Venfilter-EN-imprenta-2020 02 07 VERSION 20 digital

Equipments 0 INFORMA- TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS HTMBP-Shallow model with upper air inlet 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 199 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com INFORMA- 200 Fax +34 937 862 493 TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 Metal Housing INFORMA- 90-110 TION Fitting elements 1 Terminal Diffuser for replaceable HEPA/ULPA filters, for PRE- air diffusion in Clean Rooms with turbulent and laminar FILTERS flow. 2 Technical features PAINTINGS BOOTHS Type: Diffuser Terminal unit for ceiling or wall installation for the final filtration of a Clean Room. 3 Construction: Airtight welded electrogalvanized steel, white epoxy paint (RAL 9010) and kiln dried. COMFORT Air intake: At the top (HTMBS) or at the side (HTMBL), circu- PRODUCTS lar, with an attachment neck. Filter attachment: In the lower part, against the smooth fra- 4 me, one single piece and held by attachment devices that exert a continuous and constant pressure. EPA/HEPA For filters: Filters of 90 and 110 mm. in depth. /ULPA Advantages 5 - Smooth coating, facilitates cleaning the diffuser grid. HIGH - Internal centering devices for filters and fixed mountings for the positioning of the filter inside the hou- TEMPERA- sing, preventing the filter from falling. - Easy filter assemble and replacement. TURE INSTALLATION - Design of a rigid construction, allows an easy and fast assembly or installation. 6 - Installation in roof side or superior entrance. - In addition, it is equipped with four squares drilled for its suspension. EQUIP- MENTS 7 MOTORS AND TURBINES 8 Steel plenum. Moutings for filter Probes for integrity testing Diffuser grids: PerfoNomi- ADSOR- retention. and differential pressure nal or ratational, painted TION AND measurement. in white (RAL 9010). DESODO- RIZATION Venfilter 9 Tel +34 937 862 607 Fax +34 937 862 493 [email protected] 201 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- TION References 1 HTMBL-Air intake at the side PRE- Dimensions (mm) For Filters Neck FILTERS BxHxP (mm) inlet Reference A A1 A2 B B1 B2 H (mm) UxP* Stock* HTMBL1212.4 367 264 319 367 264 319 325 305x305x90/110 150 1F 150 1F 2 HTMBL1224.4 672 569 624 367 264 319 325 610x305x90/110 200 1F HTMBL1818.4 519 416 471 519 416 471 375 457x457x90/110 250 1F HTMBL2424.4 672 569 624 672 569 624 425 610x610x90/110 250 1F 250 1F PAINTINGS HTMBL2436.4 977 971 929 672 569 624 425 915x610x90/110 BOOTHS HTMBL2448.4 1282 1179 1234 672 569 624 425 1220x610x90/110 3 HTMBS-Air intake at the top For Filters Neck Dimensions (mm) BxHxP (mm) inlet (mm) COMFORT Reference A A1 A2 B B1 B2 H UxP* Stock* PRODUCTS 150 150 1F 4 HTMBS1212.4 367 264 319 367 264 319 375 305x305x90/110 200 1F HTMBS1224.4 672 569 624 367 264 319 375 610x305x90/110 250 1F EPA/HEPA HTMBS1818.4 519 416 471 519 416 471 425 457x457x90/110 315 1F /ULPA HTMBS2424.4 672 569 624 672 569 624 465 610x610x90/110 315 1F HTMBS2436.4 977 874 929 672 569 624 465 915x610x90/110 1F HTMBS2448.4 1282 1179 1234 672 569 624 465 1220x610x90/110 5 *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- 202 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DESODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 Technical Documentation INFORMA- TION HTMBS-Air intake at the top 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 203 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments [email protected] www.venfilter.com INFORMA- HTMBL-Air intake at the side TION Venfilter 1 Tel +34 937 862 607 204 Fax +34 937 862 493 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 INFORMA- TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 205 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- Plastic Housing TION Fitting Elements 1 Terminal Diffuser for replaceable Laminarven type HEPA/ PRE- ULPA filters for air diffusion in Clean Rooms with turbulent FILTERS and laminar flow. 2 Technical features PAINTINGS Type: Diffuser Terminal unit for ceiling or wall installation for BOOTHS the final filtration of a Clean Room. Construction: Manufactured in Self-Extinguishable Thermo- 3 formed Polystyrene. The lower part is manufactured in extru- ded aluminum profile and painted in white epoxy (RAL 9010). COMFORT Temperature: 80ºC in continuos service PRODUCTS Air intake: Lateral, circular, with an attachment neck Installation: Its lightweight design and rigid construction 4 makes it easy and quick to fit. It also has four fastening squa- res for its attachment. EPA/HEPA Filter attachment: In the lower part, against the smooth fra- /ULPA me, in one single piece and held by attachment devices that can be slid and extracted by a guide, which exert a continuous 5 and constant pressure. For filters: Laminarven with a depth of 66 mm. HIGH Optionally are manufactured with a system for regulating TEMPERA- the flow from the room (HTPBCR). TURE Advantages 6 - Marked weight reduction with respect to pre-existing terminal boxes. - Smooth coating, facilitates easy cleaning of the diffuser grid. EQUIP- MENTS Plastic plenum. White-painted (RAL 9010) Sliding and extracta- Probes for integrity 206 extruded profile frame ble moutings for filter testing and differential 7 on the lower part of the positioning. pressure measure- unit. ment. MOTORS AND Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com TURBINES Fax +34 937 862 493 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 INFORMA- TION Advantages 1 Flow regulation sys- Diffuser grids: Perfo- PRE- tem control from the Nominal or rotational, FILTERS room. painted in white (RAL 9010). 2 References PAINTINGS HTPB-Without regulation system BOOTHS 3 Dimensions (mm) For Filters Neck COMFORT BxHxP (mm) inlet PRODUCTS Reference A A1 A2 B B1 B2 H (mm) UxP* Stock* 305x305x66 4H HTPB1212.2 340 270 320 340 285 320 325 610x305x66 150 1F A HTPB1224.2 655 575 625 340 285 320 325 610x610x66 150 1S B HTPB2424.2 655 575 625 655 575 625 365 1220x610x66 200 1S HTPB2448.2 1260 1180 1235 655 575 625 420 250 1S EPA/HEPA /ULPA HTPBCR-With regulation system 5 Reference Dimensions (mm) For Filters Neck UxP* Stock* A A1 A2 B B1 B2 H BxHxP (mm) inlet HIGH (mm) 1F TEMPERA- HTPBCR1212.2 340 270 320 340 285 320 325 305x305x66 1S HTPBCR1224.2 655 575 625 340 285 320 325 610x305x66 150 1S TURE HTPBCR2424.2 655 575 625 655 575 625 365 610x610x66 150 1S HTPBCR2448.2 1260 1180 1235 655 575 625 420 1220x610x66 200 6 250 EQUIP- *UxP *Stock MENTS Units per box F: Manufacturer, S: Stock, SL: Limited Stock 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 207 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- Technical Documentation TION HTPB-Without regulation system 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 208 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com EPA/HEPA Fax +34 937 862 493 /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 HTPBCR-With regulation system INFORMA- TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 209 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- Diffuser and Grilles TION Fitting Elements 1 Final filtration in the injection mouth or extraction of one- PRE- way flow for Clean Rooms. FILTERS Technical features Dimensions 2 Type: Diffuser grilles. PAINTINGS Models: BOOTHS For Plastic Housings: DFPAPHTPB: PerfoNominal aluminum diffuser painted in white 3 epoxy (RAL 9016). DFRHTP: Rotational diffuser painted in white epoxy (RAL 9016) COMFORT with a helical jet. PRODUCTS For Metal Housings: DFPAPHTM: PerfoNominal steel diffuser painted in white epoxy 4 (RAL 9016). DFRHTM: Rotational diffuser painted in white epoxy (RAL 9016) EPA/HEPA with a helical jet. /ULPA Assembly: Diffusers are mounted using screws. Perforation ratio: 40% for DFPAPHTPB / 45% for DFPAPHTM. 5 References Model Dimensions LxH For Filters LxH Unit Volume Weight UxP Stock HIGH (m3) (Kg) ** TEMPERA- Reference DFPAPHTPB 640x332x7 610x305 0.01 0.49 1S DFPALHTP 640x640x7 610X610 0.02 0.85 1S TURE DFPAPHTPB1224 DFPAPHTP 1243x640x7 1220X610 0.05 1.6 1S DFPAPHTPB2424 DFPAPHTPB 332x332x7 305X305 0.01 0.28 1S 6 DFPAPHTPB2448 332x332x7 305x305 0.01 - 1S DFPAPHTPB1212 DFRHTP 640x332x7 610x305 0.01 - 1S EQUIP- DFRHTP1212/16 DFRHTP 640x640x7 610X610 0.02 - 1S MENTS DFRHTP1224/32 DFRHTP 1243x640x7 1220x610 0.05 - 1S DFRHTP2424/32 DFRHTP 364x364x10 305x305 0.01 - 1F 7 DFRHTP2448/64 DFPAPHTM 669x364x10 610x305 0.02 - 1F DFPAPHTM1212 DFPAPHTM 516x516x10 457X457 0.03 - 1F MOTORS DFPAPHTM1224 DFPAPHTM 669x669x10 610X610 0.05 - 1F AND DFPAPHTM1818 DFPAPHTM 974x669x10 915X610 0.07 - 1F DFPAPHTM2424 DFPAPHTM 1279x669x10 1220X610 0.09 - 1F TURBINES DFPAPHTM2436 DFPAPHTM 364x364x10 305x305 0.01 - 1S DFPAPHTM2448 DFRHTM 669x364x10 610x305 0.01 - 1S 8 DFRHTM1212/16 DFRHTM 516x516x10 457x457 0.02 - 1S DFRHTM1224/32 DFRHTM 669x669x10 610x610 0.02 - 1S ADSOR- DFRHTM1818/24 DFRHTM 1279x669x10 1220x610 0.08 - 1S TION AND DFRHTM2424/32 DFRHTM DESODO- DFRHTM2448/64 RIZATION *UxP *Stock 210 Units per box F: Manufacturer, S: Stock, SL: Limited Stock 9 Venfilter [email protected] INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

Equipments 0 Terminal module INFORMA- TION Fitting Elements 1 Terminal module diffuser with incorporated ventilator. This module aspires the air from its plenum or from a PRE- clean atmosphere in order to create a localized laminar FILTERS flow for clean and white rooms. 2 Technical features Dimensions PAINTINGS Type: Diffuser Terminal module with built-in fan. BOOTHS Construction: Airtight welded electrogalvanized steel, white epoxy paint (RAL 9010) and kiln dried. 3 Air intake: Circular and at the top. Filter attachment: In the lower part, against the smooth COMFORT frame, one single piece and held by attachment devices that PRODUCTS exert a continuous and constant pressure. For filters: Air ultrafiltration to U15 class. 4 Radial fans with backward curved blades. EPA/HEPA - External rotor engine protected by thermoforming. /ULPA - Statically and dynamically balanced turbine according to VDI 2060 class Q 2.5. 5 Single phase 230V, 50Hz. HIGH Intensity: 0.67 Amp. TEMPERA- Power: 154 W. Speed: 2500 r.p.m. TURE Max. & Delta press.; Pa: 460 Noise level at 1.5 m/s.: 60 dB (A) 6 ACCESSORIES EQUIP- Pressure Gauge.- Pre. 1 (Range from 10 to 700 Pa). MENTS Pre-filter. Variator. 7 Pre-filter support. MOTORS Advantages AND - Independent laminar flow. Reduced height. TURBINES - Installable in standard roof constructions. - Interchangeable HEPA or ULPA filter. Ultra-air filtration of up to U15 (EN 1822). 8 - Filtre can be removed without altering roof sealing properties. DOP and Pressure Drop connections. - Speed modifiable by module. ADSOR- TION AND References DESODO- RIZATION Reference Dimensions Nominal Initial For Filters Neck Unit Volume Weight UxP Stock BxHxP flow (m3/h) Pa BxHxP Inlet (m3) (Kg) ** 9 MGGV2424.2 125 200 0.13 27 1F MGGV2448.2 680x680x300 600 125 610x610x66 200 (2) 0.26 44 1F INTER- 1290x680x300 1200 1220x610x66 NATONAL 211 NORMATI- *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock VE Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Equipments INFORMA- TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 Applications CLASS 100 LOCATED TREATMENT Low flow zone in an environment EPA/HEPA COMPOSITE ROOM class 10,000 / 100,000 /ULPA Class 10/100 work area - Pharmaceutical Laboratories. integrated in a 1000 / 10,000 class environ- - Agri-food industry. 5 ment - Hospitals. - Micro electronics. HIGH - Pharmacy. Venfilter [email protected] TEMPERA- - Optics Tel +34 937 862 607 www.venfilter.com - Bio-Technologies Fax +34 937 862 493 TURE CLASS 10 TO 10,000 WHITE ROOM 6 Ultra clean and localized environment, for a protection adapted to the process, equipment EQUIP- or work areas. MENTS - Sterile conditioning. - Agri-food industry. 7 - Precision mechanics. - QA. MOTORS 212 AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 MGGV2448 INFORMA- TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 213 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com INFORMA- MGGV2424 Fax +34 937 862 493 TION 214 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 UFA AIR air INFORMA- treatment unit TION Filtration Unit: VEN AIR 1 Supply and extract air for Very High Efficiency or absolute PRE- HEPA filters. FILTERS Technical features Dimensions 2 Type: UFA series filtration units. H PAINTINGS Construction: Filter-holder drawer built in 25 mm thick BOOTHS sandwich panel, externally lacquered, aluminum profile chassis and polyamide corner pieces. 3 Registration: Side (left or right). Filter fixing: BTRA frame (not included in tariff price) COMFORT Installation: Installed at the ends of the air distribution duct PRODUCTS or inserted in the ventilation circuit. For filters: HEPA 4p Constant flow control: Included as standard B Optional: Prefilter EPA/HEPA /ULPA HEPA Antimicrobial 5 DIRTY FILTER PROBE PROBE ASSEMBLY CONTROL (Mounted and wired) Control characteristics: - On / Off - Fan Speed ​C​ ontrol - Hours of operation programming. - Control dirty filters by TIMER. - ModBus connection. Advantatges HIGH TEMPERA- - Range with flow rates from 1500 to 14.000m3/h. - Electronic motors with EC technology for low electric consumption. TURE - Low noise level 6 References EQUIP- Article code Model Dimensions No. of No. of Unitary Flow Unitary Flow FAN Weight UxP Stock MENTS BxHxP Filters Filters (m3/h) H13 (m3/h) H14 (Kg) 610x610x292 305x610x292 7 730x520x1200 mm 1500 1200 UFA-HEPA-1500 UFA-AIR 1 4000 3000 K3G250 RR02-12 76 1 F 5500 4200 UFA-HEPA-4000 UFA-AIR 730x730x1300 mm 1 1 8000 6000 K3G355 RJ75-01 160 1 F MOTORS 16000 12000 K3G400 AY87-02 210 1 AND UFA-HEPA-5500 UFA-AIR 1020x730x1400 mm 1 K3G450 AQ24-01 290 1 K3G560 AQ04-01 470 F TURBINES UFA-HEPA-8000 UFA-AIR 1320x730x1450 mm 2 F UFA-HEPA-14000 UFA-AIR 1320x1340x1500 mm 4 8 Accesories Reference Description ADSOR- UFA-SPD Differential Pressure Probe TION AND UFA-CR DESODO- Control Regulation RIZATION Venfilter 9 Tel +34 937 862 607 Fax +34 937 862 493 [email protected] 215 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- Technical documentation TION UFA-HEPA-1500 1 PRE- 670 FILTERS 2 670 x 310 1200 PAINTINGS Available pressure 310 BOOTHS pfs[Pa[ 730 600 3 315 COMFORT pfs_[in. wg[ModelPowerFANIntensityVoltage PRODUCTS K3G250 RR02 I2 750 W rpm 3.30 A 230V/I 50/60Hz 4250 4 Fan performance EPA/HEPA /ULPA 5 HIGH Maximum point TEMPERA- Filter dirty TURE Filter clean 6 EQUIP- qv [m3/h[ MENTS Airflow 7 Maximum flow: fan flow with free outlet, without any blockage Clean filter: the estimated pressure loss that the filter has during the first hours of operation MOTORS Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss AND '' will be higher than in the case of a clean filter TURBINES 8 NOISE LEVELS ADSOR- Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure TION AND DESODO- 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total RIZATION 48,4 61,6 52,5 53,1 57,6 56,6 55,0 51,9 49,2 9 Venfilter INTER- NATONAL Tel +34 937 862 607 [email protected] NORMATI- Fax +34 937 862 493 www.venfilter.com 216 VE

Equipments 0 Technical documentation INFORMA- TION UFA-HEPA-4000 1 730 670 x 625 625 400 670 PRE- FILTERS 1300 685 2 Model Power FAN Intensity Voltage K3G355 RJ75 01 1100 W rpm 1,70 A 230V/I 50/60Hz PAINTINGS 2400 BOOTHS 3 COMFORT PRODUCTS Fan performance 4 qv [cfm[ EPA/HEPA /ULPA Available pressure Filter dirty pfs_[in. wg[ pfs[Pa[ 5 Filter clean HIGH qv [m3/h[ 3900 TEMPERA- Airflow TURE Maximum flow: fan flow with free outlet, without any blockage 6 Clean filter: the estimated pressure loss that the filter has during the first hours of operation Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss EQUIP- '' will be higher than in the case of a clean filter MENTS NOISE LEVELS 7 Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure MOTORS 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total AND 48,9 48,1 53,5 53,8 49,6 50,3 48,5 47,3 57,3 TURBINES Venfilter [email protected] 217 Tel +34 937 862 607 www.venfilter.com 8 Fax +34 937 862 493 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

0 Equipments INFORMA- Technical documentation TION UFA-HEPA-5500 1 960 PRE- FILTERS 2 730 960 x 680 450 680 PAINTINGS 1400 1020 BOOTHS 3 COMFORT Model Power FAN Intensity Voltage PRODUCTS K3G400 AY87 02 1850 W rpm 2,9 A 400V/III 50/60Hz 2180 4 Fan performance EPA/HEPA /ULPA qv [cfm[ 5 HIGH Available pressure Maximum point TEMPERA- pfs[Pa[ Filter dirty pfs_[in. wg[ TURE Filter clean 6 qv [m3/h[ EQUIP- Airflow MENTS Maximum flow: fan flow with free outlet, without any blockage 7 Clean filter: the estimated pressure loss that the filter has during the first hours of operation Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss MOTORS '' will be higher than in the case of a clean filter AND TURBINES 8 NOISE LEVELS Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure ADSOR- TION AND 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total DESODO- 48,3 48,3 59,9 56,1 53,4 53,9 49,0 46,6 60,0 RIZATION 218 Venfilter [email protected] 9 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 INTER- NATONAL NORMATI- VE

Equipments 1260 0 680 Technical documentation INFORMA- TION UFA-HEPA-8000 1 1260 x 680 730 PRE- 500 FILTERS 1450 1320 2 Model Power FAN Intensity Voltage PAINTINGS K3G450 AQ24 01 2730 W rpm 4,2 A 400V/III 50/60Hz BOOTHS 2040 3 COMFORT PRODUCTS Fan performance 4 qv [cfm[ EPA/HEPA /ULPA Available pressure Maximum point pfs_[in. wg[ pfs[Pa[ Filter dirty 5 Filter clean HIGH TEMPERA- qv [m3/h[ 8000 Airflow TURE Maximum flow: fan flow with free outlet, without any blockage 6 Clean filter: the estimated pressure loss that the filter has during the first hours of operation Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss EQUIP- '' will be higher than in the case of a clean filter MENTS NOISE LEVELS 7 Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure MOTORS AND 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total 49,6 62,7 TURBINES 50,9 61,1 59,8 56,2 53,7 52,9 55,1 219 8 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com ADSOR- Fax +34 937 862 493 TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

0 Equipments INFORMA- Technical documentation TION UFA-HEPA-14000 1 1260 PRE- FILTERS 2 1260 x 1280 1340 1280 560 PAINTINGS 1500 1320 BOOTHS 3 COMFORT Model Power FAN Intensity Voltage PRODUCTS K3G560 AQ04 01 4700 W rpm 7,3 A 400V/III 50/60Hz 1750 4 EPA/HEPA Fan performance /ULPA qv [cfm[ 5 HIGH Available pressure Maximum point TEMPERA- pfs[Pa[ pfs_[in. wg[ TURE 6 Filter dirty EQUIP- Filter clean MENTS qv [m3/h[ 12000 7 Airflow MOTORS Maximum flow: fan flow with free outlet, without any blockage AND Clean filter: the estimated pressure loss that the filter has during the first hours of operation Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss TURBINES '' will be higher than in the case of a clean filter 8 NOISE LEVELS Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure ADSOR- TION AND 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total DESODO- 51,9 53,1 63,1 57,5 59,0 60,0 57,4 57,7 65,8 RIZATION 220 Venfilter [email protected] 9 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 INTER- NATONAL NORMATI- VE

Equipments Dimensions 0 Box INFORMA- TION Fitting Elements 1 Air impulsion or extraction for High Efficiency filtration. PRE- Technical features FILTERS Type: Filtering module for Air Treatment. 2 Construction: Filter holder case constructed in 23 mm sandwich panel. Thick, lacquered on the outside, aluminum profile frame and PAINTINGS polyamide corner pieces and 50 mm skirting board. BOOTHS Optional: Stainless Steel. Registration: At the side (left or right). 3 Filter attachment: By an a BTRM frame with 4 attachment clips. Installation: Installed at the ends of the air distribution duct or in- COMFORT serted in the ventilation circuit. PRODUCTS For filters: Fitting of filters with flange or bridle (Multiven, Varipac) Includes: Guide for high efficiency pre-filter or filter. H 4 Optional: The module can include a fan, cooling/heating coils, flow B regulation gates and a control system and EPA/HEPA Hoppers to insert into a duct. /ULPA Advantages 5P - Compact High Flow Solution. HIGH - High-efficiency filtration- from M5 to F9. TEMPERA- - Smell and comtaminant filtration (Multicarb). - Filter assembly with 25mm. tab. TURE - Record for right or left side filter maintenance. 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 221 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- References TION Reference Model Dimensions Num. Filters Num. Filters Max. Nominal Weight UxP Stock 1 BxHxP 595x595x292 595x287x292 flow (m3/h) (Kg) * * BOX1224 BOX-AE 1700 75 1 F PRE- BOX2424 BOX-AE 425x730x1000 1 1 3400 95 1 F FILTERS BOX2436 BOX-AE 730x730x1000 1 5100 120 1 F BOX3624 BOX-AE 730x1035x1000 1 1 5100 120 1 F 2 BOX2448 BOX-AE 1085x730x1000 2 1 6800 135 1 F BOX4824 BOX-AE 730x1340x1000 2 6800 135 1 F PAINTINGS BOX3648 BOX-AE 1340x730x1000 2 2 10200 170 1 F BOOTHS BOX4848 BOX-AE 1085x1340x1000 4 13600 200 1 F BOX6048 BOX-AE 1390x1340x1000 4 2 17000 220 1 F 3 BOX7248 BOX-AE 1650x1340x1000 6 20400 260 1 F BOX7272 BOX-AE 1950x1390x1000 9 30600 330 1 F COMFORT 1950x1950x1000 PRODUCTS *UxP (*) Other sizes: pleased consult. *Stock 4 Units per box F: Manufacturer, S: Stock, SL: Limited Stock EPA/HEPA Technical Documentation /ULPA Module configuration 5 1224 2424 2436 3624 2448 4824 HIGH TEMPERA- 3648 4848 6048 7248 7272 TURE 222 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com 6 Fax +34 937 862 493 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments Dimensions 0 Boxhepa H P INFORMA- B TION Fitting Element 1 Air impulsion or extraction for Very High Efficiency filtration. PRE- FILTERS Technical features 2 Type: Filtering module for Air Treatment. Construction: Filter holder case constructed in 23 mm sandwich PAINTINGS panel. Thick, lacquered on the outside, aluminum profile frame BOOTHS and polyamide corner pieces and 50 mm skirting board. Optional: Stainless Steel. 3 Registration: At the side (left or right) Filter attachment: By an a BTRA frame with 4 fastening stays. COMFORT Installation: Installed at the ends of the air distribution duct or PRODUCTS inserted in the ventilation circuit. For filters: Fitting of Very High Efficiency or Absolute filters. (Po- 4 liven and Astroven) Includes: Guide for high efficiency pre-filter or filter. EPA/HEPA /ULPA Advantages 5 - Compac Very High Flow Solution. - Absolute fitlration, from H10 to H14. HIGH - 292 mm. filter assembly. TEMPERA- - Record for right or left side filter maintenance. TURE References 6 Reference Model Dimensions Num. Filters Num. Filters Max.Nominal Max.Nominal Weight UxP Stock BxHxP 610x610x292 EQUIP- BOXHP1224 BOX-HP 610x305x292 Flow (m3/h) Flow (Kg) * * MENTS BOXHP2424 BOX-HP 450x750x1000 1 BOXHP2436 BOX-HP 750x750x1000 1 H10 (m3/h) H13 7 BOXHP3624 BOX-HP 750x1075x1000 1 BOXHP2448 BOX-HP 1125x720x1000 2 1 2000 1700 80 1 F MOTORS BOXHP4824 BOX-HP 750x1380x1000 2 AND BOXHP3648 BOX-HP 1430x750x1000 2 5000 4000 100 1 F BOXHP4848 BOX-HP 1125x1380x1000 4 TURBINES BOXHP6048 BOX-HP 1430x1380x1000 4 1 7000 5700 125 1 F BOXHP7248 BOX-HP 1710x1380x1000 6 8 BOXHP7272 BOX-HP 2010x1430x1000 9 1 7000 5700 125 1 F 2010x2085x1000 ADSOR- 10000 8000 140 1 F TION AND DESODO- 10000 8000 140 1 F RIZATION 2 14000 11400 180 1 F 9 20000 16000 210 1 F INTER- NATONAL 2 24000 19400 240 1 F NORMATI- 30000 24000 270 1 F VE 45000 36000 350 1 F *UxP *Stock - Other sizes: pleased consult. Units per box F: Manufacturer, S: Stock, SL: Limited Stock Venfilter [email protected] 223 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Equipments INFORMA- Technical Documentation TION Module configuration 1 PRE- FILTERS 2 1224 2424 2436 3624 2448 4824 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 3648 4848 6048 7248 7272 224 EPA/HEPA Venfilter [email protected] /ULPA Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 Boxcarb INFORMA- TION Fitting Elements 1 Air impulsion or extraction for active carbon cartridges. PRE- FILTERS Technical features Dimensions 2 Type: Filtering module for Air Treatment with Odors and Gases. PAINTINGS Construction: Filter holder case constructed in 23 mm sandwich BOOTHS panel. Thick, lacquered on the outside, aluminum profile frame and polyamide corner pieces and 50 mm skirting board. 3 Registration: At the side (left or right). Filter attachment: Support with quick bayonet adjustment. COMFORT Installation: Installed at the ends of the air distribution duct or PRODUCTS inserted in the ventilation circuit. For filters: Cylindrical cartridges of rechargeable active carbon. 4 Includes: Guide for prefilter or high efficiency filter. EPA/HEPA Advantages H /ULPA - Solution for inserting active carbon cylindrical cartridges into a conduct. B P 5 - Smell and contaminant filtration. - Record for right or left side filter maintenance. HIGH TEMPERA- References TURE Reference Model Dimensions Dimensions No. of Minium Nominal Carbon Weight UxP Stock BxHxP cartridges (mm.) Cartridges contact flow (Kg) (Kg) ** 6 BOXCC1224 BOX-CC Time (sec.) (m3/h) BOXCC2424 BOX-CC 450x750x1000 145x85x250 8 800 23,2 80 1F EQUIP- BOXCC2448 BOX-CC 750x750x1000 145x85x250 16 0,1 1600 46,4 100 1F MENTS 750x1380x1000 145x85x250 32 0,1 3200 92,8 140 1F 0,1 7 *UxP *Stock MOTORS Units per box F: Manufacturer, S: Stock, SL: Limited Stock AND Venfilter [email protected] 225 TURBINES Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

0 Equipments INFORMA- Technical Documentation TION Module configuration 1 PRE- FILTERS 2 1224 2424 2436 3624 2448 4824 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 3648 4848 6048 7248 7272 226 EPA/HEPA Venfilter [email protected] /ULPA Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 Racks for INFORMA- pre-filters TION Fitting elements 1 PRE- FILTERS Modular frames for flat filters with a Medium and High Dimensions 2 Efficiency flange. PAINTINGS Technical features BOOTHS Type: Universal Frame for front fitting. 3 Frame: Galvanized Steel and in Stainless Steel. Joint: Neoprene. COMFORT Fitting of filter: 4 spring clamps. PRODUCTS Advantages 4 - Structures adaptable to any installation. EPA/HEPA - Filter assembly includes a polyurethane seal and four /ULPA springs to retain the filter and prevent leaks or particle mi- gration. 5 - Interconnection perforations for the securing or connection of racks. References HIGH TEMPERA- TURE Reference Model Dimensions For FIlters Insert Unit Weight UxP Stock 6 BxHxP BxH thicknesses Volume BTRM121203 BTRM (Kg) * * EQUIP- BTRM121204 BTRM 305x305x75 287/290x287/290 (mm) (m3) MENTS BTRM122403 BTRM 305x305x100 287/290x287/290 25 o 25+25 0,007 0,53 F BTRM122404 BTRM 305x610x75 287/290x592/595 0,01 7 BTRM122406 BTRM 305x610x100 287/290x592/595 25+50 0.014 F BTRM202003 BTRM 305x610x140 287/290x592/595 25 o 25+25 0,019 MOTORS BTRM202004 BTRM 508x508x75 490/495x490/495 0,022 1,1 14 SL AND BTRM202006 BTRM 508x508x100 490/495x490/495 25+50 0,02 BTRM202404 BTRM 508x508x140 490/495x490/495 25+100 0,03 SL TURBINES BTRM242403 BTRM 508x610x100 490/495x592/595 25 o 25+25 0,03 BTRM242404 BTRM 610x610x75 592/595x592/595 25+50 0,03 8F 8 BTRM242406 610x610x100 592/595x592/595 25+100 0,03 25+50 0,04 1,45 9 F 25 o 25+25 25+50 7F 6F SL 2,1 7 S 5 SL BTRM 610x610x140 592/595x592/595 25+100 0.05 4F ADSOR- TION AND *UxP *Stock DESODO- Units per box F: Manufacturer, S: Stock, SL: Limited Stock RIZATION Venfilter 9 Tel +34 937 862 607 Fax +34 937 862 493 [email protected] 227 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- Racks for Absolute TION filter 1 Fitting elements PRE- FILTERS 2 Modular frames for High-efficiency filters and activated Dimensions carbon cells. PAINTINGS BOOTHS Technical features 3 Type: Front-mounted Universal Frame. Frame: Galvanized steel. COMFORT Filter fitting: Fixed straps. PRODUCTS Advantages 4 - Structure adaptable to any installation. EPA/HEPA - Filter assembly includes a one-piece, semi-circular polyu- /ULPA rethane seal and four non-movable angle pieces with tigh- tening screws and bolts for filter retention, in order to avoid 5 leaks or particle migration. HIGH References Modelo Dimensiones Para Filtros Volumen Stock TEMPERA- BxHxP BxHxP Unitario * Referencia TURE 325x325x210 305x305x150 (m3) F BTRA121206 BTRA 325x325x345 305x305x292 0,02 F 6 BTRA121212 BTRA 321x626x210 305x610x150 F BTRA122406 BTRA 321x626x345 305x610x292 0,04 S EQUIP- BTRA122412 BTRA 626x626x210 610x610x150 F MENTS BTRA242406 BTRA 626x626x345 610x610x292 0,04 S BTRA242412 BTRA 0,07 7 0,08 0,14 MOTORS AND *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock TURBINES 228 Venfilter [email protected] 8 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Motors and turbines Dimensions 0 Multiven G4 INFORMA- TION Filters for turbines 1 Filtration of air inlet, outlet and recirculation in ventilation systems where a high degree of durability is required, such PRE- as: Gas turbines and turbochargers. FILTERS Technical features 2 Type: Compact Multi-dihedral Rigid Bags Filter. PAINTINGS Frame: Plastic (Polystyrene). BOOTHS Filter Element: Synthetic. Separators: Thermoplastic glue beads. 3 Sealant: Polyurethane. EN 779 Class: G4. COMFORT ISO 16890: Coarse 60%. PRODUCTS Recommended Final Pressure Drop: 450 Pa. Temperature: 80ºC, continuous service. 4 Advantages EPA/HEPA /ULPA - Rigid construction facilitating installation, all components are Anticorrosive and incinerable. 5 - High Nominal Flow for a low Pressure Drop, this is obtained with a larger filter area in m2 with respect to bag filters. - Excellent performance in difficult operating conditions. HIGH TEMPERA- TURE 6 EQUIP- MENTS References Dimensions EN 779 ISO 16890 Filter Nominal Initial Unit UxP Stock 7 BxHxP Class Surface Flow Pa Volume ** Reference (m3/h) MOTORS (m2) (m3) AND TURBINES MVS122412G4 592x292x292 G4 Grueso 60% 3,00 1750 60 0,05 1F 8 MVS202412G4 592x492x292 G4 Grueso 60% 5,00 2800 60 0,09 1F MVS242412G4 592x592x292 G4 Grueso 60% 6,00 3400 60 0,11 1F ADSOR- MVS122417G4 592x292x440 G4 Grueso 60% 4,50 1750 80 0,08 1F TION AND MVS202417G4 592x492x440 G4 Grueso 60% 7,50 2800 80 0,13 1F DESODO- MVS242417G4 592x592x440 G4 Grueso 60% 9,00 3400 80 0,16 1F RIZATION *UxP *Stock 9 Units per box F: Manufacturer, S: Stock, SL: Limited Stock Venfilter [email protected] 229 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Motors and turbines INFORMA- V60 TION Filters for turbines 1 Filtration of incoming, outgoing and recirculation air in PRE- ventilation systems where a high degree of durability is FILTERS required, such as: Gas turbines and turbo-compressors. 2 Technical features Dimensions Certification PAINTINGS Type: Rigid bag filter. BOOTHS Frame: Polyurethane. Media: Progressive synthetic fiber structure. 3 Bags: Conical and heat-sealed, with spacers built into the polyurethane frame, forming a rigid and aerodynamic unit. COMFORT Average Efficiency % (Em): 63% PRODUCTS EN 779 Class: M6. ISO 16890: ePM10 55%. 4 Recommended Final Pressure Pressure Drop: 450 Pa Retention capacity (AC Fine/1000 Pa): 3000 g/unit EPA/HEPA Breaking strength: 3000 Pa. /ULPA Temperature: 90ºC. 5 Advantages HIGH - Incinerable. TEMPERA- - Bolsas autoportantes. - Perdida de carga incial baja. TURE References 6 Reference Dimensions Number EN 779 ISO 16890 Nominal Initial Filter Energy Energy Energy UxP Stock EQUIP- BxHxP of Class flow Pa Surface Class MENTS (m3/h) 16890 Cons. Cons. * * bags (m2) **** 7 kWh/ kWh/year B MOTORS year 16890 AND 779 ** TURBINES * 8 V60-1/1 595x595x600 8 M6 ePM10 70% 5.56 3400 62 790 645 2 S ADSOR- V60-1/2 287x595x600 4 TION AND M6 ePM10 70% 2.8 1700 4F DESODO- RIZATION *UxP *Stock * Energy Consumption kWh / year: Calculated according to Eurovent 4 / 21-2017 guidelines. Units per box 9 F: Manufacturer, S: Stock, SL: Limited Stock ** Energy Consumption kWh / year: Calculated according to Eurovent guidelines. INTER- Venfilter NATONAL NORMATI- 230 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com VE

Motors and turbines Dimensions 0 Certification Multiven Turbine 292 INFORMA- TION Filters for turbines 1 Gas turbine air inlet. PRE- Technical features FILTERS Type: Compact Polyhedral Rigid Bag Filter. 2 Frame: Polystyrene. Filtering Element: Fiberglass paper. PAINTINGS Separators: Thermoplastic glue beads BOOTHS Sealant: Bases, side and front sealed with Polyurethane. Joint: Bicomponent polyurethane liquid system. (Semicircular 3 expanded polyurethane) Grill: Reinforcement grid as the air outlet in the model MVTG, the COMFORT model MVTGSR does not include safety grid. PRODUCTS Average Efficiency % (Em): 80% < Em < 90% et 95% < Em. EN779 Class: F7 and F9. 4 ISO 16890: ePM1 50% and ePM1 80%. Recommended Final Pressure Drop:600 Pa. EPA/HEPA Temperature: 80ºC continuous service. /ULPA Humidity: 100% RH. 5 References HIGH Reference Dimensions EN 779 *ME ISO 16890 Filter Nominal Initial Unit Weight UxP Stock TEMPERA- BxHxP Class % Surface MVTG242412F9 flow Pa volume (Kg) * * TURE MVTG202412F9 (m2) MVTG122412F9 19 (m3/h) (m3) 6 MVTG242412F7 15 MVTG202412F7 592x592x292 F9 78 ePM1 80% 8.5 4250 155 0.11 5 1 F EQUIP- MVTG122412F7 19 MENTS 592x492x292 ePM1 80% 15 3500 0.09 4 1F 8.5 7 592x292x292 ePM1 80% 2125 0.06 3 1F MOTORS 592x592x292 F7 54 ePM1 50% 4250 78 0.11 5 1 F AND 592x492x292 ePM1 50% 3500 0.09 4 1F TURBINES 592x292x292 ePM1 50% 2125 0.06 3 1F 8 MVTGSR242412F9 592x592x292 F9 78 ePM1 80% 19 4250 155 0.11 5 1F ADSOR- 15 4 1F TION AND MVTGSR202412F9 592x492x292 ePM1 80% 8.5 3500 0.09 3 1F DESODO- 19 5 1F RIZATION MVTGSR122412F9 592x292x292 ePM1 80% 15 2125 0.06 4 1F 8.5 3 1F 9 MVTGSR242412F7 592x592x292 F7 54 ePM1 50% 4250 115 0.11 INTER- MVTGSR202412F7 592x492x292 ePM1 50% 3500 0.09 NATONAL NORMATI- MVTGSR122412F7 592x292x292 ePM1 50% 2125 0.06 VE *UxP *Stock *ME%: Minium Efficiency to EN779:2012 Units per box F: Manufacturer, S: Stock, SL: Limited Stock Venfilter [email protected] 231 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Motors and turbines INFORMA- Multiven Turbine 440 TION Filters for turbines 1 Gas turbine air inlet. PRE- FILTERS 2 Technical features Dimensions Certification PAINTINGS Type: Compact Polyhedral Rigid Bag Filter. BOOTHS Frame: Polystyrene. Filtering Element: Fiberglass paper. 3 Separators: Thermoplastic glue beads. Sealant: Bases, side and front sealed with Polyurethane. COMFORT Joint: Bicomponent polyurethane liquid system. (Semicircu- PRODUCTS lar expanded polyurethane) Grill: Reinforcement grid as the air outlet. 4 Average Efficiency % (Em): 95% < Em. EN779 Class: F7, F8 and F9. EPA/HEPA ISO 16890: ePM1 60%, ePM1 65% and ePM1 85%. /ULPA Recommended Final Pressure Drop:600 Pa. Temperature: 80ºC continuous service. 5 Humidity: 100% RH. HIGH References TEMPERA- Reference Dimensions EN *ME ISO 16890 Filter Nominal Initial Energy Energy Energy Unit weigth UxP S TURE BxHxP 779 % Surface flow Pa Class Cons. Cons. Volume (Kg) * * Class (m3/h) 16890 kWh/ kWh/ 6 (m2) **** year year (m3) 779 16890 EQUIP- 32 MENTS 27 * ** 16 7 MVTG242417F9 592x592x440 F9 78 ePM1 90% 32 3400 93 A+ 1200 1189 0.16 12 1 F MVTG202417F9 592x492x440 F8 ePM1 90% 27 MOTORS MVTG122417F9 592x292x440 F7 ePM1 90% 16 2800 A+ 0.13 9 1 F AND MVTG242417F8 592x592x440 32 MVTG202417F8 592x492x440 65 ePM1 65% 27 1700 A+ 0.08 6 1 F TURBINES MVTG122417F8 592x292x440 ePM1 65% 16 MVTG242417F7 592x592x440 ePM1 65% 3400 79 A 950 860 0.16 12 1 F 8 MVTG202417F7 592x492x440 MVTG122417F7 592x292x440 54 ePM1 60% 2800 A 0.13 9 1 F ADSOR- ePM1 60% TION AND ePM1 60% 1700 A 0.08 6 1 F DESODO- RIZATION 3400 70 A+ 790 792 0.16 12 1 F 9 2800 A+ 0.13 9 1 F INTER- 1700 A+ 0.08 6 1 F NATONAL NORMATI- *UxP *Stock *ME %: Mínima Eficacia EN779:2012 Units per box F: Manufacturer, S: Stock, SL: Limited Stock *Consumo Energía kWh/año: Calculado según las directrices de Eurovent 4/21-2017. VE **Consumo Energía kWh/año: Calculado según las directrices de Eurovent. Venfilter 232 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com

Motors and turbines 0 Multiven Turbine Epa INFORMA- TION Filters for turbines 1 Gas turbine air inlet. PRE- FILTERS Technical features Dimensions 2 Certification Type: Compact Polyhedral Rigid Bag Filter. PAINTINGS Frame: Polystyrene. BOOTHS Filtering Element: Fiberglass paper. Separators: Thermoplastic glue beads 3 Sealant: Bases, side and front sealed with Polyurethane. Joint: Bicomponent polyurethane liquid system. (Semicir- COMFORT cular expanded polyurethane) PRODUCTS Grill: Reinforcement grid as the air outlet in the model MVTG, the model MVTGSR does not include safety grid. 4 MPPS Efficiency: 85%. EN1822 Class: E10. EPA/HEPA Recommended Final Pressure Drop: 450 Pa. /ULPA Temperature: 80ºC continuous service. Humidity: 100% RH. 5 References HIGH TEMPERA- Reference Model Dimensions Class Filter Nominal Initial Unit Weigth MPPS UxP S BxHxP EN 1822 Surface flow Pa Volume TURE MVTG242412H10 (m3/h) 185 (Kg) Efficiency % * * MVTG202412H10 (m2) 4250 (m3) 6 MVTG122412H10 MV-TG 592x592x292 E10 19 3500 185 0.11 5 85 1 F MVTGSR242412H10 MV-TG 592x492x292 E10 15 2125 0.09 4 1F EQUIP- MVTGSR202412H10 MV-TG 592x292x292 E10 8.5 4250 200 0.06 3 1F MENTS MVTGSR122412H10 MV-TG 592x592x292 19 3500 0.11 5 85 1 F MVTG24241217H10 MV-TG 592x492x292 15 2125 0.09 4 1F 7 MVTG202417H10 MV-TG 592x292x292 8.5 5400 0.06 3 1F MVTG122417H10 MV-TG 592x592x440 32 4500 0.16 12 85 1 F MOTORS MV-TG 592x492x440 27 2700 0.13 9 1F AND MV-TG 592x292x440 16 0.08 6 1F TURBINES *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock 8 Venfilter [email protected] 233 ADSOR- Tel +34 937 862 607 www.venfilter.com TION AND Fax +34 937 862 493 DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

0 Motors and turbines INFORMA- Duraven TION Filters for turbines 1 Designed for air suction in gas turbines, compressors, PRE- centrifuges, machinery and places where there is consi- FILTERS derable vibration. 2 Technical features Dimensions PAINTINGS Type: Compact Filter with High Efficiency aluminum separators. BOOTHS Frame: Galvanized Steel with two bridles or flanges. Filtering Element: Glass microfiber paper. 3 Separators: Corrugated (Fluted) aluminum separator. Sealant: Polyurethane. COMFORT Clamp or flange: Galvanized Steel. PRODUCTS Grille: Grille on both sides. Gravimetric Efficiency: 98% and 99.95% 4 Average Efficiency % (Em): 60% ≤ Em < 80% and 90% ≤ Em < 95%. EPA/HEPA EN 779 Class: M6 and F8. /ULPA ISO 16890: ePM10 70% and ePM1 70%. Recommended Final Pressure Pressure Drop: 600 Pa. 5 Temperature: 80ºC continuous service. HIGH References TEMPERA- Reference Dimensions EN 779 *ME ISO 16890 Filter Nominal Nominal Unit Weight UxP S TURE BxHxP Class % Surface Flow Flow volume (Kg) * * 6 (m2) (m3/h)/Pa (m3/h)/Pa (m3) EQUIP- DU242412F8 595x595x292 F8 71 ePM1 70% 12 3400/170 4250/150 0.11 8,2 1 F MENTS DU242412F6 595x595x292 M6 ePM10 70% 12 3400/130 4250/110 0.11 8,2 1 F 7 *UxP *Stock *ME%: Minium Efficiency to EN779:2012 MOTORS Units per box F: Manufacturer, S: Stock, SL: Limited Stock AND Venfilter TURBINES 234 Tel +34 937 862 607 [email protected] 8 Fax +34 937 862 493 www.venfilter.com ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Motors and turbines 0 Cartridges turbines INFORMA- TION Filters for turbines 1 Air inlet of gas turbines, compressors and engines. PRE- FILTERS Technical features Dimensions 2 Type: High Efficiency self-cleaning cartridge. PAINTINGS Frame: Upper and lower cover. BOOTHS Construction: Interior and upper collectors in expanded gal- vanized steel. 3 Filtering Element: Mixture of resin-impregnated cellulose and synthetic fibers. COMFORT Sealant: Resin resistant to high temperatures and stable un- PRODUCTS der the action of chemical agents. Joint: Circular neoprene seal with a triangular section glued 4 on the top cover. Separators: Thermoplastic glue (hotmel) spacers. EPA/HEPA Average Efficiency % (Em): 95% Em /ULPA EN 779 Class: F9. Recommended Final Pressure Pressure Drop: 1500 Pa. 5 Temperature: 80ºC continuous service. References Reference Model Diameters (mm) Average Efficiency EN 779 EN Filter Nominal Initial Unit Weight UxP S HIGH efficiency % (MPPS E Class 1822 Surface flow Pa Volume (Kg) * * TEMPERA- CTG324560-SGF9 CF-TG 324x215x560 Class CTG324700-SGF9 CF-TG 324x215x700 (Em) %) F9 (m2) (m3/h) (m3) F TURE CTG324660-K1+ CF-TG (445/324x660) + 96% F9 17 F CTG445324660-K1 CF-TG 96% F9 22 950 190 0,07 7 1 F 6 CTG324660-SGF9+ CF-TG (324x660) 97% 48 CTG445324660-SGF9 CF-TG (445/324X660) + 1175 190 0,09 8,3 1 EQUIP- CTG324660-F9+ 96% MENTS CTG445324660-F9 (324x660) 2600 163 0.22 16 1 CTG324660-E10+ (445/324x660) + 98% 7 CTG445324660-E10 F9 45 2600 146 0.22 16 1 F (324x660) MOTORS (445/324x660) + F9 45 2600 137 0.22 16 1 F AND (324x660) 85% E10 45 2600 143 0.22 16 1 F TURBINES *UxP *Stock 8 Units per box F: Manufacturer, S: Stock, SL: Limited Stock Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 235 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Motors and turbinesFilter surface INFORMA- General Information TION TG Cartridge Filters have been designed to work in extreme working condi- 1 tions in the aspiration of gas turbines, generators and other rotary-operation equipment, for high performance work cycles in urban, industrial, interior, PRE- marine and coastal environments. FILTERS TG cartridges are available in a wide range of sizes in order to meet the needs of our clients. 2 They are available in a wide variety of filter media in order to ensure effective performance in specific operational conditions, with 99.8% efficacy in all ca- PAINTINGS ses, and capable of retaining particles of up to 0.5 microns. BOOTHS Construction 3 The filter media used for TG Cartridge production may be: COMFORT S: Synthetic filter media PRODUCTS K1: Synthetic and cellulose mixture F: Water-repellent micro fiberglass media 4 SG-F9: Synthetic and fiberglass media H: Hepa filter media EPA/HEPA The uniform separations between filter media folds are maintained with the use of perimeter bands of melted adhe- /ULPA sive that is applied heated to interior and exterior fold surfaces. This ensures constant form and distances between the folds, maintaining the original characteristics of the fold for long periods of time, while optimising the effective 5 use of the filter surface. The cartridges include inner and outer expanded galvanized metal covers or protections in order to guarantee the safety of the media, while maximizing both the filter surface and dust accumulation capacity. HIGH A thermoplastic seal is also made in order to prevent leakages between the galvanized covers at the ends of the TEMPERA- filter packet, resulting in a unified product. These filters are assembled securely using a circular polyurethane gasket. TURE Venfilter 6 236 Tel +34 937 862 607 [email protected] EQUIP- Fax +34 937 862 493 www.venfilter.com MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Motors and turbines 0 Filter Media with respect to Turbines K1 SG-F9 F INFORMA- TION Filter media recommended for turbine operational a a a conditions a a 1 a a a URBAN AND INDUSTRIAL AREAS: PRE- Heavy airborne hydrocarbons, various particle sizes aa FILTERS (large and small). INDUSTRIAL 2 Major concentrations of large and small particles. PAINTINGS MARINE BOOTHS Coastal, humid atmospheres, moisture-laden air 3 DESERT Arid, high dust concentrations, sandy, very fine parti- COMFORT cles. PRODUCTS ARCTIC Very cold, dry air, all humidity is transformed into 4 frost and builds up on the filter. EPA/HEPA Cleaning Impulsion System K1 SG-F9 F /ULPA Filter media recommended filter cleaning. a a 5 (Self-cleaning system) HIGH Applications TEMPERA- Suitable for filter intake, outlet and recirculation in ventilation systems that require high safety levels with res- TURE pect to clean air, such as: • Cogeneration and power generation plants for gas turbines (air combustion, turbine ventilation, alter 6 nator ventilation and room ventilation in some cases) • Cogeneration plants for motors (air combustion, and room ventilation in some cases) EQUIP- • Compressors used for air fractionation in the production of gases (oxygen, etc.), the production of MENTS compressed air and gas pumping stations (air supply or room ventilation). 7 Venfilter [email protected] 237 Tel +34 937 862 607 www.venfilter.com MOTORS Fax +34 937 862 493 AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

0 Motors and turbines INFORMA- EFFICACY – PARTICLE SIZE IN MICRONS TION Filter CTG324660-k1 + CTG445324660-K1 Efficacy in % terms 1 (Cylindrical + Conical) Aerosol Test: DEHS PRE- Filtration Surface: Synthetic and cellulose mixture. FILTERS Air Flow: 0.722 m3/s. 2 Initial Efficacy: 163 Pa Efficacy after the1st dust load: 250 Pa PAINTINGS Efficacy after the 2nd dust load: 350 Pa BOOTHS Efficacy after the 3rd dust load: 450 Pa Particle size (microns) 3 Filter CTG324660-SGF9 + CTG445324660-SGF9 Efficacy in % terms Aerosol Test: (Cylindrical + Conical) COMFORT Filtration Surface: DEHS Particle size (microns) PRODUCTS Air Flow: Mixture of synthetic fibers impregnated with resin and fiberglass Efficacy in % terms 4 Filter 0.722 m3/s. Aerosol Test: Particle size (microns) EPA/HEPA Filtration Surface: Initial Efficacy: 146 Pa /ULPA Air Flow: Efficacy after the1st dust load: 250 Pa Efficacy in % terms Efficacy after the 2nd dust load: 350 Pa 5 Filter Efficacy after the 3rd dust load: 450 Pa Aerosol Test: HIGH Filtration Surface: CTG324660-F9 + CTG445324660-F9 (Cylin- TEMPERA- Air Flow: drical + Conical) TURE 238 DEHS 6 Fiberglass 0.722 m3/s. EQUIP- MENTS Initial Efficacy: 137 Pa Efficacy after the1st dust load: 250 Pa 7 Efficacy after the 2nd dust load: 350 Pa Efficacy after the 3rd dust load: 450 Pa MOTORS AND CTG324660-H10 + CTG445324660-H10 (Cylindrical + Conical) TURBINES DEHS Hepa fiberglass. 8 0.722 m3/s. ADSOR- Initial Efficacy: 143 Pa TION AND Efficacy after the1st dust load: 250 Pa DESODO- Efficacy after the 2nd dust load: 350 Pa RIZATION Efficacy after the 3rd dust load: 450 Pa 9 Particle size (microns) INTER- Venfilter [email protected] NATONAL Tel +34 937 862 607 www.venfilter.com NORMATI- Fax +34 937 862 493 VE

Motors and turbines 0 TECHNICAL CHARACTERISTICS INFORMA- TION TG Filters are available in a wide range of sizes in order to meet the requirements of our clients, and may be supplied in the two most commonly-used formats: CYLINDRICAL AND CONICAL. 1 The most commonly-used cartridge heights are: PRE- • Cylindrical: 560, 600, 660 and 700 mm FILTERS • Conical: 660 mm. 2 Venfilter Reference: CTG324560-SGF9 PAINTINGS External Diameter 324 mm BOOTHS Interior Diameter Height: 215 mm 3 Filtration media: 560 mm Mixture of synthetic fibers impregnated with resin COMFORT Filtration surface and fiberglass PRODUCTS 17 m2 4 Nominal flow: 950 m3/h. EPA/HEPA Efficacy 96% Ashrae Dust Spot /ULPA Class according to EN 779: F9 5 Venfilter Reference: CTG324660-F9 HIGH TEMPERA- External Diameter 324 mm Interior Diameter 215 mm TURE Height: 660 mm Filtration media: fiberglass 6 Filtration surface 20 m2 1100 m3/h. EQUIP- Nominal flow: MENTS 98% Ashrae Dust Spot Efficacy 7 F9 Class according to EN 779: MOTORS AND Venfilter Reference: CTG324660-K1 TURBINES External Diameter 324 mm Interior Diameter 215 mm 8 Height: 660 mm Filtration media: Mixture of cellulosic and synthetic fibers impregna- ADSOR- ted with resin. TION AND Filtration surface 20 m2 DESODO- Nominal flow: RIZATION 1100 m3/h. 9 Efficacy 95% Ashrae Dust Spot INTER- Class according to EN 779: F8 NATONAL NORMATI- Venfilter [email protected] 239 Tel +34 937 862 607 www.venfilter.com VE Fax +34 937 862 493

0 Motors and turbines INFORMA- TION 1 TECHNICAL CHARACTERISTICS PRE- Venfilter Reference: CTG324700-SGF9 FILTERS External Diameter 324 mm 2 Interior Diameter 215 mm Height: 700 mm PAINTINGS Filtration media: Mixture of synthetic fibers impregnated with resin BOOTHS and fiberglass Filtration surface 22 m2 Nominal flow: 1100 m3/h. Efficacy 96% Ashrae Dust Spot 3 Class according to EN 779: F9 COMFORT PRODUCTS 4 Venfilter Reference: CTG324862-K1 EPA/HEPA Installation Bayoneta /ULPA Exterior Diameter 324 mm Interior Diameter 215 mm 5 Height: 862 mm Filtration media: Mixture of cellulosic and synthetic fibers HIGH impregnated with resin. TEMPERA- Filtration surface 25 m2 Nominal flow: TURE 1360 m3/h. 6 Efficacy 95% Ashrae Dust Spot Class according to EN 779: F8 EQUIP- Venfilter Reference: CTG404/360660-K1 MENTS Superior Platform 404 / 324 7 Exterior Diameter 324 mm Interior Diameter 215 mm MOTORS Height: 660 mm AND Filtration media: Mixture of cellulosic and synthetic fibers impregnated with resin. TURBINES Filtration surface 20 m2 Nominal flow: 8 1100 m3/h. ADSOR- Efficacy 95% Ashrae Dust Spot TION AND DESODO- Class according to EN 779: F8 RIZATION Venfilter 9 Tel +34 937 862 607 Fax +34 937 862 493 INTER- 240 [email protected] NATONAL www.venfilter.com NORMATI- VE

Motors and turbines 0 Filter References: INFORMA- CTG324660-K1 + CTG445324660-K1 (Cylindrical + Conical) Filtration TION Surface: Mixture of cellulose and synthetic fibers. 1 Exterior Diameter 1 445 mm PRE- Interior Diameter 1 332 mm FILTERS Exterior Diameter 2 324 mm 2 Interior Diameter 2 215 mm PAINTINGS BOOTHS Total Height: 1345 mm 3 Filtration media: Mixture of cellulose and synthetic fibers impregnated with resin. COMFORT PRODUCTS Filtration surface 48 m2 4 Nominal flow: 2600 m3/h. EPA/HEPA Initial Pressure Difference in Pa 163 /ULPA Efficacy 97% Ashrae Dust Spot 5 Class according to EN 779: F9 HIGH TEMPERA- Filter References: CTG324660-SGF9 + CTG445324660-SGF9 (Cylindrical + Conical) Filtra- TURE tion Surface: Mixture of synthetic fibers impregnated with resin and fiberglass 6 Exterior Diameter 1 445 mm EQUIP- MENTS Interior Diameter 1 332 mm 7 Exterior Diameter 2 324 mm MOTORS Interior Diameter 2 215 mm AND Total Height: 1345 mm TURBINES Filtration media: Mixture of synthetic fibers impreg- 8 Filtration surface nated with resin and fiberglass 45 m2 ADSOR- TION AND Nominal flow: 2600 m3/h. DESODO- RIZATION Initial Pressure Difference in Pa 146 9 Efficacy 96% Ashrae Dust Spot INTER- Class according to EN 779: F9 NATONAL NORMATI- Filter References: Filter References: CTG324660-F9 + CTG445324660-F9 (Cylindrical + Conical) Filter CTG324660-H10 + CTG445324660-H10 (Cylindrical + Conical) Filter Surfa- VE Surface: Fiberglass. ce: Hepa fiberglass. Exterior Diameter 1 445 mm Exterior Diameter 1 445 mm Interior Diameter 1 332 mm Interior Diameter 1 332 mm Exterior Diameter 2 324 mm Exterior Diameter 2 324 mm Interior Diameter 2 215 mm Interior Diameter 2 215 mm Total Height: 1345 mm Total Height: 1345 mm Filtration media: Fiberglass. Filtration media: Hepa fiberglass. Filtration surface 45 m2 Filtration surface 45 m2 Nominal flow: Nominal flow: Initial Pressure Difference in Pa 2600 m3/h. Initial Pressure Difference in Pa 2600 m3/h. Efficacy 137 Efficacy 143 Class according to EN 779: 98% Ashrae Dust Spot Class according to EN 779: 100% Ashrae Dust Spot F9 E10 Operational limit: - Pressure Drop of recommended final load: 1500 Pa Venfilter [email protected] 241 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Adsortion and desodorization INFORMA- TION 1 We protect all environments PRE- Global keyFILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 242 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com EPA/HEPA Fax +34 937 862 493 /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Adsortion and desodorization 0 ¿Por qué la filtración molecular? INFORMA- TION En el mundo de la industria representa una importante amenaza la polución molecular ya que el aire que res- piramos está inevitablemente contaminado por la contaminación química invisible. 1 La industria, los vehículos and los lugares dónde se genera energía emiten sustancias químicas que continua- PRE- mente desafían nuestro medio ambiente. Dentro de edificios o en lugares de trabajo and ocio, las personas FILTERS están expuestas a los contaminantes químicos, éstos pueden estar dispersos and provocar dyears ambientales en áreas amplias, además de dañar a las personas and al medio ambiente en general, la contaminación at- 2 mosférica puede causar dyears irreversibles a objetos aparentemente inertes, como artefactos and pinturas de museos. Aplicaciones Típicas PAINTINGS BOOTHS CONFORT PROCESO LIMPIO SEGURIDAD and PROTECCIÓN 3 APLICACIÓN CONTAMINANTE APLICACIÓN CONTAMINANTE APLICACIÓN CONTAMINANTE COMFORT PRODUCTS Ventilación de Productos químicos Microelectrónica Ácidos Fabricación Isocianatos. edificios de fuentes externas: Bases, amoníaco de espuma de 4 - Humos por tráfico Condensables, VOC poliuretano. vehicular Dopantes EPA/HEPA - Generación de energía /ULPA - Incineración de residuos 5 - Industria HIGH Ventilación de Productos químicos de Museos Dióxido de azufre, Generación de Yodo-131 TEMPERA- edificios fuentes internas: Pasta and papel óxidos de energía nuclear - Decoración de nitrógeno, ozono Huele a basura TURE materiales Estaciones de - Productos de limpieza Dióxido de azufre transferencia de Diversos agentes - Fotocopiadoras sulfuro de residuos. tóxicos - Retardantes de llama hidrógeno Fabricación de cloro plaguicidas Mecanismos de control 6 Existen diferentes procesos involucrados en el mecanismo de eliminación general de las moléculas de gas o EQUIP- vapor del aire. Es importante comprender cómo están involucrados en cada aplicación and cómo pueden verse MENTS influenciados positiva o negativamente por otros factores. En todas las aplicaciones es esencial para una solu- ción efectiva, que tengan un material con un área de superficie interna alta, una estructura de poro adecuada 7 and una química de superficie apropiada. Factores que afectan en el rendimiento MOTORS AND - Materia prima - Temperatura TURBINES - Humedad Relativa - Concentración 8 - Medios impregnados ADSOR- Venfilter TION AND Tel +34 937 862 607 DESODO- Fax +34 937 862 493 RIZATION 9 [email protected] 243 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Adsortion and desodorization INFORMA- TION General Information 1 Activated charcoal, which is practically pure charcoal with an enormous porosity, is able to trap certain types of molecules in its walls due to a physiochemical phenomenon known as ‘adsorption’. In this process, the activated PRE- charcoal is the ‘adsorbent’ and the molecule retained is the ‘adsorbate’. In order to be effectively adsorbed into an FILTERS activated charcoal material, an adsorbate must have the following characteristics: 2 (a) It must be able to fit inside the charcoal pores. (b) The diameter of the molecule must not be less than 20% of the diameter of the majority of the PAINTINGS activated charcoal pores. BOOTHS (c) It must have a molecular weight greater than 55. (d) Be non-polar or only slightly polar. 3 Most organic compounds fulfil these requirements, which is why activated charcoal is used in gas and liquid purifi- cation processes, where the contaminants are organic molecules. COMFORT PRODUCTS In the case of gas purification, the possibility exists of subjecting the charcoal to a treatment that allows it to re- tain molecules that do not fulfil these characteristics (a), (b) and (c), as in the case of mineral acids (hydrochloric, 4 sulphuric, nitric, phosphoric, etc.), ammonia, low-molecular weight amines, formaldehyde, isopropyl alcohol, mer- cury, etc. The treatment consists of binding a reagent to the surface of the charcoal, which then reacts with the molecule to be retained. This means that the activated charcoal provides the surface area and the retention is made by chemical adsorption or ‘chemisorption’. Applications EPA/HEPA Air conditioning /ULPA Solvent recovery Industrial pollution control 5 Vehicle canisters Masks HIGH Kitchen hoods TEMPERA- Compressed air purification Refrigerator deodorisation TURE Hydrogen purification (retaining hydrocarbons and organic chlorides) Helium purification 6 Acetylene purification (retaining arsine, phosphine, stibine or benzene) Carbon monoxide purification (retaining toluene) Carbon dioxide purification (retaining benzene toluene from compressor oil) EQUIP- Charcoal Particle Size MENTS 7 Activated charcoal may be manufactured in three different manners, in accordance with its form: Granular MOTORS Pelletized AND Powdered In air and gas purification the first and second forms are used, in the following sizes: TURBINES 4x10 for beds with over 5 cm. thickness 12x20, 14x30 for beds with thicknesses between 2 and 5 cm (e.g. masks) 8 In the case of pellet charcoal: 3 or 4 mm in diameter, for beds with thicknesses over 5 cm. ADSOR- Less than 3 mm for with thicknesses between 2 and 5 cm. TION AND DESODO- Venfilter RIZATION 244 Tel +34 937 862 607 [email protected] 9 Fax +34 937 862 493 www.venfilter.com INTER- NATONAL NORMATI- VE

Adsortion and desodorization 0 Conditions that reduce adsorption capacity INFORMA- TION High Temperature 1 High humidity levels (relative to air) Moisture in the charcoal PRE- FILTERS Adsorber Design Parameters Surface speed of air or gas: must be between 10 and 30 m per min. 2 Contact time: divide the volume of the charcoal bed (litres) by the volumetric air or gas flow (litres per min.). Recommended rates: PAINTINGS 0.1 second. Low concentrations BOOTHS 2 to 7 seconds. Other cases Hourly renewals: 6 to 30 air changes in order to maintain a well-ventilated location. Index adsorption capacity of activated charcoal in gas phase 3 Of the pollutants listed, some are specific chemical compounds. Others represent a class of compounds and others are mixtures of a variable composition. The capacity of the activated charcoal for odors varies with respect to their COMFORT concentration, in addition to air humidity and temperature. PRODUCTS A= High capacity (the charcoal retains 20% to 50% of its weight). 4 B= Satisfactory capacity (retains 10% to 25% of its weight). C= Sufficient capacity to provide proper service under specific operational conditions, which must be analysed. D= Low capacity. The activated charcoal does not provide a proper service under ordinary operational conditions. Essential oils A Borane B Diethylamine * B EPA/HEPA Rancid oils A Brea tar and tar A Diethyl ketone A /ULPA A Dimethylaniline Acetaldehyde * C Bromine A Dioxane 5A Amide Acetate A Ethyl bromide C Sulphur dioxide * Butyl Acetate A Hydrogen bromide * B Charcoal dioxide * A Cellosolve acetate A Methyl bromide B Nitrogen dioxide * C C Dipropyl ketone D Ethyl acetate A Butadiene A Charcoal disulphide C HIGH Isopropyl acetate A Butane A Ethane A TEMPERA- Methyl cellosolve acetate A Butanone C Ether A C Amyl ether TURE B Butyl ether Methyl acetate B Butyl cellosolve A Dichloroethene 6D Propyl acetate A Butylene * C Ethyl ether Acetylene * D Butyne * A Isopropyl ether B A Methyl ether A Acetone B Butyraldehyde * A Propyl ether A Acetic acid A Cellosolve A Ethyl mercaptan A EQUIP- Acrylic acid A Hydrogen cyanide * B Ethylamine * B MENTS A Ethylbenzene Butyric acid A Cyclohexane A Ethylene chlorhydrin 7A Caprylic acid A Cyclohexanol A Ethylene * Carbolic acid A Cyclohexanone A Eucalyptol B Formic acid * B Cyclohexene A Phenol AA A Fertilisers Lactic acid A Chorine B Fluorotrichloromethane B MOTORS Nitric acid B Chlorobenzene A AND Palmitic Acid A Chlorobutadiene A TURBINES Propionic Acid A Chloroform 8D Sulphuric acid A Chloro-pro-propane Uric acid A Chloropicrin A Valeric acid A Butyl chloride AA Methyl acrylate A Ethyl Chloride B ADSOR- TION AND DESODO- RIZATION Venfilter 9 Tel +34 937 862 607 Fax +34 937 862 493 [email protected] 245 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Adsortion and desodorization INFORMA- Ethyl acrylate A Hydrogen chloride * C Hydrogen fluoride * C TION Acrylonitrile A Methylene Chloride A Formaldehyde C Acrolein * B Methyl Chloride B Ethyl format B 1 Adhesives A Propyl Chloride A Methyl Form B Masking agents A Vinyl chloride B Phosgene B PRE- Camphor A Liquid fuels A Ripening fruit A FILTERS Amyl alcohol A Cleaning Compounds A Gangrene A Butyl alcohol A Cresol A Car exhaust gas B 2 Wood Alcohol B Crotonaldehyde A Corrosive gases B Ethyl alcohol A Dean A Toxic gases B PAINTINGS Isopropyl alcohol A Deodorants A Gasoline A BOOTHS Methyl alcohol B Scrap Wastes A Burned fat A Propyl alcohol A Industrial waste B Lubricating greases and oils A 3 Valeric aldehyde A Disinfectants A Heptane A Tar A Detergents A Heptylene A COMFORT Amines * C Dibromoethane A Hexane B PRODUCTS Ammonia * C Dichlorobenzene A Hexylene * B Anaesthetics B Dichlorodifluoromethane A Hexane * B 4 Acetic anhydride A Dichloroethane A Hydrogen D Aniline A Dichloroethylene A Smoke A EPA/HEPA Anticópricos A Dichloromonofluoromethane B Incense A /ULPA Aroma of flowers A Dichloronitroethane A Indole A Food scents A Dichloropropane A Irritants A 5 Aromatisers A Dichlorotetrafluroethane A Isophorone A Alcoholic drinks A Ethyl dichloride A Isoprene * B HIGH Soaps A Smell of melon A Waste products B TEMPERA- Sour milk A Smell of plastic A Decomposing products A Calcined materials A Smell of cheese A Products used for embalming A TURE Menthol A Animal odor B Products for radiation protection C Mercaptans (thiols) A Smell of tobacco smoke A Propane C 6 Mercury * A Popcorn / sweets Propyl mercaptan A Methane D smell A Propylene * C EQUIP- Methyl butyl ketone A Body odor A Tip C MENTS Methyl ethyl ketone A Bird odors A Propionaldehyde * B Methyl isobutyl ketone A Bath odors A Putrescine A 7 Methyl mercaptan A Butcher’s shop smells B Kerosene A Methyl cellosolve A Citrus and other Organic chemicals A MOTORS Methylcyclohexane A fruit A Resins A AND Methylcyclohexanol A Cooking odors A Burned blood A Methylcyclohexanone A Cooking odors A Hydrogen Selenide * C TURBINES Methyl Chloroform B Combustion smells B Ethyl silicate A Mould B Drain odors A Smog A 8 Monochlorobenzene A Embalming odors A Bleaching solutions * B Monofluorotrichloromethane A Hospital odors A Solvents B ADSOR- Styrene monomer A Photo development lab smell B Sweat A TION AND Charcoal monoxide D Liquor smell A Dimethyl sulphate A DESODO- Coal tar naphtha A Makeup smell A Hydrogen sulphide * B RIZATION Petroleum naphtha A Pet odors A Substances in putrefactionDe- B Naphthalene A Decayed paper odors A composing substances A 9 Naphthalene A Smell of fish A Tetrachloroethane A Nicotine A Smells of paint A Tetrachlorethylene A Nitro benzene A Cleaning product Carbon tetrachloride A Nitro ethane A smells A Toluene A Nitro-glycerine A Medicinal odors A Tolidine A Nitromethane A Mixed smells A Trichloro ethane A INTER- 246 Venfilter [email protected] NATONAL Tel +34 937 862 607 www.venfilter.com NORMATI- Fax +34 937 862 493 VE

Adsortion and desodorization 0 INFORMA- TION Nitropropane A Persistent odors A Trichlorethylene A Nonane A Stale odors A Sulphur trioxide * 1B Octalene A Ethylene oxide B Turpentine Octane A Mesityl oxide A Urea A Odorizes A A Tarmac fumes A Garlic smell A Ozone A Animal odor B B Paradichlorobenzene A Varnish fumes A PRE- Smell of dead animals A Adhesives A Fuel fumes C FILTERS Smell of roast meat A Onion smell A Pentane B Diesel fumes A Sour cabbage smell A Pentanone A Exhaust fumes 2B Smell of decomposed food A Pen ethylene * B Vinegar Smell of burnt food A Pentene * B B Xylene A Odor of rubber A A Smell of cigarette smoke A Perchlorethylene A Iodine A Perfumes and cosmetics A Iodoform A PAINTINGS Pyridine A Hydrogen Iodide * B BOOTHS Pollen B 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 247 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Adsortion and desodorization Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com INFORMA- 248 Fax +34 937 862 493 TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE