Barrier Group 2018 Product & Services Guide

Let us share the load....BARRIER GROUP – 2018 Product & Services Guide version 11 © Copyright 2018

....before someone gets hurt?

On Site Consultation• Site safety audits and trouble shooting.• Traffic plans for pedestrian and vehicle control.• Compliance to relevant standards.• Design and installation advice.

Factory Backed Installations• Skilled factory trained and supported tradesmen.• Full site measure, build and installation service.• Guaranteed workmanship with courtesy follow up.• Relevant industry tickets and $20 million insurance.

Ground Penetrating Radar (GPR)• Locations for electrical, gas and water services.• Latest underground cable locator technology.• Avoid expensive disruption during excavations.• Locate in-slab services prior to core drilling or cutting.

Concrete Sawing• Horizontal diamond road sawing to a depth of 400mm.• Petrol demo/hand sawing to 150mm for tight access works.• Expansion joint cuts, trench cutting, curb cutting.• Scan/Cut/Install. A complete one stop shop.

Earthworks and Concrete Removal• 5.5 tonne excavator with 300/450/600 and 1200 buckets.• Demolition grabs and ripping attachments.• Case skid steer loader with 4/1 bucket.• Mercedes Benz 10 cubic metre tipper and plant trailer.

Auger Post Hole Drilling• Auger drilling at 300, 450 and 600mm diameter.• Drilling depth down to 5 metres at 450 diameter.• Fast, accurate and makes light work of digging post holes.• Ticketed operator with over 30 years of experience.

Core Drilling• Vertical or horizontal core drilling.• Drilling capacity from 16mm to 400mm in diameter.• Water recovery units for indoor drilling.• Over 20 years of experience with core drilling.

Line Marking Services• Line marking for car parks and warehouses.• Highlighting vehicle/pedestrian separation.• Designating forklift loading areas and exclusion zones.• Stencilling and hazard identification.

Industrial Design• Control of the design process from concept to completion.• In-house industrial design professionals.• Ability to quickly modify existing products or create new ones.• State-of-the-art professional 3D printer for rapid prototyping.

Custom Fabrication• CNC brake press 140 tonne capacity to 3 metres long.• Plate guillotining to 6.5mm x 3 metres in length.• Mig, tig and arc welding .• Experienced team of manufacturing tradesmen.

Pipe Bending and Rolling• Rotary draw bending of heavy black pipe up to 80nb.• Continuous radius roll bending of pipe and steel profiles.• Fabrication of rolled or bent materials into finished products.• Mild steel, stainless steel and aluminium tube and pipe.

Gal Plus Double Bollards Neata Belt 08 85 Magna-PostSkinz Sleeves 06 144 PilotMezzanine Humpback Lane SystemRoll-Over Gate  Separator 136 7258Corner HoopProtectors Bollards157 12 Access Ramps 145Pit Surround 113 Plastic Fences 54

Pilot Wall Mount Linebacker Bollards and U-Bars 74 Bollards Shock 20 02-29Absorbing Bollards Fence and Rail Systems 16 30-55 Stackable Neata Industrial Gates 85 56-69 Queue Management 70-105Wall Mount Heavy Duty Expandable Barriers Bike Rack Dock Ramp 167 154 106-113 Smart Cart  19 Vehicle and Parking Column Cushion 152 114-147 Bumpers and Buffers 148-161Truck Stops Street Hardware 123 162-173 Stair Nosings Underfoot 180 174-189 Factory and Warehouse 190-205Tactiles 176 Product Index Plastic Ramps 206-210 184

Bollards provide safety, security and assetprotection. Some are designed to restrictunauthorised vehicle access while othersadd value to the architectural aesthetics.Manufactured from materials such as castaluminium, 316 stainless steel and galvanisedsteel with or without powder coating. All canbe supplied for installation by others or wecan provide a full site evaluation, design andinstallation service if required.

BOLLARDS AND U-BARS

The Zephyr is so much more than just a bollard... It’s an architectuRal statement CA B PART No. A B C KG FINISHZephyr Architectural Bollard BZ-POL 845 224 394 18 Polished alloyWinner of the prestigious A’Design Platinum Award for BZ-CUS 845 224 394 18 Custom powder coatStreet Furniture in Como, Italy 2015, the Zephyr isequally at home as an architectural bollard or a designer BZF-SM Zephyr mounting kit – Surface mountbike rack. It was designed at our Geelong manufacturing KIT20 Fixing kit for zephyr – In-groundfacility and cast in Melbourne from Australian sourcedaluminium. Note: All dimensions in mm – (A) Height, (B) Width, (C) Depth.04 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Round Bollards 12 3316 Stainless SteelMarine grade stainless steel offers a high level ofperformance in harsh locations, including where therewill be exposure to salt air. The polished surfaces andmachine finished flat caps present an aestheticallypleasing finish in architectural environments.Optional spun covers are available for surfacemounted models to conceal mounting hardware.style PART No. A B C D E F Kgs FINISH RKIT-SS Chain ring kit (optional)1 C90SM-SS 90 900 – 3.05 6 225 7.4 SS2 C90BG-SS 90 900 300 3.05 – – 8 SS3 C90CD-SS 90 900 200 3.05 – – 7.4 SS1 C140SM-SS 140 1200 – 3.4 10 300 19 SS2 C140BG-SS 140 1200 500 3.4 – – 25 SS3 C140CD-SS 140 1200 200 3.4 – – 22 SS1 C168SM-SS 168 1300 – 3.4 10 350 26.5 SS2 C168BG-SS 168 1300 500 3.4 – – 31 SS3 C168CD-SS 168 1300 300 3.4 – – 29 SS+ COV90-SS Base cover to suit 90mm bollard – 316 stainless steel (optional)+ COV140-SS Base cover to suit 140mm bollard – 316 stainless steel (optional)+ COV168-SS Base cover to suit 168mm bollard – 316 stainless steel (optional)+ rkit-SS Stainless steel chain ring kit 2 x M10 eye bolts+ ssC6 Stainless steel chain per metreNote: All dimensions in mm – (A) Bollard diameter, (B) Height above ground, (C) Depthbelow ground, (D) Wall thickness, (E) Base plate thickness, (F) Base plate diameter.Finish: 316 Stainless Steel (SS). Anchoring BarsCopyright © 2018 Barrier Group Pty. Ltd. ••• 05

3 4Skinz One-Piece Bollard Sleeves 2 1Say no more to ugly, scratched or rusting bollards!Our tough moulded polyethylene sleeves offer improvedimpact resistance and cost less than prepping andrepainting old bollards. Skinz are available in a rangeof sizes that fit most common bollard sizes and brands.Fitting takes seconds and they can be cut down tosuit different bollard heights. Reflective tape kits areavailable on request.Flip over to page 8 for our Gal-Plus Bollards with Skinz.style PART No. DESCRIPTION Yellow Skinz supplied as standard. Other colours 1 SKZ105-Y Skinz bollard sleeve to suit up to 105mm diameter – Safety Yellow available on request (minimum quantities apply). 2 SKZ145-Y Skinz bollard sleeve to suit up to 145mm diameter – Safety Yellow 3 SKZ175-Y Skinz bollard sleeve to suit up to 175mm diameter – Safety Yellow Shown with optional Red reflective tape kits. 4 SKZ225-Y Skinz bollard sleeve to suit up to 225mm diameter – Safety Yellow + KITRT25-R Reflective tape kit to suit SKZ105 – 25mm Red Copyright © 2018 Barrier Group Pty. Ltd. + KITRT50-R Reflective tape kit to suit SKZ145 & SKZ175 – 50mm Red + KITRT75-R Reflective tape kit to suit SKZ225 – 75mm Red06 •••

Maintenance InstallationSkinz cost way less to install than preparing and painting Skinz are supplied with everything you need and canexisting damaged bollards – and you only have to do be fitted to most bollards in seconds using nothingit once. more than a hand-saw if cutting to length is required.Skinz Range Soft ProtectionSkinz come in four sizes with 3mm wall thickness. Skinz offer soft protection for vehicle doors or lightThey can be retrofitted to any brand of bollard from impacts in shopping centre carparks that you don’t90 to 220mm diameter. Reflective tape kits available. get with plain steel bollards.Copyright © 2018 Barrier Group Pty. Ltd. ••• 07

Gal-Plus Bollards 12Heavy Duty Steel with Skinz ReflectiveFor around the same price as standard powder coated tape kitsbollards, you can now have our heavy duty hot dip (optional)galvanised Gal-Plus bollards.Gal-Plus bollards are fitted with Skinz polyethylene Yellow Skinz supplied assleeves, ensuring you will never have to bother with standard on Gal-Plus.painting over rust again. Other colours availableGal-Plus bollards fitted with Skinz are ideal for on request (minimumcongested car parks as they can reduce the impact quantities apply).damage caused to vehicles when they come intocontact with bollards. Likewise in shopping centres,maintenance to damaged bollards caused by shoppingtrolleys can be virtually eliminated.Learn more about our Skinz polyethylene sleeves onpages 6-7.style PART No. A* B C D E F Kgs FINISH1 C90SM-SKZY 90 1000 – 5 225 6 11.3 HDG+PS2 C90BG-SKZY 90 1000 380 5 – – 13.5 HDG+PS1 C140SM-SKZY 140 1200 – 5 300 10 25.4 HDG+PS2 C140BG-SKZY 140 1200 500 5 – – 29.7 HDG+PS1 C165SM-SKZY 165 1300 – 5 350 10 34.7 HDG+PS2 C165BG-SKZY 165 1300 650 5 – – 40.5 HDG+PS1 C220SM-SKZY 220 1300 – 6.4 400 12 49.2 HDG+PS2 C220BG-SKZY 220 1300 650 6.4 – – 66.9 HDG+PS+ KITRT25-R Reflective tape kit to suit SKZ105 – 25mm Red+ KITRT50-R Reflective tape kit to suit SKZ145 & SKZ175 – 50mm Red+ KITRT75-R Reflective tape kit to suit SKZ225 – 75mm RedNote: All dimensions in mm – (A) Bollard diameter, (B) Height above ground, (C) Depthbelow ground, (D) Wall thickness (+Skinz 3mm), (E) Base plate diameter, (F) Baseplate thickness. Finish: Hot Dip Galvanised (HDG) and Polyethylene Skinz (PS).*Refers to the diameter of the actual bollard. Skinz sleeve may add up to 20mm in dia.08 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Round Bollards 1 2Heavy Duty Steel RKIT-GHeavy duty steel bollards with wall thicknesses ranging Chain ring kitfrom 5 to 6.4mm for tough environments. All our steel (optional)bollards come hot dip galvanised and are availablewith or without powder coated surface finishes.Cast aluminium caps and reflective bands are includedwhile optional chain ring kits are available on request.style PART No. A B C D E F Kgs FINISH1 C90SM-G 90 1000 – 5 225 6 9 HDG2 C90bg-G 90 1000 380 5 – – 12 HDG1 C90SM 90 1000 – 5 225 6 9 HDG+PC2 C90BG 90 1000 380 5 – – 12 HDG+PC1 C140SM-G 140 1200 – 5 300 10 23 HDG2 C140BG-G 140 1200 500 5 – – 29 HDG1 C140SM 140 1200 – 5 300 10 23 HDG+PC2 C140BG 140 1200 500 5 – – 29 HDG+PC1 C165SM-G 165 1300 – 5 350 10 34 HDG2 C165BG-G 165 1300 650 5 – – 40 HDG1 C165SM 165 1300 – 5 350 10 34 HDG+PC2 C165BG 165 1300 650 5 – – 40 HDG+PC1 C220SM-G 220 1300 – 6.4 400 12 45 HDG2 C220BG-G 220 1300 650 6.4 – – 53 HDG1 C220SM 220 1300 – 6.4 400 12 45 HDG+PC2 C220BG 220 1300 650 6.4 – – 53 HDG+PC+ RKIT-G Galvanised steel chain ring kit 2 x M10 eye boltsNote: All dimensions in mm – (A) Bollard diameter, (B) Height above ground, (C) Depthbelow ground, (D) Wall thickness, (E) Base plate diameter, (F) Base plate thickness.Finish: Hot Dip Galvanised (HDG) only/and Powder Coated (PC).Copyright © 2018 Barrier Group Pty. Ltd. Anchoring Bars ••• 09

Round Bollards 1 2Economy Steel RKIT-GEconomy steel bollards are designed for situations where Chain ring kitcost is a factor and conditions are not so challenging. (optional)All our steel bollards come hot dip galvanised and areavailable with or without powder coated surface finishes. AnchoringBlack plastic caps and reflective bands are included while Barsoptional chain ring kits are available on request.style PART No. A B C D E F Kgs FINISH 1 C63SMe-G 63 1000 – 1.6 150 6 3.7 HDG 2 C63bge-G 63 1000 200 1.6 – – 3.7 HDG 1 C63SMe 63 1000 – 1.6 150 6 3.7 HDG+PC 2 C63BGe 63 1000 200 1.6 – – 3.7 HDG+PC 1 C90SMe-G 90 1000 – 3.2 200 6 8.2 HDG 2 C90bge-G 90 1000 300 3.2 – – 8.8 HDG 1 C90SMe 90 1000 – 3.2 200 6 8.2 HDG+PC 2 C90BGe 90 1000 300 3.2 – – 8.8 HDG+PC 1 C114SMe-G 114 1000 – 3 250 6 11 HDG 2 C114BGe-G 114 1000 300 3 – – 12.8 HDG 1 C114SMe 114 1000 – 3 250 6 11 HDG+PC 2 C114BGe 114 1000 300 3 – – 12.8 HDG+PC 1 C140SMe-G 140 1200 – 3.5 250 8 18.4 HDG 2 C140BGe-G 140 1200 300 3.5 – – 18.7 HDG 1 C140SMe 140 1200 – 3.5 250 8 18.4 HDG+PC 2 C140BGe 140 1200 300 3.5 – – 18.7 HDG+PC + RKIT-63 Galv. steel chain ring kit to suit 63mm bollards 2 x M10 eye bolts + RKIT-G Galvanised steel chain ring kit 2 x M10 eye boltsNote: All dimensions in mm – (A) Bollard diameter, (B) Height above ground, (C) Depthbelow ground, (D) Wall thickness, (E) Base plate diameter, (F) Base plate thickness.Finish: Hot Dip Galvanised (HDG) only/and Powder Coated (PC).10 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Square Bollards 12Heavy Duty Steel RKIT-GHeavy duty steel square bollards with a 5mm wall Chain ring kitthickness for tough environments. All our steel (optional)bollards come hot dip galvanised and are availablewith or without powder coated surface finishes.Cast aluminium caps and reflective bands are includedwhile optional chain ring kits are available on request.style PART No. A B C D E F Kgs FINISH1 Cs90SM-G 90 1000 – 5 200 6 12.75 HDG2 CS90bg-G 90 1000 400 5 – – 16.5 HDG1 CS90SM 90 1000 – 5 200 6 12.75 HDG+PC2 CS90BG 90 1000 400 5 – – 16.5 HDG+PC1 CS150SM-G 150 1200 – 5 300 10 32 HDG2 CS150BG-G 150 1200 500 5 – – 38 HDG1 CS150SM 150 1200 – 5 300 10 32 HDG+PC2 CS150BG 150 1200 500 5 – – 38 HDG+PC+ RKIT-G Galvanised steel chain ring kit 2 x M10 eye boltsNote: All dimensions in mm – (A) Square, (B) Height above ground, (C) Depth belowground, (D) Wall thickness, (E) Base plate diameter, (F) Base plate thickness.Finish: Hot Dip Galvanised (HDG) only/and Powder Coated (PC). Anchoring BarsCopyright © 2018 Barrier Group Pty. Ltd. ••• 11

Galvanised Hoop Bollards 1 2Heavy Duty Steel Below GroundHoop Bollards are rolled from a single piece of heavy wall Installationpipe and are available at either 600 or 900mm wide models.Choose from three mounting options; fixed surface mount, Copyright © 2018 Barrier Group Pty. Ltd.fixed in-ground or removable in-ground. For removable models,there are two in-ground lockable sleeve options; core drilled(for existing concrete) or new concrete. Hot dip galvanised isthe standard finish but they can be powder coated in variouscolours on request (charges will apply).style PART No. A B C D E F G CLR Kgs FINISH1 CH9050SM-g 90 600 1100 – 5 225 6 250 31.4 HDG2 CH9050BG-g 90 600 1100 300 5 – – 250 28 HDG3 CH9050SL-g 90 600 1100 225 5 – – 250 29 HDG4 CH9081SM-g 90 900 1100 – 5 225 6 405 29.8 HDG5 CH9081BG-g 90 900 1100 300 5 – – 405 33.2 HDG6 CH9081SL-g 90 900 1100 225 5 – – 405 31.2 HDG7 BSL90S-NC New concrete sleeve for 90mm hoop bollard – 2 required8 BSL90S-CD Core drilled sleeve for 90mm hoop bollard – 2 required9 BPL2 High security 9mm shielded padlock with 2 keysNote: All dimensions in mm – (A) Post diameter, (B) Overall unit width, (C) Height above ground,(D) Depth below ground, (E) Wall thickness, (F) Base plate diameter, (G) Base plate thickness,(CLR) Centreline radius. Finish: Hot Dip Galvanised (HDG). Surface Mount Installation12 •••

3 456 Powder coated colours available on request. Charges will apply. Removable In-ground 9 Installation Surface Mount 7 InstallationCopyright © 2018 Barrier Group Pty. Ltd. 8 Below Ground Installation ••• 13

Galvanised U-Bars Heavy duty one-piece steel U-Bars with a 5mm wall thickness and 90mm diameter inHeavy Duty Steel surface mount or below ground models. Available in three standard lengths, they come hot dip galvanised and can be supplied with or without powder coated surface finishes. Below ground model has welded concrete starter bars, while fixings are supplied with surface mount models. Note: Hot dip galvanised and Safety Yellow are standard, optional powder coat colours area available on request. Powder coated colours available on request. Charges will apply. 12 style PART No. A B C D E F G Kgs* FINISH 1 UB100SM 90 1000 700 – 5 225 6 31 HDG+PC 2 UB100BG 90 1000 700 500 5 – – 31 HDG+PC 1 ub100sm-g 90 1000 700 – 5 225 6 31 HDG 2 ub100bg-g 90 1000 700 500 5 – – 31 HDG 1 UB150SM 90 1500 700 – 5 225 6 36 HDG+PC 2 UB150BG 90 1500 700 500 5 – – 36 HDG+PC 1 ub150sm-g 90 1500 700 – 5 225 6 36 HDG 2 ub150bg-g 90 1500 700 500 5 – – 36 HDG 1 UB200SM 90 2000 700 – 5 225 6 41 HDG+PC 2 UB200BG 90 2000 700 500 5 – – 41 HDG+PC 1 ub200sm-g 90 2000 700 – 5 225 6 41 HDG 2 ub200bg-g 90 2000 700 500 5 – – 41 HDG Note: All dimensions in mm – (A) Post diameter, (B) Overall unit width, (C) Height above ground, (D) Depth below ground, (E) Wall thickness, (F) Base plate diameter, (G) Base plate thickness. Finish: Hot Dip Galvanised (HDG) only/and Powder Coated (PC). *Approximate weight.14 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Galvanised U-Bars Double rail steel U-Bars with a 3mm wall thickness and 48.3mm diameterDouble Rail Steel in surface mount or below ground models. Available in three standard lengths they come hot dip galvanised and can be supplied with or without powder coated surface finishes. Note: Hot dip galvanised and Safety Yellow are standard, optional powder coat colours area available on request.12 style PART No. A B C D E F G Kgs* FINISH 1 UBD100SM 48.3 1000 1040 – 3 150 x 75 10 16 HDG+PC 2 UBD100BG 48.3 1000 1040 300 3 – – 16 HDG+PC 1 ubd100sm-G 48.3 1000 1040 – 3 150 x 75 10 16 HDG 2 UBD100BG-g 48.3 1000 1040 300 3 – – 16 HDG 1 UBD150SM 48.3 1500 1040 – 3 150 x 75 10 19.5 HDG+PC 2 UBD150BG 48.3 1500 1040 300 3 – – 19.5 HDG+PC 1 ubd150sm-g 48.3 1500 1040 – 3 150 x 75 10 19.5 HDG 2 UBD150BG-g 48.3 1500 1040 300 3 – – 19.5 HDG 1 UBD200SM 48.3 2000 1040 – 3 150 x 75 10 23.5 HDG+PC 2 UBD200BG 48.3 2000 1040 300 3 – – 23.5 HDG+PC 1 ubd200sm-g 48.3 2000 1040 – 3 150 x 75 10 23.5 HDG 2 UBD200BG-g 48.3 2000 1040 300 3 – – 23.5 HDG Note: All dimensions in mm – (A) Post diameter, (B) Overall unit width, (C) Height above ground, (D) Depth below ground, (E) Wall thickness, (F) Base plate LxW, (G) Base plate thickness. Finish: Hot Dip Galvanised (HDG) only/and Powder Coated (PC). *Approximate weight.Copyright © 2018 Barrier Group Pty. Ltd. ••• 15

20mm side shift 8 degree tilt and returnShock Absorbing Bollards 360° rotationUsed with enormous success in logistics and warehousing,our Shock Absorbing Bollards can withstand repeated knocksas well as helping to prevent damage to sensitive floors, doorsand walls. Available in five models which all have the abilityto move in three directions simultaneously to absorb impactsand then return to their original position.Our shock absorbing bollards can move inthree directions simultaneously to absorbimpact and return to original position.style PART No. ABCD E Kgs* FINISH1 SAB90SS-SM 90 900 3.05 150 – 12 SS2 SAB90SS-IF 90 900 3.05 – 80 x 25 12 SS3 SAB140-SM 140 1200 5 350 – 33 HDG+PS4 SAB140-CD 140 1200 5 – 300 x 50 33 HDG+PS5 SAB220-CD 220 1300 6.4 – 300 x 100 120 HDG+PSNote: All dimensions in mm – (C) Bollard diameter, (B) Height above ground, (C) Wallthickness, (D) Base plate diameter, (E) Shaft size LxW. Finish: Hot Dip Galvanised(HDG) and Polyethylene Skinz (PS), or 316 Stainless Steel (SS) only. *Approximate weight.16 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Now standard with our new polyethylene 5 one-piece Skinz, read more on page 6. 3412Stainless Steel Surface Mount Surface Mount Core Drilled In-floor Mount ••• 17Copyright © 2018 Barrier Group Pty. Ltd.

CorePlusEngineered Streetscape BollardsWe have all witnessed the global increase in heinouscrimes involving rampaging vehicles. While impossibleto predict when or where these shocking events takeplace, we can take steps to protect life and property.ObjectiveThe CorePlus is a new bollard currently under developmentin our design centre. The aim of CorePlus is to develop anengineered energy absorbing structure that can take everyday knocks in its stride. Specifically, the goal is to stopa 2 tonne vehicle travelling at 60kph. Development of theCorePlus is well advanced.For up-to-date information visit our website.

Smart CartForecourt Access ManagementThere is a need for separation barriers in airport andservice station forecourts. But in fact, this is true foranywhere that vehicles and pedestrians interact witheach other. The Smart Cart will provide a level ofguidance and protection for pedestrians and operators.It is quick to deploy and easy to operate.ObjectiveThe Smart Cart aims to provide a mobile and highlyfunctional access management system with the widestrange of applications. Features include, twin independentlong span belts with a total span in excess of 80 metres.Both belt reels will pivot for maximum flexibility andincorporate spooling locks for belt tensioning. A lockabletool box and documentation pad add practicality whilethe built-in solar LED beacon maximizes night visibility.Visit our website for the latest on the Smart Cart.

Linebacker White powder coat asAsset Protection Barrier standard. Other coloursDeveloped in response to a growing number of accidental available on request.drive through accidents in retail areas, the Linebacker Charges will apply.Brace Reinforced Bollard (BR) has been designed to bemounted between curb-side furniture where room for Copyright © 2018 Barrier Group Pty. Ltd.freestanding bollards or installation depth are issues.The weakest point of a surface mounted bollard is whereit is bolted to the ground. Weakness is overcome by theuse of a brace.Linebacker BR bollards can be installedonto sloping or stepped ground levelsPART No. A B C D E F G Kgs FINISHLBR90-SM 90 1000 5 225 48.3 3.2 660 x 200 16.5 HDG+PCNote: All dimensions in mm – (A) Bollard diameter, (B) Bollard height, (C) Bollard wallthickness, (D) Bollard base plate diameter, (E) Brace diameter, (F) Brace wall thickness,(G) Brace base plate LxW. Finish: Hot Dip Galvanised (HDG) and Powder Coated (PC).20 •••

Compliancewheel stops 122Linebacker Hold-downDrive Through Protection bolt for tamperDeveloped in response to a growing number of accidental resistance.drive through accidents in retail areas, the Linebacker Solid ••• 21Core Bollard (SC) has been designed for use where maximumprotection is required but space is at a premium. The SC hasa solid hardened 50mm diameter core at its centre and a90mm x 5mm thick outer casing. The core drilled installationwith a single hold-down fixing leaves no tripping hazards andclear access for pedestrians. White powder coat as standard.Other colours available on request. Charges will apply.Wheel stops and bollards togetherprovide improved pedestrian safetyPART No. A B C D E F G Kgs FINISHLSC90-CD 90 1000 5 165 8 50 150 29.5 HDG+PCNote: All dimensions in mm – (A) Bollard diameter, (B) Bollard height, (C) Bollard wallthickness, (D) Bollard base diameter, (E) Bollard base thickness, (F) Steel core diameter,(G) Steel core below ground depth. Finish: Hot Dip Galvanised (HDG) and Powder Coated (PC).Copyright © 2018 Barrier Group Pty. Ltd.

Removable Bollards Available in either freestanding or roller door models, Cam-Lok removable bollardsIn-ground Cam-Lok are designed to protect businesses from costly ram raid robberies or damage. The bollard is locked deep into an in-ground sleeve, the internal locking mechanism being secured by a high quality cam lock with security registered keys. Note: Bollards, sleeves and accessories ordered separately. 23 4 1 Core Drilled sleeve New Concrete sleeve22 ••• Copyright © 2018 Barrier Group Pty. Ltd.

style PART No. A B C D Kgs FINISH NC SLEEVES E CD SLEEVES F2 BCL90* 90 950 200 5 12.3 HDG+PC bcl90s-nc 225 bcl90s-cd 4252 BCL90-G* 90 950 200 5 12.3 HDG bcl90s-nc 225 bcl90s-cd 4253 BCL90-SS* 90 883 200 3.05 9 SS bcl90ss-nc 225 bcl90ss-cd 4254 BCL90-SSH* 90 950 200 3.05 9 SS+H bcl90ss-nc 225 bcl90ss-cd 4251 BCL90RD* 90 950 200 5 12.5 HDG+PC bcl90s-nc 225 bcl90s-cd 4251 BCL90RD-G* 90 950 200 5 12.5 HDG bcl90s-nc 225 bcl90s-cd 4252 BCL140* 140 1050 200 5 21 HDG+PC bcl140s-nc 225 bcl140s-cd 4252 BCL140-G* 140 1050 200 5 21 HDG bcl140s-nc 225 bcl140s-cd 4253 BCL140-SS* 140 983 200 3.4 21 SS bcl140Ss-nc 225 bcl140Ss-cd 4254 BCL140-SSH* 140 1050 200 3.4 21 SS+H bcl140Ss-nc 225 bcl140Ss-cd 4255 bhh Wall mount bollard holder6 bcl90h Cam-Lok 90mm surface mount bollard holder6 bcl140h Cam-Lok 140mm surface mount bollard holder7 bclkey** Cam-Lok additional registered keyNote: All dimensions in mm – (A) Bollard diameter, (B) Height above ground, (C) Depth below ground, (D) Wall thickness,(E) New Concrete sleeve height, (F) Core Drilled sleeve height, Finish: Hot Dip Galvanised (HDG) only/and Powder Coated (PC),or 316 Stainless Steel (SS) only/and Aluminium cap with handle (H).*Each order of one or more bollards is supplied with TWO registered keys.**Additional keys are available to purchase separately. 5 6 7 Hanging holder Surface mount holder Additional keysCopyright © 2018 Barrier Group Pty. Ltd. ••• 23

Removable Bollards Available in either freestanding or roller door models, Sleeve-Lok removableIn-ground Sleeve-Lok bollards are designed to protect businesses from costly ram raid robberies or damage. They are widely used for controlling vehicle access into sensitive areas. The bollard is locked into an in-ground sleeve by padlocking the steel sleeve cap to the bollard. Note: Bollards, sleeves and accessories ordered separately. 12 3 4 Core Drilled sleeve New Concrete sleeve24 ••• Copyright © 2018 Barrier Group Pty. Ltd.

style PART No. A B C D Kgs FINISH NC SLEEVES E CD SLEEVES F2 BSL63 63 900 150 1.6 4.5 HDG+PC bSl63s-nc 150 bSl63s-cd 3002 BSL63-G 63 900 150 1.6 4.5 HDG bSl63s-nc 150 bSl63s-cd 3002 BSL90 90 950 200 5 12 HDG+PC bSl90s-NC 225 bSl90s-cd 4252 BSL90-G 90 950 200 5 12 HDG bSl90s-NC 225 bSl90s-cd 4253 BSL90-SS 90 883 200 3.05 9 SS bSl90ss-nc 225 BSL90SS-CD 4254 BSL90-SSH 90 950 200 3.05 9 SS+H bSl90ss-nc 225 BSL90SS-CD 4251 BSL90RD 90 950 200 5 12.2 HDG+PC bSl90s-NC 225 bSl90s-cd 4251 BSL90RD-G 90 950 200 5 12.2 HDG bSl90s-NC 225 bSl90s-cd 4252 BSL140 140 1050 200 5 21 HDG+PC bSl140s-nc 225 bSl140s-cd 4252 BSL140-G 140 1050 200 5 21 HDG bSl140s-nc 225 bSl140s-cd 4253 BSL140-SS 140 983 200 3.4 21 SS bSl140Ss-nc 225 bSl140Ss-cd 4254 BSL140-SSH 140 1050 200 3.4 21 SS+H bSl140Ss-nc 225 bSl140Ss-cd 4255 bhh Wall mount bollard holder6 bsl63h Sleeve-Lok 63mm surface mount bollard holder6 bsl90h Sleeve-Lok 90mm surface mount bollard holder6 bsl140h Sleeve-Lok 140mm surface mount bollard holder7 bpl2 High security 9mm shielded padllock with 2 keysNote: All dimensions in mm – (A) Bollard diameter, (B) Height above ground, (C) Depth below ground, (D) Wall thickness,(E) New Concrete sleeve height, (F) Core Drilled sleeve height. Finish: Hot Dip Galvanised (HDG) only/and Powder Coated(PC), or 316 Stainless Steel (SS) only/and Aluminium cap with handle (H). 5 6 7 Hanging holder Surface mount holder BPL2 high security shielded padlock ••• 25Copyright © 2018 Barrier Group Pty. Ltd.

Removable Bollards 1Surface Mount Tee-lok 2Surface mount removable bollards are designed forapplications where the floor cannot be core drilled Copyright © 2018 Barrier Group Pty. Ltd.or penetrated. For example, clean areas such as foodpreparation or pharmaceutical processing. Tee-lokuses our unique ‘T’ handle key to unlock and removethe bollard from the receiver shoe. Ideal for trafficmanagement. Note: Bollard and receiver shoe soldseparately.Receiver shoes 3 ‘T’ handle keystyle PART No. A B C D E Kgs FINISH1 SMTL* 90 950 5 200 20 12 HDG+PC1 SMTL-G* 90 950 5 200 20 12 HDG2 SMCLH Surface mount receiver shoe – ZP+PC (3kg)2 SMCLH-Z Surface mount receiver shoe – ZP (3kg)2 SMCLH-SS Surface mount receiver shoe – SS (3kg)3 BRKEY-P** Additional T-handle key for Tee-LokNote: All dimensions in mm – (A) Bollard diameter, (B) Bollard height, (C) Bollard wallthickness, (D) Base plate diameter, (E) Shoe height. Finish: Zinc Plated (ZP) only/andPowder Coated (PC).*Each order of one or more bollards is supplied with TWO registered keys.**Additional keys are available to purchase separately.26 •••

Removable Bollards 1 2Surface Mount Cam-Lok 4Surface mount removable bollards are designed forapplications where the floor cannot be core drilled ••• 27or penetrated. For example, clean areas such as foodpreparation or pharmaceutical processing. The surfacemount Cam-Lok is a heavy duty bollard that locksinto the surface mounted receiver shoe via an internallocking system, which utilises a high security cam lockwith registered keys. Note: Bollard and receiver shoe soldseparately.Receiver shoes 5 Registered keysstyle PART No. A B C D E Kgs FINISH1 SMCL* 90 950 5 200 20 12 HDG+PC1 SMCL-G* 90 950 5 200 20 12 HDG2 SMCL-SS* 90 950 3.05 200 20 12 SS3 SMCLH Surface mount receiver shoe – ZP+PC (3kg)3 SMCLH-Z Surface mount receiver shoe – ZP (3kg)4 SMCLH-SS Surface mount receiver shoe – SS (3kg)5 BCLKEY** Additional Cam-Lok registered keyNote: All dimensions in mm – (A) Bollard diameter, (B) Bollard height, (C) Bollard wallthickness, (D) Base plate diameter, (E) Shoe height. Finish: Zinc Plated (ZP) only/andPowder Coated (PC), or 316 Stainless Steel (SS).*Each order of one or more bollards is supplied with TWO registered keys.**Additional keys are available to purchase separately. 3Copyright © 2018 Barrier Group Pty. Ltd.

1 23Retractable Bollards 45Retractable bollards are designed for medium security Copyright © 2018 Barrier Group Pty. Ltd.applications such as traffic and parking control.They offer a simple, trouble-free operation proven overmany years of installation. The BR900 has a 5mm thickmild steel bollard that is galvanised before being powdercoated in Hi-vis Yellow with two Red reflective bands.The BR900-SS has a 316 marine grade stainless steelbollard with a 3.05mm thick wall, and as this model isdesigned for architectural applications it does not includereflective bands.style PART No. A B C D E F G FINISH1 BR900* 90 900 1150 5 140 41.5 12.5 HDG+PC2 BR900-SS* 90 900 1150 3.05 140 38 8.8 SS3 BRKEY-P** Additional T-handle key4 BR900R Replacement bollard for BR9005 BR900R-SS Replacement bollard for BR900-SSNote: All dimensions in mm – (A) Bollard diameter, (B) Height above ground, (C) Depthbelow ground, (D) Wall thickness, E) In-ground casing diameter, (F) Shipping weight (Kgs).(G) Operating weight (Kgs). Finish: Hot Dip Galvanised (HDG and Powder Coated (PC),or 316 Stainless Steel (SS).*Each order of one or more bollards is supplied with TWO T-handle keys.**Additional keys are available to purchase separately.28 •••

4Fold Down Bollards 1 23Fold Down Bollards have been designed for vehicle 5access control applications. In the flat position,the bollard is a low 80mm high to allow easy vehicle Padlock model Padlock model Keylock modelclearance. In the upright position, it stands 800mm Front view Galvanised Rear viewhigh with a broad face of 150mm wide that includes ••• 29one reflective sign for greater visibility. FD150 issupplied with a 40mm padlock and 2 keys, or for agreater level of security choose the key lockable FD150Kmodel which includes two keys. Supplied with fixingsfor surface mount installation or purchase the additionalBGK4 in-ground kit when setting into new concrete.For installation into asphalt it is recommended to usea concrete footing for added strength and stability.style PART No. A B C D E F G FINISH 1 FD150 150 800 80 200 x 200 10 12 5 HDG+PC 2 FD150-G 150 800 80 200 x 200 10 12 5 HDG 3 FD150K 150 800 80 200 x 200 10 12 5 HDG+PC 4 BGK4 In-ground mounting kit for FD150 5 FDS1 Reflective sign face with Red/Yellow diagonal stripesNote: All dimensions in mm – (A) Bollard width, (B) Upright height, (C) Fold downheight, (D) Base plate LxW, (E) Base plate thickness, (F) Shipping weight (Kgs),(G) Operating weight (Kgs). Finish: Hot Dip Galvanised (HDG) only/and Powder Coated (PC).Copyright © 2018 Barrier Group Pty. Ltd.

Choosing the right fence or rail system canbe a bit of a balancing act. But don’t worry,because whether your application calls forpermanent barriers, portable crowd controlbarricades, machinery guarding or eventemporary edge protection, we have them all.And if gates are also a requirement, Section 03has a selection of industrial gates designedto complement our fence and rail systems.All can be customised for your requirements.

FENCE AND RAIL SYSTEMS

Rails available in HDG only or with a Yellow powder coated finishW-BeamGuard Fence (Type D)W-Beam Guard Fence is a heavy duty modular barrier system designed for asset protection,and the protection of pedestrians from slow moving vehicles in and around industrial andcommercial complexes and car parks.With a choice of rail lengths, post options and accessories W-Beam Guard Fence can beeasily configured for most applications. Rails are available in two standard finishes– Hot Dip Galvanised only (HDG) or Galvanised with a Yellow Powder Coat (G+PC).PART No. GALVANISED RAILS PART No. GALVANISED & yellow POWDER COATED RAILSWBR500-2G W-Beam rail for 0.5 metre centres, requires 2 posts (8.6kgs) – HDG WBR500-2Y W-Beam rail for 0.5 metre centres, requires 2 posts (8.6kgs) – G+PCWBR1000-2G W-Beam rail for 1 metre centres, requires 2 posts (13.8kgs) – HDG WBR1000-2Y W-Beam rail for 1 metre centres, requires 2 posts (13.8kgs) – G+PCWBR1500-2G W-Beam rail for 1.5 metre centres, requires 2 posts (19kgs) – HDG WBR1500-2Y W-Beam rail for 1.5 metre centres, requires 2 posts (19kgs) – G+PCWBR2000-2G W-Beam rail for 2 metre centres, requires 2 posts (24.2kgs) – HDG WBR2000-2Y W-Beam rail for 2 metre centres, requires 2 posts (24.2kgs) – G+PCWBR2500-2G W-Beam rail for 2.5 metre centres, requires 2 posts (30kgs) – HDG WBR2500-2Y W-Beam rail for 2.5 metre centres, requires 2 posts (30kgs) – G+PCWBR3000-3G W-Beam rail for 3 metre centres, requires 3 posts (34.7kgs) – HDG WBR3000-3Y W-Beam rail for 3 metre centres, requires 3 posts (34.7kgs) – G+PCWBR3500-3G W-Beam rail for 3.5 metre centres, requires 3 posts (40kgs) – HDG WBR3500-3Y W-Beam rail for 3.5 metre centres, requires 3 posts (40kgs) – G+PCWBR4000-3G W-Beam rail for 4 metre centres, requires 3 posts (45.1kgs) – HDG WBR4000-3Y W-Beam rail for 4 metre centres, requires 3 posts (45.1kgs) – G+PCKIT10 W-Beam splice fixing kit (8 off M16 x 32 bolts with nuts) KIT10-Y W-Beam splice fixing kit (8 off M16 x 32 bolts with nuts)32 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Part No. DESCRIPTION           (Part Number is for rail only)WBR45EX550-G W-Beam rail 45 degree external curve radius 550cm (26kgs) – HDGWBR90EX275-G W-Beam rail 90 degree external curve radius 275cm (26kgs) – HDG 750mm RadiusPart No. DESCRIPTION           (Part Number is for rail only) Part No. DESCRIPTION           (Part Number is for rail only)WBR45IN550-G W-Beam rail 45 degree internal curve radius 550cm (26kgs) – HDG WBR90EX75-G W-Beam rail 90 degree external curve radius 75cm (32kgs) – HDGWBR90IN275-G W-Beam rail 90 degree internal curve radius 275cm (26kgs) – HDG WBR90EX75-Y W-Beam rail 90 degree external curve radius 75cm (32kgs) – HDG+PCCopyright © 2018 Barrier Group Pty. Ltd. ••• 33 

Part No. DESCRIPTION                Rail fixings includedWBP400-SM W-Beam single rail surface mount post with cap 400mm (13.2kgs) – HDG Part No. DESCRIPTION              Rail fixings includedWBP725-SM W-Beam single rail surface mount post with cap 725mm (18kgs) – HDG WBP1140-D-SM W-Beam double rail surface mount post with cap 1140mm (24kgs) – HDGWBP1225-BG W-Beam single rail below ground post with cap 1225mm (17kgs) – HDG WBP1760-D-BG W-Beam double rail below ground post with cap 1760mm (26.4kgs) – HDG Part No. DESCRIPTION            Ball-Fence fixings included Part No. DESCRIPTION BFTP-WB W-Beam/Ball-Fence through post (2.4kgs) – HDG CAPWBP-P W-Beam post cap – Yellow LLDPE BFEP-WB W-Beam/Ball-Fence end post (2.3kgs) – HDG wbrb W-Beam rail end boot – Yellow LLDPE BFHR W-Beam/Ball-Fence hand rail 32 N.B. x 6 metres (3.2kgs) – HDG34 ••• Copyright © 2018 Barrier Group Pty. Ltd.

Part No. DESCRIPTION               End terminal fixings included Part No. DESCRIPTION             End terminal fixings includedWBSN-g W-Beam stubby nose end terminal (12kgs) – HDG WBFT-gWBSN-Y W-Beam stubby nose end terminal (12kgs) – HDG+PC WBFT-Y W-Beam fish tail end terminal (8.5kgs) – HDG W-Beam fish tail end terminal (8.5kgs) – HDG+PC Part No. DESCRIPTION                    Connector fixings included Part No. DESCRIPTION              Connector fixings included WB90EC-g W-Beam 90 degree external connector (13.2kgs) – HDG WB90IC-g W-Beam 90 degree internal connector (13.2kgs) – HDG WB90EC-Y W-Beam 90 degree external connector (13.2kgs) – HDG+PC WB90IC-Y W-Beam 90 degree internal connector (13.2kgs) – HDG+PCCopyright © 2018 Barrier Group Pty. Ltd. ••• 35 

Ball-Fence Ball-Fence Gates, page 64.Hand Rail SystemGalvanised steel safety barriers are designed to separatepedestrians from forklifts to prevent injury or fatality.Ball-Fence is a modular handrail system that includesstanchions, a top handrail and a centre knee-rail.Design flexibility is a strength of the Ball-Fence, usinggalvanised post and rail components that can beconfigured to suit any requirement or length. Industrialswing gates, guardrails and asset protection options arealso available to enhance the safety features of the range.Usually the Ball-Fence components are assembled onsite, but can be partially assembled in our factory anddelivered in sections for simple installation.Stanchions are supplied with fixings.36 ••• W-Beam with Ball-Fence, page 34. Copyright © 2018 Barrier Group Pty. Ltd.