1760B 1760/RMS 1760PA/ACdigital multimeter amperometric clamp and digital multi-meter industrial digital multimeter accurate and sturdy, in a 6-mm co-moulded shell, with antislip, shockproof outer rubber part A: AC V: AC/DC Measuring range Base accuracySPECIFICATIONS AC/DC voltage 110mV – 600V ±0.8% - ±2% rdgDC voltage: 200 mV-2/20/200/1000VAC voltage: 2-20/200/700V AC/DC current 110μA – 10A ±1.5% - ±2% rdgDC current: 2/20/200 mA-20 AAC current: 2/200 mA- 20 A Resistance 110Ω – 40MΩ ±1.2% - ±2.5% rdgResistance: 200Ω - 2/20/200 kΩ - 2/20 MΩCapacity: 2/20/200 nF - 2/200 μF Capacity 11nF – 40mF ±5% - ±10% rdg (upTemperature: -20° + 1000°C/ -4 °F ~ +2000°FFrequency: 20kHz to 11mF)Power supply: 1 9V battery (included) Frequency 1100Hz – 110 MHz ±1.2% - ±1.5% SPECIFICATIONS rdg DC voltage 400 mV - 4/40/400/600 V AC voltage 400 mV - 4/40/400/600 V Temperature -32°C – +1000°C ±3% - ±5% rdg AC current 40/400/1000 A Resistance 400Ω - 4/40/400 kΩ - 4/40 MΩ Diode test, 3V DC ±10% rdg Frequency 5/50/500 Hz - 5/50/500 kHz - 5/10 MHz Capacity 40/400 nF - 4/40/100 μF Continuity test <30 Ω - Temperature - 20 °C ÷ 1000 °C / -4 °F ÷ 1832 °F Power supply: 1 9V battery (included)1760B 1 017600012 1760/RMS L 1 017600020 mm 1 0176000501760/OHM 1760PA/AC 190Multimeter/megohmmeter for high voltage 1760PA/80 1760PA/AC-DCinsulation testing. AC/DC amperometric clamp, 80A amperometric clamp and digital multimeterTRUE RMS indicator Designed to measure low current leakage or absorption values on vehicles A: AC/DC V: AC/DC CAT. IV 600V CAT. III 1000V • Range: 1mA-80A AC/DC • Torch function with white LED • Backlit LCD display • Zero setting function • Hold function • Auto power off • Power supply: 2 1.5V AAA-type batteries 1760PA/80 1 017600002Measuring range Base accuracy A: AC/DC V: AC/DCAC/DC voltage: 50mV - 1000V ±0.06% - ±0.1% rdg SPECIFICATIONSAC/DC current: 0.01μA - 10A ±0.5% - ±1% rdg DC voltage: 0.1mV ÷ 600V AC voltage: 0.1mV ÷ 600VResistance: 0.01Ω - 50MΩ ±0.2% - ±2% rdg AC current: 0.01A ÷ 1000A DC current: 0.01A ÷ 1000AMeg OHM: 0.01 - 5000MΩ ±4% rdg. max current Resistance: 0.1Ω ÷ 40MΩ Capacity: 0.001nF ÷ 40 μF1mA Frequency: 0.001kHz ÷ 4kHz Temperature: -40°C ÷ 1000 °CCapacity: 5nF - 10mF ±1.5% - ±3% rdg -40°F ÷ 1832°FFrequency: 50Hz - 100 MHz ±0.02% - ±0.1% rdg 1760PA/AC-DCTemperature: -50 °C - +1350 °C ±0.5% rdgDiode test: 3V dcContinuity test: <30 Ω1760/OHM 1 017600025 1 017600000 151
1760/TC2 1760PT 1760/IR1600combination contact/non-contact digital infrared thermometerdigital tachometer combination voltage and continuity tester, with laser aiming system 12-690V AC/DC 30 130 mm mm Functions: • continuity • phase rotation IP64 • mains testing CATIV - 600V ; • LED torch CATIII - 1000VL L=1 m 230 mm L 6÷690V AC/DC H 1760PT 1 017600150TECHNICAL DATA• For measuring: 1760R/TC2 TECHNICAL DATA- non-contact rotational speed (rpm) set of reflecting tapes for item 1760/TC2 Range: da -50 °C to +1600 °C / -58 °F to +2912 °F- contact rotational (rpm) Scale selection: °C/°Fand linear surface speed (m/min or ft/min). 1760R/TC2 Accuracy: ±1.5% or ±2 °C to 20 °C• 5-digit LCD display. 1 017600561 Laser power: <1mW• Scale: Response: 1sec- non-contact speed 2.5÷99,999 rpm Emissivity: 0.10-1.0 adjustable- contact speed 0.5÷19,999 rpm Distance ratio: (D:S) 50:1- linear surface speed 0.05÷1,999.9 m/min. Operating temperature: 0 °C ÷ 50 °C / 32 °F ÷ 122 °F• Frequency: 0.8 sec. Operating humidity: 10% to 90% RH• Power supply: 4 1.5V batteries, AA size,or 6V power supply unit (not included). Backlit LCD display• Supplied with the following:- adaptor for contact tip measurement; Data storage function- male (contact) rubber tip (2 pcs.);- female (contact) rubber tip (1 pcs.); Auto power off- linear measurement tape (1 pcs.); Power supply: 1 9V battery (included)- reflecting tapes;- instruction manual; Hard case with aluminium tripod- plastic case. Operating manual LH 1760/IR800 1760/IR1600 mm mm 1 017600161 1 017600460 digital infrared thermometer1760/TC2 230 74 with dual laser aiming system1760K 1761non-contact AC voltage detector with LED wire twisting pliersmini-torch with automatic returnTesting range: 200-1000Vac 50/60Hz 95 mmCAT III-1000VRequires 2 AAA batteries (included) 145 L mm CAT III- 180 mm 1000V 1760K 1 017600140152 TECHNICAL DATA L Range: -50 °C to +800 °C / -58 °F to +1472 °F mm Scale selection: °C/°F Accuracy: ±1.0% or ±1.0 °C to 20 °C 255 1 017610101 Laser power: <1mW Response: 150ms 1761RS/1 Emissivity: 0.10-1.0 adjustable reversible wire twisting pliers Distance ratio: (D:S) 20:1 with automatic return Operating temperature: 0 °C ÷ 50 °C / 32 °F ÷ 122 °F Operating humidity: 10% to 90% RH L Backlit LCD display L mm Data storage function 220 1 017610130 Auto power off Power supply: 1 9V battery (included) Soft cloth case (included) Operating manual 1760/IR800 1 017600380
1762 1767PMR 1771revolving punch pliers magnetic tool holder, rectangular utility knife, 18 mm, supplied with 3 blades 365 mm 18 165 mm mm 170 mmØ 1771 10 017710000 1771BM L utility knife, 18 mm, 6 spare blades Ø L mm 2 017620001 mm 210 2-2,5-3 2 017660001 3,5-4-4,5 1 017670010 2 017660005 1767PMR1766 Adouble suction lifter 1770 extra flat utility knife, L 9 mm snap-off blade LA A mm mm 10 017710050 380 mm 1771BM 170 18 L LA 1771RL 10 017700001 mm mm 18 mm snap-off spare blades (10 pieces) 1770 140 9 for utility knives 1771, 1771BM 120 mm 1770A 18 max mm kg utility knife 9 mm with automatic blade locking mechanism, 110 mm50 3 blades1766A A 1771RL single suction cup L 5 017710010 LA 1772R mm mm 10 017700025 utility knife with retractable trapezoidal blade, 1770A 135 9 supplied with 5 blades 120 mm 1770RL A L max 9 mm snap-off blades 10 pieces kg for utility knives 1770 and 1770A30 9 LA mm 5 017700010 mm mm 5 0177200061767PMCmagnetic tool holder, round 85 mm 1772R 125 18 Ø 1770RL 1772H 150 mm 1770BM safety utility knife with retractable blade,1767PMC utility knife, 9 mm, 6 blades supplied with 2 blades A A LA L L mm mm LA 1 017670020 1770BM 140 9 10 017700050 mm mm 5 017720029 1772H 170 18 153
1772RL/2 1777BM 1778D10 long trapezoidal spare blades, in box, for foldaway knife with wire stripping notch, foldaway knife,utility knives, 1772R,1772H,1774,1777BMT, stainless steel blade stainless steel blade and handle,1777T in case 18 A A mm L1 L1 60 mm L L1772RL/2 L L1 A 5 017720017 mm mm mm 5 0177701001773Autility knife, 25 mm 1777BM 190 80 16 1777T L A L1 mm mm mm 5 017780060 foldaway knife with trapezoidal stainless steel blade, 1778D 180 22 78 5 spare blades 1778SCLA foldaway knife with soft carbon look finish, A hardened steel blade, L1 in case L LA L mm mm A1773A 180 25 10 017730000 L11773RL L25 mm blades (10 pieces)for utility knife 1773A L A L1 L A L1 mm mm mm 5 017770030 mm mm mm 25 mm 1777T 160 19 65 1778SCL 180 22 78 125 mm 5 0177800891773RL 1777BMT 1778SAFE 5 017730015 foldaway knife with trapezoidal blade foldaway knife,1774 4 adjustable blade depths hardened steel blade,multi-function scraper with blade guard 4; 9.5; 15.5; 21.5 mm with window breaking hammer, supplied with 3 blades seat belt cutter and knot untying features, in case L L1 A L1 1772RL/2 L L L1 mm mm A 5 017740001 L11774 165 60 L1774A L L1 A L A L1 mm mm mm 5 017770050 mm mm mm 5 017780090multifunction scraper,bi-material handle 1777BMT 170 80 19 1778SAFE 210 25 85 A L 1778CM 1778SOS camouflage foldaway knife, L L1 hardened steel blade, car service knife mm mm 1 017740011 in case with window breaking hammer and seat belt cutter features1774A 300 40 in case1774A/RL A10 blades for multifunction scraper item 1774A L1 18 L A mm L1 1774A/RL L154 40 mm L A L1 L A L1 1 017740511 mm mm mm 5 017780099 mm mm mm 5 017780080 1778CM 195 24 80 1778SOS 205 25 85
1778V18 1783 1812 150 light duty scissors instant heat soldering ironfoldaway knife,aluminium handle • in case A L L1 L mm L 215 5 017830021 240 5 017830024 L A L1 1784mm mm mm 5 017780018 heavy duty scissors195 25 85 L WV 230V L L=1,25 m Euro1778W mm 150 230foldaway knife, stainless steel blade, 175 2 017840017 1814M 1 018120015handle with wooden inserts, 200 2 017840020 soldering ironsin case 250 2 017840025 with steel tips L=1,2 m 300 2 017840030 230V A L1 Schuko L 1 018140225 1800/100 1 018140230 lifting airbags (max. lifting force: 100 kg ) 1 018140240 L A L1 • lifting/levelling WV L=1,25 m mm mm mm 5 017780025 • locking doors 230V 25 2301778W 180 22 78 A 30 230 Shuko 40 2301778X B 1820 1 018200003knives for nautical maintenance, stainless soldering irons 1 018200006steel blades, aluminium handles 1 018200008in case S AB S L mm mm mm 160 150 2÷55 3 018000000 1820 30 L1 L 30WA L = 210mm 1808 1820 60 dual rating soldering iron with steel tips 60W 1824R8 L = 220mm 20/130W L=1,2 m 1820 80 80W 230V L = 260mm Schuko 95 mm L L1 A WV 1822 mm mm mm 2 017780050 1 018080001 high-performance soldering irons 20/130 2301778X 185 85 25 1781 Aslim, long blade scissors 230V Shuko L=1,25 m1781 L L 1822 120 mm 120W 1 018220012 LxA = 250x125 mm 1 018220018 132 2 017810001 1 018220032 1822 180 180W 155 LxA = 250x125mm 1822 320 320W LxA = 250x140mm
1823 60 1827 1830Tdigital soldering station gas soldering iron, adjustable dissoldering pipe with antistatic plastic (PTFE)supplied with soldering iron nozzle • Temperature range: 160 °C ÷ 480 °C with ±1% accuracy. L • Memory mode designed to save the temperature selected 240 mm when switching off the station. L • 3 quick selection keys (200-300-400 °C). mm 190 5 018300021W 1834L/USB60 1 018230060 1827 1 018270001 rechargeable high-brightness LED torch, made of sturdy anodized aluminium, 1827PC up to 450 lumens spare conical tips for item 1827 USB recharged1823R/60 flat battery indicator (appearing when battery charge is downspare soldering iron for item 1823 60 to 20%) battery life: 4h 60W 24V 1827PC/1,6 1827PC/3,2 L 1827PC 1,6 1827PC 3,2 1 018270501 MICRO USB 1 018270502 IPX61823R 60 1827PCL L 1 018230066 spare knife tips for item 1827 mm 1824Rspare tips for soldering irons 220 1 018340075 1827PCL 2,4 1834RB-L/USB 1 018270503 spare battery for item 1834L/USB1824R 08 1827PFL1808 1 018240100 spare naked flame tips for item 18271824R 12 1 0182403011812/150 1 018240152 1827PFL 1824R 14-M25 1 018240153 1 0182705041814M/25 1 0182401541824R 14-M30 1 018240302 1827/K 1834RB-L/USB 1814M/30 1 018240303 1 0183409751824R 14-M40 1 018240304 gas soldering iron with 7 accessories1814M/40 1 018240305 in case with soft polyethylene 1834PS1824R 20 1 018240307 foam base1820/30 1 018240308 high-brightness LED torch,1824R 60 made of sturdy, anodized aluminium,1820/60 up to 300 lumens1824R 801820/801824R 120-1801822/120 -/1801824R 3201822/3201824R ST-601823-601825B • Power: 30 watts to 125 watts • Batteries (not included): 2xAAA (life 9/29 h)soldering tin wire with antioxidant • Tip temperature can be adjusted between • Lumens: 300>100>OFF 250 °C and 500 °C • IPX6• 1 mm²; 250 g • Gas flow regulator• Sn 99.3%; Cu 0.7% • Warm-up time: 15 seconds L • Tank contains gas for 120 minutes' non-stop operation • Clear tank for monitoring gas level • Can be refilled with butane gas 1825B 1827/K L 1 018250251 1 018270100 1 018340310156 mm 150
1834PM 1834RR 1836Ahigh-brightness LED torch, LED torch, LED headlamp, dual brightness, withmade of sturdy, anodized aluminium, rechargeable in cigarette lighter socket contactless ON/OFF sensorup to 350 lumens Adjustable focus • 120/65 lumens• Batteries (not included) : • IP54- 1xAAA (life 11/33 h) Rechargeable in cigarette lighter socket, 10-28V DC- 2xAAA (life 13/39 h) • Batteries: 3xAAA included- 3xAAA (life 15/45 h) IP30• Lumens: 350>40>OFF• Charge indicator 130 lumens• IPX6 L 1836A 1 018360050 L 1834RR 1836B 1 018340520 rechargeable LED headlamp, dual brightness, L with ON/OFF sensormm 1835/1 LED inspection torch, • Contactless ON/OFF sensor140 1 018340320 made of sturdy anodized aluminium • 160 lumens • Life: 3-6 h1834PL 1xAAA battery (not included)high-brightness LED torch, • IP65made of sturdy, anodized aluminium,up to 500 lumens• Batteries (not included) : - 1xAA (life 20/60 h) 1 018360200- 2xAA (life 28/84 h) L 1836B- 3xAA (life 36/108 h)• Lumens: 500>40>OFF L 1837N• Charge indicator mm •IPX6 magnetic, articulated lamp with high- 105 3 018350030 brightness LEDs, L up to 400 lumens 1835/2 L LED inspection torch, • Batteries (not included) :mm made of sturdy anodized aluminium - 1xAA (life 25/69 h) - 2xAA (life 33/96 h)210 2xAAA batteries (not included) - 3xAA (life 43/124 h) • Lumens: 400>40>OFF • Charge indicator • Adjustable focus •IPX6 1 0183403251834PXL Lhigh-brightness LED torch,made of sturdy, anodized aluminium,up to 1350 lumens• Batteries (not included) : 3xD (life 36/108 hr) L L• Lumens: 1350>450>OFF• Charge indicator mm • IPX6 3 018350060 145 L 1837N L L mm 1 018370002mm 450 157315 1 018340330
1837/USB 1838COBrechargeable, magnetic, articulated lamp with rechargeable inspection LED lamphigh-illuminated LEDsmicro USB charger not included • Hangable, with antislip, shockproof rubber body • Lithium polymer battery● Dual brightness: 150/450 lumens • 55/125 lumens● Adjustable focus● Lithium polymer battery ● Charge indicator (green >85%; red <15%)● Battery life 4-8 hours (depending on brightness) 1838/11LED IP65 ● Micro USB charging rechargeable inspection lamp with ultra-high 1838COB 1 018380010IPX6 brightness LEDs, lithium polymer battery L • Compact body made of antislip rubber • Easy-to-replace front glass • Swinging hook • With charging station, 110-230Vac • 320 lumens • With multidirectional head LED 1838RV/11LED 1838P IP65 rechargeable inspection pen light, with double light emission: lamp and torch1837/USB • Compact body made of non-slip rubber 1 018370051 • 50/80 lumens • Pocket hook1837RB/USB • Magnetic base can be rotated 180 degreesspare battery for item 1837/USB • Complete with USB/jack charging cable, 3.5mm • Life: 2.5 hours • IP201837/USB RB 1 0183709011837PLUS 1838/11LED LED spotlight for building yards 1 018380111 • Brightness: 3000 lumens; adjustable (10%; 25%; 50%; 75%; 1838RA/10-11LED 100%) • Power supply: 100-240V AC - 50/60Hz; 26W spare power supplies for items 1838/10LED • impact protection: IK07 and 1838/11LED • cable: 5 m / 3x1 mm² • Dimensions: 235 x 83 x 233 mm 1838RA/10-11LED 1 018380903 IP67 1838RB/10LED spare battery for items 1838/10LED and 1838/11LED 1838RB/10LED 1838P 1 018380902 1 018380005 1838RR/11LED 1 018370026 charging bases for item 1838/11LED1837PLUS 1838RR/11LED 1 018380914 1838RV/11LED spare scratch-proof glass for lamp 1838/11LED 1838RV/11LED 2 018380905158
1838SL 1838UV ultra-thin inspection lamp with rechargeable UV and white light inspection ultra-high brightness LEDs. lamp For jobs in small areas ideal for detecting leaks • power supply: 12V, with lighter socket and battery terminals • Compact body made of antislip rubber • 2.5-m-long cable • With charger 100-240Vac / 50-60Hz • thickness: 6mm • 150 lumens / UV • 345 lumens 1838FLASH Srechargeable, ultracompact spotlight, designedto offer the best possible solution for each use ABUNDANT READY LIGHTING: with a maximum lighting 1838SL capacity of 720 lumens, and running on both battery and 1 018380101 cable, it is always ready to use. CAN BE PLACED ANYWHERE: 1838SLR 1838UV -on flat surfaces: with rubber feet on three sides or 1/4\" drive rechargeable, articulated LED inspection lamp 1 018380150 for stands (camera-like standard) -on metal structures: with unscrewable magnet or hook that compact front LED (200 lumens) and head LED (100 lumens) 1839/R1 can be rotated 360 degrees. for inspections COMPACT: no more than 85x100x155 mm in size, it can be lighting body no more than 9 mm thick transformer with USB output, spare part easily replaced in tool bag and used in small areas. operating range: 5/2.5 hours (depending on light level setting) for items 1834L/USB; 1836B; 1837/USB; STURDY: designed to withstand extremely severe mechanical with USB charger 1838COB stress. Guaranteed durability. with metal hook and magnet IP30 1839/R1 1 018390501IP65 1839/R21838FLASH USB/jack cable 3.5 mm, spare part for items 1836B; 1838P; 1838COB 1839/R2 1 018380300 1 018380201 1 018390502 1838SLR1838RB/FLASH 1838SN 1839/R3spare battery for item 1838/FLASH rechargeable, articulated LED inspection lamp USB/MicroUSB cable, spare part for item • articulated 1834L; 1837/USB • non-slip rubber body • double swinging hook 1839/R3 1 018380930 • magnets on base and back for increased adjustability 1 018390503 • with charger 100-240V / 50-60Hz1838RB/FLASH • double light emission, front and head (spot) • 250 lumens / spot 150 lumens1838LED/120 • operating range: 3h / spot 3h 1840BMLED under bonnet lamp with swivel hook • with charge indicator 230V inspection lamp, ● 5-m-long oil-proof cable IP20 base type: E27 ● 600-lumen LED strip, 7.5W ● Hook opening: 120 ÷ 170 cm ● Bulb not included L E27IP65 230V1838LED/120 1 0183802501838LED/120-AL L=10 mpower supplies with spare cables for item IP201838LED/120 L1838LED/120-AL 1838SN V W mm 1 018380251 1 018380132 1 018400101 1840BM 230 60 420 159
1842LED/BM 1843R/BM 1848Lamp with ultra-high brightness LEDs, 100- spare inspection lamp for cable reels, base240 Vac type E27 automatic cable reel with Schuko type socket• 10-m-long cable • Bulb not included• compact body made of antislip rubber • Crush-resistant rubber cable H07 - 3x1.5 mm² - 15m• easy-to-replace front glass • swinging hook • Max. 1600 W with unwound cable• 340 lumens• with multi-directional head LED light • Max. 1200 W with wound cable IP42 IP65 IP20 L=15 m 1843R/BM 1 018430131 110÷230V 1846LED/BM L Automatic cable reel with LED inspection lamp, 100-240 Vac 1848 1 018480015L=10 m1842LED/BM ● With 230/24V safety transformer IP42 1850B 1 018420301 ● Max. 25 W IP65 heat gun IP421842LED/ABM IP55 - Pos. 1 240 l/min. 300° CLamp with ultra-high brightness LEDs, 12-24V - Pos. 2 450 l/min. 500° CAC/DC • can be used with gun placed vertically on worktop• 10-m-long cable L• compact body made of antislip rubber• easy-to-replace front glass 1600W• swinging hook 300÷500 C°• 320 lumens• with multi-directional head LED light H L=15 m IP65 230V L=2,4 m 1 018460301 Schuko 1846LED/BM IP42 LH 1846LED/ABM IP65 mm mm 1 018500011 Automatic cable reel 1850B 240 190 with LED inspection lamp, IP42 L 12-24V AC/DC IP55 1850C24V heat gun ● Max. 60 WL=10 m - Pos. I 150-250 l/min 50°C - Pos. II 150-500 l/min 50-650°C1842LED/ABM • digital display 1 018420311 • buttons designed to adjust temperature and flow capacity1843BM • can be used with gun placed verticallyautomatic cable reel on a worktopwith 230 Vac inspection lamp, • 4 preset programmes and possibilitybase type E27 and steel protector to customize other programmes● Bulb not included L=15 m - Prog 1 250°C ca. 350 l/min - Prog 2 350°C ca. 400 l/min L - Prog 3 450°C ca. 500 l/min - Prog 4 550°C ca. 400 l/min 2000W 1 018460311 50÷650 C° IP42 1846LED/ABM H IP20 1846R-LED/BM L=2,4 m spare LED lamps 230V 12-24V - AC-DC Schuko L=15 m 1843BM 1846LED/BM R LH 1 018430101 1 018460331 mm mm 1 018500015160 1850C 255 210
1850U... 1852R1750 1852S-Fnozzles for items 1850B and 1850C portable induction heater front attachable coil 1850UB 80 58 mm mm80mm 32 1850UP mm80 80 1850UFmm mm 581850UB 1850 mm1850UF1850UP B-C 14 1850UR1850UR B-C mm B-C C 1 018500100 1 018500101 1 018500102 1 0185001031851VK 1852S-F 19 Ø hot glue gun with 12 thermofusible glue sticks 1852S-F 20 mm 1 018520508in case 1852S-F 23 1 018520509 1852S-F 26 19 1 018520510 1852S-F 32 20 1 018520511 1852S-F 38 23 1 018520512 1852S-F 45 26 1 018520513 32 1 018520514 38 45 1 018520515 1852S-FLESS 1 018520517 flexible coil 1 0185205181851VK - heats and loosens bolts, hubs and bearings without using 320x250x50 mm 1 018510058 flames 1 018520516 - allows any type of ferromagnetic metal to be heated1851VK-12C 1852S-FL 500 Standard equipment: 1852S-FL100012 thermofusible glue sticks - two front attachable coils, Ø 19 and 26 mm, for loosening nuts 1852S-FL1500Ø 11 mm - one flat coil for heating surfaces - one flexible coil, 800 mm long 1852 S-PIATTE - supplied in plastic case flat coil Technical data: 1852S-PIATTE - input voltage: 230V AC, 50/60 Hz1851VK-12C - input current: max. 7,5A 1 018510062 - power: max. 1.75 kW1851VK-12V12 thermofusible glue sticks OPTIONAL EQUIPMENTfor painted surfaces Coils are also available in other sizesØ 11 mm BENEFITS Time saving: quick, extremely accurate heating Fire safety: does not produce flames, maximum operator safety Functional: can be used with one hand, and coils can be easily interchanged FIELDS OF APPLICATION Automotive industry Industrial maintenance Aviation industry Naval industry Petrochemical industry 1852R1750 480x370x130 mm - 4,5 kg 1 0185201751851VK-12V 1852S-L 1 018510072 side attachable coils 1852S-L 19 Ø 1852S-L 20 mm 1 018520501 1852S-L 23 1 018520502 1852S-L 26 19 1 018520503 1852S-L 32 20 1 018520504 1852S-L 38 23 1 018520505 1852S-L 45 26 1 018520506 32 1 018520507 38 45 161
1860 140A 1860RC 1870DC inverter welding machine for MMA and TIG spare cables for inverter welding machines solid and fluid vacuum cleaner, 20 lelectrode steel welding. item 1860Compact and easy to carry • single-stage by-pass motor electrode holder cable length: 2.5m • voltage: 230/240 VArc force, hotstart, anti-sticking and • frequency: 50/60 Hzthermostatic protection features earth cable length: 1.8m • max. power: 1200 W • airflow rate: 58 l/sec.Adjustment current: 5÷140A 1860RC/140A • max. suction power: 190 mbarPower supply:1x230V 1860RC/160A 1 018600604 • max. drum capacity: 20 l, made of antistatic PP 1 018600606 • acoustic emissions: <70 dB(A)Use factor (40 °C) : • cable length: 5 m25% - 140 A 7042LCD • trolley for accessories60% - 100 A STANDARD ACCESSORIES, Ø 36 mm100% - 90 A Auto-darkening LCD mask, for electrode • 1 corrugated hose with ergonomic handleDelayed fuse: 16 A welding; MIG/MAG; TIG and plasma. • 2 hard extension tubesProtection: IP23S Solar cells power supply and lithium batteries • 1 multiuse brush for floors and fluidsUsable electrodes: Ø 1.5- 4mm rutilic, basic, stainless steel, cast for outstanding LCD filter life • 1 flat nozzleiron etc. FILTERING SYSTEMSsupplied with 16mm² cables • 1 surface filter cartridge 1900 cm2 - 12 μm nom. • 1 anti-foam filter PPI 45/PPI 30 ● Viewing area: 98x43 mm IPX4 ● Darkening shade: DIN 9-13, externally adjustable 1870 200 ● UV/IR protection mm ● Light to dark time: 1/25000 s ● Dark to light time: 0.25-1s 130 mm ● Adjustable darkening sensitivity and delay ● Auto on/off ● Grinding feature ● Optimized shape to make it easier to breathe with pulled-down screen 370 mm 1 0187000201860 140A 1872L 1 018600004 solid and fluid vacuum cleaner, 35 l, \"L\" class certified1860 160A • two-stage by-pass motorDC inverter welding machine for MMA and TIG • voltage: 230/240 Velectrode steel welding. • frequency: 50/60 HzCompact and easy to carry • max. power: 1100 W • airflow rate: 55 l/sec.Arc force, hotstart, anti-sticking and • max. suction power: 220 mbarthermostatic protection features • max. drum capacity: 35 l, made of antistatic PE-HD • acoustic emissions: <68 dB(A)Adjustment current: 5÷160A • cable length: 6 mPower supply: 1x230V STANDARD ACCESSORIES, Ø 36 mm • 1 corrugated hose with ergonomic handleUse factor (40 °C) : • 2 plastic extension tubes • 1 combined brush frame30% - 160 A • 1 section with fluid collection hoses •1 flat nozzle60% - 1030 A FILTERING SYSTEMS • 1 disposable fabric bag; filtration class: \"L\" • 1 filter cartridge; IFA class: \"L\" • 1 anti-foam filter PPI 45/PPI 30 • 2 post-filters made of PP-laminated PET 100% - 110 ADelayed fuse: 25 AProtection: IP23SUsable electrodes: Ø 1.5 - 4mm rutilic, basic, stainless steel, castiron etc. 1 070420001Supplied with 25mm² cables 7042LCD 270 7042LCD/RV mm scratch-proof lens protector for item 7042LCD 7042LCD/RV 2 070420101 160 mm 370 mm 7042LCD/RV-INT IPX4 inside lens for item 7042LCD 1872L 1860 160A 1 018600006 7042LCD/RV-INT 162 2 070420102 1 018720135
1873 1874 1870-72/FLsolid and vacuum cleaner, 30 l, solid and fluid vacuum cleaner, 50 l,stainless steel drum stainless steel drum fluid vacuum cleaning filter for items 1870 - 1872 - 1873 - 1874 • two-stage by-pass motor • two-stage by-pass motor • voltage: 230/240 V • voltage: 230/240 V 1870 72/FL • frequency: 50/60 Hz • frequency: 50/60 Hz 1 018700027 • max. power: 1100 W • max. power: 1350 W 1872L 35/FC • airflow rate: 55l/sec. • airflow rate: 55 l/sec. cartridge filter, \"L\" class, • max. suction pressure: 220 mbar • max. suction pressure: 240 mbar for item 1872L 35 • max. drum capacity: 30 l, made of stainless steel • max. drum capacity: 50 l, made of stainless steel • acoustic emissions: <61 dB(A) • acoustic emissions: <63 dB(A) • cable length: 6 m • cable length: 6 m • trolley for accessories • trolley for accessories STANDARD ACCESSORIES, Ø 45 mm STANDARD ACCESSORIES, Ø 45 mm • 1 corrugated hose with ergonomic handle • 1 corrugated hose with ergonomic handle • 2 stainless steel extension tubes • 2 stainless steel extension tubes • 1 industrial brush frame • 1 industrial brush frame • 1 industrial section for carpets • 1 industrial section for carpets • 1 industrial section with fluid collection hoses • 1 industrial section with fluid collection hoses • 1 flat nozzle • 1 flat nozzle FILTERING SYSTEMS FILTERING SYSTEMS • 1 filter paper bag • 1 filter paper bag • 1 surface filter cartridge 1900 cm2, 12 μm nom. • 1 surface filter cartridge 5200 cm2, 12 μm nom. • 1 anti-foam filter PPI 45/PPI 30 • 1 anti-foam filter PPI 45/PPI 30 1872L 35/FC 1 018720144 1872L 35/5S 5 disposable fabric bags, \"L\" class 1872L 35/5S 1 018720136 1874 50 1873-30/5S 1 018730030 1 018740050 5 vertical paper bags for item 18731873 30 1870-20/5S 5 horizontal paper bags for item 1870 1873 30/5S 1 018700021 1 018730031 1870 20/5S 1870-72 /FC 1874-50/5S 5 vertical paper bags for item 1874 cartridge filter 1900 cm² 12 - μm nom. for items 1870 - 1872 - 1873 1870-72 /FC 1874 50/5S 1 018700026 1 018740051 163
1874-50/FC 1881 1889 pneumatic barrel pump, ratio 3:1 steel handling and storage basecartridge filter 5200 cm² - 12 μm nom. for 2 200-l barrelsfor item 1874 • Completely hot painted with epoxy powder • Easy to carry with a fork lift truck or a transpallet • Support cannot be placed under any part 740 mm1874 50/FC 1 0187400561879 330 mm 1210 mm9.5 l manual/pneumatic operation fluidextractor 1881 l/min 1 018810001 14 1 018890200 1889 1882 1895 6 oil gun with flexible end and automatic drip ultrasonic cleaning tank, catcher 6l • 1/2\" with special degas function • Maximum delivery rate: 65 l/min • Maximum operating pressure: 100 bar • Lockable delivery lever 440 mm Ø 1/2\" 230 mm 14 mm 1895 6 1879 1 018790001 1 018820010 1 018950060 18821879R/K4kit of 4 spare tubes for fluid extractor 1879 1883 digital litre counter for oil 2250-O • 1/2\" heavy duty swivel creeper seat with tray • Shockproof rubber coating • Battery: 1 CR2 (included) 410 ÷ 530 mm • Max. delivery rate: 0÷35 l/min 380 mm 1 018790504 (0÷9 gal/min)1879R/K4 • Max. pressure: 50 bar (750 psi) • Viscosity: 8÷5000 mPas • Tolerance: ±0.5% Ø 1/2\"1880 2250-O manual barrel pump 1 022500011 2251-O heavy duty swivel creeper seat with drawers 1883 1 018830035 1883NC male-male nipple, 1/2, 410 ÷ 530 mm for items 1882 and 1883 380 mm gr 2251-O 1 018800001 1 018830135 1 022510011 1880 240 1883NC164
2252 3027 10 3027 50seat with castors hydraulic bench press with moving piston hydraulic press with moving piston and hoist2252 O Maximum capacity: 10 t Maximum capacity: 50 t2252 G2252 R 38 cm 40 1250 45 cm mm cm 2200 1 022520001 mm 1 0225200022252-O 1 022520003 820 mm2252-G2252-R 3027 10 90 kg 1 0302700102252KR4spare seat castors 3027 20 1250 mm hydraulic press with moving piston2252KR4 20 t2254T Maximum capacity: 20 tkneeling pad made from non-slip EVA foam 3027 50 350 kg 1 030270050 1905 1 022520900 mm 3027/KP set of pin punches and plate for press item 3027 950 mm30 mm 3027 20 140 kg 1 030270020 290 mm 470 mm 3027 30 hydraulic press with moving piston and hoist 1 0302705102254T 3027/KP10 3027 10 1 030270520 1 022540047 Maximum capacity: 30 t 3027/KP20 3027 20 1 030270530 3027/KP30 3027 30 1 030270550 3027/KP50 3027 502258-O 3027/KPP50heavy duty creeper with tool chest pedal control for hydraulic press item 3027 20-30-50 1980 mm 475 mm 450 mm 355 mm2258-O 1150 mm 3027 30 1 022580011 230 kg 1 030270030 3027/KPP50 1 030270555 165
VEHICLE REPAIR166
83 437U/09half-moon ring wrenches assortment for repairing damaged threads M5-M6-M8-M10-M12 88/S7 8x10-12x14-13x15-16x18- 1 000880107 17x19-21x23-22x24 mm LISO 3318 L 437C 25 x M5, M6, M8, M10 mm mm 3 000830008 set for repairing damaged spark plug 10 x M12 1 004370550 3 000830010 threads, M14x1.25 mm8x10 126 3 000830011 437U/0910x12 137 3 000830014 • Helicoids height: 8.40 - 12.40 - 16.40 mm (5 pcs/size) M5X0,811x13 138 2 000830015 M6X1,014x17 183 2 000830016 M8X1,2515x17 184 2 000830019 M10X1,516x18 196 M12X1,7519x22 231 370x230x55 mm - 2 Kg 437U/E-M… stainless steel helicoids83/S3 H 11x13-14x17-19x22 mm 1 000830081 1 004370100 mm 1 00437055583/S5 1 000830085 1 00437055610x12-11x13-15x17 M5 7.5 1 00437055816x18-19x22 mm 437C M6 9 1 004370560 M8 12 1 00437056283AS 437C/... M10 15half-moon ring wrenches stainless steel helicoids for item 437C M12 18 Prices refer to 25 pieces (10 for size M12 ) H 437U/PM bits and taps for item 437U/09 L H mm 1 004370108 L 1 004370112 \" mm 2 000830111 8.4 1 004370116 M5 1 004370565 2 000830114 12.4 M6 1 0043705667/16x1/2 138 2 000830119 16.4 M8 1 004370568 183 M10 1 0043705709/16x5/8 230 The prices shown are for 10 pieces M12 1 0043705723/4x7/8 437K/8 tool assortment for repairing 437C/RM14 axle shaft threads male thread for spark plugs M14x1.25 • Allows original thread to be rectified and dressed.83AS/3 437C/RM14 Kit contents:7/16x1/2-9/16x5/8 1 000830181 1 004370124 • Metric sizes:3/4x7/8 20x1.25 - 20x1.5 - 22x1.00 - 22x1.5 - 24x1.5 - 24x2.00 • Inch sizes: 3/4x20 - 13/16x2088double ended flat ring wrenches, extra-longseries L L 32 mm mm mm 2 000880008 1 004370020 2 000880012 437K/88x10 235 2 000880013 200x110x30 mm 16712x14 330 2 00088001613x15 330 2 00088001716x18 405 2 00088002117x19 405 2 00088002221x23 43522x24 435
437K/16 720TC tool assortment for repairing impact torsion bars, coloured,damaged threads on brake caliper brackets for motor vehicle wheel nuts,M9x1.25 with 1/2\" male and female square drives 720LC/S5 L 17-19-21-22-24 mm 1 007200645 720IC L Nm mm spare coloured polymeric inserts for impact sockets 720LC-720LCL 90 200 100 200437K/16 110 200 210x150x50 mm 1 004370016 120 200 1 007200769 135 200 1 007200770 1 007200771 1 007200772 1 007200773437K/33 720IC 17 tool assortment for repairing 720IC 19 mm 1 007200687damaged spark plug threads 720IC 21 1 007200689 720IC 22 17 1 007200691Bushes: 720IC 24 1 007200692M8x1.0 - M10x1.0 - M10x1.25 - M12x1.25 19 1 007200694Taps:M8x1.0 - M10x1.0 - M10x1.25 - M12x1.0 - M12x1.25 - M14x1.25 21 22 24 720LCL 720TC/S5 90-100-110-120-135 Nm 1 007200779 wheel nut impact sockets 260x50x175 mm - 1,35 kg with coloured polymeric inserts, 955 long series tubular spark-plug wrench D chrome-plated, hexagon end 150 mm437K/33 Ø 210x150x50 mm 1 004370133 mm mm 1 007200737 1 007200739 17 26,5 1 007200741 19 28,5 21 30,3 720LC L wheel nut impact sockets, with coloured polymeric inserts D D DL mm - \" mm mm 3 009550016 85 mm 3 009550021 16 21 86Ø mm mm 1 007200753 5/8 20,8 29 8617 26,5 13/1619 28,5 720LCL/C3 956C21 30,3 2 007200637 17-19-21 mm 1/2” square drive spark plug sockets 2 007200639 210x50x150 mm - 1,65 kg chrome-plated, hexagon ends22 32,4 2 007200641 2 007200642 24 34,6 2 007200644 Ø 720MRC impact socket with polymeric insert for Mercedes wheel screw L ISO 11168 3 009560008 D ØL 3 009560010 mm - \" mm mm 3 009560011 L 3 009560012 14 18,8 70 720LC/C3 Ø L 9/16 17-19-21 mm 1 007200653 16 21,4 70 148x132x44 mm - 860 g 5/8 mm mm mm 17,8 23,6 70168 1 007200631 11/16 17 27 85 1/2 20,8 27,0 70 13/16
956E 959 960BT 3/8” square drive spark plug sockets T-handle spark plug wrenches sockets for injector electrical connections chrome-plated, hexagon ends with swivelling sockets, standard series L 90° Ø Ø L 50°ISO 11168 Ø L 1 009600125 Ø L Ø L mm mm mm 1 009600127mm - \" mm mm 1 009600129 ISO 11168 25 37,0 78 1 00960013014 18,8 70 27 39,7 789/16 ØL 29 42,0 7816 21,4 70 3 009560018 mm - \" mm mm 30 43,0 785/8 3 00956002017,8 23,6 70 3 009560021 14 18,8 483 960BT/B11/16 3 009560022 9/16 3 009590009 sockets for injector electrical connections20,8 27,0 70 16 21,4 483 3 00959001013/16 5/8 3 009590011 20,8 27,0 527 13/16 L 956F3/8\" square drive spark plug sockets Ø 959RØ rubber inset and spare spring ØL for items 956C - 956E - 957 - 959 mm -\" mm mm Ø L 14 18,8 70 1 009600128 9/16 mm mm mm 16 20,5 70 29 38,5 77 5/8 L 959R/14 3 009590223 956C/14-956E/14 3 009590224 960F 1 009560114 959R/16 3 009590225 socket for nozzle holder ring nuts 1 009560116 956C/16-956E/16 3 009590226 957/16-959/16 959R/17,8 956C/17,8-956E/17,8 959R/20,8 956C/20,8-956E/20,8 957/20,8-959/20,8-959L956L Ø Ø1 2 11/2” square drive spark plug sockets, 960bi-hex ends, long series 1/2” square drive socket for Diesel engine injectors 70 mmØ L Ø Ø Ø1 1 2 ØL mm mm mm mm mm - \" mm mm 2 009560214 28,3 22 32 22 1 009600148 14 20,2 250 2 009560216 9/16 2 009560217 L 960G 16 24,0 250 2 009560221 5/8 Ø L socket for Diesel engine injectors 17,8 24,0 250 2 009600027 of Mercedes-Benz trucks 11/16 mm mm mm 20,8 28,5 250 13/16 27 36,5 77 960A L 1/2” square drive socket957 for Diesel engine injectors Ø Ø1 T-handle spark plug wrenches with swivelling sockets Ø Ø1 L Ø mm mm mm mm 1 009600151 90° 28,5 22 32 12235° L 960L socket Ø L for nozzle holder ring nuts 2 009600017 mm mm mm 27 36,5 77 Ø Ø1Ø LISO 11168 Ø L Lmm - \" mm mm 3 009570000 3 009570001 Ø Ø1 L 16 21,4 275 1 009600153 mm mm mm5/8 27,0 27520,8 30 22 12213/16 169
960M 960/22EP 960CMB socket double head swivel socket wrench for nozzle holder ring nuts for Lambda probes instrument for controlling compression on petrol engines Double hexagon/bi-hex and 180° joint result in remarkable Ø Ø1 versatility L Ø Ø1 L mm mm mm 1 00960015428,5 22 72960H/C4 Lset of sockets for nozzle holder ring nuts L Bar mm mm mm 1 009600052 1 009600250 4÷17 300 22 22 440x370x100 mm - 2,2 kg 960M 960L 960AVE 960CMB/R2960F 960G spare cards for item 960CMB device for testing common rail diesel electrical injectors 1 009600152960H/C4 960S 960CMB/R2 1/2” square drive socket 1 009600252 for Diesel engine injectors 960CMDØ instrument for controlling compression on Diesel engines LØ L 1 009600022mm mm mm22 30 82 960SL 960AVE 430x310x50 mm - 2,0 kg 1 009600245 sockets for Lambda probeswith 1/2” female square drivesØ L 960K/AVE2 kit of adaptors for item 960AVE Ø 2 009600085 mm 2 009600110 33960SL85 22xL= 85 mm960SL110 33 (included in item 960AVE) 22xL= 110 mm Bar 1 009600270 8÷40 440x370x100 mm - 2,4 kg960SN 960CMD/R1Diesel engine glow plug wrenches spare cards for item 960CMD LØ Ø L mm mm mm 2 009600834 2 0096008358 12,0 1/4 60 2 0096008369 13,3 1/4 60 2 00960083710 14,5 3/8 70 2 009600838 11 15,8 3/8 70 960AVE2/K 1 009600249 250x150x30 mm - 523 g 12 17,0 3/8 70 960CMD/R1 1 009600271170
960EPC 960KC-M8/M9/M10 960PSet of tools for removing glow plug electrode assortment of tools for removing broken or damaged glow plugs pressure/depressure tester with accessories and adaptors • For spark plugs with threads M8-M9-M10 960P 350x320x95 mm - 1,9 kg 1 009600777 ZONA DI ROTTURA960EPC 960KC-M8/9/10 960PI 270x230x80 mm - 900 g 1 009600790 380x290x50 mm - 2,3 kg 1 009600801 assortment of reamers for cleaning injector seats960E-PI/P 960KPC in plastic caseinjector washer extractor reversible impulse extractor with adjustable torque for glow plugs For removing residues from injector seats• Male thread M10 for usewith sliding hammer (Beta 1540) Torque can be adjusted in 4 positions: - Flat reamer, Ø 19 - 15 mm, for universal injectors 10-20-30-40 Nm - Flat reamer, Ø 17 - 17 mm, for Delphi/Bosch injectors (BMW/ PSA/Renault/Ford) - Flat reamer, Ø 19 - 17 mm, for Bosch injectors (Mercedes CDI). - Angled reamer, Ø 21 - 17 mm, for Fiat/Iveco injectors. - Handle mm960E-PI/P Ø 300x90x60 mm 1 009600706 1 009600215 960PI 250x130x50 mm - 600 g 1 009600780 960KPC960KC-M8 8-9-10-11-12 mmassortment of tools for removing broken or 420x185x60 mm - 2,8 kgdamaged glow plugs M8 960UC• For glow plugs with thread M8x1.0 mm• Allows broken glow plugs stuck in head to be easily tool set for removing stuck M8-M9-M10 glowremoved plugs with deformed tips960KC-M8 400x300x60 mm - 1,5 kg 1 009600800 960UC 1 009600900 171
960PI/P 961Dassortment of 14 special tools and reamers Digital electronic videoscope with 5.5 mmfor cleaning injector seats probe • Allows individual still images and video clips to be recorded and played back directly on tool 960PMC Diesel injector test and calibrating hand pumpAssortment contents: 360 • Probe with head Ø 5.5 mm and length 90 cm• 3 flat reamers, ø 19/15 mm - ø 17/17 mm - ø 19/17 mm mm • LCD TFT display, 7\" (18 cm), with resolution 800x480• 2 angled reamers, ø 21/17 mm - ø 17/17 mm • digital camera with front and side view• injector washer pulling tool • \"Cfast\"-type probe connection• cutter cleaning brushes • image repetition frequency: 15 frames per second• injector cleaning brush • 2x digital zoom• handle and cutter accessories • micro-USB connector for uploading images • micro-HDMI video output960PI/P • Micro-SD card input 373x280x61 mm - 2,5 kg 1 009600216 • Micro-USB input • power supply allows unit to be used while battery is charging Bar Max. • microphone and speaker for adding and listening to voice 1 009600200 annotations while recording/playing back 400 • Wi-Fi connection960PI/Skit for cleaning injector seats 960AVL 961D vapour extractor 400x340x85 mm - 2,6 kg 1 009610500Kit contents:• 3 steel brushes, Ø 18, 22, 25 mm, for cleaning injector seats 961D/CF3,8• 2 brushes, Ø 14 and 16 mm, for cleaning injector seat bottoms• 6 caps for closing hole connecting with combustion chamber 1-m probe with 3.8-mm front camera• 1 brush for cleaning hole connecting with combustion chamber for videoscope item 961D• 1 flexible bit holder with handle 370 mm 375 961D/CF3,8 mm 1 009610511 400 961D/DC8,5 mm 1-m probe with dual UV camera for videoscope item 961D960PI/S Bar Max. Ø 8,5 mm 360x140x50 mm - 700 g 1 009600214 1 009600210 6 1 009610513 961D/DC8,5960RPI 960AD/TP2blowing tool for injectors seat cleaning set of adaptors for item 960TPfor M8x1 - M9x1 - M10x1 - M10x1.25 glow plugs in plastic case 960AD/TP2 1 009600940 430x310x50 mm - 3,2 kg 1 009600510 960RPI172
961P6 964 969B pry bar with pointed and leverage ends hub nut locking socketelectronic videoscopewith flexible probe A L LA mm mm 5 009640001 400 46 Ø 965 L pry bars with flat curved ends Ø L 1 009690124 mm mm mm 1 009690127 1 009690130 24 36,0 76 1 009690131 27 36,0 76 1 009690132 L1 30 40,0 76 1 009690134• Supports SD cards (8 GB) A 31 42,0 76 1 009690135• Supports flash memories (8 GB) 32 42,5 76 1 009690136• Internal memory: 128M L 34 45,0 76• TV-OUT feature 35 46,0 76• Supports video formats (MP4, AVI, 3GP) L A L1 36 49,0 76• 4 LEDs mm mm mm• Power supplied by USB port (built-in battery) 969/C5 300 16 185 2 009650013 set of 5 hub nut locking socketsSPECIFICATIONS 450 20 312 2 009650014 in plastic case• Sensor pixels: 640x480 600 20 462 2 009650016• Maximum resolution: 320x240 • Probe length: 1 m• Camera diameter: 6 mm• Video formats: MPEG4, 3GP, AVI,ASF.• Photo formats: JPEG• Shooting angle: 0÷180°• Data output: USB cable and SD card• Power supply: 3.7V 2000 mAh battery961P6 1 009610000961P6/S 965/S3 flexible probes, 6 mm 1 009650019 L 966/C3 set of 3 levers with articulated, flat, curved heads 1 009690201 969/C5 30-32-34-35-36 969B L 970EA mm 1 009610262 impact sockets for axle nuts 1 009610263961P6/S2 2000 961P6/S3 3000 L962 Ø tyre levers A 966/C3 LA L=200-250-300 mm 1 009660103mm mm 355x140x65 mm - 1,8 kg L 5 009620003300 21 5 009620004 720LS400 25 3 009620005 impact sockets, Ø 500 27 3 009620006 1 009700398600 27 long, slim series mm mm mm 98 36 122963 Ø Ø1pry bar with pointed and flat bent ends A L 2 007200386 L UNI/ISO 2725 LAmm mm Ø L Ø1 5 009630001 mm mm mm mm400 23 720LS 36 36 48,0 78 29 173
970EB 970OT 971/C8impact sockets for axle nuts oval impact sockets for locking trailer hub nuts torque screwdriver with accessories L1 for controlled tightening of tyre valves with pressure control system Ø L Ø 1 009700595mm mm mm 1 00970041095 36 126110 36 133 970Q L L1 971/C8 impact sockets for rectangular nuts 1 009700165 1 009710108 mm mm - 1 009700180 65 61 3/4\" 1 009700196 80 73 3/4\" 1 009700211 1,2÷6 Nm L 583/6 96 90 3/4\" 111 104 41 mm 892/0 T10-T15-T20 862TX 11-12 mm 900L 986 78 971TSP 978 - 979 tyre pressure sensor tool four-way hexagon wheel nut wrenches L mm 1 009700756 1 00970076056 3/4\"60 3/4\" 970B socket for locking Fiat Daily hub nuts 375 mm SPECIFICATIONS Ø • reading of TPMS sensor information, including: sensor ID inflation pressure UNI/ISO 6788 DIN 3119 temperature L battery state • sensor activationØ L • universal sensor programming 1 009700010mm mm mm The tool has a database which supports repair operations,65 88 75 including: • driving torques • codes of original spare parts and compatible universal sensors 978 2 009780001 17x19x21x22 mm 2 009790001970C 979octagonal impact sockets for locking hub nuts 17x19x22x1/2 mm 971TSP 982 63x142x30 mm 1 009710025 four-way hexagon wheel nut wrench 700 mm UNI/ISO 6788 DIN 3119 mm - 1 009700808 24x27x32x3/4 mm 1 009820001 1 009700815 80 41 mm 1 009700820 95 3/4\" 1 009700829 100 3/4\" 1 009700835 109 41 mm 1 009700840 115 3/4\" 120 41 mm174
984 986 48 988/K4wheel nut plastic cap pliers tyre valve screwdriver, set of 4 scratchproof plastic flat chisels short model automatic valve retentionH L L L1 LH Amm mm 988/K4 195 4 1 009840005 A= 19-21-25-38 mm 1 009880104985/B7 L L1 989assortment of 7 guide pins mm mm 1 009860048 wheel balancing weight toolfor wheel installation 18 48Included sizes:• M12X1.25 male 986 78• M12x1.25 female tyre valve screwdriver• M12x1.5 male• M12x1.5 female automatic valve retention• M14x1.25 male• M14x1.5 male• M16x1.5 male L L L1 2 009890001 L mm 1 013020001 250 985/B7 L L1 1302 1 013030001 1 009850007 mm mm double end dolly, round, convex pein head 18 78 135 mm 987985M tyre valve lever male guide pins for wheel installation with rubber protection 1 009860078 g 770 L 1303 curved dolly L 137 mm 985M M12X1,25 L L g985M M12X1,50 mm 1 009850101 mm 985M M14X1,25 1 009850102 1350985M M14X1,50 150 1 009850103 310 1 009870001985M M16X1,50 150 1 009850104 1304 150 1 009850105 987P sole dolly 150 tyre valve lever 150 made of plastic985F Handle accommodates screwdriver to work onfemale guide pins for wheel installation mechanism inside valve 107 mm LL985F M12X1,25 L L 985F M12X1,50 mm 1 009850106 1 009870011 1 013040001 1 009850107 mm g 150 175 150 335 875
1305 1309 1326toe dolly hatchet dolly curved angle spoon 118 mm 260 mm 122 mm g 1 013090001 1 013260001 g 460 g 560 13101190 general purpose dolly 1 0130500011305Zmilled toe dolly 1327 heavy-duty spoon 122 mm 76 mm 385 mm g 1 013100001 1 013270001 g 1225 1075 1312 anvil dolly 1328 g 1 013050002 pry and bumping spoon1065 100 mm1306heel dolly 280 mm 82 mm g 1 013120001 g 1 013280001 1220 935 g 1 013060001 1313 13291040 buffer dolly double-ended spoon1307 68 mmregular dolly 90 mm 435 mm g g 1 013290001 g1100 990 1 013130001 18001308 1314egg dolly double end dolly, convex, flat head 1 013070001 1330 long double-ended spoon 56 mm 115 mm 510 mm g 1 013080001 1 013140001 1 013300001 g g 1100 760 2125176
1331 1338R9 - 1338R12 1344bending iron with leather face spare body blades for item 1338A-B feeler gauges for car body repair shops, pair, 10-bladed, with suction cup 410 mm 1338R9 /1” suitable for: 1338R12 2 013380004 • fitting rear windows 9 2 013380005 • maintaining position during installation g 12 1100 1342 1344 1 013440010 1 013310001 extra flat chisel with straight cutter1335BM 1345bumping blade 26 L 7 hammer with round,with plastic handle mm mm convex face and pein, wooden shaft L 160 mm mm 5 013420001 40 mm 235 L 320 375 mm 1342PM mm extra flat chisel with straight cutter g with hand guard 1345 2 013450010500 2 013350010 L1 1351 L hammer with round,1337/S5 flat face and ball pein, wooden shaftset of 5 stopping knives for car repairers, made of stainless steel 2 013420002Japanese type(25-50-75-100-125 mm) L L1 mm mm 235 118 1342PMR spare hand guard for item 1342 L L 1 013370015 mm25-50-75-100-1251338A - 1338B 160 mmadjustable body blade holder 1342PMR 40with flexible flat blades 1 013420003 mm 1343 flat chisel with side cutter L 320 mm L 26 L 11 mm mm 1351 2 013510010 L 2 013380001 46 mm 1353 /1” mm 2 013380002 5 013430001 hammer with round, L flat face and point pein, wooden shaft mm 2001338A 9 3601338B 12 3601338 135 mmbody blade holder for item 1338R 40 mm L 320 mm 1338 2 013380003 1353 2 013530010 177
1357Z/45 1365/K13 1366KFhammers with flat, round, oil pressure pump, 10 t, and bodyworkmilled face and square, accessories kit kit of 19 plastic glue tabssmooth face, wooden shafts in trolley for item 1366A 102 mm 40 Kit contents: 1366KF mm • oil pressure pump, 10 t, with 1.5-m-long hose, 1/2\" coupling 1 013660205 34x37 • piston mm • wing opening pliers; capacity: 500 kg 2 013570045 • baseplate, 150x90 mm L • L-shaped base, 50x50 mm 280 • 4-point punch mm • round, knurled punch, Ø 50 mm • wedge-shaped punch, 43 mm1357Z/45 • 240-mm-long extension • 450-mm-long extension1359T • 475-mm-long extensionhammer with round, • rubber headflat face and horizontal pein, • male-to-male coupling for installing accessorieswooden shaft 1366/K5 pneumatic dent puller, with 1.1 kg hammer face Kit contents: • 1 suction cup Ø 75 mm • 1 suction cup Ø 100 mm • 1 suction cup Ø 125 mm • 1 hook 32 110 mm mm 1 013650013 27 L mm280mm 1365/K13 900x420x180 mm1359 T 1365P10 1366/K5 2 013590010 oil pressure pump 610x240x90 mm 1 013660010 1.5-m-long hose, 1/2\" coupling 1367/S6 set of punches for installing1360/K6 parking sensorsaluminium hammer with flat, round face,interchangeable plastic pins and punch sizes: 17 - 18 - 19- 20 - 21 - 22 mmsupplied with:• 4 plastic pins• 1 punch, adjustable in 2 different lengths, applicable to hammer Ø L 1 013650110 1365P10 LØ 1366A 1367/S6 mm mm 1 013600006 1 013670100 dent puller 1367320 34 with kit of 19 plastic glue tabs punches for installing parking sensors1362 ideal for removing:dent reflector • hail dentswith suction cup • dents caused by doors • small dents in generalallows even the smallestbodywork imperfections to be detected LxH 1366A Ø Ø mm 1 013620010 1 013660200 mm 1362 240 x200 17 1 013670117 18 1 013670118178 19 1 013670119 20 1 013670120 21 1 013670121 22 1 013670122
1368 1368G/C2U 1437/C12plastic repair kit concave angle clips for item 1368 assortment of 12 tools for removing air bags• Allows cracked and broken plastic parts to be quickly fixed 1368G/C2U The prices shown are for 100 pieces 1 013680130Power supply: 220÷240 V with Schuko socketHeat gun cable length: 3.5 mPower supply cable length: 1.35 m2 power adjustments: 35-75 WHeat gun with brass terminals, 2 staple insertion angles:0°-90°Input protection: thermal circuit breakerOutput protection: 10 A fuseMetal gun pocket 1369/C11 assortment of 11 tools 1437/C12 260x160x55 mm - 1,0 kg 1 014370001 1438 universal clutch aligner complete with 3 expansion mandrels1368 1 0136800011368G/K400assortment of 400 clips 1369/C11 for item 1368 1 013690033 13031368G/K400 1305 1 013680140 1306 13091368G/OD 1310corrugated clips, straight, for item 1368 1314 1327 1338A 1353 1357Z/40 1390 470x340x70 mm - 15,2 kg 1438 1 014380001 1438R 1428L spare expansion mandrels 1 013680100 for item 1438 socket pullers, long series, for damaged right- hand nuts, with square drive1368G/OD The prices shown are for 100 pieces 120 mm1368G/SD Øspiral clips, straight, for item 1368 Ø mm 1 014280217 mm 5 014380101 1 014280219 5 014380102 17 1 014280221 14÷18 5 014380103 19 21 18÷21 22÷251368G/SD 1438DSGThe prices shown are for 100 pieces 1 013680110 lever for locking/unlocking DSG dual-clutch1368G/CV gearboxconvex angle clips for item 1368 from VAG group1368G/CV 1428L/B3 The prices shown are for 100 pieces 1 013680120 17-19-21 mm 1 014280303 1 014380200 1438DSG 179
1438 SAC 1445/1 - 1445/2 1455SVPSAC clutch aligning kit piston ring expanders pneumatic valve grinderincludes kit for applications without guide bearings • Pressure: 6 barssupplied with 3 and 4 arm plates 90 mm 250 mm 1445/1 Ø ØØ 1445/2 Ø mm 1 014450001 39 mm 34 mm 22 mm 1 014550001 1 014450002 50÷100 1455SVP 90÷150 1450GC 1455SVP/R... 1 014380050 spare parts for item 1455SVP valve spring compressor with straight and offset jaws1438 SAC 205 mm 480x380x130 mm - 9,5 kg1439/K7 45÷225 mmangular screwdriver (90°), long series,with blades, in case ØØ Ø 300 22 mm 34 mm 39 mm mm 1455SVP/R1 1455SVP/R2 1455SVP/R3 1455SVP/R1 1455SVP/R2 5 014550501 1455SVP/R3 5 014550502 5 014550503 1450GC 1458 1 014500005 external butt-ended circlip pliers Case contents: 1452K- Angular screwdriver- 1 slotted screw head valve spring compressor,- 1 1/4\" bit head with three flanges- Special blade head- 7 special blades 200 mm 1 0143901011439K7 DIN 5417 500x120x60 mm 825 g 235 mm 2 0145800011440/... Ø mmpiston ring compressors 1452K 30÷100 1 014600010 ØØ 1460F 30 mm 21 mm valve seat removing tool Ø 38 mm 75÷190 mm 270 mm 1 014520100 270 mm 1452PN/K 1460F pneumatic tool for engine valve springs Thrust pressure: 1400 N L L Ø L1 Ø mm mm 1 014400000 1440/0 1 014400010 Ø L L11440/1 40÷75 50 1 014400011 mm mm 1 0145201101440/1A 57÷125 80 1 014400020 mm1440/2 57÷125 100 1 014400021 230 1851440/2A 90÷175 80 1 014400030 16-19-231440/3 90÷175 100 90÷175 165 25-30-42180
1461/C3B 1461/C6G 1461/C8Gtiming devices for timing devices for timing devices for Ford/Mazda diesel enginesFiat/Alfa/Lancia petrol engines Peugeot/Citroën diesel engines Engines: 1.4-1.6-1.8-2.0-2.2 TDCi, 1.6D 8/16V, 1.8D,Engines: 1.2-1.4 16V Engines: 1.4-1.6-2.0D,1.4-1.6TDCI, 1.4-1.6-2.0-2.2Hdi, 1.8D Turbo, 1.8 TCi, 1.8 TDDi, 2.5D, 2.5D Turbo 1.5-1.9-2.5D1461/C3B 1461/C8G 280x245x75 mm 1,5 kg 1 014610032 1 014610064 280x245x75 mm 2,2 kg 1 014610084 1461/C6G 385x290x100 mm 3,8 kg1461/C5G 1461/C7B 1461/C9Btiming devices for Fiat/Alfa/Lancia/Opel/ timing devices for timing devices for Opel petrol enginesSuzuki/Ford Renault/Nissan petrol enginesdiesel engines Engines: 1.0 12V, 1.0-1.2-1.4 16V Engines: 1.4-1.6-1.8-2.0 16VEngines: 1.3 Multijet1461/C5G 1461/C9B 280x245x75 mm 2,6 kg 1 014610053 1 014610072 335x145x60 mm 2 kg 1 014610092 1461/C7B 280x245x75 mm 3,2 kg1461/C6B 1461/C8B 1461/C10Atiming devices for timing devices for Ford petrol engines timing devices forPeugeot/Citroën petrol engines Audi, Seat, Skoda and Volkswagen enginesEngines: 1.0-1.1-1.4-1.6-1.6 16v-1.6Gti-1.6 18V-1.8-1.8 16v-1.9- Engines: 1.9 - 2.0 TDI2.0-2.0 16v-2.0T-2.0 Hpi-2.2 16v Engines: 1.25-1.4-1.6-1.6 SCTi-1.6 Ti-VCT-1.6 16V1461/C6B 1461/C8B 1461/C10A 310x290x120 mm 3,5 kg 1 014610063 240x210x50 mm 1,8 kg 1 014610083 270x120x45 mm - 1,1 kg 1 014610101 181
1461/C10G 1461/C13Btiming devices for timing devices for Fiat 1.4 Multiair enginesVolkswagen/Audi/Seat and Skoda enginesEngines: 1.2-1.6-2.0 TDI CR (common rail) 1461/C12A timing devices for Fiat engines Engines: 1.9-2.2 JTS and 1.9 JTD Euro 4 1461/C13B 240x210x50 mm 2,8 kg 1 0146101341461/C10G 1461/C16 310x290x120 mm 2,8 kg 1 014610103 1 014610123 timing devices for BMW 2.0-3.0 diesel engines1461/C11A 1461/C12A complete with pump pullertiming devices for 280x245x75 mm - 1,8 kgRenault engines Engines: 2.0-3.0 dieselEngines: 2.0 dCi 1461/C12G 1461/C16 timing devices for 335x145x60 mm - 4,3 kg 1 0146101601461/C11A Fiat/Alfa/Lancia diesel engines 420x280x60 mm - 1,2 kg Engines: 1.9 JTD, 1.6-1.9-2.0 Multijet1461/C11Gtiming devices for Renault engines 1 014610111Engines: 1.5-1.9-2.2-2.5 DCI 1461/C171461/C11G timing devices for 310x290x120 mm 3,8 kg Volkswagen, Seat and Skoda engines Engines: 1.2 6-12V 1461/C12G 280x245x75 mm 2 kg 1 014610124 1461/C13A 1 014610170 timing devices for Fiat 0.9 Twinair turbo engines 1461/C17 142x102x40 mm - 1,5 kg 1 014610113 1461/C13A 240x210x50 mm 1,7 kg 1 014610133182
1461/C17B 1461/C20G 1461/C23Btiming devices for timing devices for timing devices for Opel petrol enginesVolkswagen/Audi/Seat and Skoda petrol Fiat Iveco/Peugeot/Citroën/Ford dieselengines engines Engines: 1.0 - 1.2 - 1.4 ecoflexEngines: 1.2 TSI Engines: 2.2-2.3-3.0 Multijet1461/C17B 1 0146101711461/C18B 1461/C23B timing devices for 1 014610221 280x245x75 mm 2,5 kg 1 014610224Volkswagen/Audi/Seat and Skoda petrolengines 1461/C20G 385x290x100 mm 5,5 kgEngines: 1.6-1.8-1.8T, 1.4-1.6-1.8-2.0 16V,1.4-1.6-2.0 FSI 1461/C21G 1461/C24B timing devices for Renault diesel engines timing devices for Mini-Peugeot/Citroën petrol engines Engines: 1.6 dCi Engines: 1.4 - 1.6 (N12-N14)1461/C18B 310x290x120 mm 2,5 kg 1 0146101821461/C19 1461/C21G 1461/C24B timing devices for 310x290x120 mm 3 kg 1 014610222 280x245x75 mm 2,8 kg 1 014610225Ford Duratorq engines 1461/C22B 1461/C25GEngines: 2.0-2.2-2.4 DIESEL timing devices for Peugeot/Citroën petrol timing devices for Mini diesel engines engines1461/C19 Engines: 1.6 diesel (W16D) 420x185x60 mm - 1,5 kg Engines: 1.0-1.2 VTi 1 014610190 1461/C22B 1461/C25G 280x245x75 mm 2 kg 1 014610223 270x120x45 mm 1 kg 1 014610226 183
1461/C26B 1461/C29B 1462CF/C6timing devices for Fiat/Alfa Romeo/Lancia timing devices for set of 6 single-ended bi-hex wrenchespetrol engines Ford petrol engines for fuel injector connectorsEngines: 1.2-1.4 8v engines: 1.0 EcoBoost sizes: 12-14-16-17-18-19 mm 1462CF/C6 260x145x60 mm 1 014620006 1461/C29B 1462CF 1 014610227 280x245x75 mm - 2,6 kg 1 014610209 single-ended bi-hex wrenches for fuel injector connectors1461/C26B 280x245x75 mm 1,7 kg 1461/C27G 1461/C30Gtiming devices for Bmw diesel engines timing devices for Volkswagen/Audi/Seat and Skoda diesel mm Engines: 1.6-2.0D (N47-N47S) engines 12 1 014620012 engines: 1.6-2.0 CR TDI 14 1 014620014 16 1 014620016 for engines built as from 2012 17 1 014620017 19 1 014620019 18 1 014620018 1462/KD tool assortment for removing Denso injectors, complete with hammer1461/C27G 280x245x75 mm 2 kg 1 014610228 1 014610231 1461/C30G 280x245x75 mm - 2 kg1461/C28B 1462/KD timing devices for 335x210x80 mm - 4,8 kg 1 014620060Volkswagen, Seat and Skoda petrol engines 1462/KIengines: 1.0 - 1.0 Bluemotion Tech assortment of common rail diesel injector1.0 Ecofuel/Ecomotive - 1.0 Green Tech pullers Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed 1461/C28B 1462/KI 280x245x75 mm - 1,7 kg 1 014610229 530x470x140 mm - 20 kg 1 014620235184
1462/KMRC 1462AD/SMN 1464APtool assortment for removing injectors adapter kit for removing set for testing high pressure system infrom Mercedes 2.1L, 2.2L, 3.0 V6 and Siemens and Denso injectors common rail diesel engines,Chrysler engines with item 1464T For use with item Beta 960KI/1462KIFor Bosch (2.1 and 2.2L) and Delphi (3.0) injectors Complete with:Injectors can be removed - high pressure pipe setwithout removing engine. - fittingsParticularly suitable for following car models: - 2,000 bar sensorMercedes Vito, Vario, CLK, Sprinter, Viano,M,GL,C,GLK,E,CLS,S,R,G ClassesChrysler 300 C 1462AD/SMN 1 014620436 1462PIM 1464AP injector maintenance 1 014640450 plates, pair vice locking sections: Ø 11-12-13-14-16-19-20 mm1462/KMRC 1464APB 310x300x118 mm - 3,5 kg 1 014620070 set for testing high pressure system in FSI petrol engines, for use with item 1464T 1 014620502 comes with 200 bar sensor and connectors1462/KU 1462PIMuniversal tool assortment for removing 1463/KITdiesel common rail injectors valve timing system pulley locking kitComplete with pliers and hammer 1464APB 1 014640500 1463/KIT 1464IC 280x140x75 mm - 1,2 kg 1 014630001 complete set of dummy injectors and dummy glow plugs for item 1464T Makes it possible to connect to the engine to check compression in diesel engines with digital tester 1464T.1462/KU 390x290x100 mm - 4,5 kg 1 0146201001462AD/BSC 1464Tadapter for removing digital pressure and compression testerBosch common rail injectors SPECIFICATIONSFor use with items Beta 960KI and Beta 1462/KU • 5\" touch screen display • rechargeable polymer lithium battery • complete with 80 bar sensor (for low pressure) and USB cable Contents: • 22 dummy glow plugs • 5 dummy injectors • 1 universal dummy injector kit for trucks, marine engines and agricultural machines1462AD/BSC 1464T 1464IC 1 014620435 1 014640050 1 014640350 185
1464PF 1466/C5 1467LF kit of 5 brakeset for testing bleeding wrenches electric instrument forpressure in braking brake fluid replacementsystem, kit contents:for use with item 1464T With \"pulsating effect\" • 5 wrenches sizes 7-8-9-10-11 mmcomes with adaptersand connectors • 1 drain hose with check valve 1466/C5 260x170x50 mm 1 014660100 \"Pulsating effect\"1464PF 1467 • Automatically stops when tank is empty, 1 014640650 brake fluid extractor thereby preventing air from being let in1464PT • Maximum tank volume: 20 lset for testing • Operating pressure: 0.4÷3.5 bar turbo pressure, • Power supply: 230V 1 014670100for use with item 1464T Supplied with: • Brake oil recovery tankcomes with sensor • 1 universal cap + 1 standard cap E20and connecting cable 1467LF 1467LF/RC vessel with recovery tube for item 1467LF Pressure: min 5 bar, max 11.5 bar 1 014670001 l 1467 1,5 1467/RK1 spare tube kit for item 14671464PT 1 014640550 1 0146701251464TDIset for testing 1467LF RCpump pressure 1 014670501in TDI engines, 1467/RK1for use with item 1464T 1468N 1467/RK2 valve depressors for disc removalcomes with connector spare filler for item 1467 230 mm 1468/N1 245 mm 1468/N2 180 mm 1 014670502 1467/RK2 1468/N3 1464TDI 1468N/1 1 014640600 1468N/2 1 014680011186 1468N/3 1 014680012 1 014680013
1470 1471M/50 1471PN/B3drum brake spring pliers pneumatic tool for pushing back and BMW handbrake adapter rotating right and left disc brake pistons with L accessories Ø 6 mm L Ø Ø 32 mmmm 1471PN/B3 210 1 014700001 1 014710083330 1 014700002 1471PN/B4540 1 014700010 BMW handbrake adapter1470FT Ø drum brake shoe spring clamp pliers 1 014710069 mm Kg Bar40° angled noses 50 150 5÷8Easy access to awkward spaces Ø 5 mm L Ø 28 mm Lmm 1471M/P worn pad and TRW-Mégane caliper adapters184 1 014700000 1471PN/B4 1471 1 014710084drum brake spring pliers 1471PN/B5 Mini/ BMW handbrake adapter L 1471M/P Ø 5 mm L 1 014710080 Ø 19 mmmm 1471M/W50330 1 014710001 VW Passat handbrake adapter (≥ 2005)1471A 1471PN/B5 handbrake wire pliers 1 014710085A Ø 5 mm 1471CF Ø 30 mm pentagon hand sockets for brake caliper nuts B B 220 mm 1471M/W50 mm 1 014710079A max 1471PN/B1 mm 5 2 014710010 Ford handbrake adapter451471M/C22 mm 14 1 014710314pneumatic tool for pushing back 19 1 014710319and rotating right and left discbrake pistons with accessories 1471CM pentagon socket driver for brake caliper 10 mm screws 1471PN/B1 1 014710081 1471PN/B2 Daily handbrake adapter Ø 8 mm Ø 30 mm1471M/C22 mm 350x310x85 mm - 3,5 kg 1 014710101 10 1 014710360 1471PN/B2 187 1 014710082
1471CM/E11 1472AU/P 1472FCL/RP spare cable for pliers 1472FC/Lhexagon socket driver, 11 mm, automatic hose ring pliersfor Mercedes ML brake caliper screws (series with extension166) L Ø L1 L Ø L L1 Ø 1472FCL/RP mm mm mm mm L 1 014720105 1 014720096 mm mm 1472FCA11 24 75 15,5 collar removal pliers 1 014710361 18÷54 630 with Visa ® type rack1471D2 1472R/AUtool for pushing back front disc brake pistons, spare tips for pliers 1472AUwith closed callipersTwo pairs of plates for working on 2 and 4 piston callipers 140 mm 1472AU/R 1 014720101 1472AU/RP 1472FCA spare cable for pliers 1472AU/P 1 014720041 1472TM quick coupler pliers for multijet filters 1472AUP/R 230 mmmm 1 014710301 1 01472010610 220 mm 1472FC 1472TM 250x170x60 mm 1,5 kg Clic® collar pliers with swivel heads 1 0147202001472hose clamp pliers 1472VW hose clamp pliers, with swivel heads For Volkswagen and Mercedes cars 210 mm 1472FC 1 0147200901472 1 0147200011472AUautomatic hose clamp pliers 1472FC/L 200 mm Clic® collar pliers with flexible extension 1472VW 1 014720051 1473 OETIKER® collar pliers 275 mm 275 mm L Ø L 1473 275 mm 1 014720100 1 014720095 1 014730001 630 mm 18÷53188
1473A 1473T 1474DLslotholder pliers for OETIKER® collars steel collar cutting nippers spark-plug pliers, long nose, double layer PVC coated handles 230 mm allows collars to be cut without risking damaging guards, sleeves etc. 170 mm Ø 12 mm L 275 mm A 1474DL 1 014740015 1474G1473A A Max L curved long nose pliers 1 014730010 mm 1 014730582 for removing glow plug caps mm 220 235 mm 14 1473Q 1474/C4 OETIKER® collar pliers with drive kit of 4 tools for removing Volkswagen spark For use with: plug coils • torque wrenches • ratchets• male drives 1474G 1 014740200 250 mm 1474/C4 1475U 290x190x50 mm - 1 kg 1 014740100 combination pliers, bright chrome-plated, 1 014730005 double layer PVC coated gun handles1473Q 1474E/VW 125 mm1473P expansion puller for ignition coils,clamp pliers for OETIKER® low-profile collars Volkswagen groupA 180 mm 210 mm 1 014750010 1475U 1476 adjustable self-locking pliers for exhaust pipe cutting 1474E/VW 1 0147401201473P A Max 1474L Ø mm 1 014730020 spark-plug pliers, curved long nose, 15° 250 mm 531473FN 50 mmtool for tightening and cuttingstrap ties made of stainless steel Ø min Ø max mm 1 014760001For use with Panduit® ties and the like mm 75 19 290 mm 1476/RC spare chain for item 1476 Ø ØE min A Ø min ØE 1476RC 1 014730501 mm 2 014740010 1 014760010 A mm mm 20 1894,7÷9,5 14
1476A 1476T 1477K/7pliers for exhaust pipe cutting wrench for removing/installing turbines kit with bent reversible ratcheting wrench on Volkswagen Audi diesel engines and bits Ø L 230 mm Ø min Ø max 105 mm mm 1 014760005 mm 9530 - 2 TORX T40-T45 bits 1 014760200 - 1 XZN 10 bit mm - 1 hexagon bit, 8 mm - 3 bi-hex bits, 10-12-13 mm 121476A/RC 1477/C10spare chain for item 1476A bent wrench with 9 bits for belt tightening nuts 1477K/7 L 1 bent wrench with bit drive mm 1 014770051 4 double bi-hex bits: 12x14 - 13x15 - 16x17 - 18x19 mm 5 bits for Torx(R) head screws: E10 - E12 - E14 - E16 - E18 2501476A/RC 1478 1 014760015 pin removing pliers1476C/1 exhaust pipe expanders L1 Ø 265 mm16 mm L 1477/C10 1478 1 014780001 530x110x55 mm 1 014770310 1478T1476C/1 plastic pin removable pliersØ 30÷42 mm 1 014760101 with swivel head and pressure clipsL = 131 mmL1 = 51 mm 1477D Head can be rotated 90° ring wrenches for belt tightening nuts 240 mm1476GT pliers for removing rubber supportsfrom exhaust pipes A L 555 mm S 1478T S L A Max 1 014760050 mm mm 1 014780101mm mm mm 13 1 014770113 4,5280 58 3 15 1 014770115 16 1 0147701161476PSA 17 1 014770117 1478/3Pexhaust collar pliers 19 1 014770119with pin, PSA group plastic pin removal pliers 1477D/S5 with 3 release pointsNose shape and automatic rack locking set of 5 ring wrenches for belt tightening nutsmake it possible to work without pulling out pin A 1477D/S5 140 mm S 13-15-16-17-19 mm 1 014770200 600x200x70 mm - 2,2 kg L 1478/3P 1 014780151 L A Max S 1 014760060 mm mm mm 309 60 12,2190
1479 1479RB/1 1480trim pin remover straight putty knife scraper 1 014790315 Kit for filling diesel oil filters of cars without electric pumps 175 mm 100 mm • Also for use with tyre inflators 30 1 014790320 285 mm mm Kit contents: • GM quick couplings 235 mm 1 014790310 • Renault, GM, Fiat quick couplings, inside Ø 6 mm1479 2 014790001 • Renault, GM, Fiat quick couplings, inside Ø 7 mm 1479RB/1 • Fordquick couplings1479/B27 • PSA quick couplings, inside Ø 6 mmkit of 27 nylon tools for removing pins 1479RB/2 • PSA quick couplings, inside Ø 7 mmand working on plastics and seals, bent putty knife scraper • Ford quick couplingshangable • 2 cone-shaped adapters for cars without quick couplings 100 mm 30 1480 mm 410x320x70 mm 1 0148000101479/B27 235 mm 1 014790407 1479RB/2 1479RB/3 flat putty knife scraper 100 mm 50 mm 235 mm 1479RB/3 1479U/13 putty knife scrapers1479L/S2 95 mm 1481/C12 Kit of 6 pairs of hose pliersmultipurpose wrecking bars, pair,made of Teflon ® Kit contents: • 2 different pairs of pliers size 1/4\" 220 mm • 2 different pairs of pliers size 3/8\" • 2 different pairs of pliers size 5/16\" • 3 pairs of rubber caps 1479U/13 2 014790010 1479U/32 trim pin remover, stainless steel blade1479L/S2 1 0147905101479N/S5 95 mmkit of 5 nylon trim pin removers 220 mm 1479U/32 2 0147900151479N/S5 1481/C12 1 014790251 370x270x59 mm 1 014810312 191
1481PL/A 1482A/1 1482A/5plastic hose pliers 3-leg wrench for floating ring nuts, wrench for tank floating ring nuts, tank with aluminium ring nut 22 sectors 160 mm For operating on aluminium ring nut installed on for use on plastic ring nuts 190 mm Fiat, Volkswagen, Opel, Chevrolet, Mercedes and BMW cars in VAG group cars since 2011 220 mm 1481PL/A Ø Ø1481PL/B mm 3 014810110 Ø1481PL/C 3 014810120 Ø mm 8÷15 3 014810130 15÷25 Ø 180 1 014820015 25÷45 mm 1482/8 - 1482/10 185 1 014820005 quick coupler pliers for fuel pipes 1482A/2 110 mm wrench for tank floating ring nuts, 12 sectors Ø1481PL/S3 For operating on ring nut with no side slots installed onset of 3 plastic hose pliers Fiat and Ford cars and vans 1481PL/A 1481PL/B 1482/8 Ø Ø 1482/10 mm 2 014820008 2 014820010 Ø 8 mm 10 1481PL/C 132 1 014820006 1482B 1 0148102001481PL/S3 1482A/3 quick coupler pliers1481PL-A Ø 8÷15 mm wrench for tank floating ring nuts, for fuel pipes1481PL-B Ø 15÷25 mm PSA group1481PL-C Ø 25÷45 mm So designed as to make it possible to operate on1482 decentralized axis by removing ring nut, without damaging delicate fuel lineadjustable self-locking wrenchfor tank floating ring nuts 22 mm 1 014820021 Ø 1482B Ø 1482C 1 014820007 wedges (2 pairs) for releasing diesel fuel filter mm 157 Ø Ø fittings, Fiat, Volkswagen, Jeep, Chrysler mm 1482A/4 and Volvo groups 1 014820001 wrench for tank floating ring nuts,89÷170 5 teeth for use on FCA group cars, Quick filter replacement without including Freemont, 500L, 500X, Renegade irreparably damaging fittings 22 mm Ø Ø mm 1 014820014 145 1482C 1 014820022192
1483K/12 1484 1485Rkit for removing valves set of 2 tools for removing and installing universal tool for rotating camshaft pulleysfrom air-conditioning system stretch belts made from forged steelwith set of five-star head bits with 2 pairs of tips Allows stretch belt to be quickly removed and correctlyKit contents: Ø1• 2 female octagon sockets, Ø 12 and 15 mm, for high- installed, without risking damaging itpressure valves Ø• 2 male open end sockets, section 2.2 and 3.2 mm, for throttlevalves• 1 set of five-star head bits:PT10, PT15, PT20, PT25, PT27, PT30, PT40 L Ø Ø1 L mm mm mm 1 014850025 30÷120 10 - 17 500 1485R/P10 1484 1 014840010 pairs of inserts 1485BP Ø 10 mm half-moon tool1483K/12 for locking toothed pulleys 120x80x35 mm 1 014830012 can be adjusted through swivel handle, tightens and locks pulley from outside, preventing neighbouring sensors from 1485R/P10 getting damaged 1 014850035 1485R/P171483KV-PT/S7 A pairs of insertsset of five-star head bits A Max Ø 17 mmIncluded sizes:PT10 - PT15 - PT20 - PT25 - PT27 - PT30 - PT40 mm 130 1 014850000 1485/KIT kit for controlling cam belt tension1483KV PT/S7 1485R/P17 1 014830117 1 014850038 1485VAG1483K/22 tools for pre-loading 1485VAG 12,5 1 014850100 timing belt bearings 1485VAG 21,5kit for separating couplers on air-conditioning,fuel supply and lubrication systems • 3-position swivel head 1 014850062 1485/KIT P 1 014850071 230x140x75 mm - 580 g L 1485MJ LP camshaft locking tool, mm mm for 1.3 16V Multijet engines 1485VAG/12,5 190 12,5 2 3-form heads for working on all 1.3 16V Multijet engines 1485VAG/21,5 195 21,5 of FCA, Opel, Ford and Suzuki group vehicles1483K/22 L L 300x230x55 mm - 1 kg 1 014830022 mm 1485MJ 500 1 014850150 193
1486/10 1486/40 1486/80wrench for natural gas cylinder valves wrench for natural gas cylinder valves wrench for natural gas cylinder valves• VW group cars since 2008 • Touran 1st series • B-Class• Panda from 2004 to 2012 • Zafira 3rd series• Grande Punto from 2005 to 2012• Ducato since 2010• new Doblò and Combo• Cubo and Fiorino 36 mm 36 mm 36 mm 1486/40 1486/80 1 014860140 1 0148601801486/10 1486/50 1486/90 1 014860110 wrench for natural gas cylinder valves wrench for natural gas cylinder valves1486/20 • Panda since 2012 • Zafira 1st serieswrench for natural gas cylinder valves • New Ypsilon • Kangoo 1st series • Sprinter• Multipla• Ducato 1st and 2nd series until 2010 36 mm 36 mm• Berlingo and Ranch• C3 with iron cylinders 1486/90• Punto from 1999 to 2010• Doblò 1st series• Daily and Iveco group• Dr5 1486/50 1 014860150 1 014860190 1486/60 1488 - 1488L wrench for natural gas cylinder valves oil-filter wrench with double chain 36 mm • C4 Picasso • BRC systems 230 mm1486/20 1 014860120 Ø1486/30 36 mm 1488 Ø wrench for natural gas cylinder valves 1488L mm 1 014880001 1 014880050• Zafira 2nd series 60÷110• Combo 1st series 60÷160 1 014880010 1486/60 1488/1 1 014860160 oil-filter wrench with thin double chain 36 mm 1486/70 wrenches for natural gas cylinder valves, pair 1486/30 • C3 with composite cylinders Ø Ø 1 014860130 mm 60÷110 1488R... spare chain 36 mm 1488RC 1 014860170 1488R/L 1 014880101 1486/70 1488RC/1 1488 1 014880150 1488/L 1 014880110 1488/1194
1489/31T 1489/C14 1491 adjustable oil filter wrench alternator pulley assortment of 14 tools for free alternator free wheel wrench pulleys Ø T50 15 31 1 0148900161489/33 Ø alternator pulley free wheel wrench 2 014910001 mm 65÷110 1491R spare metal band for item 1491 19,45 Ø 12 15 mm mm mm 1489/C14 1 014890100 867PE 8 mm 3 014890010 867PE/L 8 mm 10 0149100101489/33 33 867XZN/L M10 867TX/L T50 1491R 1489/33P 867/2 1/2\" alternator pulley free wheel wrench, 10 mm 1491C for new Bosch FIAT Grande Punto alternators 920B adjustable oil filter pliers 1489/33 1489/33P M10 1489R 1489/Y T50 Ø 1489/31T 10 mm 1489/E 10 mm LM mm 1 014890015 188 15 mm 18810 15 31 420x250x45 mm - 1,9 kg Ø L mm 1 0149100301489/E mmalternator pulley 300free wheel wrench 60÷100 1490 1492/1 - 1492/2 strap wrenches for oil filters adjustable oil filter wrenches 225 mmmm mm 1 01489002510 15 190 mm1489R Øalternator pulley free wheel wrench Ø 28 mm Ø mm 1 014920001 1492/1 1 014920002 1492/2 60÷80 80÷110 15 mm Ø max mm 1 0149000011489/R 1490/1 1 014900002 1492T 1 014890020 1490/2 160 drier filter wrenches 2401489/Y 1490/R1 - 1490/R2 H spare fabric straps for item 1490alternator pulley free wheel wrench,for Nippondenso alternators Ø Ø ØH 1 014900101 1 014920540mm 1490R/1 Ø mm 1 014900102 mm mm 1 014920575 3 014890040 1490R/232 160 1492T 40 125÷145 40 240 1492T 75 120÷140 75 195
1493B 1493/PF 1493AL 4S bi-hex wrenches Purflux® oil-filter wrenches oil filter wrenches for hard-to-reach oil filter cartridges for Asian cars 4-hook profile S Ø Ø2 Ø Ø1 mm N Ø1 mm Ø2 mm 27 mm mm 1 014930524 66 6 1 014930202 27 1 014930304 1 014930527 76 12 1 014930216 70 64,5 1 01493030524 8 1 014930532 76 30 1 014930222 64,527 8 1 014930536 86 18 1 014930232 80 32 8 1 014930538 93 36 1 014930240 1 01493042436 8 93 45 1 014930242 1493AL CF 1 01493042738 8 96 9 1 014930070 hexagon socket wrenches 1 014930430 96 18 1 014930246 for oil filter cartridges 1 014930432 108 18 1 014930254 1 014930436 1 0149304381493B/S5 1493/C30set of 5 bi-hex wrenches set of 28 oil filter wrenches Hfor hard-to-reach oil filter cartridges sizes:24-27-32-36-38 mm ØH mm mm Ø 24 34 27 27 34 27 30 34 27 32,5 34 27 36 34 27 38 34 27 1493B/S5 Sizes included in kit (Ø mm / n°. of sides) 1493/C19 1 014930599 1493: set of 18 oil filter wrenches, 1493 65/14 - 67/14 - 68/14 - 73/14 - 74/15 particularly suitable for Asian cars oil filter wrench 76/15 - 75.77/15 - 76/14 - 76/8 - 78/15 - 80/15 1 014930200 82/15 - 86/16 - 90/15 - 92/10 - 93/15 - 95/15 Ø mm N°. of sides 1 014930206 100/15 - 106/15 - 108/15 63-64 14 1 014930208 66.5 14 1 014930209 1493PF (Purflux) 74 14 1 014930210 66/6 - 76/12 - 76/30- 86/18 79 15 1 014930212 93/36 - 93/45 - 96/18 - 108/18 84 14 1 014930214 87 16 1 014930218 - Includes 1 adjustable oil filter wrench 92 15 1 014930220 Ø 65÷120 mm 94.5 15 1 014930224 100.5 15 1 014930226 1493/C30 64.5 14 hook wrench for Toyota cars 1 014930228 530x400x110 mm - 4 kg 1 014930000 64.5 14 hook wrench for Lexus cars 1 014930230 6 hexagon sockets, sizes 24-27-30-32.5-36-38 mm, for filter Ø 1 014930234 cartridges 1 014930236 Kit includes 1 universal adjustable wrench Ø 58÷93 mm Ø N 1 014930238 1493AL mm 1 014930244 oil filter wrenches 14 1 014930248 65 14 1 014930250 N= number of sides68 14 1 01493025273 14 1 014930256 74 15 74 15 75-77 876 14 Ø76 1576-74 15 Ø 1493/C19 78 15 mm N 1 014930310 490x450x60 mm - 4 kg 1 01493001980 15 1 01493031582-80 16 64 14 27 1 01493032086 15 66,5 14 27 1 01493032590 10 74 14 27 1 01493033092 15 79 15 27 1 01493033593 15 84 14 27 1 01493034095 15 87 16 27 1 014930345100 15 92 15 27 1 014930350106 15 94,5 15 27108 18 100,5 15 27135196
1493FF 1493Z 1494XZN wrench for removing/installing plastic seats of self-locking oil filter wrenches, male oil drain plug socket with XZN® profile Ford Peugeot Citroën oil filters left hand engines: TDCi-HDi M Allows plastic seat to be correctly tightened at 25 Nm by means of a torque wrench Ø M 16 1 014940296 1493Z/1 Ø 1493Z/2 mm 1 014930090 1494VW 1493Z/3 1 014930095 special socket for plastic oil drain plugs, 250 mm 60÷80 1 014930100 Volkswagen engines 80÷100 mm 100÷125 Allows plastic plug to be removed and installed from oil sump. 27 1 014930127 1494 Specially designed for Volkswagen cars with TFSI and TDI square oil drain plug socket engines 1493/S-U self-adjusting oil filter wrench with 3 arms, for right and left hand tightening 10 mm 1494VW 1 014940305 mm 1494/C14A 10 1 014940280 assortment of 14 oil change tools Ø 1494E male hexagon oil drain plug sockets Ø mm 1 014930074 1 014930076 1493/S 3/8-1/2 80-1151493/U 1/2 105-1651493T mm 8 1 014940208self-adjusting oil filter wrench with three arms, 9 1 014940209for left-hand tightening 10 1 014940210 11 1 014940211 12 1 014940212 1494/C14A 14 1 014940214 1 014940150 17 1 014940217 1494E 8-9-10-11-12-14-17 1/2 1494Q 1494Q 8-9,5(3/8\")-12-13 male square oil drain plug sockets 1494 10 21 mm Δ 1494T 9,5(3/8\") 3/8 3/8 1494XZN M16 Ø 380x305x40 mm - 1,7 kg mm Ø 8 1 014940258 1494M mm 1 014930075 9,5 1 014940259 tool for hexagon oil drain plugs, 12 1 014940262 magnetic, flexible60÷120 13 1 014940263 Allows plug to be unscrewed without risking1493J getting burnt or dirtywrench for MultiJet 1494T Ø male triangular oil drain plug socket F Ø Δ L 1/2 105 mm 73 mmØ L FØ mm 1 014930080 mm 1 014940289 mm kg mm 293 2,5 19 1 01494040190 9,5 197
1495/C6 1496/A 1497P oil plug wrench relay removal pliers, bent pattern, 60°assortment of tools for repairing oil sumpthreads 245 mm 10 x 10 mm A 2 014960001• Damaged thread is removed by screw tap and enlarged by 1496/C Aone size oil plug wrench min÷Max• Allows repairs and avoids replacing oil sumpContents: 1497P mm • 1 screw tap M13x1.25 + 6 screws + 12 washers 1 014970160• 1 screw tap M13x1.5 + 6 screws + 12 washers 15÷50• 1 screw tap M15x1.5 + 6 screws + 12 washers• 1 screw tap M17x1.5 + 6 screws + 12 washers 1497/C23• 1 screw tap M20x1.5 + 6 screws + 12 washers• 1 screw tap M22x1.5 + 6 screws + 12 washers assortment of 23 tools for releasing electrical connectors 220 mm 8 x 10 mm 3 0149600101495/C6 1497CEL 420x185x60 mm - 2,1 kg 1 014950500 tool for removing electrical connectors from VAG group vehicles1495Mscrew tap for oil drain plug threads allows connectors to be quickly disconnected, without getting damaged. 1497/C23 440x250x70 mm - 1,7 kg 1 014970200 1497/C94 assortment of 94 car testing connectors for use with main diagnostic tools 1497CEL • 2 t-taps 1 014970170 • 2 potentiometers • 2 warning lights M 1497D • 2 SRS connectors 1 014950553 relay removal pliers, straight pattern • 2 alligator clips13x1,25 1 014950563 • 2 acicular probes13x1,50 1 014950565 • 2 prods15x1,50 1 014950567 • 2 dual banana connectors17x1,50 1 014950570 • 4 single banana connectors20x1,50 1 014950572 • 24 flat male terminals 0.6÷6 mm22x1,50 • 12 round male terminals 1.6÷3.9 mm • 24 flat female terminals 0.6÷6 mm • 12 round female terminals 1.6÷3.9 mm1495T Akit with 6 oil drain plugs and washers 1497D A min÷Max 1 014970150 mm 15÷50 M 1497/C94 1 014950503 430x390x100 mm - 3 kg 1 014970300 13x1,25 1 014950513 13x1,50 1 014950515 15x1,50 1 014950517 17x1,50 1 014950520 20x1,50 1 014950522 22x1,50198
1497RC 1498MN/12 1498LT/12 t-taps, pair multipurpose portable starter portable high-performance starter,• cable section: 1.5÷3.5 mm • Motor vehicle starting with 12-volt battery (diesel and petrol ultralightweight• voltage: 0÷330V engines up to 2,000 cc)• max. current: 5A • Charging of tablets, mobile phones and electronic devices in general • Multi-use LED torch 1497RC The microprocessor provides full protection against: 1 014970351 - polarity reversal - short circuits1498 - incorrect voltagevoltage tester - overloads - underdischarge - overcharge - overtemperature 135 mm STANDARD ACCESSORIES TECHNICAL DATA - lithium-cobalt battery Operating voltage: 12 V - starting cables with insulated clamps and device protecting Continuous amperage: 800 A against polarity reversal and short circuits Maximum pickup amperage: 2000 A - USB outlet for charging electronic devices Peak amperage: 4000 A - digital display and battery charge indicator Cable length: 500 mm - USB cable with charge adapters Battery type: 4-cell LifePo4 - mains and car power supplier Memory saving function: YES Dimensions: 260 x 135 x 72 mm TECHNICAL DATA Net weight: 2.5 kg Pickup current: 600A Complete with charging power supply 12 V 1.3A Battery type: LiCoO2 Starting output: 12 volts 1498LT/12 1 014980012 1498MN/12 1 0149800003÷48V 1498MN/12-C 1498LT/12-SF 2 014980100 booster cable with clamps for item 1498MN/12 wall fixing bracket for starter 1498LT/121498CM/12 1498MN/12-C 1498LT/12-SF portable motorcycle 1 014980005 1 014980013emergency starter 1498/12 Portable car starter, 12V 3 functions in 1:- starter- additional battery for electronic devices (tablets, smartphonesetc.)- high-brightness LED torch Equipment: TECHNICAL DATA:- Starting cable with insulated clamps and protection diode • Pickup current: 2200A- Mains battery charger • Shoulder strap included- Car battery charger • Sealed lead acid battery, solid electrolyte (AGM) type- USB cable with charge adaptersTECHNICAL DATAStarting current: 200APeak current: 400AUSB outlet: 5V 2,1ADimensions: 130x50x15 mmWeight: approximately 300 g 1498/12 1 014980030 13 kg 1 0149804801498CM/12 199
1498/24 1498/2A 1498/8Aportable car and commercial vehicle starter, electronic motorcycle battery charger, 12V Electronic car / commercial vehicle battery12-24V charger, 12 V allows charging of all Pb Wet, Agm, Gel, Mf and Vrla battery types and LiFePo4 lithium batteries TECHNICAL DATA: • Slow and quick charge (2A-8A)• Pickup current: 4200A (12V) - 2100A (24V) • Flat battery recovery function• Shoulder strap included • Power supply function 13.8V-5A• Sealed lead acid battery, solid electrolyte (AGM) type • Protected against polarity reversal and short circuits • Manual battery type selection • Digital backlit display • Pull-back fixing hook1498/24 - Two different types of charge, for lithium and lead acid batteries TECHNICAL DATA 17 kg 1 014980490 respectively - Automatic multi-stage charge cycle Power supply voltage: 220V - 240V1498B12/R02 - Reverse polarity and short-circuit protection Frequency: 50-60 Hz - IP65 degree of protection Rated current (min-max): 2-8 Amp12V spare battery - Complete with cable with clamps and cable with eyelets Battery voltage: 12Vfor starters 12-24V - Power supply voltage: 220-240V Battery capacity: 5Ah-160Ah Memory saving feature: 13,8V - 5A TECHNICAL DATA Degree of protection: IP65 - Charging current: 1A - Charging capacity: 2Ah-40Ah 1498/8A - Frequency: 50-60 Hz 1 014980108 - Battery voltage: 12V - Dimensions: 180x80x40 mm 1498/40A - Weight: 0.5 kg multipurpose battery charger / starter, 12-24V wheeled 1498/2A 1 014980502 1 014980102 1498B/12-R02 1498/4A1498C/24 Electronic car/motorcycle battery charger, 6-12wheeled starter, 24V V • Wheeled frame for easier movements and minimized effort • Protected against polarity reversal and short circuits • 3 programmed charging cycles and 1 manual cycle• Outstanding performance for numerous starts, including • Automatic 6 V or 12 V selection • electronic adjusting potentiometerparticularly demanding ones • Automatic battery type selection • specific WET-SPIRAL/GEL-AGM charging cycles• Electronic battery charger included • Digital backlit display • electronic control and protection system• LED and sound alarms in case of polarity reversal • Pull-back fixing hook • 10-stage charging process• Protection against voltage peaks • battery desulfurization and recovery function• Battery charge indicator • supply function• Solid electrolyte lead-acid battery (AGM) • dual voltage, 12-24V • also suitable for Start&Stop batteries Continuous amperage 1700 A TECHNICAL DATA • professional rubber-insulated brass clamps Operating voltage 24 V Power supply voltage: 220V-240V Pickup amperage Frequency: 50-60 Hz TECHNICAL DATA Cable length 4000 A Rated current (min-max): 1-4 Amp Power supply: 230V Cable section 2000 mm Battery voltage: 6V/12V Output voltage: 12-24V Charging voltage Battery capacity: 4Ah-80Ah Charging current: 1-40A Automatic battery charger 70 mm Charging time: 12 hours Starting current: 350A max cc 230 V Degree of protection: IP65 Charging capacity: 4-450Ah 1498C/24 24 V - 10 A 1498/40A 200 330x250x792 1 014980140 1 014980244 1498/4A 1 014980104
Search
Read the Text Version
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
- 251
- 252
- 253
- 254
- 255
- 256
- 257
- 258
- 259
- 260
- 261
- 262
- 263
- 264
- 265
- 266
- 267
- 268
- 269
- 270
- 271
- 272
- 273
- 274
- 275
- 276
- 277
- 278
- 279
- 280
- 281
- 282
- 283
- 284
- 285
- 286
- 287
- 288
- 289
- 290
- 291
- 292
- 293
- 294
- 295
- 296
- 297
- 298
- 299
- 300
- 301
- 302
- 303
- 304
- 305
- 306
- 307
- 308
- 309
- 310
- 311
- 312
- 313
- 314
- 315
- 316
- 317
- 318
- 319
- 320
- 321
- 322
- 323
- 324
- 325
- 326
- 327
- 328
- 329
- 330
- 331
- 332
- 333
- 334
- 335
- 336
- 337
- 338
- 339
- 340
- 341
- 342
- 343
- 344
- 345
- 346
- 347
- 348
- 349
- 350
- 351
- 352
- 353
- 354
- 355
- 356
- 357
- 358
- 359
- 360
- 361
- 362
- 363
- 364
- 365
- 366
- 367
- 368
- 369
- 370
- 371
- 372
- 373
- 374
- 375
- 376
- 377
- 378
- 379
- 380
- 381
- 382
- 383
- 384
- 385
- 386
- 387
- 388
- 389
- 390
- 391
- 392
- 393
- 394
- 395
- 396
- 397
- 398
- 399
- 400
- 401
- 402
- 403
- 404
- 405
- 406
- 407
- 408
- 409
- 410
- 411
- 412
- 413
- 414
- 415
- 416
- 417
- 418
- 419
- 420
- 421
- 422
- 423
- 424
- 425
- 426
- 427
- 428
- 429
- 430
- 431
- 432
- 433
- 434
- 435
- 436
- 437
- 438
- 439
- 440
- 441
- 442
- 443
- 444
- 445
- 446
- 447
- 448
- 449
- 450
- 451
- 452
- 453
- 454
- 455
- 456
- 457
- 458
- 459
- 460
- 461
- 462
- 463
- 464
- 465
- 466
- 467
- 468
- 469
- 470
- 471
- 472
- 473
- 474
- 475
- 476
- 477
- 478
- 479
- 480
- 481
- 482
- 483
- 484
- 485
- 486
- 487
- 488
- 489
- 490
- 491
- 492
- 493
- 494
- 495
- 496
- 497
- 498
- 499
- 500
- 501
- 502
- 503
- 504
- 505
- 506
- 507
- 508
- 509
- 510
- 511
- 512
- 513
- 514
- 515
- 516
- 517
- 518
- 519
- 520
- 521
- 522
- 523
- 524
- 525
- 526
- 527
- 528
- 529
- 530
- 531
- 532
- 1 - 50
- 51 - 100
- 101 - 150
- 151 - 200
- 201 - 250
- 251 - 300
- 301 - 350
- 351 - 400
- 401 - 450
- 451 - 500
- 501 - 532
Pages:
