1498/4A-8A CO 1498SM 1498ST/TBeyelet cable for items 1498/4A and 8A memory saver, 12 V mini thermal printer prevents data stored by computer on board cars for tester item 1498TB/12 from getting lost during maintenance jobs or battery replacement. • Mini printer can be directly connected to tester • Allows test results to be printed 1498/4A-8A-CO 1 0149801141498/4A-8A CPcable with clamps for items 1498/4A and 8A1498/4A-8A-CP 1498ST/TB 1 014980118 1 014980410 1498ST/TB ROT1498/50A Technical specifications: paper refill electronic multipurpose battery charger, 12V - self-supplied for printer 1498ST/TB 2 014980411 - internal battery Pb 5 AhFor charging and powering vehicles - 12 volts while reprogramming and self-diagnosing - professional connection with OBD socket 1 014980801 1498SM 1 014980020 50A 1498TB/12 1498ST/TB ROT digital battery tester, 12VSPECIFICATIONS 1498PC• Max. charging/power supply current: 50 Amp • Allows the following to be tested: battery, alternator and starter voltage stabilizer, 12-24 V• charging • Fitted with software for printing test from PC• battery recovery • Backlit display Protects control units• power supply for ECU diagnostic protocols • Compact, shockproof frame in welding and starting processes• electronic management through microprocessor • 10 language software• protected against polarity reversal and short circuits • Complete with input for connecting a removable mini printer 1498PC (optional accessory) TECHNICAL DATACable length: 3mSection: 10 mm2Charging capacity: 5-500AhMaintenance capacity: 5-1500AhVoltage: 12V1498/50A 150x100x250 mm 1 014980050 TECHNICAL DATA: • Applications: 12V battery test - 12V alternator charge test - Starter test • Operating range: 100-1700 CCA • Reference standards: CCA,SAE,DIN,EN,IEC,JIS • Batteries supported: PB, Wet, Gel, Agm, Mf, Vrla, Sli • Voltmeter: 9V-15V • Cable length: 180 cm • Languages: Italian, English, French, German, Spanish, Polish, Romanian, Dutch, Swedish and Finnish • Accessories included: USB cable and software 1498TB/12 320x270x100 mm 1 014980400 201
1498TC 1505/C5 1530/C5digital glow plug tester windshield wiper removal kit wheel hub and bearing pulling kit, 3, 4, 5 holesQuick, accurate glow plug testing 1 two-leg puller, Ø 25÷40 mm• Suitable for all types of glow plugs, 4.4-5-7-8.5-10-11 Volts 4 half-moon tools, Ø 25 mm, Ø 30 mm, Ø 35 mm, Ø 41 mm Kit contents:• Digital backlit display 1 universal flange (96÷138 mm)• Suitable for steel and ceramic glow plugs 1 hydraulic screw (12 t)• Short circuit and polarity reversal protection 1 hammer face (2.8 kg), required• Turns off automatically when not in use for hubs without central fixing bolts• With buzzer• With SMD LED torch• Compact, shockproof frame 1530/C5 mm 1 015050300 760x320x120 mm - 11,5 kg 1 015300300 12 1547/C6 320x150x60 mm - 1,2 kg dummy ball bearing extractors 1529 multi-step cone pulley puller• Measurement range: 0.00÷25.0Ω L L1• Tolerance: ± 2% A• Resolution: 0.01• Led Display: 1.8\"• Operating temperature: 0°C÷50°C• Power supply: 1 9V battery (not included) 1547/2 1547/11498TC 1 014980450 1 0152900001499sonoscope probe A L L1 min÷Max min÷Max min÷Max mm mm mm 24÷240 60÷95 90÷135 260x210x60 mm - 2,6 kg 230 mm 1529PI 1547/C6 universal injection pump pulley puller 420x185x60 mm - 3 kg 1 0154700061499 • Allows fuel injection pump pulley to be quickly and 1 014990001 accurately removed. • Particularly suitable for Fiat, Ford, Volkswagen, Citroën and1505V Peugeot vehicles. 1547KPwindshield and rear window wiper Includes 3 pairs of screws for tightening puller to pulley: set of 3 pairs of dummy ball terminalsarm remover M6 x 1.0 x 49 mm M7 x 1.0 x 75 mm ØRemovable perforated brass tip M8 x 1.25 x 76 mmfor arm removal, with built-in washer jet 1547KP/1 Ø 1547KP/2 mm 1 015470106 1 015470206 9-11-12,5 5-6-8 1 015470101 L 1547P 1 015470201 hexagonal extensions L A1505V A Max L 1529PI L mm mm 1 015050001 1 015290051 mm 43 37 1547P/1 205 1547/1 1547P/2 102 1547/2202
1547PC/2 1550U 1550U/MRC-Cround extensions, short series pneumatic shock absorber removal tool special forks for item 1550U, L for cars, SUVs and commercial vehicles specially designed for Mercedes C class cars L mm 1 015470202 78 ÷ 205 mm1547PC/2 42 1547/2 x21547PL/2 1550U/MRC-C round extensions, long series 1 015500032 1550U/S... L lower fork for item 1550U L mm 1 0154702031547PL/2 106 1547/21548/C8 1670 Ø internal gearbox bearing puller mm mm 1 015500014for FCA and Opel group vehicles 1 015500015 610 mm 1550U/S 130 78÷130 mm 1 015500016comes with 2 pairs of legs and 4 different supports 1550U/S 182 105÷182 mmto adjust to different models manufactured since 2007 1550U/S 205 125÷205 mm 1550U/SS187 left-hand fork for item 1550U Particularly suitable for left-hand springs, e.g. Nissan Qashqai and Renault Koleos 825 mm INCREASED POWER: maximum thrust 2 tons (10 bars) 1550U/SS 187 UPPER UNIVERSAL HOLD SYSTEM: allows all left/right-hand 1 015500018 spring diameters to be compressed with one upper adaptable1548/C8 plate. 1550U/M 1 015480800 ACTIVE SAFETY SYSTEM ON SPRING: safety hook and 3 vice for shock absorber removal tool item locking valves allow spring to be properly positioned/seated, 1550U maintaining such position throughout compression. If spring is not positioned properly, system will stop machine. Allows shock absorber stem to be locked PROTECTIVE \"FULL BODY\" GRILLE: provides maximum safety1549 and working area coveragekit for removing and installing double effect CONTROL LEVER OPERATION: increased accuracy andshock absorbers sensitivity during compression stagewith gas return WORKING POSITION: working height on rear fork raised up to 875 mmallows stem to be kept straightened while springs are being Supplied with 2 lower forks for diameters 78-205 mminstalled TECHNICAL DATA Maximum thrust: 2 tons (10 bars) - 1.6 tons (8 bars) - 1.2 tons (6 bars) Spring compression stroke: 335 mm 1550U/M 1 015500021 1550U 1 015500010 1550U/MRC-ABE special forks for item 1550U, specially designed for Mercedes A-B-E Class cars1549 310x270x110 mm - 3 kg 1 015490001 1550U/MRC-ABE 1 015500031 203
1555/Q 1555C 1557/S3compressor for MacPherson and equivalent telescopic compressor for shock absorbershock absorber springs springs with 4 forks and torsion bar set of 3 sockets Maximum thrust: 1500 kg for shock absorber nuts 10,5 mm 1/2 Ø 12,5 mm 14,5 mm 3,5 3,5 475 mm mm 5 mm mm A A 22 mm 1 015570010 1557/S3 AØ 1558/C4 min÷Max min÷Max 1 015550202 internal and external snap ring tool, screw-operated mm mm N t square drive allows a high force to be applied 80÷225 90÷160 25000 8,5 in both operating conditions Supplied tips: 1556/1A Ø 2.5-3-3.5 mm compressor for shock absorber springs 13 mm A Ø min÷Max 1 015550006 min÷Max mm mm 80÷19565÷354 L1555/QS min L Max 1 015560101compressor for MacPherson and equivalent mmshock absorber springs 65÷320A 1556/2A compressor for shock absorber springs 27 mm 13 mm Ø mm Ø mm 1 015580100 1558/C4 5,5 ÷ 77 5,5 ÷ 77 330x220x50 mm - 900 g A Ø L 1558P min÷Max snap ring tips, pair,min÷Max for item 1558 mm 1 015550005 mm Ø 90÷205 mm70÷300 2,51555S/BMW-RNT min L Max 3,0 1 015560102 3,5fork for BMW E39, E46 and Renault Mégane II mmshock absorbers, for items 1555DS and 1555/ 1559QS 65÷200 ball joint puller, light series 1557 A impact sockets for truck leaf springs 1 015580125 Ø 1 015580130 1 015580135 L1 L1555S/BMW-RNT L L1 1 015550303 mm mm 1 015570137 1 015570146 37 28 1 015570156 46 34 56 34 1557V impact sockets for Volvo leaf springs A Max Ø mm mm 1559/22 50 18÷22 1 015590001 1559/36 90 36 1 015590036 mm 1 015570299 1559/45 115 45 1 015590045 27204
1559V/8T 1565/1 - 2 - 3 1568/C15 fork separators for ball joints chain opening and riveting kithydraulic screw for ball joint pullers 1559/36and 1559/45 150 mUmN 1 1/2\"x16 M14x1,5 Ø L1 Nm t 1565/1 Ø L1 1 015590145 1565/2 mm mm 1 01565000180000 8 1565/3 1 015650002 18 65 1 015650003 23 65 30 881560/1 - 1560/2 1566Nball joint pullers, professional type tool for removing/installing steering arms L 1568/C15 420x185x60 mm 1 015680015 Ø A 1568R/CS3 Ø punches for chain openers 1 015600001 ØxL 1 015600002 1 015660005 A Ø mm mm 1 015660008 min÷Max mm 1 015660010 28÷35 x 400 27 mm 20 35÷45 x 190 27 - 20 35÷45 x 400 27 1560/1 12÷501560/2 60÷851560A 1566/GO1ball joint puller homokinetic joint puller Ø1 L 1568R/CS3 Ø2 1 015680503 55 A 1569/A mm assortment of tools for removing and installing 25 rear axle silent blocks, mm driving shaft oil seals and wheel bearings 23,5 L A Ø1 Ø2 • Bushings can be used both on vehicle and on hydraulic mm mm mm mm mm 1 015660052 press • Kit contents: 250 115 29 36 4 threaded bars: M10-M12-M14-M16 4 washers1560A bushings for diameters ranging from 44 mm to 82 mm 1 0156006011561/... 1566Pball joint pullers ribbed axle shaft circlip pliers Pliers compress circlip, making it easier to fix axle shaft into homokinetic joint A A L Ø L 1 015610001 L AØ 1 015610002 L A Max mm mm mm 1 015610003 mm mm 1 015660091 1 0156100041561/1 39 36,6 18 280 361561/2 47 45,7 251561/3 63 62 30 15671561/4 75 63 40 lever for removing wishbone heads and shock absorbers from pillar 1569/A Can be used by one operator 530x415x115 mm 1 0156900111562Dball joint pullerSupplied with 2 screws for pulling suspension and steeringjoints L A Ø B A A mm B min÷Max mmA max Ø L mm mm mm 1 015620239 1060 100÷300 1 015670001 mm 39 26 15550 205
1569/B 1756C 1757Aassortment of tools for removing and installing suction gun, 200 ml, battery fillersilent blocks, oil seals and wheel bearings made of polypropylenediameter: 14÷32 mm • Also suitable for braking system fluid • Double EPDM gasket • Operating temperature: +0 - +50 °C • NOT suitable for fuel 220 mm cc 2000 1 017570020 1756C 1758A 1 017560502 non-return funnel 1756D with quick coupling, Ø 38 mm suction gun, 1500 ml, made of polypropylene For Volkswagen group cars1569/B • Double NBR gasket 1 015690015 • Operating temperature: +0 - +50 °C • NOT suitable for fuel1569/Ftool assortment for removing and insertingFiat Panda, Fiat 500 and Ford Ka silentblocks 500 mm 1758A 1 017580010 1758LG formable, rubber-covered aluminium foil, for canalizing liquids 1756D 1 0175605151569/F 1756C-2OR H 1 015690021 O-rings (pair) for suction guns 1756C1569CP Lstriking toolsfor installing conical bearings and oil seals 1756C-2OR LH 1 017560503 mm mm 1 017580006Quick adjustment 365 168 1756D-2OR 1758M O-rings (pair) for suction guns 1756D funnel Ø L 1756D-2OR 1 017560516 Ø 1757 min÷Max L 1 015690750 battery fillers 1 015690790 mm mm1569CP/50 9,5÷50 1301569CP/90 18÷90 145 L Ø 14 mm D D 1758M L cc mm 4 017570002 mm 1 017580000 4 017570004 250 60 2 017570006 350 500 75 1000 90206
1758R 1759 1759HD/3liquid containers optical analyzer for coolant, battery, cooling system seal testing and circuit filling windscreen and AdBlue® fluids toolsConvenient, removable, flexible spout Supplied in a hard case • Make it possible to check circuit (pipes, joints, pumps, Automatic temperature compensation radiators) for leaks under pressure and quickly fill circuit, Battery acid: measurement range: avoiding air bubble formation 1.1÷1.3 kg/l Propylene coolant: -25 °C ÷ -50 °C Ethylene coolant: -25 °C ÷ -50 °C Windscreen fluid: -25 °C ÷ -40 °C AdBlue: Urea percent measurement: 30% ÷ 45%1758R 3 lt 160 mm1758R 5 1 017580203 3 1 017580205 51758VT cylinder head testing kit 1 017590063Quickly indicates whether expansion tank contains anycarbon dioxide. 1759HD/3 600x500x140 mm - 6,5 kg 1759HD/RR cooling system filling tool1758VT 290x190x50 mm - 1kg 1 017580100 1759 1 017590251 1759A antifreeze densimeter, glass body1758VT/Lcontrast liquid for testing cylinder heads 1759HD/RR 450x310x110 mm - 2,2 kg 1 017590064 L 1759HD/TRUCK truck cooling system testing and sealing tool 1758VT/L 1 017580101 1759A L mm 1 017590001 340 1759B acid densimeter, glass body L 1759B L 1759HD/TRUCK mm 1 017590005 440x330x100 mm - 3 kg 1 017590065 280 207
1759TT 1760B 1760PA/80 digital multimeter AC/DC amperometric clamp, 80AKit of 4 pairs of turbo circuit testing caps,for use with tyre inflators Designed to measure low current leakage or absorption values on vehicles 1759TT 400x160x100 mm - 1,8 kg 1 0175903001760DGT SPECIFICATIONS • Range: 1mA-80A AC/DCdigital automotive multimeter DC voltage: 200 mV-2/20/200/1000V • Torch function with white LED AC voltage: 2-20/200/700V • Backlit LCD display DC current: 2/20/200 mA-20 A • Zero setting function AC current: 2/200 mA- 20 A • Hold function Resistance: 200Ω - 2/20/200 kΩ - 2/20 MΩ • Auto power off Capacity: 2/20/200 nF - 2/200 μF • Power supply: 2 1.5V AAA-type batteries Temperature: -20° + 1000°C/ -4 °F ~ +2000°F Frequency: 20kHz 1760PA/80 Power supply: 1 9V battery (included) 1 017600002 1760B 1760PA/AC-DC 1 017600012 amperometric clamp and digital multimeter 195 1760/OHM A: AC/DC mm V: AC/DC Multimeter/megohmmeter for high voltage insulation testing. TRUE RMS indicator 92 mm CAT. IV 600V CAT. III 1000VTECHNICAL DATA A: AC/DC RPM (tachometer): V: AC/DC 1 017600000For 2 and 4 cylinder enginesRPM4 600 - 4000 RPM SPECIFICATIONSRPM4 600 - 12000 RPM (x10 RPM) DC voltage: 0.1mV ÷ 600VRPM2/DIS 300 - 4000 RPM AC voltage: 0.1mV ÷ 600VRPM2/DIS 300 - 6000 RPM (x10 RPM) AC current: 0.01A ÷ 1000ADwell angle: 4-8 CYL DC current: 0.01A ÷ 1000ADC voltage: 400mV-4/40/400/1000V Resistance: 0.1Ω ÷ 40MΩAC voltage: 4/40/400/700V Capacity: 0.001nF ÷ 40 μFDC current: 40/400mA-4/20A Frequency: 0.001kHz ÷ 4kHzAC current: 40/400mA-4/20A Temperature: -40°C ÷ 1000 °CResistance: 400Ω-4/40/400kΩ-4/40MΩ -40°F ÷ 1832°FCapacity: 40/400nF-4/40/100μFFrequency: 5/50/500Hz-50/500-10MHz 1760PA/AC-DCDuty cycle: 0.1 % - 99.9%Pulse amplitude: 1 - 10ms Measuring range Base accuracyDiode test: Test current 0.3mAContinuity: <150Ω - Test current <0.3mA AC/DC voltage: 50mV - 1000V ±0.06% - ±0.1% rdgDisplay: High-contrast, backlit 4-digit LCDOvervoltage: Category II 1000V AC/DC current: 0.01μA - 10A ±0.5% - ±1% rdgAuto power off: 30 minutesPower supply: 1 9V battery (included) Resistance: 0.01Ω - 50MΩ ±0.2% - ±2% rdgInductive clamp (included)2 tips (included) Meg OHM: 0.01 - 5000MΩ ±4% rdg. max currentSoft cloth case (included)Operating manual 1mA1760DGT Capacity: 5nF - 10mF ±1.5% - ±3% rdg Frequency: 50Hz - 100 MHz ±0.02% - ±0.1% rdg Temperature: -50 °C - +1350 °C ±0.5% rdg Diode test: 3V dc Continuity test: <30 Ω 1760/OHM 1 017600005 1 017600025208
1760/TC2 1760/IR800 1766combination contact/non-contact digital infrared thermometer double suction lifterdigital tachometer with dual laser aiming system 380 mm 30 95 mm mm 120 mm 2 017660001 145 mm L max 2 017660005 kg 1 017660100 50 1766A H single suction cupTECHNICAL DATA TECHNICAL DATA 120 mm Range: -50 °C to +800 °C / -58 °F to +1472 °F• For measuring: Scale selection: °C/°F max- non-contact rotational speed (rpm) Accuracy: ±1.0% or ±1.0 °C to 20 °C- contact rotational (rpm) Laser power: <1mW kgand linear surface speed (m/min or ft/min). Response: 150ms• 5-digit LCD display. Emissivity: 0.10-1.0 adjustable 30• Scale: Distance ratio: (D:S) 20:1- non-contact speed 2.5÷99,999 rpm Operating temperature: 0 °C ÷ 50 °C / 32 °F ÷ 122 °F 1766/8- contact speed 0.5÷19,999 rpm Operating humidity: 10% to 90% RH assortment of 8 tools- linear surface speed 0.05÷1,999.9 m/min. for car glass windows• Frequency: 0.8 sec. Backlit LCD display• Power supply: 4 1.5V batteries, AA size, 1766or 6V power supply unit (not included). Data storage function• Supplied with the following:- adaptor for contact tip measurement; Auto power off- male (contact) rubber tip (2 pcs.); Power supply: 1 9V battery (included)- female (contact) rubber tip (1 pcs.); Soft cloth case (included)- linear measurement tape (1 pcs.);- reflecting tapes; Operating manual- instruction manual;- plastic case. 1760/IR800 1 017600380 1766 LH 1763 8188C mm mm 1 017600161 Car upholstery clip pliers 1766L1760/TC2 230 74 170 mm 1766I1760R/TC2set of reflecting tapes for item 1760/TC2 1763 1 017630001 1763G/S500 500 car upholstery clips 1766G 17711760R/TC2 1 017600561 1763G/S500 1 017630105 1765/C24 1766/8 cases with 24 tools for pulling out car radios 1765/C24 1 017650001 209
1766ER 1766Twindow trim removal tool steel cable for glass windowswith handle triangular sectionAllows window trims to be easily removed,with no risk of damage 0.7 mm 50 m 1 0176600261766ER 1767A 1 017660501 telescopic rod1766Llever for glass windows • designed to support bonnets and tailgates with decompressed pistons. • can be used to keep pedals from moving. 75 mm 340 mm L1766L L 1 017660015 mm1766LI 640 ÷ 1090 lever for inserting car glass window cutting 1 017670000cable 1767PMC magnetic tool holder, roundsharp edges for cutting bonds 290 mm1766LI Ø 1 017660016 150 mm1766Ihandle for steel cable item 1766G 100 mm 1767PMC 1 017670020 80 mm 1767PMR magnetic tool holder, rectangular1766I 365 mm1766G 2 017660020steel cable for car windows 165 mmSquare section 0,7 mm 1767PMR 1 017660025 1 017670010 50 m210
1877 1878 3 1879R/K4exhausted oil drain unit, wheeled, oil collection tank, kit of 4 spare tubes for fluid extractor 1879with 90 l tank for truck hubs• level indicator With oil drip catcher• big diameter pan with breakwater grate; capacity: 12 l• pneumatic tank emptying through 1.8 m pipe• tool tray 1 018790504 1879R/K4 1878 3 lt 1880 1 018780003 3 1878 11 manual barrel pump fluid collection tank • Maximum capacity: 11 l • Fluid drain plug • Interior wall for preventing fluid leakage during transportation gr 1877 1 018770008 1 018800001 1880 2401877Aexhausted oil drain unit / vacuum cleaner, 1878 11 lt 1881wheeled, 1 018780011 pneumatic barrel pump, ratio 3:1with 90 l tank and pre-chamber 11• level indicator 1878 30• big diameter pan with breakwater grate; capacity: 12 l fluid collection tank• transparent pre-chamber: capacity 9.5 l• 1.8 m suction pipe • Maximum capacity: 30 l• pneumatic tank emptying through 1.8 m pipe • Splashproof grate• tool tray • Fitted with 4 pivoting wheelsStandard accessories: 600 mm• 1 hard probe, Ø 5x700 mm• 1 flexible probe, Ø 5x700 mm• 1 hard probe, Ø 6x600 mm• 1 flexible probe, Ø 6x700 mm• 1 flexible probe, Ø 7x700 mm• 1 flexible probe, Ø 8x700 mm• adapters for VW, BMW, CITROËN 100 mm 860 mm l/min 1881 14 1 018810001 lt 1 018780030 1882 1878 30 30 1879 oil gun with flexible end and automatic drip 9.5 l manual/pneumatic operation fluid catcher extractor • 1/2\" • Maximum delivery rate: 65 l/min • Maximum operating pressure: 100 bar • Lockable delivery lever 440 mm Ø 1/2\" 230 mm 14 mm1877A 1879 1882 1 018770080 1 018790001 1 018820010 211
1883 1884/C12 2250-Odigital litre counter for oil case of adapters for item 1884 heavy duty swivel creeper seat with tray • 1/2\" 410 ÷ 530 mm • Shockproof rubber coating • Battery: 1 CR2 (included) 380 mm • Max. delivery rate: 0÷35 l/min 1884/C12 2250-O (0÷9 gal/min) 1 018840100 1 022500011 • Max. pressure: 50 bar 1889 2251-O (750 psi) steel handling and storage base heavy duty swivel creeper seat with drawers • Viscosity: 8÷5000 mPas for 2 200-l barrels • Tolerance: ±0.5% 1 018830035 • Completely hot painted with epoxy powder • Easy to carry with a fork lift truck or a transpallet Ø 1/2\" • Support cannot be placed under any part 410 ÷ 530 mm 1883 380 mm1883NC 740 mmmale-male nipple, 1/2,for items 1882 and 18831883NC 330 1210 mm 2251-O 1 018830135 mm 1 022510011 2252 1889 1 018890200 seat with castors 40 45 cm1884 1895 6 2252 O cmoil filler tool 2252 G for manual and automatic gearboxes and ultrasonic cleaning tank, 2252 Rdifferentials 6l 1 022520001 38 cm 1 022520002Complete with 12 adaptors for direct connection with special degas function 1 022520003 1 022520900 2252-O 2252-G 290 mm 2252-R 2252KR4 1 022540047 spare seat castors1884 - Ultrasonic cleaning relies on fluid heating to effectively clean 2252KR4 1 018840010 spare parts and metal pieces in general (injectors, carburettors,AT-101 valves etc.) 2254TAT-102 FORD - Digital display for temperature and cleaning time selection kneeling padAT-103 UNIVERSAL (Bmw, Honda, Nissan...) - Two cleaning modes: \"soft\" and \"normal\"AT-104 VW-AUDI - For normal cleaning, just use water at a temperature of 50-60 made from non-slip EVA foamAT-105 VW-AUDI-PORSCHE °CAT-106 VW-AUDI-MINI COOPER - For more accurate cleaning, add non-foaming detergent 30 mmAT-107 MERCEDES solutions specific for ultrasonic tanksAT-108 DSG - Using the degas mode speeds up air release throughout theAT-109 VW-AUDI CVT tank, thereby improving ultrasonic cleaning efficiency.AT-110 VOLVOAT-111 TOYOTA-LEXUS TECHNICAL DATAAT-112 SKODA Tank capacity: 6 l VW Passat/Tiguan <2007 Drain tap Power: 150 W Heating power: 300 W Temperature range: 0÷80 °C Cleaning time range: 0-99 minutes Frequency: 40 kHz Power supply: 220/230V Dimensions: 330x180x310 mm 470 mm 1895 6 2254T 1 018950060212
2258-O 1949GPE 2115P L-MQ32heavy duty creeper with tool chest tyre inflator assortment of 32 insulated tools for hybrid • Operating pressure: 0÷11 bars (10÷160 psi) cars, in plastic tool box with soft thermoformed • Pressure release feature tray • Pressure measurement feature 475 mm 450 mm • Gauge coated with schockproof rubber • 360 degree hose rotation2258-O 355 mm L=300mm 1 022580011 145 mm1927SP-AM Ø 1/4\" GAS 2115PL-MQ32 magnetic support for pneumatic impact wrench 1 021150332• Fitted with two high-powered magnets with protective rubber bar 1 019490008 920MQ/55Atops g 89MQ 10-12 mm• Can accommodate 1 1/2\" impact wrench, 4 sockets and 1 850MQ 1/4\"torque wrench 1949GPE 0÷11 640• Capacity: 10 kg 860TX/A10 T7-T8-T9-T10-T15-T20-T25-T27-T30-T40 920MQ/A 8-10-12-13-14-17-19 mm 1949GPN 920MQ/21 125mm tyre inflator, 920MQ/22 250mm ABS housing 1048MQ250 250mm • CE certified pressure gauge with scale 0.7÷12 bars 1150MQ 180mm (graduation: 1/10 bars) • Two servo-controlled buttons allow accurate, quick tyre 1164MQ160 160mm inflating (+) and deflating (-) 1272MQ 4.5X80-6X100mm • Supplied with a calibration certificate 1274MQ 3X100-4X100-5.5X125 • Fitted with a shockproof, protective shell and an eyelet • Fitted with a 1/4\" GAS threaded coupler 1995MQ/G2 G2 • Swivel air inlet for rubber hose, Ø 7 mm CP15L 3000M/LT g 1 019270000 creeper400 • PVC lining with upholstered foamed rubber designed for remarkable comfort1949DGTdigital tyre inflator 245 mm• Operating pressure: 0÷11 bar Ø ADJUSTABLE(2.0÷160 psi) 4 mm HEAD-REST• 4 units of measurement: psi/bar/kgcm2/kpa BY PROGRESSIVE AIR• Backlit LCD display L=1500 mm• Reset feature SPRING• Self-power off after 3 min. 100 mm• Pressure release button 425• Resolution: 0.05 bar mm• ABS housing, protective rubber shell bar g 1 019490011on gauge, shockproof, nonslip handle grip 1020 mm• Power supply: 2 AAA size 1.5V batteries 1949GPN 0,7÷12 810• Compatible with coupling 1916G 1/4\" 1949M 3000M/LT tyre pressure tester 7,3 kg 1 030000220 3000M/RLS spare creeper castors L=530 mm L=350mm 230 mm Ø 1/4\" GAS 60 mm 3000M/RLS bar g 1 019490020 bar psi g 1 019490400 1 0300002061949DGT 0-11 500 1949M 0÷4 5÷60 280 213
3002 3007 3009R/GR4creeper and seat underbody trolley for vehicles 4-wheel groups for trolleys 3009 R/GR4 without forecarriage / rear axle• Steel frame• PVC lining with upholstery Allows vehicles without• Easily convertible into a creeper or a seat forecarriage or rear axle to be easily handled while working • 4 pivoting wheels, including 2 with brakes, suitable for use 1030 mm in painting furnaces • 2 sliding supports to fit all chassis400 mm • max. capacity: 800 kg A 100 mm 3009R/GR4 1 030090501 3010/T... 140 cm jack stands, pair 60 cm 1 030070001 3007 A Max H3002 1 030020001 mm H1 max-min3002/RLS 1106 spare wheels for creeper 3002 3008 L1 L jack and positioner for single and twin truck wheels C max H min H max H1 L L1 • max. capacity: 700 kg kg mm mm mm mm mm • min. height: 140 mm • max. height: 660 mm 2000 280 425 245 185 165 • distance between rollers: 470÷740 mm3002/RLS • hydraulic overloading safety device 3010T 2 1 030020501 • front pivoting wheels 1 0301000023003 C max L L1creepermade of shockproof plastic kg H min H max H1 mm mm 3000 285 430 250 180 195• Wheel Ø: 76 mm 3010T 3 1 030100003 1140 mm470 mm 1000 mm C max L L1 kg H min H max H1 mm mm 6000 400 580 340 245 280 3010T 6 1 030100006 1020 mm 930 mm C max L L1 1 030080100 120 mm kg H min H max H1 mm mm 10000 471 735 420 330 290 30083003 1 030030001 3009 3010T 10 3003/RLS wheel lifter 1 0301000106 spare wheels for creeper 3003 Maximum lifting capacity: 550 kg 4 pivoting rollers Roller width: 200 mm For wheels up to 240 mm in width3003/RLS 1 030030501 A B AB 1 030090001 400÷850 mm 600 mm214
3011/T 3012I 3014SAR/RRhydraulic bottle jacks lower engine bracket 4 spare wheels for engine stand 3014SAR L H L H max-minC max H min H Max L LH 3014SAR/RR kg mm mm mm mm mm 1 030120250 1 030140370 3014SAR/1 1010 mm3500 170 366 86 3012I 630÷960 190 fluid collection tank for item 3014 SAR 30143011T 3,5 engine stand 1 030110035C max H min H Max L 1020 mm kg mm mm mm 1 0301100505000 203 467 118 3011T 5 1 030110100 1 030140361 80 3014SAR/1C max H min H Max L 1 030110150 83 cm cm 1020x1010x11 mm kg mm mm mm 10000 220 484 114 1 0301102003011T 10 69 cm 81 cm 3014SAR/2 clamp for fixing transmission gear on stand item 3014 SARC max H min H Max L kg mm mm mm 3014 1 03014001015000 230 497 1133011T 15 3014R/GR5 5 spare wheels for engine stand 3014 500 mm C max H min H Max L 3014SAR/2 kg mm mm mm 1 03014036220.000 245 521 1153011T 20 3025 folding hydraulic crane with dual effect pump3012engine brackets Maximum capacity: 1 t L 3014R/GR5 1 030140501 L C max 3014 SAR 1650 mm kg 1 030120010 folding engine stand 1560 mm mm 1 030120018 500 • Easy to fold up, for significantly increased compactness1500 400 • Allows 360° rotation of engine or gear • Provides unparalleled safety and stability during jobs1800 Maximum capacity: 450 kg 550 mm3012C 3025 3025 lower engine bracket 1 030250001ideal for cars and commercial vehicles450 mm 1000 mm 3025/RF 1145 mm 2 spare fixed wheels for hydraulic crane 3025 920 mm 1050 mm3012C 3014SAR 3025/RF 1 030120255 1 030140360 1 030250901 215
3025/RG 3026 0,5 3026/SP2 spare swivel wheels for hydraulic crane 3025 hydraulic pit and under bridge jack Universal transmission support Maximum capacity: 500 kg Allows one operator to disassemble and reassemble any transmissions of cars, commercial vehicles and off-roaders quickly and safely. 3025/RG 1140 mm 1 0302509023025/PFbarrel handling pliers 70 mm Maximum capacity: 300 kg 650 mm 1 030260505 3026/SP 1 030260005 3026 0,5 550÷640 3026/R0,5 3027 10 hydraulic bench press with moving piston 4 spare swivel wheels for hydraulic jack 3026 0,5 Maximum capacity: 10 t 3026/R 0,5 1 030260905 A mm B mm 3026 1,0 1250 1 030250011 hydraulic pit and under bridge jack mm3025/PF 550÷640 70 Maximum capacity: 1 t3026 0,3hydraulic pit and under bridge jack 820 mm 3027 10 90 kg 1 030270010 1140 mm 1120 mm 3027 20 hydraulic press with moving piston 650 mm 20 t Maximum capacity: 20 t 3026 1,0 1 030260010 550 mm3026 0,3 3026/S 1 030260003 swivel transmission gear support with reduction bushes for jacks item 3026 1905 Maximum capacity: 500 kg mm3026/R0,34 spare swivel wheels for hydraulic jack 30260,3 950 mm 3027 20 1 030260903 140 kg 1 030270020 3026/R 0,3 3026/S 1 030260501216
3027 30 3027/KPP50 3033/3Thydraulic press with moving piston and hoist hydraulic jack, 3t pedal control for hydraulic press item 3027 long version Maximum capacity: 30 t 20-30-50 • For use on commercial vehicles • Maximum capacity: 3 t • Polyamide wheels 1980 h Max 520 mm 1 030270555 mm 3027/KPP50 3030/2T h Min 140 mm lowered car jack, 2 t with 6 wheels 1180 mm 1150 mm • dual front tilting wheels made of plastic material (PTFE) • car jack can be easily handled on uneven, irregular floors3027 30 • maximum capacity: 2 tons 230 kg 1 030270030 H Max 520 mm3027 50 400 mm 3033/3T hydraulic press with moving piston and hoist 1 030330030 Maximum capacity: 50 t 860 mm H min 3035 85 mm tyre trolley 3030/2T 43 kg -2 castors Ø 260 mm 2200 1 030300020 -2 castors Ø 125 mm mm -Maximum carrying capacity: 200 kg -Forks can be adjusted in 2 positions: first position: maximum opening 880 mm second position: maximum opening 980 mm -Can be used as a top by locking position horizontally 3030/2T-R5 front wheel with pin for jack 3030 2T 3030 2T/R5 1 030300505 1250 mm 3030/2T-R6 spare rear wheel for item 3030/2T 3027 50 1 030270050 350 kg3027/KP 3030 2T/R6 1 030300506set of pin punches and platefor press item 3027 3030/2TRP 5 mm spare 85-mm rubber plate for item 3030/2T3027/KP10 3027 10 3030/2TRP 3035 3027/KP20 3027 20 1 030270510 5 030300501 1 0303501003027/KP30 3027 30 1 0302705203027/KP50 3027 50 1 030270530 217 1 030270550
3040 3041A/11 3042/K6Prear motorcycle stand 6-pin kit for motorcycle stand item 3042adjustable roller sliders, pair for item 3041 (already included in item 3042)• Matt black lacquer• Polyamide slider holder• 4 thermoplastic rubber wheels 3041A/11 1 030410511 3041A/15 cone-shaped sliders, pair 3042/K6P 1 030400001 for item 3041 1 030420101 30433040 3041A/15 motorcycle stand 1 030410515 with left single arm 1 0304300013040A/1V-shaped sliders, pair • Matt black lacquerfor item 3040 • Polyamide slider holder • 4 thermoplastic rubber wheels 3041T 1 030400501 3043 front motorcycle stand, high, adjustable, with radial calipers 3043A/41÷47 pin3040A/1 for item 30433040A/2 - Matt black lacquer - Polyamide slider holderL-shaped sliders, pair, made of rubber - 4 thermoplastic rubber wheelsfor item 30403040A/2 3043A/41 Ø 1 030400502 Ducati mm 1 030430541 3043A/42 1 0304305423040A/6-8-10 3041T Triumph 21,8 1 030430543 1 030410011 3043A/43 27,5 1 030430544pawls, pair, made of aluminium MV - Ducati 42 1 030430545for item 3040A/1 3043A/44 40 1 030430546 Ducati 1098 28,6 1 030430547 3041T/17 3043A/45 30 1 030400506 Honda 52,9 1 030400508 L-shaped sliders (pair), made of rubber, for 3043A/463040A/6 1 030400510 radial calipers BMW F800SM6x1 mm for item 3041T 3043A/47Aprilia, Yamaha, Triumph BMW K,R,S3040A/8M8x1.25 mm 3041T/17 Suzuki, Honda, Ducati 1 0304105173040A/10 3042M10x1.25 mm front standKawasaki for motorcycle steering pin3041 • Matt black lacquerfront motorcycle stand • 4 thermoplastic rubber wheelsadjustable • Includes a 6-pin kit• Matt black lacquer• Polyamide slider holder• 4 thermoplastic rubber wheels 3041 3042 1 030410001 1 030420001218
3063/2,5T 3065/40-20T air hydraulic jack, 2.5 tons, wheeled air hydraulic jack, 40/20 tons 3061/2Tair hydraulic jack, 2 tons - 2 stages Particularly suitable for use on cars and commercial vehicles • suitable for use on heavy vehicles Ideal for garages, tyre repairers' and body shops • functional and easy to handle, for transportation on mobile repair shops as well FITTED WITH: • automatic piston return • automatic arm return • two descent valves with under load speed control • full-load speed control TECHNICAL DATA TECHNICAL DATA capacity: 40/20 tons capacity: 2.5t weight: 39 kg weight: 75 kg power supply pressure: 8-10 bar power supply pressure: 8-10 bar air consumption: 400 l/min air consumption: 400 l/min 3065/40 20T 1 030650200Fitted with: 3067/70-13T• high-resistance three-layer diaphragm and internal telescopic air hydraulic jack, 70-43-23-13 tguide• end-of-stroke stop and overloading safety valve • can also be used on auto lifts 1 030630125 3063/2,5TTECHNICAL DATAcapacity: 2 tweight: 14 kgpower supply pressure: 8-10 barheight: min.132 - max. 326 mm3061/2T 1 0306100203061/2T-P5050-mm extension for item 3061/2T3061/2T P50 1 0306100213061/2T-P100 Long version, suitable for use on lorries, articulated vehicles,100-mm extension for item 3061/2T buses and coaches, and agricultural machines • automatic piston return • two descent valves with under load speed control TECHNICAL DATA capacity: 70-43-23-13 tons weight: 74 kg power supply pressure: 8-10 bar air consumption: 600 l/min3061/2T P100 3067/70 13T 1 030610022 1 030670130 219
INSULATED TOOLS BiAn1eTaslio0ttlsFntoaA0oEaodpslfNlrs0Ulrluvatloo6Vtabiehtpfve0sjrieieBpoon9disfcinens0iyeonntti0rglaeaasfitti’’dnlsshutamatndelneniatineednrodtehssnnseaulitstaeufgdrllhsateclahaaeitttmenaeatnorsgefdnpdioeoctdpdltclascrlopqoutotlooruohwmrvmlmosaeroeipeadnllarpaisanktmgirlbnyegiteaaytosaaraneibtftttenohncnurioedpreidiamlnmntonbgpwu,sieceneeepsiaasetdnraitnnhtfbtcmodottElcErterueotea1hmNrorntsyio5dgo’astpsg6a0hsn,eunw0s0:accsavo9aneVheoerrf0aalceewsktonen0attinrrotdytag,ethe.nlniedeelfeetidiacshrtvraacyeeeaertshscnsisdotttptistenseoc(msti1counaeis0lsfrncirtc0ctuieatie0opuntitn0toit.osnVons.)s.of Istituto Italiano del Marchio di Qualità - I Verband der Elektrotechnik Elektronik Informationstechnik - D220
52MQ 850MQ 920MQ/Tsingle open end wrenches 1/2” square drive, T-handle magnetic bit holder, insulated, L with bimaterial handle L D L1 1 008500910 L1 1 009200807 IMQ CSV L L1 D LEN 60900 mm mm mmL 233 125 12.5mm mm EN 6090010 110 920MQ/A11 120 1 000520110 hexagon sockets L L112 132 1 000520111 mm mm13 140 1 000520112 14 146 1 000520113 Ø 200 16315 166 1 00052011417 168 1 000520115 L 920MQ/55A19 176 1 00052011722 200 1 000520119 Ø1 1/2” square drive reversible ratchet24 225 1 000520122 with socket locking system 1 000520124 89MQ EN 60900 1 009200238 Lsingle ring wrenches 1 009200239 Ø L Ø1 1 009200240 A L 1 009200241 mm mm mm mm 1 009200242 1 009200243 8 21,5 57 27,5 1 009200244 9 21.5 57 27,5 1 009200246 10 21,5 57 27,5 1 009200247 11 21,5 57 27,5 1 009200248 D 12 23,0 57 27,5 1 009200249 13 23,0 57 27,5 1 009200250 EN 60900 14 23,0 57 27,5 1 009200252 1 009200809 16 23,0 57 27,5 1 009200254 L DA 17 30,0 57 27,5 mm mm mm 18 32,0 57 27,5 240 50 89EN 60900 19 32,2 57 27,5 20 32,0 57 27,5L 22 36,0 57 27,5 920MQ/C16mm mm 24 39,0 57 27,5 9 hexagon sockets, 3 socket drivers for hexagon screws10 170 1 000890110 920MQ/PE and 4 accessories11 180 1 000890111 socket drivers for hexagon screws12 190 1 000890112 13 195 1 000890113 L 14 200 1 000890114 15 210 1 000890115 Ø 17 218 1 000890117 EN 6090019 240 1 000890119 L122 255 1 00089012224 280 1 000890124110MQ Ø L L1 EN 60900adjustable wrench with scale mm mm mm L 5 28,5 94,5 10,5 920MQ/C16 6 28,5 94,5 10,5 1 009200265 1 009200917A 8 28,5 94,5 10,5 1 009200266 10 28,5 94,5 10,5 1 009200268 920MQ/A 8 - 10 - 12 - 13 - 14 - 12 28,5 94,5 10,5 1 009200267 1 009200269 17 - 19 - 22 - 24 mmEN 60900 920MQ/21 920MQ/PE 5 - 6 - 8 mm 1 001100525 1/2” square drive extension bar LA 920MQ/21 135 mmmm max Ø 920MQ/22 264 mm 920MQ/55A250 30 EN 60900 920MQ/T L 606MQ/50 420x280x60 mm - 5,2 kg click-type torque wrench with reversible ratchet LØ 943MQ mm mm 1 009200804 hexagon nut spinners with handlesL 135 28 L1 920MQ/22 D 1/2” square drive extension bar L1 L EN 60900 EN 60900 ØUNI EN 26789 L L1 D ISO 6789 EN 60900 mm mm mm mm 1 009430235 LØ 1 009430236 AL mm mm L 5,5 233 125 12,2 1 009430237 1 009200805 6 233 125 12,5 1 009430238Nm Kgfm lbf.ft mm mm g 264 30 7 240 125 14,3 1 0094302405÷50 0,5÷5 4÷40 90 375 1130 8 240 125 15,3 1 009430243 10 252 125 17,3606MQ/50 13 252 125 21,3 1 006060705 221
1048MQ 1128MQ slip joint pliers, boxed joint electrician's scissors, stainless steel blades, • Chrome-plated finish with microteeth L1 L1 943MQ/S6 L 5,5-6-7-8-10-13 mm 1 009430250 1 011280101 A L EN60900 IEC60900 L L1951MQ L A max L1 T-handle wrenches with hexagon 1 010480315 145 45male ends mm mm mm 250 48 39 1082MQ 1132MQ diagonal cutting nippers cable cutter with insulated handles L1 for copper and aluminium cables L1 L EN 60900 L L1 L Lmm mm mm 1 009510704 1 010820094 1 009510705 EN 60900 1 010820096 EN 60900 4 165 105 1 009510706 1 0113201935 170 105 1 009510708 L L1 L6 168 105 mm mm mm mm mm8 165 105 140 20 1,6 230 18 160 22 1,6993MQ 1084MQ 1142MQbent knurled point spring tweezers heavy duty diagonal cutting nippers wire stripping pliers L1 LEN 60900 L L L EN 60900 EN 60900 mm 1 009930040 1 010840100 1 011420096 L L1 L147 mm mm mm mm mm² 200 26 2,0 160 0,5÷6994MQ 1088MQ 1150MQstraight knurled point spring tweezers end cutting nippers combination pliers, bright chrome-plated L1 L L EN 60900 L L1 1 011500096EN 60900 mm mm mm EN 60900 L 1 011500098 1 011500100 L 160 7 1,6 L1 L L1 1 011500102mm mm mm mm 2115P L-MQ32145 1 009940040 160 37 1,6 2115PL-MQ32 180 39 1,81010MQ 200 43 2,0long round nose pliers 220 46 2,0 1162MQ 1 010880096 extra long flat nose pliers L1 L1 L L EN 60900 213,257 EN 60900 1 010100096 mm 1 011620096 L L1 L L1 1 011620100 mm mm mm mm 1,6 1,6 160 51,5 160 56 200 76222
1164MQ 1273MQ/D6 1725MQ extra-long bent flat nose pliers set of 6 screwdrivers mini-hacksaw frame L1 H 150 mm L 1 017250030 L LH L L1 mm mmmm mm mm 1725MQ 260 85160 54 1,6200 76 1,6 1777MQ/C 1 011640096 cable stripping knife, insulated 1 0116401001166MQ 1273MQ/D6 extra long needle nose pliers 1274MQ 1 012730851 1272MQ 0,5x3x100 -0,8x4x100 ● for multicore cables 1,0x5,5x125 mm PH0x3x60 -PH1x4,5x80 PH2x6x100 mm L1 1274MQ L screwdrivers for headless slotted screws mm L 1777MQ/C 190 1 017770026 1 011660096 L 1 011660100 L1 LEN 60900 1777MQ/U mm cable stripping knife, insulated L L1 mm mm 1,6 D 3 012740700 1,6 3 012740703160 56 S 3 012740706 200 76 3 012740709 EN 60900 3 012740712 1168MQ L1 2 012740715 L 1 017770011extra long bent needle nose pliers SxDxL mm 2 012740718 mm 175 1777MQ/U L L1 0,4x2,5x75 200 mm 0,5x3x100 207 0,8x4x100 232 190 1x5,5x125 268 1,2x6,5x150 301 1777RL/U 1,2x8x175 326 4 spare blades for utility knife 1777MQ/U 1,6x10x200 L EN 60900 20 mm 1 011680096 mm 1 017770021 L L1 1 011680100mm mm 1,6 50 mm 1,6160 50 1777RL/U200 70 1995MQ/T1272MQ 1274MQ/S6 insulating mat 0,5x3x100-0,8x4x100 1 012740751screwdrivers 1x5,5x125-1,2x6,5x150for cross head Phillips® screws 1,2x8x175-1,6x10x200 mm L1 1279MQ screwdrivers for cross head L Pozidriv®-Supadriv® screws 3 012790703 D L L1 3 012790709 1000x1000 mm 4 mm 3 012790718 EN 60900 L1 EN 60900 L1 2 012790724 VDE 0303 mm 3 012720703 mm 1 019950030 PHxDxL 3 012720709 L LxSxH mm 160 3 012720718 PZ mm 160 mm 187 2 012720724 1870x3x60 218 2 012720727 0 60 218 1995MQ/T 1000x1000x41x4,5x80 276 1 80 2762x6x100 326 2 100 1995MQ/G1 - G23x8x150 3 150 insulating gloves in latex4x10x200 L 1272MQ/S5 EN 60903PH0x3x60-PH1x4,5x80 1 012720751PH2x6x100-PH3x8x150 LPH4x10x200 mm 1279MQ/S4 Gr. mm PZ 0-1-2-3 1 012790751 1 019950010 1995MQ/G1 9 410 1 019950013 1995MQ/G2 10 410 223
42INOX combination wrenches made of stainless steel L STAINLESS STEEL STAINLESS STEEL L + NO STAINLESS + STAINLESS mm mm 2 000420306 2 000420308 STEEL= RUST STEEL= NO RUST 6x6 95 2 000420310 8x8 116 2 000420311 THE BETA INOX TOOLS CAN BE 10x10 137 2 000420312 AUTOCLAVE STERILIZED AT 121 °C 11x11 148 2 000420313 12x12 158 2 000420314 The BETA INOX tools can be used in critical 13x13 169 2 000420315 environments - that is, in areas where the 14x14 180 2 000420316 minimum level of contamination is not permitted. 15x15 190 2 000420317 Some examples are: 16x16 201 2 000420319 • Nuclear applications 17x17 212 • Pharmaceutical production - class C 19x19 233 • Offshore applications 1 000420391 • Biotechnological and biomedical laboratories 42INOX/S11 • Food industry. 6-8-10-11-12-13- 14-15-16-17-19 mm 1 000420387 The Beta Inox tools avoid improper rust 1 000420103 formation. 42INOX/SC9 Whenever any tools other than those made 8-10-11-12-13-14-15-17-19 mm of stainless steel are used on stainless steel 42/SCV9I 1 000420356 screws, nuts or surfaces, a few particles may 1 000420358 come off the tools, thereby triggering corrosion. 42INOX-AS 1 000420360 This often results in aesthetic problems and, combination wrenches, 1 000420361 sometimes, in structural problems as well. made of stainless steel 1 000420363 Examples of applications are: 1 000420364 • Shipyards L 1 000420366 • Building 1 000420367 • Solar systems L 1 000420369 • Car industry. \" mm CHARACTERISTICS 1/4x1/4 95 Accurate selection of the materials1 and the 5/16x5/16 116 expert quest for the best heat treatment provide 3/8x3/8 137 the Beta Inox tools with mechanical characteristics 7/16x7/16 148 which far exceed the standards and are 1/2x1/2 169 comparable to those of the other Beta tools. 9/16x9/16 180 5/8x5/8 201 These tools share the same ergonomic 11/16x11/16 212 properties and design as the other Beta tools, 3/4x3/4 233 which have been known to, and appreciated by, professional users for over 75 years. Stainless steel is 100% recyclable, which is also a major plus. 1 Beta Utensili uses magnetic stainless steel AISI 420224
42INOX-AS/S9 96BPINOX-AS/B8 1/4-5/16-3/8-7/16-1/2 1 000420396 5/64-3/32-1/8-5/32- 1 0009620009/16-5/8-11/16-3/4 3/16-7/32-1/4-5/16 1 000961459 96BPINOX/BV 96TINOX-AS/S7 3/32-1/8-5/32-3/16- 1 000961877 7/32-1/4-5/1696BPINOX 96TINOXball head offset hexagon key wrenches, offset hexagon key wrenches, 1290INOXmade of stainless steel with high-torque handles, screwdrivers for slotted head screws made of stainless steel made of stainless steelL L1 L1 L1 L L L L1 Ø mm mm mm g 4 000961441 4 000961442 A 2 91 22 4 4 000961443 2,5 91 22 6 4 000961444 S 3 101 24 11 4 000961445 4 112 29 19 4 000961446 L L1 5 131 33 32 2 000961447 2 000961935 6 154 36 51 2 000961448 mm mm mm 2 000961936 7 164 40 65 2 000961450 2.5 153 55 2 000961938 8 175 44 116 3 153 55 2 000961940 SxAxL L1 Ø 10 197 51 189 2 000961941 4 179 70 2 000961942 mm mm mm 4 012900403 5 200 84 2 000961943 4 012900409 2 000961944 0.4x2.5x50 146 2.5 4 012900430 0.5x3x75 171 3.0 4 012900442 6 221 95 0.8x4x100 196 4.0 4 012900451 7 236 106 8 255 117 1.x5.5x150 259 5.0 1.2x6.5x150 270 6.0 10 285 13296BPINOX/B6 1292INOX2,5-3-4-5-6-8 mm 1 000961455 screwdrivers for cross head Phillips® screws, 1 000961456 made of stainless steel96BPINOX/B92-2,5-3-4-5- 1 000961459 6-7-8-10 mm L196BPINOX/BV L96BPINOX-AS 96TINOX/S5 ball head offset hexagon key wrenches, 2,5-3-4-5-6 mm 1 000961952made of stainless steel 1 000961954 96TINOX/S8L 2,5-3-4-5- D 6-7-8-10 mm L1 96TINOX-AS PHxDxL L1 offset hexagon key wrenches, mm mm 4 012920403 with high torque handles, 4 012920409 made of stainless steel 0x3x60 156 4 012920418 189 1x4.5x80 220 L 2x6x100 L L1 1293INOX/D8 \" mm mm g 4 000961989 4 000961990 screwdriver set5/64 91 22 5,5 4 000961991 made of stainless steel3/32 91 22 5,3 4 0009619927/64 101 24 10,5 4 000961993 L11/8 101 24 10,7 4 0009619949/64 112 29 18,7 2 000961995 L L1 Ø 5/32 112 29 18,7 2 000961996 \" mm mm mm 2 0009618613/16 131 33 31,5 2 000961997 2 0009618627/32 154 36 50,0 2 000961998 3/32 153 55 3 2 0009618631/4 164 40 70,0 2 000961999 7/64 153 55 4 2 0009618645/16 175 44 115,0 1/8 179 70 4 2 0009618653/8 197 51 186,5 9/64 179 70 5 2 000961866 5/32 200 84 6 2 000961867 3/16 200 84 6 2 000961868 7/32 221 103 7 2 000961869 1 012930408 1/4 236 106 8 2 000961870 1293INOX/D8 5/16 255 117 10 3/8 285 132 12 1290INOX 2,5x50-3x75 1292INOX 4x100-5,5x150-6,5x150 mm PH0x60-PH1x80 PH2x100 mm 225
C04TSS-7 700mobile roller cab with seven drawers, made entirely of stainless steel kgMain features:• Seven drawers (570 x 410 mm) with ball bearing slides;6 drawers, 83 mm high;1 drawer, 170 mm high;• 4 castors Ø 125 mm2 fixed and 2 steering (two with brakes);• Front centralized lock;• Frame made entirely of stainless steel• Castors, supports, ball bearings, drawer interiorsand guides made of stainless steel• Drawer handles made of aluminium 63 kg 83 mm 25 kg 170 mm 30 kg C04TSS/7 1 024003077226
SPARK-PROOF TOOLSCToithOnpheePatrhtPaertEeipoRqrnue-sisBreienEnsuRcpeseanIirLvnokigLrf-opIfpUnlraeomMmrofefemncttaoCtslboyullses-auBnlabitqerjieemucidstaspgteonocerpitaoigcltla,yesncdeotesiras,rlioogrsrnisieofkodnro-frfoaerensxysispaatlfopaespnitloicntao,toiolsn.s Tba9hyne9dt/hB9Teee2tsF/aEteiCdsnepg. ra,arBlkApInrMsot,oitfuutntodeoelfrsorEauMrreoacpteeerratinaiflisDediRreecsteivaerch AGTCAEDLSXUAESSSTSSIAFsmvnauaItpibaCmxpArsrtoeeuoantacAausparstlipoeemranrepTirunrciornheHoosZeiedtroIesfsawcOsOdmrepIooaoehisGZinhfrinNninriNstceccopOtawtthHEioforfrrnhorneienhNmsefueOardrssi0iqocencbnlEeifoflushuooqFunenattesrnushita2xmgmnnlteteyfnApii0gotnbnpmllofpyroeulteooeR.lfarsxoylrrfeogbi.impduovasEnalluseedeogsolssAnsy,tfitvoiaSAnoerrmangtaSimsaoxsAurct,oUeuaanbcMcvsartilsuromaeapBtriuiraEphnosooZeiLdnoeJnpsfawlDOcuriepoakOeEnehriZrhfeniNoIasriocecclCUOWrtywaorimhEiornoennmthNmTMnoaadsti1ichilnbnEisoosflhe-oTutcctetapishia2ccnfxmsOoeteaungpi1brrlmsrlimafeoklooieiEtoaenxsfiroonbmpildvynXanfallueeoo.tloslosPrytfmi.viaLneaAlsOminoafuvctiaEibaStmxcAcpsrtduielXuoatnoosIooararsOwtupueemnanTiprenidisscrolnhooNlZreoRhLetnaooepfsarwoOslotfcrpeiaOiEmkrehoirRccZihritnNnemrisnuoicecpMOsWliawrmyItahEosretb,hSnetlnhNrituwbeaEsdoiofsi2iotuKocnniEo,piflnfldoLshslronieeoatfttcprahYoiila2rxmtmnbcyieatennp.slu2glritedmlklshiorfyoeooooei.ofdaissxnnerflrgubtyimptvsabasnlfleeptooutosoooerst,icrfn,rimacviaoueaadrilr, WARNING! Risk of explosion in ACETYLENE environment The mechanical characteristics of sparkproof tools differ from those of normal steel tools. Sparkproof tools should be used with extreme caution, avoiding overloads. 227
30BA 42BA 55BA sparkproof drift punches sparkproof combination wrenches, open bi-hex sparkproof double open end wrenches ring ends L L Ø L ØLS L L mm mm mm 1 000300806 mm mm 1 000420806 mm mm 1 000550801 1 000300808 1 000420807 1 000550802 5 150 15 1 000300810 6x6 105 1 000420808 6x7 90 1 000550795 8 150 17 7x7 105 1 000420809 8x9 100 1 000550797 10 150 19 8x8 120 1 000420810 8x10 100 1 000550803 1 000310853 9x9 120 1 000420811 9x11 110 1 000550804 31BA 1 000310854 10x10 135 1 000420812 10x11 120 1 000550799 sparkproof pin punches 1 000310856 11x11 135 1 000420813 12x13 130 1 000550805 1 000310858 12x12 150 1 000420814 13x14 133 1 000550806 L 13x13 150 1 000420815 14x15 145 1 000550807 Ø 14x14 175 1 000420816 14x17 150 1 000550809 1 000320811 15x15 175 1 000420817 16x17 165 1 000550811 ØL 16x16 195 1 000420818 18x19 170 1 000550813 mm mm 17x17 200 1 000420819 20x22 185 1 000550815 18x18 215 1 000420820 21x23 210 1 000550817 3 110 19x19 220 1 000420821 22x24 210 1 000550818 4 110 20x20 230 1 000420822 24x26 230 1 000550819 6 115 21x21 240 1 000420824 24x27 230 1 000550820 8 120 22x22 250 1 000420827 25x28 230 1 000550822 24x24 268 1 000420828 27x29 246 1 000550826 32BA 27x27 290 1 000420830 30x32 265 1 000550828 sparkproof centre punch 28x28 290 1 000420832 36x38 320 1 000550829 30x30 313 1 000420835 36x41 335 1 000550830 L1 L 32x32 333 1 000420836 41x46 355 1 000550831 35X35 360 1 000420838 46x50 370 1 000550832 Ø 36x36 355 1 000420841 50x55 385 mm 38x38 430 1 000420846 55x60 415 41x41 430 1 000420850 10 46x46 480 1 000420855 55BA-AS 50x50 520 1 000420860 sparkproof double open end wrenches 34BA 55x55 560 1 000420865 sparkproof flat chisels 60x60 580 1 000420870 65x65 595 L 70x70 630 A L LA mm mm 42BA-AS L sparkproof combination wrenches, open bi-hex \" mm 1 000550853 200 22 ring ends 1 000550854 250 23 3/8x7/16 110 1 000550857 300 24 L 1/2x9/16 130 1 000550859 5/8x11/16 160 1 000550865 39BA 3/4x13/16 180 1 000550868 sparkproof wedges 7/8x15/16 210 1 000550870 1x1.1/16 230 1 000550872 L 1.1/8x1.3/16 245 A 1.1/4x1.5/16 255 LA L 58BA mm mm 1 000340801 \" mm 1 000420950 sparkproof open end slogging wrenches 1 000340803 1 000420951 150 40 1 000340802 3/8x3/8 128 1 000420953 L 230 40 7/16x7/16 135 1 000420954 250 40 1/2x1/2 140 1 000420956 L 9/16x9/16 163 1 000420957 mm mm 1 000580817228 5/8x5/8 177 1 000420959 1 000580819 11/16x11/16 195 1 000420961 17 125 1 000580822 3/4x3/4 215 1 000420962 19 125 1 000580824 13/16x13/16 230 1 000420964 22 135 1 000580827 7/8x7/8 235 1 000420965 24 150 1 000580830 15/16x15/16 256 1 000420967 27 165 1 000580832 1x1 266 1 000420969 30 180 1 000580836 1.1/16x1.1/16 283 1 000420970 32 190 1 000580838 1.1/8x1.1/8 297 1 000420973 36 210 1 000580841 1.3/16x1.3/16 308 38 220 1 000580846 1.1/4x1.1/4 324 41 230 1 000580850 46 240 1 000580855 50 255 1 000580860 1 000390801 55 305 1 000580865 1 000390802 60 315 1 000580870 1 000390803 65 335 1 000580875 70 370 1 000580880 75 375 80 400
78BA 90BA 95BAsparkproof bi-hex ring slogging wrenches sparkproof double ended offset ring wrenches double ended flat ring wrenches, sparkproof L L LL L L mm mm 1 000780817 mm mm 1 000900801 mm mm 1 000950801 1 000780819 1 000900802 1 00095080217 145 1 000780822 6x7 122 1 000900803 7x9 115 1 00095080419 145 1 000780824 8x9 128 1 000900806 115 1 00095080522 165 1 000780827 10x11 155 1 000900808 8x10 140 1 00095080624 140 1 000780830 12x13 175 1 000900809 140 1 00095080727 155 1 000780832 14x15 200 1 000900811 10x11 145 1 00095080930 165 1 000780834 14x17 220 1 000900812 165 1 00095080832 180 1 000780836 16x17 230 1 000900815 10x12 170 1 00095081034 192 1 000780838 16x18 235 1 000900818 185 1 00095081236 208 1 000780841 18x19 265 1 000900820 12x14 185 1 00095081538 215 1 000780846 20x22 295 1 000900821 200 1 00095081741 225 1 000780850 21x23 298 1 000900822 14x17 230 1 00095082046 245 1 000780855 22x24 315 1 000900823 16x18 25550 250 1 000780860 24x26 333 1 000900824 17x19 29555 265 1 000780865 24x27 340 1 000900826 18x1960 275 1 000780870 30x32 395 1 000900828 19x2265 295 1 000780875 34x36 410 1 000900829 21x2370 310 1 000780880 36x41 450 1 000900830 24x2775 325 41x46 470 30x3280 340 46x50 490 91BA 96BA sparkproof heavy duty offset ring wrenches sparkproof offset hexagon key wrenches78BA-AS Lsparkproof bi-hex ring slogging wrenches Ø L1 L L Ø L L1 \" mm 1 000780910 mm mm 1 000910824 mm mm mm 1 000960760 1 000780912 1 000910827 1 000960762 1.1/4 177 1 000780914 24 38 1 000910830 1,5 50 17 1 000960761 208 1 000780916 42 1 000910832 2 50 16 1 000960763 1.7/16 225 1 000780918 27 48 1 000910836 2,5 56 20 1 000960764 243 1 000780920 49 1 000910841 3 63 21 1 000960765 1.5/8 254 1 000780922 30 54 1 000910846 4 69 25 1 000960766 264 1 000780924 62 1 000910850 5 78 29 1 000960767 1.13/16 275 1 000780926 32 69 1 000910855 6 88 33 1 000960768 286 1 000780928 75 7 93 34 1 000960769 2 311 1 000780930 36 82 8 97 36 1 000960770 325 9 104 37 1 000960772 2.3/16 355 41 10 110 39 46 12 122 44 2.3/8 50 2.9/16 55 2.15/16 3.1/8 92BA 3.1/2 sparkproof tubes for item 91BA89BA L 96BA/BPspark-proof single ring wrenches Ø ball head offset hexagon key wrenches, sparkproof L L 91BA Ø L mm mm mm 1 000920810 1 000920820 L1 92BA/1 460 24÷30 25 1 000920830 92BA/2 610 32÷41 28 92BA/3 760 46÷55 32L 93BAmm mm 1 000890810 1 000890811 ratcheting double-ended offset ring wrench for10 200 1 000890812 scaffolding bolts, sparkproof11 210 1 00089081312 220 1 000890814 L L L1 13 230 1 000890816 mm mm mm 1 00096180014 240 1 000890817 L 1 00096180116 260 1 000890818 mm 1 000930821 1,5 50 16 1 00096180217 270 1 000890819 mm 2 50 16 1 00096180318 280 1 000890820 345 2,5 63 20 1 00096179919 300 1 000890822 21x22 3 60 20 1 00096180420 310 1 000890824 3,5 70 25 1 00096180522 330 1 000890827 4 66 25 1 00096180624 350 1 000890830 5 75 28 1 00096180827 370 1 000890832 6 84 32 1 00096181030 400 8 92 36 1 00096181232 420 10 102 40 12 113 45 229
99BA 378BA 921BA sparkproof bi-hex socketssparkproof hook wrenches with square noses, sparkproof pipe wrench, Swedish pattern,for ring nuts UNI/ISO 2982, 2983 made from copper/beryllium alloy L Ø A L Ø A Ø L mm 1 009210808 mm mm mm 1 009210809 mm 4,0 1 000990803 1 009210810 4,5 1 000990805 8 24,0 40 1 00921081132-75 4,5 1 000990811 9 24,0 40 1 009210812 10 16,5 40 1 00921081350-120 11 17,5 40 1 009210814 1 009210815115-170 1 009210816 1 009210817 12 18,5 40 1 009210818 13 19,5 40 1 009210819 14 20,0 40 1 009210820110BA 15 21,5 40 1 009210821sparkproof adjustable wrenches 16 24,0 40 1 009210822 LØ 17 25,0 40 1 009210824 mm max \" 1 003780800 18 25,0 40 1 009210825 1 003780801 19 28,0 42 1 009210826 L 430 1\" 1/2 gas 1 009210827 530 2\" gas 1 009210828 1 009210830 1 001100810 20 29,0 42 1 009210832 1 001100815 21 30,0 43 A 1 001100820 22 30,5 43 1 001100825 386BA 1 001100830 24 34,0 43 1 001100837 sparkproof heavy duty reversible 25 36,0 43 L A 1 001100845 chain pipe wrenches 26 37,5 43 mm max 1 001100860 27 37,5 45 28 38,9 46 100 13 30 41,5 46 18 32 43,5 46 150 24 30 L 921BA/21 - 921BA/22 200 36 Ø L1 sparkproof 1/2\" wobble extension bars 46 250 55 L Ø L1 65 mm max mm mm 300 600 100 470 375 900 200 750 450 600330BA Lsparkproof pipe cutters for gas pipes Ø Ø LØ 1 003860806 mm mm 1 009210842 1 003860809 921BA/21 125 30 1 009210844 L 921BA/22 250 31330BA /2 Ø L 921BA/25 max mm 1 003300802 sparkproof 1/2\" drive universal joint 50 mm 375 2\"330BA/2R Lspare pin and knife for gas pipe cutter 330BA,sparkproof Ø LØ 1 009210845 mm mm □ ■ 80 25 1/2 1/2 1 003300822330BA /2-R363BA 921BA/42sparkproof heavy duty pipe wrenches sparkproof 1/2\" drive sliding T handle L Ø LØ Ø L 1 003630815mm max max mm 1 003630820 1 003630825150 1/2\" gas 20 1 003630830200 1\" gas 30 1 003630835250 1\"1/2 gas 49 1 003630845300 2\" gas 60 1 003630860350 2\" gas 60450 2\"1/2 gas 76 L600 3\" gas 90 mm 250 1 009210846230
921BA/50 926BA/50 964BA sparkproof 1/2\" drive sparkproof 3/4\" push-through drive ratchet sparkproof wrench bungs push-through square ratchet L L L L mmLD A A L DA A 385 D mm mm mm D 1 009640801 964BA/Lmm mm mm 300 61 22 universal shears for barrels,250 45 16,5 1 009210850 1 009260880 sparkproof 921BA/R50 926BA/R50 For opening edged metal barrels sparkproof sparkproof spare set spare set L1/2\" 1 009210851 3/4\" 1 009260881926BA 937BAsparkproof bi-hex hand sockets hexagon socket wrenches, sparkproof L L mm 1 009640821 L 964BA/L Ø 510Ø L A 965BA safety valve wrenches, sparkproof mm mm mm 1 00926082424 40 55 1 00926082626 40 55 1 00926082727 40 55 1 009260828 1 009260830 L A L 1 009260832 1 00937081328 41 55 1 009260834 mm mm mm 1 00937081730 43 60 1 009260836 1 009370819 1 009260838 13 240 45 1 009370822 A1 1 009260841 17 260 51 1 009370824 A32 45 60 1 009260846 19 270 55 1 00937082734 48 60 1 009260850 1 00937083036 50 60 22 278 59 1 009370832 24 286 63 1 00937083638 53 60 27 294 69 1 00937084141 57 6546 63 65 30 302 75 A A1 L 32 310 81 mm mm mm 1 00965083050 68 70 30 44 200 1 009650832 36 330 85 32 50 300 1 009650835 41 350 90 1 009650840 35 47 250 1 009650845 40 50 300 1 009650848 45 58 350 1 009650850 926BA/22 48 62 375 1 009650855 sparkproof 3/4\" drive extension bars 961BA 50 67 400 1 009650860 sparkproof scrapers 55 73 450 1 009650865L 60 79 500 1 009650870 L 65 82 550 Ø A 70 85 600 LA 966BA mm mm 1 009610802 sparkproof safety valve wrench 1 009610806 250 39 350 55 LØ 963BA mm mm 1 009260872926BA/22 200 38 sparkproof pry bars with pointed and flat bent ends 926BA/42 sparkproof 3/4\" drive slide T-handle A L L1 L L A L L L1 Ø min÷max Ø L mm mm mm mm mm mm 24 1 009630801 1 009660801400 1 009260876 500 24 1 009630803 350 40 50÷150 800 30 1 009630805 1000 231
966BA/V 1082BA 1166BAsparkproof safety valve wrenches sparkproof diagonal cutting nippers sparkproof extra-long needle knurled nose pliers L1 L1 LL L L1 L L1 L L1 mm mm 1 010820801 mm mm 1 011660815 Ø 160 22 150 54L L1 Ø min÷max 1137BA 1270BA 1 009660812 blasting pliers sparkproof screwdrivers for slotted headmm mm mm 1 009660814 screws370 36 125÷250430 48 250÷400 1032BA L1 L1sparkproof internal circlip pliers, straight Lpattern, L APVC-coated handles L L1 AxL L1 mm mm mm mm 1 012700803 1 012700804 185 30 3x75 178 1 012700805 1 011370801 4x100 209 1 012700806 1137BA/RC 5x150 250 1 012700810 L spare blade for item 1137BA 6x150 270 1 012700808 10x250 382 8x200 312 L 1272BAmm mm 1 010320820 sparkproof screwdrivers for cross head Phillips® screws200 40÷100 1036BA sparkproof external circlip pliers, straight L1 pattern, L PVC-coated handles 1137BA/RC 1 011370851 1150BA PHxDxL L1 D sparkproof combination pliers mm mm L L1 1x5x100 209 1 012720801 270 1 012720802 2x6x150 332 1 012720803 1 010360820 3x8x200 L L1 L mm mm L 1370BAmm mm 200 40 sparkproof engineer's hammers,200 40÷100 wooden shafts1046BA sparkproof slip joint pliers 1 011500820 L1 1162BA A L sparkproof extra-long flat knurled nose pliers A L L1 L g mm mm mm A L1 1 013700805 500 30 310 108 1 013700810 1000 35 340 137 L 1370BA/MR spare shafts for item 1370BA 1 013700865 L A max L L1 1 013700870 mm 1 010460801 mm mm 1 011620815 1370BA/MR 500 mm 1 010460803 1370BA/500 32 150 54 1370BA/MR 1000 250 52 1370BA/1000 300232
1375BA/PL 1380BA 1390BA/R spare nylon faces for item 1390BAsparkproof ball pein and claw hammer, sparkproof lump hammers,wooden shaft wooden shaftsL1 L1 D ØL L D 1 013750800 1 013800810 mm 4 013900885 L L1 Ø L1 L 1 013800815 g mm mm mm g mm mm 1 013800820 52 1 016020801680 321 125 30 1000 100 400 1602BA 1500 118 400 sparkproof crimping pliers 2000 126 449 for insulated terminals, lightweight series1377BA 1380BA/MR spare shafts for item 1380BA Lsparkproof ball pein hammer, round head,for coppersmiths and tinsmiths 1380BA/MR 1000 1380BA/1000L1 1380BA/MR 1500 1380BA/1500 1 013800860 1380BA/MR 2000 1 013800865 1380BA/2000 1 013800870 L L1 L 1381BA 1 013770834g mm mm sparkproof sledge hammers,340 90 280 wooden shafts1377BA/PL L mmsparkproof ball pein hammer, round head, mm²for coppersmiths and tinsmiths 200 0.75÷6 L1 1701BA sparkproof hexagon chisels L L S A L1 L L AS 1 017010810 g mm mm 1 013810850 mm mm mm 1 017010814 5000 179 900 1 013810858 1 017010815L1 8000 190 900 150 12 10 1 017010817 200 16 14 L 1381BA/MR 250 18 14 spare shaft for item 1381BA 350 19 17 L1 L 1 013770884 1381BA/MR 5000 1 013810870 1703BA/Ag mm mm 1381BA/5000 1 013810878 sparkproof axe340 90 280 1381BA/MR 8000 1381BA/8000 L11379BA 1390BAsparkproof scraping hammer, spark-proof soft face hammerwooden shaftL1 A L L L1 A mm mm mm 1 017030082 340 145 82 L L1 Ø L1 L 1 013790850g mm mm500 142 315 L Ø L L1 1 013900805 mm mm mm 52 370 130 233
1703BA/P 1719BA12sparkproof pick sparkproof files, 12\" A L PL1 L 1719BA12/P L mm 1 017190831 300 A L L1 1727BAmm mm mm 1 017030150 sparkproof hacksaw and blade56 1050 4101703BA/PLsparkproof shovelA 1728BA L1 L L1 L L L1 mm mm 1 017270801 A L1 Lmm mm mm 500 300240 420 990 1728BA 1 017030200 spark-proof blades for hacksaw frames, made1717BA from copper-beryllium alloysparkproof rigid spatulas A L 1 017280801 A Lmm mm60 30080 1737BA1717BA/1 1 017170801 brush with sparkproof wiressparkproof wall scraper 1 017170803 A L A LA mm mm 1 017370801 ALmm mm 294 29100 220 L 1776BA 1 017170805 sparkproof knife1719BA8 L1 L sparkproof files, 8\" 1 017760801 L1 L L mm mm P 145 250M 1784BAR sparkproof scissorsT Q L L L mm 1 017190801 1719BA8/P 1 017190805 mm1719BA8/M 200 1 017190810 1 0178408221719BA8/R 200 1 017190815 2251719BA8/T 200 1 0171908201719BA8/Q 200 200234
PFaadoNDutrccrIortinutoaEiloeonhlrmnosmpoUvceinn,erarpboggMcdgreirortooeraeasti1iimvrshhAnns5etiiedgttnpshToneaygaaegIspernlnsnrCysieapdyvao,rernertwitisexTseinoosrtcsauddOBafhepinmyumn.eclOodslgmtaelIneptotaeLtnrsrrasiiitScsoUisaorevvkrlftetaoeceeeomApnnotltnoinidoa-NatslrteossbiheimtnupliDiheqkiltmeniaheeuntrbnyanioaAiarca/tysawtetpsusiCincmme-ossicQhsrCntutoeeofouopoornEwwmaompfertSlilmlsistesteatihotSurymarieancknpbaODmnehecrtadnetsRhosesgstpief.aegre:eIraco.ndasEbricmwittsefSieimititsopcossht.aaenspnctnpaohttrtolra.oisuewetdTssxsruhBiteebceidresnltnseetcstapvhhwe’rwaseaolanosiscptydp,h,enbersbeBeadseueetcmfctnhooahaarkmesUtettieychstaee,ltlnooswoilleisdwww.beta-tools.com 235
1921B1 1921N3 1924Bbaby reversible air ratchet reversible ratchet compact reversible impact wrench • \"Pin Clutch\" impulse device Ø 1/4” Ø GAS 1/4” GAS 130 mm 258 mm 155 mm 150 rpm Free speed 350 rpm Free speed 68 Nm 198Max. torque 24 Nm Max. torque mmBolt capacity Cl 8.8 M1016 mmBolt capacity Cl 8.8 M711 mm Bolt capacity Cl 12.9 M813 mmAir inlet Cl 12.9 M610 mm Bolt capacityWorking pressure 1/4\" GASInternal hose size (Ø) 1/4\" GAS Air inlet 6,2 barMean air consumption 6,2 bar Working pressure 10 mmWeight 8 mm Internal hose size (Ø) 140 l/min 68 l/min Mean air consumption 1,2 kg 0,4 kg Weight ” ” kg 1 019210025 1 019210001 1/2 1,2 Ø 1/4\" GAS1/4 Ø 1/4” 10,000 rpm1921M1 Ø 1921I GAS Free speed 353 Nmcompact reversible air ratchet 1/4” impact reversible ratchet Max. torque GAS Bolt capacity Cl 8.8 M1624 mm • \"Pin Clutch\" impulse device Bolt capacity Cl 12.9 M1421 mm Air inlet Working pressure 1/4\" GAS 198 mm Internal hose size (Ø) 6,2 bar Mean air consumption 8 mm 275 mm Weight 80 l/min 1,5 kg Free speed Max. torque ” kg Bolt capacity 1 019240021 Bolt capacity 3/8 1,5 Air inletFree speed 200 rpm Working pressure 400 rpm 1924CDMax. torque 27 Nm Internal hose size (Ø) 101 Nm reversible impact wrench, Mean air consumption made from composite materialBolt capacity Cl 8.8 M711 mm Weight Cl 8.8 M1016 mmBolt capacity Cl 12.9 M610 mm Cl 12.9 M813 mm • Double hammer impulse device Air inlet 1/4\" GAS ” kg 1/4\" GASWorking pressure 6,2 bar 6,2 bar 1/2 1,3Internal hose size (Ø) 8 mm 10 mmMean air consumption 96 l/min 235 l/minWeight 0,6 kg 1,3 kg 167 mm ” kg 1 019210005 1 019210035 1/4 0,61921M2 167compact reversible air ratchet mm Ø 1/4” GAS 198 mm Ø 1/4” GASFree speed 200 rpm Free speedMax. torque 27 Nm Max. torque 10,000 rpm 410 NmBolt capacity Cl 8.8 M711 mm Bolt capacityBolt capacity Cl 12.9 M610 mm Bolt capacity Cl 8.8 M1624 mm Cl 12.9 M1421 mmAir inlet 1/4\" GAS Air inletWorking pressure 6,2 bar Working pressure 1/4\" GAS 6,2 barInternal hose size (Ø) 8 mm Internal hose size (Ø) 8 mmMean air consumption 96 l/min Mean air consumption 79 l/min 1,3 kgWeight 0,6 kg Weight ” kg 1 019210015 ” kg 1 019240007 3/8 0,6 3/8 1,3236
1927CD 1927XM 1927ANreversible impact wrench, compact reversible impact wrench Angle reversible impact wrenchmade from composite material • Single hammer impulse device • Single hammer impulse device• Double hammer impulse device Ø 1/4” 72 GAS mm 191 mm 109 mm 350 mm 188 186 mm Max. torque 244 Nm mm Bolt capacity 244 Nm Bolt capacity Cl 8.8 M1421 mm Ø 1/4” GAS Ø 1/4\" GAS Air inlet Cl 12.9 M1219 mm Operating pressure 1/4\" GAS 7,000 rpm 10,000 rpm Internal hose size (Ø) 6,2 bar 1.020 Nm 770 Nm Mean air consumption 10 mm Cl 8.8 M2234 mm Weight Cl 12.9 M1827 mm Cl 8.8 M2234 mm Peso 2.1 kg 1/4\" GAS Cl 12.9 M1827 mm 2,1 kg 6,2 bar 1/4\" GAS ” kg 10 mm 6,2 bar 1 019270012 130 l/min 10 mm 1/2 2,1 1,9 kgFree speed Free speed 122 l/min 1927SP-AMMax. torque Max. torque 1.3 kg magnetic support for pneumatic impact wrenchBolt capacity Bolt capacity • Fitted with two high-powered magnets with protective rubberBolt capacity Bolt capacity tops • Can accommodate 1 1/2\" impact wrench, 4 sockets and 1Air inlet Air inlet torque wrenchWorking pressure Operating pressure • Capacity: 10 kgInternal hose size (Ø) Internal hose size (Ø)Mean air consumption Mean air consumptionWeight Weight ” kg 1 019270007 ” kg 1 0192700301/2 1,9 1/2 1,31927P 1927Areversible impact wrench, made from reversible impact wrenchcomposite material • \"Pin Clutch\" impulse device• Double hammer impulse device 191 mm 199 mm g 1 019270000 186 400 mm 205 mmFree speed Ø 1/4” GAS Free speed Ø 1/4” GASMax. torque Max. torqueBolt capacity 7,500 rpm 7,000 rpmBolt capacity 1.750 Nm Bolt capacity 610 NmAir inlet Cl 8.8 M2436 mm Bolt capacityOperating pressure Cl 12.9 M2030 mm Cl 8.8 M2234 mmInternal hose size (Ø) 1/4\" GAS Air inlet Cl 12.9 M1827 mmMean air consumption Operating pressureWeight 6,2 bar 1/4\" GAS 10 mm Internal hose size (Ø) 6,2 bar 290 l/min Mean air consumption 10 mm ” kg 2 kg Weight 160 l/min1/2 2,0 2.7 kg 1 019270008 ” kg 1 019270002 1/2 2,7 237
1928CD 1928DAL 1930CDreversible impact wrench, reversible impact wrench reversible impact wrench,made from composite material made from composite material • Double hammer impulse device• Double hammer impulse device • Double hammer impulse device 235 mm 250 mm 346 mm 212 mm 210 6\" (153 mm) 260 mm mm Ø 3/8” GAS Ø 3/8” GASFree speed 4.500 rpm Free speed 5,000 rpm Free speed Ø 1/2” GASMax. torque 1.800 Nm Max. torque 1.695 Nm Max. torque 4,000 rpmBolt capacity Cl 8.8 M2741 mm Bolt capacity Cl 8.8 M2741 mm Bolt capacity 2.445 NmBolt capacity Cl 12.9 M2436 mm Bolt capacity Cl 12.9 M2436 mm Bolt capacity Cl 8.8 M3655 mm Cl 12.9 M3046 mmAir inlet 3/8\" GAS Air inlet 3/8\" GAS Air inlet 1/2\" GASWorking pressure 6,2 bar Working pressure 6,2 bar Working pressure 6,2 barInternal hose size (Ø) 10 mm Internal hose size (Ø) 10 mm Internal hose size (Ø) 13 mmMean air consumption 215 l/min Mean air consumption 240 l/min Mean air consumption 320 l/min 7,1 kgWeight 3,5 kg Weight 4,8 kg Weight ” kg 1 019280007 ” kg 1 019280023 ” kg 1 0193000223/4 3,5 3/4 4,8 1 7,11928DA 1928K4 1930NCDreversible impact wrench assortment of one reversible impact wrench reversible impact wrench, and four impact sockets, long series made from composite material• Double hammer impulse device • \"Pin Clutch\" impulse device • Double hammer impulse device 217 mm 538 mm 212 181 mm 7\" (178 mm) mm Ø 1/2” GAS Free speed Ø 3/8” GAS 728L 27-30-32-36 mm 4,000 rpm Free speed 4,000 rpm Max. torque 1.493 Nm Max. torque 2.445 Nm Bolt capacity 5,000 rpm Free speed Cl 8.8 M2741 mm Bolt capacity Cl 8.8 M3655 mm Bolt capacity 1.695 Nm Max. torque Cl 12.9 M2436 mm Bolt capacity Cl 12.9 M3046 mm Air inlet Cl 8.8 M2741 mm Bolt capacity 3/8\" GAS Air inlet 1/2\" GAS Working pressure Cl 12.9 M2436 mm Bolt capacity Working pressure Internal hose size (Ø) 3/8\" GAS Air inlet 6,2 bar Internal hose size (Ø) 6,2 bar Mean air consumption Working pressure 10 mm Mean air consumption 13 mm Weight 6,2 bar Internal hose size (Ø) 260 l/min Weight 320 l/min 10 mm Mean air consumption 5,2 kg 8,8 kg 240 l/min Impact wrench weight ” kg 4,3 kg ” kg 1 019280104 1 019300027 3/4 4,3 ” kg 1 8,8 1 019280022238 3/4 9,3 410x330x106 mm
1930PA 1930A 1930ZLreversible impact wrench reversible impact wrench reversible impact wrench• Double hammer impulse device • Double hammer impulse device • Double hammer impulse device 380 mm 300 mm 270 198 475 mm mm mm 180 Ø 1/2” GAS mm Ø 1/2” GAS Ø 1/2” GASFree speed 3,500 rpm Free speed 4,000 rpm Free speed 3,000 rpmMax. torque 2.445 Nm Max. torque 2.445 Nm Max. torque 4.068 NmBolt capacity Cl 8.8 M3655 mm Bolt capacity Cl 8.8 M3655 mm Bolt capacity Cl 8.8 M4265 mmBolt capacity Cl 12.9 M3046 mm Bolt capacity Cl 12.9 M3046 mm Bolt capacity Cl 12.9 M3655 mmAir inlet 1/2\" GAS Air inlet 1/2\" GAS Air inlet 1/2\" GASOperating pressure 6,2 bar Working pressure 6,2 bar Working pressure 6,2 barInternal hose size (Ø) 13 mm Internal hose size (Ø) 13 mm Internal hose size (Ø) 13 mmMean air consumption 350 l/min Mean air consumption 460 l/min Mean air consumption 480 l/minWeight 9.6 kg Weight 9.5 kg Weight 15 kg ” kg 1 019300032 ” kg 1 019300036 kg 1 019300070 ”1 9,6 1 9,5 15 1 1/21930LA 1930HLA 1931CD6reversible impact wrench reversible impact wrench reversible drill,• Double hammer impulse device • Double hammer impulse device made from composite material 153 mm 536 mm 628 mm 180 mm 8\" (203 mm) 198 9\" (230 mm) Ø 1/2” GAS 137 mm mm Ø 1/2” GAS Ø 1/4” GASFree speed 4,000 rpm Free speed 3,000 rpm Free speedMax. torque 2.445 Nm Max. torque 3.661 Nm Chuck capacity 2,600 rpmBolt capacity 1÷6 mmBolt capacity Cl 8.8 M3655 mm Bolt capacity Cl 8.8 M4265 mm Power 0,23 kWAir inlet Cl 12.9 M3046 mm Bolt capacity Cl 12.9 M3350 mm Spindle threadWorking pressure 3/8” - 24UNFInternal hose size (Ø) 1/2\" GAS Air inlet 1/2\" GAS Air inlet 1/4\" GASMean air consumption 6,2 bar Working pressure 6,2 bar Working pressure 6,2 barWeight 8 mm 13 mm Internal hose size (Ø) 13 mm Internal hose size (Ø) 130 l/min 460 l/min Mean air consumption 460 l/min Mean air consumption 0,6 kg ” kg 10,6 kg Weight 16,4 kg Weight 1 10,6 1 019310006 1 019300037 ” kg 1 019300040 239 kg 1 16,4 0,6
1931CD10 1931AN10 1932RS13 reversible angle drill reversible drillreversible drill,made from composite material 182 mm 223 mm 212 mm Ø 1/4” 145 GAS 140 mm mm 97 mmFree speed Ø 1/4” Free speed 1,400 rpm Free speed Ø 1/4” GASChuck capacity GAS Chuck capacity 1÷10 mm Chuck capacity 750 rpmPower 1,800 rpm Power 0,38 kW Power 1,5÷13 mmSpindle thread 1÷10 mm Spindle thread 3/8” - 24UNF Spindle thread 0,38 kW 0,23 kWAir inlet 3/8” - 24UNF Air inlet 1/4\" GAS Air inlet 3/8\" - 24UNFWorking pressure 1/4\" GAS Working pressure 6,2 bar Working pressure 1/4\" GASInternal hose size (Ø) 6,2 bar Internal hose size (Ø) 10 mm Internal hose size (Ø) 6,2 barMean air consumption 10 mm Mean air consumption 150 l/min Mean air consumption 10 mm 170 l/minWeight Weight 1,1 kg Weight 160 l/min 1 kg 1,4 kg 1 019320043kg 1 019310010 kg 1 019310030 kg1,0 1,1 1,41931CD13 1932B10 1932B13 reversible drill reversible drillreversible drill,made from composite material 190 mm 220 mm 226 mm 145 140 150 mm mm mm Ø 1/4” GAS Ø 1/4” GAS Ø 1/4” GAS Free speed 800 rpm Free speed 1,800 rpm Free speed 400 rpm Chuck capacity 1,5÷13 mm Chuck capacity 1÷10 mm Chuck capacity 1,5÷13 mm Power Spindle thread 0,38 kW Power 0,23 kW Power 0,34 kW Air inlet 1/2” - 20UNC Spindle thread 3/8” - 24UNF Spindle thread 1/2\" - 20UNC Working pressure Internal hose size (Ø) 1/4\" GAS Air inlet 1/4\" GAS Air inlet 1/4\" GAS Mean air consumption 6,2 bar Working pressure 6,2 bar Operating pressure 6,2 bar Weight 10 mm 10 mm Internal hose size (Ø) 10 mm Internal hose size (Ø) 170 l/min Mean air consumption 160 l/min Mean air consumption 180 l/min kg 1,3 kg 1,6 kg Weight 1,2 kg Peso 1,3 1 019320004240 1 019310013 1 019320040 kg kg 1,2 1,6
1933 1933IL 1934MAVdie grinder long spindle die grinder micro die grinder• Collect chuck, Ø 3 mm and 6 mm Ø 38,5 • Collect chuck, Ø 3 mm and 6 mm Ø 45,1 1/4” mm 1/4” mm GAS GAS 159 mm 195 mm Free speed 340 mmChuck capacityPower 25,000 rpm Free speed 20,000 rpmAir inlet 3 - 6 mm Chuck capacity 3 - 6 mmWorking pressure 0,38 kWInternal hose size (Ø) 0,20 kW Power 1/4\" GASMean air consumption 1/4\" GAS Air inlet 6,2 barWeight 10 mm 6,2 bar Working pressure 113 l/min 10 mm Internal hose size (Ø) 1,4 kg g 230 l/min Mean air consumption 380 380 g Weight 1 0193300101933I G1Ø/A4S” 3m8m,5 150 mm 14 mmdie grinder 1 019330001 kg Free speed 56,000 rpm• Collect chuck, Ø 3 mm and 6 mm Chuck capacity 3 mm 1,4 Power Air inlet 0,04 kW Ø 45,1 1933AN90 Operating pressure 1/4\" GAS 182 mm 1/4” mm angle grinder Internal hose size (Ø) GAS Mean air consumption 6,2 barFree speed • Collect chuck, Ø 3 mm and 6 mm Weight 4,5 mmChuck capacity 115 l/minPower Air inlet g 0.2 kgWorking pressure 72,25Internal hose size (Ø) mm 205 Mean air consumption 1 019340010Weight 20,000 rpm 163 mm 20,000 rpm 1934MAV70 3 - 6 mm 3 - 6 mm high-speed micro die grinder g Free speed 0,20 kW 0,38 kW Chuck capacity 1/4\" GAS670 1/4\" GAS Power 6,2 bar Air inlet 10 mm1933L 6,2 bar Working pressure 230 l/minlong spindle die grinder 10 mm Internal hose size (Ø) 510 g Mean air consumption• Collect chuck, Ø 3 mm and 6 mm 260 l/min Weight 670 g 1 019330020 150 mm 117 mm 1 019330005 g 17 mm 255 mm 510Free speedChuck capacity 1934BVPower low-speed tyre bufferAir inletWorking pressure • Collect chuck, Ø 3 mm and 6 mmInternal hose size (Ø)Mean air consumption Weight Ø 38,3 Ø 45 1/4” mm 1/4\" mm g GAS GAS670 211 mm 25,000 rpm Free speed 3,700 rpm Free speed 70,000 rpm 3 - 6 mm Chuck capacity 3 - 6 mm Chuck capacity 3 mm 0,20 kW Power 0,37 kW Power 0,08 kW 1/4\" GAS Air inlet 1/4\" GAS Air inlet 1/4\" GAS 6,2 bar Operating pressure 6,2 bar Operating pressure 6,2 bar 10 mm Internal hose size (Ø) 10 mm Internal hose size (Ø) 4,5 mm 115 l/min 270 l/min Mean air consumption 113 l/min Mean air consumption 0.21 kg 670 g Weight 0.84 kg Weight 1 019340030 1 019330015 1 019340000 g g 241 840 210
1935F 1936/5A 1936/7reversible air screwdriver angle grinder angle grinder Ø125 317 mm 206 mm 95 238 mm Ø178 Ø 3/8” mm GAS Ø 1/4” GAS 105 mm4-16 Nm 135 mmFree speed Free speed 10,000 rpm Free speed 7,000 rpmTorque range Ø 1/4” GAS Grinding disc size 125 mm Grinding disc size 178 mmScrew capacity Power Power 1,4 kWBit holder 800 rpm Spindle thread 0,66 kW Spindle thread M14Air inlet 4-16 Nm Air inlet M14 Air inletWorking pressure Working pressure Working pressure 3/8\" GASInternal hose size (Ø) 6-9 M Ø internal hose size 1/4\" GAS Ø internal hose size 6,2 barMean air consumption 1/4” Mean air consumption 6,2 bar Mean air consumption 13 mmWeight 1/4\" GAS Weight Weight 6,2 bar 10 mm 500 l/min 10 mm 390 l/min 3,6 kg kg 150 l/min kg kg 1,3 kg 1,9 kg 1,3 1,9 3,6 1 0193600071936/4A 1937angle grinder 1 019360025 Roto-orbital palm sander, lubrication free, made from composite material • Orbit diameter: 5 mm 1936/5 230 mm 1 019350045 angle grinder Ø 1/4” Ø125 GAS 260 mm Ø 1/4” 100 mm GAS 95 mm Ø115 238 mm Ø 1/4” Free speed 12,000 rpm 95 GAS Power 0,18 kW mm Pad size 150 mm Free speed 10,500 rpm Orbit diameter 5 mmFree speed 11,000 rpm Grinding disc size 125 mm Spindle thread 5/16\"-24Grinding disc size 115 mm Power 0,7 kW Air inlet 1/4\" GAS Spindle thread M14 Operating pressure 6,2 barPower 0,66 kW Air inlet Internal hose size (Ø) 10 mmSpindle thread M14 Working pressure 1/4\" GAS Mean air consumption Ø internal hose size 6,2 bar Weight 170 l/minAir inlet 1/4\" GAS Mean air consumption 10 mm 0,86 kgOperating pressure 6,2 bar Weight 380 l/min kg Internal hose size (Ø) 10 mm 2 kg 1 019370001Mean air consumption 390 l/min kg 0,86 Weight 1.77 kg 2,0 1 019360005 1937R/P 6-hole pad, Ø 150 mm, for item 1937 1937R/P kg 1 019360024 1 019370002 1,8242
1937KC 1937RTmini roto-orbital sander orbital palm sander, made from composite material, with suction system• Orbit diameter 4 mm• 2 sanding pads (Ø 50 mm and Ø 75 mm) • Orbit diameter 5 mm• 10 abrasive paper discs (Ø 50 mm), grain 400, 600, 800 • Rectangular pad (100x110 mm)• 10 abrasive paper discs (Ø 75 mm), grain 400, 600, 800 • Delta pad (125x95 mm) 170 mm (▲ 195 mm) 1937KL Ø 1/4” mini polisher GAS • Sanding pad (Ø 75 mm) 100 • 2 polishing sponges (Ø 90 mm) - 1937/KL-DSB, 1937/KL-DSG mm • Lambswool pad (Ø 90 mm) - 1937/KL-DLA Free speed 15000 Free speed 10,000 rpmPower 0.25 Orbit diameter 5 mmPad sizeSpindle thread 50 - 75 Air inlet 1/4\" GASAir inlet M6 x 1.0 Operating pressure 6.2 barOperating pressureInternal hose size (Ø) 1/4\" Internal hose size (Ø) 10 mmMean air consumption 6.2 bar Mean air consumption 180 l/minPolisher weightKit weight 10 Weight 0.9 kg 79 Peso 0,9 kg 0.64 kg 1.4 Free speed 3,200 rpm Power 0.25 kW 1 0193700211,4 Pad size 75 mm kg 1 019370171 Spindle thread M6 Air inlet 0,9 Operating pressure 1/4\" GAS1937C... Internal hose size (Ø) 6.2 bar 1937RT/RAbrasive paper discs for item 1937KC Mean air consumption 10 mm rectangular pad for item 1937RT Polisher weight 91 l/minØ Kit weight 0.75 kg 1.8 kg L kg 1 019370161 1,8 Ø 1937KL-D L1 mm P 1 019370175 accessories for item 1937KL 1 019370022 1 019370176 L L150 400 1 019370177 1937KL-DLA mm mm L50 600 1 019370178 Ø 50 800 1 019370179 1937RT/R 110 10075 400 1 019370180 1937KL-DSB 1 01937002375 600 1937RT/T75 800 1937KL-DSG Delta pad for item 1937RT* Prices refer to 10 pieces 1937KL-DLA Ø 1937KL-DSB mm 1 019370164 1937KL-DSG 1 019370165 90 1 019370166 90 90 L1 1937K... L L1 Pads for items 1937KC and 1937KL mm mm 1937RT/T 125 95 Ø Ø mm 1937KC 1937KL 1 019370173 1 019370163 1937KC-RP 50 ● 1937KL-RP 75 ● ● 243
1937M 1937N10 1937N20-GRmulti-use sander pneumatic belt sander sand belts for item 1937N20with 16 accessories 1937N20-GR60 P 1937N20-GR80 1 019370156 150 mm 1937N20-GR100 60 1 019370158Free speed 1937N20-GR120 80 1 019370160Power 100 1 019370162Air inlet 120Working pressureInternal hose size (Ø) The prices shown are for 10 piecesMean air consumptionSander weight Ø 1/4 GASKit weight 3,500 rpm Ø 1/4” GAS 20,000 rpm 1938 80 0,34 kW 0,37 kW Windscreen remover mm kg Free speed 1/4\" GAS Power 10x330 mm • Supplied with 1 57 mm straight blade4,5 6,2 bar Belt size 1/4\" GAS 458x495x116 mm 10 mm Air inlet 185 mm Working pressure 6,2 bar1937M-01÷11 113 l/min Internal hose size (Ø) 10 mm Øaccessories for item 1937M 1,5 kg Mean air consumption 1/4\" 4,5 kg Weight 374 l/min GAS 0,9 kg 1 019370011 kg 1 019370041 0,9 Oscillations/minute 20,000 1937N10-GR Air inlet 1/4\" GAS sand belts for item 1937N10 Operating pressure Internal hose size (Ø) 6,2 bar Mean air consumption 6,5 mm Weight 200 l/min 1,0 kg kg 1,0 1 019380021 1938R/L blades for windscreen removers 1937N10-GR60 P 1937N10-GR80 1 019370146 1937N10-GR100 60 1 019370148 1937N10-GR120 80 1 019370150 100 1 019370152 120 The prices shown are for 10 pieces 1937N20 R/L1 R/L2 pneumatic belt sander L L R/L3 R/L4 L R/L5 L L 160 mm L Free speed Ø 1/4” GAS 1938R/L1 L mm 1937M- 1 019370101 Power 1938R/L2 mm 1 019380041 1 019370102 Belt size 16,000 rpm 1938R/L3 1 019380042 1937M-01 30 1 019370103 Air inlet 0,45 kW 1938R/L4 57 1 019380043 1937M-02 30 1 019370104 Working pressure 1938R/L5 90 1 019380044 1937M-03 11 1 019370105 Internal hose size (Ø) 20x520 mm 50 1 019380045 1937M-04 23 1 019370106 Mean air consumption 1/4\" GAS 16 1937M-05 11 1 019370107 Weight 6,2 bar 36 1937M-06 23 1 019370108 10 mm 1 019380055* 1937M-07 16 1 019370109 400 l/min 1938R/S5 1937M-08 13 07 1 019370110 kg 1,6 kg set of 5 blades for item 1938 1937M-09 26 07 1 019370111 1937M-10 11 03, 05 1,6 1938R/S5 1937M-11 23 01, 02, 1 019370051 04, 06 * The prices shown are for 6 pieces244
1940 216 mm 1940E10 1942Aair hammer air hammer air saw • Compatible with chisels with 10-mm hexagon drive 266 mm 180 mm 148 48 175 mm mm mm Ø 1/4 GAS L=225 mm Ø 1/4 GAS 10.000 10 mmStrokes per minute 3,500 Strokes per minute 2.900 Strokes per minute 1/4\" GASChisel inlet 11 mm Chisel inlet 10 mm Stroke length 6,2 barPiston size Piston size Air inlet 8 mmPiston stroke 19 mm Piston stroke 19 mm Operating pressure 75 l/minAir inlet 67 mm Air inlet 67 mm Internal hose size (Ø) 550 gWorking pressure 1/4\" GAS Operating pressure 1/4\" GAS Mean air consumptionØ internal hose size 6,2 bar Internal hose size (Ø) 6,2 bar Weight Mean air consumption 8 mm Mean air consumption 10 mm 1 019420000Weight 240 l/min Weight 76 l/min 1,9 kg 1.7 kg g kg kg 550 1 019400001 1 0194000101,9 1,7 1942LR Bimetal blades1940MT 1940E10/MT for air saw 1942Aspare retainer spring for item 1940 spare retainer spring for item 1940E101940MT 1940E10/MT 90 mm 5 019400110 5 019400112 n. 32x1”1940S...chisels for air hammers 1940E10/S...item 1940 11 mm chisels for air hammers 1940E10 175 mm 175 mm 1942LR SN SN 5 019420032 ST 1944 SD 10 mm needle scaler 313 mm SPS ST SDT SD 46 SPS mm SDT1940SN 1940E10/SN Ø 1/4”1940ST 5 019400020 1940E10/ST 5 019400040 GAS1940SD 5 019400021 1940E10/SD 5 0194000411940SPS 5 019400022 1940E10/SPS 5 019400042 3,0001940SDT 5 019400023 1940E10/SDT 5 019400043 33 mm 5 019400024 5 019400044 1940E10/S5 191940/S5 set of 5 chisels Strokes per minute 3 mm for air hammers 1940E10 Stroke length 1/4\" GASset of 5 chisels for air hammers N°. of needles 6,2 baritem 1940 Needle size (Ø) 8 mm Air inlet 140 l/min1940/S5 1940E10/S5 Working pressure 2,6 kg 1 019400030 1 019400050 Internal hose size (Ø) Mean air consumption Weight 1 019440001 245 kg 2,6
1944AR 1946C7,8 1946KF/M... riveter spare pins for item 1946KFset of 19 needles for needle scaleritem 1944 • Automatic suction • Supplied assembled for use with 4.8 - 5.6 - 6.4 - 7.8 mm long steel, stainless steel, aluminium and copper rivets 305 mm1944AR 290 1 019440005 mm1946 Ø 1/4” 16,900 N 1946KF/M4 air riveter GAS 22.5 mm 1946KF/M5 1 019460124 Stainless steel Ø 7.8 mm 1946KF/M6 1 019460125• Supplied with interchangeable nozzles, Traction power 1/4\" GAS 1946KF/M8 1 019460126 Stroke length 1 0194601282.4-3.2-4.0-4.8 mm long Maximum rivet capacity 6,2 bar 1947 228 mm Air inlet 10 mm bonding gun 275 mm Operating pressure 4.9 l/cycle 270 Internal hose size (Ø) 1.8 kg mm Air consumption Weight 60 1 019460008 mm kg 1,8 Ø 1/4” 8000 N 1946KF Ø 1/4” GAS 14 mm air riveter for threaded inserts GAS Ø aluminium 4,8 mmTraction power 6,2 bars • Supplied assembled for threaded rivets made of steel, 50x210 mmStroke length 6,2 bar stainless steel, aluminium and copper, M4, M5, M6, M8 350 mlMaximum rivet capacity 6 mmWorking pressure 1,2 l/cycles 260 mm 1/4\" GASAir inlet 1,5 kg 4,8 barInternal hose size (Ø) 270 Tube size 10 mmMean air consumption mm Cartridge capacityWeight 1 019460001 Air inlet 120 l/min Ø 1/4” Working pressure 1,1 kg GAS Internal hose size (Ø) kg Mean air consumption Traction power Weight 1 0194700011,5 Stroke length Maximum rivet capacity 1946C4,8 Air inlet 14,235 N kg 268 mmriveter Operating pressure 7 mm Internal hose size (Ø) 1,1• Automatic suction Air consumption Stainless steel Ø, M8• Supplied assembled for use with 2.4 - 3.2 - 4.0 - 4.8 mm long Air riveter weight 1/4\" GAS 1947Hsteel, stainless steel, aluminium and copper rivets Kit weight bonding gun 6,2 bar 290 mm 10 mm 61 2.1 l/cycle mm 2.1 kg 3.4 kg 245 mm Ø 1/4” GAS 1 019460012 kg Traction power Tube size Stroke length 3,4 Cartridge capacity Maximum rivet capacity Air inlet Air inlet 8,900 N Operating pressure Ø 1/4”GAS Operating pressure 15 mm Internal hose size (Ø) Internal hose size (Ø) Mean air consumption 210x50 mm Air consumption Stainless steel Ø 4.8 mm Weight 300/310 ml Weight 1/4\" GAS 1/4\" GAS 6,2 bar g 4 ÷ 8 bar kg 10 mm 750 2,5 mm 1,5 2.6 l/cycle 120 l/min 1.5 kg246 750 g 1 019460006 1 019470011
1947G 1949BC 1949Fgrease gun progressive blow gun with rubber nozzle progressive blow gunDie-cast aluminium head • Hard-wearing, shockproof composite material body • Made from hard-wearing, shockproof, scratchproof,Ergonomic grip for ease of access to tough greasing points • Replaceable scratchproof rubber nozzle thermally insulated composite plastic materialCorrosion-resistant brass valve • The special valve and the lever allow the circuit to beTakes 400 g cartridges or bulk grease up to 500 cc 30 mm progressively opened, thus optimizing air flowTube size: 54 (interior) x 260 mm 120 mmAir inlet: 1/4\" GASOperating pressure: 4÷10 bar 160Weight:1.9 kg mm 172 mm 125 mm 100 mm Ø 1/4\" GAS Ø 1/4\" GAS 260 1/4\" Aluminium threaded insert 1/4\" GAS Brass threaded insert 1/4\" GAS mm GAS Operating pressure 6-8 bar Operating pressure 6-8 bar 54 mm Maximum operating pressure 15 bar Maximum operating pressure 10 bar1947G Mean air consumption 87 l/min Operating temperature Operating temperature Weight -15°C ÷ 70°C1948 1 019470051 Weight -20°C ÷ 70°C 130 gengraving pen 120 g L=1,5 m g g 5 019490027 1 019490022 130 Ø 1/4” 120 GAS 1949BC/RU 1949G 5 rubber nozzles for item 1949BC progressive blow gun with air regulator 1949BC/RU 1 019490122 • Made from hard-wearing, shockproof, scratchproof, thermally insulated composite plastic material • The special valve and the lever allow the circuit to be progressively opened, thus optimizing air flow 1949T 125 mm telescopic progressive blow gun • Hard-wearing, shockproof composite material body • Telescopic steel swivel tube: 165 mm ÷ 300 mm 104 120 mm mm 170 mm 100mm Brass threaded insert Ø 1/4” GAS 14 Operating pressure 1/4\" GAS mm 165÷300 mm 150 Maximum operating pressure 6-8 bar mm Operating temperature 10 barMaximum hardness 60 HRC WeightAir inlet 60 HRC Aluminium threaded insert Ø 1/4\" - 15 °C ÷ 70 °COperating pressure 1/4\" GAS Operating pressure GAS 140 gMean air consumption 6,2 bar gWeight 50 l/min Maximum operating pressure 1/4\" GAS Peso Mean air consumption 6÷8 bar 140 5 019490035 150 g 15 bar Operating temperature 144 l/min 247 g Weight 1 019480001 -20°C ÷ 70°C150 190 g1948PR spare tungsten carbide bit 1 019480005 1 019490040for item 1948 g• Maximum hardness: 60 HRC 1901948PR
1949DGT 1949M 1901T/10digital tyre inflator tyre pressure tester automatic hose reel, shock-proof plastic body,• Operating pressure: 0÷11 bar L=350mm for compressed air or cold water(2.0÷160 psi)• 4 units of measurement: psi/bar/kgcm2/kpa • Max. operating pressure: 15 bar• Backlit LCD display• Reset feature 445 mm• Self-power off after 3 min.• Pressure release button L• Resolution: 0.05 bar• ABS housing, protective rubber shell 160on gauge, shockproof, nonslip handle grip mm• Power supply: 2 AAA size 1.5V batteries• Compatible with coupling 1916G 1/4\" D L=530 mm D1 60 mm Ø 3/8\"GAS D1xD L Ø GAS 1 019010210 mm m BSP 10x14 15+1 3/8\" 230 mm 1910/8 - 1910/10 bar psi g 1 019490400 automatic hose reel, aluminium body, 1949M 0÷4 5÷60 280 for compressed air or cold water Ø 1/4\" GAS 1951 • Max. operating pressure: 15 bar bar g cleaning gun A1949DGT 0-11 500 1 019490020 • For cleaning car upholstery, carpeting, seats and boots B1949GPEtyre inflator 319 mm L• Operating pressure: 0÷11 bars (10÷160 psi) 125 D• Pressure release feature mm D1• Pressure measurement feature• Gauge coated with schockproof rubber Ø 1/4” GAS D1xD L A B ØGAS• 360 degree hose rotation mm m mm mm mm L=300mm 8x12 9+1 375 130 1/4\" 1910/8 1 019100008 145 mm Free speed 3,600 rpm D1xD L A B ØGAS Tank capacity 1L mm m mm mm mm Air inlet 1/4\" GAS Working pressure 6,2 bar 10x14 15+1 490 160 3/8\" Ø 1/4\" GAS Internal hose size (Ø) 8 mm 1910/10 Mean air consumption 110 l/min 1 019100010 bar 1 019490008 Weight 650 g g 19141949GPE 0÷11 640 polyurethane recoil hoses, 98 Shore,1949GPN extendabletyre inflator, 1 019510051ABS housing g• CE certified pressure gauge with scale 0.7÷12 bars 650(graduation: 1/10 bars)• Two servo-controlled buttons allow accurate, quick tyre 1901BM/8 D Øinflating (+) and deflating (-) automatic hose reel D1 • Supplied with a calibration certificate shock-proof plastic body• Fitted with a shockproof, protective shell and an eyelet for compressed air or cold water 1 019140054• Fitted with a 1/4\" GAS threaded coupler 1 019140056• Swivel air inlet for rubber hose, Ø 7 mm • Max. operating pressure: 12 bar 1 019140060 370 mm L D1xD Ø GAS L 305 m mm BSP mm 4 5x8 1/4\" 245 6 5x8 1/4\" mm 10 5x8 1/4\" D L=1500 mm Ø D1 Ø 1/4\" GAS 4 mm D1xD L Ø GAS bar g mm m BSP 1 019010111 1 019490011 1949GPN 0,7÷12 810 8x12 9+1 1/4\"248
1915B 1915E 1917F universal ball quick couplers,polyurethane recoil hoses, 95 Shore, braided polyurethane hose, shockproof rubber,extendable up to 9 m 95 Shore, 12 metres long female threaded, cylindrical (BSP) D D • Designed for couplings 1916I and 1916GØ D1 Ø D1 D1xD Ø GAS D1xD Ø Ø GAS mm BSP 1 019150019 5 019170005 mm Ø GAS 1 019150020 BSP 5 0191700106,5x10 1/4\" BSP 1/4\" 8x12 1/4\"8x12 3/8\" 1/4\" 11x16 3/8\" 3/8\"11x16 1915E/XL 1917RS 1 019150011 braided polyurethane coils, 95 Shore, rotary universal coupler 1 019150012 50 m long 1 019150013 • Made of orange anodized aluminium D female threaded, GAS cylindrical (BSP)1915C male threaded, GAS conical (BSPT) • Matches all joints with Italian and European profilespolyurethane recoil hoses, 95 Shore,extendable up to 12 m D1 D D1xD Ø GAS Ø 1/4\" GASØ BSP 1 019150519 mm 1 019150520 D1 1/4\" 8x12 3/8\" Ø 1/4\" GAS 11x16 D1xD Ø GAS 1916I Ø GAS Ø GAS mm BSP 1 019150014 BSPT g 1 019170250 1 019150015 quick couplings Italian profile BSP6,5x10 1/4\" 1 019150016 male threaded, cylindrical (BSP) 1/4\" 57 Ø 1/4” 1/4\" 1/4\" GAS8x12 3/8\" BSPT11x161915C/L Øpolyurethane recoil hoses, 95 Shore, Ø GAS 1919FE1/4extendable up to 15 m 5 019160001 filter-regulator-lubricator BSP 5 019160002 88 mm 1/4\" Ø 1/4” 3/8\" GAS BSPT D 1916GØ D1 150 quick couplings European profile mm male threaded, tapered (BSPT) Ø D1xD Ø GAS Ø GAS BSP 1 019150115 BSPT 5 019160005 mm 1 019150116 5 019160010 1/4\" 1/4\" 5 0191600128x12 3/8\" 3/8\"11x16 1/2\" Air in/outlet 1/4” GAS BSPT1915D 1917M Pressure gauge inlet 1/8” GAS BSPT universal ball quick couplers, Maximum air capacitybraided polyurethane hose, shockproof rubber, Maximum pressure 750 l/min95 Shore, 9 metres long male threaded, cylindrical (BSP) Operating pressure 9,5 bar Operating temperature D • Designed for couplings 1916I and 1916G Filter capacity 0,5 - 8,5 bar D1 Cup capacity 5 - 60 °C Weight 5 micron 15 cc air / 25 cc oil g 700 g 700 1 019190200 Ø 249 Ø D1xD Ø GAS Ø GAS BSP 1 019150017 BSP 5 019170001 mm 1 019150018 5 019170003 1/4\" 1/4\" 5 0191700048x12 3/8\" 3/8\"11x16 1/2\"
1919RB-FE1/4 1919F3/8 1919RF-Fset of spare cups for item 1919FE1/4 filter-regulator-lubricator spare filter for filters 150 mm item 1919F - 1/4”, 3/8” and 1/2”1919RB-FE1/4 Ø 3/8” Ø 3/8” 1919RF-F 1 019190210 GAS GAS 1 019190530 BSPT BSPT 220 3/8” GAS BSPT mm 1350 l/min 9,5 bar1919RF-FE1/4 1919RM-Fspare filter for item 1919FE1/4 0,5 - 8,5 bar 5 - 60 °C spare pressure gauge for filters 5 microns item 1919F - 1/4”, 3/8” and 1/2”1919RF-FE1/4 Air in/outlet 60 cc air / 90 cc oil 1 019190230 Maximum air capacity 1.3 kg1919RM-FE1/4spare pressure gauge Maximum pressurefor item 1919FE1/4 Operating pressure Operating temperature Filter capacity Cup capacity Weight 1919RM-F kg 1 019190350 1 019190520 1919ML 1,3 mini lubricators Ø 1/8” Ø GAS BSPT 1919F1/2 filter-regulator-lubricator L 150 mm1919RM-FE Ø 1/2” 1 019190220 GAS1919F1/4 BSPTfilter-regulator-lubricator Ø 1/2” LØ 220 GAS Ø mm mm 1 019190030 mm BSPT 1 019190032 1/4\" 63 36 3/8\" 63 36 1 019190035 150 mm 1919SC mini water separator Ø 1/4” Ø 1/4” Air in/outlet 1/2” GAS BSPT GAS GAS Maximum air capacity 2500 l/min L BSPT BSPT Ø Maximum pressure 9,5 bar 220 Operating pressure 0,5 - 8,5 bar LØ mm Ø mm mm Operating temperature 5 - 60 °C Filter capacity 5 microns 1/4\" 80 40 Cup capacity 60 cc air / 90 cc oil Weight 1.3 kg 1919L 1 019190450 ISO 32 lubricating oilAir in/outlet 1/4” GAS BSPT kgMaximum air capacity 1000 l/min 1,3Maximum pressure 9,5 barOperating pressure 0,5 - 8,5 bar 1919RB-FOperating temperature 5 - 60 °C set of spare cups for filtersFilter capacity 5 microns item 1919F - 1/4”, 3/8” and 1/2”Cup capacity 60 cc air / 90 cc oil Density 20°C 875 Kg/m³Weight 1.3 kg Viscosity 40°C 32 cSt Flammability COC 210°C 1919RB-F cc kg 1 019190250 1 019190510 5 019190050 500 1,3250
Search
Read the Text Version
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
- 251
- 252
- 253
- 254
- 255
- 256
- 257
- 258
- 259
- 260
- 261
- 262
- 263
- 264
- 265
- 266
- 267
- 268
- 269
- 270
- 271
- 272
- 273
- 274
- 275
- 276
- 277
- 278
- 279
- 280
- 281
- 282
- 283
- 284
- 285
- 286
- 287
- 288
- 289
- 290
- 291
- 292
- 293
- 294
- 295
- 296
- 297
- 298
- 299
- 300
- 301
- 302
- 303
- 304
- 305
- 306
- 307
- 308
- 309
- 310
- 311
- 312
- 313
- 314
- 315
- 316
- 317
- 318
- 319
- 320
- 321
- 322
- 323
- 324
- 325
- 326
- 327
- 328
- 329
- 330
- 331
- 332
- 333
- 334
- 335
- 336
- 337
- 338
- 339
- 340
- 341
- 342
- 343
- 344
- 345
- 346
- 347
- 348
- 349
- 350
- 351
- 352
- 353
- 354
- 355
- 356
- 357
- 358
- 359
- 360
- 361
- 362
- 363
- 364
- 365
- 366
- 367
- 368
- 369
- 370
- 371
- 372
- 373
- 374
- 375
- 376
- 377
- 378
- 379
- 380
- 381
- 382
- 383
- 384
- 385
- 386
- 387
- 388
- 389
- 390
- 391
- 392
- 393
- 394
- 395
- 396
- 397
- 398
- 399
- 400
- 401
- 402
- 403
- 404
- 405
- 406
- 407
- 408
- 409
- 410
- 411
- 412
- 413
- 414
- 415
- 416
- 417
- 418
- 419
- 420
- 421
- 422
- 423
- 424
- 425
- 426
- 427
- 428
- 429
- 430
- 431
- 432
- 433
- 434
- 435
- 436
- 437
- 438
- 439
- 440
- 441
- 442
- 443
- 444
- 445
- 446
- 447
- 448
- 449
- 450
- 451
- 452
- 453
- 454
- 455
- 456
- 457
- 458
- 459
- 460
- 461
- 462
- 463
- 464
- 465
- 466
- 467
- 468
- 469
- 470
- 471
- 472
- 473
- 474
- 475
- 476
- 477
- 478
- 479
- 480
- 481
- 482
- 483
- 484
- 485
- 486
- 487
- 488
- 489
- 490
- 491
- 492
- 493
- 494
- 495
- 496
- 497
- 498
- 499
- 500
- 501
- 502
- 503
- 504
- 505
- 506
- 507
- 508
- 509
- 510
- 511
- 512
- 513
- 514
- 515
- 516
- 517
- 518
- 519
- 520
- 521
- 522
- 523
- 524
- 525
- 526
- 527
- 528
- 529
- 530
- 531
- 532
- 1 - 50
- 51 - 100
- 101 - 150
- 151 - 200
- 201 - 250
- 251 - 300
- 301 - 350
- 351 - 400
- 401 - 450
- 451 - 500
- 501 - 532
Pages:
