314.298.2662 [email protected] 2018 YEARBOOK The NorTh AmericAN This ad is to be placed so that this bottom is at the binding. The ad will be sideways on the back This ad is 5.0” x 8.0”. Our ad from the 2015 book has a black border around it. We want to LaFRANCE Die cAsTiNg AssociATioN LaFRANCE LaFRANCE continue using that black border format for this ad also. LaFRANCE YOUR DIRECT SOURCE FOR: DIE RELEASE LUBRICANTS FRANDRY PLUNGER LUBRICANTS CERAMIC COATINGS SPECIALTY PRODUCTS NEXT DAY SHIPPING NADCA Chapter 17 • St. Louis, Missouri 2O18 Yearbook cover. Keeping AMeriCA greAt CHAPTER 17
FLYWHEEL & CONVERTER HOUSING TRANSMISSION HOUSING LOWER BLOCK PILLARS CRANK SUPPORT TRANSMISSION CASES AWD HOUSING OIL PANS OIL SUMP VALVEBODY PREMIUM INTERNAL COMPONENT STARTER HOUSING CYLINDER HEADS ROOF FRAMES ALTERNATOR FRAMES STEERING SECTOR CAM COVER CAM SUPPORT REAR TRANSMISSION HOUSING FRONT ENGINE COVERS REAR WHEEL TRANSMISSION FRAME RAIL / CROSS MEMEBER CHASSIS (STRUT TOWERS) ENGINE BLOCK AIR CONDITIONER COMPRESSOR HEADS G.H. TOOL & MOLD 28 Chamber Drive Washington, MO 63090 Phone: 636.390.2424 Fax: 636.390.2626 www.ghtool.com
Est. 1973 Specializing in the engineering and building of injection molds & dies for the plastics and die casting industry. “Let us Listen, Act & Deliver to exceed your expectations.” 4 Southlink Dr. www.htdinc.com Washington, MO 63090 636-239-7543 ISO 9001 Certified 1 1
ATTENTION CHAPTER 17 MEMBERS For Any Chapter 17 Changes of Address or Employment Please Contact Jeff Chism Finkl Steel 308 Eirene Street Arnold, MO 63010 (314) 378-5115 [email protected] Table of Company Directory ...........45, 47, 49, 51, 53, 55, 57, 59 Contents Index of Advertisers ...................................4, 6 List of Advertisers ........................16,18, 20, 22 (by product or service) List of Members ....................66, 68, 70, 72, 74 (and company affiliation) List of Officers .........................................33, 35 NADCA Board of Governors ......................12 NADCA Corporate Members ....................10 NADCA Staff Directory ...............................30 National Officers .........................................28 Reference Charts Alloy Chart .................................................62 Scholarship Fund Information ..................67 Scholarship Application ...................... 64, 65 St. Louis Chapter 17 Past Chairmen ..........42 2
PEAK PERFORMANCE WHEN IT MATTERS Uddeholm Dievar • ESR quality steel • Improved total tooling economy • Improved die life • Repeatable, consistent productivity • Reduced risk of erosion and cracking IMPROVING TOTAL TOOL LIFE DESIGNED FOR PREDICTABLE PRODUCTIVITY Uddeholm’s solutions for high pressure die casting are developed to meet the high demands on performance and die life in long production runs. With superior resistance to pressure and temperature, this market leading tool steel ensures reliable tools and efficient production. Uddeholm USA 1-(800) 638-2520 (1-800-metal-20) www.uddeholm.com/usa Since 1668 we have been providing a wide range of innovative cutting-edge solutions for our customers in demanding segments. Our dedicated employees work in almost ninety countries and together we deliver improved competitiveness to clients worldwide. Welcome to Uddeholm, #1 in high performance tool steel. 3
Index of Advertisers A Plus Machine .............................................................54 + Allemann Machine & Tool ...........................................39 Astaras Inc. .....................................................................7 Bholster Technolosgies .................................................21 Bohler/Uddeholm ...........................................................3 BuhlerPrince Inc. ...........................................................73 Castool Tooling Systems ..............................................31 Davis Tool & Die ............................................................36 Ellwood Specialty Steel..................................................5 Engineered Lubricants .................................................17 Flow Science Inc. .........................................................19 Frech U.S.A. ...................................................................67 FTS Delivery ....................................................................26 Gateway Metals Inc. ...................................................38 G.H. Tool & Mold .............................. Inside Back Cover Godfrey & Wing Inc. ....................................................29 Goff, Inc. .......................................................................27 Hellebusch Tool & Die ....................................................1 Hitiachi Metals .............................................................58 K.L. Stewart ....................................................................61 Klockowski & Associates Inc. ..............................................44 4
Long_Live_Ad_Die_NADCA_8x11:4.75 7/15/08 8:47 AM Page 1 LONG LIVE YOUR DIE. Ellwood Specialty Steel – Manufactures ●ExELL H13 Superior ●ExELL Tuf-Die ●ExELL Hot- Die Ellwood Specialty Steel manufactures ExELL H13 to be the toughest hot All Produced in North America. That means it’s manufactured to meet the most work die steel – the only one produced in North America. That means demanding tooling requirements, and exceed superior quality acceptance criteria every time. it's manufactured to meet the most demanding tooling requirements, and exceed superior quality acceptance criteria every time. ESS is the number-one choice for fast delivery, committing to delivering your order on the day promised or earlier. To find out more about the different ways Ellwood about the different ESS is the number-one choice for fast To find out more ExELL Hot Work Steel grades continues to endure, delivery, committing to delivering your ways ExELL H13 steel continues to go to ess.elwd.com order on the day promised or earlier. endure, go to And if that doesn’t impre Ellwood Specialty Steel - Ready and Reliable. ss you, then http://longlive.elwd.com United States maybe our secure and reliable war- Ellwood Specialty Steel TOOL STEEL PRODUCTS 800-932-2188 ranties will. MADE IN THE [email protected] USA Canada Ellwood Specialty Metals 877-978-2772 Ellwood Specialty Steel - Ready and Reliable. [email protected] United States Canada Ellwood Specialty Steel Ellwood Specialty Metals 800-932-2188 877-978-2772 [email protected] [email protected] 5 5
Index of Advertisers L.K. Machinery, Inc. ......................................................15 LaFrance ...................................................... Back Cover Lindberg/MPH ...............................................................76 MK Distributing ..............................................................56 Midland Industries Inc. .................................................23 Mueller Machine & Tool Co. .......................................26 Patterson Mold & Tool ...................... Inside Front Cover Paulo ..............................................................................25 PCS .................................................................................40 Production Castings, Inc. ............................................32 R-Bet Sales, Inc. ............................................................52 Regloplas ......................................................................13 Schaefer Group Inc. ....................................................37 Schmolz + Bickenbach ................................................50 Schwoeppe Engineered Products .............................24 Schwoeppe Machine & Tool ......................................24 SDC, Inc. ........................................................................40 Spartan Light Metal Products .....................................11 St. Louis Tool Supply Inc. ................................................9 Tooling Associates ........................................................34 Toshiba Machine ..........................................................43 TurnKey Tool & Die ........................................................46 6
AN INNOVATIVE MATERIAL FOR DIE CASTING, TOOLING, AND ALUMINUM PERMANENT MOLD LOWER OPERATING COST COMPARED TO H-13 TOOL STEEL Anviloy 1150 is a tungsten-based material that was developed primarily for die-casting, ® aluminum permanent mold, and difficult extrusions. Anviloy has a low coefficient of thermal expansion, good thermal conductivity and good material properties at elevated temperatures combine for superior performance in a variety of applications. This unusual combination of properties results in less thermal fatigue and soldering in the die cast or extrusion. ® ANVILOY has been TRUSTED by the Die Casting Industry for years and is once again AVAILABLE from Astaras, Inc. ® We have purchased the Anviloy Business from the former industry leader CMW International. We currently have stock and are ready to ship. Astaras, Inc. www.anviloy.com 6901 Bryan Dairy Road Suite 160 727-546-9600 Largo, FL 33777 [email protected] 7
NADCA Chapter 17 Members and Friends, 2017 is now behind us and as we look forward to a great 2018 we would like to present you with the new NADCA Chapter 17 - 2018 Yearbook. We hope this book is a great resource for you and your business. This book contains all our great sponsors and companies that make our industry grow and flourish. Please take some time to reach out to those companies that support our Chapter. As always, I would like to take an opportunity to thank all our Die Cast Supplier’s for their great support and dedication to Chapter 17 and our members. We truly appreciate all you do for our Chapter by advertising in this yearbook and on our email announcements, and sponsoring our events. You are a big part of why we can put on Educational Seminars and award scholarships to promising young students with an interest in our industry. Thank you very much for your support. This year we have some very exciting news regarding Chapter 17 and the way we communicate with our members and friends. This January we will be launching our New Chapter 17 Website. We are hoping this will take us to a whole new level of supporting and communicating with all of you. It will have great content as well as new ways of paying for events and sponsoring. I will be sending out formal emails with the launch date. Your feedback on this website will be Vital in making it all it can be. The web address will be nadcachapter17.com and we hope you start visiting and utilizing its many features. We have also created a new position on the board to monitor and update this new technology. Dale Greife from Aspire Machine Tool in Union, MO has graciously donated his time and expertise in creating this website and he will be the new IT Chairman. A HUGE Thank You goes out to him for all his hard work and dedication to the Chapter. I would also like to take some time to introduce our new addition to the Board who will be handling our Advertising. Skylar Reilly from Aspire Machine Tool has come onboard to help with the yearbook and other advertising related duties. If you have not already, you should be seeing some emails coming over from her. Skylar’s information is listed in this handbook. Several great meetings and events are planned for 2018 so please refer to this handbook or start visiting the website when it’s launched to see the dates and locations. As always, I will be sending out emails to let everyone know all the details as well. Thank you everyone for allowing me to be a part of your businesses. It is always my pleasure to serve you as your NADCA Chairman. I am always here to help in any way I can. Please feel free to reach out to me anytime and I will do what I can to assist you. We look forward to seeing all of you at our 2018 meetings and events. Have a great year everyone. Warm regards, Jeff Chism Chapter 17 Chairman Cell: 314-378-5115 [email protected] 8
www.stltool.com Indexable Tooling Taps Metalworking Fluids Workholding Toolholding Carbide Inserts Endmills Quality Control Special Tools Drills 1020 Fox Chase Ind. Dr. Arnold, MO 63010 314-894-9090 Fax: 314-894-9094 Email: [email protected] www.stltool.com Specializing In Cutting Tool Applications & New Machine Tool-Ups 9 9
CORPORATE MEMBERS A & B Die Casting Company, Inc. Dynacast Incorporated - Elgin Plant Kind Special Alloys LLC Technologies AarKel Tool & Die Inc. Dynacast Incorporated - Kirby West Corporation Promatek Research Center - a Division ABCO Die Casters Incorporated Germantown Plant KSM Castings USA Inc. of Cosma Part of Magna ACE Precision International, LLC Dynacast Incorporated Lake Forest Plant Kuka Robotics Corp International Acme Alliance, LLC (North America) Dynacast Ltd. L K Machinery Inc. Pyrotek Inc. Ahresty Mexicana, S.A. De C.V. Dynacast Mexico LaFrance Manufacturing Co. Quad Steel CO., Inc. Ahresty Wilmington Corporation Dynamo Inc. Lakeside Casting Solutions Quaker Chemical Corporation ALCOA Cast Products Eastern Alloys Inc. Le Sueur Incorporated Quick Cable Corporation Allegiant International LLC EDCO Inc. Leco Corporation Rane Precision Die Casting Incorporated Allied Metal Company EKK, Inc. Lethiguel SAS RAYTEQ LLC American Die Cast Releasants LLC Ellwood Specialty Steel Co. Lindberg MPH RCM Industries Inc. - Aallied Die Casting American Metal Chemical Corp (AMCOR) Empire Die Castings Company Littler Diecast Corporation - Company - Franklin Park AmesburyTruth Exact Metrology A Braham Corporation RCM Industries Inc. - Aallied Die Casting Anderton Castings De Monterrey Exco Engineering M & I Machine Company of North Carolina Anderton Castings LLC FCA Canada Inc - Etobicoke Casting Madison Precision Products Inc. RCM Industries Inc. - Imperial Die Anviloy By Astaras Inc. Plant Madison-Kipp Corp. Casting Company Apex Aluminum Die Casting Company FCA US LLC Kokomo Plant Madison-Kipp Corp. RCM Industries Inc - Inland Die Casting ArcelorMittal Industeel Ficosa North America Corp. Madison-Kipp Corp. Company Audubon Metals LLC Fielding Manufacturing Incorporated Mag-Tec Casting Corporation Regal Beloit Corporation R&D Center Auto Cast Incorporated Fisa North America Inc. MAGMA Foundry Technologies Inc. Regloplas Corporation Avkem International Flow Science Inc. Magna Mirrors NA Reis Robotics USA Inc. B&L Information Systems, Inc. FONDAREX SA Master Lock Rheocast Company Badger Metal Tech Inc. Fort Recovery Industries Incorporated Meitler Consulting Inc. Rimrock Corporation Baldor Electric Company - Foseco Mercury Marine - Fond Du Lac Roberts Sinto Corp. Southwestern Die Casting Frech USA Inc. Meridian Lightweight Technologies Ryobi Die Casting (USA) Inc. Bedford Machine & Tool Inc. Fremar Industries Meridian Lightweight Technologies Inc. Ryobi Die Casting Mexico Blasch Precision Ceramics FT Precision Meridian Magnesium Die Casting Ryoei Co. Ltd. Blue Ridge Community College Future Die Cast & Engineering Inc. Meridian Technologies Mexico Sanyo Special Steel Co. Ltd. Blue Ridge Pressure Castings Inc. G & M Die Casting Company Metal Conversions Ltd. Saran Industries LP Bob McClintic & Associates General Die Casters Incorporated Metal Mechanics Inc. SB Enterprises Bodycote Sturtevant General Motors Corporation - Bedford MIA Seating Corp. Schmolz & Bickenbach Canada Bohler-Uddeholm Corporation General Motors Powertrain HQ Michigan Automotive Compressor, Inc. Schmolz & Bickenbach USA Inc. Brach Machine Inc. GF Linamar LLC Microcast Technologies Corporation SDC Incorporated Briggs & Stratton Corp. - Gibbs Die Casting Corporation Microcast Technologies Mexicana Shiloh Industries - Alma Plant Milwaukee Corporate HQ Godfrey & Wing Inc. Midland Technologies Inc. Shiloh Industries - Auburn Plant Briggs & Stratton Corp. - Murray Greenfield Industries Inc. Midwest Die Casting Corporation Shiloh Industries - Clarksville Plant Briggs & Stratton Corp. - Poplar Bluff Gudel Inc. Miniature Casting Corporation Shiloh Industries - Pierceton Briggs & Stratton Corp. - Statesboro Henkel Corporation Minneapolis Die Casting LLC Shiloh Industries - Pleasant Prairie BuhlerPrince Inc. HERCO, LLC Modern Equipment Co. Simalex Manufacturing Company C Palmer Manufacturing Company Heritage Die Casting Company Mokon Limited Cal-Miser Aluminum Systems Inc. High Temperature Systems Inc. MORESCO USA Inc. SKS Die Casting & Machining Inc. California Die Casting Incorporated Hildreth Manufacturing LLC Moultrie Die Cast Soldy Manufacturing Company Callen Die Casting LLC Hill and Griffith Co. Muskegon Castings Corporation Spartan Light Metal Products Inc. Callen Manufacturing Corporation Hitachi Metals America LLC NADCA Spartan Light Metal Products LLC Canada Metal (Pacific) Limited Honda De Mexico - Celaya Engine Plant Nebraska Aluminum Castings Inc. Spartan Light Metal Products LLC Canimex Incorporated Honda De Mexico - Nemak Kentucky Spectro Alloys Corp. Canmet MATERIALS - Celaya Transmission Plant Nemak USA Stoner Inc. Natural Resources Canada Honda Engineering North America EGA - Nemak Wisconsin - Gateway Plant STRATTEC Component Solutions Carteret Die Casting Corporation Tool Block: Powertrain Equipment Nemak Wisconsin - Taylor Facility StrikoWestofen America Cascade Die Casting - Atlantic Honda Manufacturing of Alabama LLC New Brunswick Plating Inc. Superior Aluminum Alloys Cascade Die Casting - Great Lakes Honda North America New Century Heaters Ltd. Swiss-Tek Coatings Inc. Cascade Die Casting - Mid-State Honda North America - Purchasing North American Casting Corporation Team Industries Cast Products, Inc. Honda of America Mfg - Oerlikon Balzers Coating USA Inc. Techmire Cast Specialties Incorporated Anna Engine Plant: ALDC Omen USA Technical Die-Casting Inc. Cast-Rite Corporation Honda of Canada Mfg Inc. - Omni Die Casting Incorporated TESLA Motors Castec Corporation Engine Plant: ALDC Pace Industries - Airo Division The Schaefer Group Inc. Casting Guru International Honda Power Equipment - Pace Industries - B&C Division Therm-Tech of Waukesha Castool Tooling Systems Aluminum Die Cast Pace Industries - Cambridge Division Thomas & Betts Monterrey S. De R.L. Chem-Trend LP Honda Precision Parts Georgia LLC - Pace Industries - Chihuahua De C.V. Chemtool Incorporated Aluminum Die Cast Pace Industries - Grafton Division Titus Group - Titus Tool Co Inc. Chicago White Metal Casting Inc. Honda R&D America - Pace Industries - Harrison Division Toshiba Machine Co America Colosio Srl O: Aluminum Division Pace Industries - Product Tech Division TRU Die Cast Corporation Columbia Machine Works Inc. Honda Transmission Manufacturing Inc. Pace Industries - St Paul Division TVT Die Casting & Manufacturing CompX Security Products HPM North America Corporation Pace Industries de Mexico Incorporated Cosma Casting Michigan - A Division of HTS International Corporation Pacific Die Casting Corporation Twin City Die Castings Co. Magna International Huf North America Die Cast Corporation Pacific Die Casting Corporation - Twin City Die Castings Co. Cottam Diecasting Ltd. Hyatt Die Cast & Engineering Corporation Commerce Twin City Die Castings Co. Crecocast IBC Coatings Technologies Inc. Paulo Products Company UBE Machinery Inc. Cuprum SA De CV IDRA North America Inc. PCS Company Ultraseal America Inc. Custom Alloy Light Metals Inc. Imperial Zinc Corp. PHB Incorporated VERSEVO Inc. Daido Steel Co Ltd. Industrial Innovations Inc. Phillips - Medisize Magnesium Viking Technologies DeCardy Diecasting Company Interbolts Inc. Injection Molding Visi-Trak Worldwide, LLC Deco Products Company International Die Casting Incorporated Phygen Coatings Inc. Walbro Engine Management Delaware Dynamics Italpresse Gauss Pinnacle Manufacturing Company Inc. Walker Die Casting Incorporated Destin Die Casting LLC J&S Chemical Corp. PiQ2 Wheelabrator Group Die Cast Press Manufacturing Co. Jackson Die Casting LLC Port City Group Wheelabrator Group USA Die Process Control Systems JTEKT Automotive Tennessee- Port City Group Whitehead Die Casting Company DieTech & Engineering Inc. Morristown Inc. Port City Metal Products Incorporated Wilkast, Inc. DTP Diecast Solutions LLC Kamtek Premier Die Casting Company Wollin USA Dwyer Instruments Inc. Kason Industries Incorporated Prestige Casting Incorporated Wrex Products Inc. DyCast Specialties Corporation KenWalt Die Casting Corporation Production Castings Incorporated Yushiro Manufacturing America Dyersville Die Cast Key Safety Systems-Seat Belts / Progressive Components YXLON 10 Die Casting Division Prolong Tool / Prolong Surface Zitai USA - Die Casting Equipment Group
Spartan is a family-owned aluminum and magnesium die cast manufacturing company with expertise in machining and assembly as well as design and analysis. Established by Henry A. Jubel in 1961, ENGINEERING Spartan has been an industry leader in custom die castings for over 50 years. Our scope of experience includes design, engineering assistance and strict quality and process control for complex products. We pride ourselves on delivering high quality products while leading our industry in safety for our employees. QUALITY Our reputation for quality and safety has made us a valuable partner with a wide range of manufacturers. Corporate Service Center 3668 South Geyer Road, Suite 210 St. Louis, MO 63127 EXCELLENCE Email: [email protected] Phone: 314.620.2500 www.spartanlmp.com www.facebook.com/SpartanLightMetalProducts 11
Board of Governors Chairman of the Board Douglas D. Harmon, Chief Executive Officer, Twin City Die Castings Co., [email protected] Vice Chairman of the Board Patrick J. Greene, President, Cascade Die Casting Group - Group Services/Corporate Headquarters, [email protected] Treasurer Steven Church, President & CEO, Gibbs Die Casting Corporation, [email protected] Robert C. Marconi, CEO, RCM Industries Inc - Aallied Die Casting Co of IL , [email protected] Rod Taylor, COO, Pace Industries - Corporate Office, [email protected] Stephen Udvardy, President, NADCA, [email protected] Don Dulkoski, Director of Aluminum & Zinc Sales, Allied Metal Company, ddulkoski@alliedmetalcomp Yeou-Li Chu, Director of R&D, Ryobi Die Casting (USA) Inc., [email protected] David S. Wolf, District Sales, ArcelorMittal-Industeel, David.Wolf@arcelormittal Harold J. Gerber, Executive Director of Market Development, [email protected] Mike L. Meyer, General Manager, Mercury Castings - Division of Mercury Marine - WI, [email protected] Chris Storlie, GM, Deco Products Co., [email protected] Scott A. Frens, Manager - Custom Sales, Fort Recovery Industries Inc., [email protected] Leonard A. Cordaro, President, Premier Die Casting Company, [email protected] Stephen R. Dathe, President, A & B Die Casting Company, Inc., [email protected] Todd Ikerd, President, Auto Cast Inc., [email protected] Ignacio Musalem, President, Cana-Datum Moulds Ltd., [email protected] Tom Vann, President, Visi-Trak Worldwide, LLC, [email protected] Joseph R Vitollo, President, ABCO Die Casters Inc., [email protected] Eric Treiber, President and CEO, Chicago White Metal Casting Inc., [email protected] Mark Los, President/CEO, BuhlerPrince Inc., [email protected] William Stockhorst, President/CEO, Turn Key Tool & Die, [email protected] Robert Worthy, Sales, L K Machinery Inc., [email protected] Alan Gergen, Sales Manager, Spectro Alloys Corp., [email protected] William Hiegel, Sales Mgr., Custom Alloy Light Metals Inc., [email protected] Robert DeNeff, Staff Engineer, Honda North America Services LLC- Powertrain: Engineering Center, [email protected] Daniel J. McLean, Vice President-Sales & Marketing, [email protected] Ryan Winter, VP Engineering Services, Eastern Alloys Inc., [email protected] Dan Langer, VP/Materials Manager, PHB-Die Casting Division, [email protected] 12
1313
CORPORATE MEMBERSHIP The North American Die Casting Association (NADCA) is the sole trade and professional society of the die casting industry. NADCA membership consists of both cor- porate and individual members from over 950 companies located in every geographic region of the United States, Canada and Mexico. These companies include custom die casters (who produce die castings for sale to others), captive die casters (who produce castings for their own use in manufacturing a product), and suppliers to the die casting industry. CORPORATE MEMBERS RECEIVE • Recognition & Networking • Conferences Listing on the NADCA Web Site. CEO, CFO, Plant Managers’, Management Forum, Inclusion in the Leadership Directory. Marketing Managers. Highlighting in the Capabilities Directory. • R & D • Reports & Newsletters Research and development updates with “Insight” — a monthly newsletter. tangible and applicable results and the “Links” — a quarterly report providing timely annual R&D Strategic Plan. information on economic trends. State of the • Corporate Member Rates industry updates and environmental newsletter. Discounts for all NADCA events and publications. • Government Affairs Legislation monitoring, Washington For more membership information, please contact: representation, EPA regulations, government Membership Department affairs briefing. North American Die Casting Association • Surveys & Programs 241 Holbrook Drive Wage & Fringe Benefit Survey. Financial Survey. Wheeling, IL 60090 Executive Compensation & Salary Survey. Tel. 847/292-3600, Ext. 322 • Fax: 847/292-3620 Die Casting Index Program. Safety Award E-mail: [email protected] Program. Web Address: www.diecasting.org The History and Formation of North American Die Casting Association Founded January 1, 1989, NADCA is a combination of two long-standing organizations serving the die casting industry: the American Die Casting Institute, which was founded in New York in 1928, and the Society of Die Casting Engineers, which started in Detroit in 1954. ADCI was a trade association, originally representing custom die casters, then expanded to include captive die casters and industry suppliers as well. It developed the first die casting statistical services for members in 1930, and developed die casting product specifications. It also worked to improve manu- facturing methods and the die casting plant environment. Its work helped introduce improved molten metal handling methods and aided the development of fire resistant hydraulic fluids. In 1952, ADCI formed the Die Casting Research Foundation, which over the years funded university research in the areas of die steels, die lubrication, vacuum die casting, and alloy development. As ADCI grew it relocated from New York to Des Plaines, IL, and continued to revise and expand product guide- lines, to promote the use of die castings, and to publish a library of technical and management informa- tion. SDCE was an engineering society for improving education for, and dissemination of technical infor- mation to, the industry. It left Detroit at the end of 1979 and settled in Des Plaines, IL. SDCE relocated to the campus of Triton College in River Grove, IL at the start of 1982. In addition to publishing Die Casting Engineer magazine (bimonthly since 1957), SDCE had a long history of publishing text and ref- erence books, and of presenting educational courses and programs. Manuals and courses focused on die casting machine operation, dimensional repeatability, heat flow, gating, metallurgy, process control, maintenance, die design, metal melting and handling, and cost estimating, among others. SDCE’s pro- duction of a computer gating software program was an industry milestone. Worldwide study tours to plants and conferences in various countries were another popular program. The International Die Casting Congress and Exposition, a biennial event since 1960, quickly became the world’s leading forum for die casting technical presentations and equipment displays. The need for a more powerful and unified organization to meet increased competition and provide broader services to the industry led to the consolidation of the two associations. The consolidation of ADCI and SDCE to form the North American Die Casting Association (NADCA) became effective on January 1, 1989. Headquarters remained at Triton College until the move to the nearby suburb of 16 Rosemont, IL, early in 1992. 14 Reprinted by permission of NADCA. 14 17
L.K. MACHINERY, INC.L.K. MACHINERY, INC. IMPRESS-III COLD CHAMBER LK is committed to helping die casters become more competitive by improving product quality and lowering costs. With over 70 Die Casting and CNC models to choose from, we’ll work with you to find the best machinery to fulfill your needs. Our horizontal and vertical machining centers, designed to machine castings, are fast and efficient! Our goal is to help our customers develop highly efficient and reliable production cells. It’s what we do! 616.796.0777 LKADVANTAGE.COM 15 15
List of ALLOY SUPPLIERS Advertisers Midland Industries Inc. ............................... 23 (By product AUTOMATION EQUIPMENT or service) AND SUPPLIES R-Bet Sales, Inc. .......................................... 52 Schwoeppe Engineered Products ........... 24 Schwoeppe Machine & Tool .................... 24 D.C. INDUSTRY SERVICES A+Plus Machine .......................................... 54 Bholster Technologies ................................ 21 Flow Science Inc. ....................................... 19 K.L Stewart ................................................... 61 Klockowski & Associates Inc. .................... 44 L.K. Machinery, Inc. .................................... 15 DELIVERY SERVICES FTS Delivery .................................................. 26 DIE CAST DIES AND TRIM DIE BUILDERS Davis Tool & Die .......................................... 36 G.H. Tool & Mold .............Inside Back Cover Hellebusch Tool & Die .................................. 1 Mueller Machine & Tool Co. ..................... 26 Patterson Mold & Tool .....Inside Front Cover Schwoeppe Machine & Tool .................... 24 TurnKey Tool & Die ...................................... 46 16
17 17
List of DIE CASTERS Advertisers Production Castings, Inc. (Al, Zn) ............. 32 SDC, Inc. (Al, Zn) ......................................... 40 (By product Spartan Light Metal Products (Al, Mg)..... 11 or service) DIE CAST MACHINES BuhlerPrince Inc.. ........................................ 73 Frech U.S.A. ................................................. 67 K.L Stewart ................................................... 61 R-Bet Sales, Inc. .......................................... 52 Toshiba Machine ........................................ 43 DIE CAST MACHINE: SUPPLIES AND EQUIPMENT Castool Tooling Systems ............................ 31 Goff Inc. ...................................................... 27 K.L Stewart ................................................... 61 R-Bet Sales, Inc. .......................................... 52 Regloplas .................................................... 13 TurnKey Tool & Die ...................................... 46 DIE CAST MACHINE: REMANUFACTURING A+Plus Machine .......................................... 54 BuhlerPrince Inc.. ........................................ 73 Frech U.S.A. ................................................. 67 Klockowski & Associates Inc. .................... 44 18
Predicting defects flow3d.com/cast Let us show you how (505)982-0088 increases profits 19
List of DIE SETS, PINS AND Advertisers DIE MAKING SUPPLIES Allemann Machine & Tool ......................... 39 (By product MK Distributing ............................................ 56 or service) PCS ............................................................... 40 St. Louis Tool Supply Inc. .............................. 9 Tooling Associates ...................................... 34 DIE LUBRICANTS Engineered Lubricants ............................... 17 LaFrance .................................... Back Cover DIE LUBRICANTS EQUIPMENT R-Bet Sales ................................................... 52 Schwoeppe Engineered Products ........... 24 HEAT TREATING Paulo ............................................................ 25 HOT OIL & VACUUM EQUIPMENT Castool Tooling Systems ............................ 31 LaFrance .....................................Back Cover R-Bet Sales ................................................... 52 Regloplas .................................................... 13 20
We believe that all Casting Processes can be Reduced to a Simple Predictable Science! More than 16 years of research and development expertise in casting technologies Bholster simulations solve actual problems in the foundry: High Pressure Die Casting (HPDC) Reduced cycle-time, Solve porosity and leaker issues, reduce risks when quoting new programs . Low Pressure Here are some examples of what we can predict: Cycle Time Reduction Die Structural Castings Temperature HPDC Ultra Large Casting Development We can help you with: • Predicting when the liquid metal will freeze during the filling of a mold Precisely identified features that will solder if run faster. And found the correct die cooling that allowed us to meet our target cycle time. • Predicting the size and location of trapped air • Reducing cycle time by finding Flow Simulation and removing the “bottlenecks” for heat removal This is a flow • Heat loss during pour into shot sleeve simulation, but • Specify shot profile required to make Bholster takes this a good casting using simulations to a new level with • ...and much more! actually showing We are a consulting associate of Flow Science, the how gas porosity is creator of FLOW-3D® internationally recognized formed in the part. simulation software. FLOW-3D® is used by scientists and engineers worldwide for simulating a vast range of fluid dynamics, heat transfer and multiphysics problems. Motor Heat Sink 1.5mm Ribs We simulated ultra thin castings and were able to predict the actual no-fill defects. This Experts in Casting and Multiphysics Simulations simulation specified the shot speed, furnace temperature 506-300 Eglinton Avenue East and fast shot position required Toronto ON, M4P 1L5, Canada to successfully make a casting. Phone: 416.909.2027 Email: [email protected] www.bholstertech.ca 21
List of HYDRAULIC FLUIDS Advertisers Engineered Lubricants ............................... 17 (By product METAL FINISHING or service) Godfrey & Wing Inc. .................................. 29 Goff, Inc. ..................................................... 27 REFRACTORY, FURNACES AND SUPPLIES Lindberg/MPH ............................................. 76 R-Bet Sales, Inc. .......................................... 52 Schaefer Group Inc. .................................. 37 Schwoeppe Engineered Products ........... 24 TOOL STEEL SUPPLIERS Astaras Inc. ................................................... 7 Bohler/Uddeholm ......................................... 3 Ellwood Specialty Steel................................ 5 Gateway Metals ........................................ 38 Hitiachi Metals ............................................ 58 Schmolz + Bickenbach .............................. 50 TRIM PRESSES & AUTOMATED UNLOADER R-Bet Sales, Inc. .......................................... 52 Schwoeppe Engineered Products ........... 24 22
23 23
24
Heat Treating Brazing Metal Finishing Distortion? Cracked Dies? Slow Turnaround? For 75 years Paulo has served the St. Louis area tool and die industry. Put our experience to work for you and let us solve your heat treating challenges. Trust us with your most critical heat treating projects. Call 1 (866) PAULO-4U or visit www.paulo.com for a quote today. 25
Die Therm Engineering, LLC Grand Rapids · MI A Complete Thermal Design, Control, and Monitoring Solution Design Process is Better than Controls Heat Flow No Thermocouples Simulations Controls Die Surface Temp Monitors & Controls Heat Reduced Cycle Time Flow Consistent, Accurate Control Porosity Location Dimensions All Cooling Channels Extend Tool Life Measures Die Surface Temp Rapid Die Start-up Improve Customer Eliminate Scrap Eliminate Machining Satisfaction Operations Beat the Far East! J. Scott Kirkman, President [email protected] (616) 822-4016 Join the Revolution! MUELLER PRECISION MACHINE & TOOL TOOL COMPANY COMPANY * DIE CAST DIES * MOLDS * STAMPING DIES * FIXTURES *GAUGES * SPECIAL MACHINES 875 Kingsland Avenue * GRINDING – ALL TYPES * WELDING – ALL TYPES St. Louis, MO 63130 Excellence In Shot End * CONV. & ISOCUT EDM * TRAVELING WIRE EDM Components * DESIGN ENGINEERING * NADCA • SME • SPE 5932 JACKSON ST. LOUIS, MO • Shot Sleeves • Plunger Tips 314-522-8080 Call Toll Free! • Plunger Rods • Plunger Rings 26 1.800.553.2023 Phone: 314.721.2899 Fax: 314.721.4432 Business isn’t about how much gets produced — it’s about how much gets delivered. FTS Delivery, Inc. 8585 Page Avenue • St. Louis, MO 63114 [email protected] (314) 721-3399 800-995-5596 26 26 34
Goff Inc. “Blasting Solutions” 1244 Spinner Hanger The Goff 1244 Spinner Hanger requires a small footprint to fit into cell applications where castings can't be tumbled. The 2 chamber design allows continuous high production. Goff Spinner Hangers are available in various sizes and blast wheel arrangements for all blast cleaning requirements. 12216 NS 3520 * Seminole, OK 74868 Ph: 800-654-4633 Fax: 405-382-7013 www.goff-inc.com 27
North American Die Casting Association 3250 Arlington Heights Rd., Suite 101 Arlington Heights, IL 60004 (847) 279-0001 Phone (847) 279-0002 Fax E-mail: [email protected] Website Address: www.diecasting.org NADCA President Steve Udvardy 28 28
North America’s #1 Choice for Sealing Porosity Godfrey & Wing’s SEALANTS and EQUIPMENT recover more porous castings using less labor, floor space, sealant and electricity than any other company in the world. • Lean Dry Vacuum and Pressure (DVP) impregnation system. • Safe, efficient and ergonomic operator interface. • <18 month CapEx Recovery. • 99.5% recovery on porous castings. • 0 PPM. No damage or contaminates. • No VOC emissions, fully contained system. Godfrey & Wing Inc. 1-800-241-2579 godfreywing.com Impregnation Equipment • Sealants • Service 29 29
HEADQUARTERS Phone: (847) 279-0001 Fax: (847) 279-0002 [email protected] Athena Catlett Andy Ryzner Advertising & Editor Promotions Manager 847.808.3165 847.808.3153 [email protected] [email protected] Melisa Ryzner, CMP Beau Glim Education & Project Manager Meetings Manager 847.808.3164 847.808.3161 [email protected] [email protected] Donna Hutchins Stephen Udvardy Corporate Membership President Services Manager 847.808.3163 [email protected] [email protected] Trish Margel Paul Brancaleaon Director of Director of Research, Information Systems Education & Techonology 847.808.3157 847.808.3160 [email protected] [email protected] 30
Castool makes die casting better a measured amount of lubricant is applied only when needed plunger ring maintains seal with shot sleeve GUN-DRILLED HOLES FORM WATER CHANNELS TO CONTROL THERMAL DISTORTION SLEEVE MANUFACTURED FROM SPECIALLY-DEVELOPED HIGH MOLYBDENUM steel for longer life WATER COOLING PRODUCES TURBULENT FLOW ACROSS THE INSIDE FACE OF PLUNGER TIP TO MAXIMIZE HEAT TRANSFER BERYLIUM COPPER TIP FOR THERMAL STABILITY and rapid biscuit cooling gamma prime NITRIDE LAYER protects shot sleeve UP TO 680º C PEOPLE | PLANET | PROFIT canada +1-905-852-0121 thailand +66-38-345188 www.castool.com Follow our blog at www.castool.com/blog 31
32 32
NADCA BOARD OF DIRECTORS, 2018 Chairman & Membership Chairman: Jeff Chism St. Louis Finkl Steel Chapter 17 308 Eirene Street Arnold, MO 63010 (314) 378-5115 List of [email protected] Officers Vice Chairman: James Martin Patterson Mold & Tool 1005 Portwest Drive St. Charles, MO 63303-5971 (636) 940-9988 [email protected] Secretary: Pete Schiavone Gateway Metals, Inc. 9550 Watson Industrial Park Crestwood, MO 63126 (314) 918-1111 (800) 229-7842 [email protected] Treasurer: Alan Loeffelman Production Castings, Inc. 1410 W. Lark Ind. Pk. Fenton, MO 63026 (636) 677-3364 x 18 [email protected] Scholarship Chairman: Dave Coulter 20 Peppermill Court Wildwood, Mo. 63005 (314) 422-1108 [email protected] 33
TOOLING ASSOCIATES F u l l L i n e D i s t r i b u t o r Cutting Tools Grinding Tools Oils and Fluids EDM Wire Graphite Resin F Filters Ser ving the Die and Mold industr y for over 35 years C h u c k S h a d o w c s h a d o w @ s b c g l o b a l . n e t C: (314)517-8794 (314)739-2915 3 7 5 1 T h r e e O a k s F: (314)739-4709 B r i d g e t o n , M O 6 3 0 4 4 34 34
NADCA Education Chairman: John Dotson St. Louis Patterson Mold & Tool 1005 Portwest Drive St. Charles, MO 63303-5971 Chapter 17 (636) 940-9988 [email protected] List of IT Chairman: Dale Greife Officers Aspire Machine Tool 67 Corporate Dr. Union, MO 63084 (Continued) (636) 584-7882 [email protected] Board of Governors: Bill Stockhorst Turn Key Tool & Die 8 Progress Parkway Union, MO 63084 (636) 583-4505 [email protected] Trustee: Rick Spillman G.H. Tool & Mold, Inc. 28 Chamber Drive Washington, MO 63090 (636) 390-2424 x 106 [email protected] Advertising: Skyler Reilly Aspire Machine Tool 67 Corporate Drive Union, MO 63084 (636) 584-7882 35
1 Solution! 2 Locations! Your single source for: • Die Cast Dies: New & Rebuilds DAVIS TOOL & DIE • Trim Dies Fenton, Missouri • Plastic Injection Molds & • Magma-Heat & Flow Simulations • Part Design & Engineering Support PB TOOL & DIE • Engineering-Pro-E Unigraphics Soildworks Poplar Bluff, Missouri Invite 888 Bolger Court Davis Tool & Die Fenton, MO 63026 to be part of your Continuous tel: 636-343-0828 fax: 636-343-0875 Improvement email: [email protected] Team! www.davistool.com 36
37 37
38
Allemann Machine & Tool CUSTOM CORE PINS AND PIN MEASURING SYSTEM Measures 0 to 42 inches with a .0005 accuracy Expands measuring capabilities Eliminates need for micrometers Allemann Machine & Tool 136 Century Commerce Loop, Labadie, MO 63055 PHONE: (636) 432-0100 www.allemannmachine.com 39
...COUNT ON US... FOR ZINC & ALUMINUM PRECISION CASTINGS www.sdcinc.com ISO 9001:2008 Low Copper Aluminum our Specialty Equipment From 2 Tons to 700 Tons Annual Blank Orders and Stocking Programs Secondary Operations and Assembly Total Job Responsibility Running Aluminum Alloys 380, 383, 384, 360, 413 High Speed Zinc - 4 Slide Dynacast Alloy #3, #7 Conventional Zinc #3, #7 and ZA8 OUR CUSTOMERS HAVE RELIED ON US FOR COMPONENTS FOR OIL FIELD SERVICES, MOTORS, HANDLES, CARBURETORS, HOUSINGS, MECHANISMS, BASES, HAND TOOLS, AMMUNITIONS, NANO PACKAGING, TELECOMMUNICATION, AVIONICS, AND MANY MORE. CALL SDC FOR QUALITY DIECASTINGS – “ON TIME” AND “ON THE MONEY.” SDC INCORPORATED Phone: 573-468-3107 945 FRANKLIN Fax: 573-468-8966 SULLIVAN, MO 63080 [email protected] 40
DIE CASTING 2017 DIE CASTING CONGRESS Reserve 20 18 &EXPOSITION your space CONGRESS OBER 15-17 | INDIANAPOLIS, IN OCT &TABLETOP now! Indiana Convention Center 75% SEPTEMBER 18-20 EXHIBIT SPACE SOLD ATLANTA, GEORGIA NORTH AMERICAN DIE CASTING ASSOCIATION Atlanta Convention Center 36 at the AmericasMart CONGRESS PAPER PRESENTATIONS 2,500 ATTENDEES 2 EXCLUSIVE NETWORKING EVENTS www.diecasting.org/congress 41
North American Die Casting Association St. Louis Chapter 17 Chairmen 1962-2018 Eugene Weinmann 1962 - 1964 H. B. Christine 1964 - 1965 Marshall Zavertnik 1965 - 1966 Edward Kruszynski 1966 - 1967 C.W. Anbler 1967 - 1968 Frank Saller 1968 - 1969 Kort Pfabe 1969 - 1970 Joan DeWitt 1970 - 1971 Robert Bunz 1971 - 1972 Jack Bates 1972 - 1973 George Marik 1973 - 1974 Robert Glass 1974 - 1975 Vernon Gutzler 1975 - 1976 Mike Marr 1976 - 1977 Roy Woelbling 1977 - 1979 Mike Bernsen 1979 - 1980 Ron Steininger 1980 - 1981 Mark Kruszynski 1981 - 1982 Mike Welge 1982 - 1983 Jay Graeser 1983 - 1984 Allen Wren 1984 - 1986 Alan Loeffelman 1986 - 1989 Walter Hellebusch 1990 - 1991 Rodger Westhoff 1992 - 1993 Brian Leander 1994 - 1995 James Martin 1996 - 1996 Roy Woelbling 1996 - 1997 Mark Kruszynski 1998 - 1999 Phil Boldra 2000 - 2001 Mark Preuss 2001 - 2004 Randy Thomas 2004 - 2005 John Dotson 2006 - 2008 Brian Smith 2009 - 2010 Rick Spillman 2011 - 2012 Jeff Chism 2013 - 42
Reach for the Impossible. Achieve the Incredible. Proudly Presenting R-Series Can be Equipped for You with Hybrid High-Speed Injection, Electric Die Locking and Multi-Injection Position Unit All Electric Die Closing= The New R-Series can also be supplied with Energy Saving plus High Cycle an AC Servo Hydraulic Motor and TOSCAST 888, which provides you with the high quality, efficiency and productivity that you have come to expect with the Toshiba Machine name. Toshiba Machine Company, America Die Casting Division Electric Slow Speed With Servo High Speed Injection= 755 Greenleaf Avenue, Injection Quality with Increased Stability Elk Grove Village, Illinois 60007 Phone: (847) 709-7400 Email: [email protected] Toshiba Machine provides machines globally ranging from 135 to 4,000 US tons. 43
K Representing K K Problem Solvers & the Finest Products! K AAMRO – Metal Finishing Services-Blasting, Vibratory & Polishing Amcor – Fluxes, Wall Cleaners, Tap Out Cones & Anti-Solder Paste American Chemical Technologies, Inc. – Water Glycol (Hydraulic Fluid) K B.B. Blast Equipment – New and Used Shot Blasting Equipment Bachhuber Mfg. Corp. – Trim Press Unloaders BT Machines – Die Casting Machines & Trim Presses Cross Chemical – Beads, Release Agents, Chemicals, Machine Coolants, Plunger Lube & Heat Transfer Fluids K Customer Tailored – Nozzles, Noses, Plungers, Goosenecks, Piston Rings, Autopour Ladles (Stainless/Ceramic), Hand Ladles, Skimmers, Steel Funnels, Protection Tubes & Crucibles Die Process Control Systems – Jet Core Cooling Do-Rite Die & Engineering – Die Casting Dies K Firebrick – Furnace Relining & Repairs, WAM Refractory & Ceramic Fiber Blanket Industrial Innovations, Inc./Advance Automation – Fanuc Robots/Integration, End of Arm Tooling, Reciprocators, Spray Heads & Manifolds, Lube Mixing Systems, Ladles, Shot Sleeve Hones, Trim Lube Applicators & Lubricant Reclaim Systems, Conveyors Kelm-Acubar Company – Forged Goosenecks, Tie Bars & Specialty Sleeves K KZ Industrial LLC – Crucibles M & I Machine – New & Reworked Shot Sleeves & Plunger Rods Machined Metals Manufacturing – Secondary Machining Midwest Products & Consultants, Inc. – Water Treatment Cooling & Waste K Mokon – Cooling Tower Systems, Hot Oil Units & Chillers Proficient Tool – Die Cast Dies Profile Tool & Engineering Inc. – Trim Dies Progressive Components – Mold Components & Chill Blocks Rock Valley Oil & Chemical Co. – Maintenance Oils & Fluids K Semco, Inc. – Plunger Tips Spectro Alloys Corp. – Aluminum Alloys T.W. Machine Service – Die Casting Machine/Trim Press Repair & Remanufacturing Thermtronix – Aluminum Melting Systems K Thomas Conveyor – Conveyors, Material Handling & Storage Equipment Tiocco – Hydraulic Filtration Equipment & Elements VDS America, Inc. – Vacuum Equipment, Valves & Chill Blocks Auto & Transfer Ladles, Ingot Loaders, Machinery Mounts, Ceiling Cleaning, Painting, Used Equipment & Much More! K FINE PRODUCTS FOR THE DIE CASTING INDUSTRY K Ryan Klockowski Gary P. Klockowski Cell: 847.507.1580 Tel: 847.931.9113 Fax: 847.931.9154 Fax: 847.931.9154 Cell: 847.778.9081 [email protected] [email protected] 9N824 Apache Run • Elgin, Illinois • 60124-8411 44
Company Directory A+ PLUS MACHINE,LLC (715) 239-6915 20521 State Hwy. 64, Cornell, WI 54732 Fax (715) 239-6903 Tamarah Jenneman www.aplusmachine.com ADVANCED TECHNOLOGY SERVICES - PRESS DIV (309) 693-4000 6531 Wyman Court, Indianapolis, IN 46220-4332 (309) 693-4013 ALLEMANN MACHINE & TOOL (636) 432-0100 136 Century Commerce Loop, Labadie, MO 63055 Fax (636) 432-0102 Terry Allemann www.allemannmachine.com ALLIED METAL CO. (312) 225-2800 2059 S. Canal Street, Chicago, IL 60616 Fax (312) 225-1161 3440 Lightfoot Mill Road, www.alliedmetalcompany.com P.O. Box 24566, Chattanooga, TN 37422 Don Dulkoski AMERICAN PRECISION DIE CASTING (573) 885-0018 100 American Way, P.O. Box 723, Cuba, MO 65453 Fax (573) 885-0225 Don Bethel Kevin Herclues Mark H. Steele www.apdiecasting.com Lyndsey Campbell Tony D. Matchell Jim Wilkinson Michael J. Clonts Kendal Pope ANDERTON CASTINGS LLC (254) 938-2541 222 Lely Drive, Troy, TX 76579 Fax (254) 938-7117 Arturo Alcantara Camille Lecoutre www.andertoncastings.com Charles Ground Celia Martinez ASTARAS, INC. (727) 546-9600 6901 Bryan Dairy Road, Suite 160, Largo, FL 33777 www.anviloy.com Ross Wayman BADGER METAL TECH, INC. (262) 252-3804 N169 W21010 Meadow Lane, P.O. Box 156, Jackson, WI 53037 Fax (262) 252-3956 Marvelle Chapman Tim Newman www.badgermetal.com BODINE ALUMINUM, INC. (636) 462-2200 100 Cherry Blossom Way, Troy, MO 63379-2516 Fax (636) 462-4302 BHOLSTER TECHNOLOGIES (416) 909-2027 506-300 Eglington Avenue East, Toronto ON, M4P 1L5, Canada www.bholstertech.com Rabi Bhola BOHLER-UDDEHOLM CORPORATION (800) 638-2520 / (630) 350-1000 2505 Millennium Drive, Elgin, IL 60124 Fax (630) 883-3101 Ulf Wisen www.bucorp.com 45
The Best in “Ready to Run” Die Cast Tooling 8 Progress Parkway Union, MO 63084 Phone: 636-583-4505 Fax: 636-583-4525 www.tktool.net [email protected] 46
Company Directory (Continued) BRIGGS & STRATTON CORP. (573) 686-3004 731 Highway 142, Poplar Bluff, MO 63901-8602 Fax (573) 686-2140 Jonathan Eads Wayne Kinsey Ron Rowland Daniel Garner BUHLER PRINCE, INC. (616) 394-8248 670 Windcrest Dr., Holland, MI 49423 Fax (616) 394-1250 Kathy Perkins www.buhlerprince.com CASTINGS FOR INDUSTRY (314) 729-0224 9515 Country Club Green Dr., St. Louis, MO 63127 Fax (314) 729-0377 Tom Jansberg castingsforindustry.com CASTOOL TOOLING SYSTEMS (905) 852-0121 2 Parratt Rd., Uxbridge, ON, Canada L9P 1R1 Fax (905) 852-2300 Paul Robbins www.castool.com CATERPILLAR (309) 675-2061 100 Tractor Drive, Bldg. MM2 Dock ML, Peoria, IL, 61630-7650 Fax (309) 675-3903 CHEMTOOL INC., CORPORATE TECHNOLOGY CENTER (815) 957-4140 801 West Rockton Rd., Rockton, IL 61072 Fax (815) 624-0292 Kari Larson www.chemtool.com CHEM-TREND (800) 323-7771 / (517) 546-4520 1445 W. McPherson Park Dr., P.O. Box 860, Fax (517) 546-6850 Howell, MI 48844-0860 www.chemtrend.com Mac Grace CONSULTANT LUBRICANTS, INC. (636) 926-9903 9 Research Park Drive, St. Charles, MO 63304-5624 Fax (636) 926-9727 David Ostermeyer CONTINENTAL CASTING LLC (573) 735-4577 801 Second Street, P.O. Box 278, Monroe City, MO 63456 Fax: (573) 735-8290 DAVIS TOOL & DIE (314) 343-0828 888 Bolger Court, Fenton, MO 63026-2016 Fax (314) 343-0875 Rich Adams Bill Davis www.davistool.com ELLWOOD SPECIALTY STEEL (800) 932-2188 / (724) 657-1160 499 HoneyBee Lane, New Castle, PA 16105 (724) 654-9550 Scott Hesser ENGINEERED LUBRICANTS (314) 872-9540 11525 Rock Island Court, Maryland Heights, MO 63043-3597 Fax (314) 872-9544 April Klutenkamper www.englube.com 47
NORTH AMERICAN DIE CASTING ASSOCIATION MEMBERSHIP PLUS: MEMBERSHIP BENEFITS INCLUDE A Social Networking • Access to Die Casting Solutions - Community for engineers Opportunity. • Quarterly Downloadable NADCA Publications • Online Engineering Calculators - Including various apps and tools Membership Plus grants access to Die Casting • Exclusive Quarterly Technical Webinars Solutions, a new online community of information 2 and resources geared towards engineers. • Exclusive access to PQ & Gating Apps NEW! • Greenhouse Gas Calculator COST TO UPGRADE • $21 NADCA Individual Members • $21 NADCA Corporate Member Employees www.diecasting.org/membership/plus • $106 Non-Members (Includes $5 processing fee, $21 Membership Plus dues) 48
Search
