depth: 400mm Counter width: Prototype A Prototype B Prototype C Page 31
Internal Specifications AC Unit in Teller area Cable Management/Sockets Skirting 100mm Specifications Specifications Specifications 100mm high tile skirting to match There shall be floor boxes as well as conduit wall floor finish. Product: Daikin & Panasonic points to ensure proper cable management for Edge Taping: PVC White L Shape Colour: White aesthetics and ease of connection. Tile Trim 8mm x 2.4m AC evaporating units must not Recommended skirting: Bullnose be installed on the full wall This will also be complemented with the new table skirting behind the tellers. Ceiling designs, which will conceal the computer cables Cassette units should be used from the system to the socket. instead. Page 32
Internal Specifications Wall Paint Floor Tiles Specification Specification First choice tiles free of defects. 600x600mm. Tiles shall be hardwearing and fully vitrified. Spacers shall be used White silk Dulux paint. Paints shall be delivered during laying and grouting shall be with ordinary in marker’s sealed containers. No dilution cement. Skirting tiles shall be plumb and aligned. It shall allowed except strictly as detailed by be no more than 100mm high, machine-cut or factory manufacturer. Application shall be primed supplied. and finished in 3 coats of paint. Page 33
Internal Specifications Light fittings Mirror Ceiling Panels Specification Specification Specification 600x600mm LED light fittings Plain white gypsum ceiling tiles. All mirrors shall be bevel-edged 600x600mm on exposed white epoxy- float glass and secured to wall by coated aluminum grids, Grids shall be screws with polished chrome caps. hung with mild steel wire hangers, main Float glass shall be free of defects tees, cross tees, perimeter trims and wall and distortion. springs. Page 34
Internal Specifications Internal glass partitioning LED Screen for FX rates 10mm thick frameless glass Specifications panels with top and bottom 43 Inches portrait u-channel support. Glass screen will be energy- doors shall have door stops. efficient versions such Where required, resilient door as LED. closers shall be used and for double doors, floor spring Function: Rate screen system shall be used. and CNN Privacy frosting will also be applied. Centrally controlled with no visible cabling Page 35 and trunking No TV Stand. Height from Ground level of the banking hall: 1.8m
Internal Specifications LED Products Screen Internal Doors Specifications Solid flush doors in grey (Pantone Cool grey 420UP) with matte finish With architraves. Height: 2.4m with appropriate door handle Specifications 55 Inches portrait screen will be energy-efficient versions such as LED. Function: Display of Products and announcements. Centrally controlled with no visible cabling and trunking TV Stand shall not be used. Page 36
Internal Specifications Floor finish Restroom Specifications Specifications Colour: Grey Floor mounted with visible tank for regular branches, while Finishing: Matte the suspended type with concealed tank will be used in Size: 600mm by 600mm high-brow locations. Colour: White Wall finish Piping for Mechanical installations shall be composite pipes for durability while galvanized and no pvc pipes shall Specifications be used. Colour: White Finishing: Glazed Size: 300mm X 600mm Horizontal laid tiles with well trimmed machine offcuts Wash Bowl Specification Suspended sinks only, preferably Twyford or any approved equal. No full pedestal sinks allowed Colour: White Page 37
Internal Specifications Burglar bars Blinds Specifications Specifications Type: Roller Blinds Colour: White gloss paint Colour: Light Grey Bars Specification: Pantone 422UP Size: Subject to window and curtain wall Size: Subject to window or curtain wall size size Page 38
Internal Specifications Potted Plants Size: Medium Material: Fibre glass Size: Large 4ft Finish: Material: Fibre glass Finish: Suitable for smaller entrances Suitable for large entrances Page 39
Others Back up Generator System Cooling Room Systems room shall be cooled indirectly wherever We recommend that Business Offices must possible. have back-up generators of equal size as The evaporator shall be located in a different the primary set to ensure 100% uptime. space while cool air shall be ducted to the systems room. (add picture) We are however exploring alternative energy sources as an option. Roof Covering The gauge of the roof covering must not be less Building Clearance than 0.55mm Our ground floor level must be at least Vault Door Vault door shall be Chubb Brand or an approved 500mm above the crown of the road in equal (add picture) front of it to protect the building from Cluster Switch To improve the ambience of the Banking Hall flooding and possible future especially, all switches – lighting, Air conditioning, sound system shall be clustered at one spot within neighborhood elevation. the back of house area. (add picture) Page 40
Prototype (Detached ATM Gallery Signage Option 1) Page 41
Prototype (Detached ATM Gallery Logo Option 2) Page 42
Prototype (Detached ATM Gallery Logo Option 3) Page 43
Prototype B (Signage placement proposal) Page 44
Prototype (Specification) Page 45
Page 46
Page 47
Search
Read the Text Version
- 1 - 47
Pages: