Product Catalogue 2016_6 - v2

Index 51SATRON VV Pressure Transmitter BLV810 01.01.2014 Dimensional drawings (drawings in mm) 125 100 100 100 Clearance for Clearance for Clearance for cover removal cover removal cover removal 60 70 max. 180 max. 210 ∅c b 350 (max) max. 210 Thread ∅d ∅D ∅c b 125 ∅d ∅D Instead of the flange Ø27 threaded sleeve can also be P used. 10 Flange and threaded sleeve E is possible to have also in E VVF type. See the threads in selection chart. In VVF type the place of the flange/ threaded sleeve can be changed by the customer. Ø3560 70 Ø35 Ø35 10 ∅ 63 Type VVF Type VVH max. 180 100Type VVP Clearance for125 cover removal GAP75 Säätötoleranssi 10 AV75 ADJUSTMENT TOLERANCE Flange mounting with adjustment facility, type VVP min. R75 150 340 380 8.2 218 (13.4) (15) ( 0.3) (8.6) Remote electronics, Flange Code ØD Ød Øc b 380 connecting cable with (15) protection hose, code L DN50 PN40 DB 165 125 4x18 20 400 (for transmitter types (15.7) VVP and VVH) DN80 PN40 DC 200 160 8x18 24 P/m E/m Type min. max. min. max. ANSI2\"150lb AC 152 120.6 4x20 23 VVF 1.0 20.0 - - ANSI2\"300lb AD 165 127 8x20 25 VVP - - 1.0 5.5 VVH - - 1.0 5.5 ANSI3\"150lb AE 191 152.4 4x20 26 Dimensions - Equipment cabinet ANSI3\"300lb AF 210 168.3 8x23 31

Index 52 BLV810 SATRON VV Pressure Transmitter 01.01.2014 Dimensional drawings (dimensions in mm) Ø48 Housing with plug-connector, DIN 43650, codes H and T PG9 std. housing types H and T 75 Housing with junction box/terminal Ø48 strip, code M M20 x 1,5 std. housing type M Housing with junction box/terminal strip, with display, code N70 M20 x 1,5 std. housing type N Housing with junction box/terminal strip, with display and plug- connector DIN 43650, code N--- /-P 90 PG9 std. housing type N with plug DIN 43650 Esc Enter

Index 53SATRON VV Pressure Transmitter BLV810 01.01.2014 Installation methods E E (2)* (1)* *) See the selection table \"Other mounting accessories\" mA mA Hart® S PZ 1 mA -+ -+ Z .5 3 -+ + - Test + - Test RUN D DN UP 60 Test Load 12 Power 3 Wiring 2 Load Housing with terminal strip, code N Power 12 13 Load Power Wiring Wiring Housing with PLUG connector, codes H and T Housing with terminal strip, code M 3 21 Load Power Wiring housing N with plug DIN 43650, code N---/-P

Index 54 BLV810 SATRON VV Pressure Transmitter 01.01.2014 Selection ChartTransmitter typesVVF Flexible PTFE hose (PTFE/AISI316 braiding)VVP PVC hose/FlangeVVH AISI316L hose/Flange (Fixed mounting tube)Adjustability Span, min. Span, max. Measuring range 3 1.4kPa (14 mbar) 35 kPa (350 mbar) -35...+35 kPa (-350...350 mbar) 4 4kPa (40 mbar) 100 kPa (1000 mbar) -100...+100 kPa (-1000...1000 mbar) 5 10 kPa (100 mbar) 500 kPa (5000 mbar) -100...+500 kPa (-1000...5000 mbar) Output S 4-20mA DC/HART® -protocol Flange or 0 no flange or thread DB DN50 PN40 DC DN80 PN40 AC ANSI 2\" 150lbs thread AF ANSI 3\" 300lbs GA G1½A AD ANSI 2\" 300 lbs AE ANSI 3\" 150 lbs NA 1½ - NPT NB 2 - NPT GB G2A GC G1A Wetted Flange Diaphragm Extension materials Code Material Code Material (type VVF=PTFE/AISI316) (type VVP=PVC) 2 AISI316L 2 AISI316L /317L (type VVH=AISI316) 3 Hast.C 276 3 Hast.C 276 (*) 5 Tantalum (*) Fill fluid S Silicone oil G Inert oil Housing type H Housing with PLUG-connector, DIN43650, no display, inlet PG9 T Housing with PLUG-connector with manual adjust, DIN43650, no display, inlet PG9, (no ATEX) M Housing with junction box/terminal strip, no display, inlet M20x1,5 N Housing with junction box/terminal strip, with display, inlet M20x1,5 C Transmitter with equipment cabinet (for transmitter type VVF and for special electronics) D Transmitter with equipment cabinet + heating element (for type VVF and for special electronics) Explosion 0 No explosion proof classification 1 Atex Intrinsic Safety, II 1 GD T135°C (**) proof Length P of PTFE/AISI316 hose between sensing element and housing (specify for transmitter type VVF) P10 1.0 m hose P25 2.5 m hose ... P200 20.0 m hose Length E of mounting/protective tube (specify for transmitter type VVP and VVH also with the type VVF if the protective tube is used) E10 1.0 m hose E15 1.5 m hose ... E55 5.5 m hoseOther mounting 0 No mounting accessoriesaccessories 1 Mounting bracket/Clamps/Protective tube 2 Clamps/Protective tubeSpecial size of electrical inletN 1/2 NPT G Pg13.5 P Plug DIN 43650Special featuresSpecial electronics (specify only if housing connected with hose to sensing element)for transmistter types VVP and VVH- connecting cable with protection hoseL Hose protected with PTFE/AISI316 braiding, straightK Hose protected with PTFE/AISI316 braiding, angle of 90oLength of cable between sensing element and housing(specify only if housing connected with cable to sensing element)2 2 m cable 3 3 m cable etc. (max. 10 m)Mounting parts for remote electronics for Ø51 mm tube0 No mounting parts 1 Mounting partsDocumentationCalibration Certificate AE EnglishInstallation and Operating Instructions IE English IF FinnishMaterial Certificates0 No material certificateMC1 Raw materials certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2)standardMC3 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-3.1B (DIN 50049-3.1B) standardWe reserve the right for technical modifications without prior notice. (*) = not for range 3HART® is a registered trademark of HART Communication Foundation.Hastelloy® is the registered trademark of Haynes International. (**) = Housing H and N : II 2 GD T135°CTeflon® is the registered trademark of E.I. du Pont de Nemours & Co.Viton® is the registered trademark of DuPont Dow Elastomers. ATEX transmitters with display are the model without membrane key.

Index 55 BLV811SATRON VVFe Pressure Transmitter M2, revision 3 1.5.2014SATRON VVFe pressure transmitter belongs to V-transmitter family.SATRON VVFe is used for 0 - 4 kPa...0-500 kPa ranges. It is a 2-wiretransmitter with HART® standard communication.SATRON VVFe pressure transmitter is suitable for liquid level measurementsin ground, rock and ships' tanks, drill well and in open channels.SATRON VVFe pressure transmitter can be used to measurecontaminating liquids. Possible foam on the surface of the measured liquiddoes not disturb the measurement.SATRON VVFe does not require compressed air supply.The transmitter's sensor is piezoresistive.TECHNICAL SPECIFICATIONSMeasuring range and span Long-term stability Housing: AISI303/316; Seals: NitrileSee Selection Chart. ±0.1 % of max. span per 12 months and Viton®; Nameplates: PolyesterZero and Span adjustment Temperature effect on compensated Enclosure class: IP66.Zero elevation: Calibrated span is freely temperature ranges -20...+80 °Cselectable on the specified range Zero and span shift, type VVFe 5: Calibrationdepending from the desired option. ±0.15 % of max. span For customer-specified range with 1 s.This can be made by using extern damping. (If range is not specified,control shafts (analog option), keyboard Zero and span shift, type VVFe 4: transmitter is calibrated for maximum(display option) or HART®275/375 ±0,25 % of max. span range.)communicator.Damping Mounting position effect Electrical connectionsTime constant is continuously Zero error <0.15 kPa, which can be Housing with PLUG connector, calibrated out. code H: adjustable 0.01 to 60 s. PLUG connector, connector type DIN Vibration effect (IEC 68-2-6: FC): 43650 model AF; Pg9 gland for cable;Response time ±0.1 % of measuring range/ wire cross section 0.5 to 1.5 mm2.Maximum 100 ms 2 g/10 to 2000 Hz Housing with junction box/terminalTemperature limits 4 g/10 to 100 Hz strip, codes M and N:Process: -10 to +80 °C M20x1.5, 1/2-NPT inlet; screwAmbient: -30 to +80 °C Power supply effect terminals for 0.5 to 2.5 mm2 wires.Shipping and storage: -40 to +80 °C. <±0.01 % of calibrated span per volt.Operating temperature of display: Load / Ω0 to +50ºC (does not affect operation of European Directive Informationthe transmitter). European Pressure Equipment Directive 1400Pressure limits (PED) (97/23/EY) 1250Min. and max. process pressure: See theappended tables. - Sound Engineering Practice 1000Volumetric displacement< 0.5 mm3 /max. span Electro Magnetic Compatibility 750Output 2-wire (2W), 4-20 mA, (EMC directive 2004/108/EC)user selectable for linear, square root, 500inverted signal or the transfer function Insulation test voltage(16 points)specified by the user 500 V rms 50 Hz. OperatingSupply voltage and permissible load 250 regionSee the load capacity diagram; CONSTRUCTION AND4-20 mA output: 10-35 VDC. CALIBRATION 0Humidity limits 0-100 % RH; freezing Wetted materials 10 12 15 20 25 30 35 40of condensed water is not allowed in Metal parts: AISI316L (EN 1.4404)reference pressure channels. Jacket of cable: PUR Supply voltage /V Other materials: AISI303/316 Min. load using HART® - communication 250 ΩPERFORMANCESPECIFICATIONS Fill fluid Silicone oil or inert oil. R max = Supply voltage - 12 VTested in accordance with IEC 60770:Reference conditions, specified span, Housing with PLUG connector, code I maxno range elevation,AISI316L diaphragm, H I max = 20.5 mA using HART®-communicationsilicone oil fill. Housing: AISI316/303 I max = 23 mA (when the alarm current 22,5 mA is on) Seals: Viton® and NBR TEST jacks: MS358Sn/PVDF, Supply voltage for transmitter protected with silicone rubber shield. without intrinsic safety (not ATEX) PLUG connector: PA6-GF30 jacket, Silicone rubber seal, AISI316 retaining screw. Housing with junction box/terminal strip, codes M and N:Accuracy Pressure limits Minimum process pressure• ±0.1 % of calibrated span Maximum process pressure, MPa (span 1:1-7.5:1 /max.range). Tproc. Minimum process pressure On the measuring ranges 7.5:1- 50:1: Max. Pressure for different fill fluids (kPa,abs.) overload class( )±[0.025+0.010 x pressure °Ccalibrated span max.span ]% of Transmitter type DC200 Inert oil calibrated span 100 cSt(incl. nonlinearity, hysteresis and 20 5 8repeatability) 40 8 10 VVFe 4 0.3 PN40 80 16 28 VVFe 5 1.5 PN40 120 21 53 Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 56 BLV811 SATRON VVFe Pressure Transmitter 1.5.2014 Weight : 0,9 kg Load / Ω Transmitter : 1,4 kg - with housing type H : 1,5 kg 1400 - with housing type M - with housing type N 1250 1000Product Certifications 750European Directive Information 500Electro Magnetic Compatibility 250 Operating(EMC directive 2004/108/EC) regionAll pressure transmitters 0 15 10 12 28Atex Directive (94/9/EC)Satron Instruments Inc. complies with the ATEX 20 25 30 35 40Directive. Supply voltage /VEuropean Pressure Equipment Directive (PED) (97/23/EC) Min. load using HART® - communication 250 ΩAll Pressure Transmitters : R max = Supply voltage - 12 V- Sound Engineering Practice I max I max = 20.5 mA using HART®-communication I max = 23 mA (when the alarm current 22,5 mA is on) Supply voltage for transmitter with certified intrinsic safety (ATEX)Hazardous Locations CertificationsEuropean CertificationsATEX Intrinsic SafetyCertification No. : DNV-2007-OSL-ATEX- 1346X II 1 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°C II 2 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°CInput Parameters :Ui = 28 VIi = 93 mAPi = 0.651 WCi = 5 nFLi = 0.2 mHSpecial Conditions for Safe Use (X) :The enclosure with plastic window and the plasticDIN43650 connector must not be installed inpotentially explosive atmosphere requiring category1 apparatus.The non-conducting surface of the sensor elementmay be charged by the flow of non-conductingmedia, so there may be electrostatic hazard withIIC-gases. These units should be marked 2 GD.The equipment shall be installed and connectedaccording to the manufacturers instructions.

Index 57 BLV811SATRON VVFe Pressure Transmitter 1.5.2014 Dimensions (mm) Ø6 Std. PG9 40 135 Ø22 min. R30 75 70 Ø48 100 P , maximum length 50 m Housing type H, plug connector, DIN43650, no display, inlet PG9 135 Housing type M, junction box/ terminal strip, no display, inlet M20x1.5 Std. M20 x 1,5 170 Housing type N, junction box/ terminal strip, with display, inlet M20x1.5 Std. M20 x 1,5 70

Index 58SATRON VVFe Pressure Transmitter BLV811Dimensions (mm) 1.5.2014 Housing type N, with plug connector, DIN43650 90 Std. PG9 Esc Enter Screws should not be tightened so much so that the cable inside the ref. pressure hose gets blocked! Satron SI-Toole Ø613 Orded code : M1330001 45 40Connection with Satron SI-Toole 60 26 Mounting part for cable AdjustingInstallation methods Adjusting Instead of theE flange threaded sleeve can(0)* (1)* (2)* also be used.*) See the selection table \"Other mounting accessories\" Flange or threaded sleeve

Index 59 BLV811SATRON VVFe Pressure Transmitter 1.5.2014 mA mA mA -+ -+ + - Test Har t® Test + - Test 1 2 -+ 3 2 Load Power 12 Load 13 Load Wiring Wiring Power Wiring Power Housing with PLUG connector, code H Housing with terminal strip, code M Housing with display, code N 3 Housing with display, code N 21 Keyboard : Load Power Esc = Press Esc move back towards the top of the main menu. Enter Wiring housing with plug DIN 43650, code N---/ -P = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value. = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value. = Press ENTER to move to a lower level in a menu or to accept a command or parameter value.

Index 60 BLV811SATRON VVFe Pressure Transmitter 1.5.2014Selection ChartAdjustability Span, min. Span, max. Measuring range VVFe 4 4kPa (40 mbar) 100 kPa (1000 mbar) -100...+100 kPa (-1000...1000 mbar) VVFe 5 10 kPa (100 mbar) 500 kPa (5000 mbar) -100...+500 kPa (-1000...5000 mbar) Output S 4-20mA DC/HART® -protocol Flange or 0 no flange or thread DB DN50 PN40 DC DN80 PN40 AC ANSI 2\" 150lbs thread AD ANSI 2\" 300 lbs AE ANSI 3\" 150 lbs AF ANSI 3\" 300lbs GA G1A, male sleeve GB G1½A, male GC G2A, male NA 1½ - NPT, male NB 2 - NPT, male Wetted Flange or thread sleeve Diaphragm Extension materials Code Material Code Material AISI316 / PUR 2 AISI316L (EN 1.4404) 2 AISI316L (EN 1.4435) Fill fluid S Silicone oil G Inert oil Housing type H Housing with PLUG-connector, DIN43650, no display, inlet PG9 M Housing with junction box/terminal strip, no display, inlet M20x1,5 N Housing with junction box/terminal strip, with display, inlet M20x1,5 Explosion 0 No explosion proof classification 1 Atex Intrinsic Safety, II 2 GD T135°C proof Length P of PTFE/AISI316 hose between sensing element and housing P10 1.0 m hose P25 2.5 m hose ... P500 50.0 m hose Length E of mounting/protective tube E10 1.0 m hose E15 1.5 m hose ... E55 5.5 m hoseOther mounting 0 No separate fastening partsaccessories 1 Separate fastening part for cable, adjustable 2 Mounting bracket and protective tubeSpecial size of electrical inletN 1/2 NPT G Pg13.5 P Plug DIN 43650DocumentationCalibration Certificate AE EnglishInstallation and Operating Instructions IE English IF FinnishMaterial Certificates0 No material certificateMC1 Raw materials certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2) standardMC3 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-3.1B (DIN 50049-3.1B) standardWe reserve the right for technical modifications without prior notice.HART® is a registered trademark of HART Communication Foundation.Hastelloy® is the registered trademark of Haynes International.Teflon® is the registered trademark of E.I. du Pont de Nemours & Co.Viton® is the registered trademark of DuPont Dow Elastomers.

Index 61 BLV820SATRON VL Pressure Transmitter M2, revision 4 15.06.2015SATRON VL pressure transmitter belongs to the V transmitter family. Theseries V transmitters have both analog and smart properties. SATRON VL Vibration effect (IEC 68-2-6: FC):is used for 0-1.4 kPa...0-15 MPa ranges. It is a 2-wire transmitter with ±0.1 % of span per 2 g to 10-2000 Hz.HART® standard communication. In pressure measuring applicationsSATRON VL transmitters are used for measuring the pressure of clean, Power supply effectsedimenting, crystallizing and sticking materials. The transmitter's sensor is <±0.01 % of calibrated span per volt.piezoresistive. The rangeability is 100:1 for types VL6 - VL7. The versatileselection of diaphragm materials will meet the needs in most processes. Insulation test voltageAlso the models with special accuracy are included to the series of VL 500 V rms 50 Hz.transmitters. CONSTRUCTION AND CALIBRATIONTECHNICAL SPECIFICATIONS MaterialsMeasuring range and span PERFORMANCESPECIFICATIONS Diaphragm 1): AISI316L (EN 1.4435),See Selection Chart. Tested in accordance with IEC 60770: AISI304 (EN 1.4301), Duplex (EN Reference conditions, specified span, no 1.4462), Hast. C 276 (EN 2.4819),Zero and Span adjustment range elevation, horizontal mounting; Tantalum or Titanium Gr2 (EN 3.7035).Zero elevation: Calibrated span is freely AISI316L diaphragm, silicone oil fill Other sensing element materials:selectable on the specified range AISI316L, AISI316.depending from the desired option. AccuracyThis can be made by using extern ±0.05 % of calibrated span Fill fluid Silicone oil, inert oil or Food oilcontrol shafts (analog option), keyboard (For spans 1:1-5:1). (Neobee M20).(display option), HART®275/375communicator. For spans 5:1-100:1, Housing with PLUG connector, codes H and TDamping ( )±[0.025+0.01 x max.span ]% of Housing: AISI303/316Time constant is continuously Seals: Viton® and NBRadjustable 0.01 to 60 s. calibrated span calibrated span TEST jacks: MS358Sn/PVDF, protected with silicone rubber shield.Temperature limits Special accurate diaphragm AISI304: PLUG connector: PA6-GF30 jacket,Ambient: -30 to +80 °C ±1.5 % of calibrated span Silicone rubber seal, AISI316 retainingProcess: -30 to +125 °C / +200 °C (For spans 1:1-100:1). screw.Shipping and storage: -40 to +80 °C.Operating temperature of display: (incl. nonlinearity, hysteresis and Housing with junction box/terminal0 to +50ºC (does not affect operation of repeatability) strip, codes M and Nthe transmitter) Housing: AISI303/316; Seals: Nitrile Long-term stability and Viton®; Nameplates: Polyester Process temperature/°C • ±0.1 % of max. span / 1 year Connection cable between sensing 200 Temperature effect on -30 °C to element and housing +80 °C range, optional Codes L and K : Zero and span error PTFE hose with AISI316 braiding. • ±0.15 % of max. span, code E • ±0.5 % of max. span, code G Calibration For customer-specified range with 1 s. 150 Temperature effect on +20 °C to damping. (If range is not specified, +70 °C range, process connections transmitter is calibrated for maximum Recommended BA and DA range.) 100 application range Zero and span error • ±0.08 % of max. span, code S Enclosure class: IP66. (horizontal mounting) Temperature effect on 0 to +200 °C, code H 50 • ±1 % of max. span • Process connection PA (VL4 and 5): 20 40 60 80 ±2 % of max. span ambient temperature/°C Mounting position effectOutput 2-wire (2W), 4-20 mA, Deviation from horizontal positionuser selectable for linear, square root, causes a zero shift that can beinverted signal or the transfer function calibrated out.(16 points)specified by the userSupply voltage and permissible load Pressure limits Minimum process pressure:See the load capacity diagram; Pressure capacity Tproc. Min.pressure for different 4-20 mA output: 12-35 VDC. fill fluids (kPa, abs.)Humidity limits Trans- Max. over- Pressure °C DC200 Inert0-100 % RH; freezing of condensed mitter load pres- class,water is not allowed in reference type sure, MPa max. 100 cSt oilpressure channels. VL3 0.2 PN40 20 5 8Pressure limits VL4 0.3 PN40 40 8 10Minimum and maximum process VL5 1.5 PN40 80 10 28pressure: see the appended tables. VL6 7.5 PN100 VL7 40.0 PN250 120 15 53 160 25 90 200 40 -1) Parts in contact with process medium. Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 62SATRON VL Pressure Transmitter BLV820 15.06.2015Process connections Product Certifications Input Parameters :See Selection Table and dimensional Ui = 28 Vdrawings. European Directive Information Ii = 93 mA Pi = 0.651 WElectrical connections Electro Magnetic Compatibility Ci = 5 nFHousing with PLUG connector, (EMC directive 2004/108/EC) Li = 0.2 mHcodes H and T: PLUG connector, All pressure transmittersconnector type DIN 43650 model AF; Special Conditions for SafePg9 gland for cable; wire cross-section Atex Directive (94/9/EC) Use (X) :0.5 to 1.5 mm2. Satron Instruments Inc. complies The enclosure with plastic with the ATEX Directive. window and the plasticHousing with junction box/terminal strip, DIN43650 connector must notcodes M and N: be installed in potentiallyPg13.5, 1/2-NPT inlet; screw terminals explosive atmosphere requiringfor 0.5 to 2.5 mm2 wires. category 1 apparatus. The non-conducting surface ofWeight Weight / kg European Pressure Equipment the sensor element may be Directive (PED) (97/23/EC) charged by the flow of non-MOUNTING EXTENSION CODE conducting media, so there mayTYPE 0 2 46 All Pressure Transmitters : be electrostatic hazard with IIC- 4.1 4.7 4.9 5.1 - Sound Engineering Practice gases. These units should be DN50 6.4 7.6 7.7 8.1 marked 2 GD. - 3.8 5.0 6.1 Hazardous Locations The equipment shall be installed Flange DN80 0.9 - - - Certifications and connected according to the 0.6 - - - manufacturers instructions. SA (Sandvik) 0,9 European Certifications Tx (Tri-Clamp) 1.0 - - - ATEX Intrinsic Safety PA (PMC 1\") BA, VA, WA Certification No. : DNV-2007-OSL- UA, VB, WB ATEX- 1346XType M : add 0.5 kgand type N : add 0.6 kg to the specifiedweights. II 1 GD T135°C EEx ia II C T4 - 20°C ≤ Tamb ≤ 50°C II 2 GD T135°C EEx ia II C T4 - 20°C ≤ Tamb ≤ 50°C Load / Ω 1400 1250 1000 750 500 250 Operating region 0 28 10 12 15 20 25 30 35 40 Supply voltage /V Min. load using HART® - communication 250 Ω R max = Supply voltage - 12 V I max I max = 20.5 mA using HART®-communication I max = 23 mA (when the alarm current 22,5 mA is on) Supply voltage for transmitter Supply voltage for transmitter without intrinsic safety (not ATEX) with certified intrinsic safety (ATEX)

Index 63SATRON VL Pressure Transmitter BLV820 15.06.2015 mA mA S PZ 1 mA -+ -+ Z .5 3 -+ + - Test + - Test RUN D DN UP 60 Test Hart® Load 12 Power 3 Hart® Wiring 2 Load Housing with terminal strip, code N Power 12 13 Load Power Wiring Wiring Housing with PLUG connector, codes H and T Housing with terminal strip, code M 3 Keyboard : 21 Esc = Press Esc move back towards the top of the main menu. Load Enter Power = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value. Wiring housing N with plug DIN 43650, code N-/ P = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value. = Press ENTER to move to a lower level in a menu or to accept a command or parameter value. Housing with display, code N S PZ 1 Z .5 3 RUN D DN UP 60 Test 1 2 3 Use of selector switch : RUN = working position PZ = Process value zero D = Damping adjustment S = Span adjustment Z = Zero adjustment DN = Down UP = Up Housing with PLUG connector, code T

Index 64SATRON VL Pressure Transmitter BLV820 Dimensional drawings (dimensions in mm) 15.06.2015 d2 Housing types H, T and M 235 Housing type N 265 [Atex transmitter code 1, +15] Clearance for cover removal 100 Ød4 PG9 std. housing types H and T M20 x 1,5 std. housing types M and N Process connections Ax, Dx and Jx, flanged kb Housing types H, T and M 180 D Housing type N 215 [Atex transmitter code 1, +15] Ø68 -0.1 Ø84 Ø48 -0.15 Ø115 Ø85 Ø115 19 +0.1 4xØ14 -0.3Process connection UA Es- Tuchenhagen DN50/40(Varinent) 23 adjustable ±3 Process connection SA 2 - Sandvik-clamp 43 Process connections DA, DN25 PN40 flange with extension, process temperature max. +125°C FLANGE Flange dimens. Holes Exten. SIZE 0 b D Ød4 Kpl d2 k Ød -0.2 -0.2 ISO DN25 PN40 18 115 68 ISO DN50 PN40 20 165 102 4 14 85 48 ∅d ISO DN80 PN40 24 200 138 4 18 125 51 ISO DN100 PN40 24 235 162 8 18 160 73 Process connection Ax, Dx and Jx ANSI 1\" 150 lbs 15 108 51 8 22 190 73 - flange with extension ANSI 1\" 300 lbs 18 124 51 4 16 79.4 - E ±0.4 ANSI 2\" 150 lbs 23 152 92 4 20 88.9 - ANSI 2\" 300 lbs 25 165 92Code E +0.4 Es +0.3 ANSI 3\" 150 lbs 26 191 127 4 20 120.6 51 -0.4 -0.2 ANSI 3\" 300 lbs 31 210 127 8 20 127 51 0 ANSI 4\" 150 lbs 26 229 157 4 20 152.4 73 2 0- ANSI 4\" 300 lbs 34 254 157 8 23 168.3 73 4 51 54,5 JIS 10K-50 16 155 96 8 20 190.5 73 6 102 105 JIS 40K-50 26 165 105 8 23 200 73 152 156 JIS 10K-80 18 185 126 4 19 120 51 JIS 40K-80 32 210 140 8 19 130 51 JIS 10K-100 18 210 151 8 19 150 73 JIS 40K-100 36 250 165 8 23 170 73 8 19 175 73 8 25 205 73

Index 65SATRON VL Pressure Transmitter BLV820 15.06.2015 Dimensional drawings (dimensions in mm) Housing types H, T and M 165 Housing type N 195 [Atex transmitter code 1, +15] Ø26.2 Process connection PA BA - extension - PMC 1\" code Housing types H, T and M 130 L L Housing type N 160 Hex 46 0 2 28,5 [Atex transmitter code 1, 3 51 +15 and temperature code H, +40] 4 72 102 72 Ø41 -0,025 M45 x 2 ØD Ø41 -0,025 M45x2 A Hex 46 Process connection BA A E Process connection BB - M45x2 with tapered - M45x2 ØD Process connection VA and VB Process connection WA and WB - SMS38 and SMS51 - SMS-SI38 and SMS-SI51 Size Dimensions Thread Dimensions Thread ØD A 38 54 21 Rd 60 x 1/6 Size ØD A E Rd 60 x 1/6 51 64 23 Rd 70 x 1/6 54 21 24 Rd 70 x 1/6 SI38 64 23 27 SI51 20 Housing types H, T and M 215 Optio K Housing type N 245 100 ATEX transmitter +15 125 ØD Clearance for 110cover removal 110 eg. DN80 flange min. 205 min. R75 Process connection TA, TB and TC 60 Optio L - Tri-clamp DN38 ... 63.5 PG9 std. housing types H and T DN ØD M20 x 1,5 std. housing types M and N 38 50,5 Remote electronics, eg. DN80 flange min. 345 51 64 connecting cable with 63,5 77,5 protection hose, codes L and K

Index 66 BLV820 SATRON VL Pressure Transmitter 15.06.2015 Dimensional drawings (dimensions in mm) Ø48 Housing with plug-connector, DIN 43650, codes H and T PG9 std. housing types H and T 75 Housing with junction box/terminal Ø48 strip, code M M20 x 1,5 std. housing type M Housing with junction box/terminal strip, with display, code N70 M20 x 1,5 std. housing type N Housing with junction box/terminal strip, with display and plug- connector DIN 43650, code N- / P 90 PG9 std. housing type N with plug DIN 43650 Esc Enter

Index 67SATRON VL Pressure Transmitter BLV820Selection Chart Span, max. 15.06.2015 35 kPa (350 mbar) Adjustability ( ±) Span, min. 100 kPa (1000 mbar) Measuring range 500 kPa (5000 mbar) -35...+35 kPa (-350...350 mbar) VL3 1.4kPa (14 mbar) 500 kPa (5000 mbar) -100...+100 kPa (-1000...1000 mbar) VL4 4kPa (40 mbar) 3 MPa (30 bar) -100...+500 kPa (-1000...5000 mbar) VL5 10 kPa (100 mbar) 3 MPa (30 bar ) -100...+500 kPa (-1000...5000 mbar), abs. VLA5 10 kPa (100 mbar) 15 MPa (150 bar) -0.1...+3 MPa (-1...30 bar) VL6 0,03 MPa (0,3 bar) 0...+3 MPa (0...30 bar), abs. VLA6 0,03 MPa (0,3 bar) 0...+15 MPa (0...150 bar), abs. VL7 1 MPa (10 bar) Output S 4-20mA DC/HART® -protocol Process connections DA DN25 PN40 ISO 2084-1974 AA ANSI 1\" 150 lbs ANSI B16-5 TC Tri-clamp DN63.5 PN40 ISO 2852 ANSI 1\" 300 lbs ANSI B16-5 UA Tuchenhagen DN50/40 (Varivent) PN40 DB DN50 PN40 ISO 2084-1974 AB ANSI 2\" 150 lbs ANSI B16-5 PA PMC 1\" PN40 ANSI 2\" 300 lbs ANSI B16-5 SA Sandvik DN70 PN64 DC DN80 PN40 ISO 2084-1974 AC ANSI 3\" 150 lbs ANSI B16-5 VA SMS 38 ANSI 3\" 300 lbs ANSI B16-5 VB SMS 51 DD DN100 PN40 ISO 2084-1974 AD ANSI 4\" 150 lbs ANSI B16-5 WA SMS-SI 38 with 24 mm extension ANSI 4\" 300 lbs ANSI B16-5 WB SMS-SI 51 with 27 mm extension JA JIS 10K 50 JIS B 2220 AE Tri-clamp DN38 PN40 ISO 2852 BA M45x2 PN160 Tri-clamp DN51 PN40 ISO 2852 BB M45x2 PN160 JB JIS 40K 50 JIS B 2220 AF JC JIS 10K 80 JIS B 2220 AG JD JIS 40K 80 JIS B 2220 AH JE JIS 10K 100 JIS B 2220 TA JF JIS 40K 100 JIS B 2220 TB Extension length (mm) (Flanged conn.) (Sandvik-conn.) (not proc. conn. SA) 00 - (only proc. conn. DA, DN25 PN40, max. +125°C) 1 23 - (not proc. conn, BB, DA, PA, Tx, UA, Vx and Wx) 2 51 54.5 (only proc. conn. BA, in the Pasve BA mounting) 3 72 - (not proc. conn, BB, DA, PA, Tx, UA, Vx and Wx) 4 102 105 (not proc. conn, BB, DA, PA, Tx, UA, Vx and Wx) 6 152 156 Wetted materials Diaphragm Extension or other wetted parts Code Material Code Material Code Material 1 Nickel (*) 2 AISI316L 2 AISI316L 5 Tantalum 3 Hast.C 276 3 Hast.C 276 8 Duplex (EN1.4462) 6 Titanium Gr2 (*) 8 Duplex (**) A AISI304 Fill fluid S Silicon oil G Inert oil A Food and beverage special oil (Neobee M20) Housing type H Housing with PLUG-connector, DIN43650, no display, inlet PG9 T Housing with PLUG-connector with manual adjust, DIN43650, no display, inlet PG9, (no ATEX) M Housing with junction box/terminal strip, no display, inlet M20x1,5 N Housing with junction box/terminal strip, with display, inlet M20x1,5 Explosion proof 0 No explosion proof classification 1 Atex Intrinsic Safety, II 1 GD T135°C (***) Temperature effect on -30°C to +80°C range, % per max. span G ±0,5% E ±0,15% Temperature effect on +20°C to +70°C range, % per max. span S ±0.08% (only process connections BA and DA) Temperature effect on 0°C to +200°C range, % per max. span H ±1% (not possible process connections DA1, TA, TB and TC)Process coupling (for types SA, Tx, PA and BA) Material 0 No coupling 2 AISI316L A With coupling 3 Hast.C276 8 Duplex (1.4462)Special size of electrical inlet N 1/2 NPT G Pg13.5 P Plug DIN 43650Special featuresSpecial electronics (specify only if housing connected with hose to sensing element)- connecting cable with protection hoseL Hose protected with PTFE/AISI316 braiding, straightK Hose protected with PTFE/AISI316 braiding, angle of 90ºLength of cable between sensing element and housing(specify only if housing connected with cable to sensing element)2 2 m cable 3 3 m cable etc. (max. 10 m)Mounting parts for remote electronics for Ø51 mm tube0 No mounting parts 1 Mounting partsDocumentationCalibration Certificate AE EnglishInstallation and Operating Instructions IE English IF FinnishMaterial Certificates0 No material certificateMC1 Raw materials certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2) standardMC3 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-3.1B (DIN 50049-3.1B) standard

Index 68SATRON VL Pressure Transmitter BLV820 15.06.2015SMS-SI couplings : L2 Coupling M45x2 with adjust, for process connection BA, L1 order code M1050459 28,5for pipe for vesselØd ØD Size Dimensions M45x2ØD Thread 38 L1 Ød L2 Ø6060 Rd 60 x 1/6 51 27 38,5 24 Ø6070 Rd 70 x 1/6 30 51 25Pasve BA working position: Coupling BB M45x2, for process connection BB, order code M1050474 (Welding assistant, code M1050473)For process connections BA3 and BB1. Transmitter in measuring 572. Transmitter can be checked, changed, calibrated or the transmitter diaphragm can be flushed 1. 2. (*) = only with flange (**) = not for range 3 with process connection code PA (***) = Housing H and N : II 2 GD T135°C ATEX transmitters with display are the model without membrane key. Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.comWe reserve the right for technical modifications without prior notice.HART® is a registered trademark of HART Communication Foundation.Viton® is the registered trademark of DuPont Down Elastomers.Hastelloy® is the registered trademark of Haynes International.Teflon® is the registered trademark of E.I. du Pont de Nemours & Co

Index 69 BLVT830SATRON VDtL Differential Pressure Transmitter M3, revision 5 11.01.16SATRON VDtL differential pressure transmitter belongs to V-transmitterfamily. The series V transmitters have both analog and smart properties. Duplex or Hast. C276.SATRON VDtL is used for 1.4 kPa...3 MPa ranges. It is a 2-wire O-ring on sensing element: PTFE.transmitter with HART® standard communication. In pressure measuring Other sensing element materials:applications SATRON VDtL transmitters are used for liquid level, pipeline AISI316, SIS 2343, SIS 2324.pressure and density measurements. SATRON VDtL transmitter is Mounting bolts and nuts for sensorequipped with an SOS (Silicon On Sapphire) sensing element. The flanges: AISI316 (PN420: m.8.8.Zne)rangeability is 25:1. Fill fluidTECHNICAL SPECIFICATIONS Silicone oil (DC200, 10 cSt) or inert oil or food industry oil (Neobee M-20).Measuring range and span Humidity limitsSee Selection Chart. 0-100 % RH; freezing of condensed Housing with PLUG connector, codes water not allowed in reference H and TZero and Span adjustment pressure channels. Housing: AISI316Zero elevation: Calibrated span is freely Seals: Viton® and NBRselectable on the specified range PERFORMANCESPECIFICATIONS TEST jacks: MS358Sn/PVDF, protecteddepending from the desired option. Tested in accordance with IEC 60770: with silicone rubber shield.This can be made by using extern Reference conditions, specified span, PLUG connector: PA6-GF30 jacket,control shafts (analog option), keyboard no range elevation, horizontal Silicone rubber seal, AISI316 retaining(display option), HART®275/375 mounting; AISI316L diaphragm, silicone screw.communicator. oil fill. Housing with junction box/terminalDamping Accuracy strip, M and NTime constant is continuously ±0.05 % of calibrated span Housing: AISI303/316 Seals: Nitrile and Viton® adjustable 0,01 to 60 s. (span 1:1-5:1 /max.range). Nameplates: Polyester On the measuring ranges 5:1-25:1:Temperature limits Connection hose between sensingProcess temperature: ( )±[0.01+0.012 x element and housingrange 3: +10 to +80 °C (codes L and K):ranges 4, 5 and 6: -30 to +120 °C calibrated span PTFE hose with AISI316 braiding.Ambient temperature: -30 to +80 °C max.span ]% ofShipping and storage: -30 to +80 °C. calibrated span CalibrationOperating temperature of display: 0 to For customer-specified range with 1s.+50ºC (does not affect operation of the Special accurate diaphragm AISI304: damping. (If range is not specified, ±1.5 % of calibrated span. transmitter is calibrated for maximumtransmitter) (For spans 1:1 - 25:1) range.) (incl. nonlinearity, hysteresis and Enclosure class: IP66. repeatability) Process connectionsPressure limits Long-term stability S1) ePeaSrtesleincctioonntTaacbt wleith process medium.Withstands 40 bar static pressure andunequal pressure load without damage ±0.1 %/max. span for 12 months Load / Ωto the transmitter. Pressure class: see 1400 1250Process Connections. See the following Temperature effect on compensatedtable for minimum pressure limits. 1000 temperature range 750 Minimum process pressure: Ambient: Zero and span shift: ±0.5 % of max. span. 500 Tproc Min. pressure for different Process: Zero error: ±0.5 % of Operating fill fluids (kPa, abs.) max.span (ranges 4,5 and 6), 250 region °C ±1 mbar per 10 K or min. ±0.5 % of 0 max.span (range 3) 10 12 15 20 25 30 35 40 DC200 Inert Supply voltage /V 10 cSt oil Min. load using HART® - communication 250 Ω R max = Supply voltage - 12 V 20 5.0 8.0 Static pressure effect on Zero 60 12.0 18.5 • ±0.5 % of max.span per 4 MPa I max 80 16.0 28.0 I max = 20.5 mA using HART®-communication 120 21.0 53.0 Mounting position effect I max = 23 mA (when the alarm current 22,5 mA is on) Deviation from horizontal positionVolume of negative-side process causes a zero shift that can bechamber: 2.5 cm3. calibrated out.Process chamber’s volumetric Power supply effectdisplacement for maximum span: < ±0.01 % of calibrated span per volt.< 0.1 cm3 Insulation test voltageOutput 2-wire (2W), 4-20 mA, 500 V rms 50 Hzuser selectable for linear, square root,inverted signal or the transfer function (16 CONSTRUCTION AND CALIBRATIONpoints)specified by the user Materials Diaphragms 1): AISI316L (EN 1.4435),Supply voltage and permissible load AISI304 (EN 1.4301), Duplex (ENSee the load capacity diagram; 1.4462), Hast. C276 (EN 2.4819),4-20 mA output: 12-35 VDC. Nickel, Titanium Gr2 (EN 3.7035) or Tantalum. Flanges 1) and vent valves 1): AISI316, Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 70SATRON VDtL Differential Pressure Transmitter BLVT830 11.01.2016Electrical connections Load / ΩHousing with PLUG connector, H and T :PLUG connector, connector type DIN 43650 model AF; Pg9 1400gland for cable; wire cross-section 0.5 to 1.5 mm2. 1250Housing with junction box/terminal strip, M and N: 1000Inlet M20x1.5, 1/2-NPT; screw terminals for 0.5 to 2.5 mm2wiresProduct Certifications 750European Directive Information 500Electro Magnetic Compatibility 250 Operating(EMC directive 2004/108/EC) regionAll differential pressure transmitters 0 15 10 12 28Atex Directive (94/9/EC)Satron Instruments Inc. complies with the ATEX 20 25 30 35 40Directive. Supply voltage /VEuropean Pressure Equipment Directive (PED) (97/23/EC) Min. load using HART® - communication 250 ΩAll Differential Pressure Transmitters : R max = Supply voltage - 12 V- Sound Engineering Practice I max I max = 20.5 mA using HART®-communication I max = 23 mA (when the alarm current 22,5 mA is on)Hazardous Locations Certifications Supply voltage for transmitter with certified intrinsic safety (ATEX)European CertificationsATEX Intrinsic SafetyCertification No. : DNV-2007-OSL-ATEX- 1346XII 1 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°CII 2 GD T135°C EEx ia II C T4 -20°C ≤ Tamb ≤ 50°CInput Parameters : Weight (kg):Ui = 28 V See the table; add 0,6 kg for transmitter with screwed capIi = 93 mA housing and 0,7 kg for housing with display.Pi = 0.651 WCi = 5 nFLi = 0.2 mHSpecial Conditions for Safe Use (X) :The enclosure with plastic window and the plasticDIN43650 connector must not be installed in potentiallyexplosive atmosphere requiring category 1 apparatus.The non-conducting surface of the sensor element maybe charged by the flow of non-conducting media, sothere may be electrosatic hazard with IIC-gases. Theseunits should be marked 2 GD.The equipment shall be installed and connectedaccording to the manufacturers instructions. Type Extension code 6 0 24 10.4 Ax, Dx, JX* 9.2 9.6 10 8.1 SA* 7.2 7.7 * process connection code

Index 71 BLVT830SATRON VDtL Differential Pressure Transmitter 11.01.2016Dimensions (in mm) d2 Housing types H, T and M 188 Housing types N 218 54±0,2 M10 / deep 14 / PN100 d2 k 96 D 175 Pg9 std. Housing types H and T Ø18.5 +0.3 Process connection >100 0 types Ax, Dx and Jx >290 125 1/4-18 NPSF +0.5 0 2.5 14.5 Notice! The flange dimensions on the last page! A-A Housing types H, T and M 215 100 Housing type N 245 125 AA 110 min. R75 Optio L 60 Pg9 std. Housing types H and T M20x1,5 std. Housing type N Optio K

Index 72 BLVT830SATRON VDtL Differential Pressure Transmitter 11.01.2016Dimensions (mm) Notice! d2 The flange dimensions on the last page! 20 0 -0.2 ∅d ØD k E ±0.4 Process connection types TA , D TB and TC - Tri-clamp DN38 ... 63,5 Process connection types Ax, Dx and Jx, with extension DN ØD 38 50,5 51 64 63,5 77,5 Dim. E Extension code 6 A 0 24 152 0 51 102 Ø115 ØD Es +0.1 Process connection types VA and VB -0.3 - SMS38 and SMS51 Process connection type SA Size Dimensions Thread Extension code 38 ØD A Rd 60 x 1/6 51 54 21 Rd 70 x 1/6 24 6 64 23 Dim. Es 54.5 105 156 Hex 46 72 Hex 46 72 Ø41 -0,025 M45 x 2 Ø41 -0,025 M45x2 Process connection BA Process connection BB - M45x2 - M45x2 with tapered

Index 73 BLVT830SATRON VDtL Differential Pressure Transmitter 11.01.2016 Dimensional drawings (dimensions in mm) Ø48 Housing with plug-connector, DIN 43650, codes H and T PG9 std. housing types H and T 75 Housing with junction box/terminal Ø48 strip, code M M20 x 1,5 std. housing type M Housing with junction box/terminal strip, with display, code N 70 M20 x 1,5 std. housing type N Housing with junction box/terminal strip, with display and plug- connector DIN 43650, code N- / P 90 PG9 std. housing type N with plug DIN 43650 Esc Enter

Index 74 BLVT830SATRON VDtL Differential Pressure Transmitter 11.01.2016 mA mA S PZ 1 mA -+ -+ Z .5 3 -+ + - Test + - Test RUN D DN UP 60 Test Hart® 12 3 Hart® 2 Load Load Power 12 13 Load Power PowerWiring Wiring WiringHousing with PLUG connector, codes H and T Housing with terminal strip, code M Housing with terminal strip, code N 3 Keyboard : 21 Esc = Press Esc move back towards the top of the main menu. Load Enter Power = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value.Wiring housing with plug DIN 43650, code N-/ P = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value. = Press ENTER to move to a lower level in a menu or to accept a command or parameter value. Housing with display, code N S PZ 1 Z .5 3 RUN D DN UP 60 Test 1 2 3Use of selector switch :RUN = working positionPZ = Process value zeroD = Damping adjustmentS = Span adjustmentZ = Zero adjustmentDN = DownUP = UpHousing with PLUG connector, code T

Index 75 BLVT830SATRON VDtL Differential Pressure Transmitter 11.01.2016Selection ChartVDtL Differential Pressure Transmitter Adjustability ( ± ) Span, min. Span, max. Measuring range 3 1,4 kPa (14 mbar) 35 kPa (350 mbar) -35...+35 kPa (-350...+350 mbar) 4 4 kPa (40 mbar) 100 kPa (1000 mbar) -100...+100 kPa (-1000...+1000 mbar) 5 26,5 kPa (265 mbar) 500 kPa (5000 mbar) -500...+500 kPa (-5000...+5000 mbar) 6 145 kPa (1,45 bar) 3 MPa (30 bar) -3...+3 MPa (-30...+30 bar) Output S 4-20mA DC/HART® -protocol Process connections JE JIS 10K 100 JIS B 2220 TA Tri-clamp DN38 PN40 ISO 2852 DB DN50 PN40 ISO 2084-1974 JF JIS 40K 100 JIS B 2220 TB Tri-clamp DN51 PN40 ISO 2852 DC DN80 PN40 ISO 2084-1974 AC ANSI 2\" 150 lbs ANSI B16-5 TC Tri-clamp DN63.5 PN40 ISO 2852 DD DN100 PN40 ISO 2084-1974 AD ANSI 2\" 300 lbs ANSI B16-5 SA Sandvik DN70 PN64 JA JIS 10K 50 JIS B 2220 AE ANSI 3\" 150 lbs ANSI B16-5 VA SMS 38 JB JIS 40K 50 JIS B 2220 AF ANSI 3\" 300 lbs ANSI B16-5 VB SMS 51 JC JIS 10K 80 JIS B 2220 AG ANSI 4\" 150 lbs ANSI B16-5 BA M45x2 PN160 JD JIS 40K 80 JIS B 2220 AH ANSI 4\" 300 lbs ANSI B16-5 BB M45x2 PN160 with tapered Process connection SA Extension length/mm Process connections DC, AE and AF 0 0 - 2 54.5 4 51 105 6 102 156 152 Wetted materials (-)-diaphragm Extension (-)-flange (+)diaphragm (-)diaphragm coating Code Material Code Material Code Material Code Material Code Material 2 AISI316L 1 Nickel (*) 2 AISI316L/317L 2 AISI316L 9 gold/Rhodium 3 Hast.C 276 2 AISI316L 3 Hast.C 276 3 Hast.C 276 3 Hast. C276 5 Tantalum 8 Duplex (Do not enter 5 Tantalum 8 Duplex code if diaphragm 6 Titanium Gr2 (*) not coated) 8 Duplex (EN 1.4462) A AISI304 Fill fluid S Silicone oil A Oil for food Industry (Neobee M-20) G Inert oil (-)-side process D M10, PN100, ranges 3 to 6, IEC 61518. connection U 7/16-20 UNF, PN100, ranges 3, 4, and 5 only. F Screwed flange adapters, PN100, IEC 61518. V Connection through hydraulic seal (not recommended for ranges 3 and 4). Housing type H Housing with PLUG-connector, DIN43650, no display, inlet PG9 T Housing with PLUG-connect.with manual adjust, DIN43650, no display, inlet PG9, no ATEX M Housing with junction box/terminal strip, no display, inlet M20x1,5 N Housing with junction box/terminal strip, with display, inlet M20x1,5 Explosion proof 0 No explosion proof 1 Atex Intrinsic Safety, II 1 GD T135°C (**)Process coupling Material0 No coupling 2 AISI316L (EN 1.4404)A With coupling 3 Hast.C276 (EN 2.4819) 8 Duplex (EN 1.4462)Process threadon flange adapter Thread type Thread size(only specify for Code Type Code Size(-)-side R straight R thread 2 1/4process conn. F) N NPS thread 3 3/8 P taper R thread 4 1/2 T NPT threadSpecial size of electrical inlet N 1/2 NPT G Pg13.5 P Plug DIN 43650Special featuresSpecial electronics (specify only if housing connected with hose to sensing element)- connecting cable with protection hoseL Hose protected with PTFE/AISI316 braiding, straightK Hose protected with PTFE/AISI316 braiding, angle of 90ºLength of cable between sensing element and housing(specify only if housing connected with cable to sensing element)2 2 m cable 3 3 m cable etc. (max. 10 m)Mounting parts for remote electronics for Ø51 mm tube0 No mounting parts 1 Mounting partsDocumentationCalibration Certificate AE English IF FinnishInstallation and Operating Instructions IE EnglishMaterial Certificates0 No material certificateMC1 Raw materials certificate without appendices, in accordance with SFS-EN 10204-2.1 (DIN 50049-2.1) standardMC2 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-2.2 (DIN 50049-2.2) standardMC3 Raw materials certificate for wetted parts with appendices, in accordance with SFS-EN 10204-3.1B (DIN 50049-3.1B) standard (*) = only with flange (**) = Housing H and N : II 2 GD T135°C

Index 76 BLVT830SATRON VDtL Differential Pressure Transmitter 11.01.2016 Flange Flange dimensions Holes Extension size pcs d2 k b D Ød4 4 18 125 Ød -0.2ISO DN50 PN40 20 165 102 8 18 160ISO DN80 PN40 24 200 138 8 22 190 51ISO DN100 PN40 24 235 162 4 20 120.6 73 23 152 92 8 20 127 73ANSI 2\" 150 lbs 25 165 92 4 20 152.4 51ANSI 2\" 300 lbs 26 191 127 8 23 168.3 51ANSI 3\" 150 lbs 31 210 127 8 20 190.5 73ANSI 3\" 300 lbs 26 229 157 8 23 200 73ANSI 4\" 150 lbs 34 254 157 4 19 120 73ANSI 4\" 300 lbs 16 155 96 8 19 130 73JIS 10K-50 26 165 105 8 19 150 51JIS 40K-50 18 185 126 8 23 170 51JIS 10K-80 32 210 140 8 19 175 73JIS 40K-80 18 210 151 8 25 205 73JIS 10K-100 36 250 165 73JIS 40K-100 73Process connection types Ax, Dx and Jx Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.comWe reserve the right for technical modifications without prior notice. (**) = ATEX transmitters with display are theHART® is a registered trademark of HART Communication Foundation. model without membrane key.Viton® is the registered trademark of DuPont Down Elastomers.Hastelloy® is the registered trademark of Haynes International.Teflon® is the registered trademark of E.I. du Pont de Nemours & Co

Index 77 \"#$% !! %&' ($%%)* * !! + , !\" # *- . . ** ! $! %& %- % ! &'() '( ( ) % ! &'+) !\"#$ ! & -) !\"#$ *, . / 01)* * + * $ , +* * )* * *, , -.* -* $*+ -/%( !\"# ! !\" # $%$ \" & !\" # $%$ \" '''

Index 78

Index 79SATRON PASVE Mounting & Service Valve G340 01.10.2015 Selection table PASVE Body G Standard model (with 3 seals) N Flushing (with 2 seals) Mounting Wetted parts (C and P) Code Material AISI316L (std.) C On container 2 Hastelloy C P On pipe 3 4 AISI904L F On flange 6 Titanium 8 Duplex Flanges Wetted parts Code Type Code Material T DN50 PN40 2 AISI316L (only manual) 3 Hastelloy® C276 D DN80 PN40 4 AISI904LPASVE® is a ball-type mounting & J DN100 PN10/16 6 Titaniumservice valve for SATRON VG and HG C DN100 PN40type level and pressure transmitters. K ANSI 2½\"/150lbs 8 Duplex (EN 1.4462)PASVE® makes it simple to discon- (only manual) P1 PVDF PN10nect the transmitter from the processfor maintenance and cleaning, without A ANSI 3\"/150 lbs (P1 only for flange codes D,A,E)stopping the process or draining thetank. B ANSI 3\"/300 lbsPASVE® is available in a manuallyoperated type or equipped with a H ANSI 4\"150 lbspneumatic actuator. G ANSI 4\"/300 lbsTECHNICAL SPECIFICATIONS SealsTransmitter connection 0 PTFE + 20C + 5Gr (std.)G1 female, seat accepts SATRON VG-transmitters. 1 PTFE 100% 4 PTFE + 20C + 5Gr / AISI316 / PTFE 50 % (Hard)Max. operating pressure/temperature 5 PTFE 100% / AISI316 / PTFE 50% (Hard)Pressure 40 bar, temperature 250 °C, 6 PTFE 100% / PVDF 100% (Hard)(see the appended table).Min. operating temp. -50 °C. Pt100 temperature sensor (Only with body code N)PVDF: See the appended table. 0 No sensor X With sensor (measuring range: -50...+200 °C)MaterialsWetted parts: AISI316L, AISI904L,Duplex, ActuatorHastelloy C276, Titanium, for F type alsoPVDF. Seals PTFE or PTFE with carbon MD No actuator (manually operated) AE1 Electric actuator 230 Vand graphite filling. Electric actuator 115 V AD_ Double-action actuator AE3WeightPASVE GC 4.3 kg, PASVE GP 4.2 kg, AS_ Spring-return actuatorPASVE GF 8.4 kg, Actuator 5.5 kg Solenoid valve type (for codes AD and AS only)Pressure/Temperature curvebar PN40/ANSI300lbs 0 _ No solenoid valve 4 _ 28 V DC 0.4 W (only EEx ia) 40 1 _ 230 V AC 50 Hz 2 W (std.) 2 _ 24 V DC 2.5 W (also EEx dm) 3 _ 115 V AC 60 Hz 2 W Solenoid explosion proof 3 EEx dm IIC T5/T6 0 No explosion proof 1 EEx m II T4 2 EEx ia IIC T6 Position switches A Position switch EEx ib IIC T5/T6 0 None E Position switch NAMUR, DIN 19234 X Equipped with position switches Options Z4 Cutting ball Z1 For oxygen use Z5 Diamond-coated ball Z2 Process side flushing IF Finnish Documentation IE English Material certificates MC2 SFS-EN 10204-2.2 (DIN50049-2.2) 0 No material certificate MC3 SFS-EN 10204-3.1B (DIN50049-3.1B) MC1 SFS-EN 10204-2.1 (DIN50049-2.1) Specification example: PASVE G FD2 0 0 AD10 X IE MC13020 ANSI150lbs ¼ - NPSF10 M6 ¼ - NPSF PVDF PN10 -50 0 50 100 150 200 250°C Body G Body N Satron Instruments Inc., P.O.Box 22, FIN-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 80SATRON PASVE Mounting & Service Valve G340 01.10.2015Dimensions (mm) Manually operated PASVE GF-(a) PASVE GC PASVE GP NF-(a) NC NP Flange type Welded on container Welded on pipe 55 41 66 L LL R262 Ø127 R262 R262 ØD Ø115 6.5 Ø70 A GF-(a) ØD Ød A With pneumatic actuator FLANGE 172 139.7 22 PASVE GF-(a) PASVE GC PASVE GPCode Type 191 152.4 22 NP 210 168.3 27 NF-(a) NC K ANSI 2½\" 150 lbs 229 190.5 26 66 A ANSI 3\" 150 lbs 254 200 29 L 55 ØD B ANSI 3\" 300 lbs 165 125 20 Ød H ANSI 4\" 150 lbs 200 160 22 A G ANSI 4\" 300 lbs 220 180 22 41 T DN50 PN40 235 190 26 D DN80 PN40 185 150 20 J DN100 PN10/16 210 170 30 C DN100 PN40 E JIS10K 80 F JIS40K 80 300 225 Ø127 Ø115 6.5 Ø70 260 (type AD) 390 (type AS)OPERATING POSITIONS Surface temperatureMeasuring Replacement Cleaning and Ambient temperature Temperatureposition and zero checking, °C class setting only manual 70 model 85 T6 120 T5 T4 European Directive Information ATEX directive (94/9/EC) Satron Instruments Inc. complies with the ATEX directive.We reserve the right for technical modifications without prior notice. European Pressure Equipment Directive (PED) (97/23/EC) - Sound Engineering PracticeTeflon® is the registered trademark Hastelloy® is the registered trademarkof E.I. du Pont de Nemours & Co of Haynes International. European CertificationPasve® is the registered trademark of Satron Instruments Inc. II 3 GD

Index 81SATRON PASVE BA Mounting & Service Valve G360 15.11.2012 Selection table PASVE BA Mounting Wetted parts (C and P) Code Material C On container 2 AISI316L(EN 1.4404) (std.) P On pipe 3 Hastelloy C (EN 2.4819) 4 AISI904L (EN 1.4539) 6 Titanium Ti-2 (EN 3.7035) 8 Duplex (EN 1.4462) K 254 SMO®PASVE® BA is a ball-type mounting F Flange Wetted parts& service valve for SATRON VL- and Code MaterialVDtL - pressure and differential Flanges 2 AISI316Lpressure transmitters and also for 3 Hastelloy® C276Satron HPS hydraulic pressure seals. Code Type 4 AISI904LPASVE® BA makes it simple to D DN80 PN40 6 Titaniumdisconnect the transmitter from the J DN100 PN10/16 8 Duplex (EN 1.4462)process for checking, changing the C DN100 PN40 K 254 SMO®transmitter, flushing and calibration A ANSI 3\"/150 lbswithout stopping the process. B ANSI 3\"/300 lbsPASVE® BA is available in a H ANSI 4\"150 lbsmanually operated type or equipped G ANSI 4\"/300 lbswith a pneumatic actuator. SealsTECHNICAL SPECIFICATIONS 0 PTFE + 20C + 5Gr (std.) 1 PTFE 100%Transmitter connection 4 PTFE + 20C + 5Gr / AISI316 / PTFE 50 % (Hard)M45x2 female thread, suitable for 5 PTFE 100% / AISI316 / PTFE 50% (Hard)SATRON VL- and VDtL-transmitters and 6 PTFE 100% / PVDF 100% (Hard)for Satron HPS hydraulic pressure seals. Pt100 Temperature transmitterMax. operating pressure/temperature 0 No sensorPressure 40 bar, temperature 250 °C, X With sensor (-50...+200 °C)(see the appended table).Min. operating temp. -50 °C. Actuator Pressure/Temperature curve MD No actuator (manually operated) AE1 Electric actuator 230 V bar AD_ Double-action actuator AE3 Electric actuator 115 V 40 PN40/ANSI300lbs AS_ Spring-return actuator A0 No actuator, fittings to the 30 actuator 20 ANSI150lbs Solenoid valve type (for codes AD and AS only) 10 0 _ No solenoid valve 4 _ 28 V DC 0.4 W (only EEx ia) 1 _ 230 V AC 50 Hz 2 W (std.) 2 _ 24 V DC 2.5 W (also EEx dm) 3 _ 115 V AC 60 Hz 2 W Solenoid explosion proof 0 No explosion proof 3 EEx dm IIC T5/T6 1 EEx m II T4 2 EEx ia IIC T6 Position switches A Position switch EEx ib IIC T5/T6 0 None X Equipped with position switches E Position switch NAMUR, DIN 19234 Options Z4 Cutting ball Z1 Oxygen wash Z5 Diamond-coated ball Z2 Process side flushing Dokumentit IF Finnish IE English Material certificates MC2 SFS-EN 10204-2.2 (DIN50049-2.2) 0 No material certificate MC3 SFS-EN 10204-3.1B (DIN50049-3.1B) MC1 SFS-EN 10204-2.1 (DIN50049-2.1) Specification example: PASVE BA FD200AD10XIEMC1 -50 0 50 100 150 200 250°C WORKING POSITIONS 1. 2.Materials 1. Transmitter inWetted parts : AISI316L, AISI904L, Duplex, measuringHastelloy C276, Titanium, 254 SMO.Seals: PTFE, PTFE with carbon and 2. Transmitter can begraphite filling or PTFE 50%+AISI316 50% checked, changed,mixture calibrated or theWeight transmitter diaphragmPASVE BA C 4,3 kg, PASVE BA P 4,2 kg, can be flushedPASVE BA F 8,4 kg, Actuator 5,5 kg Satron Instruments Inc., P.O.Box 22, FI-33901 Tampere, Finland Tel. + 358 207 464 800, Telefax +358 207 464 801 www.satron.com

Index 82

Index 83

Index 84

Index 85 G345 SATRON PASVE pH Mounting & Service Valve 01.11.2015 OPERATING POSITIONS 1/4-NPSF 1/4-NPSFPASVE® pH is a mounting/service Measuring positionvalve for pH sensors. It can be used Sensor in measurement. Valve's andwith practically all pH sensors in this sensor's water cooling through flushingsize category. channel.PASVE® pH allows the cleaning andcalibration of pH sensors without Cleaningstopping the process. When required, solutionthis can be done automatically. Toprotect the sensor in abrasive Servicing and calibration positionprocesses, it can be turned to the Sensor turned to cleaning, calibrating andmeasuring position only for the protective position without stoppingduration of the actual measurement. the process.PASVE® pH is available in a manuallyoperated type or equipped with apneumatic or electric actuator.TECHNICAL SPECIFICATIONSApplicable pH sensorsRefer to the Selection Table.Max. operating pressure/temperature40 bar, 250 °C, (see the appendedtable). Min. operating temp. -50°C.Sensor-specific limitations shouldalso be taken into account inapplications.Pressure/Temperature curve bar PN40/ANSI300lbs 403020 ANSI150lbs10 PVDF PN10 -50 0 50 100 150 200 250°C Pasve pH manual operation Pasve pH automatic operation with actuator PVDF curve is valid in water and other clean liquids Spring return, double action, and electric actuator are available. Automatic operation provides manyMaterials added benefits.Wetted parts: AISI316L, AISI904L,Titanium, Hastelloy® C276, Duplex, Hastelloy is the registered trademark254 SMO® and for type F PVDF. of Haynes International.Seals: PTFE, PTFE with carbon andgraphite filling or PTFE 50%+AISI316 We reserve the right for technical modifications 254 SMO is the registered trademark50% mixture without prior notice. of Outokumpu Stainless Inc.Weight Pasve is the registered trademarkPASVE pHC 4.7 kg, PASVE pHP 4.8 kg, of Satron Instruments Inc.PASVE pHF 8.9 kg,Actuator 5.5 kg Satron Instruments Inc., P.O.Box 22, FIN-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 86 G345 SATRON PASVE pH Mounting & Service Valve 01.11.2015PASVE pHF Pasve pH with pneumatic actuator PASVE pHP(Flange type) (Shape the body PASVE pHC to be suitable to L 55 (Welded on the pipe, welded) A container or ) 66 ØD Ød 41306 250 Ø127 Ø115 6.5 Ø70 PASVE pHF 270 FLANGE ØD Ød A 400 (type AS) Code Type 172 139.7 22PASVE pHB K ANSI 2½\" 150 lbs 191 152.4 22(Welded on container or A ANSI 3\" 150 lbs 210 168.3 27vertical pipe, body 15º) B ANSI 3\" 300 lbs 229 190.5 26 H ANSI 4\" 150 lbs 254 200 29 L G ANSI 4\" 300 lbs 165 125 20 31 T DN50 PN40 200 160 22 D DN80 PN40 220 180 22 J DN100 PN10/16 235 190 26 C DN100 PN40 185 150 20 E JIS10K 80 210 170 30 F JIS40K 80 PASVE pHT PASVE pHD (Flow-through, (Flow through, threaded connection) flange connection) 306 250 Ø115 BL W306 250 Ø140 M10/15L depends on the sensor type 400 (type AS) 230 270 54 300 H K ØDPASVE pHD W ØD H PASVE pHT BH 55 108 48 FLANGE 55 124 48 THREAD 77 48 Code Type 68 153 76 Code Type (dim.K) 92 64 68 165 76 104 76 H ANSI 1\" 150 lbs 55 115 48 2 1\" - NPT J ANSI 1\" 300 lbs 68 165 76 4 1.5\" - NPT U ANSI 2\" 150 lbs 5 2\" - NPT V ANSI 2\" 300 lbs G DN25 PN40 T DN50 PN40Dimensions (in mm)

Index 87 G345SATRON PASVE pH Mounting & Service Valve 01.11.2015Sensor connection Standard sensor connection PG13.5 / Ø12 mm / length 120 mm Code dimension R S R < 30 mm M R < 20 mm R Ref. L R < 10 mmSpecial sensor connection typesCode SensorA1 Satron S508A2 in-line Satron S508 (manual only)B1 Broadley-James Dynaprobe IIB2 Broadley-James S410B3 Broadley-James DynaProbe ST856C1 Honeywell Durafet II, smooth tipC2 Honeywell Meredian II and Durafet II guarded tipD1 Barben 546/556, flat glass, 38 mm insertion depthD4 Barben 551/561, flat glass, actual insertion depth 3.94\"D6 in-line Barben 551/561, flat glass, 100 mm insertion depth (manual only)E1 E+H CPF81, guarded tip, machinedE2 E+H CPF81 -flat glass, machinedE3 E+H CPF81/82, guarded tip, not machinedE4 E+H CPF81, flat glass, not machinedF1 Foxboro 871AF2 Foxboro 871pHF3 Foxboro PH10-3F4 Foxboro PH10-2F5 in-line Foxboro PH10-2 (manual only)G1 Lange (GLI) PD1P1.99G2 Lange (GLI) DPD1P1.99H1 Hamilton Inchtrode N75PH2 Hamilton Inchtrode N75FI1 Teledyne Isco 701pHK1 Kemotron 4835 and 4837 UPWO2 Orbisphere (31110)P1 Polymetron 8350/51R1 Rosemount 389R2 Rosemount 385+R4 Rosemount TUpH 396/396VP, 398/398VPR5 in-line Rosemount TUpH Combination 396P/PVP (manual only)R6 Rosemount TUpH Combination 396P/PVPR9 Rosemount 3300HT/HTVPRA Rosemount 3500P/VPRB Rosemount RB-546RC Rosemount 3900/ 3900VPT1 ABB TB556, flat glass, 38 mm insertion depthT2 ABB TB557, flat glassT3 ABB TB564, flat glassT4 ABB TB561 / Barben 551/561, flat glass, 100 mm insertion depthT5 in-line ABB TB564 (manual only), flat glassT6 in-line ABB TB561 (manual only), flat glass, 100 mm insertion depthT7 ABB TB556, flat glass, 28 mm insertion depthY1 Yokogawa FU20 - - NPT (guarded tip)Surface temperature European Directive Information Ambient temperature Temperature class ATEX directive (94/9/EC) °C Satron Instruments Inc. complies with the ATEX directive. 70 T6 85 T5 European Pressure Equipment Directive (PED) (97/23/EC) 120 T4 - Sound Engineering Practice European Certification: II 3 GD

Index 88 G345SATRON PASVE pH Mounting & Service Valve 01.11.2015Selection TablePASVE pH Wetted parts (C, B and P)Mounting type Code MaterialC On container or horizontal pipe , welded 2 AISI316L (EN 1.4404), std.B On container or vertical pipe, body 15º, welded 3 Hastelloy® C276 (EN 2.4819)P Shape the body to be suitable to the pipe, welded 4 AISI904L (EN 1.4539)F On flange 6 Titanium Ti-2 (EN 3.7035)T Flow-through, threaded connection 8 Duplex (EN 1.4462)D Flow-through, flange connection K 254 SMO®Process connection type, specified for mounting type FFlanges Flanges Wetted parts Code MaterialCode Type Code Type 2 AISI316L (EN 1.4404)T DN50 PN40 A ANSI 3\"/150 lbs 3 Hastelloy® C276 (EN 2.4819) 4 AISI904L (EN 1.4539) (only manual using) B ANSI 3\"/300 lbs 6 Titanium Ti-2 (EN 3.7035) 8 Duplex (EN 1.4462)D DN80 PN40 H ANSI 4\"150 lbs K 254 SMO® P1 PVDF PN10J DN100 PN10/16 G ANSI 4\"/300 lbs (P1 only for flange codes D,A,E)C DN100 PN40 E JIS 10K 80 Wetted parts Code MaterialK ANSI 2½\"/150 lbs F JIS 40K 80 2 AISI316L (EN 1.4404) 3 Hastelloy® C276 (EN 2.4819) (only manual using) 4 AISI904L (EN 1.4539) 6 Titanium Ti-2 (EN 3.7035)Process connection type, specified for mounting type T 8 Duplex (EN 1.4462) Threads K 254 SMO®Code Type2 1” - NPT4 1.5”- NPT5 2” - NPTProcess connection type, specified for mounting type D Flanges Flanges Wetted partsCode Type Code Type Code MaterialG DN25 PN40 U ANSI 2\"/150 2 AISI316L (EN 1.4404)M DN40 PN40 V ANSI 2\"/300 3 Hastelloy® C276 (EN 2.4819)T DN50 PN40 K JIS 10K 25 4 AISI904L (EN 1.4539)H ANSI 1\"/150 R JIS 10K 40 6 Titanium Ti-2 (EN 3.7035)J ANSI 1\"/300 S JIS 10K 40 8 Duplex (EN 1.4462)N ANSI 1.5\"/150 X JIS 10K 50 K 254 SMO®P ANSI 1.5\"/300 L JIS 40K 25 Y JIS 40K 50Seals0 PTFE + 20C + 5Gr / FPM (std.) 4 PTFE + 20C + 5Gr / FPM+AISI316 / PTFE 50 % (Hard)1 PTFE 100% / FPM 5 PTFE 100% / FPM+AISI316 / PTFE 50% (Hard)2 PTFE +20C+5Gr / FFPM 6 PTFE 100% / FPM + PVDF 100% (Hard)3 PTFE 100% / FFPM 7 PTFE + 20C + 5Gr / EPDM 8 PTFE 100% / EPDMSensor connectionSensor connection types, see page 3Pt100 temperature sensor0 No sensorX With sensor (Measuring range -50 ... +200°CActuator AE1 Electric actuator 230 V 50 HzMD No actuator (manually operated AE3 Electric actuator 115 V 60 HzAD Double-action actuator A0 No actuator, fittings to the actuatorAS Spring-return actuatorSolenoid for actuator (only for actuator types AD and AS)0 No solenoid valve 2 24 V DC 2.5 W (also EEx dm) 4 28 V DC 0.4 W (EEx ia)1 230 V AC 50 Hz 2 W (as standard) 3 115 V AC 60 Hz 2 WSolenoid explosion proof 2 EEx ia IIC T6 (only 28V)0 No explosion proof 3 EEx dm IIC T5/T6 (only 24V)1 EEx m II T5Position switches A Position switch EEX ib IIC T5/T60 NoneX Equipped with position switchesE Position switch NAMUR, DIN 19234Special optionsZ1 For oxygen use Z4 Cutting ball Z5 Diamond-coated ballZ2 Process side flushing Z7 Process side flushing through the ball, only Ø12 / L = 120mm sensorsZ3 Actuator (AS) reverse action Material certificatesDocumentation 0 No material certificateInstallation and operating instructions MC1 SFS-EN 10204-2.1 (DIN50049-2.1)IE English MC2 SFS-EN 10204-2.2 (DIN50049-2.2)IF Finnish MC3 SFS-EN 10204-3.1B (DIN50049-3.1B)Specification example: PASVE pH D U2 0 O2 X AD3 1 E Z1 IEMC1

Index 89

Index 90

Index 91 G365 SATRON PASVE DUAL Mounting & Service Valve 01.07.2010 PASVE DUAL B PASVE DUAL T PASVE DUAL D (Welded on container or (Flow-through, (Flow through, vertical pipe, body 15º) threaded connection) flange connection) L 306 31 250 Ø115 BL W306 250 Ø140L depends on the sensor type M10/15 400 (type AS) 230 270 54 300PASVE DUAL D K H ØD FLANGE W ØD H PASVE DUAL T BH Code Type 55 108 48 77 48 H ANSI 1\" 150 lbs 55 124 48 THREAD 92 64 J ANSI 1\" 300 lbs 68 153 76 Code Type (dim.K) 104 76 U ANSI 2\" 150 lbs 68 165 76 V ANSI 2\" 300 lbs 55 115 48 2 1\" - NPT G DN25 PN40 68 165 76 4 1.5\" - NPT T DN50 PN40 5 2\" - NPTDimensions (in mm)Surface temperature European Directive InformationAmbient temperature Temperature class ATEX directive (94/9/EC) °C Satron Instruments Inc. complies with the ATEX directive. 70 T6 85 T5 European Pressure Equipment Directive (PED) (97/23/EC) 120 T4 - Sound Engineering Practice European Certification: II 3 GDSensor connectionCode SensorA Standard sensor connection PG13.5 / Ø12 / length 120 mm

Index 92SATRON PASVE DUAL Mounting & Service Valve G365 01.07.2010Selection TablePASVE DUAL Wetted parts (C, B and P)Mounting typeC On container or horizontal Code Material none AISI316L (std.)pipe , welded Hastelloy® C276 3 AISI904LB On container or vertical pipe, 4 Titanium Duplex (EN 1.4462)body 15º, welded 6 254 SMO® 8P Shape the body to be Ksuitable to the pipe, weldedF On flangeT Flow-through, threaded connectionD Flow-through, flange connectionProcess connection type, specified for mounting type F Wetted parts FlangesFlanges Code Material 2 AISI316LCode Type Code Type 3 Hastelloy® C276T DN50 PN40 (only H ANSI 4\"150 lbs 4 AISI904L G 6 TitaniumD manual using) E ANSI 4\"/300 lbs 8 Duplex (EN 1.4462)J DN80 PN40 F JIS 10K 80 K 254 SMO®CA DN100 PN10/16 JIS 40K 80B DN100 PN40 ANSI 3\"/150 lbs ANSI 3\"/300 lbsProcess connection type, specified for mounting type TThreads Wetted parts Code MaterialCode Type 2 AISI 316L2 1” - NPT 3 Hastelloy® C2764 1.5”- NPT 4 AISI904L5 2” - NPT 6 Titanium 8 Duplex (EN 1.4462)Process connection type, specified for mounting type D K 254 SMO®Flanges Flanges Wetted partsCode Type Code Type Code MaterialG DN25 PN40 U 2 AISI316LM V ANSI 2\"/150 3 Hastelloy® C276T DN40 PN40 K 4 AISI904LH DN50 PN40 R ANSI 2\"/300 6 TitaniumJ S JIS 10K 25 8 Duplex (EN 1.4462)N ANSI 1\"/150 X K 254 SMO®P ANSI 1\"/300 L JIS 10K 40 Y JIS 10K 40 ANSI 1.5\"/150 ANSI 1.5\"/300 JIS 10K 50 JIS 40K 25 JIS 40K 50Seals 4 PTFE + 20C + 5Gr / FPM+AISI316 / PTFE 50 % (Hard)0 PTFE + 20C + 5Gr / FPM (std.) 5 PTFE 100% / FPM+AISI316 / PTFE 50% (Hard)1 PTFE 100% / FPM 6 PTFE 100% / FPM + PVDF 100% (Hard)2 PTFE +20C+5Gr / FFPM3 PTFE 100% / FFPMSensor connectionA PG13,5 / Ø12 / 120 mmPt100 temperature sensor0 No sensorX With sensor (Measuring range -50 ... +200°CActuator AE1 Electric actuator 230 V 50 HzMD No actuator (manually operated AE3 Electric actuator 115 V 60 HzAD Double-action actuator A0 No actuator, fittings to the actuatorAS Spring-return actuatorSolenoid for actuator (only for actuator types AD and AS)0 No solenoid valve 2 24 V DC 2.5 W (also EEx dm) 4 28 V DC 0.4 W (EEx ia)1 230 V AC 50 Hz 2 W (as standard) 3 115 V AC 60 Hz 2 WSolenoid explosion proof0 No explosion proof 2 EEx ia IIC T6 (only 28V)1 EEx m II T5 3 EEx dm IIC T5/T6 (only 24V)Position switches A Position switch EEX ib IIC T5/T60 NoneX Equipped with position switchesE Position switch NAMUR, DIN 19234Special optionsZ1 For oxygen use Z5 Diamond-coated ballZ2 Process side flushing Material certificatesZ3 Actuator (AS) reverse action 0 No material certificateDocumentation MC1 SFS-EN 10204-2.1 (DIN50049-2.1)Installation and operating instructions MC2 SFS-EN 10204-2.2 (DIN50049-2.2)IE English MC3 SFS-EN 10204-3.1B (DIN50049-3.1B)IF FinnishSpecification example: PASVE DUAL C 2 0 A X AD3 1 E Z5 IEMC1

Index 93

Index 94

Index 95

Index 96

Index 97 G347PASVE SC/SF/SH/SP/ST Sampling Valve 01.07.2015The PASVE® SC/SF/SH/SP/ST is a miniature ball valve which readily accepts Changing thecommercially available septum hygienic rubbers. The PASVE® SC/SF/SH/ rubber septumSP/ST provides you with the opportunity of taking hygienic samples fromyour process without interrupting the process.The PASVE® SC/SF/SH/SP/ST can be used in any industrial process whereit is necessary obtain a sample from the process which is not in uenced orcontaminated from any outside disturbances.The PASVE® SC/SF/SH/SP/ST is a member of the Satron PASVE® Series,which is commonly used with pH probes, oxygen sensors and Satron's highprecision patented pressure and level transmitters.Technical SpecificationsMaterialHousing: AISI316LGasket: PTFE / Silicone rubber sealMax. process pressure:10 bar (150 psi)(subject to type of rubber septumselected)Max. process temperature:120 °C (250 °F) (subject to type ofrubber septum selected) Operation Taking a sample Position of taking a sample PROCESS We reserve the right for technical modifications without prior notice. PASVE is the registered trademark of Satron Instruments Inc. Satron Instruments Inc., P.O.Box 22, FIN-33901 Tampere, Finland Tel. +358 207 464 800, Telefax +358 207 464 801, www.satron.com

Index 98 G347PASVE SC/SF/SH/SP/ST Sampling Valve 01.07.2015 PASVE SC PASVE SC - 10 PASVE SP PASVE SH PASVE ST PASVE SF - Tri-Clamp, sizes - Tuchenhagen, sizes - Flange SF D110 DN25/DN38 and DN25/DN32 and APV-FN1-50 DN40/51 DN40/DN50 - Flange SF D110Dimensions (in mm) 4,3 4 x 90° Ø11 PASVE SF 2 Ø90 - Flange SF D110 - Outer diameter of 10 10 flange is 110 mmPASVE SF Ø55,35 4 x 90° Ø11- Flange SF D110 Ø64 Ø70,6 APV-FN1-50 Ø90- Outer diameter of flange is 110 mm

Index 99 G347 PASVE SC/SF/SH/SP/ST Sampling Valve 01.07.2015 Dimensions (in mm)SC = 5,5 SC-10 = 10 57 Ø40 DN25/38 = Ø50,585 DN40/50 = Ø64 PASVE SC PASVE SH (Tri-Clamp) and SC - 10 - Sizes DN25/38 and DN40 / 51 Ø68 Ø50 Ø71 Ø53 Ø84 Ø66PASVE ST (Tuchenhagen) PASVE ST (Tuchenhagen)- Size DN40 / 50 - Size DN25 / 32 PASVE SPØ25

Index 100 G347 PASVE SC/SF/SH/SP/ST Sampling Valve 01.07.2015 Upgrade kit Order code Part no. Part name V10103004 3 Bearing T1010344 5 Special nut V T1010342 6 Valve ball V T1010343 8 Valve body LV V10103012 11 Gasket 80001101 13 O-ring Ø11,3 x 2,4 NBR V10103014 14 Rubber septum T1010331 21 Rubber seal M1010043 Upgrade kit, assemblyProtection kit Part no. Part name Order code 1 Pull-out sleeve T1010338 2 Spring T1010341 3 Locking sleeve T1010339 4 Retaining screw M4x4 DIN916 A4 53002440 Protection kit 2, assembly M1010042