FACULTY OF ELECTRICAL ANDAUTOMATION TECHNOLOGYDIRECTORY OF MACHINERIESPNEUMATICS & HYDRAULICSLABORATORY
MODEL FPC 101B-LED BRAND FESTO / OMRONYEAR OF 1996 / (1996/2006) / 2006 UNITSPURCHASE 12 / 10 - TAGGING TATI/1996/22SERIAL NO. PLC Lab, FTKEA New Building TATI/2006/22348LOCATION Komponen PLC PLC FESTO Stesen Kerja PLC1. INTRODUCTION • Used to make a PLC programmed for moved any pneumatic and hydraulic components or electrical components. • Programmed will be doing by computer and then can transfer to PLC. Then, we can test with pneumatic or electrical components. • Gets more information for every student about the operation was happened and followed what the programmed.
2. SPECIFICATIONS • Input- Have 3 plug for 8 point – Proximity sensor • Output- Have 2 safety plug for 8 output components. • Connection- 4mm safety plug for 24V DC. • I/O status- Used LED3. FUNCTION • For practical training to moved a hydraulic or pneumatics component. • Can used any circuit and combined the circuit with PLC program4. COURSES INVOLVE • DMT 2083 – PLC 1 - Diploma in Industrial Automation Engineering (Mechatronics) - Diploma in Industrial Automation Engineering(Electronics & Instrumentation) - Diploma in Industrial Automation (Computer Integrated System) - Diploma in Polymer Engineering Technology • DMT 3013 - PLC 2 - Diploma in Industrial Automation Engineering (Mechatronics) • HEE 3044 E - HND in Electrical/Electronics Engineering • Bachelor of Engineering Technology (Honours) (Mechatronics) • Bachelor of Manufacturing Engineering Technology (Tooling) • Bachelor of Engineering Technology (Robotics and Automation)5. SUPERVISOR / CO-ORDINATORBIL NAME POSITION E-MAIL PHONE NO.1. Azman bin Abdul Rahman Lecturer [email protected] 017-324 63382. Khadijah binti Shafie Technical Assistant [email protected] 013-989 48646. REMARKS Mechatronic, Instrumentation, IT and HND course are using these components in a laboratory.7. SUPPLIER NAME / WEBSITE http://www.festo-didactic.com
MACHINE / Hydraulics / Electro-Hydraulics WorkstationINSTRUMENTMODEL No. 162 221 /162 222 BRAND FESTOYEAR OFPURCHASE 1996 / 2007 UNITS 4/4SERIAL NO. - TAGGING TATI/1996/22 TATI/2007/22LOCATION Pneumatics & Hydraulics Lab , FTKEA New BuildingHidraulik Component Hidraulik/elektro-hidraulik Panel1. INTRODUCTION • Hydraulics workstation is used for test a hydraulics circuit to extend or retract the cylinder or others hydraulic components together for example with valve, double solenoid valve, 4/2 way valve, hydraulic motor and etc. • Also use as training as and introduction for students to knows how the hydraulics circuit was function hydraulics system was action. • Hydraulics system used an liquid, for example is oil. • The Hydraulics system is very high cost for maintenance not as a Pneumatics system.2. SPECIFICATIONS Have a hydraulic component for every drawer pneumatics workstation. Example the components are Valve, electrical cable, hose, cylinder, switch, proximity sensor and others.
3. FUNCTION • For practical training to moved a hydraulic component. • To know how students understand about the hydraulic circuit.4. COURSES INVOLVE • DMT 1052 – Pneumatik/Hidraulik - Diploma in Industrial Automation Engineering (Mechatronics) - Diploma in Industrial Automation Engineering (Electronics & Instrumentation) - Diploma in Industrial Automation (Computer Integrated System) - Diploma in Polymer Engineering Technology • DMT 1072 - Automation Technology - Diploma in Manufacturing Engineering (Tool and Die Design) - Diploma in Manufacturing Engineering (Tool and Die Making)5. SUPERVISOR / CO-ORDINATORBIL NAME POSITION E-MAIL PHONE NO.1. Azman bin Abdul Rahman Lecturer [email protected] 017-324 63382. Khadijah binti Shafie Technical Assistant [email protected] 013-989 48646. REMARKS -7. SUPPLIER NAME / SUPERVISOR http://www.festo-didactic.com
MACHINE / Pneumatics WorkstationINSTRUMENTMODEL No. 162 220 BRAND FESTO 24YEAR OF PURCHASE 1996 UNITS TATI/1996/22SERIAL NO. - TAGGINGLOCATION Pneumatics & Hydraulics Lab , FTKEA New BuildingPneumatik workstation Pneumatik Component1. INTRODUCTION • Pneumatics workstation is used for test a pneumatics circuit to extend or retract the cylinder or others pneumatic components together for example with valve, double solenoid valve, 3/2 way push button, Two Pressure Valve, shuttle Valve and etc. • Also use as training as and introduction for students to knows how the pneumatics circuit was function pneumatics system was action. • Pneumatics system used an air power or air from a compressor system. Air from compressor was outlet and that’s air make sure was filtered and dried.2. SPECIFICATIONS Have pneumatic components for every drawer pneumatics workstation. Example the components are Valve, electrical cable, hose, cylinder, switch, proximity sensor and others.3. FUNCTION • For practical training to moved a pneumatic component. • To know how students understand about the pneumatics circuit.
4. COURSES INVOLVE • DMT 1052 – Pneumatik/Hidraulik - Diploma in Industrial Automation Engineering (Mechatronics) - Diploma in Industrial Automation Engineering (Electronics & Instrumentation) - Diploma in Industrial Automation (Computer Integrated System) - Diploma in Polymer Engineering Technology • DMT 2052 – Elektro – pneumatik - Diploma in Automation Engineering (Mechatronics) - Diploma in Automation Engineering (Electronics & Instrumentation) - Diploma in Industrial Automation (Computer Integrated System) • DMT 1072 - Automation Technology - Diploma in Manufacturing Engineering (Tool and Die Design) - Diploma in Manufacturing Engineering (Tool and Die Making) - Bachelor of Manufacturing Engineering Technology (Tooling)5. SUPERVISOR / CO-ORDINATORBIL NAME POSITION E-MAIL PHONE NO.1. Azman bin Abdul Rahman Lecturer [email protected] 017-324 63382. Khadijah binti Shafie Technical Assistant [email protected] 013-989 48646. REMARKS -7. SUPPLIER NAME / WEBSITE http://www.festo-didactic.com
Search
Read the Text Version
- 1 - 7
Pages: