2020 Online Catalogue-Tabbed

PRODUCT CATALOGUE 2020



CONTENTS TECHNICAL INFORMATION........................................ 8 HYDRAULINK BRANDED HOSES.............................27 HYDRAULIC HOSES.................................................49 SWAGE COUPLINGS................................................96 SWAGE FERRULES................................................194 FIELD ATTACHABLE HOSETAILS............................205 FIELD ATTACHABLE FERRULES.............................220 PUSH-ON COUPLINGS..........................................225 R5 FIELD ATTACHABLES........................................238 SUCTION HOSETAILS............................................255 ADAPTORS............................................................266 TUBE FITTINGS......................................................390 STEEL PIPE AND TUBE..........................................404 TUBE CLAMPS.......................................................410 QUICK RELEASE COUPLINGS...............................417 BALL AND CHECK VALVES....................................453 ACCESSORIES.......................................................459 MINICHECK AND TEST..........................................512 SAWS AND SWAGERS...........................................525 STAINLESS STEEL FITTINGS.................................535

HydraCrimp Hydraulink HydraCrimp is an easy to use app AVAILABLE NOW ON that provides users of Hydraulink hydraulic hose and fitting products to access up-to- date crimp specifications quickly. The app is designed to easily and quickly provide all the information required to correctly setup and crimp the selected hose and fitting. It also includes the option to select from a range of hose protection products with part numbers. Hydraulink HydraCrimp is available on both Android and Apple devices. 4 PRODUCT CATALOGUE 2020

HydraTag Improves productivity and operational reliability to save you time and money. Hydraulink’s HydraTag is a comprehensive tagging system that catalogues the exact specifications and technical information for each hydraulic hose used on your machinery. This chipped tag then provides data via a secure access portal, complete with regular reporting that highlights any hoses that require replacement, prior to failure. AVAILABLE NOW ON

TJOEOUAIRNM Hydraulink are on the hunt for new franchisees to join our team. As the demand for automation and machinery increases, so does the number of breakdowns, and that’s where you come in. We need loyal, dedicated hard workers to join our team and help us keep our clients ticking along smoothly. FOR MORE INFORMATION VISIT joinhydraulink.com

MOBILE RESPONSE 24/7 1300 36 37 34 CAIRNS 145 Scott Street Bungalow QLD 07 4041 6614 WESTERN AUSTRALIA QUEENSLAND 27-29 Canvale Road 1/1927 Ipswich Road Canning Vale WA Rocklea QLD 08 9455 9800 07 3713 6200 SOUTH AUSTRALIA 40 Millers Road Wingfield SA 1300 363 734 LAVERTON SYDNEY NEWCASTLE 4/38-40 Little Boundary Road 123 Long Street 45 Glenwood Drive Laverton North VIC Smithfield NSW Thornton NSW 03 9768 5850 1300 36 37 34 02 4088 0888 DANDENONG HYDRAULINK HEAD OFFICE BOTANY 1/465 Hammond Road 3/11-23 Perry St Dandenong South VIC Matraville NSW 1300 36 37 34 03 9768 5800 HYDRAULINK DISTRIBUTORS AUSTRALIAN BRANCHES

SECTION 1 TECHNICAL INFORMATION 8 PRODUCT CATALOGUE 2019

1-1 PRODUCT SELECTION GENERAL INFORMATION An essential step in ensuring that a hydraulic system is safe and delivers optimum performance and service life is selecting the correct fluid conveying components. Although a lot of the work undertaken in this industry is the replacement of existing components with a duplicate it is still good practice to check the product against the application especially if the service life of the product to be replaced was not acceptable or when fault finding on an existing system. In some cases a problem with a hose assembly or other fluid conveying products can point to an underlying problem with the system itself or possibly the products have been incorrectly specified originally. IANsFiOmRpMleAmTeIOthNod- HtoOaSsEsist in remembering the key selection criteria is the anagram: HF.OA.SCE.TS.OE.LRE.CS.TION & SERVICE LIFE RECOMMENDATIONS HFy=drFaluuliidc hose (and hose assemblies) have a finite life span that is dependent upon the actual operating cAo=ndAitpiopnliscathteioanssembly is subjected to. An effective way to remember hose selection criteria is to remember tChe=wCoordnnSeTcAtMionPsED. STAMPED is an acronym for the following: STAMRTSO ========TTSSAROMeeiipazzpmmepteeeedplpr(iiaseceut)rarmianoattigftuoouFrnPrerloerMewsesduiraes PEDFT�ho-===emFPEDmLpnreUaaedlttsIiisevDbsreiuilarirtylyes in the products selected must be compatible with the fluid that is to be conveyed. considerations will vary between products depending on the fluid in question. T1Wh.heSeicnzoecrrh-eecHct kohisonesgeInpIt.reDor.dnmualcuDtsfitalubmiedestceeorlemccaptenadtbifbeoirdlitetyhteethrfmeloiwnfoelrdleoquwusiniinreggdst.hhTeoouoNldosmmboaelgltraaankpehI.niDci.nCftohoraaartcgfcoivoueunnndtv;ionluthmise section. in will result pHroesesu; rwehderroept,hheeaatpgpelinceartaiotinonr,efqluuiidretsurtbhueleunsceeoafncdhpeomsisciablse oinrtesrpneacl itaulboeildsaitmisagaed.vIfisianbdleoutbot,esnesluercet theatntehxet sciozveeurpis. also resistant. For gaseous applications it is possible that permeation could occur. �ermeation, sometimes referred to as effusion, is the migration of fluid through the pores of the tube polymer resulting 2in. gTreamdupaelrfalutuidrelo. sHso. sWe hseerleecptieornmiseadteiotenrmocinceudrsbyit tiws oimvpaoriratbalnetstoof etenmsupreerathtuartea; sthwe ealml absietnhte(ehxotesrentaul)be the treeminpfoerrcaetumreenatnadntdhecfoluviedr/maraetecroiaml (pinatteirbnlea.l)Wtehmepnecraotnuvree.yTinhge ghoasseeosuhsoulilqdunidost biteisexapdovsiseadbtloe itnoteprinna-lporircekxternal ttehme pceorvaetur rteospwrehvicehnet xflcueidedbuthiled-muapnuunfadcetur rtehre’scsotavteerdcmauasxiinmgubmlisatnedrinmgin. i�mounmtinlimuaitlsb. uBilodt-hucpoonftinfluuaidl ainndthis witbnolhtixeseirtcnmerfsiiutnptmegencectisfoty,euifnmildrgepheeoovrraesetenuvstrueetanhslalmeytxuacpsraeltoubrssoeieouanttehcsdec. oncmeoamvreotrodtao(otesrdptelwirtmirtehinsinauttlethineognre)icnhoopmtocmtoeemnntpdiaoelndhealnimztsaitrssdu.scEshxutarcashecanasrgeitnhmeeumrseatlnebiaefostleadksoe.fn 3C.oAuppplinligcsat&ioont.heTrheprdoedtuercmtsi;naAtsiown eolfl heonwsutrhineghtyhderabuolidcyhomsaeteorriahloissecaosmsepmatbiblylewailnl byeseuaselsdi.nQhuoessetions Gctcchooooanmnvtsnempterranuacmtcytiobtenirolneesnte.,?doprWotoIsnhidbtaiuteostnaytarnpylseawsodteafarneepdqdtaoutrriodpssm,eqnteousnuibtcreikesscrietaoltureirssaefeiscedetdoh?conoQ?sueuWpeslishentalgieotcsnat,sirobetnahthlacl etoVmuaelnldavdyeinscnc,oellnueivnddeeetc:sotWwiboihenvaesat?lnsissAewrttehceertaehsrdeueritetaoaalbsepolnepslhuicoraesbecleorrect hose selection could include; What are the environmental conditions the hose will be used in? Does the hose require a special cover or armour? Are there unusual mechanical loads or excessive movement? What are the routing requirements? What are the required lengths and bend radius to satisfy those routing requirements? (Further data regarding Hose Installation Recommendation can be found in this section.) Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice PRODUCT CATALOGUE 2020 9

Remember to look at the application or function, this will help to visualise the possible loadings on the product. For example, the crowd cylinder circuit on an excavator is more likely to be subjected to spike pressure than the slew circuit. Always ensure that the product is working within a 4:1 safety factor. That is; the maximum pressure the product will be exposed to is less than 25% of the products minimum burst pressure. Where pressure spikes or impulsing can occur it is good practice, where this is possible, to specify a product that will be working at 75% of its pressure rating for normal system pressure, this will give a safety buffer to absorb spikes. PRODUCT SELECTION ANnoGytepE;roNdEucRt fAittLedINbeFtwOeeRnMtheApTuImOpNand valve will always be exposed to the highest pressures of the 4sy. sMteemd.ium (or media, material) to be conveyed. Hose selection must ensure compatibility of the hose tube (lineArn) aensdseonuttiearl csotevperinwiethnstuherinogil,tchhaet ma ihcyadl orar uglaics stoysbteemcoinsvseayfeeda. nAdcdheemliviecrasl roepstisimtaunmceptaebrfloertmoarunbcbeearnd ceRon-dmsRecproAovnuTicnnEeedScslitfOiceoaFninssFbs(LheeOolfesoWceuttniandilgsintahntehdicsaodsrearecptctioot rnfsl.u),Sideimscpioleancrvicaealylyrientghtoocseoenmsthuparoetncceoonnmttsap.iantiob-ilriitnygssh.ould be taken when specifying TheArlethaoruegthwao laorteoafstthoelowookrkatuwnditehrtraekgeanrdisn ttohisfluinidduflostwry. is the replacement of existing components with a tpd5TpVsimtreoh.raeosliPuodIersusdnitgnf.surmiuinenusSsdtpchegsoreylptetie;smcshrpuilultateypireoemrptiirmnisaeeonocigmt.dtbsaisptTe.usbeporihseMesscuruoesstttnosibsnttnptctaouoililomreolyrlepelmbn.fogusrsefossomliwupubdkorierilbeiddkeetaprhuemtatpilrsnahttsrhhicaaawtaoeeetncpnihdttwrmshiyescyiwsdshlaeslusroaxtabrutheisuguomeromleelndiscfucssloehoimatmasteswlayrsaecuefssiolcnlksotsfrcetgebewotmebfhmertepeehtrpsghbteracphooialnvyoborutsceonlusogieensdslirhdbipoudttoloortcrnyeethtohwrrbsteeetahesehdtpegreuuexcarrafrnpleocoinnunsrdendfio,sdafeuvldtaauodcecnutclwtythotdccheifennotfiedasnrvmaora.desehpmmMtyiganapiinoivntagltvetiedhgxceedoaeiannbmpnthtdepeirtuooeoaideimsmsndndntweeuoefeipoi.wnctsxhruWtcpoissismdonerithkedcricptnreisaehniagntnoegcrolulustsypsfplcteyytoprctiaslefiesyivutnstecpelthistndtmeiuetitsdnecorw.essegiafoaetriaiesgrnnrtkvd,ogiaitncohangedinysdlife 6ca. nEornbigdeisnh.aigTllhyh.edtehpreeanddipnogrtoionntshoefbthoerehtooseanansuselumsbrlaytimouosfttohfeccoyulrinsed,ebr.e compatible with what it is connecting to. eDVVxeoifcllfAoueecmreseidtinemytt;ihpstheleurdesmaeudsaeiglttlhyynpoemeddsetwaohosaaurvkseriesnddigsiftifpneinrreGesrnaestlmulworeenom.srkCb(iinmehgrepincpekgrreittashhlse)euotrkeerecsLyh,itnasrileecwslaeal(cymssteieoicntntrsiiocucn)rreiptoetefhrrtiaahmtisitsihncteuahttteeah.lraoengaaudgeerdfaomernp:dresssseulerectreadtinmges.etAolsr o tapThrhreeoiFsdoc.Auhfisec.tChtmthe.sTiecit.zyaOseplp..ecReFome.lmSudai.pdtocafshtiptebhdeieliettydfoluotisihfdetahthhekoreoesynued.gfahfcittttohinregipnsrmdoedutusetcrbmt eainncidhnegiscpkdreierdesscaustlrypeerderlrtaohtpeesdhaotonsedt.hheEenfalsutuibdreuvitlodhlauutmptheienaesnnyddststehcmehso.sen 7V.elDFoec=iltiFyveluisriyds.tWatheednaas;pfreoedtupcet rissaecctounadlly(inmepedeeridal)isoirmmpoertrtaenst.peAr dseecciosniodn(omf ewtrhicat) product is used can need to bSe-AaSlt=IeZrAeEdppblyicwathioant is available when needed. Always specify up, not down to meet a timeline. A simple change oTfhaeCdsa=ipzCetoo(rfnlmonwaeycatbrioeenaa)sllotfhtahteispnroededuecdt itsokmeyeeptaartreinqueinresmureinngt. the system functions efficiently. TheTf=loTwemarpeearoaftutrhee product and the volume of fluid determines the velocity of the fluid in the system. If EswtsAhaixizelNfpleSROesoof.tlyis=um=g=uimndSoRrOiefagiaivzpcrroteegeaaeflirpnon(hastcholt)oyistnonisyregfettihFodshPelrueortcheorweeeosocasstohsehuimieregaesmhsestsxetemphnmeedecnbetthldeiioendlsdismstooeoitmrfsvodiepaceseectreaplairsfotmeiesn.sisgnIifbeicnilnxoegcn.defdolsuiutsiidboivtnv,eseopwlvoreehcrsi-ictssyhpufeeroecxricdfayerneohydpogsroeeivrcaeohsnmesavemtomeglubnemldnieeeesdrvatooetirroessnnutsascutaeprendroaolidmscucmictustur.ch F - FLUID The materials in the products selected must be compatible with the fluid that is to be conveyed. No�teosm; patibility considerations will vary between products depending on the fluid in question. mThaeWxipmhoeutnemncthliiamelcistksei.nrvgicperolidfeucotf fpluroidduccotmspcaatnibbileitysitghneiffioclalonwtlyinrgedshuoceudldifbtehetaykaerneincotonsatcacnotluynot;perating at SomHoesaer;ewasheorfeththeesaeplepclitcioantiopnrorceeqsusireasrethineteursreelaotfecdhheomwiceavlesrotrhespkeecyiatol ocilosrriteicst apdrovidsuacbtlesetoleecntisounreistthhaet the undceorvsetar nisdainlsgoorfetshisetaanptp.lFicoartigoansaenoduswahpapt liiscaretiqounisreitdisofptohsespibrloedtuhcatt. permeation could occur. �ermeation, sometimes referred to as effusion, is the migration of fluid through the pores of the tube polymer resulting in gradual fluid loss. Where permeation occurs it is important to ensure that as well as the hose tube the reinforcement and cover are compatible. When conveying gaseous liquids it is advisable to pin-prick the cover to prevent fluid build-up under the cover causing blistering. �ontinual build-up of fluid in this Obulirsptreordinucgt rcaongueldisecvoennsttaunatllylyevcoalvuinsgeatnhdeHcydorvaeulrintkoresspelrivtertehseurlitgihntgtoinchpaongtee ntetciahlnihcaalzsapredcsificsautciohnsawsitthhoeutrneoleticaese of toxic fumes, fire or even explosions. Couplings & other products; As well ensuring the body material is compatible any seals in hose connectors, positional adaptors, quick release couplings, ball Valves, live swivels etc are also compatible. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice 10 PRODUCT CATALOGUE 2020

1 THREAD IDENTIFICATION B.S.P.T. - BRITISH STANDARD PIPE TAPER Thread Male Thread Female Thread Size O.D. I.D. & TPI BSPT* BSPT 1/8-28 9.7 8.5 1/4-19 13.1 11.4 3/8-19 16.6 14.9 1/2-14 20.9 18.6 5/8-14 22.9 20.6 3/4-14 26.4 24.1 1-11 33.2 30.2 1.1/4-11 41.9 38.9 1.1/2-11 47.8 44.8 2-11 59.6 56.6 *Basic gauge plane diameter at basic gauge depth 01� ������ �������������� ������������ � 1/07/10 6:34 PM PRODUCT CATALOGUE 2020 11

THREAD IDENTIFICATION 1 B.S.P.P. - BRITISH STANDARD PIPE PARALLEL Thread Male Thread Female Thread Torque Size O.D. I.D. Settings & TPI BSPP BSPP nuts 1/8-28 9.7 BSPP 12 Nm 1/4-19 13.1 8.5 3/8-19 16.6 11.4 26 Nm 1/2-14 20.9 14.9 47 Nm 5/8-14 22.9 18.6 79 Nm 3/4-14 26.4 20.6 104 Nm 1-11 33.2 24.1 128 Nm 1.1/4-11 41.9 30.2 160 Nm 1.1/2-11 47.8 38.9 200 Nm 2-11 59.6 44.8 270 Nm 56.6 350 Nm 01a thread identification RESIZED.indd 3 1/07/10 6:34 PM 12 PRODUCT CATALOGUE 2020

1 THREAD IDENTIFICATION N.P.T. - NATIONAL PIPE THREAD Thread Size Male Thread O.D. Female Thread I.D. & TPI NPTF NPTF NPSF/SM 1/8-27 10.0 8.6 8.7 1/4-18 13.3 11.2 11.4 3/8-18 16.7 14.7 14.9 1/2-14 20.8 18.2 18.8 3/4-14 26.1 23.5 23.9 1-11.1/2 32.7 29.5 30.2 1.1/4-11.1/2 41.4 38.3 39.1 1.1/2-11.1/2 47.5 44.4 45 2-11.1/2 59.3 56.2 57 01a thread identification RESIZED.indd 4 1/07/10 6:34 PM PRODUCT CATALOGUE 2020 13

THREAD IDENTIFICATION 1 J.I.C / U.N. O-RING THREAD Thread Female Torque Size Thread Tube O.D. Settings & TPI JIC UN\"O\" I.D. 7/16 x 20 UNF 9.8 1/4\" 14 Nm 21 Nm 1/2 x 20 UNF 11.5 5/16\" 19 Nm 25 Nm 9/16 x 18 UNF 13.0 3/8\" 30 Nm 34 Nm 3/4 x 16 UNF 17.4 1/2\" 50 Nm 72 Nm 7/8 x 14 UNF 20.3 5/8\" 80 Nm 100 Nm 1 1/16 x 12 UN 24.8 3/4\" 130 Nm 176 Nm 1 3/16 x 12 UN 28.2 7/8\" 140 Nm 220 Nm 1 5/16 x 12 UN 31.2 1\" 156 Nm 290 Nm 1 5/8 x 12 UN 39.2 1.1/4\" 188 Nm 350 Nm 1 7/8 x 12 UN 45.5 1.1/2\" 268 Nm 460 Nm 2 1/2 x 12 UN 61.5 2\" 346 Nm 540 Nm 01� ������ �������������� ������������ � 1/07/10 6:34 PM 14 PRODUCT CATALOGUE 2020

1 THREAD IDENTIFICATION S.A.E. - SOCIETY OF AUTOMOTIVE O.R.F.S. - O-RING FACE SEAL ENGINEERS Thread Tube O.D. Female Thread Female Tube \"O\"-ring Torque Size Thread Size Thread O.D. size Settings * & TPI 1/4\" & TPI 5/16\" I.D. I.D. 1/4\" 5/16x1/16 14-16 Nm 7/16-20 3/8\" 9.8 9/16-18 UNF 7/16\" 11.4 11/16-16 UN 12.8 1/2-20 1/ 2\" 14.3 13/16-16 UN 5/8\" 16.0 3/8\" 3/8x1/16 24-27 Nm 5/8-18 3/4\" 16 1-14 UN 7/8\" 19.1 1/2\" 1/2x1/16 43-47 Nm 11/16-16 17.5 1.3/16-12UN 1\" 23.5 5/8\" 5/8x1/16 60-69 Nm 3/4-16 20.5 1.7/16-12 UN 74//88--1144 26.1 3/4\" 3/4x1/16 90-95 Nm 24.8 1.11/16-12 UN 1.1/16-14 34.2 1\" 15/16x1/16 125-135 Nm 30.1 2-12 UN 1.1/4-12 40.6 1.1/4\" 1.3/16x1/16 170-190 Nm 33.2 1.3/8-12 48.0 1.1/2\" 1.1/2x1/16 200-225 Nm 01a thread identification RESIZED.indd 6 1/07/10 6:34 PM PRODUCT CATALOGUE 2020 15

THREAD IDENTIFICATION 1 S.A.E. O-RING FLANGES (SAE - J518) Nominal A (mm) B (mm) C (mm) D (mm) Flange Code Code Code Code Code Code Code Code Size 1/2 61 62 61 62 61 62 61 62 *5/8 17.48 18.24 38.1 40.49 30.18 31.75 6.75 7.75 3/4 19.8 - 42.90 – 34.0 – 6.73 – 1 22.23 23.80 47.63 50.80 38.10 41.28 6.73 8.76 1.1/4 26.19 27.76 52.37 57.15 44.45 47.63 8.0 9.53 1.1/2 30.18 31.75 58.72 66.68 50.80 53.98 8.0 10.29 2 35.71 36.50 69.85 79.38 60.33 63.50 8.0 12.57 42.88 44.45 77.77 96.82 71.42 79.38 9.53 12.57 Nominal Pressure Rating \"O\"-ring size UNC Bolt size Bolt torque Flange Code Code Code AS568A Code Code Code Code Size 1/2 61 62 61 and 62 number 61 62 61 62 3/4 5000 psi 6000 psi 3/4x1/8 210 5/16x1.1/4 5/16x1.1/4 20-25 Nm 20-25 Nm 1 5000 psi 6000 psi 1x1/8 214 3/8x1.1/4 3/8x1.1/2 28-40 Nm 34-45 Nm 1.1/4 5000 psi 6000 psi 1.5/16x1/8 219 3/8x1.1/4 7/16x1.3/4 37-48 Nm 56-68 Nm 1.1/2 4000 psi 6000 psi 1.1/2x1/8 222 7/16x1.1/2 1/2x1.3/4 48-62 Nm 85-102 Nm 2 3000 psi 6000 psi 1.7/8x1/8 225 1/2x1.1/2 5/8x2.1/4 62-79 Nm 158-181 Nm 3000 psi 6000 psi 2.1/4x1/8 228 1/2x1.1/2 3/4x2.3/4 73-90 Nm 271-294 Nm *The 5/8* size flange is not part of the SAE`standard. It is included in the J.I.S. standards and is used by Komatsu and other O.E.M’s. 01a thread identification RESIZED.indd 7 1/07/10 6:34 PM 16 PRODUCT CATALOGUE 2020

1 THREAD IDENTIFICATION J.I.S. - JAPANESE INDUSTRIAL STANDARDS THREAD SPECIFICATIONS Metric Threads Komatsu Threads (J.I.S) (Metric) 14-1.5* 12.5 14-1.5* 12.5 18-1.5* 16.5 18-1.5* 16.5 22-1.5* 20.5 22-1.5* 20.5 27-2.0 25 24-1.5 22.5 33-2.0 31 30-1.5 28.5 42-2.0 40 33-1.5 31.5 50-2.0 48 36-1.5 34.5 60-2.0 58 42-1.5 40.5 * denotes interchange sizes between JIS and Komatsu. 01� ������ �������������� ������������ � 1/07/10 6:34 PM PRODUCT CATALOGUE 2020 17

THREAD IDENTIFICATION 1 D.I.N. METRICS 24° CONE SYSTEM THREAD SPECIFICATIONS LIGHT (L) SERIES THREAD SPECIFICATIONS HEAVY (S) SERIES Thread O.D. Female Diameter Tube Thread O.D. Female Diameter Tube & Pitch Thread I.D. D1 (mm) O.D.(mm) & Pitch Thread I.D. D1 (mm) O.D.(mm) M12-1.5 10.5 7.2 6 M14-1.5 12.5 7.2 6 M14-1.5 12.5 9.2 8 M16-1.5 14.5 9.2 8 M16-1.5 14.5 11.6 10 M18-1.5 16.5 11.6 10 M18-1.5 16.5 13.8 12 M20-1.5 18.5 13.8 12 M22-1.5 20.5 16.8 15 M22-1.5 20.5 15.8 14 M26-1.5 24.5 19.8 18 M24-1.5 22.5 17.8 16 M30-2.0 28 23.8 22 M30-2.0 28 22 20 M36-2.0 34 29.8 28 M36-2.0 34 27 25 M45-2.0 43 37.2 35 M42-2.0 40 32 30 M52-2.0 50 44.2 42 M52-2.0 50 40 38 01� ������ �������������� ������������ � 1/07/10 6:34 PM 18 PRODUCT CATALOGUE 2020

1 THREAD IDENTIFICATION D.I.N. METRICS 60° CONE SYSTEM THREAD SPECIFICATIONS Thread O.D. Female Tube & Pitch Thread I.D. O.D.(mm) M10-1.0 9.0 5 M12-1.5 10.5 6 M14-1.5 12.5 8 M16-1.5 14.5 10 M18-1.5 16.5 12 M22-1.5 20.5 15 M26-1.5 24.5 18 M30-1.5 28.5 22 M38-1.5 36.5 28 M45-1.5 43.5 35 M52-2.0 56.5 42 01a thread identification RESIZED.indd 10 1/07/10 6:34 PM PRODUCT CATALOGUE 2020 19

THREAD IDENTIFICATION 1 I.S.O. METRICS (INTERNATIONAL STANDARDS ORGANISATION) THREAD SPECIFICATIONS Thread O.D. Female Tube & Pitch Thread I.D. O.D.(mm) M12-1.0 11.0 6 M14-1.5* 12.5 8 M16-1.5* 14.5 10 M18-1.5* 16.5 12 M20-1.5 18.5 14 M22-1.5* 20.5 15 M24-1.5** 22.5 16 M27-1.5 25.5 18 M30-1.5 28.5 22 M33-1.5 31.5 25 M36-1.5 34.5 28 M39-1.5 37.5 30 M42-1.5 40.5 32 M45-1.5 43.5 35 M48-1.5 46.5 38 M52-1.5 50.5 40 * Interchange with D.I.N. Light ** Interchange with D.I.N. Heavy 01a thread identification RESIZED.indd 11 1/07/10 6:34 PM 20 PRODUCT CATALOGUE 2020

1 THREAD IDENTIFICATION FRENCH METRICS (GAZ & MILLIMETRIQUE SERIES) THREAD SPECIFICATIONS LIGHT (L) SERIES Thread O.D. Female Diameter & Pitch Thread I.D. GAZ Millimetrique M12-1.0 11.0 - 6 M14-1.5 12.5 - 8 M16-1.5 14.5 - 10 M18-1.5 16.5 - 12 M20-1.5 18.5 13.25 14 M22-1.5 20.5 - 15 M24-1.5 22.5 16.75 16 M27-1.5 25.5 - 18 M30-1.5 28.5 21.25 22 M33-1.5 31.5 - 25 M36-1.5 34.5 26.75 28 M39-1.5 37.5 - 30 M42-1.5 40.5 - 32 M45-1.5 43.5 33.5 35 M48-1.5 46.5 - 38 M52-1.5 50.5 42.25 40 M54-2.0 52.0 - 45 M58-2.0 56.0 48.25 - 01� ������ �������������� ������������ 1� 1/07/10 6:34 PM PRODUCT CATALOGUE 2020 21

THREAD IDENTIFICATION 1 STAPLE-LOK COUPLINGS THREAD SPECIFICATIONS Coupling Imperial Male O.D. Female I.D. Dash Size Size 1/4 inch mm inch mm -4 3/8 -6 1/2 0.58 14.8 .59 15.0 -8 3/4 -12 1 0.78 19.8 .79 20.0 -16 1.1/4 -20 1.1/2 0.94 23.9 .95 24.1 -24 2 -32 1.13 28.8 1.14 29.0 1.53 38.9 1.54 39.1 1.80 45.7 1.81 46.0 2.16 54.9 2.17 55.1 2.52 64.0 2.53 64.3 01a thread identification RESIZED.indd 13 1/07/10 6:34 PM 22 PRODUCT CATALOGUE 2020

1 HOSE ASSEMBLY MEASUREMENT STRAIGHT HOSE ASSEMBLY LENGTH BENT HOSE ASSEMBLY LENGTH +RVH,' 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1.1/4 1.1/2 2 .PP 110 130 130 160 180 210 210 260 260 260 310 135.0° 01a thread identification RESIZED.indd 14 1/07/10 6:34 PM PRODUCT CATALOGUE 2020 23

HOSE INSTALLATION RECOMMENDATIONS 1 01� ������ �������������� ������������ 1� 1/07/10 6:34 PM 24 PRODUCT CATALOGUE 2020

1 HOSE INSTALLATION RECOMMENDATIONS 01a thread identification RESIZED.indd 16 1/07/10 6:34 PM PRODUCT CATALOGUE 2020 25

HOSE INSTALLATION RECOMMENDATIONS 1 01a thread identification RESIZED.indd 17 1/07/10 6:34 PM 26 PRODUCT CATALOGUE 2020

HYDRAULINK BRANDED HOSES SECTION 2 PRODUCT CATALOGUE 2019 9

2-1 HYDRAULINK BRANDED HOSE GENERAL INFORMATION Hydraulink has established itself as a proven hydraulic hose & fitting specialist for over 70 years. With the selection of braided and multi spiral hoses on offer, the Hydraulink range of hoses will satisfy all of your needs. The Super Tuff “ST” range of braided hoses come standard with flame and abrasion resistant features – ideal for use in harsh and adverse environments. For general pressure-wash applications up to 400 bar, the Hydraulink range of Jet Wash hoses are designed to be easier to handle and use due to their light, flexible and compact design. All Hydraulink branded hoses are easily identifiable for fast fix and replacement, and are readily available across our nationwide network of service centres and mobile service vans. H1HS1NS-0N1-01 Brand Name Part Number Range Construction Constant MSHA HARC Compact H1T 1 Wire Pressure (Flame Resist) Abrasion H2T 2 Wire   HX4K Multi Spiral 4100psi  HX5K Multi Spiral 5100psi  HX6K Multi Spiral 6100psi  HX4K-ST Multi Spiral 4100psi   HX6K-ST Multi Spiral 6100psi   H17 1 & 2 Wire 3000psi    H19 2 Wire 4100psi   H16 2 Wire  HJW250 1 Wire 250bar HJW400 2 Wire 400bar OOuurrpprorodduucct trarannggeeisisccoonnsstatanntltylyeevvoolvlvininggaannddHHyyddrarauulinlinkkreresseervrveeththeerirgighht ttotocchhaannggeetetecchhnnicicaal lssppeeccififcicaatitoionnsswwitihthoouut tnnootitcicee 28 PRODUCT CATALOGUE 2020

2-2 INFORMATION - HOSE HOSE SELECTION & SERVICE LIFE RECOMMENDATIONS Extracts from SAE J1273 SEP2014: Recommended Practices for Hydraulic Hose Assemblies  6FRSH—SAE J1273 provides guidelines for selection, routing, fabrication, installation, replace- ment, maintenance, and storage of hose and hose assemblies for ��uid-power systems. Many of�these SAE Recommended Practices also may be suitable for other hoses and systems.  +RVH6HOHFWLRQDQG5RXWLQJ—A wide variety of interacting factors in��uence hose service life�and the ability of each ��uid-power system to operate satisfactorily, and the combined effects of these factors on service life are often unpredictable. Therefore, these documents should not be construed as design standards. For applications outside the speci��cations in SAE J517, SAE J514, or other relevant design standards, performance of hose assemblies should be determined by appropriate testing. Carefully analyze each system. Then design routings and select hose and related compo- nents to meet the system-performance and hose-service-life requirements, and to minimize the risks of personal injury and/or property damage. Consider the following factors: 5.1 System Pressures—Excessive pressure can accelerate hose assembly failure. Analyze the steady-state pressures, and the frequency and amplitude of pressure surges, such as pulses and spikes. These are rapid and transient rises in pressure which may not be indicated on many common pressure gauges and can be identi��ed best on high-frequency-response electronic measuring instru- ments. For maximum hose service life, hose selection should be based on a system pressure, including surges, that is less than the hose maximum working pressure. Hose may be used above its maxi- mum working pressure where reduced life expectancy is acceptable. SAE J1927 provides one method to help predict wire-reinforced hose service life for a given hydraulic application, where the surge pressure peaks vary, and/or the highest pressure peaks occur infrequently. 5.2 Suction—For suction applications, such as inlet ��ow to pumps, select hose to withstand both the negative and positive pressures the system imposes on the hose. 5.3 External Pressure—In certain applications, such as in autoclaves or under water, the external environmental pressures may exceed the���uid pressure inside the hose. In these applications, con- sider the external pressures, and if necessary, consult the manufacturers. 5.4 Temperature—Exceeding hose temperature ratings may signi��cantly reduce hose life. Select hose so the ��uid and ambient temperatures, both static and transient, fall within the hose ratings. The effects of external heat sources should not raise the temperature of the hose above its maximum op-erating temperature. Select hose, heat shields, sleeving, and other methods for these requirements, ������������������������������������������������������������������������� 0 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice PRODUCT CATALOGUE 2020 29

2-3 INFORMATION - HOSE Ow HOSE SELECTION & SERVICE LIFE RECOMMENDATIONS (cont’d) 5.5 Permeation—Permeation, or effusion, is seepage of uid through the hose. Certain materials in hose construction are more permeable than others. Consider the effects of permeation when select-ing hose, especially with gaseousuids. Consult the hose and fluid manufacturers for permeability information. 5.6 Hose-Material Compatibility—Variables that can affect compatibility of system fluids with hose materials include, but are not limited to: a. Fluid pressure b. Temperature c. Concentration d. Duration of exposure Because of permeation (see 5.5), consider compatibility of system uids with the hose, tube, cover, reinforcement, and ttings. Consult the uid and hose manufacturers for compatibility information. NOTE— Many uid/elastomer compatibility tables in manufacturers’ catalogs show ratings based on uids at 21 °C, room temperature. These ratings may change at other temperatures. Carefully read the notes on the compatibility tables, and if in doubt, consult the manufacturer. 5.7 Environment—Environmental conditions can cause hose and tting degradation. Conditions to evaluate include, but are not limited to: a. Ultraviolet light b. Salt water c. Air pollutants d. Temperature (see 5.4) e. Ozone f. Chemicals g. Electricity h. Abrasion If necessary, consult the manufacturers for more information. 5.8 Static-Electric Discharge—Fluid passing through hose can generate static electricity resulting in static-electric discharge. This may create sparks that can puncture hose. If this potential exists, select hose with sufcient conductivity to carry the static-electric charge to ground. 5.9 Sizing—The power transmitted by pressurized uid varies with pressure and rate of ow. Select hose with adequate size to minimize pressure loss, and to avoid hose damage from heat generation or excessive velocity. Conduct calculations, or consult the manufacturers for sizing at ow velocities. 5.10 Unintended Uses—Hose assemblies are designed for the internal forces of conducted uids. Do not pull hose or use it for purposes that may apply external forces for which the hose or ttings were not designed. 5.11 Specications and Standards—When selecting hose and ttings for specic applications, refer to applicable government, industry, and manufacturer’s specications and standards. Owwuwr.hypdrraoudlinuk.ccotmrange is constantly evolving and Hydraulink reserve the right to change technicCaoplysrigphte©cHifYicDRaAtiUoLnINsK FwLUitIhDoCuONt NnEoCtTiOcReS 2010 30 PRODUCT CATALOGUE 2020

2-4 0022-4 INFORMATIINOFNO-RHMOASTEION - HOSE HOSE SELECHTOIOSEN S&ESLEERCVTIICOENL&IFSEERREVCICOEMLMIFEENRDEACTOIOMNMSE(cNoDnAt’TdI)ONS (cont’d) 5.12 Unusual App5l.i1c2atUionnuss—uaAlpApplicpalitcioantsionnost—adAdprpelsicsaetdiobnys tnhoet madadnruefsascetudrbeyr othrebymianndufsatcrytusrtearno-r by industry stan- dards may requiredsapredcsiaml ateysrteinqguipreriosrpteocsiaelletecstitningghporsioer. to selecting hose. 5.13 Hose Cleanli5n.1e3ssH—oTseheCcleleaannlliinness—reTqhueirecmleeantlsinoefssyrsetqeumirecmomenptosnoefnstsy,sotethmercothmapnohnoesnets, ,woiltlher than hose, will determine the cleadnelitneermssinreqthueirecmleeantlsinoefssthreeqaupiprelicmaetinotns. oCfothnesualtptphleicactoiomnp.oCnoennstumltathneufcaocmtupreornse’ nt manufacturers’ cleanliness informcalteioannlfionreassll cinofmorpmoanteionntsfoinr athllecsoymspteomne. nHtossine tahsesesmysbteliems. vHaorsyeinacslseeamnlbinliessvlaervyeilns;cleanliness levels; therefore, specify hthoesreefaosrese, mspbeliceifsywhiothseadaesqseumatbelicelseawniltihneasdseqfourattheecsleyasntelimne. ss for the system. 5.14 Hose Fitting5s.—14SHeloescteioFnitotifnthges—prSopeelerchtiosneoftthinegpsrfooprethr ehohsoesetatingdsafpoprlitchaetihoonsies aenssdeanptipallicfoartion is essential for proper operation apnrdopsearfeopueseraotifohnoasnedasnadfereulaseteodfahsosseemabnlyd ereqluaitpemdeansts.eHmobsley etqtiunigpsmaernet.qHuaolsieedttings are qualied with the hose. Thewreitfhorteh,esheolescet.oTnhlyerheofosree,tsteinlegcstcoonmlyphaotisbelewttitnhgtshceohmopsaetifbolrethweithapthpelichaotisoensfo. r the applications. Improper selectionImofphroopseerstetilnegcstioonr roeflahtoesdeaststienmgsbolyr ereqluaitpemdeanstsfeomr tbhlye eaqpupilpicmateionnt fcoarnthreesauplpt liincation can result in injury or damage firnojmuryleoarkds,aomrafgroemfrohmoseleakss,eomrbflrioems bhlowseinagsaspeamrbt l(iseeseb4lo.2w,in6g.2a, p6a.3rt, (asnede64..42),. 6.2, 6.3, and 6.4). 5.15 Vibration—V5ib.1ra5tiVoinbcraatniorne—duVceibrhaotsioenscearnvicredluifece. Ihf oresqeusireerdv,icceonlifdeu.cIft rtesqtusirteode, vcaolnudautectthteesftrset-o evaluate the fre- quency and amplitquudeenocfysaynsdteammvpiblitruadtieono.fCsylasmtepms voirborathtieornm. Celaanmspms aoyr obteheursemdetaonrsemduacyebteheuseeffdectotsreduce the effects of vibration. Consiodfevr itbhreatvioibnr.aCtionsriedqeurirtheemveinbtrsatwiohnenresqeulierecmtinegnhtsowseheandseplreecdtinctginhgoservaincde plifre.dicting service life. 5.16 Hose Cover 5P.r1o6teHcotisoenC—oPvreortePcrtottheechtioosne—cPovroetrefcrtotmheahborasseiocno,veerrofsroiomn,asbnraagsgioing, ,earonsdiocnu,ttsinga.gging, and cutting. Special abrasion-rSespiesctaianltahborsaessioann-rdeshiosstaengt uhaorsdessaarnedahvoasilaebgleuafordrsadadreitiaovnaailapbroletefoctrioand.dRitioountael hporosteection. Route hose to reduce abrasiontofrroemduhcoesaebrruabsbioinngfrootmhehr ohsoeseruobrboinbgjeocthsethr ahtomseayoraobbrajedcetsitt.hat may abrade it. 5.17 External Phy5s.1ic7aEl Axtbeursnea—l PRhoyustiecahloAsebutosea—voRido:ute hose to avoid: a. Tensile loads a. Tensile loads b. Side loads b. Side loads c. Flattening c. Flattening d. Thread damaged. Thread damage e. Kinking e. Kinking f. Damage to sealifn.gDsaumrfaagceesto sealing surfaces g. Abrasion g. Abrasion h. Twisting h. Twisting 5.18 Swivel-Type5A.1d8apStwerivse—l-STwypiveeAl-tdyappetetrtsin—gsSowrivaedla-tpytpeerstdtiongnsototrraandsafpetretrosrqduoentoot htroasnesfwerhitloerqbuee- to hose while be- ing tightened. Useinthgetsigehatesnneede.dUesdetothperseevaesntnteweisdteindgtoduprrienvgeintstawlilsatinogn.during installation. 5.19 Live Swivels5—.1I9f tLwiovecoSmwpivoenlesn—tsIfintwthoecsoymspteomneanrtes rinottahteingsyisnteremlaatiroenrtootaetaincghionthreelra,tliiovne tsoweiva-ch other, live swiv- els may be necessealsrym. Tahyebse nceocnensescatoryr.sTrehdeusececothnenetocrtqourse rteradnuscme ithteedtotorqtuhe throasnes.mitted to the hose. 5.20 Slings and C5l.a2m0pSsli—ngUsseansdlinCglsaamnpdsc—laUmspesstloinsguspapnodrtchlaemavpysotrolosunpgphoorst eheaanvdytorkleoenpg ihtoasweaaynd to keep it away from moving partsf.rUomsemcolavminpgsptahratts.pUresveenctlahmopses tmhaotvepmreevnetnthhaotsweilml coavuesmeeanbtrtahsaiot nw.ill cause abrasion. 5.21 Minimum Be5n.d21RMadiniuims—umThBeemndiniRmaudmiubse—nTdhreadmiuinsimisudmebneenddinraSdAiuEs Jis34d3eanneddisinsSpAecEiJe3d43inand is specied in other SAE standarodtshearnSdAhEossetamndaanrudfascatunrdehr’ossperomdauncut fliatecrtuartuere’s. pRroudtuincgt laitet rleastusreth.aRnomutiinnigmautmlebsesntdhan minimum bend radius may reducerahdoisues lmifea.ySrheadrupcebehnodsienglifaet. tShheahrposbee/ntdting jautntchteurheomsea/ytrteinsguljtuinnclteuarekimnga,yhroesseult in leaking, hose rupturing, or the horuspetuarsinsegm, obrlythbelohwoisnegaaspsaermt (bsleyeb4lo.2w)ing apart (see 4.2) 5.22 Elbows and 5A.d2a2pEtelbros—wsInasnpdeAcidaal cpatesress—, uIsneseplebcoiawlscoarseasd,aupsterseltboorweslieovreahdoaspetesrstratoinr.elieve hose strain. 5.23 Lengths—Un5n.2e3ceLsesnagritlyhslo—ngUnhnoesececsasnarinilycrleoansgehporseesscuarneindcrorepaasnedpareffsescut rseysdtreomp apnedrfoarfmfeactnscyes. tem performance. O0wwuwr.hypdrraoudlinuk.ccotmrange is cOwowunwr.shytpdarrnaoutdllinyuk.cceotvmroalvnigneg iasncdonHsytdarnatulylinekvorlevsinegrvaentdheHryidgrhatutolinckhraensgeervteecthenicrCiagoplhysrtigpthoet ©ccHihfYicaDaRnAtgiUoeLnINtseK cFwLhUitnIhDicoCCaouOplNtysrNnigpEohCettT©icOcHiRefYiScD2aR0At1iU0oLnINsK FwLUitIhDoCuONt NnEoCtTiOcReS 2010 PRODUCT CATALOGUE 2020 31

2-5 INFORMATION - HOSE Ow HOSE SELECTION & SERVICE LIFE RECOMMENDATIONS (cont’d) When pressurized, hose that is too short may pull loose from its ttings, or stress the tting connec- tions, causing premature metallic or seal failures. When establishing hose length, use the following practices: 5.23.1 MOTION ABSORPTION—Provide adequate hose length to distribute movement and prevent bends smaller than the minimum bend radius. 5.23.2 HOSE AND MACHINE TOLERANCES—Design hose to allow for changes in length due to machine motion and tolerances. 5.23.3 HOSE LENGTH CHANGE DUE TO PRESSURE—Design hose to accommodate length changes from changing pressures. Do not cross or clamp together high- and low-pressure hoses. The difference in length changes could wear the hose covers. 5.24 Hose Movement and Bending—Hose allows relative motion between system components. Analyze this motion when designing hose systems. The number of cycles per day may signicantly affect hose life. Also avoid multiple planes of motion and twisting motion. Consider the motion of the hose when selecting hose and predicting service life. In applications that require hose to move or bend, use these practices: 5.24.1 BEND IN ONLY ONE PLANE TO AVOID TWISTING 5.24.2 PREVENT HOSE BENDING IN MORE THAN ONE PLANE—If hose follows a compound bend, couple it into separate segments, or clamp it into segments that ex in only one plane. 7. Hose Installation and Replacement—Use the following practices when installing hose assem- blies in new systems or replacing hose assemblies in existing systems: 7.1 Pre-Installation Inspection—Before installing hose assemblies, examine: a. Hose length and routing for compliance with original design b. Assemblies for correct style, size, length, and visible nonconformities c. Fitting sealing surfaces for burrs, nicks, or other damage NOTE— When replacing hose assemblies in existing systems, verify that the replacement is of equal quality to the original assembly. 7.2 Handling During Installation—Handle hose with care during installation. Kinking hose, or bend- ing at less than minimum bend radius may reduce hose life. Avoid sharp bending at the hose/tting juncture (see 5.21). 7.3 Twist Angle and Orientation—Pressure applied to a twisted hose may shorten the life of the hose or loosen the connections. To avoid twisting, use the hose lay line or marking as a reference. 7.4 Securement and Protection—Install necessary restraints and protective devices. Determine that such devices do not create additional stress or wear points. 7.5 Routing—Review proper routing practices provided in Section 5 and make appropriate correc- tions to obtain optimum performance. Owwuwr.hypdrraoudlinuk.ccotmrange is constantly evolving and Hydraulink reserve the right to change technicCaoplysrigphte©cHifYicDRaAtiUoLnINsK FwLUitIhDoCuONt NnEoCtTiOcReS 2010 32 PRODUCT CATALOGUE 2020

2-6 0022-6 INFORMATIINOFNO-RHMOASTEION - HOSE HOSE SELECHTOIOSEN S&ESLEERCVTIICOENL&IFSEERREVCICOEMLMIFEENRDEACTOIOMNMSE(cNoDnAt’TdI)ONS (cont’d) 7.6 Assembly Tor7q.u6eA—ssTehme bcolynnTeocrqtioune—enTdhoefcaohnonseectiottninegnids onfoarmhaolslyethtrteinagdeisdntorombatallyintharetigahdted to obtain a tight pressure seal whepnreasttsaucrheesdetaol awhpeonrt,aattnacahdeadptteor,aoproarnt,oathneardattpintegr.,Soor maneotitmhersbttoinltgs.oSrosmcreetwimsepsrob-olts or screws pro- vide the threaded vciodnentehcetiothnr.eEadaechd scioznenaencdtiotynp. eEaocf hcosnizneecatniodntyrepqeuoirfecsodninffeecrteionnt troerquierevsadluifefesr,eanntdtorque values, and these may vary dutehetosetympeayofvamraytdeuriealtortyepxeteorifomr caoteartinagl o. r exterior coating. Follow appropriateFtoolrloqwuinagppinrostprruiactieontosrqtouionbgtaininstarupcrtoiopnesr tporeosbstauirneaseparol pweitrhporuetsosvuerer-tsoerqaul winigth. oAut over-torquing. A properly calibratedptrorpqeurelywcraelinbcrahteshdotuolrdqubee wusreendcthostihgohuteldnbeeacuhsecdontoneticgthiotenn, eexaccehpct ownhneenctihoen,meaxncue-pt when the manu- facturer species tfiagchttuerneirngspaecsipeecsitiegdhtneunminbgear osfpheecixedatntumrnbsebreoyfohnedxnagtetrurtingshtbteoyonbdtainngaesretaigl.ht to obtain a seal. 7.7 System Check7o.7uStsy—stIenmhyCdhraeuclkicoourtso—theInr hliqyudirdauslyicstoermosth, erlimliqinuaidtesyasllteamir se,netrlaimpminaetnet alfltearirceonmtr-apment after com- pleting the installaptiolenti.nFgotlhloewinmstaanlluaftaiocntu. rFeorsll’oiwnsmtruacntuiofancstutoretress’tinthsetruscytsiotenms tfoortepsotstshieblseymstaelmfunfocrtiopnossible malfunctions and leaks. and leaks. 7.7.1 TO AVOID IN7J.7U.R1 YTODUAVROINIDG ISNYJSUTREYMDCUHREINCGKOSYUSTTSE: M CHECKOUTS: a. Do not touch anay. pDaortnoofttthoeucshysatenmy pwahrteonfcthecskyinstgemforwlehaeknsc(hsecek4in.1g)f.or leaks (see 4.1). b. Stay out of potebn.tiSaltlayyhoauztaordf opuosteanrteiaalslywhhaizleartdeosutinsgarheoassewshysiletetmesti(nsgeehoSseectsioynste4m). s (see Section 4). c. Relieve system cp.reRsesliuerveebseyfsotreemtigphretesnsiunrgecboenfnoerecttiiognhste. ning connections. 8. Maintenance In8s.pMeacitniotenn—anAcheoIsnesapnedctiottinn—g mA ahionstenaanndcetptirnoggmraaminmteanyanrecdeupcreogerqaumipmeanytrdeodwucne- equipment down- time, maintain peatkimoep,emraatingtapineprfeoarmk aonpceera, tainngd predrfuocrme athneceri,saknodf preedrsuocneatlhienjruisryk aonf dp/eorrspornoapleinrtjyury and/or property damage. The userdsahmoauglde.dTeshiegnusaenrdsihmopulledmdeenstiganmaanidntiemnpalenmceepnrtoagmraaminttheantasnucietsptrhoegsrapmectihcataspu-its the specic ap- plication and eachpslipceactiionc ahnodseeiancthhaspt eacpiplcichaotisoen.in that application. 8.1 Inspection Fre8q.1uIennscpye—ctEiovnalFuaretequfaecntocrys—suEcvhalausattehefancatotursresuacnhd assevtheeritnyaotfutrheeaanpdpsliecvaetiroitny, opfatshte application, past history, and manufhaicstuorey,rsa’nindfomrmanautifoancttuoreersst’ainbfliosrhmtahteiofnretqoueesntcaybloisfhvitshueaflreinqsupeencctiyonosf vainsudafluinncstpioencatilons and functional tests. tests. 8.2 Visual Inspec8ti.o2nV(iHsuoasleInasnpdeFcittitoinng(sH)o—sVeisaunadllyFinttsinpgecst)—hoVsiesuaanlldy inttsinpgesctfohro:se and ttings for: a. Leaks at hose att.inLgeaokrsinaht ohsoese tting or in hose b. Damaged, cut, obr. aDbarmadaegdedc,ocvuetr, or abraded cover c. Exposed reinforc.eEmxepnotsed reinforcement d. Kinked, crushedd,.Kaitntekneedd, ,croursthweisdt,edahttoesneed, or twisted hose e. Hard, stiff, heat ec.raHcakredd, ,sotirff,chaerartecdrahcokseed, or charred hose f. Blistered, soft, dfe.gBralisdteedre, do,r slooofts,edecgorvaedred, or loose cover g. Cracked, damage. dC,roarckbeadd,lydacomrarogdeedd, orttibnagdsly corroded ttings h. Fitting slippage ho.nFhitotisneg slippage on hose i. Other signs of siig.nOithcaenr tsdigentseroiofrsaitgionnicant deterioration If any of these conIdf iatinoynsofetxhisets,eevcaolnudaiteionthseehxoisste, eavsasleumatbelitehsefhoor sceorarescsteiomnbolier srefpolracoermreecntito. n or replacement. 8.3 Visual Inspec8ti.o3nV(iAsullaOl tInhsepr eCcotmiopno(nAellnOtst)h—erWChoemn pvoisnueanllytsi)n—spWechteinngvhisousaellyanindspteticntginsg, ihnosspecatnd ttings, inspect for related items infcolrurdeinlagte: d items including: a. Leaking ports a. Leaking ports b. Damaged or misbs. iDngamhoasgeedcloarmmpsis,sginugarhdoss,eorclsahmiepldss, guards, or shields c. Excessive dirt acn.dEdxecbersisiaveroduinrtdahnodsdeebris around hose d. System uid: levde. lS, tyysptem, counitda:mleinvaetli,otny,pceo, ncdointitoanm, iannadtioanir, ecnotnrdaitniomne,natnd air entrainment If any of these areIfoaunnydo, fatdhderseessartehefomunadp,parodpdrrieasteslyt.hem appropriately. O0wwuwr.hypdrraoudlinuk.ccotmrange is cOwowunwr.shytpdarrnaoutdllinyuk.cceotvmroalvnigneg iasncdonHsytdarnatulylinekvorlevsinegrvaentdheHryidgrhatutolinckhraensgeervteecthenicrCiagoplhysrtigpthoet ©ccHihfYicaDaRnAtgiUoeLnINtseK cFwLhUitnIhDicoCCaouOplNtysrNnigpEohCettT©icOcHiRefYiScD2aR0At1iU0oLnINsK FwLUitIhDoCuONt NnEoCtTiOcReS 2010 PRODUCT CATALOGUE 2020 33

2-7 INFORMATION - HOSE HOSE SELECTION & SERVICE LIFE RECOMMENDATIONS (cont’d) 8.4 Functional Test—Functional tests determine if systems with hose are leak free and operating properly. Carry out functional tests per information from equipment manufacturers. 9. Hose Storage—Age control and the manner of storage can affect hose life. Use the following practices when storing hose. 9.1 Age Control—Maintain a system of age control to determine that hose is used before its shelf life has expired. Shelf life is the period of time when it is reasonable to expect the hose to retain full capabilities for rendering the intended service. Store hose in a manner that facilitates age control and rst-in, rst-out usage based on manufactur- ing date on hose or hose assembly. Per SAE J517: a. Shelf life of rubber hose in bulk form, or in hose assemblies passing visual inspection and proof test, is forty quarters (ten years) from the date of vulcanization. b. Shelf life of thermoplastic and polytetrauoroethylene hose is considered to be unlimited. Owwuwr.hypdrraoudlinuk.ccotmrange is constantly evolving and Hydraulink reserve the right to change technicCaoplysrigphte©cHifYicDRaAtiUoLnINsK FwLUitIhDoCuONt NnEoCtTiOcReS 2010 Ow 34 PRODUCT CATALOGUE 2020

2-8 0022-8 INFORMATIINOFNO-RHMOASTEION - HOSE CHARACTERNIOSTMICOSGROAFPGHAICTECSHHAORSTE STOCK TYPES The characteristics shown below are for the normal or usual rangFeloowf thCeaspeascpietcyiocfsHtoocskes.ASstsocekmsblies can be changed somewhat through different compounding to meetRtheecoremqumiremndenetds FoflospwecViealliosecdities applications. Flow Use the chart below to determine Hose I.D. based on Flow Tube and cover stocks may occasionally be upgradeadntdo tVaekleocaidtyv.aCnotangveerosfeilmy,pitrocvaendbme autseeridaltsoadnedtermine Velocity, technology. based on Flow and Hose I.D., or Flow based on Velocity and Hose I.D. For more detailed information on a specic hose tube or cover stock, please check the Chemical Resistance table in this section and also the specicEhxoasme pplaeg: eT.o determine the Hose I.D. needed to transport 20 gallons per minute (Gal/min)... Draw a straight line from 20 Gal/min on the left to recom- mended maximum velocity for pressure lines on the left. The line intersects the middle column indicating that a 3/4” I.D. (-12) hose should be the,s7m+4allest hose used. 5LVWYLUL 5P[YPSL /`WHSVU ,[O`SLUL *7, 7;-,7VS` 7VS` (JY`SVUP[YPSL *OLTPJHS *OVYVWYLUL HUK)\\[HKPLUL *OSVYVZ\\SMVUH[LK 7YVW`SLUL *OSVYPUH[LK [L[YHMS\\VYV 5HTL Type A Type C 5`SVU HT7oyVpS`seL[eOM`SIL.UDL . +PLUL 7VS`L[O`SLUL L[O`SLUL Flame Resistance =LY`.VVK 7VVY Type Z Type P .VVK Type J Type T .VVK 7VVY Velocity .VVK .VVK Petroleum Base Oils .VVK ,_JLSSLU[ .VVK[V,_JLSSLU[ .VVK 7VVY =LY`.VVK ,_JLSSLU[ Diesel Fuel -HPY[V.VVK .VVK[V,_JLSSLU[ .VVK[V,_JLSSLU[ .VVK 7VVY .VVK ,_JLSSLU[ Resistance to Gas .VVK .VVK .VVK;V,_JLSSLU[ .VVK[V,_JLSSLU[ -HPY[V.VVK .VVK .VVK[V Permeation ,_JLSSLU[ Weather .VVK[V,_JLSSLU[ 7VVY ,_JLSSLU[ =LY`.VVK ,_JLSSLU[ .VVK ,_JLSSLU[ Ozone .VVK[V,_JLSSLU[ 7VVYMVY;\\IL\" ,_JLSSLU[ =LY`.VVK 6\\[Z[HUKPUN .VVK ,_JLSSLU[ .VVK-VY*V]LY Heat .VVK .VVK .VVK =LY`.VVK ,_JLSSLU[ ,_JLSSLU[ ,_JLSSLU[ Low Temperature -HPY[V.VVK 7VVY[V-HPY ,_JLSSLU[ 7VVY .VVK[V .VVK ,_JLSSLU[ ,_JLSSLU[ Water-Oil Emulsions ,_JLSSLU[ ,_JLSSLU[ .VVK[V,_JLSSLU[ .VVK 7VVY ,_JLSSLU[ ,_JLSSLU[ Water/Glycol ,_JLSSLU[ ,_JLSSLU[ ,_JLSSLU[ ,_JLSSLU[ ,_JLSSLU[ ,_JLSSLU[ ,_JLSSLU[ Emulsions Diesters 7VVY 7VVY ,_JLSSLU[ -HPY ,_JLSSLU[ =LY`.VVK ,_JLSSLU[ Phosphate Esters -HPY-VY*V]LY 7VVY ,_JLSSLU[ -HPY =LY`.VVK =LY`.VVK ,_JLSSLU[ Phosphate -HPY-VY*V]LY 7VVY ,_JLSSLU[ -HPY =LY`.VVK =LY`.VVK ,_JLSSLU[ Ester Base Emulsions 9LNPZ[LYLK[YHKLTHYRVM+\\7VU[ Please note this chart uses Imperial Gallons, not U.S. Gallons. Ow Owwuwr.hypdrraoudlinuk.ccotmrange is cwownw.shytdaranutlilnyk.ceovmolviTngoacnodnHvyedrrtaIumlinpkerreisaelrGveatlhloenrisghtot toUc.hSanGgaelltoecnhsn,icCmaopluysrilgpthietp©clHyifYicDthaRAteiUoLnvINsoK FlwuLUimtIhDoCeCouOpNtbyrNniygEhoCt1tT©iOc.H2ReYSD02R10A1U0LINK FLUID CONNECTORS 2010 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice PRODUCT CATALOGUE 2020 35

2-9 HYDRAULINK BRANDED HOSE INDEX MULTISPIRAL HOSE FOUR/SIX SPIRAL WIRE ENDURO ST COVER FOUR/SIX SPIRAL WIRE SIX SPIRAL WIRE HOSE HOSE FOUR/SIX SPIRAL WIRE HOSE H13 HX6K HX5K Page 2 - 13 Page 2 - 12 HOSE Page 2 - 13 HX6K-ST Page 2 - 12 FOUR SPIRAL WIRE ENDURO ST COVER FOUR SPIRAL WIRE HOSE FOUR SPIRAL WIRE HOSE HX4K D12 Page 2 - 14 HOSE Page 2 - 15 HX4K-ST Page 2 - 14 SLIMLINE WIRE BRAID HOSE R16 TWO WIRE BRAID R19 TWO WIRE BRAID R17 ONE/TWO WIRE HOSE HOSE BRAID HOSE H16 H19 H17 Page 2 - 15 Page 2 - 16 Page 2 - 16 WIRE BRAID HOSE - 1SN/2SN TWO WIRE BRAID HOSE ONE WIRE BRAID HOSE H2T H1T Page 2 - 17 Page 2 - 18 36 PRODUCT CATALOGUE 2020

2 - 10 HYDRAULINK BRANDED HOSE INDEX HIGH TEMPERATURE HOSE HIGH TEMP TWO WIRE BRAID HOSE H2CXT Page 2 - 19 PRESSURE WASHER HOSE PRESSURE WASHER PRESSURE WASHER HOSE 250 BAR HJW250 HOSE 400 BAR Page 2 - 19 HJW400 JACKING HOSE Page 2 - 20 TWO WIRE BRAID JACKING HOSE DSJ Page 2 - 20 FIRE SUPPRESSION HOSE ONE WIRE BRAID HOSE H1FS Page 2 - 21 PRODUCT CATALOGUE 2020 37

2 - 11 HYDRAULINK BRANDED HOSE INDEX PILOT LINE HOSE ONE WIRE BRAID HOSE H1PL Page 2 - 21 38 PRODUCT CATALOGUE 2020

2 - 12 HYDRAULINK BRANDED HOSE MULTISPIRAL HOSE HX6K FOUR/SIX SPIRAL WIRE HOSE SPIRALLED WIRE REINFORCED HOSE - SAE 100 R15 • Due to manufacturing tolerances, external dimension is an average. • Recommended for: Extremely high pressure and high impulse hydraulic applications. • Suitable for: Conveying mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: Four (six for -20, -24) alternating layers of spiralled, high tensile steel wires. • External cover: Weather & abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to +121°C (125°C discontinuous) • Standards: Hydraulink proprietary. Exceeds SAE 100 R15. • Characteristics: Extra flexible, 1/2 SAE bend radius Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size Pressure - pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - psi bar psi bar mm DN Inches mm HX6K-06 06 10 3/8 20 6100 420 24400 1680 65 HX6K-08 HX6K-10 08 12 1/2 23 6100 420 24000 1680 90 HX6K-12 HX6K-16 10 16 5/8 26.6 6100 420 24000 1680 100 HX6K-20 HX6K-24 12 19 3/4 30.6 6100 420 24000 1680 120 16 25 1 37.8 6100 420 24000 1680 165 20 32 1 1/4 49.3 6100 420 24000 1680 300 24 38 1 1/2 57 6100 420 24000 1680 350 MULTISPIRAL HOSE HX6K-ST ENDURO ST COVER FOUR/SIX SPIRAL WIRE HOSE SPIRALLED WIRE REINFORCED HOSE - SAE 100 R15 • Due to manufacturing tolerances, external dimension is an average. • Recommended for: Extremely high pressure and high impulse hydraulic applications. • Suitable for: Conveying mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: Four (six for -20, -24) alternating layers of spiralled, high tensile steel wires. • External cover: SuperTuff weather & extra abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to +121°C (125°C discontinuous) • Standards: Hydraulink proprietary. Exceeds SAE 100 R15. • Characteristics: Extra flexible, 1/2 SAE bend radius Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size radius - Diameter - Diameter - Diameter - Pressure - pressure - pressure - pressure - mm DN Inches mm psi bar psi bar HX6K-12ST 12 19 3/4 30.6 4100 280 16400 1120 120 HX6K-16ST 16 25 1 37 4100 280 16400 1120 165 PRODUCT CATALOGUE 2020 39

2 - 13 HYDRAULINK BRANDED HOSE MULTISPIRAL HOSE HX5K FOUR/SIX SPIRAL WIRE HOSE SPIRALLED WIRE REINFORCED HOSE - SAE 100 R13 • Due to manufacturing tolerances, external dimension is an average. • Recommended for: Extremely high pressure and high impulse hydraulic applications. • Suitable for: Conveying mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: Four (six for -24) alternating layers of spiralled, high tensile steel wires. • External cover: Weather & abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to +121°C (125°C discontinuous) • Standards: Hydraulink proprietary. Exceeds SAE 100 R13. • Characteristics: Extra flexible, 1/2 SAE bend radius Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - Pressure - bar psi bar mm DN Inches mm psi HX5K-20 20 32 1 1/4 44.8 5100 350 20400 1400 280 HX5K-24 24 38 1 1/2 57.3 5100 350 20400 1400 300 MULTISPIRAL HOSE H13 SIX SPIRAL WIRE HOSE SPIRALLED WIRE REINFORCED HOSE - SAE 100 R13 • Due to manufacturing tolerances, external dimension is an average. • Recommended for: Extremely high pressure and high impulse hydraulic applications. • Suitable for: Conveying mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: Six alternating layers of spiralled, high tensile steel wires. • External cover: Weather & abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to +121°C (125°C discontinuous) • Standards: SAE 100 R15. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size Pressure - pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - psi bar psi bar mm DN Inches mm H13-32 32 51 2 71.1 5100 350 20400 1400 630 40 PRODUCT CATALOGUE 2020

2 - 14 HYDRAULINK BRANDED HOSE MULTISPIRAL HOSE HX4K FOUR SPIRAL WIRE HOSE SPIRALED WIRE REINFORCED HOSE - SAE 100 R12 • Due to manufacturing tolerances, external dimension is an average. • Recommended for: Very high pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber • Reinforcement: Four alternating layers of spiralled, high tensile steel wires. • External cover: Weather and abrasion resistant synthetic rubber. MSHA approve. • Temperature range: -40°C to +121°C (125°C discontinuous) • Standards: Hydraulink proprietary. Exceeds EN 856 R12. SAE 100 R12. • Characteristics: Extremely flexible, 1/2 SAE bend radius. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - Pressure - bar psi bar mm DN Inches mm psi HX4K-06 06 10 3/8 19.7 4100 280 16400 1120 65 HX4K-08 HX4K-10 08 12 1/2 22.7 4100 280 16400 1120 90 HX4K-12 HX4K-16 10 16 5/8 26.3 4100 280 16400 1120 100 HX4K-20 HX4K-24 12 19 3/4 30 4100 280 16400 1120 120 16 25 1 37 4100 280 16400 1120 150 20 32 1 1/4 44.6 4100 280 16400 1120 210 24 38 1 1/2 51.6 4100 280 16400 1120 290 MULTISPIRAL HOSE HX4K-ST ENDURO ST COVER FOUR SPIRAL WIRE HOSE SPIRALED WIRE REINFORCED HOSE - SAE 100 R12 • Due to manufacturing tolerances, external dimension is an average. • Recommended for: Very high pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber • Reinforcement: Four alternating layers of spiralled, high tensile steel wires. • External cover: SuperTuff Weather and extra abrasion resistant synthetic rubber. MSHA approve. • Temperature range: -40°C to +121°C (125°C discontinuous) • Standards: Hydraulink proprietary. Exceeds EN 856 R12. SAE 100 R12. • Characteristics: Extremely flexible, 1/2 SAE bend radius. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size radius - Diameter - Diameter - Diameter - Pressure - pressure - pressure - pressure - mm DN Inches mm psi bar psi bar HX4K-06ST 06 10 3/8 19.7 4100 280 16400 1120 65 HX4K-08ST HX4K-12ST 08 12 1/2 22.7 4100 280 16400 1120 90 HX4K-20ST 12 19 3/4 30 4100 280 16400 1120 120 20 32 1 1/4 44.6 4100 280 16400 1120 210 PRODUCT CATALOGUE 2020 41

2 - 15 HYDRAULINK BRANDED HOSE MULTISPIRAL HOSE D12 FOUR SPIRAL WIRE HOSE SPIRALED WIRE REINFORCED HOSE - SAE 100 R12 • Due to manufacturing tolerances, external dimension is an average. • Recommended for: Very high pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber • Reinforcement: Four alternating layers of spiralled, high tensile steel wires. • External cover: SuperTuff Weather and extra abrasion resistant synthetic rubber. MSHA approve. • Temperature range: -40°C to +121°C (125°C discontinuous) • Standards: Hydraulink proprietary. Exceeds EN 856 R12. SAE 100 R12. • Characteristics: Extremely flexible, 1/2 SAE bend radius. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - Pressure - bar psi bar mm DN Inches mm psi D12-32 32 51 2 66.7 2500 175 10000 700 630 SLIMLINE WIRE BRAID HOSE H16 R16 TWO WIRE BRAID HOSE BRAIDED WIRE REINFORCED HOSE - SAE 100R16 • Due to manufacturing tolerances, the external dimension is an average. • Recommended for: medium pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: One high-tensile steel braid for sizes -04, -06, & -08 and two high-tensile steel braid for sizes -12 & -16. • External cover: H.A.R.C weather & high abrasion resistance synthetic rubber. MSHA approved. • Temperature range: -40°C to 100°C (125°C discontinuous) • Standards: Meets or exceeds SAE 100R16, EN857 2SC. • Characteristics: Compact construction, extra flexible. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size Pressure - pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - psi bar psi bar mm DN inches mm H16-04ST 04 6 1/4 13.2 6100 420 24400 1680 45 H16-06ST H16-08ST 06 10 3/8 16.7 5100 350 20400 1400 65 08 12 1/2 20.1 5100 350 20400 1400 90 42 PRODUCT CATALOGUE 2020

2 - 16 HYDRAULINK BRANDED HOSE SLIMLINE WIRE BRAID HOSE H19 R19 TWO WIRE BRAID HOSE BRAIDED WIRE REINFORCED HOSE - SAE 100R19 • Due to manufacturing tolerances, the external dimension is an average. • Recommended for: Medium pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: One high-tensile steel braid for sizes -04, -06 -08 & -10 and two high-tensile steel braids for sizes -12 & -16. • External cover: Weather & high abrasion resistance synthetic rubber. MSHA approved. • Temperature range: -40°C to 100°C (125°C discontinuous) • Standards: SAE 100R19. • Characteristics: Compact construction, extra flexible. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size Pressure - pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - psi bar psi bar mm DN inches mm D19-10ST 10 16 5/8 23.8 4100 280 16400 1120 100 H19-12ST 12 19 3/4 27.8 4100 280 16400 1120 120 SLIMLINE WIRE BRAID HOSE H17 R17 ONE/TWO WIRE BRAID HOSE BRAIDED WIRE REINFORCED HOSE - SAE 100R17 • Due to manufacturing tolerances, the external dimension is an average. • Recommended for: Medium pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: One high-tensile steel braid for sizes -04, -06, -08 and two high-tensile steel braids for sizes -12, -16: • External cover: Weather & high abrasion resistance synthetic rubber. MSHA approved. • Temperature range: -40°C to 100°C (125°C discontinuous) • Standards: SAE 100R17. • Characteristics: Compact construction, extra flexible. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - Pressure - bar psi bar mm DN inches mm psi H17-04ST 04 6 1/4 12.3 3000 210 12000 840 50 H17-06ST H17-08ST 06 10 3/8 15.9 3000 210 12000 840 65 H17-12ST H17-16ST 08 12 1/2 19.1 3000 210 12000 840 90 12 19 3/4 28 3000 210 12000 840 100 16 25 1 35.3 3000 210 12000 840 150 PRODUCT CATALOGUE 2020 43

2 - 17 HYDRAULINK BRANDED HOSE WIRE BRAID HOSE - 1SN/2SN H2T TWO WIRE BRAID HOSE BRAIDED WIRE REINFORCED HOSE - EN 853 2SN • Due to manufacturing tolerances, the external dimension is an average. • Recommended for: High to medium pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: Two high tensile steel wire braids. • External cover: Weather & abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to +100°C constant (125°C discontinuous). • Standards: EN 853 2SN, SAE 100R2AT. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size radius - Diameter - Diameter - Diameter - Pressure - pressure - pressure - pressure - mm DN Inches mm psi bar psi bar H2T-04 04 6 1/4 14.3 5800 400 23200 1600 100 D2T-05 H2T-06 05 8 5/16 16 5100 350 20400 1400 115 H2T-08 H2T-10 06 10 3/8 18.4 4800 330 19200 1320 125 H2T-12 H2T-16 08 12 1/2 21.3 4000 275 16000 1100 180 H2T-20 H2T-24 10 16 5/8 24.7 3600 250 14400 1000 205 D2T-32 12 19 3/4 28.6 3100 215 12400 860 240 16 25 1 37.2 2400 165 9600 660 300 20 32 1 1/4 46.7 1800 125 7200 500 420 24 38 1 1/2 53.7 1300 90 5200 360 500 32 51 2 67 1150 80 4600 320 630 44 PRODUCT CATALOGUE 2020

2 - 18 HYDRAULINK BRANDED HOSE WIRE BRAID HOSE - 1SN/2SN H1T ONE WIRE BRAID HOSE BRAIDED WIRE REINFORCED HOSE - EN853 1SN • Due to manufacturing tolerances, the external dimension is an average. • Recommended for: Medium pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: One high-tensile steel braid. • External cover: Weather & abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to 100°C (125°C discontinuous) • Standards: EN 853 1SN, SAE 100R1AT. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size radius - Diameter - Diameter - Diameter - Pressure - pressure - pressure - pressure - mm DN inches mm psi bar psi bar D1T-03 03 5 3/16 11.5 3650 250 1460 1000 90 H1T-04 H1T-06 04 6 1/4 12.8 3250 225 13000 900 100 H1T-08 D1T-10 06 10 3/8 16.9 2600 180 10400 720 125 H1T-12 H1T-16 08 12 1/2 19.9 2300 160 9200 640 180 H1T-20 H1T-24 10 16 5/8 24.7 3600 250 14400 1000 205 D1T-32 12 19 3/4 27.1 1500 105 6000 420 240 16 25 1 35.1 1300 87 5200 348 300 20 32 1 1/4 42.5 900 62 3600 248 450 24 38 1 1/2 49.8 725 50 2900 200 500 32 51 2 63.9 580 40 2320 160 630 PRODUCT CATALOGUE 2020 45

2 - 19 HYDRAULINK BRANDED HOSE HIGH TEMPERATURE HOSE H2CXT HIGH TEMP TWO WIRE BRAID HOSE FAHRENHEIT HIGH TEMP - BRAIDED WIRE REINFORCED HOSE - EN 857 2SC • Due to manufacturing tolerances, the external dimension is an average. • Recommended for: High to medium pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, diesel, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: Two high tensile steel wire braids. • External cover: Weather & abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to +135°C constant (150°C discontinuous). Air not higher than 121°C • Standards: EN 857 2SC, SAE J30 Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - Pressure - bar psi bar mm DN Inches mm psi H2CXT-04 04 6 1/4 14.3 5800 400 23200 1600 100 H2CXT-06 H2CXT-08 06 10 3/8 18.4 4800 330 19200 1320 125 H2CXT-10 H2CXT-12 08 12 1/2 21.3 4000 275 16000 1100 180 H2CXT-16 H2CXT-20 10 16 5/8 24.7 3600 250 14400 1000 205 H2CXT-24 D2XT-32 12 19 3/4 28.6 3100 215 12400 860 240 16 25 1 37.2 2400 165 9600 660 300 20 32 1 1/4 46.7 1800 125 7200 500 420 24 38 1 1/2 53.7 1300 90 5200 360 500 32 51 2 67 1150 80 4600 320 630 PRESSURE WASHER HOSE HJW250 PRESSURE WASHER HOSE 250 BAR BRAIDED WIRE REINFORCED HOSE • Due to manufacturing tolerances, the external dimension is an average. • Suitable for: Water, water-soap, emulsion. • Internal tube: Synthetic rubber. • Reinforcement: One high-tensile steel braid. • External cover: Weather & high abrasion resistance synthetic rubber. Blue cover. • Temperature range: -40°C to +150°C. • Standards: Proprietary. • Characteristics: Compact construction, extra flexible. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size radius - Diameter - Diameter - Diameter - Pressure - pressure - pressure - pressure - mm DN inches mm psi bar psi bar HJW250-04B 04 6 1/4 12.8 3625 250 14500 1000 100 HJW250-06B 06 10 3/8 16.9 3625 250 14500 1000 120 46 PRODUCT CATALOGUE 2020

2 - 20 HYDRAULINK BRANDED HOSE PRESSURE WASHER HOSE HJW400 PRESSURE WASHER HOSE 400 BAR BRAIDED WIRE REINFORCED HOSE • Due to manufacturing tolerances, the external dimension is an average. • Suitable for: Water, water-soap, emulsion. • Internal tube: Synthetic rubber. • Reinforcement: Two high-tensile steel braids. • External cover: Weather & high abrasion resistance synthetic rubber. Blue cover. • Temperature range: -40°C to +150°C. • Standards: Proprietary. • Characteristics: Compact construction, extra flexible. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size radius - Diameter - Diameter - Diameter - Pressure - pressure - pressure - pressure - mm DN inches mm psi bar psi bar HJW400-06B 06 10 3/8 17.5 5800 400 23200 1600 80 JACKING HOSE DSJ TWO WIRE BRAID JACKING HOSE BRAIDED WIRE REINFORCED JACK HOSE • Due to manufacturing tolerances, the external dimension is an average. •Static (non-impulse) pressure rating for hydraulic jack applications only, reduced safety factor (2:1) • Recommended for: Hydraulic jack applications. • Suitable for: Mineral & vegetable oils. • Internal tube: Synthetic rubber. • Reinforcement: Two high-tensile steel braids. • External cover: Weather & high abrasion resistance synthetic rubber. MSHA approved. • Temperature range: -40°C to +100°C (150°C discontinuous) • Standards: Proprietary. (Meets performance requirements of former IJ100 standard) • Characteristics: Compact construction. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - Pressure - bar psi bar mm DN inches mm psi DSJ-04 04 6 1/4 13.3 10000 700 20000 1400 50 DSJ-06 06 10 3/8 17.3 10000 700 20000 1400 65 PRODUCT CATALOGUE 2020 47

2 - 21 HYDRAULINK BRANDED HOSE FIRE SUPPRESSION HOSE H1FS ONE WIRE BRAID HOSE RED FIRE SUPPRESSANT BRAIDED WIRE REINFORCED HOSE - SAE 100R1 Type AT • Due to manufacturing tolerances, the external dimension is an average. • Recommended for: Medium pressure hydraulic applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: One high-tensile steel braid. • External cover: Weather & abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to 100°C (125°C discontinuous) • Standards: EN 853 1SN, SAE 100R1AT. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size Pressure - pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - psi bar psi bar mm DN inches mm H1FS-04 04 6 1/4 12.8 3250 225 13000 900 100 H1FS-08 08 12 1/2 19.9 2300 160 9200 640 180 H1FS-12 12 19 3/4 27.1 1500 105 6000 420 240 PILOT LINE HOSE H1PL ONE WIRE BRAID HOSE PILOT LINE HOSE WITH EMBOSSED LAYLINE • Due to manufacturing tolerances, the external dimension is an average. • Recommended for: Pilot line applications. • Suitable for: Mineral & vegetable oils, water-based solutions, water, air & inert gases. • Internal tube: Synthetic rubber. • Reinforcement: One high-tensile steel braid. • External cover: Weather & abrasion resistant synthetic rubber. MSHA approved. • Temperature range: -40°C to 100°C (125°C discontinuous) • Standards: EN 853 1SN, SAE 100R1AT. Part Number Internal Internal Internal External Working Working Min burst Min burst Min bend Size Pressure - pressure - pressure - pressure - radius - Diameter - Diameter - Diameter - psi bar psi bar mm DN inches mm H1PL-04 04 6 1/4 11.5 1750 120 7000 480 25 H1PL-06 06 10 3/8 14.8 1450 100 5800 400 40 48 PRODUCT CATALOGUE 2020

SECTION 3 HYDRAULIC HOSE 10 PRODUCT CATALOGUE 2019

3-1 HYDRAULIC HOSE - AGENCY RANGE HOSE SELECTION & SERVICE LIFE RECOMMENDATIONS Extracts from SAE J1273 DEC2014: Recommended Practices for Hydraulic Hose Assemblies  6FRSH—SAE J1273 provides guidelines for selection, routing, fabrication, installation, replace- ment, maintenance, and storage of hose and hose assemblies for�fluid-power systems. Many of these SAE Recommended Practices also may be suitable for other hoses and systems.  +RVH6HOHFWLRQDQG5RXWLQJ—A wide variety of interacting factors influence hose service life�and the ability of each�f�luid-power system to operate satisfactorily, and the combined effects of these factors on service life are often unpredictable. Therefore, these documents should not be construed as design standards. For applications outside the specif�cations in SAE J517, SAE J514, or other relevant design standards, performance of hose assemblies should be determined by appropriate testing. Carefully analyze each system. Then design routings and select hose and related compo- nents to meet the system-performance and hose-service-life requirements, and to minimize the risks of personal injury and/or property damage. Consider the following factors: 5.1 System Pressures—Excessive pressure can accelerate hose assembly failure. Analyze the steady-state pressures, and the frequency and amplitude of pressure surges, such as pulses and spikes. These are rapid and transient rises in pressure which may not be indicated on many common pressure gauges and can be identif�ed best on high-frequency-response electronic measuring instru- ments. For maximum hose service life, hose selection should be based on a system pressure, including surges, that is less than the hose maximum working pressure. Hose may be used above its maxi- mum working pressure where reduced life expectancy is acceptable. SAE J1927 provides one method to help predict wire-reinforced hose service life for a given hydraulic application, where the surge pressure peaks vary, and/or the highest pressure peaks occur infrequently. 5.2 Suction—For suction applications, such as inlet�flow to pumps, select hose to withstand both the negative and positive pressures the system imposes on the hose. 5.3 External Pressure—In certain applications, such as in autoclaves or under water, the external environmental pressures may exceed the�fluid pressure inside the hose. In these applications, con- sider the external pressures, and if necessary, consult the manufacturers. 5.4 Temperature—Exceeding hose temperature ratings may signif�cantly reduce hose life. Select hose so the�fluid and ambient temperatures, both static and transient, fall within the hose ratings. The effects of external heat sources should not raise the temperature of the hose above its maximum op- erating temperature. Select hose, heat shields, sleeving, and other methods for these requirements, �����������������l����������������������������f�����������l�������������� Owwuwr.hypdrraoudlinuk.ccotmrange is constantly evolving and Hydraulink reserve the right to change technicCaoplysrigphet ©cHifYicDaRAtiUoLnINsK FwLUitIhDoCuONt NnEoCtTiOcReS 2010 50 PRODUCT CATALOGUE 2020