Simple Steps: Canon Pixma G4210 Setup Guidance - Airprint.us

INSTRUCTIONS FOR HP ENVY 4505 PRINTER HP Envy 4505 is an affordable three-in-one printer designed for small to mid-size home/office printing, scanning, and copying needs. It comes with great features like duplex printing, wireless, wired, USB connectivity options, mobile printing capability, and more. The print quality and speed of this Envy printer are excellent. However, its running cost is quite high. The HP Envy 4505 printer setup is a quick and straightforward process to perform. Continue reading this page to know the complete setup process in detail. FIRST TIME PRINTER SETUP- COMPLETE GUIDE The setup process includes five simple steps. You can perform this setup process even if you don’t have any experience in setting up the printer in the past. Five simple steps: • Preparing the printer (unpacking) • Turning on the printer • Loading paper • Installing and aligning the ink cartridges

• Installing the printer software Now, let’s see the entire HP Envy 4505 printer setup process in detail. Preparing the printer (unpacking) Unpack your printer completely to begin the setup process. • Remove the HP Envy 4505 printer from the plastic cover and Styrofoam pieces. • Now, gently peel off all the packing tapes present inside and outside of the printer. • Remove the cardboard pieces present in the ink cartridge area. • After unpacking your printer completely, place it on a dust-free surface. • Ensure that the unwanted packing materials are recycled properly. Turning on the Hp Printer After preparing your printer, turn it on to go to the next step of the setup. • Connect your HP Envy 4505 printer directly to the AC outlet. • Now, your printer will turn on automatically. • If it doesn’t, press the ON/OFF or Power button on your printer’s control panel to turn it on. • If you’re turning on the printer for the first time, it might take a few minutes to complete the initial boot-up process. • So, wait patiently for the boot-up process to complete.

• Once it is done, set the basic settings, such as language, date/time, etc., as per your preferences. • Finally, press OK. Loading paper Prepare and load the recommended paper type into the tray. • Open the input paper tray and extender on your printer. • Move the guides to the ends. • Fan and load the prepared paper into the tray. • Ensure that the paper is not overloaded in the tray. • Adjust the guides and push the tray towards the printer. • Open the output tray of your printer. Installing & aligning the ink cartridges Install and align the cartridges to complete the HP Envy 4505 printer’s hardware setup. • Raise the scanner unit of your printer. • Unpack the ink cartridges. • Ensure that the carriage is idle.

• Open the cartridge lids. • Now, install the unpacked ink cartridges into their slots. • Close the lids and lower the scanner unit. • Now, your printer will automatically start to print the alignment page. • Once the alignment page is printed, place it on the scanner glass and press OK. • If the printer scans the alignment page successfully, it means the ink cartridges are installed properly. • Otherwise, remove and reinstall the cartridges. Installing the hp envy 4505 software Complete the HP Envy 4505 printer setup by installing its software on your computer. • Run the printer driver file on your computer. • Select and install the desired printer drivers when prompted. • Similarly, when prompted, select the connection type using which you wish to connect your printer to the computer. • Install the printer driver to complete the setup process. • After installing the printer software, print or scan a test page to check whether the setup process is done correctly. • If your printer scans or prints the test page successfully, the setup is done correctly. • Otherwise, re-perform the setup process. HP ENVY 4505 DRIVER • Download the HP Envy 4505 printer driver from its official support page if the setup CD/ROM is not provided during the purchase or the provided one is incompatible with your OS. • Go to the official support page of your printer. • Click the Software, Drivers and Firmware tab.

• Check to ensure that your OS type is selected correctly on the Software Download screen. • Now, locate the recommended printer driver for your OS type and click the Download button beside it. • Once the printer driver is downloaded, run and install it on your computer. MANUAL DOWNLOAD • Visit the official support page of your HP printer. • Click the Manuals tab. • Select the manual you want. • Now, the selected manual will open within your browser. • Click the Download icon available on the opened screen to download the manual. To Know More About HP Envy 4505 : Wifi Setup ,Airprint Setup, ink Cartridge and More Refer this Link https://airprint.us/hp- envy-4505-printer/