Venfilter-EN-imprenta-2020 02 07 VERSION 20 digital

Adsortion and desodorization 0 CARB ORGANIQUES INFORMA- TION Active Carbon Filters 1 It is a thermally activated anthracite carbon. In multi- bed systems, it acts as a refining filter to remove high PRE- molecular weight compounds. FILTERS Technical features 2 Toluene adsorption capacity at 10ppmv:> 14% by weight. PAINTINGS Benzene adsorption capacity at 100ppmv::> 12% by weight. BOOTHS Density: 480 ± 30 Kg / m3 Pellet diameter: 3 or 4mm 3 Hardness:> 97% Humidity: <4% COMFORT Gas removal process: Adsorption. PRODUCTS Contaminants: Hydrocarbons, chlorine, volatile organic compounds and siloxanes. 4 Relative humidity: 10-95% Yield: Up to 99 EPA/HEPA Temperature: -20ºC to 50ºC /ULPA Ventajas 5 - Does not contain impregnation. HIGH - Large surface area TEMPERA- - Greater gas adsorption capacity. TURE Packaging 6 Available in: - 25Kg bags EQUIP- MENTS Quality Control 7 Subject to the following quality controls: - H2S capacity MOTORS - Moisture content AND Media handling TURBINES It is recommended that installers wear dust masks, goggles, and rubber gloves. 8 Waste generated by handling must be disposed of and recycled according to local, state and national regulations. Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 249 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Adsortion and desodorization INFORMA- TION CARB ORGANIQUES MAX 1 Active Carbon Filters PRE- Consists of an anthracite origin virgin Carbon with a grade FILTERS of CTC 60, wich is thermally activated to obtain a large surface area and a high gas removal capacity. Contains 2 no impregnates. Is designed to eliminate hydrocarbons, chlorine and volatile organic compounds (VOC's). PAINTINGS In multiple-bed systems CARB OGANICOS acts as a BOOTHS refining filter to eliminate VOC's with high molecular weight structure. 3 Technical features Surface area : 1050 m2/g CTC: 60% in weight COMFORT Density: 450 ± 30 Kg/m3 PRODUCTS Pellet diameter: 3,4 mm Mechanical strength: >97% Humidity: 4% Gas removal process: Adsorción 4 Pollutants: Hydrocarbons, chlorine, volatile organic compounds and siloxanes Humidity: 10-95% EPA/HEPA Temperature: -20ºC till 50ºC /ULPA Efficiency: Up to 99,9% 5 Advantatges - High capacity HIGH - Low dust TEMPERA- TURE 6 Packaging EQUIP- Is packaged in: MENTS - Bags of 25Kg. 7 Quality control MOTORS Is tested: AND - Titratable Phosphoric Acid - Moisture Content TURBINES - Apparent Density 8 Media handling ADSOR- Installers are recommended to wear dust masks, goggles and ruber gloves. TION AND Waste generated from handling must be disposed of and recycled according to DESODO- local, state and national regulations. RIZATION Venfilter 9 Tel +34 937 862 607 Fax +34 937 862 493 INTER- 250 [email protected] NATONAL www.venfilter.com NORMATI- VE

Adsortion and desodorization 0 CARB FORMALDEHYDES INFORMA- TION Active Carbon Filters 1 Is a granulated product presented as cylindrical pellets based on natural clays which have been extruded together PRE- with potassium permangante (KMnO4) as active principle. FILTERS The KMnO4 in CARB FORMALDEHYDES is responsible for the removal of the target gases, principally ethylene and 2 formaldehyde, thanks to a chemical reaction on the active surface of the absorbent. PAINTINGS BOOTHS Technical features 3 Ethylene absorption capacity: Up to 4.5% (L/Kg media) Ethanol absorption capacity: Up to 20% (w/w) COMFORT HCHO absorption capacity: Up to 8% (w/w) PRODUCTS Density: 840 ± 20 Kg/m3 Pellet diameter : 3,4 mm 4 Radial crush strength: 3 KgF LOA (Loss On Attrition): <5% EPA/HEPA Humidity: 20% /ULPA Target pollutants: Ethylene, Formaldehyde and VOCs Humidity: 10-95% 5 Temperature: -20ºC till 50ºC Efficiency: Up to 99,9% HIGH TEMPERA- Application TURE - Extraordinary ethylene elimination and air cleaning in fresh produce transport and/or storage enclosures, thus extending the post-harvest life 6 of the products. - Effective removal of other light odorous volatile organic compounds EQUIP- (VOCs), such as short-chain alcohols or formaldehyde (HCHO). MENTS Packaging 7 Is packaged in: MOTORS - Bags of 25Kg. AND Quality control TURBINES Is tested: 8 - Ethylene absorption capacity and efficiency - Moisture Content ADSOR- TION AND Media handling DESODO- RIZATION Installers are recommended to wear dust masks, goggles and ruber gloves. Waste generated from handling must be disposed of and recycled according to 9 local, state and national regulations. Venfilter [email protected] 251 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorization INFORMA- CARB ACIDS TION Active Carbon Filters 1 PRE- Is an activated carbon of high purity and large surface area. FILTERS A chemical impregnated neutralizes acidic compounds with effectiveness. 2 Technical features PAINTINGS BOOTHS Specific surface: 1050 m2/g H2S Removal capacity: Up to 26% in weight 0.14 gr/cc 3 Density: 540 ± 30 Kg/m3 Pellet diameter: 4mm COMFORT Mechanical strength: 97% PRODUCTS Humidity: 15% Ignition temperature: 280 ºC/ 536ºF 4 Gas removal process: Chemisorption Target pollutants: H2S, SO2, Mercaptanos, Ácidos CI2 Humidity(%): 10-95 Temperature: -20ºC till 50ºC Efficiency(%): Up to 99,9 EPA/HEPA Advantages /ULPA - Broad spectrum of pollutants removal. 5 - Higher loading capacity = longer life. - Resistance to high moisture content. HIGH TEMPERA- Application TURE 6 Is suitable for a wide range of applications: waste water treatment plants, corrosion control, food processing, EQUIP- waste handling, museums, archives, datacenters and MENTS more. 7 Packaging Is packaged in: - Bags of 25Kg. (55Ibs) MOTORS Quality control AND Is submitted to the following quality control test: TURBINES - H2S Capacity - Moisture Content 8 ADSOR- Media handling [email protected] TION AND www.venfilter.com DESODO- Installers are recommended to wear dust masks, goggles and ruber gloves. RIZATION Waste generated from handling must be disposed of and recycled according to local, state and national regulations. 9 Venfilter INTER- Tel +34 937 862 607 NATONAL 252 Fax +34 937 862 493 NORMATI- VE

Adsortion and desodorization 0 CARB AMMONIA INFORMA- TION Active Carbon Filters 1 Is a bituminous active carbon impregnated with phosphoric acid. Typical applications include odor and PRE- irritants absorption derived from sewer system, fertilizers, FILTERS printers, cleaners, urine and fish processing. 2 Technical features PAINTINGS Specific area: 1050 m2/g BOOTHS NH3 Removal capacity: Up to 10% in weight Density: 580 ± 30 Kg/m3 3 Pellet diameter: 3 o 4 mm Mechanical strength: >98% COMFORT Humidity: 15% PRODUCTS Gas removal process: Chemisorption Contaminantes: 4 - Ammonia, amines and volatile organic compounds. - Dimethylmine, isobuthylamine, t-butyl amine, di-n- EPA/HEPA propylamine, Isopropyl amine, Tetramethyl, n-butyl /ULPA amine, Ethylamine, Methylamine, Triethylamine, Cyclo exylamine, Ethylenediamine, Methylethylamine, 5 Trimethylamine, Diethylamine, n-Propylamine, toluidina, Hexamethylendiamine, Sec-butylamine y Phenylethylamine. HIGH Humidity: 10-95% TEMPERA- Temperature: -25ºC till 50ºC Efficiency: Up to 99,9% TURE Advantatges 6 - Specific for basic gases EQUIP- - Combined adsorption on different compounds MENTS Packaging 7 Is packaged in: MOTORS - Bags of 25Kg. AND Quality control TURBINES Is tested: 8 - Titratable Phosphoric Acid - Moisture Content ADSOR- TION AND Media handling DESODO- RIZATION Installers are recommended to wear dust masks, goggles and ruber gloves. Waste generated from handling must be disposed of and recycled according to 9 local, state and national regulations. Venfilter [email protected] 253 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorization INFORMA- CARB MIXED TION Active Carbon Filters 1 It is a high purity, large surface activated carbon. PRE- The impregnated chemical principle neutralizes acidic FILTERS compounds very effectively 2 Technical features PAINTINGS CARB MIXTO CARB ISORB CARB Units BOOTHS MAX ORGANIQUES m2/g Specific surface % in weight 3 16 1052 H2S Removal % in weight COMFORT Capacity 6 60 PRODUCTS % in weight SO2 Removal 2,5 430 ± 30 4 Capacity % in weight 8 3,4 EPA/HEPA NO Removal >97 % in weight /ULPA Capacity 4 4 % in weight 5 NO2 Removal 840 ±20 Adsorption Capacity g/l HIGH 2,3 o 4 10-95 mm TEMPERA- HCHO Removal 4 kg of strength -20ºC till 50ºC % Capacity % TURE 15 Up to 99,9 CCI4 Removal Chemisorption % 6 Capacity ºC Density 10-95 % EQUIP- -20ºC till 50ºC MENTS Pellet diameter Up to 99,9 7 Hardness MOTORS Humidity AND Gas removal TURBINES process Humidity 8 Temperature ADSOR- TION AND Efficiency DESODO- RIZATION Advantatges 9 - Reduces the number of pellets needed - Changes color as it is worn INTER- NATONAL Application NORMATI- - Corrosion control VE - Odor control Packaging Is packaged in: - Bags of 25Kg. Quality control Is submitted to the following quality control test: - H2S Capacity - Moisture Content Media handling Installers are recommended to wear dust masks, goggles and ruber gloves. Waste generated from handling must be disposed of and recycled according to local, state and national regulations. Venfilter 254 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com

Adsortion and desodorization 0 CARB ISOTOPES INFORMA- TION Active Carbon Filters 1 It is based on activated carbon of the highest purity and impregnated with 4% KI to provide excellent adsorption PRE- properties. FILTERS It is designed to remove mercury and iodine compounds. It is also effective in removing formaldehyde and organic 2 aldehydes, sulfur compounds, mercaptans, DMDS, SO2, and H2S. PAINTINGS BOOTHS Technical features 3 Surface area: 1050 m2 / g Methyl mercaptan adsorption capacity: Up to 17% by weight COMFORT Dimethyl sulfide adsorption capacity: Up to 23% by weight PRODUCTS SO2 adsorption capacity: Up to 13% by weight H2S adsorption capacity: Up to 19% by weight 4 Density: 580 ± 30 Kg / m3 Pellet diameter: 3 or 4 mm EPA/HEPA Hardness: 97% /ULPA Humidity: 15% Gas removal process: Chemisorption 5 Contaminants: - Mercury HIGH - Radioactive iodine and organic iodine compounds TEMPERA- - Formaldehyde and organic aldehydes - Sulfur compounds, mercaptans, DMDS, SO2 and H2S TURE Humidity (%): 10-95 Temperature: -20ºC to 50ºC 6 Performance: Up to 99.9 EQUIP- Advantatges MENTS - Wide range of gas adsorption. 7 - High load capacity = long life. - Avoid side effects caused by the toxic properties of mercury. MOTORS AND Packaging TURBINES Available in: - 25Kg bags 8 Quality control ADSOR- TION AND Subject to the following quality controls: DESODO- - KI content RIZATION - Moisture content 9 Media handling It is recommended that installers wear dust masks, goggles, and rubber gloves. Waste generated by handling must be disposed of and recycled according to local, state and national regulations. Venfilter [email protected] 255 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorization INFORMA- CARB FORMALDEHYDES TION (SPHERE) Active Carbon Filters 1 Spherical Alumina based media. Impregnated with PRE- Potassium Permanganate during manufacturing. FILTERS Uses the combined action of physical and chemical processes to control gas emissions. Oxidized gases are 2 converted into harmless products such as CO2, water and salts. PAINTINGS Is designed to efficiently eliminate pollutants such as acidic BOOTHS gases, Nitrogen and Sulphur containing compounds, and low molecular weight volatiles. 3 Techenical features COMFORT H2S Removal capacity: 14% in weight PRODUCTS SO2 Removal capacity: 7% en peso NO Removal capacity: 5% en peso 4 NO2 Removal capacity: 21% en peso HCHO Removal capacity: 2,5 en peso EPA/HEPA Density: 760 ± 30 Kg/m3 /ULPA Pellet diameter: 3-5 mm Humidity: 25% (max.) 5 Attrition: 5% (max.) Crush strength: 2 KgF HIGH Humidity: 10-95% TEMPERA- Temperature: -20ºC till 50ºC Efficiency: 99.5% min TURE Advantages 6 - Wide spectrum of gas adsorption. - Best ''polishing'' method to comply with the stringiest outlet gas concentrations. - Higher loading capacity - Visual indicator when product is consumed Application EQUIP- Is recommended for a wide range of applications such as waste water tratment MENTS plants, pulp and paper plants, airports, chemical plants, refineries, exhaust gases and more. 7 Packaging MOTORS AND Is packaged in: - Boxes of 22.7Kg. TURBINES Quality control 8 All Batches are Inspected according to our ISO 2015 procedures, including ADSOR- active ingredients content, humidity, bulk density, mechanical strenght and TION AND abrasion. DESODO- RIZATION Media handling 9 Installers are recommended to wear dust masks, goggles and ruber gloves. Waste generated from handling must be disposed of and recycled according to local, state and national regulations. INTER- 256 Venfilter [email protected] NATONAL Tel +34 937 862 607 www.venfilter.com NORMATI- Fax +34 937 862 493 VE

Adsortion and desodorization 0 MIXED CARB SPHERE INFORMA- TION Active Carbon Filters 1 Es una mezcla de CARB FORMALDEHYDES/E y carbón activado CARB ORGANIQUES. Esta mezcla ofrece en (%): PRE- 70-30,50-50 o 30-70, con una densidad a granel 667,605 o FILTERS 543 Kg/m3. 2 Technical features PAINTINGS CARB MIXTO CARB FORMALDEHYDES CARB ORGANIQUES Units BOOTHS SPHERE 1052 m2/g Specific surface % in weight 3 16 60 H2S Removal % in weight COMFORT capacity 6 430 ± 30 PRODUCTS % in weight SO2 Removal 2,5 3,4 4 capacity >97 % in weight 8 EPA/HEPA NO Removal 4 % in weight /ULPA capacity 4 Adsorption % in weight 5 NO2 Removal 840 ±20 10-95 capacity -20ºC till 50ºC g/l HIGH 2,3 o 4 mm TEMPERA- HCHO Removal 4 kg of f/cm up to 99 % capacity % TURE 15 CCI4 Removal Chemisorption % capacity ºC Density 10-95 % -20ºC till 50ºC Pellet Diameter up to 99 Hardness Humidity Gas removal process Humidity Temperature Efficiency Advantages 6 The main advantage is that both absorbers complement each other when treating different pollutants. Application EQUIP- MENTS - Corrosion control - Odor control 7 Packaging MOTORS AND Is packaged in: - Boxes of 25Kg. TURBINES Quality control 8 - H2S Capacity ADSOR- - Moisture content TION AND DESODO- Media handling RIZATION It is recommended that installers use dust masks, safety goggles and rubber gloves. Waste 9 generated from handling must be disposed of and recycled according to local, state and national regulations. Venfilter [email protected] 257 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorization INFORMA- CARB MAXTION 1 Active Carbon Filters PRE- Combines a mixture of physical and chemical processes to FILTERS control gas emissions. Oxidized gases are converted into harmless products such as CO2, water and salts. It is designed 2 to eliminate efficiently pollutants such as acidic gases, N- and S- containing compounds and low molecular weight compounds. Brings improved physical properties such as hardness and resisrance against fully saturated atmospheres. Its exhaustion is easily seen since the colour changes from violet to brownish. PAINTINGS Technical features BOOTHS H2S Absortption capacity: Up to 16% (w/w) SO2 Absortption capacity: Up to 6% (w/w) 3 NO Absortption capacity: Up to 2,5% (w/w) NO2 Absortption capacity: Up to 8% (w/w) HCHO Absortption capacity: Up to 8% (w/w) COMFORT Density: 840 ± 20 Kg/m3 PRODUCTS Pellet diameter: 3 o 4 mm Mechanical strength: 4 Kg de f/cm Humidity: 15% 4 Target pollutants: H2S, SO2, NO,NO2, Formaldehyde, Ethylene, HCN, Short-chain alcohols, Organic and inorganic acids, Aldehydes, Light VOCs, Methyl and ethyl mercaptan EPA/HEPA Humidity: 10-95% /ULPA Temperature: -20ºC till 50ºC 5 Efficiency: Up to 99 Application It is especially recommended for a wide range of applications: HIGH wastewater treatment plants, pulp and paper plants, airports, TEMPERA- TURE chemical plants, refineries, gas venting and more. 6 Advantages EQUIP- - Wide spectrum of gases absorption. MENTS - Best polishing method to comply with the stringiest outlet gas concentrations. - Higher loading capacity. 7 - Visual indicator when product is consumed. - Spent media is landfill disposable. Packaging MOTORS Is packaged in: AND - Bags of 25Kg. TURBINES 8 Quality control - H2S absorption capacity ASTM D6646 - Moisture content ADSOR- Media handling TION AND DESODO- Use the PPE (Personal Protective Equipment) when handling solid chemicals: dust mask, safety goggles and RIZATION rubber gloves. Waste generated from handling must be disposed of and recycled according to local, state and national regulations. 9 Venfilter INTER- 258 Tel +34 937 862 607 [email protected] NATONAL Fax +34 937 862 493 www.venfilter.com NORMATI- VE

Adsortion and desodorization 0 CARB SULFUR INFORMA- TION Active Carbon Filters 1 Combines a premium quality activated carbon with a proprietaty blend of catalytic inorganic phase and metal PRE- oxides, which results in an extraordinary hydrogen FILTERS sulfide (H2S) absorption capacity in oxygen-poor streams. Unlike other medias, H2S is not converted to sulfuric acid 2 (H2SO4), but to elemental sulfur (S), which is accumulated in the carbon micropores. PAINTINGS BOIN Carb ODR is also a good absorbent for other acidic BOOTHS gases, such as sulfur dioxide(SO2), methylmercaptan and volatile sulfur compounds (VSCs). 3 Technical features COMFORT PRODUCTS H2S Absorption capacity: Up to 50% (w/w) Mechanical strength: 2 KgF 4 Density: 450 ± 30 Kg/m3 LOA (Loss On Attrition): <10% EPA/HEPA Peller diameter: 3, 4 mm /ULPA Humidity: 15-20% Ignition temperature: 420ºC (799 ºF) 5 Target pollutants: H2S, SO2, Methylmercaptan and VSCs Humidity: 10-95% HIGH Temperature: -20ºC till 50ºC TEMPERA- Efficiency: 99.5%min Maximum bed height: 1,5m (optimum height up to 1m) TURE Application 6 Highly effective in the abatement of odour caused by sulfur compounds (in EQUIP- wastewater tratment plants, pump stations, sewage systems...) as long as MENTS application guidelines are respected 7 Packaging MOTORS Is packaged in: AND - Boxes of 20Kg. TURBINES Quality control 8 - H2S absorption capacity ASTM D6646 - Moisture content ADSOR- TION AND Media handling DESODO- RIZATION Use the PPE (Personal Protective Equipment) when handling solid chemicals: dust mask, safety goggles and rubber gloves. Waste generated from handling must be disposed of and 9 recycled according to local, state and national regulations. Venfilter [email protected] 259 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorization INFORMA- Quebraven Galvanized TION Impregnated carbon 1 Active Carbon Filters PRE- FILTERS 2 Panel filter with metal frame with filter media impregna- Dimensions ted with active carbon. For the prefiltration of central air PAINTINGS treatment, conditioning and ventilation systems for the BOOTHS elimination of gaseous pollutants. 3 Technical features COMFORT Type: Panel filter with metal frame with filter media impreg- PRODUCTS nated with active carbon. Frame: Galvanized steel. 4 Grid: Metallic galvanized on both sides. Filter element: Synthetic media impregnated with activated EPA/HEPA carbon. /ULPA Relative Humidity: 70%. Temperature limit: 55ºC. 5 Advantages HIGH TEMPERA- - Combined particles / molecules filtration. - Low Pressure Dropes. TURE - All dimensions. 6 References Model Dimensions Filter Nominal Initial Unit UxP* Stock* BxHxP Surface flow (m3/h) Pa Volume EQUIP- Reference QMCA 1F MENTS QMCA 592x287x48 (m2) 1500 125 (m3) 1F QM122402CA QMCA 592x287x98 0.7 1700 195 0.008 1F 7 QM122404CA QMCA 592x592x48 1.1 3000 125 0.016 1F QM242402CA 592x592x98 1.3 3400 195 0.016 MOTORS QM242404CA 2.2 0.034 AND *UxP *Stock TURBINES Units per box F: Manufacturer, S: Stock, SL: Limited Stock 8 Venfilter ADSOR- 260 Tel +34 937 862 607 [email protected] TION AND Fax +34 937 862 493 www.venfilter.com DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Adsortion and desodorization 0 Metal Frame activated H Dimensiones INFORMA- Carbon TION B P Active Carbon Filters 1 Filter built using a galvanized steel frame and protected PRE- with a perforated sheet. Designed for the deodorization FILTERS and purification of gaseous pollutants. Some application examples are: In air conditioning machinery, paint booths, 2 air with low concentration of organic solvents, etc. PAINTINGS Technical features BOOTHS Type: Panel filter with metal frame and activated carbon 3 in pellets. Frame: Galvanized steel or aluminum COMFORT Grille: Galvanized metal on both sides. PRODUCTS Filter element: Activated carbon. Charcoal with impreg- nation. 4 Relative Humidity: 70%. Working temperature: Maximum 55ºC. EPA/HEPA /ULPA Advantages 5 - Combined filtration of particles / molecules. - All dimensions. HIGH - Possibility of manufacturing with all the coals in our catalog. A solution for every problem. TEMPERA- - Non-woven membrane that protects from dust. TURE References 6 Code Model Dimensions Type of (Kg) Filter UxP Stock Article BxHxP carbon Carbon surface ** EQUIP- CAMM122401GO CAMM CARB-ORGANIQUES 0.016 1F MENTS CAMM122402GO CAMM 287x592x25 CARB-ORGANIQUES 2 0.034 1F CAMM 592x287x50 CARB-ORGANIQUES 5 1F 7 CAMM242401GO CAMM 592x592x25 CARB-ORGANIQUES 7 0.28 1F CAMM242402GO CAMM 592x592x50 CARB-ORGANIQUES 7 0.30 1F MOTORS CAMM162902GO CAMM 390x730x55 CARB-ORGANIQUES 4 0.35 1F AND CAMM163002GO 405x755x51 8 0.35 TURBINES *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock 8 Instrucciones de instalación ADSOR- TION AND It is recommended that installers wear a dust mask, goggles and rubber gloves. Waste generated by DESODO- handling must be disposed of and recycled according to local, state and national regulations. RIZATION Venfilter [email protected] 261 9 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 INTER- NATONAL NORMATI- VE

0 Adsortion and desodorization H BP INFORMA- Modules PP12 TION Active Carbon Filters 1 The PP12 Module was developed to provide a quick and PRE- clean granulate replenishment method in Ethylclean FILTERS machines for post harvest applications, and also in air purification systems in commercial and industrial 2 applications. It is V-shaped to reduce air resistance. The filter is 100% PAINTINGS recyclable. BOOTHS The module can contain any of the granules of the CARB range. 3 Technical features COMFORT PRODUCTS 4 Dimensions LxHxP: 298x296x296. Designed to be placed two, one next to the other, in a width of 60cm. EPA/HEPA Weight (empty): 1.60 Kg /ULPA Volume: 30 liters Material: 100% recyclable polystyrene 5 Packaging: Cardboard box with protective bag in a group of two units. Working temperature: Maximum 55ºC Relative humidity: 20-95%. Depending on the granulate used Color: black HIGH References TEMPERA- Model Coal type Measurements Volume Weight Coal Total TURE )liters( (empty) weight weight UxC Stock 6 Kg 8,7 11 EQUIP- PP12 CARBACIDOU2 CARB-ACIDS 298x296x296 30 1,6 10,3 2 F MENTS 298x296x296 12,6 12,6 2 F PP12 CARBFORMALDEHYDE CARB- 30 1,6 9,6 7 PP12 CARBMAX FORMALDEHYDE/E 298x296x296 6,9 298x296x296 30 1,6 7,2 14,2 2 F MOTORS CARB-MAX 298x296x296 30 1,6 11,2 2 F AND 298x296x296 30 1,6 8,5 2 F PP12 CARBMIXTOU2 CARB MIXED 30 1,6 8,8 2 F TURBINES PP12 CARBSOUFRE CARB-SOUFRE 8 PP12 CARBORGANIQUES CARB-ORGANIQUES ADSOR- *UxP *Stock TION AND Units per box F: Manufacturer, S: Stock, SL: Limited Stock DESODO- RIZATION 262 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com 9 Fax +34 937 862 493 INTER- NATONAL NORMATI- VE

Adsortion and desodorization 0 Flow data INFORMA- TION Front speed Air Flow Flow per air Contact Pressure Drop (m/s) (m3/h) (m3/h) time (s) (Pa) 1 0.25 80 160 0,640 55 PRE- 0,50 160 320 0,320 83 FILTERS 0,66 213 425 0,241 110 0,75 240 480 0,213 128 2 1,00 320 639 0,160 200 1,25 400 799 0,128 275 PAINTINGS 1,50 480 959 0,107 370 BOOTHS 3 COMFORT PRODUCTS CaidParePssruerseióDnroepninMPPo1d2uPlaoMs oPdPu1le8s Pa 4 Δ P (Pa 70 EPA/HEPA /ULPA 60 5 50 HIGH 40 TEMPERA- 30 TURE 20 6 10 EQUIP- MENTS 0 0 100 200 300 400 500 600 700 800 900 1000 Flow per pair [m3/h[ 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 263 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Adsortion and desodorization INFORMA- Modules PP18 TION Active Carbon Filters 1 PRE- The PP18 Module was developed to provide a fast and clean H FILTERS granulate replenishment method in Ethylclean machines, as well as air purification systems in commercial and 2 industrial applications. It is V-shaped to reduce air resistance. The filter is 100% PAINTINGS recyclable. BOOTHS The module can contain any of the granules of the CARB range. 3 B P COMFORT Technical features PRODUCTS Dimensions LxHxP: 439x296x154. Designed to be placed two, one next to the other, in a 4 width of 60cm. Weight (empty): 1.60 Kg EPA/HEPA Volume: 15 liters /ULPA Material: 100% recyclable polystyrene Packaging: Cardboard box with protective bag in a group of two units. 5 Working temperature: Maximum 55ºC Relative humidity: 20-99%. Depending on the granulate used Color: black References HIGH Model Coal type Measurements Volume Peso Coal Total UxC Stock TEMPERA- PP18 CARBACIDOU2 CARB-ACIDS 439x296x145 )liters( (vacío) weight weight TURE 15 Kg 3,915 5,515 2 F 6,73 2 F 6 1,6 EQUIP- PP18 CARBFORMALDEHIDO CARB- 439x296x145 15 1,6 5,13 7,27 2 F MENTS PP18 CARBMAX FORMALDEHIDSO/E 439x296x145 5,92 2 F 15 1,6 5,67 4,84 2 F 7 CARB-MAX 15 1,6 4,32 15 1,6 3,24 MOTORS PP18 CARBMIXTOU2 CARB MIXED 439x296x145 AND PP18 CARBORGANIQUES CARB-ORGANIQUES 439x296x145 TURBINES 8 *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock ADSOR- 264 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DESODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL NORMATI- VE

Adsortion and desodorization 0 Flow data INFORMA- TION Front speed Air flow Flow per pair Contact Pressure (m/s) (m3/h) (m/3/h) time (s) drop (Pa) 1 0.25 83 0,577 0,50 42 167 0,289 4 PRE- 0,66 83 222 0,217 6 FILTERS 0,75 111 250 0,192 8 1,00 125 334 0,144 9 2 1,25 167 417 0,115 13 1,50 209 501 0,096 18 PAINTINGS 1,75 250 584 0,082 24 BOOTHS 2 292 668 30 2,25 334 751 0,72 37 3 2,5 376 834 0,064 45 2,66 417 888 0,058 53 COMFORT 444 0,054 58 PRODUCTS 4 CaidParePsrseusrieóDnreonp iMn PoPd1u2lPoas MPPod1u2lePsa EPA/HEPA /ULPA 400 350 5 300 Δ P (Pa 250 HIGH 200 TEMPERA- 150 100 TURE 50 6 0 0 EQUIP- MENTS 200 400 600 800 1000 1200 7 Flow per pair [m3/h[ MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 265 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Adsortion and desodorization INFORMA- TION Frame for carbon 1 replaceable cartridge Active Carbon Filters PRE- FILTERS 2 Frame for fitting the active carbon cylinders. PAINTINGSTechnical features BOOTHS Type: Mounting for the cartridges. Frame: Galvanized Steel, Stainless Steel or Plastic. Dimensions 3 Cartridge Fitting system: Fitting of cartridges on the quick bayonet mounting. COMFORT PRODUCTS Advantages 4 - Modular System. EPA/HEPA /ULPA References 5 Reference Model Dimensions No. of Unit Volume Weight (Kg) UxP Stock BxHxP Cartridges (m3) * * HIGH BTCGV1224 BTC-GV 0.02 3 1 F TEMPERA- BTCGV2424 BTC-GV 305x610x75 8 0.03 5 1 F 610x610x75 16 TURE 6 *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- 266 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DESODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL NORMATI- VE

Adsortion and desodorization 0 Replaceable carbon INFORMA- cartridges TION Active Carbon Filters 1 Replaceable carbon cartridges for air entry and exit in PRE- ventilation systems that require imporved odor absorption, FILTERS VOCs and the elimination of gases with low toxicity levels. 2 Technical features Dimensions PAINTINGS Type: Active carbon cylindrical cartridge. BOOTHS Carbon: Impregnated Active Carbon. Joint: Neoprene. 3 Temperature: Should not exceed 45ºC Relative Humidity: Maximum 70% COMFORT Contact time: According to the application it can vary from PRODUCTS 0.1 to 0.2 seconds. 4 CALCULATION OF CONTACT TIME: Ct (sec.) = volume of active carbon (m3) / flow to be treated m3/h seconds. EPA/HEPA /ULPA Example Frame BTCGV2424 is fitted with 16 cartridges. 5 Cartridge CACGV145/450 contains 4.3 kg. Volume of carbon = 16 x 4.3 = 68.8 liters or 0.0688 m3/h HIGH Flow to be treated in the installation 1,200 m3h TEMPERA- CALCULATION TURE Ct(sec.) = 0.0688 / 1200 x 3600 = 0.2 seconds 6 The contact time is 0.2 seconds, the flows would be as follows: EQUIP- CACGV145/250 - 50 m3/h per cartridge MENTS CACGV145/450 - 75 m3/h per cartridge CACGV145/600 - 100 m3/h per cartridge 7 Advantages MOTORS AND - Reloadable cartridges with granulated active carbon. - Moludar system for adaptation to any installation. TURBINES References 8 Reference Model Diameters (mm) Carbon Thickness Carbon Minimum Nominal Initial UxP Stock ADSOR- (Kg) contact flow Pa ** TION AND time (s) DESODO- CACGV145/250 CAC-GV 145x85x250 26 mm. 2,9 (m3/h) 80 1F RIZATION CACGV145/450 CAC-GV 145x85x450 26 mm. 4,3 0,1 100 80 1F CACGV145/600 CAC-GV 145x85x600 26 mm. 5,7 0,1 150 80 1F 9 0,1 200 INTER- *UxP *Stock NATONAL Units per box F: Manufacturer, S: Stock, SL: Limited Stock NORMATI- Venfilter [email protected] 267 VE Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Adsortion and desodorization INFORMA- Multicarb TION Active Carbon Filters 1 Multi-dihedral carbon filter with half fold and active PRE- carbon. FILTERS Technical features Dimensions 2 Type: Compact Polyhedral Rigid Bag Filter for deodorisation PAINTINGS associated with a High Efficiency filter. BOOTHS Frame: Polypropylene. Filtering Element: Combines active carbon pellet with 3 synthetic fibers and microfibers with an efficiency of 95%, according to EN 779, F7 and 85%, according EN779, M5. COMFORT Sealant: Polyurethane. PRODUCTS Average Efficiency % (Em): 85% EN 779 Class: F7. 4 Recommended Fine Initial Pa: 250 Pa. EPA/HEPA Temperature: Should not exceed 45ºC /ULPA Retention capacity: Organic substance toluene 952 g. 5 Organic substance n-Butane 117 g. Inorganic substance SO2 350 g. HIGH Inorganic substance HO2 5000 mg. TEMPERA- The retention capacity of the filter is determined for intake TURE concentrations, according to standard E DIN 71460/part 2 6 Accumulation Capacity: (AC Fine/450 Pa) 650 g. EQUIP- Advantages MENTS - Double action: A filtration F-7 class (EN 779: 2002) and adsorption of gases and odors in 7 a single filtering stage. - Contaminants of low concentrations. MOTORS - They don't rust and are incinerable 100%. AND - Interchangeable filters with pre-existing filter bags or compact filters. OZONO PURIFICATION EFFICIENCY: TURBINES CAFP: 90% 8 CAF: 70% ADSOR- References TION AND DESODO- Reference Model Dimensions Average EN 779 Filter Carbon Nominal flow Initial Unit Weight UxP Stock RIZATION BxHxP Efficiency % Class Surface (kg) (m3/h) Pa Volume (Kg) * * CAFP122412F7 CAF 9 CAFP202412F7 CAF 592x287x292 (Em) F7 (m2) 2,1 1700 120 (m3) 5,3 1 S CAFP242412F7 CAF 592x490x292 85% F7 4,3 3,6 2800 120 0,05 8,3 1 S INTER- CAF 592x592x292 85% F7 7,5 4,4 3400 120 0,09 9,2 1 S NATONAL CAFP122412 CAF 592x287x292 85% 9 2,1 1600 100 0,11 5,3 1 F NORMATI- CAFP202412 CAF 592x490x292 4,3 3,6 2400 100 0,05 8,3 1 F CAFP242412 592x592x292 7,5 4,4 3200 100 0,09 9,2 1 F VE 9 0,11 *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock 268 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

Adsortion and desodorization 0 Multicarb G INFORMA- TION Active Carbon Filters 1 Activated carbon filter multi-dihedral. PRE- FILTERS Technical features Dimensions 2 Type: Compact activated carbon filter PAINTINGS Frame: Polypropylene. BOOTHS Filtering Element: Panels activated carbon grains. Sealant: Polyurethane. 3 Temperature: Should not exceed 45ºC. Advantages COMFORT PRODUCTS - Odor Absorption. 4 References EPA/HEPA /ULPA Reference Model Dimensions Carbon (Kg) Nominal Initial Pa Unit Volume Weight UxP* Stock* BxHxP flow (m3) (Kg) 5 CAFG122412GO CAFG 8 1F CAFG202412GO CAFG 592x287x292 12 (m3/h) 70 0,05 13 1F HIGH CAFG242412GO CAFG 592x490x292 16 1700 70 0,09 16 1F TEMPERA- 592x592x292 2800 70 0,11 21 3400 TURE *UxP *Stock 6 Units per box F: Manufacturer, S: Stock, SL: Limited Stock EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 269 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Adsortion and desodorization INFORMA- Policarb TION Active Carbon Filters 1 PRE- Poly-dihedral active carbon filter with a Galvanized flat FILTERS box with panels of granulated active carbon. 2 Technical features PAINTINGS Type: Compact activated carbon filter. Dimensions BOOTHS Frame: Galvanized Steel. Filtering Element: Active carbon dihedral panels. 3 Construction: The frame is made of galvanized steel. Gra- nulated activated carbon panels mounted on the galvanized COMFORT V-shaped frame, forming a highly robust multi-dihedral PRODUCTS structure. To prevent leaks between the galvanized frame and the carbon, a sealing is carried out using polyurethane 4 resin. Sealant: Polyurethane. EPA/HEPA Temperature: Should not exceed 45ºC. /ULPA Advantages 5 - Odor absorption. - Special application: radioactive ions. - Possibility of manufacturing with all the coals in our catalog. References HIGH Reference Model Dimensions Carbon Nominal flow Initial Unit Weight UxP* Stock* TEMPERA- BxHxP (Kg) (m3/h) Pa Volume (Kg) CAF112312GO CAF 1F TURE CAF232312GO CAF 290x595x292 10 1700 60 (m3) 18 1F CAFISO232312 CAF-ISO 595x595x292 20 3400 60 0.05 30 1F 6 CAFISO112312 CAF-ISO 595x595x292 20 3400 80 0.11 30 1F 290x595x292 10 1700 80 0,11 18 EQUIP- 0,05 MENTS 7 *UxP *Stock - other sizes: pleased consult. Units per box F: Manufacturer, S: Stock, SL: Limited Stock MOTORS AND TURBINES 8 ADSOR- 270 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DESODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL NORMATI- VE

Adsortion and desodorization 0 INFORMA- TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 271 INTER- www.venfilter.com NATONAL NORMATI- VE

0 International normative INFORMA- International TION normative 1 Historical Standards PRE- YEAR REFERENCE TYPE OF TEST CLASSIFICATION FILTERS 1968 ASHRAE GRAVI-OPA 1980 GRAVI-OPA EU1 - EU4 / EU5 - EU9 2 1982 EUROVENT 4/5 GRAVI-OPA 1993 AFNOR NF X 44.012 GRAVI-OPA G1 - G4 / F5 - F9 PAINTINGS 2003 G1 - G4 / F5 - F9 + Media descargada BOOTHS CE EN 779 Gravimetric particles G1 - G4 / M5 - F9 Minimum efficiency 2012 CEN EN779:2002 3 2016 Gravimetric particles ePM1, ePM2.5, ePM10 2017 CEN EN779:2012 Gravimetric particles ePM1, ePM2.5, ePM10 COMFORT ISO 16890-1:2016 Gravimetric particles PRODUCTS ISO 16890-3:2017 4 Recommended minimum filter classes, by filter selection, depending on the type of supply air and the outside air quality according to EN16798-3: 2017 EPA/HEPA /ULPA Exterior air Air supply class quality 5 SuP1 SuP2 SuP3 SuP4 SuP5 HIGH (más elevado) (más bajo) TEMPERA- ODA 1 M5 + F7 F7 F7 F7 - TURE ODA 2 F7 + F7 M5 + F7 F7 F7 G3, M5 ODA 3 F7 + F9 F7 + F7 M6 + F7 F7 6 F7 EQUIP- The new standard EN 16798-3: 2017 refers to the standard EN 779, does not provide any recommendation for MENTS the selection of filters classified according to EN ISO 16890-1. 7 Historic Hepa Standards MOTORS YEAR REFERENCE TYPE OF TEST CLASIFICATION AND 1970 FED STD 209E DOP M1 a M7 TURBINES 1990 EN 1822/IEST DOP H10, H11, H12, H13, H14, U15, U16 2010 ISO 14644-1 DOP 8 2011 DOP Class 1 a Class 9 ISO 29463 E10, E11, E12, H13, H14, U15, U16 ADSOR- TION AND Venfilter DESODO- RIZATION Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com 9 272 INTER- NATONAL NORMATI- VE

International normative 0 EN 13053 If bag filters are used then the filtration zone must be INFORMA- Normative at least 10 m² per 1 m² of the equipment transversal TION section. The joints used must be of a closed cell type, Air treatment ventilation. Filters installed in air treat- they must not absorb humidity and they must not form 1 ment units. a nutritive substrate for micro-organisms. Permanent The first filtration stage must be placed on the air inlet fixing for the sealing must be guaranteed (for example, PRE- side, as near as possible to the opening for the outdoor operation from the dirty air side). Filtration sections FILTERS air inlet, so as to keep the air treatment elements as from an inside height of 1,6 m must be set up with an clean as possible. Additional pre-filters G1 to G4 are inspection window (with a minimum interior diameter 2 authorized. The second filtration stage is placed on the of 150 mm) and light inside. outlet side at the start of the air supply duct to keep it In the fan section, for the purposes of setting the Initial PAINTINGS clean. Pa value in the filter on designing the air flow, this BOOTHS When just one filtration stage is used for the supply must be the average of the initial and final drops for system, the minimum that must be installed is a class clean and dust filled filters respectively. 3 F7 filter. Note 1: The volumetric flow variation of air due In the case of using a two filtration stages, the air su- to dust accumulation must be indicated in the COMFORT pply fan must be placed between the first and second technical specifications. If the specific tole- PRODUCTS filtration stages. With the aim of preventing the deve- rances for an application are not mentioned, lopment of microbes in the second stage air filters or <>10% is acceptable based on the average Initial 4 in a superior stage, the relative humidity in the filter Pa. zone must be limited to 90%; temperatures below the The Initial EPA/HEPA dew point temperature must always be avoided. The air Pas in a filter section that is filled with solid particles /ULPA filters must not be placed immediately after refrige- must not exceed the values given in table 9. Lower Initial ration batteries with dehumidification or after humidi- Pas can also be specified when appropriate. 5 fiers (exception –steam humidifiers). The filters installed in air treatment units used for hu- man occupation must be tested and classified in accor- HIGH dance with the EN 779 Standard. TEMPERA- Maximum final Initial Pressure Drop for filters. TURE Class of filter Final Initial 6 Pa G1 - G4 EQUIP- M5 - F7 150 Pa MENTS F8 - F9 200 Pa 7 300Pa MOTORS AND Note 2: the final Initial Pas indicated in the table for energy saving reasons are typical maximum values for working air treatment TURBINES units and lower than those used in the EN 779 Standard for classification purposes, and the performances ob- tained in the trials in accordance with the EN 779 Standard are not necessarily fulfilled with these lower Initial 8 Pas. The following data must be shown in a clearly visible way (with a label) in the filter section: class of filter, type of ADSOR- filtering media, final Initial TION AND Pressure Drop. On changing the filter the user must verify and update this information. DESODO- RIZATION Venfilter [email protected] 273 Tel +34 937 862 607 www.venfilter.com 9 Fax +34 937 862 493 INTER- NATONAL NORMATI- VE

0 International normative INFORMA- Equivalence of Standards for Controlled TION Rooms 1 Equivalence of international classification standards PRE- FILTERS 2 No. of particles US Fed. Std 209E 1992 EN ISO 14644-1 France AFNOR NF European Union No. of particles >0,5 µm/m³ 1996 X 44.101 1981 Pharmaceutical > 0,1 µm/m³ PAINTINGS (aprox.) Industry Guide (approx.) BOOTHS ISO 1 1 ISO 2 BPF 1989 10 3 4 ISO 3 35 10 M1 1 ISO 4 4 000 A and B 100 COMFORT 35 M 1.5 10 ISO 5 350 PRODUCTS 100 M2 100 ISO 6 1 000 353 M 2.5 1 000 3 500 4 1 000 M3 10 000 10 000 3 530 M 3.5 100 000 35 000 EPA/HEPA 10 000 M4 100 000 /ULPA 35 300 M 4.5 350 000 100 000 M5 1 000 000 5 353 000 M 5.5 1 000 000 M6 ISO 7 400 000 C HIGH 3 530 000 M 6.5 TEMPERA- 10 000 000 M7 ISO 8 4 000 000 D 35 000 000 TURE ISO 9 6 BPF 1989 - Pharmaceutical Industry Guide EQUIP- MENTS CLEAN ROOMS 7 Classification of the different air qualities required to manufacture sterile products: MOTORS Maximum Nº of particles per m3 of air, with a dimension equal or superior to Max. Nº of microor- AND ganisms per m3 of air 0.5 µm 5 µm 0.5 µm 5 µm TURBINES (in activity) In non-activity (b) In activity 8 A 3500 0 3500 0 <1 ADSOR- TION AND B 3500 0 350000 2000 10 DESODO- RIZATION C 350000 2000 3500000 20000 100 9 D 3500000 20000 not defined (c) not defined (c) 200 INTER- Venfilter NATONAL NORMATI- Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com VE 274

International normative 0 Clean rooms and controlled annexed INFORMA- premises (US.FED.STD.209E) TION 1 PRE- FILTERS Class name Class limits 2 0,1 μm 0,2 μm 0,3 μm 0,5 μm 0,5 μm PAINTINGS BOOTHS S1 English mᵌ ftᵌ mᵌ ftᵌ mᵌ ftᵌ mᵌ ftᵌ mᵌ ftᵌ M1 1 350 9,91 75,5 21,4 30,9 0,875 10 0,288 3 M 1,5 10 1240 335 265 7,5 106 3 35,3 1 247 7 M2 100 3500 99,1 757 21,4 309 8,75 100 2,83 618 17,5 COMFORT M 2,5 12499 360 2650 75 1060 30 353 10 2470 70 PRODUCTS M3 35000 991 7570 214 3090 87,5 1000 28,3 6180 175 M 3,5 26500 750 10600 300 3530 100 24700 700 4 M4 75700 2140 30900 875 10000 283 61800 1750 M 4,5 35300 1000 EPA/HEPA M5 1000 100000 2830 /ULPA M 5,5 353000 100000 M6 10000 1000000 28300 5 M 6,5 3530000 100000 M7 100000 10000000 283000 HIGH TEMPERA- EN ISO 14644 Standard TURE Classes by type of air particle cleaning for clean rooms and protected zones. 6 Classification Maximum admissible concentration (particles per m3 of air) for particle dimensions equal or superior to: Number EQUIP- 0,1 0,2 0,3 0,5 1 5 MENTS ISO CD 14644.1 10 2 (1996) 100 24 10 4 8 29 7 1000 237 102 35 83 293 ISO 1 10000 2370 1020 352 832 2930 MOTORS ISO 2 100000 23700 10200 3520 8320 29300 AND ISO 3 1000000 237000 102000 35200 83200 293000 ISO 4 352000 832000 TURBINES ISO 5 3520000 8320000 ISO 6 35200000 8 ISO 7 ISO 8 ADSOR- ISO 9 TION AND DESODO- Venfilter [email protected] 275 RIZATION Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 9 INTER- NATONAL NORMATI- VE

Edition: December 2020