T&S Ceramic 2020 catalog_Direct

TILE & STONE Ceramic & Natural Stone Product Guide Heirloom, 500 Sterling (8\" × 36\") Universe, 120 Calacatta (12\" × 24\") Oasis, 500 Light Grey (12\" × 24\") Arena, 100 Bone shawfloors.com direct 03.13.2020 HS-317901-18

TILE & STONE Ceramic & Natural Stone Product Guide CERAMIC NATURAL STONE FEATURES & BENEFITS NEW! 2020 Arena Turnbury Warranty Cameo CDI Classic Brick DCOF Cosmopolitan PEI NEW! 2020 FORMATS Elegance Shade & Texture Rating (Porcelain Accents) Empire NEW! 2020 COLOR Heirloom Islander NEW! 2020 Lane Avenue Oasis Olympia Plank NEW! 2020 Regent Rhythm St. Pete NEW! 2020 Stonework NEW! 2020 Universe NEW! 2020 Utopia 2

TILE & STONE ARENA ceramic 100 Bone 150 Silver 500 Grey 3 BACK TO TABLE OF CONTENTS

ARENA TILE & STONE Style Number 221TS 220TS 219TS 222TS 238TS Construction ceramic ceramic ceramic ceramic ceramic Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 12\" × 24\" 17\" × 17\" 13\" × 13\" 2.75\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group 4 4 4 4 4 Break Strength 350 lbs. 350 lbs. 350 lbs. N/A N/A Water Absorption % 3–6 3–6 3–6 3–6 3–6 DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V2 V2 V2 V2 V2 Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Bone 150 Silver 500 Grey 4 BACK TO TABLE OF CONTENTS

TILE & STONE CAMEO ceramic 500 Agate 550 Quartz 700 Jasper 5 BACK TO TABLE OF CONTENTS

CAMEO TILE & STONE Style Number CS09X CS08X CS07X CS11X CS10X Construction ceramic ceramic ceramic ceramic ceramic Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 12\" × 24\" 17\" × 17\" 13\" × 13\" 2.75\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group 4 4 4 4 4 Break Strength > 300 lbs. > 300 lbs. > 300 lbs. > 300 lbs. > 300 lbs. Water Absorption % 3–6 3–6 3–6 3–6 3–6 DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V3 V3 V3 V3 V3 Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 500 Agate 550 Quartz 700 Jasper CS10X mosaic 500 Agate 550 Quartz 700 Jasper 6 BACK TO TABLE OF CONTENTS

TILE & STONE CLASSIC BRICK ceramic 120 Manor 150 Cottage 170 Farmhouse 790 Warehouse Blend 7 BACK TO TABLE OF CONTENTS

CLASSIC BRICK TILE & STONE Style Number CS93Z Construction ceramic Tile Type wall Tile Size 2.25\" × 7.62\" Technical Wear Rating Group N/A Break Strength >250 Water Absorption % 3.76 DCOF N/A Shade Variation V2, V3* Installation Area Walls * 790 Warehouse Blend – V3 A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 120 Manor 150 Cottage 170 Farmhouse 790 Warehouse Blend* 8 BACK TO TABLE OF CONTENTS

TILE & STONE COSMOPOLITAN ceramic 550 London Fog 950 Chimney Smoke 150 Snow Crest 510 Silver Frost 9 BACK TO TABLE OF CONTENTS

COSMOPOLITAN TILE & STONE Style Number CS84Z CS85Z Construction ceramic ceramic Tile Type wall tile wall bullnose Tile Size 4\" × 12\" 4\" × 12\" Technical Wear Rating Group N/A N/A Break Strength > 110 > 110 Water Absorption % 16 16 DCOF N/A N/A Shade Variation V3 V3 Installation Area Walls Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 150 Snow Crest 510 Silver Frost 550 London Fog 950 Chimney Smoke 10 BACK TO TABLE OF CONTENTS

TILE & STONE ELEGANCE ceramic wall tile | porcelain accents CS63P | Pinwheel | 190 White w/ Black Dot CS64P | Basketweave | 190 White w/ Black Dot CS62P | 2\" × 2\" with Dot | 100 White CS61P | Hexagon | 190 White w/ Black Dot 11 BACK TO TABLE OF CONTENTS

ELEGANCE TILE & STONE CS61P Hexagon Mosaic 1\" Porcelain Matte Finish 10\" × 12\" sheet floors, walls, exteriors 100 White 190 White w/ Black CS62P 2\" × 2\" Dot Mosaic Porcelain Matte Finish 12\" × 12\" sheet floors, walls, exteriors 100 White 190 White w/ Black CS63P Pinwheel Mosaic Porcelain Matte Finish 12\" × 12\" sheet floors, walls, exteriors 190 White w/ Black CS64P Basketweave Mosaic Porcelain Matte Finish 12\" × 12\" sheet floors, walls, exteriors 190 White w/ Black CS01Z Hexagon Mosaic 2\" Porcelain Matte Finish 12\" × 12\" sheet floors, walls, exteriors 100 White 190 White w/ Black CS00Z 4\" × 4\" Dot Mosaic Porcelain Matte Finish 12\" × 12\" sheet floors, walls, exteriors 190 White w/ Black 12 BACK TO TABLE OF CONTENTS

TILE & STONE ELEGANCE ceramic wall tile | porcelain accents CS65P | Penny Round | 101 Biscuit CS68P | Beveled Diamond | 500 Warm Grey CS67P | Lantern | 500 Warm Grey CS66P | Mini Brick | 100 White 13 BACK TO TABLE OF CONTENTS

ELEGANCE TILE & STONE CS66P Mini Brick Mosaic Porcelain Gloss Finish 11.5\" × 11\" sheet 100 White 101 Biscuit 500 Warm Grey walls, exteriors CS65P Penny Round Mosaic Porcelain Gloss Finish 12\" × 12\" sheet walls, exteriors 100 White 101 Biscuit 500 Warm Grey CS67P Lantern Mosaic Porcelain Gloss Finish 10\" × 11.5\" sheet walls, exteriors 100 White 101 Biscuit 500 Warm Grey CS68P Beveled Diamond Mosaic Porcelain Gloss Finish 10\" × 12.9\" sheet 100 White 101 Biscuit 500 Warm Grey walls, exteriors CS37L 2\" × 2\" Mosaic Porcelain Matte Finish 12\" × 12\" × 2\" floors, walls, exteriors 100 White 101 Biscuit 200 Linen 500 Warm Grey 550 Taupe 14 BACK TO TABLE OF CONTENTS

TILE & STONE ELEGANCE ceramic wall tile | porcelain accents 258TS | 3\" x 6\" Matte Wall Tile | 100 White 218TS | 4\" x 12\" Beveled Gloss Wall Tile | 100 White CS36L | 4\" x 16\" Gloss Wall Tile | 550 Taupe 15 BACK TO TABLE OF CONTENTS

ELEGANCE TILE & STONE Style Number CS34L CS35L CS36L CS85M 258TS 259TS 270TS Construction ceramic ceramic ceramic ceramic ceramic ceramic ceramic Tile Type wall bullnose wall bullnose wall bullnose wall Tile Size 3\" × 6\" 3\" × 6\" 4\" × 16\" 4\" × 16\" 3\" × 6\" 3\" × 6\" 4\" × 16\" Finish gloss gloss gloss gloss matte matte matte 217TS 3\" × 6\" Beveled Wall Ceramic Gloss Finish 100 White walls 218TS 4\" × 12\" Beveled Wall 100 White Ceramic Gloss Finish walls CS34L 3\" × 6\" Wall Ceramic Gloss Finish 100 White 101 Biscuit 200 Linen 500 Warm Grey 550 Taupe walls ALSO AVAILABLE IN MATTE FINISH: 258TS, COLOR 100 WHITE ONLY CS36L 4\" × 16\" Wall 100 White 101 Biscuit 200 Linen 500 Warm Grey 550 Taupe Ceramic Gloss Finish ALSO AVAILABLE IN MATTE FINISH: 270TS, COLOR 100 WHITE ONLY walls NOTE: When installing tile 16\" long or greater in brick pattern, overlap should not exceed 33%. A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - For additional information, refer to Factors to Consider. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. The basis of a beautiful kitchen! This collection starts with the classic 3\" × 6\" wall tile and adds an exciting new size and shape — 4\" × 16\" — for an elegant, modern look. Mosaics and coordinating bullnose round out the series. − Wall Tile − Gloss Mosaics Ceramic with glossy or matte finish Porcelain: Suitable for walls Perfect for kitchen backsplashes and shower walls − Bullnose Ceramic with glossy or matte finish − Matte Mosaics Porcelain: Suitable for floors CS35L buLLnoSe muSt be uSed with 3\" × 6\" GLoSS waLL tiLe and walls CS85m buLLnoSe muSt be uSed with 4\" × 16\" GLoSS waLL tiLe 259tS buLLnoSe muSt be uSed with both 3\" × 6\" matte and 4\" × 16\" matte waLL tiLe 16 BACK TO TABLE OF CONTENTS

TILE & STONE EMPIRE ceramic 100 Cream | Backsplash – Mixed-Up CS59L 200 Latte 500 Surf 700 Cafe 17 BACK TO TABLE OF CONTENTS

EMPIRE TILE & STONE Style Number CS75Q CS74Q CS73Q CS98Q CS99Q CS0J4 Construction ceramic ceramic ceramic ceramic ceramic ceramic Tile Type floor tile floor tile floor tile bullnose mosaic floor tile Tile Size 12\" × 24\" 17\" × 17\" 13\" × 13\" 2.75\" × 13\" 13\" × 13\" × 2\" 6\" × 6\" Technical Wear Rating Group 4 4 4 4 4 4 Break Strength 350 lbs. 350 lbs. 350 lbs. 350 lbs. 350 lbs. 350 lbs. Water Absorption 3-6% 3-6% 3-6% 3-6% 3-6% 3-6% DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V3 V3 V3 V3 V3 V3 Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Cream 200 Latte 500 Surf 700 Cafe 100 Cream 200 Latte 500 Surf 700 Cafe 100 Cream 200 Latte 500 Surf 700 Cafe 18 BACK TO TABLE OF CONTENTS

TILE & STONE HEIRLOOM ceramic 700 Pendant 750 Hope Chest 500 Sterling 770 Silhouette 150 Fine China 19 BACK TO TABLE OF CONTENTS

HEIRLOOM TILE & STONE Style Number CS39Z CS38Z Construction ceramic ceramic Tile Type floor tile floor tile Tile Size 8\" × 36\" 7\" × 22\" Technical Wear Rating Group 3 3 Break Strength > 330 lbs. > 330 lbs. Water Absorption % 3-6 3-6 DCOF > 0.42 > 0.42 Shade Variation V3 V3 Installation Area Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 150 Fine China 500 Sterling 700 Pendant 750 Hope Chest 770 Silhouette 20 BACK TO TABLE OF CONTENTS

TILE & STONE ISLANDER ceramic tile 178 Sandbar 458 Salt Water 410 Blue Daze 21 BACK TO TABLE OF CONTENTS

ISLANDER TILE & STONE Style Number CS78X CS79X CS50Z Construction ceramic ceramic ceramic Tile Type wall tile wall bullnose floor & wall tile Tile Size 3\" × 6\" 1\" × 6\" 8\" × 8\" Technical Wear Rating Group N/A N/A 3 Break Strength > 120 lbs. > 120 lbs. > 290 lbs. Water Absorption % < 20 < 20 < 3 DCOF N/A N/A > 0.42 Shade Variation V3 V3 V3 Installation Area Walls Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 3\" × 6\" wall tile 158 Seashell 178 Sandbar 458 Salt Water 8\" × 8\" tile 641 Garden Way 178 Sandbar 410 Blue Daze 22 BACK TO TABLE OF CONTENTS

TILE & STONE LANE AVENUE ceramic wall tile 111 Arctic 450 Lullaby Wave 4\" x 16\" | 400 Deep Sea with 3\" x 6\" | 111 Arctic 23 BACK TO TABLE OF CONTENTS

LANE AVENUE TILE & STONE Style Number 313TS 314TS (Wave) 315TS 316TS 317TS Construction ceramic ceramic ceramic ceramic ceramic Tile Type wall tile wall tile wall tile pencil bullnose quarter round Tile Size 4\" × 16\" 4\" × 16\" 3\" × 6\" 0.4\" × 8\" 1\" × 6\" Technical Wear Rating Group NA NA NA NA NA Break Strength > 200 > 200 > 200 > 200 > 200 Water Absorption > 10 > 10 > 10 > 10 > 10 DCOF N/A N/A N/A N/A N/A Shade Variation V1 V1 V1 V1 V1 Installation Area Walls Walls Walls Wall Trim Wall Trim A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 102 Vanilla 111 Arctic 250 Safari 400 Deep Sea 450 Lullaby 501 Sidewalk 555 Storm 590 Midnight 314TS 102 Vanilla 111 Arctic 250 Safari 400 Deep Sea 450 Lullaby 501 Sidewalk 555 Storm 590 Midnight 24 BACK TO TABLE OF CONTENTS

TILE & STONE OASIS ceramic 100 Bone 200 Beige 500 Light Grey 570 Dark Grey 23 BACK TO TABLE OF CONTENTS

OASIS TILE & STONE Style Number CS72Q CS71Q CS70Q CS96Q CS97Q Construction ceramic ceramic ceramic ceramic ceramic Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 12\" × 24\" 17\" × 17\" 13\" × 13\" 2.75\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group Multiple* Multiple* Multiple* Multiple* Multiple* Break Strength 350 350 350 350 350 Water Absorption 3-6% 3-6% 3-6% 3-6% 3-6% DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V3 V3 V3 V3 V3 Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls * colors 100 and 200 – 4; other colors – 3 A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Bone 200 Beige 500 Light Grey 570 Dark Grey CS97Q 13\" × 13\" × 2\" mosaic 100 Bone 200 Beige 500 Light Grey 570 Dark Grey 24 BACK TO TABLE OF CONTENTS

TILE & STONE OLYMPIA PLANK ceramic 100 White 170 Sand 200 Natural 500 Ash 700 Brown 25 BACK TO TABLE OF CONTENTS

OLYMPIA PLANK TILE & STONE Style Number CS71W CS68Q Construction ceramic ceramic Tile Type field tile field tile Tile Size 8\"×36\" 7\"×22\" Technical Wear Rating Group 3 3 Break Strength > 330 lbs. > 330 lbs. Water Absorption % 3-7 3-7 DCOF >0.42 >0.42 Shade Variation V3 High V3 High Installation Area Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 White 170 Sand 200 Natural 500 Ash 700 Brown 26 BACK TO TABLE OF CONTENTS

TILE & STONE REGENT ceramic 100 Snow 500 Platinum 550 Silver 200 Blonde 29 BACK TO TABLE OF CONTENTS

TILE & STONETILE & STONE REGENT Style Number 290TS 291TS Construction ceramic ceramic Tile Type floor tile floor tile Tile Size 7\" × 22\" 8\" × 36\" Technical Wear Rating Group 4 4 Break Strength 305 lbs 305 lbs Water Absorption % 3-7% 3-7% DCOF > 0.42 > 0.42 Shade Variation V2 V2 Installation Area Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Snow 200 Blonde 500 Platinum 550 Silver 30 BACK TO TABLE OF CONTENTS

TILE & STONE RHYTHM ceramic wall tile 101 Smooth Jazz 100 New Age 102 Hip Hop 27 BACK TO TABLE OF CONTENTS

RHYTHM TILE & STONE Style Number CS46Z CS47Z Construction ceramic ceramic Tile Type wall tile bead Tile Size 12\" × 24\" 0.5\" × 12\" Edges rectified rectified Technical Wear Rating Group 3 3 Break Strength > 230 > 230 Water Absorption % < 10 < 10 DCOF N/A N/A Shade Variation V1 V1 Installation Area Walls Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 New Age 101 Smooth Jazz 102 Hip Hop 100 White 28 BACK TO TABLE OF CONTENTS

TILE & STONE ST. PETE ceramic 100 Gulf 200 Tabby 500 Pier 29 BACK TO TABLE OF CONTENTS

ST. PETE TILE & STONE Style Number CS97W CS86L CS85L CS87L CS89L CS91L Construction ceramic ceramic ceramic ceramic ceramic ceramic Tile Type floor floor tile floor tile floor tile surface bullnose mosaic Tile Size 12\" × 24\" 17\" × 17\" 13\" × 13\" 6\" × 6\" 2.75\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group 4 4 4 4 4 4 Break Strength > 250 412 lbs. 304 lbs. 412 lbs. 304 lbs. 304 lbs. Water Absorption % 3–6 3–6 3–6 3–6 3–6 3–6 DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V2 V2 V2 V2 V2 V2 Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Gulf 200 Tabby 500 Pier CS91L 13\" × 13\" × 2\" Mosaic 100 Gulf 200 Tabby 500 Pier 30 BACK TO TABLE OF CONTENTS

TILE & STONE STONEWORK ceramic 200 Beige 700 Brown 500 Grey 31 BACK TO TABLE OF CONTENTS

STONEWORK TILE & STONE Style Number 243TS 244TS 245TS 262TS 263TS Construction ceramic ceramic ceramic ceramic ceramic Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 13\" × 13\" 17\" × 17\" 12\" × 24\" 3\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group 4 4 4 4 4 Break Strength > 250 > 250 > 250 > 250 > 250 Water Absorption % 3 – 6 3 – 6 3 – 6 3 – 6 3 – 6 DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V2 V2 V2 V2 V2 Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 200 Beige 500 Grey 700 Brown 32 BACK TO TABLE OF CONTENTS

TILE & STONE UNIVERSE ceramic 120 Calacatta 150 Carrara 33 BACK TO TABLE OF CONTENTS

UNIVERSE TILE & STONE Style Number 249TS 250TS 251TS 264TS 265TS Construction ceramic ceramic ceramic ceramic ceramic Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 13\" × 13\" 20\" × 20\" 12\" × 24\" 3\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group 4 4 4 4 4 Break Strength > 250 lbs. > 250 lbs. > 250 lbs. > 250 lbs. > 250 lbs. Water Absorption % 3–6 3–6 3–6 3–6 3–6 DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V3 V3 V3 V3 V3 Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 120 Calacatta 150 Carrara 34 BACK TO TABLE OF CONTENTS

TILE & STONE UTOPIA ceramic 150 White 250 Beige 520 Grey 35 BACK TO TABLE OF CONTENTS

UTOPIA TILE & STONE Style Number 246TS 247TS 248TS 260TS 261TS Construction ceramic ceramic ceramic ceramic ceramic Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 13\" × 13\" 20\" × 20\" 12\" × 24\" 3\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group 4 4 4 4 4 Break Strength > 250 > 250 > 250 > 250 > 250 Water Absorption % 3 – 6 3 – 6 3 – 6 3 – 6 3 – 6 DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V3 V3 V3 V3 V3 Installation Area Floors, Walls Floors, Walls Floors, Walls Floors, Walls Floors, Walls A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 150 White 250 Beige 520 Grey 36 BACK TO TABLE OF CONTENTS

TILE & STONE TURNBURY natural stone 150 Latte Brick Mosaic 200 Ivory 3×6 Turnbury | 126 Seaside Boca 4\" Hexagon 700 Noce 3×6 37 BACK TO TABLE OF CONTENTS

TURNBURY TILE & STONE Field Tile Latte Ivory Noce Accent Tile Latte Ivory Noce 4\" × 4\" CS70J CS61J CS62J 12\" × 12\" × 2\" × 2\" Mosaic CS78H CS77H CS81H 3\" × 6\" CS76H CS73H CS79H 2\" × 12\" Briarcliff (honed & filled) Chair Rail CS22J CS14J CS29H 1\" × 12\" Briarcliff (honed & filled) Pencil Liner CS23J CS15J CS29J 3\" × 12\" Turnbury Listello CS75H Multi-Color 101 Installation Floors, Floors, Floors, Area Walls Walls Walls Variation V3 High V3 High V3 High It is important to note that any natural stone hard surface flooring can become slippery when wet or improperly maintained. Unless specifically stated by Shaw Industries, Inc. the use of Shaw Industries, Inc. natural stone is not recommended for exterior horizontal surfaces. This product can be used in interior wet areas if sealed and maintained properly. The stone look could be altered if not maintained properly. For information about products that can protect the stone from moisture exposure contact your local Shaw hard surface territory manager. This product may contain dry seams, pits, fossils and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these veins can sometimes lose their fillings, they should be refilled as part of normal maintenance. A sealer is recommended for all natural stone products. - Note: Natural stone is a product of nature, hence variations in shade and appearance are inherent. Veining and mineral deposits create unique characteristics per stone. Please consider at the time of purchase… No Two Stones Are Alike! Installation constitutes acceptance. Colors Mosaic Listello Premium Grade Color is true and consistent throughout and represents the truest 101 Multi form of the stone. Little to no veining or surface imperfections are found. Premium Grade offers the most consistent coloration along with the smallest pits. 150 Latte 150 Latte 200 Ivory 200 Ivory 700 Noce 700 Noce 38 BACK TO TABLE OF CONTENTS

TILE & STONE WARRANTY The following is the limited warranty Please Note: Shaw does not grant to to slip resistance, wear-time period, issued by Shaw® Industries Group, any person or entity the authority to gloss or maintenance procedures. Test Inc. (“Shaw”) for Shaw Tile & Stone create for it any obligation or liability procedures and individual results are products. Shaw warrants that its first in connection with this product. Shaw available from Shaw. quality tile and stone products are shall not be liable to the consumer ANSI A-137.1 manufactured according to ANSI or any other person or entity for any Shaw tile achieves the necessary 137.1-2012 and meet or exceed these incidental, special or consequential values for the ANSI A-137.1 (American requirements. damages, arising out of breach of this National Standards Institute) What the Shaw Tile & Stone Flooring limited warranty or any implied limited requirement. This is the most warranty (excluding merchantability). Limited Warranty Covers: All implied warranties are hereby complete testing done on ceramic This Tile & Stone product has limited to the duration of this limited tile and includes tests on thickness, been manufactured in accordance warranty. Some states do not allow facial dimension, warpage, edging, with industry standards and is the exclusion or limitation of implied water absorption, crazing, thermal manufactured to last a lifetime with shock, bonding strength and breaking proper care and maintenance. All warranties or the limitation of strength. first quality Tile & Stone from Shaw is incidental or consequential damages, Installation Consideration: warranted to be free of defects in the so the above limitations or exclusions • Water, oil, grease, etc. create slippery quality of the product for one year may not apply to the purchaser. This conditions. Floor applications with from date of purchase. This warranty warranty gives the purchaser specific exposure to these conditions require legal rights, such rights may vary applies to products used in residential from State to State. This warranty is extra caution in product selection. applications only for as long as the effective for all shipments after August original purchaser owns and resides 1, 28. Contact Shaw for complete • Latex modified thin-set in the home where the product was warranty information. recommended for all Porcelains. installed. Installation and Reference Materials • For highly slip resistant, through Each Limited Shaw Tile & Stone Installation procedures recommended body, and unglazed Porcelain tiles, Flooring Warranty is subject to the are those indicated in the current special care should be taken when following conditions: Handbook for Ceramic Tile Installation grouting with dark pigmented colors. This limited warranty is valid only in as published by the Tile Council of A grout release is recommended to North America. The warranty is not prevent finely powdered pigments transferable. It extends only to the America, Inc. Specification references from lodging in the pores of the tile original retail purchaser. This limited recommended are those established surface. warranty applies only where the in the American National Standard affected area of the Shaw Tile & Stone Specifications for the installation • Tiles should be selected and mixed Flooring is visible. The flooring must of ceramic tile, as published by the from multiple cartons and shading Tile Council of America, Inc. Due be installed in accordance with Shaw’s consideration must be taken with arrangement planned prior to recommended installation instructions. regard to the subsurface, intended use installation. This limited warranty shall not apply of the tile surface, and exposure to • Special consideration needs to be to damage arising from any of the foreign substances such as water, oil, given when installing tiles 20\" and following: acid, etc., when selecting the type of larger. • Accidents, abuse or misuse setting material and grout. If in doubt, the manufacturer of these setting • Pre-grout sealing is recommended • Improper installation when installing all natural stone materials should be consulted. decorative accents. This prevents • Exposure to extreme heat Shade Variations grout from staining the stone • Improper care and maintenance Due to inherent variations associated during the grouting process, and with quarried stone and naturally to ease in grout clean-up. After • Scratch, impact or cutting fired tile & stone products, color installation, sealing of the stone • Freight and texture variations from samples will reduce porosity and increase should be expected. Blending of tiles stain resistance. Use a penetrating • Modification, alterations, repair or from at least six different cartons or surface coating type of sealer, service by a non authorized floor during installation is recommended, depending on desired aesthetic. covering dealer as shine/finish can differ under certain lighting conditions. Prior to • Once the tile has been cleaned and • Problems caused by structural installation, tile and stone should be dried after installation, grout joints movement/deficiencies in the base approved by customer. No claims for should be treated with a sealer. of subfloor shade or texture will be honored after Grout is porous and sealing it will installation. simplify future maintenance (epoxy grouts do not require a sealer). We Limits of Liability recommend you apply a sealer at Tests are performed on random least twice a year for maximum stain samples of Shaw tile by an protection. independent testing laboratory and are believed to be representative of the general quality of the tile. There is no guarantee by Shaw that these exact results will be guaranteed on every tile. Shaw extends no guarantees, expressed or implied, as shawfloors.com direct 03.13.2020 HS-317901-18

Clarity Digital Imaging Clarity Digital Imaging is the newest technology for applying glaze and design to manufactured tile products. This technology creates more realistic visuals, improved color saturation, and fewer pattern repeats. The most common traditional glazing application uses rotocolor methods (rotating silicon drums are infused with liquid glaze that are rolled onto the tile creating the pattern and texture). This method creates a two dimensional visual and because of the method a pattern repeat can be more obvious and occur more often. Also the ability of the glaze to reach the surface edges and heavy textures can be a challenge. Clarity Digital Imaging is similar to high definition ink jet printing. High tech digital machinery controls every element of the application process. The glaze is applied in multiple layers using spray nozzles and offers ultimate precision and attention to detail. The ability to manipulate where the glaze is applied on each tile reduces the number of pattern repeats, and as a result, one product can have 40 to 60 different faces—resulting in up to 10× more graphic variation. The choice is clear, Clarity Digital Imaging by Shaw Tile & Stone. PEI Ratings Group 5 Group 3 Recommended for all interior residential and heavy Recommended for all interior residential and light commercial uses. commercial uses. Group 4 Group 2 Recommended for all interior residential and moderate Recommended for all walls and bathroom floors where commercial uses. softer footwear is worn. Group 1 Recommended for residential interior walls. Shade & Texture Ratings V1 LOW V2 MODERATE Low shade and texture variations within each carton Distinguishable differences in texture and pattern within each color V3 HIGH High shade and texture variations within each carton. V4 RANDOM Random variations of shade and texture within each carton. IMPORTANT: It is imperative that tiles from various cartons be continually blended during installation to insure optimum appearance. shawfloors.com direct 03.13.2020 40 HS-317901-18 BACK TO TABLE OF CONTENTS

What is DCOF? TILE & STONE Stricter, More Accurate Testing Results In Superior Tile Products In 2012 the Tile Council of North America DCOF as measured by the more reliable (in (TCNA) adopted the ANSI A137.1 test protocol terms of, safety) DCOF AcuTest. This means known as the DCOF AcuTest for assessing that tiles suitable for level interior spaces ceramic tile slip resistance for interior expected to be walked upon when wet should application. Shaw Tile & Stone has embraced have a DCOF (Dynamic Coefficient of Friction) the TCNA’s new standards for measuring value of 0.42 or greater replacing the previous a tile’s frictional resistance as it is closely 0.60 SCOF (Static Coefficient of Friction) related to traction and slipperiness. The DCOF rating over a wet tile surface per the ASTM C AcuTest does not measure the flooring itself 1028 test method. It is Shaw’s commitment to but, how the tester, lubricant (sodium lauryl our customers to provide accurate information sulfate solution) and tile surface interact which for our tile products that ensure this new COF more accurately simulates the conditions of criteria in the ANSI A137.1 standard is met and people walking on tile and provides a useful maintained such that Shaw, Shaw Customers comparison of tile surfaces. The threshold and End Users collectively, do our part to requirement (based on extensive research in minimize any potential for slips and falls in Europe and by TCNA) in the American National residential and commercial interiors. Standards Institute’s (ANSI) A137.1 is 0.42 Shaw Industries, Inc. P.O. Drawer 2128 Dalton, GA 30722-2128 800-441-7429 shawfloors.com direct 03.13.2020 41 HS-317901-18 BACK TO TABLE OF CONTENTS

Any questions or corrections to catalog should be sent to [email protected]. shawfloors.com direct 03.13.2020 42 HS-317901-18 BACK TO TABLE OF CONTENTS