Lite Linke Brochure

MTP Elite Solutions ®

Data Centre Ready - Modular Connectivity System Contents 4 MTP Modular ® Push Click Connect Cassettes 6 MTP Chassis ® Solutions Repeat 8 MTP Elite ® Solutions 10 MTP Trunk ® Cables A Hyper High Density fibre optic connectivity solution sophistically designed while retaining 12 MTP Harness / simplicity for installation and servicing. ® LC HD Switchable MTP® Elite is the premium branded MPO connector best suited for high fibre count applications. An MTP® 14 Lite Linke connector typically contains up to 24x optical fibres in Accessories the same footprint as a single fibre SC connector. 16 Contact Us Our Push, Click and Connect solution enables rapid installation or reconfigurations. Install as many as 144 fibres in a 1U space with simplicity and modular versatility. Delivering MTP Elite Solutions at Light Speed ® 2 3

Data Centre Ready - Modular Connectivity System Contents 4 MTP Modular ® Push Click Connect Cassettes 6 MTP Chassis ® Solutions Repeat 8 MTP Elite ® Solutions 10 MTP Trunk ® Cables A Hyper High Density fibre optic connectivity solution sophistically designed while retaining 12 MTP Harness / simplicity for installation and servicing. ® LC HD Switchable MTP® Elite is the premium branded MPO connector best suited for high fibre count applications. An MTP® 14 Lite Linke connector typically contains up to 24x optical fibres in Accessories the same footprint as a single fibre SC connector. 16 Contact Us Our Push, Click and Connect solution enables rapid installation or reconfigurations. Install as many as 144 fibres in a 1U space with simplicity and modular versatility. Delivering MTP Elite Solutions at Light Speed ® 2 3

MTP Modular Cassettes ® The Lite Linke MTP Solution is on a 3U system. It allows for a ‘Buy ® a premium grade, exceptionally and Build’ approach as the network high density 19” cassette and grows without demanding more Durable Injection-Moulded chassis system. It operates on valuable U space within a cabinet. PPS Cassette similar lines to conventional networks, in that it has a trunk The ½U cassette is of a tough cable, patch panels at each end durable PPS construction and fitted and jumper cables patching to the with 12x flush mount LC Duplex ® operating hardware. adapters to the front and 2x MTP However, what differentiates adapters to the rear the Lite Linke MTP Solution, is The low loss, laser-safe LC Duplex ® that it provides a more efficient, adapters are colour coded for ease condensed method – a tool-less of fibre type recognition; aqua for and pluggable high density OM4 and blue for single-mode population fibre optic network, The sealed cassette contains without the need for expensive premium grade fan-outs; either on site splicing, which therefore 2x 12f or 1x 24f LC to MTP Elite ® reduces installation time. on OM4 or single-mode fibre, depending on customer requirement. Centred around its sleek injection- moulded 24 fibre (24f) cassette, the Lite To the front of each cassette are two ® Linke MTP Solution presents up to 144f sliding pull tabs which are used to in a 1U and up to 480f in a 3U space. aid removal from the chassis. The pull tabs recess into the cassette for The modular design offers the versatility to present a single 12f link trunk up tidy storage. Each cassette is fitted to 12x 12f links on a 1U, and up to with 4x spring loaded ball bearings a maximum of 40x 12f link trunks which locate inside the chassis with an audible click on correct fitting. *Lite Linke LC Cassettes are only designed for use with LC HD patchcords. Retractable Pull Tab Low Profile Push and Click Laser-Safe LC Adaptors Spring-Ball Key features Hyper High Density - can be scaled up to 144f in 1U and 480f in 3U Virtually tool-less - only a screw-driver required for cage bolt fitting Cassettes held into chassis via spring-ball ‘Push and Click’ fittings Laser safety shutters fitted to all LC adapters to prevent eye damage Uni-Boot patch cords reduce the cable space required by 50% For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 4 5

MTP Modular Cassettes ® The Lite Linke MTP Solution is on a 3U system. It allows for a ‘Buy ® a premium grade, exceptionally and Build’ approach as the network high density 19” cassette and grows without demanding more Durable Injection-Moulded chassis system. It operates on valuable U space within a cabinet. PPS Cassette similar lines to conventional networks, in that it has a trunk The ½U cassette is of a tough cable, patch panels at each end durable PPS construction and fitted and jumper cables patching to the with 12x flush mount LC Duplex ® operating hardware. adapters to the front and 2x MTP However, what differentiates adapters to the rear the Lite Linke MTP Solution, is The low loss, laser-safe LC Duplex ® that it provides a more efficient, adapters are colour coded for ease condensed method – a tool-less of fibre type recognition; aqua for and pluggable high density OM4 and blue for single-mode population fibre optic network, The sealed cassette contains without the need for expensive premium grade fan-outs; either on site splicing, which therefore 2x 12f or 1x 24f LC to MTP Elite ® reduces installation time. on OM4 or single-mode fibre, depending on customer requirement. Centred around its sleek injection- moulded 24 fibre (24f) cassette, the Lite To the front of each cassette are two ® Linke MTP Solution presents up to 144f sliding pull tabs which are used to in a 1U and up to 480f in a 3U space. aid removal from the chassis. The pull tabs recess into the cassette for The modular design offers the versatility to present a single 12f link trunk up tidy storage. Each cassette is fitted to 12x 12f links on a 1U, and up to with 4x spring loaded ball bearings a maximum of 40x 12f link trunks which locate inside the chassis with an audible click on correct fitting. *Lite Linke LC Cassettes are only designed for use with LC HD patchcords. Retractable Pull Tab Low Profile Push and Click Laser-Safe LC Adaptors Spring-Ball Key features Hyper High Density - can be scaled up to 144f in 1U and 480f in 3U Virtually tool-less - only a screw-driver required for cage bolt fitting Cassettes held into chassis via spring-ball ‘Push and Click’ fittings Laser safety shutters fitted to all LC adapters to prevent eye damage Uni-Boot patch cords reduce the cable space required by 50% For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 4 5

MTP Modular Chassis ® 1U Chassis 3U Chassis Capability of 144 fibres Capability of 480 fibres ID Labelling Plate/ Cable ½U Frame Blanks 1U Rear Vertically Loaded - ½U Frame Blanks MTP® Adapters - Management Guide Management Tray LC Keyway Up Keyway Left Key features Key features Hyper High Density - can be scaled up to 144f in 1U space Hyper High Density - can be scaled up to 480f in 3U Virtually tool-less - only a screw-driver required for cage bolt fitting Holds up to twenty ½U 24f cassettes – OM4 or OS2 fibre grades 12f or 24f MTP® connectivity options with 6x modular cassettes Rear loading up to 40x 12f MTP® Elite Connectors or 20x 24f MTP® Elite Connectors Completely pluggable high speed fibre optic network Lite Linke MTP® Cassettes are loaded vertically in a 3U Chassis LC Adapter - Keyway UP, MTP® Adapter - Keyway High Performance and light weight PPS injection moulded material Left (Rear View) For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 6 7

MTP Modular Chassis ® 1U Chassis 3U Chassis Capability of 144 fibres Capability of 480 fibres ID Labelling Plate/ Cable ½U Frame Blanks 1U Rear Vertically Loaded - ½U Frame Blanks MTP® Adapters - Management Guide Management Tray LC Keyway Up Keyway Left Key features Key features Hyper High Density - can be scaled up to 144f in 1U space Hyper High Density - can be scaled up to 480f in 3U Virtually tool-less - only a screw-driver required for cage bolt fitting Holds up to twenty ½U 24f cassettes – OM4 or OS2 fibre grades 12f or 24f MTP® connectivity options with 6x modular cassettes Rear loading up to 40x 12f MTP® Elite Connectors or 20x 24f MTP® Elite Connectors Completely pluggable high speed fibre optic network Lite Linke MTP® Cassettes are loaded vertically in a 3U Chassis LC Adapter - Keyway UP, MTP® Adapter - Keyway High Performance and light weight PPS injection moulded material Left (Rear View) For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 6 7

MTP Elite Solutions ® MTP Modular Cassette 1U 19” Chassis 3U 19” Chassis LC HD Uni-Boot Switchable ® Injection-moulded cassette 6x 24f cassettes 20x 24f injection-moulded cassettes Two fibres in a single LSZH jacket 24x LC laser-safe adapters 144f ports 480f ports Easy to remove in high density populated cassettes ® 2x 12f MTP adapters Integral cable management Lightweight and robust PPS material Polarity switchable in the field (separate tool) MTP Trunk Cables MTP Multi-Trunks MTP Harness Assembly MTP Terminations ® ® ® ® ® 12f or 24f MTP Elite Connectors Multi-Lite trunk up to 48f MTP Elite to LC HD switchable connectors Market leading MTP Elite Connectors ® ® OM3, OM4 or single-mode Multi-Tuff trunk up to 144f Suitable for parallel optics and Infiniband State-of-the-art UK termination facility Made in the UK to custom length Custom manufactured in the UK 12f and 24f versions available Rapid manufacturing turnaround For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 8 9

MTP Elite Solutions ® MTP Modular Cassette 1U 19” Chassis 3U 19” Chassis LC HD Uni-Boot Switchable ® Injection-moulded cassette 6x 24f cassettes 20x 24f injection-moulded cassettes Two fibres in a single LSZH jacket 24x LC laser-safe adapters 144f ports 480f ports Easy to remove in high density populated cassettes ® 2x 12f MTP adapters Integral cable management Lightweight and robust PPS material Polarity switchable in the field (separate tool) MTP Trunk Cables MTP Multi-Trunks MTP Harness Assembly MTP Terminations ® ® ® ® ® 12f or 24f MTP Elite Connectors Multi-Lite trunk up to 48f MTP Elite to LC HD switchable connectors Market leading MTP Elite Connectors ® ® OM3, OM4 or single-mode Multi-Tuff trunk up to 144f Suitable for parallel optics and Infiniband State-of-the-art UK termination facility Made in the UK to custom length Custom manufactured in the UK 12f and 24f versions available Rapid manufacturing turnaround For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 8 9

MTP Trunk Cables ® ® ® ® MTP Lite Trunk Cables MTP Tuff Trunk Cables MTP Multi-Lite Trunk Cables MTP Multi-Tuff Trunk Cables ® MTP Lite Trunk Cables are of a lightweight single jacket MTP Tuff Trunk Cables are of a robust, double- jacket MTP Multi-Lite Trunk Cables are a neat solution for The MTP Multi-Tuff trunk cables are designed to route up to ® ® ® ® ® ® construction, designed to optimise space saving of trunk construction, designed for longer length trunk patching. providing up to 4x MTP to MTP links within one 12x 12f trunks within one multi-loose tube cable. patching. The 12f cable has a 3.2mm outer diameter (OD) Incredibly, the provision of a second jacket benefits the cable ruggedized cable thus reducing the need to install four The LT Maxi Break-out with 2mm compression gland fitted as while the 24f version is marginally larger at 3.8mm. by an additional 500N of crush resistance to an overall total of seperate cables. standard enablle the assembly to be fitted firectly to a patch 1000N. The cables retain their compactness with only 4.7mm These compact cables are packed with Kevlar which Our Slimline break-out has the option of being fitted with a 20mm panel, ODF or closure. ® OD for 12f and 5.4mm for the 24f version. These cables are provides the necessary endurance for routing and patching gland for installation into a patch panel or other closure. packed with Kevlar® which provides the necessary endurance Our standard presentation for each tail length is 0.5mtr with a purposes, though best used within a comms room or data for routing and patching purposes, providing links between Our standard tail configuration is flush and to a 0.5mtr length flush configuration. However, we do offer up to 2mtr tail lengths suite environment, as opposed to backbone cabling. comms rooms or data centres. though we can make up to 2mtr and staggered so as to fit an with an optional stagger and fitted with an installation protection installation protection sock sock. On both the MTP Lite Trunk and MTP Tuff Trunk Cables, only ® ® genuine MTP Connectors are fitted. The Elite MTP ferrule is The cable construction consists of a 48core Multi-Loose Tube with Multi-Tuff trunks make use of multi-loose tube cables, with their ® designed for applications requiring the highest performance. a nominal 10mm LSZH jacket. trusted mechanical properties and low losses, all within a Low It provides exceptional benefits over the conventional MPO Smoke Zero Hallogen (LSZH) jacket. connectors, including patented floating ferrule design, patented elliptical, high precision guide pins and removable housing, allowing rapid gender change and reversing polarity. In addition, both the MTP Lite Trunk and MTP Tuff Trunk Cables facilitate ® ® rapid deployment of high density backbone cabling in data centres and other high fibre count environments, reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MTP Harness links. ® Key features MTP are high density connectors ® with up to 24f in a traditional SC Simplex adapter footprint ® MTP Trunk Assemblies present a ‘Push and Click’ to connect for rapid installation of high fibre count network links. For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 10 11

MTP Trunk Cables ® ® ® ® MTP Lite Trunk Cables MTP Tuff Trunk Cables MTP Multi-Lite Trunk Cables MTP Multi-Tuff Trunk Cables ® MTP Lite Trunk Cables are of a lightweight single jacket MTP Tuff Trunk Cables are of a robust, double- jacket MTP Multi-Lite Trunk Cables are a neat solution for The MTP Multi-Tuff trunk cables are designed to route up to ® ® ® ® ® ® construction, designed to optimise space saving of trunk construction, designed for longer length trunk patching. providing up to 4x MTP to MTP links within one 12x 12f trunks within one multi-loose tube cable. patching. The 12f cable has a 3.2mm outer diameter (OD) Incredibly, the provision of a second jacket benefits the cable ruggedized cable thus reducing the need to install four The LT Maxi Break-out with 2mm compression gland fitted as while the 24f version is marginally larger at 3.8mm. by an additional 500N of crush resistance to an overall total of seperate cables. standard enablle the assembly to be fitted firectly to a patch 1000N. The cables retain their compactness with only 4.7mm These compact cables are packed with Kevlar which Our Slimline break-out has the option of being fitted with a 20mm panel, ODF or closure. ® OD for 12f and 5.4mm for the 24f version. These cables are provides the necessary endurance for routing and patching gland for installation into a patch panel or other closure. packed with Kevlar® which provides the necessary endurance Our standard presentation for each tail length is 0.5mtr with a purposes, though best used within a comms room or data for routing and patching purposes, providing links between Our standard tail configuration is flush and to a 0.5mtr length flush configuration. However, we do offer up to 2mtr tail lengths suite environment, as opposed to backbone cabling. comms rooms or data centres. though we can make up to 2mtr and staggered so as to fit an with an optional stagger and fitted with an installation protection installation protection sock sock. On both the MTP Lite Trunk and MTP Tuff Trunk Cables, only ® ® genuine MTP Connectors are fitted. The Elite MTP ferrule is The cable construction consists of a 48core Multi-Loose Tube with Multi-Tuff trunks make use of multi-loose tube cables, with their ® designed for applications requiring the highest performance. a nominal 10mm LSZH jacket. trusted mechanical properties and low losses, all within a Low It provides exceptional benefits over the conventional MPO Smoke Zero Hallogen (LSZH) jacket. connectors, including patented floating ferrule design, patented elliptical, high precision guide pins and removable housing, allowing rapid gender change and reversing polarity. In addition, both the MTP Lite Trunk and MTP Tuff Trunk Cables facilitate ® ® rapid deployment of high density backbone cabling in data centres and other high fibre count environments, reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MTP Harness links. ® Key features MTP are high density connectors ® with up to 24f in a traditional SC Simplex adapter footprint ® MTP Trunk Assemblies present a ‘Push and Click’ to connect for rapid installation of high fibre count network links. For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 10 11

MTP Harness Assembly LC HD Uni-Boot Switchable ® Ruggedised Harnesses or hydra fan-outs, as they are sometimes known, allow the Utilising the feature packed LC HD direct connection between MTP adapters and other connector types, such as LC. Uni-Boot Switchable Connector on ® They are often referred to as QSFP cable links for SR4 and CXP parallel optics assemblies offers the opportunity to applications. make the most efficient use of rack space. Typically used with QSFP 40G SR4 connectivity, with tail break-out units split into 8f or 4x 10G channels, they enable direct patching from the MTP port on the switch Combining two fibres into a single ® ® to LC port on the MTP Cassettes. The harnesses are manufactured to a custom round 3mm jacket can save up to length and are interoperable between differing QSFP module manufacturers. Key features half the patching cable space, while the disconnection latch makes for Lite Linke QSFP Cable Harness examples: Direct connection from active easy removal of the assembly without equipment to backbone 12f cables – 12f MTP to 4x, 8x or 12x LC disturbing the neighbouring ports. ® cabling via modular cassettes ® ® ® 24f cables – 1x 24f MTP to 24x LC or 1x 24f MTP to 2x 12f MTP or 1x 24f Testing exceeds industry The connector has been further ® MTP to 3x 8f MTP ® standards with 100% visual, enhanced with the ability to switch ® ® ® 48f cables – 4x 12f MTP to 4x 12f MTP or 2x 24f MTP to 2x 24f MTP or 100% ILM and 100% polarity in the field without the ® ® 2x 24f MTP to 4x 12f MTP or 2x 24f MTP to 3x 16f MTP ® interferometer testing for need for re-termination making it ® ® There is a choice of strain relief boots; flexi-boot, short or standard options. complete confidence extremely flexible. It is also available The flexi-boot reduces the need for cable management as the boot is High Spring Force (HSF) in a variety of boot options including ® simply positioned as required and is retained by the integral support wire. MTP Connectors ensure short and flexi-boot to meet varying The short boot option, at 18mm in length, provides the smallest bend radius uniform alignment across preferences in cable management. and is useful where the front of panel patching distance is very short. 24x lanes and optimise the Colour coded cables and connector physical contact. options are available to suit The LC HD Uni-Boot is our most compact solution providing two fibres in a single LC HD Switchable, LC HD OM3, OM4, OM4+ and SM tube with the added benefit of a switchable LC pull tab enabling removal of Simplex and LC Dx Available G.652.D and G.657A2 fibres. the connector without disturbing neighbouring ports. The switchable function allows for changing of polarity of the LC Connector, post manufacture. Key features LC Duplex Connector with single boot and cable jacket - reduces cabling space required for easy management Allows for use of stacked LC adapters thus increasing population density *Lite Linke LC Cassettes are only designed for use with LC HD patchcords. For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 12 13

MTP Harness Assembly LC HD Uni-Boot Switchable ® Ruggedised Harnesses or hydra fan-outs, as they are sometimes known, allow the Utilising the feature packed LC HD direct connection between MTP adapters and other connector types, such as LC. Uni-Boot Switchable Connector on ® They are often referred to as QSFP cable links for SR4 and CXP parallel optics assemblies offers the opportunity to applications. make the most efficient use of rack space. Typically used with QSFP 40G SR4 connectivity, with tail break-out units split into 8f or 4x 10G channels, they enable direct patching from the MTP port on the switch Combining two fibres into a single ® ® to LC port on the MTP Cassettes. The harnesses are manufactured to a custom round 3mm jacket can save up to length and are interoperable between differing QSFP module manufacturers. Key features half the patching cable space, while the disconnection latch makes for Lite Linke QSFP Cable Harness examples: Direct connection from active easy removal of the assembly without equipment to backbone 12f cables – 12f MTP to 4x, 8x or 12x LC disturbing the neighbouring ports. ® cabling via modular cassettes ® ® ® 24f cables – 1x 24f MTP to 24x LC or 1x 24f MTP to 2x 12f MTP or 1x 24f Testing exceeds industry The connector has been further ® MTP to 3x 8f MTP ® standards with 100% visual, enhanced with the ability to switch ® ® ® 48f cables – 4x 12f MTP to 4x 12f MTP or 2x 24f MTP to 2x 24f MTP or 100% ILM and 100% polarity in the field without the ® ® 2x 24f MTP to 4x 12f MTP or 2x 24f MTP to 3x 16f MTP ® interferometer testing for need for re-termination making it ® ® There is a choice of strain relief boots; flexi-boot, short or standard options. complete confidence extremely flexible. It is also available The flexi-boot reduces the need for cable management as the boot is High Spring Force (HSF) in a variety of boot options including ® simply positioned as required and is retained by the integral support wire. MTP Connectors ensure short and flexi-boot to meet varying The short boot option, at 18mm in length, provides the smallest bend radius uniform alignment across preferences in cable management. and is useful where the front of panel patching distance is very short. 24x lanes and optimise the Colour coded cables and connector physical contact. options are available to suit The LC HD Uni-Boot is our most compact solution providing two fibres in a single LC HD Switchable, LC HD OM3, OM4, OM4+ and SM tube with the added benefit of a switchable LC pull tab enabling removal of Simplex and LC Dx Available G.652.D and G.657A2 fibres. the connector without disturbing neighbouring ports. The switchable function allows for changing of polarity of the LC Connector, post manufacture. Key features LC Duplex Connector with single boot and cable jacket - reduces cabling space required for easy management Allows for use of stacked LC adapters thus increasing population density *Lite Linke LC Cassettes are only designed for use with LC HD patchcords. For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] 12 13

Lite Linke Accessories IBC Cleaning Tools 1U Rear Management Tray Insert and click to clean - 525+ cleans per unit Heavy duty mild steel construction Cleans LC & MTP male and female connectors and ® 24x cable retention positions inside adapters Includes cable retainers and ties Suitable for multimode & single-mode (8°APC) Cletop Cleaning Tools Brady Label Printer Kit BMP21-PLUS Replacement reels are easy to install and reduce the cost per cleaning Rugged and durable Brady printer 400+ cleanings This printer ships in a hard case with a a Li-ion Battery, UK Power Cord + Accessories Eliminates electrostatic charge Optipop Cleaning Tools Visual Fault Locator 1.25mm Replacement reels are easy to install and reduce the Multimode and Singlemode fibre compatibilty cost per cleaning Class 3A laser diode 400+ cleanings Output mode in either Continuous or Flashing (2-3 Hz) Eliminates electrostatic charge MTP® Accessories Test Reference Leads MTP® Push-Pull Tab for easy extraction in densely Low insertion loss, high return loss populated cabinets A Grade connectors - Max <0.15 dB MTP® Loopback assemblies are custom made to suit Optimised geometry and enhanced optical performance method required, utilising 12 or 24f connectors EXFO FIP-400 and ConnectorMax2 Switchable / Removable Tool Capture, analyse & save images to PC or The LC Switchable HD Tool allows polarity change Android devices within an LC Duplex connector Wifi FIP-400 Inspection & ConnectorMax2 software The MTP® Housing Removable Tool allows for easy MTP®, single fibre connector & adapter tips available and efficient polarity change For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] All information provided within this brochure is correct at the time of publishing/printing. 14 15

Lite Linke Accessories IBC Cleaning Tools 1U Rear Management Tray Insert and click to clean - 525+ cleans per unit Heavy duty mild steel construction Cleans LC & MTP male and female connectors and ® 24x cable retention positions inside adapters Includes cable retainers and ties Suitable for multimode & single-mode (8°APC) Cletop Cleaning Tools Brady Label Printer Kit BMP21-PLUS Replacement reels are easy to install and reduce the cost per cleaning Rugged and durable Brady printer 400+ cleanings This printer ships in a hard case with a a Li-ion Battery, UK Power Cord + Accessories Eliminates electrostatic charge Optipop Cleaning Tools Visual Fault Locator 1.25mm Replacement reels are easy to install and reduce the Multimode and Singlemode fibre compatibilty cost per cleaning Class 3A laser diode 400+ cleanings Output mode in either Continuous or Flashing (2-3 Hz) Eliminates electrostatic charge MTP® Accessories Test Reference Leads MTP® Push-Pull Tab for easy extraction in densely Low insertion loss, high return loss populated cabinets A Grade connectors - Max <0.15 dB MTP® Loopback assemblies are custom made to suit Optimised geometry and enhanced optical performance method required, utilising 12 or 24f connectors EXFO FIP-400 and ConnectorMax2 Switchable / Removable Tool Capture, analyse & save images to PC or The LC Switchable HD Tool allows polarity change Android devices within an LC Duplex connector Wifi FIP-400 Inspection & ConnectorMax2 software The MTP® Housing Removable Tool allows for easy MTP®, single fibre connector & adapter tips available and efficient polarity change For detailed specifications contained in our product data sheets, please go to the product page on our website www.litelinke.com or contact us at [email protected] All information provided within this brochure is correct at the time of publishing/printing. 14 15

Contact us Unit 15 Lite Linke Buildings St. Asaph Business Park St. Asaph Denbighshire LL17 0LJ e [email protected] w www.litelinke.com