Barrier Group 2018 Product & Services Guide

Marking Dots Compliance Black Wheel StopDurable injection moulded plastic dots for marking car Having the benefits of our Compliance LLDPE wheel stopsparking bays. Can be fixed to asphalt with galvanised but the cost advantage of being produced from recyclednail or alternatively into concrete surfaces using a polyethylene, the Compliance Black competes directly withsuitable two-part epoxy adhesive system. Marking dots cheaper recycled rubber wheel stops.are 100mm in diameter, sold in White or high visibilityYellow packs of 10, and supplied with galvanised nails.   •  Designed to comply with AS/NZS 2890.1:2004   •  Made in Australia from recycled polyethylenePart No. description   •  Fixing kits available for various installation typesmd100S-W Marking dots with fixings – White (10 pack)   •  Competitive with cheaper rubber wheel stopsMD100S-y Marking dots with fixings – Yellow (10 pack)   •  Four fixing points for maximum hold-downCopyright © 2018 Barrier Group Pty. Ltd. MADE IN AUSTRALIA! Learn more about Compliance Wheel Stops on page 122. Part No. description CWS1700rb Compliance low cost recycled wheel stop with blanking plugs (5kgs) – Black KIT No. fixing kits – ORDER SEPARATELY KIT17 Fixing kit for good quality asphalt or bitumen installations KIT18 Fixing kit for conventional reinforced concrete installations – Drill depth 85mm KIT19 Fixing kit for shallow drilled concrete installations – Drill depth 43mm ••• 137 

T-Top Bollard T-Top Eye Nut Part No. DESCRIPTION BTCEN T-Top eye nut plus 2 clips (pack of 10) Plastic Safety ChainPart No. DESCRIPTION Part No. DESCRIPTIONBTC1150 T-Top bollard and base 1150mm (6.4kgs) – Hi-vis Orange PC6R-R Plastic safety chain – 6mm Red per 25 metre rollBTC1150B Replacement rubber base only (5.6kgs) – Black PC6Y-R Plastic safety chain – 6mm Yellow per 25 metre rollBTC1150T Replacement T-Top bollard only PC6RW-R Plastic safety chain – 6mm Red/White per 25 metre roll PC6W-R Plastic safety chain – 6mm White per 25 metre roll138 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Reflective Traffic Cone 1000mm Retractable Cone Bar Pilot Cone Barrier 77 Part No. DESCRIPTION RCB2 Retractable cone bar – 1.2 to 2 metres Retractable Cone Belt Topper Pilot Belt Barrier 72Part No. DESCRIPTION Part No. description                   BTC1000R Reflective traffic cone 1000mm (6.4kgs) – Hi-vis Orange RBBY9 9 metre retractable belt barrier – Black/Yellow RBRW9 9 metre retractable belt barrier – Red/WhiteCopyright © 2018 Barrier Group Pty. Ltd. ••• 139 

Small Traffic Cones Cone RingPart No. DESCRIPTION Part No. DESCRIPTIONBTC450R Reflective traffic cone 450mm (1.4kgs) – Hi-vis Orange C-RING Cone ring 23 x 19 x 10mm (pack of 10)BTC700R Reflective traffic cone 700mm (3kgs) – Hi-vis OrangeCTS101-P Cone Top Sign-Arrow (Pack of 5) – Hi-vis Yellow Illuminated Baton LED Cone Lights Twist to switch on/off. Requires 2 x \"D\" batteries (not included).Part No. DESCRIPTION Part No. DESCRIPTIONIBLR Illuminated baton 540mm – Red LCL-R LED cone light (batteries not included) – Red LCL-W LED cone light (batteries not included) – White140 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Collapsible Cone Collapsible Cones Rubber Base Plastic BasePART No. DESCRIPTION PART No. DESCRIPTIONBTC720C-RB Collapsible cone 720mm high (3.8kgs) – Rubber base BTC450C Collapsible cone 450mm high (1.1kgs) – Plastic base BTC720C Collapsible cone 720mm high (1.8kgs) – Plastic baseCopyright © 2018 Barrier Group Pty. Ltd. ••• 141 

One-Piece Two-Piece Flexible Bollards Rebound DelineatorsPart No. DESCRIPTION Part No. DESCRIPTIONFBP450 Plastic one piece flexible bollard 80 x 450mm rd900 Rebound delineator 900 x 70mmFBP800 Plastic one piece flexible bollard 80 x 750mm rd1000 Rebound delineator 1000 x 70mm rd1200 Rebound delineator 1200 x 70mm142 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Two-Piece Two-Piece Rebound Bollards Rebound Bollards with Chain LoopPart No. DESCRIPTION Part No. DESCRIPTIONKDB1000 Plastic two piece rebound bollard 100 x 1000mm (3.4kgs) FB800R Plastic two piece rebound bollard with chain loop 100 x 800mm (2.5kgs)KDB1000B Replacement base only (2.1kgs)KDB1000T Replacement bollard top only ••• 143 Copyright © 2018 Barrier Group Pty. Ltd.

Magna-Post Screw BaseMagnetic Flexible Bollard Rebound BollardA strong magnetic base attaches to a fixed steel floor These plastic rebound bollards are made from flexibledisc, while a rubber coupling provides the bollard with EVA material and are designed for use as road separatorsflexibility on impact. When struck they will always return or delineators. Access to the mounting disc is throughto the same position. They can be quickly removed. a removable top cap. Available in Red, Yellow, Green or Blue with 2 x 100mm reflective bands. Galvanised steel floor disc, screw fixed Part No. DESCRIPTION or epoxied to floor surface. rb750s-r Screw based rebound bollard with anchor 750 x 200mm (1.8kgs) – Red rb750s-y Screw based rebound bollard with anchor 750 x 200mm (1.8kgs) – Yellow Part No. DESCRIPTION rb750s-g Screw based rebound bollard with anchor 750 x 200mm (1.8kgs) – Green mp7012-y Magnetic flexible bollard 700 x 120mm (1.3kgs) – Yellow rb750s-b Screw based rebound bollard with anchor 750 x 200mm (1.8kgs) – Blue mp10012-y Magnetic flexible bollard 1000 x 120mm (1.6kgs) – Yellow mpd Magna post disc 100mm diameter (0.2kgs) – Galvanised Copyright © 2018 Barrier Group Pty. Ltd.144 •••

Part No. description                Length x Width x Height Part No. description                Length x Width x HeightKR1030 Rubber kerb ramp 485 x 425 x 110mm (15.4kgs) – Black krr100 Hi-vis kerb ramp body 610 x 320 x 100mm (10kg) – Black/Yellow krrE100 Hi-vis end cap 310 x 310 x 100mm (3.5kg) – Black/Yellow krr150 Hi-vis kerb ramp body 600 x 360 x 150mm (16.5kg) – Black/Yellow krrE150 Hi-vis end cap 360 x 360 x 150mm (7kg) – Black/Yellow krr200 Hi-vis kerb ramp body 600 x 450 x 200mm (28kg) – Black/Yellow krrE200 Hi-vis end cap 450 x 450 x 200mm (12.5kg) – Black/Yellow TRraomllpesy 184Part No. description                 Length x Width x Height Part No. description                Length x Width x HeightaR60 Access ramp 609 x 1070 x 63.5mm (16kgs) – 60mm Black rubber SPM Smart parking mat 640 x 300 x 40mm (1.4kg) – YellowaR75 Access ramp 609 x 1070 x 76.2mm (22kgs) – 75mm Black rubberaR100 Access ramp 609 x 1070 x 101.6mm (26kgs) – 100mm Black rubber ••• 145 Copyright © 2018 Barrier Group Pty. Ltd.

Part No. description                Length x Width x Height Part No. description                Length x Width x HeightWC1 Wheel chock 255 x 180 x 210mm (5.5kgs) WC2 Wheel chock 250 x 180 x 220mm (6.7kgs)Part No. description                Length x Width x Height Part No. description                Length x Width x HeightWC3 Wheel chock 305 x 300 x 260mm (10.5kgs) wc4P Injection moulded wheel chock 210 x 120 x 110mm (0.35kg)146 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Part No. description                Length x Width x Height Part No. description                Length x Width x Heightwc5p Urethane wheel chock 430 x 360 x 370mm (6.8kgs) – Large wc6p Urethane wheel chock 290 x 200 x 210mm (1.55kgs) – MediumPart No. description                Length x Width x Height Part No. description                Length x Width x Heightwc7p Urethane wheel chock 200 x 170 x 150mm (0.85kg) – Small wc8p Moulded plastic wheel chock 480 x 200 x 230mm (1.75kgs) – Largewc7p-H Truck mount for WC7P (0.5kgs) wc8p-H Truck mount for WC8P (1.4kgs)Copyright © 2018 Barrier Group Pty. Ltd. ••• 147 

Need protection? Every business has issuesat some point with asset protection, whetherit’s a loading dock, unprotected pallet rackingor the structural columns in your warehouse.Of course it’s not just about the financialcost of repairs to physical assets caused bya misbehaving Rhino. The potential cost ofpersonal injury resulting out of workplaceaccidents can be debilitating for staff andthe business alike.

BUFFERS AND BUMPERS

3 4Skinz One-Piece Bollard Sleeves 2 1Say no more to ugly, scratched or rusting bollards!Our tough moulded polyethylene sleeves offer improvedimpact resistance and cost less than prepping andrepainting old bollards. Skinz are available in a rangeof sizes that fit most common bollard sizes and brands.Fitting takes seconds and they can be cut down tosuit different height bollards. Reflective tape kitsare available on request. Flip back to page 8 for ourBollards with Skinz range.style PART No. DESCRIPTION Yellow Skinz supplied as standard, other colours 1 SKZ105-Y Skinz bollard sleeve to suit up to 105mm diameter – Safety Yellow available on request (minimum quantities apply). 2 SKZ145-Y Skinz bollard sleeve to suit up to 145mm diameter – Safety Yellow 3 SKZ175-Y Skinz bollard sleeve to suit up to 175mm diameter – Safety Yellow Shown with optional Red reflective tape kits. 4 SKZ225-Y Skinz bollard sleeve to suit up to 225mm diameter – Safety Yellow + KITRT25-R Reflective tape kit to suit SKZ105 – 25mm Red Copyright © 2018 Barrier Group Pty. Ltd. + KITRT50-R Reflective tape kit to suit SKZ145 & SKZ175 – 50mm Red + KITRT75-R Reflective tape kit to suit SKZ225 – 75mm Red150 •••

20mm 8 degree side shift tilt and returnShock Absorbing Bollards 360° rotationUsed with enormous success in logistics and warehousing,our Shock Absorbing Bollards can withstand repeated Hot dip 1200mmknocks as well as helping to prevent damage to sensitive galvanised bollardfloors, doors and walls. Available in five models, which allhave the ability to move in three directions simultaneously, with protectiveto absorb impacts, and then return to their original polyethylene sleevesposition. For more information on our five models,see pages 16-17.PART No. ABCD E Kgs* FINISH Hardened solid steel coreSAB90SS-SM 90 900 3.05 150 – 12 SSSAB90SS-IF 90 900 3.05 – 80 x 25 12 SS 350mm base plateSAB140-SM 140 1200 5 350 – 33 HDG+PS SURFACE MOUNT MODELSAB140-CD 140 1200 5 – 300 x 50 33 HDG+PSSAB220-CD 220 1300 6.4 – 300 x 100 120 HDG+PS CORE DRILLED MODELNote: All dimensions in mm – (C) Bollard diameter, (B) Height above ground, (C) Wallthickness, (D) Base plate diameter, (E) Shaft size LxW. Finish: Hot Dip Galvanised(HDG) and Polyethylene Skinz (PS), or 316 Stainless Steel (SS) only. *Approximate weight.Copyright © 2018 Barrier Group Pty. Ltd. ••• 151 

Column Cushion Copyright © 2018 Barrier Group Pty. Ltd.Designed to minimise damage to structural columns bysurrounding them with a foam-filled polyethylene cushion.They also protect the offending vehicle, forklift orpowered machinery from harm. The two blow-mouldedhalf shells can be installed in seconds without the needfor any tools, and removed at any time for cleaning ormaintenance. They can be used singularly or stacked inpairs. Available in a range of standard sizes that fit mostsquare or round columns. Made from U.V. stabilised,chemical resistant and non-conductive material.Blow-moulded LLDPE outer with an injectedfoam core to provide greater protectionagainst accidental knocks.152 •••

Foam-filled for Column cushionsextra protection shown here are stacked two-high forBeware of inferior designs additional protection.that are just filled with air!PART No. DESCRIPTION PART No. DESCRIPTION PART No. DESCRIPTIONCC350-100 Column cushion kit, 350mm outer x CC610-200 Column cushion kit, 610mm outer x CC870-350 Column cushion kit, 870mm outer x 100mm inner x 900mm high, 6.5kgs. 200mm inner x 900mm high, 12kgs. 350mm inner x 900mm high, 18kgs.Shown above Blow-moulded LLDPE with injected Shown above Blow-moulded LLDPE with injected Shown above Blow-moulded LLDPE with injected foam-filled core. Fits square: 100mm. foam-filled core. Fits square: 150-200mm. foam-filled core. Fits square: 300-350mm.CC350-150 Column cushion kit, 350mm outer x CC610-250 Column cushion kit, 610mm outer x CC870-400 Column cushion kit, 870mm outer x 150mm inner x 900mm high, 7kgs. 250mm inner x 900mm high, 12.5kgs. 400mm inner x 900mm high, 18kgs. Blow-moulded LLDPE with injected Blow-moulded LLDPE with injected Blow-moulded LLDPE with injected foam-filled core. Fits square: 100-150mm. foam-filled core. Fits square: 200-250mm. foam-filled core. Fits square: 350-400mm.Column cushion supplied as two foam-filled 1/2 shells CC610-300 Column cushion kit, 610mm outer x CC870-450 Column cushion kit, 870mm outer xwith three velcro straps. 300mm inner x 900mm high, 13kgs. 450mm inner x 900mm high, 18kgs. Blow-moulded LLDPE with injected Blow-moulded LLDPE with injected foam-filled core. Fits square: 250-300mm. foam-filled core. Fits square: 400-450mm. Above example shows cushions stacked in pairs. NOTE: 870 Series only available on special order.Copyright © 2018 Barrier Group Pty. Ltd. ••• 153 

Heavy Duty Flush Mounting Dock Bumper LDB730Loading Dock Bumper Where the loading dock height is at an appropriate level,The LDB730 Series loading dock bumper has been the LDB730 can be mounted to the dock face usingdesigned for the most demanding of industrial sites suitable concrete screw bolts so that it is flush.where nothing else is tough enough.It consists of three key elements – a heavy galvanised PART No. DESCRIPTIONsteel chassis which is rigidly bolted to the loading dock LDB730 Loading dock bumper for flush mounting 730 x 250mm with fixings (53kgs)face. An impact absorbing moulded rubber core which LDB730R Loading dock bumper riser bracket for low docks 150mm (6kgs)is housed in the chassis, and an 8mm thick galvanised LDB730S Loading dock bumper stand-off bracket for cantilevered docks 300mm (8.1kgs)floating strike face. This strike face is designed to KIT29 Fixing kit for LDB730 & LDB730Rallow the trucks to grind up and down on the bumper KIT30 Fixing kit for LDB730Swithout damage to the building structure.Note: The LDB730 is designed to withstand serious Copyright © 2018 Barrier Group Pty. Ltd.impacts and must be installed on a suitably reinforcedstructure.154 •••

Riser bracket Stand-off bracketRaised Mounting DOCK FLOOR Cantilevered DOCK FLOORLDB730R Mounting LDB730S ••• 155 If the dock floor height If the dock floor projectsis lower than ideal out over the buildingand there is the risk structure, the LDB730Sof the trailer or truck includes a telescopictray coming in over the stand-off bracket thatdock. The LDB730R extends back to theelevates the bumper building to provide lower150mm above the support to the loading dockdock floor to ensure the bumper. Fixings supplied.truck is safely captured.Fixings supplied.Copyright © 2018 Barrier Group Pty. Ltd.

Part No. description                Length x Width x Height Part No. description                Length x Width x HeightDR160 B-Section dock bumper 1000 x 55 x 160mm (5kgs) – Black/Yellow wp8022r Wall protector 800 x 32 x 220mm recycled rubber (2kgs) – Black/YellowPart No. description                Length x Width x Height Part No. description                   Length x HeightDR50300 D-Section dock bumper 300 x 50 x 50mm (0.56kgs) – Black dsr1 Dock-Safe receiver 355 x 150mm (12kgs) – BlackDR50610 D-Section dock bumper 610 x 50 x 50mm (1.12kgs) – BlackDR50910 D-Section dock bumper 910 x 50 x 50mm (1.7kgs) – BlackDR100300 D-Section dock bumper 300 x 100 x 100mm (2.3kgs) – BlackDR100610 D-Section dock bumper 610 x 100 x 100mm (4.6kgs) – BlackDR100910 D-Section dock bumper 910 x 100 x 100mm (6.9kgs) – BlackDR200900 D-Section dock bumper 900 x 200 x 200 mm (26kgs) – Black156 ••• Copyright © 2018 Barrier Group Pty. Ltd.

cp1090pe ACS-1 ACS-2cp1080r ACS-3 ACS-4Corner Protectors Anti Collision StripsCorner protectors are ideal for use in car parks to These impact protection foam buffers are designedprevent damage to vehicles from exposed structural to prevent physical injury from bumps and knocks tocolumns. CP1080R is made from recycled rubber, exposed edges, corners and low head height protrusionswhile CP1090PE is manufactured from blow moulded in the workplace. Manufactured from soft closed-cellpolyethylene. polyurethane in highly visible Black/Yellow stripes, they come with a peel and stick adhesive backing and are available in four profiles – Round 90º Corner, Rectangular, Square 90º Corner and Round Slotted Edge. Standard one metre lengths (see exact dimensions below) can be easily cut down to size with a sharp knife.Part No. DESCRIPTION Part No. description               CP1080R Corner protector 90 x 90 x 800mm recycled rubber (1.5kgs) – Black/Yellow ACS-1cp1090pe Corner protector 100 x 900mm LLDPE (0.76kgs) – Yellow ACS-2 Impact protection foam buffer (Angle) 1000mm long x 40mm diameter ACS-3 x 20mm deep – Black/Yellow ACS-4 Impact protection foam buffer (Rectangular) 1000mm long x 60mm wide x 20mm deep – Black/Yellow Impact protection foam buffer (90 degree) 1020mm long x 60mm wide x 40mm deep – Black/Yellow Impact protection foam buffer (Slot-shape) 1010mm long x 40mm diameter x 6mm slot – Black/YellowCopyright © 2018 Barrier Group Pty. Ltd. ••• 157 

W-Beam MenniRacking Protector Kits Racking Protector KitsW-Beam heavy duty racking end protectors minimises Menni racking end guards are used to minimise damagedamage to racking from forklifts and low speed to racking and product as a result of impact by forklifts,manoeuvring vehicles. They can also be used for other vehicles and trolleys. Moulded interlocking modules madeasset protection applications where a strong, visible from LLDPE are highly visible and virtually indestructible.barrier is required. The modular design is available in kit Available in two standard lengths to suit single or doubleform in three standard lengths, all 400mm high. width racking. Kits include high visibility post caps and Blanking plugs prevent debris build-up in mounting rail end boots holes and ensure solid module connectionPart No. description Part No. descriptionWRP1320 W-Beam racking protector 1320mm long (27.5kgs) – Galvanised mrp1100 Menni single racking end guard 1100mm long (3.6kgs) – YellowWRP1820 W-Beam racking protector 1820mm long (32.7kgs) – Galvanised mrp2200 Menni double racking end guard 2200mm long (6.4kgs) – YellowWRP2320 W-Beam racking protector 2320mm long (37.9kgs) – Galvanised Copyright © 2018 Barrier Group Pty. Ltd.158 •••

Menni BME-YAsset ProtectionMenni is a set of four modular components that can beplugged together in any combination to satisfy a widerange of end user applications. These applications mayinclude protecting physical assets by preventing vehiclesfrom coming into contact with them. Alternatively, Mennican be used where goods are stored near pedestrian zonesto prevent encroachment by forklifts and other vehicles. BMB-Y Part No. description BMT-Y BMB-Y BME-Y Menni end module L550 x W150 x H100mm – Yellow ••• 159  BMB-Y Menni body module L550 x W150 x H100mm – Yellow BMT-Y Menni T-intersection module L(a)300 x L(b)225 x W150 x H100mm – Yellow BMC-Y Menni 90 degree corner module L(a)225 x L(b)225 x W150 x H100mm – Yellow BMR Optional top reflector plugs – OrangeCopyright © 2018 Barrier Group Pty. Ltd.

Bull-Dog Galvanised andRacking Leg Protectors powder coated Safety YellowPallet racking legs are often supporting many tonnesof product. Protecting these legs is of vital importanceto avoid potential disasters caused as a result of impactby forklifts or trolleys. Bull-Dog racking leg protectorsare manufactured from heavy steel plate and bolt to thewarehouse floor independent of the racking, thereforeisolating any impact from the structural parts of theracking system.Part No. description                Length x Width x Heightbdb Standard Bull-Dog bracket – 210 x 150 x 400 x 5mm (5kgs) – HDG+PCbdb500 Big Foot Bull-Dog bracket – 250 x 150 x 500 x 6mm (8kgs) – HDG+PCbdb500c Corner Bull-Dog bracket – 180 x 180 x 500 x 6mm (5.4kgs) – HDG+PC BDB for standard pallet racking BDB500 for large pallet racking BDB500C for corner protection160 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Bull-Dog 235mmDownpipe Protectors 100mmDownpipe Protectors have been designed to guard cables 2.5mm 3mmand exposed pipes from the risk of damage caused bymanoeuvring forklifts and vehicle impacts. Pipe guards 135mmdefend your vehicle or forklift as well as your downpipes,without intruding on available car parking space.Galvanised and powder coated Safety Yellow.Part No. description 235mm 356mmBDP100 200mmBDP200 Bull-Dog 100mm downpipe protector (7.8kgs) – HDG+PC Bull-Dog 200mm downpipe protector (16kgs) – HDG+PC 100mm 2.5mm 3mm 245mm 135mm BDP100 for small downpipes BDP200 for large downpipesCopyright © 2018 Barrier Group Pty. Ltd. ••• 161 

Beauty, quality and functionality can all gohand in hand……just ask this little guy!From our stunning award winning Zephyr bikebollard which was designed and manufacturedin Australia from Tasmanian aluminium, to oursolid machined marine grade 316 stainless steelskateboard stops, we do our absolute bestto be 'purrrfect', no matter how challenging.Oh yes, and of course we also install andmaintain everything we sell.

Street Hardware

Bike Rail – Style 1 A sturdy mild steel and hot dip galvanised bike rail designed to accommodateGalvanised Steel two full size bicycles with the ability to lock both wheels and the frame for total security. Available with fully welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing. Can be used indoors or out. While galvanised is the standard finish, powder coating is also available on request.12 Powder coated colours available on request. Charges will apply.style PART No. DESCRIPTION Locking points 1 br1P-sm Bike rail rounded 850 x 800mm surface mount (9.2kgs) – Powder coated 1 br1g-sm Bike rail rounded 850 x 800mm surface mount (9.2kgs) – Galvanised Copyright © 2018 Barrier Group Pty. Ltd. 2 BR1P-BG Bike rail rounded 850 x 800mm below ground (9.2kgs) – Powder coated 2 BR1G-BG Bike rail rounded 850 x 800mm below ground (9.7kgs) – Galvanised164 •••

Bike Rail – Style 2 A sturdy bike rail manufactured from marine grade 316 stainless steel and designed316 Stainless Steel to accommodate two full size bicycles with the ability to lock both wheels and the frame for total security. Available with fully welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing. Can be used indoors or out.12style PART No. DESCRIPTION Locking points 1 br2SS-sm Bike rail – Style 2 surface mount (8kgs) – 316 stainless steel ••• 165  2 br2SS-bg Bike rail – Style 2 below ground (9.5kgs) – 316 stainless steelCopyright © 2018 Barrier Group Pty. Ltd.

Bike Rail – Style 3 A sturdy bike rail manufactured from marine grade 316 stainless steel and designed316 Stainless Steel to accommodate 2 full size bicycles with the ability to lock both wheels and the frame for total security. Available with fully welded base plates for surface mounting, or extended legs with starter bars for setting into a concrete footing. Can be used indoors or out. 12style PART No. DESCRIPTION Locking points 1 br3SS-sm Bike rail – Style 3 surface mount (7.2kgs) – 316 stainless steel 2 br3SS-bg Bike rail – Style 3 below ground (8.7kgs) – 316 stainless steel Copyright © 2018 Barrier Group Pty. Ltd.166 •••

Bike Rack – Style 4 A sturdy mild steel and hot dip galvanised bike rack designed to be wall mountedGalvanised Steel to accommodate 1 full size bicycle with the ability to lock one wheel and the frameWall Mounted for total security. The bike is suspended on plastic coated prongs to protect the rims from possible damage. Can be used indoors or out. While galvanised is the standard finish, powder coating is also available on request. Powder coated colours available on request. Charges will apply. Locking points PART No. DESCRIPTION br4G-WM Bike rail – Style 4 wall mounted (3.8kgs) – Galvanised br4P-WM Bike rail – Style 4 wall mounted (3.8kgs) – Powder coatedCopyright © 2018 Barrier Group Pty. Ltd. ••• 167 

Bike Rack – Schoolies A multi-bike bike rack for casual bike storage, manufactured from mild steelGalvanised Steel and hot dip galvanised. The Schoolies is designed to be relocatable and can flat pack for easy transportation for various events. The Schoolies can accommodate 8 bikes of varying sizes, with the ability to lock one wheel and the frame, and is only available in a hot dip galvanised finish.PART No. DESCRIPTIONbrs8g Bike rack – Schoolies 8 bike (52kgs) – Galvanised168 ••• Copyright © 2018 Barrier Group Pty. Ltd.

The Zephyr is so much more than just a bike rack... IT’S AN ARCHITECTURAL STATEMENT PART No. A B C Kgs FINISH BZ-POL 845 224 394 18 Polished alloy BZ-CUS 845 224 394 18 Custom powder coat BZF-SM Zephyr mounting kit – Surface mount KIT20 Fixing kit for zephyr – In-ground Note: All dimensions in mm – (A) Height, (B) Width, (C) Depth.Copyright © 2018 Barrier Group Pty. Ltd. ••• 169 

Bicycle Path Designed for use at pedestrian and cyclist crossings to allow the user to hold on to or restHolding Rails against while waiting for traffic conditions to change. They are hot dip galvanised prior to& Target Boards being finished with a Yellow powder coat. They come complete with Class 2 Red/White reflective bands. Holding rails are available in two designs, rail only or rail with target board. Target boards are used where a holding rail is mounted at right angles to a path. In-ground sleeves with gibb keys are available in either core drilled or new concrete models. 5 1 Class 2 reflective tape STYLE Part No. description 3 1 HR800-BG Holding rail 800 x 1000mm (13kgs) 1 HR1200-BG Holding rail 1200 x 1000mm (16kgs) 2 hr800tb-bg Holding rail 800 x 1000mm with target board (13kgs) 2 hr1200tb-bg Holding rail 1200 x 1000mm with target board (16kgs) 3 SPS60-CD Sign post sleeve with gibb key (2.5kgs) – Core drilled 4 SPS60-NC Sign post sleeve with gibb key (2.7kgs) – New concrete 5 c140sm-hr Holding rail bollard 140 x 1200mm (25.4kgs) – Surface mount 6 c140bg-hr Holding rail bollard 140 x 1200mm (29.6kgs) – Below ground 7 bsl140-hr Holding rail removable bollard 140 x 1200mm (21kgs) 8 bsl140s-nc Removable bollard 140mm sleeve (10kgs) – New concrete + bpl2 High security 9mm shielded padllock with 2 keys170 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Bicycle Path The prevention of illegal vehicle access is critical to avoiding damage to pathways andAccess Bollards lightweight bridge structures, particularly when they have been designed only for bicycle and pedestrian use. These two pages offer a choice of bollards designed to deny vehicle access. They are all 140mm in diameter and 1200mm tall in either surface mount, below ground or removable designs with locking sleeves. They are hot dip galvanised, prior to being finished with a Yellow powder coat, and come complete with Class 2 Red/White reflective bands. 7 62 1200mm 4Copyright © 2018 Barrier Group Pty. Ltd. 8 Sleeve only ••• 171 

Skateboard Stops Stop skateboarders in their tracks with our skateboard studs. They are designed to prevent the damage caused to street furniture and save you from costly repair bills. They are made to the highest possible quality, machined from solid marine grade 316 stainless steel. Available in seven styles and two sizes for different applications, they are economical to buy and simple to install using basic tools that are readily available to most maintenance and installation contractors. Solid marine grade 316 stainless steel SK20F-SS SK30F-SS SK30FC-SSSkateboard stud 20mm diameter Skateboard stud 30mm diameter Skateboard stud 30mm diameter – Flat top with 50mm dia. collar – Flat top – Flat top SK20D-SS SK30D-SS SK30DC-SS SK23R-SSSkateboard stud 20mm diameter Skateboard stud 30mm diameter Skateboard stud 30mm diameter Skateboard stud 23mm diameter – Dome top with 50mm dia. collar – Dome top – Dome top – Round ball172 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Mulch & Mow Rings Linebacker Drive Through ProtectionMulch & Mow Rings are supplied in two halves for fittingaround larger established trees. Simply bolt together Developed in response to a growing number of accidentalwith the fixings supplied. Installation is quick and drive through accidents in retail areas, our Linebackersimple (easy to relocate) with each ring held securely bollards have been designed for use where maximumin place by 4 off 300mm galvanised steel spikes protection is required but space is at a premium.(supplied). Available in two models, the core drilled LSC90-CD and the surface mount LBR90-SM. Mulch & Mow Rings enhance a neat and tidy landscape Read more about our Linebackers on pages 20-21.Part No. description                 Fixings supplied PART No. DESCRIPTIONMM600G Mulch & Mow tree ring 600mm diameter (7.1kgs) LSC90-CD Linebacker solid core bollard 90mm core drilled – PC WhiteMM900G Mulch & Mow tree ring 900mm diameter (16kgs) LBR90-SM Linebacker brace reinforced bollard 90mm surface mount – PC WhiteMM1200G Mulch & Mow tree ring 1200mm diameter (21kgs)SPIKES Additional 300 x 12mm galvanised spike (each)Copyright © 2018 Barrier Group Pty. Ltd. ••• 173 

Careful where you step! We all have aresponsibility for workplace health andsafety. Accidents from slips, trips and fallsconstitute around 19% of all workplaceinjuries. While we don’t recommend dealingwith unwanted snakes, we can certainly helpyou with the supply and installation of tactileindicators, anti-slip floor panels, stair treads,rubber floor mats and an extensive range ofdock ramps and cable covers.

UNDER FOOT

Tactile Indicators (TGSI’s)Supply and InstallationTactile Indicators assist people who are blind orvision impaired to orientate themselves in the builtenvironment. TGSI’s should be installed to provideguidance and/or warning of an obstruction or hazard.Barrier Group can supply and install a range of TGSI’sthat are slip rated to AS/NZS 4586, and which meetthe required safety standards, including the BuildingCode of Australia (BCA) and AS/NZS 1428 Access forpeople with disabilities. Note: TGSI's are GST exempt.Luminance ContrastAustralian Standard 1428.4-2009 defines LuminanceContrast as ‘the light reflected from one surface orcomponent, compared to the light reflected fromanother surface or component’. It is not simply thedifference in the colour contrast, but the differencein the light reflective properties of each colour.Appropriate luminance contrast assists people withlow vision to navigate and identify features suchas doorways and information signage – as well ashazardous areas such as stairway, ramps and areaswith a danger of vehicle impact.TGSI Layout Template Part No. description            Length x Width x Thickness BTT3060 Tactile layout template 600 x 300 x 1.6mm zinc sheetThis laser cut drilling template makes layout and drillinga simple, quick and accurate task. Manufactured from Copyright © 2018 Barrier Group Pty. Ltd.1.6mm thick zinc sheet which can be reused, unlikeplastic templates which are quickly destroyed by drillingand lose their accuracy. The 2-in-1 template has pilotholes for both warning tactile studs and the 5 pinstainless steel directional bars, reducing the number oftemplates required.176 •••

Integrated TGSI’s Discrete TGSI’sIntegrated tactiles are easy and quick to install, simply Individual tactiles are available in 316 stainless steelprepare the surface, peel and stick. The durable or durable polyurethane. No messy adhesives necessary,polyurethane tiles are designed to be used immediately. just drill and press the step into the mounting hole. Installation a problem? Let us do it....problem solved!Composite TGSI’s ••• 177 Composite tactiles are manufactured from 316 stainlesssteel with a carborundum insert. Simply drill and pressfit for a high end look with maximum slip resistance.Copyright © 2018 Barrier Group Pty. Ltd.

Warning tactile round 35mm 25mm  •  Concentric circle  •  Stem with plug 5mm  •  Drill and press fit 20mmBTW101-SS 316 stainless steel (100pk)Warning tactile round 8.3mm  •  Stem with plug BTW101-SS  •  Drill and press fit 35mm 25mm 5mmB TW102-CB Black carborundum infill 20mm  – 316 stainless steel (100pk)BTW102-CY Yellow carborundum infill – 316 stainless steel (100pk)Warning tactile round 8.3mm BTW102-CB/CY  •  Linear pattern  •  Stem only 35mm  •  Drill and press fit 25mmBTW103-TPUB Black TPU (100pk) 5mmBTW103-TPUY Yellow TPU (100pk) 20mmWarning tactile round 8.3mm BTW103-TPUB/Y  •  Stem with plug  •  Drill and press fit 35mm 25mmBTW105-PVDB Black PVD – 316 stainless steel (100pk) 5mm 20mm178 ••• 8.3mm BTW105-PVDB Copyright © 2018 Barrier Group Pty. Ltd.

Directional tactile bar Linear pattern / Stem only / Drill and adhere BTd101-SS 316 stainless steel (20pk) 290mm 280mm 5mm 5mm 120mm 120mm 13mm 7mm BTD101-SS 20mm Directional tactile bar Linear pattern / Stem only / Drill and adhere 8.3mm BTD103-TPUB Black TPU (20pk) 3mm BTD103-TPUY Yellow TPU (20pk) 290mm 280mm 65mm 65mm 65mm 65mm BTD103-TPUB/Y Warning tactile pad Peel and stick pad btw104-tpub Black TPU (each) btw104-tpuC Cream TPU (each) btw104-tpug Grey TPU (each) btw104-tpuY Yellow TPU (each) 300mm 6.5mm BTW104-TPUB/C/G/Y Directional tactile pad Peel and stick pad   btd104-tpub Black TPU (each) btd104-tpuY Yellow TPU (each) 300mm 6.5mm 3mm BTD104-TPUCopyright © 2018 Barrier Group Pty. Ltd. ••• 179 

83mm 37mm Yellow model BSN101 76mm 10mm Yellow model BSN102 65mm 10mm Black model BSN103Architectural 10mm 75mmStair Nosing 52mm Yellow modelDesigned to comply with AS1428.1 Design for Access and Mobility BSN104Part:1 General Requirements for Access-New Building Work. BarrierGroups stair nosings are available in a range of profiles for most 75mmsituations. 52mmThey are manufactured from non-corrosive hard wearing anodisedaluminium extrusions and come in standard 3.62 metre lengths. 10mmAlternatively, we can provide pre-cut and drilled lengths to yourrequirements, or a complete supply and install service. BSN104 Black model180 ••• Copyright © 2018 Barrier Group Pty. Ltd.

stair nosing Black model Yellow model Black model   •  Natural anodised aluminium Black model Yellow model   •  Ramped edge Black model Natural model   •  Glue and/or screw Black model Yellow model   •  Standard length 3.62 metres Yellow model BSN101-CB Carborundum infill – Black ••• 181  BSN101-CY Carborundum infill – Yellow stair nosing   •  Natural anodised aluminium   •  Square edge   •  Glue and/or screw   •  Standard length 3.62 metres BSN102-CB Carborundum infill – Black BSN102-CY Carborundum infill – Yellow stair nosing   •  Corrugated   •  Ramped edge   •  Glue and/or screw   •  Standard length 3.62 metres BSN103-AB Anodised aluminium – Black BSN103-AN Anodised aluminium – Natural stair nosing   •  Natural anodised aluminium   •  Ramped edge   •  Glue and/or screw   •  Standard length 3.62 metres BSN104-FRPB FRP insert – Black BSN104-FRPY FRP insert – Yellow stair nosing   •  Natural anodised aluminium   •  Ramped edge   •  Glue and/or screw   •  Standard length 3.62 metres BSN105-pvcb PVC insert – Black BSN105-pvcY PVC insert – YellowCopyright © 2018 Barrier Group Pty. Ltd.

Industrial IndustrialFRP Stair Nosing FRP Floor PlatesReady to install, pre-finished stair nosing prevents Pre-finished, ready to install safety floor plates are designedslip accidents in the harshest of weather conditions. to prevent slip accidents in the most harsh and extremeManufactured from a composite fibreglass, the units conditions. Manufactured from a composite fibreglass,are easily fitted over existing walkways to create a safer the units are easily fitted over existing walkways to createpassage of travel for pedestrians. Can be cut down to size the toughest and most durable safety solution available.if required. Tested to comply with AS 4586:2013. Can be cut down to size if required. Tested to comply with AS 4586:2013.Part No. description         Length x Depth x Return x Thicknessbsn45075 FRP stair nosing 450 x 76 x 30 x 4mm – Yellow Part No. description            Length x Width x Thicknessbsn60075 FRP stair nosing 600 x 76 x 30 x 4mm – Yellow BFP200600 FRP floor plate 200 x 600 x 4mm – Yellowbsn75075 FRP stair nosing 750 x 76 x 30 x 4mm – Yellow BFP200900 FRP floor plate 200 x 900 x 4mm – Yellowbsn90075 FRP stair nosing 900 x 76 x 30 x 4mm – Yellow BFP600900 FRP floor plate 600 x 900 x 4mm – Yellowbsn103075 FRP stair nosing 1030 x 76 x 30 x 4mm – Yellow BFP6001200 FRP floor plate 600 x 1200 x 4mm – Yellowbsn120075 FRP stair nosing 1200 x 76 x 30 x 4mm – Yellow BFP12001200 FRP floor plate 1200 x 1200 x 4mm – Yellowbsn450150 FRP stair nosing 450 x 152 x 30 x 4mm – Yellow FIX1172 ST/ST saddle assembly (1 x saddle, M6 x 35mm bolt and M6 nut)bsn600150 FRP stair nosing 600 x 152 x 30 x 4mm – Yellowbsn750150 FRP stair nosing 750 x 152 x 30 x 4mm – Yellowbsn900150 FRP stair nosing 900 x 152 x 30 x 4mm – Yellowbsn1030150 FRP stair nosing 1030 x 152 x 30 x 4mm – Yellowbsn1200150 FRP stair nosing 1200 x 152 x 30 x 4mm – YellowFIX1172 ST/ST saddle assembly (1 x saddle, M6 x 35mm bolt and M6 nut)182 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Anti-Slip Anti-SlipSelf-Adhesive Tape Rubber Floor MatsReduce accidents due to slipping with our durable Our floor mats are designed to provide an anti-slip andself-adhesive tape with grit surface in Black, Yellow anti-fatigue surface. They have a wide range of domestic,or Back/Yellow colours. Can be applied to any clean industrial, commercial and agricultural applications.dry surface like stair treads, ramps or hazardous floors. The anti-fatigue floor mat is manufactured from hardSuitable for indoor and outdoor applications. wearing Black natural rubber and measures 910 x 1520 x 13mm. The oil resistant floor mat is manufactured from hard wearing rubber and measures 910 x 1520 x 10mm (this mat is coloured Red to distinguish i'st has oil resistant properties).Part No. DESCRIPTION Part No. description            Length x Width x ThicknessAT50B Anti-Slip tape 50mm x 5 metre – Black fm3660 Anti-Fatigue floor mat 1520 x 910 x 13mm – Black (8.9kgs)AT50B20 Anti-Slip tape 50mm x 20 metre – Black fm3660-R Oil resistant floor mat 1520 x 910 x 10mm – Red (8.9kgs)AT50Y Anti-Slip tape 50mm x 5 metre – YellowAT50Y20 Anti-Slip tape 50mm x 20 metre – Yellow ••• 183 AT50YB Anti-Slip tape 50mm x 5 metre – Black/YellowAT50YB20 Anti-Slip tape 50mm x 20 metre – Black/YellowAT100B Anti-Slip tape 100mm x 5 metre – BlackAT100B20 Anti-Slip tape 100mm x 20 metre – BlackAT100Y Anti-Slip tape 100mm x 5 metre – YellowAT100Y20 Anti-Slip tape 100mm x 20 metre – YellowCopyright © 2018 Barrier Group Pty. Ltd.

Portable Trolley Ramp Portable Trolley RampPTR1 PTR2The portable trolley ramp is manufactured from Portable trolley ramp manufactured from durable YellowYellow injection moulded, textured plastic floor plate. polyethylene plastic that includes a top anti-slip patternAvailable for use where there is a height difference of design and steel bar reinforced backing. Available for useup to 130mm. Rated to 300kgs, the light weight where there is a height difference of up to 200mm andmoulded construction makes it very portable and is rated to 300kgs. Features fixing holes for permanenteasily handled by one person. use and handles for easy carrying.Strong and lightweight moulded construction Steel reinforcing bars for increased strengthPart No. description             Length x Width x Height Part No. description             Length x Width x Heightptr1 Portable trolley ramp 700 x 600 x 85mm – Yellow (4.2kgs) ptr2 Portable trolley ramp 700 x 1300 x 85mm – Yellow (13kgs)184 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Trolley Ramp The ATR900 is a robust trolley ramp manufactured from 6mm thick aluminium textured floorMedium Duty plate with a total weight of approximately 15kgs. It is designed for pedestrian or hand trolley use with a load limit of 300kgs. With the ability to bridge changes in height up to 200mm, it is ideal around loading docks. Supplied with two stainless steel locating pins that secure the ramp in place, and convenient built-in carry handles to facilitate handling by one person. Not recommended for powered equipment or vehicles. PART No. max height difference length width thickness capacity weight atr-900 200mm between levels 1025mm 900mm 6mm 300kgs 15kgs Locating pins supplied, can be fitted either end of the ramp to attach to the dock or vehicle. ST/ST locating pins prevent slipping Up to 200mm change in levels Convenient carry handle ••• 185 Copyright © 2018 Barrier Group Pty. Ltd.

Aluminium A common problem on loading docks is bridging the gap between a truck and the dock orDock Plates warehouse floor. Not all trucks are the same height, and the height of the trailer floor within a truck can vary according to how heavily the truck is laden. Thus, there is not only a gap to bridge, but a height difference to overcome. Dock plates are used for lighter loads such as hand trolleys, pallet jacks or foot traffic. They must NEVER be used with powered equipment such as forklifts. PART No. max height difference length width thickness capacity weight DP-4848 125mm between levels 1220mm 1220mm 10mm 1075kgs 45kgsUse with hand trolleys and pallet jacks Locating legs prevent slipping Fitted with carry handles186 ••• Copyright © 2018 Barrier Group Pty. Ltd.