Race 2022

|| Gauge Panel Kits • All panels come with LED warning lights, senders and instructions • Panels available with: Stewart Warner Racing, Speedway, Autometer Sport - Comp, Auto Meter Pro-Comp Liquid Filled, Auto Meter Ultra Lite, Pro Comp or Auto Meter Ultra-Nite gauges • Includes an easy-to-hook-up wiring harness • Fuel and oil pressure lines sold separate of panel kits D | THREE AND FOUR-GAUGE PANELS WITH FUEL PRESSURE - Oil pressure 0-100 psi - Fuel Pressure 1-15 psi - Water temp. 100-265°F Stewart Warner, 140-280°F Auto Meter, 100-280°F Speedway 913-65434 SPEEDWAY 3-GAUGE $21699 EA A | TWO-GAUGE PANELS 913-65436 SPEEDWAY 4-GAUGE 18799 EA - Oil pressure 0-100 psi 913-65448 AUTO METER SPORT-COMP 36999 EA - Water temp. 100-265°F Stewart Warner, 913-65458 AUTO METER LIQUID FILLED 41399 EA 140-280°F Auto Meter, 100-280°F Speedway 913-65468 AUTO METER ULTRA-LITE 39399 EA 913-65430 SPEEDWAY 913-65478 AUTO METER ULTRA-NITE 47899 EA 913-65446 AUTO METER SPORT-COMP AUTO METER LIQUID FILLED $14599 EA 913-65466 AUTO METER ULTRA-LITE 23499 EA 913-65476 AUTO METER ULTRA-NITE 28499 EA 24999 EA 33599 EA E | ELITE WATERPROOF B | THREE-GAUGE PANELS GAUGE SET PANEL WITH OIL TEMPERATURE - New waterproof design eliminates the need to remove - Oil pressure 0-100 psi gauges before you wash your car - Oil temperature 140-325°F - LED backlit numbers and illuminated pointers - Water temp. 100-265°F Stewart Warner, 140-280°F Auto Meter, - Custom set your warnings and brightness 100-280°F Speedway - Backlight changes color based on the warning - Panels are completely wired and ready for quick installation - All sensors are included - Approved in most sanctioning bodies, including IMCA 475-44573 3 GAUGE PANEL - OP/WT/OT WITH TACH $72499 EA 913-65432 SPEEDWAY $21899 EA 913-65447 AUTO METER SPORT-COMP 36999 EA 913-65457 AUTO METER LIQUID FILLED 46799 EA 913-65467 AUTO METER ULTRA-LITE (GAUGES SHOWN ABOVE) 39499 EA 913-65477 AUTO METER ULTRA-NITE 43899 EA F | GAUGE KITS C | IMCA MODIFIED FIBERGLASS 4-GAUGE DASH PANELS - Stewart-Warner – kit includes 21/16” standard oil pressure 0-100 psi and 100° F-250° F water temperature gauges - 33” wide and 9” deep - Speedway – kit includes 25/8” standard oil pressure 0-100 - Designed to fit four 25⁄8” gauges and a tachometer in the middle pressure and 100° F-280° F water temperature gauges - Available in Black and White - Both kits include an aluminum gauge panel 940-8300 STEWART WARNER $11499 KIT 910-54061 $9699 EA 940-8301 SPEEDWAY (SHOWN) 6699 KIT 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 299

ELECTRICAL || Gauges and Tachometers YOU GET A CHROME BEZELED GAUGE AND TWO SNAP-ON GAUGE BEZELS IN BLACK AND SILVER! A | 25⁄8\" GAUGES - Lightweight 25⁄8” Speedway Motors gauges feature a chrome bezel, but we have included two snap on bezels in black and silver that allow you to customize your panel - The backlit, white face makes these gauges easy to read - Also included with the gauge is a mounting bracket with all the necessary hardware and complete installation instructions OIL PRESSURE WATER TEMPERATURE OIL TEMPERATURE FUEL PRESSURE 1 910-65013 0-100 PSI $3099 EA 2 910-65016 100°-280°F $2899 EA 3 910-65019 100°-280°F $2799 EA 4 910-65011 0-15 PSI $2899 EA B | TACHOMETERS ­ DESCRIPTION MEMORY IGNITION MAX. RPM SHOWN WATER PRICE PART # FACE SIZE SWITCH TYPE RESISTANT $46399 EA 1 182-6601 AUTO METER PRO COMP 33⁄4” REMOTE STD/ELECT 10000 YES 49299 EA 2 182-6801** AUTO METER PRO COMP (IN DASH) 5” YES 42999 EA 3 182-6809 AUTO METER PRO COMP (PEDESTAL) 5” FACE MOUNT STD/ELECT 10000 YES 10199 EA YES 22299 EA 4 182-2301* AUTO METER AUTOGAGE FACE MOUNT STD/ELECT 9000 YES 22299 EA YES 37999 EA 5 475-44381 ACCUTECH SMI SILVER 33⁄4” - STD/ELECT 8000 YES 27499 EA YES 21999 EA 41⁄2” FACE MOUNT STD/ELECT 10000 YES 475-44384 ACCUTECH SMI BLACK 41⁄2” FACE MOUNT STD/ELECT 10000 6 475-44591 LONGACRE STEPPER MOTOR - DATA LOG 4” 7 475-44477 LONGACRE STEPPER MOTOR MEMORY 41⁄2” FACE MOUNT STD/ELECT 10000 FACE MOUNT STD/ELECT 10000 475-46747 LONGACRE ELITE WATERPROOF 25⁄8” FACE MOUNT STD/ELECT 10000 * AUTO GAUGE SERIES TACHOMETER, CHROME BEZEL ** NO MOUNT BRACKET. DESIGNED FOR IN-DASH MOUNTING C | TACH ADAPTER E | VTAC FOR MAGNETOS TACHOMETER - Requires a 12V power source - Records two high and two low RPMs per lap - Displays RPMs while racing 182-9118 $12599 EA - Works with 4, 6 or 8 cylinder engines with magneto’s or standard ignitions D | TEL TAC TACHOMETER 910-82028 TACHOMETER $42999 EA - Self-contained digital tach features built-in memory 910-82036 EXTRA MOUNTING SLIDE BRACKET 12499 EA recall in a compact 31⁄8” x 31⁄8” square case 910-82037 EXTRA TACHOMETER CABLE 4499 EA - Extremely rugged construction allows it to perform in almost any racing environment F | XTREME ACCU-TACH - Tel Tac II recalls and displays the highest overall rpm for up to 30 minutes after the car is shut off - Works with 4, 6 and 8 cylinder engines using - Works on 4, 6 and 8 cylinder engines with either an MSD ignition or a magneto magnetos or distributors - Factory set for 8 cylinder engines and will function up to 15,000 rpm 910-82020 TEL TAC II $30499 EA 910-11781 $36999 EA 910-82030 TEL TAC OVAL TRACK PRO 42499 EA 910-82021 HARNESS WITH ISOLATER 3099 EA 300 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Gauges A | ELITE WATERPROOF GAUGE SET PANELS - New waterproof design eliminates the need to remove - Backlight changes color based on the warning gauges before you wash your car - Panels are completely wired and ready for quick installation - LED backlit numbers and illuminated pointers - All sensors are included - Custom set your warnings and brightness - Approved in most sanctioning bodies, including IMCA WATERPROOF SMI GAUGES WATERPROOF LED GAUGES 1 475-46744 4 475-46860 2 475-46745 WATER TEMP WITH SENSOR $17999 EA 5 475-46861 WATER TEMP WITH SENSOR $17999 EA OIL TEMP WITH SENSOR 17999 EA OIL TEMP WITH SENSOR 17999 EA 20999 EA 20999 EA 475-46741 OIL PRESSURE WITH SENSOR 20999 EA 475-46857 OIL PRESSURE WITH SENSOR 20999 EA 3 475-46742 20999 EA 6 475-46858 13999 EA 0-15 FUEL PRESSURE WITH SENSOR 20999 EA 0-15 FUEL PRESSURE WITH SENSOR 13999 EA 475-46743 0-100 FUEL PRESSURE WITH SENSOR 475-46862 0-100 FUEL PRESSURE WITH SENSOR 475-46748 0-60 WATER PRESSURE WITH SENSOR 475-46746 8-18 VOLT GAUGE E | SPORT-COMP MECHANICAL 21⁄16\" GAUGES B | AUTOGAUGE SERIES MEMORY TACHOMETER - Using a patented, high precision bourdon tube meter movement, there isn’t another gauge on the market that can lay claim to the - 10,000 RPM level of accuracy or durability you’ll find here - Pedestal mount - Face mount memory switch - Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12V high performance racing ignitions 182-33902 5\" DIAMETER $24699 EA 1 182-3311 FUEL PRESSURE GAUGE - 0-15 PSI $9399 EA C | AUTO GAGE 2 182-3312 FUEL PRESSURE GAUGE - 0-100 PSI AIR-CORE PEDESTAL 3 182-3321 OIL PRESSURE GAUGE - 0-100 PSI 9599 EA TACHOMETER GAUGE 4 182-3332 WATER TEMPERATURE GAUGE -120°-240°F 9599 EA 12999 EA - 10,000 RPM - Pedestal mount F | STEWART - White incandescent $24399 EA WARNER 182-233904 5\" DIAMETER - Mechanical 21⁄16” gauges $4699 EA - Nests in tight confines 5899 EA - Chrome bezels with black face 899 EA - 36” lead for water temperature 1 665-82209 STANDARD OIL PRESSURE 0-100 PSI 7299 EA 665-82236 STANDARD WATER TEMPERATURE, 100° F-250° F 5299 EA 940-8362 21⁄16\" GAUGE PANEL 5599 EA 665-82326 DELUXE WATER TEMPERATURE, 100° F-265° F 2 665-82323 DELUXE OIL PRESSURE 5-100 PSI 665-82320 DELUXE FUEL PRESSURE 2-30 PSI G | DASHBOARD D | ULTRA-LITE II GAUGE GROMMET SEAL MECHANICAL 21⁄16\" GAUGES - Gauge grommet will dampen vibration - Using a patented, high precision bourdon tube meter movement, and increase gauge lifeChrome bezels with black face there isn’t another gauge on the market that can lay claim to the levelof accuracy or durability you’ll find here - Features Hi-Def through-the-dial white LED lighting - Includes gauge mounting hardware and installation instructions 910-206225 21⁄16\" $1299 EA 1 182-4921 OIL PRESSURE GAUGE - 0-100 PSI $11199 EA 910-260275 25⁄8\" 1399 EA 2 182-4931 WATER TEMPERATURE GAUGE -140°-280°F 14799 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 301

ELECTRICAL || Gauges and Tachometers Individual gauges D | LED WARNING LIGHT KITS do not come with sending units - Shows problem before it becomes a hazard - Easy-to-install LEDs in standard 3⁄4” or 1” STANDARD 3⁄4” OR 1” 3⁄4” PRICE 1” PRICE 604-50606 230° WATER TEMPERATURE (AMBER) $3099 EA $3699 EA 604-50608 270° OIL TEMPERATURE (BLUE) 3399 EA 1999 EA 604-50600 20 LB. OIL PRESSURE (RED) 2399 EA 3099 EA 604-50604 ADJUSTABLE OIL PRESSURE (RED) 3599 EA 3499 EA A | LARGE 25⁄8\" 604-50610 FUEL PRESSURE (WHITE) 3099 EA 1999 EA MECHANICAL RACING GAUGES OIL PRESSURE GAUGE E | REPLACEMENT LED WARNING LIGHTS/SENDERS - 25⁄8” diameter stainless steel bezel - Available in red, white, blue or amber - Requires tubing kit 1 665-82406 5-100 PSI 604-50-COLOR STANDARD LED 3/4” LIGHT $799 EA 665-82553 TUBING KIT 604-52-COLOR MONSTER LED 1” LIGHT 1499 EA WATER TEMP GAUGE 1799 UP $5899 EA 604-51 REPLACEMENT SENDERS (SPECIFY) - 25⁄8” diameter stainless steel bezel 999 EA - Specify 60” or 72” capillary tube F | GAGELITES ENGINE 2 665-82409 100°-265°F $7499 EA WARNING LIGHT SYSTEM OIL TEMPERATURE GAUGE $8299 EA - Kit includes sender, lights, wire and terminals - 25⁄8” diameter stainless steel bezel $5699 EA OIL PRESSURE OIL PRESSURE - SENDER ONLY - With 72” capillary tube 2399 EA 475-40000 20 PSI 475-43080 20 PSI 3 665-82410 140°-325°F $3499 EA $2499 EA $6699 EA FUEL PRESSURE GAUGE 999 EA 475-40100 ADJ. 15-50 PSI 5499 EA 475-43000 ADJ. 15-50 PSI 3999 EA WATER TEMPERATURE WATER TEMPERATURE - SENDER ONLY - 25⁄8” diameter stainless steel bezel $59999 EA 475-40150 1⁄2” 230 475-43250 1⁄2” 230 - Requires braided stainless hose 6599 EA 3499 EA 2999 EA 4 665-82405 1-15 PSI 3299 EA 617-4060 HOSE KIT 475-40152 3⁄8” 230 3499 EA 475-43252 3⁄8” 230 2999 EA VACUUM GAUGE OIL TEMPERATURE OIL TEMPERATURE - SENDER ONLY 475-40350 1⁄2” 270 475-43350 1⁄2” 270 - 25⁄8” diameter stainless steel bezel 3999 EA 2999 EA - Requires tubing kit 5 665-82411 2-30 IN. MECHANICAL 475-40400 1⁄2” 300 2999 EA 475-43400 1⁄2” 300 2999 EA 665-82553 TUBING KIT FUEL PRESSURE FUEL PRESSURE - SENDER ONLY 475-40250 ADJ. 2-7 PSI 4999 EA 475-43020 ADJ. 2-7 PSI 2999 EA 475-40251 4 PSI 3999 EA 475-43021 4 PSI 1999 EA WATER PRESSURE WATER PRESSURE - SENDER ONLY 475-40141 475-43241 3999 EA 2499 EA G | BRAIDED PRESSURE GAUGE LINE KIT - Kit Includes one AN 4 to 1⁄8” NPT male fitting, one AN 4 to 1⁄8” NPT female fitting and choice of 25”, 36” or 48” long AN braided line B | MYCHRON 617-4060-SPECIFY $2399 EA 5 GPS LAPTIMER WITH SENSOR H | ANODIZED ALUMINUM FLARE - Lap and split times, speed, - Adapts 1⁄8” NPT male to AN 4 RPM and one temperature as well as position on track, 617-6042 STRAIGHT $699 EA acceleration and much more 617-6080 90° 1199 EA - Integrated GPS - Wider display J | OIL PRESSURE GAUGE - WIFI connection EXTENDED FITTINGS - Rechargeable Lithium Battery - Straight or 90°, 1/8” NPT to AN 4 910-805010 MYCHRON 5 KIT 617-4070 STRAIGHT $1599 EA 21⁄4\" 213⁄16\" 910-21865 617-4075 90° 2799 EA 910-80215 REPLACEMENT BATTERY CHARGER K | GAUGE FITTINGS C | VIPER PIPES - Female 1⁄8” NPT to either AN 3 or AN 4 1100R DIGITAL - Straight or 90° Fit Auto Meter and Stewart Warner TACHOMETER 617-4028 STRAIGHT AN 3 1⁄8” NPT $999 EA - Now for V8 applications 617-4025 STRAIGHT AN 4 1⁄8” NPT 599 EA with distributors - Digital read-out of RPMs (configurable 0-9,000 or 0- 20,000 RPMs) 617-4072 90° AN 4 1⁄8” NPT 499 EA - Bar Graph Read=out (0-9,000 or 0 -20,000 RPMs) - Programmable shift or RPM warning light L | AUTO METER WATER TEMP GAUGE ADAPTORS - Digital water temperature read-out (Farenheit or Celcius) - Programmable water temperature warning light - For all mechanical water temperature gauges 182-2271 3⁄8” NPT LONG $2199 EA 182-2272 182-2370 3⁄8” NPT ALUMINUM 1699 EA 1599 EA 182-2372 3⁄8” NPT 182-2273 960-11000 $13999 EA 1⁄2” NPT 1599 EA 1⁄2” NPT ALUMINUM 1599 EA 302 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Gauges and Tachometers Individual Individual gauges do gauges do not come with not come with sending units sending units C | 25⁄8\" SPORT-COMP GAUGES A | 25⁄8\" ULTRA-NITE OIL PRESSURE WATER TEMP GAUGES-GLOW-IN-THE-DARK - 1⁄8” NPT male fitting on back - Includes 6’ capillary tube for line hook-up - and 1⁄2” NPT fitting - Rugged mechanical movements, lightweight design - Glow-in-the-dark dials 1 182-3421 0-100 PSI $9999 EA 2 182-3431 140°-280°F $13499 EA - Waterproof 617-4060 HOSE KIT 2399 KIT 2 182-3432 120°-240°F 13999 EA OIL PRESSURE FUEL PRESSURE $11499 EA - Has 1⁄8” NPT male fitting on back for line hook-up 2399 KIT - Must use braided stainless line 1 182-4521 0-100 PSI $16099 EA 3 182-3411 0-15 PSI $9599 EA 617-4060 HOSE KIT 16499 EA 617-4060 HOSE KIT 2399 KIT WATER TEMPERATURE $16599 EA Individual gauges do - Includes 3’ or 6’ capillary tube and 1⁄2” NPT fitting not come with - 140°-280° sending units 2 182-4535 4’ CAPILLARY TUBE 2 182-4531 6’ CAPILLARY TUBE OIL TEMPERATURE - Includes 6’ capillary tube and 1⁄2” NPT fitting 3 182-4541 140°-280°F - D | 25⁄8\" PRO-COMP FUEL PRESSURE $11499 EA ULTRA-LITE GAUGES 2399 KIT 4 182-4511 0-15 PSI - Easy-to-read silver dials and high-contrast orange pointers with 617-4060 HOSE KIT aluminum and plastic construction OIL PRESSURE WATER TEMP Individual gauges do - Has 1⁄8” NPT male fitting on - Includes 6’ capillary tube not come with back for line hook-up - 1⁄2” NPT fitting sending units 1 182-4421 0-100 PSI $10599 EA 2 182-4431 140°-280°F $15299 EA 617-4060 HOSE KIT 2399 KIT FUEL PRESSURE OIL TEMPERATURE - Must use braided stainless - Includes 6’ capillary tube line #617-4060 - 1⁄2” NPT fitting 3 182-4441 140°-280°F $15799 EA 4 182-4411 0-15 PSI $10499 EA B | 25⁄8\" PRO-COMP LIQUID FILLED GAUGES 617-4060 HOSE KIT 2399 KIT - The most rugged gauges available - Designed for racing applications with extreme vibrations or violent pounding E | LS SWAP OIL PRESSURE WATER TEMP GAUGE ADAPTERS - Has 1⁄8” NPT male fitting on - Includes 6’ capillary tube back for line hook-up and 1⁄2” NPT fitting - Workss with 2 182-5431 140°-280°F $18599 EA LS platform engines 1 182-5421 0-100 PSI $12899 EA 2 182-5432 120°-240°F 18699 EA 1 182-5422 0-200 PSI 13399 EA 617-4060 HOSE KIT 2399 EA OIL PRESSURE SPEEDWAY - 16MM X 1⁄8 NPT $1399 EA OIL TEMPERATURE FUEL PRESSURE 916-80918 AUTO METER - SENDER ADAPTER 1699 EA 182-2268 - Includes 6’ capillary tube - Must use braided stainless $1399 EA and 1⁄2” NPT fitting line #617-4060 COOLANT SPEEDWAY - 12MM X 1⁄2 NPT 1399 EA - Mounting cup fits all liquid - Isolator required if mounting 916-80918 SPEEDWAY - 12MM X 1⁄8 NPT - SHORT 1399 EA filled gauges fuel pressure gauge inside car SPEEDWAY - 12MM X 1⁄8 NPT - LONG 1799 EA 3 182-5441 140°-280°F $18699 EA 916-80919 3 182-5202 MOUNT - BLACK 3399 EA 4 182-5411 0-15 PSI $11899 EA 916-80920 AUTO METER - SENDER ADAPTER 617-4060 HOSE KIT 2399 KIT 182-2277 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 303

ELECTRICAL || Switches and Components A | ALUMINUM F | WEATHERPROOF $2999 EA M | SELF ADJUSTING FLIP-UP STARTER BUTTON WIRE STRIPPER IGNITION START PANEL - Completely sealed with a - Automatically adjusts polyurethane coating to strip 24-10 AWG - 40 amp at 12 volts ignition switch with 475-45466 wire and cable aircraft style cover and pilot light - Crimps 22-10 AWG insulated andnon-insulated wire terminals - Crimps 7-8mm ignition terminals - Wire cutter - Comfortable TPR hand grips 475-44863 $6999 EA 728-11475 $2199 EA B | ALUMINUM FLIP-UP G | WEATHERPROOF N | RACHETING WIRE IGNITION SWITCH PANEL STARTER BUTTON TERMINAL CRIMPER - 40 amp at 12 volts ignition switch with - Push button with weatherproof rubber - Racheting mechanism design aircraft style cover and pilot light cover and 2 terminals - Adjustable crimping compression - Steel jaw 475-45460 $2299 EA - Color coded wire sizes: Red 22-18AWG-DIN 0.5-1.0mm 475-44869 $13999 EA H | BATTERY Blue 16-14AWG-DIN 1.5-2.5mm THRU PANEL Yellow 12-10AWG-DIN 4-6mm - For safely running battery 728-11477 $2199 EA - cable thru your firewall - Prevents shorts $1999 EA 475-45700 C | ALUMINUM FLIP-UP P | FLIP-UP COVER - Aircraft safety switch cover only START / IGNITION PANEL 475-45370 $1899 EA WITH BATTERY DISCONNECT - 40 amp at 12 volts ignition switch with aircraft style cover and pilot light J | BATTERY JUMPER 475-44871 $10999 EA POST - RED / POSITIVE Q | IGNITION SWITCH - Make it easier to jump start or W/ FLIP-UP COVER charge the battery - Heavy Duty 40 Amp Switches 475-45720 $2599 EA - Aircraft safety switch cover and 2 terminals D | CARBON 475-45470 $2599 EA FIBER FLIP-UP K | BATTERY R | WEATHERPROOF $799 EA START AND JUMPER SWITCH COVER IGNITION SWITCH PANEL POST - BLACK / NEGATIVE - Silicone rubber - High capacity ignition switch - Make it easier to jump start or 475-45300 with aircraft style cover charge the battery 475-44510 $7999 EA 475-45740 $2599 EA S | 40-AMP ELECTRIC E | CARBON RELAY KIT FIBER FLIP-UP START AND L | HEAVY DUTY IGNITION SWITCH PANEL GROUND STRAP - Use this handy 40 amp - High capacity ignition switch - Braided - 14” long - to complete relay to wire up your 12 volt horn, the installation electric fuel pump, electric fan with sensor, with aircraft style cover shaved door handles, or whatever - Contains relay, plug, wire, and instructions 475-44535 $11999 EA 475-48110 $2499 EA 910-64044 $1399 EA 304 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

A | PUSH BUTTON || Switches and Fittings STARTER K | AUTOMETER 11⁄2\" HI-VIBRATION - Rubber boot protects button PRESSURE GAUGE from moisture - Made to mount directly on the 913-64381 $999 EA engine to read fuel or oil pressure - 1⁄8” NPT male fitting $5699 EA B | DOUBLE 5699 EA THROW SWITCH 182-2175 0-15 PSI 182-2177 0-100 PSI - Single pole, double throw 1 910-64015 ON/ON $1099 EA 2 910-64016 ON/OFF/ON 1299 EA L | REMOTE 475-45423 LONGACRE WP SWITCH 2599 EA PRESSURE GAUGE C | TOGGLE “IGNITION - Remotely mount this gauge under the ON” SWITCH hood to help set the correct fuel pressure - Reads from 0-15 psi Features a 13⁄4” face - Works great as a kill switch or - and a 1⁄8” NPT fitting with other auxiliary equipment - Comes with rubber boot 910-11851 $1899 EA 913-64380 ON/OFF $1199 EA M | STAINLESS STEEL 475-45420 LONGACRE - 40 AMP 2599 EA FUEL PRESSURE GAUGE D | SAFETY KILL SWITCH - Liquid-filled, high-quality 13⁄4” gauge - Reads from 0-15 psi - Water resistant - 1⁄8” NPT connection - Pull on, push off - Silver contacts 910-11852 $2799 EA - O-ring shaft seal - 20 amp - Standard ignition only 913-64384 $2399 EA N | FUEL PRESSURE E | MAGNETO KILL 0-15 PSI GAUGE SWITCH - Fuel Pressure At A Glance - Designed for dirt racing - Easy To Read - Silver contacts, a sealed back - 0 To 15 PSI and a 23 amp rating - Fuel Pressure Gauge 940-5582 $1499 EA 425-100195ERL 0-15 PSI $2498 EA F | MAGNETO 425-100189ERL 0-15 PSI – LIQUID FILLED 3864 EA SWITCH WITH WEATHERPROOF COVER - Heavy duty 40 amp switches P | LOW PRESSURE IGNITION 475-45440 $3999 EA OR ELECTRIC FUEL PUMP SHUT-OFF SWITCH G | KEEP IT CLEAN SWITCH PANEL - Shuts off the ignition or electric fuel pump when oil pressure drops below 12 psi - Push button start - Prevents engine damage, fires, and keeps the - Battery kill switch motor from starting until the oil pressure rises - 3 Heavy duty accessory - Should be used with momentary bypass switch toggle switches with cover - Aluminum mounting plate 604-4360 PRESSURE SWITCH $3999 EA - Indicator lights 910-29085 $8599 EA Q | INLINE FUEL H | STARTER PANEL PRESSURE ADAPTER - Panel 25⁄8” x 41⁄2” - Use for inline pressure gauge - Includes 14 gauge wire - Great for fuel log, pump or regulator - Starts by flipping a switch, pushing the button 617-7000 AN 6 TO AN 6 WITH 1⁄8” NPT PORT $1399 EA AN 8 TO AN 8 WITH 1⁄8” NPT PORT 913-64385 $2099 EA 617-7001 AN 6 TO 3⁄8” NPT WITH 1⁄8” NPT PORT 1299 EA 617-7005 AN 8 TO 3⁄8” NPT WITH 1⁄8” NPT PORT 1199 EA 617-7008 1499 EA R | REMOTE J | IGNITION SWITCH STARTER SOLENOID - Panel mount switch - Eliminates solenoid failure on starter - Acc / off / on start positions - Rated at 20 amp 910-64043 $2899 EA 910-12209 $4499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 305

ELECTRICAL || Battery Components A | HD STARTER H | BATTERY SOLENOID DISCONNECT SWITCH - High capacity - A quick twist of the non-slip - Extra heavy duty metal case handle shuts off all electrical current - Continuous rating: 80-100A to the electric fuel pump, electric water pump, ignition, instruments, etc. - Maximum current, make: 150A 475-45900 545-74100 125 AMP $4499 EA 175 AMP EA 545-74101 300 AMP - HEAVY DUTY 5299 EA 545-74102 8499 $3999 EA J | BATTERY DISCONNECT B | REMOTE SWITCHES BATTERY TERMINALS - For safety and theft protection - Rated 180 amp continuous, - Allows for fast 1000 amp instantaneous convenient charging 910-64500 TWO-POST $2599 EA 910-64501 FOUR-POST - USE WITH ALTERNATOR 3099 EA 910-12531 BATTERY DISCONNECT SWITCH MOUNT 2099 EA 1 698-21504 REMOTE BATTERY TERMINAL $2599 PR K | BATTERY 2 910-12528 MOUNT - PLAIN 1799 EA DISCONNECT SWITCH MOUNT - BLACK 2299 EA 910-12529 MOUNT - STAINLESS STEEL 2799 EA - Shut off entire electrical system in 910-12530 an emergency with a quick ‘hit’ $1299 EA - 150 amp continuous rating C | BATTERY CABLE 1299 EA - 1000 amps intermittant - max voltage 48 volts $3999 EA BULKHEAD CONNECTOR 1 475-45749 PUSH PULL BATTERY DISCONNECT SWITCH 3999 EA - Allows you to run your battery cable 475-45750 BATTERY DISCONNECT SWITCH - 2 TERMINAL 4999 EA through a firewall the right way 475-45780 BATTERY DISCONNECT SWITCH - 4 TERMINAL 6099 EA - Utilizes heavy duty 3⁄8” x 16 brass terminals 5999 EA - Requires a 11⁄4” hole 2 475-45753 WEATHERPROOF BATTERY DISCONNECT SWITCH - 2 TERMINAL 8699 EA 475-45788 WEATHERPROOF BATTERY DISCONNECT SWITCH - 4 TERMINAL 11999 EA 910-64018 BLACK 475-45782 HIGH CAPACITY BATTERY DISCONNECT - 4 TERMINAL 910-64010 RED 475-45789 WEATHERPROOF HIGH CAPACITY BATTERY DISC. - 4 TERMINAL D | REMOTE BATTERY STUD - 200 amp rated - Works well to establish remote battery L | BRAIDED GROUNDING STRAP power in applications where multiple - 8”, 14” or 18” long - Tin coated copper accessories need battery power - 1” wide - 4-gauge - Red to identify battery power, black to establish system wide ground back to the battery 698-20308 8” $899 EA - Ideal for fiberglass bodies 14” 698-20314 18” 1199 EA 910-6288-RED RED $2499 EA 698-20318 1399 EA 2299 EA 910-6288-BLK BLACK E | TOP POST BATTERY M | COMPOUND ACTION DISCONNECT SWITCH ELECTRIC CABLE CUTTERS - 10” overall length 910-64503 $999 EA - Compound leverage increases cutting power while reducing cutting effort F | BATTERY CABLE - New quick and simple spring-free automatic latch design TERMINAL END (one hand release) provides safety and convenience - Cuts copper and aluminum electric cable up to 2AWG or 1⁄2” diameter 910-64504 728-11470 $1999 EA G | ECONOMY BATTERY $699 EA N | REMOTE MASTER DISCONNECT $1299 EA DISCONNECT KIT SWITCH - Can be hidden in the vehicle - Durable two-post plastic switch as an anti-theft deterrent by with removable red key switching the battery power flow 910-64502 from the battery to the fuse block - 12 volts - 2 positions 306 SpeedwayMotors.com 910-30204 MASTER DISCONNECT $9499 KIT SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

NEGATIVE NEGATIVE || Battery Components A | QUICKFLEX BATTERY POSITIVE CABLE POSITIVE - Welding cable has always been preferred by H | FLAG POST chassis builders to use for battery cables 2-GAUGE WIRE G | RIGHT, LEFT OR CENTER - Made with very fine copper wire and ELBOW TERMINAL insulated with synthetic rubber - Allows you to use 2 negative/positive - More flexible than battery cable, especially battery cables on one battery post - Will help give direction to your battery cable in cold temperatures, and is easier to - Set-up to be used with common 2-gauge - Made to be used with 2-gauge battery cable route into tight spaces battery cable wire - Crimp on or solder - 2ga Sold in 10’, 25’ lengths - Crimp on or solder - 100% copper cable for maximum conductivity 910-4002-SPECIFY CENTER $799 EA 910-4302-NEG NEGATIVE FLAG TERM $1199 EA 910-4102-SPECIFY RIGHT 999 EA BLACK CABLE 999 EA 910-20210 910-4302-POS POSITIVE FLAG TERM 1199 EA 910-4202-SPECIFY LEFT 999 PK 910-20225 10 FOOT $3599 EA 999 PK 25 FOOT 7999 EA 910-0621C 2GA SOLDER PELLETS 910-0621C 2GA SOLDER PELLETS RED CABLE 910-22210 10 FOOT $3699 EA 910-22225 25 FOOT 8099 EA J | BATTERY CABLE B | 18’ BATTERY CABLE ACCESSORIES - Two-gauge standard copper - Compression fitting 2 gauge wire with ends - Simple twist & screw connection - 2’ long black negative cable 1 698-21405 TOP POST BAT END - 2 PK $2299 EA 910-64505 SPEEDWAY $7799 EA 2 698-21409 TERMINAL END 3⁄8\" HOLE - 2 PK SPEEDWAY POST 1999 EA 910-5102-SPECIFY SPEEDWAY TERMINAL END 3⁄8\" HOLE 999 EA 910-5802 799 EA K | HAMMER C | LIGHTWEIGHT STYLE CRIMPER RACING CABLE KITS - 2AWG XP Flex, red power cable 910-64111 CRIMPER - 2AWG XP Flex, black ground cable - Heat shrink $2199 EA - 2AWG crimp terminals - Battery clamps - Wire clamps - Grommets - Self-tapping screws L | BATTERY CABLE ENDS 910-64507 SINGLE BATTERY - 16 FT. RED, 3 FT. BLACK $9999 KT - Tubular copper battery 910-64508 DUAL BATTERY - 22 FT. RED, 6 FT. BLACK 13999 KT cable ends with ring-style lugs 910-22516 2 GAUGE - 5⁄16\" HOLE $1599 BAG/10 2 GAUGE - 3⁄8\" HOLE BAG/10 910-22388 1/0 GAUGE - 3⁄8\" HOLE 1699 BAG/10 910-10388 1899 D | DELUXE M | BATTERY TERMINAL RACING PROTECTOR COVER BATTERY CABLE KIT - Battery terminal protector - Improve the appearance of your battery connections - 133 strand 1/0 pre-cut - Protect against corrosion and shorting cables for entire system - Battery cable provided is 12.5 ft in length 910-57242 BLACK $499 EA 475-48115 $23999 EA 910-57241 RED 499 EA N | SOLDER PELLETS E | 16V-12V STEP DOWN BOX - Solder Pellets Color Coded to Industry Specifications - Pellets Are Pre-Measured For Specific Gauge Size - Allows you to run 12 volt - Includes Flux Core accessories without burning them out 910-993 $16999 EA 910-0621C TWO GAUGE SOLDER PELLETS, 10 PCS $999 BAG/10 F | HYDRAULIC ONE GAUGE SOLDER PELLETS, 10 PCS BAG/10 CABLE CRIMPER 910-0622C 1/0 GAUGE SOLDER PELLETS, 10 PCS 1199 BAG/10 - Crimper capacity: 5 ton 910-0623C 2/0 GAUGE SOLDER PELLETS, 10 PCS 1799 BAG/10 910-0624C FLUX CLEANING FLUID 728-11980 $5999 EA 910-0627C 999 EA 899 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 307

ELECTRICAL || Batteries and Boxes A | 12 AND 16 VOLT F | PRO SERIES BATTERY CHARGER BATTERY CHARGER AND ENGINE STARTER - 12V and 16V AGM compatible - Battery Type: Standard AGM Gel Deep-Cycle - 25A max output - Input Voltage: 120V AC - Three charging modes - Input Current: 11A cont/50A int - LED indicators and ammeter to monitor status - Output Voltage: 6/12V - 6’ heavy duty cables w/ clamps - Output Current: 6/12V: 50A int, 6A; 125/250A int - Built in cooling fan for reliability - Dimensions: 11.88 × 16 × 24 in - Compact size, only 24 lbs. - Weight: 33.05 lb - Constant Current / Constant Voltage 910-1005 $36999 EA 690-DSR131 $21199 EA B | ALUMINUM G | FULLY AUTOMATIC $8499 EA BATTERY BOX BATTERY CHARGER AND ENGINE STARTER - Complies with NHRA Rule 8:1 - Fits most battery sizes - Battery Type: Standard AGM - 3 piece .040\" aluminum box design - Input Voltage: 120V AC - Hard mounts battery to the frame - Input Current: 2.2A - Heavy duty one-piece welded battery - Output Voltage: 12V - 3 sizes to choose from - Output Current: 6<>2A/10A cont, 50A int - Dimensions: 5.5 × 11.13 × 10.5 in 698-48100 131⁄2\" X 91⁄2\" X 10\" 9999 EA - Weight: 10.5 lb 111⁄4\" X 91⁄2\" X 83⁄4\" 10999 EA 690-SC1361 698-48200 91⁄2\" X 81⁄4\" X 73⁄4\" 698-48300 9199 EA C | SEALED $9599 EA H | CTEK BATTERY BOX BATTERY CHARGERS - Inside dimensions are 11” long, 81⁄2” wide and 9” tall - The compact .80 amp - Include hardware CTEK US800 charger is perfect to permanently needed for installation connect to your battery to keep it maintained - Available in Red or Black - The MXS 5.0 offers a unique eight step approach to battery care 458-700-COLOR - Features capabilities for improved charging in all weather STANDARD DELUXE 910-40206 MXS 5.0 BATTERY CHARGER $10097 EA MOUNT MOUNT 910-56159 US7002 BATTERY CHARGER 7\" X 33⁄4\" X 2\" 15707 EA D | BILLET BATTERY MOUNTS J | BATTERY BOX ADJUSTABLE 916-66600-PLN STANDARD MOUNT - 910-66411 AND 910-66412 - PLAIN $10199 EA 916-66600-POL STANDARD MOUNT - 910-66411 AND 910-66412 - POLISHED 9899 EA - 10.75\" x 9.75\" x 17.5\" - Group 24-31 $1499 EA 916-66601-PLN DELUXE MOUNT - 910-66411 AND 910-66412 - PLAIN 10699 EA - Locking lid - Includes adjustable divider for perfect fit B-PC680 - Effectively collects electrolytes $12899 EA and ventilates 14799 EA 910-00300 BATTERY BOX 16099 EA 21499 EA 916-66601-POL DELUXE MOUNT - 910-66411 AND 910-66412- POLISHED 10999 EA 1799 PR 916-66603 DELUXE MOUNT - 910-66415 BATTERY - PLAIN 6599 EA 916-66604 DELUXE MOUNT - 910-66413 BATTERY - PLAIN 6599 EA K | ODYSSEY BATTERIES - Non-spillable AGM design protects against shock and vibration E | ALUMINUM - Pure lead plates mean twice the A-PC545 BATTERY BOX overall power and three times the - Fits Braille 2015, 2015C, as well life with up to 400 cycles at 80% depth of discharge as Odyssey PC545 batteries - 12V with M6 female terminals - Use with accessory clamps to - Requires #131-100 for top post conversion mount on the chassis - 7.5” x 4” x 4.5” 1 131-545 150 CCA - 7\" X 3.37\" X 5.17\" - 13 LB. 2 131-680 170 CCA - 7.27\" X 3.11\" X 6.67\" - 16 LB. 950-52083 BATTERY BOX $7299 EA 220 CCA - 6.7\" X 3.9\" X 6.95\" - 13.2 LB. 131-625 330 CCA - 6.64\" X 7.05\" X 5.83\" - 23.8 LB. 910-32866-SPECIFY TUBE CLAMP 1699 EA 131-925 TOP POST 899 EA 131-100 636-1001 REPLACEMENT STRAP 308 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Batteries and Boxes WELD-ON BOLT-IN E | BATTERY BOXES $3399 EA A | BATTERIES 4699 EA - Holds 103⁄4” x 7” battery - Last two to three times - Lightweight steel longer than other batteries - Can be mounted in any direction 916-66006 WELD-ON 916-66007 BOLT-IN 910-66413 LENGTH WIDTH HEIGHT WIDTH 910-66411 STANDARD 910 CA 95⁄16” 613⁄16” 75⁄8” 33.1 LB. $19999 EA 910-66412 910-66415 STANDARD 1000 CA 10” 67⁄8” 713⁄16” 40.2 LB. 23999 EA F | 12 AND 16 VOLT DEEP CYCLE 870 CA 10” 67⁄8” 713⁄16” 43.5 LB. 27999 EA AGM BATTERIES 6 VOLT, 1000 CA 10” 31⁄2” 81⁄4” 18.5 LB. 19999 EA - Compact and easy to install - 12 volt deep cycle batteries - 16 volt requires step down 12 VOLT DEEP CYCLE / STARTING 913-D680 7.28” L X 6.67” W X 3.19” H - 14 LB. $14699 EA 19999 EA 913-D925 6.5” L X 6.93” W X 4.92” H - 26.63 LB. 20999 EA B | ODYSSEY PERFORMANCE 913-S925 7.0” L X 6.5” W X 5.0” H - 25.270 LB. $35999 EA SERIES BATTERY 16 VOLT STARTING $35999 EA - More overall power and longer 913-1000 36999 EA service life than conventional batteries 10.28” L X 6.75” W X 7.24” H - 30.8 LB. 16999 EA - Packed with pure lead power 16 VOLT DEEP CYCLE 913-D1000 10.24” L X 6.65” W X 7.2” H - 48.18 LB. 910-1005 16V CHARGER 910-993 16V TO 12V STEP-DOWN BOX CA CCA LENGTH WIDTH HEIGHT 131-31800 1188 802 13\" 6.81\" 9.44\" $37699 EA 131-34790 990 792 10.82\" 6.76\" 7.84\" 28499 EA 131-78790 131-65780 760 708 9.46\" 7.01\" 7.98\" 29099 EA 990 792 10.82\" 7\" 7.36\" 29699 EA G | 12 VOLT AGM S SERIES BATTERIES S545 S680 - 800 max amps. - 1000 max amps. - 240 CA - 320 CA - 25 min. reserve capacity - 28 min. reserve capacity - 586 and M6 hardware included - 586 and M6 hardware included C | BRAILLE NO-WEIGHT 913-545 6.97” L X 5.14” H X 3.38” W $13599 EA BATTERIES 913-680 7.13” L X 6.57” H X 3.03” W 15699 EA - Same design as braille carbon fiber H | MINI/MICRO AGM just not in a carbon fiber case $19999 EA SPRINT 22999 EA BATTERIES 194-2015 425 CCA - 6.8” X 3.4” X 6.1” - 15 LB. 194-3121 550 CCA - 6.6” X 5.2” X 6.8”- 21 LB. 8999 EA - Powerful in cranking AMPs 194-2018 MOUNT FOR 2015 AND 2015C BATTERY 9499 EA but features a lower AMP hour 194-3118 MOUNT FOR 3121 AND 3121C BATTERY rating due to their small size 194-1232 2 AMP HOUR CHARGER 9999 EA - Comes fully charged and ready to install 194-12310 10 AMP HOUR CHARGER 11999 EA - You must use Antigravity charger to avoid damaging the battery 960-801 8 CELL - 240 CCA - 1.75 LBS. - UP TO 750CC $17999 EA D | LITHIUM-ION 12 CELL - 360 CCA - 2.4 LBS. - FOR 1200CC BATTERIES 960-1201 16 CELL - 480 CCA - 3.2 LBS. - FOR 1600CC 21999 EA 960-1601 28999 EA - More power that is lighter, - stronger and more efficient J | BATTERY BOX - Braille's signature cranking power - Over 50% lighter - Aluminum construction - Choose correct size for your battery 194-500 BRAILLE G5 (4.45\" X 2.36\"X 3.39\") 1.4 LBS. 197 PCA $17999 EA - Includes mounting hardware to fasten to BRAILLE G5S (4.45\" X 2.57\" X 3.69\") 2.1 LBS. 346 PCA chassis tabs or sheet metal 194-505 BRAILLE BATTERY G20COMBO LITHIUM BATTERY 29999 EA 194-200 BRAILLE G20 (6.25\" X 2.98\" X 7.1\") 4.5 LBS. 57499 EA 960-12680 ODYSSEY PC 680 $5799 EA 194-201 BRAILLE BATTERY LITHIUM ION CHARGER 52499 EA 960-12545 ODYSSEY PC 545 5499 EA 194-1236 14999 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 309

ELECTRICAL || Switches and Wiring A | WIRING ACCESSORIES F | 8-SWITCH PANEL, NON-FUSED, ROLL BAR MOUNT - This roll bar mounted switch panel is to be used with 910-50001 wire harness - The switches that are included on this switch panel are: start, ignition, electric cooling fan, fuel pump 1, fuel pump 2, electric water pump, lights, accessory 1 FORK SPADES SIZE GAUGE PRICE 910-50202 8-SWITCH PANEL $19999 EA 910-55666 6-32 BLUE 12-10 $1199 100/BOX 910-55674 G | 6-SWITCH LIGHTED 6-32 YELLOW 12-10 1599 100/BOX PANEL, NON-FUSED WITH WIRING 2 BULLET STYLE GAUGE PRICE 100/BOX CONNECTORS MALE 16-14 100/BOX - This heavy-duty panel is 910-55670 FEMALE 16-14 $1099 pre-assembled with 910-55671 1099 vibration-resistant terminals COLOR GAUGE and 18 feet of TXL wire 3 BUTT BLUE 16-14 PRICE 100/BOX - The panel controls: start, ignition fuel pump, CONNECTORS YELLOW 12-10 100/BOX water pump/fan, two accessories 910-55667 RED 22-16 $799 100/BOX 910-55668 1299 910-50406 6-SWITCH LIGHTED PANEL $16999 EA 910-55669 899 H | 8-SWITCH FUSED CONNECTORS FULLY INSULATED MALE WORKS $1399 100/BOX PANEL WITH WIRING 4 910-55672 WITH 16-14 GAUGE WIRE 1399 100/BOX AND HARDWARE 5 910-55673 FULLY INSULATED FEMALE WORKS - Start - Fuel pump WITH 16-14 GAUGE WIRE - Ignition #1 and #2 - Electric fan - Water pump B | VINYL EYELET TERMINALS - Lights - One accessory 6 PART # SIZE GAUGE PRICE 910-50303 8-SWITCH FUSED PANEL $28999 EA 910-55516 5⁄16” HOLE 12-10 $2199 100/BOX 910-55538 J | 6-SWITCH FUSED 3⁄8” HOLE 12-10 2199 100/BOX PANEL WITH WIRING AND HARDWARE C | TERMINAL BLOCKS - Lighted rocker switches are color coded for quick reference 910-64005 4 TERMINALS $699 EA - All of the circuits are individually fused and are easily 8 TERMINALS accessible for quick testing and replacement 910-64006 10 TERMINALS 799 EA 910-64007 899 EA 910-50302 6-SWITCH FUSED PANEL $24999 EA D | HOT SHOT RELAY K | MEGA FUSE KIT $1800 EA - Allows you to turn over the engine - 175 amperage from the engine compartment 910-500689 for adjusting valves - Also overcomes starting problems L | DUAL WALL due to an overheated starter or worn HEAT SHRINK out electrical system by boosting amperage TUBING KIT to the starter solenoid every time the vehicle is started - 106 pieces in red and black 910-64033 HOT SHOT RELAY $4499 EA 728-45239 $2499 EA E | 70 AMP RELAY KIT M | BLACK SOLID STATE RELAY - Everything you need to power that big electric fan the right way - 4 Channels, 20 Amps each - Includes a 96\" 10-gauge load wire, - Multiple mounting options 72\" signal and feed wires, 60 amp - Activate with power or ground MAXI fuse, holder, terminals and detailed instruction sheet 910-51000 70 AMP RELAY WITH HARNESS $5310 EA 547-75643 $18495 EA 310 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Wiring SEARCH PICO G | SOLDER SEAL A | WEATHERPACK ELECTRICAL CONNECTORS TERMINAL KIT - Water-tight connection - 54 pieces - Each number consists of one - Assorted solder shrink male and one female component terminals and crimp and solder shrink butt connectors 910-12211 1 (2M-2F) $899 SET - Plastic box included 910-12212 2 999 SET 910-12213 3 910-55003 $7399 EA 1199 SET 910-12214 4 910-12215 6 1299 SET 1599 SET H | NYLON $3299 EA TERMINAL KIT - Nylon Sleeves Terminals - Includes 180 Pieces 910-0003WS J | RUBBER INSULATIONS B | WEATHERPACK TOOLS $2409 EA CLAMPS KIT 1 547-8193 DISASSEMBLE 10995 EA - 51 pieces 2 547-35051 MSD PRO CRIMP TOOL 5629 EA - Rubber construction 3 547-3509 WEATHER PAK JAWS FOR 547-35051 - Neoprene cushion 910-31318 $2699 EA K | GROMMET SEALS C | WEATHERPACK $3999 EA WIRE CRIMPING TOOL $699 EA - Seals-it grommet seals add the well-organized, professional appearance you want throughout your vehicle - Crimps 24-12 gauge open barrel terminals and weatherpack terminals 910-1003-SIZE SINGLE SEAL $2099 EA - Makes precision “F” crimps - 5 crimp nests 910-1012-SIZE DOUBLE SEAL 4799 EA 910-0663 L | 125 PIECE D | WEATHERPACK GROMMET KIT EXTRACTOR TOOLS - Pass fuel line, cables and wiring - Easily releases and extracts neatly though body panels without GM, Ford and Chrysler the risk of damage OEM terminals from their - 1⁄8” I.D. to 1” I.D. WeatherPak housings - Also releases lock tab on 940-04015 $1299 PK Packard 56 and Pak Con terminals 910-8193 M | 8” GROUND STRAP $599 EA E | WEATHERPACK KIT - 216 PIECE - 11 Gauge - 375 inch stud - 120 electrical terminals - Stranded and tin plated - 70 seals 910-8068 - 22 housings - 4 tools 910-12216 $15199 EA N | QUICK CONNECT F | 100 FT. ROLL OF TERMINALS 14 GAUGE PRIMARY WIRE - Contains one male and one - High temperature, multi-strand automotive wire female component - Choose Black, Blue, Orange, Purple, Red, Yellow, Green or White 910-12200 2 $499 SET 910-12201 3 549 SET 910-12202 4 599 SET 910-12203 6 699 SET 910-12100-COLOR $2399 ROLL 910-12204 9 749 SET 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 311

ELECTRICAL || Starters A | COMPACT $15399 KIT F | STARTER BY $18599 EA STARTER COMBO STEPHENVILLE ELECTRIC 2099 EA - Complete kit includes 1.4kw compact starter with a 3099 EA quick-disconnect wiring harness and heat shield - Compact 3HP - For 153-and 168-tooth S/B Chevy flywheels - New proprietary design to crank 910-67400 high compression and big cubicinch Chevy engines - Each starter is dyno tested 910-66300 STARTER 910-66310 REPLACEMENT SOLENOID 910-66311 REPLACEMENT DRIVE B | COMPACT STARTER G | SUPER-MINI $18299 EA STARTER 24799 EA - Fits 153 and 168 tooth flywheel - High torque high output - 2.6 hp $19899 EA gear reduction - Works with big cubic inch 26399 EA - 6061-T6 machined mounting plate high compression engines - Chevy V8 or 90° V6 S/B-B/B CHEVY - 153 OR 168 TOOTH FLYWHEEL $35295 EA - Will work on blocks with angle 910-6772-PLN BLACK FINISH 37195 EA - bolt starter flange by drilling and tapping one hole 910-6772-CHR CHROME FINISH 36595 EA S/B FORD 289-351W WITH AUTO TRANSMISSION 34395 EA 910-67440 NEW 1.4 KW MOTOR SBC $12199 EA 910-6785-PLN BLACK FINISH 37395 EA 910-66258 NEW HIGH-TORQUE 2.0 KW MOTOR SBC 21399 EA 910-6785-CHR CHROME FINISH $12999 EA 910-67430 NEW S/B FORD 1.4 KW AUTO TRANNY 22399 EA H | STARTERS 910-67433 NEW S/B FORD 1.4 KW MANUAL TRANNY 19999 EA $1899 EA NEW S/B FORD 1.4 KW MANUAL TRANNY - 3 hp 289-7002-BLK PINION GEAR 13616 EA - Gear reduction 4.4:1 improve CLUTCH ASSEMBLY torque for cranking 910-67435 SOLENOID 2299 EA - Mount can be clocked 910-67436 SHIM AND BOLT KIT 6599 EA 547-5095 SBC CHEVY V8 153 AND 168 TOOTH-STRAIGHT PATTERN 910-67437 3399 EA 547-5096 CHEVY LS BASED ENGINES 910-67434 1399 KIT 547-5090 FORD 289/302/351W 547-5098 MOPAR 273-440 C | LIGHTWEIGHT SPEEDWAY 547-50963 GM LS1-LS7, BLACK STARTERS - Can be rotated 360° HITACHI J | CHEVY MINI STARTER - 3” roller diameter $20699 EA - For 153 or 168 tooth flywheel - 153/168 tooth flywhee and straight bolt patterns 21999 EA - Adjustable mounting block - Works with motors up to - Works with most 10:1 compression oversized kickout oil pans - 1.0 kw motor 71⁄2” lb. S/B Chevy - 4.4:1 gear reductions ratio - Includes bolts and shims - Recommended for 10:1 compression ratio - Weighs 7.25 pounds 910-67409 SPEEDWAY - Dyno test results included 255-9100 910-67410 HITACHI K | QUICK D | ALUMINUM HEAT SHIELD $2099 EA DISCONNECT MINI FOR CHEVY MINI STARTER 2299 EA STARTER HARNESS - Prevent heat from exhaust from $2599 EA - Snaps on the solenoid and features cooking your starter and solenoid a weather pack connector to - Chevy or Ford ensure a corrosion free connection - Fits 910-67440 starter only - Does not fit Powermaster XS style starter 910-17481-RAW PLAIN 545-74245 910-17481-POL POLISHED E | UNIVERSAL STARTER HEAT SHIELD - Withstands 500ºF of direct heat / 2000º radiant 356-10402 7\" WIDE X 24\" LONG HEAT SHIELD 312 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Starters E | BILLET REMOTE STARTER BUTTON - Crank your motor over from the engine compartment A | CHEVY GEAR - Check compression, leakdown, set valves REDUCTION STARTER - Connects to starter motor or solenoid - 8.5 lb. high-torque gear reduction starter 475-45795 $6499 EA - Clears headers and oil pans where F | WIRE STRIPPER original equipment starters won’t AND CRIMPER - No heat soak problems - 4.4:1 reduction ratio and 200 ft. lb. of torque - Cut, strip and crimp 22-10 - S/B and B/B Chevy gauge wire and terminals and 7-8.5mmplug wires and terminals 910-67450 153-TOOTH FLEXPLATE - STRAIGHT BOLT PATTERN $21499 EA 910-67455 168-TOOTH FLEXPLATE - STRAIGHT BOLT PATTERN 1 910-86500 STRIPPER/CRIMPER $899 EA 910-67460 168-TOOTH FLEXPLATE - STAGGERED BOLT PATTERN 21999 EA 2 910-64113 MIZE STRIPPER 3899 EA 910-67483 FOR BRINN BELL HOUSING 22999 EA 22499 EA G | HI-TEMP HEAT SHRINK B | ONE WIRE RACING TUBING WIRE INSULATION ALTERNATOR - Use to insulate wires, connections, - Billet aluminum deep groove terminals, wire splicing & more reduction pulley - 80 amp, 14 volt 356-10836 9MM, 12MM, 18MM AND 24MM KIT - 2 FT. $2099 EA 3MM, 6MM, AND 9MM KIT - 4 FT. 1999 EA 910-68100 ALTERNATOR WITH PULLEY $10799 EA 356-10839 9MM ROLL - 4 FT. 1099 EA 3399 EA 356-10832 12MM ROLL - 4 FT. 1199 EA 545-64800 REPLACEMENT BILLET PULLEY FOR ONE-WIRE ALTERNATOR, OR 356-10833 18MM ROLL - 4 FT. 1499 EA UPGRADE STOCK ALTERNATOR TO THIS 5” LARGE DIAMETER PULLEY 356-10834 24MM ROLL - 4 FT. 1599 EA 356-10835 3MM ROLL - 4 FT. 899 EA 356-10837 6MM ROLL - 4 FT. 999 EA 356-10838 $14999 EA SHOWN C | MINI ALTERNATOR H | S/B FORD INSTALLED ALTERNATOR BRACKET - 14.7 Volts - One-wire unit for S/B Chevy using short pump only - Mounts Ford or Nippondenso alternator - Mounts on either side of engine, water pump mounted and driven on either side of engine - Includes alternator, alternator pulley, pulley crank kit belt, and - Fits with mechanical and electric water alternator mounting bracket pumps from most major manufacturers - Bracket and mounting hardware included 545-63810 S/B FORD ALTERNATOR BRACKET J | SNUG MOUNT 100 910-68120 50 AMP WITH SERPENTINE STYLE BELT $38999 EA AMP ALTERNATOR KIT 910-68121 50 AMP WITH V-BELT 38999 EA 910-68122 100 AMP WITH SERPENTINE STYLE BELT SHOWN 38999 EA - Mounts alternator on lower driver’s side 910-68125 100 AMP WITH V-BELT 38999 EA - Fits S/B Chevy short water pump 910-68128 MINI RACING ALTERNATOR ONLY 25999 EA - Includes alternator, brackets, bolts, spacers, pulley and belt - Voltage set point 14.9V 910-68123 REPLACEMENT SERPENTINE BELT 1299 EA - From crankshaft centerline to outer edge of alternator is 12.3” 910-68127 REPLACEMENT V-BELT 2899 EA 910-181 ALUMINUM V-BELT ALTERNATOR PULLEY 2999 EA 910-68124 $36999 EA D | ALTERNATOR KIT K | REVERSE - Kit includes alternator, mounting MOUNT STARTERS bracket, bolts, spacers and drive pulley - Does not include belt but we - For Bert, Brinn and recommend a 221⁄2\" V belt Quartermaster bellhousing - Weight 8 lbs - Single wire hook up 220-79060 BRINN $30199 EA - 40 amps POWERMASTER - Voltage output at race speed up to 15.2 volts 910-67483 QUARTERMASTER 22499 EA - Short water pump application (will fit V belt or serpentine pulleys) 910-114170 37372 EA 910-66301 $31999 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 313

FITTINGS || Plumbing STRAIGHT HOSE END 1 617-68106 A | REAL-STREET 617-68108 -6 AN $1499 EA C | VAPOR GUARD HOSE PTFE HOSE 617-68110 -8 AN 1699 EA END FITTINGS 30° HOSE END -10 AN 2099 EA - For carbureted or EFI applications 2 617-68006 - 5/16\" or 3/8\" - Black anodized finish -6 AN $2899 EA - Available in 3, 6, 10, 15, 20 foot lengths - Double-swivel design 617-68008 -8 AN 3399 EA - Reusable 617-68010 -10 AN 3899 EA CARBURATED 5/16\" $1197 UP - For P.T.F.E. hose only 45° HOSE END 425-760055ERL-LENGTH 3/8\" 1197 UP 3 617-68406 -6 AN $2699 EA 617-68408 -8 AN 3099 EA 425-760066ERL-LENGTH 5/16\" $1499 UP -10 AN 3499 EA EFI 3/8\" 1499 UP 617-68410 425-750055ERL-LENGTH -6 AN 425-750066ERL-LENGTH $3864 EA -8 AN 897 5/PACK 60° HOSE END -10 AN 965 5/PACK 4 617-68606 638 5/PACK 617-68608 -6 AN $2899 EA 707 5/PACK -8 AN 769 5/PACK 617-68610 -10 AN 3399 EA 837 5/PACK 3999 EA -6 AN 90° HOSE END -8 AN 5 617-68906 617-68908 -6 AN $2699 EA -8 AN 617-69910 -10 AN 3099 EA 3499 EA -6 AN 120° HOSE END -8 AN 6 617-68206 -10 AN 617-68208 $3299 EA 3899 EA D | VAPOR GUARD 150° HOSE END TOOLS AND CLAMPS 7 617-68506 $3299 EA 617-68508 3899 EA VAPOR GUARD CLAMP PLIERS AND CLAMPS 4299 EA 425-750000ERL CRIMP STYLE HOSE CLAMP PLIERS 617-68510 425-750005ERL SCREW TYPE 5⁄16\" HOSE CLAMP $3399 EA 425-750006ERL SCREW TYPE 3⁄8\" HOSE CLAMP 180° HOSE END 3899 EA 425-750009ERL 1 EAR TYPE 5⁄16\" HOSE CLAMP 8 617-68806 4299 EA 425-750010ERL 1 EAR TYPE 3⁄8\" HOSE CLAMP 617-68808 425-750011ERL 2 EAR TYPE 5⁄16\" HOSE CLAMP 425-750012ERL 2 EAR TYPE 3⁄8\" HOSE CLAMP 617-68810 B | 6000 PTFE LINED HOSES BLACK E | VAPOR GUARD $638 EA HOSE ENDS 638 EA - Clear cover or black cover - Works well for hot oil and - Aluminum construction 1155 EA - Black anodized finish 1155 EA power steering fluid - Reusable 1155 EA - -6 AN Working pressure: 1,500 psi STAINLESS 1155 EA VAPOR GUARD -6 AN HOSE ENDS Burst pressure: 6,000 psi 425-750156ERL STRAIGHT HOSE END -6 TO 5⁄16\" $707 EA - -8 AN Working pressure: 2,000 psi 425-750166ERL STRAIGHT HOSE END -6 TO 3⁄8\" 707 EA 638 EA Burst pressure: 8,000 psi 425-754156ERL 45° HOSE END -6 TO 5⁄16\" 769 EA - -10 AN Working pressure: 1,500 psi 425-754166ERL 45° HOSE END -6 TO 3⁄8\" 638 EA 769 EA Burst pressure: 6,000 psi 425-759156ERL 90° HOSE END -6 TO 5⁄16\" 965 EA 425-759166ERL 90° HOSE END -6 TO 3⁄8\" 965 EA -6 AN LINED HOSE Working pressure: 1500 psi - Burst pressure: 6000 PSI VAPOR GUARD NPT HOSE ENDS 897 EA 617-63006 425-781605ERL STRAIGHT 1⁄4\" NPT TO 5⁄16\" -6 AN, 3 FT. ROLL, STAINLESS $1999 EA 425-781606ERL STRAIGHT 1⁄4\" NPT TO 3⁄8\" 1024 EA 425-781652ERL STRAIGHT 1⁄8\" NPT TO 5⁄16\" 897 EA 617-66006 -6 AN, 6 FT. ROLL, STAINLESS 3999 EA 425-781656ERL STRAIGHT 3⁄8\" NPT TO 5⁄16\" 617-61506 -6 AN, 15 FT. ROLL, STAINLESS 9899 EA 425-781662ERL STRAIGHT 1⁄8\" NPT TO 3⁄8\" 1024 EA 425-781666ERL STRAIGHT 3⁄8\" NPT TO 3⁄8\" 617-62006 -6 AN, 20 FT. ROLL, STAINLESS 13199 EA $1024 EA 617-66026 -6 AN, 6 FT. ROLL, BLACK 6499 EA 425-782205ERL 90° 1⁄4\" NPT TO 5⁄16\" 1024 EA 425-782206ERL 90° 1⁄4\" NPT TO 3⁄8\" 617-61026 -6 AN, 10 FT. ROLL, BLACK 10699 EA 425-782252ERL 90° 1⁄8\" NPT TO 5⁄16\" $897 EA 425-782256ERL 90° 3⁄8\" NPT TO 5⁄16\" 897 EA -8 AN LINED HOSE Working pressure: 2000 psi - Burst pressure: 8000 PSI 425-782262ERL 90° 1⁄8\" NPT TO 3⁄8\" 617-66008 425-782266ERL 90° 3⁄8\" NPT TO 3⁄8\" -8 AN, 6 FT. ROLL, STAINLESS $5299 EA VAPOR GUARD 3 WAY TEE 425-782405ERL 5⁄16\" 3 WAY TEE 617-61508 -8 AN, 15 FT. ROLL, STAINLESS 13299 EA 425-782406ERL 3⁄8\" 3 WAY TEE VAPOR GUARD O-RING PORT 617-62008 -8 AN, 20 FT. ROLL, STAINLESS 17699 EA 425-785056ERL 9⁄16\" -18 O-RING PORT TO 5⁄16\" 617-63028 -8 AN, 3 FT. ROLL, BLACK 4599 EA 425-785066ERL 9⁄16\" -18 O-RING PORT TO 3⁄8\" 617-62028 -8 AN, 20 FT. ROLL, BLACK 30099 EA -10 AN LINED HOSE Working pressure: 1500 psi - Burst pressure: 6000 PSI 617-63010 -10 AN, 3 FT. ROLL, STAINLESS $2899 EA 617-61510 -10 AN, 15 FT. ROLL, STAINLESS 14299 EA 617-62010 -10 AN, 20 FT. ROLL, STAINLESS 18999 EA 617-63029 -10 AN, 3 FT. ROLL, BLACK 4999 EA 617-66029 -10 AN, 6 FT. ROLL, BLACK 9899 EA 617-61029 -10 AN,10 FT. ROLL, BLACK 16499 EA 617-61529 -10 AN, 15 FT. ROLL, BLACK 24699 EA 617-62029 -10 AN, 20 FT. ROLL, BLACK 32899 EA More options available at SpeedwayMotors.com 314 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing A | SPEED-FLEX LINE - Extruded PTFE - Standard of racing industry - For flexible brake & clutch hoses - Firmer brake feel - For instrument hoses D | BULK SUPERSTOCK HOSE - Available in sizes 10\" to 48\" - Pressure tested to 4000 PSI - Quality synthetic rubber hose SPEEDWAYMOTORS.COM - Maximum pressure rating of 250 PSI - Interior braided fabric sheath FOR FULL LINE OF EARL'S PRODUCTS - For OE applications - For professional racers -3 AN FEMALE TO 10MM/3/8 BANJO SPEED-FLEX LINE - Continuous service 425-63010213ERL - Suitable for fuel/oil/water 13\" $2598 EA - Sold in 3, 6, 10, 15, and 20 foot lengths 3579 EA 425-63010248ERL 48\" $3271 EA BLACK -3 AN FEMALE STRAIGHT AND 90° SPEED-FLEX LINE 4125 EA AN 4 425-63011710ERL 425-780004ERL-3 3 FEET BLUE 10\" AN 4 425-780004ERL-6 6 FEET $1497 EA 425-790004ERL-3 3 FEET 425-63011728ERL 28\" 425-780004ERL-10 10 FEET 2994 EA 425-780004ERL-15 15 FEET 4990 EA 425-790004ERL-6 6 FEET $1099 EA MANY MORE SIZES AVAILABLE AT SPEEDWAYMOTORS.COM 7485 EA 425-790004ERL-10 10 FEET 2199 EA 425-780004ERL-20 20 FEET 9980 EA 425-790004ERL-15 15 FEET 3599 EA B | BLACK SUPER AN 6 6099 EA STOCK HOSE ENDS 425-780006ERL-3 3 FEET $1197 EA 425-790004ERL-20 20 FEET 7199 EA 2394 EA AN 6 - A direct replacement for the 425-780006ERL-6 6 FEET 3990 EA 425-790006ERL-3 3 FEET $1199 EA brass push lock type 425-780006ERL-10 10 FEET 5985 EA 2399 EA - Machined from aluminum alloy 425-780006ERL-15 15 FEET 7980 EA 425-790006ERL-6 6 FEET 3999 EA 425-790006ERL-10 10 FEET 5999 EA STRAIGHT $725 EA 120º 425-780006ERL-20 20 FEET $1497 EA 425-790006ERL-15 15 FEET 7999 EA 425-AT700145ERL AN 4 425-AT712045ERL AN 4 $2518 EA AN 8 2994 EA 725 EA 425-780008ERL-3 3 FEET 4990 EA 425-790006ERL-20 20 FEET $1497 EA 425-AT700167ERL AN 6 770 EA 425-AT712067ERL AN 6 2576 EA 7485 EA AN 8 2994 EA 425-AT700109ERL AN 8 1026 EA 425-AT712009ERL AN 8 2831 EA 425-780008ERL-6 6 FEET 9980 EA 425-790008ERL-3 3 FEET 4999 EA 425-AT700111ERL AN 10 1542 EA 425-AT712011ERL AN 10 2962 EA 425-780008ERL-10 10 FEET 7485 EA 425-AT700113ERL AN 12 425-AT712013ERL AN 12 3217 EA 425-780008ERL-15 15 FEET $1797 EA 425-790008ERL-6 6 FEET 3594 EA 425-790008ERL-10 10 FEET $1797 EA 45º 180º 425-780008ERL-20 20 FEET 5990 EA 3594 EA 425-AT704645ERL AN 4 $2355 EA 425-AT718045ERL AN 4 $2562 EA AN 10 8985 EA 425-790008ERL-15 15 FEET 5999 EA 425-AT704667ERL AN 6 2316 EA 425-AT718067ERL AN 6 2704 EA 425-780010ERL-3 3 FEET AN 10 8985 EA 425-AT704609ERL AN 8 2704 EA 425-AT718009ERL AN 8 2831 EA 11980 EA 425-790010ERL-3 3 FEET 425-AT704611ERL AN 10 3089 EA 425-AT718011ERL AN 10 2962 EA 425-780010ERL-6 6 FEET 11980 EA 425-AT704613ERL AN 12 3607 EA 425-AT718013ERL AN 12 3217 EA 425-780010ERL-10 10 FEET $2097 EA 425-790010ERL-6 6 FEET 425-780010ERL-15 15 FEET 4194 EA 425-790010ERL-10 10 FEET $2097 EA 90º MALE PIPE TO HOSE 6999 EA 425-790010ERL-15 15 FEET 4194 EA 425-AT709145ERL AN 4 $2316 EA 425-AT720142ERL 1⁄8” - AN 4 $995 EA 425-780010ERL-20 20 FEET 6990 EA 425-AT709167ERL AN 6 2316 EA 425-AT720186ERL 3⁄8” - AN 8 1411 EA AN 12 10485 EA 425-790010ERL-20 20 FEET 425-AT709109ERL AN 8 2704 EA 425-AT720111ERL 1⁄2” - AN 10 1747 EA 425-780012ERL-3 3 FEET 13980 EA AN 12 10485 EA 425-AT709111ERL AN 10 3089 EA 425-AT720113ERL 3⁄4” - AN 12 2273 EA 425-790012ERL-3 3 FEET 13980 EA 425-AT709113ERL AN 12 3217 EA 425-780012ERL-6 6 FEET 425-780012ERL-10 10 FEET 425-790012ERL-6 6 FEET 425-780012ERL-15 15 FEET 425-790012ERL-10 10 FEET 425-780012ERL-20 20 FEET 425-790012ERL-15 15 FEET 425-790012ERL-20 20 FEET FITTING THREAD SIZE CHART AN HOLE SIZE SAE 37 DEGREE WRENCH SAE 45 DEGREE WRENCH SAE PIPE TUBE O.D. AN 3 THREAD 1⁄2” THREAD 1⁄2” INVERTED FLARE THREAD SIZE SIZE AN 4 3⁄8” - 24 9⁄16” 3⁄8” - 24 9⁄16” 3⁄8” - 24 1⁄8” - 27 3⁄16” AN 6 7⁄16” - 20 11⁄16” 7⁄16” - 20 3⁄4” 7⁄16” - 24 1⁄4” - 18 1⁄4” AN 8 9⁄16” - 18 7⁄8” 5⁄8” - 18 7⁄8” 5⁄8” - 20 3⁄8” - 18 3⁄8” AN 10 3⁄4” - 16 1” 3⁄4” - 16 1” 3⁄4” - 18 1⁄2” - 14 1⁄2” AN 12 7⁄8” - 14 11⁄4” 7⁄8” - 14 11⁄4” 7⁄8” - 18 ---- 5⁄8” AN 16 11⁄16” - 12 13⁄8” 11⁄16” - 14 ---- 11⁄16” - 16 3⁄4” - 14 3⁄4” 15⁄16” - 12 ---- ---- ---- 1” E | AN FITTING CAPS AND PLUGS AN FITTING CAPS 4 PACK AN FITTING PLUGS 4 PACK 545-23799 AN 3 $599 SET 545-23798 AN 3 - Used when sealing 599 SET 545-23800 AN 4 $799 SET 599 SET 545-23802 AN 6 race engines 545-23801 AN 4 599 SET 545-23804 AN 8 599 SET C | PLASTIC AN CAP 599 SET 545-23806 AN 10 599 SET AND PLUG KIT - Each cap and plug is reusable 545-23803 AN 6 699 SET 545-23808 AN 12 599 SET - Use on oil, fuel, or coolant lines 545-23805 AN 8 699 SET 545-23810 AN 16 599 SET - Includes six each cap and plug - Four caps or plugs per package 545-23807 AN 10 699 SET for AN 3, AN 4, AN 6, AN 8, - Economy pack includes four 545-23809 AN 12 2999 KIT 910-09401 ECON PACK 699 SET AN 10 and AN 12 each of AN 4, AN 6, AN 8, 545-23811 AN 16 - AN 10, and AN 12 910-09400 ECON PACK 2999 KIT 910-09450 $1699 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 315

FITTINGS || Plumbing A | FULL FLOW SWIVEL HOSE FITTINGS STRAIGHT BLUE/REDPRICE BLACK PRICE 45° BLUE/RED PRICE BLACK PRICE 90° BLUE/RED PRICE BLACK PRICE AN 6 620-1002 $799 EA 620-10021 $899 EA AN 6 620-1009 $1399 EA 620-10091 $1699 EA AN 6 620-1016 $1599 EA 620-10161 $1799 EA AN 8 AN 8 AN 8 620-1003 899 EA 620-10031 999 EA AN 10 620-1010 1599 EA 620-10101 1799 EA AN 10 620-1017 1799 EA 620-10171 1899 EA AN 12 620-1011 1899 EA 620-10111 1999 EA AN 12 620-1018 1899 EA 620-10181 2099 EA AN 10 620-1004 999 EA 620-10041 1199 EA AN 20 620-1012 2199 EA 620-10121 2399 EA AN 20 620-1019 2199 EA 620-10191 2499 EA 617-1014 7599 EA 617-1021 7499 EA AN 12 620-1005 1199 EA 620-10051 1399 EA AN 20 617-1007 4899 EA D | NICKEL PLATED FULL FLOW SWIVEL HOSE FITTINGS B | TFE STAINLESS WIRE BRAIDED HIGH PRESSURE HOSE - Easy assembly and better seal than push-on style fittings - High quality aluminum - Used for many high pressure applications, such as brakes with a brilliant nickel finish and power steering - Available in straight, 45 or 90 degree - Provides maximum performance by combining the low friction - Corrosion resistant and reusable properties of the Teflon® inner liner with the antiburst strength - Must use with Speedway hose listed below from a stainless steel overbraiding - Stainless overbraid won’t corrode or discolor - Must be used with steel fittings found below STRAIGHT 620-10020 AN 6 $999 EA 1699 EA PART # AN SIZE HOSE I.D. LENGTH PRICE 620-10030 AN 8 1899 EA 617-3069-LENGTH AN 3 1⁄8” 620-10040 AN 10 2599 EA 3', 6', 10', 15', 20' $1799 UP 620-10050 AN 12 UP $2599 EA 617-3070-LENGTH AN 4 3⁄16” 3', 6', 10', 15', 20' 1799 2699 EA 617-3259-LENGTH 2999 EA AN 6 11⁄32” 3', 6', 10', 15', 20' 2399 UP 45º AN 6 3499 EA 617-3249 1299 EA 620-10090 AN 8 617-3250 AN 3 1⁄8” 3 FT. 2499 EA 620-10100 AN 10 $2399 EA 617-3251 AN 3 1⁄8” 6 FT. 3999 EA 620-10110 AN 12 2899 EA 617-3252 AN 3 1⁄8” 10 FT. 6999 EA 620-10120 3499 EA 617-3253 AN 3 1⁄8” 15 FT. 7499 EA AN 6 3499 EA AN 3 1⁄8” 20 FT. 1599 EA 90º AN 8 617-3254 2499 EA 620-10160 AN 10 617-3255 AN 4 3⁄16” 3 FT. 4999 EA 620-10170 AN 12 617-3256 AN 4 3⁄16” 6 FT. 5999 EA 620-10180 617-3257 AN 4 3⁄16” 10 FT. 8999 EA 620-10190 617-3258 AN 4 3⁄16” 15 FT. AN 4 3⁄16” 20 FT. 617-3260 AN 6 11⁄32” 3 FT. 2499 EA 617-3261 AN 6 11⁄32” 6 FT. 3999 EA 617-3262 AN 6 11⁄32” 10 FT. 6699 EA C | HOSE ENDS E | STAINLESS FOR TFE HOSE STEEL BRAIDED LINE - High alloy steel for rugged brake systems - Use in conjunction with full flow fittings shown above - Can handle up to 3000 psi - Not recommended for high temperature applications - Must be used with TFE high pressure hose directly above AN 6 3 FEET $1399 EA AN 8 3 FEET $2099 EA 617-2013 AN 3 - STRAIGHT $799 EA 620-306-3 6 FEET 620-308-3 6 FEET 3899 EA 617-2014 AN 4 - STRAIGHT 699 EA 10 FEET 2699 EA 10 FEET 5499 EA 617-2040 AN 6 - STRAIGHT 799 EA 620-306-6 15 FEET 4599 EA 620-308-6 15 FEET 8599 EA 620-306-10 20 FEET 6799 EA 620-308-10 20 FEET 617-2015 AN 3 - 45° 1299 EA 620-306-15 9099 EA 620-308-15 10999 EA 617-2016 AN 4 - 45° 1099 EA 620-306-20 620-308-20 617-2041 AN 6 - 45° 1599 EA $2299 EA AN 10 3 FEET $2299 EA AN 12 3 FEET 4399 EA 617-2017 AN 3 - 90° 1299 EA 620-310-3 6 FEET 620-312-3 6 FEET 7199 EA 617-2018 AN 4 - 90° 1199 EA 10 FEET 3899 EA 10 FEET 617-2042 AN 6 - 90° 2099 EA 620-310-6 15 FEET 7599 EA 620-312-6 15 FEET 11999 EA 620-310-10 20 FEET 9299 EA 620-312-10 20 FEET 13099 EA 620-310-15 12599 EA 620-312-15 620-310-20 620-312-20 316 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing A | FULL FLOW HOSE ENDS - Use with Aeroquip hose listed below STRAIGHT BLUE/REDPRICE BLACK PRICE 45° BLUE/RED PRICE BLACK PRICE 90° BLUE/RED PRICE BLACK PRICE AN 4 617-1001 $999 EA N/A N/A AN 4 617-1008 $2099 EA N/A N/A AN 4 N/A N/A N/A N/A AN 6 AN 6 AN 6 617-1002 799 EA 617-10021 899 EA AN 8 617-1009 2299 EA 617-10091 2299 EA AN 8 617-1016 1799 EA 617-10161 1799 EA AN 10 617-1010 2599 EA 617-10101 2599 EA AN 10 617-1017 2099 EA 617-10171 2099 EA AN 8 617-1003 999 EA 617-10031 899 EA AN 12 617-1011 3099 EA 617-10111 3099 EA AN 12 617-1018 2599 EA 617-10181 2399 EA AN 16 617-1012 3599 EA 617-10121 3499 EA AN 16 617-1019 2999 EA 617-10191 2999 EA AN 10 617-1004 1099 EA 617-10041 1099 EA 617-1013 4599 EA 617-10131 4599 EA 617-1020 4599 EA 617-10201 4599 EA AN 12 617-1005 1499 EA 617-10051 1499 EA AN 16 617-1006 2499 EA 617-10061 2499 EA 120° BLUE/RED PRICE BLACK PRICE B | STAINLESS STEEL AN 6 617-1022 $3099 EA 617-10221 $2999 EA BRAIDED WIRE HOSE AN 8 AN 10 617-1023 3399 EA 617-10231 3099 EA - One of the finest fluid transfer AN 12 617-1024 3899 EA 617-10241 3099 EA hoses available today AN 16 617-1025 3899 EA 617-10251 3299 EA Hoses provide maximum flexibility N/A 4499 EA 617-10301 4999 EA and complete reliability - 750 psi operating pressure - -45° to 300° F temperature rating - Use this with full flow hose ends listed on this page - No returns on cut to length hoses - Available in lengths of 3, 6, 10, 15, 20 180° BLUE/RED PRICE BLACK PRICE PART # AN SIZE HOSE I.D. PRICE AN 6 617-1026 $2999 EA 617-10261 $2999 EA 617-304 AN 4 7⁄32” $999 PER/FT AN 6 11⁄32” AN 8 617-1027 3599 EA 617-10271 3299 EA 617-306 AN 8 7⁄16” 999 PER/FT AN 10 617-1028 3599 EA 617-10281 3399 EA 617-308 AN 10 9⁄16” 1099 PER/FT AN 12 617-1029 3899 EA 617-10291 4299 EA 617-310 AN 12 11⁄16” 1099 PER/FT AN 16 617-1031 5399 EA 617-10311 5499 EA 617-312 AN 16 7⁄8” 1099 PER/FT 617-316 AN 20 11⁄8” 1699 PER/FT 617-320 AN 24 13⁄4” 2099 PER/FT 617-324 AN 32 113⁄16” 6999 PER/FT 617-332 6119 PER/FT 620-5060-LENGTH AN 6 $2099 PER/FT 620-5080-LENGTH AN 8 2399 PER/FT 2999 PER/FT C | PREMIUM 620-510-LENGTH AN 10 3297 PER/FT BLACK 620-512-LENGTH AN 12 3899 PER/FT 620-516-LENGTH AN 16 E | POWER STEERING SYNTHETIC HOSE HOSE ENDS AND - Rubber core, flexible braided nylon cover STEERING ADAPTERS - Resistant to oil, fuels, and coolants - Features a 500 psi working pressure and an operating range of -40°F to +300°F HOSE ENDS - Designed to be used with both crimp style and full flow fittings 425-130106ERL -6 AN STRAIGHT $1176 EA 425-134606ERL -6 AN 45° 2498 EA 425-139106ERL -6 AN 90° 2441 EA STEERING ADAPTERS 425-961946ERL -6 AN MALE TO 1⁄2\"-20\" MALE $1366 EA 425-961947ERL -6 AN MALE TO 5⁄8\"-18\" MALE 1366 EA D | POWER STEERING HOSE 425-961950ERL -6 AN MALE TO 11⁄16\"-18\" IFM 1366 EA - Meets tough power steering requirements - Triple steel and fabric reinforced 425-961955ERL -6 AN MALE T0 16MMX1.5 MALE 1366 EA - Also suitable for hydraulics and air lines - 2,250 PSI operating pressure 425-961956ERL -6 AN MALE T0 18MMX1.5 MALE 1366 EA - Sold in 3, 6, 10, 15 and 20 foot lengths 425-961961ERL -6 AN MALE T0 POWER STEERING 3416 EA PUMP PRESSURE LINE 425-991950ERL -6 AN MALE TO 11⁄16\"-18\" IFM 843 EA BLUE 3 FEET $2097 EA 425-991946ERL -6 AN MALE TO 1⁄2\"-20\" 877 EA 425-130006ERL-3 6 FEET 425-991947ERL -6 AN MALE TO 5⁄8\"-18\" 877 EA 10 FEET 4194 EA 425-991954ERL -6 AN MALE T0 14MMX1.5 1071 EA 425-130006ERL-6 20 FEET 6999 EA 425-991955ERL -6 AN MALE T0 16MMX1.5 1071 EA 425-130006ERL-10 13980 EA 425-991956ERL -6 AN MALE T0 18MMX1.5 1071 EA 425-130006ERL-20 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 317

FITTINGS || Plumbing A | SOCKETLESS PUSH-ON HOSE ENDS FOR 37° FITTINGS STRAIGHT BLUE/REDPRICE BLACK PRICE 45° BLUE/RED PRICE BLACK PRICE 90° BLUE/RED PRICE BLACK PRICE AN 6 620-2002 $799 EA 620-20021 $799 EA AN 6 620-2009 $1499 EA 620-20091 $1599 EA AN 6 620-2016 $1399 EA 620-20161 $1599 EA AN 8 AN 8 620-2003 899 EA 620-20031 899 EA AN 8 620-2010 1899 EA 620-20101 1899 EA AN 10 620-2017 1899 EA 620-20171 1899 EA AN 10 620-2011 1999 EA 620-20111 2199 EA AN 12 620-2018 2099 EA 620-20181 2299 EA AN 10 620-2004 899 EA 620-20041 999 EA AN 12 620-2012 2099 EA 620-20121 2399 EA 620-2019 2099 EA 620-20191 2499 EA AN 12 620-2005 1099 EA 620-20051 1299 EA B | BLACK PUSH-ON HOSE D | BLUE PUSH-ON HOSE - 250 psi / 200 degree - 250 psi / 200 degree AN 6 $1499 EA AN 8 $1599 EA AN 6 $1399 EA AN 8 $1199 EA 620-106-3 3 FEET 620-108-3 3 FEET 2999 EA 620-206-3 3 FEET 620-208-3 3 FEET 2099 EA 2599 EA 4899 EA 2399 EA 3499 EA 620-106-6 6 FEET 4299 EA 620-108-6 6 FEE 5699 EA 620-206-6 6 FEET 3699 EA 620-208-6 6 FEET 5199 EA 620-106-10 10 FEET 5199 EA 620-108-10 10 FEET 7399 EA 620-206-10 10 FEET 5199 EA 620-208-10 10 FEET 7199 EA 620-106-15 15 FEET 7199 EA 620-108-15 15 FEET 620-206-15 15 FEET 7199 EA 620-208-15 15 FEET 620-106-20 20 FEET 620-108-20 20 FEET $2099 EA 620-206-20 20 FEET 620-208-20 20 FEET $2099 EA 4499 EA 3899 EA AN 10 $1799 EA AN 12 7099 EA AN 10 $1799 EA AN 12 5999 EA 620-110-3 3 FEET 620-112-3 3 FEET 8799 EA 620-210-3 3 FEET 620-212-3 3 FEET 8799 EA 3199 EA 2699 EA 620-110-6 6 FEET 4399 EA 620-112-6 6 FEET 11499 EA 620-210-6 6 FEET 4399 EA 620-212-6 6 FEET 11499 EA 620-110-10 10 FEET 6799 EA 620-112-10 10 FEET 620-210-10 10 FEET 6599 EA 620-212-10 10 FEET 620-110-15 15 FEET 8599 EA 620-112-15 15 FEET 620-210-15 15 FEET 8299 EA 620-212-15 15 FEET 620-110-20 20 FEET 620-112-20 20 FEET 620-210-20 20 FEET 620-212-20 20 FEET Note: This hose works ONLY with these fittings! C | FC300 HOSE $2399 UP E | NICKEL AND FITTINGS 899 EA PLATED PUSH-ON - Aeroquip FC 300 spec hose to be 1599 EA HOSE ENDS used as the fuel or power steering line 1799 EA - Choose AN 6, AN 8 or AN 10 and fittings required - High quality aluminum fittings 2999 FT with a brilliant nickel finish 106-FC3000 AN 6 HOSE IN 3, 6, 10, 15, 20 FOOT 999 EA - Available in straight, 45 or 90 degree 106-1302 AN 6 - STRAIGHT END - Corrosion resistant and reusable 106-1386 AN 6 - 45° END 1499 EA 106-1389 AN 6 - 90° END 1399 EA STRAIGHT AN 6 $999 EA 106-FC308 AN 8 HOSE IN 3, 6, 10, 15, 20 FOOT 620-1512 AN 8 1299 EA 106-1305 AN 8 - STRAIGHT END 3299 EA AN 10 1799 EA 106-1384 AN 8 - 45° END 1399 EA 620-1513 AN 12 1999 EA 106-1387 AN 8 - 90° END 3399 EA 620-1514 106-FC301 AN 10 HOSE IN 3, 6, 10 FOOT 2199 EA 620-1515 $2399 EA 106-1306 AN 10 STRAIGHT END 2599 EA 106-1388 AN 10 - 45º END 3099 EA 106-1390 AN 10 - 90º END 3299 EA NPT THREAD SIZE CHART 45º AN 6 $2399 EA 620-1522 AN 8 2599 EA PIPE THREADTHREADS THEORETICAL I.D. THEORETICAL O.D.CLOSEST AN AN 10 2699 EA SIZE PER INCH OF FITTING OF FITTING FITTING SIZE 620-1523 AN 12 3299 EA 620-1524 1⁄8” 27 1⁄8” 3⁄8” 4 620-1525 1⁄4” 18 1⁄4” 1⁄2” 6 90º 620-1532 3⁄8” 18 3⁄8” 5⁄8” 8 AN 6 620-1533 AN 8 1⁄2” 14 1⁄2” 3⁄4” 10 620-1534 AN 10 620-1535 AN 12 3⁄4” 14 3⁄4” 1” 12 1” 111⁄2” 1” 16 318 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing A | SOCKETLESS RE-USABLE FITTINGS C | AN LINE AND A PART # AN A H PRICE FITTING TEMPLATE 106-1231 4 1.5” .19” $599 EA - All in one quick reference tool - Great for completing plumbing jobs H 106-1222 6 1.7” .30” 699 EA - Corrosion resistant stainless steel construction 106-1233 8 2.0” .39” 799 EA 106-1234 10 2.6” .48” 899 EA 910-82635 TEMPLATE $1199 EA A B PART # AN A B PRICE 106-1438 4 1.56” .33” $1899 EA 106-1439 Push-on 45° steel 106-1440 6 1.8” .4” 1699 EA hose ends for use 8 2.3” .6” 1699 EA with AN fittings D | PUSH LOCK A PART # AN A B PRICE HOSE TOOL 106-1241 4 1.45” $1199 EA - Traveling carriage contains sealed bearings B Push-on 90° steel 106-1242 6 1.7” .4” 1199 EA and rolls on a track hose ends for use - New drive screw and larger nut for with AN fittings 106-1243 8 2.1” 1.1” 1199 EA improved performance and stability - Thrust and ball bearings on each end of A PART # AN NPT A PRICE the drive screw for smoother operation 106-1207 - Aluminum and stainless steel Push-on hose ends to 6 1⁄4” 1.8” $499 EA construction, making it 40% lighter taper pipe brass 106-1202 - Works with 1/4\"-1\" Hose 106-1206 6 3⁄8” 1.8” 599 EA 469-4092 106-1203 106-1204 8 3⁄8” 1.9” 699 EA 106-1205 8 1⁄2” 2.2” 699 EA $29999 EA 10 1⁄2” 2.7” 899 EA 12 3⁄4” 2.7” 1099 EA 37° A PART # AN A B PRICE 106-2071-4 4 .7” .9” Tight fit 90° male/ B 106-2071-6 6 .9” 1.1” $699 EA female steel 799 EA A E | SPECIAL APPLICATION HOSE 106-2071-8 8 1.1” 1.5” 899 EA Full flow 90° male/ BLACK - Textile braid female steel PART # AN A B PRICE AN 4 - No hose clamp necessary 106-500454-10 10 617-004-3 3 FEET $1499 EA - Low pressure, socketless B 106-500454-12 12 1.2” 1.8” $2999 EA 3499 EA - Available in Black or Blue 1.8” 2.5” 3199 EA 617-004-6 6 FEET 4999 EA 617-004-10 10 FEET 7499 EA BLUE $3499 EA B | 37° PUSH-ON HOSE - SOCKETLESS 617-004-15 15 FEET 9999 EA AN 4 4999 EA REUSABLE FITTINGS 617-504-6 6 FEET 9999 EA 617-004-20 20 FEET $1899 EA - Fittings are nickel plated to a luster finish for the ultimate AN 6 4299 EA 617-504-10 10 FEET $1799 EA in professional appearance 617-006-3 3 FEET 6199 EA 4199 EA 9199 EA 617-504-20 20 FEET 5999 EA SOCKETLESS FITTING - STRAIGHT $799 EA 617-006-6 6 FEET AN 6 8999 EA 617-1512 AN 6 617-006-10 10 FEET 12299 EA 617-506-3 3 FEET 1299 EA 617-006-15 15 FEET 11999 EA 617-1513 AN 8 1599 EA $2099 EA 617-506-6 6 FEET 617-1514 AN 10 2199 EA 617-006-20 20 FEET 4899 EA 617-506-10 10 FEET $2099 EA 617-1515 AN 12 AN 8 6999 EA 617-506-15 15 FEET 4899 EA 617-008-3 3 FEET 6999 EA SOCKETLESS FITTING - 45° ELBOW $2399 EA 10499 EA 617-506-20 20 FEET 617-1522 AN 6 617-008-6 6 FEET 13999 EA AN 8 10499 EA 2599 EA 617-008-10 10 FEET 617-508-3 3 FEET 13999 EA 617-1523 AN 8 2999 EA 617-008-15 15 FEET $2399 EA 617-1524 AN 10 2999 EA 5599 EA 617-508-6 6 FEET $2399 EA 617-1525 AN 12 617-008-20 20 FEET 7999 EA 617-508-10 10 FEET 4799 EA AN 10 617-508-15 15 FEET 7999 EA SOCKETLESS FITTING - 90° ELBOW $2299 EA 617-010-3 3 FEET 11999 EA 617-1532 AN 6 15999 EA 617-508-20 20 FEET 10799 EA 2399 EA 617-010-6 6 FEET AN 10 15999 EA 617-1533 AN 8 2799 EA 617-010-10 10 FEET $2699 EA 617-510-3 3 FEET 617-1534 AN 10 3099 EA 617-010-15 15 FEET 6299 EA $2999 EA 617-1535 AN 12 8999 EA 617-510-6 6 FEET 8099 EA 617-010-20 20 FEET 617-510-10 10 FEET AN 12 13499 EA 617-510-15 15 FEET 617-012-3 3 FEET 17999 EA 617-510-20 20 FEET 617-012-6 6 FEET AN 12 617-012-10 10 FEET 617-512-3 3 FEET 617-012-15 15 FEET 617-012-20 20 FEET 617-512-10 10 FEET 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 319

FITTINGS || Plumbing A | ALUMINUM FLARE BULKHEADS AND TEE ADAPTERS FLARE REDUCERS BLACK BLUE 617-61751 90° BLUE BLACK 617-61761 $899 EA AN 3 617-6123 617-61231 $1199 EA AN 3 - AN 4 617-6175 599 EA AN 4 - AN 6 617-6176 617-61771 AN 4 617-6124 617-61241 999 EA 617-61781 1199 EA AN 6 617-6125 AN 6 - AN 8 617-6177 617-61801 1299 EA AN 8 617-6126 617-61251 1099 EA AN 6 - AN 10 617-6178 1799 EA AN 10 617-6127 AN 6 - AN 12 617-6180 617-61791 1499 EA AN 12 617-6128 617-61261 1499 EA 617-61811 1799 EA AN 8 - AN 10 617-6179 1799 EA AN 16 N/A 617-61271 1899 EA AN 8 - AN 12 617-6181 617-61821 2399 EA 45° BLUE 617-61831 2399 EA AN 4 324-983704 617-61281 2099 EA AN 10 - AN 12 617-6182 617-61841 AN 12 - AN 16 N/A $1199 EA AN 6 324-983706 617-61291 5099 EA AN 12 - AN 16 617-6184 1199 EA AN 8 324-983708 BLACK 1199 EA 324-9837041 $699 EA AN 10 324-983710 $899 EA TEE BLUE 324-9837061 899 EA MALE O-RING TO AN 1099 EA AN 3 617-6130 106-2953 AN 10 - AN 10 1199 EA 324-9837081 1399 EA 2290 EA AN 4 617-6131 106-2954 AN 10 - AN 12 AN 6 617-6132 324-9837101 1699 EA 106-2955 AN 12 - AN 12 $1099 EA AN 8 N/A BLACK 1099 EA AN 10 N/A 617-61301 $1799 EA 1499 EA 90° FLARE 1799 EA AN 12 617-6135 617-61311 1299 EA 324-982104 AN 4 2099 EA TEE ON RUN BLUE AN 6 2999 EA AN 3 324-980403 617-61321 1499 EA 324-982106 AN 8 324-982108 AN 10 $1899 EA AN 4 324-980404 617-61331 2299 EA 324-982110 1799 EA AN 8 324-980408 617-61341 2299 EA $599 EA 599 EA N/A 3699 EA FLARE TEE 599 EA BLACK BLUE 699 EA 324-9804031 $1499 EA BLACK 899 EA AN 3 617-4298 617-42981 899 EA 324-9804041 1099 EA AN 4 617-6100 617-61000 1199 EA 324-9804081 1799 EA AN 6 617-6102 617-61021 AN 8 617-6103 617-61031 $399 EA STRAIGHT BULKEAD BLACK $799 EA AN 10 617-6104 617-61041 799 EA BLUE 617-61161 AN 12 617-6105 617-61051 899 EA 899 EA AN 3 617-6116 617-61171 899 EA FEMALE SWIVEL RUN TEE 1299 EA 617-61181 899 EA 617-614403 AN 3 999 EA AN 4 617-6117 617-61191 1199 EA 617-614404 AN 4 AN 6 617-6118 617-61201 1799 EA 1317 EA AN 8 617-6119 617-61211 2999 EA FLARE PLUGS BLACK AN 10 617-6120 N/A BLUE 617-60171 $999 EA AN 12 617-6121 999 EA AN 16 617-6122 AN 3 617-6017 617-60181 617-60191 1299 EA BULKHEAD NUTS BLACK $699 PR AN 4 617-6018 617-60201 1399 EA BLUE 617-61871 AN 6 617-6019 617-60211 1399 EA 599 PR AN 8 617-6020 617-60221 1299 EA AN 3 617-6187 617-61881 599 PR AN 10 617-6021 617-60231 1699 EA 617-61891 599 EA AN 12 617-6022 2099 EA AN 4 617-6188 617-61901 699 EA AN 16 N/A AN 6 617-6189 617-61911 699 EA $1399 EA AN 8 617-6190 617-61921 1199 EA STRAIGHT THREAD PLUG 1199 EA AN 10 617-6191 N/A 1299 EA AN 12 617-6192 BLUE BLACK 1399 EA AN 16 617-6193 AN 4 617-6026 617-60261 1399 EA 1599 EA FLARE UNION AN 6 617-6027 617-60271 BLUE BLACK AN 8 617-6028 617-60281 AN 3 617-6033 617-60331 $699 EA AN 10 617-6029 617-60291 AN 4 617-6034 617-60341 799 EA AN 12 617-6030 617-60301 AN 6 617-6035 617-60351 799 EA 999 EA AN 16 617-6031 N/A AN 8 617-6036 617-60361 999 EA 699 EA SWIVEL COUPLERS AN 10 617-6037-A 617-60371 1599 EA 617-3998 AN 3 2199 EA AN 10 617-6037-S N/A 617-3999 AN 4 617-4000 AN 6 AN 12 617-6038 617-60381 617-4001 AN 8 617-4002 AN 10 AN 16 617-6039 N/A 617-4009 AN 6 - 90° 617-4010 AN 8 - 90° FLARE CAPS BLACK $799 EA 617-4011 AN 10 - 90° BLUE 617-61941 899 EA AN FEMALE TO AN MALE REDUCERS AN 3 617-6194 617-61951 899 EA 472-995008 617-61961 999 EA AN 8 - AN 6 AN 4 617-6195 617-61971 999 EA AN 6 617-6196 617-61981 1199 EA 472-995110 AN 8 - AN 10 AN 8 617-6197 617-61991 1199 EA AN 10 617-6198 617-62001 472-995011 AN 10 - AN 8 AN 12 617-6199 472-995112 AN 16 617-6200 AN 10 - AN 12 AN SIZE METAL TUBE O.D. THREAD SIZE AN SIZE METAL TUBE O.D. THREAD SIZE 472-995012 AN 12 - AN 8 3 3⁄16” 3⁄8”-24 SAE 8 1⁄2” 3⁄4”-16 SAE 4 1⁄4” 7⁄16”-20 SAE 10 5⁄8” 7⁄8”-14 SAE 472-995013 AN 12 - AN 10 5 5⁄16” 1⁄2”-20 SAE 12 3⁄4” 11⁄16”-12 SAE 6 3⁄8” 9⁄16”-18 SAE 16 1” 15⁄16”-12 SAE AN THREAD SIZE CHART 320 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing A | ALUMINUM PIPE FITTINGS AND COUPLERS MALE PIPE NIPPLE 617-6150 ALLEN PIPE PLUG $699 2/PK 1⁄8” $699 EA 617-6203 1⁄8” 617-6151 1⁄4” 999 EA 899 2/PK 617-6152 3⁄8” 617-6204 1⁄4” 999 2/PK 1199 EA 617-6205 3⁄8” 799 EA ALUMINUM PIPE COUPLER 617-6206 1⁄2” 999 EA 617-6144 $799 EA 617-6207 3⁄4” 699 EA 1⁄8” 699 EA 617-6208 1” 617-6145 1⁄4” 899 EA 617-6146 3⁄8” PIPE BUSHING REDUCER 617-6147 1⁄2” 1099 EA 617-6155 1⁄4” - 1⁄8” $599 EA ALUMINUM FEMALE PIPE TEE $1399 EA 617-6156 3⁄8” - 1⁄4” 617-6171 1499 EA 617-6157 3⁄8” - 1⁄8” 799 EA 1⁄8” 1899 EA 617-6158 1⁄2” - 3⁄8” 599 EA 617-6172 1⁄4” 2599 EA 617-6160 1⁄2” - 1⁄8” 999 EA 617-6173 3⁄8” 699 EA 617-6174 1⁄2” B | ALUMINUM PIPE TO AN ADAPTERS BLUE, BLACK AND NICKEL PLATED ALUMINUM STRAIGHT FLARE ADAPTERS BLUE PRICE BLACK PRICE NICKEL PRICE 617-6041 $699 EA 617-60411 $799 EA N/A N/A AN 3 1⁄8” 599 EA 617-95201 599 EA N/A N/A 699 EA 617-60421 799 EA N/A N/A AN 3 1⁄8” FEMALE 617-9520 599 EA 617-95211 599 EA N/A N/A 799 EA 617-60431 799 EA N/A N/A AN 4 1⁄8” 617-6042 799 EA 617-60441 899 EA 617-60440 $899 EA AN 4 1⁄8” FEMALE 617-9521 799 EA 617-60451 799 EA 617-60450 899 EA 617-6043 899 EA 617-60461 899 EA 617-60460 899 EA AN 4 1⁄4” 899 EA 617-60471 899 EA N/A N/A AN 6 1⁄4” 617-6044 999 EA 617-60481 999 EA 617-60480 899 EA 899 EA 617-60491 999 EA 617-60490 1099 EA AN 6 1⁄8” 617-6045 1399 EA 617-60601 1399 EA N/A N/A AN 6 3⁄8” 617-6046 899 EA 617-60501 999 EA 617-60500 1999 EA 1499 EA AN 8 1⁄4” 617-6047 1299 EA 617-70031 1399 EA 617-70030 1599 EA AN 8 3⁄8” 617-6048 1299 EA 617-60511 1299 EA 617-60510 1599 EA 1299 EA 617-60521 1299 EA 617-60520 AN 8 1⁄2” 617-6049 N/A 1899 EA N/A N/a N/A N/A AN 10 3⁄4” 472-981613 1899 EA N/A N/A N/A AN 10 1⁄2” 617-6050 AN 10 3⁄8” 617-7003 AN 12 3⁄4” 617-6051 617-6052 AN 12 1⁄2” AN 16 1” 617-6053 AN 16 3⁄4” 617-6054 45° FLARE ADAPTERS BLUE PRICE BLACK PRICE NICKEL PRICE 617-6093 $1099 EA 617-60931 $1099 EA N/A N/A AN 3 1⁄8” 999 EA N/A N/A AN 4 1⁄8” 617-6094 999 EA 617-60941 1099 EA 617-60950 $1399 EA 1199 EA N/A AN 6 1⁄4” 617-6095 1199 EA 617-60951 1899 EA 617-60970 1699 EA 2499 EA N/A 1999 EA AN 8 3⁄8” 617-6096 1199 EA 617-60961 2199 EA AN 10 1⁄2” 617-6097 1499 EA 617-60971 AN 12 3⁄4” 617-6098 2199 EA 617-60981 90° FLARE ADAPTERS BLUE PRICE BLACK PRICE NICKEL PRICE 617-6079 $1099 EA 617-60791 $1299 EA N/A N/A AN 3 1⁄8” N/A 699 EA N/A N/A AN 3 1⁄8” FEMALE 617-9522 699 EA 617-95221 1199 EA N/A N/A N/A AN 4 1⁄8” 617-6080 1199 EA 617-60801 699 EA N/A 1099 EA N/A $1299 EA AN 4 1⁄8” FEMALE 617-9523 699 EA 617-95231 1599 EA 617-6081 1099 EA 617-60811 999 EA 617-60820 1899 EA AN 4 1⁄4” 1199 EA 617-60830 1599 EA 617-60840 N/A AN 6 1⁄4” 617-6082 999 EA 617-60821 1599 EA 1599 EA N/A 2199 EA AN 6 1⁄8” 617-6083 1199 EA 617-60831 1199 EA 617-60860 1899 EA 617-60870 2099 EA AN 6 3⁄8” 617-6084 1399 EA 617-60841 2799 EA 1599 EA 617-60880 2299 EA AN 8 1⁄4” 617-6085 1599 EA 617-60851 2399 EA 617-60890 N/a 617-60900 N/A AN 8 3⁄8” 617-6086 1199 EA 617-60861 N/A N/a N/A AN 8 1⁄2” 617-6087 1799 EA 617-60871 N/a N/A AN 10 1⁄2” 617-6088 1599 EA 617-60881 AN 12 3⁄4” 617-6089 2199 EA 617-60891 AN 12 1⁄2” 617-6090 2099 EA N/A AN 16 1” 617-6091 2899 EA N/A AN 16 3⁄4” 617-6092 2699 EA N/A PIPE TEE ON RUN BLUE BLACK 617-6110 617-61101 $1299 EA FLARE TO PIPE TEE BLUE BLACK AN 3 ( 1⁄8\" NPT) 617-61111 899 EA 617-6106 617-61061 617-61121 999 EA AN 3 ( 1⁄8\" NPT) $1199 EA AN 4 ( 1⁄8\" NPT) 617-6111 617-61071 617-6112 617-61131 1299 EA AN 4 ( 1⁄8\" NPT) 617-6107 617-61081 899 EA AN 6 ( 1⁄4\" NPT) 617-61141 1599 EA 617-61091 999 EA N/A 3599 EA AN 6( 1⁄4\" NPT) 617-6108 617-61011 1199 EA AN 8 ( 3⁄8\" NPT) 617-6113 1699 EA AN 8 ( 3⁄8\" NPT) 617-6109 AN 10 ( 1⁄2\" NPT) 617-6114 AN 10 ( 1⁄2\" NPT) 617-6101 AN 12 ( 3⁄4\" NPT) 617-6115 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 321

FITTINGS || Plumbing A | CARBURETOR FITTINGS D | WELD BUNG FITTINGS - AN 6 Holley Single - AN 8 Holley 4150 / Feed 600-660 Series, 4160 Dual Feed 750 SIZE STEEL PRICE ALUMINUM PRICE - Holley Dual feed thru Dominator 1⁄8” NPT FEMALE 617-6701 $599 EA 617-6801 $699 EA 4010-4011 Series and 1350 Series 1⁄4” NPT FEMALE all two barrel series - Quadrajet up to 1974 3⁄8” NPT FEMALE 617-6702 599 EA 617-6802 699 EA with 9⁄16” -24 thread - 7⁄8” -20 thread 1⁄2” NPT FEMALE 617-6703 699 EA 617-6803 899 EA 3⁄4” NPT FEMALE 617-6704 799 EA 617-6804 1099 EA 617-4020 AN 6 MALE $1299 PR 617-4021 AN 8 MALE $1599 PR 1” NPT FEMALE 617-6706 999 EA 617-6806 1299 EA N/A 1599 EA 617-2248 AN 8 FEMALE 3799 EA 617-2192 AN 8 FEMALE 999 EA AN 4 MALE N/A 617-6808 AN 6 MALE 617-7104 899 EA 427-1081 9⁄16” ALM. FITTING GASKET 443 PR 427-26102 7⁄8\" NYLON GASKET 469 PR AN 8 MALE 617-7106 599 EA 617-7204 899 EA AN 10 MALE 617-7108 599 EA 617-7206 899 EA - AN 6 Holley 4150 / 4160 - AN 6 Ford, Chrysler AN 12 MALE 617-7110 699 EA 617-7208 999 EA Dual Feed 750 thru and early Chevy AN 16 MALE 617-7112 799 EA 617-7210 1399 EA Dominator 1350 Series fuel pumps 617-7116 1199 EA 617-7212 1899 EA - Quadrajet up to 1974 - 1⁄2” - 20 inverted 1399 EA 617-7216 - 7⁄8” -20 thread flare thread 617-4022 $1399 PR 617-4033 $1099 EA 427-26102 7⁄8” NYLON FITTING GASKET 469 PR - AN 6 Chevy fuel pumps - AN 6 Carter AFB E | CARB ADAPTERS (1970 and later) - Carter two and - Holley inline filters four barrel 617-40808 AN 8 FITTING FOR BRASWELL/HOLLEY HP CARB $1799 UP - 5⁄8” - 18 inverted - 5⁄8 “-20 thread AN 8 FITTING FOR DEMON CARB flare thread 617-4024 617-2111 AN 8 FITTING FOR BOSS CARB 1499 EA 617-4919471 2699 EA 617-4038 $1199 EA $899 EA F | INLINE FUEL PRESSURE ADAPTER - AN 6 Holley Single - Use for inline pressure port - Feed 600-660 Series and all two barrel series - AN 6 Carter AFB 617-7000 AN 6-AN 6 WITH 1⁄8” NPT PORT - BLUE $1399 EA - Banjo fitting assembles Edelbrock 617-7001 AN 8-AN 8 WITH 1⁄8” NPT PORT - BLUE 1299 EA directly to hose - Assembles - 9⁄16” -24 thread directly on hose 617-70001 AN 6-AN 6 WITH 1⁄8” NPT PORT - BLACK 1399 EA - 5⁄8”-20 banjo fitting 617-70011 AN 8-AN 8 WITH 1⁄8” NPT PORT - BLACK 1799 EA 617-4023 $2499 EA 617-4027 $1795 EA 617-7005 AN 6 TO 3⁄8” NPT WITH 1⁄8” NPT PORT - BLUE 1199 EA 617-7008 AN 8 TO 3⁄8” NPT WITH 1⁄8” NPT PORT - BLUE 1499 EA 427-1081 9⁄16” NYLON FITTING GASKET 443 PR - AN 10 3⁄8” NPT Holley G | REPLACEMENT O-RINGS - AN 6 Quadra-jet, Electric fuel pumps FOR AN FITTINGS 1975 and later and regulators - 1”-20 thread - Designed for standard fuel or oil 617-4035 - 3⁄8” NPT - EPR2 O-rings are for alcohol or nitro $999 EA 617-7003 $1299 EA 617-3472 AN 3, NITRILE 1 $599 BG 617-3462 AN 3, EPR2 $599 BG AN 4, EPR2 BLUE BLACK HOSE PORT STYLE PRICE 617-3473 AN 4, NITRILE 1 599 BG 617-3463 AN 6, EPR2 599 BG 617-7007 617-70071 AN 6 AN 10 STR $999 EA 617-3474 AN 6, NITRILE 1 799 BG 617-3464 AN 8, EPR2 799 BG 617-3475 AN 8, NITRILE 1 799 BG 617-3465 AN 10, EPR2 899 BG 617-7010 617-70101 AN 6 AN 6 STR 1299 EA 617-3476 AN 10, NITRILE 1 799 BG 617-3466 AN 12, EPR2 899 BG AN 8 STR 1299 EA 617-3477 AN 12, NITRILE 1 899 BG 617-3467 AN 16, EPR2 899 BG 617-7011 617-70111 AN 6 AN 6 STR 1299 EA 617-3497 AN 16, NITRILE 1 899 BG 617-3468 AN 20, EPR2 899 BG AN 8 STR 1599 EA 617-3498 AN 20, NITRILE 1 899 BG 617-3469 1169 BG B | HIGH-FLOW 617-7012 617-70121 AN 8 AN 10 STR 1899 EA O-RING PORT 617-7013 617-70131 AN 8 AN 8 STR 2299 EA H | STAT-O-SEALS FITTINGS 617-7014 617-70141 AN 8 AN 10 STR 2599 EA 617-7015 617-70151 AN 10 AN 12 STR 2499 EA - Synthetic rubber o-ring bonded to an aluminum crush washer - Withstands temperatures from 85°F - 450°F 617-7016 617-70161 AN 10 AN 10 STR 1699 EA AN 12 STR 2499 EA 617-7017 617-70171 AN 10 617-7018 617-70181 AN 12 617-9061 AN 4 $399 EA 617-7019 617-70191 AN 12 AN 6 617-9062 AN 8 399 PR BLUE BLACK HOSE PORT STYLE PRICE 617-9063 AN 10 499 PR 617-9064 999 EA 617-7020 617-70201 AN 6 AN 6 45° $2299 EA AN 8 45° 2099 EA 617-7021 617-70211 AN 8 AN 10 45° 3599 EA J | TEFLON SEALING WASHERS AN 12 45° 2753 EA FOR BULKHEAD FITTINGS 617-7022 617-70221 AN 10 AN 6 90° 1899 EA AN 8 90° 2099 EA - Use to seal bulkhead fittings to fuel cells, 617-7023 617-70231 AN 12 AN 10 90° 3599 EA oil tanks and other low pressure situations AN 12 90° 2999 EA - Specify AN size when ordering 617-7024 617-70241 AN 6 AN 10 STR 1599 EA 617-7025 617-70251 AN 8 617-7026 617-70261 AN 10 617-7027 617-70271 AN 12 617-1097-SIZE AN 6, 8 $399 PR 617-1097-SIZE AN 10, 12 OR 16 399 PR 617-7028 617-70281 AN 4 C | ENDURA FINISH PIPE PLUGS K | INLINE FITTING WITH PRESSURE TAP 617-66203 1⁄8” NPT $695 PR 617-7029 AN 4 WITH 1⁄8” NPT FEMALE $995 EA 1⁄4” NPT AN 6 WITH 1⁄8” NPT FEMALE 617-66204 3⁄8” NPT 695 PR 617-7034 AN 8 WITH 1⁄8” NPT FEMALE 1599 EA 617-66205 1⁄2” NPT 595 PR 617-7035 AN 10 WITH 1⁄8” NPT FEMALE 1195 EA 617-66206 3⁄4” NPT 395 EA 617-7036 1295 EA 617-66207 495 EA 322 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing TUBE NUT C | TUBE NUT TUBING A | EFI ADAPTERS COUPLERS AND SLEEVES TUBE SLEEVE EFI ADAPTERS RED/BLUE BLACK PRICE 617-491962 617-4919621 $999 EA - You need to flare the tube to -6 X 14MM X 1.5 MALE, EFI OR P/S 37° to match the AN fittings - Not for use with 45° flared lines 37° FLARED -6 X 16MM X 1.5 MALE, EFI OR P/S 617-491963 617-4919631 999 EA TUBE END -6 X 18MM X 1.5 MALE, EFI OR P/S 617-491964 N/A 999 EA TUBE NUT COUPLERS -6 X 14MM X 1.5 FEMALE, “O” RING SEAL 617-491970 617-4919701 1399 EA -6 X 16MM X 1.5 FEMALE, “O” RING SEAL 617-491971 N/A 1399 EA QTY AN TUBE BLUE PRICE BLACK PRICE 617-6055 $899 SET/6 617-60551 $899 SET/6 -8 X 14MM X 1.5 FEMALE, “O” RING SEAL 617-491982 617-4919821 1999 EA -8 X 16MM X 1.5 FEMALE, “O” RING SEAL 617-491983 617-4919831 1999 EA 6 3 3⁄16” 617-6056 899 SET/6 617-60561 199 SET/6 617-6057 799 PR 617-60571 899 PR 6 4 1⁄4” 617-6058 799 PR 617-60581 799 PR -6 X FORD EFI, .550” SHANK 617-491985 617-4919851 1999 EA 799 EA 2 6 3⁄8” 617-6059 399 EA 617-60591 -6 X FORD EFI RETURN, .435” SHANK 617-491986 617-4919861 1999 EA PRICE 2 8 1⁄2” $799 SET/6 -8 X FORD EFI, .550” SHANK 617-491987 617-4919871 2099 EA 1 10 5⁄8” 199 SET/6 -6 X 3⁄8” FEMALE, EFI ADAPTER N/A 617-4919891 2399 EA SLEEVES 799 PR -6 X 5⁄16” FEMALE, EFI ADAPTER N/A 699 PR -8 X 3⁄8” FEMALE, EFI ADAPTER N/A 617-4919901 2399 EA QTY AN TUBE BLUE PRICE BLACK 699 EA 617-4919921 2499 EA 617-6063 $799 SET/6 617-60631 6 3 3⁄16” -8 X FORD EFI FUEL TANK OUTLET, .570” ID N/A 617-4919911 1999 EA 617-6064 799 SET/6 617-60641 6 4 1⁄4” 617-6065 699 PR 617-60651 -6 FEMALE X 3⁄8” MALE EFI ADAPTER N/A 617-4919951 1699 EA 617-6066 699 PR 617-60661 2 6 3⁄8” 617-6067 699 EA 617-60671 -6 90° X 3⁄8” FEMALE EFI ADAPTER N/A 617-4919981 2799 EA 2 8 1⁄2” 1 10 5⁄8” D | TUBING TO AN FLARE ADAPTERS 617-63920 AN6 FEMALE TO 3⁄8” TUBING $795 EA B | REDUCERS 617-63921 AN6 MALE TO 3⁄8” TUBING 895 EA AND EXPANDERS 617-63922 AN8 FEMALE TO 1⁄2” TUBING 895 EA REDUCERS - STRAIGHT RED/BLUE BLACK PRICE 617-63923 AN8 MALE TO 1⁄2” TUBING 1095 EA 617-2201071 $1399 EA AN-8 NUT TO AN -6 HOSE 617-220107 617-2201091 1899 EA AN-10 NUT TO AN -8 HOSE 617-220109 617-2201151 3299 EA BLACK PRICE AN-16 NUT TO AN -12 HOSE 617-220115 617-2245071 $2899 EA Tubing Diameters REDUCERS - 45 RED/BLUE N/A 1⁄4” 3⁄8” AN-8 NUT TO AN -6 HOSE 617-224507 1943 EA Tube Beader N/A AN-10 NUT TO AN -8 HOSE 617-224509 BLACK 2834 EA 617-2290071 PRICE AN-16 NUT TO AN -12 HOSE 617-224515 617-2290091 $2899 EA REDUCERS - 90 RED/BLUE AN-8 NUT TO AN -6 HOSE 617-229007 617-2290151 3199 EA E | ALUMINUM FUEL LINE 1⁄2” 5⁄8” BLACK AN-10 NUT TO AN -8 HOSE 617-229009 617-2315071 4799 EA - Easy to flare and bend $1299 ROLL PRICE - Save weight and money 1899 ROLL AN-16 NUT TO AN -12 HOSE 617-229015 617-2315091 - Not recommended for high pressure applications 1899 ROLL $2429 EA 2099 ROLL REDUCERS - 150 RED/BLUE 617-2315151 2999 ROLL AN-8 NUT TO AN -6 HOSE 617-231507 BLACK 3899 EA 910-11429-10 1⁄4” O.D. X 10 FT. 2299 ROLL 617-2318071 910-11429-20 1⁄4” O.D. X 20 FT. 2899 ROLL AN-10 NUT TO AN -8 HOSE 617-231509 3599 EA 3099 ROLL 617-2318091 PRICE 910-11430-10 3⁄8” O.D. X 10 FT. 3499 ROLL AN-16 NUT TO AN -12 HOSE 617-231515 617-2318151 910-11430-20 3⁄8” O.D. X 20 FT. 3499 ROLL $3199 EA 910-11430-30 3⁄8” O.D. X 30 FT. 3999 ROLL REDUCERS - 180 RED/BLUE BLACK 5156 EA AN-8 NUT TO AN -6 HOSE 617-231807 617-2201051 3799 EA 910-11440-10 1⁄2” O.D. X 10 FT. 4883 EA 2753 EA 910-11440-20 1⁄2” O.D. X 20 FT. 4883 EA AN-10 NUT TO AN -8 HOSE 617-231809 617-2201111 PRICE 910-11440-30 1⁄2” O.D. X 30 FT. $999 EA AN-16 NUT TO AN -12 HOSE 617-231815 N/A 910-11441-10 5⁄8” O.D. X 10 FT. BLACK 2199 EA 910-11441-20 5⁄8” O.D. X 20 FT. EXPANDERS - STRAIGHT RED/BLUE 617-2245051 910-11441-30 5⁄8” O.D. X 30 FT. AN-6 NUT TO AN -8 HOSE 617-220105 3299 EA 617-2245111 PRICE 425-008ERL 3⁄8” TUBE BEADER AN-10 NUT TO AN -12 HOSE 617-220111 425-009ERL 1⁄2” TUBE BEADER 617-2245131 $2499 EA 425-010ERL 5⁄8” TUBE BEADER AN-12 NUT TO AN -16 HOSE 617-220113 BLACK 617-2290051 3599 EA EXPANDERS - 45 RED/BLUE AN-6 NUT TO AN -8 HOSE 617-224505 617-2290111 4399 EA PRICE AN-10 NUT TO AN -12 HOSE 617-224511 617-2290131 BLACK $2399 EA AN-12 NUT TO AN -16 HOSE 617-224513 617-2318051 3699 EA F | VACUUM AND BRAKE EXPANDERS - 90 RED/BLUE 617-2318111 BOOSTER PORT AN-6 NUT TO AN -8 HOSE 617-229005 617-2318131 4599 EA PRICE - 3⁄8” NPT aluminum fitting screws into the intake manifold AN-10 NUT TO AN -12 HOSE 617-229011 behind the carburetor and has two 1⁄8” NPT ports $3299 EA - Includes fittings that accept a 1⁄4” hose and a 3⁄8” hose AN-12 NUT TO AN -16 HOSE 617-229013 - 1⁄8” NPT plug is also included 2672 EA EXPANDERS - 180 RED/BLUE 3329 EA AN-6 NUT TO AN -8 HOSE 617-231805 AN-10 NUT TO AN -12 HOSE 617-231811 916-11020 $3099 EA AN-12 NUT TO AN -16 HOSE 617-231813 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 323

TOOLS || AN Wrenches A | ALUMINUM AN WRENCHES G | VISE SOFT-JAW INSERTS - Designed with the correct length handle to avoid over-tightening - Will keep your AN fittings looking great during and after assembly - Each wrench has the fitting size stamped on it for easy identification - Aluminum insert firmly holds the hex portion of the fitting without - AN 3, AN 4, AN 6, AN 8, AN 10, AN 12, AN 16 and AN 20 marring the anodized or plated finish - Includes free carrying case - Can be used with any size AN fittings from AN 3 to AN 32 - As a bonus, the long horizontal pockets in the inserts will hold the braided hose while cutting 617-3661 $2399 PR 910-89800 $6999 SET H | KOUL INSTALLATION B | AN WRENCH SET TOOL FOR BRAIDED HOSE - 30° and 45° angle ends for each size are on different 617-9510 AN 4, AN 6, AN 8 $7350 SET wrenches and allow you to AN 6, AN 8, AN 10 hold the adapter with one 617-9512 AN 10, AN 12, AN 16 7840 SET wrench and loosen the hose 617-9511 AN 4 THROUGH AN 16 PRO KIT 8820 SET with another 617-9513 14700 SET - Anodized aluminum - Won’t damage fittings $5999 SET - Sizes AN 6, AN 8, AN 10 and AN 12 910-89810 C | AN FITTING J | SOCKETLESS FITTING WRENCH SET INSTALLATION TOOL AND LUBE - Stamped for easy identification - Lube the inside of the hose, clamp the hose and give the lever a pull - Includes AN# 4, 6, 8, 10, 12, - For AN 4, 6, 8 push-on, straight fittings only and 16Sizes AN 6, AN 8, AN 10 and AN 12 $4799 SET 617-3632 INSTALLATION TOOL $4599 EA 910-89811 617-3553 LUBE, PINT 1499 EA K | TEFLON HOSE TOOL - Designed to seat Teflon tube against a sleeve - Use with smooth-bore Teflon hose in sizes AN 3, AN 4, AN 5, AN 6, AN 8, AN 10 and AN 12 D | AN FITTING HOLDING FIXTURE 617-3646 $3999 EA - Allows you to clamp the fitting securely in a vise, and not tear it up - Made of high-impact plastic 910-89830 $2599 EA ALU-AL | SCSOONRICTAMLESNETAL E | ADJUSTABLE MINUM - Immediate and permanent AN WRENCH field repairs - 8” aluminum adjustable wrench - For damaged hose ends - Opens to 1.25” - For 37° adapter fitting cones and seats 910-89805 $4299 EA - Easily installed F | HEAVY - Includes 4 each of the following DUTY BRAIDED sizes: -3, -4, -6, -8, -10, -12, -16 HOSE CUTTER 425-169101ERL CONICAL SEAL ASSORTMENT - 30 PIECES $8310 EA - Precision ground blades AN-3 CONICAL SEALS - 4 PIECES - Makes cutting stainless steel 425-169103ERL AN-4 CONICAL SEALS - 4 PIECES 1747 EA hose a breeze 425-169104ERL AN-6 CONICAL SEALS - 4 PIECES 1747 EA - 181⁄2” cuts up to AN 16 hose 425-169106ERL AN-8 CONICAL SEALS - 4 PIECES 1747 EA 425-169108ERL AN-10 CONICAL SEALS - 4 PIECES 1747 EA 425-169110ERL 1747 EA 910-89802 181⁄2” 1747 EA $2499 EA 425-169212ERL AN-12 CONICAL SEALS - 4 PIECES 324 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Jacks and Stands D | BRUNNHOELZL A | GOJAC SELF ALUMINUM JACK LOADING DOLLIES - 3 pump version - 5211 model is for tires up to 11” wide, 32” tall and 1250 lb. each - Weighs only 32 lbs. - 6200 model is good for tires 13” wide, 36” tall and 1550 lb. each - Minimum height 3 ¼”, - We recommend the storage rack to keep your investment up off maximum height is 171⁄8” the floor and organized when not in use - Includes 40” long - Sold as each - 1-piece handle - Black only 910-82365 3-PUMP JACK $94099 EA 880-5000 5211 MODEL GOJAC $22320 EA 910-82366 7399 EA 6200 MODEL GOJAC 910-82367 DIRT WINGS 9400 EA 880-6200 GOJAK MASTER SET WITH RACK 24639 EA JACK SEAL KIT 910-8568 GOJAK LH & RH 13\" WHEEL DOLLY 104949 EA 910-9398 STORAGE RACK E | GO-CART 880-456 47999 EA DOLLIE 9265 EA - Heavy-duty steel construction $41000 PR B | 1000 LB. - Available in sets of two or four WHEEL DOLLIES - Durable powder coat finish $24599 SET - Flat free polymer wheels - A set of these wheel dollies allows one 11999 PR for easy rolling person to move a car around in their garage - Non-skid polymer rollers - Each dolly rated to support 1000 lb. resists load slippage - 14” wide, 15” long - Expandable frame accommodates variable tire sizes 910-81107 SET OF FOUR - Move heavy loads with confidence and ease 910-81109 SET OF TWO - 1,500 lbs load rating 910-0595 $12599 PR F | ALUMINUM JACK STANDS - Made of 3⁄16” material but still weigh less than 7 lb. each - 151⁄2” x 10” footprint offers superior stability and won’t sink into the dirt - 3000 lb. capacity 910-81140 G | WIDE BASE $18799 SET OF 4 C | BERT ALUMINUM WEIGHS JUST JACK STANDS BUMPER JACK 55 LB. $127499 EA - 142 sq. in. of support - Air operated @ min 50 psi - Won’t sink into the ground - Completely collapsible and - Large 15” x 91⁄2” base weighs only 55 lb. - 12” height, steel construction - Ideal for cars with 910-81103 tubular bumpers - 36” maximum lift height H | HEAVY DUTY - Rated to 2500 lb. WHEEL DOLLIES 736-5000 JACK - Constructed of 1⁄4” steel plate that is professionally primed and painted - Four zinc plated ball bearing castors contain extra wide rollers made from shock resistant phenolic plastic - Each dolly can support up to 1500 lb., and up to 6000 lb. with four dollies - Wheel dolly measures 12” x 16” to easily accommodate virtually any size tire Add either the rolling rack or wall mount rack to keep them organized 1 910-81108 STANDARD SET OF FOUR DOLLIES $19999 SET OF 4 910-81148 HEAVY DUTY SET OF FOUR DOLLIES ROLLING RACK 24899 SET OF 4 2 910-81138 WALL MOUNT RACK 3 910-81141 4 LUG DOLLY ROLL AROUND ADAPTER 8799 EA 5 LUG DOLLY ROLL AROUND ADAPTER 910-98077 MOD DOLLY ROLL AROUND ADAPTER 4499 EA 910-98074 W5 DOLLY ROLL AROUND ADAPTER 910-98118 13199 PR 910-59059 13199 PR 13199 PR 13899 PR 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 325

TOOLS || Scales A | LONGACRE ACCUSET II SCALES D | ECONOMY - Push one button for all 4 wheel weights plus cross weight SCALE SYSTEM - Push a second button for partial % $82299 EA - Baseline memory recall - Perfect for Dwarf cars, - Heavy duty red HiFlex cables Pony Stock and with billet AN connectors Tuner classes - 4 LMFTM swirl finished 15” x 15” low profile pads - Oversized, easy to read - 1500 lb. per pad capacity, 6000 lb. total digital display - 2-year limited warranty - Display box mounted in carrying case - 20 ft. cables are labeled for correct hook-up - .01 percent accuracy - 141⁄2“ x 91⁄2“ x 21⁄2” pads - 1250 lb. per pad, 5000 lb. total capacity - Powered by four AA batteries 586-67650 475-72593 WITH FREE SCALE PAD BOX $139999 KIT E | 7000LB SLIM WIRELESS 475-72592 ACCUSET II SCALES WITH CART 157900 KIT VEHICLE SCALE - 15\" x 15\" slim aluminum scale pads (15⁄16\" thick) - Low angle drive-up weighing pads (no ramps necessary) - Live stream data feed via USB cable to computer - Backlit LCD screen and control buttons - Foam lined hard shell case with wheels and extendable handle - AA batteries included 586-67644 $93699 SET B | E-Z WEIGH SCALES TABLET INCLUDED - 15” x 15” x 21⁄2” billet, flat scale pads - 1500 lb. capacity per pad, 6000 lb. total F | COMPUTERSCALES® - Certified to .01 percent accuracy WIRELESS TABLET XLI™ - 1⁄2” display characters - Backlit display - 7\" Android™ tablet with high - Standard 9V battery operation resolution screen, folio case, - Large, easy-to-read display of weights and percentages screen protector and stylus included - 2 year full warranty - Ready to use right out of the box - Customizable Display 300-500 WITH FREE SCALE PAD BOX $114500 KIT - Show only what you want to see, rotate or change the car icon, 300-499 E-Z WEIGH SCALES WITH CART 132500 KIT change the partial weight % resolution or weight units 475-2715 WITH FREE SCALE PAD BOX $199999 KIT 475-2714 COMPUTERSCALES WIRELESS TABLET XLI SCALES WITH CART 217999 KIT G | ROLL-OFF LEVELERS - Lets you easily roll your car off the scale pads, then back on again to eliminate camber bind - Has a rigid formed and welded aluminum construction - Features integrated wheel stops on two roll-offs for safety - Comes in a set of 4 for 21⁄2\" scale pads C | GEN3 1 WEIGH 475-72905 $139999 EA WIRED SCALE SYSTEM H | CHASSIS - Full-time display of four individual wheel weights and SET-UP/TIRE CHART total vehicle weight - or - ALL percentages at once on one oversized, easy-to-read display - Punched for 3 ring binder - Touch of one button displays either weights or percentages - 1 pad of 50 sheets - 1 slot memory 475-22528 - Carrying case for electronics and tangle free cables 910-82115 WITH FREE SCALE PAD BOX $100899 KIT $1999 EA 910-82116 1 WEIGH SCALE SYSTEM WITH CART 118899 KIT 326 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Scales E | SW787 WIRELESS A | SW650 SCALE SYSTEM QUICKWEIGH WIRELESS - 15” x 15” x 2.5” wireless billet pads SCALES - RaceWeigh software for PC - AA alkaline batteries for scale pads - No cables, no antennas - 1,500 lb. pad capacity, 6,000 lb. system capacity - Completely portable - 2 year warranty - Uses AA batteries, 400 hr. average life - Laptop not included - 15” x 15” x 21⁄2” billet flat scale pads - 1,500 lb. capacity per pad, 6,000 lb. total 300-787 WITH FREE SCALE PAD BOX $174099 KIT - Has printer and computer interface outputs 300-786 SW787 WIRELESS SCALE SYSTEM WITH CART 192099 KIT - Displays to .01 lb. - 2 year warranty - Now Bluetooth compatible 300-650 WITH FREE SCALE PAD BOX $182999 KIT 300-649 SW650 QUICK WEIGH WIRELESS SCALES WITH CART 200999 KIT F | COMPUTERSCALES® HYBRID DX3 B | COMPUTER - 9.7\" Android™ tablet included SCALES® with high resolution screen, case, screen protector and charger included HYBRID DX2 - Change the main screen display order to suit your preferences - show only what you want to see, rotate or change the car icon, change - 7\" Android™ tablet included the partial weight % resolution or weight units - with high resolution screen, - Alternate background skins, Standard Red, Industrial Black and case, screen protector and charger included High Contrast White - easier to read in bright sunlight - Change the main screen display order to suit your preferences - - Name your memory locations - title, date, track, etc. - your choice show only what you want to see, rotate or change the car icon, - Note taking and main screen shown side-by-side change the partial weight % resolution or weight units - Keep a record of the changes made and the results - Name your memory locations - title, date, track, etc. - your choice - Save all your stored weights and notes with the tap of a button - Note taking - Easily email or connect to PC for download - Keep a record of the changes made and the results - Save all your stored weights and notes with the tap of a button 475-726171 WITH FREE SCALE PAD BOX $169999 KIT - Easily email or connect to PC for download 475-726172 VISION SCALE SYSTEM WITH CART 187999 KIT 475-726131 WITH FREE SCALE PAD BOX $145699 KIT 475-726132 DX1 SCALE SYSTEM WITH CART 181899 KIT G | SW777 WIRELESS SCALES - No cables, no antennas C | COMPUTER - Completely portable SCALES ACCUSET II - Uses AA batteries, 400 hr. average life - Has printer interface outputs 1100 LB/PAD - 15” x 15” x 21⁄2” billet flat scale pads - Displays to .01 lb. - 1,500 capacity per pad, 6000 lb. total - USB PC radio - Simple to use - just push 2 buttons to get everything you need - Includes RaceWeigh software for PC - 2 year warranty - Heavy duty Red HiFlex Poly cables with Billet AN connectors - Includes 6 ft. serial cable for computer - Face is slanted for easier viewing - Now Bluetooth compatible - Four 12\" x 12\" x 2-3/4\" tall powder coated pads - Includes Silver carrying case for electronics and cables 300-777 WITH FREE SCALE PAD BOX $194500 KIT - 2-year limited warranty 300-776 SW777 WIRELESS SCALES WITH CART AND PAD BOX 212500 KIT 475-72582 $144999 KIT H | COMPUTERSCALES® D | E-Z WEIGH KART HYBRID DX2 KART SCALE SCALE SYSTEM - System includes 7\" Android™ tablet (color may vary) with full color - 400 lb (200 kg) pad capacity high-res screen and Computerscales® XLi app pre-installed, storage - 1,600 lb (800 kg) case for tablet / cables and wired 12\" x 12\" x 2.5\" scale pads with system capacity 400 lbs. per pad capacity (set of 4) - Certified to 0.1% accuracy - USB & RS232 output 475-72638 $179999 SET 300-170130 $104500 SET 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 327

TOOLS || Scale and Chassis A | FRONT END $84900 PR A MUST FOR EVERY ALIGNMENT SCALE OWNER TURN PLATES F | LIQUID LEVEL - Heavy duty roller bearings make settings a snap - Quick and easy, - Measures 13” x 15” x 11⁄2” simply fill with fluid - Range from plus or minus 35° swing, - Use for leveling scales can be zeroed with car in place or wheel pads - Correctly turn each wheel 20° - Impact resistant, two without scrubbing the tires 12” containers and 300-7040 12 ft. connecting hose 910-82650 $3399 EA B | ALUMINUM $99999 PR G | ALUMINUM TURN PLATES TURN PLATES - Free floating in 2 directions - Low profile design at .5\" thick eliminates bind - Includes a locking pin to ensure the turn plates stay at zero degrees - Reads to 1/2° - Degrees can be - Engraved in one degree increments to twenty zeroed with the car in place degrees in both directions - Low profile, only 1\" tall - 360 Degree rotation on internal bearings - Can be used on top of scale pads - Large pads measure 14-1/8\" in diameter - Weight capacity - 1500 lbs per plate 475-79800 300-3600 $22399 PR C | SCALE PAD $119500 SET H | LASER CHASSIS LEVELER WITH HEIGHT CHECKER & LASER LEVEL ROLL OFF PAD - Check actual ride height when car is on scales or on a leveler - Designed to fit any 15” - Includes an easy to setup self-leveling beam laser, 4 easy-to-read scale with a 21⁄2” pad thickness targets that are held to the frame with magnets and a separate pad - Enables the car to be rolled off the scale leveling target for leveling the scale pads and establishing pads and back on with little effort the 'ground plane' to measure chassis heights - All aluminum construction - Laser stand includes bracket with knob for major height 300-7050 adjustments or make minor adjustments with the leveling screws on the base plate D | BIRDCAGE - Comes with silver storage case - 113⁄4\" x 71⁄4\" x 53⁄4\" INDEXING TOOL - Target range: 2-6\" or 2-8\" - Birdcage indexing tool greatly 475-72981 1-41⁄2\" CHECKER $32999 EA simplifies tedious process 2-6\" CHECKER - Slip over birdcage bolts and attach angle finder 475-72983 2-8\" CHECKER 32999 EA - Gives an exact angle of the birdcage 475-72985 32999 EA - An invaluable tool for both racers and chassis builders - Choose 1⁄2\", 5⁄8\" or 3⁄4\" based on birdcage bolt size - Angle finder sold separately 800-45012 1⁄2\" INDEXING TOOL $4499 EA 5⁄8\" INDEXING TOOL 800-45058 3⁄4\" INDEXING TOOL 4499 EA 800-45034 4499 EA E | COIL-OVER SHOCK J | IRACEWEIGHTM SET-UP TOOL MODULE - Allows you to simulate the installed - Communicates directly with length of your coilovers, which will your Intercomp RFXTM Wireless Scales give you a finished ride height or Intercomp Cabled - Fits 1⁄2” or 5⁄8” coil-over mounts - Scales with RS232 output - Safely adjusts from 131⁄2” - 21” - View and save live weights, export data to a spreadsheet, or email saved reports 916-36037 $7199 PR - Allows direct communication with scales $34900 EA - For iPhone®, iPod® and iPad® (not included) 300-170250 328 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Scale and Chassis F | SCALE CARTS A | QUIK RAMP SCALE RAMPS WITH ROLL-OFF - 21” x 21” x 35” - Assembly required - 30\"L x 2.5\"H x 12\"W (762x64x305mm) - Scale system not included - 7.8° incline - 12\" (305mm) roll-off area 910-82103 $33499 EA - Solid construction, supports up to a 6,000 lb. (2,721kg) vehicle - Textured exoskeleton provides extra strength and prevents slipping - Set of 4 G | SCALE 300-171005 $26900 SET OF 4 PAD BOX $28699 EA B | SCALE RAMP - Strongest scale pad box around, holds up to 3000 lb. - Low profile ramp for 21⁄2”/64 mm scale pads - Two high-strength latches - 15” x 15” / 380 x 380 mm lightweight aluminum secure your scale pads design complements all scale systems Two handles make carrying 300-7060 your scale pad box a snap - Aluminum/steel corners and edges protect during transport 910-82100 $30500 SET OF 4 H | CHASSIS HEIGHT GAUGE C | SCALE RAMPS - Allows you to preset the desired height and slide gauge under car - High tech foam ramps weigh - Adjust height until frame rail touches end of tape less than 3 lb. and can take a beating 475-78320 SHORT - 24” $14499 EA - Easy to store 475-78325 LONG - 36\" 14499 EA - 12” wide, 14” long and 21⁄2” tall - Set of 4 $18620 SET 236-3000 J | SET-UP BLOCKS D | FRAME HEIGHT “WEDGIE” - Adjustable in 1/4\" increments - Use 6” blocks to square the rearend and 4” blocks to race, - Simple one handed operation on raised rail cars subtract 1” on this set-up on the LH side - Measures 31⁄2” - 71⁄2” - Fits in your pocket PRO BLOCKS 300-8150 $2599 EA 940-82752 940-82754 1.75\" - 4\" $8999 PR 3\" - 6\" 10499 PR Test, Don’t Guess! SET YOUR CHASSIS ANYWHERE K | HYDRAULIC WHEEL E | FRAME HEIGHT TOOLS LOAD CHECKER - Quick and accurate way to measure frame height - Three-piece kit covers from 3” to 7” in 1⁄8” increments - Features heat-treated aircraft aluminum - Also available individually pivoting head, bull’s-eye level and adjustable - Sturdy, steel construction Test, Don’t Guess! stand with quick release pin for height adjustment 300-0010 0-1000 LB. (20 LB. INCREMENTS) $19299 EA 300-8100 KIT $5199 KIT 19299 EA 3” - 43⁄8” 300-0015 0-1500 LB. (20 LB. INCREMENTS) 300-8101 41⁄4” - 55⁄8” 1899 EA $3399 EA 300-8102 55⁄8” - 7” 1899 EA REPLACEMENT LOAD CHECKER GAUGES 300-8103 1599 EA 910-650-LBS SPECIFY 300 - 1500 LB. GAUGE AS NEEDED 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 329

TOOLS || Spring Raters Test, Don’t Guess! Test, Don’t Guess! A | ANGLE FINDER E | HYDRAULIC COIL SPRING RATER - Used for setting pinion angle and critical chassis components (panhard bar, etc.) - Portable design allows you - Magnetic base to check your springs anywhere - Adjustable plate for any height spring 910-89409 $1199 EA - Large, easy to read 4” gauge - Original patented design for guaranteed accurate results - Max length spring 14” B | DIGITAL 300-1000 0-1000 LB. (10 LB. INCREMENTS) UP TO 350# $31299 EA ANGLE GAUGE 31299 EA 300-2000 0-2000 LB. (20 LB. INCREMENTS) UP TO 750# 33299 EA - New digital angle finder 300-3000 0-3000 LB. (50 LB. INCREMENTS) UP TO 1250# 31299 EA reads from 0° to 90° 300-5000 0-5000 LB. (50 LB. INCREMENTS) OVER 1250# in .05° increments $4999 EA - Large backlit LCD display rotates characters 180° REPLACEMENT SPRING RATER GAUGES - Measures 2.25” square, has magnetic base, 910-659-LBS SPECIFY 1000-5000 LB. GAUGE AS NEEDED and uses a 9V battery 910-89429 $6900 EA F |DIGITAL COIL SPRING TESTER C | SUSPENSION LOAD STICK - Digital coil spring tester will read WITH INDICATOR from 0-2000 lb. or 0-5000 lb. - Digital pressure gauge reads in 1 lb.increments - Eliminates cumbersome cables and the digital travel scale reads to .001 lb. - Rate from 1 to 4 corners - Will test up to 6” diameter springs 18” long simultaneously with one RFX® wireless indicator 300-7100 5000 LB. $109500 EA - Quickly determine static load 300-100061 2000 LB. 109500 EA at ride height for each wheel - Ideal where a pull-down rig is not feasible G | COIL-OVER - Non-binding design for precise readings SPRING RATER 910-174000 WIRELESS LOADSTICK $79500 EA - Rates standard coil springs 2.5” to 6” 910-174001 WIRELESS LOADSTICK SET OF 2 119500 EA diameter coil-over setups - Compress coil-over assemblies for easy adjustments - 31” eye to eye height - 105⁄8” jack travel with 12” digital travel indicator - Rate bump stops and determine coil bind and rod pressures - Easy to use handles allow adjustments without tools - 5000 lb. capacity 300-110060 $182000 EA D | LOAD STICK H | PULL BAR RATING ADAPTER - Bolts in place of shock on - Use with Intercomp's coil-over rater 300-110060 a non-coil-over suspension $56499 EA - Accuracy of +/- 0.25% of applied force up to 5,000 lb. - Makes spring changes easy and accurate 70799 EA - Rates pull bars and compression-type traction links - Allows you to pull the suspension down to dynamic - 36\" center-to-center length capacity, attitude to find your compresses loads and check for includes mounts for 3⁄4\" rod ends suspension binds - Maximum travel of 6\" 910-4147 LOAD STICK - 7\" 910-41471 RACHETING LOAD STICK - 7\" 300-110064 ADAPTER ONLY $47021 EA 330 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Alignment Test, Don’t Guess! E | TIE ROD/ FOUR-LINK GAUGE BAR A | BUMPSTEER GAUGE - A simple tool for setting the length of tie rods and radius rods - Fits 1⁄2”, 5⁄8” and 3⁄4” rod ends. 32” long - Precision-ground steel plate, bottle jack with 300-8005 $3999 EA adjustable height and location - Adjustable-height gauges - Slotted mounting holes on plate allow use of 41⁄2”-5”bolt circles without removing rotors - Must be modified for four-lug use - An exclusive design, our bumpsteer gauge features two gauges for fast, accurate readings of degree of toe-in change that occurs as the front suspension moves up and down 910-82700 $17799 EA F | RADIUS $4099 PR ROD TOOLS - For 1⁄2\" rod ends 940-37119 G | TIRE ROLLER B | PRECISION BUMP WITH TAPE STEER GAUGE WITH BILLET PLATE - This tire roll out fixture allows you to check stagger easily and accurately, clean or groove - Most accurate, easiest and quickest way to tires quickly, and check for tire leaks and damage measure your critical bump steer - These tire rollers from Longacre come with a 10 ft. stagger - New precision plate, 3/8\" thick T6 Billet tire tape for added convenience aluminum for the ultimate in accuracy - Anodized and laser engraved 475-50853 $9999 EA - New compact frame - More rigid billet and tube design for the best accuracy - Bright dip anodized - Extended height design - check bump steer at ride height or on stands - Includes new 3⁄8\" thick billet wheel plate with mounting holes for most 5 bolt patterns (41⁄2\" - 5\") and most wide 5 plus 4, 5 & 8 bolt drive flanges, adjustable stand and precision dial indicator - Center hole is 31⁄4\" 1 475-79005 PRECISION BUMP STEER GAUGE WITH BILLET PLATE $43999 EA 2 475-79121 SNAP CAP HUB MOUNTING STAND-OFFS 5999 EA H | TIRE C | STAGGER TAPE $799 EA MARKING PEN - Features thumb locking feature 475-50882 LONGACRE - TIRE MARKING PEN - 10’ long, 1⁄4” wide steel tape 910-82325 SPEEDWAY - TIRE MARKING PEN - Use to measure tire circumference 910-82015 $1099 EA 699 EA J | TIRE $799 EA D | HEAVY DUTY $899 EA MARKING STICK 25-FOOT TAPE MEASURE 475-50880 TIRE MARKING STICK - Huge, easy-to-read 1” wide blade 800.979.0122 7a.m. to 10 p.m. 910-83330 SpeedwayMotors.com 331

TOOLS || Alignment E | BUBBLE CASTER CAMBER Test, Don’t Guess! GAUGE WITH MAGNETIC ADAPTER A | MAGNETIC CASTER - Industry's highest accuracy bubble gauge CAMBER GAUGE - CNC-machined, billet, aluminum housing with easy-to-read bubble display - High-quality billet aluminum - Measures -6 to +6 degrees of camber and -8 to +8 degrees - Measures +8° to -4° caster range, of caster with 0.25 degree accuracy - +6° to -6° camber range - Gauge machined at both ends for easy and 300-102010 MAGNETIC ADAPTER $15900 EA accurate caster settings 300-102042 WIDE-5 ADAPTER 16900 EA - Anodized and laser-etched for easy readings - Equipped with magnetic adapter $13599 EA 910-82605 MAGNETIC CASTER CAMBER GAUGE 6999 EA 475-78405 WIDE 5 ADAPTER F | TOE PLATE - Rest one of these plates against the tire on each side and use a tape measure - Comes with two tape measures 475-7950 DELUXE FRONT END ALIGNMENT KIT $8499 SET 916-02100 23799 KIT B | DIGITAL CASTER CAMBER GAUGE G | TOE PLATE - Reads to 1/10° and as high as needed - Quickly and accurately measure toe - Comes with a Super Magnetic adapter and a padded silver carrying case - High-strength, lightweight, aluminum plates - AccuLevelTM digital readout can be removed and used separately as a - Includes two measuring tapes - Dimensions: 27.5\"\" x 11\"\" (698 x 279mm) digital angle finder for suspension, spoiler angles and many other things - Set of 2 300-102009 475-78290 $31999 EA $9900 SET C | DIGITAL CASTER $36900 EA H | TOE GAUGE $7799 EA CAMBER GAUGE 6499 EA $18999 EA - High-tech aluminum gauge for measuring toe - Will read up to 20° of caster and camber - Eliminates need for tape measure - Reads to the .1°, allowing you to be - Meaures in 1⁄16” increments - 10 times more accurate on your readings - 671⁄2” max width - Includes a storage case and magnetic adapter 300-8000 - Includes standard 9V battery 300-7200 DIGITAL CASTER CAMBER GAUGE 300-1255 WIDE 5 ADAPTER GDTueeossnts’,!t J | CASTER CAMBER GAUGE D | ECONOMY WITH MAGNETIC CASTER/CAMBER ADAPTER GAUGE - Allows you to make accurate front-end caster and - Will read +/-7° and is accurate to 1⁄8° camber adjustments quickly, easily, and accurately - Adjustable magnets attach to your hub 475-78260 - Aluminum construction K | TIRE SCRIBE 910-82610 $4599 EA 910-41472 149999 EA - Use to make line on the tire for toe-in setting - Spring-loaded RATCHETING LOAD/LENGTH STICK 475-7961 $13499 EA 332 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Pullers and Drivers F | UNIVERSAL $699 EA A | WHEEL BEARING PACKER $2999 SET ALIGNMENT SYSTEMS - Quickly packs bearings with new grease while forcing out old grease - New wheel alignment system with 910-89635 lighter weights that stay on the wheel rim easier - Fixed gauge attachment for easier caster, camber and toe G | BEARING RACE adjustments while on the wheel AND SEAL DRIVER - QuickTrick case - Dual side set up frame for caster, camber and toe - Quickly and easily installs wheel bearing - Digital gauge races and seals without destruction - New affixed digital gauge brackets on each frame to race or axle housing - Two tape measures - Set includes six discs to fit common - 6 attachment pins w/Red protector caps bearing sizes: 1.565”, 1.75”, 1.965”, - Allen wrench 2.325”, 2.47” and 2.555” - Instructions 910-89625 910-416405 FITS 13-18\" WHEELS $29999 EA 910-416412 FITS 17-22\" WHEELS 31995 EA H | PITMAN ARM PULLER B | STEERING WHEEL HOLDER AND ALIGNMENT TOOL - Opening size 15⁄16” x 3⁄8” drive square port in center screw allows for use - Makes measurement more accurate with 3⁄8” drive ratchet - Pressing the locking switch can adjust the height with a loaded spring to fit a 910-89630 $1499 EA wide variety of cars or trucks - Smooth hooks prevent damage to J | SEAL PULLER the steering wheel or seat cover - For removal of grease and oil seals $699 EA 910-416474 $5499 EA - Two tip sizes accommodate many applications 910-89620 K | 891 STEERING C | MINI PRECISION WHEEL PULLER KIT BEARING PACKER - Easy to use - Universal fit - Includes all bolts/hardware necessary - Uses 100 gram cartridge of grease 410-5891 STEERING WHEEL PULLER KIT $1499 EA 910-780600 MINI PRECISION BEARING PACKER $7499 EA L | GM LOCK PLATE TOOL 910-10753 ULTRA LOW DRAG WHEEL BEARING GREASE, 100G CARTRIDGE 6499 EA - Compresses the lock plate so D | POWER STEERING PUMP snap ring can be removed AND ALTERNATOR PULLEY PULLER 910-32610 $999 EA - Removes power steering and alternator TIE ROD pulleys on selected applications of GM, Ford and Chrysler with hub sizes of 11⁄8”, 11⁄4”, 15⁄16” or 13⁄8” 910-89637 $1799 EA BALL JOINT M | TIE ROD AND BALL JOINT SEPARATOR E | PLUMB BOB KIT - Square rear end - Break loose tie rods and ball joints - Lots of other uses - Opening size is 21⁄32” for tie rod and 15⁄16” for ball joint 910-89610 TIE ROD $999 EA 475-50820 $3999 EA 910-89600 BALL JOINT 999 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 333

TOOLS || Brake H | 37° TUBE FLARING TOOL A | LEVER TYPE TUBE BENDER - Makes clean, accurate flare every time - Simple and easy to use - 10” handle gives plenty of leverage to make smooth, $10799 EA 910-89520 37° FLARING TOOL $4999 EA professional 5⁄8” radius bends in 3⁄16” stainless or mild steel brake line tubing 910-89527 910-89528 37° FLARING TOOL - MADE IN U.S.A. 10799 EA B | DOUBLE FLARING J | BRAKE SPOON $399 EA BRAKE LINE TOOL $499 EA - Adjusts star-adjuster - Produces high quality double flares and screw-adjuster - For use on 3/16\" steel, nickel, type brakes quickly and copper tube and easily - Lightweight and easy to use 910-83306 - Use on car or bench vise 728-51535 3/16\" DOUBLE FLARING TOOL $3999 EA K | BRAKE SPRING 728-51515 1/4\" DOUBLE FLARING TOOL 3999 EA COMPRESSOR 910-316 8999 EA 910-2502 3/16\" HANDHELD TUBING STRAIGHTENER 9099 EA - For removal and 728-85510 1/4\" HANDHELD TUBING STRAIGHTENER 4499 EA replacement of backing plate springs, cups and pins BRAKE LINE CUTTER 910-83302 C | MINI TUBING BENDER - Bends 1⁄8\", 3⁄16\" and 1⁄4\" tubing up to 90 degrees - Use with brass, copper, steel or aluminum - Compact for limited accessibility applications 728-51503 $1499 EA L | TUBING CUTTER - Great for brake line or aluminum fuel line D | BRAKE 910-89526 $1199 EA SPRING TOOL $499 EA M | FUEL LINE - Easily removes and TUBING BENDER installs brake springs 910-83304 - Will bend 1⁄4”, 5⁄16”, 3⁄8” tubing up to 90 degrees E | 37° TUBE $1499 EA FLARING TOOL 910-83300 - The flaring tool you need to make $10799 EA N | FITTING FIXER the 37° flare so essential to working with AN fittings - Repairs the sealing surface on 37° fittings - Standard brake and fuel lines are flared at 45° - - Utilizes a diamond-dust bonded lapping material which is not compatible with AN hardware - Portable, easy to carry, easy to use - This tool makes a clean, accurate flare every time - Works with a drill (all sizes) or tap handle (sizes -3 to -6) - Works on tubing from 3⁄16” to 5⁄8” - Includes a custom storage case 910-89528 37° FLARING TOOL - MADE IN U.S.A 469-3000-SPECIFY INDIVIDUAL FITTINGS $3822 UP F | HEAVY DUTY RATCHETING 17150 KIT 37° FLARING TOOL 469-3468 COMPLETE SET -3 TO -8 FLARE FIXING KIT - It has a ratcheting feed screw $15599 EA that has a hardened flaring cone supported by needle bearings - Will put a 37° flare in 3⁄16”, 1⁄4”, 5⁄16”, 3⁄8”, 1⁄2”, 5⁄8” and 3⁄4” tubing - Works great flaring 3⁄16” stainless steel brake line 910-89524 G | 45° DEGREE DOUBLE P | SURE SEAT FLARING TOOL LAPPING TOOL - Allows you to lap-in flared tubing to eliminate leaks in fuel and brake line joints - This tool makes 45° flares only 469-3700 37° TOOL $5880 EA - For 3⁄16”, 1⁄4” 5⁄16”, 3⁄8”, 1⁄2” 45° TOOL 469-4500 DELUXE KIT WITH 37° AND 45° TOOL 5880 EA 910-89525 $3899 EA 469-5100 14700 EA 334 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Engine Storage S/B FORD S/B CHEVY F | ENGINE LIFT HANDLES - Allows for a smoother lifting process for those times when a cherry A | ENGINE STORAGE STANDS picker isn't practical - Lightweight, high-strength polymer - Allows installation of drives, pulleys and clutches - 41⁄4\" long handle - S/B Chevy stand is powder coated red - Set of 4 - S/B Ford stand is painted blue - Includs 3⁄8\"-16 hardware 916-81200 S/B CHEVY 910-81220 ENGINE LIFT HANDLES $4099 EA 910-81199 S/B FORD $4299 EA 4599 EA S/B FORD S/B CHEVY G | SPRINT CAR B | ENGINE ENGINE STAND STORAGE STANDS - 1” diameter plated tube - Bolts to the back of block and off - Light, compact and priced so low anyone can afford them of the front motor plate - You can even leave the tranny attached - Add the wheel kit to make it mobile 910-89228 STAND $7399 EA - 2-piece design $5399 EA 546-185 MOTOR PLATE 6999 EA 910-81101 S/B CHEVY 5599 EA 910-81137 LS1 CHEVY 4799 EA 910-81102 S/B FORD 5199 SET 910-81139 SET OF FOUR CASTERS 10099 EA 916-02000 SBC ROLLING ENGINE STAND 11299 EA 910-81149 LS ROLLING ENGINE STAND 9499 EA 916-02001 SBF ROLLING ENGINE STAND H | SPRINT CAR C | PORTABLE ENGINE STANDS ENGINE STAND - 360° engine rotation - This engine stand is perfect to store your - Assembles and disassembles easily engine in the off season or for your spare - No welding required - 2” casters for easy transport - Heavy duty steel wheels - Fits either standard or lightweight blocks 1 910-81003 1000 LB. - 3 LEG $9999 EA 2 910-81002 1500 LB. - 4 LEG 15399 EA 940-81106 $26099 EA D | ENGINE STAND AXLE ADAPTER - Axle can be rotated 360° - Easy to mount and adjust - Inspect or service rear gears, wheel bearings - and brakes without being on the ground J | ENGINE STAND 910-98084 $6099 EA DRIP TRAY E | CHEVY V8 - Helps keep your shop floor clean ROLLING ENGINE CRADLE during engine disassembly - Made from a durable black plastic and - Fits Small and Big block Chevy motors designed to fit most three and four leg mounting on the rear lower bellhousing engine stands dowels/bolts and side engine mount locations - Big enough to catch debris from a big block, small enough to stay out of your way 458-7200 $9499 EA 916-81209 $6399 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 335

TOOLS || Engine Storage DELUXE STANDARD F | ENGINE SEAL KIT - Kit of aluminum plates designed to block off all openings in - S/B Chevy long block - Great for engine storage A | ENGINE 910-81607 STANDARD $1799 KIT LIFT PLATES $799 KIT - Deluxe model is designed to allow 699 KIT complete adjustability without the need G | ECONOMY for clumsy hooks BLOCK-OFF KIT - Simply slide the chain through to the desired length and slide the link into the slot - This economy plastic kit - There is also a heart-shaped hole to allow use of a hook covers the exhaust ports and distributor hole - Standard model features four holes that allow for compensation for engine tilt 458-73001 S/B CHEVY 458-73002 B/B CHEVY - Both models incorporate the standard Holley 2 and 4 bbl. H | DELUXE and Rochester bolt patterns ENGINE LEVELER 910-89431 DELUXE MODEL $2299 EA - 3⁄4”-ton engine leveler 910-89430 STANDARD MODEL 1699 EA includes a crank handle to allow faster leveling and B | LS ENGINE a chain link for the hook LIFT PLATE - Chrome plated lift plate allows you to safely and 910-89445 $6999 EA precisely install or remove 940-11645 ENGINE LIFT SLING 2999 EA your LSx by its valley - Fits all Gen III and IV GM J | ENGINE CRATES - Crates fit most S/B Chevy motors '97 and newer and Ford engines 916-10100 LIFT PLATE $5571 EA - 40\" Long x 27\" Wide x 35\" High - Manufactured from tough LLDPE Polyethylene C | ENGINE LEVELER - Crates fit both 360 and 410 Ford engines - Fully adjustable threaded 940-5116 410 CRATE (SHOWN) $29099 EA rod allows you to tilt 940-5108 360 CRATE 30699 EA engine as needed - Includes chains with three mounting holes per end $4499 EA K | ENGINE BAG 910-89440 - Cover for spare engine D | ENGINE - Made from a water repellent LIFT CHAIN heavy duty Denier nylon - Has sturdy drawstring at bottom to - 24” of heavy duty 1000 lb. secure cover to stand load chain 564-EB1000 PURPLE $6999 EA 910-89435 $799 EA 564-11000 BLACK 6999 EA E | ENGINE CLEANING BRUSH KIT L | LS ENGINE HARMONIC BALANCER - Kit includes 12 brushes in sizes from INSTALL AND CRANKSHAFT - 1⁄4” diameter to 5” diameter HOLDING TOOL 545-61820 - Simply bolt it to the back of the crank and position the tool to align a bellhousing bolt within the slot in the handle - Without the bellhousing bolt in place, this tool also aids in crank rotation $3999 KIT 910-42511 $3599 EA 336 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Engine Assembly J | DIAL INDICATOR STAND E | DIAL A | CAMSHAFT INDICATOR DIAL INDICATOR - Spans cylinder bores up to 47⁄16” and makes it easy to check piston - 23⁄8” diameter face, - This style of dial indicator fits in either dome and deck height measures in .001” .842” GM or .875” Ford lifter bores - Can also be used to check flatness increments - Reads in .001” increments runout, warping, etc. - 1” of travel - Dial indicator not included - Probe has 1” stroke - Includes bracket on the back 545-62050 $4299 EA 910-82721 $2099 EA 586-66838 $9099 EA K | TOP DEAD F | CAM DIAL CENTER INDICATOR INDICATOR STAND - Positive stop to locate top dead center - A must for cam checking with heads on - Simply screws into either a 7⁄16” or 1⁄2” head - For 14mm thread bolt hole and allows you to check cam specs - 1” travel dial indicator reads in .001” 550-3410 $799 EA increments and mounts to an adjustable stand 586-66830 $7899 EA B | BUDGET DEGREE WHEEL KIT - Includes 9° wheel, pointer, piston stop, dial indicator, stand, two light valve springs and instructions, all in a foam-lined carrying case 910-81132 $13499 KIT L | SOFT JAW PADS G | S/B CHEVY C | DEGREE WHEEL CRANK NUT CRANK SOCKET - Fastens to vise jaws with 3 strong magnets - Two-piece assembly that allows you to - Non-Marring material prevents turn your engine in either direction using - Broached keyway allows 1⁄2” socket clamp marks, scratching, and other a large diameter socket to slide over crank snout and key damage to finished surfaces - Heavy-duty and hear-treated - Giant knurled jam nut positions - Available in 4\" or 6\" sizes - Provides a secure method of attachment degree wheel - Sold as a pair for the harmonic damper and other parts - For S/B or B/B Chevy - S/B socket fits V8, 90° V6 Chevy 728-22019 4\" $1499 PR and Super Duty Pontiac 4 cylinder 728-22020 6\" 1499 PR - Use with 11” degree wheel (545-62190) 282-320 $4595 EA 545-61755 S/B CHEVY $3099 EA 545-61756 B/B CHEVY 8299 EA M | HEAVY DUTY H | CONNECTING D | HEAVY DUTY CONNECTING ROD VISE PISTON INSTALLER ROD SEPARATOR - Can be mounted permanently - This nylon tool allows easy - Fits in your bench vise or in your bench vise piston installation without - Works with new or reconditioned rods - Holds rod without damaging damaging parts - It is almost impossible to get the rod cap - Weighs in at almost 2 lb. and is shot filled off a rod without a tool like this 586-66769 SPEEDWAY $12299 EA 728-51363 TITAN 8999 EA 586-66773 $14699 EA 586-67571 $6099 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 337

TOOLS || Engine Assembly G | DIGITAL ENGINE BALANCER A | ROD $15099 EA BALANCING STAND - Allows you to quickly and $8799 EA accurately weigh pistons, - Rod weight fixture for determining rods, valves and other bob weights and matching internal engine components rod end weights - 2000 gm./70oz. capacity, - With bearing-mounted arms 1gm./1oz. graduation, - All aluminum construction zero adjustment (Scale not included) - 9V battery operation, AC adapter included 910-81605 $26799 EA 910-81601 B | ROD BOLT $7199 EA LENGTH CHECKER H | ECONOMY ENGINE SCALE - The correct way to install rod bolts is to measure - Back light display their stretch with this - Auto off: 60 seconds easy-to-use tool - 4\" x 4\" platform 910-81606 - Two clear containment bowls - Tare range: Tare full capacity - Calibration: Auto calibration - Power: 2 AAA batteries (included) - Weighing units: G. OZ, OZT, DWT, CT, GN 910-81602 C | CUBIC INCH TESTER J | HARMONIC BALANCER PULLER AND INSTALLER - Use to determine correct displacement when restrictions apply - Accuracy to .5% - Installs and removes engine balancer - Includes glass tube, thermometer, plug adapter, instructions and - Features a needle bearing center and accessories in a hardwood box adapter to fit all U.S. engines - Up to 672 ci 910-81600 $9499 EA 550-3200 $114499 EA D | DUAL GAUGE K | BARREL VALVE LEAKDOWN TESTER SETTING TOOL - Detects ring seat failure, bent valves, - Set your barrel valves cracked head, and leaking gaskets quickly and accurately - Works best with 100-plus psi air source - Includes hose with a #6 AN fitting - Sets barrel valve on fuel injection and dual gauges for accuracy without engine running 475-73016 $14499 EA 913-81121 DUAL GAUGE LEAKDOWN TESTER 913-81123 BARREL VALVE HOSE AN 6 $8399 EA 2599 EA E | SINGLE L | ENGINE LEAK GAUGE TESTER DOWN TESTER - Works with 80 psi of air - Checks ring seals, valves, even head gaskets pressure through 1⁄4” air line 913-81101 SINGLE GAUGE LEAKDOWN TESTER 475-73010 $15499 EA 913-81123 BARREL VALVE HOSE AN 6 $5999 EA F | 32” LONG 2599 EA STRAIGHT EDGE M | DIGITAL ENGINE - Used to check for straightness on blocks and heads LEAK DOWN TESTER - 32” long and accurate to .001” 577-620 - Checks ring seals, valves, even head gaskets 338 SpeedwayMotors.com $9699 EA 475-73014 $29999 EA SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Timing G | SELF-POWERED A | SELF-POWERED TIMING LIGHT TIMING LIGHT - Runs on six AAA batteries - Works well with all ignition systems instead of 12V power, which - Powered by 2 D cell batteries means you can check your timing quickly and easily $28995 EA 1 610-1754 $6999 EA 547-8991 B | TIMING LIGHT H | DIGITAL ADVANCE TIMING LIGHT - Built using solid state circuitry and uses a unique SCR (silicon controlled rectifier) that provides accurate and stable timing signals - Super bright xenon flash, from 0 to 8000 rpm and a high Vis LED display - A 6 ft. lead with a heavy duty inductive metal pickup can - Designed for precise tuning be attached to the spark plug wire in any direction and diagnostic work - Can be used on all engines with standard or capacitive discharge - Pushbutton control to adjust advance ignition systems and switch between 4 and 2 cycle engines - Tough ABS shell 2 547-8990 $21795 EA - Works with 12 volt systems 910-80587 $5299 EA C | SELF-POWERED TIMING LIGHT J | LSM VALVE SPRING ON HEAD - Check timing, help diagnose REMOVAL TOOL no-spark conditions and check for electronic advance/set back - Tactical-Style design for easy grip and under - For 7⁄16” studs hood work 5.125\" length x 1.75\" head diameter - 3⁄8” adaptor available - Weight: 9.92 oz. 586-67419 SELF-POWERED VIA RECHARGEABLE LITHIUM-ION BATTERY $7099 EA 4499 EA 910-67414 SELF-POWERED W/BATTERIES ( 2 D-SIZE) D | ORANGE 1 910-81150 VALVE SPRING TOOL $22599 EA THERMAL SLEEVE 2 910-81151 7⁄16\" TO 3⁄8\" ADAPTER 1399 EA - Silicone coated fiberglass sleeve - 500°F continuous, 2000°F short duration K | LSM BENCH - Great for wires, cables and lines VALVE SPRING - Available in 3', 6' and 10' TESTER 704-00-075 3⁄4” I.D. $799 FT - 600 lbs. or 1000 lbs. model 1” I.D. - 10 lbs. increments 704-00-100 2” I.D. 999 FT - Up to 1.750” od springs 704-00-200 1599 FT 910-81152 600 LBS. $43999 EA 910-81153 1000 LBS. 43999 EA L | HI-TEMP SILICONE COATING E | ALUMINIZED HEAT SHIELD SPRAY FOR EXHAUST WRAP - Protection from abrasions, oil & grime - Two sheets of 99.5% pure grade industrial aluminum - Heat protection up to 1500°F laminated to 3/8” fiber tech padding to achieve highest - For use on exhaust wraps, engine blocks, pipes, reflection of radiant heat and sound deadening manifolds and more - Sold in 4’ x 6’ sheets 356-010302 SILVER 1099 EA 910-80250 SINGLE-SIDED ALUMINUM $3299 EA 910-80249 TWO-SIDED ALUMINUM 3899 EA ADHESIVE SPRAY 910-58010 1099 EA M | HEAT F | ALUMINIZED REFLECTIVE TAPE LINE SLEEVING - For firewalls, bulkheads, engine covers, - Capable of withstanding floors, seat bottoms and more 500°F direct / 2000°F radiant heat - Trim to desired length 356-10393 GOLD - 24\" X 24\" - TEMPERATURES UP TO 850° $4999 EA 1 356-10418 HEAT SHEATH SEWN - ALUMINIZED, 1⁄2\" X 36\" $1299 EA 356-010460 1099 EA 356-10419 HEAT SHEATH SEWN - ALUMINIZED, 1\" X 36\" 1699 EA 356-010460 SILVER - 12\" X 12\" - TEMPERATURES UP TO 400° 1099 EA 356-10403 HEAT SHEATH SEWN - ALUMINIZED, 3⁄4\" X 36\" 1199 EA SILVER - 12\" X 24\" - TEMPERATURES UP TO 400° 2 356-10405 HEAT SHROUD VELCRO - ALUMINIZED, 1\" X 36\" 2899 EA 356-10487 HEAT SHROUD VELCRO - ALUMINIZED, 1\" TO 2.5\" X 36\" 3499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 339

TOOLS || Valve Train A | VALVE LASH G | UNIVERSAL P | CAM WRENCH SETS VALVE LASH BEARING DRIVER ADJUSTING TOOL - Accurately adjust - Remove and replace your S/B Chevy your 9⁄16” or 5⁄8” - Adjusts ALL shaft and stud mount rocker and 90° V6 cam bearings without rocker nuts systems on the market today damage to the bearings 910-81147 $7599 EA 910-81123 7⁄16” WRENCH, 1⁄8” T-WRENCH $2799 SET H | VALVE SPRING 910-81124 1⁄2” WRENCH, 1⁄8” 2799 SET COMPRESSOR 913-81102 $3999 EA 910-81127 AND 3⁄16” T-WRENCHES 2799 SET 910-81128 9⁄16” WRENCH, 3⁄16” 3099 SET - Screws on to 3⁄8” AND 7⁄32” T-WRENCHES and 7⁄16” rocker studs 5⁄8” WRENCH, 3⁄16” AND 7⁄32” T-WRENCHES - Locks into the down position so you can work with both hands B | VALVE LASH 910-81130 $6099 KIT Q | SPARK PLUG TORQUE STORAGE BOX WRENCH $19499 EA J | S/B $1399 EA CHEVY - Spark Plug Storage Box - T-handle valve VALVE - Fits up to 8 Spark Plugs wrench with a built SPRING - Tip of plug to hex cannot be in torque wrench COMPRESSOR any longer than 1.25\" 910-81122 910-81564 - Works with Jesel or T&D-style shaft-mount rockers - Removes springs with heads on C | BEAM 910-81135 COMPRESSOR $22599 EA TYPE 910-81144 SPEED HANDLE 4999 EA TORQUE WRENCHES K | JESEL R | CAM AND AND T&D LIFTER ORGANIZER TRAY - Works with right and VALVE left hand thread fasteners SPRING TOOL - This storage box keeps your lifters in order - Minimum fatigue over the lifetime and the snap-on lid keeps everything clean of the tool, insuring better accuracy - For use with - High-impact plastic, 231⁄2” x 21⁄8” deep standard Jesel rockers - Allows you to remove 251-4390 STANDARD CAM AND LIFTER $2199 EA LH or RH valve springs 728-23140 1⁄4\" - 0-80 IN./LBS. $1999 EA 910-81062 251-4391 ROLLER CAMSHAFT AND 5099 EA 3⁄8\" - 0-800 IN./LBS. ROLLER LIFTERS 728-23141 1⁄2\" - 0-150 FT./LBS. 2499 EA 728-23142 2899 EA $14699 EA D | LED POCKET L | DUAL S | VALVE PEN FLASHLIGHT FEELER TRAIN WITH BELT HOLSTER CLIP GAUGE HOLDER ORGANIZER TRAY - Aluminum feeler gauge holder - 231⁄4” x 123⁄8” x 15⁄8” - Holds two sets of feeler 251-4394 gauges on the same handle - Super-bright 1 watt high-flux L.E.D. 910-81133 SHORT $3799 EA $5099 EA 910-81143 LONG 4399 EA 728-36006 $1999 EA E | VALVE M | CHEVY T | STUD REMOVER LASH CAMSHAFT AND TAP ALIGNMENT FEELER INSTALL TOOL GAUGES - Allows removal of stock press-in - This tool bolts on the end of the cam studs and aligns the tap (7⁄16” - 14) - Features 3” blades and gives you the control to do the job right to simplify the installation of with a .002” step for setting valve lash - Works great for taking the cam out too screw-in rocker studs 910-81136 $799 EA 586-66897 $3399 EA 910-81131 $2099 KIT F | LS SPRING N | HEAVY U | RACING REMOVAL TOOL DUTY NUT SPLITTER VALVE SPRING REMOVAL TOOL - Mounts directly to factory - Removes rusted, stripped, and stubborn stands on LS1-LS6 using nuts and has a self-centering wobble tip - Makes changing valve specifically engineered adaptor springs a fast and simple - Mounts directly to LS7 head one-person job 910-81146 $23999 EA 910-89432 $1399 EA 910-81154 $22499 EA 340 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Valve Train M | PRECISION F | VALVE SPRING A | HYDRAULIC STAINLESS PRESSURE TESTER VALVE SPRING STEEL CALIPERS CHECKER - Test tension up to 300 lb. - Stainless steel calipers come with a quickly and accurately - Made from billet padded storage box - Mounts directly on rocker arm aluminum with - Allows measurements of .001” - Calibrated to within 3% steel inserts for - For use with many years of use 910-89425 DIAL - 6” $2999 EA aluminum rockers only - Special roller tip end $25899 EA and steel guides 545-62390 $10699 EA will work with most rocker arms 910-81134 N | ENGINE G | DIGITAL B | VALVE COMPRESSION VALVE SPRING TESTER TESTER SPRING TESTER - Black anodized aluminum - Check for bent or leaking valves, - Ideal for checking valve spring - Most convenient valve spring bad ring seal, even leaking head gaskets on an assembled motor tester on the market - Easily detects broken or - Set spring height once and test 475-73010 $15499 EA fatigued springs as many springs as you - 0-500 lb. in 5 lb. increments want, with little effort - Handles up to 600 lb. springs 910-81060 $57900 EA H | VALVE 916-81150 $20299 EA SPRING GAUGE P | COMPRESSION C | RIMAC BENCH TEST KIT GAUGE - Measures tension of MOUNT BIG BLUE valve springs SPRING TESTER - Standard gauge - Use in a vise, or under the 910-89448 quill of a drill press - 1000 lb. capacity and - 0-600 psi reads in 5 lb. increments - The industry standard 913-81103 $5799 EA when it comes to valve spring testing tools $7899 EA 586-1000 1000 LB. CAPACITY J | PUSHROD $92499 EA LENGTH Q | COMPRESSION CHECKER TEST KIT GAUGE - For small block Chevy - Digital gauge - Just slip it over the rocker arm stud 910-89449 to instantly tell how much longer (or shorter) the pushrod needs to be 505-42137 3⁄8” $1799 EA 505-42132 7⁄16” 1799 EA $9899 EA D | PUSHROD LENGTH TOOL K | 1⁄4\" TO 7⁄16\" - 5⁄16” diameter and fit several engines STUD REMOVER KIT - Sold per pair - Set allows you to remove 1⁄4”, 5⁄16”, 3⁄8” 287-99720 6.125”-7.5” 289-302 FORD, $3099 PR and 7⁄16” studs without damaging threads S/B CHEVY WITH HYD. ROLLER 910-89413 $3499 SET 287-99721 7.5”-8.7” S/B CHEVY, B/B 3199 PR CHEVY INTAKE, 351W FORD 3099 PR R | VALVE SPRING HEIGHT CHECKER 287-99722 8.5”-9.8” B/B CHEVY EXHAUST, 351M-400 AND 460 FORD - Precise measuring device for checking the installed height of valve springs 910-81125 SHORT: 1.400”-1.800” $6099 EA E | 7” OR 11” 910-81126 TALL: 1.600”-2.100” 6599 EA DEGREE WHEELS S | VALVE L | 16” PROFESSIONAL HEIGHT DEGREE WHEEL - Heavy gauge CHECK aluminum SPRINGS - The bigger the degree wheel, the more discs calibrated accurate the cam timing can be dialed in in 1° increments for determining precise - A pair of light weight - This 16” degree wheel is made of blue valve, cam and ignition timing spring help you get the installed anodized aluminum with easy to read height of valves correc white letters 450-7DW 7” DEGREE WHEEL $3299 EA 910-81129 $999 PR 586-67490 $23899 EA 545-62190 11” DEGREE WHEEL 4299 EA 545-61755 11” SBC CRANK SOCKET 3099 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 341

TOOLS || Shop A | 50 FT. AIR HOSE H | 45-PIECE STUBBY AND REEL DRIVER SET - 50 ft. of 3⁄8” air hose with 1⁄4” NPT - Includes an adjustable ends on a steel reel with crank wrench,ratchet with both 1⁄4” and - Mounts to the ceiling, floor, 3⁄8” drive, ratcheting screwdriver, wall or trailer screwdriver bits and both metric and SAE sockets 910-81019 $2799 SET 910-83210 $4499 EA B | LUCAS AIR 910-3800 TOOL LUBRICANT RAPIDAIR - Extends tool life - Protects under extreme operating temperatures - Disperses water - Resists blowout 484-102161 16 OZ $799 EA Complete line of components and accessories online! J | AIRLINE KITS - Operating pressure: 175psi at 70° F / 140psi at 140° F C | 10 PIECE T-HANDLE - Meets OSHA guidelines WRENCH SET - Temperature range: -40° F to 140° F - Compatible with common compressor oils - Includes 3⁄32”-3⁄8” wrenches and stand - 100' length 910-81006 $1499 SET 910-7500 3⁄4\" LINE KIT $23099 KIT 1⁄2\" LINE KIT 910-3800 3⁄8\" LINE KIT 19799 KIT 910-90500 9899 KIT D | TERMINAL $699 EA K | SEVEN-PIECE $799 SET BLOCKS CHISEL SET 799 EA 910-64005 4 TERMINALS 899 EA 910-81034 910-64006 8 TERMINALS 910-64007 10 TERMINALS L | 285 PIECE ELECTRICAL E | INTERNAL / EXTERNAL REPAIR KIT SNAP RING PLIERS - Includes wire stripper/ - These pliers work for either internal or crimper, wire ties, test light, external snap rings black tape, screwdrivers, - Include two sets of straight tips, fuses, test leads and an one 45° and one 90° assortment of terminals 910-89433 $999 EA 910-68200 $2099 EA F | LOCK M | WIRING ACCESSORIES RING PLIERS 1 FORK SPADES SIZE GAUGE PRICE CONNECTORS 910-55666 6-32 BLUE 16-14 $1199 100/BOX 4 FULLY INSULATED MALE - Lock ring pliers 910-55672 WORKS WITH 16-14 $1399 100/BOX are essential for $999 EA 910-55674 6-32 YELLOW 12-10 1599 100/BOX transmission repairs $3899 EA GAUGE WIRE 910-89436 2 BULLET CONNECTORS STYLE GAUGE PRICE 5 FULLY INSULATED 1399 100/BOX G | MIZE WIRE 910-55670 910-55673 FEMALE WORKS WITH STRIPPERS 910-55671 MALE 16-14 $1099 100/BOX FEMALE 16-14 1099 100/BOX 16-14 GAUGE WIRE - This automatic wire 3 BUTT stripper is designed CONNECTORS COLOR GAUGE PRICE N | VINYL EYELET TERMINALS to holdthe wire and 910-55667 strip the insulation without 910-55668 BLUE 16-14 $799 100/BOX 6 PART # SIZE GAUGE PRICE stretching the wire 910-55669 100/BOX 910-55516 5⁄16” HOLE 12-10 $2199 100/BOX 910-64113 YELLOW 12-10 1299 100/BOX 910-55538 3⁄8” HOLE 12-10 2199 100/BOX 342 SpeedwayMotors.com RED 22-16 899 SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Shop G | KLEVER INNOVATIONS A | SAFETY WIRE TWISTER TOOLS BOLT DIP AND BRUSH - Precision-made for quick wiring - High purity anti-seize and lubricant - Clamp jaws over wire end, pull knurled twister - More efficient: Bolt dip features tested and proven - Positive locking spring-loaded handles 80% time savings versus brushing, saving you time and money - Less waste: 50% less material (anti-seize/lubricant) used 910-16011 $2599 EA H | EXTENDED 910-89404 6” LONG $2299 EA SPARK PLUG SOCKET 910-89405 9” LONG 3199 EA - 5” long socket allows you to easily $899 EA B | STAINLESS SAFETY WIRE install and remove 5⁄8” hex spark plugs without burning your fingers on the headers - 304 stainless steel safety wire - Knurled for added grip - Sold in 1 lb. rolls - 3⁄8” drive - Handy belt clip 910-81580 - Do not reuse safety wire J | SPARK PLUG 910-89406 .025” (3⁄8” BOLTS AND SMALLER) $1499 EA THREAD CHASER 910-89407 .032” (3⁄8” BOLTS AND LARGER) 1499 EA - 14mm and 18mm 910-81565 $1199 EA K | FLEX PICKUP TOOL C | SAFETY WIRE PLIERS $3999 EA - 24\" overall length - Positive locking handle - Quickly and neatly twists wire 728-11162 CLAW PICKUP TOOL $1899 EA - A must for high vibration locations 728-11163 MAGNETIC PICKUP TOOL 1899 EA 475-22598 L | STUBBY D | SAFETY WIRE $2499 EA ADJUSTABLE WRENCH - 1 lb roll contains 362' of .032 stainless steel wire - 4” adjustable wrench $799 EA 475-22599 - Opens up to over 1”, allowing it to fit the most common fitting sizes 910-89820 M | HEAVY DUTY E | SAFETY WIRE 25-FOOT TAPE DRILL FIXTURE MEASURE - Aluminum fixture accommodates - Huge, easy-to-read 1” wide blade 3⁄16”, 1⁄4”, 5⁄16” 3⁄8”, 7⁄16”, 1⁄2” and 5⁄8” diameter bolts - Includes two case hardened threaded bushings and 910-83330 $899 EA two 1⁄16” cobolt steel high speed bits 910-89452 N | DISTRIBUTOR $5699 EA HOLD DOWN WRENCH - Contains two offset box wrenches, size 1⁄2” and 9⁄16” - Use tool by itself or turn with 3⁄8” ratchet 910-81045 $699 PR P | 120V LED DROP LIGHT F | LED WORK LIGHT - All the durability of a traditional drop light - 180 Watts of White Light in an 8-Watt lamp with the efficiency of LED technology - Circuitry that prevents failed LED - Produces over 1000 lumens of bright white light chips from affecting others - Impact resistant handle with - No heat – no more burns to skin, carpet or upholstery non-slip rubber grip - Rubber washer adds to shock and water resistance - Powder coated metal lamp shield with - Super tough poly-carbon housing protects lamp swivel hang hook - Rated for 35 times the life of an incandescent bulb - 25ft 18GA grounded cord with built-in - Swivel hook lets you turn the light in the direction you need it 120V outlet (500W MAX) 910-81065 LED WORK LIGHT $4499 EA 910-2237 $2999 EA 910-81012 WORK LIGHT CORD AND SOCKET 2499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 343

TOOLS || Shop A | PIT MAT G | TRACK MAT $2299 EA N | BLACK FOAM $4999 EA $10999 EA RUBBER MAT - Made of easy-to-clean, - Vinyl mat is padded black vinyl on both sides 23” x 50” and - 481/2\" x 32\" x 11/2\" - Black and blue measure olds in quarters - Grease and oil resistant 50” x 33.5”, red is 47” x 34” for easy storage 910-49321 - Red, blue, or black 910-78300-COLOR $4399 EA 910-78310-COLOR 23” X 50” B | ROLLING H | THE P | 1” CARBON SCRAPER MECHANIC SEAT BONE-STER WITH BOLSTERED HANDLE CREEPER - Flip top tool chest with two - Chrome vanadium construction ball bearing sliding drawers - Features 3\" lifetime - 1” wide scraper blade - Provide a total of 572 cubic warranty tires - Comfortable trilobular handle inches of storage - Molded in strengthening for maximum grip - Supports up to 350 lbs ribs also provide ventilation 910-8502 and built-in handles 728-12462 $999 EA - 43\" long, 233⁄8\" wide 910-81903 $8499 EA Q | TELESCOPING MAGNETIC PICK-UP TOOL C | DECAL J | PADDED CREEPER PACK - Powerful 3 lb. magnet - 40\" with 6 casters - Shielded sides for targeted pickups - Telescopes from 51/2” to 217/8” - Comfortable textured cushion grip 728-11763 $299 EA - Six pairs of decals to dress up your race 910-850050 $4599 EA car, garage wall, trailer, etc - Decal pack may vary from photo R | 3/8\" STUD K | 180 EXTRACTOR 910-78002 $599 PG DEGREE - Fits 1⁄4” to 1⁄2” (6-12mm) studs TUBING - Impact gun compatible BENDER 728-16023 $1999 EA - Makes short, smooth radius bends up to 180 degrees - Calibration gauge to indicate angle of bend D | CAMO UTILITY BLANKET - For copper, aluminum and thin wall tubing S | AC FIN - 72” X 80” COMB - Shell is made of non-woven - 3⁄8” maximum bending capacity synthetic fibers - For 1⁄4”, 5⁄16”, 3⁄8” O.D. tubing - Cleans and 728-22017 straightens condenser $1499 EA 728-11489 $1999 EA and evaporator fins - 6-sided head for 8, 9, 10, 12, 14 and 15 E | ORGANIZER L | TUBE fins-per-inch applications TRAY BENDING PLIERS 728-51500 $999 EA - Clear lid for easy identification $399 EA - Bends copper, brass 728-21267 4 COMPARTMENT 799 EA and other soft thin wall tubing 728-21268 9 COMPARTMENT - For 3⁄16”, 1⁄4”, 5⁄16” and 3⁄8” O.D. tubing 728-11488 $1499 EA F | ADJUSTABLE M | MAGNETIC PARTS TRAY SEAT - Stainless steel dish - Adjusts up and down - Perfect for holding small parts, hardware and fasteners in place - Tools can sit on - Sticks to any ferrous metal surface - it even works upside down bottom tray - Rubber covered magnetic base prevents scratching - Supported by five casters $4599 EA 910-89538 6\" X 14\" 1399 EA 910-83221 910-89539 101⁄2\" X 111⁄2\" 1699 EA 344 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Shop H | 11\" HOSE E | EXTERNAL A | 560 HORIZON GRIP PLIER SET DEBURRING TOOL BOOST MAX BATTERY JUMP STARTER - Comes With 3 different size of pliers - Quickly repairs damaged threads for small, medium, and large hoses from 5⁄16\" to 7⁄8\" (8-22mm) - Starts up to 9.6L gas engines - Long pliers allow to get in the tight - Hardened HRC 60 steel blades and 7.0L diesel engines areas not usually accessible remove burrs and uneven ridges - 2,500 peak amps from threaded rods, pipes, and more 728-60776 $1699 EA 728-51950 $3999 EA 910-560 560 JUMP STARTER $13599 EA J | 90° ANGLED F | EASY OUT B | 540 HOSE LINE CLAMPS SCREW EXTRACTOR MICRO BOOST BATTERY - 3 Different size of clamps to - 5 piece multi-fluted machined JUMP STARTER cover various sizes of hose alloy steel screw extractor - Locking feature - Remove broken screws easily - For use on virtually all V6 - Metal storage box included gas powered engines - 500 amp max charge 728-51769 $1499 EA 728-16013 $1499 EA 910-540 540 MICRO JUMP STARTER $5499 EA L | 11\" PLIER SET G | SELF ADJUSTING C | 2.4\" LCD WIRE STRIPPER INSPECTION CAMERA - 5-piece set - Long reach design allowing for greater - Cuts and strip solid or access in tight hard to reach areas stranded 12-22 gauge wire - Automatically adjusts to wire size 728-60769 $3299 EA 728-11469 $1499 EA 910-50045 $9799 EA D | SOLAR POWERED AUTO DARKENING WELDING HELMET 1 728-41265 STARS & STRIPES $7499 EA 2 728-41266 FLAME 7499 EA 3 728-41267 RED/SILVER 7499 EA 4 728-41282 SKULL/PISTOL 7499 EA 5 728-41283 SKULL/WRENCH 7499 EA 6 728-41288 WORKING GIRL 7499 EA CLEAR PROTECTIVE LENS 399 EA 728-41264 SpeedwayMotors.com 345 800.979.0122 7a.m. to 10 p.m.

TOOLS || Shop A | AVIATION SNIPS G | FASTPIPE COMPRESSED - Compound leverage cutters AIR PIPING - Chrome molybdenum steel construction SYSTEM - Induction hardened, serrated edged blades - Rubber grips for user comfort FastPipe is today’s - Cuts cold rolled and stainless steel improved compressed air piping method with fast 728-11460 STRAIGHT CUT $1099 EA installation time. Fast pipe RIGHT CUT is energyefficient with 728-11461 LEFT CUT 1099 EA superior air quality. 728-11462 1099 EA - Aluminum alloy pipe B | DIGITAL $1799 EA - Polymer compression fittings CIRCUIT $1199 SET - Lightweight, easy install TESTER - Corrosion-free - Smooth inner surface is more efficient - Digital circuit tester - Modify/change system ANYTIME, even after install - Highly accurate and easy to use - 190 PSI, Sizes: ¾\" outside diameter 728-11436 - Pipe lengths 19 ft 8 in, and 8 ft 6 in C | IMPACT SOCKET Individual components available at speedwaymotors.com ADAPTER SET 90' MASTER KIT ¾\" - 6 Piece set - 12 - 81⁄2' pipes - 2 - “T”s - Impact grade - 20 - pipe clips - 1 - ¾” threaded nipple x ¾”npt - Detent ball for secure socket retention - 1⁄4\" shank 728-12087 - 7 - unions - 3 - wall outlets - 5 - 90° elbows - Spanner wrenches and deburring tool D | PIN-FREE LOCKING 910-28075 3⁄4\" $39999 EA IMPACT U-JOINT SET $2799 SET H | FOLDING - 3 Piece set POCKET KNIFE WITH - 1⁄4\", 3⁄8\", and 1⁄2” Drive LOCKING WRENCH - Impact grade - Packaged in EVA foam - Blade length: 3\" 728-16151 - Stainless steel construction 728-11110 $1499 EA E | SAE FLARE NUT WRENCH SET - 3 Piece set - 15 degree offset on each flare end - Mirror polish finish provides an appealing look to the wrench - Slim body design allows for increased accessibility in tight areas 728-17388 $999 SET F | VARIOUS FUSE J | BRAKE LINE HOLDER ASSORTMENTS - Aluminum - 10\" wide, 5\" deep, 61/4\" tall 728-45229 96-PIECE MINI FUSE ASSORTMENT $999 EA - Pre-drilled mounting holes 96-PIECE BLADE FUSE ASSORTMENT - Lengths are labeled on front of display for quick reference 728-45227 24-PIECE MAXI FUSE ASSORTMENT 899 EA - Fits 9 sizes of lines storing 12 per slot - outermost 2 slots are 728-45232 88-PIECE MASTER AUTO FUSE ASSORTMENT 1899 EA for braided stainless lines AN3 or AN4 728-45230 1799 EA 916-31800 BRAKE LINE HOLDER $2599 EA 916-31801 3⁄16\" BRAKE LINE ASSORTMENT 11299 EA 346 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Shop F | OFFSET OXYGEN SENSOR A | LOCKING WRENCH AND SOCKET WALL CABINET 728-51739 OFFSET OXYGEN SENSOR WRENCH $999 EA - Weight: 25lbs 728-51704 OXYGEN SENSOR SOCKET 999 EA - Storage and security of valuable tools - Features sliding door for easier accessibility G | 10\" CUTTER $1299 EA - Pegged backing for hanging tools, keys, $5999 EA and other essential items - Cuts non-braided hose up to AN10 - Includes 30 steel hooks $1999 SET - Soft metal wiring or cables - Powder coated finish $499 SET - Not recommended for stainless - Steel construction for strength and durability steel braided hose - Assembled in carton 910-89803 728-21049 H | EXTRA-LONG ARM B | 3 PIECE STEP SAE HEX KEY SET DRILL BIT SET - Extra long design from maximum torque - High speed steel with - Ball tips for confined areas titanium finish - Patent pending textured finish for better grip - Drill multiple sizes with each bit - Easy to read laser etched sizes - 28 hole sizes in 3 bits: Bit one: 13 sizes from 1/8” to 1/2” EXTRA-LONG ARM SAE HEX KEY SET - CONTAINS: $2099 SET Bit two: 6 sizes from 3/16” to 1/2” 728-12713 0.05, 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 1699 SET Bit three: 9 sizes from 1/4” to 3/4” 728-16503 7/32”, 1/4”, 5/16”, 3/8” KEYS C | 3-PIECE FINGER GRIP 728-12714 EXTRA-LONG ARM METRIC HEX KEY SET - CONTAINS: 1.5, SCREWDRIVER SET 2, 2.5, 3, 4, 5, 6, 8 AND 10MM KEYS - Knurled for easier grip J | TAMPER RESISTANT STAR KEY SET - Interchangeable Bits - (1) 1⁄4\" Slotted Screwdriver Bit - T-6, T-7, T-8, T-9, T-10, T-15, T-20, - (1) #2 Phillips Screwdriver Bit T-25, T-27 and T-30 - (1) 1⁄4\" Socket Adapter - Drilled tips allow use on tamper 728-11218 resistant security screws - Chrome vanadium steel construction D | 34 PC. - Keys fold compact for easy storage HOSE CLAMP - Corrosion resistant anodized ASSORTMENT aluminum holders - (8) 5⁄8” 16mm - (4) 1” 25mm 728-12710 $1299 SET - (8) 3⁄4” 19mm - (4) 11⁄16” 27mm - (6) 7⁄8” 22mm - (4) 11⁄4” 32mm 728-45348 $1199 KIT K | ELECTRONIC DIGITAL CALIPER E | 9 PIECE IMPACT SOCKET SET WITH FRACTIONAL DISPLAY - Steel construction - 1⁄2\" drive - Black E-Coat finish - 1⁄2\" thru 1\" size - Easy to read fractions on large LCD display - 6-point - Sold as a set - Use for inside, outside, step, depth, and scribe measurements - 6” range (150mm) - Set zero at any position in measuring range - Fine adjust thumbwheel - Lock knob - Stainless steel components - Protective storage case - Includes battery 728-23173 $2499 EA 728-42300 $3442 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 347

TOOLS || Shop A | 7” POLISHER G | HVLP GRAVITY FEED SPRAY GUN - 11 Amp - Adjustable dial speed control - Brass fluid and air nozzle - Lock-on switch for comfort during extended use - 600cc plastic cup - Auxiliary handle mounts either side for left or right-hand use - Includes locking air regulator with gauge - Includes Velcro pad for sandpaper, and rubber pad for polishing bonnet - Air consumption 7.0-9.0 CFM - Also great for grinding tires - Air inlet 1⁄4\" - 2.3mm needle and nozzle 728-22504 $9499 EA 728-19023 $4499 EA B | HEAT GUN E | 8-PIECE AIR HOSE H | FUEL & AIR CONDITIONING BLOW GUN KIT LINE DISCONNECT - 12.5 Amps 120V Heat Gun - Ideal for plastic welding, shrink - Comes with a blow gun handle as - For fast and easy separation of quick well as 7 tips to go along with it disconnect style fittings tubing, and paint stripping - 1⁄4\" NPT female fittings - For use on 3/8”, 1/2”, 5/8”, 3/4”, lines - Dual temperature setting - (1) Blow gun - Necessary for fuel, heater, and A/C line - 3 position rocker switch: off, high & low - (1) Rubber tip service on many late model vehicles - Durable ABS body - (1) Air screen tip - Slidecard packaging - Double insulated - (1) Brass tip - 61/2” ft. cord - (1) Safety tip 728-51613 $699 EA - Rated Power: Low Setting 750W, High 1500W - (1) Adjustable tip - Blowing Speed: Low Setting: 10CFM - (1) Nylon tip J | 1.4MM GRAVITY - (1) Safety booster tip FEED HVLP (280 L/min), High Setting: 17CFM (480 L/min) SPRAY GUN - Temperature: Low Setting: 572 degrees, - High Setting: 932 degrees - Easy clean up and reliable performance 728-22400 $1999 EA - Gravity feed ensures virtually 100% material usage C | SPOT SPRAY 728-19436 $1499 EA - Stainless steel needle and NON-AEROSOL nozzle set SPRAYER - Spray pattern adjustment from round to full-fan shape - 80-150 PSI - Includes pressure regulator and cleaning kit operating pressure - Refillable $3499 EA 728-19014 $3999 EA - Not for use with 728-19112 PAINT GUN CLEANING KIT 699 EA paint products - Do not use with flammable propellants - Eco friendly 728-19419 D | SELF F | RACHETING WIRE K | 1.4MM NEEDLE & ADJUSTING TERMINAL CRIMPER NOZZLE SETS WIRE STRIPPER - Racheting mechanism design - For 1.4mm spray gun - Automatically adjusts - Adjustable crimping compression to strip 24-10 AWG - Steel jaw wire and cable - Color coded wire sizes: - Crimps 22-10 AWG insulated Red 22-18AWG-DIN 0.5-1.0mm and non-insulated wire terminals Blue 16-14AWG-DIN 1.5-2.5mm - Crimps 7-8mm ignition terminals Yellow 12-10AWG-DIN 4-6mm - Wire cutter - Comfortable TPR hand grips 728-11475 $2199 EA 728-11477 $2199 EA 728-19100 $2199 EA 348 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE