AUregular_noprice_all

13 - 4 STEEL PIPE AND TUBE HYDRAULIC TUBE STP IMPERIAL HYDRAULIC TUBE - PLATED SEAMLESS HYDRAULIC LINE TUBE - IMPERIAL O.D. • Working Pressure calculated using a tensile strength of 340MPa (49300psi), at a safety factor of 4:1. •Flow capacity calculated using a fluid velocity of 20ft/sec (6.1m/sec) • Standards: Conforms to specifications of ASTM A179 • NOTE: Working and burst pressures can vary based on tensile strength of material. Part Number O.D - inches O.D - mm Wall Wall Weight - Working Working Flow - l/min thickness - thickness - kg/m Pressure - Pressure - Gauge mm 0.13 bar psi 0.25 STP-0420 1/4 6.35 20 0.91 0.45 280 4060 5.8 STP-0618 0.57 STP-0816 3/8 9.5 18 1.22 0.85 252 3660 14.4 STP-1016 1.77 STP-1214 1/2 12.7 16 1.63 1.14 252 3660 25.4 STP-1610 3.10 STP-1614 5/8 15.9 16 1.63 195 2830 45.4 STP-2010 3/4 19.1 14 2.03 202 2930 65 1 25.4 10 3.25 250 3625 102 1 25.4 14 2.03 148 2147 130 1.1/4 31.8 10 3.25 195 2820 184

13 - 5 STEEL PIPE AND TUBE HYDRAULIC TUBE STP-M METRIC HYDRAULIC TUBE - PLATED SEAMLESS HYDRAULIC LINE TUBE - METRIC O.D. • Working Pressure calculated using a tensile strength of 340MPa (49300psi), at a safety factor of 3:1. •Flow capacity calculated using a fluid velocity of 20ft/sec (6.1m/sec) • Standards: Conforms to specifications of ASTM A179 / DIN 2391/C • NOTE: Working and burst pressures can vary based on tensile strength of material. Part Number O.D - mm Wall thickness - Weight - kg/m Working Working Flow - l/min mm Pressure - bar Pressure - psi 8.6 STP-M810 8 1.0 0.17 245 3550 16.7 STP-M1015 10 1.5 0.31 303 4390 21.8 STP-M1215 12 1.5 0.39 244 3540 34.2 STP-M1420 14 2.0 0.59 286 4150 49.2 STP-M1515 15 1.5 0.50 190 2755 49.2 STP-M1620 16 2.0 0.69 244 3540 76.8 STP-M1815 18 1.5 0.61 155 2250 76.8 STP-M2020 20 2.0 0.89 283 4096 111 STP-M2220 22 2.0 0.99 170 2470 123 STP-M2530 25 3.0 1.63 233 3380

TUBE CLAMPS SECTION 14 PRODUCT CATALOGUE 2019 21

14 - 1 INFORMATION - TUBE CLAMPS GENERAL INFORMATION 1133 The Hydraulink range of tube clamps is available in four main series. For normal mechanical stress applications (up to approximately 200bar line pressure), clamps are available either as single or twin. For high mechanical stress applications (high pressure, ow or impulse) clamps are available either as single heavy duty or extra heavy duty. For all series the clamp halves are identical and incorporate either a knurled or ribbed bore to absorb impact and vibration as well as provide high shear strength in the direction of the tube axis. Clamp halves are typically supplied in polypropylene, but are also available in re-resistant polyamide or aluminium on request. Clamp bolts, top plates and base plates are typically supplied in steel and nished with a silver triva- lent chromium plating and clear sealant to further increase protection against corrosion, but are also available in AISI 316 stainless steel. Please contact Hydraulink for further details regarding alterna- tive mounting systems such as stacking bolts, multiple clamp base plates and track rails. All four series of tube clamp supplied by Hydraulink can be supplied to metric or imperial tube sizes (true O.D.) or to suit schedule 40, 80 or 160 pipe (nominal bore). Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci- cation of any product listed in this catalogue. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice www.hydraulink.com www.hydraulink.com Copyright © HYDRAULINKCoFpLyUriIgDhCt ©ONHNYDECRTAOURLISNK20F1L0UID CONNECTORS 2010

14 - 2 TUBE CLAMPS INDEX SINGLE TUBE CLAMPS SINGLE TUBE CLAMPS CS Page 14 - 3 DOUBLE TUBE CLAMPS DOUBLE TUBE CLAMPS CF Page 14 - 4 HEAVY DUTY SINGLE TUBE CLAMPS HEAVY DUTY SINGLE TUBE CLAMPS CP Page 14 - 5 HEAVY DUTY DOUBLE TUBE CLAMPS HEAVY DUTY DOUBLE TUBE CLAMPS CPD Page 14 - 5

14 - 3 TUBE CLAMPS SINGLE TUBE CLAMPS CS SINGLE TUBE CLAMPS COMPLETE SINGLE CLAMPS WITH POLYPROPYLENE INSERTS • *Nominal bore. • **CS1 series clamps have only 1 bolt. Part Number Internal Nominal Internal L1 - mm L2 - mm L3 - mm L4 - mm L5 - mm L6 - mm L7 - mm Bore - mm Bore- Bore - imperial Schedule Pipe CS2-04C 6.35 1/4 30 37 20 3 28 3 41 CS1-M8C CS2-M8C 8 5/16 30 28 N/A** 3 28 3 32 CS2-06C CS2-M10C 8 5/16 30 37 20 3 28 3 41 CS2-M12C CS2-08C 9.52 3/8 30 37 20 3 28 3 41 CS3-M14C CS3-M15C 10 1/8 30 37 20 3 28 3 41 CS3-10C CS3-H06C 12 30 37 20 3 28 3 41 CS3-M18C CS4-12C 12.7 1/2 30 37 20 3 28 3 41 CS4-M20C CS4-H08C 14 30 43 26 3 33 3 47 CS4-M22C CS4-M23C 15 30 43 26 3 33 3 47 CS4-16C CS5-H12C 16 5/8 30 43 26 3 33 3 47 CS5-M28C CS5-M30C 17.2 3/8 30 43 26 3 33 3 47 CS5-20C CS6-H16C 18 30 43 26 3 33 3 47 CS6-M35C CS6-24C 19 3/4 30 50 33 3 36 3 54 CS6-H20C CS7-28C 20 30 50 33 3 36 3 54 CS6-M45C CS7-H24C 21.3 1/2 30 50 33 3 36 3 54 CS7-32C CS7-M53C 22 7/8 30 50 33 3 36 3 54 CS7-H28C CS8-36C 23 30 50 33 3 36 3 54 25.4 1 30 50 33 3 36 3 54 26.9 3/4 30 57 40 3 44 3 61 28 30 57 40 3 44 3 61 30 30 57 40 3 44 3 61 32 1.1/4 30 57 40 3 44 3 61 33.7 1 30 70 52 3 57 3 73 35 30 70 52 3 57 3 73 38 1.1/2 30 70 52 3 57 3 73 42.4 1.1/4 30 70 52 3 57 3 73 44.5 1.3/4 30 86 66 3 66 3 88 45 30 70 52 3 57 3 73 48.3 1.1/2 30 86 66 3 66 3 88 50.8 2 30 86 66 3 66 3 88 53 30 86 66 3 66 3 88 54 1.3/4 30 86 66 3 66 3 88 57.2 2.1/4 30 121 94 5 93 5 122

14 - 4 TUBE CLAMPS DOUBLE TUBE CLAMPS CF DOUBLE TUBE CLAMPS COMPLETE DOUBLE CLAMPS W. POLYPROPYLENE INSERTS Part Number Internal Nominal Internal L1 - mm L2 - mm L3 - mm L4 - mm L5 - mm L6 - mm L7 - mm Bore - mm Bore- Bore - CF1-04C imperial CF1-M8C Schedule CF1-06C Pipe CF1-M10C CF1-M12C 6.35 1/4 30 36 20 7 27 3 37 CF1-08C CF2-08C 8 5/16 30 36 20 7 27 3 37 CF2-M14C CF2-M15C 9.52 3/8 30 36 20 7 27 3 37 CF2-10C CF2-H06C 10 1/8 30 36 20 7 27 3 37 CF2-M18C CF3-12C 12 30 36 20 7 27 3 37 CF3-M20C CF3-M22C 12.7 1/2 30 36 20 7 27 3 37 CF3-16C CF4-M28C 12.7 1/2 30 54 29 7 27 3 55 CF4-M30C CF5-20C 14 30 54 29 7 27 3 55 CF5-M35C CF5-24C 15 30 54 29 7 27 3 55 CF5-M42C 16 5/8 30 54 29 7 27 3 55 17.2 3/8 30 54 29 7 27 3 55 18 30 54 29 7 27 3 55 19 3/4 30 37 36 7 37 3 70 20 30 37 36 7 37 3 70 22 7/8 30 37 36 7 37 3 70 25.4 1 30 37 36 7 37 3 70 28 30 81 45 7 42 3 85 30 30 81 45 7 42 3 85 32 1 1/4 30 106 56 7 53 3 110 35 30 106 56 7 53 3 110 38 1.1/2 30 106 56 7 53 3 110 42 30 106 56 7 53 3 110

14 - 5 TUBE CLAMPS HEAVY DUTY SINGLE TUBE CLAMPS CP HEAVY DUTY SINGLE TUBE CLAMPS COMPLETE SINGLE CLAMPS W. POLYPROPYLENE INSERTS Part Number Internal Nominal Internal L1 - mm L2 - mm L3 - mm L4 - mm L5 - mm L6 - mm L7 - mm Bore - mm Bore- Bore - CP1S-08C imperial CP1S-10C Schedule CP2S-12C Pipe CP2S-H08C CP2S-16C 12.7 1/2 30 57 33 8 33 8 70 CP2S-H12C CP3S-20C 16 5/8 30 57 33 8 33 8 70 CP3S-H16C CP3S-24C 19 3/4 30 57 33 8 33 8 87 CP3S-H20C CP4S-32C 21.3 1/2 30 57 33 8 33 8 87 CP4S-H32C 25.4 1 30 57 33 8 33 8 87 26.9 3/4 30 57 33 8 33 8 87 32 1.1/4 30 57 33 8 33 8 105 33.7 1 30 57 33 8 33 8 105 38 1.1/2 30 57 33 8 33 8 105 42.4 1.1/4 30 57 33 8 33 8 105 50.8 2 30 57 33 8 33 8 140 60.3 2 30 57 33 8 33 8 140 HEAVY DUTY DOUBLE TUBE CLAMPS CPD HEAVY DUTY DOUBLE TUBE CLAMPS COMPLETE SINGLE CLAMPS W. POLYPROPYLENE INSERTS Part Number Internal Nominal Internal L1 - mm L2 - mm L3 - mm L4 - mm L5 - mm L6 - mm L7 - mm Bore - mm Bore- Bore - CP2D-12C imperial CP2D-16C Schedule CP3D-20C Pipe CP3D-24C CP4D-32C 19 3/4 60 69 45 8 49 8 87 25.4 1 60 69 45 8 49 8 87 32 1.1/4 60 84 60 8 60 8 105 38 1.1/2 60 84 60 8 60 8 105 50.8 2 90 117 91 10 88 10 140

14 - 6 TUBE CLAMPS

SECTION 15 QUICK RELEASE COUPLINGS 22 PRODUCT CATALOGUE 2019

15 - 1 14 INFIONRFMORAMTIAOTNIO- NQU- IQCUKICRKELREEALSEEASCEOUCPOLUIPNLGISNGS GENGEERNAELRIANLFOINRFMOARTMIOANTION QuickQreulieckasrelecoauseplicnoguspalinregspraimreaprirlyimdaersiliygndedsigtoneadllotwo aqluloicwkqaunidckeansdy ceoansnyeccotnionneactniodndaisncdondniseccotnionnection Stan of uidoftraunidsfterar nlinsfeesr.linTehse. inTshtaelliantsiotanllaotfioqnuiockf qreulieckasrelecoauseplicnoguspilningusidinpouwiderposywseter msysstceamnseclimaninealtime inate the netheed ntoeecdlostoecvlaolsveesv,arlveecsh,aregcehaanrgdebaleneddbtlheeedsytshteemsysatsemweallsawsemllinaismmisiinnigmisuinidglosusidwlohsesnwahceonma- com- PRO ponenptoonreantttaocrhamttaecnht misernetmisovremd ovr edtteodr tottethdetosytshteemsy,ssteamvin, gsativminegatinmdereasnodurecseosu. rces. POP AlthouAglthhothueghabthilietyafboirlitsyofmoresqoumicek qreulieckasrelecoauseplicnogusptloingrostatoteroatnadte“saenldf-a“sligenlf-”arleigdnu”crinegdumciencghmaneicahlanical I stressstornesasdojoninaindgjopinainrtgs poaf rtthseosfytshteemsysctaenmbceaanbbeenaebte, nitemtu,sit mbeusntobteedntohtaetdqtuhiackt qreulieckasrelecoauseplicnogusplings STAINL are noatredensoigt ndedsigfonreudsfeoraussceonastaconnt srotatanttiorontautnioionnusnoior nlivseosr wliviveeslsw. ivTehlse. uTsheeouf saecofuaplicnogufpolirnsgufcohr asuch a purpopsuerpisonsoetisrencotmremceonmdmedenadneddwailnl dvowidillavnoyidwaanrryawntayr,roarntsyu,bosresquubesnetqwuaernrtawntayrrcalanitmy .claim. MOU PUS HydraHuylidnrkasuulipnpklysuapwpliydea rwaindgeeraonf gqeuiockf qreulieckasrelecoauseplicnoguspfloinrgms afonrymaapnpylicaaptipolnicsa,taionnds,inanmdainnymcoanygc-ong- uratiounrsaotiof nesndoftyepned. tTyopefu.lTlol tfhuelrlletqhueirreemqueinretsmoefntthseoafpthpelicaaptipolnicathtieonquthicekqreulieckasrelecoauseplicnoguipslibneginisgbeing Flat selectseedlefcotre, dsefover,rsael vqeureasltqiounesswtioilnl sneweidll ntoeebde tcoobnesidceornesdidwerheicdhwmhaicyhinmcaluydien;clude; FL What Wfuhnactiofunnscatiorensreaqrueirreedquoifrethdeocfothueplicnogu?pling? Scre WhatWishthaet isuthideouwidraotewreraqtueirreedq?uired? G WhatWishthaet isytshteemsyswtoermkinwgorpkriensgspures?sure? SCR WhatWarheatthaerevathrieatvioanrsiaitniosnyssitnemsysptreemsspures; shuorwe;hhigohwahrieghthaerespthikees?pikes? WhatWishthaet isaltlohwe aabllloewparbelsespuresdsruorpe adtrorepqautirreedquiorewdraotew? rate? 114414 DoesDthoeescothueplicnogunpelinegd ntoeebde tcoobneneccotnendeocrteddisocor ndniseccotnendeucntedderupnrdeesrspures?sure? What Wuhidatorumideodriamisedbieainisgbuesinegd?used? Is minIismmuminimuuidmlosusidolrosasir oinrcaluirsiinocnlucsrioticnacl?ritical? DoesDthoeescothueplicnogunpelinegd ntoeeindtetorcihnatenrgcehawnitgheewxisthtinegxiustninitgs?units? QuickQreulieckasrelecoauseplicnoguspalinregstyapriceatlylypimcaalnlyumfaacntuurfeadctiunrestdeeinl satenedlannisdhedniswhitehdawsitilhvearstrilivearletnritvachlernot- chro- miummpiluamtingplatnindgcalenadr csleeaalranset atolafnutrtthoefruirnthcererainscereparosteecptrionteactgioaninastgcaoinrsrot sciornr,obsiuotns,obmutessoemriesseariees are also aavlasoilaabvleaiilnabAleISiIn3A1I6SIs3ta1in6lesstasinslteesesl ostreberlaosrsb. rPaslesa. sPelecoansetacot nHtyadcrtaHuylidnrkafuolrinfkurftohrefrudrtehtearilsdeotfails of availaabvleaimlabaltermiaalstearniadlsvanridanvtasroiafnintsteorfnianltesrenaalsl .seals. HydraHuylidnrkatuhlrinekadthfroeramdsfoarnmdssaenadlinsgemalientghomdesthaoredsmaarneumfaacntuurfeadcttuorethdetoretlheevarnetleinvatenrtnianttieornnaaltsiotanna-l stan- dardsdwahrdesrewahpeprelicaapbpleli.caAblled.imAellndsimionesnssihoonws nshaorwe nnoamreinnaol,mainadl,saunbdjecstutbojecchtatongcehadnugeetoduoengtoionnggoing produpcrtoddeuvcetlodpemveelonpt.mFeonrt.crFitoicraclraitpicpalilcaaptipolnicsa,tpiolenas,seplecoansetacot nHtyadcrtaHuylidnrkatuolincokntorcmondimrmendsimionesn.sions. HydraHuylidnrkaFuluinidk FClounidneCcotnonrsecLtodr.sreLstde.rvresetrhveesrigthet troigdhitsctoondtiisncuoen,tionruteo, aolrtetor tahletedrethseigndeasnigdnsapnedcis-peci- cationcaotfioanyofparondyupcrtolidsutecdt linstethdisincathtaislocgautael.ogue. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice www.hydraulink.com www.hydraulink.com Copyright © HYDRAULINKCoFpLyUriIgDhCt ©ONHNYDECRTAOURLISNK20F1L0UID CONNECTORS 2010

15 - 2 QUICK RELEASE COUPLERS INDEX STANDARD SERIES POPPET SEAL POPPET SEAL BALL SEAL COUPLINGS BALL SEAL COUPLINGS QNS QNS - TECHNICAL COUPLINGS COUPLINGS DATA QNV QNV - TECHNICAL Page 15 - 8 Page 15 - 9 Page 15 - 6 DATA Page 15 - 7 POPPET SEAL POPPET SEAL POPPET SEAL POPPET SEAL COUPLINGS COUPLINGS COUPLINGS COUPLINGS QANV QANV - TECHNICAL QHNV QHNV - TECHNICAL Page 15 - 10 DATA Page 15 - 12 DATA Page 15 - 11 Page 15 - 13 AGRICULTURAL SERIES PUSH/PULL POPPET SEAL PUSH/PULL POPPET SEAL POPPET SEAL WITH AGRICULTURAL QPV QPV - TECHNICAL DECOMPRESSION BREAKAWAY Q3CFPV Page 15 - 13 DATA POPPET Q4 Page 15 - 15 Page 15 - 14 Page 15 - 15 AGRICULTURAL DOUBLE BRACKET QSD BREAKAWAY Q3CFPV - TECHNICAL Page 15 - 16 DATA Page 15 - 15

15 - 3 QUICK RELEASE COUPLERS INDEX TRANSPORT SERIES POPPET SEAL POPPET SEAL COUPLINGS COUPLINGS QNZV QNZV - TECHNICAL Page 15 - 16 DATA Page 15 - 16 FLAT FACE SERIES FLAT FACE COUPLINGS FLAT FACE COUPLINGS FLAT FACE COUPLINGS QFFH QFFH - TECHNICAL Q3FFH DATA Page 15 - 17 Page 15 - 19 Page 15 - 20 SCREW LOCK SERIES HYDRAULIC TOOL HYDRAULIC TOOL DUAL LOCK DUAL LOCK QVV QVV - TECHNICAL COUPLINGS COUPLINGS QPVV QPVV - TECHNICAL Page 15 - 22 DATA Page 15 - 23 Page 15 - 21 DATA Page 15 - 21 DUAL LOCK DUAL LOCK QVVS QVVS - TECHNICAL Page 15 - 24 DATA Page 15 - 25

15 - 4 QUICK RELEASE COUPLERS INDEX DIAGNOSTIC SERIES FLAT FACE DIAGNOSTIC FLAT FACE DIAGNOSTIC COUPLINGS COUPLINGS QDF QDF - TECHNICAL Page 15 - 25 DATA Page 15 - 26 TEMA TEMA QUICK RELEASE COUPLINGS TEMA Page 15 - 26 COUPLING REPAIR KITS FLAT FACE MANIFOLD SEAL KIT FOR FASTER COUPLINGS QUICK RELEASE QRK-4BD / 4FI COUPLINGS Page 15 - 27 QSK Page 15 - 27

15 - 5 QUICK RELEASE COUPLERS INDEX COUPLING PROTECTION QNV DUST COVERS QNV DUST COVERS FLAT FACE DUST FLAT FACE DUST QT QT-S COVERS COVERS Page 15 - 28 Page 15 - 29 QTF QTFFH Page 15 - 30 Page 15 - 29 QPVV DUST COVERS QDF DUST COVERS QHNV DUST COVERS QVV / QVVS DUST QTP QTFDF QTH COVERS Page 15 - 30 Page 15 - 31 Page 15 - 31 QTVV Page 15 - 32

15 - 6 QUICK RELEASE COUPLERS STANDARD SERIES QNV POPPET SEAL COUPLINGS INTERCHANGE WITH ISO 7241-1 PART A IN 08 SIZE • Please enquire for other thread forms and sizes. • Overall length when connected is calculated based on both couplings having the same thread form and size. • Recommended for: Agriculture, industrial, construction, earthmoving. • Connection: Connect without pressure - pull back female sleeve and push couplings to connect. Disconnect under pressure not allowed - pull back female sleeve to disconnect. • Latching: Balls latching. • Shut-off system: Poppet valve. Guidevalve with mechanical backstop. • Temperature range: -25°C to +125°C • Standards: 08 (1/2) size only; Interchangeability according to ISO 7241-1 part A • All other sizes; Faster proprietary standard. • Interchangeability with all QNS series couplings to 16 (1) Part Number Base Size Threadform Thread Coupling Coupling O.D Hex Size A/F Inner Length - L1 - D1 (Hex 1) Coupling O.D - D3 QNV-F04 04 BSPPF socket 1/4-19 50.0 27 19 QNV-F06 QNV-F08 06 BSPPF socket 3/8-19 59.5 33 24 QNV-F0812Q QNV-F0814Q 08 BSPPF socket 1/2-14 66.0 38 27 QNV-F12 QNV-F16 08 UNOF socket 3/4-16 66.0 38 27 QNV-F20 QNV-F24 08 UNOF socket 7/8-14 69.5 38 32 QNV-F32 QNV-M04 12 BSPPF socket 3/4-14 82.5 48 34 QNV-M06 QNV-M08 16 BSPPF socket 1-11 100.0 56 41 QNV-M0812Q QNV-M0814Q 20 BSPPF socket 1.1/4-11 115.0 70 50 QNV-M12 QNV-M16 24 BSPPF socket 1.1/2-11 127.5 84 60 QNV-M20 QNV-M24 32 BSPPF socket 2-11 151.0 119 75 QNV-M32 04 BSPPF socket 1/4-19 33.0 21 19 14.1 06 BSPPF socket 3/8-19 39.0 27 24 18.9 08 BSPPF socket 1/2-14 44.0 30 27 20.5 08 UNOF socket 3/4-16 47.0 30 27 20.5 08 UNOF socket 7/8-14 51.0 30 32 20.5 12 BSPPF socket 3/4-14 53.5 38 34 27.9 16 BSPPF socket 1-11 66.0 27 41 18.9 20 BSPPF socket 1.1/4-11 73.0 33 50 44 24 BSPPF socket 1.1/2-11 83.5 66 60 53.4 32 BSPPF socket 2-11 100.0 86.9 75 82

15 - 7 QUICK RELEASE COUPLERS STANDARD SERIES QNV - TECHNICAL DATA POPPET SEAL COUPLINGS INTERCHANGE WITH ISO 7241-1 PART A IN 08 SIZE Part Number Rated Flow Force to Force to Maximum Maximum Minimum BP Minimum BP Fluid Spill - (l/min) connect - N connect - lb WP ml max QNV-F04 WP Connected - QNV-F06 Connected - QNV-F08 bar Connected - Disconnected psi QNV-F0812Q QNV-F0814Q psi - psi QNV-F12 QNV-F16 15 55 12.1 350 5000 20000 20000 0.8 QNV-F20 QNV-F24 50 85 18.7 300 4500 20000 17400 1.3 QNV-F32 QNV-M04 75 80 17.9 300 4500 17400 17400 1.8 QNV-M06 QNV-M08 75 80 17.9 300 4500 17400 17400 1.8 QNV-M0812Q QNV-M0814Q 75 80 17.9 300 4500 17400 17400 1.8 QNV-M12 QNV-M16 150 150 33.7 300 4500 17400 17400 8 QNV-M20 QNV-M24 220 130 28.6 250 3625 14500 14500 13 QNV-M32 340 145 31.9 220 3300 13500 13500 30 450 265 58.4 200 3000 12000 12000 34 1000 250 56.2 150 2250 9000 9000 100 15 55 12.1 350 5000 20000 20000 0.8 50 85 18.7 300 4500 17400 17400 1.3 75 80 17.9 300 4500 17400 17400 1.8 75 80 17.9 300 4500 17400 17400 1.8 75 80 17.9 300 4500 17400 17400 1.8 150 150 33.7 300 4500 17400 17400 8 220 130 28.6 250 3625 14500 14500 13 340 145 31.9 220 3300 13500 13500 30 450 265 58.4 200 3000 12000 12000 34 1000 250 56.2 150 2250 9000 9000 100

15 - 8 QUICK RELEASE COUPLERS STANDARD SERIES QNS BALL SEAL COUPLINGS INTERCHANGE WITH ISO 7241-1 PART A IN 08 SIZE • Please enquire for other thread forms and sizes. For sizes larger than 16 (1) refer to QNV series. • NOTE: Only size 08 (1/2) is interchangeable with ISO 7241-1 part A. • Recommended for: Agriculture, industrial, construction, earthmoving. • Connection: Connect without pressure - pull back female sleeve and push couplings to connect. Disconnect under pressure not allowed - pull back female sleeve to disconnect. • Latching: Balls latching. • Shut-off system: Ball valve. • Temperature range: -25°C to +125°C • Standards: 08 (1/2) size only; Interchangeability according to ISO 7241-1 part A • All other sizes; Interchangeability according to Faster internal standard. Interchangeability with all QNV series couplings (all sizes). Part Number Base Size Threadform Thread Size Coupling Coupling O.D Hex Size A/F Inner Length - L1 - D1 (Hex 1) Coupling O.D - D3 QNS-F04 04 BSPPF socket 1/4-19 50.0 27 19 QNS-F06 59.5 33 24 QNS-F08 06 BSPPF socket 3/8-19 68.0 38 27 QNS-F12 82.5 48 34 QNS-F16 08 BSPPF socket 1/2-14 100.0 56 41 QNS-M04 33.0 21 19 14.1 QNS-M06 12 BSPPF socket 3/4-14 39.0 27 24 18.9 QNS-M08 46.0 30 27 20.5 QNS-M12 16 BSPPF socket 1-11 53.5 38 34 27.9 QNS-M16 66.0 45 41 31.3 04 BSPPF socket 1/4-19 06 BSPPF socket 3/8-19 08 BSPPF socket 1/2-14 12 BSPPF socket 3/4-14 16 BSPPF socket 1-11

15 - 9 QUICK RELEASE COUPLERS STANDARD SERIES QNS - TECHNICAL DATA BALL SEAL COUPLINGS INTERCHANGE WITH ISO 7241-1 PART A IN 08 SIZE Part Number Rated Flow Force to Force to Maximum Maximum Minimum BP Minimum BP Fluid Spill - (l/min) connect - N connect - lb WP ml max QNS-F04 WP Connected - QNS-F06 Connected - QNS-F08 bar Connected - Disconnected psi QNS-F12 QNS-F16 psi - psi QNS-M04 QNS-M06 15 55 12.1 250 3625 14500 20300 0.7 QNS-M08 QNS-M12 30 83 18.3 250 3625 14500 20300 1 QNS-M16 50 89 19.6 200 2900 11600 17400 1.5 80 170 37.4 170 2465 13775 21750 7 140 140 30.8 220 3190 17400 23200 11 15 55 12.1 250 3625 14500 20300 0.7 30 83 18.3 250 3625 14500 20300 1 50 89 19.6 200 2900 12325 17400 1.5 80 170 37.4 170 2465 9860 21750 7 140 140 30.8 220 3190 13050 23200 11

15 - 10 QUICK RELEASE COUPLERS STANDARD SERIES QANV POPPET SEAL COUPLINGS INTERCHANGE ACCORDING TO ISO 7241-1 PART A • Please enquire for other combinations of base size and thread form. • Overall length when connected is calculated based on both couplings having the same thread form and size. • Recommended for: Agricultural applications. • Connection: Connect without pressure - pull back female sleeve and push couplings to connect. Disconnect under pressure not allowed - pull back female sleeve to disconnect. • Latching: Balls latching. • Shut-off system: Poppet valve. Guidevalve with mechanical backstop. • Temperature range: -25°C to +125°C • Standards: Interchangeability according to ISO 7241-1 part A Part Number Base Size Threadform Thread size Coupling Coupling O.D Hex Size A/F Inner Length - L1 - D1 (Hex 1) Coupling O.D - D3 QANV-F04 04 BSPPF socket 1/4-19 47.2 25 49 QANV-F06 57.0 32 22 QANV-F12 06 BSPPF socket 3/8-19 82.5 48 34 QANV-F16 100.0 56 41 QANV-M04 12 BSPPF socket 3/4-14 38.6 21 24 11.8 QANV-M06 39.0 24 32 17.2 QANV-M12 16 BSPPF socket 1-11 55.0 38 34 29 QANV-M16 66.0 45 34 34.3 04 BSPPF socket 1/4-19 06 BSPPF socket 3/8-19 12 BSPPF socket 3/4-14 16 BSPPF socket 1-11

15 - 11 QUICK RELEASE COUPLERS STANDARD SERIES QANV - TECHNICAL DATA POPPET SEAL COUPLINGS INTERCHANGE ACCORDING TO ISO 7241-1 PART A Part Number Rated Flow Force to Force to Maximum Maximum Minimum BP Minimum BP Fluid Spill - (l/min) connect - N connect - lb WP ml max QANV-F04 WP Connected - QANV-F06 Connected - QANV-F12 bar Connected - Disconnected psi QANV-F16 QANV-M04 psi - psi QANV-M06 QANV-M12 9 45 10 500 7500 30000 30000 0.5 QANV-M16 30 80 17.6 300 4500 18000 21000 1.1 180 150 34 300 4500 18000 18000 8 270 180 40 250 3625 14500 14500 13 9 45 10 500 7500 30000 30000 0.5 30 80 17.6 300 4500 24000 21000 1.1 180 150 34 300 4500 18000 18000 8 270 180 40 250 3625 14500 14500 13

15 - 12 QUICK RELEASE COUPLERS STANDARD SERIES QHNV POPPET SEAL COUPLINGS INTERCHANGE ACCORDING TO ISO 7241-1 PART B • Please enquire for other combinations of base size and thread form. • Overall length when connected is calculated based on both couplings having the same thread form and size. • Recommended for: Industrial applications. • Connection: Connect without pressure - pull back female sleeve and push couplings to connect. Disconnect under pressure not allowed - pull back female sleeve to disconnect. • Latching: Balls latching. • Shut-off system: Poppet valve. Guide valve with mechanical backstop. • Temperature range: -25°C to +125°C • Standards: Interchangeability according to ISO 7241-1 part B • Interchangeability with all QBHNV and SQHNV series couplings. Part Number Base Size Threadform Thread size Coupling Coupling O.D Hex Size A/F Inner Length - L1 - D1 (Hex 1) Coupling O.D - D3 QHNV-F04 04 BSPPF socket 1/4-19 56.0 28 19 QHNV-F06 QHNV-F08 06 BSPPF socket 3/8-19 64.0 35 24 QHNV-F08AC QHNV-F12 08 BSPPF socket 1/2-14 71.5 44 30 QHNV-F16 QHNV-M04 08 NPTFF socket 1/2-14 71.5 44 30 QHNV-M06 QHNV-M08 12 BSPPF socket 3/4-14 89.0 52 36 QHNV-M08AC QHNV-M12 16 BSPPF socket 1-11 106.0 62 41 QHNV-M16 04 BSPPF socket 1/4-19 35.0 21 19 14.1 06 BSPPF socket 3/8-19 39.0 24.5 22 19 08 BSPPF socket 1/2-14 44.0 3 27 23.5 08 NPTFF socket 1/2-14 44.0 30 27 23.5 12 BSPPF socket 3/4-14 55.0 38 34 31.5 16 BSPPF socket 1-11 66.0 45 41 37.8

15 - 13 QUICK RELEASE COUPLERS STANDARD SERIES QHNV - TECHNICAL DATA POPPET SEAL COUPLINGS INTERCHANGE ACCORDING TO ISO 7241-1 PART B Part Number Rated Flow Force to Force to Maximum Maximum Minimum BP Minimum BP Fluid Spill - (l/min) connect - N connect - lb WP ml max QHNV-F04 WP Connected - QHNV-F06 Connected - QHNV-F08 bar Connected - Disconnected psi QHNV-F12 QHNV-F16 psi - psi QHNV-M04 QHNV-M06 17 65 14.3 450 6750 27000 30000 1 QHNV-M08 QHNV-M12 50 80 17.6 300 4500 19500 18000 1.5 QHNV-M16 75 92 20.3 350 5250 21000 21000 2.8 190 120 26.4 250 3625 16500 14500 10 270 180 39.6 300 4500 18000 18000 13 17 65 14.3 450 6750 27000 30000 1 50 80 17.6 300 4500 27000 18000 1.5 75 92 20.3 350 5250 22500 21000 2.8 190 120 26.4 250 3625 14500 14500 10 270 180 39.6 300 4500 18000 18000 13 AGRICULTURAL SERIES QPV PUSH/PULL POPPET SEAL INTERCHANGE ACCORDING TO ISO 7241-1 PART A • QPV are only available in 08 (1/2) base size. • Please enquire for thread forms and sizes. • NOTE: Male coupling is base size 08 (1/2) QNV series. QPV series is only female couplings. • Recommended for: Agricultural equipment. • Connection: Connect without pressure - push male coupling to connect. Disconnect under pressure not allowed - pull male coupling to disconnect. • Latching: Balls latching. • Shut-off system: Poppet valve. • Temperature range: -25°C to +125°C • Standards: Interchangeability according to ISO 7241-1 part A standard. Part Number Base Size Threadform Thread size Coupling Coupling O.D Hex Size A/F Length (L1) (D1) (Hex 1) QPV-F08 08 BSPPF socket 1/2-14 66.0 38 27

15 - 14 QUICK RELEASE COUPLERS AGRICULTURAL SERIES QPV - TECHNICAL DATA PUSH/PULL POPPET SEAL INTERCHANGE ACCORDING TO ISO 7241-1 PART A Part Number Rated Flow Force to Force to Maximum Maximum Minimum BP Minimum BP Fluid Spill - QPV-F08 (l/min) connect - N connect - lb WP ml max WP Connected - Connected - bar Connected - Disconnected psi psi - psi 75 160 35 260 3770 15950 21460 2

15 - 15 QUICK RELEASE COUPLERS AGRICULTURAL SERIES Q4 POPPET SEAL WITH DECOMPRESSION POPPET INTERCHANGE ACCORDING TO ISO 7241-1 PART A Part Number Base Size Threadform Thread size Coupling Coupling O.D Hex Size A/F Inner Q4NV-M08 08 Length (L1) (D1) (Hex 1) Coupling O.D - D3 BSPPF socket 1/2-14 44.0 30 27 20.5 AGRICULTURAL SERIES Q3CFPV AGRICULTURAL BREAKAWAY INTERCHANGE ACCORDING TO ISO 7241-1 PART A • Q3CFPV are only available in 08 (1/2) base size. • Please enquire for optional thread forms and sizes. • NOTE: Male coupling is base size 08 (1/2) QNV series. • Recommended for: Agricultural equipment. • Connection: Connect without pressure, or with only male coupling under pressure. • Disconnect under pressure in emergency only. • Latching: Ball lock latching. • Shut-off system: Poppet valve. • Temperature range: -25°C to +125°C. Part Number Base Size Threadform Thread size Coupling Coupling O.D Hex Size A/F Length (L1) (D1) (Hex 1) Q3CFPV-F08 08 BSPPF socket 1/2-14 Q3CFPV-F0822M 107.2 42 27 08 Male metric M22-1.5 110.7 42 32 AGRICULTURAL SERIES Q3CFPV - TECHNICAL DATA AGRICULTURAL BREAKAWAY INTERCHANGE ACCORDING TO ISO 7241-1 PART A Part Number Rated Flow Force to Force to Maximum Maximum Minimum BP Minimum BP Fluid Spill - (l/min) connect - N connect - lb WP ml max Q3CFPV-F08 WP Connected - Q3CFPV-F0822M Connected - bar Connected - Disconnected psi psi - psi 68 220 48 250 3625 14500 15250 1.8 68 220 48 250 3625 14500 15250 1.8

15 - 16 QUICK RELEASE COUPLERS AGRICULTURAL SERIES Suits coupling base size QSD 08 DOUBLE BRACKET MOUNTING BRACKET FOR PUSH/PULL COUPLINGS Part Number QSD-08 TRANSPORT SERIES QNZV POPPET SEAL COUPLINGS PBR INTERCHANGE Part Number Base Size Threadform Thread Size Coupling Coupling Hex Size A/F Length Diameter (Hex 1) QNZV-F16 16 BSPPF socket 1-11 QNZV-M16 108.0 65 46 16 BSPPF socket 1-11 75.0 133 46 TRANSPORT SERIES QNZV - TECHNICAL DATA POPPET SEAL COUPLINGS COUPLINGS SPECIFICALLY DESIGNED FOR AUST/NZ TRANSPORT MARKET Part Number Rated Flow (l/min) Maximum WP Maximum WP Minimum BP Minimum BP Connected - bar Connected - psi Disconnected - psi Connected - psi QNZV-F16 160 230 3335 13340 17200 QNZV-M16 160 230 3335 13340 17200

15 - 17 QUICK RELEASE COUPLERS FLAT FACE SERIES QFFH FLAT FACE COUPLINGS INTERCHANGE ACCORDING TO ISO 16028 • Sizes above 16 are available on request, but are to a proprietary standard not ISO 16028. • Please enquire for other combinations of base size and thread form. • Overall length when connected is calculated based on both couplings having the same thread form and size. • Recommended for: Agriculture, industrial, construction, earthmoving. • Connection: Connect without pressure - push couplings to connect. Disconnect under pressure not allowed - pull back female sleeve to disconnect. • Latching: Balls latching. • Shut-off system: Flat valve (male coupling with double valve). • Temperature range: -25°C to +100°C • Standards: Interchangeability according to ISO 16028. Part Number Base Size Threadform Thread Size Coupling Coupling O.D - Hex Size A/F Length - L1 D1 (Hex 1) QFFH-F04 04 BSPPF socket 1/4-19 QFFH-F06 59 27.0 24 QFFH-F0608 06 BSPPF socket 3/8-19 75 30.0 27 QFFH-F0612Q 79 30 27 QFFH-F08 06 BSPPF socket 1/2-14 79 30 27 QFFH-F0812 81 38.0 34 QFFH-F0814GK 06 UNOF socket 3/4-16 85.0 38.0 34 QFFH-F0814Q 111 38.0 34 QFFH-F0816RK 08 BSPPF socket 1/2-14 81 38.0 34 112 38 32 QFFH-F0817Q 08 BSPPF socket 3/4-14 QFFH-F1012 QFFH-F1017Q 08 JICM bulkhead 7/8-14 QFFH-F12 08 UNOF socket 7/8-14 QFFH-F1216 QFFH-F1217Q 08 ORFSM 1-14 QFFH-F16 Bulkhead QFFH-M04 QFFH-M06 08 UNOF socket 1.1/16 -12 87 38.0 34 QFFH-M0608 92 42 38 QFFH-M0612Q 10 BSPPF socket 3/4 -14 95 42.0 38 QFFH-M08 100 48.0 42 QFFH-M0812 10 UNOF socket 1.1/16 -12 104 48 42 QFFH-M0814GK 104 48 42 QFFH-M0814Q 12 BSPPF socket 3/4 -14 100 55 50 QFFH-M0816RK 49 16.1 24 12 BSPPF socket 1-11 68 19.7 30 QFFH-M0817Q 73 19.7 27 QFFH-M1012 12 UNOF socket 1.1/16-12 72 19.7 27 QFFH-M1017Q 75 24.5 34 16 BSPPF socket 1-11 78 24.5 34 104 24.5 34 04 BSPPF socket 1/4 - 19 76 24.5 34 104 24.5 32 06 BSPPF socket 3/8-19 06 BSPPF socket 1/2-14 06 UNOF socket 3/4-16 08 BSPPF socket 1/2-14 08 BSPPF socket 3/4-14 08 JICM bulkhead 7/8-14 08 UNOF socket 7/8-14 08 ORFSM 1-14 Bulkhead 08 UNOF socket 1.1/16-12 81 24.5 34 91 45 41 10 BSPPF socket 3/4-14 94 27 38 10 UNOF socket 1.1/16-12

15 - 18 QUICK RELEASE COUPLERS Part Number Base Size Threadform Thread Size Coupling Coupling O.D - Hex Size A/F Length - L1 D1 (Hex 1) QFFH-M12 12 BSPPF socket 3/4-14 QFFH-M1216 12 BSPPF socket 1-11 102 29.9 42 QFFH-M1217Q 12 UNOF socket 1.1/16 - 12 102 29.9 42 16 BSPPF socket 1-11 102 29.9 42 QFFH-M16 106 36 55

15 - 19 QUICK RELEASE COUPLERS FLAT FACE SERIES QFFH - TECHNICAL DATA FLAT FACE COUPLINGS INTERCHANGE ACCORDING TO ISO 16028 Part Number ISO Size Rated Flow Force to Force to Maximum Maximum Minimum Minimum Fluid Spill - (l/min) connect - N connect - WP ml max QFFH-F04 lb WP BP BP QFFH-F06 Connected QFFH-F0608 - bar Connected Disconnected Connected QFFH-F0612Q QFFH-F08 - psi - psi - psi QFFH-F0812 QFFH-F0814GK 6.3 25 110 24.7 350 5000 24200 25700 0.006 QFFH-F0814Q QFFH-F0816RK 10 50 150 33.7 350 5000 24200 24200 .008 QFFH-F0817Q QFFH-F1012 12.5 50 150 33.7 350 5000 24200 24200 .008 QFFH-F1017Q QFFH-F12 12.5 50 150 33.7 350 5000 24200 24200 .008 QFFH-F1216 QFFH-F1217Q 12.5 110 210 47.2 350 5000 20000 24200 0.01 QFFH-F16 QFFH-M04 12.5 110 210 47.2 350 5000 20000 24200 0.01 QFFH-M06 QFFH-M0608 12.5 110 210 47.2 350 5000 20000 24200 0.01 QFFH-M0612Q QFFH-M08 12.5 110 210 47.2 350 5000 20000 24200 0.01 QFFH-M0812 QFFH-M0814GK 12.5 110 210 47.2 350 5000 20000 24200 0.01 QFFH-M0814Q QFFH-M0816RK 12.5 110 210 47.2 350 5000 20000 24200 0.01 QFFH-M0817Q QFFH-M1012 16 125 205 46.1 350 5000 20000 20000 0.01 QFFH-M1017Q QFFH-M12 16 125 205 46.1 350 5000 20000 20000 0.01 QFFH-M1216 QFFH-M1217Q 19 160 215 48.3 350 5000 20000 20000 0.01 QFFH-M16 19 160 215 48.3 350 5000 20000 20000 0.01 19 160 215 48.3 350 5000 20000 20000 0.01 25 230 280 62.9 350 5000 20000 24200 0.01 6.3 25 110 24.7 350 5000 20000 25700 0.006 10 50 150 33.7 350 5000 20000 24200 .008 12.5 50 150 33.7 350 5000 20000 24200 .008 12.5 50 150 33.7 350 5000 20000 24200 .008 12.5 110 210 47.2 350 5000 20000 24200 0.01 12.5 110 210 47.2 350 5000 20000 24200 0.01 12.5 110 210 47.2 350 5000 20000 24200 0.01 12.5 110 210 47.2 350 5000 20000 24200 0.01 12.5 110 210 47.2 350 5000 20000 24200 0.01 12.5 110 210 47.2 350 5000 20000 24200 0.01 16 125 205 46.1 350 5000 20000 20000 0.01 16 125 205 46.1 350 5000 20000 20000 0.01 19 160 215 48.3 350 5000 20000 20000 0.01 19 160 215 48.3 350 5000 20000 20000 0.01 19 160 215 48.3 350 5000 20000 20000 0.01 25 230 280 62.9 350 5000 20000 24200 0.01

15 - 20 QUICK RELEASE COUPLERS FLAT FACE SERIES Q3FFH FLAT FACE COUPLINGS INTERCHANGE ACCORDING TO ISO 16028 Part Number Base Size Threadform Thread Size Coupling Coupling O.D Hex Size A/F Inner Length - L1 Q3FFH-F06 06 - D1 (Hex 1) Coupling O.D Q3FFH-F08 08 Q3FFH-F12 12 - D3 Q3FFH-M06 06 Q3FFH-M08 08 BSPPF socket 3/8-19 75 30 27 Q3FFH-M12 12 BSPPF socket 1/2-14 81.3 38 34 BSPPF socket 3/4-14 100 48 42 BSPPF socket 3/8-19 100 30 32 19.7 BSPPF socket 1/2-14 115.7 37 34 24.5 BSPPF socket 3/4-14 128.4 46 42 30

15 - 21 QUICK RELEASE COUPLERS SCREW LOCK SERIES QPVV HYDRAULIC TOOL COUPLINGS INTERCHANGE WITH EUROPE AND US MARKETS • QPVV series are only available in base sizes 04 and 06 (1/4 and 3/8). • Please enquire for further thread forms and sizes. • Connection: Connect with pressure - screw couplings together to connect. • Disconnect with pressure - unscrew couplings to disconnect. • NOTE: Can be connected with pressure in either or both couplings. • Latching: Threaded with safety lock. • Shut-off system: Poppet valve. Interchanges with ball-type hydraulic tool couplings. • Temperature range: -25°C to +125°C • Standards: Faster proprietary standard; interchange with US and European hydraulic tool couplings. Part Number Base Size Threadform Thread Size Coupling Coupling O.D - Hex Size A/F Length - L1 D1 (Hex 1) QPVV-F04L 04 NPTF male boss 1/4-18 QPVV-F06L 63 33 21 QPVV-M04AC 06 NPTF male boss 3/8 - 18 83 36 25 QPVV-M06AC 63 30 27 04 NPTFF socket 1/4-18 83 35 32 06 NPTFF socket 3/8-18 SCREW LOCK SERIES QPVV - TECHNICAL DATA HYDRAULIC TOOL COUPLINGS INTERCHANGE WITH EUROPE AND US MARKETS Part Number Rated Flow (l/min) Maximum WP Maximum WP Minimum BP Minimum BP Connected - bar QPVV-F04L Connected - psi Disconnected - psi Connected - psi QPVV-F06L 15 1030 QPVV-M04AC 20 1000 14935 47850 47850 QPVV-M06AC 15 1030 14500 43500 43500 20 1000 14935 44950 47850 14500 47850 43500

15 - 22 QUICK RELEASE COUPLERS SCREW LOCK SERIES QVV DUAL LOCK FASTER PROPRIETARY STANDARD (INTERCHANGES WITH QVV AND QNV MALES) • For sizes above 16 please refer to QVVS series. • Please enquire for other combinations of base size and thread form. • Overall length when connected is calculated based on both couplings having the same thread form and size. • Recommended for: Agriculture, industrial, construction, earthmoving. • Connection: For QVV male couplings (A); connect or disconnect under pressure. • Latching: Threaded. • Shut-off system: Poppet valve. Guidevalve with mechanical backstop. • Connection: For QNV male couplings (B); connect without pressure - pull back female sleeve and push couplings to connect. Disconnect under pressure not allowed - pull back female sleeve to disconnect. • Latching: Balls latching. • Shut-off system: Poppet valve. Reinforced guidevalve with mechanical backstop. • Temperature range: -25°C to +125°C • Standards: 08 (1/2) size female only; Interchangeability according to ISO 7241-1 part A. All other sizes; Faster proprietary standard. Part Number Base Size Threadform Thread Size Coupling Coupling O.D Hex Size A/F Inner Length - L1 - D1 (Hex 1) Coupling O.D - D3 QVV-F04 04 BSPPF socket 1/4-19 60 27 19 QVV-F06 QVV-F08 06 BSPPF socket 3/8-19 72 34 24 QVV-F12 QVV-F16 08 BSPPF socket 1/2-14 79 38 27 QVV-M04 QVV-M06 12 BSPPF socket 3/4-14 106 50 34 QVV-M08 QVV-M12 16 BSPPF socket 1-11 124 55 41 QVV-M16 04 BSPPF socket 1/4-19 33.0 25.4 19 14.1 06 BSPPF socket 3/8-19 40.5 30.4 24 18.9 08 BSPPF socket 1/2-14 49.0 34 27 20.5 12 BSPPF socket 3/4-14 62.0 43.5 34 27.9 16 BSPPF socket 1-11 70.0 52 41 31.8

15 - 23 QUICK RELEASE COUPLERS SCREW LOCK SERIES QVV - TECHNICAL DATA DUAL LOCK FASTER PROPRIETARY STANDARD Part Number Rated Flow Maximum WP Maximum WP Minimum BP Minimum BP Fluid Spill - ml (l/min) QVV-F04 Connected - bar Connected - psi Disconnected - Connected - psi max QVV-F06 QVV-F08 psi QVV-F12 QVV-F16 18 350 5075 24650 21750 1.5 QVV-M04 QVV-M06 30 300 4350 17400 21750 2 QVV-M08 QVV-M12 45 300 4350 18850 23200 3 QVV-M16 90 250 3625 14500 17400 10 140 230 3625 14210 17400 15 18 350 5075 20300 21750 1.5 30 300 4350 17400 21750 2 45 300 4350 17400 23200 3 90 250 3625 14500 17400 10 140 230 3625 13500 17400 15

15 - 24 QUICK RELEASE COUPLERS SCREW LOCK SERIES QVVS DUAL LOCK FASTER PROPRIETARY STANDARD • Sizes above 20 (1.1/4) are available on request. • Please enquire for other combinations of base size and thread form. • Overall length when connected is calculated based on both couplings having the same thread form and size. • Recommended for: Construction, earthmoving, hydraulic tools. • Connection: Connect with pressure - screw couplings together to connect. Disconnect with pressure - unscrew couplings to disconnect. • NOTE: Can be connected with pressure in either or both couplings. • Latching: Threaded. • Shut-off system: Poppet valve. Reinforced guidevalve with mechanical backstop. • Temperature range: -25°C to +125°C • Standards: Faster proprietary standard. Interchangeability with all QVV series couplings to size 16 (1). Part Number Base Size Threadform Thread Size Coupling Coupling O/D Hex Size A/F Inner Length - L1 - D1 (Hex 1) Coupling O.D - D3 QVVS-F04 04 BSPPF socket 1/4-19 58.0 30 22 QVVS-F06 62.0 40 30 QVVS-F08 06 BSPPF socket 3/8-19 71.0 45 34 QVVS-F12 63.0 55 41 QVVS-F16 08 BSPPF socket 1/2-14 100.0 60 50 QVVS-F20 123.0 80 65 QVVS-M04 12 BSPPF socket 3/4-14 43.0 28 25 14.1 QVVS-M06 48.0 35 30 18.9 QVVS-M08 16 BSPPF socket 1-11 53.0 38 34 20.5 QVVS-M12 63.0 50 46 27.9 QVVS-M16 20 BSPPF socket 1.1/4-11 72.0 55 50 31.3 QVVS-M20 86.0 70 65 43.9 04 BSPPF socket 1/4-19 06 BSPPF socket 3/8-19 08 BSPPF socket 1/2-14 12 BSPPF socket 3/4-14 16 BSPPF socket 1-11 20 BSPPF socket 1.1/4-11

15 - 25 QUICK RELEASE COUPLERS SCREW LOCK SERIES QVVS - TECHNICAL DATA DUAL LOCK FASTER PROPRIETARY STANDARD Part Number Rated Flow Maximum WP Maximum WP Minimum BP Minimum BP Fluid Spill - ml (l/min) QVVS-F04 Connected - bar Connected - psi Disconnected - Connected - psi max QVVS-F06 QVVS-F08 psi QVVS-F12 QVVS-F16 8 800 11600 34800 36250 1 QVVS-F20 QVVS-M04 18 760 11020 36250 33350 1.5 QVVS-M06 QVVS-M08 30 730 10585 31900 31900 2 QVVS-M12 QVVS-M16 45 700 10150 33350 31030 3 QVVS-M20 90 530 7685 32480 28130 10 140 600 8700 26100 29000 15 8 800 11600 34800 36250 1 18 760 11020 42050 33350 1.5 30 730 10585 34510 31900 2 45 700 10150 30740 31030 3 90 530 7685 23200 28130 10 140 600 8700 26100 29000 15 DIAGNOSTIC SERIES QDF FLAT FACE DIAGNOSTIC COUPLINGS INTERCHANGE ACCORDING TO ISO 15171-1 Part Number Base Size Threadform Thread Size Coupling Length - Hex Size A/F (Hex L1 1) QDF-F04AC 04 NPTF socket 1/4-18 QDF-F0409Q 04 UNOF socket 9/16-18 50 21 QDF-M04AC 04 NPTF socket 1/4-18 54 21 QDF-M0409JF 04 JIC Female 9/16-18 40 19 QDF-M0409Q 04 UNOF socket 9/16-18 38 19 37 17

15 - 26 QUICK RELEASE COUPLERS DIAGNOSTIC SERIES QDF - TECHNICAL DATA FLAT FACE DIAGNOSTIC COUPLINGS INTERCHANGE ACCORDING TO ISO 15171-1 Part Number Rated Flow Maximum WP Maximum WP Minimum BP Minimum BP Spillage (ml) (l/min) Connected - bar Connected - psi Disconnected - Connected - psi QDF-F04AC QDF-F0409Q psi QDF-M04AC QDF-M0409JF 2 470 6815 21750 26100 0.01 QDF-M0409Q 2 470 6815 21750 26100 0.01 2 470 6815 27550 26100 0.01 2 470 6815 27550 26100 0.01 2 470 6815 27550 26100 0.01 TEMA TEMA TEMA QUICK RELEASE COUPLINGS POPPET STYLE QUICK RELEASE COUPLING Part Number Base Size Threadform Thread Size - A Coupling Coupling O.D - Hex A/F (CHF) Length - B D TEMA-10010 16 BSPPF socket 1-11 TEMA-10020 16 BSPPF socket 1-11 92 62 48 TEMA-2510 04 BSPPF socket 1/4-19 92 62 45 TEMA-2520 04 BSPPF socket 1/4-19 60 26 21 TEMA-3810 06 BSPPF socket 3/8-19 60 26 21 TEMA-3820 06 BSPPF socket 3/8-19 62 35 24 TEMA-5010 08 BSPPF socket 1/2-14 62 35 24 TEMA-5020 08 BSPPF socket 1/2-14 68 41 33 TEMA-7510 12 BSPPF socket 3/4-14 68 41 30 TEMA-7520 12 BSPPF socket 3/4-14 77 52 38 77 52 38

15 - 27 QUICK RELEASE COUPLERS COUPLING REPAIR KITS QRK-4BD / 4FI FLAT FACE MANIFOLD COUPLINGS COUPLINGS FOR FLAT FACE MANIFOLD (BOBCAT) Part Number Coupling size - in Base Size Standard Q4BD4FH08 1/2 08 ISO 16028 Q4BD4FH12 3/4 12 ISO 16028 QRK-4BD-FFHF08 1/2 08 ISO 16028 QRK-4BD-FFHF12 3/4 12 ISO 16028 QRK-4BD-FFHM06 3/8 06 ISO 16028 QRK-4BD-FFHM08 1/2 08 ISO 16028 QRK-4BD-FFHM12 3/4 12 ISO 16028 QRK-4BD-FFNM06 3/8 06 ISO 16028 QRK-4FIF08 1/2 08 ISO 16028 QRK-4FIM08 1/2 08 ISO 16028 COUPLING REPAIR KITS QSK SEAL KIT FOR FASTER QUICK RELEASE COUPLINGS Part Number Coupling size - in Suits coupling with base Compatible with size QSK-F04N 1/4 NV-VV-VVS QSK-F06N 3/8 04 NV-VV-VVS QSK-F08N 1/2 06 NV-VV-VVS QSK-F12N 3/4 08 NV-VV-VVS QSK-F16N 1 12 NV-VV-VVS QSK-F20N 1 1/4 16 NV-VV-VVS QSK-F24N 1 1/2 20 NV-VV-VVS QSK-F04PVV 1/4 24 QPVV-F04 QSK-F06PVV 3/8 04 QPVV-F06 QSK-M08FH 1/2 06 QFFH-M08 QSK-M12FH 3/4 08 QFFH-M12 12

15 - 28 QUICK RELEASE COUPLERS COUPLING PROTECTION QT QNV DUST COVERS PVC COVERS FOR QNV-QNS SERIES COUPLINGS Part Number QNV Male Size QNV Female Size Colour QT-F04B 04 04 Blue QT-F06B 06 06 Blue QT-F08B 08 08 Blue QT-F08BLK 08 08 Black QT-F08G 08 08 Green QT-F08O 08 08 Orange QT-F08R 08 08 Red QT-F08Y 08 08 Yellow QT-F12B 12 12 Blue QT-F16B 16 16 Blue QT-M04B Blue QT-M06B Blue QT-M08B Blue QT-M08BLK Black QT-M08G Green QT-M08O Orange QT-M08R Red QT-M08Y Yellow QT-M12B Blue QT-M16B Blue

15 - 29 QUICK RELEASE COUPLERS COUPLING PROTECTION QNV Male Size QNV Female Size QT-S 20 20 QNV DUST COVERS 24 24 ALUMINIUM COVERS FOR QNV SERIES COUPLINGS 32 32 Part Number QFFH/Q3FFH Female QT-F20S 04 QT-F24S 08 QT-F32S 12 QT-M20S QT-M24S QT-M32S COUPLING PROTECTION QFFH/Q3FFH Male QTF 04 FLAT FACE DUST COVERS 08 ALUMINIUM COVERS FOR FLAT FACE COUPLINGS 12 Part Number QTFI-F04S QTFI-F08S QTFI-F12S QTFI-M04S QTFI-M08S QTFI-M12S

15 - 30 QUICK RELEASE COUPLERS COUPLING PROTECTION QTFFH FLAT FACE DUST COVERS PVC COVERS FOR FLAT FACE COUPLINGS Part Number QFFH/Q3FFH Male QFFH/Q3FFH Female QTFFH-F04 04 04 QTFFH-F06 06 06 QTFFH-F08 08 08 QTFFH-F12 12 12 QTFFH-F16 16 16 QTFFH-M04 QTFFH-M06 QPVV Female QTFFH-M08 04 QTFFH-M12 06 QTFFH-M16 COUPLING PROTECTION QPVV Male QTP 04 06 QPVV DUST COVERS ALUMINIUM COVERS FOR HYDRAULIC TOOL COUPLINGS • Only available in 04 and 06 (1/4 and 3/8) size. • QTP series covers protect QPVV series couplings from contamination, atmospheric agents and damage to sealing faces and connection threads when disconnected and not in use. Part Number QTP-F04S QTP-F06S QTP-M04S QTP-M06S

15 - 31 QUICK RELEASE COUPLERS COUPLING PROTECTION QDF Male QDF Female QTFDF 04 04 QDF DUST COVERS QHNV Male Size QHNV Female Size PVC COVERS FOR QDF SERIES COUPLINGS 04 06 04 Part Number 08 06 QTFDF-F04 12 08 QTFDF-M04 16 12 16 COUPLING PROTECTION QTH QHNV DUST COVERS PVC COVERS FOR QHNV SERIES COUPLINGS Part Number QTH-F04 QTH-F06 QTH-F08 QTH-F12 QTH-F16 QTH-M04 QTH-M06 QTH-M08 QTH-M12 QTH-M16

15 - 32 QUICK RELEASE COUPLERS COUPLING PROTECTION QVV/QVVS Male QVV/QVVS Female QTVV 04 04 06 06 QVV / QVVS DUST COVERS 08 08 ALUMINIUM COVERS FOR SCREW-LOCK COUPLINGS 12 12 16 16 • Please enquire for QTVV aluminium covers larger than size 20 (1.1/4). • QTVV series covers protect QVV and QVVS series couplings from contamination, atmospheric agents and damage to sealing faces and connection threads when disconnected and not in use. Part Number QTVV-F04S QTVV-F06S QTVV-F08S QTVV-F12S QTVV-F16S QTVV-M04S QTVV-M06S QTVV-M08S QTVV-M12S QTVV-M16S

BALL AND CHECK VALVES SECTION 16 PRODUCT CATALOGUE 2019 23

16 - 1 INFORMATION - BALL AND CHECK VALVES GENERAL INFORMATION 1515 Ball valves supplied by Hydraulink can be used for a wide range of applications. Various options are available subject to the pressure and porting requirements. When specifying or selecting a ball valve for a particular application, the following criteria should be considered; What functions are required of the coupling? What is the uid ow rate required? What size and end type of port thread is required? What are the ambient and uid temperature requirements? What is the system working pressure? What are the variations in system pressure; how high are the spikes? What is the uid or media to be conveyed? Ball valves are typically supplied in supplied in steel and nished with a silver trivalent chromium plating and clear sealant to further increase protection against corrosion, but are also available other material such as AISI 316 stainless steel. In addition to the valves listed, a wide range of options for port connection styles including S.A.E., D.I.N. and A.N.S.I. anges. Please contact Hydraulink for further details of available materials, internal seal, conguration and end type combinations. Check valves (or non-return valves) supplied by Hydraulink are available in various combinations of end type (thread form) and crack pressure. On request, Hydraulink can also supply kits to update the crack pressure of existing check valves. Material is typically steel, nished with a silver trivalent chromium plating and clear sealant to further increase protection against corrosion. Please contact Hydraulink for further details of available materials, crack pressure and end type combinations. Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci- cation of any product listed in this catalogue. Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice www.hydraulink.com www.hydraulink.com Copyright © HYDRAULINKCoFpLyUriIgDhCt ©ONHNYDECRTAOURLISNK20F1L0UID CONNECTORS 2010

16 - 2 BALL VALVES AND CHECK VALVES INDEX LOW PRESSURE BALL VALVES TWO WAY BALL VALVE LOW PRESSURE LPBV Page 16 - 3 BALL VALVES TWO WAY BALL VALVE L-PORTED 3 WAY BALL TWO WAY BALL VALVE BV VALVE REDUCED BORE Page 16 - 3 BV3L BVR Page 16 - 4 Page 16 - 4 CHECK VALVES BSPPF CHECK VALVE CVF Page 16 - 5

16 - 3 BALL VALVES AND CHECK VALVES LOW PRESSURE BALL VALVES LPBV TWO WAY BALL VALVE LOW PRESSURE TWO WAY BALL VALVE LOW PRESSURE PLATED BRASS Part Number BSPTF Female Thread Bore Working Pressure psi Working Pressure Bar (B) LPBV-04 10mm 435 30 LPBV-06 1/4-19 10mm 435 30 LPBV-08 3/8-19 15mm 435 30 LPBV-12 1/2-14 20mm 435 30 LPBV-16 3/4-14 25mm 435 30 LPBV-20 1-11 32mm 360 25 LPBV-24 1.1/4-11 40mm 360 25 LPBV-32 1.1/2-11 50mm 360 25 2-11 BALL VALVES BV TWO WAY BALL VALVE BLOCK TYPE WITH MOUNTING HOLES UP TO -16 • VALVES UP TO AND INCLUDING -16 ARE BLOCK TYPE BODY. • VALVES -20 TO -32 HAVE A FORGED BODY. Part Number BSPP Female Internal Bore - mm Working Pressure Working Pressure Mounting Hole Thread Size - mm BV-04 - bar - psi BV-06 BV-08 1/4-19 6 500 7250 5 BV-12 3/8-19 10 BV-16 1/2-14 13 500 7250 5 BV-20 3/4-14 20 BV-24 1-11 25 500 7250 5 BV-32 1.1/4-11 32 1.1/2-11 38 500 7250 6 2-11 50 500 7250 6 400 5800 n/a 400 5800 n/a 400 5800 n/a

16 - 4 BALL VALVES AND CHECK VALVES BALL VALVES BV3L L-PORTED 3 WAY BALL VALVE BLOCK TYPE WITH MOUNTING HOLES UP TO -16 • VALVES UP TO AND INCLUDING -16 ARE BLOCK TYPE BODY. • VALVES -20 TO -32 HAVE A FORGED BODY. Part Number BSPP Female Internal Bore - mm Working Pressure Working Pressure Mounting Hole Thread Size - mm BV3L-04 - bar - psi BV3L-06 1/4-19 5 BV3L-08 3/8-19 6 400 5800 5 BV3L-12 1/2-14 10 400 5800 5 BV3L-16 3/4-14 13 350 5075 8 BV3L-20 1-11 20 350 5075 8 BV3L-24 1.1/4-11 25 350 5075 8 1.1/2-11 32 400 5800 8 38 400 5800 BALL VALVES BVR TWO WAY BALL VALVE REDUCED BORE FORGED TYPE WITHOUT MOUNTING HOLES Part Number BSPP Female Thread Internal Bore - mm Working Pressure - Working Pressure - bar psi BV-20R 1.1/4-11 25 BV-24R 1.1/2-11 25 350 5075 BV-32R 40 350 5075 2-11 350 5075

16 - 5 BALL VALVES AND CHECK VALVES CHECK VALVES CVF BSPPF CHECK VALVE STEEL CHECK VALVE (5 psi CRACK PRESSURE) Part Number Base Size BSPP Female BSPP Female Overall Length (L) Hex A/F (CH1) Thread (A) Thread (B) CVF-04 04 50 19 CVF-06 06 1/4-19 1/4-19 60 24 CVF-08 08 3/8-19 3/8-19 70 27 CVF-12 12 1/2-14 1/2-14 86 34 CVF-16 16 3/4-14 3/4-14 100 41 1-11 1-11

SECTION 17 ACCESSORIES 24 PRODUCT CATALOGUE 2019

17 - 1 INFORMATION - ACCESSORIES Hos GENERAL INFORMATION WI Hydraulink stock a comprehensive range of accessories, from individual seals for adaptors to spill kits Hos for rapid and convenient containment and disposal of hydraulic oil spills. Various types of protective hose armour are available, to protect and prolong the service life of hose G assemblies whether in conventional or aggressive environments. Some of these armours require clamping in place, and the ranges of clamps to do so are also in this section as well as tables for SAE easy selection of protective hose armour based on hose size. Bolts and washers for S.A.E. anges and a wide variety of seals are among the essentials for new BSP installations or for service work. Also listed are projectile cleaning kits to ensure every assembly SA manufactured is contamination free, and robust threaded plastic caps and plugs to protect those as- semblies from further contamination once assembled. Hos For the mobile service vehicle, workshop or hose shop, Hydraulink supply a standardised bin and racking system detailed in this section, as well as various sizes of spill kit and environmentally re- CLE sponsible organic absorbent to contain either hydraulic oil or general spills. Rep 1166 DOW MAL Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice www.hydraulink.com www.hydraulink.com Copyright © HYDRAULINKCoFpLyUriIgDhCt ©ONHNYDECRTAOURLISNK20F1L0UID CONNECTORS 2010