Solid Deals International Catalogue

MaXXmill 500MAXXMILL 500 is the ideal vertical milling center for the 5-axis operation of parts in low or medium quantities. It is theperfect machine for jobshops, industrial businesses (e.g. automobile vendors), general mechanical engineering companiesand further education facilities. The MAXXMILL 500 can mill parts with an edge size of 500 x 500 x 475 mm on 5 sides in justone operation.[Machine base] [Spindle]- The machine base is made of - Mechanical spindle direct drive: 10000 rpm polymer concrete, the X-axis slide - Motor spindle: 15000 rpm is made of welded steel.[Tool changer]- T ool changer with 30 (40) tool stations[Chip removal] [Table] [Operating panel] - The chip removal can be handled by an - Swivelling-rotary table - Available with Heidenhain or Siemens optional available hinge type chip conveyer. control technology A chip flushing system is standard in the base machine. - Swivelling operating panel[Workpieces] Housing Distributor Pump housing(Cast steel) (Brass) (Aluminium)

E[M]CONOMY[ ]means:High precision for heavy weights.MMV 2000Floor-Type Machining Center

MMV 2000Floor-Type Machining Center for workpieces up to 2200 kg [ Spindle] [ Axes] - Motor spindle with 15000 rpm - Linear guides in X, Y and Z directions - High dynamic - Linear scales in X directions - Water-cooled[ Tool magazine ] - Tool changer with 30 tools [ Rear machine compartment ] Machine with optional equipment - Machine compartment partitioned by maintenance-free steel accordion way-coversFloor-Type Machining Center for 3, 4 or 5 axis machining for small to medium lot sizes. Rapid travel up to 50 m/min with the utmostin precision. The super-structure is highly rigid, even for heavy work pieces weighing up to 2,200 kg.

That’s [ ]E[M]CONOMy:Design to Cost.EMCOTURN E-SerieCNC turning center for bar stock work up to Ø 95 mmand chucking work up to Ø 360 mm.

EMCOTURN E65The EMCOTURN E65 gives you the finest European technology at the best possible price. You don’t have to go withoutanything: the EMCOTURN E65 has driven tools with a mighty 5 kW of drive performance, C-axis, bar loader package, yourchoice of Siemens or Fanuc control unit, and much, much more. All equipment is of the highest quality, guaranteeing accurateparts and a long machine life. [Tool turret] [Control unit] - 12 stations VDI 30 axial - C utting-edge digital - 12 stations driven on request control technology - Polygonal turning - Synchronized tapping - LCD color monitor - S inuermik 828D or Fanuc[Work area] 0i TD includes ShopTurn or- Straight chip fall ManualGuide i- Top ergonomics- Guideways fully covered[Main spindle]- High drive performance- Thermostable design- Large speed range- A2-6 spindle connection- Bar capacity Ø 65 mm[Bar loader package] Machine fitted with optional equipment [Machine base]- Short bar loader - Easy to transport- Parts catcher - Large coolant reservoir- Interface - Easy to clean- Warning light- Adaptor sleeves Screw fitting for Fan wheel End piece Tool holder Hydraulic piston hydraulic unit (Brass) (Carbon steel) (Tool steel) (Case-hardened steel)(Tempering steel)

EMCOTURN E65 - Big BoreThe EMCOTURN E65 - Big Bore is specially designed for manufacturing steel, aluminum, and plastic workpieces with adiameter of up to 95 mm. This bar capacity provides high levels of machining flexibility combined with extreme accuracy.The EMCO LM 1200 short bar loader permits the fully automated feeding and processing of bar stock measuring upto 1200 mm in length. [Tool turret] [ Work area] - 12 stations VDI 30 axial - Straight chip fall - If required, all 12 stations - Top ergonomics - C ompletely covered can be driven - Polygonal turning guide rails - Synchronized tapping[Main spindle]- Extra large bar capacity of Ø 95 mm- Thermo-symmetrical design- A2-8 spindle nose- Speed range 0 – 3200 rpm- Increased torque 267 Nm- Spindle length 1200 mm[Control unit]- Cutting-edge digital control technology- LCD color monitor- S iemens or Fanuc includes ShopTurn or ManualGuide i[Bar loader] Machine fitted with optional equipment [Machine stand ]- Fully automated loading of bar stock of up to 1200 mm - Easy to transport- Adapted to the machine’s spindle length - Large coolant reservoir- Dry - no need to top up the oil - Easy to clean- Simple to operate and program- Longitudinal displacement approx. 500 mm Winch Drive hub Adjustment sleeve (Brass) (Gray cast iron) (Aluminium)

E[M]CONOMY[ ]means:Think big!EMCOTURN 900 CNC turning center for workpieces with diameters of up to 1050 mm and maximum lengths of 5000 mm

EMCOTURN 900[Main spindle] [ Tool turret]- A2-15 spindle nose to DIN 55026 - Tool holder disk- Chuck diameter 500/630/800 mm with 12 positions- Spindle bore 206 mm- Max. speed 800 rpm - Tool selection with- Max. drive power 80 kW directional logic[ C-axis main spindle] - Driven tool power of 17.5 kW- Separate axis motor with reduction gearbox- Maximum torque transmission- No backlash- High positioning accuracy[ Digital drives] Machine with optional equipment- Digital position monitoring- Optimal axis control behavior- Optimal spindle control behavior, even at low speedsBig parts need big machines. A simple equation, with an equally simple solution: the EMCOTURN 900 from EMCO. This machinecan manufacture parts of up to 1050 mm in diameter and 5000 mm in length. Fast, efficient, and high-precision, the machine’s soliddesign, extremely stable components and tools, and its extensive range of accessories give it the flexibility to adapt to anymachining task.

[ Tailstock ] [Applications]- Automatic tailstock positioning Chucking shafts between the centers: the use- Quill with 150 mm diameter of a face-driver allows the workpiece to be- Quill stroke 150 mm machined along its entire length. This ensures- No. 5 Morse taper mounting with a high degree of precision and optimal concentricity, even with large cutting integrated bearing forces. Main shaft for a wind mill gear box On an EMCOTURN 900 machined heavy duty drill bit used for tunnel and canal construction works.

E[M]CONOMy[ ]means:Mastering big challenges with a small machine.EMCOMAT 14D – 17D – 20D Universal lathe with toolmaker precision for industrial use

EMCOMAT 14D [ Tailstock][ Digital display ] - M ade from high-quality, vibration-damping - 3-axis digital display gray cast iron with color screen - Sits on its own guide prism[ Chuck protection ] - T he tail stock can be set - With limit switch off-center for cutting tapers - Main spindle with 40 mm spindle bore[ Headstock] - Electronic speed control - Constant cutting speed - 7.5 kW drive power[ Machine bed] [ Electronics] - Diagonally ribbed - Electronic equipment - Induction-hardened complies with the latest technical standards (CE) and grinded - 3-point support Machine with optional equipment[ Cover ] - Lead and draw screw partially covered[Machine stand ] - Welded steel plate construction - Easy to transport - Integrated chip tray - 3-point support eliminates vibrationsThe EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the most demanding requi-rements: infinitely-variable speed control, constant cutting speed and an impressive 7.5 kW of drive power (40% duty cycle). Thissmall yet powerful machine is mainly used where highly accurate work needs to be carried out in a small space, such as in optical,electrical and automobile workshops, laboratories and even Formula 1.

EMCOMAT 17D and 20D[ Single lever operation ] [ Chuck protection ] [ Digital display ] - S ingle lever operation for axial - With limit switch - 3 -axis digital display feed and longitudinal feed - M ain spindle with 50 mm - W ith color screen[ Drive] spindle bore - P owerful drive with infinitely variable speed control[Cover] [ Machine bed] [ Machine stand ] - Lead and draw screw with - Diagonally ribbed - Welded steel plate construction cover - Induction-hardened and grinded - Easy to transport - 3-point support - Integrated chip tray - 3 -point support eliminates vibrations Machine with optional equipmentEMCOMAT 17D / 20D systems are popular because they are easy to operate, ergonomic and come equipped with a high-tech3-axis digital display, 999 tool positions, 999 contour points, constant cutting speed, and infinitely variable control.

E[M]CONOMy[ ]means:Expanding the playing field.HYPERTURN 65 Powermill High-performance turning/milling center for complete machining of complex workpieces in one operation

HYPERTURN 65 Powermill [Upper tool system] [Upper Y axis] - Powerful milling spindle / 29 kW - Large working stroke +120 / -100 - Wide speed range 0-12000 rpm - Short cantilever length - Water-cooled motor spindle with HSK-T63 - Pre-loaded roller guides - Internal and external coolant supply - Wide guide clearance - B axis with zero backlash direct drive - B axis position can be fixed in any position[ Main spindle]- Integrated spindle motor (ISM) in synchronous technology - water-cooled- High drive power / 29 kW- High torque / 250 Nm- Large speed range / 0 - 5000 rpm- Highly dynamic- Bar capacity diameter 65 (76.2) mm[ Tool magazine]- 40- / 80-slot chain-type tool magazine- Ergonomically arranged up front- Easy to be manually loaded with tooling- Max tool length 250 mm- Max tool diameter 80 (120) mm- Max tool weight 5 kg[ Lower tool system] [ Lower Y axis]- 12-station tool turret - Travel +/- 50 mm- VDI30- (VDI40- or BMT55P-) quick-change - Stable, compact construction - Wide guide clearances system - Tapered carriage system- 12 driven tool stations- Servo-controlled Machine with optional equipment- Rigid tapping- Polygonal turning, etc.More clearance, more power, more possibilities: with a spindle distance of 1300  mm, a powerful counter spindle which alsoallows 4‑axis machining, a B‑axis with a direct drive for complex 5-axis simultaneous milling operations, an additional Y‑axis forthe lower turret, and all proven, high-quality features of the Hyperturn series, the Hyperturn 65 Powermill is a powerful additionto every machine range.

[ Counter spindle] [Workpieces]- Integrated spindle motor (ISM) in Sprocket-wheel synchronous technology - water-cooled (Steel Ck 45)- High dirve power / 29 kW Bonnet flange- High torque / 250 Nm (Brass)- Wide speed range / 0-5000 rpm- Coolant feed internal for flushing- Automatic part ejector [Chip conveyer] - Hinged type conveyor belt - Throw-off height 1200 mm - Integrated coolant tank 400 l - Turret pumps: 2 x 14 bar - Flushing pumps: 2 x 3,7 bar [ Control unit] - Ergonomically placed - 90° pivot and slidable - Siemens Sinumerik 840D sl - LCD color monitor 15‘‘[ Work area ] [Finished part conveyor] Sensor housing (Stainless steel)- Generous design - Max. work piece size Ø 77 x 200 mm Knee- Straight chip fall - Max. finished part weight 4,5 kg (Steel 16 Mn Cr5)- Optimum access to the work area - Storage area 230 x 1000 mm

B Sheet Metal Work Hydraulic CNC Press Brakes AHK D CNCExcellent price/performance ratio - unsurpassed combinationof power, benefits, and reliabilitySpecifications AHK D CNC 37220 40175 40220 40320 40400 60220 60320 60400Working areaForce t 220 175 220 320 400 220 320 400Brake length mm 3700 4050 4050 4050 4050 6050 6050 6050Distance between columns mm 3100 3600 3600 3600 3400 5100 5100 5100Throat mm 410 410 410 410 510 410 410 510Clear opening, max. mm 265 265 265 365 365 265 365 365Bending speed mm/sec 10 10 10 10 8 10 10 8Rapid feed mm/sec 120 120 120 100 100 100 100 100Return speed mm/sec 100 100 100 100 80 100 100 80Motor rating kW 22 18.5 22 37 37 22 37 37Dimensions / WeightHydraulic tank volume Liter 250 250 250 250 450 250 250 500Dimensions Length mm 4950 5250 5250 5300 5750 7500 7500 7500 1770 1700 1770 1910 2110 1770 1910 2110 Width kg 2900 2750 2900 3230 3540 3250 3450 3710 Height 14100 12850 14750 20750 26750 20590 28250 35750Weight 182 409 182 410 182 411 182 412 182 413 182 414 182 415 182 416Part No. with 3-axis controlPart No. with 4-axis control 182 509 182 510 182 511 182 512 182 513 182 514 182 515 182 516 For more information, visit www.knuth.de 237

F Belt Sanders B 150Versatile and powerful!• large sanding surface, powerful and robust - ideal for commercial and industrial applications• the 4 kW motor provides plenty of power even at highest loads• excellent grinding results due to vibration-free operation and high rigidity• adjustable, rigid work support at the idler roll• high belt speed up to 30 m/sec• quick belt changes via a proven, well-designed construction with quick- change vise• convenient angle adjustment at the base frameSpecifications B 150Belt Sanderbelt dimensions mm 150 x 2000 30belt speed m/sec Standard Equipment: machine base, safety observation shield, support table, 4 operator manualDrive capacity 1000 x 550 x 1000motor rating kW 120 102 850Dimensions / Weight sanding belt K 100 112 863 H K 120 112 864overall dimensions (LxWxH) mm Grit Part No. K 180 112 865 K 240 112 866weight kg K 40 112 860 K 400 112 867Part No. K 60 112 861 K 80 112 862 H Dual pedestal grinders DSB DRigid Dual Pedestal Grinders forindustrial and commercialoperations• heavy-duty design with rigid cast-iron body and maintenance-free motor• balanced rotor and premium bearings ensure quiet operation and optimum results• safety always comes first: emergency stop switch and safety observation shield• premium components for long tool life and endurance under rough workshop conditions Standard Equipment: machine base, safety observation shield, 2 universal corundum wheelsSpecifications DSB 200 D DSB 250 D DSB 300 D Part No. 112 151 112 152 112 150 roughing disk 112 147 112 155 112 145grinding wheel Ø 200 x 32 Ø 250 x 32 Ø 300 x 50 finishing disk 112 148 112 156 112 146speedmotor 400 V mm x Ø 30 x Ø 30 x Ø 75weight rpm 2950 2950 2950 kW 0.9 0.9 2.2 kg 28 32 84226 For the latest specials, visit www.knuth.de

Everything is just right - good ergonomics and Bintuitive operation ensure increased productivityA convincing control concept - Fagor 8055i A-TCProgramming at workshop level – from a simple turned part to complex contours – via an intuitive user interface, plusintegrated cycles for facing and plain turning, radius, taper, threads, plunge-cuts, and complete contouring processes.For detailed information on the Fagor control, visit our website and search for Proton 500 (product search).Examples of ApplicationsStandard Equipment: Fagor 8055i A-TC or Siemens 808 D control, 6-station tool turret, tailstock, 2 electronic hand-wheels, 3-step main gear,steady center MT5, steady rest 20-130 mm, follow rest 20-80 mm, automatic central lubrication, coolant system, work lamp, operating tools,operator manual and programming instructionsOptions Part No. • hydraulic tailstock (Proton 500/1500 B) 250 721• 3-jaw lathe chuck, steel, 250 mm 146 373 • hydraulic tailstock (Proton 500/2000 B) 250 722• hydraulic tailstock (Proton 500/1000 B) 250 719 • hydraulic pump 250 720 Specifications Proton 500/1000 B 500/1500 B 500/2000 B Working area center width mm 1000 1500 2000 bed width mm 390 390 390 max. turning diameter - over bed mm 500 500 500 - over support mm 290 290 290 X axis travel mm 240 240 240 Z axis travel mm 780 1280 1780 Feed X axis rapid feed mm/min 6000 6000 6000 Z axis rapid feed mm/min 8000 8000 8000 Headstock spindle bore mm 82 82 82 spindle mount D8 speed range D8 D8 (3) 35-2500 chuck diameter 250 Tool turret rpm (3) 35-2500 (3) 35-2500 tool stations 6 tool shank dimensions mm 250 250 25 x 25 tool diameter 32 6698 mm 25 x 25 25 x 25 mm 32 32 For the latest specials, visit www.knuth.de

D Sheet Metal Work Hydraulic Workshop Presses KNWP HMHydraulic Shop Presswith double-acting cylinder• 60 to 200 tons force• ideal for repair and assembly work• trueing of axles, supports, shafts, and much more• removal and pressfitting of bearings and bushingsall HM models with motorizedhydraulic drive• automatic ram return• 2-step hydraulic unit• supply voltage 3x400V / 50 Hz• press frame features high rigidity, functionality and excellent finish KNWP 100 HM is shownSpecifications KNWP 60 HM 100 HM 160 HM 200 HM dimensionsWorking area Aforce tons 60 100 160 200 B mm 2120 2140 2200 2270max. pressure bar 259 C mm 1000 1350 1410 1610max. stroke mm 380 258 255 243 D mm 695 755 825 865forward speed mm/s 8.69 E mm 750 1100 1100 1300press speed mm/s 2.07 380 400 400 F mm 260 300 380 410return speed mm/s 10.79 G mm 1315 1665 1725 1925Drive Capacities 7.54 7.48 5.73 H mm 150 150 150 150motor rating kW 1.5 I mm 197 180 180 180hydraulic pump 2.47 2.4 1.84 J mm 750 750 750 750Dimensions / Weight Liter 30 K mm 805 865 935 975hydraulic tank volume kg 540 9.06 9.35 7.08 Part No. mm 200 250 325 368weight 2.2 3 3 131 744 131 745 131 746 131 747 30 30 30 970 1195 1690 For more information and options, visit www.knuth.de 233

D Hydraulic Workshop Presses KNWP MFor workshops, schools and vocationaltraining centersFor any repair and assembly tasks, e.g.:• removal and pressfitting bearings, bolts and bushings• trueing of supports, shafts, axles and profiles• pressing and crimping• load testing and welding sample tests• straightening of workpieces• material testing• rigid machine frame freaturing a carefully machined weldment structure• hydraulic pump can be operated by hand or foot control (KNWP 30 / 50 M only)• 2-step hydraulics - with change-over switch for changing between quick-stroke and work stroke• Automatic reset of piston, controllable by user via a throttle valve and spring• the support table features a rigid design, but is easy to handle with adjustable height• standard multi-function die featuring a large belt width - for straightening flat materials and shafts - for machining workpieces in axial direction• Table lifting system (KNWP 50 M) A K KNWP 30 M shown IH EV-shaped support set J G D B FCfoot control (KNWP 30 / 50 M only) Specifications KNWP tons 15 M 30 M 50 M dimensions mm 1930 2050 2120 Working area bar A mm 690 695 925 force 15 30 50 B mm 600 640 760 max. pressure mm 382.2 374.6 399.5 C mm 555 560 750 piston travel per stroke mm D mm 190 230 300 - quick stroke mm 7.84 3.84 2.46 E mm 825 830 1100 - work stroke 0.96 0.47 0.30 F mm 100 115 115 total piston stroke l/min 160 160 160 G mm 115 155 155 flow rate l/min H mm 900 920 920 - quick stroke 31.5 31.5 31.5 I mm 215 255 325 - work stroke Liter 3.80 3.80 3.80 J mm 82 115 14 Dimensions / Weight Liter K 131 742 131 741 131 743 hydraulic tank volume kg 1.65 1.65 1.65 Part No. oil tank capacity 1.65 1.65 2.50 weight 117 150 250232 For the latest specials, visit www.knuth.de

F 3-Roll Bending Machine Modern design, user-friendly machine with asymetrical KRM mounted rolls KRM 10/4.0 shown including optional equipment (motorized rear roll adjustment)For conical bending, reduce all bend values by 50 %. The use of hardened bending rolls is recommended! • hardened rollers, suitable • standard series wire core groove even for stainless steel machining • top roll swings out across • hand-wheel for rear roll feed cam lock • motor driven left/right direction, operated • supplied with conical bending feature with foot switch • quick adjusting rolls (motor-driven, option) Specifications KRM 10/4,0 KRM 10/5,0 KRM 12/3,5 KRM 12/4,0 KRM 12/5,0 KRM 15/3,0 KRM 15/4,0 KRM 20/3,0 KRM 20/4,0 roll length prebend mm 1050 1050 1250 1250 1250 1550 1550 2050 2050 sheet thickness roll diameter mm 4,0 5,0 3,5 4,0 5,0 3,0 4,0 3,0 4,0 min. bending Ø motor rating mm 5,0 5,5 4 4,5 5,5 3,5 4,5 4,0 4,5 length width mm 110 130 110 120 140 110 130 130 140 height weight mm 150 190 150 175 210 150 190 190 210 Part no. kW 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 2,2 mm 1820 1820 2320 2020 2020 2620 2320 3300 3240 mm 850 900 850 850 900 850 900 900 900 mm 1150 1200 1150 1150 1200 1150 1200 1200 1200 kg 1080 1220 1150 1250 1365 1220 1360 1480 1530 131 960 131 961 131 962 131 963 131 964 131 965 131 966 131 967 131 968 3-Roll Bending Machine KRM-S Asymetrical 3-Roll Bending Machine with one-side Prebend • hardened rollers, suitable even KRM-S 15/7 shown for stainless steel machining including optional equipment (motorized bottom roller adjustment, • taper bending fixture extended rollers and profile rollers) • motorized rear roller adjustment • machine constructed of steel • high quality steel rollers • rollers are centrally powered by planetary gears and brake motor • top roller swings out • self-braking main motor • seperate control panel • meets CE requirements Specifications KRM-S 15/7 KRM-S 20/5 KRM-S 20/6 KRM-S 25/4 KRM-S 25/5 KRM-S 30/3 KRM-S 30/4 roll length mm 1600 2100 2100 2600 2600 3100 3100 prebend mm 7 5 6 4 5 3 4 Optional Equipment: motor-driven bottom sheet thickness mm 8 6 7 5 6 4 5 roller adjustment, extended roller ends roll diam. mm 170 170 190 170 190 170 190 for profile roller mounting, profile roller min. bending Ø mm 255 255 285 255 285 255 285 set, digital display motor rating kW 4 4 4 4 4 4 4 dimensions mm 3150x820 3650x820 3900x920 4150x820 4400x920 4650x820 4650x920 (LxHxW) x1130 x1130 x1200 x1130 x1200 x1130 x1200 weight kg 1900 2300 3600 2750 4200 3200 4600 Part no. 130 760 130 761 130 762 130 763 130 764 130 765 130 766 242 For the latest specials, visit www.knuth.de

Angle Iron Bender H KW 100for exact cold and hot bending of flat,round, and square steel• sturdy design for screw-mounting on workbench• infinitely variable bending stop adjustment• with eccenter quick-clamp for streamlined operation• bending angle read-out up to 120°• bending angle stop for high repeatability• ideal for repair shops and metal working shops Standard Equipment: angle stop, bending plates, bending lever, mate- rial stopSpecifications Model KW 100 Cold Hot 100 x 5 100 x 15weight kg 38 Flat steel mm 60 x 8 100 x 12 380 x 250 x 260 or mm 18 30dimensions (LxWxH) mm 129 122 Round steel mm 16 x 16 30 x 30 Square steel mm 100 x 12 -Part No. Flat copperUniversal Benderfor angle, round, loop, and coilbending• to produce grids, doors, gates, balcony railings, patio furniture as well as rod iron lamps.• with hardened bending segments• suitable for steel, brass, copper, and aluminum• round bar up to 15 mm• square bar up to 13 mm, flat bar up to 30 x 8 mmPart No. 130 127Hydraulic Presses Arbor PressHP 15 5T• 15 t • for press-fitting and pulling• piston bore 80 mm bearings• pressure 300 kg/cm2• ram to table distance 500 mm • aligning, bending and• table 300 x 300 mm broaching• height 1060 mm• weight 145 kg • basePart no. 130 042 Part no. 123 952 1 T - force 5 kN, workpiece size max. 147 mm Part no. 109 536 2 T - force 10 kN, workpiece size max. 215 mm Part no. 109 537 3 T - force 15 kN, workpiece size max. 317 mm Part no. 109 538 - 5 T - force 20 kN, workpiece size max. 400 mm Part no. 109 540254 For the latest specials, visit www.knuth.de

Drill Press / Milling Machine F Milling incl. Position Indicator Mark Super SVIncreased comfort for this compact, versatile powerhouseMore power and variable speed control fora wider range of applications• Two gear steps and premium frequency control technology ensure high torque across the entire speed range for powerful machining• The selected spindle speed is displayed directly on the control panel• Infinitely variable table feed• For more information, see Mark Super S (description)Infinitely variable speed across two rangesVariable Frequency Drive Standard Equipment: 3-axis position indicator, base, TV 1000 table feed, drill chuck (13 mm diam.), tool holder, operator manualOptions Part No. F• ER 32 F 106 058 H collet chuch 106 052• ER 32 collet set 104 918 H• NZM 125 machine vise 105 295 H• Assorted chucks 104 594• Accessories set MT 4For additional options for this machine, visitour website and search for Mark Super SV(product search)Specifications Mark Super SV Quill stroke mm 120Working area mm 75X axis travel Quill diameter mm 450Y axis travel mm 258Table dimensions mm 560 Spindle nose-to-table dist.Drilling capacity in steel ± 45°Guideway width mm 190 ThroatEnd milling kW 1.5Head stroke, vertical mm 800 x 240 Head swivel range V 400SpeedsT-slots (number/width/spacing) mm 40 Drive Capacities mm 1240 x 930 x 2100Vertical Cutter Head kg 480Spindle mount mm 120 Main motor rating 301 490 mm 32 Voltage 169 mm 380 Dimensions/Weight rpm (2) 75 - 438 / 438 - 2500 Dimensions mm 3 units x 14 x 80 Weight Part No. MT 4 For the latest specials, visit www.knuth.de

F Metal band saws VB Vertical Metal Band Saws with Proven Solid Construction, including Band Saw Blade Welder VB 610 shown • torsionally rigid steel construction • table tilts ±15° in all directions • New! Electrical speed control from 20 - 85 m/min and 120 - 500 m/min, with band speed indicator (VB 410 and higher) • increased cutting precision • functional and practical design • high-precision blade guides with carbide- tipped back-roller • blow-out feature results in improved cut control • with replaceable plastic bandage • hand wheel for quick blade tension adjustments • blade welder with stress relief, saw-shears, grinding stone, chip boxStandard Equipment: complete saw blade welder, lighting, 1 saw blade optimum blade tension via hand-wheelBandsaw Blades for model Dimensions Teeth/InchVB 300 2490 x 10 x 0,65 mm 10 / 14 / 22VB 360 2900 x 10 x 0,65 mm 10 / 14 / 22VB 410 3365 x 10 x 0,65 mm 10 / 14 / 22VB 510 3840 x 10 x 0,65 mm 10 / 14 / 22VB 610 3950 x 10 x 0,65 mm 10 / 14for more information on band saw blades, please visit our website and look for VB (product search)Specifications VB 300 VB 360 VB 410 VB 510 VB 610cutting capacityheight x throat mm 175 x 310 230 x 355 300 x 410 310 x 520 300 x 600speeds m/min 20 - 90 20 - 90 20 - 85 + 120 - 500 20 - 85 + 120 - 500 20 - 85 + 120 - 500blade width mm 3 - 16 3 - 16 3 - 16 3 - 16 3 - 16table mm 500 x 400 500 x 400 600 x 500 600 x 500 600x500/280x500table adjustment 15° 15° 15° 15° 15°motor rating / voltage kW/V 0,4 / 400 0,75 / 400 1,5 / 400 1,5 / 400 1,5 / 400table height mm 890 960 1000 1000 1015overall dim. (LxWxH) mm 355 x 630 x 1560 360 x 690 x 1735 440 x 815 x 1900 700 x 1100 x 2000 700 x 1295 x 2000weight kg 225 250 440 500 700Part No. 102 500 102 550 102 690 102 692 102 694190 Please indicate the size and type of teeth when ordering saw blades!

CNC Lathes B CNC Machining Proton 500 B • NEW with Siemens 808 D control • extensive selection of options availableEntry-level model of the proven Proton Series -with center width from 1000 to 2000 mm Proton 500/1500 B is shown with Fagor control and optional equipment• wide V-block guides, hardened and ground – superior rigidity especially rigid and load-resistant of the lathe flat bed across all models of this series • an automatic 6-station tool turret increases productivity even in• headstock and main spindle feature absolute rigidity under small batch productions high loads, constant temperature balance and superior • manual operation via 2 electronic hand-wheels, for accuracy conventional machining and easy set-up and measuring of• automatically shutting off 3-step main gear with infinitely tools and workpieces variable speed control • automatic central lubrication for simplified maintenance• the solid tailstock has a large quill with MT5 taper and isSpecifications Proton mm 500/1000 B 500/1500 B 500/2000 B optionally withAccuracy mmpositioning accuracy X axis mm 0.03 0.03 0.03 Siemens 808 Dpositioning accuracy Z axis mm 0.045 0.045 0.05repeatability X axis 0.012 0.012 0.012 control:repeatability Z axis mm 0.02 0.02 0.025Tailstock • self-explanatory, yet powerful CNCtailstock quill stroke / diameter kW 150 / 75 150 / 75 150 / 75 functions ensure highest precision attailstock taper kW MT5 MT5 MT5 the workpiece and short machiningDrive Capacities timesmain motor rating mm 11 11 11motor rating X / Z axis 1.07 / 1.95 1.07 / 1.95 1.07 / 3.1 • \"programGuide Basic\" for easyDimensions / Weight programming via graphical cycleoverall dimensions (LxWxH) 3200 x 2100 3700 x 2100 4200 x 2100 masks, plus a practical contour x 2200 x 2200 x 2200 calculatorweight kg 2700 3000 3500Part No. with Fagor 8055i A-TC 180 173 180 174 180 175 • The Sinumerik 808 D Software package for the PC simplifies handlingPart No. with Siemens 808D control 180 190 180 191 180 192 of the control. It can be used as practical training software to program and simulate workpieces offline. This software is included in the standard equipment and can also be used for presentation purposes.For more information and optional accessories, visit www.knuth.de 99

F Sheet Metal WorkFolding MachineSBS E 2020/2,0 Specifications SBS E 2020/2,0 max. bending capac. ST 45 mm 2,0 2020 max. bending length mm 0 - 135° 910 inf. var. bending angle 2565 x 560 x 1265 1020• segmenting: working height mm 131 367 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 200, 270, 400 and 400 mm dimensions (LxWxH) mm• lever for the swivel movement of the weight kg bending beam Part No.Folding MachinesSBS 1020/2,5 • SBS 1270/2,0 • for formed component bending • compression spring for top beam counterbalance • cam lock and rebound spring for bending beam counterbalance • bow handle for bending beam rotation • adjustable bending angle stop with scale up to 135° • segmented top beam tools • segment sizes - SBS 1020/2.5: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 270 mm - SBS 1270/2.0: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250, 270 mm Specifications SBS 1020/2.5 SBS 1270/2.0 max. folding cap.St 42 mm 2.5 2.0 max. folding length mm 1020 1270 max. folding angle 135° 135° dimensions (LxWxH) mm 1348x850x1175 1598x900x1175 weight kg 285 330 Part No. 131 364 131 363For more information, visit www.knuth.de 249

F Sheet Metal Work Roller ConveyorVariable height and lenght adjustmentIdeal for everyday use• very sturdy design and flexible use Specifications mm 670 - 940 variable height mm 450 - 1300 variable length number of rollers 9 roller dimensions mm Ø 50 x 500 max. load capacity kg 130 weight kg 44 dimensions (LxWxH) mm 600 x 600 x 600 Part No. 170 179 H Sandblasting Booth SK 2 Sandblasting booth for rust removal, cleaning, degreasing, descaling, roughening, polishing, matting, deburring, hardening, etc. • sandblasting gun with replaceable ceramic nozzles • dust-tight booth, rigid steel plate construction • transparent glass viewing window • two side doors, dust-tight closure • dust exhaust connector Please note that sandblasting requires larger compressors than other compressed air jobs. Small compressors cannot produce the required power, which will lead to inadequate blasting results. Standard Equipment: air hose, work gloves, interior lighting, protective film, 4 ceramic nozzles, operator manualspare gloves SK2 Part No. Specifications SK 2 mm 890 x 660 x 400spare ceramic nozzle set (4 / 5 / 6 / 7 mm} 109 486 work space mesh 60 - 100spare ceramic nozzle 4 mm 119 494 grain sizes l/min 590spare ceramic nozzle 5 mm 119 487 air consumption bar 4-8spare ceramic nozzle 6 mm 119 488 required air pressure l 37spare ceramic nozzle 7 mm 119 489 hopper capacity kg 55 119 490 weight mm 180 arm hole openings 1/4“ air connector 109 481 Part No.For more information, visit www.knuth.de 259

F Drilling Column Drill Presses SSB 32 Xn • SSB 40 XnPowerful Universal Drill Pressesfor versatile use in the workshop• heavy cast-iron construction with thick-walled column• thread-cutting feature is standard• automatic drill feeds are activated and deactivated via electromagnetic clutch• including coolant system and work lamp• table rotates and swivels ±45°• 2-step motor (SSB 32 Xn)• head swivels ±45°, adjustable height (SSB 32 Xn)• digital speed (rpm) display (SSB 32 Xn)coolant system is included SSB 40 Xn shown Standard Equipment: thread cutter, protective shield, halogen work lamp, coolant system, operating tools, operator manualFor available options for this machines, SSB 32 Xn shownvisit our website and search for SSB 32Xn or SSB 40 Xn (Product Search)Specifications mm SSB 32 Xn SSB 40 Xn throat mm 320 360drilling capacity (diam.) mm 32 40 table travel mm 415 460tapping capacity mm M 20 M 24 head travel mm 285 -table setup area mm 500 x 420 570 x 480 head swivel range ± 45° -quill stroke 160 190 table swivel range mm ± 45° ± 45°spindle mount rpm MT 4 MT 4 column diameter kW / V 120 140speed range / # mm/rev 125 - 3030 / 12 60 - 2300 / 12 motor rating mm 1.2 / 400 1,2 / 1,6 / 400feed / # settings 0.1; 0.2; 0.3 / 3 0,12; 0,24; overall dim.(LxWxH) kg 835x500x1960 965x580x2275 0,42 / 3 weight 540 550spindle nose-to-table dist. mm 630 600 Part No. 162 332 162 338spindle nose-to-foot dist. mm 1185 1195 183 For more information, visit www.knuth.de

F Column Drill Presses SSB 40 F Super • 50 F SuperProduction Drill Press withinfinitely variable speedand thread-cutting functionIdeal for single part and batch productions,for drilling, countersinking, reaming, andthread-cutting• very rigid construction with thick-walled column and large throat• infinitely variable speed adjustment with back gearing and digital speed display• 4 automatic drill feeds with electromagnetic clutch control and automatic shut-off when reaching the limit stop• motorized table height adjustments• large drilling table with circumferential coolant groove, height adjustment, and ± 45° swivel range• thread cutter is incl. with standard equipment SSB 40 F Super is showndigital drilling depth indicator Standard Equipment: thread-cutting unit, protective shield, halogen work lamp, coolant system, operating tools, operator manualFor available options for this machines, SSB 50 F Super is shownplease visit our website and search forSSB 40 / 50 F Super (Product Search)Specifications SSB 40 F Super 50 F Superdrilling capacity (diam.) mm 40 50 throat mm 340 360 table travel mmtapping capacity M 24 M 30 570 530 table swivel range mmtable setup area mm 540 x 440 580 x 460 column diameter kW / V 430 (motorized) 410 (motorized) motor rating mmquill stroke mm 190 200 overall dim. (LxWxH) kg ± 45° ± 45° weightspindle mount MT 4 MT 4 Part No. 140 180speed rpm 60 - 2600 50 - 2200 2 / 400 3 / 400feed / settings mm/rev 0.1; 0.2; 0.3; 0.4 0.1; 0.2; 0.3; 0.4 1000x650x2220 1150x680x2360 (4) (4) 500 650spindle nose-to-table dist. mm 665 590 162 337 101 668spindle nose-to-foot dist. mm 1195 1175182 For the latest specials, visit www.knuth.de

B MillingTool Milling Machine Total Price including 3-axisWF 4.2 position indicator (assembled)Heavy-duty Universal Tool Milling Machine, for tool anddie construction, form and mold construction as well asfor training use• high machining quality and maximum reliability• separate feed gears with fine gradation and rapid feeds in all axes• large work table (800 x 400 mm) and travels up to 500 x 350 x 400 mm for maximum versatility• extensive accessory package includedStandard Equipment:3-axis position indicator, millingarbors (22, 27 mm), short tool shaft(22, 27 mm), reducing sleeves(MT1, MT2, MT3, MT4), colletchuck set (includes 4, 5, 6, 8, 10,12, 14, 16 mm), drill chuck(0-6 mm diam.), Ø 1-13mm, chiptray, draw bar, anchor bolts, coolantsystem, outer arbor support forhorizontal milling, work lamp, oper-ating tools, operator manualOptions Part No. • hydraulic vise HS 125 125 024• universal swivel table 630 x 300 mm 170 313 • divider ST 130 110 960 X / Y axis swivel range: ± 30°, 103 322 Z axis swivel range: 360° • clamping tools, assorted De Luxe 14 / M12 105 295• oscillation element LK 55 (per unit) • combination snap-on punch, Ø27 / SK 40 103 905 • milling chuck Weldon ISO 40 / Ø20 mm 106 806For more information and options, visit www.knuth.de 139

X.mill 1300 shownStandard Equipment: GPlus 450 or Siemens 828 D control, tool changer with dual-arm gripper, chip conveyor, electronic hand-wheel,servo drives for all axes, pneumatic tool clamping, air conditioning, totally enclosed work space, work lamp, RS-232 and USB ports,automatic central lubrication operating tools, operator manualOptions 4th axis, see page 291Specifications mm X.mill 1300 X.mill 1500Working area mmX axis travel mm 1300 1500Y axis travel mm 700 800Z axis travel kg 650 700table dimensions mm 1400 x 710 1700 x 800table load capacity mm 1000 1500T-slots (qty x width x spacing) mm 5 x 18 x 150 5 x 22 x 135spindle nose-to-table dist. 150 - 800 170 - 870throat rpm 785 800Headstockspeed range mm/min 60 - 8000 60 - 8000spindle mount mm/min BT 50 BT 50Feed mm/minrapid feed X / Y axis 15000 15000Z axis rapid feed s 10000 10000work feed s 5 - 5000 5 - 5000Tool Carriertool stations mm 24 24tool-changing time chip / chip mm 10 10tool-change time tool / tool 3,8 3,8Accuracy kWpositioning accuracy ± 0.01 ± 0.01repeatability mm ± 0.005 ± 0.005Drive Capacities kgmain drive motor rating (cont/30 min) 11 / 15 15 / 18.5Dimensions / Weightoverall dimensions (LxWxH) 3560 x 3481 x 3071 4270 x 3413 x 3067weight 11000 14000Part No. with GPlus 450 control 182 240 182 238Part No. with Siemens 828 D control 170 092 170 09356 For the latest specials, visit www.knuth.de

B CNC Machining CNC Vertical Machining Center X.mill 1300 • 1500For machining of large, heavy parts withextra-wide rectangular guidesX.mill 1500 is shownwith GPlus Control• 24-station tool changer with fast dual-arm grippers; by servo motors for maximum reliability and precision tool changing time of 3,8 sec • pneumatic tool clamping for easy and quick tool changes • automatic central lubrication for low maintenance• machine bed and vertical guide system feature very wide • powerful headstock motors, 11 to 18,5 kW in continuous hardended and ground rectangular guideways operation• 4-track box ways in the machine bed for high table load• large high-precision preloaded ball screws are driven directly heavy-duty optionally with Siemens 828 D torsion-resistant 4-track box way cast-iron frameFor more information and options, visit www.knuth.de 57

www.alzmetall.com Catalog No. 55 Valid from April 2007

6 1 CoverSeries Alzstar and AX 2 Operator Panel 3 RPM adjustment lever (stepless) 5 4 Emergency OFF mushroom switch 1 5 Drilling depth adjustment 12 6 Feed lever (feed ON/OFF) (option) 2 7 Oil level gauge (feed gear) (option) 3 13 4 8 Short spindle 6 9 Manual cross handle 7 14 10 Machine table 8 11 Standard base plate (column drills) 9 15 12 Feed selector (option) 10 13 Drive motor 14 Drilling head 11 16 15 Casted Column 16 Table clamping 17 Table height adjustment 17 (Photo with options)

Serie AB 7 1 1 Digital Read-out 2 2 Depth Read-out (option) 3 3 Depth Programm (option) 4 4 Electr. Variator (option) 5 15 5 Motor step selector 6 6 Emergency Off mushroom switch 7 16 7 Mains switch 8 8 Manual variator (stepless) 9 17 9 Flange (option) 10 18 10 Short spindle 11 19 11 Coolant switch 12 Machine table 12 20 13 13 Coolant ”A” (option) 14 Machined base (option) 14 15 Drive Motor 16 Feed selector (4 feeds) 17 Depth setting 18 Cross handle 21 19 Calibration for depth (option) 20 Electro-magnetic feed clutch 21 Table clamping 22 22 Table height adjustment 23 Tapping reverse switch pedal (option) 23 (Photo with options)

8 Drilling Capacity 18 mm Photo with optionsBench Drilling MachinesDrilling Performance in Steel St 60 Bench drilling machineDrilling Performance in Cast-iron EN-GJL-200Drilling Capacity in Steel St 60 ALZSTAR 15-T/STapping performance in Steel St 60 15 mm in Cast-Iron EN-GJL-200 18 mm 18 mmTool taper/Short spindleZ-Travel of spindle M 12Distance Spindle to Column M 14Column DiameterTable Clamping area MT 2T-Slots, number x width x distance 80 mmDistance spindle/table min./max. 190 mmFeed(s) 65 mmNet weight approx. 300 x 240 mm 2 x 12 x 80 mmDrive System 75/357 mm manualM o t o r : n=750/1500 min-1 110 kgSpindle Rpm's: range infinitely variable 0,37 / 0,55 kW 225-4300 min-1 (variator)Standard Equipment :Main Switch (lockable) with Overload Circuit-BreakerReverse Switch for TappingInfinitely variable speed driveProtection Class IP 54Self-Locking Mushroom Button for EMERGENCY OFF switchPainting: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006Options:09. Table/Bench width x depth x height 560 x 560 x 830 mm Weight net: approx. 35 kgs12. Haloflex Machine Light, adjustable (Halogen 12 V / IP 64)45.1 Spindle protection, with electric security08. Wooden packing

9 Drilling Capacity 23 mm ALZSTAR Photo with optionsBench Drilling MachinesDrilling Performance in Steel St 60 Bench drilling machineDrilling Performance in Cast-iron EN-GJL-200Drilling Capacity in Steel St 60 ALZSTAR 23-T/STapping Performance in Steel St 60 18 mm in Cast-iron EN-GJL-200 23 mm 23 mmTool Taper (short spindle)Z-Travel of spindle M 14Distance Spindle to Column M 16Column DiameterTable Clamping area MT 2T-slots (number x width x distance) 100 mmDistance spindle/table min./max. 250 mmFeed(s) 90 mmNet weight approx. 370 x 300 mm 2 x 14 x 160 mmDrive System 125/455 mm manualM o t o r : n = 750 / 1500 min-1 155 kgSpindle Rpm's: range infinitely variable 0,6 / 0,95 kW 225-4300 min-1 (variator)Standard Equipment: Digital RPM Read-out Protection Class IP 54Self-Locking Mushroom Button for Emergency-Off Connecting plug (mounted)Reverse Switch for Tapping Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006Overload Circuit-BreakerInfinitely variable speed drive 45.1 Spindle Protection, with electric securityOptions: 08. Wooden Packing09.1 Table / Bench (weight approx. 65 kgs) width x depth x height 750 x 700 x 700 mm12. Haloflex Machine Light, adjustable (Halogen 12 V/ IP 64)25. Coolant Attachment B, separate container (33 l), with overload-protected pump and accessories

10 Drilling Capacity 23/30 mm Photos with optionsColumn Drilling MachinesDrilling Performance in Steel St 60 Column Drilling Machine Column Drilling MachineDrilling Performance in Cast-iron EN-GJL-200Drilling Capacity in Steel St 60 ALZSTAR 23/S ALZSTAR 30/STapping Performance in Steel St 60 18 mm 25 mm in Cast-iron EN-GJL-200 23 mm 30 mm 23 mm 30 mmTool Taper (short spindle)Z-Travel of Spindle M 14 M 16Distance Spindle to Column M 16 M 20Column DiameterTable Clamping area MT 2 MT 3T-Slots (number x width x distance) 100 mm 140 mmDistance spindle/table min./max. 250 mm 293 mmFeed(s) 90 mm 115 mmNet weight approx. 370 x 300 mm 514 x 360 mm 2 x 14 x 160 mm 2 x 14 x 224 mmDrive System 140/670 mm 132/724 mm manual manualM o t o r : n = 750 / 1500 min-1 175 kg 260 kgSpindle Rpm's: range infinitely variable infinitely variable 0,6 / 0,95 kW 1,0 / 1,6 kW 225-4300 min-1 225-4300 min-1 (variator) (variator)M o t o r : n = 750/1500 min-1 1,0/1,6 kWSpindle Rpm's: range 100-1800 min-1 (variator)Standard Equipment: Protection Class IP 54 Connecting Plug (mounted)Self-Locking Mushroom Button for Emergency-Off Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006Reverse Switch for TappingOverload Circuit-BreakerInfinitely variable speed driveDigital RPM Read-outOptions:12. Haloflex Machine Light, adjustable (Halogen 12 V / IP 64)25. Coolant Attachment B, separate container (33 l), with overload-protected pump and accessories45.1 Spindle Protection, with electric security08. Wooden Packing

11 Drilling Capacity 40 mm ALZSTAR Photos with optionsColumn Drilling MachinesDrilling Performance in Steel St 60 Column Drilling Machine Column Drilling MachineDrilling Performance in Cast-iron EN-GJL-200Drilling Capacity in Steel St 60 ALZSTAR 40/S ALZSTAR 40/SVTapping Performance in Steel St 60 32 mm 32 mm in Cast-iron EN-GJL-200 38 mm 38 mm 40 mm 40 mmTool Taper (short spindle)Z-Travel of Spindle M 24 M 24Distance Spindle to Column M 30 M 30Column DiameterTable Clamping area MT 3 MT 3T-Slots (number x width x distance) 120 mm 120 mmDistance spindle/table min./max. 293 mm 293 mmFeed(s) 115 mm 115 mmNet weight approx. 514 x 360 mm 514 x 360 mm 2 x 14 x 224 mm 2 x 14 x 224 mmDrive System 117/701 mm 117/701 mm manual 0,10 + 0,20 mm/RM o t o r : n = 1500 / 3000 min-1 270 kg 285 kgSpindle Rpm's: range infinitely variable infinitely variable 1,45 / 1,9 kW 1,45 / 1,9 kW 160-2250 min-1 160-2250 min-1 (variator) (variator)Standard Equipment: Protection Class IP 54 Connecting Plug (mounted)Self-Locking Mushroom Button for Emergency-Off Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006Reverse Switch for Tapping Feed overload clutch (Alzstar 40/SV)Overload Circuit-BreakerInfinitely variable speed driveDigital RPM Read-outOptions:12. Haloflex Machine Light, adjustable (Halogen 12 V / IP 64)25. Coolant Attachment B, separate container (33 l), with overload-protected pump and accessories45.1 Spindle Protection, with electric security47.1.2 Short Spindle MT4 (for ALZSTAR 40/SV only)08. Wooden Packing

12 Drilling Capacity 23 mm Photos with optionsBench- and ColumnDrilling MachinesDrilling Performance in Steel St 60 Bench Drilling Machine Column Drilling MachineDrilling Performance in Cast-iron EN-GJL-200Drilling Capacity in Steel St 60 AX 2-T/S AX 2/STapping Performance in Steel St 60 18 mm 18 mm(Pos. 20.0 + 20.1) in Cast-iron EN-GJL-200 23 mm 23 mm 23 mm 23 mmTool Taper/Short SpindleZ-travel of Spindle M 14 M 14Distance Spindle to Column M 16 M 16Column DiameterTable Clamping Area MT 2 MT 2T-Slots (number x width x distance) 100 mm 100 mmDistance Spindle/Table min./max. 250 mm 250 mmFeed(s) 90 mm 90 mmNet weight approx. 370 x 300 mm 370 x 300 mm 2 x 14 x 160 mm 2 x 14 x 160 mmDrive System 60/460 mm 140/670 mm manual manualM o t o r : n = 1500 min-1 155 kg 175 kgSpindle Rpm's: range infinitely variable infinitely variableM o t o r : n = 750/1500 min-1 0,55 kW 0,55 kW 450-4300 min-1 450-4300 min-1Spindle Rpm's: range (variator) (variator)Spindle Rpm's: range 0,6 / 0,95 kW 0,6 / 0,95 kW 125-2400 min-1 or 125-2400 min-1or 225-4300 min-1 225-4300 min-1 (variator) (variator)Drilling heads for Multi-Head Systems RFT page 30Standard Equipment:Main Switch (lockable) with Overload Circuit-BreakerSelf-Locking Mushroom Button for EMERGENCY OFF switchInfinitely variable speed driveDigital RPM Read-outProtection Class IP 54Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006

14 Drilling Capacity 40 mm Photos with optionsColumn Drilling MachinesDrilling Performance in Steel St 60 Column Drilling Machine Column Drilling MachineDrilling Performance in Cast-iron EN-GJL-200Drilling Capacity in Steel St 60 AX 3/S AX 3/SVTapping Performance in Steel St 60 32 mm 32 mm(Pos. 20.0 + 20.1) in Cast-iron EN-GJL-200 38 mm 38 mm 40 mm 40 mmTool Taper/Short SpindleZ-Travel of Spindle M 24 M 24Distance Spindle to Column M 30 M 30Column DiameterTable Clamping Area MT 3 MT 3Distance spindle/table min./max. 120 mm 120 mmT-Slots (number x width x distance) 293 mm 293 mmFeed(s) 115 mm 115 mmNet weight approx. 515 x 360 mm 515 x 360 mm 117/701 mm 117/701 mmDrive System 2 x 14 x 224 mm 2 x 14 x 224 mm manual 0,1 + 0,2 mm/RM o t o r n = 1500 min-1 260 kg 270 kgSpindle Rpm's: range infinitely variable infinitely variableM o t o r n = 750/1500 min-1 1,1 kW 1,1 kW 160-1125 min-1 160-1125 min-1Spindle Rpm's: range (variator) (variator)M o t o r n = 1500/3000 min-1 1,0 / 1,6 kW 1,0 / 1,6 kW 80-1125 min-1 80-1125 min-1Spindle Rpm's: range (variator) (variator) 1,45 / 1,9 kW 1,45 / 1,9 kW 160-2250 min-1 160-2250 min-1 (variator) (variator)Drilling heads for Multi-Head-Systems RFT, page 31Standard Equipment:Feed overload clutch (AX 3/SV)Main Switch (lockable) with Overload Circuit BreakerSelf-Locking Mushroom Button for EMERGENCY OFF switchInfinitely variable speed driveDigital RPM Read-outProtection Class IP 54Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006

16 Drilling Capacity 55 mm Photo with optionsColumn Drilling Machines Column Drilling Machine AX 4/SVDrilling Performance in Steel St 60 43 mm With 3 kW motorDrilling Performance in Cast-Iron EN-GJL-200 55 mm 45 mmDrilling Capacity Steel St 60 55 mm 55 mm 55 mmTapping Performance in Steel St 60 M 30(Pos. 20.0 + 20.1) in Cast-Iron EN-GJL-200 M 36 M 42 M 56 MT 4Tool Taper/Short Spindle 140 mmZ-Travel of Spindle 300 mmDistance Spindle to Column 145 mmColumn Diameter 615 x 430 mmTable Clamping Area 150/735 mmDistance spindle/table min./max. 2 x 14 x 224 mmT-Slots (number x width x distance) 0,1 + 0,3 mm/RFeed(s) 380 kgNet weight approx.Drive System infinitely variableM o t o r n = 750/1500 min-1 1,8 / 2,9 kW 70-1200 min-1Spindle Rpm's: range (variator)M o t o r n = 1500 min-1 infinitely variable with 2-step gear boxSpindle Rpm's: range 3,0 kW 70-2400 min-1Drilling heads for Multi-Head-Systems RFT, page 31 (variator)Standard Equipment :Main Switch (lockable) with Overload Circuit-BreakerSelf-Locking Mushroom Button for EMERGENCY OFF switchInfinitely variable speed driveDigital RPM Read-outProtection Class IP 54Feed Overload ClutchLacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006

18 Drilling Capacity 30/40 mm Photos with optionsColumn and Semi-Box ColumnDrilling Machines Column Drilling Machine Column Drilling Machine Semi Box Column Drilling Machine AB 26/SV AB 34/SV AB 34/HSTDrilling Performance in Steel St 60* 26 mm 34 mm 34 mmDrilling Performance in Cast-Iron EN-GJL-200* 30 mm 40 mm 40 mmDrilling Capacity in Steel St 60* 30 mm 40 mm 40 mmTapping Performance in Steel St 60* M 20 M 24 M 24(Pos. 20.0 + 20.1) in Cast-Iron EN-GJL-200* M 24 M 30 M 30Tool Taper/Short Spindle MT 3 MT 4 MT 4Distance Spindle to Column 293 mm 300 mm 330 mmTable Clamping Area 515 x 360 mm 615 x 430 mm 742 x 460 mmT-Slots, number x width x distance 2 x 14 x 224 mm 2 x 14 x 224 mm 2 x 14 x 224 mmDistance spindle/table min./max. 90/675 mm 138/688 mm 267/931 mmColumn Diameter/Box Column Dimensions 115 mm 145 mm 290 x 325 mmZ-Travel of Spindle 160 mm 160 mm 160 mmFeed(s) 0,1-0,2-0,3-0,4 mm/R 0,1-0,2-0,3-0,4 mm/R 0,1-0,2-0,3-0,4 mm/RNet weight approx. 440 kg 470 kg 760 kgDrive System infinitely variable infinitely variable infinitely variableM o t o r n = 750/1500 min-1 1,0 / 1,6 kW 1,4 / 2,2 kW 1,4 / 2,2 kW 120-2200 min-1 100-1800 min-1 100-1800 min-1Spindle Rpm's: range (variator) (variator) (variator)M o t o r n = 500/1500 min-1 0,5 / 1,5 kW 0,6 / 1,8 kW 0,6 / 1,8 kW 80-2200 min-1 70-1800 min-1 70-1800 min-1Spindle Rpm's: range (variator) (variator) (variator)Drilling heads for Multi-Head-Systems RFT, page 31 AB 26/SV AB 34/SV Standard with Autodigit Autodigit AutodigitStandard Equipment: Automatic Drill Depth Control 1,0 / 1,6 kW 1,4 / 2,2 kW with:Electro-magnetic feed clutch with Electrical 120-2200 min-1 100-1800 min-1 Simple Drill Depth program-Cross Handle Switches (variator) (variator) ming, interval drilling and freeMain Switch (lockable) with Overload Circuit-Breaker (incl. item 37.3) (incl. item 37.3) cutting possibility. Settings byFeed Overload Clutch means of Digi-Pot, DigitalSelf-Locking Mushroom Button for EMERGENCY OFF switch Read-Out, includes Position 37.1Infinitely variable speed driveDigital RPM Read-outProtection Class IP 54Motor Protection Class ‘’F’’ (155 degr. C)Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016,alu RAL 9006*) Drilling performance and capacity only with motor 750/1500 min-1

20 Drilling Capacity 50 mmColumn and Semi Box Column Photos with optionsDrilling Machines Column Drilling Machine Semi Box Column Drilling Machine AB 40/SV AB 40/HSTDrilling Performance in Steel St 60 40 mmDrilling Performance in Cast-Iron EN-GJL-200 46 mm 40 mmDrilling Capacity in Steel St 60 50 mm 46 mm 50 mmTapping Performance in Steel St 60* M 30(Pos. 20.0 + 20.1) in Cast-Iron EN-GJL-200* M 36 M 30 M 36Tool Taper / Short Spindle MT 4Distance Spindle to Column 300 mm MT 4Table Clamping Area 615 x 430 mm 330 mmT-Slots , number x width x distance 2 x 14 x 224 mm 742 x 460 mmDistance spindle/table min./max. 147/688 mm 2 x 14 x 224 mmColumn Diameter/ Box Column Dimensions 145 mm 267/931 mmZ-Travel of Spindle 160 mm 290 x 325 mmFeed(s) 0,1-0,2-0,3-0,4 mm/R 160 mmNet weight approx. 450 kg 0,1-0,2-0,3-0,4 mm/R 760 kgDrive System infinitely variable infinitely variableM o t o r n = 750/1500 min-1 1,8 / 2,9 kW 100-1600 min-1 or 1,8 / 2,9 kWSpindle Rpm's : range 1) min-1 200-3200 min-1 100-1600 min-1 or range 2) min-1 (variator) 200-3200 min-1 (variator)M o t o r n = 750/1500 min-1 1,8 / 2,9 kW with gear 1,8 / 2,9 kW range 3) min-1 70-4000 min-1 with gearDrilling heads for Mulit-Head Systems RFT, page 31. (variator) 70-4000 min-1 (variator)Standard Equipment: AB 40/SV Autodigit Standard with AutodigitElectro-magnetic Feed Clutch with ElectricalCross Handle Switches 1,8 / 2,9 kW Automatic Drill Depth ControlControl and Light Transformer 24 Volts 100-1600 min-1 or with:Main Switch (lockable) with Overload Circuit-Breaker 200-3200 min-1 Simple Drill Depth program-Self-Locking Mushroom Button for EMERGENCY OFF switch ming, interval drilling and freeFeed Overload Clutch (incl. Pos. 37.3) cutting possibility. Settings byContactor Control for Clockwise Spindle Rotation means of Digi-Pot, DigitalInfinitely variable speed drive Read-Out, includes Position 37.1Digital RPM Read-outDigital RPM SettingProtection Class IP 54Motor Protection Class ‘’F’’ (155 degr. C)Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006

22 Drilling Capacity 60 mm Photos with optionsColumn and Semi Box ColumnDrilling MachinesDrilling Performance in Steel St 60 Column Drilling Machine Semi Box Column Drilling MachineDrilling Performance in Cast-Iron EN-GJL-200Drilling Capacity in Steel St 60 AB 50/SV AB 50/HSTTapping Performance in Steel St 60 50 mm 50 mm(Pos. 20.0 + 20.1) in Cast-Iron EN-GJL-200 60 mm 60 mm 60 mm 60 mmTool Taper/Short SpindleDistance Spindle to Column/Box column M 42 M 42Table Clamping Area M 60 M 60T-Slots, number x width x distanceDistance spindle/table min./max. MT 4 MT 4Column Diameter/ Width of Box Column 350 mm 330 mmZ-Travel of Spindle 720 x 510 mm 742 x 510 mmFeed(s) 2 x 14 x 224 mm 2 x 14 x 224 mmNet weight approx. 138/874 mm 260/922 mm 200 mm 280 mm 200 mm 200 mm 0,15-0,2-0,3-0,36 0,15-0,2-0,3-0,36 605 kg 850 kgDrive System: infinitely variable with gear boxM o t o r n = 1500/3000 min-1 3,6 / 4,3 kW 3,6 / 4,3 kW 60-1530 min-1 or 60-1530 min-1 orSpindle Rpm's: range d1) min-1 50-1280 min-1 50-1280 min-1 range d2) min-1 (variator) (variator)Standard Equipment:Electro-magnetic Feed Clutchwith Electrical Cross Handle SwitchesMain Switch (lockable) with Overload Circuit BreakerOverload Feed ClutchSelf-Locking Mushroom Button for EMERGENCY OFF switchInfinitely variable speed driveDigital RPM Read-outProtection Class IP 54Grinded Base Plate with T-Slots (AB 50/SV)Built-in Machine LightLacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006

24Drilling Capacity 45/20 mm Photos with optionsCNC Column and Semi BoxColumn Drills Column Drilling Machine Semi Box Drilling Machine Column Drilling Machine AC 32 AC 32-HST AC 32-turretDrilling Performance in Steel St 60 32 mm 32 mm 20 mmDrilling Performance in Cast-Iron EN-GJL-200 40 mm 40 mm 23 mmDrilling Capacity in Steel St 60 45 mm 45 mm 20 mmTapping Performance in Steel St 60 M 24 M 24 M 16(Pos. 20.0 + 20.1) in Cast-Iron EN-GJL-200 M 30 M 30 M 20Tool Taper/Long Spindle/Steep Taper MT 4 MT 4 ST 30Distance Spindle to Column 322 mm 330 mmTable Clamping Area 614 x 370 mm 600 x 535 mm 614 x 370 mmT-Slots (number x width x distance) 2 x 14 x 224 mm 2 x 14 x 224 mm 2 x 14 x 224 mmColumn Diameter 145 mm - 145 mmBox Column Dimensions - 240 x 250 mm -Z-Travel of spindle 180 mm 180 mm 160 mmFeed(s) 1-3000 mm/min-1 1-3000 mm/min-1 1-3000 mm/min-1Net weight approx. 515 kg 860 kg 550 kgMachining cyclesDrilling Tapping Counter-sinking/ Step drilling Intermittent Deep hole Drilling Drill-Tapping Backfacing Facing feedDrive System: infinitely variable – combined with 2-step automatic clutchM o t o r n = 1500 min-1 3 kW 3 kW 3 kW 55-5000 min-1 55-5000 min-1 55-5000 min-1Spindle Rpm'sCNC Column and-Semi Box AC 32/G AC 32/G-HSTTapping Machine 2,6 / 3,2 kW 2,6 / 3,2 kWCNC-Rigid Tapping and Drilling 150-1000 min-1 150-1000 min-1 150-2000 min-1 150-2000 min-1M o t o r n = 1500/3000 min-1Spindle Rpm’s: For tapping For drilling (Both ranges included)

26 Flow Drilling Capacity 12 mmColumn Drilling Machine for Flow drilling Photo with optionsFlow Drilling Capacity in Steel St 12.03(sheet metal thickness 2,5 mm) Column Drilling MachineTapping Performance in Steel St 12.03 ALZFLOW 30/S(Pos 20.0)Drilling Capacity in Steel St 60 12 mmTapping Performance in Steel St 60 M 12(Pos 20.0) Performance in Cast-iron EN-GJL-200 30 mmTool Taper (short spindle)Z-Travel of Spindle M 16Distance Spindle to Column M 20Column DiameterTable Clamping area MT 3T-Slots (number x width x distance) 140 mmFeed(s) 293 mmNet weight approx. 115 mm 515 x 360 mmDrive System: 2 x 14 x 224 mm manualM o t o r n = 750/1500 min-1 260 kgSpindle Rpm's: range infinitely variable 1,0/1,6 kW 225-4300 min-1 (variator)Standard Equipment:Self-Locking Mushroom Button for EMERGENCY OFF switch Protection Class IP 54Reverse Switch for Tapping Connecting Plug (mounted)Overload Circuit-Breaker Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006Infinitely variable speed driveDigital RPM Read-outOptions:12. Haloflex Machine Light, adjustable (Halogen 12 V / IP 64)20.0 Tapping Attachment, w/o foot switch, max. 6 tapped holes per minute, automatic reverse25. Coolant Attachment B separate container (33 l), with overload-protected pump and accessories45.1 Spindle Protection with electric security08. Wooden Packing

27 Flow Drilling Capacity 20 mm Photos with optionsColumn Drilling Machine for Flow drillingFlow Drilling Capacity in Steel St 12.03 Column Drilling Machine Semi Box Column Drilling Machine(sheet metal thickness 2,5 mm)Tapping Performance in Steel St 12.03 AB-FLOW 40/SV AB-FLOW 40/HST(Pos 20.0) 20 mm 20 mmDrilling Capacity in Steel St 60 M 20 M 20Tapping Performance in Steel St 60 Column Drilling Machine for Flow Drilling(Pos 20.0) in Cast-Iron EN-GJL-200 40 mm 40 mmTool Taper/Short Spindle M 30 M 30Z-Travel of Spindle M 36 M 36Distance Spindle to ColumnColumn Diameter/Box Column Dimensions MT 4 MT 4Table Clamping Area 160 mm 160 mmT-Slots, number x width x distance 300 mm 330 mmDistance spindle/table min./max. 145 mm 290 x 325 mmFeeds 615 x 430 mm 742 x 460 mmNet weight approx. 2 x 14 x 224 mm 2 x 14 x 224 mm 147/688 mm 267/947 mmDrive System: 0,1-0,2-0,3-0,4 mm/R 0,1-0,2-0,3-0,4 mm/R 470 kg 780 kgM o t o r n = 1500 min-1 infinitely variable infinitely variableSpindle Rpm's: range 4) min-1 4,0 kW 4,0 kW 140-4000 min-1 140-4000 min-1 with gear box with gear box (variator) (variator)Standard Equipment: Infinitely variable speed drive Digital RPM Read-outElectro-Magnetic Feed Clutch with electrical Electrical Regulation of Spindle Rpm’scross handle switch Protection Class IP 54Control and Light Transformer 24 Volts Motor Protection Class ‘’F’’ (155 degree C))Main Switch (lockable) with overload Circuit-Breaker Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016, alu RAL 9006Self-Locking Mushroom Button for EMERGENCY OFF switchFeed Overload Clutch sibility. Settings by means of Digi+Pot,Contactor Control for clockwise spindle rotation Digital Read-Out 45.1 Spindle Protection with electric securityOptions: 50.6 Precision Depth Adjuster and fixed Stop precision adjustment to 0,1 mm12. Haloflex Machine Light, adjustable 07. Wooden Packing (Halogen 12 V / IP 64) (AB 40/HST) 08. Wooden Packing20.0 Tapping Attachment, automatic reverse (AB 40/SV) w/o foot switch, max. 6 tapped holes per minute Further Options Page 2125. Coolant Attachment B separate container (33 l), with overload-protected pump and accessories37.3 Automatic Drill Depth Control with: Simple Drill Depth programming, interval drilling and free cutting pos-

28 Drilling Capacity 45 / 50 mm Photo with optionsRadial Drilling Machines AB 30/R-1000 AB 30/R-1400 G in connection with 3,0 Drive AB 30/R-1000 AB 30/R-1400 kW motor, Pos. 42.6 is Gear Box 1000 mm 1400 mm recommended Distance Spindle to columnDrilling Performance in Steel St 60 32 mm 40 mm Motor n = 1500 min-1 1,5 kW 50 mmDrilling Performance in Cast-iron EN-GJL-200 45 mm 50 mmDrilling Capacity in St 60 45 mm Spindle Rpm’s 40-56-80-112-160-224-315-450- or 630-900-1250-1800 min-1Tapping Performance in Steel St 60 M 30 or 28-40-56-80-112-160-224-315- 450-630-900-1250 min-1(Pos. 20.1) in Cast-iron EN-GJL-200 M 42 56-80-112-160-224-315-450- 630-900-1250-1800-2500 min-1Tool Taper/Short Spindle MT 4Diameter of Column 220 mm Motor n = 1500 min-1 3,0 kW Gwith AB 30/R - 1400 300 mmTravel Motor 0,75 kW Spindle Rpm’s 56-2500 min-14 Feeds (mm/r) 0,15-0,2-0,3-0,36 mm/RZ-Travel of Spindle (vide Pos.54) 160 mmNet weight approx. 1250 kgwith AB 30/R-1400 1650 kgStandard Equipment:Electromagnetic Feed Clutch with cross handle switches Self-Locking Mushroom Button for EMERGENCY OFF switchContactor Control for Clockwise Spindle Rotation incl. motor pro- Coolant Base Platetection circuit breaker for spindle motor and feed motor Main Switch, lockableControl Transformer (VDE 0113) Protection Class IP 54Feed Overload Clutch Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016Options:12.1 Protected Tube Light incl. Lamp 50.6 Precision Depth Adjuster and fixed stop20.0 Tapping Attachment precision adjustment to 0,1 mm max. 6 tapped holes per minute, incl. smooth-start 53.2 Portable Boxed Clamping Table, length 560 mm, clutch in gear box width 480 mm, height 500 mm clamping area at22. Light Transformer, for special voltages, not necessary top 560 x 480 mm, with 3 T-slots 14mm, at distance with 230 V or 400 V, with usable 0-conducter and light 150 mm /clamping area at side 560 x 330 mm, with voltage 230 V, only with pos.12.1 2 T-slots 14 mm, at distance 150 mm Weight 200 kgs24. Coolant Attachment A, integrated in standard base plate with overload-protected pump 54. Spindle Travel 200 mm and accessories 58. Central Clamping System28. Electrically Controlled Free-cutting System when depth is reached cutter remains for a controllable for sliding drill unit = mechanic time in position. Incl. time-limit relay, and feed brake. for column and arm = pneumatic/hydraulic 58.1 Central Clamping system42.6 G Outboard support (an extra build-in switch will cut for sliding drill unit and arm = mechanic circuit to elevating motor when outboard support is locked) for column = pneumatic 01. Special Lacquer, DD-polished45.1 Spindle Protection, with electric security 02. Special Lacquer, DD-structured47.2.1 Long Spindle MT 4 with key bore DIN 1807 Packing: on wooden bars at no costs

29 Drilling Capacity 40 mmRapid Radial Drilling Machine Photo with optionsDrilling Performance in Steel St 60 ALZRAPID 32Drilling Capacity in St 60Drilling Performance in Cast-iron EN-GJL-200 30 mm 40 mmTapping Performance in Steel St 60 32 mm in Cast-iron EN-GJL-200 M 24Tool Taper/Short Spindle M 30Z-Travel of SpindleZ-Travel of Column (motorized) MT 4Travel of Drill Unit with Bellow Cover* 150 mmwithout Bellow Cover* 400 mmClamping Table at Front: 600 mm 725 mm width x depth x height T-Slots number x size x distance 1175 x 525 x 830 mmBase Plate at Rear Side: 4 x 18 x 140 width x depth x height T-Slots number x size x distance 1175 x 525 x 130 mm3 Automatic Feeds 4 x 18 x 140Net weight approx. 0,1-0,2-0,3 mm/R 2300 kgDrive System: Gearbox SwitchM o t o r n = 1500/3000 min-112 Spindle Rpm's 1,0 / 1,5 kW 102/152/204/250/304/408/500 608/816/1000/1216/2000 min-1Standard Equipment: Manual fine feed system Radial Drilling Machines Tool ejection deviceSelf-Locking Mushroom Button for EMERGENCY OFF switch Main Switch lockableProtection class IP 54 Socket for coolant attachmentElectromagnetic Feed Clutch with 2 pushbutton keys (on/off) Hydraulic central clampingTapping attachment with double reverse speed Machine LightContactor control for clockwise spindle rotation Lacquer: DD-structured grey RAL 7035, anthracite RAL 7016Control transformer (VDE 0133)Drill chuck 5-20 mm with taper arbor B 22 03. Levelling elements (1 set = 6 Pieces) for machine baseSpindle Protection with electric security 43.5 Cube Table: at rear side, fixOptions: width x depth x height: 600 x 420 x 300 mm 4 sides machined25. Coolant attachment B, consisting of: T-slots: no. x size x dist.: 3 x 18 x 140 mm separate tank, pump with motor protection switch, and 2 x 18 x 140 mm complete accessories 43.7 Table: at rear side, swivelling width x depth x height: 510 x 315 x 830 mm37. Position display and stepped clamping clamping and swivelling area machined of R- and A-axis consisting of: swivelling area: +/- 90 degrees counter unit radial with monochrom LCD-screen, T-slots: no. x size x dist.: 3 x 14 x 120 mm linear measuring system friction wheel system, edge Packing: on wooden bars at no costs probe KT 130, step 0,005 mm resp. 0,001° as standard, permitted room temperature 0 to 45° C incl. assembly and calibration, stepped clamping of R- and A-axis * you have to decide, when you order