AUregular_noprice_all

6-3 INFORMATION - FIELD ATTACHABLES SE PART NUMBERING SYSTEM – EXAMPLES CODE 01 Part number: F01-0606 02 Complete desription: 3/8” BSPP swivel nut 03 female x 3/8” hose tail, straight eld 04 attachable coupling. 05 06 F 01 - 06 06 07 08 Module 1. Prefix letter Module 4. Hosetail O.D. 09 “F” for field attachable “06” for 6/16ths = 3/8” 10 11 Module 2. Series code Module 3. Coupling end size 110 “01” for BSPP swivel nut “06” for 6/16ths = 3/8” 12 female, straight coupling 13 13R 5 133 135 Part number: F64-1206 14 Complete desription: 3/4” JIC swivel nut female 15 x 3/8” hose tail, swept 45° eld attachable 16 coupling. 17 18 F 64 - 1026 06 19 20 Module 1. Prefix letter Module 4. Hosetail O.D. 21 “F” for field attachable “06” for 6/16ths = 3/8” 22 225 Module 2. Series code Module 3. Coupling end size 226 “64” for JIC swivel nut ““1026”” ffoorr 162/1/166ththss=- 3/84” 23 female, swept 45o coupling 236 24 www.hydraulink.com Copyright © HYDRAULINK FLUID CONNECTORS 2010 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 39N 39F 40 S40N 41 42 43 44 45 456 46 465 466 47 48 49 50 www.hydra Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

6-4 INFORMATION SERIES CODES AND DESCRIPTIONS - HOSETAILS CODE DESCRIPTION CODE DESCRIPTION 01 BSP PARALLEL SWIVEL NUT FEMALE 02 BSP PARALLEL SWIVEL NUT FEMALE FLATFACE 51 BSPP SWIVEL NUT FEMALE 90° SWEPT BEND 03 SAE SWIVEL NUT FEMALE 04 JIC SOLID (FIXED) FEMALE 52 ORFS SWIVEL NUT FEMALE 90° SWEPT BEND 05 JIC SWIVEL NUT FEMALE 06 BSPT SOLID (FIXED) FEMALE 53 METRIC ISO/GAZ SWIVEL NUT FEMALE 90° SWEPT BEND 07 NPSM SWIVEL NUT FEMALE 08 BSP PARALLEL SOLID (FIXED) FEMALE 54 SAE CODE 62 FLANGE 60° SWEPT BEND 09 SAE MALE 10 SAE INVERTED FLARE MALE 545 CAT XT5 FLANGE 60° SWEPT BEND 11 NPTF SOLID (FIXED) FEMALE 110 SAE CODE 61 FLANGE 110° SWEPT BEND 55 JIC SWIVEL NUT FEMALE 90° SWEPT BEND 12 BSP PARALLEL MALE 13 ORFS SWIVEL NUT FEMALE 56 ORFS SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 13R ORFS SWIVEL NUT FEMALE, SHORT STEM 133 ORFS SWIVEL NUT FEMALE 30° SWEPT BEND 57 BSPP SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 135 SAE CODE 61 FLANGE 135° SWEPT BEND 14 BSP TAPER MALE SWIVEL 58 JIC SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 15 BSP TAPER MALE 16 NPTF MALE 59 SAE CODE 61 FLANGE 90° SWEPT BEND 17 METRIC MALE (STUD END) 18 JIC MALE 60 BSPP SWIVEL NUT FEMALE 45° SWEPT BEND 19 UNO MALE SWIVEL 20 UNO MALE 61 SAE CODE 62 FLANGE 90° SWEPT BEND 21 POCLAIN FLANGE 22 SAE CODE 62 FLANGE STRAIGHT 615 CAT XT5 FLANGE 90° SWEPT BEND 225 CAT XT5 FLANGE STRAIGHT 226 O&K SAE CODE 62 FLANGE STRAIGHT 616 O&K SAE CODE 62 FLANGE 90° SWEPT BEND 23 SAE CODE 61 FLANGE STRAIGHT 236 O&K SAE CODE 61 FLANGE STRAIGHT 62 SAE CODE 62 FLANGE 45° SWEPT BEND 24 BSPT MALE SWIVEL 90° 25 BSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT 625 CAT XT5 FLANGE 45° SWEPT BEND 26 BSPT MALE 90° COMPACT 27 SAE SWIVEL NUT FEMALE 90° COMPACT 626 O&K SAE CODE 62 FLANGE 45° SWEPT BEND 28 JIC MALE SWIVEL 90° COMPACT 29 JIC SWIVEL NUT FEMALE 90° COMPACT 63 ORFS SWIVEL NUT FEMALE 45° SWEPT BEND 30 WATERBLAST SWIVEL NUT FEMALE 31 DIN METRIC 60° CONE MALE STRAIGHT 64 JIC SWIVEL NUT FEMALE 45° SWEPT BEND 32 UNO MALE SWIVEL 90° COMPACT 33 JIC MALE 90° COMPACT 65 MINI-CHECK TEST POINT METRIC FEMALE/SPIGOT 34 JIS (KOMATSU) METRIC MALE 35 JIS 30° FLARE (MITSUBISHI) MALE 66 SAE CODE 61 FLANGE 60° SWEPT BEND 36 BSP TAPER MALE 45° 37 SAE SWIVEL NUT FEMALE 45° SWEPT BEND 67 SAE CODE 61 FLANGE 22.5° SWEPT BEND 38 BANJO 39 POCLAIN FLANGE 674 SAE CODE 62 FLANGE 22.5° SWEPT BEND 39N POCLAIN FLANGE 90° 39F POCLAIN FLANGE 45° 675 CAT XT5 FLANGE 22.5° SWEPT BEND 40 ORFS MALE S40N ORFS MALE 90° SWEPT BEND 68 SAE CODE 61 FLANGE 45° SWEPT BEND 41 SAE SWIVEL NUT FEMALE 90° SWEPT BEND 42 SAE INVERTED FLARE MALE 45° SWEPT BEND 69 SAE CODE 61 FLANGE 67.5° SWEPT BEND 43 SAE INVERTED FLARE MALE 90 SWEPT BEND 44 KOBELCO METRIC MALE 695 CAT XT5 FLANGE 67.5° SWEPT BEND 45 SAE CODE 61 FLANGE 30° SWEPT BEND 456 O&K SAE CODE 61 FLANGE 30° SWEPT BEND 70 JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 46 SAE CODE 62 FLANGE 30° SWEPT BEND 465 CAT XT5 FLANGE 30° SWEPT BEND 71 JIS ( KOMATSU ) FLANGE STRAIGHT 466 O&K SAE CODE 62 FLANGE 30° SWEPT BEND 47 FRENCH GAZ METRIC MALE 72 JIS ( KOMATSU ) FLANGE 90° SWEPT BEND 48 JIS ( KOMATSU ) METRIC MALE 49 STAPLELOCK FEMALE 73 JIS ( KOMATSU ) FLANGE 45° SWEPT BEND 50 STAPLELOCK MALE 74 FRENCH GAZ METRIC SWIVEL NUT FEMALE 75 JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALE 76 DIN METRIC 60° CONE SWIVEL NUT FEMALE 77 METRIC GLOBESEAL SWIVEL NUT FEMALE 78 HEAVY DIN METRIC MALE 79 HEAVY DIN METRIC SWIVEL NUT FEMALE 80 LIGHT DIN METRIC MALE 81 LIGHT DIN METRIC SWIVEL NUT FEMALE 82 METRIC STANDPIPE 83 HEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 84 HEAVY DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND 85 HEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACT 86 LIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 87 LIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND 88 LIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACT 89 JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 90 HOSE JOINER 91 JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEM. 90° SWEPT BEND 92 IMPERIAL STANDPIPE 93 METRIC 90° STANDPIPE 94 SAE IMPERIAL TUBE CONNECTOR 95 DIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 96 LIFESAVER 97 WEO (CEJN) STRAIGHT STANDPIPE 109 METRIC 45O FLARE BULKHEAD 131 CHINESE FLAT FACE STRAIGHT FEMALE SUFFIX CODES FOR SERIES CODES N NINETY DEGREE e.g. S40N F FORTY FIVE DEGREE e.g. S40F S SWIVEL MALE e.g. SI8S K COMPACT BLOCK 45° e.g. S64K, S60K C CYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01C H HEXAGONAL BAR TAIL STYLE e.g. S05H SUFFIX CODES FOR PART NUMBERS X EXTENDED DROP LENGTH IN MM e.g S615-1616-X132 TORS 2010 www.hydraulink.com PREFIX CODES FOR SERIES GS GATES GLOBAL SPIRAL NON-SKIVE e.g. GS01-2020 GSM GATES GLOBAL SPIRAL MAXIMUM NON-SKIVE e.g. GSM01-3232 Copyright © HYDRAULINK FLUID CONNECTORS 2010 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

6-5 INFORMATION - FIELD ATTACHABLES BSP BSP 05 BS ASSEMBLY IINNSFTORRUMCTAIOTINOSN - FIELD ATTACHABLES BS Non-Skive Field Attachable Couplings BSP AE“naSsriuSnrgeE”.hMosBe LisYcuItNsqSuaTrRe, UwiCthTmIiOnimNaSl end JIBCSP JIC SNcorne-wSkfeivrreulFeiebloddAy totanctohhaobslee Cinoaunplainntgi-s Eclnoscukwreisheodseireisctciount suqnutial rheo,sweitihs 3mtinoim5malmencdlear JIC “ofainrisnigd”e. body. JIC SLicgrhetwly fleurbrruicleatbeotdhyeotnatilopiheocseeainndatnheanfetim- ale tchlorecakwd iosfethdeirefectrirounleubnotidl yh,otsheeniss3crtoew5mthme clear JIC toafilipniseicdee ibnotodyt.he ferrule body in a clockwise direction until the hex on the tailpiece abuts the ORJICF fLeigrrhutlley bluobdryic.ate the tailpiece and the female ORF thread of the ferruke body, then screw the tailpiece into the ferrule body in a clockwise ORF direction until the hex on the tailpiece abuts the ORF ferrule body. www.hydra 5 www.hydra 5 Please refer to training manual for more detailed assembly instructions. wwwP.hylderaaulinsk.ecomrefer to training manual for more detailed assembly instructions.Copyright © HYDRAULINK FLUID CONNECTORS 2010 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice www.hydraulink.com Copyright © HYDRAULINK FLUID CONNECTORS 2010

6-6 FIELD ATTACHABLE HOSETAILS INDEX BSP BSPT MALE STRAIGHT BSP FEMALE STRAIGHT BSP FEMALE 45° ELBOW BSP FEMALE 90° ELBOW F15 F01 F60 F25 Page 6 - 8 Page 6 - 8 Page 6 - 9 Page 6 - 9 BSP FEMALE 90° ELBOW F51 Page 6 - 10 JIC JIC MALE STRAIGHT JIC FEMALE STRAIGHT JIC FEMALE 45° ELBOW JIC FEMALE 90° ELBOW F18 F05 F64 F29 Page 6 - 10 Page 6 - 11 Page 6 - 11 Page 6 - 12 JIC FEMALE 90° ELBOW F55 Page 6 - 12

6-7 FIELD ATTACHABLE HOSETAILS INDEX BRAZE SOCKET IMPERIAL BRAZE SOCKET F96 Page 6 - 13 LPG HOSE FITTINGS NPT MALE SAE FEMALE STRAIGHT SAE FEMALE SWEPT 90° A14-1NPT A380-1 A380-9 Page 6 - 13 Page 6 - 13 Page 6 - 14

6-8 FIELD ATTACHABLE HOSETAILS BSP F15 BSPT MALE STRAIGHT BSP TAPERED MALE STRAIGHT Part Number BSPT Male Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) C (mm) Thread (T) F15-0404 1/4 6.4 04 16 20 F15-0604 1/4-19 1/4 6.4 04 19 23 F15-0606 3/8-19 3/8 9.5 06 19 23 F15-0806 3/8-19 3/8 9.5 06 22 27 F15-0808 1/2-14 1/2 12.7 08 22 27 F15-1010 1/2-14 5/8 15.9 10 25 27 F15-1212 5/8-14 3/4 19 12 29 32 F15-1616 3/4-14 1 25.4 16 35 36 1-11 BSP F01 BSP FEMALE STRAIGHT BSP 60° CONE FEMALE SWIVEL NUT STRAIGHT Part Number BSPP Female Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) H2 (mm) C (mm) Thread (T) F01-0404 19 16 17 F01-0604 1/4-19 1/4 6.4 04 22 19 19 F01-0606 22 19 19 F01-0806 3/8-19 1/4 6.4 04 27 22 23 F01-0808 27 22 23 F01-1010 3/8-19 3/8 9.5 06 30 25 24 F01-1212 32 32 29 F01-1616 1/2-14 3/8 9.5 06 38 38 30 1/2-14 1/2 12.7 08 5/8-14 5/8 15.9 10 3/4-14 3/4 19 12 1-11 1 25.4 16

6-9 FIELD ATTACHABLE HOSETAILS BSP F60 BSP FEMALE 45° ELBOW BSP 60° CONE FEMALE SWIVEL NUT 45° ELBOW Part Number BSPP Female Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) L (mm) C (mm) Thread (T) F60-0404 19 22 39 F60-0606 1/4-19 1/4 6.4 04 22 24 41 F60-0808 27 28 50 F60-1212 3/8-19 3/8 9.5 06 32 30 61 F60-1616 38 37 74 1/2-14 1/2 12.7 08 3/4-14 3/4 19 12 1-11 1 25.4 16 BSP F25 BSP FEMALE 90° ELBOW BSP 60° CONE FEMALE SWIVEL NUT 90° ELBOW COMPACT Part Number BSPP Female Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) L (mm) C (mm) Thread (T) F25-0404 19 20 11 F25-0606 1/4-19 1/4 6.4 04 22 27 15 F25-0808 27 30 19 F25-1212 3/8-19 3/8 9.5 06 32 34 21 F25-1616 38 42 28 1/2-14 1/2 12.7 08 3/4-14 3/4 19 12 1-11 1 25.4 16

6 - 10 FIELD ATTACHABLE HOSETAILS BSP F51 BSP FEMALE 90° ELBOW BSP 60° CONE FEMALE SWIVEL NUT 90° ELBOW Part Number BSPP Female Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) L (mm) C (mm) Thread (T) F51-0404 19 32 23 F51-0606 1/4-19 1/4 6.4 04 22 40 30 F51-0806 27 40 30 F51-0808 3/8-19 3/8 9.5 06 27 46 36 F51-1212 32 55 47 F51-1616 1/2-14 3/8 9.5 06 38 71 58 1/2-14 1/2 12.7 08 3/4-14 3/4 19 12 1-11 1 25.4 16 JIC JIC THREAD Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) C (mm) F18 7/16-20 1/4 6.4 04 16 20.5 9/16-18 1/4 6.4 04 16 20.5 JIC MALE STRAIGHT 9/16-18 3/8 9.5 06 19 22.5 JIC MALE 37° CONE 3/4-16 3/8 9.5 06 22 24.8 3/4-16 1/2 12.7 08 22 24.8 Part Number 7/8-14 1/2 12.7 08 25 27.5 7/8-14 5/8 15.9 10 25 27.5 F18-0704 1.1/16-12 3/4 19 12 28 31.9 F18-0904 1.5/16-12 1 25.4 16 35 24 F18-0906 F18-1206 F18-1208 F18-1408 F18-1410 F18-1712 F18-2116

6 - 11 FIELD ATTACHABLE HOSETAILS JIC F05 JIC FEMALE STRAIGHT JIC 37° FLARE FEMALE SWIVEL NUT STRAIGHT BACK HEX Part Number JIC THREAD Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) H2 (mm) C (mm) F05-0704 7/16-20 1/4 6.4 04 15 14 13 F05-0904 19 17 17 F05-0906 9/16-18 1/4 6.4 04 19 17 17 F05-1206 24 19 18 F05-1208 9/16-18 3/8 9.5 06 24 22 18 F05-1408 27 22 19 F05-1410 3/4-16 3/8 9.5 06 27 25 19 F05-1712 32 30 24 F05-2116 3/4-16 1/2 12.7 08 38 38 27 7/8-14 1/2 12.7 08 7/8-14 5/8 15.9 10 1.1/16-12 3/4 19 12 1.5/16-12 1 25.4 16 JIC F64 JIC FEMALE 45° ELBOW JIC 37° FLARE FEMALE SWIVEL NUT 45° ELBOW Part Number JIC THREAD Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) L (mm) C (mm) F64-0704 7/16-20 1/4 6.4 04 15 17 33 F64-0904 19 19 34 F64-0906 9/16-18 1/4 6.4 04 19 21 41 F64-1206 24 21 41 F64-1208 9/16-18 3/8 9.5 06 24 23 47 F64-1408 27 23 47 F64-1410 3/4-16 3/8 9.5 06 27 25 49 F64-1712 32 29 58 F64-2116 3/4-16 1/2 12.7 08 27 32 68 7/8-14 1/2 12.7 08 7/8-14 5/8 15.9 10 1.1/16-12 3/4 19 12 1 5/16-12 1 19 12

6 - 12 FIELD ATTACHABLE HOSETAILS JIC F29 JIC FEMALE 90° ELBOW JIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOW COMPACT Part Number JIC THREAD Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) L (mm) C (mm) F29-0704 7/16-20 1/4 6.4 04 15 19 12 F29-0904 19 21 12 F29-0906 9/16-18 1/4 6.4 04 19 26 16 F29-1206 24 27 17 F29-1208 9/16-18 3/8 9.5 06 24 29 19 F29-1408 27 30 19 3/4-16 3/8 9.5 06 3/4-16 1/2 12.7 08 7/8-14 1/2 12.7 08 JIC F55 JIC FEMALE 90° ELBOW JIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOW Part Number JIC THREAD Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) L (mm) C (mm) F55-0704 7/16-20 1/4 6.4 04 15 27 23 F55-0904 19 29 23 F55-0906 9/16-18 1/4 6.4 04 19 34 30 F55-1206 24 35 30 F55-1208 9/16-18 3/8 9.5 06 24 39 36 F55-1408 27 45 36 F55-1410 3/4-16 3/8 9.5 06 27 50 42 F55-1712 32 55 47 F55-2116 3/4-16 1/2 12.7 08 41 68 58 7/8-14 1/2 12.7 08 7/8-14 5/8 15.9 10 1.1/16-12 3/4 19 12 1.5/16-12 1 25.4 16

6 - 13 FIELD ATTACHABLE HOSETAILS BRAZE SOCKET F96 IMPERIAL BRAZE SOCKET IMPERIAL TUBE (LIFESAVER) BRAZE SOCKET STRAIGHT Part Number Socket I.D (in) Hose I.D (in) Hose I.D (mm) Dash size H1 (mm) C (mm) F96-0404 1/4 1/4 6.4 04 16 9 F96-0606 3/8 3/8 9.5 06 19 12 F96-0808 1/2 1/2 12.7 08 22 13 F96-1212 3/4 3/4 19 12 29 15 F96-1616 1 1 25.4 16 35 19 LPG HOSE FITTINGS A14-1NPT NPT MALE NPT MALE HOSE TAIL TO SUIT 5LPG GAS HOSE Part Number NPTF Male Thread Suits Hex (1) Hex (2) Overall Length - A14-1NPT (T) 5LPG 15.8 20.6 mm 1/4-18 51.6 LPG HOSE FITTINGS A380-1 SAE FEMALE STRAIGHT SAE FEMALE HOSE TAIL TO SUIT 5LPG HOSE Part Number SAE Female Suits Hex (1) Hex (2) Overall Length - A380-1 Thread (T) 5LPG 19 20.6 mm 5/8 - 18 55

6 - 14 FIELD ATTACHABLE HOSETAILS LPG HOSE FITTINGS A380-9 SAE FEMALE SWEPT 90° SAE FEMALE SWEPT 90° TO SUIT 5LPG HOSE Part Number SAE Female Suits Hex (1) Hex (2) Overall Length - Drop Length A380-90 Thread (T) 5LPG 19 20.6 mm 5/8 - 18 63.5 37.8

SECTION 7 FIELD ATTACHABLE FERRULES 14 PRODUCT CATALOGUE 2019

7-1 INFORMATION - FIELD ATTACHABLES AS GENERAL INFORMATION Non Ensu The eld attachable ferrules listed in this section are specically designed for use with SAE 100R1AT “ari and SAE100R2AT hose and the eld attachable ferrules listed in section ve of this catalogue. Use of component combinations other than those specied may result in reduced service life or premature Scre failure of the hose assembly. In such cases no warranty will apply. cloc of in Hydraulink eld attachable ferrules are of a proprietary design, and have all been comprehensively tested within the performance parameters of the relevant hose types. To obtain maximum perfor- Ligh mance from hose assemblies, eld attachable ferrules must be assembled as per Hydraulink’s follow- threa ing assembly instructions. tailp direc All dimensions shown are nominal, and subject to change due to ongoing product development. For ferru critical applications, please contact Hydraulink to conrm dimensions. Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci- cation of any product listed in this catalogue. 6 www.hydraulink.com Copyright © HYDRAULINK FLUID CONNECTORS 2010 Plea www.hydrau Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice 06 fa ferrules.indd 238-239

1AT 7-2 se ature INFORMATION - FIELD ATTACHABLES 1AT 06 lsye ature ASSEMBLY IINNSFTORRUMCTAIOTINOSN - FIELD ATTACHABLES low- Non-Skive Field Attachable Couplings ly For AEnSsuSreEhMosBe LisYcuItNsqSuaTrRe, UwiCthTmIiOnimNaSl end low- “aring”. i- SNcorne-wSkfeivrreulFeiebloddAy totanctohhaobslee Cinoaunplainntgi-s For oc“Elfnoaiscnriuksnwrigedi”es.heobdoseidreyi.sctciount suqnutial rheo,sweitihs 3mtinoim5malmencdlear LSicgrhetwly fleurbrruicleatbeotdhyeotnatilopiheocseeainndatnheanfetim- ale i- cthlorecakwd iosfethdeirefectrirounleubnotidl yh,otsheeniss3crtoew5mthme clear otafilipniseidcee ibnotodyt.he ferrule body in a clockwise direction until the hex on the tailpiece abuts the fLeigrrhutlley bluobdryic.ate the tailpiece and the female thread of the ferruke body, then screw the tailpiece into the ferrule body in a clockwise direction until the hex on the tailpiece abuts the ferrule body. 6 6 Please refer to training manual for more detailed assembly instructions. TORS 2010 wwwP.hylderaaulinsk.ecomrefer to training manual for more detailed assembly instCroupycrightti©oHnYDsRA.ULINK FLUID CONNECTORS 2010 TORS 2010 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice www.hydraulink.com Copyright © HYDRAULINK FLUID CONNECTORS 22041/006/10 3:11 PM 24/06/10 3:11 PM

7-3 FIELD ATTACHABLE FERRULES INDEX FIELD ATTACHABLE FERRULE FIELD ATTACHABLE FIELD ATTACHABLE FERRULE FERRULE FN1 FN2 Page 7 - 4 Page 7 - 4

7-4 FIELD ATTACHABLE FERRULES FIELD ATTACHABLE FERRULE FN1 FIELD ATTACHABLE FERRULE NON-SKIVE FIELD ATTACHABLE FERRULE FOR H1T & G1 HOSE Part Number Hose I.D (in) Hose I.D (mm) Dash size L (mm) H (mm) 38 19 FN1-04 1/4 6.5 04 45 22 FN1-06 3/8 9.5 06 49 25 FN1-08 1/2 12.7 08 50 29 FN1-10 5/8 16.0 10 59 32 FN1-12 3/4 19.0 12 70 41 FN1-16 1 25.4 16 L (mm) H (mm) FIELD ATTACHABLE FERRULE 38 19 45 22 FN2 49 25 50 32 FIELD ATTACHABLE FERRULE 59 32 NON-SKIVE FIELD ATTACHABLE FERRULE FOR H2T & G2 70 45 HOSE Part Number Hose I.D (in) Hose I.D (mm) Dash size FN2-04 1/4 6.5 04 FN2-06 3/8 9.5 06 FN2-08 1/2 12.7 08 FN2-10 5/8 16.0 10 FN2-12 3/4 19.0 12 FN2-16 1 25.4 16

PUSH-ON COUPLINGS SECTION 8 PRODUCT CATALOGUE 2019 15

8-1 PA INFORMATION - PUSH-ON COUPLINGS The ber GENERAL INFORMATION Mod The Hydraulink range of hose couplings are available in three main series; Swage, Field Attachable Mod (often referred to as reusable) and Push-on. The push-on series hosetail (also described as push-lock) is designed to be suitable for use with low pressure hose such as SAE 100R6 or equivalent (e.g. Gates LOLA or GTH hoses). Use of hoseclips or hose clamps to secure the hosetail is not recommended and will cause premature damage to the internal tube. Hydraulink thread forms and sealing methods are manufactured to the relevant international stan- dards where applicable. All dimensions shown are nominal, and subject to change due to ongoing product development. For critical applications, please contact Hydraulink to conrm dimensions. Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci- cation of any product listed in this catalogue. Mod 7 Mod Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

8-2 INFORMATION - PUSH-ON COUPLINGS PART NUMBERING SYSTEM – STEEL PUSH-ON COUPLINGS ble The Hydraulink part numbering system is a concise product description in coded form. The part num- ber consists of four modules as follows: low Module 1. Prex letter; denotes coupling type. lips he S = Swage F = Field Attachable (Reusable) - P = Push-on g R5 = Field Attachable (Reusable) to suit SAE 100R5 hose SU = Suction tail. ci- Module 2. Series Numbers; denotes the thread form or sealing method (coupling end) and the conguration of the hosetail. E.g.; series code #51 denotes a BSPP swivel nut female in a swept 90° conguration, series code #29 denotes a JIC female swivel nut in a compact 90° conguration. Please refer to the following “Series Codes and Descriptions” for further information regarding coupling ends and congurations. Module 3. Coupling end size; denotes the size of the thread form or sealing method of the hosetail. Sizes are expressed as follows; English/American threads; expressed in 1/16th inch increments denoting the key diameter. For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”. Metric threads; expressed in millimetres with prex M, denoting the key diameter. For example; M10 = 10mm O.D. thread. Flanges; express the nominal size of the ange head. Nominal sizing refers to the maximum 7 internal bore. For example a 12 ange head would have a maximum internal bore of 12/16 = 3/4”. Please refer technical section for further information regarding coupling ends, thread forms and sealing methods. Module 4. Hosetail outside diameter; denotes both the nominal O.D. of the hosetail and the I.D of the hose it would suit. Sizes are expressed in 1/16th inch increments. For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

8-3 INFORMATION - PUSH-ON COUPLINGS SE PART NUMBERING SYSTEM – EXAMPLES CODE 01 Part number: P05-1412 02 Complete desription: 7/8” JIC swivel nut female 03 x 3/4” hose tail, straight push-on coupling. 04 05 P 05 - 14 12 06 07 Module 1. Prefix letter Module 4. Hosetail O.D. 08 “P” for push-on “12” for 12/16ths = 3/4” 09 10 Module 2. Series code Module 3. Coupling end size 11 “05” for JIC swivel nut “14” for 14/16ths = 7/8” 110 12 female, straight coupling 13 13R Part number: P60-0808 133 135 Complete desription: 1/2” BSPP swivel nut 14 female x 1/2” hose tail, swept 45° push-on 15 coupling. 16 17 7 P 60 - 08 08 18 19 Module 1. Prefix letter Module 4. Hosetail O.D. 20 “P” for push-on “08” for 8/16ths = 1/2” 21 22 225 226 23 236 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 39N 39F 40 S40N 41 42 43 44 45 456 46 465 466 47 48 49 50 Module 2. Series code Module 3. Coupling end size “60” for BSPP swivel nut “08” for 8/16ths = 1/2” female, swept 45° coupling Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

8-4 INFORMATION SERIES CODES AND DESCRIPTIONS - HOSETAILS CODE DESCRIPTION CODE DESCRIPTION 01 BSP PARALLEL SWIVEL NUT FEMALE 02 BSP PARALLEL SWIVEL NUT FEMALE FLATFACE 51 BSPP SWIVEL NUT FEMALE 90° SWEPT BEND 03 SAE SWIVEL NUT FEMALE 04 JIC SOLID (FIXED) FEMALE 52 ORFS SWIVEL NUT FEMALE 90° SWEPT BEND 05 JIC SWIVEL NUT FEMALE 06 BSPT SOLID (FIXED) FEMALE 53 METRIC ISO/GAZ SWIVEL NUT FEMALE 90° SWEPT BEND 07 NPSM SWIVEL NUT FEMALE 08 BSP PARALLEL SOLID (FIXED) FEMALE 54 SAE CODE 62 FLANGE 60° SWEPT BEND 09 SAE MALE 10 SAE INVERTED FLARE MALE 545 CAT XT5 FLANGE 60° SWEPT BEND 11 NPTF SOLID (FIXED) FEMALE 110 SAE CODE 61 FLANGE 110° SWEPT BEND 55 JIC SWIVEL NUT FEMALE 90° SWEPT BEND 12 BSP PARALLEL MALE 13 ORFS SWIVEL NUT FEMALE 56 ORFS SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 13R ORFS SWIVEL NUT FEMALE, SHORT STEM 133 ORFS SWIVEL NUT FEMALE 30° SWEPT BEND 57 BSPP SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 135 SAE CODE 61 FLANGE 135° SWEPT BEND 14 BSP TAPER MALE SWIVEL 58 JIC SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 15 BSP TAPER MALE 16 NPTF MALE 59 SAE CODE 61 FLANGE 90° SWEPT BEND 17 METRIC MALE (STUD END) 18 JIC MALE 60 BSPP SWIVEL NUT FEMALE 45° SWEPT BEND 19 UNO MALE SWIVEL 20 UNO MALE 61 SAE CODE 62 FLANGE 90° SWEPT BEND 21 POCLAIN FLANGE 22 SAE CODE 62 FLANGE STRAIGHT 615 CAT XT5 FLANGE 90° SWEPT BEND 225 CAT XT5 FLANGE STRAIGHT 226 O&K SAE CODE 62 FLANGE STRAIGHT 616 O&K SAE CODE 62 FLANGE 90° SWEPT BEND 23 SAE CODE 61 FLANGE STRAIGHT 236 O&K SAE CODE 61 FLANGE STRAIGHT 62 SAE CODE 62 FLANGE 45° SWEPT BEND 24 BSPT MALE SWIVEL 90° 25 BSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT 625 CAT XT5 FLANGE 45° SWEPT BEND 26 BSPT MALE 90° COMPACT 27 SAE SWIVEL NUT FEMALE 90° COMPACT 626 O&K SAE CODE 62 FLANGE 45° SWEPT BEND 28 JIC MALE SWIVEL 90° COMPACT 29 JIC SWIVEL NUT FEMALE 90° COMPACT 63 ORFS SWIVEL NUT FEMALE 45° SWEPT BEND 30 WATERBLAST SWIVEL NUT FEMALE 31 DIN METRIC 60° CONE MALE STRAIGHT 64 JIC SWIVEL NUT FEMALE 45° SWEPT BEND 32 UNO MALE SWIVEL 90° COMPACT 33 JIC MALE 90° COMPACT 65 MINI-CHECK TEST POINT METRIC FEMALE/SPIGOT 34 JIS (KOMATSU) METRIC MALE 35 JIS 30° FLARE (MITSUBISHI) MALE 66 SAE CODE 61 FLANGE 60° SWEPT BEND 36 BSP TAPER MALE 45° 37 SAE SWIVEL NUT FEMALE 45° SWEPT BEND 67 SAE CODE 61 FLANGE 22.5° SWEPT BEND 38 BANJO 39 POCLAIN FLANGE 674 SAE CODE 62 FLANGE 22.5° SWEPT BEND 39N POCLAIN FLANGE 90° 39F POCLAIN FLANGE 45° 675 CAT XT5 FLANGE 22.5° SWEPT BEND 40 ORFS MALE S40N ORFS MALE 90° SWEPT BEND 68 SAE CODE 61 FLANGE 45° SWEPT BEND 41 SAE SWIVEL NUT FEMALE 90° SWEPT BEND 42 SAE INVERTED FLARE MALE 45° SWEPT BEND 69 SAE CODE 61 FLANGE 67.5° SWEPT BEND 43 SAE INVERTED FLARE MALE 90 SWEPT BEND 44 KOBELCO METRIC MALE 695 CAT XT5 FLANGE 67.5° SWEPT BEND 45 SAE CODE 61 FLANGE 30° SWEPT BEND 456 O&K SAE CODE 61 FLANGE 30° SWEPT BEND 70 JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 46 SAE CODE 62 FLANGE 30° SWEPT BEND 465 CAT XT5 FLANGE 30° SWEPT BEND 71 JIS ( KOMATSU ) FLANGE STRAIGHT 466 O&K SAE CODE 62 FLANGE 30° SWEPT BEND 47 FRENCH GAZ METRIC MALE 72 JIS ( KOMATSU ) FLANGE 90° SWEPT BEND 48 JIS ( KOMATSU ) METRIC MALE 49 STAPLELOCK FEMALE 73 JIS ( KOMATSU ) FLANGE 45° SWEPT BEND 50 STAPLELOCK MALE 74 FRENCH GAZ METRIC SWIVEL NUT FEMALE 75 JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALE 76 DIN METRIC 60° CONE SWIVEL NUT FEMALE 77 METRIC GLOBESEAL SWIVEL NUT FEMALE 78 HEAVY DIN METRIC MALE 79 HEAVY DIN METRIC SWIVEL NUT FEMALE 80 LIGHT DIN METRIC MALE 81 LIGHT DIN METRIC SWIVEL NUT FEMALE 82 METRIC STANDPIPE 83 HEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 84 HEAVY DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND 85 HEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACT 86 LIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 87 LIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND 88 LIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACT 89 JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 90 HOSE JOINER 91 JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEM. 90° SWEPT BEND 92 IMPERIAL STANDPIPE 93 METRIC 90° STANDPIPE 94 SAE IMPERIAL TUBE CONNECTOR 95 DIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 96 LIFESAVER 97 WEO (CEJN) STRAIGHT STANDPIPE 109 METRIC 45O FLARE BULKHEAD 131 CHINESE FLAT FACE STRAIGHT FEMALE SUFFIX CODES FOR SERIES CODES N NINETY DEGREE e.g. S40N F FORTY FIVE DEGREE e.g. S40F S SWIVEL MALE e.g. SI8S K COMPACT BLOCK 45° e.g. S64K, S60K C CYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01C H HEXAGONAL BAR TAIL STYLE e.g. S05H SUFFIX CODES FOR PART NUMBERS X EXTENDED DROP LENGTH IN MM e.g S615-1616-X132 TORS 2010 www.hydraulink.com PREFIX CODES FOR SERIES GS GATES GLOBAL SPIRAL NON-SKIVE e.g. GS01-2020 GSM GATES GLOBAL SPIRAL MAXIMUM NON-SKIVE e.g. GSM01-3232 Copyright © HYDRAULINK FLUID CONNECTORS 2010 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

8-5 PUSH-ON COUPLINGS INDEX BSP TAPER BSPT MALE STRAIGHT P15 Page 8 - 7 BSP PARALLEL BSP FEMALE STRAIGHT BSP FEMALE 90° ELBOW BSP FEMALE 90° ELBOW P01 P25 P51 Page 8 - 7 Page 8 - 8 Page 8 - 8 NPT NPTF MALE STRAIGHT P16 Page 8 - 8 JIC JIC MALE STRAIGHT JIC FEMALE STRAIGHT JIC FEMALE 90° ELBOW JIC FEMALE 90° ELBOW P18 P05 P29 P55 Page 8 - 9 Page 8 - 9 Page 8 - 10 Page 8 - 10

8-6 PUSH-ON COUPLINGS INDEX SAE SAE MALE STRAIGHT SAE FEMALE STRAIGHT P09 P03 Page 8 - 11 Page 8 - 11 HOSE JOINER HOSE JOINER STRAIGHT P90 Page 8 - 11 BRAZE SOCKET IMPERIAL BRAZE SOCKET P96 Page 8 - 12

8-7 PUSH-ON COUPLINGS BSP TAPER P15 BSPT MALE STRAIGHT BSP TAPERED MALE STRAIGHT Part Number BSPT Male Hose I.D inches Hose I.D (mm) Dash size Hex A/F (E) Cutoff - C Thread (T) P15-0204 1/4 6.4 04 16 18 P15-0404 1/8-28 1/4 6.4 04 16 20 P15-0406 1/4-19 3/8 9.5 06 16 23 P15-0604 1/4-19 1/4 6.4 04 19 18 P15-0606 3/8-19 3/8 9.5 06 19 21 P15-0608 3/8-19 1/2 12.7 08 19 21 P15-0806 3/8-19 3/8 9.5 06 22 27 P15-0808 1/2-14 1/2 12.7 08 22 27 P15-1212 1/2-14 3/4 19 12 32 32 3/4-14 BSP PARALLEL P01 BSP FEMALE STRAIGHT BSP 60° CONE FEMALE SWIVEL NUT STRAIGHT Part Number BSPP Female Hose I.D inches Hose I.D (mm) Dash size Hex A/F (E) Cutoff - C Thread (T) P01-0204 04 14 14 P01-0404 1/8-28 1/4 6.4 04 19 14 P01-0406 1/4-19 1/4 6.4 06 19 14 P01-0604 1/4-19 3/8 9.5 04 22 16 P01-0606 3/8-19 1/4 6.4 06 22 16 P01-0608 3/8-19 3/8 9.5 08 22 17 P01-0806 3/8-19 1/2 12.7 06 27 18 P01-0808 1/2-14 3/8 9.5 08 27 19 P01-0810 1/2-14 1/2 12.7 10 27 19 P01-1010 1/2-14 5/8 15.9 10 28 18 P01-1212 5/8-14 5/8 15.9 12 32 21 3/4-14 3/4 19

8-8 PUSH-ON COUPLINGS BSP PARALLEL P25 BSP FEMALE 90° ELBOW BSP 60° CONE FEMALE SWIVEL NUT 90° ELBOW COMPACT Part Number BSPP Hose I.D Hose I.D Dash size Hex A/F (E) Hex A/F (E1) Drop (H) Cutoff - C Female inches (mm) P25-0404 Thread (T) P25-0606 1/4 6.4 04 19 14 23 11 P25-0808 1/4-19 3/8 9.5 06 22 19 27 15 P25-1212 3/8-19 1/2 12.7 08 27 22 30 18 1/2-14 3/4 19 12 32 27 34 21 3/4-14 BSP PARALLEL P51 BSP FEMALE 90° ELBOW BSP 60° CONE FEMALE SWIVEL NUT 90° ELBOW Part Number BSPP Female Hose I.D Hose I.D (mm) Dash size Hex A/F (E) Drop (H) Cutoff - C Thread (T) inches P51-0404 6.4 04 19 31 21 P51-0606 1/4-19 1/4 9.5 06 22 37 26 P51-0808 3/8-19 3/8 12.7 08 27 45 31 P51-1212 1/2-14 1/2 19 12 32 58 45 3/4-14 3/4 NPT NPTF Male Hose I.D inches Hose I.D (mm) Dash size Hex A/F (E) Cutoff - C P16 Thread (T) 1/4 6.4 04 16 20 NPTF MALE STRAIGHT 1/4-18 3/8 9.5 06 19 23 NPTF MALE 30° CONE 3/8-18 1/2 12.7 08 22 27 1/2-14 Part Number P16-0404 P16-0606 P16-0808

8-9 PUSH-ON COUPLINGS JIC P18 JIC MALE STRAIGHT JIC 37° FLARE MALE STRAIGHT Part Number JIC Male Thread Hose I.D inches Hose I.D (mm) Dash size Hex A/F (H) Cutoff - C (T) P18-0704 04 16 21 P18-0804 7/16-20 1/4 6.4 04 16 21 P18-0904 1/2-20 1/4 6.4 04 16 21 P18-0906 9/16-18 1/4 6.4 06 16 21 P18-1206 9/16-18 3/8 9.5 06 22 25 P18-1208 3/4-16 3/8 9.5 08 22 25 P18-1408 3/4-16 1/2 12.7 08 25 30 P18-1712 7/8-14 1/2 12.7 12 29 34 1.1/16-12 3/4 19 JIC P05 JIC FEMALE STRAIGHT JIC 37° FLARE FEMALE SWIVEL NUT STRAIGHT Part Number JIC Female Hose I.D inches Hose I.D (mm) Dash size Hex A/F (E) Cutoff - C Thread (T) P05-0704 1/4 6.4 04 15 10 P05-0804 7/16 - 20 1/4 6.4 04 17 12 P05-0904 1/2 - 20 1/4 6.4 04 19 12 P05-0906 9/16-18 3/8 9.5 06 19 12 P05-1206 9/16-18 3/8 9.5 06 24 14 P05-1208 3/4-16 1/2 12.7 08 24 14 P05-1408 3/4-16 1/2 12.7 08 27 15 P05-1410 7/8-14 5/8 15.9 10 27 15 P05-1712 7/8-14 3/4 19 12 32 17 1.1/16-12

8 - 10 PUSH-ON COUPLINGS JIC P29 JIC FEMALE 90° ELBOW JIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOW COMPACT Part Number JIC Female Hose I.D Hose I.D Dash size Hex A/F (E) Hex A/F (E1) Drop (H) Cutoff - C Thread (T) inches (mm) P29-0704 04 15 14 19 14 P29-0804 7/16-20 1/4 6.4 04 16 14 21 14 P29-0904 1/2-20 1/4 6.4 04 19 14 21 14 P29-0906 9/16-18 1/4 6.4 06 19 14 21 15 P29-1206 9/16-18 3/8 9.5 06 24 19 27 20 P29-1208 3/4-16 3/8 9.5 08 24 19 27 19 P29-1408 3/4-16 1/2 12.7 08 27 22 28 19 P29-1712 7/8-14 1/2 12.7 12 32 27 36 27 1.1/16-12 3/4 19 JIC P55 JIC FEMALE 90° ELBOW JIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOW Part Number JIC Female Hose I.D Hose I.D (mm) Dash size Hex A/F (E) Drop - H Cutoff - C Thread (T) inches P55-0704 6.4 04 15 28 21 P55-0804 7/16-20 1/4 6.4 04 17 28 21 P55-0906 1/2-20 1/4 9.5 06 19 36 26 P55-1208 9/16-18 3/8 12.7 08 24 42 31 P55-1408 3/4-16 1/2 12.7 08 27 43 31 P55-1712 7/8-14 1/2 19 12 32 54 43 1.1/16-12 3/4

8 - 11 PUSH-ON COUPLINGS SAE P09 SAE MALE STRAIGHT SAE 45° FLARE MALE STRAIGHT Part Number SAE Male Hose I.D inches Hose I.D (mm) Dash size Hex A/F (E) Cutoff - C P09-1006 Thread (T) 3/8 9.5 06 17 22 5/8 - 18 SAE P03 SAE FEMALE STRAIGHT SAE 45° FLARE FEMALE SWIVEL NUT STRAIGHT Part Number SAE Female Hose I.D inches Hose I.D (mm) Dash size Hex A/F (E) Cutoff - C Thread (T) P03-1006 06 19 13 P03-1710 5/8 - 18 3/8 9.5 10 32 17 P03-1712 1.1/16 - 14 5/8 15.9 12 32 17 1.1/16 - 14 3/4 19 HOSE JOINER P90 HOSE JOINER STRAIGHT Part Number Hose I.D inches Hose I.D (mm) Dash size Cutoff - C P90-0404 1/4 6.4 04 5 P90-0606 3/8 9.5 06 5 P90-0808 1/2 12.7 08 6 P90-1010 5/8 15.9 10 5 P90-1212 3/4 19 12 5

8 - 12 PUSH-ON COUPLINGS BRAZE SOCKET P96 IMPERIAL BRAZE SOCKET IMPERIAL TUBE (LIFESAVER) BRAZE SOCKET STRAIGHT Part Number Socket I.D Hose I.D Hose I.D (mm) Dash size O.D mm Cutoff - C inches (Inches) P96-0404 6.4 04 13 7 P96-0606 1/4 1/4 9.5 06 16 7 P96-0808 3/8 3/8 12.7 08 19 9 P96-1010 1/2 1/2 15.9 10 25 10 P96-1212 5/8 5/8 19 12 25 10 3/4 3/4

SECTION 9 R5 FIELD ATTACHABLES 16 PRODUCT CATALOGUE 2019

9-1 PAP 08 TheT berb INIFNOFROMRMATAITOINON- R- 5R5FIFEILEDLDATATTATCAHCAHBALBELSES MoMd GEGNEENREARLAILNIFNOFROMRAMTAIOTINON MoMd TheThHeydHryadurlainuklinraknrgaengoef hoof sheosceoucpoluinpglisngasreaarevaaivlaabilaebilnetihnretheremeaminasinersieesri;eSsw; Sawgea,gFei,eFldieAldttaActthaacbhlaeble MoMd (oft(eonfterenfererrfedrretod atos aresurseaubslaeb) laen) danPdusPhu-sohn-.on. TheThRe5R5eldealdttaactthaacbhlaebslersieesriecsoucpoluinpglinisgaissapescpieaclisiaelidsetydpteypoef oefldealdttaactthaacbhlaeb, ldee, sdiegsniegdnefodrfuosreusweithwith GaGteasteCs5C5, C,5CD5aDndanCd5CM5hMosheosse(SsA(SEA1E001R005R).5T).heThheosheotsaeiltaisilsisupspulpiepdliecdomcopmleptelewteithwiftehrrfuelrerutloe to enseunrseucreomcopmatpibaitlitbyiliotyf hoof sheotsaeiltainl danfedrrfuelreru. le. NONTOET: EP:lePalseeasceonctoanctaHctydHryadurlainuklinfokrffourrtfhuertrhdeer tdaeiltsaailsndanadvaaivlaabilialitbyiliotyf hoof sheosceoucpoluinpglisngtos stouist uGitaGteastes C5CE5hEosheo.se. HydHryadurlainuklinthkrethardeafodrmfosrmasndansdeasleinaglinmgemtheotdhsodasreamreamnuafnaucftaucretudretod tthoethrelerevlaenvtainteinrnteartnioantiaolnsatlasnt-an- darddasrdwshwerheeareppalpicpalibclaeb. leA.ll Adlilmdeimnseinosnisonsshoswhonwanreanreomnoinmailn, aln, dansdubsjuebcjtetcot ctohacnhgaengdeuedutoe otongoonignoging propdruocdtudcet vdeelvoeplmopemnte. nFt.orFcorritcicraitilcaapl palpicpalitcioantiso,npsl,epalseeasceonctoanctaHctydHryadurlainuklintok ctoncornmrdmimdeimnseinosniso.ns. HydHryadurlainuklinFkluFidluCidoCnnoencnteocrstoLrstdL. trde.sreersveersvethsethrieghritgthot dtoisdcoisnctoinnutien,uoer, toor atoltearlttehrethdeesdiegsniganndansdpescpie-ci- catcioantioonf aonf yanpyropdruocdtulcisttelisdteindtihnisthcisatcaalotagluoeg.ue. MoMd 88 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

9-2 ble INFORMATION - R5 FIELD ATTACHABLES with PART NUMBERING SYSTEM – R5 FIELD ATTACHABLE COUPLINGS s - The Hydraulink part numbering system is a concise product description in coded form. The part num- g ber consists of four modules as follows: i- Module 1. Prex letter; denotes coupling type. 8 S = Swage F = Field Attachable (Reusable) P = Push-on R5 = Field Attachable (Reusable) to suit SAE 100R5 hose SU = Suction tail. Module 2. Series Numbers; denotes the thread form or sealing method (coupling end) and the conguration of the hosetail. E.g.; series code #51 denotes a BSPP swivel nut female in a swept 90° conguration, series code #29 denotes a JIC female swivel nut in a compact 90° conguration. Please refer to the following “Series Codes and Descriptions” for further information regarding coupling ends and congurations. Module 3. Coupling end size; denotes the size of the thread form or sealing method of the hosetail. Sizes are expressed as follows; English/American threads; expressed in 1/16th inch increments denoting the key diameter. For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”. Metric threads; expressed in millimetres with prex M, denoting the key diameter. For example; M10 = 10mm O.D. thread. Flanges; express the nominal size of the ange head. Nominal sizing refers to the maximum internal bore. For example a 12 ange head would have a maximum internal bore of 12/16 = 3/4”. Please refer technical section for further information regarding coupling ends, thread forms and sealing methods. Module 4. Hosetail outside diameter; denotes both the nominal O.D. of the hosetail and the I.D of the hose it would suit. Sizes are expressed in 1/16th inch increments. For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

9-3 08 SE INFIONRFMORAMTIAOTNIO- NR5- RFI5EFLIDELADTTAATCTHAACBHLAEBSLES CODE 01 PARPTANRUTMNBUEMRBINEGRISNYGSSTYESMT–EMR5–FRIE5LFDIEALTDTAATCTHAACBHLAEBCLOEUCPOLUINPGLSINGS 02 03 Part nPuamrtbneurm: Rb5e0r:3-R1500036-1006 04 05 CompCleotmepdlesteripdteisornip: t5i/o8n”:S5A/8E” sSwAivEesl wnuivtel nut 06 femalfeemx haolesex htaoilsteotsauilito3/s8u”itn3o/m8”innaolmboinrael SbAorEe SAE 07 100R510h0oRs5e h(toruse b(toruree 5b/o1r6e”)5,/s1t6ra”)i,gshtraeigldht eld 08 attachaattbalechcaobuleplicnogu.pling. 09 10 R5 R035 -0310- 1006 06 11 110 ModuMleo1d.uPlere1f.ixPlreetftiexrletter ModuMleo4d.uHleos4e. tHaoilsOet.Dai.l O.D. 12 “R5” f“oRr 5fi”efldoraftitealdchaatbtalechtoable to “06” fo“0r 66”/1fo6rth6s/1=63th/8s”= 3/8” 13 13R suit SsAuEit1S0A0ER510h0oRse5 hose N.B. SNiz.Be.mSaiztechmesatnchoemsinnaolminal 133 internianltedrianmaledteiarmoef theorsoef hose 135 ModuMleo2d.uSleer2ie. sSecroiedse code 14 “03” fo“0r 3S”AfoErsSwAivEesl wnuivtel nut ModuMleo3d.uCleou3.pClinogupelnindgseizned size 15 femalefe,mstaraleig, hstrcaoiguhptlicnogupling “10” fo“1r 01”0f/o1r61th0s/1=65th/8s”= 5/8” 16 17 Part nPuamrtbneurm: Rb5e5r:5-R1525058-1208 18 19 CompCleotmepdlesteripdteisornip: t3i/o4n”:J3IC/4s” wJIiCvesl wnuivtel nut 20 femalfeemx haolesex htaoilsteotsauilito1/s2u”itn1o/m2”innaolmboinrael SbAorEe SAE 21 100R510h0oRs5e h(toruse b(toruree 1b3o/r3e21”)3,/s3w2”e)p, ts9w0e°pt e9l0d° eld 22 attachaattbalechcaobuleplicnogu.pling. 225 226 R5 R55 -5512- 1028 08 23 236 88 ModuMleo1d.uPlere1f.ixPlreetftiexrletter ModuMleo4d.uHleos4e. tHaoilsOet.Dai.l O.D. 24 “R5” f“oRr 5fi”efldoraftitealdchaatbtalechtoable to “08” fo“0r 88”/1fo6rth8s/1=61th/2s”= 1/2” 25 26 suit SsAuEit1S0A0ER510h0oRse5 hose N.B. SNiz.Be.mSaiztechmesatnchoemsinnaolminal 27 internianltedrianmaledteiarmoef theorsoef hose 28 ModuMleo2d.uSleer2ie. sSecroiedse code 29 “55” fo“5r 5S”AfoErsSwAivEesl wnuivtel nut ModuMleo3d.uCleou3.pClinogupelnindgseizned size 30 femalefe,mswaleep, ts9w0e°pcto9u0p°licnogupling “12” fo“1r 21”2f/o1r61th2s/1=63th/4s”= 3/4” 31 32 33 34 35 36 37 38 39 39N 39F 40 S40N 41 42 43 44 45 456 46 465 466 47 48 49 50 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

9-4 GS INFORMATION - R5 FIELD ATTACHABLES SERIES CODES AND DESCRIPTIONS - HOSETAILS CODE DESCRIPTION CODE DESCRIPTION 01 BSP PARALLEL SWIVEL NUT FEMALE 02 BSP PARALLEL SWIVEL NUT FEMALE FLATFACE 51 BSPP SWIVEL NUT FEMALE 90° SWEPT BEND 03 SAE SWIVEL NUT FEMALE 04 JIC SOLID (FIXED) FEMALE 52 ORFS SWIVEL NUT FEMALE 90° SWEPT BEND 05 JIC SWIVEL NUT FEMALE 06 BSPT SOLID (FIXED) FEMALE 53 METRIC ISO/GAZ SWIVEL NUT FEMALE 90° SWEPT BEND 07 NPSM SWIVEL NUT FEMALE 08 BSP PARALLEL SOLID (FIXED) FEMALE 54 SAE CODE 62 FLANGE 60° SWEPT BEND 09 SAE MALE 10 SAE INVERTED FLARE MALE 545 CAT XT5 FLANGE 60° SWEPT BEND 11 NPTF SOLID (FIXED) FEMALE 110 SAE CODE 61 FLANGE 110° SWEPT BEND 55 JIC SWIVEL NUT FEMALE 90° SWEPT BEND 12 BSP PARALLEL MALE 13 ORFS SWIVEL NUT FEMALE 56 ORFS SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 13R ORFS SWIVEL NUT FEMALE, SHORT STEM 133 ORFS SWIVEL NUT FEMALE 30° SWEPT BEND 57 BSPP SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 135 SAE CODE 61 FLANGE 135° SWEPT BEND 14 BSP TAPER MALE SWIVEL 58 JIC SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND 15 BSP TAPER MALE 16 NPTF MALE 59 SAE CODE 61 FLANGE 90° SWEPT BEND 17 METRIC MALE (STUD END) 18 JIC MALE 60 BSPP SWIVEL NUT FEMALE 45° SWEPT BEND 19 UNO MALE SWIVEL 20 UNO MALE 61 SAE CODE 62 FLANGE 90° SWEPT BEND 21 POCLAIN FLANGE 22 SAE CODE 62 FLANGE STRAIGHT 615 CAT XT5 FLANGE 90° SWEPT BEND 225 CAT XT5 FLANGE STRAIGHT 226 O&K SAE CODE 62 FLANGE STRAIGHT 616 O&K SAE CODE 62 FLANGE 90° SWEPT BEND 23 SAE CODE 61 FLANGE STRAIGHT 236 O&K SAE CODE 61 FLANGE STRAIGHT 62 SAE CODE 62 FLANGE 45° SWEPT BEND 24 BSPT MALE SWIVEL 90° 25 BSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT 625 CAT XT5 FLANGE 45° SWEPT BEND 26 BSPT MALE 90° COMPACT 27 SAE SWIVEL NUT FEMALE 90° COMPACT 626 O&K SAE CODE 62 FLANGE 45° SWEPT BEND 28 JIC MALE SWIVEL 90° COMPACT 29 JIC SWIVEL NUT FEMALE 90° COMPACT 63 ORFS SWIVEL NUT FEMALE 45° SWEPT BEND 30 WATERBLAST SWIVEL NUT FEMALE 31 DIN METRIC 60° CONE MALE STRAIGHT 64 JIC SWIVEL NUT FEMALE 45° SWEPT BEND 32 UNO MALE SWIVEL 90° COMPACT 33 JIC MALE 90° COMPACT 65 MINI-CHECK TEST POINT METRIC FEMALE/SPIGOT 34 JIS (KOMATSU) METRIC MALE 35 JIS 30° FLARE (MITSUBISHI) MALE 66 SAE CODE 61 FLANGE 60° SWEPT BEND 36 BSP TAPER MALE 45° 37 SAE SWIVEL NUT FEMALE 45° SWEPT BEND 67 SAE CODE 61 FLANGE 22.5° SWEPT BEND 38 BANJO 39 POCLAIN FLANGE 674 SAE CODE 62 FLANGE 22.5° SWEPT BEND 39N POCLAIN FLANGE 90° 39F POCLAIN FLANGE 45° 675 CAT XT5 FLANGE 22.5° SWEPT BEND 40 ORFS MALE S40N ORFS MALE 90° SWEPT BEND 68 SAE CODE 61 FLANGE 45° SWEPT BEND 41 SAE SWIVEL NUT FEMALE 90° SWEPT BEND 42 SAE INVERTED FLARE MALE 45° SWEPT BEND 69 SAE CODE 61 FLANGE 67.5° SWEPT BEND 43 SAE INVERTED FLARE MALE 90 SWEPT BEND 44 KOBELCO METRIC MALE 695 CAT XT5 FLANGE 67.5° SWEPT BEND 45 SAE CODE 61 FLANGE 30° SWEPT BEND 456 O&K SAE CODE 61 FLANGE 30° SWEPT BEND 70 JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 46 SAE CODE 62 FLANGE 30° SWEPT BEND 465 CAT XT5 FLANGE 30° SWEPT BEND 71 JIS ( KOMATSU ) FLANGE STRAIGHT 466 O&K SAE CODE 62 FLANGE 30° SWEPT BEND 47 FRENCH GAZ METRIC MALE 72 JIS ( KOMATSU ) FLANGE 90° SWEPT BEND 48 JIS ( KOMATSU ) METRIC MALE 49 STAPLELOCK FEMALE 73 JIS ( KOMATSU ) FLANGE 45° SWEPT BEND 50 STAPLELOCK MALE 74 FRENCH GAZ METRIC SWIVEL NUT FEMALE 75 JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALE 76 DIN METRIC 60° CONE SWIVEL NUT FEMALE 77 METRIC GLOBESEAL SWIVEL NUT FEMALE 78 HEAVY DIN METRIC MALE 79 HEAVY DIN METRIC SWIVEL NUT FEMALE 80 LIGHT DIN METRIC MALE 81 LIGHT DIN METRIC SWIVEL NUT FEMALE 82 METRIC STANDPIPE 83 HEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 84 HEAVY DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND 85 HEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACT 86 LIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 87 LIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND 88 LIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACT 89 JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 90 HOSE JOINER 91 JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEM. 90° SWEPT BEND 92 IMPERIAL STANDPIPE 93 METRIC 90° STANDPIPE 94 SAE IMPERIAL TUBE CONNECTOR 95 DIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT BEND 96 LIFESAVER 97 WEO (CEJN) STRAIGHT STANDPIPE SUFFIX CODES FOR SERIES CODES N NINETY DEGREE e.g. S40N 8 F FORTY FIVE DEGREE e.g. S40F S SWIVEL MALE e.g. SI8S K COMPACT BLOCK 45° e.g. S64K, S60K C CYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01C H HEXAGONAL BAR TAIL STYLE e.g. S05H SUFFIX CODES FOR PART NUMBERS GS GATES GLOBAL SPIRAL NON-SKIVE e.g. S66-2020GS PCM GATES SPIRAL SKIVE TYPE e.g. SMS15-24PCM Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

9-5 JIC 08 JIC INFINOFROMRAMTAIOTNIO-NR-5RF5IEFLIEDLADTATTATCAHCAHBALBELSES JIC 08 SAJICE ASASSESMEBMLIBYNLIFNYOSINTRRSMTUARCUTTCIIOOTNNIOSN- SR5 FIELD ATTACHABLES SAE NonN-Sokni-vSekFivieldFiAeltdtaAchttabclheaCbloeuCpolinugpslings SAE EAnSsuESrneEshuMoresBehoLissYecuiIstNscquSutaTsrqReu,aUwreiCth, wTmiItiOhnimNianSlimenadl end SAE “ari“nga”r.ing”. SNcorneS-wSckrfeivwrreufleFerirebulodledAybtotdanyctohohanobtosleehCoinsoeaunpinlaiannntgi-santi- cElnoscukcwrloeicshkeowdsiseireeiscdtcirouentcstuiqonuntialurhneot,islwehitoihsse3mitisnoi3m5mtaolme5nmcdlmeacr lear “ofainriosnfigdi”ne.sbidoedyb.ody. LSicgrheLtwliygfhleutrblyrruilclueabtbreioctdahyteeottnahtieloptiheaocilspeeieaicnnedaatnhneadnftethim-e afelemale tchlorecakthwdreiosafedthdoeirfeftechtreiroufnleerurbnuotkidleyhb,ootshdeeyni,stsh3certnoews5cmtrhemewctlheear otafilipntiseaidcilpeeieibncoteodyitn.hteo ftehrerufleerrbuoledyboindya icnloackcwloicskewise direcdtiroenctuionntilutnhteil htheex hoenxthoen ttahielptieacilpeieacbeutasbtuhtes the Lfeigrrhuftleleyrrbluolbedryibc.oadtey.the tailpiece and the female thread of the ferruke body, then screw the tailpiece into the ferrule body in a clockwise direction until the hex on the tailpiece abuts the ferrule body. 88 8 PleaPslearseeferretfoertrtaointrianignimnganmuaanl ufoarl mfoor rmeodreetadieletadilaesdsaesmsbelmy binlystirnuscttriuocntsio. ns. Please refer to training manual for more detailed assembly instructions. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

9-6 R5 FIELD ATTACHABLE COUPLINGS INDEX JIC JIC FEMALE STRAIGHT JIC FEMALE STRAIGHT JIC FEM. SWEPT 45° JIC FEM. SWEPT 45° FOR R505 R564 FOR C5E C5E Page 9 - 8 R5E05 Page 9 - 9 R5E64 Page 9 - 10 Page 9 - 9 JIC FEMALE 90° ELBOW JIC FEM. SWEPT 90° FOR R555 C5E Page 9 - 10 R5E55 Page 9 - 11 NPTF NPTF MALE STRAIGHT NPTF MALE STRAIGHT R516 FOR C5E Page 9 - 11 R5E16 Page 9 - 12

9-7 R5 FIELD ATTACHABLE COUPLINGS INDEX SAE SAE FEMALE STRAIGHT SAE FEMALE STRAIGHT SAE FEMALE SWEPT 45° SAE FEMALE SWEPT 45° R503 R537 FOR C5E FOR C5E Page 9 - 12 R5E03 Page 9 - 13 R5E37 Page 9 - 12 Page 9 - 13 SAE FEMALE SWEPT 90° SAE FEMALE SWEPT 90° R541 FOR C5E Page 9 - 13 R5E41 Page 9 - 14 INVERTED SAE SAE MALE SWIVEL SAE MALE SWIVEL SAE INVERTED FLARE SAE INVERTED FLARE STRAIGHT STRAIGHT FOR C5E 45° SWEPT 45° SWEPT FOR C5E R510 R5E10 R542 R5E42 Page 9 - 14 Page 9 - 14 Page 9 - 15 Page 9 - 15 SAE MALE SWIVEL SAE MALE SWIVEL SWEPT 90° SWEPT 90° FOR C5E R543 R5E43 Page 9 - 15 Page 9 - 16

9-8 R5 FIELD ATTACHABLE COUPLINGS JIC R505 JIC FEMALE STRAIGHT JIC 37° FLARE FEMALE SWIVEL NUT STRAIGHT Part Number JIC Female Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Hex A/F Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm (E1) R505-0704 R505-0805 inches mm R505-0906 R505-1206 7/16-20 1/4 6.5 3/16 4.8 04 14 14 31 R505-1208 R505-1410 1/2-20 5/16 8 1/4 6.4 05 17.5 17.5 34 R505-1712 R505-2116 9/16-18 3/8 9.5 5/16 8.0 06 19 19 37 R505-2620 R505-3024 3/4-16 3/8 9.5 5/16 8.0 06 22 22 39 R505-4032 3/4-16 1/2 12.7 13/32 10.3 08 22 22 41 7/8-14 5/8 15.9 1/2 12.7 10 27 27 46 1.1/16-12 3/4 19 5/8 15.9 12 32 32 49 1.5/16-12 1 25.4 7/8 22.2 16 38 38 49 1.5/8-12 1.1/4 31.8 1.1/8 28.6 20 51 51 56 1.7/8-12 1.1/2 38.1 1.3/8 34.9 24 57.2 57.2 60.2 2.1/2-12 2 50.8 1.13/16 46 32 73 63.5 69.1

9-9 R5 FIELD ATTACHABLE COUPLINGS JIC R5E05 JIC FEMALE STRAIGHT FOR C5E JIC FEMALE 37° CONE CRIMPED NUT Part Number JIC Female Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Hex A/F Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm (E1) R5E05-0704 R5E05-0805 inches mm R5E05-0906 R5E05-1208 7/16-20 1/4 6.4 3/16 4.8 04 14.3 12.7 27.9 R5E05-1410 R5E05-1712 1/2-20 5/16 8 1/4 6.4 05 17.5 12.7 30.7 R5E05-2116 R5E05-2620 9/16-18 3/8 9.5 5/16 8 06 19 19 30.2 3/4-16 1/2 12.7 13/32 10.3 08 22.2 22.2 36.8 7/8-14 5/8 15.9 1/2 12.7 10 27 27 41.9 1.1/16-12 3/4 19 5/8 15.9 12 31.8 31.8 45.2 1.5/16-12 1 25.4 7/8 22.2 16 38.1 38.1 46.7 1.5/8-12 1.1/4 31.8 1.1/8 28.6 20 50.8 39.7 55.9 JIC R564 JIC FEM. SWEPT 45° JIC 45° SWEPT ELBOW 37° CONE ROLLED NUT Part Number JIC Female Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop - H Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R564-0704 R564-0906 inches mm R564-1208 R564-1410 7/16-20 1/4 6.4 3/16 4.8 04 14.3 8.6 30.5 R564-1712 9/16-18 3/8 9.5 5/16 8 06 17.5 10.4 37.6 3/4-16 1/2 12.7 13/32 10.3 08 22.2 14.2 43.9 7/8-14 5/8 15.9 1/2 12.7 10 25.4 16 53.6 1.1/16-12 3/4 19 5/8 15.9 12 31.8 19.8 63.3

9 - 10 R5 FIELD ATTACHABLE COUPLINGS JIC R5E64 JIC FEM. SWEPT 45° FOR C5E JIC 45° SWEPT ELBOW 37° CONE ROLLED NUT Part Number JIC Female Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop - H Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R5E64-0704 R5E64-0906 inches mm R5E64-1208 R5E64-1410 7/16-20 1/4 6.4 3/16 4.8 04 14.3 8.6 30.5 R5E64-1712 9/16-18 3/8 9.5 5/16 8 06 17.5 10.4 37.6 3/4-16 1/2 12.7 13/32 10.3 08 22.2 14.2 43.9 7/8-14 5/8 15.9 1/2 12.7 10 25.4 16 53.6 1.1/16-12 3/4 19 5/8 15.9 12 31.8 19.8 63.3 JIC R555 JIC FEMALE 90° ELBOW JIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOW Part Number JIC Female Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R555-0704 R555-0906 inches mm R555-1208 R555-1410 7/16-20 1/4 6.5 3/16 4.8 04 14 18 27 R555-1712 R555-0805 9/16-18 3/8 9.5 5/16 8.0 06 18 21 34 R555-2116 3/4-16 1/2 12.7 13/32 10.3 08 22 28 42 7/8-14 5/8 15.9 1/2 12.7 10 25 32 54 1.1/16-12 3/4 19 5/8 15.9 12 32 46 68 1/2-20 5/16 8 1/4 6.4 05 15.9 19.8 31.8 1.5/16-12 1 25.4 7/8 22.2 16 38.1 54.9 70.1

9 - 11 R5 FIELD ATTACHABLE COUPLINGS JIC R5E55 JIC FEM. SWEPT 90° FOR C5E JIC FEMALE 37° CONE CRIMPED NUT Part Number JIC Female Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R5E55-0704 R5E55-0906 inches mm R5E55-1208 R5E55-1410 7/16-20 1/4 6.4 3/16 4.8 04 14.3 17.5 25.4 R5E55-1712 R5E55-2116 9/16-18 3/8 9.5 5/16 8 06 17.5 21.3 34.5 3/4-16 1/2 12.7 13/32 10.3 08 22.2 27.7 39.1 7/8-14 5/8 15.9 1/2 12.7 10 25.4 31.8 48.5 1.1/16-12 3/4 19 5/8 15.9 12 31.8 46 62 1.5/16-12 1 25.4 7/8 22.2 16 38.1 54.9 67.6 NPTF R516 NPTF MALE STRAIGHT NPTF MALE 60° CONE  Part Number BSPT Male Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R516-0204 04 12.7 23.9 R516-0404 inches mm 04 14.3 28.7 R516-0606 06 17.5 31 R516-0808 1/8-27 1/4 6.4 3/16 4.8 08 22.2 40.4 R516-1212 1/4-18 1/4 12 27 42.9 R516-1616 3/8-18 3/8 6.4 3/16 4.8 16 34.9 43.7 1/2-14 1/2 3/4-14 3/4 9.5 5/16 8 1-11.1/2 1 12.7 13/32 10.3 19 5/8 15.9 25.4 7/8 22.2

9 - 12 R5 FIELD ATTACHABLE COUPLINGS NPTF R5E16 NPTF MALE STRAIGHT FOR C5E NPTF MALE 60° CONE SUIT C5E HOSE Part Number BSPT Male Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R5E16-0204 04 12.7 20.6 R5E16-0404 inches mm 04 14.3 26.2 R5E16-0606 06 17.5 26.4 R5E16-0808 1/8-27 1/4 6.4 3/16 4.8 08 22.2 32.8 R5E16-1212 1/4-18 1/4 12 27 36.6 R5E16-1616 3/8-18 3/8 6.4 3/16 4.8 16 34.9 44.2 1/2-14 1/2 3/4-14 3/4 9.5 5/16 8 1-11.1/2 1 12.7 13/32 10.3 19 5/8 15.9 25.4 7/8 22.2 SAE R503 SAE FEMALE STRAIGHT SAE 45° FLARE FEMALE SWIVEL NUT STRAIGHT Part Number SAE Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Hex A/F Cutoff - C Female Hose I.D - Hose I.D - I.D - inches I.D - mm (E1) R503-1006 Thread (T) R503-1712 inches mm 5/8-18 3/8 9.5 5/16 8.0 06 19 19 37 1.1/16-14 3/4 19 5/8 15.9 12 31.8 31.8 49.3 SAE R5E03 SAE FEMALE STRAIGHT FOR C5E SAE FEMALE 45° CONE CRIMPED NUT Part Number SAE Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Hex A/F Cutoff - C Female Hose I.D - Hose I.D - I.D - inches I.D - mm (E1) R5E03-1006 Thread (T) R5E03-1712 inches mm 5/8-18 3/8 9.5 5/16 8 06 19 19 32.5 1.1/16-14 3/4 19 5/8 15.9 12 31.8 31.8 45.7

9 - 13 R5 FIELD ATTACHABLE COUPLINGS SAE R537 SAE FEMALE SWEPT 45° SAE FEMALE SWEPT 45° CRIMPED NUT Part Number SAE Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Female Hose I.D - Hose I.D - I.D - inches I.D - mm R537-1006 Thread (T) R537-1712 inches mm 5/8-18 3/8 9.5 5/16 8 06 19 10.4 37.3 1.1/16-14 3/4 19 5/8 15.9 12 31.8 18.8 68.8 SAE R5E37 SAE FEMALE SWEPT 45° FOR C5E SAE FEMALE SWEPT 45° CRIMPED NUT Part Number SAE Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Female Hose I.D - Hose I.D - I.D - inches I.D - mm R5E37-1006 Thread (T) R5E37-1712 inches mm 5/8-18 3/8 9.5 5/16 8 06 19 10.4 37.6 1.1/16-14 3/4 19 5/8 15.9 12 31.8 19.8 63.3 SAE R541 SAE FEMALE SWEPT 90° SAE FEMALE SWEPT 90° CRIMPED NUT Part Number SAE Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Female Hose I.D - Hose I.D - I.D - inches I.D - mm R541-1006 Thread (T) R541-1712 inches mm 5/8-18 3/8 9.5 5/16 8 06 19 21.3 33.8 1.1/16-14 3/4 19 5/8 15.9 12 31.8 46 67.6

9 - 14 R5 FIELD ATTACHABLE COUPLINGS SAE R5E41 SAE FEMALE SWEPT 90° FOR C5E SAE FEMALE 45° CONE CRIMPED NUT Part Number SAE Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Female Hose I.D - Hose I.D - I.D - inches I.D - mm R5E41-1006 Thread (T) R5E41-1712 inches mm 5/8-18 3/8 9.5 5/16 8 06 19 21.3 34.5 1.1/16-14 3/4 19 5/8 15.9 12 31.8 46 62 INVERTED SAE R510 SAE MALE SWIVEL STRAIGHT SAE MALE 45° INVERTED FLARE SWIVEL STRAIGHT Part Number SAE Male Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Hex A/F Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm (E1) R510-0704 R510-0805 inches mm R510-0806 R510-1006 7/16-20 1/4 6.4 3/16 4.8 04 11.1 11.1 43.7 R510-1208 1/2-20 5/16 8 1/4 6.4 05 12.7 11.1 46.7 1/2-20 3/8 8 1/4 6.4 05 12.7 12.7 41.9 5/8-18 3/8 9.5 5/16 8 06 15.9 12.7 48.5 3/4-16 1/2 12.7 13/32 10.3 08 19 15.9 60.2 INVERTED SAE R5E10 SAE MALE SWIVEL STRAIGHT FOR C5E SAE MALE 45° INVERTED FLARE SWIVEL Part Number SAE Male Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Hex A/F Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm (E1) R5E10-0704 R5E10-0805 inches mm R5E10-0806 R5E10-1006 7/16-20 1/4 6.4 3/16 4.8 04 11.1 12.7 33.8 R5E10-1208 1/2-20 5/16 8 1/4 6.4 05 12.7 12.7 36.8 1/2-20 3/8 9.5 5/16 8 05 12.7 12.7 39.1 5/8-18 3/8 9.5 5/16 8 06 15.9 12.7 47.2 3/4-16 1/2 12.7 13/32 10.3 08 19 17.5 56.9

9 - 15 R5 FIELD ATTACHABLE COUPLINGS INVERTED SAE R542 SAE INVERTED FLARE 45° SWEPT SAE MALE 45° INVERTED FLARE SWIVEL SWEPT 45° Part Number SAE Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Female Hose I.D - Hose I.D - I.D - inches I.D - mm R542-1006 Thread (T) R542-1208 inches mm 5/8-18 3/8 9.5 5/16 8 06 16 23.9 53.1 3/4-16 1/2 08 19 27.7 58.9 12.7 13/32 10.3 INVERTED SAE R5E42 SAE INVERTED FLARE 45° SWEPT FOR C5E SAE MALE 45° INVERTED FLARE SWIVEL SWEPT 45° Part Number SAE Male Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R5E42-1006 R5E42-1208 inches mm 5/8-18 3/8 9.5 5/16 8 06 16 21.3 74.7 3/4-16 1/2 08 19 27.7 82.3 12.7 13/32 10.3 INVERTED SAE R543 SAE MALE SWIVEL SWEPT 90° SAE MALE 45° INVERTED FLARE SWIVEL SWEPT 90° Part Number SAE Male Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R543-0704 R543-0805 inches mm R543-1006 R543-1208 7/16-20 1/4 6.4 3/16 4.8 04 11.1 39.6 37.3 1/2-20 5/16 8 1/4 6.4 05 12.7 42.2 42.2 5/8-18 3/8 9.5 5/16 8 06 15.9 42.9 42.9 3/4-16 1/2 12.7 13/32 10.3 08 19 45.2 45.2

9 - 16 R5 FIELD ATTACHABLE COUPLINGS INVERTED SAE R5E43 SAE MALE SWIVEL SWEPT 90° FOR C5E SAE MALE 45° INVERTED FLARE SWIVEL Part Number SAE Male Nominal Nominal True Hose True Hose Dash size Hex A/F (E) Drop (H) Cutoff - C Thread (T) Hose I.D - Hose I.D - I.D - inches I.D - mm R5E43-0704 R5E43-0805 inches mm R5E43-0806 R5E43-1006 7/16-20 1/4 6.4 3/16 4.8 04 11.1 31.8 33.8 R5E43-1208 1/2-20 5/16 8 1/4 6.4 05 12.7 38.1 37.1 1/2-20 3/8 9.5 5/16 8 05 12.7 38.1 39.1 5/8-18 3/8 9.5 5/16 8 06 15.9 41.4 47.2 3/4-16 1/2 12.7 13/32 10.3 08 19 50.8 56.9

SUCTION HOSE TAILS SECTION 10 PRODUCT CATALOGUE 2019 17

10 - 1 PA INFORMATION - SUCTION HOSETAILS The ber GENERAL INFORMATION Mod The Hydraulink range of hose couplings are available in three main series; Swage, Field Attachable Mod (often referred to as reusable) and Push-on. The SU series hosetail complements the push-on series, providing a non-swage option for larger internal diameter hoses. Typically used on suction and delivery hoses, such as SAE 100R4 or Gates . This simple form of attachment makes the SU series hosetails suitable for a wide range of hoses, including many for industrial or chemical use. Hydraulink thread forms and sealing methods are manufactured to the relevant international stan- dards where applicable. All dimensions shown are nominal, and subject to change due to ongoing product development. For critical applications, please contact Hydraulink to con rm dimensions. Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci - cation of any product listed in this catalogue. Mod Mod Mod 9 Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

10 - 2 ble INFORMATION - SUCTION HOSETAILS ates PART NUMBERING SYSTEM – STEEL SUCTION COUPLINGS by The Hydraulink part numbering system is a concise product description in coded form. The part num- ment ber consists of four modules as follows: - Module 1. Prex letter; denotes coupling type. g S = Swage i- F = Field Attachable (Reusable) P = Push-on R5 = Field Attachable (Reusable) to suit SAE 100R5 hose 9 SU = Suction tail. Module 2. Series Numbers; denotes the thread form or sealing method (coupling end) and the conguration of the hosetail. E.g.; series code #51 denotes a BSPP swivel nut female in a swept 90° conguration, series code #29 denotes a JIC female swivel nut in a compact 90° conguration. Please refer to the following “Series Codes and Descriptions” for further information regarding coupling ends and congurations. Module 3. Coupling end size; denotes the size of the thread form or sealing method of the hosetail. Sizes are expressed as follows; English/American threads; expressed in 1/16th inch increments denoting the key diameter. For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”. Metric threads; expressed in millimetres with prex M, denoting the key diameter. For example; M10 = 10mm O.D. thread. Flanges; express the nominal size of the ange head. Nominal sizing refers to the maximum internal bore. For example a 12 ange head would have a maximum internal bore of 12/16 = 3/4”. Please refer technical section for further information regarding coupling ends, thread forms and sealing methods. Module 4. Hosetail outside diameter; denotes both the nominal O.D. of the hosetail and the I.D of the hose it would suit. Sizes are expressed in 1/16th inch increments. For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”. Module 5. Special conguration; some series of hosetail are only available as SU series. For ease of recognition, these special congurations use the conventional part numbering system with a sufx. For example; SU12-1216-90 denotes a BSP parallel male (#12) size 3/4” (12/16) with a 1” (16/16) hosetail in a compact 90° conguration. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice