Scan-Speak Products 2020

PRODUCTS 2020 OUR PHILOSOPHY IS SIMPLE: THE EMITTED SOUND MUST BE DYNAMIC, GIVING A TRANSIENT RESPONSE AND PROVIDING TONAL BALANCE.

Ellipticor With the Ellipticor family we have broken away from the traditional circular motor structures and resolved their inherent breakup behavior. Perhaps not surprisingly judging by the name, Ellipticor’s key features are an elliptical shaped voice coil and magnet gap. Combined with our powerful SD AirCirc principle the Ellipticor transducers have high sensitivity, very low distortion, and have an extremely fast response to transients. In particular the sonic performance of the midrange and treble is outstanding. The sound is clean, transparent and has amazing transient behavior. There is absolutely nothing that´s introverted about these drivers. Above all a TRUE TO LIVE sound makes Ellipticors among the very best loudspeaker transducers on the market! At present our Ellipticor family is small but work is in progress to expand the family with more models and sizes to fit our customer’s needs for outstanding high end transducers.

Ellipticor OVERVIEW Tweeters Size fs Re Qms Qes Qts Sens. VAS Bl Mms Xmax ± VC dia. D3404/552000 [Inch.] [Hz] [Ω] [dB] [l] [Tm] [g] [mm] [mm] Midwoofers 1.3 475 3 5.25 0.63 0.57 97 0.04 2.8 0.57 0.25 28/39 18WE/4542T00 18WE/8542T00 Size fs Re Qms Qes Qts Sens. VAS Bl Mms Xmax ± VC dia. 21WE/4542T00 [Inch.] [Hz] [Ω] [dB] [l] [Tm] [g] [mm] [mm] 21WE/8542T00 6.5 46 3.4 5.62 0.26 0.25 92.5 17.2 8.1 17.5 7.2 35/45 6.5 50 6.3 5.01 0.34 0.32 89 16 9.7 16 7.7 35/45 8 38 3.4 5.43 0.30 0.28 93.5 54 8.2 25 7.2 35/45 8 36 6.3 6.33 0.40 0.38 91 54 10 28 7.7 35/45

Ellipticor 34 mm Dome Tweeter D3404/552000 Key Features: T-S Parameters: 475 Hz Elliptic voice coil Resonance frequency [fs] 5.25 AirCirc optimized magnetsystem Mechanical Q factor [Qms] 0.63 Low mechanical losses Electrical Q factor [Qes] 0.57 Exceptionally low distortion Total Q factor [Qts] 2.8 Tm High sensitivity (SPL) Force factor [Bl] 0.32 kg/s Flexible optics with replaceble decor ring Mechanical resistance [Rms] 0.57 g Recommendations (please see Tech Note): Moving mass [Mms] 0.20 mm/N Operating frequency range: 2500-20000 Hz Compliance [Cms] ~38 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 11.4 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.04 l Equivalent volume [Vas] 97 dB Sensitivity (2,83V/1m) Mechanical Data: 28/39 mm Voice coil diameter 2.5 mm Voice coil height 2 Voice coil layers 3 mm Gap height ± 0.25 mm Linear excursion ± 2 mm Max mech. excursion 0.75 kg Unit weight 0.13 l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 4.0 Ω Minimum impedance [Zmin] 30 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.01 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 180 W Long-term max power (IEC 18.2) 300 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Ellipticor 18 cm Midwoofer 18WE/4542T00 Key Features: T-S Parameters: 46 Hz Elliptic voice coil Resonance frequency [fs] 5.62 AirCirc optimized magnetsystem Mechanical Q factor [Qms] 0.26 Very low mechanical losses Electrical Q factor [Qes] 0.25 Exceptionally low distortion Total Q factor [Qts] 8.1 Tm High sensitivity (SPL) Force factor [Bl] 0.9 kg/s Flexible appearence with replaceable decor ring Mechanical resistance [Rms] 17.5 g Recommendations (please see Tech Note): Moving mass [Mms] 0.68 mm/N Operating frequency range: fs-6000 Hz Compliance [Cms] 130 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 133 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 17.2 l Equivalent volume [Vas] 92.5 dB Sensitivity (2,83V/1m) 35/45 mm Mechanical Data: 19.5 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 7.2 mm Gap height ± 12 mm Linear excursion 1.7 kg Max mech. excursion 0.32 l Unit weight Cabinet Displacement Volume 4Ω 4.1 Ω Electrical Data: 76 Ω Nominal impedance [Zn] 3.4 Ω Minimum impedance [Zmin] 0.1 mH Maximum impedance [Zo] DC resistance [Re] 50 W Voice coil inductance [Le] 100 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Ellipticor 18 cm Midwoofer 18WE/8542T00 Key Features: T-S Parameters: 50 Hz Elliptic voice coil Resonance frequency [fs] 5.01 AirCirc optimized magnetsystem Mechanical Q factor [Qms] 0.34 Very low mechanical losses Electrical Q factor [Qes] 0.32 Exceptionally low distortion Total Q factor [Qts] 9.7 Tm High sensitivity (SPL) Force factor [Bl] 1 kg/s Flexible appearence with replaceable decor ring Mechanical resistance [Rms] 16 g Recommendations (please see Tech Note): Moving mass [Mms] 0.64 mm/N Operating frequency range: fs-6000 Hz Compliance [Cms] 130 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 133 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 16 l Equivalent volume [Vas] 89 dB Sensitivity (2,83V/1m) 35/45 mm Mechanical Data: 20.4 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 7.7 mm Gap height ± 12 mm Linear excursion 1.7 kg Max mech. excursion 0.32 l Unit weight Cabinet Displacement Volume 8Ω 7.6 Ω Electrical Data: 100 Ω Nominal impedance [Zn] 6.3 Ω Minimum impedance [Zmin] 0.14 mH Maximum impedance [Zo] DC resistance [Re] 50 W Voice coil inductance [Le] 100 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Ellipticor 21 cm Midwoofer 21WE/4542T00 Key Features: T-S Parameters: 38 Hz Elliptic voice coil Resonance frequency [fs] 5.43 Very low mechanical losses Mechanical Q factor [Qms] 0.30 High sensitivity (SPL) Electrical Q factor [Qes] 0.28 AirCirc optimized magnetsystem Total Q factor [Qts] 8.2 Tm Exceptionally low distortion Force factor [Bl] 1.1 kg/s Flexible appearence with replaceable decor ring Mechanical resistance [Rms] 25 g Recommendations (please see Tech Note): Moving mass [Mms] 0.70 mm/N Operating frequency range: fs-6000 Hz Compliance [Cms] 172 mm Cabinet volume - closed box: Vbox=12 ltr, f(-3dB)=88 Hz Effective diaph. diameter [D] 233 cm² Cabinet volume - vented box: Vbox=21 ltr, fb=50 Hz, f(-3dB)=57 Hz Effective piston area [Sd] 54 l Equivalent volume [Vas] 93.5 dB Sensitivity (2,83V/1m) 35/45 mm Mechanical Data: 19.5 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 7.2 mm Gap height ± 12 mm Linear excursion 1.8 kg Max mech. excursion 0.49 l Unit weight Cabinet Displacement Volume 4Ω 4.3 Ω Electrical Data: 57 Ω Nominal impedance [Zn] 3.4 Ω Minimum impedance [Zmin] 0.1 mH Maximum impedance [Zo] DC resistance [Re] 50 W Voice coil inductance [Le] 100 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Ellipticor 21 cm Midwoofer 21WE/8542T00 Key Features: T-S Parameters: 36 Hz Elliptic voice coil Resonance frequency [fs] 6.33 Very low mechanical losses Mechanical Q factor [Qms] 0.40 High sensitivity (SPL) Electrical Q factor [Qes] 0.38 AirCirc optimized magnetsystem Total Q factor [Qts] 10 Tm Exceptionally low distortion Force factor [Bl] 1 kg/s Flexible appearence with replaceable decor ring Mechanical resistance [Rms] 28 g Recommendations (please see Tech Note): Moving mass [Mms] 0.7 mm/N Operating frequency range: fs-6000 Hz Compliance [Cms] 172 mm Cabinet volume - closed box: Vbox=25 ltr, f(-3dB)=64 Hz Effective diaph. diameter [D] 233 cm² Cabinet volume - vented box: Vbox=51 ltr, fb=37 Hz, f(-3dB)=37 Hz Effective piston area [Sd] 54 l Equivalent volume [Vas] 91 dB Sensitivity (2,83V/1m) 35/45 mm Mechanical Data: 20.4 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 7.7 mm Gap height ± 12 mm Linear excursion 1.8 kg Max mech. excursion 0.49 l Unit weight Cabinet Displacement Volume 8Ω 7.3 Ω Electrical Data: 80 Ω Nominal impedance [Zn] 6.3 Ω Minimum impedance [Zmin] 0.2 mH Maximum impedance [Zo] DC resistance [Re] 50 W Voice coil inductance [Le] 100 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.



Illuminator Products in the Illuminator family feature a wealth of advanced technologies, materials and sophisticated designs. Their common features are the underhung voice coil configuration and a large linear excursion capability. Carefully designed and combined with a unique cone structure, the transparency, detail and lack of distortion even at higher levels is hard to find elsewhere. In the end it all comes down to one thing; a loudspeaker should not have a sound of its own and should faithfully reproduce the signal flowing through the voice coil without adding or removing anything. The transducers in the Illuminator family do that better than most other products that we know of!

Illuminator OVERVIEW Tweeters Size fs Re Qms Qes Qts Sens. VAS Bl Mms Xmax ± VC dia. [Inch.] [Hz] [Ω] [dB] [l] [Tm] [g] [mm] [mm] D2004/602000 600 2.8 4.42 1.42 1.07 88.5 0.01 1.3 0.22 0.4 19 D3004/602000 0.75 700 4.15 1.60 1.15 89 0.01 1.7 0.35 0.2 26 D3004/602010 1 425 3 2.50 0.97 0.70 89.5 0.03 1.7 0.35 0.2 26 D3004/604000 1 750 3 4.02 2.18 1.41 90.5 0.01 1.20 0.24 0.2 26 D3004/604010 1 450 2.85 2.50 0.97 0.70 90.5 0.03 1.7 0.35 0.2 26 D3004/660000 1 470 3 3.00 0.59 0.49 91.5 0.02 2.3 0.35 0.2 26 D3004/662000 1 500 3 3.79 0.62 0.54 91.5 0.02 2.3 0.35 0.2 26 D3004/664000 1 500 3 3.79 0.62 0.54 91.5 0.02 2.3 0.35 0.2 26 R2004/602000 1 675 3 3.01 1.51 1.01 86 0.01 1.3 0.22 0.4 19 R3004/602000 625 2.8 5.73 1.43 1.14 87.5 0.01 1.7 0.35 0.2 26 R3004/602010 0.75 420 3 2.57 1.03 0.74 87.5 0.02 1.7 0.35 0.2 26 R3004/662000 1 520 3 3.27 0.56 0.48 90.5 0.01 2.3 0.3 0.2 26 1 3 Midranges/Fullranges 1 Qms Qes Re 12MU/4731T00 Size fs [Ω] 3.64 0.26 Qts Sens. VAS Bl Mms Xmax ± VC dia. 12MU/8731T00 [Inch.] [Hz] 3.1 3.63 0.31 [dB] [l] [Tm] [g] [mm] [mm] 5.9 0.24 Midwoofers 4 64 Qms Qes 0.29 90 5.4 5.1 5.4 3.5 32 Re 15WU/4741T00 4 66 [Ω] 3.47 0.25 87 5.8 6.1 4.7 3.4 32 15WU/8741T00 3.2 3.37 0.28 18WU/4741T00 Size fs 5.9 3.76 0.39 Qts Sens. VAS Bl Mms Xmax ± VC dia. 18WU/8741T00 [Inch.] [Hz] 3.3 3.78 0.44 [dB] [l] [Tm] [g] [mm] [mm] 34 5.8 0.23 86 20.0 13 9 42 Woofers 5.5 35 Qms Qes 0.26 83.5 19.9 6 12.3 9 42 5.5 34 Re 0.36 87.5 38.4 7.5 19.1 9 42 18WU/4747T00 6.5 35 [Ω] 3.72 0.39 0.39 85.5 37.1 5.9 18.5 9 42 18WU/8747T00 6.5 3.3 3.72 0.43 7.3 5.8 Size fs Qts Sens. VAS Bl Mms Xmax ± VC dia. [Inch.] [Hz] [dB] [l] [Tm] [g] [mm] [mm] 0.35 6.5 36 0.38 87.5 36 5.9 18.1 9 42 6.5 36 85.5 36.2 7.4 18 9 42

Illuminator 19 mm Dome Tweeter D2004/602000 Key Features: T-S Parameters: 600 Hz 3/4\" Textile Dome Diaphragm Resonance frequency [fs] 4.42 Large Roll Surround f. Wide Dispersion Mechanical Q factor [Qms] 1.42 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 1.07 Sound Transparant Protective Grill Total Q factor [Qts] 1.3 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.2 kg/s Die Cast Housing & Face Plate Mechanical resistance [Rms] 0.22 g Recommendations (please see Tech Note): Moving mass [Mms] 0.32 mm/N Operating frequency range: 3000-30000 Hz Compliance [Cms] 24 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 4.5 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 88.5 dB Sensitivity (2,83V/1m) Mechanical Data: 19 mm Voice coil diameter 1.8 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.4 mm Linear excursion ± 1.6 mm Max mech. excursion 0.1 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.4 Ω Minimum impedance [Zmin] 11.5 Ω Maximum impedance [Zo] 2.8 Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 120 W X-over: 2. order HP Butterworth, 3 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter D3004/602000 Key Features: T-S Parameters: 700 Hz 1\" Textile Dome Diamphragm Resonance frequency [fs] 4.15 Large Roll Surround f. Wide Dispersion Mechanical Q factor [Qms] 1.60 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 1.15 Sound Transparant Protective Grill Total Q factor [Qts] 1.7 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.4 kg/s Die Cast Housing & Face Plate Mechanical resistance [Rms] 0.35 g Recommendations (please see Tech Note): Moving mass [Mms] 0.15 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 89 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.15 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.5 Ω Minimum impedance [Zmin] 10.8 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 130 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter D3004/602010 Key Features: T-S Parameters: 425 Hz 1\" Textile Dome Diamphragm Resonance frequency [fs] 2.50 Large Roll Surround f. Wide Dispersion Mechanical Q factor [Qms] 0.97 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.70 Sound Transparant Protective Grill Total Q factor [Qts] 1.7 Tm Large Non Resonant Alu Rear Chamber Force factor [Bl] 0.4 kg/s Die Cast Housing & Face Plate Mechanical resistance [Rms] 0.35 g Recommendations (please see Tech Note): Moving mass [Mms] 0.40 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.03 l Equivalent volume [Vas] 89.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.2 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.6 Ω Minimum impedance [Zmin] 10.7 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 130 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter D3004/604000 Key Features: T-S Parameters: 750 Hz 1\" Beryllium Diaphragm (99% pure Be) Resonance frequency [fs] 4.02 Large Roll Surround f. wide dispersion Mechanical Q factor [Qms] 2.18 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 1.41 Compact Non Resonant Alu Rear Champer Total Q factor [Qts] 1.20 Tm Die Cast Housing & Face Plate Force factor [Bl] 0.28 kg/s Sound Transparant Protective Grill Mechanical resistance [Rms] 0.24 g Recommendations (please see Tech Note): Moving mass [Mms] 0.19 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 90.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.15 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.6 Ω Minimum impedance [Zmin] 10.9 Ω Maximum impedance [Zo] 2.85 Ω DC resistance [Re] 0.03 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 100 W X-over: 2. order HP Butterworth, 2,5kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter D3004/604010 Key Features: T-S Parameters: 450 Hz 1\" Beryllium diaphragm (99% pure BE) Resonance frequency [fs] 2.50 Patented symetrical drive (SD-2) motor Mechanical Q factor [Qms] 0.97 Large non resonant aluminium enclosure Electrical Q factor [Qes] 0.70 Large roll surround f. wide dispersion Total Q factor [Qts] 1.7 Tm Die Cast Housing & Face Plate Force factor [Bl] 0.4 kg/s Sound Transparant Protective Grill Mechanical resistance [Rms] 0.35 g Recommendations (please see Tech Note): Moving mass [Mms] 0.43 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.03 l Equivalent volume [Vas] 90.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.2 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.6 Ω Minimum impedance [Zmin] 11.2 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 100 W X-over: 2. order HP Butterworth, 2,5kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter D3004/660000 Key Features: T-S Parameters: 470 Hz 1\" Textile Dome Diaphragm Resonance frequency [fs] 3.00 Large Roll Surround f. Wide Dispersion Mechanical Q factor [Qms] 0.59 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.49 AirCirc Motor Design w. 6 Neo magnets Total Q factor [Qts] 2.3 Tm Die Cast Rubber Painted Alu Face Plate Force factor [Bl] 0.3 kg/s Recommendations (please see Tech Note): Mechanical resistance [Rms] 0.35 g Operating frequency range: 2500-30000 Hz Moving mass [Mms] 0.33 mm/N Cabinet volume - closed box: N.a. Compliance [Cms] 30 mm Cabinet volume - vented box: N.a. Effective diaph. diameter [D] 7 cm² Effective piston area [Sd] 0.02 l Equivalent volume [Vas] 91.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.3 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.5 Ω Minimum impedance [Zmin] 18.4 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.03 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 90 W Long-term max power (IEC 18.2) 150 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter D3004/662000 Key Features: T-S Parameters: 500 Hz 1\" Textile Dome Diaphragm Resonance frequency [fs] 3.79 Large Roll Surround f. Wide Dispersion Mechanical Q factor [Qms] 0.62 Magnet System w. Alu Ring Electrical Q factor [Qes] 0.54 AirCirc Motor Design w. 6 Neo magnets Total Q factor [Qts] 2.3 Tm Diffraction Damping Rubber Front Force factor [Bl] 0.29 kg/s Die Cast Rubber Painted Alu Face Plate Mechanical resistance [Rms] 0.35 g Recommendations (please see Tech Note): Moving mass [Mms] 0.29 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.02 l Equivalent volume [Vas] 91.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.3 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.9 Ω Minimum impedance [Zmin] 21.2 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.03 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 90 W Long-term max power (IEC 18.2) 150 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter D3004/664000 Key Features: T-S Parameters: 500 Hz Beryllium Diaphragm (99% Pure Be) Resonance frequency [fs] 3.79 AirCirc Motor Design w. 6 Neo magnets Mechanical Q factor [Qms] 0.62 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.54 Large Roll Surround f. Wide Dispersion Total Q factor [Qts] 2.3 Tm Black Rubber Painted Die Cast Faceplate Force factor [Bl] 0.29 kg/s Non-Magnetic Protective Grill Mechanical resistance [Rms] 0.35 g Recommendations (please see Tech Note): Moving mass [Mms] 0.29 mm/N Operating frequency range: 2500-40000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.02 l Equivalent volume [Vas] 91.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.3 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.6 Ω Minimum impedance [Zmin] 21.2 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.03 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 90 W Long-term max power (IEC 18.2) 150 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter R2004/602000 Key Features: T-S Parameters: 675 Hz 3/4\" Ring Dome Diaphragm Resonance frequency [fs] 3.01 Patented Phase Plug Design Mechanical Q factor [Qms] 1.51 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 1.01 Sound Transparant Protective Grill Total Q factor [Qts] 1.3 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.3 kg/s Die Cast Housing & Face Plate Mechanical resistance [Rms] 0.22 g Recommendations (please see Tech Note): Moving mass [Mms] 0.25 mm/N Operating frequency range: 3000-30000 Hz Compliance [Cms] 22 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 3.8 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 86 dB Sensitivity (2,83V/1m) Mechanical Data: 19 mm Voice coil diameter 1.8 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.4 mm Linear excursion ± 1.6 mm Max mech. excursion 0.1 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 4.5 Ω Minimum impedance [Zmin] 8.4 Ω Maximum impedance [Zo] 2.8 Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 180 W X-over: 2. order HP Butterworth, 3 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter R3004/602000 Key Features: T-S Parameters: 625 Hz 1\" Ring Dome Diaphragm Resonance frequency [fs] 5.73 Patented Phase Plug Design Mechanical Q factor [Qms] 1.43 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 1.14 Sound Transparant Protective Grill Total Q factor [Qts] 1.7 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.24 kg/s Die Cast Housing & Face Plate Mechanical resistance [Rms] 0.35 g Recommendations (please see Tech Note): Moving mass [Mms] 0.19 mm/N Operating frequency range: 2500-20000 Hz Compliance [Cms] 27 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 5.6 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 87.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.15 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.8 Ω Minimum impedance [Zmin] 15.0 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 130 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter R3004/602010 Key Features: T-S Parameters: 420 Hz 1\" Ring Dome Diaphragm Resonance frequency [fs] 2.57 Patented Phase Plug Design Mechanical Q factor [Qms] 1.03 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.74 Sound Transparant Protective Grill Total Q factor [Qts] 1.7 Tm Large Non Resonant Alu Rear Chamber Force factor [Bl] 0.36 kg/s Die Cast Housing & Face Plate Mechanical resistance [Rms] 0.35 g Recommendations (please see Tech Note): Moving mass [Mms] 0.41 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 27 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 5.6 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.02 l Equivalent volume [Vas] 87.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.2 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.8 Ω Minimum impedance [Zmin] 10.5 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 130 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 26 mm Dome Tweeter R3004/662000 Key Features: T-S Parameters: 520 Hz 1\" Ring Dome Diaphragm Resonance frequency [fs] 3.27 Patented Phase Plug Design Mechanical Q factor [Qms] 0.56 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.48 AirCirc Motor Design w. 6 Neo magnets Total Q factor [Qts] 2.3 Tm Diffraction Damping Rubber Front Force factor [Bl] 0.30 kg/s Die Cast Rubber Painted Alu Face Plate Mechanical resistance [Rms] 0.3 g Recommendations (please see Tech Note): Moving mass [Mms] 0.31 mm/N Operating frequency range: 2500-20000 Hz Compliance [Cms] 27 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 5.6 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 90.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.3 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.9 Ω Minimum impedance [Zmin] 20.6 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.03 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 90 W Long-term max power (IEC 18.2) 150 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 12 cm Midrange 12MU/4731T00 Key Features: T-S Parameters: 64 Hz Under-Hung Neodymium Motor Design Resonance frequency [fs] 3.64 Patented Symmetrical Drive (SD-3) Mechanical Q factor [Qms] 0.26 One Piece Cone-Dust Cap Electrical Q factor [Qes] 0.24 Low-Loss Linear Suspension Total Q factor [Qts] 5.1 Tm Very Wide Frequency Response 100-10KHz Force factor [Bl] 0.60 kg/s High Output 90dB @ 2,83V Mechanical resistance [Rms] 5.4 g Recommendations (please see Tech Note): Moving mass [Mms] 1.15 mm/N Operating frequency range: 100-10000 Hz Compliance [Cms] 86 mm Cabinet volume - closed box: Vbox=0.9 ltr, f(-3dB)=172 Hz Effective diaph. diameter [D] 58 cm² Cabinet volume - vented box: Vbox=1.5 ltr, fb=99 Hz, f(-3dB)=119 Hz Effective piston area [Sd] 5.4 l Equivalent volume [Vas] 90 dB Sensitivity (2,83V/1m) Mechanical Data: 32 mm Voice coil diameter 6 mm Voice coil height 4 Voice coil layers 13 mm Gap height ± 3.5 mm Linear excursion ± 10 mm Max mech. excursion 0.8 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 4.3 Ω Minimum impedance [Zmin] 46.5 Ω Maximum impedance [Zo] 3.1 Ω DC resistance [Re] 0.11 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 80 W Long-term max power (IEC 18.2) 150 W X-over: 2. order HP Butterworth, 200 Hz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 12 cm Midrange 12MU/8731T00 Key Features: T-S Parameters: 66 Hz Under-Hung Neodymium Motor Design Resonance frequency [fs] 3.63 Patented Symmetrical Drive (SD-3) Mechanical Q factor [Qms] 0.31 One Piece Cone-Dust Cap Electrical Q factor [Qes] 0.29 Low-Loss Linear Suspension Total Q factor [Qts] 6.1 Tm Very Wide Frequency Response 100-10KHz Force factor [Bl] 0.54 kg/s High Output 87dB @ 2,83V Mechanical resistance [Rms] 4.7 g Recommendations (please see Tech Note): Moving mass [Mms] 1.24 mm/N Operating frequency range: 100-10000 Hz Compliance [Cms] 86 mm Cabinet volume - closed box: Vbox=1.3 ltr, f(-3dB)=153 Hz Effective diaph. diameter [D] 58 cm² Cabinet volume - vented box: Vbox=2.3 ltr, fb=88 Hz, f(-3dB)=99 Hz Effective piston area [Sd] 5.8 l Equivalent volume [Vas] 87 dB Sensitivity (2,83V/1m) Mechanical Data: 32 mm Voice coil diameter 6.2 mm Voice coil height 4 Voice coil layers 13 mm Gap height ± 3.4 mm Linear excursion ± 11 mm Max mech. excursion 0.8 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 8Ω Nominal impedance [Zn] 7.7 Ω Minimum impedance [Zmin] 75.0 Ω Maximum impedance [Zo] 5.9 Ω DC resistance [Re] 0.13 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 80 W Long-term max power (IEC 18.2) 150 W X-over: 2. order HP Butterworth, 200 Hz www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 15 cm Midwoofer 15WU/4741T00 Key Features: T-S Parameters: 34 Hz Under-Hung Neodymium Motor Design Resonance frequency [fs] 3.47 Patented Symmetrical Drive (SD-3) Mechanical Q factor [Qms] 0.25 Patented Sandwich Paper Cone Electrical Q factor [Qes] 0.23 Exceptionally Long Linear Excursion Total Q factor [Qts] 6 Tm Low-loss linear suspension Force factor [Bl] 0.80 kg/s Patented Design Mechanical resistance [Rms] 13 g Recommendations (please see Tech Note): Moving mass [Mms] 1.69 mm/N Operating frequency range: fs-5000 Hz Compliance [Cms] 108 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 92 cm² Cabinet volume - vented box: Vbox=4.5 ltr, fb=55 Hz, f(-3dB)=65 Hz Effective piston area [Sd] 20.0 l Equivalent volume [Vas] 86 dB Sensitivity (2,83V/1m) 42 mm Mechanical Data: 8 mm Voice coil diameter 4 Voice coil height 20 mm Voice coil layers ± 9 mm Gap height ± 13 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 4Ω 4.6 Ω Electrical Data: 47.6 Ω Nominal impedance [Zn] 3.2 Ω Minimum impedance [Zmin] 0.5 mH Maximum impedance [Zo] DC resistance [Re] 80 W Voice coil inductance [Le] 150 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 15 cm Midwoofer 15WU/8741T00 Key Features: T-S Parameters: 35 Hz Under-Hung Neodymium Motor Design Resonance frequency [fs] 3.37 Patented Symmetrical Drive (SD-3) Mechanical Q factor [Qms] 0.28 Patented Sandwich Paper Cone Electrical Q factor [Qes] 0.26 Exceptionally Long Linear Excursion Total Q factor [Qts] 7.5 Tm Low-loss linear suspension Force factor [Bl] 0.80 kg/s Patented Design Mechanical resistance [Rms] 12.3 g Recommendations (please see Tech Note): Moving mass [Mms] 1.68 mm/N Operating frequency range: fs-5000 Hz Compliance [Cms] 108 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 92 cm² Cabinet volume - vented box: Vbox=5.5 ltr, fb=52 Hz, f(-3dB)=61 Hz Effective piston area [Sd] 19.9 l Equivalent volume [Vas] 83.5 dB Sensitivity (2,83V/1m) 42 mm Mechanical Data: 8 mm Voice coil diameter 4 Voice coil height 20 mm Voice coil layers ± 9 mm Gap height ± 13 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 8Ω 7.9 Ω Electrical Data: 76.9 Ω Nominal impedance [Zn] 5.9 Ω Minimum impedance [Zmin] 0.41 mH Maximum impedance [Zo] DC resistance [Re] 80 W Voice coil inductance [Le] 150 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 18 cm Midwoofer 18WU/4741T00 Key Features: T-S Parameters: 34 Hz Under-Hung Neodymium Motor Design Resonance frequency [fs] 3.76 Patented Symmetrical Drive (SD-3) Mechanical Q factor [Qms] 0.39 Patented Sandwich Paper Cone Electrical Q factor [Qes] 0.36 Exceptionally Long Linear Excursion Total Q factor [Qts] 5.9 Tm Low-Loss linear suspension Force factor [Bl] 1.1 kg/s Patented Design Mechanical resistance [Rms] 19.1 g Recommendations (please see Tech Note): Moving mass [Mms] 1.2 mm/N Operating frequency range: fs-4000 Hz Compliance [Cms] 140 mm Cabinet volume - closed box: Vbox=17 ltr, f(-3dB)=61 Hz Effective diaph. diameter [D] 154 cm² Cabinet volume - vented box: Vbox=35 ltr, fb=35 Hz, f(-3dB)=35 Hz Effective piston area [Sd] 38.4 l Equivalent volume [Vas] 87.5 dB Sensitivity (2,83V/1m) 42 mm Mechanical Data: 8 mm Voice coil diameter 4 Voice coil height 20 mm Voice coil layers ± 9 mm Gap height ± 16 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 4Ω 4.6 Ω Electrical Data: 31.9 Ω Nominal impedance [Zn] 3.3 Ω Minimum impedance [Zmin] 0.4 mH Maximum impedance [Zo] DC resistance [Re] 70 W Voice coil inductance [Le] 150 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 18 cm Midwoofer 18WU/8741T00 Key Features: T-S Parameters: 35 Hz Under-Hung Neodymium Motor Design Resonance frequency [fs] 3.78 Patented Symmetrical Drive (SD-3) Mechanical Q factor [Qms] 0.44 Patented Sandwich Paper Cone Electrical Q factor [Qes] 0.39 Exceptionally Long Linear Excursion Total Q factor [Qts] 7.3 Tm Low-Loss linear suspension Force factor [Bl] 1.1 kg/s Patented Design Mechanical resistance [Rms] 18.5 g Recommendations (please see Tech Note): Moving mass [Mms] 1.1 mm/N Operating frequency range: fs-4000 Hz Compliance [Cms] 140 mm Cabinet volume - closed box: Vbox=19 ltr, f(-3dB)=60 Hz Effective diaph. diameter [D] 154 cm² Cabinet volume - vented box: Vbox=39 ltr, fb=34 Hz, f(-3dB)=34 Hz Effective piston area [Sd] 37.1 l Equivalent volume [Vas] 85.5 dB Sensitivity (2,83V/1m) 42 mm Mechanical Data: 8 mm Voice coil diameter 4 Voice coil height 20 mm Voice coil layers ± 9 mm Gap height ± 16 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 8Ω 7.3 Ω Electrical Data: 51.3 Ω Nominal impedance [Zn] 5.8 Ω Minimum impedance [Zmin] 0.6 mH Maximum impedance [Zo] DC resistance [Re] 70 W Voice coil inductance [Le] 150 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 18 cm Woofer 18WU/4747T00 Key Features: T-S Parameters: 36 Hz Under-Hung Neodymium Motor Design Resonance frequency [fs] 3.72 Patented Symmetrical Drive (SD-3) Mechanical Q factor [Qms] 0.39 Black Anodized Alu. Cone Electrical Q factor [Qes] 0.35 Exceptionally Long Linear Excursion Total Q factor [Qts] 5.9 Tm Low-Loss linear suspension Force factor [Bl] 1.1 kg/s Patented Design Mechanical resistance [Rms] 18.1 g Recommendations (please see Tech Note): Moving mass [Mms] 1.1 mm/N Operating frequency range: fs-4000 Hz Compliance [Cms] 140 mm Cabinet volume - closed box: Vbox=15 ltr, f(-3dB)=67 Hz Effective diaph. diameter [D] 154 cm² Cabinet volume - vented box: Vbox=30 ltr, fb=38 Hz, f(-3dB)=39 Hz Effective piston area [Sd] 36 l Equivalent volume [Vas] 87.5 dB Sensitivity (2,83V/1m) 42 mm Mechanical Data: 8 mm Voice coil diameter 4 Voice coil height 20 mm Voice coil layers ± 9 mm Gap height ± 16 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 4Ω 4.5 Ω Electrical Data: 32.6 Ω Nominal impedance [Zn] 3.3 Ω Minimum impedance [Zmin] 0.4 mH Maximum impedance [Zo] DC resistance [Re] 70 W Voice coil inductance [Le] 150 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Illuminator 18 cm Woofer 18WU/8747T00 Key Features: T-S Parameters: 36 Hz Under-Hung Neodymium Motor Design Resonance frequency [fs] 3.72 Patented Symmetrical Drive (SD-3) Mechanical Q factor [Qms] 0.43 Black Anodized Alu. Cone Electrical Q factor [Qes] 0.38 Exceptionally Long Linear Excursion Total Q factor [Qts] 7.4 Tm Low-Loss linear suspension Force factor [Bl] 1.1 kg/s Patented Design Mechanical resistance [Rms] 18 g Recommendations (please see Tech Note): Moving mass [Mms] 1.1 mm/N Operating frequency range: fs-4000 Hz Compliance [Cms] 140 mm Cabinet volume - closed box: Vbox=17 ltr, f(-3dB)=64 Hz Effective diaph. diameter [D] 154 cm² Cabinet volume - vented box: Vbox=35 ltr, fb=36 Hz, f(-3dB)=37 Hz Effective piston area [Sd] 36.2 l Equivalent volume [Vas] 85.5 dB Sensitivity (2,83V/1m) 42 mm Mechanical Data: 8 mm Voice coil diameter 4 Voice coil height 20 mm Voice coil layers ± 9 mm Gap height ± 16 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 8Ω 7.3 Ω Electrical Data: 51.7 Ω Nominal impedance [Zn] 5.8 Ω Minimum impedance [Zmin] 0.6 mH Maximum impedance [Zo] DC resistance [Re] 70 W Voice coil inductance [Le] 150 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator Products in our Revelator family have been an industry standard in high end loudspeaker systems for many years. The key feature being the filled cone slits for the midwoofers and midranges which reproduce music at a dynamic level and clarity that at the time of introduction was unparalleled in the market. The tweeters are predominately designed with a large roll surround, powerful ring Neodymium magnets and optimized airflow systems. The latest addition to the Revelator family is a 20mm dome tweeter. The large woofers and subwoofers are relatively new additions too and represent an increase in cone excursion and dynamic capability with impressive transient behavior. Within the wide Revelator range you will find everything you need when it comes to high end audio transducers, whether you need drivers for a small 2-way system or a giant multi-way loudspeaker. The Revelator family can supply it all with superb performance and quality.

Revelator OVERVIEW Tweeters Size fs Re Qms Qes Qts Sens. VAS Bl Mms Xmax ± VC dia. [Inch.] [Hz] [Ω] [dB] [l] [Tm] [g] [mm] [mm] D2104/712000 D2904/710002 0.75 500 2.8 2.3 0.48 0.40 92 0.01 2.0 0.22 0.5 19.3 D2904/710003 D2905/990000 1 520 3 3.50 0.50 0.44 94.5 0.02 2.8 0.4 0.25 26 D2908/714000 R2904/700000 1 520 3 3.50 0.50 0.44 94.5 0.02 2.8 0.4 0.25 26 R2904/700005 R2904/700009 1 500 4.7 4.83 0.72 0.63 91 0.02 3.5 0.45 0.4 28 Midranges/Fullranges 1 534 5.7 7.3 0.50 0.47 92 0.02 3.6 0.33 0.2 26 12M/4631G00 1 520 3 2.90 0.38 0.33 94.5 0.01 2.8 0.3 0.25 26 15M/4531K00 15M/8631G00 1 520 3 2.90 0.38 0.33 94.5 0.01 2.8 0.3 0.25 26 18M/4631T00 18M/8631T00 1 520 3 2.90 0.38 0.33 94.5 0.01 2.8 0.3 0.25 26 Midwoofers Size fs Re Qms Qes Qts Sens. VAS Bl Mms Xmax ± VC dia. [Inch.] [Hz] [Ω] [dB] [l] [Tm] [g] [mm] [mm] 15W/4531G00 15W/8530K00 4 75 3.2 5.57 0.35 0.33 89 2.3 5.3 6.5 3 38 15W/8530K01 15W/8531K00 5.5 42 3.5 4.8 0.28 0.27 89.5 16 6 11 3 38 18W/4531G00 18W/4531G01 5.25 42 5.9 5.8 0.37 0.35 87 16.2 6.8 10.9 3 38 18W/8531G00 6.5 65 3.5 5.65 0.67 0.60 92 14.0 5.6 14.3 3 38 Woofers 6.5 65 6.0 5.24 0.82 0.71 89 14 6.5 14.2 3 38 22W/4851T00 22W/8851T00 Size fs Re Qms Qes Qts Sens. VAS Bl Mms Xmax ± VC dia. 22W/8857T00 [Inch.] [Hz] [Ω] [dB] [l] [Tm] [g] [mm] [mm] 26W/4867T00 40 3.4 4.60 0.34 0.32 87 15.8 5.7 13 6.5 38 26W/8861T00 5.5 39 5.85 5 0.43 0.39 86 16 6.6 13 6.5 38 26W/8867T00 5.5 38 5.9 0.55 0.5 84.5 17 5.8 13 6.5 38 28W/4878T01 5.5 39 5.8 5.8 0.42 0.38 86 16.7 6.6 12.8 6.5 38 28W/8878T01 5.5 33 3.4 4.9 0.38 0.35 90 41.9 5.7 17.5 6.5 38 32W/4878T01 6.5 34 3.5 5.20 0.38 0.35 89 45.6 5.7 16.9 6.5 38 32W/4878T11 6.5 28 5.8 4.90 0.39 0.36 87 58.2 6.8 17.5 6.5 38 32W/8878T01 6.5 5.10 32W/8878T11 Size fs Re Qms Qes Qts Sens. VAS Bl Mms Xmax ± VC dia. Subwoofers [Inch.] [Hz] [Ω] [dB] [l] [Tm] [g] [mm] [mm] 23W/4557T00 8 21 3.7 5.20 0.23 0.22 89 126 8.2 32.5 9 50 23W/4557T02 28W/4878T00 8 21 6.2 5.10 0.26 0.25 88 126 9.9 31 9 50 32W/4878T00 8 23 6.2 4.90 0.32 0.30 86 87.7 10.1 37 9 50 10 18 3.7 5.80 0.31 0.29 89 220 8.3 51 9 50 10 19 6.2 5.20 0.33 0.31 88.5 231 9.9 43.5 9 50 10 19 5.8 4.50 0.31 0.29 87 176 11.2 57 9 50 11 23 3.1 6.21 0.27 0.26 91 104 12 86 7 75 11 22 6.3 5.81 0.33 0.31 88.5 116 14.9 84 7.5 75 13 23 3.1 6.0 0.30 0.28 92 170 13 112 7 75 13 24 3.1 4.25 0.22 0.21 95 185 14 93 7 75 13 19 6.1 5.69 0.35 0.33 89 234 15.6 114.8 7.5 75 13 21 6.1 3.8 0.28 0.26 91.5 235 16.5 95.5 7.5 75 Size fs Re Qms Qes Qts Sens. VAS Bl Mms Xmax ± VC dia. [Inch.] [Hz] [Ω] [dB] [l] [Tm] [g] [mm] [mm] 21 3.45 4.80 0.52 0.47 82 45.0 9.3 101 13 50 9 21 3.45 4.80 0.52 0.47 82 45.0 9.3 101 13 50 9 18 3.1 5.6 0.32 0.3 88 127 11.2 114.5 14 75 11 18 3.1 0.33 0.32 90 203.9 12.5 150 14 75 13 7

Revelator 19 mm Dome Tweeter D2104/712000 Key Features: T-S Parameters: 500 Hz Patented Symmetrical Drive (SD-2) motor Resonance frequency [fs] 2.3 Neodymium ring magnet system with double vent. Mechanical Q factor [Qms] 0.48 High frequency extension beyond 40kHz Electrical Q factor [Qes] 0.40 Coated textile diaphragm w. large roll Surround Total Q factor [Qts] 2.0 Tm Back chamber with high consistency felt pads Force factor [Bl] 0.3 kg/s Anodized Machined Alu Face Plate Mechanical resistance [Rms] 0.22 g Recommendations (please see Tech Note): Moving mass [Mms] 0.46 mm/N Operating frequency range: 3500-30000 Hz Compliance [Cms] 24 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 4.5 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 92 dB Sensitivity (2,83V/1m) Mechanical Data: 19.3 mm Voice coil diameter 1.8 mm Voice coil height 2 Voice coil layers 4 mm Gap height ± 0.5 mm Linear excursion ± 1.5 mm Max mech. excursion 0.33 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.5 Ω Minimum impedance [Zmin] 11.3 Ω Maximum impedance [Zo] 2.8 Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 50 W Long-term max power (IEC 18.2) 120 W X-over: 2. order HP Butterworth, 4 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 26 mm Dome Tweeter D2904/710002 Key Features: T-S Parameters: 520 Hz 1\" Coated Textile Diaphragm Resonance frequency [fs] 3.50 Large Roll Surround f. Wide Dispersion Mechanical Q factor [Qms] 0.50 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.44 Large Ring Neo Magnet f. High Output Total Q factor [Qts] 2.8 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.37 kg/s Silver Anodized Machined Alu Face Plate Mechanical resistance [Rms] 0.4 g Recommendations (please see Tech Note): Moving mass [Mms] 0.23 mm/N Operating frequency range: 2500-25000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.02 l Equivalent volume [Vas] 94.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.25 mm Linear excursion ± 1.6 mm Max mech. excursion 0.4 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.7 Ω Minimum impedance [Zmin] 24.0 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.01 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 90 W Long-term max power (IEC 18.2) 150 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 26 mm Dome Tweeter D2904/710003 Key Features: T-S Parameters: 520 Hz 1\" Coated Textile Diaphragm Resonance frequency [fs] 3.50 Large Roll Surround f. Wide Dispersion Mechanical Q factor [Qms] 0.50 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.44 Large Ring Neo Magnet f. High Output Total Q factor [Qts] 2.8 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.37 kg/s Black Anodized Machined Alu Face Plate Mechanical resistance [Rms] 0.4 g Recommendations (please see Tech Note): Moving mass [Mms] 0.23 mm/N Operating frequency range: 2500-25000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.02 l Equivalent volume [Vas] 94.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.25 mm Linear excursion ± 1.6 mm Max mech. excursion 0.4 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.7 Ω Minimum impedance [Zmin] 24.0 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.01 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 90 W Long-term max power (IEC 18.2) 150 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 28 mm Dome Tweeter D2905/990000 Key Features: T-S Parameters: 500 Hz Excellent Sound Reproduction Resonance frequency [fs] 4.83 1\" Textile Dome Diaphragm Mechanical Q factor [Qms] 0.72 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.63 Wide Surround Textile Diaphragm Total Q factor [Qts] 3.5 Tm Large Wave Guide Front Force factor [Bl] 0.29 kg/s Black Anodized Mashined Alu Face Plate Mechanical resistance [Rms] 0.45 g Recommendations (please see Tech Note): Moving mass [Mms] 0.23 mm/N Operating frequency range: 2800-25000 Hz Compliance [Cms] 33 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 8.5 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.02 l Equivalent volume [Vas] 91 dB Sensitivity (2,83V/1m) Mechanical Data: 28 mm Voice coil diameter 3.3 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.4 mm Linear excursion ± 1.5 mm Max mech. excursion 0.8 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 6Ω Nominal impedance [Zn] 5.6 Ω Minimum impedance [Zmin] 36.1 Ω Maximum impedance [Zo] 4.7 Ω DC resistance [Re] 0.01 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 225 W Long-term max power (IEC 18.2) 430 W X-over: 2. order HP Butterworth, 2.8 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 26 mm Dome Tweeter D2908/714000 Key Features: T-S Parameters: 534 Hz Beryllium Diaphragm (99% Pure Be) Resonance frequency [fs] 7.3 Rear Mount Magnet System Mechanical Q factor [Qms] 0.50 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.47 Titanium Voice Coil Former Total Q factor [Qts] 3.6 Tm Black Anodized Ø120mm Machined Alu Faceplate Force factor [Bl] 0.15 kg/s Non Resonant Aluminium Rear Chamber Mechanical resistance [Rms] 0.33 g Recommendations (please see Tech Note): Moving mass [Mms] 0.26 mm/N Operating frequency range: 2500-40000 Hz Compliance [Cms] 30 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 7 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.02 l Equivalent volume [Vas] 92 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.1 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.2 mm Linear excursion ± 1.6 mm Max mech. excursion 0.5 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 8Ω Nominal impedance [Zn] 6.5 Ω Minimum impedance [Zmin] 90 Ω Maximum impedance [Zo] 5.7 Ω DC resistance [Re] 0.02 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 160 W Long-term max power (IEC 18.2) 200 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 26 mm Dome Tweeter R2904/700000 Key Features: T-S Parameters: 520 Hz 1\" Ring Dome Diaphragm Resonance frequency [fs] 2.90 Patented Phase Plug Design Mechanical Q factor [Qms] 0.38 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.33 Large Ring Neo Magnet f. High Output Total Q factor [Qts] 2.8 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.34 kg/s Silver Anodized Mashined Alu Face Plate Mechanical resistance [Rms] 0.3 g Recommendations (please see Tech Note): Moving mass [Mms] 0.31 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 27 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 5.6 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 94.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.25 mm Linear excursion ± 1.6 mm Max mech. excursion 0.4 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.7 Ω Minimum impedance [Zmin] 26.2 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.01 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 160 W Long-term max power (IEC 18.2) 210 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 26 mm Dome Tweeter R2904/700005 Key Features: T-S Parameters: 520 Hz 1\" Ring Dome Diaphragm Resonance frequency [fs] 2.90 Patented Phase Plug Design Mechanical Q factor [Qms] 0.38 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.33 Large Ring Neo Magnet f. High Output Total Q factor [Qts] 2.8 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.34 kg/s Black Anodized Machined Alu Face Plate Mechanical resistance [Rms] 0.3 g Recommendations (please see Tech Note): Moving mass [Mms] 0.31 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 27 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 5.6 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 94.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.25 mm Linear excursion ± 1.6 mm Max mech. excursion 0.4 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.7 Ω Minimum impedance [Zmin] 26.2 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.01 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 160 W Long-term max power (IEC 18.2) 210 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 26 mm Dome Tweeter R2904/700009 Key Features: T-S Parameters: 520 Hz 1\" Ring Dome Diaphragm Resonance frequency [fs] 2.90 Patented Phase Plug Design Mechanical Q factor [Qms] 0.38 Patented Symmetrical Drive (SD-2) motor Electrical Q factor [Qes] 0.33 Large Ring Neo Magnet f. High Output Total Q factor [Qts] 2.8 Tm Non Resonant Alu Rear Chamber Force factor [Bl] 0.34 kg/s Black Anodized Machined Alu Face Plate Mechanical resistance [Rms] 0.3 g Recommendations (please see Tech Note): Moving mass [Mms] 0.31 mm/N Operating frequency range: 2500-30000 Hz Compliance [Cms] 27 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 5.6 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 0.01 l Equivalent volume [Vas] 94.5 dB Sensitivity (2,83V/1m) Mechanical Data: 26 mm Voice coil diameter 2.0 mm Voice coil height 2 Voice coil layers 2.5 mm Gap height ± 0.25 mm Linear excursion ± 1.6 mm Max mech. excursion 0.4 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.7 Ω Minimum impedance [Zmin] 26.2 Ω Maximum impedance [Zo] 3Ω DC resistance [Re] 0.01 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 160 W Long-term max power (IEC 18.2) 210 W X-over: 2. order HP Butterworth, 2.5 kHz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 12 cm Midrange 12M/4631G00 Key Features: T-S Parameters: 75 Hz Excellent Midrange reproduction Resonance frequency [fs] 5.57 Sliced Cone (Controls Cone Breakups) Mechanical Q factor [Qms] 0.35 Low-Loss Linear Suspension Electrical Q factor [Qes] 0.33 High Output 89dB @ 2,83V Total Q factor [Qts] 5.3 Tm Compact Neodymium Magnet System Force factor [Bl] 0.55 kg/s Recommendations (please see Tech Note): Mechanical resistance [Rms] 6.5 g Operating frequency range: 85-10000 Hz Moving mass [Mms] 0.69 mm/N Cabinet volume - closed box: Vbox=0.8 ltr, f(-3dB)=147 Hz Compliance [Cms] 79 mm Cabinet volume - vented box: Vbox=1.6 ltr, fb=84 Hz, f(-3dB)=88 Hz Effective diaph. diameter [D] 49 cm² Effective piston area [Sd] 2.3 l Equivalent volume [Vas] 89 dB Sensitivity (2,83V/1m) Mechanical Data: 38 mm Voice coil diameter 10 mm Voice coil height 2 Voice coil layers 4 mm Gap height ± 3 mm Linear excursion ± 7 mm Max mech. excursion 0.6 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.8 Ω Minimum impedance [Zmin] 54.1 Ω Maximum impedance [Zo] 3.2 Ω DC resistance [Re] 0.22 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 40 W Long-term max power (IEC 18.2) 70 W X-over: 2. order HP Butterworth, 200 Hz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 15 cm Midrange 15M/4531K00 Key Features: T-S Parameters: 42 Hz Excellent Midrange Reproduction Resonance frequency [fs] 4.8 Patented Symmetrical Drive motor design Mechanical Q factor [Qms] 0.28 Sliced Cone (Controls Cone Breakups) Electrical Q factor [Qes] 0.27 Low-loss linear suspension Total Q factor [Qts] 6 Tm High Output 89.5dB @ 2,83V Force factor [Bl] 0.6 kg/s Die cast Alu Chassis vented below spider Mechanical resistance [Rms] 11 g Recommendations (please see Tech Note): Moving mass [Mms] 1.3 mm/N Operating frequency range: 65-7000 Hz Compliance [Cms] 110 mm Cabinet volume - closed box: Vbox=3.3 ltr, f(-3dB)=101 Hz Effective diaph. diameter [D] 95 cm² Cabinet volume - vented box: Vbox=6 ltr, fb=58 Hz, f(-3dB)=64 Hz Effective piston area [Sd] 16 l Equivalent volume [Vas] 89.5 dB Sensitivity (2,83V/1m) 38 mm Mechanical Data: 11 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 3 mm Gap height ± 8 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 4Ω 4.1 Ω Electrical Data: 53 Ω Nominal impedance [Zn] 3.5 Ω Minimum impedance [Zmin] 0.16 mH Maximum impedance [Zo] DC resistance [Re] 50 W Voice coil inductance [Le] 150 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 15 cm Midrange 15M/8631G00 Key Features: T-S Parameters: 42 Hz Excellent Midrange Reproduction Resonance frequency [fs] 5.8 Patented Symmetrical Drive motor design Mechanical Q factor [Qms] 0.37 Sliced Cone (Controls Cone Breakups) Electrical Q factor [Qes] 0.35 Low-loss linear suspension Total Q factor [Qts] 6.8 Tm Die cast Alu Chassis vented below spider Force factor [Bl] 0.5 kg/s Large ferrite magnet system Mechanical resistance [Rms] 10.9 g Recommendations (please see Tech Note): Moving mass [Mms] 1.28 mm/N Operating frequency range: 50-7000 Hz Compliance [Cms] 110 mm Cabinet volume - closed box: Vbox=6 ltr, f(-3dB)=80 Hz Effective diaph. diameter [D] 95 cm² Cabinet volume - vented box: Vbox=12 ltr, fb=46 Hz, f(-3dB)=48 Hz Effective piston area [Sd] 16.2 l Equivalent volume [Vas] 87 dB Sensitivity (2,83V/1m) 38 mm Mechanical Data: 11 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 3 mm Gap height ± 8 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 8Ω 6.9 Ω Electrical Data: 96 Ω Nominal impedance [Zn] 5.9 Ω Minimum impedance [Zmin] 0.22 mH Maximum impedance [Zo] DC resistance [Re] 50 W Voice coil inductance [Le] 110 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 18 cm Midrange 18M/4631T00 Key Features: T-S Parameters: 65 Hz Patented Symmetrical Drive motor design Resonance frequency [fs] 5.65 Sliced Cone (Control Cone Breakups) Mechanical Q factor [Qms] 0.67 Low-loss Linear Suspension Electrical Q factor [Qes] 0.60 High Sensitivity 92dB @ 2,83V Total Q factor [Qts] 5.6 Tm Coated Foam Surround Force factor [Bl] 1.03 kg/s Rigid Titanium Voice Coil Former Mechanical resistance [Rms] 14.3 g Recommendations (please see Tech Note): Moving mass [Mms] 0.42 mm/N Operating frequency range: 70-6000 Hz Compliance [Cms] 138 mm Cabinet volume - closed box: Vbox=3 ltr, f(-3dB)=154 Hz Effective diaph. diameter [D] 154 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 14.0 l Equivalent volume [Vas] 92 dB Sensitivity (2,83V/1m) Mechanical Data: 38 mm Voice coil diameter 11 mm Voice coil height 2 Voice coil layers 5 mm Gap height ± 3 mm Linear excursion ± 14.5 mm Max mech. excursion 1.7 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 4Ω Nominal impedance [Zn] 3.9 Ω Minimum impedance [Zmin] 29 Ω Maximum impedance [Zo] 3.5 Ω DC resistance [Re] 0.16 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 120 W Long-term max power (IEC 18.2) 250 W X-over: 2. order HP Butterworth, 100Hz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 18 cm Midrange 18M/8631T00 Key Features: T-S Parameters: 65 Hz Patented Symmetrical Drive motor design Resonance frequency [fs] 5.24 Sliced Cone (Control Cone Breakups) Mechanical Q factor [Qms] 0.82 Low-loss Linear Suspension Electrical Q factor [Qes] 0.71 High Sensitivity 89dB @ 2,83V Total Q factor [Qts] 6.5 Tm Coated Foam Surround Force factor [Bl] 1.11 kg/s Rigid Titanium Voice Coil Former Mechanical resistance [Rms] 14.2 g Recommendations (please see Tech Note): Moving mass [Mms] 0.42 mm/N Operating frequency range: 70-6000 Hz Compliance [Cms] 138 mm Cabinet volume - closed box: Vbox=3 ltr, f(-3dB)=154 Hz Effective diaph. diameter [D] 154 cm² Cabinet volume - vented box: N.a. Effective piston area [Sd] 14 l Equivalent volume [Vas] 89 dB Sensitivity (2,83V/1m) Mechanical Data: 38 mm Voice coil diameter 10.9 mm Voice coil height 2 Voice coil layers 5 mm Gap height ± 3 mm Linear excursion ± 14.5 mm Max mech. excursion 1.7 kg Unit weight -l Cabinet Displacement Volume Electrical Data: 8Ω Nominal impedance [Zn] 6.3 Ω Minimum impedance [Zmin] 39.7 Ω Maximum impedance [Zo] 6.0 Ω DC resistance [Re] 0.22 mH Voice coil inductance [Le] Power Handling: 100h RMS noise test (IEC 18.4) 120 W Long-term max power (IEC 18.2) 250 W X-over: 2. order HP Butterworth, 100 Hz www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 15 cm Midwoofer 15W/4531G00 Key Features: T-S Parameters: 40 Hz Patented Symmetrical Drive motor design Resonance frequency [fs] 4.60 Sliced Cone (Controls Cone Breakups) Mechanical Q factor [Qms] 0.34 Low-Loss linear suspension Electrical Q factor [Qes] 0.32 Low Damping SBR Rubber Surround Total Q factor [Qts] 5.7 Tm Die cast Alu Chassis vented below spider Force factor [Bl] 0.70 kg/s Large Ferrite Magnet System Mechanical resistance [Rms] 13 g Recommendations (please see Tech Note): Moving mass [Mms] 1.25 mm/N Operating frequency range: fs-6000 Hz Compliance [Cms] 110 mm Cabinet volume - closed box: N.a. Effective diaph. diameter [D] 95 cm² Cabinet volume - vented box: Vbox=10 ltr, fb=47 Hz, f(-3dB)=49 Hz Effective piston area [Sd] 15.8 l Equivalent volume [Vas] 87 dB Sensitivity (2,83V/1m) 38 mm Mechanical Data: 17.5 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 6.5 mm Gap height ± 9 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 4Ω 4.4 Ω Electrical Data: 4.2 Ω Nominal impedance [Zn] 3.4 Ω Minimum impedance [Zmin] 0.25 mH Maximum impedance [Zo] DC resistance [Re] 60 W Voice coil inductance [Le] 180 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 15 cm Midwoofer 15W/8530K00 Key Features: T-S Parameters: 39 Hz Patented Symmetrical Drive Motor Design Resonance frequency [fs] 5 Sliced Cone (Controls Cone Breakups) Mechanical Q factor [Qms] 0.43 Low-Loss linear suspension Electrical Q factor [Qes] 0.39 Low Damping SBR Rubber Surround Total Q factor [Qts] 6.6 Tm Coated Paper Cone Force factor [Bl] 0.64 kg/s Large Ferrite Magnet System Mechanical resistance [Rms] 13 g Recommendations (please see Tech Note): Moving mass [Mms] 1.27 mm/N Operating frequency range: fs-6000 Hz Compliance [Cms] 110 mm Cabinet volume - closed box: Vbox=8 ltr, f(-3dB)=67 Hz Effective diaph. diameter [D] 95 cm² Cabinet volume - vented box: Vbox=17 ltr, fb=38 Hz, f(-3dB)=38 Hz Effective piston area [Sd] 16 l Equivalent volume [Vas] 86 dB Sensitivity (2,83V/1m) 38 mm Mechanical Data: 18 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 6.5 mm Gap height ± 9 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 8Ω 6.7 Ω Electrical Data: 57 Ω Nominal impedance [Zn] 5.85 Ω Minimum impedance [Zmin] 0.3 mH Maximum impedance [Zo] DC resistance [Re] 60 W Voice coil inductance [Le] 110 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 15 cm Midwoofer 15W/8530K01 Key Features: T-S Parameters: 38 Hz Patented Symmetrical Drive Motor Design Resonance frequency [fs] 5.8 Sliced Cone (Controls Cone Breakups) Mechanical Q factor [Qms] 0.55 Coated Paper Cone Electrical Q factor [Qes] 0.5 Low-Loss linear suspension Total Q factor [Qts] 5.8 Tm Low Damping SBR Rubber Surround Force factor [Bl] 0.54 kg/s Die cast Alu Chassis vented below spider Mechanical resistance [Rms] 13 g Recommendations (please see Tech Note): Moving mass [Mms] 1.33 mm/N Operating frequency range: fs-6000 Hz Compliance [Cms] 110 mm Cabinet volume - closed box: Vbox=21 ltr, f(-3dB)=51 Hz Effective diaph. diameter [D] 95 cm² Cabinet volume - vented box: Vbox=41 ltr, fb=29 Hz, f(-3dB)=26 Hz Effective piston area [Sd] 17 l Equivalent volume [Vas] 84.5 dB Sensitivity (2,83V/1m) 38 mm Mechanical Data: 18 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 6.5 mm Gap height ± 9 mm Linear excursion 1.2 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 8Ω 6.7 Ω Electrical Data: 50.4 Ω Nominal impedance [Zn] 5.9 Ω Minimum impedance [Zmin] 0.3 mH Maximum impedance [Zo] DC resistance [Re] 60 W Voice coil inductance [Le] 70 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.

Revelator 15 cm Midwoofer 15W/8531K00 Key Features: T-S Parameters: 39 Hz Patented Symmetrical Drive Motor Design Resonance frequency [fs] 4.9 Sliced Cone (Controls Cone Breakups) Mechanical Q factor [Qms] 0.42 Low-Loss linear suspension Electrical Q factor [Qes] 0.38 Low Damping SBR Rubber Surround Total Q factor [Qts] 6.6 Tm Die cast Alu Chassis vented below spider Force factor [Bl] 0.64 kg/s Large Ferrite Magnet System Mechanical resistance [Rms] 12.8 g Recommendations (please see Tech Note): Moving mass [Mms] 1.3 mm/N Operating frequency range: fs-6000 Hz Compliance [Cms] 110 mm Cabinet volume - closed box: Vbox=8 ltr, f(-3dB)=69 Hz Effective diaph. diameter [D] 95 cm² Cabinet volume - vented box: Vbox=17 ltr, fb=39 Hz, f(-3dB)=40 Hz Effective piston area [Sd] 16.7 l Equivalent volume [Vas] 86 dB Sensitivity (2,83V/1m) 38 mm Mechanical Data: 18 mm Voice coil diameter 2 Voice coil height 5 mm Voice coil layers ± 6.5 mm Gap height ± 9 mm Linear excursion 1.7 kg Max mech. excursion -l Unit weight Cabinet Displacement Volume 8Ω 6.7 Ω Electrical Data: 57 Ω Nominal impedance [Zn] 5.8 Ω Minimum impedance [Zmin] 0.29 mH Maximum impedance [Zo] DC resistance [Re] 60 W Voice coil inductance [Le] 110 W Power Handling: 100h RMS noise test (IEC 18.4) Long-term max power (IEC 18.2) X-over: None www.scan-speak.dk Datasheet updated: May 18, 2020.