Barrier Group 2018 Product & Services Guide

BFEP-BG End post – below ground BFTP-BG Through post – below ground BFCP-BG Corner post – below groundBFEP-SM End post – surface mount BFTP-SM Through post – surface mount BFCP-SM Corner post – surface mountbftp-af Adjustable foot – inline bftp-af Adjustable foot – inline bfcp-af Adjustable foot – cornerbftp-S90 BFCB BFB25 Bend 90° x 25 N.B. BFB25-45 Bend 45° x 25 N.B. BFEP-WB BFTP-WBThrough post Closure bend BFB32 Bend 90° x 32 N.B. BFB32-45 Bend 45° x 32 N.B.– side mount 90° angle W-Beam/Ball-Fence W-Beam/Ball-Fence end post through postCopyright © 2018 Barrier Group Pty. Ltd. ••• 37 

BFTP-Sm30 BFTP-S30R BFTP-S30L BFcb30Through post 30° angle Through post 30° angle Through post 30° angle Closure bend– surface mount – right side mount – left side mount 30° angle BFTP-Sm45 BFTP-S45R BFTP-S45L BFcb45 Through post 45° angle Through post 45° angle Through post 45° angle Closure bend – surface mount – right side mount – left side mount 45° angle38 ••• Copyright © 2018 Barrier Group Pty. Ltd.

BFG-P Ball-Fence gate (includes 1.5 metre hoop) – Powder coated aluminiumBFGPWB-SM BFGP90SM bfg Ball-Fence gate (includes 1.5 metre hoop) – Natural aluminiumBall-Fence gate post 90mm surface mount bollard – HDG+PC dgl43-g Double gate latch – Galvanised(Gate fixings supplied) BFGP90SM-G (shown) 90mm surface mount bollard – HDG (Gate fixings supplied)BFHR Hand rail 32 N.B. x 6 metres BFSJ32 Slip joiner 32 N.B.BFKR Knee rail 25 N.B. x 6 metres BFSJ25 Slip joiner 25 N.B. BFTP Taper pin for joiner BFTB-G Ball-Fence toe board 100 x 6 x 6 metres BFTBSC-G Toe board saddle clamp BFTBCC-G Toe board corner clampCopyright © 2018 Barrier Group Pty. Ltd. ••• 39 

ER-Rail ER-Rail Gates, page 62.Hand Rail System Think a heavy duty rail would suit you better? Page 42.The ER-Rail system is a warehouse safety barrier thatis an economical and practical solution to control the Copyright © 2018 Barrier Group Pty. Ltd.movement of pedestrians. Rails are sold separately withoptional surface mount or below ground posts, brackets(fixings supplied) and accessories available to allow forpost and wall mounted installation. Designed to complyto AS 1657:2013 for balustrades and handrails wheninstalled using ER-Rail mounting brackets (page 41).PART No. descriptionER8030-2PA ER-Rail 80 x 30mm x 2mtr with end caps – Powder coated aluminiumER8030-3PA ER-Rail 80 x 30mm x 3mtr with end caps – Powder coated aluminiumER8030-6PA ER-Rail 80 x 30mm x 6mtr with end caps – Powder coated aluminiumERSJ20 ER-Rail connectorsER8030-IS ER-Rail infill strip 2 metres long – Natural anodised aluminiumERG1200-PA ER-Rail gate assembly (see page 62)c63sme Surface mount bollard – 63.5 x 1.6 x 1000mm (3.7kgs)c63bge Below ground bollard – 63.5 x 1.6 x 1000mm (3.7kgs)c90smE Surface mount bollard – 90 x 3.2 x 1000mm (8.2kgs)c90bgE Below ground bollard – 90 x 3.2 x 1000mm (8.8kgs)40 •••

Part No. DESCRIPTION Part No. DESCRIPTIONERK-A E R-Rail knuckle assembly – Cast aluminium RPB63-A ER-Rail bracket for 63.5mm post RPB90-A ER-Rail bracket for 90mm postPart No. DESCRIPTION Part No. DESCRIPTIONRWB63-A ER-Rail to wall mounting bracket TB100-A 100mm Toe-board – 6 metres (13kgs) TB150-A Heavy 150mm Toe-board – 6 metres (27kgs) TBJ200 Toe-board joiner TBC63-A Toe-board clamp for 63mm post TBC90-A Toe-board clamp for 90mm postCopyright © 2018 Barrier Group Pty. Ltd. ••• 41 

PR-RailHand Rail SystemPR-Rail is an aluminium railing system designed for usein car parks, factories and shopping centres or anywherethat requires vehicle and pedestrian separation. Rails aresold separately with optional surface mount or below groundposts and brackets. A range of accessories are also available.Industrial gates and rails comply with AS 1657:2013 wheninstalled using mounting brackets (page 43).PART No. description PR-Rail Gates, page 63.PR14540-2PA PR-Rail 145 x 40mm x 2mtr with end caps – Powder coated aluminium Looking for a more economical version? Page 40.PR14540-3PA PR-Rail 145 x 40mm x 3mtr with end caps – Powder coated aluminium Copyright © 2018 Barrier Group Pty. Ltd.PR14540-4PA PR-Rail 145 x 40mm x 4mtr with end caps – Powder coated aluminiumPR14540-5PA PR-Rail 145 x 40mm x 5mtr with end caps – Powder coated aluminiumPR14540-6PA PR-Rail 145 x 40mm x 6mtr with end caps – Powder coated aluminiumPRSJ32 PR-Rail connectorsPRG1500-PA PR-Rail gate assembly (see page 63)c63sme Surface mount bollard – 63.5 x 1.6 x 1000mmc63bge Below ground bollard – 63.5 x 1.6 x 1000mmc90sm Surface mount bollard – 90 x 5 x 1000mmc90bg Below ground bollard – 90 x 5 x 1000mm42 •••

Part No. DESCRIPTION Part No. DESCRIPTIONPRK-A PR-Rail knuckle assembly – Cast aluminium RPB63-A PR-Rail bracket for 63.5mm post RPB90-A PR-Rail bracket for 90mm postPart No. DESCRIPTION Part No. DESCRIPTIONRWB90-A PR-Rail to wall mounting bracket TB100-A 100mm Toe-board – 6 metres (13kgs) TB150-A Heavy 150mm Toe-board – 6 metres (27kgs) TBJ200 Toe-board joiner TBC63-A Toe-board clamp for 63mm post TBC90-A Toe-board clamp for 90mm postCopyright © 2018 Barrier Group Pty. Ltd. ••• 43 

De-Fence De-Fence Swing Gate, page 68.Safety Fence System De-Fence Sliding Gate, page 69.Machinery guarding and zoning system known as theDe-Fence Safety Fence System. Typically installed in Copyright © 2018 Barrier Group Pty. Ltd.warehouses and factories, it provides safety guardingfrom active machines and pedestrian safety againstmoving forklifts and vehicles.The system comprises a range of standard panel lengthswith the option of welded mesh or polycarbonate infill,either single or double height.De-fence steel posts are manufactured from 75 x 75 x2.5mm thick RHS tube. They are pre-drilled on all foursides to accept our range of steel brackets and finishedin highly visible Yellow powder coat. They are availablein two standard heights with a choice of three differentwelded base plates.Designed to comply with AS 4024.1–2014 Series Safetyof Machinery.44 •••

Part No. description     Fixings supplied Part No. description     Fixings supplied Part No. description    Fixings supplieddfp1300 dfp1300E dfp1300gDFP2460 De-Fence standard post inline DFP2460E De-Fence end post offset DFP2460g De-Fence gate post centred – 1300 x 75 x 75mm (10.7kgs) – 1300 x 75 x 75mm (10.7kgs) – 1300 x 75 x 75mm (10.7kgs) De-Fence standard post inline De-Fence end post offset De-Fence gate post centred – 2460 x 75 x 75mm (16.5kgs) – 2460 x 75 x 75mm (17kgs) – 2460 x 75 x 75mm (17kgs)Part No. description Part No. descriptiondfp2000m De-Fence mesh infill panel – 2000mm long (18kgs) dfp2000p De-Fence polycarbonate infill panel – 2000mm long (18kgs)dfp1700m De-Fence mesh infill panel – 1700mm long (16kgs) dfp1700p De-Fence polycarbonate infill panel – 1700mm long (16kgs)dfp1500m De-Fence mesh infill panel – 1500mm long (15kgs) dfp1500p De-Fence polycarbonate infill panel – 1500mm long (15kgs)dfp1200m De-Fence mesh infill panel – 1200mm long (13kgs) dfp1200p De-Fence polycarbonate infill panel – 1200mm long (13kgs)dfp1000m De-Fence mesh infill panel – 1000mm long (10kgs) dfp1000p De-Fence polycarbonate infill panel – 1000mm long (10kgs)dfp750m De-Fence mesh infill panel – 750mm long (8kgs) dfp750p De-Fence polycarbonate infill panel – 750mm long (8kgs)dfp500m De-Fence mesh infill panel – 500mm long (6kgs) dfp500p De-Fence polycarbonate infill panel – 500mm long (6kgs)DF-GKP Optional gate kick plate DF-GKP Optional gate kick plateCopyright © 2018 Barrier Group Pty. Ltd. ••• 45 

CUSTOM GUARDING:We understand that sometimes terms like‘modular’ or ‘standard’ just don’t workfor every guarding application. We alsounderstand that you may not be awareof your obligations, or where to turn forcustom made machinery guarding.At Barrier Group we have the experienceand the expertise to help. Call now andour consultants will come to you. Part No. description Part No. description DF-SPB Standard panel bracket kit DF-APB Adjustable panel bracket kit Part No. description Part No. description DF-PCB Panel connector bracket kit DF-SGB Self-closing gate bracket kit46 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Part No. description Part No. description Part No. descriptionDF-CP De-Fence gate connector pin DF-PJ De-Fence panel joiner extrusion DF-GKP De-Fence gate kick platePart No. description Part No. description Part No. descriptionDF-GS De-Fence gate stop DF-LL De-Fence lockable gate latch DF-LB De-Fence lockable drop boltCopyright © 2018 Barrier Group Pty. Ltd. ••• 47 

Load-Safe-Q Part No. descriptionPortable Truck Barrier LSQ2130 Load-Safe-Q panel 900 x 2130mm, 2 posts inc. (18kgs) – Hi-vis Orange LSB1 Load-Safe aluminium bracket (sold separately)Designed for rapid deployment onto truck trays to LSP1200 Replacement FRP Load-Safe post 1200mm each (1.15kg)prevent employees from dangerous falls at transportloading areas. Installation simply requires two Load-Safealuminium brackets hooked onto the tie-down rails, priorto accepting the panel and locking it into place. Bracketscannot be unhooked from the tie-down rail without firstremoving the panel. Panels are connected to each otherfrom the top by an adjustable snap latch. 2130mm900mm LSB1 Load-Safe bracket Lightweight FRP posts48 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Dock-Safe-Q Part No. descriptionPortable Dock Barrier dsq2130 Dock-Safe-Q panel 900 x 2130mm, 2 posts inc. (14kgs) – Hi-vis Orange DSR1 Dock-Safe receiver with fixings (12kgs) – sold separatelyLight weight rapid deployment temporary safety barriersystem to prevent people tripping or falling from elevatedloading docks. Comprising of two parts, the Dock-Safereceiver is mounted directly to the face of the loadingdock to receive the Dock-Safe-Q panel and act as a heavyduty dock bumper. Panels can be quickly removed andreplaced when required for vehicle access.Alternatively, panels can be core drilled directly into thedock floor without the need for the DSR1. 2130mm1000mm DSR1 Dock-Safe receiver Galvanised steel posts ••• 49 Copyright © 2018 Barrier Group Pty. Ltd.

Post-Q Part No. descriptionFixed Fence System pq2130 Post-Q fence panel 900 x 2130mm, 2 posts inc. (14kgs) – Hi-vis Orange qfp-sm Additional Q-Fence posts with fixingsPost-Q is a modular pedestrian separation fence systemthat can absorb minor impacts, is non-conductive,corrosion and abrasion resistant and can be used indoorsand outdoors. Using the galvanised steel posts provided,it is simple to install with a high level of design flexibility.Strong posts and moulded polyethylene panels with solidHi-vis Orange colour, ensure an extremely durable fencesystem that's highly visible, won’t fade, rot, rust or crack. 2130mm1000mm Galvanised steel post Panel linking system50 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Menni-Q Part No. descriptionFixed Fence System mq2130 Menni-Q fence panel 900 x 2130mm, 2posts inc. (19.5kgs) – Hi-vis Orange BME-Y Menni end module with fixings – YellowMenni-Q is a modular pedestrian separation fence system BMB-Y Menni body module with fixings – Yellowthat is impact absorbing, non-conductive, corrosion and BMT-Y Menni T-intersection module with fixings – Yellowabrasion resistant and can be used indoors and outdoors. BMC-Y Menni 90 degree corner module with fixings – YellowThe modular nature of Menni-Q provides a high degreeof design flexibility. The components are moulded fromLinear Low Density Polyethylene (LLDPE) with solidcolour. This extremely durable fence system is highlyvisible and won’t fade, rot, rust or crack. 2130mm1000mm Menni modules Continuously linked ••• 51 Copyright © 2018 Barrier Group Pty. Ltd.

Crowd-Q Part No. descriptionCrowd Control Barrier cq2130 Crowd-Q event fence 1000 x 2130mm, 2 posts inc. (13kgs) – Hi-vis Orange pp1050 Q-Fence stackable forklift stillage – holds 20Crowd-Q is an interlocking freestanding barrier forcrowd management. Panels link together to createcontinuous barricading for festivals, parades, sportingevents and work sites. Manufactured from super toughand lightweight moulded polyethylene in Hi-vis Orange,each panel includes stacking dimples, built-in reflectivechannels and low profile feet that rotate for transportor stacking. Handling and transporting panels is madesimple and efficient with optional forklift stillages thathold up to 20 panels. 2130mm1000mm Rotating feet Forklift stillage52 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Event Fence Part No. descriptionCrowd Control Barrier EF25/200 Standard event fence 1100 x 2200mm, 2 feet inc. (15kgs) – HDG pp1050 Event fence stackable forklift stillage – holds 30Portable barrier featuring interlocking freestanding fencepanels. Simply link panels together to create continuousbarricading for festivals, parades, sporting events orwork sites. Optional forklift stillage makes storing andtransporting up to 30 panels a simple and efficient task. 2200mm1100mm Detachable foot Forklift stillage ••• 53 Copyright © 2018 Barrier Group Pty. Ltd.

Plastic Fence 12kgsCrowd Control Barrier Part No. descriptionA low cost portable and stackable plastic fence for PEF2000crowd control or closing off worksites. Manufactured Plastic fence barrier with rubber feet 2000 x 1000mm (12kgs)from durable polyethylene in a high visibility Orange or PEF2000Y – Hi-vis Orange with reflective panelsYellow colour with hi-vis reflective panel on one side. pp1050Black feet made from recycled rubber rotate to the flat Plastic fence barrier with rubber feet 2000 x 1000mm (12kgs)position for stacking. Handling and transporting panels – Hi-vis Yellow with reflective panelsis made simple and efficient with optional forkliftstillages that hold up to 20 panels. Can be used with Q-Fence stackable forklift stillage – holds 20PEF1100 (see opposite). 2000mm1000mm Rotating feet Forklift stillage54 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Plastic Fence 9kgsCrowd Control Barrier Part No. descriptionA low cost portable and stackable plastic fence for PEF1100crowd control or closing off worksites. Manufactured PEF1100Y Plastic fence barrier with rubber feet 1100 x 1000mm (9kgs)from durable polyethylene in a high visibility Orange or – Hi-vis Orange with reflective panelsYellow colour with hi-vis reflective panel on one side.Black feet made from recycled rubber rotate to the flat Plastic fence barrier with rubber feet 1100 x 1000mm (9kgs)position for stacking. Can be used with PEF2000 (see – Hi-vis Yellow with reflective panelsbelow). 1100mm1000mm PEF1100 PEF2200Copyright © 2018 Barrier Group Pty. Ltd. ••• 55 

Like a bull at a gate we often charge intosituations without considering theconsequences. At Barrier Group, we offera wide range of industrial gates that denyaccess, protect from falls and separatepedestrians and vehicles. Choose from swing,boom or sliding gates as your needs dictate.It’s worth noting that all the gates in thiscatalogue have been developed in response tospecific customer needs. What do YOU need?

INDUSTRIAL GATES

Mezzanine Description: Roll-over safety gateRoll-Over Gate Operation: Balanced pivoting designThe Roll-Over Mezzanine gate works on the simple principleof an evenly weighted pivoting frame. When one side is Construction: Aluminium frame and railsopen the other is closed. It is available in two standardsizes but can be customised if necessary. Features include Gate Swing: 45 degrees verticala dampened operation to take out any sudden movement.Note: Flat packed for delivery, assembly required. Opening width: 1500 or 2600mm Opening height: 2000mm Working Depth: 1500 or 2600mmPart No. description                  Width x Depth Mounting Type: Surface mountedMZR1515 Roll-over mezzanine gate 1500 x 1500mm (84.5kgs)MZR2615 Roll-over mezzanine gate 2600 x 1500mm (101.5kgs) Rail Type: Powder coated aluminium 145 x 40mm Overhead Clearance: 2200mm58 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Mezzanine Description: Dual action safety gateDouble-Boom Gate Operation: Geared with spring assistanceThe Mezzanine Double-Boom gate operates by using twosets of opposed and interconnected arms to provide fall Construction: Steel frame with aluminium boom armsprotection on elevated work areas. One side of the gate isalways down restricting staff access to the exposed edge. Gate Swing: 90 degrees verticalThe operation of the arms is spring assisted with autolatching when in the loading position. Opening Width: Customisable to 2600mm Working Depth: Customisable to 2600mm Mounting Type: Surface mountedPart No. description                   Width x Depth Rail Type: Powder coated aluminium 145 x 40mmMZ1500-A Mezzanine double-boom gate 1500 x 1500mm (107kgs)MZ2000-A Mezzanine double-boom gate 2000 x 1500mm (112.5kgs) Overhead Clearance: Dependent on working widthCopyright © 2018 Barrier Group Pty. Ltd. ••• 59 

Dock-Safe Description: Manual boom gate for open doorwaysManual Boom Gate Operation: Lift with spring assistanceThe Dock-Safe gate reduces the risk of falls fromelevated loading docks when the roller door is in the Construction: Steel posts with aluminium railopen position. Usable anywhere access should becontrolled. An adjustable internal spring provides lift Gate Swing: 90 degrees verticalassistance. Gate Stop: Built-in Receiver Post: Included (optional wall mount receiver)Part No. description Maximum Opening: 5000mm wideDSBG5000 Dock-Safe boom gate with receiver post – Spring assisted (85.2kgs)dsbg-wr Dock-Safe boom gate optional wall mount receiver Minimum Opening: 3000mm wide Mounting Type: Surface mounted posts Rail Type: Aluminium 145 x 40mm Rail Height: 950mm above floor Overhead Clearance: Boom length plus 1000mm Finish: Powder coated with reflective Optional wall Lockable safety Receiver post mount receiver latch (included)60 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Light Boom Gate Description: Manual pedestrian boom gateEconomical and lightweight boom gate for situations Operation: Lift with gas strut assistancewhere floor space is an issue. A gas strut assists withlift and holds boom in the upright position. Construction: Steel posts with aluminium rail Gate Swing: 90 degrees lift Gate Stop: Built-inPart No. description Receiver Post: Included (optional wall mount receiver)LBG1500 Light boom gate with receiver post – 1500mm (16kgs)LBG2500 Light boom gate with receiver post – 2500mm (17kgs) Maximum Opening: 2400mm wide (clear)lbg-wr Light boom gate optional wall mount receiver Minimum Opening: 1000mm wide (clear) Mounting Type: Surface mounted posts Rail Type: Aluminium 80 x 30mm Rail Height: 1000mm above floor Overhead Clearance: Boom length plus 1000mm Finish: Powder coated rail with reflective / HDG post Optional wall Down Up mount receiver ••• 61 Receiver post (included)Copyright © 2018 Barrier Group Pty. Ltd.

ER-Rail Gate Description: Manual pedestrian swing gate Operation: Push open/adjustable spring closureAn economical spring-return pedestrian gate that can be Construction: Steel chassis with aluminium railpost, wall or rail mounted. It is designed to be used with Gate Swing: 90 degreesour modular aluminium ER-Rail system (see page 40). Gate Stop: Built-in Receiver Post: OptionalPart No. description Maximum Opening: 1200mm wideERG1200-PA ER-Rail gate (5.3kgs) Minimum Opening: 800mm widekit23 Gate to post fixing kit – Up to 63mm diameter posts Mounting Type: Post, wall or in-linekit24 Gate to post fixing kit – Up to 90mm diameter posts Rail Type: Aluminium 80 x 30mm Rail Height: 1000mm above floor Finish: Powder coated with reflective tape Adjustable spring tension62 ••• Copyright © 2018 Barrier Group Pty. Ltd.

PR-Rail Gate Description: Manual pedestrian swing gate Operation: Push open/adjustable spring closureA spring-return pedestrian gate similar in action to the Construction: Steel chassis with aluminium railER-Rail gate in that it can be post, wall or rail mounted. Gate Swing: 90 degreesIt is designed to be used with our modular aluminium Gate Stop: Built-inPR-Rail system (see page 42). Receiver Post: Optional Maximum Opening: 1500mm widePart No. description Minimum Opening: 800mm widePRG1500-PA PR-Rail gate (7kgs) Mounting Type: Post, wall or in-linekit23 Gate to post fixing kit – Up to 63mm diameter posts Rail Type: Aluminium 145 x 40mmkit24 Gate to post fixing kit – Up to 90mm diameter posts Rail Height: 1000mm above floor Finish: Powder coated with reflective tape Adjustable spring ••• 63  tensionCopyright © 2018 Barrier Group Pty. Ltd.

Ball-Fence Gate Description: Self-closing safety gate Operation: Hydraulic spring assistanceA robust self-closing pedestrian gate with an adjustable Construction: Steel chassis with aluminium hooplength aluminium hoop, designed to be paired with our Gate Swing: 90 degreesBall-Fence railing system. Features a fully adjustable Gate Stop: Built-inhydraulic closer. Receiver Post: Optional Maximum Opening: 1500mm widePart No. description Minimum Opening: 1000mm wide Mounting Type: Post or wallBFG Ball-Fence gate with raw aluminium hoop (14kgs) Gate Hoop: 42.4mm diameter aluminium Gate Height: 1000mm above floorbfg-p Ball-Fence gate with Yellow powder coated aluminium hoop (14kgs) Finish: Hot Dip Galvanised or Powder Coatedkit23 Gate to post fixing kit – Up to 63mm diameter postskit24 Gate to post fixing kit – Up to 90mm diameter postsBFGP90sm 90mm surface mount post for Ball-Fence gate – Powder coated YellowBFGP90sm-G 90mm surface mount post for Ball-Fence gate – Galvanisedbfgpwb-sm Ball-Fence gate post – 48 x 1017mm BFG-P model shown Optional safety signs Adjustable WATCH OUT BEWARE OF HIGH VISIBILITY hydraulic closer FOR VEHICLES CLOTHING OR VEST64 ••• S1174-PP PEDESTRIANS MUST BE WORN S1173-PP IN THIS AREA S1177-PP Copyright © 2018 Barrier Group Pty. Ltd.

Loading Dock Gate Description: 1-way and 2-way safety gates Operation: Spring-returnOne and two-way spring-return gates designed to reduce Construction: Steel chassis with aluminium hoopoperator falls by closing the gap between the rear end of Gate Swing: 90 or 180 degreestrucks and the exposed dock edges on elevated loading Gate Stop: Self-centeringdocks. Receiver Post: N/A Maximum Opening: 1000mm widePart No. description Minimum Opening: 600mm wideLDG1000-90 Loading dock gate – 1000mm with 90 degree opening (10kgs) Mounting Type: Post or wallLDG1000-180 Loading dock gate – 1000mm with 180 degree opening (10kgs) Rail Type: 42.4mm diameter aluminium hoopcs90sm Optional 90 x 90 x 1000mm high post Rail Height: 1000mm above floor Finish: Powder coatedWall or optional post Sliding latch connects to container or truck rear door Optional safety signs WATCH YOUR BEWARE OF NO ENTRY STEP VEHICLES S1174-PP S1176-PP S1175-PP Two-way self ••• 65  centering hingesCopyright © 2018 Barrier Group Pty. Ltd.

Manual Swing Gate Description: Manual swing gate Operation: Push open/push closeA post or wall mounted gate for applications where Construction: Steel post with aluminium railvehicle or pedestrian access is restricted. Single gates Gate Swing: 180 degreescan span up to 5 metres. When used in pairs with our Gate Stop: Receiver bracketoptional slot-lok latch, they can span openings up to Receiver Post: Optional10 metres. Maximum Opening: 5000mm wide Minimum Opening: 3000mm widePart No. description Mounting Type: Post or wallMSG5000 Manual swing gate – 5 metres (38.7kgs) Rail Type: Aluminium 145 x 40mmsll-pr Optional slot-lok latch for PR Rail (double gates only) Rail Height: 1000mm above floor Finish: Powder coated with reflective Wall receiver Wall or optional post (included) Optional Optional slot-lok latchreceiver post for use with double gates 66 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Self-Closing Swing Gate Description: Self-closing swing gate Operation: Hydraulic spring assistanceA self-closing swing gate for vehicle and pedestrian Construction: Steel post with aluminium railaccess to restricted areas features an adjustable Gate Swing: 90 degreeshydraulic closer. It can be wall or post mounted Gate Stop: Built-in soft stop with receiver bracketwith a maximum 5 metre wide opening. Receiver Post: Optional Maximum Opening: 5000mm widePart No. description Minimum Opening: 3000mm wideSSG5000 Self-closing swing gate – 5 metres (40kgs) Mounting Type: Post or wall Rail Type: Aluminium 145 x 40mm Rail Height: 1000mm above floor Finish: Powder coated with reflectiveWall or optional post Wall receiver Adjustable Shown here (included) hydraulic closer post mountedCopyright © 2018 Barrier Group Pty. Ltd. ••• 67 

De-Fence Swing Gate Operation: Push open/adjustable spring closure Gate Swing: 90 degreesDe-Fence self-closing mesh gates are available in either Maximum Opening: 1425mm widesingle or double height and can swing left or right. Minimum Opening: 925mm wideIdeal for work zoning or machinery guarding. Mounting Type: Surface mounted posts Gate Type: Tubular steel frame with 3 x 25mm meshMade to order: Gate Height: 1260 or 2410mm Finish: Powder coatedExperience tells us that every gate application isdifferent and requires specialist input. Call todayand let us design a solution specifically for yourrequirements. Note: Swing gates are available in single and double configurations68 •••

De-Fence Sliding Gate Operation: Manual slide open and closeThe sliding gate has an overhead track with a clearance Gate Slide: Overhead mountedof 2450mm leaving floors clear of obstacles. Available indouble height only with an opening up to 2925mm wide. Maximum Opening: Double gates 2925mm wideMade to order: Minimum Opening: Single gate 925mm wideExperience tells us that every gate application is different Mounting Type: Surface mounted postsand requires specialist input. Call today and let us designa solution specifically for your requirements. Gate Type: Tubular steel frame with 3 x 25mm mesh Gate Height: 2400mm only Overhead Clearance: Floor to overhead track 2450mm Finish: Powder coatedCopyright © 2018 Barrier Group Pty. Ltd. Note: Sliding gates are available in single and double configurations ••• 69 

Queue management systems are neededanywhere that “penguins” have to queueor congregate, like airports, theatres,galleries, workplaces and sporting venues.Our family of crowd control productscombines a range of materials, styles andaccessories to ensure there is a solutionfor every situation, from high-end commercialto tough industrial environments.Request a free site consultation today.

Queue Management

The Pilot System Cap with built-in10 Metre Belt Barrier accessory receiverThe Pilot retracting belt system brings an entirelynew level of functionality and versatility to the area ofpedestrian management. Rather than being a singleproduct with some accessories added along the way,Pilot has been designed from the outset as a completeintegrated system. This system consists of the mainPilot body unit with a 10 metre braked belt, self-lockingbelt clip and included sliding post clip. Our unique‘Twist-lok’ quick connect system. Twist-lok allows thePilot body to be switched between a range of posts,cones, wall and magnetic holders.Pilot is available in six standardbelt colours and four printed belts.Printed belts on pages 82-83. Included sliding post clip Detachable twist-lok cone mount adaptor (PILOT-CMA) includedPART No. DESCRIPTION Belt wall mountpilot-red Pilot 10 metre belt barrier with cone mount adaptor – Red receiver (NWR-LC)pilot-blu Pilot 10 metre belt barrier with cone mount adaptor – Bluepilot-blk Pilot 10 metre belt barrier with cone mount adaptor – Black includedpilot-yel Pilot 10 metre belt barrier with cone mount adaptor – Yellowpilot-rw Pilot 10 metre belt barrier with cone mount adaptor – Red/Whitepilot-by Pilot 10 metre belt barrier with cone mount adaptor – Black/Yellow -RED -BLU -BLK -YEL -RW -BY72 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Twist-lok VersatilityCone Mount Adaptor PILOT-CMA Post Mount Adaptor PILOT-PMADetachable cone mount allows Pilot to be fitted to The Post Mount Adaptor is supplied with all Pilot postsmany common traffic cones. Each Pilot is supplied and wall mounts. It allows the Pilot unit to be quicklywith one cone mount, but extras can be purchased attached with a simple twist-lok action. Additional Postas required. Mount Adaptors can be purchased if required.Built-in Accessory Receiver 4-Way Receiver Adaptor PILOT-4WRRemove the top cap on Pilot to expose the built in This adaptor allows up to four Pilot belts to be terminatedtwist-lok accessory receiver. Quickly connect Pilot A4 at a single location. It works with both the cone or postor A5 sign holders or Pilot solar powered LED hazard light. adaptors as well as the wall and magna mount receivers.Copyright © 2018 Barrier Group Pty. Ltd. ••• 73 

PilotWall Mount Bracket(Pilot sold separately)The Pilot wall mount bracket can be permanently fixedto any flat surface. The built in twist-lok feature meansthe Pilot unit can be quickly attached or removed fromthe bracket as required. Each wall mount bracket issupplied with a belt receiver (NWR-LC) for the other wallif not using a post or cone, or another Pilot.PART No. DESCRIPTIONpilot-wmb Pilot wall-mount bracket with NWR-LCnwr-lc Belt wall receiver (additional) Wall mount bracket PRO TIP: Belt wall Always walk the belt back to the unit to avoid receiver folding within the Pilot body. DO NOT allow the belt to retract on its own. Pilot body unit sold separately Copyright © 2018 Barrier Group Pty. Ltd.74 •••

PilotMagna-Mount Bracket(Pilot sold separately)The strong magnet in the Pilot magna-mount bracket allowstemporary placement of the Pilot unit on any steel surface.Each magna mount bracket comes with a built in safetybungy that protects the unit from damage should it beaccidentally dislodged, a magnetic wall receiver (NMWR)which allows the extended belt to be attached to a metalsurface at the other end and a fixed wall receiver (NWR-LC).PART No. DESCRIPTION NMWR & nwr-lcpilot-mmb Pilot magna-mount bracket with bungy and magnetic belt-clip (Both included)NMWR Magnetic wall receiver (additional)nwr-lc Belt wall receiver (additional)Copyright © 2018 Barrier Group Pty. Ltd. Pilot body unit sold separately ••• 75 

Co-Pilot20 Got a wind problem? Let the Co-Pilot take care of it. The biggest problem for20kg Portable long-reach belt barriers used outdoors is high wind. The Co-Pilot providesPost and Base stability through its 20kg cast iron base and stainless steel post, while the 75mm diameter non-marking rubber wheels and pozi-grip handle make(Pilot sold separately) positioning as simple as tilt and walk. The pilot unit can be attached or removed in seconds using the convenient twist-lok quick connect feature. PREMIUM Premium posts are manufactured from 1.6mm thick 304 grade polished stainless steel Convenient pozi-grip handle Built-in lifting handles Simply tilt and walk CO-PILOT20 20kg cast iron base with post is highly 20kg portable post and base with handle recommended for outdoor applications76 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Pilot PilotHi-line Post and Base 1 metre Traffic Cone(Pilot sold separately) (Pilot sold separately)A 6.8kg rubber base with 63 diameter Hi-vis Yellow Standard 1 metre traffic cone with 6.2kg rubberUPVC post. The post includes a twist-lok receiver to base accepts the Pilot with supplied Cone Adaptoraccept the body unit and all other Pilot accessories. fitted. Additional rubber base weights add 6.2kgs and are recommended in windy conditions. UPVC UPVC posts are manufactured from 1.4mm thick UV treated PVCTwist Twist Pilot twist-lok btc1000r quick connect system 1 metre traffic cone with 6.2kg rubber base PHLPVC btc1000b UPVC post with 6.8kg rubber base Additional 6.2kg rubber base weight Recommended in windy conditionsCopyright © 2018 Barrier Group Pty. Ltd. ••• 77 

Pilot Posts Pilot removable in-floor posts are available in either premium 304 gradeRemovable In-Floor polished stainless steel or durable UPVC plastic. The 63mm posts are a pin and socket design that allows them to be quickly deployed and removed(Pilot sold separately) without tools, leaving a clear floor. The Pilot unit attaches via the twist-lok fitting built-in to the top of the post. See page 87 for installation procedures. premium Premium posts are manufactured from 1.6mm thick 304 grade polished stainless steel upvc UPVC posts are manufactured from 1.4mm thick UV treated PVCHow it works Twist PREMIUM UPVC Pilot twist-lok quick connect system prifssp prifpvc Removable in-floor ST/ST post Removable in-floor PVC post NIFS-SS Copyright © 2018 Barrier Group Pty. Ltd. See page 87 for installation78 •••

Pilot Posts Pilot fixed in-floor posts are available in either premium 304 grade polished stainlessFixed In-Floor steel or durable UPVC plastic. The 63mm posts use an aluminium slip post kit which allows them to rotate for belt alignment while a security fixing prevents unauthorised(Pilot sold separately) removal. The Pilot unit attaches via the twist-lok fitting built-in to the top of the post. See page 89 for installation procedures. premium Premium posts are manufactured from 1.6mm thick 304 grade polished stainless steel upvc UPVC posts are manufactured from 1.4mm thick UV treated PVCHow it works Twist PREMIUM UPVC Security fixing Pilot twist-lok quick connect system pFifssp pFifpvc Fixed in-floor ST/ST post Fixed in-floor PVC post NFSP-A ••• 79  See page 89 for installationCopyright © 2018 Barrier Group Pty. Ltd.

Pilot Accessories The Pilot A4 and A5 sign holders use our twist-lok component that attaches to the topSign Holders of a Pilot body, Co-Pilot or any of the Pilot posts, wall and magna-mount brackets. Each sign holder is supplied with a clear double sided acrylic sign pocket which allows(Pilot sold separately) the insertion of low-cost printed paper signs. Compatible with options 1-5 below pilot-a4sh 1 pilot-a5sh 3Compatible Pilot 2Twist-Lok MountingSystems Pilot mounted Cone mounted Post mounted80 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Pilot Light Like all of the other components in the Pilot system, the solar powered hazard light utilisesSolar Powered our unique twist-lok quick connect system to attach to the full range of posts, cones, wall andFlashing Light magna-mount holders. Pilot lights are available in Red, Green, White or Amber light. When fully charged after exposure to sunlight, the lights will continue to function for many hours without(Pilot sold separately) the need for batteries. A built-in switch allows the selection of OFF, FLASH or STATIC modes. Pilot Light shown mounted to Pilot barrierCompatible with options 1-5 below 4 5 PART No. DESCRIPTION PILOT-A4SH Pilot A4 sign holder Wall mounted 4-way mounted PILOT-A5SH Pilot A5 sign holder PILOT-LTR Pilot solar powered light – RedCopyright © 2018 Barrier Group Pty. Ltd. PILOT-LTG Pilot solar powered light – Green PILOT-LTW Pilot solar powered light – White PILOT-LTA Pilot solar powered light – Amber ••• 81 

Optional Aside from the standard belt colours on page 72, the following five optional pre-printedPrinted Belts belts are also available for retro-fitting to Pilot and Neata top belt cassettes. As there is additional labour involved charges will apply, please call to discuss your needs.82 ••• NSP-C “CAUTION” Retractable Belt – Black/Yellow NSP-CNE “CAUTION NO ENTRY” Retractable Belt – Black/Yellow NSP-DNE “DO NOT ENTER” Retractable Belt – Black/Yellow NSP-NE “NO ENTRY” Retractable Belt – Red/White NSP-BW Diagonal Striped Retractable Belt – Blue/White Copyright © 2018 Barrier Group Pty. Ltd.

Custom Company logos, product branding or instructions. These are just some of theBelt Printing reasons you may wish to have your belts custom printed. Minimum quantities and lead times apply. Additional costs and artwork charges will be incurred. Please call for a quotation.Copyright © 2018 Barrier Group Pty. Ltd. ••• 83 

Single Belt Posts Neata single belt posts are available in economy stainless steel, premium stainlessPortable steel or durable UPVC plastic. There are also four base designs to choose from. All posts are 63mm in diameter and come with 3 metre belts in a choice of six standard colours or five optional printed belts, page 82. Custom belt printing, page 83, is available on request (charges apply). All belt cassettes have a built-in brake and self-locking clip. economy Economy posts are manufactured from 0.7mm thick 201 grade polished stainless steel premium Premium posts are manufactured from 1.6mm thick 304 grade polished stainless steel upvc UPVC posts are manufactured from 1.4mm thick UV treated PVC economy PREMIUM PREMIUM UPVC NBMLSSE* NBSLSSP* NBHLSSP* NBHLPVC**Add suffix code with required belt colour -RED -BLU -BLK -YEL -RW -BY84 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Double Belt Posts Neata double belt posts are available in economy stainless steel with three basePortable designs to choose from Midline, Stackable or Roller. All posts are 63mm in diameter and come with 3 metre belts in a choice of three standard Red, Blue or Black colours. All belt cassettes feature built-in brakes and self-locking clips. Note: Optional printed belts and custom belt printing are available for the top belt only.economy economy economy NBMLSSED* NBSBSSED* NBRBSSED* Neata belt stacker base Neata belt roller base*Add suffix code with required belt colour stainless steel economy double stainless steel economy double -RED -BLU -BLK ••• 85 Copyright © 2018 Barrier Group Pty. Ltd.

Belt Posts Neata belt posts are available in two grades of stainless steel or durable UPVC plastic. The 63mmRemovable removable in-floor posts are a pin and socket design that allow the posts to be quickly deployedIn-Floor or removed without tools, leaving a clear floor. Cassettes are available in a choice of six standard, and five printed, 3 metre belts (see note below) with brake feature and self-locking clips. Stainless steel in-floor socket sold separately. See page 83 for custom belt printing. economy Economy posts are manufactured from 0.7mm thick 201 grade polished stainless steel premium Premium posts are manufactured from 1.6mm thick 304 grade polished stainless steel upvc UPVC posts are manufactured from 1.4mm thick UV treated PVC NIFS-SS economySee page 87 for installation PREMIUM UPVC economy NBRIFSSE* NBRIFSSED** NBRIFSSP* NBRIFPVC* *Add suffix code with required belt colour -RED -BLU -BLK -YEL -RW -BY86 ••• **Note: Double belt post comes in Red, Blue or Black colours. Custom printing available for the top belt only. Copyright © 2018 Barrier Group Pty. Ltd.