ARROW TECHNICAL SERVICES LIMITED BROCHURE rev1 6.3.2020 flipping

Company Profile

Company Profile







Asset Integrity Management Maximize The Return From Your Onshore, Offshore and Subsea Investments With existing Oil & Gas operating assets reaching or past their original design life operators are turning to Asset Integrity Management to remain competitive. Your assets must perform effectively and efficiently to ensure safe and reliable operation in order to achieve your strategic goals and objectives. ATSL can complement your in-house staff expertise to formulate, optimize existing and implement effective asset integrity management system for your onshore and subsea pipeline assets, onshore and topside processing facilities, jacket structures etc. Our assets integrity management services combines knowledge of various disciplines such as Corrosion Management, Materials Technology, NDE, Modeling technology etc. to help you keep your assets up and running efficiently, economically and safely without endangering the environment whilst simultaneously helping you to optimize your OPEX and Inspection budgets. Service Offerings • Optimized Maintenance and Inspection plans development • Customer specific issues for onshore, offshore and subsea assets • Life extension for ageing infrastructure • Development and optimization of strategies and work processes • Barrier Management reviews • Corrosion Risk & Integrity Engineering Audits • Corrosion Testing, Monitoring & Inspection • Failure Prediction & Investigation • Inspection program client representation • Risk Based Inspection (RBI) program development People • Integrity • Excellence • Innovation

Corrosion Management Pragmatic solutions when it comes to Corrosion Management and Material Selection Ageing infrastructure is one of the most serious problems faced by society today. In past decades, corrosion professionals focused primarily on new construction—specifying materials and designing corrosion prevention and control systems for buildings, bridges, roads, plants, pipelines, tanks, and other key elements of the infrastructure. Today, as much of the aging infrastructure reaches the end of its designed lifetime, the emphasis is on maintaining and extending the life of these valuable assets. Let the ATSL team demonstrate how we can ensure that your valuable assets continue to operate safely and economically. Service Offerings Optimized Maintenance and Inspection plans development and reviews Root Cause Failure Investigations Corrosion Inhibitor Performance Assessment Engineering Critical Assessments Threat assessments and Mitigation Customer specific issues People • Integrity • Excellence • Innovation

Structural Integrity Management Application of qualified standards, by competent people, using appropriate processes Integrity of your structural assets whether offshore or onshore is key for continued safe operations. Structural integrity and safety are of utmost importance to us. We help ascertain current conditions using risk based techniques and develop integrity management strategies with safety, reliability and cost efficiency as fundamental guiding principles. Our structural engineers design solutions tailored to your needs using state of the art engineering software. Service Offerings ❑ Offshore Platform Life Extension Analysis ❑ Corrosion Management of Offshore Structures ❑ Fitness-For Purpose Assessment of Offshore Structures ❑ Reliability-Based Inspection Planning ❑ Risk-Orientated Strategies to Prioritize Critical Assets and Avoid Time-Wastage on Healthy Structures ❑ Determination of Structural Reserve Strength Ratio (RSR) of Existing Offshore Structures ❑ Fracture and Fatigue Analysis of Aging Structures ❑ Finite Element Modelling ❑ CAD drafting ❑ Seismic analysis and assessment ❑ Linear dynamic analysis ❑ Non linear static analysis (Pushover)Soil structure interaction People • Integrity • Excellence • Innovation

Construction & Project Management Helping your employees to excel everyday by following approved work flows Any organization can move forward with small incremental changes, but thriving in today’s rapidly evolving environment means taking bold chances and making insightful decisions. Projects rely on people and are, by definition, doing something new. There will always be a level of uncertainty, but being clear about the roles and responsibilities, behaviors, competencies, processes and templates can ensure the schedule is accurate, that adequate resources are available, that everyone understands what is expected of them, what will be delivered and how much it will cost. If you are looking to plan and execute your next project but not sure where to turn - ATSL can help. Our team members have been involved in planning, budgeting, securing resources and executing projects both onshore, offshore, locally and oversees. Let us help you with your next project whether onshore or offshore. Service Offerings • General project planning and execution • Client representatives and witnessing for Factory Acceptance Testing (FAT) • Site Integration Tests (SIT) etc. • Support for Onshore and Offshore inspection programs • Client specific services as required • Construction Management • Preparation and review of tendering documents • Independent Engineering review of design options People • Integrity • Excellence • Innovation

Environmental Management Services Helping to protect our natural environment ATSL is committed to the application of scientific and engineering principles for protection of human populations from the effects of adverse environmental factors; protection of the environment from potentially deleterious effects of natural and human activities; and improvement of environmental quality. Let our trained staff support you on your next waste treatment, wastewater treatment, site remediation, or pollution control project. Our team member has over 13+ years of experience in delivering various services to support both onshore and offshore projects. Service Offerings • Customer specific issues • Scientific Surveying and Data Analysis • Physical and numerical modelling of climate change factors on structures • Beach profiling • Flora and fauna assessments • Water quality (physical & chemical parameters) testing • Sediment quality analysis • Collection and analysis of meteorological data at work site • Tide and current data collection • Air and noise quality • Bathymetry survey data collection & analysis • Environmental Impact Assessments (EIAs) • Monitoring reporting • Feasibility studies • Project Management for onshore and offshore & environmental surveys • Social Surveys: interviews, land based traffic surveys, etc. • Health, Safety & Environmental (HSE) compliance • Logistics coordination for field surveys inclusive of: ➢ Equipment ➢ Vehicle ➢ Personnel ➢ Permissions ➢ travel (local, regional and international) ➢ Data QA\\QC and data analysis People • Integrity • Excellence • Innovation

Instrumentation, Control & Electrical Excellence in planning, installing, monitoring and maintaining your control systems The electrical engineering and design team, comprises of qualified, highly skilled, and experienced personnel; capable of providing all aspects of electrical, control and instrumentation design. Using practical knowledge and experience, cost effective, innovative and safe design solutions. Detailed designs cover the full range of services from; intelligent instrumentation and associated communications networks through to HV/LV distribution systems and networks. We ensure that Health & Safety is considered paramount and incorporated in all of our design solutions. The ATSL team can design and build custom control panels for a variety of industries, meeting various regulatory standards; experts in Instrumentation & Control System design, advanced software development, capability for PLCs, HMIs and SCADA systems. Competent and reliable automation experts apply state-of-the-art technologies in commissioning, assembly and maintenance of process plants, mainly for the Oil and Gas (Onshore and Offshore), Chemical and Petrochemical industries and Food Processing. Service Offerings 5-stage model for commissioning: Planning and Engineering, Conditioning and Preservation, Commissioning, Start up and Assisted Operation Site Survey, Plant load studies, Low Voltage Distribution, Cable routing layouts, Cable schedules, Termination drawings Control Data Sheets, Control and Data Acquisition, Safety Shutdown Systems, Technical support, As built document records, Software engineering Installation of Instrumentation, Loop/Functional Testing, Pre- calibration/Calibration of Instrumentation Profibus/Fieldbus Control Systems, Non-Hazardous & Hazardous Area Installations and Inspections, SIL & IS Calculations Reducing risk, minimize disruption, maximize efficiency and savings, Plan and react People • Integrity • Excellence • Innovation



Key Personnel & Resume Summary Experienced personnel to help you overcome your challenges People • Integrity • Excellence • Innovation

Ravie Oudit REng, CEng, MIMechE (UK), MSc (Petroleum), BSc (Mechanical), NACE O-CAT, API 570 SUMMARY A Chartered Mechanical Engineer (CEng) who exhibits excellent leadership, sound technical judgement and integrity in all aspects of business. Having over 15+ years varied and progressive experience I have supported onshore, offshore and subsea projects with asset integrity management challenges and initiatives to optimize plant operations whilst managing operational risk and reliability. PROFESSIONAL EXPERIENCE Concepts & Services Limited| Galeota Onshore Receiving Terminal & Beachfield Gas Distribution Plant | www.bp.com/ | BPTT Onshore Site Engineer (June 2019 to Present) • Engineering Support – Act as the first point of contact for engineering issues arising at site; performs immediate triage and decision-making to resolve issues. Supports the risk management process, including development and implementation of risk action plans and monitoring/communication of barrier health. Activities include ORAs, HITRA level 2, Abnormal operations etc. • Risk Management – Supporting the MoC and Engineering Query processes. Preparing operational risk assessments (ORA’s), advising the site of the most efficient way to resolve engineering issues; and communicating barrier health to manage plant risk • Asset Integrity – Providing engineering expertise to drive operational efficiency and manage the risk of ageing infrastructure • Life Extension - Reviewing Fitness for Service assessments, inspection reports and anomaly/defect repair methods • Alarm Management – Supports the Operations team with engineering review of site over-rides and inhibits and ensures that the alarm management process is implemented robustly at site. Performs engineering self-verification at site (LO/LC, ORAs, etc.) • Operational Support – Reviewing procedures to increase plant reliability and operational efficiency e.g. leak testing, piping re- routing. Performing commissioning and start-up reviews (PSSR), investigating leaks and defects in process piping etc. IntelliSIMS Trinidad Limited | Port-of-Spain, Trinidad & Tobago | www.isims-ps.com/ | Senior Asset Integrity Engineer (January 2018 to February 2018) • Asset Integrity - Developed equipment asset registers comprising static/fixed process equipment, rotating equipment, process piping, valves, fire & gas detection system and electrical & instrumentation (E&I) systems for EOG Resources Toucan platform • Planning - Participated in the planning, cost development and management, and scheduling for assigned offshore AIM projects. • CVA Inspection - Planned and executed the bpTT Cassia A platform 10” & 24” Pigging Modification project field inspection TechnipFMC | Houston, Texas, USA | https://www.technipfmc.com/ | Integrity Management (IM) Specialist (February 2017 to June 2017) • Service Oriented - Coordinated and managed all the interfaces required respond to 10+ RFQ’s for various engineering scopes • Integrity Management - Led Integrity Management\\IMR projects and initiatives in North America, Mexico & Trinidad • Business Development - Gathered and evaluated business drivers and competitor intelligence to formulate optimized market share capture plans to support global business development, market entry plans to increase order intake Forsys Subsea Inc. (A Technip and FMC Technologies JV) | Houston, Texas, USA | https://www.forsys-subsea.com/ | Integrity Management (IM) Specialist (May 2015 to January 2017) • Failure Investigations – Participated in defect elimination (Root Cause Analysis) and Bad Actor analysis for topside hardware • Project Management/Estimating - Prepared the scope, WBS, budgetary estimates, forecasts and coordinated all interfaces required to support twelve (12) Subsea IMR projects/initiatives in the US Gulf of Mexico, Mexico and Trinidad & Tobago • Risk Based Inspection - Supported the technical & operations teams for various clients implementing corporate RBI/asset management and maintenance programs for topsides static equipment & piping to achieve compliance requirements • Subsea Pipeline Integrity - Demoed the 3D Subsea LiDAR Inspection Technology at 10+ client offices & 2017 OTC Houston • Communications - Presented a paper entitled “3D Subsea LiDAR technology for Subsea Integrity Assessments” at the 2017 AmCham TT HSSE Conference, Trinidad and to the students and members of the UWI Faculty of Mechanical Engineering Genesis Oil & Gas Consultants | Houston, Texas, USA | http://www.genesisoilandgas.com/ | Senior Staff Specialist II (January 2015 to May 2015) • Complex Problem Solving - Consulted with internal global subject matter experts to the develop and implement solutions to address equipment related issues such as failures, corrosion mitigation, mechanical integrity, inspection, GIS Management etc. • Asset Integrity - Developed and implemented topside equipment preventive, condition monitoring and reliability programmes • Project Execution - Developed and implemented engineering schedules and work plans for various client’s projects • Capital Projects – Provided Asset Integrity expertise to support the engineering design of customer’s capital projects • Leadership/HS&E Performance - Promoted and supported continuous business improvement activities under the sphere of my influence to develop a high performing team with a ‘be safe’ and ‘mistake free’ culture. Member of the office HSE team People • Integrity • Excellence • Innovation

Ravie Oudit REng, CEng, MIMechE (UK), MSc (Petroleum), BSc (Mechanical), NACE O-CAT, API 570 PROFESSIONAL EXPERIENCE CONTINUED Ministry of Energy & Energy Industries, HSE/Measurement Division | Trinidad | http://www.energy.gov.tt/ | Lead Asset Integrity Engineer (May 2013 to December 2014) • Risk – Reviewed the risk associated with projects being proposed by external entities • Leadership/Negotiation - Led the Asset Integrity Management unit whilst Mentoring 3 Asset Integrity Engineers to develop in-house competency. Prepared competency development plans, and proactively resolved general conflicts/issues • Accountability/Collaboration - Set direction, priorities, and successfully planned, coordinated, managed and executed 40+ integrity inspections on onshore and offshore oil and gas drilling and production installations to assess Integrity/HSE compliance • HS&E Compliance - Led the PAS55/ISO 55000 compliance drive to work towards improving HSE performance to foster and develop a culture of ‘Zero Harm to people and assets’ and ‘Zero environmental incidents’ • HAZOPS/PSM – Participated in HAZOPS and Process Safety Management (PSM) revalidation exercises for oil and gas facilities Lloyd’s Register Technical Services (LRTS) | Houston, Texas, USA | https://www.lr.org/en/ | Technical Support Specialist (April 2010 to May 2012) • Technical Report Writing - A Demonstrated experience of technical report writing and the accurate collection of field data • People Management - Developed and maintained business relationships based on open and honest communication underpinned by reliable proactive performance, expectation management and earned respect. Resolved general client issues • Analytical Reasoning - Modeled over 40+ proprietary chemicals for refineries and petrochemical plants for clients in USA, Canada, Korea, Qatar, Kazakhstan, UK, Trinidad, Europe & Germany for use in Risk Based Inspection (RBI) implementation • Risk Based Inspection (RBI) – Planned, coordinated and completed over 15 RBI client software upgrades globally Lloyd’s Register Capstone, LRC | Houston, Texas, USA | https://www.lr.org/en/ | Junior Risk & Asset Integrity Engineer, Asset Performance Group (August 2008 to March 2010) • Project Cost Control - Measured RBI project progress and ensured that operational expenditure didn’t exceed budget • Project Reporting - Ensured that accurate reports were generated for the various client work programmes/projects • Accountable - Performed all field verification inspection at Caribbean Nitrogen and N2000 plants to facilitate RBI program • Conflict Resolution - Managed the various technical disciplines and proactively resolved cross discipline technical issues • People Management - Coordinated personnel & corrosion study workshops to identify damage mechanisms, threats etc. • Collaboration/Analytical Reasoning - Successfully applied collaborative approach to support the Risk Based Inspection (RBI) implementation for clients in USA, Germany, Canada, Trinidad, Korea, Qatar • Root Cause Failure Investigation – Assisted the Senior Metallurgical Engineer with failure analysis and high temperature testing Lloyd’s Register Central & South America Limited (LRCSA) | Port-of-Spain, Trinidad | https://www.lr.org/en/ | Lead Asset Integrity Management (AIM) Engineer (October 2005 to July 2008) • Project Management - Directed activities to ensure that construction, installation, and operational testing conform to functional specifications, recognized codes and standards, and customer requirements • Project Reporting & Cost Control - Ensured the accuracy and continuous performance management of the baseline schedules. Provided open, honest, unbiased communications to the customer to close identified gaps for the various work scopes • Leadership/Collaboration - Supervised and managed third-party contractor staff with the inspection of Fourteen (14) offshore facilities. Completed all inspections 7 days earlier than scheduled thus providing tangible savings to the client and their operation • Risk Based Inspection (RBI)/Collaboration - Planned and executed the BHP Billiton Pressure Safety Valve (PSV) field inspection and verification for all onshore and offshore assets. Completed all inspections 3 days ahead of schedule delivering superior value for the customer. • Accountability - Based on the Angostura CPP Platform, I coordinated the 2007 daily ROV inspection surveys of platform jacket structure/members and subsea export pipelines for the Angostura field to comply with API RP2A requirements • Customer Focused - Supported the BGTT offshore inspection team with the 2006 ROV inspection of the Hibiscus to Atlantic LNG 24” gas pipeline. Proactively resolved issues and met the tight client deadline for business continuity by optimizing resources EOG Resources Trinidad Limited (EOGRTL) | Offshore East Coast Marine Area, Trinidad | http://www.eogresources.com/ | Junior Drilling Engineer (February 2004 to February 2005) • Collaboration/People Management/Conflict Resolution - Daily coordination and management of all service contractor interfaces. Proactive coordination and resolution of technical issues to deliver exceptional HSE and financial performance. • Operational Support – Supporting the EOG Resources onsite drilling team with inspecting casing, monitoring drilling parameters, pumping operations etc. Learning from mentors how to troubleshoot operational drilling issues. • Drilling metrics – Tracked operational drilling data for use in planning and optimizing future offshore drilling campaigns. People • Integrity • Excellence • Innovation

RAaleveiemOMudoiht ammed REng, CEng, MIMechE (UK), MSc (Petroleum), BSc (Mechanical), NACE O-CAT, API 570 PROFESSIONAL DEVELOPMENT AND TECHNICAL PROFICIENCIES EDUCATION • Master of Science (MSc) in Petroleum Engineering (2005) | University of The West Indies St. Augustine | Trinidad • Bachelor of Science (BSc) in Mechanical Engineering (2000) | University of The West Indies St. Augustine | Trinidad PROFESSIONAL CERTIFICATIONS • American Petroleum Institute (API) | API 570 Process Piping Inspector, #35577 • NACE International (NACE) | Offshore Corrosion Assessment Technician (O-CAT), #66846 • National Examination Board in Occupational Safety & Health, NEBOSH UK | Level 3 Certificate PROFESSIONAL MEMBERSHIPS • Member | Institution of Mechanical Engineers (IMechE, UK) | Chartered Engineer (CEng), #643046 • Member | Board of Engineering of Trinidad & Tobago (BOETT) | Registered Engineer (REng), #11-1507 • Member | NACE International | American Society of Mechanical Engineers (ASME) | Society of Petroleum Engineers (SPE) | AREAS OF EXPERTISE Asset Integrity Management (AIM) | Project Management | Risk Based Inspection (RBI) | Field Inspections | NDE | Process Piping Systems | Corrosion Management & Mitigation | Materials Technology | Welding Technology | Offshore Inspections | Pipelines| AQUIRED & DEMONSTRATED HARD SKILLS | Computer Technology 9/10 | Data Analysis 8/10 | Project Management 9/10 | Active Listening 8/10 | Mentoring 8/10 | Research 8/10 | HSE Management 9/10 | Engineering Analysis 8/10 | Maintenance 9/10 | Sales & Marketing 8/10 | Business Presentation 8/10 AQUIRED & DEMONSTRATED SOFT SKILLS Service & Results Oriented 8/10 | Negotiation 8/10 | Analytical Reasoning 9/10 | Communication 8/10 | Innovative 8/10 | Leadership 8/10 | Time Management 8/10 | Complex Problem Solving 9/10 | Influence/Persuasion 8/10 | Reliable 9/10 | Critical Thinking 8/10 | People Management 9/10 | Collaboration 9/10 | Accountability 8/10 | Adaptability 9/10 | Creativity 8/10 | SAMPLE OF TECHNICAL COURSES COMPLETED (130+ courses completed to date) • ASME Pressure Relief Devices - • Neoedge Pte Limited Small To • ASME BPV Code Section VIII Div 1 Design, Sizing, Construction, Mid-Scale LNG Projects & - Design & Fabrication Of Inspection And Maintenance Infrastructure Development Pressure Vessels, Repairs & Master Class Alteration • ASM International Metallurgy For • ASM International Welding • ASM International Fundamentals The Non-Metallurgist Inspection And Quality Control Of Non- Destructive Testing • ASM International Practical Oilfield • Golder Associates Managing • NACE Pipeline Corrosion Integrity Metallurgy & Corrosion Occupational Hygiene Risks In Management (PCIM) The Petroleum Industry CONTACT DETAILS LinkedIn Profile | http://www.linkedin.com/in/ravie-oudit-reng-ceng-mimeche-msc-uwi-bsc-uwi-7707641b | Email Address | [email protected] | [email protected] | Telephone | +1 (868) 720-1353 | +1 (868) 620-8901| Address |118 Nolan Street, Felicity, Chaguanas | Trinidad & Tobago | People • Integrity • Excellence • Innovation

Aleem Mohammed REng, MSc (Civil Structural), BSc (Civil) SUMMARY A Civil Structural Engineer with 9 years progressive experience in planning, concept development, analysis, design, construction engineering, project management and asset integrity management. Experienced in the oil and gas, heavy and commercial sectors. PROFESSIONAL EXPERIENCE Fircroft | Port-of-Spain, Trinidad & Tobago | Consultant Structural Engineer (March 2019 to Present) Area Asset Integrity Engineer at bpTT with the following responsibilities: • Structural integrity management of bpTT’s assets utilizing API RP 2SIM and BP workflows. • Managing anomalies using RBA/RBI with bpTT’s work management system. • Managing activities related to structural and civil discipline and co ordinating MOC. • Conducting risk assessments within discipline. • Proposing solutions to structural and civil engineering problems utilizing design tools and international codes. • Provide structural engineering guidance and expert judgement to operations team. • Reviewing Contractor’s designs, proposals and certifying completion of activities. Bechtel | Pointe-a-Pierre | Structural Engineer (October 2017 to March 2019) Worked on Atlantic LNG Upgrade Project (Brownfield) for Trains 1,2,3,4 with the following responsibilities: • Worked in the Civil, Structural and Architectural Engineering discipline within OGC business unit responsible for preparation, interpretation or review of calculations, specifications, plans, investigations, surveys, systems or equipment. • Involved in the analysis and design of reinforced concrete and structural steel structures and foundations. • Preparation of conceptual sketches and layouts to support engineering studies. • Preparation of engineering specifications, design criteria and calculations. • Preparation of BIM models and construction drawings. • Use of regulatory standards such as AISC, ASCE, ACI, AWS, ASTM, IBC and other international codes in specifications and design. • Use of engineering computer aided design (CAD/CAE) tools such as STAAD Pro, Mathcad, Microstation, SmartPlant. • Coordination of design with other disciplines, updating P&ID’s and plant BIM models. Ch2m | Port of Spain | Structural Engineer (September 2013 to October 2017) Worked on Sir Solomon Hochoy Highway Extension to Point Fortin, Mayaro Guayaguayare Coastal Protection, Modification to Endeavour Interchange, CDA Boardwalk 2B, Blue Plain Tunnel (Washington DC), Universal Studios Pedestrian Tunnel (Florida), George Price Highway Project (Belize) St. John Flood Mitigation (Grenada) with the following responsibilities: • Design, detailing and plans preparations for various structures including flat slabs, prestressed concrete girder, post tensioned concrete girder and steel girder bridges, abutments, piers, mast arms, box culverts, pedestrian boardwalks, overhead sign structures, steel and concrete buildings. • Design of substructures using soil structure interaction modelling. • Design of multi span bridges for high seismic zone utilizing linear dynamic and non-linear static analyses. • Seismic assessment of structures using ASCE 41. • Finite Element Modelling of irregular structures for analysis and assessments. • Use of regulatory standards such as AASHTO, ACI, AISC, ASCE and other international codes in specifications and design • Preparation of drawings, reports, technical notes, material take offs, specifications, schedules and tender documents. • Interdisciplinary coordination and client interfacing. • Inspection of construction works for QC • Solving technical construction problems on site, responding to RFI’s and NCR’s. People • Integrity • Excellence • Innovation

AAlleeeemm MMoohhaammmmeedd REng, MSc (Civil Structural), BSc (Civil) PROFESSIONAL EXPERIENCE CONTINUED NIDCO | Port of Spain | Project Engineer (January 2012 to September 2013) Worked on Sir Solomon Hochoy Highway Extension to Point Fortin, Bridge Rehabilitation Program, Landslip Repair Program, Port of Spain Flood Alleviation, Drainage Improvement Program, Caparo River Basin Study with the following responsibilities: • Assist in the administration of contracts under FIDIC standard forms of contracts. • Participate in the procurement management of consultants and contractors. • Conduct reviews of designs, specifications and tender documents to ensure value engineering and quality control. • Provide guidance to civil structural engineering matters. • Prepare progress reports, schedules and payment certificates. • Attend meetings with consultants, contractors, clients as required. • Conduct site visits on projects to ensure compliance with contract documents. Ministry of Works and Transport | Port of Spain | Bridge Engineer (July 2011 to January 2012) • Maintenance of bridges throughout Trinidad the following responsibilities: • Inspection of bridges to assess condition and rehabilitation strategy. • Preparation of contract documents for bridge repairs and rehabilitation. • Quantity take off and cost estimate of materials. • Updating of bridge management system for asset integrity. PROFESSIONAL DEVELOPMENT AND TECHNICAL PROFICIENCIES EDUCATION • Master of Science (MSc) in Civil Engineering (2018) | University of The West Indies St. Augustine | Trinidad • Bachelor of Science (BSc) in Civil Engineering (2011) | University of The West Indies St. Augustine | Trinidad PROFESSIONAL MEMBERSHIPS • Member | Board of Engineering of Trinidad & Tobago (BOETT) | Registered Engineer (REng), #04-1603 • Member | Association of Professional Engineers of Trinidad and Tobago (APETT) AREAS OF EXPERTISE Structural Design | Structural Detailing | Finite Element Modelling | Dynamic Analysis | Pushover Analysis | Performance Based Design| Computer Aided Design (CAD) | Asset Integrity Management | Project Management | Project Administration | Scheduling | CONTACT DETAILS Email Address | [email protected] | Telephone | +1 (868) 746-1324 | Address |Lange Park, Chaguanas | Trinidad & Tobago | People • Integrity • Excellence • Innovation

Hafiz Ali MBA (Logistics & Supply Chain Mgt), BSc (Instrumentation, Control & Electrical Engineering) SUMMARY An Instrumentation, Controls & Electrical Engineer with varied professional experience in multi-disciplined engineering teams. Expert in control system, electrical design, process control and automation concepts. Specialized in project management, manufacturing design improvements and team leadership. Skill set includes Matlab, Allen Bradley (Fire & Gas) RS Logix 500, 5000, Factory Talk ME, Allen Bradley GuardLogix, Schneider Triconex, ABB (MCC and Process Control), Siemens (Compressor Control), Mark V, Mark Ve, Mark VI and Mark VIe Gas Turbine Control (Compression and Power Generation), Bentley Nevada 3500 and MS Office (Proficient in Excel, Word and Power Point). PROFESSIONAL EXPERIENCE Fircroft | Galeota Point, Trinidad & Tobago | Instrument, Controls & Electrical Operations Support Engineer (January 2019 to Present) • Provides safety leadership enforcing the Client's Health, Safety, and Environmental policies, procedures, and objectives to ensure that I and C designs are inherently safer, risks are reduced, meets HSSE requirements, increases overall equipment reliability, increasing production, and/or reducing the cost of production. • Provides Operation Support to resolving issues and overall instrument and control design efforts to BPCS, SIS (ESD, FGS, HIPPS, BMS), other third-party automation/SCADA systems and field instrumentation (final element and feedback devices). • Provides leadership, along with the operations team in providing cost effective solutions regarding instrument and controls defects and anomalies weighing overall risks to business, people and environment to realize savings to operations and maintenance costs. • Develops instrument design practices and philosophies including overall control schemes and shutdown philosophies. Develop and roll out emergency procedures in the area of Digital security to automation systems to operations team. • Ensures that appropriate design specifications and standards are being used in the design process. Ensures project design is consistent with the client's integrity management standard use of Guidance on Certification and industry standards. Assist with maintaining CMMS system (SAP) with necessary Proof test procedures for PMs for devices. Developing proper document control on SharePoint for proof record forms for SIF devices to build required data to measure performance of specific devices. S.M. Jaleel and Company Limited | South Oropouche, Trinidad & Tobago | Maintenance Manager (August 2017 to January 2019) • Schedule, train, supervise and motivate employees for the maintenance department • Coordinate work performed by outside vendors • Ensure efficient repair schedules and review repair cost estimates • Prioritize the maintenance and repairs of company equipment and parts • Control and monitor inventory • Ensure that all production equipment and utilities equipment are in proper working order • Implement safety policies and procedures for the department S.M. Jaleel and Company Limited | South Oropouche, Trinidad & Tobago | Electrical & Automation Manager (August 2017 to August 2018) • Performance and productivity: Achieve electrical engineering operational objectives by contributing electrical engineering information and recommendations to strategic plans and reviews • Focused Improvement: Develops strategic electrical plans by studying operational plans. • Performing Electrical projects: Plans electrical projects by determining specifications • Maintenance of Electrical Systems: Maintains electrical systems by establishing and enforcing preventive and on-going maintenance, and testing programs • Electrical Safety: Maintains safe and healthy work environment by establishing, following, and enforcing standards and procedures • Self-Improvement: Updates job knowledge by remaining current on codes and requirements • Financial: Meets electrical engineering financial objectives by forecasting electrical engineering requirements • H.R. Development: Manages team performance through training and professional development as it relates to the new electrical best practices and new technology People • Integrity • Excellence • Innovation

Hafiz Ali MBA (Logistics & Supply Chain Mgt), BSc (Instrumentation, Control & Electrical Engineering) PROFESSIONAL EXPERIENCE CONTINUED G.E. Oil & Gas| Trinidad & Tobago | Electrical, Controls & Instrumentation Field Service Engineer (May 2015 to June 2017) • Supported project development, installation and startup with process control input of gas turbines, generators and turbine control equipment • Identified and developed appropriate repair procedures for cost-sensitive, multi-million-dollar equipment • Troubleshooted, corrected and oversaw equipment upgrades and modernization • Performed upgrades from Mark V PLC controllers to Mark Ve PLC controllers • Performed logic changes (Functional blocks) • Performed replacement of instruments on gas turbine and compressors. Performed calibrations to respective instruments. • Performed construction, commissioning E C & I activities on BP TROC Project. • Managed work crews and other service professionals • Performed material management of inventory for spares and equipment for various subsystems • Participated and collaborated in HSSE activities such as Risk Assessments, HAZOP and Job Hazard Analysis BRITISH GAS TRINIDAD & TOBAGO| Trinidad & Tobago | Electrical, Controls & Instrumentation Maintenance Engineer (March 2015 to April 2015) • Organized spares for equipment, long term planning, replaced parts which were obsolete • Organized repair and synchronization for gas and diesel generators on Hibiscus Platform via both hardwire and Power Management System (PMS) • Owned responsibilities for management of work orders to be completed using CMMS (Maximo and SAP) QGC (SHELL)| Australia | Electrical, Controls & Instrumentation Commissioning Engineer (May 2014 to February 2015) • Performed SIS/PCS cause and effect testing and documenting both in field and control room with contractors (ABB and Siemens) • Conducted completion process activities (field and control room) from instrument test records, functional test records and safety integrity function tests through mechanical completion, project completion and start up completion • Support in the preparation of the commissioning and start up procedure • Performed fault finding and rectification in commissioning and start up activities • Conducted punch listing, walk downs, isolation and desolation of plant and equipment, local equipment start-up and shutdowns BRITISH GAS TRINIDAD & TOBAGO| Trinidad & Tobago | Electrical, Controls & Instrumentation Graduate Engineer (August 2012 to June 2014) • Developed engineering investigation requests at Beachfield and Central block sites • Conducted and verified controls for replacement Load Bank: The current load bank was corroded and non-functional • Designed and conducted installation of 24VDC Power Supply for Generators Control Supply • Designed and conducted Installation of Generator Controls Panel Enclosure & Installation of Purge Unit on Generator Controls Panel • Collaborated with functional teams and implemented Alarms Setpoint Change and Implementation of Logic Decision to Trigger Alarm (Alarm Management Report) • Developed, designed and performed Power Quality Metering S.M. Jaleel and Company Limited | South Oropouche, Trinidad & Tobago | Electrical and Computer Engineer (June 2010 to August 2012) • Performed Optimization of the speed of production lines by the use of Variable Frequency Drives • Developed Motor Asset Registry and Spare Motor Asset Registry • Developed of PLC Asset Register • Performed specifications sheets for soft starts and input line reactors. • Performed design and conducted installation of ladder type cable trays • Designed and implemented proper ventilation for Control Panels (Fans or Heating Ventilating Air Condition Systems) • Performed, planned and implemented a proper Electrical Motor Maintenance Program • Designed breakers and cables for certain loads (HP) using NEC codes and conducted installations • Performed application of NEMA and IP rating codes with respect to GFCI receptacles and enclosures for equipment • Designed transformer specifications and conducted installations • Implemented Lock Out Tag Out procedures • Design and implementation of Capacitor Banks for Power Factor Correction as well as Energy Savings (Reduction on Electricity Bill) People • Integrity • Excellence • Innovation

HAalefiezmAlMi ohammed MBA (Logistics & Supply Chain Mgt), BSc (Instrumentation, Control & Electrical Engineering) PROFESSIONAL DEVELOPMENT AND TECHNICAL PROFICIENCIES EDUCATION • Master of Business Administration (MBA) in Logistics & Supply Chain Management 2019| Australia Institute of Business | Australia • Bachelor of Science (BSc) in Electrical & Computer Engineering (2010) | University of The West Indies St. Augustine | Trinidad PROFESSIONAL MEMBERSHIPS & CERTIFICATIONS • Member | International Society of Automation (ISA) | Membership number: 000033740496 • Member | Association of Institute of Electrical and Electronic Engineers (IEEE) | Membership number: 95133663 • Certified Controls Field Service Engineer | GE Oil & Gas • Area Classification | UK • National Examination Board in Occupational Safety & Health, NEBOSH UK | Level 3 Certificate AREAS OF EXPERTISE Strategic planning | Project Management | Strong problem solving and analytical skills| Testing and quality assurance| Continuous improvement| Electrical systems & controls, electrical code | Specification review for electrical, controls and instrumentation| Audit CONTACT DETAILS Email Address | [email protected] | Telephone | +1 (868) 282-3152 | Address |123A Mon Desir Road, South Oropouche| Trinidad & Tobago | People • Integrity • Excellence • Innovation

Perdie Rampersad BSc (Mechanical), PMP, NACE CIP Level II, API 570 SUMMARY Dedicated mechanical engineer with more than 12 years of experience in project management, asset integrity management, contract , and quality assurance. Recognized for a keen ability to manage projects, improve design concepts, ensure deliverables are met during stringent deadline, and decrease the constant need for re-engineering. PROFESSIONAL EXPERIENCE Trinidad Offshore Fabricators (TOFCO) | La Brea, Trinidad & Tobago | Project Engineer (March 2019 to Present) Project Engineer for the fabrication of sub-sea jumpers for the ExxonMobil offshore production facility Guyana with the following •respImonpsriobvileitiefasb: rication sequences on site, to minimize fabrication times for well and flowline Jumpers, whilst maintaining the highest quality standards as outline in the scope of works. • Provide detailed analysis highlighting fabrication progress, evaluate trends, identify areas of concern, and opportunities for improvement in the project’s performance. • Monitor all aspects of third party planning and scheduling operations and ensure that adequate resources (labour, and equipment) are on time as reflected on the project schedule. • Hold regular meeting with the client and the client’s client key members to review the progress and resolve the conflicts. • Manage and supervises the site construction team to ensure adherence to construction contract documents and project specification. TOSL Engineering Limited | Marabella, Trinidad & Tobago | Mechanical Project Engineer (March 2017 to March 2019) • Identify resources and requirements, assign responsibilities and coordinate with team to ensure successful completion of projects whilst maintaining the highest quality and HSE standards. • Developed engineering plans, specifications and bid documents for plant equipment maintenance and refurbishment projects. • Managed the 8M dollar sea cooling water system upgrade project at Yara Tringen II Ammonia Plant that resulted in a 40% increase in productivity. Anti-Corrosion Technical Services | Freeport, Trinidad & Tobago | Project Manager (March 2015 to March 2017) • Reduced obstacles and variables to ensure optimal delivery of project scope, schedule and cost, which resulted in a 10% reduction in project delivery cost over runs. • Coordinated work activities with clients and client related departments to ensure work activities are completed according to the scope of works and specifications. • Developed and initiated projects, including managing costs, schedule and performance to ensure timely completion. Massy Wood Group| Port of Spain, Trinidad & Tobago | Project Engineer III (September 2011 to September 2013) • Managed multi-disciplined project team and sub-contractors and ensure projects were completed according to engineering design and standard practice • Oversee 3 construction projects through project planning and design and provided outstanding customer satisfaction. • Assertively maintains project schedule by monitoring project progress, coordinating activities, and resolving problems. People • Integrity • Excellence • Innovation

PAelredeime RMaomhpaemrsmaedd BSc (Mechanical), PMP, NACE CIP Level II, API 570 PROFESSIONAL EXPERIENCE CONTINUED Industrial Plant Services Limited (IPSL) | Point Lisas, Trinidad & Tobago | Mechanical Engineer (September 2005 to September 2011) • Effectively communicate and resolved critical plant issues within maintenance groups by seeking input from all stakeholders. • Read, interpreted and revised engineering drawings and technical drawings (P&IDs, Isometrics and PFDs) to reflect equipment upgrade and piping modifications. • Plan turnaround and shut-down work from scope development, estimating, MS Project scheduling, thru final field execution. • Provide technical leadership for contractors during equipment maintenance, changeout and upgrade, coordinate with inspection and operations personnel to resolve issues in a timely manner during turnarounds and shutdowns. PROFESSIONAL DEVELOPMENT AND TECHNICAL PROFICIENCIES EDUCATION • Bachelor of Science (BSc) in Mechanical Engineering (2005) | University of The West Indies St. Augustine | Trinidad PROFESSIONAL MEMBERSHIPS • Member | Project Management Professional (PMP) |PMP, Number# 2181716 • Member | NACE International | NACE CIP Level II, Certification# 68805 • Member | American Petroleum Institute (API) | API 570, Certification# 90972 AREAS OF EXPERTISE Project Management | Project Administration | MS Projects | MS Office Suite | Cost Analysis | Computer Aided Design (CAD) | Asset Integrity Management | JD Edwards | Painting and Coating Inspections | Develop Dossier Packages | Project Estimating. CONTACT DETAILS Email Address | [email protected] | Telephone | +1 (868) 306-2302 | Address |Grants Road, Rousillac | Trinidad & Tobago | People • Integrity • Excellence • Innovation

Hansraj Rambharose BSc (Mechanical) SUMMARY Visionary Senior Mechanical Engineer specializing in quickly resolving plant integrity issues and impressively providing engineering expertise to meet operations demand and budget constraints. Utilize technology to ensure safe and consistent plant productivity while working within available budgets. Apply strong leadership abilities while providing effective design oversight and strategic production guidance. PROFESSIONAL EXPERIENCE BPTT | Galeota, Trinidad & Tobago | Project Engineer (July 2017 to Present) • Team player ensuring that safety and integrity of piping design, adhere to engineering codes and standards • Engineering design of flow lines in accordance to API and ASME codes. (Working knowledge of API 6A, ASME 31.1, 31.2, 31.3) • Providing support to the offshore area engineering team and base management • Played a key role in assisting the operation team in vibration monitoring, for safe and successful start-up of Juniper platform Pyramid Engineering | Pont Lisas, Trinidad & Tobago | Operations Team Lead (November 2015 to July 2017) • Coordination of crane operation contract both offshore and onshore for a client in the oil & gas sector • Providing support for the client in planning PM, corrective and re-certification of offshore cranes • Provide quotations and supply of critical part in the shortest possible delivery time Perenco| Port of Spain, Trinidad & Tobago | Integrity Engineer (June 2013 to November 2015) • Implement new procedures and coordinate inspection testing/certification for offshore equipment in compliance with design standards (API 510, 560, 570 and 2C/2D) which yield increases productivity and reduce operational cost • Driver of one team, work closely with managers, planners, team members, vendors and contractors to ensure jobs are executed according to Repsol's offshore schedule • Conducted scope review meetings with Vendors, Planners, HSE and Offshore Leads to ensure work activities are executed Kentz-OJ’s E&I Services | Dow Village, Trinidad & Tobago | QA/QC Inspector (May 2011 to June 2013) • Implemented new strategies to reduce the time to develop dossier packages for the construction of the Trinidad Generation Unlimited plant • Successfully completed industrial and commercial construction projects with 100% client satisfaction • Ensure company adhere to the guide lines regarding company policies and procedures which resulted maximize productivity Ansa McAl Chemicals Limited | Point Lisas, Trinidad & Tobago | Packaging Engineer (November 2009 to November 2010) • Plan and executed projects to increase productivity and maximize profits including the installation of an automated packaging system • Standardize stock inventory policies and procedures and reduce downtime by 50% • Promote continuous running of the production line by enhanced plant reliability and improved efficiency from 40% to 95% People • Integrity • Excellence • Innovation

Hansraj Rambharose BSc (Mechanical) PROFESSIONAL EXPERIENCE CONTINUED Sadhna Petroleum Services Company Limited | Southern Main Road, Trinidad & Tobago | Reliability Engineer (January 2006 to December 2006) • Direct and manage the maintenance of all drilling equipment for both on and off shore services. Make recommendations for continuous improvement to maximize work out put • Generate work scopes for repairs and upgrades of rig equipment's • Coordinate with offshore management team, mechanical crew ,clients, craft technicians and operators to ensure effective and efficient execution of scheduled activities PROFESSIONAL DEVELOPMENT AND TECHNICAL PROFICIENCIES EDUCATION • Bachelor of Science (BSc) in Mechanical Engineering (2005) | University of The West Indies St. Augustine | Trinidad • Technical Diploma in Mechanical Engineering (2000) San Fernando Technical Institute, San Fernando | Trinidad AREAS OF EXPERTISE Vessel Inspection and Repairs| | Piping repairs and Inspection | MS Office Suite | Asset Integrity Management | Develop Dossier Packages | Project Estimating | Engineering design against ASME, ETP & API | Inspection testing and certification of offshore equipment | Project Scheduling | Risk Management |Statutory & Compliance Management | CONTACT DETAILS Email Address | [email protected] | Telephone | +1 (868) 306-2299 | Address |Grants Road, Rousillac | Trinidad & Tobago | People • Integrity • Excellence • Innovation

Arvin Ramdass BEng (Mechanical) SUMMARY Highly talented and skilled professional in the field of Mechanical Engineering with extensive knowledge, strong problem solving and project management skills. An innovative individual, enthusiastic with proven strengths in leadership and design. Possess certification in API 570 and working knowledge of applicable standards, such as ASME, ANSI, NFPA and API, in the Oil and Gas Industry PROFESSIONAL EXPERIENCE Fircroft | Port-of-Spain, Trinidad & Tobago | Consultant Mechanical Engineer (April 2018 to Present) Responsible for providing discipline engineering support for BPTT Maintenance and Engineering team as well as Campaign and Construction teams with adherence to applicable standards and client ETP documents. • Produce solutions that are safe, cost effective, fit for purpose and add value to both the company and client. • Ensure operational and maintenance issues are addressed in designs. • Execute surveys on BpTT regional assets to determine information and strategy to allow for execution of scopes of work. • Liaise with the discipline function lead to identify and implement improvements in discipline working practices. • Review procedures and engineering solutions from approved contractors to ensure that they are in adherence to engineering principles and applicable ASME/API standards. • Complete calculations, according to ASME B31.3 (Process piping code), ASME B31.8 (Gas Transmission and Distribution Piping Systems) and ASME Section VIII division 2 (Design and Fabrication of Pressure Vessels), to ensure pressure containment in order to allow for Fabric Maintenance activities and corrosion control. • Rectify anomalies according to ASME PCC-2 (Repair of Pressure Equipment and Piping) and record using Management of Change (MOC). • Review tasks and third party contractor scopes to ensure assigned work is within man-hour budget and schedule. IRP Fire & Safety Ltd | San Juan, Trinidad and Tobago | Mechanical Engineer / Project Engineer (August 2013 to April 2018) Responsible for overall project success and applying engineering principles to design various cost effective safety systems while adhering to client requirements. • Set up work structure for Engineers and technicians within that department, for the mutual benefit of the customer, employees and the Company • Plan, organize, direct and control the operations of the Mechanical Engineering team in accordance with policies, goals and objectives of the Company. • To prepare the design (meeting customer requirements, approved codes and practices, etc.), quotation, device quantities, scope of works, description of systems, operating philosophy, etc. for systems offered by IRP Fire & Safety Ltd. This includes (but not limited to) Fire Pumps, Foam Systems, Fire Trucks, Water Spray Systems, Clean Agent Systems, etc. • To review, comment and approve documents and Engineering Packages received from approved Contractors and Clients. • Promoting, complying with and enforcing safe work methods and adhering to HSE rules and regulations. • Resolve operational problems related to projects and minimize delays or unexpected cost increases. • Interpret client requirements, identify and address design parameters and engineering problems and ensure solutions are implemented accurately and within budget constraints. • Oversee project workflow and support internal and external resources to ensure timely delivery of projects, expected quality, and allotted budget. Lombardi Design and Manufacturing | Freeport, New York City, USA | Quality Engineer (September 2012 to June 2013) Test and inspect products at various stages of the production process, compiling and evaluating statistical data to determine and maintain the quality and reliability of the product. • Assist in preparing data analysis and assessment for management decisions, affecting plant/facility quality control operations. • Instruct operational staff in inspections, quality control use and interpretation. Record and maintain test data using statistical procedures preparing data and graph forms while assisting in the product development cycle. • Assist plant technicians in rectifying production problems involved in the injection-molding process. People • Integrity • Excellence • Innovation

Arvin Ramdass BEng (Mechanical) PROFESSIONAL EXPERIENCE CONTINUED Mitsubishi Heavy Industries Limited | La Brea, Trinidad | Approximate Value of Project: $1,000,000 USD Mechanical/ Project Engineer (November 2016 to March 2018) • Generation and approval of mechanical design and engineering documents such as P&IDs, Inspection procedures, Isometric and general arrangement drawings pertaining to Life Safety systems at Caribbean Gas Chemicals Limited Methanol plant. • Accountable for project management and execution from initial design to completion while ensuring that systems meet applicable API, NFPA and ASME standards Delta Petroleum | Anguilla | Approximate Value of Project: $541,000 USD Mechanical/ Project Engineer (January 2015 to August 2016) • Designed a full Fire Protection System for client’s Fuel Tank Farm including deluge sprinkler and foam protection as well as water/foam hydrants for the facility. • Designed system using sound engineering principles involving fluid dynamics, strength of materials and materials science to produce Hydraulic reports, Piping and Instrumentation diagram, system topology drawings and material stress/strain reports caused by external pipe loads. • Liaised with installation contractor on project execution and developed procedure and high level project schedule Shell Trinidad Limited | Port-of-Spain, Trinidad | Approximate Value of Project: $13,500,000 TTD Mechanical Engineer (August 2013 to February 2015) • Supervise and lead installation and commissioning of Vertical Turbine Firewater Pump on Dolphin Offshore Platform. Developed and executed procedures for maintenance and long term storage of Firewater pumps and associated equipment British Petroleum Trinidad & Tobago LLC | Port-of-Spain, Trinidad | Approximate Value of Project: $15,500,000 TTD Mechanical Engineer (August 2013 to December 2014) • Assisted foreign vendor representative with the installation and commissioning of Terminal Firewater Pumps and associated equipment. • Supervised repair/modification works conducted by external contractors and supervised Hydro testing of Air Receiver Tank according to ASME Pressure Vessel Code. Inspected works completed by contracted, certified Machine Shop ensuring that equipment adhered to highest quality and engineering standards. PROFESSIONAL DEVELOPMENT AND TECHNICAL PROFICIENCIES EDUCATION • Bachelor of Engineering (BEng) in Mechanical Engineering (2012) | City College of New York (CUNY) | New York | USA PROFESSIONAL MEMBERSHIPS • Member | American Society of Mechanical Engineers (ASME) • API 570 Piping Inspector | (Cert ID: 90973, Expiry Date: 07/31/2022) AREAS OF EXPERTISE Static Mechanical Design | Rotating Equipment Troubleshooting | Hydraulic Calculation Analysis for Firewater Systems | Scheduling | Fire Protection Systems Design and Life Safety Systems | Computer Aided Design (CAD) | Asset Integrity Management | Project Management CONTACT DETAILS Email Address | aramdas01@ yahoo.com | Telephone | +1 (868) 381-3990 | Address | El Dorado, Trinidad & Tobago | People • Integrity • Excellence • Innovation

Want more information? We’re here to answer your questions Get in touch with us. Contact Us www.atsltrinidad.com [email protected] Ravie Oudit President & Senior Engineer Copyright © 2020 Arrow Technical Services Ltd. All Rights Reserved 118 Nolan Street, Felicity Chaguanas, Trinidad Tel: +1 868 720 1353