Venfilter-EN-V24_JUNIO 2022_web

Equipments 0 Metal Housing INFORMA- Top Mouth TION Filters of 66,78,90 and 100mm 1 Fitting elements PRE- Terminal Diffuser for replaceable HEPA/ULPA filters, for FILTERS air diffusion in Clean Rooms with turbulent and laminar flow. 2 Technical features PAINTING BOOTHS Type: Diffuser Terminal unit for ceiling or wall installation for the final filtration in a Clean Room. 3 Construction: Airtight welded electrogalvanized steel, oven-dried white epoxy paint (RAL 9016). COMFORT Air inlate: Top (HTMBS). PRODUCTS Installation: Holes for fastening, allowing quick and easy assembling. Filter placement: At the bottom part of the one single piece smooth fra- 4 me. The filters is held in place with fasteners that exert a continuous and constant pressure. EPA/HEPA Filters: Filters of depth 66, 78, 90 and 110 mm. /ULPA Advantages 5 - Smooth coating, which facilitates the cleaning of the diffuser grid. HIGH - Internal centring devices for filters and fixed moutings for the positioning of the TEMPERA- filter inside the housing, preventing the filter from falling. TURE - Easy filter assembly and replacement. - New lid clamping system 6 INSTALLATION: - Rigid construction design. Allowing quick and easy installation. EQUIP- - Installation in ceilings using top entry. MENTS - Provided with four drilled brackets for suspended-type fitting. 7 Plenum Steel. Lace grids. Fixings for holding the filter. Holding MOTORS square AND Filter mesures. Diffuser grids Probes for integrity testing and diffe- TURBINES rential pressure measurement. Venfilter [email protected] 8 Tel +34 937 862 607 www.venfilter.com 199 Fax +34 937 862 493 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

0 Equipments INFORMA- References TION HTMBS- Top AirInlet 1 PRE- Reference Dimensions (mm) Filters BxHxP Neck UxP* Stock* FILTERS A A1 A2 B B1 B2 H (mm) inlet (mm) 1F 2 HTMBS1212/150 357 268 319 357 268 319 330 305x305x66/78/90/110 1F HTMBS1224/150 662 573 624 357 268 319 330 610x305x66/78/90/110 150 1F PAINTING HTMBS1818/250 509 410 471 509 420 471 330 457x457x66/78/90/110 150 1F BOOTHS HTMBS2121/250 587 498 549 587 498 549 330 535x535x66/78/90/110 250 1F HTMBS2323/250 627 538 589 627 538 589 330 575x575x66/78/90/110 250 1F 3 HTMBS2424/250 662 573 624 662 573 624 330 610x610x66/78/90/110 250 1F HTMBS2424/315 662 573 624 662 573 624 330 610x610x66/78/90/110 250 1F COMFORT HTMBS2436/315 967 878 929 662 573 624 330 915x610x66/78/90/110 315 1F PRODUCTS HTMBS2448/315 1272 1183 1234 662 573 624 330 1220x610x66/78/90/110 315 315 4 *UxP *Stock Units per box F: Fabricar, S: Stock, SL: Stock Limitado EPA/HEPA /ULPA Technical Documentation 5 HTMBS - Top air inlet HIGH TEMPERA- TURE 6 20 B 20 20 20 A EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- 200 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DEODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 Metal Housing INFORMA- TION Lateral mouth without regulation 1 Filters of 66,78,90 and 100mm Fitting elements PRE- FILTERS Terminal Diffuser for replaceable HEPA/ULPA filters, for air diffusion in Clean Rooms with turbulent and laminar 2 flow. PAINTING Technical features BOOTHS Type: Diffuser Terminal unit for ceiling or wall installation for the final 3 filtration in a Clean Room. Construction: Airtight welded electrogalvanized steel, oven-dried white COMFORT epoxy paint (RAL 9016). PRODUCTS Air inlate: Top (HTMBL). Installation: Holes for fastening, allowing quick and easy assembling. 4 Filter placement: At the bottom part of the one single piece smooth fra- me. The filters is held in place with fasteners that exert a continuous and EPA/HEPA constant pressure. /ULPA Filters: Filters of depth 66, 78, 90 and 110 mm. 5 Advantages HIGH - Smooth coating, which facilitates the cleaning of the diffuser grid. TEMPERA- - Internal centring devices for filters and fixed moutings for the positioning of the TURE filter inside the housing, preventing the filter from falling. - Easy filter assembly and replacement. 6 - New lid clamping system INSTALLATION: EQUIP- - Rigid construction design. Allowing quick and easy installation. MENTS - Installation in ceilings using lateral entry. - Provided with four drilled brackets for suspended-type fitting. 7 Plenum Steel. Lace grids. Fixings for holding the filter. MOTORS Holding AND square TURBINES Filter mesures. Diffuser grids Probes for integrity testing and diffe- rential pressure measurement. 8 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com 201 ADSOR- Fax +34 937 862 493 TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

0 Equipments INFORMA- References TION HTMBL- Side AirInlet 1 Reference Dimensions (mm) Filters BxHxP Neck UxP* Stock* H PRE- A A1 A2 B B1 B2 H (mm) inlet A FILTERS (mm) 1 F 1 F B 2 150 1 F HTMBL1212/150 357 268 319 357 268 319 340 305x305x66/78/90/110 150 1 F PAINTING HTMBL1224/150 662 573 624 357 264 319 340 610x305x66/78/90/110 250 1 F BOOTHS HTMBL1818/250 509 410 471 509 420 471 440 457x457x66/78/90/110 250 1 F HTMBL2121/250 587 498 549 587 498 549 440 535x535x66/78/90/110 250 1 F 3 HTMBL2323/250 627 538 589 627 538 589 440 575x575x66/78/90/110 250 1 F HTMBL2424/250 662 573 624 662 573 624 440 610x610x66/78/90/110 315 1 F COMFORT HTMBL2424/315 662 573 624 662 573 624 505 610x610x66/78/90/110 315 PRODUCTS HTMBL2436/315 967 878 929 662 573 624 505 915x610x66/78/90/110 315 HTMBL2448/315 1272 1183 1234 662 573 624 505 1220x610x66/78/90/110 4 *UxP *Stock EPA/HEPA Units per box F: Fabricar, S: Stock, SL: Stock Limitado /ULPA Technical Documentation 5 HTMBL-Air intake at the side HIGH TEMPERA- TURE 6 20 B 20 20 20 SECTION N-N’ A EQUIP- MENTS SECTION G-G’ 7 MOTORS AND TURBINES 8 ADSOR- 202 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DEODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 Metal Housing INFORMA- TION Lateral mouth with regulation 1 Filters of 66,78,90 and 100mm Fitting elements PRE- FILTERS Terminal Diffuser for replaceable HEPA/ULPA filters, for air diffusion in Clean Rooms with turbulent and laminar 2 flow. PAINTING Technical features BOOTHS Type: Diffuser Terminal unit for ceiling or wall installation for the final 3 filtration in a Clean Room. Construction: Airtight welded electrogalvanized steel, oven-dried white COMFORT epoxy paint (RAL 9016). PRODUCTS Air inlate: Top (HTMBLCR). Installation: Holes for fastening, allowing quick and easy assembling. 4 Filter placement: At the bottom part of the one single piece smooth fra- me. The filters is held in place with fasteners that exert a continuous and EPA/HEPA constant pressure. /ULPA Filters: Filters of depth 66, 78, 90 and 110 mm. 5 Advantages HIGH - Smooth coating, which facilitates the cleaning of the diffuser grid. TEMPERA- - Internal centring devices for filters and fixed moutings for the positioning of the TURE filter inside the housing, preventing the filter from falling. - Easy filter assembly and replacement. 6 - New lid clamping system INSTALLATION: EQUIP- - Rigid construction design. Allowing quick and easy installation. MENTS - Installation in ceilings using lateral entry with regulation system. - Provided with four drilled brackets for suspended-type fitting. 7 Plenum Steel with Regulation. Lace grids. Fixings for holding the filter. MOTORS Holding AND square TURBINES Filter mesures. Diffuser grids Probes for integrity testing and diffe- rential pressure measurement. 8 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com 203 ADSOR- Fax +34 937 862 493 TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

0 Equipments INFORMA- References TION HTMBLCR-Side air inlet with regulation system from the room 1 PRE- FILTERS 2 Reference Dimensions (mm) Filters BxHxP Neck UxP* Stock* H A A1 A2 B B1 B2 H (mm) Inlet (mm) HTMBLCR1212/150 357 268 319 357 268 319 340 305x305x66/78/90/110 1F A B 150 1F PAINTING HTMBLCR1224/150 662 573 624 357 264 319 340 610x305x66/78/90/110 150 1F BOOTHS HTMBLCR1818/250 509 410 471 509 420 471 440 457x457x66/78/90/110 250 1F 250 1F 3 HTMBLCR2121/250 587 498 549 587 498 549 440 535x535x66/78/90/110 250 1F HTMBLCR2323/250 627 538 589 627 538 589 440 575x575x66/78/90/110 250 1F HTMBLCR2424/250 662 573 624 662 573 624 440 610x610x66/78/90/110 315 1F HTMBLCR2424/315 662 573 624 662 573 624 505 610x610x66/78/90/110 315 1F 315 COMFORT HTMBLCR2436/315 967 878 929 662 573 624 505 915x610x66/78/90/110 PRODUCTS HTMBLCR2448/315 1272 1183 1234 662 573 624 505 1220x610x66/78/90/110 4 *UxP *Stock Units per box F: Fabricar, S: Stock, SL: Stock Limitado EPA/HEPA /ULPA Technical Documentation 5 HTMBL-Side air inlet with regulation system from the room HIGH TEMPERA- TURE 6 EQUIP- 20 B 20 20 20 MENTS SECTION N-N’ SECTION G-G’ A 7 [email protected] www.venfilter.com MOTORS AND TURBINES 8 ADSOR- 204 Venfilter TION AND Tel +34 937 862 607 DEODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 Metal Housing INFORMA- Low Depth TION Filters of 66,78mm 1 Fitting elements PRE- Terminal Diffuser for replaceable HEPA/ULPA filters, for FILTERS air diffusion in Clean Rooms with turbulent and laminar flow. 2 Technical features PAINTING BOOTHS Type: Diffuser Terminal unit for ceiling or wall installation for the final filtration in a Clean Room. 3 Construction: Airtight welded electrogalvanized steel, oven-dried white epoxy paint (RAL 9016). COMFORT Air inlate: Top (HTMBP). PRODUCTS Installation: Holes for fastening, allowing quick and easy assembling. Filter placement: At the bottom part of the one single piece smooth fra- 4 me. The filters is held in place with fasteners that exert a continuous and constant pressure. EPA/HEPA Filters: Filters of depth 66, 78mm. /ULPA Advantages 5 - Smooth coating, which facilitates the cleaning of the diffuser grid. HIGH - Internal centring devices for filters and fixed moutings for the positioning of the TEMPERA- filter inside the housing, preventing the filter from falling. TURE - Easy filter assembly and replacement. - New lid clamping system 6 INSTALLATION: - Rigid construction design. Allowing quick and easy installation. EQUIP- - Installation in ceilings using top entry. MENTS - Provided with four drilled brackets for suspended-type fitting. 7 Plenum Steel. Lace grids. Fixings for holding the filter. Holding MOTORS square AND Filter mesures. Diffuser grids Probes for integrity testing and diffe- TURBINES rential pressure measurement. Venfilter [email protected] 8 Tel +34 937 862 607 www.venfilter.com 205 Fax +34 937 862 493 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

0 Equipments INFORMA- References TION HTMBP- Top AirInlet 1 PRE- Dimensions (mm) Neck FILTERS inlet (mm) Reference A A1 A2 B B1 B2 H Filters BxHxP UxP* Stock* (mm) 150 2 HTMBP1212/150 357 264 319 357 264 319 280 150 1F HTMBP1224/150 662 569 624 357 264 319 280 305x305x66/78 250 1F 610x305x66/78 250 1F PAINTING HTMBP1818/250 509 416 471 509 416 471 280 457x457x66/78 250 1F BOOTHS HTMBP2121/250 587 494 549 587 494 549 280 535x535x66/78 250 1F 575x575x66/78 250 1F HTMBP2323/250 627 534 589 627 534 589 280 610x610x66/78 250 1F 915x610x66/78 1F 3 HTMBP2424/250 662 569 624 662 569 624 280 1220x610x66/78 HTMBP2436/250 967 874 929 662 569 624 280 HTMBP2448/250 1272 1179 1234 662 569 624 280 COMFORT PRODUCTS 4 *UxP *Stock Units per box F: Fabricar, S: Stock, SL: Stock Limitado EPA/HEPA Technical Documentation /ULPA 5 HTMBP-Low upper air inlet depth HIGH TEMPERA- TURE 6 EQUIP- A2 A1 +1.5 (Extreme MENTS A1 7 B2 B1 MOTORS B1 +1.5 (Extreme AND TURBINES 8 ADSOR- 206 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DEODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 Plastic Housing INFORMA- TION Fitting Elements 1 Terminal Diffuser for replaceable HEPA/ULPA filters for air diffusion in Clean Rooms with turbulent and laminar PRE- flow. FILTERS Technical features 2 Type: Diffuser Terminal unit for ceiling or wall installation for PAINTING the final filtration in a Clean Room. BOOTHS Construction: Manufactured in Self-Extinguishable Thermo- formed Polystyrene. The lower part is manufactured in extru- 3 ded aluminum profile and painted in white epoxy (RAL 9016). Temperature: 80ºC in continuos service COMFORT Air Inlet: Side Inlet; circular neck. PRODUCTS Installation: Its lightweight design and rigid construction makes it easy and quick to fit. It has four squares fastening for 4 its attachment. Filter placement: At the bottom part of the one single piece EPA/HEPA smooth frame. The filters is held in place with fasteners that /ULPA exert a continuous and constant pressure. Filters: Laminarven type; depth of 66 mm. 5 Optionally they are manufactured with a room-based flow control system (HTPBCR). HIGH TEMPERA- Advantages TURE - Significant weight reduction with respect to pre-existing terminal boxes. - Smooth coating, which facilitates the easy cleaning of the diffuser grid. 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Plastic plenum. White-painted (RAL 9016) Sliding and removable Probes for integrity ADSOR- extruded profile frame moutings for filter po- testing and differential TION AND on the lower part of the sitioning. DEODO- unit. pressure measure- RIZATION 9ment. Venfilter Tel +34 937 862 607 [email protected] 207 INTER- Fax +34 937 862 493 www.venfilter.com NATONAL REGU- LATION

0 Equipments INFORMA- TION 1 HTPB-Without flow regulation system PRE- Flow regulation sys- Diffuser grids: Perfora- FILTERS tem Room-based. ted or rotational, white epoxy paint (RAL 9016). 2 PAINTING References BOOTHS HTPB-Without flow regulation system 3 COMFORT Dimensions (mm) Filters Neck PRODUCTS BxHxP (mm) inlet Reference A A1 A2 B B1 B2 H (mm) UxP* Stock* 4 305x305x66 HTPB1212.2 340 270 320 340 285 320 325 610x305x66 150 1F A H EPA/HEPA HTPB1224.2 655 575 625 340 285 320 325 610x610x66 150 1S B /ULPA HTPB2424.2 655 575 625 655 575 625 365 1220x610x66 200 1S HTPB2448.2 1260 1180 1235 655 575 625 420 250 1S 5 *UxP *Stock Units per box F: Manufacture, S: Stock, SL: Limited Stock HIGH Technical Documentation TEMPERA- HTPB-Without flow regulation system TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- 208 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DEODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 HTPBCR-With flow regulation system INFORMA- TION Flow regulation sys- Diffuser grids: Perfora- tem Room-based. ted or rotational, white 1 epoxy paint (RAL 9016). PRE- References FILTERS HTPBCR-With flow regulation system 2 Reference Dimensions (mm) Filters Neck UxP* Stock* PAINTING A A1 A2 B B1 B2 H BxHxP (mm) inlet BOOTHS (mm) 1F HTPBCR1212.2 340 270 320 340 285 320 325 305x305x66 1F 3 HTPBCR1224.2 655 575 625 340 285 320 325 610x305x66 150 1F HTPBCR2424.2 655 575 625 655 575 625 365 610x610x66 150 1F COMFORT HTPBCR2448.2 1260 1180 1235 655 575 625 420 1220x610x66 200 PRODUCTS 250 4 *UxP *Stock Units per box F: Manufacture, S: Stock, SL: Limited Stock EPA/HEPA /ULPA Technical Documentation 5 HTPBCR-With flow regulation system HIGH Venfilter [email protected] 209 TEMPERA- Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

0 Equipments INFORMA- Diffuser and Grids TION Fitting Elements 1 PRE- Final filtration at the injection nozzle or one-way flow FILTERS extraction for Clean Rooms. 2 Technical features PAINTING Type: Diffuser grids. Dimensions BOOTHS Models: For Plastic Housings: 3 DFPAPHTPB: Perforated aluminum diffuser; white epoxy pain- ted (RAL 9016). COMFORT DFRHTP: Rotational diffuser white epoxy painted (RAL 9016), PRODUCTS with a helical jet. For Metal Housings: 4 DFPAPHTM: Perforated steel diffuser; in white epoxy painted (RAL 9016). EPA/HEPA DFRHTM: Rotational diffuser; white epoxy painted (RAL 9016) he- /ULPA lical jet. Assembly: Diffusers are mounted using screws. Perforation ratio: 40% for DFPAPHTPB / 45% for DFPAPHTM. 5 References Model Dimensions LxH Filters BxH Unit Volume Weight UxP Stock (m3) (Kg) ** HIGH Reference DFPAPHTPB 332x332x7 305X305 0.01 0.28 1S TEMPERA- DFPAPHTPB 640x332x7 610x305 0.01 0.49 1S DFPAPHTPB1212 DFPAPHTPB 640x640x7 610X610 0.02 0.85 1S TURE DFPAPHTPB1224 DFPAPHTPB 1243x640x7 1220X610 0.05 1.6 1S DFPAPHTPB2424 332x332x7 305x305 0.01 - 1S 6 DFPAPHTPB2448 DFRHTP 640x332x7 610x305 0.01 - 1S DFRHTP1212/16 DFRHTP 640x640x7 610X610 0.02 - 1S EQUIP- DFRHTP1224/32 DFRHTP 1243x640x7 1220x610 0.05 - 1S MENTS DFRHTP2424/32 DFRHTP 349x349x10 305x305 0.01 - 1F DFRHTP2448/64 DFPAPHTM 654x349x10 610x305 0.02 - 1F 7 DFPAPHTM1212 DFPAPHTM 501x501x10 457X457 0.03 - 1F DFPAPHTM1224 DFPAPHTM 654x654x10 610X610 0.05 - 1F MOTORS DFPAPHTM1818 DFPAPHTM 959x654x10 915X610 0.07 - 1F AND DFPAPHTM2424 DFPAPHTM 1264x654x10 1220X610 0.09 - 1F DFPAPHTM2436 DFPAPHTM 364x364x10 305x305 0.01 - 1S TURBINES DFPAPHTM2448 DFRHTM 665x360x10 610x305 0.01 - 1S DFRHTM1212/16 DFRHTM 511x511x10 457x457 0.02 - 1S 8 DFRHTM1224/32 DFRHTM 665x665x10 610x610 0.02 - 1S DFRHTM1818/24 DFRHTM 1279x669x10 1220x610 0.08 - 1S ADSOR- DFRHTM2424/32 DFRHTM TION AND DFRHTM2448/64 DEODO- RIZATION *UxP *Stock Units per box F: Manufacture, S: Stock, SL: Limited Stock 9 Venfilter INTER- 210 Tel +34 937 862 607 [email protected] NATONAL Fax +34 937 862 493 www.venfilter.com REGU- LATION

Equipments 0 Terminal module INFORMA- TION Fitting Elements 1 Terminal module Diffuser with built-in fan. This module aspires the air from its plenum or from a clean atmosphere PRE- in order to create a localized laminar flow for clean and FILTERS sterile rooms. 2 Technical features Dimensions PAINTING Type: Diffuser Terminal module with built-in fan. BOOTHS Construction: Airtight welded electrogalvanized steel, white epoxy paint (RAL 9016) oven-dried. 3 Air inlate: Circular at the top. Filter attachment: At the bottom part of the single piece COMFORT smooth frame. The filter is held in place with fasteners that PRODUCTS exert a continuous and constant pressure. Filters: Air ultrafiltration up to U15 class. 4 Radial fans with backward curved blades. EPA/HEPA - External rotor engine protected by thermoforming. /ULPA - Statically and dynamically balanced turbine according to VDI 2060 class Q 2.5. 5 Single phase 230V, 50Hz. HIGH Intensity: 0.67 Amp. TEMPERA- Power: 154 W. Speed: 2500 r.p.m. TURE Max. & Delta press.; Pa: 460 Noise level at 1.5 m/s.: 60 dB (A) 6 ACCESSORIES EQUIP- Pressure Gauge.- Pre. 1 (Range from 10 to 700 Pa). MENTS Pre-filter. Variator. 7 Pre-filter support. MOTORS Advantages AND - Independent laminar flow. Reduced height. TURBINES - Installable in standard roof constructions. - Interchangeable HEPA or ULPA filter. Ultra-air filtration up to U15 (EN 1822). 8 - Filter can be removed without altering roof sealing properties. DOP and Pressure Drop connections. - Variable speed drive. ADSOR- TION AND References DEODO- RIZATION Reference Dimensions Nominal Initial Filters Neck Unit Volume Weight UxP Stock BxHxP flow (m3/h) Pa BxHxP Inlet (m3) (Kg) ** 9 MGGV2424.2 125 610x610x66 200 0.13 27 1F MGGV2448.2 680x680x300 600 125 1220x610x66 200 (2) 0.26 44 1F INTER- 1290x680x300 1200 NATONAL 211 *UxP *Stock REGU- Units per box F: Manufacture, S: Stock, SL: Limited Stock LATION Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Equipments INFORMA- TION 1 PRE- FILTERS 2 PAINTING BOOTHS 3 COMFORT PRODUCTS 4 Applications CLASS 100 LOCATED TREATMENT Low flow zone in an environment EPA/HEPA COMPOSITE ROOM class 10,000 / 100,000 /ULPA Class 10/100 work areaintegrated in a 1000 / - Pharmaceutical Laboratories. 10,000 class environment - Agri-food industry. 5 - Micro electronics. - Hospitals. - Pharmacy. HIGH - Optics Venfilter [email protected] TEMPERA- - Bio-Technologies Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 TURE CLASS 10 TO 10,000 WHITE ROOM Ultra clean and localized environment, for a 6 protection adapted to the process, equipment or work areas. EQUIP- - Sterile conditioning. MENTS - Agri-food industry. - Precision mechanics. 7 - QA. 212 MOTORS AND TURBINES 8 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 MGGV2448 INFORMA- TION 1 PRE- FILTERS 2 PAINTING BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DEODO- RIZATION 9 [email protected] 213 INTER- www.venfilter.com NATONAL REGU- LATION

0 Equipments Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com INFORMA- MGGV2424 Fax +34 937 862 493 TION 214 1 PRE- FILTERS 2 PAINTING BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 UFA AIR Dimensions INFORMA- Air treatment unit TION H B Filtration Unit: VEN AIR p 1 Supply and extract air for Very High Efficiency or absolute PRE- HEPA filters. FILTERS Technical features 2 Type: UFA series purification units. PAINTING Construction: Filter-holder drawer built in 25 mm thick BOOTHS sandwich panel, externally lacquered, aluminum profile chassis and polyamide corner pieces. 3 Registration: Side (left or right). Filter fixing: BTRA frame (not included in tariff price) COMFORT Installation: Installed at the ends of the air distribution duct PRODUCTS or inserted in the ventilation circuit. For filters: HEPA 4 Constant flow control: Included as standard Optional: Prefilter EPA/HEPA /ULPA HEPA Antimicrobial DIRTY FILTER PROBE 5 PROBE ASSEMBLY CONTROL (Mounted and wired) HIGH Control characteristics: TEMPERA- - On / Off - Fan Speed ​C​ ontrol TURE - Hours of operation programming. - Control dirty filters by TIMER. 6 - ModBus connection. Advantatges - Range with flow rates from 1500 to 14.000m3/h. - Electronic motors with EC technology for low electric consumption. - Low noise level References EQUIP- MENTS Article code Model Dimensions No. of No. of Unitary Flow Unitary Flow FAN Weight UxP Stock BxHxP Filters Filters (m3/h) H13 (m3/h) H14 (Kg) 7 610x610x292 305x610x292 730x520x1200 mm 1500 1200 MOTORS UFA-HEPA-1500 UFA-AIR 1 4000 3000 K3G250 RR02-12 76 1 F AND 5500 4200 K3G355 RJ75-01 160 1 F UFA-HEPA-4000 UFA-AIR 730x730x1300 mm 1 1 8000 6000 K3G400 AY87-02 210 1 F TURBINES 16000 12000 K3G450 AQ24-01 290 1 F UFA-HEPA-5500 UFA-AIR 1020x730x1400 mm 1 K3G560 AQ04-01 470 8 UFA-HEPA-8000 UFA-AIR 1320x730x1450 mm 2 UFA-HEPA-14000 UFA-AIR 1320x1340x1500 mm 4 Accesories ADSOR- TION AND Reference Description DEODO- UFA-SPD Differential Pressure Probe RIZATION UFA-CR Control Regulation 9 Venfilter [email protected] 215 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 REGU- LATION

0 Equipments INFORMA- Technical documentation TION UFA-HEPA-1500 1 PRE- 670 FILTERS 2 670 x 310 1200 PAINTING Available pressure 310 BOOTHS pfs[Pa[ 730 600 3 315 COMFORT pfs_[in. wg[ModelPowerFANIntensityVoltage PRODUCTS K3G250 RR02 I2 750 W rpm 3.30 A 230V/I 50/60Hz 4250 4 Fan performance EPA/HEPA /ULPA 5 HIGH Maximum point TEMPERA- Filter dirty TURE Filter clean 6 EQUIP- qv [m3/h[ MENTS Airflow 7 Maximum flow: fan flow with free outlet, without any blockage Clean filter: the estimated pressure loss that the filter has during the first hours of operation MOTORS Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss AND '' will be higher than in the case of a clean filter TURBINES 8 NOISE LEVELS ADSOR- Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure TION AND DEODO- 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total RIZATION 48,4 61,6 52,5 53,1 57,6 56,6 55,0 51,9 49,2 9 Venfilter INTER- NATONAL Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com REGU- 216 LATION

Equipments 0 Technical documentation INFORMA- TION UFA-HEPA-4000 1 730 670 x 625 625 400 670 PRE- FILTERS 1300 685 2 Model Power FAN Intensity Voltage K3G355 RJ75 01 1100 W rpm 1,70 A 230V/I 50/60Hz PAINTING 2400 BOOTHS 3 COMFORT PRODUCTS Fan performance 4 qv [cfm[ EPA/HEPA /ULPA Available pressure Filter dirty pfs_[in. wg[ pfs[Pa[ 5 Filter clean HIGH qv [m3/h[ 3900 TEMPERA- Airflow TURE Maximum flow: fan flow with free outlet, without any blockage 6 Clean filter: the estimated pressure loss that the filter has during the first hours of operation Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss EQUIP- '' will be higher than in the case of a clean filter MENTS NOISE LEVELS 7 Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure MOTORS 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total AND 48,9 48,1 53,5 53,8 49,6 50,3 48,5 47,3 57,3 TURBINES Venfilter [email protected] 217 Tel +34 937 862 607 www.venfilter.com 8 Fax +34 937 862 493 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

0 Equipments INFORMA- Technical documentation TION UFA-HEPA-5500 1 960 PRE- FILTERS 2 730 960 x 680 450 680 PAINTING 1400 1020 BOOTHS 3 COMFORT Model Power FAN Intensity Voltage PRODUCTS K3G400 AY87 02 1850 W rpm 2,9 A 400V/III 50/60Hz 2180 4 Fan performance EPA/HEPA /ULPA qv [cfm[ 5 HIGH Available pressure Maximum point TEMPERA- pfs[Pa[ Filter dirty pfs_[in. wg[ TURE Filter clean 6 qv [m3/h[ EQUIP- Airflow MENTS Maximum flow: fan flow with free outlet, without any blockage 7 Clean filter: the estimated pressure loss that the filter has during the first hours of operation Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss MOTORS '' will be higher than in the case of a clean filter AND TURBINES 8 NOISE LEVELS Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure ADSOR- TION AND 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total DEODO- 48,3 48,3 59,9 56,1 53,4 53,9 49,0 46,6 60,0 RIZATION 218 Venfilter [email protected] 9 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 INTER- NATONAL REGU- LATION

Equipments 1260 0 680 Technical documentation INFORMA- TION UFA-HEPA-8000 1 1260 x 680 730 PRE- 500 FILTERS 1450 1320 2 Model Power FAN Intensity Voltage PAINTING K3G450 AQ24 01 2730 W rpm 4,2 A 400V/III 50/60Hz BOOTHS 2040 3 COMFORT PRODUCTS Fan performance 4 qv [cfm[ EPA/HEPA /ULPA Available pressure Maximum point pfs_[in. wg[ pfs[Pa[ Filter dirty 5 Filter clean HIGH TEMPERA- qv [m3/h[ 8000 Airflow TURE Maximum flow: fan flow with free outlet, without any blockage 6 Clean filter: the estimated pressure loss that the filter has during the first hours of operation Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss EQUIP- '' will be higher than in the case of a clean filter MENTS NOISE LEVELS 7 Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure MOTORS AND 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total 49,6 62,7 TURBINES 50,9 61,1 59,8 56,2 53,7 52,9 55,1 219 8 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com ADSOR- Fax +34 937 862 493 TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

0 Equipments INFORMA- Technical documentation TION UFA-HEPA-14000 1 1260 PRE- FILTERS 2 1260 x 1280 1340 1280 560 PAINTING 1500 1320 BOOTHS 3 COMFORT Model Power FAN Intensity Voltage PRODUCTS K3G560 AQ04 01 4700 W rpm 7,3 A 400V/III 50/60Hz 1750 4 EPA/HEPA Fan performance /ULPA qv [cfm[ 5 HIGH Available pressure Maximum point TEMPERA- pfs[Pa[ pfs_[in. wg[ TURE 6 Filter dirty EQUIP- Filter clean MENTS qv [m3/h[ 12000 7 Airflow MOTORS Maximum flow: fan flow with free outlet, without any blockage AND Clean filter: the estimated pressure loss that the filter has during the first hours of operation Dirty filter: when the filter catches dirt, it increases the resistance it exerts on the air flow, so the pressure loss TURBINES '' will be higher than in the case of a clean filter 8 NOISE LEVELS Sound pressure (LpA) at 3m in open field, in dB(A) at nominal flow rate and maximum pressure ADSOR- TION AND 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz Total DEODO- 51,9 53,1 63,1 57,5 59,0 60,0 57,4 57,7 65,8 RIZATION 220 Venfilter [email protected] 9 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 INTER- NATONAL REGU- LATION

Equipments 0 Box INFORMA- TION Fitting Elements 1 Air impulsion or extraction for High Efficiency filtration. PRE- FILTERS Technical features Dimensions 2 Type: Filtering module for Air Treatment. H PAINTING Construction: Filter holder case built in 23 mm sandwich panel, thick, BOOTHS lacquered on the outside, aluminum profile frame with polyamide cor- ner pieces and 50 mm base. 3 Optional: Stainless Steel. Registration: At the side (left or right). COMFORT Filter attachment: By means of a BTRM frame with 4 attachment clips. PRODUCTS Installation: Installed at the ends of the air distribution duct or inserted in the ventilation circuit. 4 For filters: Fitting of filters with flange (Multiven, Varipac) Includes: Rack for high efficiency pre-filter or filter. EPA/HEPA Optional: The module can include a fan, cooling/heating coils, flow regu- /ULPA lation gates control system and hoppers to insert into a duct. 5 Advantages P B HIGH - High Flow compact Solution. TEMPERA- - High-efficiency filtration- from M5 to F9. - Smell and contaminant filtration (Multicarb). TURE - Assembly of filters with 25mm flange. - Record for filter maintenance on the right or left side. 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DEODO- RIZATION 9 [email protected] 221 INTER- www.venfilter.com NATONAL REGU- LATION

0 Equipments INFORMA- References TION Reference Model Dimensions Qty. of Filters Qty. of Filters Max. Nominal Weight UxP Stock 1 BxHxP 595x595x292 595x287x292 flow (m3/h) (Kg) * * BOX1224 BOX-AE 1700 75 1 F PRE- BOX2424 BOX-AE 425x730x1000 1 1 3400 95 1 F FILTERS BOX2436 BOX-AE 730x730x1000 1 5100 120 1 F BOX3624 BOX-AE 730x1035x1000 1 1 5100 120 1 F 2 BOX2448 BOX-AE 1085x730x1000 2 1 6800 135 1 F BOX4824 BOX-AE 730x1340x1000 2 6800 135 1 F PAINTING BOX3648 BOX-AE 1340x730x1000 2 2 10200 170 1 F BOOTHS BOX4848 BOX-AE 1085x1340x1000 4 13600 200 1 F BOX6048 BOX-AE 1390x1340x1000 4 2 17000 220 1 F 3 BOX7248 BOX-AE 1650x1340x1000 6 20400 260 1 F BOX7272 BOX-AE 1950x1390x1000 9 30600 330 1 F COMFORT 1950x1950x1000 PRODUCTS *UxP (*) Other sizes: pleased consult. *Stock 4 Units per box F: Manufacture, S: Stock, SL: Limited Stock EPA/HEPA Technical Documentation /ULPA Module configuration 5 1224 2424 2436 3624 2448 4824 HIGH TEMPERA- 3648 4848 6048 7248 7272 TURE 222 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com 6 Fax +34 937 862 493 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

Equipments Dimensions 0 Boxhepa H P INFORMA- B TION Fitting Element 1 Air impulsion or extraction for Very High Efficiency filtration. PRE- FILTERS Technical features 2 Type: Filtering module for Air Treatment. Construction: Filter holder case built in 23 mm sandwich panel, PAINTING thick, lacquered on the outside, aluminum profile frame with pol- BOOTHS yamide corner pieces and 50 mm base. Optional: Stainless Steel. 3 Registration: At the side (left or right) Filter attachment: By an a BTRA frame with 4 fastening stays. COMFORT Installation: Installed at the ends of the air distribution duct or PRODUCTS inserted in the ventilation circuit. For filters: Fitting of Very High Efficiency or Absolute filters. (Po- 4 liven and Astroven) Includes: Rack for high efficiency pre-filter or filter. EPA/HEPA /ULPA Advantages 5 - Very High Flow Compact Solution. - Absolute filtration, from H10 to H14. HIGH - Assembly of filters with 25mm flange. TEMPERA- - Record for filter maintenance on the right or left side. TURE References 6 Reference Model Dimension Qty. of Filters Qty. of Filters Max.Nominal Max.Nominal Weight UxP Stock BxHxP 610x610x292 EQUIP- BOXHP1224 BOX-HP 610x305x292 Flow (m3/h) Flow (Kg) * * MENTS BOXHP2424 BOX-HP 450x750x1000 1 BOXHP2436 BOX-HP 750x750x1000 1 H10 (m3/h) H13 7 BOXHP3624 BOX-HP 750x1075x1000 1 BOXHP2448 BOX-HP 1125x720x1000 2 1 2000 1700 80 1 F MOTORS BOXHP4824 BOX-HP 750x1380x1000 2 AND BOXHP3648 BOX-HP 1430x750x1000 2 5000 4000 100 1 F BOXHP4848 BOX-HP 1125x1380x1000 4 TURBINES BOXHP6048 BOX-HP 1430x1380x1000 4 1 7000 5700 125 1 F BOXHP7248 BOX-HP 1710x1380x1000 6 8 BOXHP7272 BOX-HP 2010x1430x1000 9 1 7000 5700 125 1 F 2010x2085x1000 ADSOR- 10000 8000 140 1 F TION AND DEODO- 10000 8000 140 1 F RIZATION 2 14000 11400 180 1 F 9 20000 16000 210 1 F INTER- NATONAL 2 24000 19400 240 1 F REGU- 30000 24000 270 1 F LATION 45000 36000 350 1 F *UxP *Stock - Other sizes: pleased consult. Units per box F: Manufacture, S: Stock, SL: Limited Stock Venfilter [email protected] 223 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Equipments INFORMA- Technical Documentation TION Module configuration 1 PRE- FILTERS 2 1224 2424 2436 3624 2448 4824 PAINTING BOOTHS 3 COMFORT PRODUCTS 4 3648 4848 6048 7248 7272 224 EPA/HEPA Venfilter [email protected] /ULPA Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 Boxcarb INFORMA- TION Fitting Elements 1 Air impulsion or extraction for active carbon cartridges. PRE- FILTERS Technical features 2 Type: Filtering module for Air Treatment. Dimensions PAINTING Construction: Filter holder case built in 23 mm sandwich panel, BOOTHS thick, lacquered on the outside, aluminum profile frame with pol- yamide corner pieces and 50 mm base. 3 Registration: At the side (left or right). Filter attachment: Support with quick bayonet adjustment. COMFORT Installation: Installed at the ends of the air distribution duct or PRODUCTS inserted in the ventilation circuit. For filters: Cylindrical cartridges of rechargeable active carbon. 4 Includes: Rack for prefilter or high efficiency filter. EPA/HEPA Advantages H /ULPA - Solution for inserting active carbon cylindrical cartridges into a ducts. B P 5 - Filtering of odours and pollutants. - Record for filter maintenance on the right or left side. References HIGH TEMPERA- TURE Reference Model Dimensions Dimension No. of Minimum Nominal Carbon Weight UxP Stock 6 BxHxP cartridges (mm.) Cartridges contact flow (Kg) (Kg) ** BOXCC1224 BOX-CC Time (sec.) (m3/h) EQUIP- BOXCC2424 BOX-CC 450x750x1000 145x85x250 8 800 23,2 80 1F MENTS BOXCC2448 BOX-CC 750x750x1000 145x85x250 16 0,1 1600 46,4 100 1F 750x1380x1000 145x85x250 32 0,1 3200 92,8 140 1F 7 0,1 1F MOTORS BOXCC1224 BOX-CC 450x750x1000 145x85x250 8 0,1 1200 34,4 80 1F AND BOXCC2424 BOX-CC 750x750x1000 145x85x250 16 1F BOXCC2448 BOX-CC 750x1380x1000 145x85x250 32 0,1 2400 68,8 100 TURBINES 0,1 4800 137,6 140 8 *UxP *Stock Units per box F: Manufacture, S: Stock, SL: Limited Stock Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DEODO- RIZATION 9 [email protected] 225 INTER- www.venfilter.com NATONAL REGU- LATION

0 Equipments INFORMA- Technical Documentation TION Module configuration 1 PRE- FILTERS 2 1224 2424 2436 3624 2448 4824 PAINTING BOOTHS 3 COMFORT PRODUCTS 4 3648 4848 6048 7248 7272 226 EPA/HEPA Venfilter [email protected] /ULPA Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

Equipments 0 Racks for INFORMA- pre-filters TION Fitting elements 1 PRE- FILTERS Modular frames for flat filters and medium and high Dimensions 2 efficiency filters with flange. PAINTING Technical features BOOTHS Type: Universal Frame for front fitting. 3 Frame: Galvanized Steel and Stainless Steel. Gasket: Neoprene. COMFORT Fitting of filter: 4 spring clamps. PRODUCTS Advantages 4 - Structures adaptable to any installation. EPA/HEPA - Filter assembly includes a polyurethane seal and four /ULPA springs for filter clamping to prevent leakage or particle mi- gration. 5 - Interconnection perforations for fixing or coupling between racks. References HIGH TEMPERA- Reference TURE BTRM121203 BTRM121204 Model Dimensions FIlters Insert Unit Weight UxP Stock 6 BTRM122403 BxHxP BxH thicknesses Volume (Kg) ** BTRM122404 0,53 BTRM122406 BTRM 305x305x75 287/290x287/290 (mm) (m3) 1,1 F EQUIP- BTRM202003 BTRM 305x305x100 287/290x287/290 25 o 25+25 0,007 MENTS BTRM202004 BTRM 305x610x75 287/290x592/595 0,01 1,45 F BTRM202006 BTRM 305x610x100 287/290x592/595 25+50 0.014 BTRM202404 BTRM 305x610x140 287/290x592/595 25 o 25+25 0,019 2,1 14 SL 7 BTRM242403 BTRM 508x508x75 490/495x490/495 0,022 SL BTRM242404 BTRM 508x508x100 490/495x490/495 25+50 0,02 BTRM242406 BTRM 508x508x140 490/495x490/495 25+100 0,03 8F BTRM 508x610x100 490/495x592/595 25 o 25+25 0,03 BTRM 610x610x75 592/595x592/595 25+50 0,03 9 F MOTORS BTRM 610x610x100 592/595x592/595 25+100 0,03 AND 610x610x140 592/595x592/595 25+50 0,04 7 F TURBINES BTRM 25 o 25+25 *UxP 25+50 0.05 6F Units per box 25+100 8SL 7S 5 SL *Stock 4 F ADSOR- F: Manufacture, S: Stock, SL: Limited Stock TION AND DEODO- Venfilter RIZATION Tel +34 937 862 607 Fax +34 937 862 493 9 [email protected] 227 INTER- www.venfilter.com NATONAL REGU- LATION

0 Equipments INFORMA- Racks for Absolute TION filter 1 Fitting elements PRE- FILTERS 2 Modular frames for High-efficiency filters and activated Dimensions carbon cells. PAINTING BOOTHS Technical features 3 Type: Front-mounting Universal Frame. Frame: Galvanized steel. COMFORT Filter fitting: Fixed straps. PRODUCTS Advantages 4 - Structure adaptable to any installation. EPA/HEPA - Filter assembly includes a one-piece, semi-circular polyu- /ULPA rethane seal and four non-movable angle pieces with tigh- tening screws and bolts for filter retention in order to avoid 5 leakage or particle migration. HIGH References Model Dimensions Filters Unit Stock TEMPERA- BxHxP BxHxP Volume * Referance TURE 325x325x210 305x305x150 (m3) F BTRA121206 BTRA 325x325x345 305x305x292 0,02 F 6 BTRA121212 BTRA 321x626x210 305x610x150 F BTRA122406 BTRA 321x626x345 305x610x292 0,04 S EQUIP- BTRA122412 BTRA 626x626x210 610x610x150 F MENTS BTRA242406 BTRA 626x626x345 610x610x292 0,04 S BTRA242412 BTRA 0,07 7 0,08 0,14 MOTORS AND *UxP *Stock Units per box F: Manufacture , S: Stock, SL: Limited Stock TURBINES 228 Venfilter [email protected] 8 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

Motors and turbines Dimensions 0 Multiven G4 INFORMA- TION Filters for turbines 1 Filtration of air inlet, outlet and recirculation in ventilation systems where a high degree of durability is required, such PRE- as: Gas turbines and turbochargers. FILTERS Technical features 2 Type: Compact Multi-dihedral Rigid Bags Filter. PAINTING Frame: Plastic (Polystyrene). BOOTHS Filter Element: Synthetic. Separators: Thermoplastic glue beads. 3 Sealant: Polyurethane. EN 779 Class: G4. COMFORT ISO 16890: Coarse 60%. PRODUCTS Recommended Final Pressure Drop: 450 Pa. Temperature: 80ºC, continuous service. 4 Advantages EPA/HEPA /ULPA - Rigid construction facilitating installation, all components are Anticorrosive and incinerable. 5 - High Nominal Flow for a low Pressure Drop, this is obtained with a larger filter area in m2 with respect to bag filters. - Excellent performance in difficult operating conditions. HIGH TEMPERA- TURE 6 EQUIP- MENTS References Dimensions EN 779 ISO 16890 Filtering Nominal Initial Unit UxP Stock 7 BxHxP Class Surface Flow Pa Volume ** Reference (m3/h) MOTORS (m2) (m3) AND TURBINES MVS122412G4 592x292x292 G4 Grueso 60% 3,00 1750 60 0,05 1F 8 MVS202412G4 592x492x292 G4 Grueso 60% 5,00 2800 60 0,09 1F MVS242412G4 592x592x292 G4 Grueso 60% 6,00 3400 60 0,11 1F ADSOR- MVS122417G4 592x292x440 G4 Grueso 60% 4,50 1750 80 0,08 1F TION AND MVS202417G4 592x492x440 G4 Grueso 60% 7,50 2800 80 0,13 1F DEODO- MVS242417G4 592x592x440 G4 Grueso 60% 9,00 3400 80 0,16 1F RIZATION *UxP *Stock 9 Units per box F: Manufacture, S: Stock, SL: Limited Stock Venfilter [email protected] 229 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 REGU- LATION

0 Motors and turbines INFORMA- V60TION 1 Filters for turbines PRE- Filtration of inlet, outlet and recirculation in ventilation FILTERS systems where a high degree of durability is required, such as: Gas turbines and turbo-compressors. 2 PAINTING Dimensions Certification BOOTHS Technical features 3 Type: Rigid bag filter. Frame: Polyurethane. Media: Progressive synthetic fiber structure. Bags: Conical and heat-sealed, with spacers built into the COMFORT polyurethane frame, forming a rigid and aerodynamic unit. PRODUCTS Average Efficiency % (Em): 63% EN 779 Class: M6. ISO 16890: ePM10 60%. 4 Recommended Final Pressure Pressure Drop: 450 Pa Retention capacity (AC Fine/1000 Pa): 3000 g/unit Breaking strength: 3000 Pa. EPA/HEPA Temperature: 90ºC. /ULPA 5 Advantages - Incinerable. HIGH - Self-supporting bags. TEMPERA- - Low initial pressure drop. TURE 6 References EQUIP- Reference Dimensions Number EN 779 ISO 16890 Nominal Initial Filtering Energy Energy Energy UxP Stock MENTS BxHxP of Class flow Pa Surface Class (m3/h) 16890 Cons. Cons. * * 7 bags M6 (m2) **** M6 kWh/ kWh/year MOTORS C AND year 16890 TURBINES 779 ** * V60-1/1 595x595x600 8 ePM10 60% 3400 62 5.56 790 645 2 S V60-1/2 287x595x600 4 ePM10 60% 1700 2.8 4F 8 *UxP *Stock * Energy Consumption kWh / year: Calculated according to Eurovent 4 / 21-2017 guidelines. Units per box ADSOR- F: Manufacture, S: Stock, SL: Limited Stock ** Energy Consumption kWh / year: Calculated according to Eurovent guidelines. TION AND DEODO- Venfilter RIZATION Tel +34 937 862 607 Fax +34 937 862 493 9 INTER- 230 [email protected] NATONAL www.venfilter.com REGU- LATION

Motors and turbines Dimensions 0 Certification Multiven Turbine 292 INFORMA- TION Filters for turbines 1 Gas turbine air inlet. PRE- Technical features FILTERS Type: Compact Polyhedral Rigid Bag Filter. 2 Frame: Polystyrene. Filtering Element: Fiberglass paper. PAINTING Separators: Thermoplastic glue beads. BOOTHS Sealant: Bases, side and front sealed with Polyurethane. Gasket: Bicomponent polyurethane liquid system. (Semicircular 3 expanded polyurethane). Grid: Reinforcement grid as the air outlet in the model MVTG, the COMFORT model MVTGSR does not include safety grid. PRODUCTS Average Efficiency % (Em): 80% < Em < 90% et 95% < Em. EN779 Class: F7 and F9. 4 ISO 16890: ePM1 50% and ePM1 80%. Recommended Final Pressure Drop:600 Pa. EPA/HEPA Temperature: 80ºC continuous service. /ULPA Humidity: 100% RH. 5 References HIGH Reference Dimensions EN 779 *ME ISO 16890 Filtering Nominal Initial Unit Weight UxP Stock TEMPERA- BxHxP Class % Surface MVTG242412F9 flow Pa volume (Kg) * * TURE MVTG202412F9 (m2) MVTG122412F9 19 (m3/h) (m3) 6 MVTG242412F7 15 MVTG202412F7 592x592x292 F9 78 ePM1 80% 8.5 4250 155 0.11 5 1 F EQUIP- MVTG122412F7 19 MENTS 592x492x292 ePM1 80% 15 3500 0.09 4 1F 8.5 7 592x292x292 ePM1 80% 2125 0.06 3 1F MOTORS 592x592x292 F7 54 ePM1 50% 4250 78 0.11 5 1 F AND 592x492x292 ePM1 50% 3500 0.09 4 1F TURBINES 592x292x292 ePM1 50% 2125 0.06 3 1F 8 MVTGSR242412F9 592x592x292 F9 78 ePM1 80% 19 4250 155 0.11 5 1F ADSOR- 15 4 1F TION AND MVTGSR202412F9 592x492x292 ePM1 80% 8.5 3500 0.09 3 1F DEODO- 19 5 1F RIZATION MVTGSR122412F9 592x292x292 ePM1 80% 15 2125 0.06 4 1F 8.5 3 1F 9 MVTGSR242412F7 592x592x292 F7 54 ePM1 50% 4250 115 0.11 INTER- MVTGSR202412F7 592x492x292 ePM1 50% 3500 0.09 NATONAL MVTGSR122412F7 592x292x292 ePM1 50% 2125 0.06 REGU- LATION *UxP *Stock *ME%: Minium Efficiency to EN779:2012 Units per box F: Manufacture, S: Stock, SL: Limited Stock Venfilter [email protected] 231 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Motors and turbines INFORMA- Multiven Turbine 440 TION Filters for turbines 1 Gas turbine air inlet. PRE- FILTERS 2 Technical features Dimensions Certification PAINTING Type: Compact Polyhedral Rigid Bag Filter. BOOTHS Frame: Polystyrene. Filtering Element: Fiberglass paper. 3 Separators: Thermoplastic glue beads. Sealant: Bases, side and front sealed with Polyurethane. COMFORT Gasket: Bicomponent polyurethane liquid system (Semicir- PRODUCTS cular expanded polyurethane). Grid: Reinforcement grid as the air outlet. 4 Average Efficiency % (Em): 95% < Em. EN779 Class: F7, F8 and F9. EPA/HEPA ISO 16890: ePM1 60%, ePM1 65% and ePM1 85%. /ULPA Recommended Final Pressure Drop:600 Pa. Temperature: 80ºC continuous service. 5 Humidity: 100% RH. HIGH References TEMPERA- Reference Dimensions EN *ME ISO 16890 Filtering Nominal Initial Energy Energy Energy Unit weigth UxP S TURE BxHxP 779 % Surface flow Pa Class Cons. Cons. Volume (Kg) * * Class ePM1 90% (m3/h) 16890 kWh/ kWh/ 6 ePM1 90% (m2) **** year year (m3) ePM1 90% 779 16890 EQUIP- ePM1 65% 32 MENTS ePM1 65% 27 * ** ePM1 65% 16 7 MVTG242417F9 592x592x440 F9 78 ePM1 55% 32 3400 93 A+ 1200 1189 0.16 12 1 F MVTG202417F9 592x492x440 F8 65 ePM1 55% 27 MOTORS MVTG122417F9 592x292x440 F7 54 ePM1 55% 16 2800 A+ 0.13 9 1 F AND MVTG242417F8 592x592x440 32 MVTG202417F8 592x492x440 27 1700 A+ 0.08 6 1 F TURBINES MVTG122417F8 592x292x440 16 MVTG242417F7 592x592x440 3400 85 A 950 860 0.16 12 1 F 8 MVTG202417F7 592x492x440 MVTG122417F7 592x292x440 2800 A 0.13 9 1 F ADSOR- TION AND 1700 A 0.08 6 1 F DEODO- RIZATION 3400 70 A+ 790 792 0.16 12 1 F 9 2800 A+ 0.13 9 1 F INTER- 1700 A+ 0.08 6 1 F NATONAL *UxP *Stock *ME%: Minium Efficiency to EN779:2012 REGU- Units per box F: Manufacture, S: Stock, SL: Limited Stock LATION Venfilter 232 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com

Motors and turbines Dimensions 0 Certification Multiven Turbine Epa INFORMA- TION Filters for turbines 1 Gas turbine air inlet. PRE- Technical features FILTERS Type: Compact Polyhedral Rigid Bag Filter. 2 Frame: Polystyrene. Filtering Element: Fiberglass paper. PAINTING Separators: Thermoplastic glue beads BOOTHS Sealant: Bases, side and front sealed with Polyurethane. Gasket: Bicomponent polyurethane liquid system (Semi- 3 circular expanded polyurethane). Grid: Reinforcement grid as the air outlet in the model COMFORT MVTG, the model MVTGSR does not include safety grid. PRODUCTS MPPS Efficiency: 85%. EN1822 Class: E10. 4 Recommended Final Pressure Drop: 450 Pa. Temperature: 80ºC continuous service. EPA/HEPA Humidity: 100% RH. /ULPA References 5 Reference Model Dimensions Class Filtering Nominal Initial Unit Weigth MPPS UxP S HIGH BxHxP EN 1822 Surface flow Pa Volume TEMPERA- MVTG242412H10 (m3/h) 185 (Kg) Efficiency % * * MVTG202412H10 (m2) 4250 (m3) TURE MVTG122412H10 MV-TG 592x592x292 E10 19 3500 185 0.11 5 85 1 F MVTGSR242412H10 MV-TG 592x492x292 E10 15 2125 0.09 4 1F 6 MVTGSR202412H10 MV-TG 592x292x292 E10 8.5 4250 200 0.06 3 1F MVTGSR122412H10 MV-TG 592x592x292 19 3500 0.11 5 85 1 F EQUIP- MVTG24241217H10 MV-TG 592x492x292 15 2125 0.09 4 1F MENTS MVTG202417H10 MV-TG 592x292x292 8.5 5400 0.06 3 1F MVTG122417H10 MV-TG 592x592x440 32 4500 0.16 12 85 1 F 7 MV-TG 592x492x440 27 2700 0.13 9 1F MV-TG 592x292x440 16 0.08 6 1F MOTORS AND *UxP *Stock Units per box F: Manufacture, S: Stock, SL: Limited Stock TURBINES Venfilter [email protected] 233 8 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

0 Motors and turbines INFORMA- Duraven TION Filters for turbines 1 Designed for air suction in gas turbines, compressors, PRE- centrifuges, machinery and places where there is consi- FILTERS derable vibrations. 2 Technical features Dimensions PAINTING Type: Compact Filter with High Efficiency aluminum separators. BOOTHS Frame: Galvanized Steel with two bridles or flanges. Filtering Element: Glass microfiber paper. 3 Separators: Corrugated (Fluted) aluminum separator. Sealant: Polyurethane. COMFORT Clamp or flange: Galvanized Steel. PRODUCTS Grid: Grid on both sides. Gravimetric Efficiency: 98% and 99.95% 4 Average Efficiency % (Em): 60% ≤ Em < 80% and 90% ≤ Em < 95%. EPA/HEPA EN 779 Class: M6 and F8. /ULPA ISO 16890: ePM10 70% and ePM1 70%. Recommended Final Pressure Pressure Drop: 600 Pa. 5 Temperature: 80ºC continuous service. HIGH References TEMPERA- Reference Dimensions EN 779 *ME ISO 16890 Filtering Nominal Nominal Unit Weight UxP S TURE BxHxP Class % Surface Flow Flow volume (Kg) ** 6 (m2) (m3/h)/Pa (m3/h)/Pa (m3) EQUIP- MENTS DU242412F8 595x595x292 F8 71 ePM1 70% 12 3400/170 4250/150 0.11 8,2 1 F 7 DU242412F6 595x595x292 M6 ePM10 70% 12 3400/130 4250/110 0.11 8,2 1 F MOTORS *UxP *Stock *ME%: Minium Efficiency to EN779:2012 AND Units per box F: Manufacture, S: Stock, SL: Limited Stock TURBINES Venfilter 8 234 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

Motors and turbines 0 Cartridges turbines INFORMA- TION Filters for turbines 1 Air inlet of gas turbines, compressors and engines. PRE- FILTERS Technical features Dimensions 2 Type: High Efficiency self-cleaning cartridge. PAINTING Frame: Upper and lower cover. BOOTHS Construction: Interior and upper collectors in expanded gal- vanized steel. 3 Filtering Element: Mixture of resin-impregnated cellulose and synthetic fibers. COMFORT Sealant: Resin resistant to high temperatures and stable un- PRODUCTS der the action of chemical agents. Gasket: Circular neoprene seal with a triangular section glued 4 on the top cover. Separators: Thermoplastic glue (hotmel) spacers. EPA/HEPA Average Efficiency % (Em): 95% Em /ULPA EN 779 Class: F9. Recommended Final Pressure Pressure Drop: 1500 Pa. 5 Temperature: 80ºC continuous service. References Reference Model Diameters (mm) Average Efficiency EN 779 EN Filtering Nominal Initial Unit Weight UxP S HIGH efficiency % (MPPS E Class 1822 Surface flow Pa Volume (Kg) * * TEMPERA- CTG324560-SGF9 CF-TG 324x215x560 Class CTG324700-SGF9 CF-TG 324x215x700 (Em) %) F9 (m2) (m3/h) (m3) F TURE CTG324660-K1+ CF-TG (445/324x660) + 96% F9 F CTG445324660-K1 CF-TG 96% F9 17 950 190 0,07 7 1 F 6 CTG324660-SGF9+ CF-TG (324x660) 97% CTG445324660-SGF9 CF-TG (445/324X660) + 22 1175 190 0,09 8,3 1 EQUIP- CTG324660-F9+ 96% MENTS CTG445324660-F9 (324x660) 48 2600 163 0.22 16 1 CTG324660-E10+ (445/324x660) + 98% 7 CTG445324660-E10 F9 45 2600 146 0.22 16 1F (324x660) MOTORS (445/324x660) + F9 45 2600 137 0.22 16 1F AND (324x660) 85% E10 45 2600 143 0.22 16 1F TURBINES *UxP *Stock 8 Units per box F: Manufacture, S: Stock, SL: Limited Stock Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DEODO- RIZATION 9 [email protected] 235 INTER- www.venfilter.com NATONAL REGU- LATION

0 Motors and turbines INFORMA- General Information Filter surface TION TG Cartridge Filters have been designed to work in extreme working condi- 1 tions in the aspiration of gas turbines, generators and other rotary-operation equipment, for high performance work cycles in urban, industrial, interior, PRE- marine and coastal environments. FILTERS 2 TG cartridges are available in a wide range of sizes in order to meet the needs of our clients. PAINTING A wide longe of filter media is available in order to ensure effective perfor- BOOTHS mance in specific operational conditions, with 99.8% efficacy in all cases, and capable of retaining particles of up to 0.5 microns. 3 Construction COMFORT The filter media used for TG Cartridge production may be: PRODUCTS 4 S: Synthetic filter media. K1: Synthetic and cellulose mixture. EPA/HEPA F: Water-repellent micro fiberglass media. /ULPA SG-F9: Synthetic and fiberglass media. H: Hepa filter media. 5 The uniform separations between filter media folds are maintained with the use of perimeter bands of melted adhe- sive that is applied heated to interior and exterior fold surfaces. This ensures constant form and distances between HIGH the folds, maintaining the original characteristics of the fold for long periods of time, while optimising the effective TEMPERA- use of the filter surface. The cartridges include inner and outer expanded galvanized metal covers or protections in order to guarantee the safety of the media, while maximizing both the filter surface and dust accumulation capacity. TURE A thermoplastic seal is also made in order to prevent leakages between the galvanized covers at the ends of the filter packet, resulting in a unified product. 6 These filters are assembled securely using a circular polyurethane gasket. EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- 236 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DEODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL REGU- LATION

Motors and turbines 0 Filter Media with respect to Turbines K1 SG-F9 INFORMA- TION Filter media recommended for turbine operational a a conditions a 1F a a URBAN AND INDUSTRIAL AREAS: PRE- Heavy airborne hydrocarbons, various particle sizes a FILTERS (large and small). INDUSTRIAL SG-F9 a Major concentrations of large and small particles. a a2 MARINE Coastal, humid atmospheres, moisture-laden air PAINTING DESERT a BOOTHS Arid, high dust concentrations, sandy, very fine parti- cles. 3 ARCTIC Very cold, dry air, all humidity is transformed into COMFORT frost and builds up on the filter. a PRODUCTS Cleaning Impulsion System K1 4 Filter media recommended filter cleaning. a (Self-cleaning system) EPA/HEPA /ULPA F 5 Applications HIGH TEMPERA- Suitable for filter inlet, outlet filtration and recirculation in ventilation systems that require high safety levels with respect to clean air, such as: TURE • Cogeneration and power generation plants for gas turbines (air combustion, turbine ventilation, alter nator ventilation and room ventilation in some cases) 6 • Cogeneration plants for motors (air combustion, and room ventilation in some cases) • Compressors used for air fractionation in the production of gases (oxygen, etc.), the production of EQUIP- compressed air and gas pumping stations (air supply or room ventilation). MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DEODO- RIZATION 9 [email protected] 237 INTER- www.venfilter.com NATONAL REGU- LATION

0 Motors and turbines INFORMA- TION 1 EFFICACY – PARTICLE SIZE IN MICRONS PRE- Filter CTG324660-k1 + CTG445324660-K1 Efficacy in % terms FILTERS (Cylindrical + Conical) Aerosol Test: DEHS 2 Filtration Surface: Synthetic and cellulose mixture. Air Flow: 0.722 m3/s. PAINTING BOOTHS Initial Efficacy: 163 Pa Efficacy after the1st dust load: 250 Pa Efficacy after the 2nd dust load: 350 Pa Efficacy after the 3rd dust load: 450 Pa Particle size (microns) 3 Filter CTG324660-SGF9 + CTG445324660-SGF9 Efficacy in % terms (Cylindrical + Conical) COMFORT Aerosol Test: DEHS PRODUCTS Filtration Surface: Mixture of synthetic fibers impregnated with resin and fiberglass 4 Air Flow: 0.722 m3/s. EPA/HEPA Initial Efficacy: 146 Pa Particle size (microns) /ULPA Efficacy after the1st dust load: 250 Pa Filter Efficacy after the 2nd dust load: 350 Pa 5 Efficacy after the 3rd dust load: 450 Pa Efficacy in % terms HIGH Aerosol Test: CTG324660-F9 + CTG445324660-F9 (Cylin- TEMPERA- Filtration Surface: drical + Conical) Air Flow: TURE DEHS 6 Fiberglass 0.722 m3/s. EQUIP- MENTS Initial Efficacy: 137 Pa Efficacy after the1st dust load: 250 Pa Efficacy after the 2nd dust load: 350 Pa Particle size (microns) Efficacy after the 3rd dust load: 450 Pa 7 Filter Efficacy in % terms CTG324660-H10 + CTG445324660-H10 MOTORS Aerosol Test: (Cylindrical + Conical) AND Filtration Surface: DEHS Air Flow: Hepa fiberglass. TURBINES 0.722 m3/s. 8 Initial Efficacy: 143 Pa Efficacy after the1st dust load: 250 Pa ADSOR- Efficacy after the 2nd dust load: 350 Pa TION AND Efficacy after the 3rd dust load: 450 Pa DEODO- RIZATION Particle size (microns) 9 Venfilter Tel +34 937 862 607 INTER- 238 Fax +34 937 862 493 [email protected] NATONAL www.venfilter.com REGU- LATION

Motors and turbines 0 TECHNICAL CHARACTERISTICS INFORMA- TION TG Filters are available in a wide range of sizes in order to meet the requirements of our clients, and may be supplied in the two most commonly-used formats: CYLINDRICAL AND CONICAL. 1 The most commonly-used cartridge heights are: PRE- • Cylindrical: 560, 600, 660 and 700 mm FILTERS • Conical: 660 mm. 2 Venfilter Reference: CTG324560-SGF9 PAINTING External Diameter 324 mm BOOTHS Interior Diameter Height: 215 mm 3 Filtration media: 560 mm Mixture of synthetic fibers impregnated with resin COMFORT Filtration surface and fiberglass PRODUCTS 17 m2 4 Nominal flow: 950 m3/h. EPA/HEPA Efficacy 96% Ashrae Dust Spot /ULPA Class according to EN 779: F9 5 Venfilter Reference: CTG324660-F9 HIGH TEMPERA- External Diameter 324 mm Interior Diameter 215 mm TURE Height: 660 mm Filtration media: fiberglass 6 Filtration surface 20 m2 1100 m3/h. EQUIP- Nominal flow: MENTS 98% Ashrae Dust Spot Efficacy 7 F9 Class according to EN 779: MOTORS AND Venfilter Reference: CTG324660-K1 TURBINES External Diameter 324 mm Interior Diameter 215 mm 8 Height: 660 mm Filtration media: Mixture of cellulosic and synthetic fibers impregna- ADSOR- ted with resin. TION AND Filtration surface 20 m2 DEODO- Nominal flow: RIZATION 1100 m3/h. 9 Efficacy 95% Ashrae Dust Spot INTER- Class according to EN 779: F8 NATONAL Venfilter [email protected] 239 REGU- Tel +34 937 862 607 www.venfilter.com LATION Fax +34 937 862 493

0 Motors and turbines INFORMA- TION 1 TECHNICAL CHARACTERISTICS PRE- Venfilter Reference: CTG324700-SGF9 FILTERS External Diameter 324 mm 2 Interior Diameter 215 mm Height: 700 mm PAINTING Filtration media: Mixture of synthetic fibers impregnated with resin BOOTHS and fiberglass Filtration surface 22 m2 Nominal flow: 1100 m3/h. Efficacy 96% Ashrae Dust Spot 3 Class according to EN 779: F9 COMFORT PRODUCTS 4 Venfilter Reference: CTG324862-K1 Installation Bayoneta Exterior Diameter 324 mm EPA/HEPA Interior Diameter 215 mm /ULPA 862 mm Height: 5 Filtration media: Mixture of cellulosic and synthetic fibers Filtration surface impregnated with resin. 25 m2 HIGH Nominal flow: 1360 m3/h. TEMPERA- Efficacy 95% Ashrae Dust Spot Class according to EN 779: F8 TURE 6 EQUIP- Venfilter Reference: CTG404/360660-K1 MENTS Superior Platform 404 / 324 7 Exterior Diameter 324 mm Interior Diameter 215 mm MOTORS Height: 660 mm AND Filtration media: Mixture of cellulosic and synthetic fibers impregnated with resin. TURBINES Filtration surface 20 m2 Nominal flow: 8 1100 m3/h. ADSOR- Efficacy 95% Ashrae Dust Spot TION AND DEODO- Class according to EN 779: F8 RIZATION Venfilter 9 Tel +34 937 862 607 Fax +34 937 862 493 INTER- 240 [email protected] NATONAL www.venfilter.com REGU- LATION

Motors and turbines 0 INFORMA- TION Filter References: 1 CTG324660-K1 + CTG445324660-K1 (Cylindrical + Conical) Filtration Surface: Mixture of cellulose and synthetic fibers. PRE- FILTERS Exterior Diameter 1 445 mm 2 Interior Diameter 1 332 mm PAINTING Exterior Diameter 2 324 mm BOOTHS Interior Diameter 2 215 mm 3 Total Height: 1345 mm COMFORT PRODUCTS Filtration media: Mixture of cellulose and synthetic fibers impregnated with resin. 4 Filtration surface 48 m2 EPA/HEPA /ULPA Nominal flow: 2600 m3/h. 5 Initial Pressure Difference in Pa 163 HIGH Efficacy 97% Ashrae Dust Spot TEMPERA- Class according to EN 779: F9 TURE Filter References: CTG324660-SGF9 + CTG445324660-SGF9 (Cylindrical + Conical) Filtra- tion Surface: Mixture of synthetic fibers impregnated with resin and fiberglass Exterior Diameter 1 445 mm Interior Diameter 1 332 mm Exterior Diameter 2 324 mm Interior Diameter 2 215 mm Total Height: 1345 mm Filtration media: Mixture of synthetic fibers impreg- Filtration surface nated with resin and fiberglass 45 m2 Nominal flow: 2600 m3/h. Initial Pressure Difference in Pa 146 Efficacy 96% Ashrae Dust Spot Class according to EN 779: F9 Filter References: Filter References: 6 CTG324660-F9 + CTG445324660-F9 (Cylindrical + Conical) Filter CTG324660-H10 + CTG445324660-H10 (Cylindrical + Conical) Filter Surfa- Surface: Fiberglass. ce: Hepa fiberglass. Exterior Diameter 1 445 mm Exterior Diameter 1 445 mm EQUIP- Interior Diameter 1 332 mm Interior Diameter 1 332 mm MENTS Exterior Diameter 2 324 mm Exterior Diameter 2 324 mm 7 Interior Diameter 2 215 mm Interior Diameter 2 215 mm Total Height: 1345 mm Total Height: 1345 mm MOTORS Filtration media: Fiberglass. Filtration media: Hepa fiberglass. AND Filtration surface 45 m2 Filtration surface 45 m2 Nominal flow: Nominal flow: TURBINES 2600 m3/h. 2600 m3/h. Initial Pressure Difference in Pa 137 Initial Pressure Difference in Pa 143 8 Efficacy 98% Ashrae Dust Spot Efficacy 100% Ashrae Dust Spot Class according to EN 779: F9 Class according to EN 779: E10 Operational limit: ADSOR- - Pressure Drop of recommended final load: 1500 Pa TION AND DEODO- Venfilter RIZATION Tel +34 937 862 607 Fax +34 937 862 493 9 [email protected] 241 INTER- www.venfilter.com NATONAL REGU- LATION

0 Adsortion and desodorization INFORMA- TION 1 We protect all environments PRE- Global keyFILTERS 2 PAINTING BOOTHS 3 COMFORT PRODUCTS 4 242 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com EPA/HEPA Fax +34 937 862 493 /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION

Adsortion and desodorization 0 ¿Why molecular filtration? INFORMA- TION In the industrial world, molecular pollution represents a major threat since the air we breathe is inevitably po- lluted by invisible chemical pollution. 1 Industry, vehicles and places where energy is generated emit chemicals that continually challenge our environ- PRE- ment. Inside buildings or in work and leisure places, people are exposed to chemical pollutants, these can be FILTERS dispersed and cause environmental dyears in wide areas, in addition to harming people and the environment in general, air pollution can cause irreversible dyears to seemingly inert objects, such as museum artifacts and 2 paintings. Typical Applications PAINTING BOOTHS COMFORT CLEAN PROCESS SECURITY and PROTECTION 3 APPLICATION POLLUTANT APPLICATION POLLUTANT APPLICATION POLLUTANT COMFORT PRODUCTS Building Chemicals from Microelectronics Acids Manufacture of Isocyanates. Ventilation external sources: Bases, ammonia polyurethane 4 - Smoke from vehicular Condensable, VOC foam. traffic Dopants EPA/HEPA - Energy generation /ULPA - Waste incineration - Industry 5 Sulfur dioxide, Nuclear power Iodine-131 HIGH oxides of generation TEMPERA- Building Chemicals from Museums nitrogen, ozone Ventilation internal sources: TURE - Decoration materials - Cleaning products Pasta and paper Sulfur dioxide Waste transfer Smells like - Photocopiers hydrogen sulfide stations. garbage - Flame retardants chlorine Manufacture of Various toxic pesticides agents. Control mechanisms 6 There are different processes involved in the general removal mechanism of gas or vapor molecules from the EQUIP- air. It is important to understand how they are involved in each application and how they can be positively or ne- MENTS gatively influenced by other factors. In all applications it is essential for an effective solution to have a material with a high internal surface area, a suitable pore structure and an appropriate surface chemistry. 7 Factors that affect to the performance MOTORS AND - Raw material - Temperature TURBINES - RH - Concentration 8 - Impregnated media Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DEODO- RIZATION 9 [email protected] 243 INTER- www.venfilter.com NATONAL REGU- LATION

0 Adsortion and desodorization INFORMA- TION General Information 1 Activated charcoal, which is practically pure charcoal with an enormous porosity, is able to trap certain types of molecules in its walls due to a physiochemical phenomenon known as ‘adsorption’. In this process, the activated PRE- charcoal is the ‘adsorbent’ and the molecule retained is the ‘adsorbate’. In order to be effectively adsorbed into an FILTERS activated charcoal material, an adsorbate must have the following characteristics: 2 (a) It must be able to fit inside the charcoal pores. (b) The diameter of the molecule must not be less than 20% of the diameter of the majority of the PAINTING activated charcoal pores. BOOTHS (c) It must have a molecular weight greater than 55. (d) Be non-polar or only slightly polar. 3 Most organic compounds fulfil these requirements, which is why activated charcoal is used in gas and liquid purifi- cation processes, where the contaminants are organic molecules. COMFORT PRODUCTS In the case of gas purification, the possibility exists of subjecting the charcoal to a treatment that allows it to re- tain molecules that do not fulfil these characteristics (a), (b) and (c), as in the case of mineral acids (hydrochloric, 4 sulphuric, nitric, phosphoric, etc.), ammonia, low-molecular weight amines, formaldehyde, isopropyl alcohol, mer- cury, etc. The treatment consists of binding a reagent to the surface of the charcoal, which then reacts with the molecule to be retained. This means that the activated charcoal provides the surface area and the retention is made by chemical adsorption or ‘chemisorption’. Applications EPA/HEPA Air conditioning /ULPA Solvent recovery Industrial pollution control 5 Vehicle canisters Masks HIGH Kitchen hoods TEMPERA- Compressed air purification Refrigerator deodorisation TURE Hydrogen purification (retaining hydrocarbons and organic chlorides) Helium purification 6 Acetylene purification (retaining arsine, phosphine, stibine or benzene) Carbon monoxide purification (retaining toluene) Carbon dioxide purification (retaining benzene toluene from compressor oil) EQUIP- Charcoal Particle Size MENTS 7 Activated charcoal may be manufactured in three different manners, in accordance with its form: Granular MOTORS Pelletized AND Powdered In air and gas purification the first and second forms are used, in the following sizes: TURBINES 4x10 for beds with over 5 cm. thickness 12x20, 14x30 for beds with thicknesses between 2 and 5 cm (e.g. masks) 8 In the case of pellet charcoal: 3 or 4 mm in diameter, for beds with thicknesses over 5 cm. ADSOR- Less than 3 mm for with thicknesses between 2 and 5 cm. TION AND DEODO- Venfilter RIZATION 244 Tel +34 937 862 607 [email protected] 9 Fax +34 937 862 493 www.venfilter.com INTER- NATONAL REGU- LATION

Adsortion and desodorization 0 Conditions that reduce adsorption capacity INFORMA- TION High Temperature High humidity levels (relative to air) 1 Moisture in the charcoal PRE- Adsorber Design Parameters FILTERS Surface speed of air or gas: must be between 10 and 30 m per min. 2 Contact time: divide the volume of the charcoal bed (litres) by the volumetric air or gas flow (litres per min.). Recommended rates: PAINTING 0.1 second. Low concentrations BOOTHS 2 to 7 seconds. Other cases Hourly renewals: 6 to 30 air changes in order to maintain a well-ventilated location. 3 Index adsorption capacity of activated charcoal in gas phase COMFORT PRODUCTS Of the pollutants listed, some are specific chemical compounds. Others represent a class of compounds and others are mixtures of a variable composition. The capacity of the activated charcoal for odors varies with respect to their 4 concentration, in addition to air humidity and temperature. EPA/HEPA A= High capacity (the charcoal retains 20% to 50% of its weight). /ULPA B= Satisfactory capacity (retains 10% to 25% of its weight). C= Sufficient capacity to provide proper service under specific operational conditions, which must be analysed. 5 D= Low capacity. The activated charcoal does not provide a proper service under ordinary operational conditions. HIGH Essential oils A Borane B Diethylamine * B TEMPERA- Rancid oils A Brea tar and tar A Diethyl ketone A Acetaldehyde * C Bromine A Dimethylaniline A TURE Amide Acetate A Ethyl bromide A Dioxane A Butyl Acetate A Hydrogen bromide * C Sulphur dioxide * C 6 Cellosolve acetate A Methyl bromide B Charcoal dioxide * D Ethyl acetate A Butadiene B Nitrogen dioxide * C EQUIP- Isopropyl acetate A Butane C Dipropyl ketone A MENTS Methyl cellosolve acetate A Butanone A Charcoal disulphide A Methyl acetate B Butyl cellosolve A Ethane D 7 Propyl acetate A Butylene * C Ether B Acetylene * D Butyne * C Amyl ether A MOTORS Acetone B Butyraldehyde * B Butyl ether A AND Acetic acid A Cellosolve A Dichloroethene A Acrylic acid A Hydrogen cyanide * C Ethyl ether B TURBINES Butyric acid A Cyclohexane A Isopropyl ether A Caprylic acid A Cyclohexanol A Methyl ether B 8 Carbolic acid A Cyclohexanone A Propyl ether A Formic acid * B Cyclohexene A Ethyl mercaptan A ADSOR- Lactic acid A Chorine B Ethylamine * B TION AND Nitric acid B Chlorobenzene A Ethylbenzene A DEODO- Palmitic Acid A Chlorobutadiene A Ethylene chlorhydrin A RIZATION Propionic Acid A Chloroform A Ethylene * D Sulphuric acid A Chloro-pro-propane A Eucalyptol A 9 Uric acid A Chloropicrin A Phenol A Valeric acid A Butyl chloride A Fertilisers A INTER- Methyl acrylate A Ethyl Chloride B Fluorotrichloromethane B NATONAL Venfilter [email protected] 245 REGU- Tel +34 937 862 607 www.venfilter.com LATION Fax +34 937 862 493

0 Adsortion and desodorization INFORMA- Ethyl acrylate A Hydrogen chloride * C Hydrogen fluoride * C TION Acrylonitrile A Methylene Chloride A Formaldehyde C Acrolein * B Methyl Chloride B Ethyl format B 1 Adhesives A Propyl Chloride A Methyl Form B Masking agents A Vinyl chloride B Phosgene B PRE- Camphor A Liquid fuels A Ripening fruit A FILTERS Amyl alcohol A Cleaning Compounds A Gangrene A Butyl alcohol A Cresol A Car exhaust gas B 2 Wood Alcohol B Crotonaldehyde A Corrosive gases B Ethyl alcohol A Dean A Toxic gases B PAINTING Isopropyl alcohol A Deodorants A Gasoline A BOOTHS Methyl alcohol B Scrap Wastes A Burned fat A Propyl alcohol A Industrial waste B Lubricating greases and oils A 3 Valeric aldehyde A Disinfectants A Heptane A Tar A Detergents A Heptylene A COMFORT Amines * C Dibromoethane A Hexane B PRODUCTS Ammonia * C Dichlorobenzene A Hexylene * B Anaesthetics B Dichlorodifluoromethane A Hexane * B 4 Acetic anhydride A Dichloroethane A Hydrogen D Aniline A Dichloroethylene A Smoke A EPA/HEPA Anticópricos A Dichloromonofluoromethane B Incense A /ULPA Aroma of flowers A Dichloronitroethane A Indole A Food scents A Dichloropropane A Irritants A 5 Aromatisers A Dichlorotetrafluroethane A Isophorone A Alcoholic drinks A Ethyl dichloride A Isoprene * B HIGH Soaps A Smell of melon A Waste products B TEMPERA- Sour milk A Smell of plastic A Decomposing products A Calcined materials A Smell of cheese A Products used for embalming A TURE Menthol A Animal odor B Products for radiation protection C Mercaptans (thiols) A Smell of tobacco smoke A Propane C 6 Mercury * A Popcorn / sweets Propyl mercaptan A Methane D smell A Propylene * C EQUIP- Methyl butyl ketone A Body odor A Tip C MENTS Methyl ethyl ketone A Bird odors A Propionaldehyde * B Methyl isobutyl ketone A Bath odors A Putrescine A 7 Methyl mercaptan A Butcher’s shop smells B Kerosene A Methyl cellosolve A Citrus and other Organic chemicals A MOTORS Methylcyclohexane A fruit A Resins A AND Methylcyclohexanol A Cooking odors A Burned blood A Methylcyclohexanone A Cooking odors A Hydrogen Selenide * C TURBINES Methyl Chloroform B Combustion smells B Ethyl silicate A Mould B Drain odors A Smog A 8 Monochlorobenzene A Embalming odors A Bleaching solutions * B Monofluorotrichloromethane A Hospital odors A Solvents B ADSOR- Styrene monomer A Photo development lab smell B Sweat A TION AND Charcoal monoxide D Liquor smell A Dimethyl sulphate A DEODO- Coal tar naphtha A Makeup smell A Hydrogen sulphide * B RIZATION Petroleum naphtha A Pet odors A Substances in putrefactionDe- B Naphthalene A Decayed paper odors A composing substances A 9 Naphthalene A Smell of fish A Tetrachloroethane A Nicotine A Smells of paint A Tetrachlorethylene A Nitro benzene A Cleaning product Carbon tetrachloride A Nitro ethane A smells A Toluene A Nitro-glycerine A Medicinal odors A Tolidine A Nitromethane A Mixed smells A Trichloro ethane A INTER- 246 Venfilter [email protected] NATONAL Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 REGU- LATION

Adsortion and desodorization 0 INFORMA- TION Nitropropane A Persistent odors A Trichlorethylene A Nonane A Stale odors A Sulphur trioxide * 1B Octalene A Ethylene oxide B Turpentine Octane A Mesityl oxide A Urea A Odorizes A A Tarmac fumes A Garlic smell A Ozone A Animal odor B B Paradichlorobenzene A Varnish fumes A PRE- Smell of dead animals A Adhesives A Fuel fumes C FILTERS Smell of roast meat A Onion smell A Pentane B Diesel fumes A Sour cabbage smell A Pentanone A Exhaust fumes 2B Smell of decomposed food A Pen ethylene * B Vinegar Smell of burnt food A Pentene * B B Xylene A Odor of rubber A A Smell of cigarette smoke A Perchlorethylene A Iodine A Perfumes and cosmetics A Iodoform A PAINTING Pyridine A Hydrogen Iodide * B BOOTHS Pollen B 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DEODO- RIZATION 9 [email protected] 247 INTER- www.venfilter.com NATONAL REGU- LATION

0 Adsortion and desodorization Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com INFORMA- 248 Fax +34 937 862 493 TION 1 PRE- FILTERS 2 PAINTING BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DEODO- RIZATION 9 INTER- NATONAL REGU- LATION