ACDC FULL MAIN CATALOGUE

LIMIT LEVEL SENSORS Capacitive Level Switch Submersible Level Switch Thru Wall Level Switch Flexible Level Switch For detection of bulk solid, For level detection of water in For liquids limit level sensing For limit level sensing of liquids fragmental and extruded wells, boreholes, reservoirs on non-conductive (glass or in non-conductive plastic and materials and tanks plastic) guage pipes, tubes glass vessels and tank wallsCode CLS-53N-* CLS-23S-11-D-S* GPLS-25N-*-A-S FLD-48NMounting G1½” Threaded Suspended by Cable *0 - Tube Mounting Ø15-50mm Surface-Self Adhesive *1 - Flat SurfaceSupply Voltage 20-230VAC/DC (SAC Version) 6-30VDC 6-30VDC 6-30VDC 7-36VDC (P/N Version)Output Type * Add Output Type to code: * Add Output Type to code: NO or NC Programmable NO or NC Programmable O: NO (Low Level)Switching Current SAC: NO (2-Wire); C: NC (High Level) P: PNP; N: NPNSettings 0.3A (SAC) 40mA Max 40mA Max 40mA MaxAmbient Temperature 0.2A (P/N) (To switch miniature relay only) (To switch miniature relay only) (To switch miniature relay only)Protection Simple sensitivity setting by - Simple sensitivity setting by Configuration and adjustmentHousing Material means of magnetic pen (incl) means of magnetic pen (incl) by third programming wire (incl)Cable -20° to 60°C -20° to 70°C -20° to 80°C -10° to 60°CDimensions IP65 IP68 IP67 IP67 Polypropylene Plastic Polypropylene Plastic Polypropylene Polyurethane Un-wired connector socket PVC 2 x 0.75mm x 10m PVC 2 x 0.34mm x 3m PUR 3 x 0.14mm x 3m Self-Adhesive Layer LED Can be attached Cable Sensor to curved min Ø200 Surfaces Tank WallWiring Diagrams& Application Low Level Applies to: LEVEL CONTROL & PUMPS GPLS-25N-0 CLS-23S-11-D-SO Closed Straps Included CLS-23S-11-D-SO Open Applies to: GPLS-25N-1 High Level Self-Adhesive CLS-23S-11-D-SC Closed Max Wall Thickness: Conductive Liquids: 8mm CLS-23S-11-D-SC Open Non-Conductive Liquids: 3mm Above configurations 50 suggested for fail safe operation PRO

ANALOGUE ULTRASONIC LEVEL DETECTION For continuous no-contact level measurement of various liquid and bulk solid materials in closed or open vessels, sumps, reservoirs etc. Output Type 0,2 - 2m 0,25 - 6m Sensing Distance 0,5 - 20m 0,4 - 10m ULM-53L-20-I Factory Set Non-Adjustable Output Type IP68 c/w 5m Cable ULM-53L-20-U ULM-53L-20-M 4 - 20mA (2-Wire) ULM-53L-02-I ULM-53L-06-I ULM-53L-10-I 0 - 10V (3-Wire) ULM-53L-02-U ULM-53L-06-U ULM-53L-10-U ULM-53N-20-I Modbus RS-485 Output ULM-53L-02-M ULM-53L-06-M ULM-53L-10-M ULM-53N-20-U Field Adjustable Output Type IP67 c/w Connector Socket ULM-53XI-20-I 4 - 20mA (2-Wire) ULM-53N-02-I ULM-53N-06-I ULM-53N-10-I Suitable for explosive areas 0 - 10V (3-Wire) ULM-53N-02-U ULM-53N-06-U ULM-53L-10-U (combustible gases or vapours) Explosionproof Field Adjustable Type - Must be used with IRU-420 (Below) c/w Connector Socket II 2G Ex ia IIA T5 with isolating repeater (IRU–420) 4 - 20mA (2-Wire) ULM-53XI-02-I ULM-53XI-06-I ULM-53XI-10-I the whole level meter – zone 1 EX Rating Suitable for explosive areas Suitable for explosive areas Suitable for explosive areas (combustible gases or vapours) (combustible gases or vapours) (combustible gases or vapours) II 1/2G Ex ia IIB T5 with II 1/2G Ex ia IIB T5 with II 1/2G Ex ia IIA T5 with isolating repeater (IRU–420) the isolating repeater (IRU–420) the isolating repeater (IRU–420) whole level meter – zone 1, front whole level meter – zone 1, front the whole level meter – zone 1, head part – zone 0 head part – zone 0 front head part – zone 0 Mounting Type G1\" G1½\" Polypropylene Aluminium Alloy Flange Supply Voltage 18 - 36VDC Accuracy -30° to 70°C -30° to 60°C Ambient Temperature ULM-53L-02 0.20% ULM-53L-06 Dimensions ULM-53N-02 ULM-53N-06 ULM-53N-10 ULM-53L-10 ULM-53N-20 ULM-53L-20LEVEL CONTROL & PUMPS Isolating Repeater - for use with ULM-53XDI Wiring Diagrams Code IRU-420-I-* IRU-420-H-* IRU-420-U-* Input Signal 0/4 - 20mA 4 - 20mA 4 - 20mA Output Signal 0/4 - 20mA 4 - 20mA 4 - 20mA Bi-directional Trans Communication signal NO YES NO HARTTM *Add Voltage to Code: 24V (18-30VAC/18-40VDC) 230V (60-230VAC/85-230VDC) II(1)G[EEx ia] IIB /IIC I(M1)G[EEx ia] I (versions with RS-485 Output)51 PRO

HYDROSTATIC LEVEL TRANSMITTERS• Excellent repeatability and long term stability• Cable with intergrated air tube for atmospheric referenceCode LMP632-*-** LMP633-*-** LMP638-*-** LMP836-*-** LMP633X-A-**Analogue Output 4 - 20mA**Add sensing range to code 107L x Ø16 * Add output to code: A (4 - 20mA), V (0 - 10V) 5 (0-5m), 10 (0-10m)Overload Pressure • Small diameter 2 (0-2m), 5 (0-5m)Supply Voltage • For level 2 (0-2m), 5 (0-5m), 10 (0-10m) PTFEMedia Temperature 128L x Ø28 0.1%F.S.Accuracy measurement in 1.5 x Full Scale • Suitable for corrosive YesLCD Display vessels with mediaHousing Material restricted space 12 - 30VDC • For use in sewage SS304Size (L x Ø) mm treatment or with 169L x Ø28 (probe)Features ˗10°C to 70°C aggressive liquids • High accuracy • LCD display on 0.5%F.S connection box No SS304 169L x Ø28 140L x Ø39 • Standard type • Capacitive ceramic • Suitable for level sensor with high resistance against measurement in aggressive media wells or open water or ground water • For use with viscous or pasty media level measurement BOREHOLE DEPTH TESTER Borehole Depth Tester The water level meter is portable, sturdy and extremely reliable. Specifications Used for measuring water levels in tube wells, boreholes, tanks, etc. Probe Material: Stainless steel AISI 303 Description Code (scale 1m) Code (scale 10cm) Cable Reel Material: Steel Battery: 9 Volt, alkaline, type 6LR61 or similar 50 metre tester BDT-050 BDT-050/10 Features 100 metre tester BDT-100 BDT-100/10 150 metre tester BDT-150 BDT-150/10 • Integrated electronics with both light and sound indication 1m 200 metre tester BDT-200 BDT-200/10 10cm • Low power consumption • Long battery life 250 metre tester BDT-250 BDT-250/10 • Temperature insensitive • Probe 10mm Ø VALVE & CONTROLLER FOR DUST COLLECTOR SYSTEMS Board Only Complete with BoxCode MOD-320/S MOD-420/S Code MOD-320/B MOD-420/B 2-40 Steps Type 2-10 Steps 2-40 StepsType 2-10 Steps 195 x 130mm Size 250 x 200mm 320 x 250mm LEVEL CONTROL & PUMPSSize 195 x 130mmSpecifications• Supply voltage: 110V or 220V ±10%, 50/60Hz • Pulse Duration Range of Adjustability: 20-200ms• Pulse Frequency Range of Adjustability: 2-60sec • Number of sequenced steps: 2-10 steps• Fuse: 3A 250VAC • Operating Temp: 0-60°C Solenoid Valve (for air only) Volts RDA20SC2 RDA20SC1 RDA25SC2 RDA25SC1 Spare Coil Code Volts 230VAC 110VAC 230VAC 110VAC RDA-230VAC Dimensions 20mm 20mm 25mm 25mm Specifications RDA-110VAC • Medium pressure 6kgs/cm2 • Material: Aluminium • Medium Temperature 90°C • Supplied complete with coil PRO 52

THERMAL DISPERSION FLOW SWITCHES Type Compact Model High Temp Model Economy Model • Measures the velocity of liquid 40.5mm 72.5mm 69mm inside a pipe or channel 31mm 31mm 31mm • High sensitivity and accuracy • Can be calibrated for liquids with different density and purity • Pmax: 100 Bar Code SP200-0-BU-*-2 SP202-L-BU-*-2 SP220-0-BU-*-2 Output Type: N: NPN Open Collector (400mA Max) N: NPN Open Collector (400mA Max) N: NPN Open Collector (400mA Max) P: PNP Open Collector (400mA Max) P: PNP Open Collector (400mA Max) P: PNP Open Collector (400mA Max) *Add to Code: A: NO (1A@30VDC) A: NO (1A@30VDC) A: NO (1A@30VDC) B: NC (1A@30VDC) B: NC (1A@30VDC) B: NC (1A@30VDC) Connection Thread Measuring Range ½” NPT ½” NPT ½” NPT Operating Voltage Water: 1 - 150 cm/s / Oil: 3-300 cm/s Water: 1 - 150 cm/s / Oil: 3-300 cm/s Water: 1 - 150 cm/s / Oil: 3-300 cm/s Operating Temperature 19-30VDC 19-30VDC 19-30VDC Protection Degree -20° to 80°C -20° to 120°C -20° to 80°C Housing Material IP67 IP67 IP65 Connection Type SUS304 SUS316L SUS304/Plastic 4-Pole M12 Connector (c/w 2m Cable) 4-Pole M12 Connector (c/w 2m Cable) 4-Pole M12 Connector (c/w 2m Cable) LED Indication Wiring Diagrams 3 Wire 4 Wire FLOW SWITCHES FOR WATER & AIR Flow Switches for Water Flow Switch for Air Bargraph Panel Meter Paddle: Paddle: 48 x 144 140 x 25mm 175 x 80mm Bezel FS-80 FS-2533 AS-2614 PM5022R3 / PB-1471 1B94M-B • Housing Material: • 3 Different Paddle lengths, • H ousing material: PM5022R3 • Input: 4-20mA ABS (IP64) with steelbase • Input: 4 - 20mA • Display: 0-100% Aluminium (IP65) 57, 88 & 167mm Paddle material: • 4 point alarm (HH, H, L, LL) • Accuracy: 1% Tinned S/S • Response Time: <500mS Paddle Material: • H ousing material: Brass Lever relay outputs (5A, 250VAC) • Size: 96 x 24mm and 4-20mA output • Cutout: 92 x 23mmLEVEL CONTROL & PUMPS 304 S/S ABS (IP64) • Switch: SPDT, 16A@230VAC • Scaling function (0-1099) • Complete with • O perating Temperature: ­ • Alarm delay: 230/24VDC power supply • S witch: SPDT, Paddle material: 304 S/S on/off 0-3 sec adj. -20 to 80 °C­ • U nder/over range indication 1A @ 230VAC • S witch: SPDT, 16A@230VAC • Min cut-in value 2m/sec • Accuracy 0.1% • Min cut-out value 1m/sec • B uilt in 24VDC sensor voltage • O perating temperature: ­ • Connecting: • Weight: 400g • See page 51 & 52 for • Spare Paddle: AS-PADDLE Level Sensors -30 to 150 °C­ 1” PT screw Brass • O perating Max Pressure: • Operating temperature: ­ 355 PSI -20 to 120 °C­ • Pressure drop allowance: • Operating pressure Max: 3 PSI 10kg/cm2 • S et point tolerance: ±25% • S et point tolerance: ±25% • Repeatability difference: ±5% • R epeatability difference: ±5% • Connecting: 1” PT screw • For piping 1” to 8” • Weight: 850g • Adjustable setting • Spare Paddle: • Weight: 660g FS-80 PADDLE • Spare Paddle: FS-2533 PADDLE53 PRO

IRRIGATION Irrigation Controllers The ESP Modular Irrigation Controller is a 4 station timer with 3 independant programmes easily expanded up to 13 stations by adding \"Plug In\" 3 station expansion models. Code Description ESP-4M Outdoor Irrigation Controller ESP-4MI Indoor Irrigation ControllerESP-4M Accessories Description RSD-BEX Code 3 Station plug-in expansion module - order separately ESP-SM3 Rain sensor c/w mounting bracket RSD-BEX ESP-SM3 • 3 programmes with 4 starts per program • \"Hot Swappable\" plug-in modules • MOV surge protectors fitted to inputs/outputs • 230VAC input/ 25.5VAC @ 1A output • Water budget feature accessible without re-programming Micro Mist Controllers - 230VAC supply, 24VAC Output Code Description TE MARK 1 Micro mist control,Timer only TE MARK 3 Micro mist control, Timer, Leaf & Solar Control (leaf excluded) Accessories LEAF 1 Code Description LEAF 1 Leaf Sensor for Controllers - order separately Solenoid Valves Code Description EV100 24VAC Solenoid Valve - 25mm, 8 bar 25VAW Transformer for Solenoid Valves Code Description 25VAW 230/24 25VA 230/24VAC with Flying Leads 25VAP 25VAW 400/24 25VA 400/24VAC with Flying LeadsEV100 25VAP-24-T 25VA 230/24VAC Plug Type Inline Filters Code Description WL-1L 1 Litre Water Filter - 25mm Inlet/Outlet WL-1SF Spare 1 Litre replacement cartridge (unwashable) • Max Pressure: 5 Bar • Max Temperature: 35℃ Valve Boxes Code Description VB1419-13B 300 x 450mm Lockable rectangular Valve Box VB610 150mmØ Non-Lockableround Valve BoxVB1419-13B VB610 VB910-12 250mmØ Lockable round Valve Box INLINE WATER TIMERS LEVEL CONTROL & PUMPS 120 min Mechanical Timer 7 Day Digital Timer 7 Day Analogue Timer DialCode WM-1000 AML-080C AML-1037B Mechanical 2 x AA 1.5V (Excl) 2 x AA 1.5V (Excl)Power SupplyNo. of Programs – 6 Programs 1 ProgramFeatures Set watering time and open tap. Water Quick, easy programable .Seasonal budget. Selectable time, duration and cut-off when time elapses (¾\" couplings). Adjusts program duration (0-200%) cycle (up to 7 days) ESP 54

PUMP ACCESSORIES Max. Working Pressure: 8 Bar Hydrospheres Bursting Pressure: 25 Bar Code Description Spare Bladders TNK24 24 litre vertical Pump Mounting BLA24 BLA24H TNK24H 24 litre horizontal Free Standing BLA24H BLA50 TNK24/50 TNK24H-SS 24 litre Stainless Steel horizontal Free Standing BLA50H BLA100 TNK50 50 litre vertical Free Standing BLA200 BLA300 TNK50H 50 litre horizontal Free Standing BLA500 TNK24H-SS TNK100 100 litre vertical Free Standing TNK200 200 litre vertical Free Standing TNK300 300 litre vertical Free Standing TNK500 500 litre vertical Free Standing To be used with PS-02A 2.8 pressure switch Brass Connectors Float Switches Code Description Code Description 3WAY 3-way Brass Connector FLO-1 FLO-1 3 metre 8A Float Switch 1C/O 5WAY 5-way Brass Connector FLO-2 3 metre 8A Float Switch 1C/O 3WAY 5WAY • c /w weight Flexible Hose • Internal Micro Switch FLO-2 Code Description FLO-5 UKV70-AB Float Switch FH60 1'' BSP x 60cm long flexible hose (s/s) Code UKV70-AB GGE6R Pressure Gauge Temp. -30°C to 80°C & 10R Code Description Contacts 4A @ 250VAC N/O Mercury Switch GGE6B GGE6R 40mmØ 6Bar Pressure Gauge, rear Float Switch & 10B GGE6B 40mmØ 6Bar Pressure Gauge, bottom GGE10R 40mmØ 10Bar Pressure Gauge, rear Code FLO-5 GGE10B 40mmØ 10Bar Pressure Gauge, bottom Temp. -30°C to 80°C Contacts 4A @ 250VAC N/O Mercury Switch CON Pressure Switches Pressure (Bar) Min. Max. Code 1.4 2.8 Contact Rating Pipe Thread (NPT) PS-02A PS-02B PS-02A 2.8 2.1 3.5 2 Pole 20A N/C 1/4'' PS-02A 3.5 2 Pole 20A N/C 1/4'' PS-02A 4.3 2.8 4.3 2 Pole 20A N/C 1/4'' PS-02B 5.6 2 Pole 20A N/C 1/4'' PS-02B 7.2 3.5 5.6 2 Pole 20A N/C 1/4'' 4.9 7.2 Pressurestat Assembled to a pump it supplies constant pressure. Electronic ­controls ­prevent starting in the absence of water, and the reduction of water hammer. Does not require any maintenance or air – p­ re-charge.LEVEL CONTROL & PUMPS Applications: • Specially designed for the automatic supply of water to one or more buildings. Also suitable for ­ operation with water containing a small quantity of sand. • Replaces the use of costly h­ ydrospheres and pressure switches in many systems. DSK-1 Code DSK-1 DSK-1.1 DSK-2 DSK-2.1 Voltage 240V 240V 230V 230V Amps 10A 10A 10A 10A Protection IP65 IP65 IP65 IP65 Max. Pressure 10 bar 10 bar 10 Bar 10 Bar Starting Pressure 1.5 bar 1 - 3 bar (Adj) 1.5 Bar 1.5 - 2.5 Bar (Adj) Stopping Pressure The Max given by the pump Differential Pressure DSK-2 Max. Flow ≥ 0.7 Bar ≥ 0.7 Bar ≥ 0.7 Bar ≥ 0.5 Bar DSK-2.1 12m3/h 112m3/h 12 m3/h 12 m3/h DSK-1.1 Max. Building Height 15m 15m 15m 15m Inlet Thread Ø 1\" male 1\" male 1'' male 1'' male Outlet Thread Ø 1\" male 1\" male 1'' male 1'' male55 ESP

POOL BOXES Swimming Pool Control Boxes - Wired, comprising DIN isolator, circuit breakers & timer plus double wound lighting transformer & socket outlet if selected. Suitable for incandescent and LED underwater lights. 16A Underwater Lighting socket Timer Enclosure outlet No Light 120VA Trf 300VA Trf Rating (vinyl pools) 1 x 100W Inc 2 x 100W Inc 6 x 15W LED 12 x 15W LED BND SBX-8 BND SBX-1 BND SBX-6 BND SBX-1 SD SBX-6 SD SBX-2 No SD SBX-8 SD SBX-1 SUL SBX-6 SUL SUL SBX-8 SUL SBX-1 TH SBX-6 TH SBX-4A/5A SBX-2 BND - cover removed IP42 TH SBX-8 TH SBX-2 SD - (Indoor) SBX-2 SUL - SBX-1/3/6/7/8 BND - SBX-2 TH - IP55 SBX-4 BND SBX-5 BND (Weatherproof) Yes SD - SBX-4 SD SBX-5 SD SUL - SBX-4 SUL SBX-5 SUL SBX-4 TH SBX-5 TH TH - SBX-4A BND SBX-5A BND SBX-4A SD SBX-5A SD BND - SBX-4A SUL SBX-5A SUL SBX-4A TH SBX-5A TH No SD - SUL - TH - BND - Yes SD - SUL - TH - Note: IP42 Enclosure - ABS with hinged transparent cover over the breakers and timers IP55 Enclosure - DMC with sliding lift off front cover Spa/Jacuzzi Boards IP42 Code Description SPA D/B Board no wiring: C/w DIN isolator, 2x20A CB's, 1x4kW contactor & 24 hour timer SBX-3 For Jacuzzis with no light: C/w isolator, pump CB & timer, plus 20A CB & relay for heating SBX-7 POOL FILTERS Pool Filter PL-500S Code - Top Valve Code - Side Valve Filter Area Max Flow Rate Sand PL-500 PL-500S 0.22m² 10.8m³/h 85kg / 2 bags PL-650 PL-650S 0.31m² 15.3m³/h 145kg / 4 bags PL-700 PL-700S 0.39m² 19.2m³/h 210kg / 5 bagsPL-500 Accessories • Suitable for residential pools and fish ponds • Maximum working pressure: 200kPa Code Description • Easy to use multi-port valve allows easy selection HT-815 Top mount valve 1½\"/ 50mm unions of valve / filter operations. HT-915 Side mount valve 1½\"/ 50mm unions • Valve / filter operations: filter, backwash, rinse,HT-815 HT-915 waste, closed, recirculate. • Valve connections: 1½/ 50mm BOREHOLE ACCESSORIES Base Plates Safety Rope 4-Core Submersible Cable Code Description Code (per meter) Size Code (per meter) Size P115-B 32mm Pressed Metal SR-7 7mm² A430 2-5mm² LEVEL CONTROL & PUMPS P116 40mm Pressed Metal SR-10 10mm² A431 4mm² P117 50mm Pressed Metal SR-12 12mm² A432 6mm² A433 10mm² A434 16mm²Size Gate Valves Non-Return Non-Return Valve Full Way PVC Valves Valve with Filter Ballcock Valve15mm GV001 NRV01 HV00120mm GV002 NRV01F NRV02 FB001 HV00225mm GV003 NRV02F NRV03 FB002 HV00332mm GV004 NRV03F NRV04 FB003 HV00440mm GV005 NRV04F NRV05 FB004 HV00550mm GV006 NRV05F NRV06 FB005 HV006 NRV06F FB006 ESP 56

SWIMMING POOL PUMPS 2 YEAR WARRANTY Silen Pumps Tifon 1 ON SILEN PUMPS Code kW HP Volts H (m) H (ft) (excl. non-plastic mechanical parts (Bearing & Mech Seals)) SILEN 50M 0.37 0.5 230V 20 70 SILEN 75M 0.55 0.75 230V SILEN 100M 0.75 1.0 230V 15 60 SILEN 150M 1.12 1.5 230V SILEN 100 0.75 1 400V 10 50 SILEN 150 1.12 1.5 400V 40 5 30 0 0 200 300 20 0 10 H (m) H (ft) 0 60 100 200 300 400 500 600 700 Q(l/1') 50 5 10 15 20 25 30 35 40 Q(m3/h) 40 Quiet running single-stage 15 30 Code Volts kW HP c­ entrifugal pump, self-priming up 10 20 to 4m. 150 10 TIFON1 200 400V 1.5 2 100 TIFON1 200M 230V 1.5 2 Features TIFON1 300 400V 2.2 3 TIFON1 300M 230V 2.2 3 • Complete with pre-filter and 5 75 clear cover. 50 • Mechanical seal. 00 100 200 0 Features • Suction and discharge Ø 2 1/4'' 300 400 Q [I /1'] • Quiet running single stage pump • Self priming 0 3 6 9 12 15 18 21 24 Q [m3/h] • c/w Pre-filter • Inlet/Outlet size: 2 3/4'' Materials Accessories Materials • Pump body, pump foot, diffuser, impeller and seal mounting in technopolymer. • Pump body, pump foot, diffuser, impeller • Motor shaft stainless steel. • Mechanical seal in graphite and aluminium. and seal mounting in technopolymer. • Motor shaft stainless steel. • Mechanical seal in graphite and aluminium. • Motor housing in aluminium. SILEN COVER Motor SILEN O-RING • Built-in thermal overload protection on single phase models. • Motor housing in aluminium. • Class F insulation. Motor • IP55 protection. • IP55 protection • Continuous rated • Continuous operation. SILEN COUPLING • Class F insulation • Single phase with built in thermal protection Application Application • Specially designed for the recycling and • Recycling and filtering of large pools. filtering of s­ wimming pool water. SILEN BASKET Piscis (230V) H (m) H(ft) Nadorself H (m) 12 40 16 Code 60 PISCIS3 50M 10 35 12 40 PISCIS3 70M 30 8 8 20 25 400 6 20 4 300 4 15 2 10 2 3-50 3-70 5 00 0 200 400 600 800 1000 1200 Q(l/1') 00 50 100 150 200 250 300 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 Q(m3/h) Q(l/1') 0 5 10 15 20 25 30 35 40 Q(m3/h) Flow Rate kW HP Code Volts kW HP 20-250l/min 0.37 0.5 NADOR 300M 230V 3 4 NADOR 300 20-300l/min 0.56 0.75 NADOR 400 400V 3 4 400V 3.4 4.5LEVEL CONTROL & PUMPS Features Features Quiet running single stage centrifugal pumps for the recirculation of water in Single impeller centrifugal pump specifically designed for jet-stream aquariums and fish hatcheries. currents with flows up to 75m3/h with 2 drainage spouts on hydraulic casing. Adjustable impulsion. Inlet/outlet size: 2 1/2'' Materials • Pump body and pump foot in glass loaded polypropylene. Material • Impeller in glass loaded noryl. • Pump casing & base, diffuser, impeller and seal mounting in technopolymer. • Mechanical seal in graphite and steatite. • Stainless steel drive shaft (A1S1 420). • Metallic parts in 316 stainless steel. • Mechanical seal in graphite and aluminium. • Shaft in 316 stainless steel and iron • Motor housing in aluminium Motor Motor • IP55 protection • Continuous rated • IP55 protection • Continuous rated • Class F insulation • Single phase with built in thermal protection • Class F insulation • Built in thermal protection Application Application • Specially designed for operation in sea water and to be resistant to fish excrement. To swim against the current in public or private swimming pools.57 ESP

PER Single-stage CAST-IRON CENTRIFUGAL PUMPS BAT1 Twin Impeller JET CEN1 & 2 Single-Stage230V kW HP 230V kW HP 230V 400V kW HP 400V kW HPPER 50M 0.37 0.50 JET 100M 0.75 1.00 CEN1 100M – 0.75 1.0 BAT1 310 2.2 3PER 100M 0.75 1.00 1.5 Features CEN1 160M CEN1 160 1.1 2 BAT1 400 3 4 Features Self-priming centrifugal pumps with 3 ­venturi system. Self-priming up to 9m. CEN2 210M CEN1 210 1.5 BAT1 550 4 5.5 Suction and discharge Ø: 1'' female.Centrifugal peripheral pumps – CEN2 300 2.2 BAT2 750 5.5 7.5specially designed to get highperformance with low power. Materials MaterialsMaterials Materials • P ump body and pump motor ­support • Pump body and pump motor• P ump body and pump motor • Pump body in cast iron. in cast iron. support in cast iron. • Pump motor support in aluminium. support in cast iron. • Impeller in noryl or brass. • Shaft in stainless steel. • Motor shaft in stainless steel.• Impeller in brass. • Diffuser and Venturi system in noryl • Twin impellers in brass alloy.• Built-in mechanical seal. reinforced with fibreglass. • Impeller in noryl reinforced with• Motor shaft in stainless steel. • Built-in mechanical seal. fibreglass for CEN1 and CEN2 • Built-in mechanical seal.• Metallic fan cover. • Motor shaft in stainless steel. pumps. • Metallic fan cover.• Fan in plastic material. • Metallic fan cover. • Fan in plastic material.Inlet/Outlet size: 1'' • Fan in plastic material. • Brass impeller available on request. • Inlet: 1¼\" • Outlet: 1\" • Built-in mechanical seal. • Metallic fan cover. • Fan in plastic material. Inlet/Outlet Size: 1\"H (m) H (ft) H (m) H (ft) H (m) H (ft) H (ft) H (m)8070 250 50 50 150 100 30060 200 40 150 40 8050 150 30 100 30 100 604030 100 20 20 40 10020 50 10 50 50 2010 100 10 20 30 40 50 60 Q (l0/m) 0 0 10 20 30 40 50 Q (0l/m) 0 25 50 75 100 125 150 175 200 Q 0(l/m) 0 40 80 120 160 200 240 280 Q (l0/m) 0 1 2 3 Q (m³/h) 1 2 3 Q (m³/h) 0 3 6 9 12 Q (m³/h) 0 3 6 9 12 15 Q (m³/h) 0 0 0 0 NOR1 NOR2 H (m) H(ft) 40 150 NOR1 300 100 30 50 NOR1 200 20 10230V 400V kW HP 230V 400V kW HP 0 200 300 400 0 0 100 500 Q(l/1') NOR2 350M NOR2 350 2.2 3NOR1 200M NOR1 200 1.5 2 NOR2 400M NOR2 400 3 4 0 10 20 30 Q(m3/h)NOR1 300M NOR1 300 2.2 3 NOR2 550 4 5 NOR1 LEVEL CONTROL & PUMPS FeaturesFeatures H (m) H(ft) For applications requiring high flows 40 150Centrifugal pumps that combine at low or medium pressure.medium head with medium highdelivery. Quiet operation. 30 100Materials Materials• P ump body and pump motor sup- • Pump body and pump motor supportport in cast iron. in cast iron. 20• Motor shaft in stainless steel. • Motor shaft in stainless steel. NOR2 550 50 10 NOR2 400• Impeller in brass alloy. • Impeller in cast iron.• Built-in mechanical seal. • Built-in mechanical seal. NOR2 350• Metallic fan cover. • Metallic fan cover. 00 0 100 200 300 400 500 600 700 Q(l/1')• Fan in plastic material. • Fan in plastic material. 0 10 20 30 40 Q(m3/h)Inlet/Outlet size: 2'' Inlet: 3'' Outlet size: 2'' NOR2 ESP 58

MULTI-STAGE BOOSTER PUMPS Inlet/Outlet: 1\" ASPRI 15 - Quiet running multi-stage centrifugal pumps. Built-in self- Max. Temp.: 35℃ priming valve, not very sensitive to the impurities. Self-priming up to 9m. H (m) H (ft) Inlet/Outlet: 1\" 45 175 Max. Temp.: 35℃ Code ASPRI ASPRI ASPRI ASPRI ASPRI ASPRI 30 15-5 150 15-3M 15-3 15-4M 15-4 15-5M 15-5 15 15-4 125 Inlet/Outlet: 1¼\" kW 0.37 0.37 0.55 0.55 0.75 0.75 100 Max. Temp.: 35℃ HP 0.50 0.50 0.75 0.75 1.00 1.00 15-3 75 V 230 400 230 400 230 400 50 Inlet/Outlet: 1½\" Q-I/min 5-50 5-50 5-50 5-50 5-60 5-60 25 Max. Temp.: 35℃ H(m) 33-17m 33-17m 44-21.5m 44-21.5m 53-17m 53-17m 00 Inlet/Outlet: 1\" Application Max. Temp.: 35℃ 0 20 40 60 Q(1/m) 0 0.5 1 1.5 2 2.5 3 3.5 4 Q(m3/h) 59 To work with clean water in domestic applications, irrigation, and hydro-pneumatic sets. ASPRI 25 Quiet running multi-stage centrifugal pumps. Built-in self-priming valve, H (m) H(ft) not very sensitive to the impurities. Self-priming up to 9m. 225 Code ASPRI ASPRI ASPRI ASPRI ASPRI 60 200 25-3M 25-4M 25-4 25-5M 25-5 40 kW 0.75 0.92 0.92 1.12 1.12 20 175 HP V 0.56 1.25 1.25 1.50 1.50 5 150 230 230 400 230 400 4 125 3 100 75 50 25 Q-I/min 15-105 15-120 15-120 15-120 15-120 00 20 40 60 80 100 120 0 56-20m Q(l/1') H(m) 33-17m 43-14.5m 43-14.5m 56-20m 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 Q(m3/h) Application To work with clean water in domestic applications, irrigation, and hydro-pneumatic sets. ASPRI 35N - Quiet running multi-stage centrifugal pumps. Built-in self-priming valve, not very sensitive to the impurities. Self-priming up to 9m. H (m) H(ft) 80 270 Code ASPRI 35-5N ASPRI 35-6N 70 6 240 60 5 210 kW 1.50 2.20 50 4 HP 2.00 3.00 40 3 180 V 400 400 30 150 Q-I/min 20-150 20-150 20 120 H(m) 68-30m 81-37m 10 90 60 30 Application 0 60 80 100 120 0 To work with clean water in domestic and industrial applications, irrigation, 0 20 40 3 45 67 140 Q(l/1') 012 8 Q(m3/h) and hydro-pneumatic sets. ASPRI 45N - Quiet running multi-stage centrifugal pumps. Built-in self- H (m) H(ft) priming valve, not very sensitive to the impurities. Self-priming up to 9m. 60 50 40 200 30 Code ASPRI 45-4N ASPRI 45-5N 20 180 10 kW 1.50 2.20 0 160 HP 2.00 3.00 0 V 400 400 0 5 140 Q-I/min 25-250 25-250 4 120 H(m) 48-11m 61-15m 100 3 80 60 40 20 50 100 150 200 250 Q(l/1')0 2 46 Application 8 10 12 14 16 Q(m3/h)LEVEL CONTROL & PUMPS To work with clean water in domestic and industrial applications, irrigation, and pressure sets. TECNOPRES 15 H(m) H(ft) Quiet running horizontal multi-stage centrifugal pumps, with self-priming 45 175 valve resistant to impurities, dry run protection and device to ensure 30 pressure water supply. Self-priming up to 9m. 15 150 Code TECNOPRES 15/4M TECNOPRES 15/5M 00 20 125 0.55 0 0.5 1 kW 0.75 0.75 5 HP 230 1.00 V 5-50 230 4 100 Q-I/min 44-21.5m 5-60 75 H(m) 53-17m 50 Application 25 0 40 60 Q(l/1') 1.5 2 2.5 3 3.5 4 Q(m3/h) To supply water at pressure in domestic applications. With protection to prevent the pump from operation when dry. ESP

MULTI-STAGE BOOSTER PUMPSInlet/Outlet: 1\" TECNOPRES 25 - Quiet running horizontal multi-stage centrifugal pumps, with self-priming valve resistant toMax. Temp.: 35℃ impurities, dry run protection and device to ensure pressure water supply. Self-priming up to 9m. Code TECNOPRES 25/4M TECNOPRES 25/5M H(m) H(ft) kW 225 HP 0.92 1.12 V 1.25 1.50 200 Q-I/min 230 230 60 175 H(m) 15-120 15-120 43-14.5m 46-20m 150 Application 40 5 125 To supply water at pressure in domestic applications. With protection to 100 prevent the pump from operation when dry. 20 4 75 50 25 00 0 20 40 60 80 100 120 Q(l/1') 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 Q(m3/h)Inlet/Outlet: 1\" TECNOSELF 15 - Quiet running horizontal multistage centrifugal pumps,Max. Temp.: 35℃ with self-priming valve resistant to impurities. Self-priming up to 9m. H (m)Inlet/Outlet: 1\"Max. Temp.: 35℃ Code TECNOSELF TECNOSELF TECNOSELF TECNOSELF 15/4M 15/4 15/5M 15/5Inlet/Outlet: 1\" kW 45Max. Temp.: 35℃ HP 0.55 0.55 0.75 0.75 30 5 V 4 0.75 0.75 1.00 1.00 230 400 230 400 Q-I/min 5-50 5-50 5-60 5-60 15 H(m) 44-21.5m 44-21.5m 53-17m 53-17m Application 0 0 20 4 0 60 Q(1/m) To work with clean water in domestic applications, irrigation, and pressure sets. 0 0.5 1 1.5 2 2.5 3 3.5 4 Q(m3/h) TECNOSELF 25 - Quiet running horizontal multistage centrifugal pumps, with self-priming valve resistant to impurities. Self-priming up to 9m. H (m) H(ft) Code TECNOSELF TECNOSELF TECNOSELF TECNOSELF TECNOSELF 225 25/3M 25/4M 25/4 25/5M 25/5 200 60 175 150 kW 0.75 0.92 0.92 1.12 1.12 5 125 HP 1.00 1.25 1.25 1.50 1.50 40 V 230 230 400 230 400 20 4 100 Q-I/min 15-105 15-120 15-120 15-120 15-120 75 50 H(m) 33-17m 43-14.5m 43-14.5m 56 - 20m 56-20m 25 Application 00 0 20 4 0 60 80 100 120 Q(1/m) 0 1 2 3 4 5 6 7 Q(m3/h) To work with clean water in domestic applications, irrigation, and pressure sets. TECNOPLUS - Horizontal multistage centrifugal pump H H(ft) with electronic regulation ESD (Espa Speed Driver) and (kPa) H (m) 120 speed control with pressure sensor included; built in with 350 100 dry running protection. No maintenance required and without water hammer in the installation. 300 30 80 Code kW HP V Q-I/min H(m) 250 60 TECNOPLUS M 0.55 0.75 230 10-50 35-15m 200 20 40 20 150 0 50 Q(1/m) Application 100 10 3 Q(m3/h) Compact unit with constant pressure for domestic 50 10 2 0 30 40 applications without fluctuations. Easy to install. Plug & 0.5 1 1.5 2 2.5 pump design. 00 0 0Inlet/Outlet: 1\" TECNOPLUS 25 - Horizontal multistage centrifugal H (m) H(ft) LEVEL CONTROL & PUMPSMax. Temp.: 35℃ pump with electronic regulation ESD (Espa Speed Driver) 60 and speed control with pressure sensor included; built in 225 with dry running protection. No maintenance required and 200 without water hammer in the installation. 175 150 Code kW HP V Q-I/min H(m) 40 125 100 TECNOPLUS 25/4M 0.92 1.25 230 45-120 40-15m 75 Application 20 Compact unit with constant pressure for domestic 50 applications without fluctuations with resulting energy saving. Easy to install. Plug & pump design. 25 00 0 20 4 0 60 80 100 120 Q(1/m) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 Q(m3/h)Note: Any ASPRI or TECHNOSELF Pump can be combined with ESPA Variable Speed Drive. This allows for combinations with greater capacity. See pg 127 ESP 60

PUMPS VIGILEX 600 DRAIN 100 Submersible pumps, vortex system for dirty water. Continuous rated. Submersible pumps for the drainage of water without solids in Built-in thermal protection. suspension. Continuous rated with built-in thermal protection. Code VIGILEX 600MA Code DRAIN 100M DRAIN 100MA With Float Switch Yes With Float Switch No Yes kW 0.75 0.75 kW 0.60 HP 1.00 1.00 Supply Voltage 230V 230V HP 0.80 Water Clean Water Clean Water Q-I/min 25-320 25-320 Supply Voltage 230V H(m) 9.2-1m 9.2-1m Water Dirty Water Q-I/min 25-240 H(m) 7.5-1m Application Application Drainage of sewage and dirty water, in domestic installations, operation in Drainage of infiltration water, empty swimming pools, decorative fountains septic tanks and small purifying installations. and waterfalls. Outlet Size: 30mm Outlet Size: 1¼\" VIGICOR 150 DRAINCOR 180/200LEVEL CONTROL & PUMPS Submersible grinder pumps for sewage water, with filaments. Submersible grinder pumps, for sewage water with filaments. Continuous rated. Built-in thermal protection. Water cooled motor. Continuous rated. Single phase version c/w thermal protection. Code VIGICOR 150MA Code DRAINCOR 180MA DRAINCOR 200 Yes With Float Switch 0.9 With Float Switch Yes No kW 1.2 kW 1.12 1.25 HP 230V HP 1.50 1.70 Supply Voltage Supply Voltage 230V 400V Water Dirty Water Q-I/min 10-140 Water Dirty Water Dirty Water H(m) Q-I/min 25-175 21-290 Application 20.2-1.2m H(m) 18-7m 21-2.5m Application Drainage of sewage and dirty water, operation in septic tanks and small Drainage of sewage and dirty water, operation in septic tanks and small purifying installations. purifying installations. Outlet Size: 1¼\" Outlet Size: 40mm61 ESP

SEWAGE PUMPS DRAINEX 100 DRAINEX 100M DRAINEX 100MA H(m) H(ft) Code No Yes 8 30 Float Switch 25 kW 0.75 0.75 6 20 HP 1.00 1.00 4 15 V 230 230 10 Max Solid 32mm 32mm 25 Q-I/min 25-280 25-281 H(m) 7-1m 7-1m 0 10 20 30 40 50 60 Q (0l/1') 0 Application 0 2 4 6 8 10 12 14 16 18 Q (m³/h) Drainage of sewage and dirty water, operation in septic tanks and small purifying installations. DRAINEX 200/ 300 Vortex Pump for Sewage Water H(m) H(ft) Code DRAINEX DRAINEX DRAINEX DRAINEX DRAINEX DRAINEX 14 45 201M 201MA 201 202M 202MA 202 40 Float Switch No Yes No No Yes No 12 35 1.12 30 kW 1.12 1.12 1.12 1.12 1.50 1.12 10 25 HP 1.50 1.50 1.50 1.50 1.50 8 20 15 V 230V 230V 400V 230V 230V 400V 6 10 Max Solid 45mm 45mm 45mm 45mm 45mm 45mm 4 201 202 5 50-500 50-500 50-500 0 Q-I/min 50-500 50-500 12.5-2.0m 14.5-2.5m 14.5-2.5m 50-500 2 400 500 Q (l/1') H(m) 12.5-2.0m 12.5-2.0m DRAINEX DRAINEX DRAINEX 14.5-2.5m 0 100 200 300 25 30 Q (m³/h) 300 302M 302MA 0 5 10 15 20 No No H(ft) Code DRAINEX DRAINEX 1.12 1.12 Yes DRAINEX 0 300M 300MA 1.50 1.50 1.12 302 H(m) 35 1.50 Float Switch No Yes No 10 1.12 kW 1.12 1.50 1.12 30 1.50 8 25 HP 1.50 V 230V 230V 400V 230V 230V 400V 6 20 Max Solid 60mm 60mm 60mm 60mm 60mm 60mm 4 15 50-500 50-500 50-500 2 10 Q-I/min 50-500 50-500 50-500 11-1.8m 11-1.8m 11-1.8m H(m) 7.1-1.8m 7.1-1.8m 7.1-1.8m 5 302 Application - Drainage of sewage and dirty water, operation in septic tanks 0 100 200 300 400 300 0 and small purifying installations. 0 5 10 15 20 25 500 600 Q (l/1') 0 30 35 Q (m³/h) DRAINEX 400/500/600 - Without Float Switch H(m) H(ft) H(m) H(ft) H(m) H(ft) 20 32 502 100 20 60 16 60 28 501 12 80 16 8 40 24 500 4 0 20 20 60 12 40 0 401 402 0 16 0 100 200 300 400 500 600 700 800 Q (l/1') 12 40 8 20 10 20 30 40 50 Q (m³/h) 8 20 4 601 4 600 0 600 800 1000 1200 Q (l/1') 00 0 200 400 0 100 200 300 400 500 600 700 800 Q (l/1') 0 0 10 20 30 40 50 Q (m³/h) 0 10 20 30 40 50 60 70 Q (m³/h) Code DRAINEX 500 DRAINEX 501 DRAINEX 502 DRAINEX 600 DRAINEX 601Note: DRAINEX 400 kW 3.70 3.70 3.70 3.70 3.70 LEVEL CONTROL & PUMPSrange available while HP 5.00 5.00 5.00 5.00 5.00stocks last V 400V 400V 400V 400V 400V Max Solid 40mm 40mm 40mm 65mm 65mm KITDR1 Q-I/min 100-810 100-750 100-600 200-1000 200-1200 H(m) 23.2-6m 27.4-12m 30.1-20m 14.8-3.4m 18-3.1m Description Pumped Liquids • Water with solids or filtered water, • Submersible mono block pumps • Perfect for draining water with solids and rainwater, infiltrations, waste water grey water, for working in septic tanks, water and non-corrosive liquids in general. with Vortex impeller for treatment facilities and apartment blocks. draining water with solids. Duckfoot & Elbow Kits - for small and large dewatering Code Description Code Description KITDR1 Duck foot 50mm for DRAINEX 200 incl KITDR4 Duck foot 65mm for DRAINEX 600 incl KITDR2 chain, rawl bolts, screws, nuts & washers chain, rawl bolts, screws, nuts & washers KITDR3 Duck foot 65mm for DRAINEX 300 incl KITDR6 Elbow 50mm for DRAINEX 400/500 incl KITDR6 chain, rawl bolts, screws, nuts & washers chain, screws, nuts, washers and feet Duck foot 50mm for DRAINEX 400/500 KITDR7 Elbow 65mm for DRAINEX 600 incl incl chain, rawl bolts, screws, & washers chain, screws, nuts, washers and feet ESP 62

STAINLESS STEEL BOREHOLE MOTORS 100mm Motors with Lead Out Cable (open end) Spare 230V (All 230V Motors are not supplied with standard control box) Control Box Code kW HP Volts Length Full Load Code (mm) Amps NF0.37 NFS4-37P 0.37 0.50 230V 296 3.9 NF0.56 NFS4-56P 326 5.0 NF0.75 NFS4-75P 0.55 0.75 230V 346 6.0 NF1.1 NFS4-110P 391 8.8 NF1.5 NFS4-150P 0.75 1 230V 436 11.8 NF2.2 NFS4-220P 456 17.0 For full range of 1.1 1.5 230V 400V Control NFS4-56V 346 1.7 Panels see page NFS4-75V 1.5 2.0 230V 346 2.2 137-138 NFS4-110V 391 3.0 NFS4-150V 2.2 3 230V 436 3.9 NFS4-220V 456 5.9 NFS4-300V 0.55 0.75 400V 582 7.2 NFS4-400V 652 9.3 NFS4-550V 0.75 1 400V 785 13 NFS4-750V 920 17 1.1 1.5 400V 1.5 2.0 400V 2.2 3 400V 3 4 400V 4 5.5 400V 5.5 7.5 400V 7.5 10 400V STAINLESS STEEL 4” BOREHOLE PUMPS Performance Chart Complete Stainless Steel construction, Impeller and Strainer Total 4SP3 Pump 230V Pump 400V Pump head (m) 4SP3/52 50Hz Only & Motor & Motor kW HP ISO 9906 Annex A 300 Performance Chart 4SP2 4SP3/45 4SP2/9 4SP2/9P — 0.37 0.50 Total 50Hz 4SP3/39 4SP2/13 4SP2/13P 4SP2/13V 0.55 0.75 head (m) ISO 9906 Annex A 250 4SP2/18 4SP2/18P 4SP2/18V 0.75 1.0 250 4SP2/48 4SP2/23 4SP2/23P 4SP2/23V 1.1 1.5 250 4SP3/33 4SP2/33 4SP2/33P 4SP2/33V 1.5 2.0 200 4SP3/29 4SP2/33 150 4SP3/22 150 100 4SP3/15 4SP2/48 4SP2/48P 4SP2/48V 2.2 3.0 4SP2/23 4SP3/12 4SP3/9 4SP3/9P 4SP3/9V 0.55 0.75 4SP3/12 4SP3/12P 4SP3/12V 0.75 1.0 100 4SP2/18 50 4SP3/9 4SP2/13 0 0 10 20 30 40 50 60 [l/min] 4SP3/15 4SP3/15P 4SP3/15V 1.1 1.5 50 4SP2/9 0 0.6 1.2 1.8 2.4 3.0 3.6 [m³/min] 4SP3/22P 4SP3/22V 1.5 2.0 4SP3/22 4SP3 4SP3/29 4SP3/29P 4SP3/29V 2.2 3.0 4SP3/33P 4SP3/33V 2.2 3.0 0 [l/min] 4SP3/33 – 4SP3/39V 3.0 4.0 0 5 10 15 20 25 30 35 40 45 – 4SP3/45V 3.0 4.0 – 4SP3/52V 4.0 5.5 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 [m³/min] 4SP3/39 4SP5/8P 4SP5/8V 0.75 1.0 4SP5/12P 4SP5/12V 1.1 1.5 4SP2 Performance Chart 4SP3/45 4SP5/17P 4SP5/17V 1.5 2.0 Total 4SP3/52 4SP5/21P 4SP5/21V 2.2 3.0 head (m) 4SP8 4SP5/25P 4SP5/25V 2.2 3.0 50Hz – 4SP5/33V 3.0 4.0 4SP8/37 ISO 9906 Annex A – 4SP5/38V 4.0 5.5 – 4SP5/44V 4.0 5.5 Performance Chart 200 4SP8/30 4SP5/8 4SP8/5P 4SP8/5V 0.75 1.0 Total 4SP5 4SP8/7P 4SP8/7V 1.1 1.5 head (m) 50Hz 4SP8/25 4SP5/12 4SP8/10P 4SP8/10V 1.5 2.0 ISO 9906 Annex A 4SP8/21 4SP8/12P 4SP8/12V 2.2 3.0 4SP5/44 4SP8/18 4SP5/17 4SP8/15P 4SP8/15V 2.2 3.0 250 150 4SP8/15 – 4SP8/18V 3.0 4.0LEVEL CONTROL & PUMPS 4SP8/12 4SP5/21 4SP5/38 100 4SP8/10 200 4SP5/33 4SP8/7 4SP5/25 50 4SP8/8 150 4SP5/25 4SP5/33 4SP5/21 4SP5/38 100 4SP5/17 4SP5/44 4SP5/12 4SP8/5 50 4SP5/8 00 30 60 90 120 150 180 [l/min] 4SP8/7 0 1.8 3.6 5.4 7.2 9.0 10.8[m³/min] 4SP8/10 0 10 20 30 40 50 60 70 80 90 100 [l/min] 4SP8 4SP8/12 0 0 0.6 1.2 1.8 2.4 3.0 3.6 4.2 4.8 5.4 6.0 [m³/min] 4SP8/15 4SP5 4SP8/18 • 2 30V Pump complete with Motor, lead out cable, Control Box 4SP8/21 – 4SP8/21V 4.0 5.5 • 400V Pump complete with Motor, lead out cable 4SP8/25 – 4SP8/25V 4.0 5.5 • Non-Return valve incorporated in pump delivery body 4SP8/30 – 4SP8/30V 5.5 7.5 • Outlet size: 1” for 4SP2 & 4SP3 range; 1.5\" for 4SP5 range; 2\" for 4SP8 range 4SP8/37 – 4SP8/37V 5.5 7.563 ESP

STAINLESS STEEL SEWAGE PUMP VN-Range Stainless Steel Sewage Pumps - 230VAC Code KW HP Head Max Outlet VN-250F 0.25 0.35 7.5m 25mm VN-750F 0.75 1.00 12m 50mm Operating Limits: • Fluid temperature up to 40°C • Max passage for suspended solids 25mm dia • Max operating depth 5m below water level • Max emptying level 40mm from the bottom Performance Range: • Flow rate up to 300ℓ/min • Head up to 12m Stainless Steel Sewage pump with Plastic Casing - 230 VAC - c/w Float Switch Code KW HP Head Max Outlet DRAFEXP 180MA 0.18 0.20 7.0m 40mm DRAFEXP 250MA 0.25 0.35 7.5m 40mm Operating Limits • Maximum operating depth 5m below water level. • Maximum fluid temperature: 40°C • Maximum emptying level 40mm from the bottom Structural CharacteristicsPV pumps are designed to lift dirty water which is not highly • Stainless steel pump body chemically aggressive to the pump components. Maximum • Stainless steel mechanical seal(Graphite to ceramic) • Stainless steel shaft passage of suspended solids Ø20mm. • Reinforced polypropylene impeller • Reinforced polypropylene pump casing and base plate • c/w Thermal overload protection Stainless Steel Sewage Pump - 230 VAC - With or without float switch Code Code kW HP Head Outlet With Float No Float Max DRAFEX 750MA DRAFEX 750M 0.75 1 10m 50mm DRAFEX 1100MA DRAFEX 1100M 1.1 1.5 9m 50mm Structural CharacteristicsThese pumps are designed to pump dirty water which is not • Stainless steel pump bodychemically aggressive to the pump ­components. In all cases • S tainless steel mechanical seal (graphite to ceramic or SiCwhere suspended solids up to Ø 30mm have to be dealt with to graphite) • Stainless steel shaft • C ast iron impeller or nylon impeller with technopolymer open type • W ith thermal overload protection. Stainless Steel Sewage Pump with Cutting System - LEVEL CONTROL & PUMPS 230 VAC - c/w Float Switch Code kW HP Head Max Outlet DRAFEX 1300MA 1.3 1.75 12m 50mm DRAFEX 1800MA 1.8 2.4 10m 50mmThis pump is designed to lift dirty water with long fibers or Operating Limitsfirm sundries. These are cut up by the cutter to avoid the • Maximum operating depth 5m below water levelimpeller becoming blocked or entangled. Suitable for use in • Maximum fluid temperature: 40°Ckitchen, sanitation, factory, mine and domestic applications. • Maximum passage for suspended solids Ø30mm • PH value in water : 4-10 ESP Structural Characteristics • Stainless steel pump body • Stainless steel mechanical seal • Cast iron impeller with cutter • Stainless steel shaft 64

STAINLESS STEEL SEWAGE PUMP Submersible Single Vane Sewage Pump - 230VAC - c/w Float Switch Code kW HP Head Max Outlet DINEX 10MA 0.75 1 10m 50mm DINEX 20MA 1.5 2 12m 50mm Operating Limits • M aximum operating depth 5m below water level • Maximum fluid temperature 40°C • M aximum passage for suspended solids ø 50mm • S upplied with 5 meter neoprene cable The DINEX submersible pump is designed to handle dirty Structural Characteristics water and sewage in domestic and civil applications. It is • Stainless steel pump body & base fitted with a s­ tainless steel single vane impeller, and is • Stainless steel motor sleeve suitable for pumping liquids containing ­suspended solids, • Stainless steel single vane impeller including short fibres. It is particularly ­recommended for the • Stainless steel motor shaft transfer of domestic sludge, effluent and surface water, • Double mechanical silicon carbide seal dirty water in areas such as: domestic housing, industrial • S ealed i­nduction motor with double ­impregnated class a­ pplications and underground car parks. F winding, designed for c­ ontinuous duty AQUARIUM / FOUNTAIN PUMPS Multi-function Submersible Pump - 230VAC Fountain/Pond Pumps with filter & LED colour Lights IP68 • Max. flow 2400 L/H. • 45 Watts • Max. head 2.3 meters Code Colour Code Large Filter Small Filter GPD-3200R/R GPD-3200R/Y • Energy Efficient FKD-3200R/R GPD-3200R/B • Long service life GPD-3200R/G • For use in aquariums or for pond water circulation FKD-3200R/Y GPD-3200Y/B GPD-3200Y/G FKD-3200R/B GPD-3200Y/Y FKD-3200 – GPD-3200 Code Head Max Flow Max Power FKD-3200R/G GPD-FILTER 1.0m 450L/h 8W FONT 08C5-2 1.2m 600L/h 10W FKD-3200Y/B FONT 10C5-2 1.6m 800L/h 17W FONT 17C5-2 2.0m 1200L/h 22W FKD-3200Y/G FONT 22C5-2 3.0m 2300L/h 55W FONT 55C5-2 3.8m 3800L/h 95W FKD-3200Y/Y FONT 95C5-2 FKD-3200B/B Spare Filter FKD-FILTER Other Aquarium Pumps Pond / Fountain Pumps Code Flow Head Watts Outlet Max Max Dia (mm) L-450BS 360L/h 0.8 8 13 Ideal for water display in gardens, L-650BS 520L/h 0.9 10 13 ponds and water features Circulation Water Pumps with filter Note: Pump & Fountain Head supplied separately c/w strainer sponge filter and power cordLEVEL CONTROL & PUMPS Code Flow Head Power Code Head Max Flow Max Power Max Max 1.4m 15L/min 18W FONT 18-09M 1.6m 15L/min 28W FK-120SC 4200L/h 6.2 1/6HP FONT 20-12M 2.6m 35L/min 50W FK-180SC 6600L/h 7.5 1/5HP FONT 21-28M 3.5m 50L/min 85W FONT 30-34M 4.1m 60L/min 120W FKD-FILTER Spare Replacement Filter FONT 36-40M * Add to Code Fountain Heads Code FONT FH-* Choose the fountain head to suit your application. Please check compatibility. Compatibility FONT 18/20 - F,G FONT 21 - A, B, C, D FONT 30/36 - A, C, E65 ESP

DRAINAGE PUMPS DRAFEX H1100MA 2VH-600F High Head Two Stage Submersible Pumps - 230VAC 2VH-600F Code Power Max Head Outlet30 25mm25 2VH-600F 600W 27m 40mm20 40mm15 DRAFEX H1100MA 1100W 20m10 5 DRAFEX H1300MA 1300W 34m 0 Features 0 20 40 60 80 Q (L/min) • Float switch for auto cut in cut out • Thermal overload protection DRENAP • Compact size, light weight and easy to use Operating Limits • Maximum operating depth 5 meter below water level • Maximum fluid temperature is 40˚C • Maximum passage for suspended solids 2mmH(m) ObuTethlbreeotytca9at0en°d Submersible Drainage Pumps - 230VAC LEVEL CONTROL & PUMPS DRENAP S Code Power Max Head Outlet Water 25mm DRENAP L5-450 450W 10m Cooled Motor - Continuous Floor pump is suitable for lifting clear and slightly dirty water not containing abrasive substances. These pumps are designed for easy use and are extremely Rating reliable even when subjected to continuous use, since the motor is fully cooled plus a double mechanical seal. Due to the capacity to drain water to 10mm, these pumps are suitable for domestic emergency use, for small flooded areas and for all those applications where maximum drainage potential is required. Structural Characteristics • Aluminium pump body • Stainless steel mechanical seal (graphite to ceramic) • Stainless steel, rubber coated impeller • With thermal overload protection Operating Limits • Maximum operating depth is 5 meter below water level • Maximum fluid temperature is 40˚C • Maximum passage for suspended solids Ø 5mm • Maximum emptying level 10mm from bottom Submersible Drainage / Fountain Pumps - 230 VAC - c/w Float Switch Code kW Head Max Flow Max DRENAP 6-6MA 0.3 5.8m 100L/min 175L/min DRENAP 10-9MA 0.42 8.8m 240L/min 100L/min DRENAP 16-10MA 0.66 9.5m DRENAPS 6-6MA 0.18 5.8m These pumps can be used to pump clean water from garages or basements, to empty swimming pools or tanks or to supply garden fountains. Operating Limits Materials • Maximum solid diameter: 5mm Pump body, impeller, handle and suction strainer in reinforced techno- • Maximum immersion depth: 7m polymer. Motor shaft in stainless steel • Maximum fluid temperature: 40˚C with sleeve protection on mechanical • Maximum ambient temperature: 40˚C seal side. Mechanical seal in ceramic and graphite. ESP 66

Submersible Garden Pumps SUBMERSIBLE PUMPS Submersible Drainage/Fountain Pumps VNOPERUWTMEPX SP400W/SP750W SPI400/SPI750 Max Flow Max Head Application230V 230V Watts 230V kW Max Max ApplicationWith Float No Float With Float Flow Head Clear WaterPlastic POP1 7m 0.25 7.2m3/HSP400W SP400W-NF 400 7.5m3/H 5m Dirty Water POP2 0.37 8.4m3/H 9m Clear Water 12.5m3/H 8m Dirty WaterSP750W – 750 POP VORTEX 0.37 8.4m3/H 7m Dirty Water 7.5m3/H 5m Dirty WaterStainless Steel 12.5m3/H 8m Dirty Water • For non-corrosive liquids • Maximum operating depth 3m below water levelSPI400 – 400 • Maximum fluid temperature 40°C • Maximum passage for suspended solids Ø 10mmSPI750 – 750 • These pumps have been designed for easy use and are extremely• Max. Liquid Temp: 35°C 1M2 reliable even when subjected to continuous use (e.g. in fountains)• Maximum Passage of • B ody made from high fibreglass reinforced ­technopolymer 9 • Stainless steel motor shaft suspended solids: 35mm • D ouble mechanical seal carbon/alumina on the pump side and sealing• Maximum depth below 6 ring on the motor side (with barrier-oil chamber to ­lubricate and cool water level: 5m the sealing surfaces in the absence of water) • S ealed induction motor, suitable for continuous duty with ­ SSPP775500WW built-in thermal cutout relay (motor protector). Resetable • H05 RN-F Neoprene submersible supply cable. Supplied ­standard with SSPP440000WW SSPPiI775500 5 metres of cable and plug • To be used in vertical position only 3 SSPPiI440000 0 0 3000 6000 9000 12000 15000L/HMulti-Stage Submersible Vortex Pump - Clear Water 230(VAC)Stainless SteelSubmersible Pump 10 8Submersible multi-stage pumps for openwells with a minimum diameter of 140mmLEVEL CONTROL & PUMPSMaterials Total head (m) 6• Outer casing ­stainless steel 4• Impellers Plastic (PC) 2• Motor shaft in stainless steel 0• Diffusers in Noryl, and glass 0 25 50 75 100 125 150 175 200 Q (m3/h) loaded polymer• Double mechanical seal in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 7 Flow rate Q graphite and alumina Code Power Max-flowMotor CLEAN450 0.45kW/0.6HP• Asynchronous, two poles 250l/min• IP68 protection• Class F insulation Clean pump is suitable for lifting clear water not containing abrasive• Continuous operation substances. These pumps are designed for easy use and are• Water cooled motor extremely reliable even when subjected to continuous use, since the• Single phase motor built-in motor is fully cooled plus a double mechanical seal. Suitable for applications where maximum drainage potential is required. thermal protection Structural Characteristics:230V With kW HP • Aluminium pump bodyFloat 0.6 0.8 • Stainless steel mechanical seal (graphite to ceramic)SR6 1.2 0.9 • Stainless steel, rubber coated impeller 1.6 1.2 • With thermal overload protectionSR9 Operating limits: • Maximum operation depth 5m below water levelSR12 • Maximum fluid temperature 40˚C67 ESP

STAINLESS STEEL PUMPSVertical Stainless Steel Submersible Pump Horizontal Stainless Steel Pump (Multi-Stage) 230V 230V kW HP With Float No Float SS400F SS400 0.37 0.5 SS700F SS700 0.75 1 • Submersible stainless steel pump 400V kW HP Inlet / Outlet • With thermal overload protection • Max. operating depth 5m below TAUPO MS2-40 0.55 0.75 G1\" TAUPO MS2-50 0.55 0.75 G1\" water level TAUPO MS2-60 0.75 1 G1½\" • Max. temp. 40°C TAUPO MS8-25 1.5 2 G1½\" • Can be used in sea water TAUPO MS8-40 2.20 3 G1½\" • Stainless steel impeller and shaft • U sed for: Domestic water; Pesticide dosing systems; Boosting & circulation systems • Liquid Temp: -15°C to +70°C • Max Pressure: 10 Bar PR Single-Stage MJ JET MSC Single-Stage 2MC25 Twin Impeller230V kW HP 230V 400V kW HP 230V 400V In-/Outlet kW HP 400V Inlet Outlet kW HPPR 50M 0.37 0.50 MJ80L – 0.60 0.80 MSC53 – 1'' 0.75 1.0 2MC25/160B 1¼\" 1\" 1.5 2PR 80M 0.75 1.00 MJ100L M100L 0.75 1.00 MSC60 MS60 2'' 1.1 1.5 2MC25/160A 1½\" 1\" 2.2 3PR 100M 1.1 1.5 MSC70 MS70 2'' 1.5 2 2MC32/200C 1½\" 1.25\" 3 41'' Inlet/Outlet 1'' Inlet/Outlet – MS80 2'' 2.2 3Description LEVEL CONTROL & PUMPS• C ast Iron pump body • S elf priming up to 8m • Cast Iron pump body • C ast Iron pump body• A ISI 420 shaft • C ast Iron pump body • S tainless Steel mechanical seal • Stainless Steel shaft and• Ceramic/graphite mechanical seal • Stainless Steel mechanical seal• Brass impeller • Brass impeller and shaft mechanical seal• Fluid Temp. up to 60°C • Hi-cr plated steel shaft • B rass impeller • Brass impellers• Max Suction Head: 8m • Fluid Temp. up to 40°C • Fluid Temp. up to 60°C • Fluid Temp. up to 60°C ESP 68

Booster Pumps PUMPS Booster Pumps c/w Pressure Tank (230V) • Ideal for domestic use • 24 litre tank Code 230V Code 400V kW HP MJS-80 MJ-80 0.60 0.80 MJS-100 MJ-100 0.75 1 Operating Limits: Code Power Suction Head Flow Rate Pressure • Suction lift up to 9m Lift Max. Max. • Fluid temperature up to 40°C • Maximum ambient temperature 40°C MJS80 AUTO 600W 9m 35m 3.0m3/h 2-2.5 Bar Pump Installation and Applications: MJS100 AUTO 750W 9m 46m 4.8m3/h 3-4 Bar • T hese pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components Compact Booster Pumps (230V) Structural Characteristics: • S tainless steel pump body & cover • S tainless steel mechanical seal (graphite to ceramic) • Brass impeller with centrifugal radial flow type • With thermal overload protector in single phase motor • 45# steel shaft Features • Automatic Start/Stop • Adjustable Start-up Pressure (1.2-2.2 Bar) • Dry Running & Locked Rotor Protection Code kW HP Head Suction Max Max. Lift Flow TGPB125 0.37 0.5 32m 8m 35l/min TGPB550 0.55 0.75 48m 9m 42l/min 9m 42l/min Garden Jet Pumps TGPB750 0.75 1 53m 9m 91l/min TGPB1100 1.1 1.5 53m Multi-stage Booster Pumps (230V) Quiet running horizontal pumps. Code kW HP PGJC-1100 MRS3 0.6 0.80 MRS4 0.75 1 SGJ-800 MRS5 0.90 1.25LEVEL CONTROL & PUMPS Code 230V kW Features Motor PGJC-1100 1.1 • P ump body in s­ tainless steel Asynchronous, two poles. SGJ-800 0.8 • Motor shaft in carbon steel • IP44 p­ rotection • Diffusers in glass filled polymer • Class F insulation • Mechanical seal in graphite and ceramic • Continuous operation • Motor housing in a­ luminium • Single phase versions up • W indings impregnated with epoxy resin • Impellers in stainless steel to 1.25 HP with built-in • 1” Inlet & Outlet thermal p­ rotection • S uction Lift up to 9m • Plastic (PPO) Impeller • Liquid Temp: 35°C Applications • 45# Steel Shaft • Ceramic-Graphite Mechanical Seal • Specially designed to work with clean water • Domestic applications • Irrigation • H ydro-pneumatic sets for the automatic ­supply of water69 ESP

Swimming Pool Pumps - 230VAC POOL & SPA PUMPSQuiet running single-stage ­centrifugal pump, Pool / SPA Pumps - 230VACself-priming up to 4m. FeaturesFeatures • Complete with pre-filter & clear cover• Pump body and diffuser in glass • Mechanical seal loaded polypropylene. • Suction and discharge: Ø 1.5” (40mm) • P ump body, filter and motor ­mounting• Impeller in glass loaded noryl• Shaft in stainless steel in polypropylene shaft in c­ arbon steel,• Graphite/Ceramic mechanical seal impeller and diffuser in Noryl• Aluminium motor housing • M otor: Built-in thermal overload protection.• 2 Pole Induction Motor• Built-in thermal protection Code kW• Insulation class F MSP350 0.35kW• Protection IPX5 MSP450 0.45kW• Continuous duty MSP COUPLING Spare 40mm Union Coupling• Application: Recycling and MSP COUPLING filtering of water in swimming pools.Code kW HP Head Max Flow Max 0.45kW 0.70 14m 17m3/hETNA10 275-4M 0.75kW 1.0 18m 21m3/hETNA10 300-4M BASKET UNIONAccessoriesCode DescriptionETNA10 BASKET Spare BasketETNA10 COVER Spare CoverETNA10 UNION Spare 40mm unionETNA10 B-GASKET Body Gasket COVERETNA10 C-GASKET Cover GasketMSP-G Pool Pumps - 230VAC Whirlpool Bathtub Pumps - 230VACFeatures FeaturesThese pumps have been designed to • Pump body, foot and diffuser in glassincorporate features that will provide loaded polypropylenereliable, efficient pump operation and • Impeller in glass loaded nyrolprovide maximum performance and • Shaft in stainless steelcorrosion resistance at a realistic cost. • Mechanical seal in graphiteIdeal for small to medium domestic and ceramicswimming pools. • Motor housing in aluminium • 2 Pole Induction Motor MSP-1100G • Built-in thermal protection MSP-1600G • Insulation class F • Continuous Duty16 • Application: Suitable for hydro-massage bathtub or spa system14121086420 0 100 200 300 400 6 12 18 24H(m) 500 L/minCode kW HP Head max 30 m³/h LEVEL CONTROL & PUMPSMSP-1100G1.1kW1.5HP11mMSP-1600G 1.6kW 2HP 16m Flow Rate Max 22m³/h 27m³/hOperating Limits• Self priming up to 8m Code kW kW Head max Flow Rate Max 300L/min• Maximum fluid temperature 35˚C VM75 0.55 0.75 9.5m 320L/min• Maximum ambient temperature 40˚C 350L/min• Maximum passage for suspended solids Ø 5mm VM100 0.75 1.0 10m• Outlet and inlet Ø 2.5'' VM120 0.9 1.2 10m ESP 70

PETROL ENGINE WATERPUMPS Code Power Inlet/Outlet Head Max. Flow Rate Max. GEP40 5.5 HP 2'' x 2'' 28m 600L/min GEP50 6.5 HP 3'' x 3'' 28m 1000L/min GEP80 8 HP 4'' x 4'' 28m 1800L/min GEP40/50/80 Operating Limits • Maximum working pressure 4 bar • Suction lift 8m • Fluid temperature up to 40˚C • Continuous duty GP centrifugal hand-carry motor pumps are particularly suitable to supply and distribute clean water for agricultural and gardening purposes when electrical connection is not possible CIRCULATING PUMPS Circulating Pumps - 230VAC CPD20/25 Code Head Max Flow rate In/ outlet CPD40-80F CPD20-40-130 4m 35ℓ/ min G1\" CPD25-40-130 4m 40ℓ/min G1½\" CPD40-80F 4m 150ℓ/min DN40 Flange Operating Limits • Fluid temperature: -10°C to 110°C • Ambient temperature +40°C • Maximum working pressure: 10Bar Structural Characteristics • Cast-iron pump body • Plastic impeller • Ceramic shaft • Ceramic bearing Motor • 2 Pole induction motor • Three adjustable speeds VANE OIL PUMPS Vane Oil Pump 230VAC Code Power Head Max Flow Rate Max MVP-370 370W 26m 2.6m3/h Low Voltage Vane Oil Pumps 12/24VDC MVO-400A Code Power Head Max Flow Rate MaxLEVEL CONTROL & PUMPS MVO-400A 400W 3m 2.4m3/h MVP-370 LC1 Accessories UR-375 AN15A Code Inlet Outlet Description MN12A AN15A 1\" 1\" Nozzle MN12A 1\" 13/16\" LC1 1\" 1\" Nozzle UR-750 1\" 1\" UR-100 1\" 1\" Litre counter (accuracy ± 2%) UR-257 1\" 1\" UR-375 1\" 1\" Hose for use with pumps (length: 5m) UR-400 – – 1'' Coupling 3/4'' Coupling Foot Valve Hose Clamp UR-750 UR-275 UR-100 UR-40071 ESP

DIESEL OIL PUMPS & ACCESSORIES Diesel Transfer Pump - 230VACPS SERIES Type PS30 Code PS70 GT KIT GT30 GT70 Pump Only VF30 PS48N VF70 With GT KIT SMT3000 GT48N SMT7000 With VF KIT 50l/min VF48N 110l/min With SMT KIT 46l/min SMT4800N 92l/min Flow Rate at pump 0.5hp 80l/min 0.75hp Flow Rate at nozzle (6m hose) 70l/min Horse Power 0.37kW 0.5hp 0.56kW Watts 0.37kW Amps 2.2A 2.5A 3A Volts 230VAC RPM 230VAC 2800 230VAC 2800 2800 Kit Type Kit IncludesVF KIT Pump Only • Self priming volumetric vane pump with built in by-pass • Cast iron bodySMT KIT GT KIT • Steel pump cover and rotor • POM plastic impeller and by-pass valves • Aluminium motor case VF KIT Basic Pump plus: • 4m anti static discharge hose with 1”-1” crimped brass connections SMT KIT • Aluminium manual nozzle Basic Pump plus: • 1.1m telescopic suction tube with 2” connection for barrel or drum • Aluminium manual nozzle • 4m antistatic discharge hose with 1”-1” crimped brass connections Basic Pump plus: • Wall mounting bracket • 3 digit mechanical flowmeter • Aluminium manual nozzle • 6m anti static discharge hose with 1”-1” crimped brass connections Diesel Transfer Pumps - 12VDC (Maximum Continuous Pumping Allowed: 20 minutes) Type Code Pump Only PS12V40L PS12V60L PS12V80L With GT KIT KITBAT12V40L KITBAT12V60L KITBAT12V80L With VF KIT VF12V40L VF12V60L VF12V80LPS12V SERIES With SMT KIT SMT12V40L SMT12V60L SMT12V80LKITBAT12V KIT Flow Rate at pump 40l/min 60l/min 80l/min Flow Rate at Nozzle (6m hose) 34l/min 48l/min 72l/min Horse Power 0.2hp 0.33hp 0.55hp Watts 140W 240W 400W Amps 16A 30A 40A Volts 12VDC 12VDC 12VDC RPM 4200 4200 3000VF12V KIT Kit Type Kit IncludesSMT KIT Pump Only GT KIT • Portable self priming diesel oil transfer vane pumps with by-pass • Cast iron pump body VF KIT • Steel pump cover plate • POM plastic impeller blades and by-pass valves • Galvanised steel motor case SMT KIT Basic Pump plus: • 4m anti static discharge hose with 1”-1” crimped brass connections • Aluminium manual nozzle Basic Pump plus: • 1.1m telescopic suction tube with 2” connection for barrel or drum • Aluminium manual nozzle • 4m antistatic discharge hose with 1”-1” crimped brass connections Basic Pump plus: • Wall mounting bracket • 3 digit mechanical flowmeter • Aluminium manual nozzle • 6m anti static discharge hose with 1”-1” crimped brass connections Accessories Code DescriptionUR6000 TL80 TL80 Automatic nozzle with F1” swivel connection and trigger lock up to 80 /m LEVEL CONTROL & PUMPS UR6000 Aluminium manual nozzle with F1” swivel connection and trigger lock up to 80 /m UR-995-257 Swivel connections for automatic nozzles (1”Male x 1” Female) UR-995-375 Drum coupling swivel UR-001 Drum coupling rigid UR300/UR400 UR-139787 4 Metre Ø20mm, 1” crimped discharge hose UR-971520 6 Metre Ø20mm, 1” crimped discharge hoseUR-139787 UR-140907 BRASS-Threaded connection (Male)1” (26/34mm) Ribbed Ø20mm UR300FM 3 Digit resettable flowmeter with oscillant disc for precise measurement of fuel. 6 Digit non resettable total counter. Max 3 bar.UR-140907 UR-995-257 UR400FM 4 Digit resettable flowmeter with oscillant disc for precise measurement of fuel.UR-001 UR-995-375 6 Digit non resettable total counter. Max 3 bar. ESP 72

Flat Pack Transformers PCB TRANSFORMERS View from bottom of Transformer Series Parallel Connections 4VA 6VA 10VA 14VA 18VA 24VA 30VA Code Volts Code Volts Code Volts Code Volts Code Volts Code Volts Code Volts FP4272 2 x 7,2 FP6272 2 x 7,2 FP10272 2 x 7,2 FP14272 2 x 7,2 FP18272 2 x 7,2 FP24272 2 x 7,2 FP30272 2 x 7,2 FP4209 2 x 9,0 FP6209 2 x 9,0 FP10209 2 x 9,0 FP14209 2 x 9,0 FP18209 2 x 9,0 FP24209 2 x 9,0 FP30209 2 x 9,0 FP4212 2 x 12 FP6212 2 x 12 FP10212 2 x 12 FP14212 2 x 12 FP18212 2 x 12 FP24212 2 x 12 FP30212 2 x 12 FP4215 2 x 15 FP6215 2 x 15 FP10215 2 x 15 FP14215 2 x 15 FP18215 2 x 15 FP24215 2 x 15 FP30215 2 x 15 FP4218 2 x 18 FP6218 2 x 18 FP10218 2 x 18 FP14218 2 x 18 FP18218 2 x 18 FP24218 2 x 18 FP30218 2 x 18 FP4224 2 x 24 FP6224 2 x 24 FP10224 2 x 24 FP14224 2 x 24 FP18224 2 x 24 FP24224 2 x 24 FP30224 2 x 24 A=19 B=53 A=23 B=53 A=29 B=53 A=25 B=68 A=29 B=68 A=32 B=68 A=36 B=68 C=44 X=5 C=44 X=5 C=44 X=5 C=57 X=6 C=57 X=6 C=57 X=6 C=57 X=6 *For more technical information contact your nearest AC/DC branch or distributor Type 30 - 1,5 VA Code Secondary Secondary Off-load PIN Configuration Eff.: 66% Temp. rise 21 °C Voltage (V) Current (MA) Voltage (V) Top View P01172 7,2 200 10,5 P01272 2 x 7,2 2 x 100 2 x 10,9 P01195 9,5 150 14,1 P01295 2 x 9,5 2 x 75 2 x 14,1 P01112 12,0 125 17,6 P01212 2 x 12,0 2 x 62 2 x 17,1 P01115 15,0 100 22,9 P01215 2 x 15,0 2 x 50 2 x 22,2 P01117 17,5 85 26,2 P01217 2 x 17,5 2 x 42 2 x 25,9 P01124 24,0 62 34,8 P01224 2 x 24,0 2 x 31 2 x 34,5POWER SUPPLIES, TRANSFORMERS & UPS Type 38 - 2 VA P02172 7,2 275 8,4 Eff.: 60% Temp. rise 24 °C P02272 2 x 7,2 2 x 137 2 x 8,4 P02195 9,5 200 11,2 P02295 2 x 9,5 2 x 100 2 x 11,1 P02112 12,0 170 14,4 P02212 2 x 12,0 2 x 85 2 x 14,1 P02115 15,0 130 17,9 P02215 2 x 15,0 2 x 65 2 x 17,1 P02117 17,5 115 20,8 P02217 2 x 17,5 2 x 55 2 x 20,2 P02124 24,0 83 28,7 P02224 2 x 24,0 2 x 40 2 x 28,8 Type 42 - 3 VA P03172 7,2 415 8,6 Eff.: 67% Temp. rise ±28 °C P03272 2 x 7,2 2 x 208 2 x 8,7 P03195 9,5 330 11,3 P03295 2 x 9,5 2 x 165 2 x 11,3 P03112 12,0 250 14,4 P03212 2 x 12,0 2 x 125 2 x 13,9 P03115 15,0 200 17,9 P03215 2 x 15,0 2 x 100 2 x 18 P03117 17,5 170 21,4 P03217 2 x 17,5 2 x 85 2 x 21,2 P03124 24,0 125 28,5 P03224 2 x 24,0 2 x 60 2 x 28,573 P1

PCB TRANSFORMERSType 48 - 5,5 VA Code Secondary Secondary Off-load PIN Configuration Voltage (V) Current (mA) Voltage (V) Top View (Footprint) Eff.: 74% Temp. rise ±30 °C P05172 760 9,4Type 54 - 10 VA P05272 7,2 2 x 380 2 x 9,2 P05195 2 x 7,2 580 12,0 Eff.: 80% Temp. rise ±35 °C P05295 9,5 2 x 290 2 x 11,7Type 60 - 15 VA P05112 2 x 9,5 450 15,1 P05212 12,0 2 x 225 2 x 15,0 Eff.: 83% Temp. rise ±38 °C P05115 2 x 12,0 360 18,7Type 66 - 22 VA P05215 15,0 2 x 180 2 x 18,9 P05117 2 x 15,0 310 21,9 Eff.: 84% Temp. rise ±42 °C P05217 17,5 2 x 155 2 x 21,9Type 78 - 40 VA P05124 2 x 17,5 230 30,2 P05224 24,0 2 x 115 2 x 30,9 2 x 24,0 P10172 1,38 10,3 P10272 7,2 2 x 0,69 2 x 10,3 P10195 2 x 7,2 1,05 11,5 P10295 9,5 2 x 0,525 2 x 13,6 P10112 2 x 9,5 0,83 17,2 P10212 12,0 2 x 0,415 2 x 14,6 P10115 2 x 12,0 0,66 17,1 P10215 15,0 2 x 0,33 2 x 21,5 P10117 2 x 15,0 0,57 21,1 P10217 17,5 2 x 0,285 2 x 25,0 P10124 2 x 17,5 0,41 28,9 P10224 24,0 2 x 0,205 2 x 28,6 2 x 24,0 8,7 P15172 7,2 2,08 2 x 9,5 P15272 2 x 7,2 2 x 1,04 11,8 P15195 9,5 1,57 2 x 11,9 P15295 2 x 9,5 2 x 0,785 14,7 P15112 12,0 1,25 2 x 14,8 P15212 2 x 12,0 2 x 0,625 18,6 P15115 15,0 1,0 18,5 P15215 2 x 15,0 2 x 0,5 23,2 P15117 17,5 0,85 2 x 23,2 P15217 2 x 17,5 2 x 0,425 29,7 P15124 24,0 0,62 2 x 31,8 P15224 2 x 24,0 2 x 0,315 9,1 P22172 7,2 3,05 2 x 9,1 POWER SUPPLIES, TRANSFORMERS & UPS P22272 2 x 7,2 2 x 1,525 11,1 P22195 9,5 2,31 2 x 12,0 P22295 2 x 9,5 1,155 14,2 P22112 12,0 1,83 2 x 15,0 P22212 2 x 12,0 2 x 0,915 17,7 P22115 15,0 1,46 2 x 18,4 P22215 2 x 15,0 2 x 0,73 20,8 P22117 17,5 1,25 2 x 22,0 P22217 2 x 17,5 2 x 0,625 27,5 P22124 24,0 0,91 2x 30,12 P22224 2x 24,0 2x 45,5 9,0 P40172 7,2 5,5 10,8 P40195 9,5 4,2 14,2 P40112 12,0 3,3 17,5 P40115 15 2,6 19,6 P40117 17,5 2,2 27,2 P40124 24 1,6 * Other voltages available on requestEff.: 86% Temp. rise ±46 °C P1 74

TRANSFORMER PARTS Description VA Bobbins Housing Lamination Code Code Code/kg EI30/10.5/1ST All pins 1 A2000 A1000 A1031 EI30/10.5/2ST All pins 1 A2001 A1001 EI30/12.5/1ST All pins 1 A2002 A1031 EI30/12.5/2ST All pins 1 A2004 A1001G* A1032 EI30/15.5/1ST all pins 1.5 A2012 A1001 S EI30/15.5/2ST pins on 1, 5, 6, 9, 10 1.5 A2007 EI30/15.5/2ST pins on 1, 5, 6, 7, 9, 10 1.5 A2008 A1002G* EI30/15.5/2ST all pins 1.5 A2010 EI30/18/2ST pins on 1, 5, 6, 7, 9, 10 1.5 or 2 A2011 EI38/13.5/2ST pins on 1, 5, 6, 9, 10 2 EI38/13.5/2ST pins on 1, 5, 6, 7, 9, 10 2 EI38/13/5 EI38/13.5/2ST all pins 2 EI38/13/6 EI38/13.5/Shroud for EI38 Bobbins 2 EI38/13/A EI38/13/S EI42/14.8/1ST 3 A2030 EI42/14.8/2ST A1003G* A1033 EI48/16.8/1ST 3 A2031 EI48/16.8/2ST EI54/18.8/1ST *Standard colour grey. Red, blue and green also available. EI54/18.8/2ST EI60/21/1ST 5.5 A2040 A1004 A1034 EI60/21/2ST 5.5 A2041 EI60/25.5/2ST EI66/23/1ST 10 A2050 A1005 A1035 EI66/23/2ST EI66/30/1ST 10 A2051 EI78/27.5/2ST 15 A2060 A1006 Pins type 213 Pins type 431 15 A2061 A1036 256 Pins type 256 15 A2062 No Housing 22 A2065 22 A2066 A1007 A1037 30 A2067 40 A2070 A1008 A1038 431 A2080 213 A2081 A1010 A2082 Mounting bracket Terminal bracket Mains Transformer Boxes (black) with pins for 15A SocketPOWER SUPPLIES, TRANSFORMERS & UPS75 Up to 10VA compact (80°C max. temp.) A1014* Up to 10VA compact to SABS IEC 60950 A1014BK-SABS Extender for use with A1014 for up to 15VA A1015* Up to 25VA with 15A plug A1010* Up to 25VA with plain cover A1009* *Add colour of box: ● BK (Black), ● R (Red), ● WH (White) A1014 Brackets Terminals Size Mounting Bracket Terminal Description Code (Reinforced Nylon) Bracket 1\" A3007 16Amp 2 Pole M16A2P 1 1/4\" A3000 A3008 3 Pole M16A3P 1 1/2\" A3001 A3009 30Amp 2 Pole M30A2P 1 3/4\" A3002 A3010 3 Pole M30A3P A3003 A3005 Insulation sleeving/metre 130°C synthetic and glass fibre A3006 Multi-Tap Terminal Brackets Diameter Code Diameter Code with 7 x 27A Terminals and shroud 0.5mm SV-0.5 4.0mm SV-4 1 1/2\" 1.0mm SV-1 5.0mm SV-5 1 3/4\" 2.0mm SV-2 10mm SV-10 3.0mm SV-3 BOB

VARIABLE TRANSFORMERS Open Type (Single Phase)LARSRGIZOEDEBRESUSSIGTN Code Supply Spare Output Power Dimensions Motor HSG260/2.5 Knobs D x WxØ Drive 230V HSN V A KVA FNC Type   98 x 142 x 117 HMA-M50 230V HSG-K6 0-260V 2,5A 0,65 HMA-M100 HMA-M250 HSG260/4.5 230V HSG-K8 0-260V 4,5A 1,17 120 x 149 x 125 – – HSG260/10 230V HSG-K10 0-260V 10A 2,60 120 x 197 x 153 – – HSG0302/230 230V HSG-K8 0-260V 13A 3,38 146 x 197 x 174 HSG260/15 230V HSG-K8 0-260V 15A 3,90 116 x 262 x 226 HSG260/20 230V HSG-K10 0-260V 20A 5,20 110 x 302 x 230 HSG260/30 230V HSG-K10 0-260V 30A 7,80 110 x 345 x 340 For vertical or horizontal mounting. Unit supplied with Knob and scale plate Spare Scale Plate Code Description HSG-L1 For 2.5 Amp HSG-L2 For 4.5, 10, 13 Amp HSG-L3 For 20, 30 Amp Open Type (Three Phase) 0-450V 2,5A 1,95 Motor Drive (230V) 0-450V 4,5A 3,51 HMA-3/M50 HTG450/2.5 400V HSG-K8 0-450V 10A 7,80 HMA-3/M100 HTG450/4.5 400V HSG-K10 0-450V 20A 15,60 HMA-3/M250 HTG450/10 400V HSG-K10 HMA-3/M400 HTG450/20 400V HSG-K10 Enclosed Type (Single Phase) Code Supply Output Power Dimensions KVA HxWxD TDGC2-1KVA 230V VA 200 x 170 x 210 0-260V 4A 1,0 TDGC2-2KVA 230V 0-260V 8A 2,0 235 x 207 x 208 TDGC2-3KVA 230V 0-260V 12A 3,0 267 x 240 x 210 TDGC2-5KVA 230V 0-260V 20A 5,0 310 x 250 x 260 Enclosed Type Amps Single Phase Volts 3 Phase Volts In Out In Out 4.5A HSN260/4.5 230 / 260 – 8A HSN260/8 230 / 260 HTN450/8 – 10A HSN260/10 230 / 260 HTN450/10 400 / 450 15A HSN260/15 230 / 260 HTN450/15 400 / 450 HTN 20A HSN260/20 230 / 260 HTN450/20 400 / 450 400 / 450 SPECIAL TRANSFORMERS POWER SUPPLIES, TRANSFORMERS & UPS Appliance Transformers Code Watts Input Volts Output Volts 230-110V FNC-200 200 110-230V 230-110V 230-110V FNC-300 300 110-230V 230-110V FNC-500 500 110-230V FNC-1000 1000 110-230V Features • Transformer that converts 220/240VAC to 110/120VAC or vice-versa • Overheat protected Audio Transformers Code Output Supply Tappings AUT100/5 0-4-8 Ohm 100V 1.5, 2.5, 3.5, 5W AUT100/12 0-4-8 Ohm 100V 12W • For Public Address Systems T1 76

POWER TRANSFORMERS SINGLE PHASE 10-20VA Single Phase-Open Type Double Wound Standard Multitaps D VA Rating Dimensions (mm) Weight kg Code W AA H D H T-10VA 60 100 65 60 0.4 H T-20VA 80 80 85 1.1 T-25VA 80 75 80 1 T-30VA 80 80 80 1,1 W T-40VA 85 90 75 1.5 AA T-50VA 85 85 90 1.5 D T-75VA 100 90 95 2.2 T-100VA 100 95 90 2.2 T-125VA 105 100 105 2.9 Typical series/parallel ­connections T-150VA T-175VA 105 100 105 2.9 Codes T-200VA T-225VA 120 120 90 3.3 Pri: 0-230-400V Pri: 0-400-525V T-250VA Sec: 12-24V Sec: 115-230V T-300VA 105 115 95 3.6 VA Terms: 0-12 Terms: 0 -115 T-350VA Rating T-400VA 120 120 90 4 25VA 0-12 0-115 105 105 115 3.8 T-25VA M1 *T-25VA M2 125 115 110 5 125 120 115 5.1 50VA T-50VA M1 *T-50VA M2 50-750VA W 138 135 110 5.8 100VA T-100VA M1 *T-100VA M2 T-500VA 160 135 140 8.3 150VA T-150VA M1 *T-150VA M2 T-600VA T-650VA 150 150 150 8.5 200VA T-200VA M1 *T-200VA M2 T-750VA 138 135 140 8.5 T-1000VA T-1500VA 140 140 150 10.2 300VA T-300VA M1 *T-300VA M2 190 190 150 15 500VA T-500VA M1 *T-500VA M2 190 190 165 17.2 T-2000VA 210 220 150 15 T-2500VA 190 190 170 17 NOTE: T-3000VA 190 190 180 20 T-4000VA 210 210 190 24 ALL VA RATINGS ARE AT AMBIENT 1000VA and above T-5000VA 230 240 210 29 TEMPERATURE 25°C Standard Voltages T-6500VA 260 260 220 36 230/12V 400/24V 525/24V T-7500VA 270 270 230 43 230/24V 400/48V 525/110V 230/48V 400/110V 525/230V T-10000VA 270 270 250 50 230/110V 400/230V T-15000VA 340 350 260 55POWER SUPPLIES, TRANSFORMERS & UPS ex stock 20-600VA NB. ALL PRICES UP TO 1000V ONLY • Autowound Transformers and other ­voltages manufactured to your order. DIN TRANSFORMERS • Isolation Transformers include earth screen and terminal and are available in all the above sizes. Optional Extras All above power ­transformers from Code Description Transformer Size 25-150VA can be supplied for direct T-EX1 Extra Tapping Under 25A ­mounting onto 35mm DIN Rail. T-EX2 Extra Tapping 25-50A To order, add prefix D. T-EX3 Extra Tapping Above 50A Example DT-100VA M1. T-FS1 Extra Fuse on Primary 1000V (10 x 85) Up to 16A T-PER1 Perspex Terminal Shield Up to 200VA T-PER2 Perspex Terminal Shield 225VA to 1kVA T-PER3 Perspex Terminal Shield 1.5-20kVA T-SCN1 Earth Screen & Terminal Up to 200VA T-SCN2 Earth Screen & Terminal 225VA to 1kVA T-SCN3 Earth Screen & Terminal 1.5-20kVA77 T1

POWER TRANSFORMERS THREE PHASE Three Phase-open type transformer Three Phase oil cooled transformer 'open bushings'Open Type KVA Rating H WD Weight KVA Rating Code Code D T-0.10KVA 170 140 100 3,5kg T5KVA T-0.15KVA 170 140 100 4,5kg T7.5KVA T-0.25KVA 210 150 110 6kg T10KVA T-0.35KVA 210 150 110 7kg T15KVA T-0.50KVA 220 170 140 9kg T20KVA 250 230 150 12kg T25KVA H T-1KVA 250 250 120 15kg T30KVA T-1.5KVA 215 225 145 22kg T40KVA T-2KVA 225 225 165 30kg T50KVA T-3KVA T-4KVA 225 235 185 36kg T75KVA T-5KVA 255 245 185 50kg T100KVA W T-6.5KVA 275 265 195 40kg T125KVAOil Cooled type (cable box cover removed) T-7.5KVA 285 265 195 60kg T150KVAAvailable in different colours (eg. Avocado T-10KVA 315 310 200 80kg T200KVAGreen/ Electric Orange) T-15KVA 359 346 200 90kg T250KVA T-20KVA 650 450 350 120kg T300KVA T-25KVA 650 450 350 165kg T-30KVA 700 500 350 200kg NOTE: T-40KVA 800 500 400 240kg T-50KVA 800 550 400 280kg ALL STANDARD PRICES T-75KVA 850 600 400 400kg ARE FOR T-100KVA 900 700 450 680kg T-125KVA 900 730 500 750kg UP TO 1000V ONLY. T-150KVA 900 750 550 850kg T-200KVA 950 800 600 900kg For above 1000V, T-250KVA 960 850 600 970kg prices on application. T-300KVA 960 850 600 970kgOptional Extras (for aircooled only)Code Transformer Size Description Code Transformer Size DescriptionT-C100 All Cable Box T-PER3 1,5-20kVA per phase Perspex shieldT-B100 > 25kVA T-SCN1 0,1-0,15kVA per phase Earth screen and terminalT-PER1 0,1-200VA per phase Breather required for all oil cooled 3 phase transformers above 25kVA T-SCN2 0,25-1kVA per phase Earth screen and terminalT-PER2 0,25-1kVA per phase Perspex shield T-SCN3 1,5-20kVA per phase Earth screen and terminal Perspex shield Motor Starting Autowound Transformers POWER SUPPLIES, TRANSFORMERS & UPS • 5 starts per hour • 50 & 65% taps Code 400V Motor H WD Weight 10kg AT-11 11kW 250 230 150 12kg 20kg AT-15 15kW 250 230 150 22kg 28kg AT-18.5 18,5kW 250 270 120 30kg 34kg AT-22 22kW 250 270 120 36kg 50kg AT-30 30kW 300 270 140 60kg 80kg AT-37 37kW 300 270 140 AT-45 45kW 360 320 150 AT-55 55kW 360 320 150 AT-75 75kW 360 320 170 AT-90 90kW 400 320 180 AT-110 110kW 440 340 200 Larger sizes available on request T1 78

UNREGULATED POWER SUPPLIES JDZ-05 VA Code Output Code Applications with rectifier + with rectifier VDC: Contactors, relays & valves Code capacitor 12VDC 24VDC only VR: Brakes & clutches ONLY JDZ-2A JDZ-5A 25VA T- 25VDC/* 2A 1A T- 25VR/* Type VDC JDZ-8A JDZ-10A 50VA T- 50VDC/* 4A 2A T- 50VR/* JDZ-20A 100VA T- 100VDC/* 8A 4A T- 100VR/* • IP20 150VA T- 150VDC/* 12A 6A T- 150VR/* • Ripple ≤5% • Fuse Protection 200VA T- 200VDC/* 16A 8A T- 200VR/* • LED 250VA T- 250VDC/* 20A 10A T- 250VR/* Input Output 300VA T- 300VDC/* 25A 12A T- 300VR/* 220VAC 24VDC 2A 400VA T- 400VDC/* 32A 16A T- 400VR/* 220VAC 5A 500VA T- 500VDC/* 40A 20A T- 500VR/* 220VAC 8A 750VA T- 750VDC/* 62A 31A T- 750VR/* 220VAC 10A 1000VA T-1000VDC/* 83A 41A T-1000VR/* 3 Phase Primary: }110, 230, 400 or 525VAC Secondary: 400VAC 20A *12 or 24VDC to be specified SPECIAL TRANSFORMERS Bell Transformers • Double wound, IP20 • DIN mounting Code Input volts Output volts VA T-87 230V 8V 8VA 0-12V 0-12V (0-24V) 10VA DT10212 230V 0-6 V 0-6V 10VA 0-12V 0-12V (0-24V) 15VA DT10612 230V 0-6V 0-6V 15VA 0-12V 0-12V (0-24V) 24VA DT15212 230V DT series DT15612 230V T-87 T-208 230V Other voltages manufactured to order. TRF15N TRF30N With End Covers Swimming Pool Lighting Transformers Code Input Volts Output Volts VA Complete with end cover & terminals 12V 120VA 12V 300VA SP-120VA 230V 120VA SP-300VA 230V 300VAPOWER SUPPLIES, TRANSFORMERS & UPS With flying leads only (open type) 120VA 300VA SP-120VA Open 230V 12V SP-300VA Open 230V 12V VA 125VA Open type With flying leads (open type) c/w Thermal Cut-out 250VA 400VA SAB-120VA 230V 12V SAB-300VA 230V 12V BOT-250 Boiler Inspection Transformers In Steel enclosure with 2 x 5A socket outlets. Size 130H x 177W x 200D fFuoTolrflarsLrneaaigsenfhgpotearinmggeer7s6,2 Code Input Volts Output Volts BOT-125 230V 32VAC BOT-250 230V 32VAC BOT-400 230V 32VAC79 T1

REGULATED POWER SUPPLIES 8-PIN Plug-in Amps Code Code Code Specifications 100mA 5VDC 12VDC 24VDC 300mA PSU/0.1/5 PSU/0.1/12 PSU/0.1/24 Supply voltage 110V or 230V (to be specified) PSU/0.3/5 PSU/0.3/12 PSU/0.3/24 Overload protection Short circuit protection DIN rail mount500mA to 2A 100mA Amps Code Code Code Specifications 5VDC 12VDC 24VDC 100mA EPSU/0.1/5 EPSU/0,1/12 EPSU/0.1/24 Supply voltage: 110V or 230VAC (to be specified) 500mA PSU/0.5/5 PSU/0,5/12 PSU/0.5/24 Overload protection 1A PSU/1/5 PSU/1/12 PSU/1/24 Short circuit protection 2A PSU/2/5 PSU/2/12 – Adjustable output:   5V = 1.5V-7VDC 12V = 1.5V-14VDC 24V = 1.5V-26.4VDC Robust DIN Power Supplies Amps Code Input Output Adjustment Size 12V 24V 100-240VAC 24VDC ±10% WxH xD 76 x  93 x 65 Single Phase 2A – DR-4524 DR-4512/24 DR-75-24 2.5A – DR-6024 100-240VAC 24VDC – 76 x  90 x 56DR-10012/24 DR-6012/24 3.2A – DR-75-24 100-240VAC 24VDC ±10% 56 x 125 x 110 4.2A – DR-10024 100-240VAC 24VDC – 98 x  90 x 56 3.5A DR-4512 – 100-240VAC 12VDC – 77 x  90 x 65 5.0A DR-6012 – 100-240VAC 12VDC – 76 x  90 x 56 7.5A DR-10012 – 100-240VAC 12VDC – 98 x  90 x 56 Switch Mode Power Supplies Supply voltage 190 to 260VAC 50/60Hz Code (12VDC) Amps Rated Power Dimensions • Switch Mode Supplies are stabilised ZIM-12/08 0.8A 10W power supplies that are smaller and 1 Mod (17.5mm) lighter compared to traditional power ZIM-12/12 1.2A 15W 2 Mod (35mm) supplies and have a more stable 3 Mod (53mm) output voltage. ZIM-12/25 2.0A 24W PSM60-12 5A 60W 5 Mod (88mm) Features Code (24VDC) Amps Rated Power Dimensions • Available in 12V and 24VDC ZIM-24/04 0.4A 10W 1 Mod (17.5mm) • Max output current: 7.5A (at 12V) ZIM-24/06 0.6A 15W ZIM-24/12 1.0A 24W • No load resistance PSM60-24 2.5A 60W 2 Mod (35mm) • DIN rail Mounting 3 Mod (53mm) • Operating Temperature 5 Mod (88mm) -20° to 85°C Stabilised Power Supplies Features POWER SUPPLIES, TRANSFORMERS & UPS Supply voltage 230VAC 50/60Hz • Voltage regulator with thermal Code Output Voltage Amps Dimensions protection and current limiter. 125mA 3 Mod (53mm) • Power supply indication: LED ZSM-11 3, 5, 9, 14, 18, 24VDC 250mA 3 Mod (53mm) • DIN rail mounting ZSM-12 12VDC • Operating Temperature -20° to 85°C 125mA 3 Mod (53mm) ZSM-24 24VDC Transformers Supply Voltage 230VAC 50/ 60Hz Rated Power: 15VA Code Rated Secondary Rated Secondary Dimensions Voltage Current Features TRM-8 8VAC 1.88A 3 Mod (53mm) • Short circuit and overload protection TRM-12 12VAC 1.25A 3 Mod (53mm) • Inner thermal protection • DIN rail mounting TRM-24 24VAC 0.625A 3 Mod (53mm) • Thermal Insulation Class: B (120DC) TRM-358 3/ 5/ 8VAC 5/ 3/ 1.88A 3 Mod (53mm) BC1 80

REGULATED POWER SUPPLIES Enclosed DIN rail mount Supply voltage: 115/230VAC (10A/20A) 96-264VAC (up to 5A) Amps Code Code Code 5VDC 12VDC 24VDC Output Accuracy: ±2% Load Regulation: ±2% 200mA to 750mA 1.25A to 5A 200mA – – DRA05-24 Voltage Adjustable: 5V: 5-5.5V 400mA – DRA05-12 DRA10-24 750mA DRA05-5 DRA10-12 DRA18-24 12V: 12-14V 1.25A DRA10-5 DRA18-12 DRA30-24 24V: 24-28V 2.5A – DRA30-12 DRA60-24 Output Short Circuit Protection 5A DRA30-5 DRA60-12 DRA120-24 Derating from 50 to 70°C Derate by 30% 10A – DRA120-12 DRA240-24 Power ready connection output 20A – DRA240-12 DRA480-24 Parallel function only available on DRA480-24 Code Description Redundant Application DRP10 10Amp Redundant Module DRP10 DRP20 20Amp Redundant Module with ready relay contacts & LED for input failure alarm Power Supply with DC Backup System Amps Code Code Code 1+1 Redundancy: Using Single Use: Connecting only one PS to 5VDC 12VDC 24VDC 1 more PS as the one DRP20 to reduce the stress of the – DRA480-24ADCB redundant unit. diodes and hence increase the reliability. DRA480 17.5A – DIN Rail Mount DIN rail mount 3/5A 5/10A Amps Code Code Code Code Supply voltage: 100-240VAC 40A/80A 5VDC 12VDC 24VDC 48VDC Short circuit protection, auto recovery overload ­protection 3A DPSU/3/5 DPSU/3/12 DPSU/3/24 – Ripple: 100mVp-p Line regulation: 1% 5A DPSU/5/5 DPSU/5/12 DPSU/5/24 DPSU/5/48 Load regulation: 1% Adjustable output:    10A – DPSU/10/12 DPSU/10/24 DPSU/10/48 5V = 4.5V-5.5V 12V = 10.8-14VDC 20A – DPSU/20/12 DPSU/20/24 DPSU/20/48 24V = 21.6-26.4V 40A – DPSU/40/12 DPSU/40/24 – 80A – DPSU/80/12 – – Chassis mount 10A PSU/10/5 PSU/10/12 PSU/10/24 – 20A – PSU/20/12 PSU/20/24 – 25A – PSU/25/12 – – Three Phase DIN Power Supplies Overload protection auto recovery Short circuit protection auto recovery Over voltage protection latch off Amps Code Input Output Adjustment Size (mm) 24VDC 10A SL10/3 340-500VAC 24VDC 23-27V 238 x 153 x 110 288 x 210 x 143 20A SL20/3 340-500VAC 24VDC 23-27V 288 x 210 x 143 40A SL40/3 340-500VAC 24VDC 23-27V BOX TYPE SWITCH MODE POWER SUPPLIESPOWER SUPPLIES, TRANSFORMERS & UPS Supply Volts 90 - 250VAC Chassis mount Watts Code Amps Code Amps Code Amps Size (mm) Watts Code Amps Size (mm) 12VDC 24VDC 48VDC Wx L xH 5VDC 25W 84 x 58 x 38 40W SNP-25W/12 1.7A SNP-25W/24 1.1A —– 129 x 98 x 38 15W SNP-15W/5 3A 70 x 39 x 31 60W 159 x 98 x 38 100W SNP-40W/12 3.5A SNP-40W/24 1.8A —– 199 x 98 x 38 25W SNP-25W/5 5A 84 x 58 x 38 120W 199 x 98 x 38 150W SNP-60W/12 5A SNP-60W/24 2.5A SNP-60W/48 1.25A 199 x 98 x 38 60W SNP-60W/5 10A 129 x 98 x 38 200W 200 x 110 x 50 250W SNP-100W/12 8.5A SNP-100W/24 4.5A —– 200 x 110 x 50 100W SNP-100W/5 20A 199 x 98 x 38 350W 215 x 115 x 52 480W SNP-120W/12 10A SNP-120W/24 5A SNP-120W/48 2.5A 240 x 125 x 65 • Overload protection • Short circuit protection SNP-150W/12 12.5A SNP-150W/24 6.2A —– • Output accuracy: 2% • Load regulation: 2% SNP-200W/12 16.5A SNP-200W/24 8.3A SNP-200W/48 4.2A SNP-250W/12 20A SNP-250W/24 10A SNP-250W/48 5A SNP-350W/12 30A SNP-350W/24 15A SNP-350W/48 7.5A -- SNP-480W/24 20A --81 BC1

DIN MOUNT SWITCH MODE POWER SUPPLIES Single Phase: 120 - 230VAC Input (90 - 264VAC / 100 - 345VDC) Power 12VDC 24VDC Output @ 45°C V Out Size (mm) 48VDC Continuous A Overload Peak Adjust H x W x D XCSF30 30W - XCSF30C - 1.2A 1.4A ― N/A 82 x 23 x 99 85W - 120W XCSF85B XCSF85C - 3.5A 6A / 30sec 10A / 50msec 23-27.5V 115 x 39 x 128 240W - - -- 6 9A / 30sec 10A / 50msec 12-15V 115 x 39 x 128 - - - XCF120DP 2.5A 8A / 30sec 7.5A / 50msec 45-55V 115 x 39 x 128 XCSF120C - 5A 8A / 30sec 15A / 50msec 23-27.5V 115 x 39 x 128 - XCSF240DP 5A 7.5A / 30sec 25A / 400msec 45-55V 140 x 63.5 x 135 XCSF240C - 10A 15A / 30sec 25A / 400msec 23-27.5V 140 x 63.5 x 135 1 or 2 Phase: 230 - 400 - 500VAC Input (185 - 550VAC / 270 - 725VDC)XCSF240 XCSF85 - XCSW121C - 5A 7.5A / 5sec 15A / 0.5sec 23-27.5V 115 x 39 x 130 XCSW241 XCSF120 120W XCSW121B - 8A - 7A 10-9A / 5sec 15A / 0.5sec 12-15V 115 x 39 x 130 - XCSW121 45-55V 115 x 55 x 130 1,2 or 3 Phase: 230 - 400 - 550VAC Input (185 - 550VAC / 270 - 770VDC) 24-27.5V 115 x 55 x 130 12-15V 115 x 55 x 130 - - XCSW241DP 5A 6A / 5sec 20A / 0.5sec 15A / 5sec 20A / 0.5sec 240W - XCSW241C - 10A 20A / 5sec 20A / 0.5sec XCSW241B - - 16A • Short circuit, Overload, Over temperature, Input/Output over voltage protected. • Output voltage decay alarm set at ˗10% Vout nominal (Contact Output) • High outrush current to guarantee downstream overcurrent protection and for heavy load startup. • Load regulation < 1% • Compact dimensions and high efficiency Back-up Battery Charger/Controller (With changeover from mains to batt.) Code Input / Load Volts Load Current XCS-UPS1 26 - 28VDC 15A XCS-UPS2 10 - 15VDC 15A • Built-in change over of load from power supply to battery and alarm output • Selectable battery charging current: 2/4A • Low voltage protection for battery Battery Holder Module 12V/24V Code Size (mm) H x W x D XCSBP30Y 113 x 55 x 130 • Can accomadate 2 x 12VDC 2.4Ah batteries • Batteries to be ordered seperately Redundant Parallel Connection Module Out Code Intput Output Size (mm) In POWER SUPPLIES, TRANSFORMERS & UPS XCSBD Volts (DC) Amps Volts (DC) Amps HxWxD PSU1 12 - 24 - 48 15A 12 - 24 - 48 15A 130 x 43 x 85 In PSU2 • This module can connect in redundant parallel two power supplies not fitted with built- in \"O-ring\" diodes. (Output decoupling diodes). • Status LED's and relays for fault indication and remote failure alarm DC-DC VOLTAGE CONVERTERS DC-DC Voltage Converters Power Code InpVuotltageODuCtput Vin Iin Vout Adj. Continuous 120W XCSA120BC Range Max Limits Amps Out 5A 12V 24V 10.5 - 18V 12A 22.5 - 27.5V 7A 5A XCSA120 120W XCSA120CB 24V 12V 18 - 36V 5.1A 12.0 - 15.0V 6,5A 120W XCSA120CC 24V 24V 18 - 36V 5.8 22.5 - 27.5V 10A 120W XCSA120DC 48V 24V 36 - 72V 2.8A 22.5 - 27.5V 82 240W XCSA240FC 110V 24V 110 - 130V 2.4A 22.5 - 27.5V • Short circuit, Overload, Over temperature protected. • Wide DC input range • Internal protection fuse XCSA240FC • Compact design:- H115mm x W55mm x D130mm (XCSA240:- H140mm x W73mm x D137mm) BC1

REGULATED POWER SUPPLIES WSHTOILLCEAKSST Robust DIN Power Supplies - Single Phase Code Amps Input Output Size (mm) SNP-129 5A 90 - 264VAC 24VDC (23.5 - 29VDC) 65 x 125 x 112 SNP-249 10A 90 - 264VAC 24VDC (23.5 - 29VDC) 122 x 125 x 112 SNP-489* 20A 90 - 264VAC 24VDC (23.5 - 29VDC) 123 x 125 x 112 * Can be parallel connected DC TO DC CONVERTERS This series is designed to convert 20 - 28VDC Step-Down DC to DC Converter - 24VDC/12VDC voltage to 13.8VDC. Suitable for use with radios and other 12VDC equipment in 24VDC vehicles Code Output Surge Fuse* 7A DF1714C 7A 10A 15A 20A DF1715C 15A 20A 25A 40A DF1716C 20A 25A DF1717C 25A 30A MSD500-12 40A 45A • Input voltage: DC24V±4V. • Output voltage: 13.65~13.8VDC. *To be fitted when installing. • Ripple < 5mV. v • Load regulation: 3%. • Input protection: over-voltage/current-limit/ reverse polarity. Step-Up & Step Down DC to DC Converter D2412-5 Code Output Current Surge Input Volts Output Volts Step-Up *D1224-05 5A 8A 10 - 25VDC 26VDC MSD100-12/24 12V/8A 24V/4A 9A 10.5 - 16VDC 12 - 24VDC 5A Adjustable Adjustable Step-Down D4812-2 2A 3A 24 - 63VDC 13.8VDC MSD18-12 1.5A 2A 12 - 28VDC 7.5/9/12VDC DC/DC Battery Charger MSD100-12/24 MSD18-12 D2412-5 5A 5A 11 - 35VDC 13.8VDC HEAVY DUTY JUMP STARTERS Jump Starter & Compressor Code Volts Battery Start Amps Peak On/Off Amps Switch SP-JS005 12V 17Ah 400A 900A Yes Built-in 300psi compressor, 2 x 5W lights, 3 x cigarette lighter sockets (Max 15A)POWER SUPPLIES, TRANSFORMERS & UPS SP-JS005 Heavy Duty Jump Starters TD04 Code Volts Battery Start Amps Peak On/Off 83 Amps Switch PS1000 PS1000 12V 18Ah 500A Yes TD04 12 / 24V 2 x 18Ah 1100A / 12V 1100A Yes 500A / 24V 2200A / 12V GM071 12 / 24V 2 x 22Ah 1500A / 12V 1100A / 24V Yes 750A /24V 3000A / 12V GM071 1500A / 24V Battery Jumper Cables Booster Cables Code/Pair Amps Length Code SB212407 OY-405 100A 2.5m 300A 2.5m Booster Cable OY-403 200A 2.5m in zip-up bag OY-402 300A 2.5m OY-401 400A 2.5m Code SB212407X 300A 2.5m Booster Cable c/w gloves and 3.5m tow rope in zip-up bag BC1

VARIABLE POWER SUPPLIES Single Output Power Supplies Code Voltage Current Parallel Indication DigitalDF1730SL-5A PROVA-8000 DF1730SL-5A 0-30VDC 0 - 5A – DigitalDF1750SL-5A DF1730SL-10A 0-30VDC 0 - 10A – Digital DF1731SL3A DF1730SL-20A 0-30VDC 0 - 20A – Digital Dual PSU DF1750SL-5A 0-50VDC 0 - 5A – Digital PROVA-8000 0-40VDC 0 - 5A – Indication Dual Output Power Supplies (230VAC) Digital Digital Code Voltage Current Parallel • Current Limit DF1731SL3A 2 x 0-30VDC 2 x 0-3A 6A DF1731SL-10A (Dual-output) 2 x 0-30VDC 2 x 0-10A 20A (0-60VDC) Series connection • Ripple < 1mV RMS (0-30VDC) Parallel connection • Load regulation 1% MAINS POWER SUPPLIES Unregulated, Plugs into 15A Socket Outlet Code Volts Amps Output Connection MD Range MD1606-* 230VAC to 6VDC 1,6A *Barrel Plug or Terminal MD1009-* 230VAC to 9VDC 1,0A *Barrel Plug or Terminal 25VAP FD Range MD1012-* 230VAC to 12VDC 1,0A *Barrel Plug or Terminal MD0812-* 230VAC to 12VDC 0,8A *Barrel Plug or Terminal 15VAP 25VAP-24-* 230VAC to 24VAC 1.0A *Barrel Plug or TerminalMulti Plug 12VAP-24-* 230VAC to 24VAC 0.5A *Barrel Plug or Terminal 15VAP-12-* 230VAC to 12VAC 1.2A *Barrel Plug or Terminal 15VAPL-16-* 230VAC to 16VAC (C/W LED) 0,9A *Barrel Plug or Terminal 15VAP-24-* 230VAC to 24VAC 0.62A *Barrel Plug or Terminal FD-5002T 230VAC to 1.5/3/4.5/6/7.5/9/12VDC 0.5A Multi Plug FD-1002T 230VAC to 1.5/3/4.5/6/7.5/9/12VDC 1.0A Multi Plug EU Range *Barrel plug inside Ø size to be specified: 1.4, 2.1, 2.5 or T for Terminal. Standard Plug wiring + Internal – External Other voltages made up to your specification. Code Voltage Amps EU-5002T 230VAC to 1.5/3/4.5/6/7.5/9/12VDC 0.5A EU-1002T 230VAC to 1.5/3/4.5/6/7.5/9/12VDC 1.0AEXRTAENNDGEDE Regulated, Plug-In Power Supply - 100 - 240VAC (Switch Mode Type) Code 2 Pin Euro Code 3 Pin SA Amps Output Voltage 5VDC 2 Pin Euro S0510 S0510Z 1A 5VDC POWER SUPPLIES, TRANSFORMERS & UPS S0520 S0520Z 2A 5VDC 3 Pin SA S0530 S0530Z 3A 9VDC S0910 S0910Z 1A 9VDC S0915 S0915Z 1,5A 9VDC S0920 S0920Z 2A 12VDC S1205 S1205Z 0.5A 12VDC S1210 S1210Z 1A 12VDC S1220 S1220Z 2A 24VDC - S2405Z 0.5A 24VDC - S2410Z 1A Barrel Plug: inside Ø size: 2.1mm Regulated Bench Type Power Supplies (Switch Mode) - Input volts 100-240VAC Code Amps Watts Size (mm) Code Amps Watts Size (mm) 12VDC LxWxD 24VDC LxWxD 1A 12W 1A 24W S1210D 2A 24W 86 x 48 x 30 S2410D 2A 48W 98 x 47 x 32 S1220D 3A 36W 98 x 47 x 31 S2420D 3A 72W 110 x 56 x 33 S1230D 4A 48W 110 x 56 x 33 S2430D 4A 96W 117 x 53 x 30 S1240D 5A 60W 110 x 56 x 33 S2440D 5A 120W 150 x 65 x 38 S1250D 112 x 54 x 32 S2450D 150 x 65 x 38 S1230D Input voltage: 90 - 264VAC Load Regulation: ±5% Short Circuit Protection. Overload Protection. Line Regulation: ±1% BC1 84

POWER SUPPLIES & BATTERY CHARGERS Switch Mode Universal Regulated Power Supplies Charger Car Power Adaptor 2 Pin Euro Code PSF-1200ME PSF-2500ME PSA-1500M V-6833+AA/160 Output Volts 3/4.5/6/9/12VDC Output 3/4.5/6/7.5/9VDC Features Input Volts 1.5A Accessories 1 .2A 2.5A 11 - 14VDC • F ully charge 2 or 4 pcs Ni-MH 1800mAh AA or 100 - 240VAC 750mAh AAA in 15 hours 6 x Detachable Plugs Supplied with Power Supply • Safety timer controlled • D irect plug-in type • Blister pack USB Adaptors NAEUDWSABPTOR PST-2005U PSA-2005U A13-180 ST02 SU22 SU11 Code 100 - 240VAC 12 - 14VDC 12 - 14VDC 100 - 240VAC 100 - 240VAC 100 - 240VAC Input 2 x 5V, 2 x 5V, 2 x 5V, 2 x 5V 2 x 5V 5 x 5V USB Output 2100mA (Total) 2100mA (Total) 2100mA (Total) 2.1A (Total) 2.1A (Total) 6A (Total) Universal Power Adaptors AC/DC Adaptor AC/DC Adaptor for Digital Camera for Digital Devices Code PST-2500ME PST-1200ME 100 - 240VAC Input 3-8.4VDC, 2500mA 100 - 240VAC Output 3-12VDC, 1200mA USB Output – – Universal Ni-Cd & Ni-MH ChargersPOWER SUPPLIES, TRANSFORMERS & UPS NEWchWaArolgkreladrl'isfnoferirBsntaotrtmeraiels Code Charger PB-500 V-1268N CHB-7N9 V-2299 Charger + 4 Batteries - - CHB-7N9-4F - Battery Type 4 x AA / AAA or 2 x C 4 x AA / AAA 4 x AA/AAA or 2 x 9V 4xAA /AAA/C&D + 9Vx2 Charge Time 4.5 Hours 2 Hours Ni-Cd 5hrs, Ni-MH 7hrs Features 4 Hours • F or AA or AAA sizes only • Intelligent MCU controlled, • Powered by the supplied AC • To charge 4xAA/AAA or 2 x C Alkaline or NiMH • Auto chare/discharge rate selection special fuzzy control quick adaptor for home/office use or by • Enables the activation • Built-in discharge function prevents charging mode. the supplied 12VDC car adaptor. of remaining chemical in alkaline batteries “memory effect” longer battery life. • Special design, detect & rescue • Battery life protected by negative • L ED indication of • LED lamps indicate charge & discharge over-discharged battery delta V detection and timer charging, good / bad battery • Charge rate selector switch for automatically. protection. different batteries: • M ore than 85 - 90% high • Automatic charging current • M icro-processor chip controlled charging with - A A 500mAh: ± 3hrs charging efficiency. selection for different sizes of auto cut-off and safety timer. - AA 600mAh/AAA batteries. - AA180mAh: ± 3¾hrs • LED display for: rapid charge, - AA 700mAh: ± 4¼hrs trickle charge and bad battery - AAA 220mAh: ± 4¼hrs detection.85 BC1

RECHARGEABLE BATTERIES Ni-CD Ni-MH (Nickel Metal Hydride) no memory effect Nickel Cadimum Industrial Type DType AA (1.2V) AAA (1.2V) (9V) AACode N1800AA (1800mAh) N750AAA (750mAh) N2009V (200mAh) D (1.2V) N2300AA (2300mAh) N800AAA (800mAh) 1 piece ND6000D 6000mAh N2800AA (2800mAh) N1000AAA (1000mAh) AA (1.2V) 4 pieces per blister pack ND900AA 900mAh ALKALINE/ LITHIUM BATTERIES 1 piece PremiumType AAA AA C D 9V1 Pack Code2 Pack Code – – – – 982154 Pack Code 98207 98208 98213 98214 98225 98209 98210 98223 98224 – Long Lasting, Heavy DutyType AAA AA C D 9V1 Pack Code – – – – 98101 POWER SUPPLIES, TRANSFORMERS & UPS2 Pack Code – – 98105 98106 981144 Pack Code 98111 98112 98117 981188 Pack Code 98121 98122 – – – –Maximum Power - automotive, garage door remotes, calculators, medical devices Zinc Air - Hearing Aid Batteries 1.4VType AC513 AC514 AC515 AC531 Orange Tab Yellow Tab Brown TabDescription Lithium 3V Lithium 3V Lithium 3V Alkaline 12V alarm 98656 98652 98654Quantity 2 per pack 2 per pack 2 per packBattery Type CR2016 CR2025 CR2032 2 per pack Ø7.9 x 5.4mm Ø5.8 x 3.6mm Ø7.9 x 3.6mm A23/12V 8 per pack 8 per pack 8 per pack ZA13/DA13 ZA10/DA10 ZA312/DA312 BC1 86

BATTERY CHARGERS Industrial automatic type (Standard supply voltage 230VAC) Size Open Type Open Type Code Enclosed Type Code All our battery Dimensions 12VDC 24VDC chargers are for use 12VDC 24VDC – ETE24/3 with lead acid 300mA 8 Pin plug in TE12/0.3 – – ETE24/5 batteries ETE24/10 8-Pin Plug-in type 3A 195 x 95 x 47 – TE24/3N – ETE24/15 ETE24/20 TE12/5N 5A 195 x 95 x 47 TE12/5N AP24/5 ETE12/5 ETE24/25 TE24/3N 10A 175 x 110 x 45 AP12/10 PM-1024 ETE12/10 15A 210 x 110 x 45 AP12/15 PM-1424 (14A) ETE12/15 20A 225 x 110 x 50 AP12/20 PM-2024F ETE12/20 25A 370 x 180 x 80 PM2512 PM-2524 ETE12/25 Optional factory extras for enclosed type Enclosed Type Mains Failure Relay: BC100 Enclosed Version Features AP type HE202 IP65 wall mounting panel with on-off switch, ammeter, voltmeter, mains pilot light, test switch and 2 glands. AP type Multi-Stage Battery Chargers 2-Stage Constant Voltage charging: Initial charge current is held at maximum output. As battery gains charge and voltage rises towards the end-charge value the current ramps downward to a maintenance level at full charge. 3-Stage Speed charging: (1) high-speed bulk charge: initial charge current held at max output until voltage reaches setpoint above end- charge value. Battery attains 80% of full charge at rapid pace. (2) relaxed charge to 100% capacity: charge current is slowly ramped down to end-charge level. (3) maintenance charge: voltage drops to end-charge value, trickle current compensates for self discharge of battery. Amps Stage 12V Code Supply Volts Size (mm) 24V Code Supply Volts Size (mm) 150 x 110 x 40 3A 2 – – – AP24/3 110/230VAC 175 x 110 x 45 5A 2 AP12/5 110/230VAC 150 x 110 x 40 AP24/5 110/230VAC 200 x 180 x 77 10A 2 AP12/10 90-265VAC 175 x 110 x 45 PM-1024 110/230VAC 280 x 209 x 85 210 x 110 x 45 280 x 209 x 85 15A 3 AP12/15 90-265VAC PM-1424 (14A) 230VAC 400 x 209 x 85 20A 3 AP12/20 90-265VAC 225 x 110 x 50 400 x 209 x 85 PM-1424 25A 3 PM-2512 110/230VAC 280 x 209 x 85 PM-2024F 90-260VAC 415 x 180 x 160 PM-5024 30A 3 PM-3512 110/230VAC 400 x 209 x 85 50A 3 PM-5012 110/230VAC 400 x 209 x 85 PM-2524 110/230VAC Size (mm) 180 x 88 x 47 PM-3024 110/230VAC 280 x 209 x 85 283 x 186 x 163 PM-5024 110/230VAC 36V and 48V Battery Chargers Amps Stage 36V Code Supply Volts Size (mm) 48V Code Supply Volts 4A 3 PM-0436F 90-260VAC 180 x 88 x 47 PM-0348F (3A) 90-260VAC 8A 3 –– – 20A 3 PM-2036F 90-260VAC 243 x 186 x 163 PM-0848 110/230VACPOWER SUPPLIES, TRANSFORMERS & UPS PM-2048F 90-260VAC Battery Indicators Battery Indicator Analogue Battery Hour Counters & Hour Counter Indicator Indicator ID-12V / ID24-36V IS24-80V IST24-80V V332-12VDC HC12-48V CO12-80V Indicator ID-48V V332-24VDC – – & Relay – ISR24-80V ISTR24-80V – 99999.9 Hour Counter 87 • Automatic Battery Voltage selected Panel cutout: • Automatic zero-ing after charge is finished 52mm Ø • Flashing LED’s indication when battery needs charging 12VDC: 8-16VDC • Relay output when battery reaches low level 1.73V/cell 24VDC: 16-32VDC • Dimensions: 53 x 32mm (rectangle type) Ø 57mm (round type) BC1

BATTERY CHARGERSDF1773 & TC-2420 ENERBOX8 Domestic Enclosed Type (Standard supply voltage 230VAC) NFOUSE Code Description Amps Battery Size (mm) Volts WxHxD SMARTCHARGE3000 MOTOBOX DF1773 Man Charger 10A TC-2420 Man/Auto Charger 20A 12 or 24V 280 x 200 x 122 MOTOBOX Inverter Charger 2.5A 12 or 24V 220 x 200 x 150 SMARTCHARGE3000 Inverter Charger 7A 12V 175 x 260 x 135 ENERBOX6 Econo battery Charger 4A 12V 130 x 150 x 60 ENERBOX8 Econo battery Charger 7.5A 12V 240 x 140 x 130 ENERBOX15 Econo battery Charger 16A 6 or 12V 240 x 140 x 130 12 or 24V 240 x 140 x 130 Heavy Duty Manual Battery Chargers - Dual Voltage Code Battery Rated Charge Current Battery Volts Amps Size Slow Fast Boost 120/140Ah THOR 320 12V 17A 7.5A 25A 180A 140/160Ah THOR 450 24V 14A 7.5A 20A 160A THOR 650 12V 33A 8.5A 57A 290A 160/180Ah 24V 37A 11A 63A 220A 12V 55A 15A 80A 400A 24V 56A 15A 90A 380A Heavy Duty Microprocessor Controlled Battery Charger - Dual VoltageTHOR 450 THOR 350 12V 23A 5A 40A 180A 120/140Ah 24V 23A 5A 40A 160A • Ammeter THOR 350 • Jump Start not to exceed 5 sec • Overheat protection • Fan cooling on THOR 350 • Supply Voltage 230VAC • Reverse Polarity protection • Protection fuses • Slow/Fast/Boost charging Semi Professional Battery Chargers Code Battery Rated Charge Current Battery Volts Amps Size AGRI-20 Slow Fast Boost AGRI-30 12 / 24V 14 / 13A 100/130Ah AGRI-210 12 / 24V 22 / 18A 14 / 12A 20 / 18A – 120/140Ah AUTOMATIC-30 12 / 24V 22 / 18A 140/160Ah 12 / 24V 20 / 9A 16 / 14A 32 / 29A – 140/160AhAGRI AUTOMATIC-30 17 / 12A 24 / 17A 140 / 120A 11 / 7A 30 / 26A – Standby Generator Battery Charger - 100-240VAC - DIN Rail Mount Code Description Features GENCHARGE 312 3A@12VDC Output GENCHARGE 324 3A@24VDC Output • Boost output for quick charging GENCHARGE 512 5A@12VDC Output • Easy replaceable fuse GENCHARGE 524 5A@24VDC Output • Flame resistant plastic • Short circuit, over current & reverse connection protected Standby Generator Battery Charger - 100-240VAC - DIN Rail Mount 9150 9702 Code Battery Size Output Mounting Features POWER SUPPLIES, TRANSFORMERS & UPS 9130 9701 9225 DSE-9150 65Ah 12V / 3A Horizontal DIN rail or panel Multi stage charging DSE-9130 105Ah 12V / 5A Horizontal DIN rail or panel with boost. Short circuitENC Type DSE-9225 160Ah 24V / 5A Horizontal DIN rail or panel /reverse polarity DSE-9702 105Ah 12V / 5A Vertical DIN rail or panel protected. Switched EBC Type DSE-9701 160Ah 24V / 5A Vertical DIN rail or panel mode design. Units can be paralled Multi-Stage Battery Chargers Code ENC1210 ENC1220 ENC2410 EBC2405 EBC2405 EBC1210 EBC1220 Input Voltage 90 - 165VAC / 165 - 250VAC 190 - 265VAC Output Volt/Amp 12 / 10 12 / 20 24 /10 24 / 5 24 / 10 12 / 10 12 / 20 Charge Stages 777 7 Remote Control 3 3 3 √√√ √ LED Display ― LED Indication ― ― ― Battery Volts / Current / Charge Stage / Over Temp ― Charge Stage ― AGM / GEL / WET Battery Type • ENC: 3 Stage Charging: Constant Current / Constant Voltage / Float Charge • EBC: 7 Stage Charging: De-sulphation / Soft-Start / Constant Current / Constant Voltage / Battery Test / Re-conditioning / Float Charge • Protected against Over temperature, Over load, Short Circuit and Reverse Polarity • Switch Mode Technology Cooling Fan BC1 88

BATTERY CHARGERS Automatic Intelligent Battery Chargers Code Input Volts Output Charging Mode Display Volts Current HF0206DV 120/230VAC 12/24VDC 2/4/6A Auto Intelligent LED HF0210DV 120/230VAC 12/24VDC 2/6/10A Auto Intelligent LED HF0220 120/230VAC 12VDC 2/10/20A Auto Intelligent LED HF0206DV HF0220 Micro processor controlled with intelligent multi stage charging mode. Fast and slow charging option. Short circuit, reverse polarity, overload, overheating and spark protected. Battery Charger with Jump Start Intelligent Battery Chargers Code TS2200A Code HFG4DVD HFG7DVD-24 Input Volts 230VAC Input Volts 120/230VAC 120/230VAC Output Volts 6/12/24VDC Output Volts 6/12VDC 12/24VDC Charging Current 5/20/40A Charging Current 2/4A 7/3.5A Mode Manual Mode Auto Intelligent Auto Intelligent Display Meter Display LED Digital Suitable for lead-acid batteries. Micro processor controlled with intelligent multi-stage Constant high charge current. Fully charging. Short circuit, reverse polarity, overload, insulated clamps. overheating and spark protected. Three-Step Battery Chargers 40W Plug-in Type - 100-240VAC Features Code Output Charging Voltage The Charger outputs a constant charge current until the charge voltage has climbed to the absorption voltage. Voltage current Absorption Trickle Starting from there the charge voltage is held constant for about 120min, allowing the charge current to decay 111-06152-130 12V 1.5A 14.7V 13.8V to a small trickle current. At this point the charge 111-06272-131 6/12V 2.7A 7.3/14.7V 6.9/13.8V voltage falls to the Trickle level, charging the battery with 111-12152-130 24V 1.5A 29.4V 27.6V a small trickle current to maintain the charge. Desktop Lead-Acid Battery Charger - 100-240VAC • Suitable for use with wheel chairs or Golf carts • 3-stage charging (As described above) 161-06802-130 12V 8A 14.7V 13.8V • LED indication of the State of charge, possible 161-12502-130 24V 5A 29.4V 27.6V connection problems, Battery deep discharge DIN Mount Power Supply and Battery Charger - 100-240VAC Code Power Supply O/P Battery Charger O/P Dimension 14.5 Volt @ 150mA 53W x 99H x 63D PSM12-12B 12 Volt @ 1Amp 14.5 Volt @ 150mA 53W x 99H x 63D PSM24-12B 12 Volt @ 2Amp BATTERY CHARGERSPOWER SUPPLIES, TRANSFORMERS & UPS Universal Input Voltage IP21 • 2 Isolated outputs to charge 2 battery banks, the second output is limited to 4A • SC-I series can be synchronised in parallel charging mode by interconnecting via RJ45 • SC-I series fitted with battery temperature / voltage charging level compensation • Battery voltage sensing to compensate for cable resistance • Can be used as a power supply • Auto storage mode enabled when battery not subjected to discharge Code SC-TG-24/30 SC-TG-24/50 SC-I-24/80 SC-I-24/100 Supply Voltage Charging Voltage 90-265VAC / 90-400VDC 90-265VAC / 90-400VDC 90-265VAC / 90-400VDC 90-265VAC / 90-400VDC Charging Current Battery Capacity 24VDC 24VDC 24VDC 24VDC Dimensions (mm) 30A 50A 80A 100A 150-300Ah 250-500Ah - - 365 x 250 x 147 366 x 250 x 147 402 x 250 x 140 403 x 250 x 140 High Efficiency Adaptive Charging IP22 • Micro-processor controlled, 6 stage adaptive charging algorithms: Test, Bulk, Absorption, Recondition, Float, Storage • Charging is automatically adapted to battery usage conditions • Also charges LI-ION batteries • LED status indication • Protected against overheating • Night / Low charge modes (charging current reduced to 25% of nominal) Code BPC-IP22-12/20 BPC-IP22-12/30 BPC-IP22-24/12 BPC-IP22-24/15 Supply Voltage 180-265VAC 180-265VAC 180-265VAC 180-265VAC Charging Voltage 12VDC 12VDC 24VDC 24VDC Charging Current 20A 30A 12A 15A Night / Low 5A 8A 3A 4A Dimensions (mm) 235 x 1208 x 65 235 x 1208 x 65 235 x 1208 x 65 235 x 1208 x 6589 BC1

PRECISION WATERPROOF BATTERY CHARGERS IP65Ultra high efficiency battery chargers. Multiple charging modes for different applications and battery types. Multistage charging. Battery life extending technology.Code BPC-12/4 BPC-12/7 BPC-12/10 BPC-12/15 BPC-24/5 BPC-24/8Supply voltage 200 - 265VAC 180 - 265VAC 180 - 265VAC 180 - 265VAC 180 - 265VAC 180 - 265VACCharging current 4A/0.8A 7A 10A 15A 5A 8AMin. Battery - 24Ah 30Ah 45Ah 16Ah 24AhDimensions 42 x 61 x 185mm 47 x 95 x 190mm 60 x 105 x 190mm 60 x 105 x 190mm 47 x 95 x 190mm 60 x 105 x 190mm• DC Connector: Clamps, Ring Lugs, Cigarette Plug • DC connector: Clamps, Ring Lugs • Automatic power supply function• Storage Mode • 3 Charging modes • Water dust & chemical resistant • Automatic compensation for high or low temperature• Overheating & reversed polarity protection • Seven step smart charge algorithm • Low power mode for smaller batteries• LED status & mode indication • Recovery of fully discharged batteries • Li-ion battery mode PRECISION BATTERY MONITORINGThe essential function of a battery monitor is to calculate ampere-hours consumed and the state of the charge of a battery. Ampere-hours consumed is calculated byintegrating the current flowing in or out of the battery. These Monitors are based on a powerful micro-processors programmed with algorithms for precision monitoring.Code BMV700 For 2 Batteries Wall Box • Easy to install,Input voltage 6.5 - 95VDC or Temp. • 500A quick connect PCB Current shuntCurrent drawn or Midpoint VWB-BMV • Programmable visual / audio alarmsBattery capacity <4mA Monitoring Wall Mount • Battery Voltage, Current, Power, Ampere hours consumed,Comm port 20-9999AH EnclosurePotential free contacts BMV702 State of charge.Dimensions Yes 6.5 - 95VDC • Remaining time at present rate of discharge 60V/1A/(N/O) • Wide input voltage range 9.5 - 95volts 69 x 69mm <4mA • High current measurement resolution 10mA (0.01A) 20-9999AH • Low current consumption 2.9Ah per month (4mA @12V AN • 10m RJ12 cable and 2m fused battery cable included. Yes • Square front bezel to provide a square/round appearance. 60V/1A/(N/O) • Programmable relay to turn off non-critical loads 69 x 69mm INTELLIGENT BATTERY SWITCHING IP22 Micro-processor logic and fixed time delays monitors the trend of the battery condition and ignore short high ampage load conditions and low voltage levels due to discharged battery. Time delays depend on the voltage deviation fromCBC-12/24-120A the trend. Over temperature protection will disconnect the units and reconnect when cooled down.CBC-12/24-230A LED Status (12/24-230) • LED On = Engaged • 0.25 sec Blink = Over Temp • 2 sec Blink = Disconnecting • 10 sec Flash = Disengaged • 2 sec Flash = Connecting Code CBC-12/24-120A CBC-12/24-230A POWER SUPPLIES, TRANSFORMERS & UPS LED Status Yes Continuous Current No 230A Crank Rating (5sec) 120A 500A Connect Volts 180A Disconnect Volts 13 - 13.8 / 26 - 27.6VDC 13 - 13.8 / 26 - 27.6VDC Dimensions (mm) 11 - 12.8 / 22 - 25.7VDC 11 - 12.8 / 22 - 25.7VDC 46 x 46 x 80 65 x 100 x 50 BATTERY BALANCER IP22•The Battery balancer is designed to overcome the problem of different levels of charge due to internal leakage current in battery banks when connecting batteries in series/parallel combinations thereby extending the life span of batteries Code BB-12/24•The battery balancer equalizes the state of charge of two series connected batteries or of several Input Voltage Range Up to 18/battery, Max 36V Turn on Level parallel strings of series connected batteries 27.3V ± 1%• If needed, several balancers may be connected in parallel Turn off Level 26.6V ± 1% Alarm trigger level 200mV Alarm reset level 140mV Alarm relay 60V / 1A Reset method Ext N/O Push Button Overtemp Protection Yes Current draw when off 0.7mA Midpoint deviation 50mV Dimensions (mm) 100 x 113 x 47 BC1 90

BATTERIES ACDC Batteries use special alloyed calcium- Life span 3 to 5 years lead which leads to extremely low levels of in standby service \"Electrolyte decrease\". Therefore there is no need to top up with distilled water if the FuosrSeBydsaPttientaemgSreisoe1slsa0er4e charging system remains error free. Sealed Lead Acid Deep Cycle Calcium Lead Acid • Complete protection against reduction of sulfuric acid • Consistent starting performance Code Type Nominal Voltage Nominal Capacity Terminal type *Dimensions Sealed Lead Acid Lead Acid * Battery sizes may be changed by manufacturer Lead Acid SY612 Lead Acid 6V 1.2Ah Lug 98 x 25 x 56mm SY632 Lead Acid 6V 3.2Ah Lug 125 x 33 x 72mm SY640 Lead Acid SY640-S Lead Acid 6V 4.0Ah Lug 70 x 47 x 107mm SY1245 Lead Acid SY1270 Lead Acid 6V 4.0Ah Lug 65 x 33 x 75mm SY12012 SY12024 Calcium Lead 12V 4.5Ah Lug 90 x 70 x 107mm Deep Cycle Calcium Lead SY12035 Calcium Lead 12V 7.0Ah Lug 150 x 65 x 102mm SY12045 Calcium Lead SY12065 Calcium Lead 12V 12Ah Lug 151 x 98 x 102mm SY12080 Calcium Lead SY120102 Calcium Lead 12V 24Ah Lug 165 x 126 x 173mm SY120110 SY120200 * Battery sizes may be changed by manufacturer 12V 35Ah SAE Post 230 x 200 x 135mm 12V 45Ah SAE Post 230 x 240 x 135mm 12V 65Ah SAE Post 230 x 265 x 190mm 12V 80Ah SAE Post 226 x 352 x 175mm 12V 102Ah Nut 240 x 335 x 175mm 12V 110Ah Nut 155 x 310 x 190mm 12V 200Ah SAE Post 245 x 520 x 280mm Mounting Brackets Code Description BATTERY BRACKET Mounting Bracket Galv for 7.0A/H Battery - Flat Battery Bracket Battery Bracket 1 BATTERY BRACKET 1 Mounting Bracket Galv for 7.0A/H Battery - Upright BATTERY TERMINALS Code JHC828-2 JHC462-2 JHC006B-2 JHC150-1 (1Pc) JHC002-2 (2Pc) Wing Nut Wing Nut Universal Zinc Marine Brass Marine Brass Terminal P+N Standard Universal Terminals P+N Nickel Plated Lead Terminal 2Pcs Blister Packed 2Pcs Blister Packed 2 Pcs Blister Packed 1 Pc or 2 Pcs Blister PackedPOWER SUPPLIES, TRANSFORMERS & UPS BATTERY TESTER Code PITE3915 Description • Portable battery tester for batteries • Suitable for cell voltages: Technical Specifications 1.2V, 2V, 6V and 12V • Suitable for 5Ah - 6000Ah batteries Resistance range 0.00mΩ ~ 100mΩ • Tests cell resistance and voltage to Test resolution/ accuracy: Resistance 0.1mΩ/ ±1.0% of rdg help eliminate weak batteries and Voltage 1mV/ ±0.2% of rdg ensure optimal performance of the Battery Li-ion system. 3000 cell test results stored Battery Life More than 8 hours in memory Testing Capacity 1-254 cells per string Voltage range 0-220V Features • USB connection for software Display 320 x 240 Pixel TFT updating and data transfer to PC Size 210 x 110 x 60mm • Simultaneously test voltage, resistance and battery capacity • Powerful PC management software for data storage and analysis • Auto-calibration function to enhance testing accuracy • Audible alarm and over voltage protection • Easy navigation via the colour touch screen and keyboard • Fast testing of battery or string, results are automatically saved91 BC1

MOBILE POWER BACKUP SYSTEMSMobile UPS - 230VAC single phase, to be used for home or office during power cuts. All in one Inverter / Charger / Auto change over / Trolley.Input voltage Solar System12VDC/230VACEarth leakage, PolarityReverse, Over Voltage,Low Voltage, Overheat,Short Circuit Protection 600-1000W 1500-3000WCode - Modified EPS-150B EPS-300B EPS-600B EPS-1000B EPS-1500B EPS-2000B PP-3000 EPS-2000D -Code - Pure Sine CPS-150B CPS-300B CPS-600B CPS-1000B - CPS-2000B -Constant Watts 150W 300W 600W 1000W 1500W 2000W 3000W 2000WPeak Watts 300W 600W 1200W 2000W 3000W 4000W 6000W 4000WVoltage 12VDC 12VDC 12VDC 12VDC 12VDC 12VDC 12VDC 13.5 - 20VDCCharging Current 5A 5A 10A 10A 15A 15A 15A 20ASpace for Battery 1 x 65Ah 1 x 65Ah 1 x 102Ah 1 x 102Ah 1 x 102Ah 1 x 102Ah 1 x 102Ah 1 x 102AhBack-up time full load 4hrs 2hrs 2hrs 1.2hrs 0.8hrs 0.6hrs 0.4hrs 0.6hrsBack-up time+102Ah - - 4hrs 2.4hrs 1.6hrs 1.2hrs 0.8hrs 1.2hrsBack-up time+4x102Ah - - 10hrs 6hrs 4hrs 3hrs 2hrs 3hrs (4 batteries) SpecificationsAccessories (1 battery)Battery Boxes EPS-BB1 EPS-BB4 • Robust industrial wheelsBattery Code SY120102 SY120102 • EPS-2000D 180W PV Panel, 20A Charge ControllerBox Size 382 x 218 x 292 430 x 430 x 900 • LED Display of battery and output statusSupplied without batteries. EPS unit can accommodate 1x102Ah battery. Batteries to be ordered separately - SY120102For extra back up time batteries and battery box to be ordered separately. EPS-BB1 EPS-BB4 To accommodate 1 extra To accommodate up to 4 102Ah Battery, extra 102Ah batteries. 15A VOLTAGE PROTECTION PLUG VP15 For home and office use VP10G POWER SUPPLIES, TRANSFORMERS & UPS VP15G No more damaged equipment due to “brown-outs” (low v­ oltage). Protect your fridge and vital equipment now! • Protects against over and u­ ndervoltage supply. • Protects against lightning. • Plugs into your 15Amp socket outlet. Normal working: The relay is switched on and it supplies voltage to the output socket only if the input voltage is within safe limits. The green ‘VOLTS OK’ led is on. The input voltage is measured and the true RMS value is c­ alculated. It is not just an average of the input voltage. Over voltage protection: If the input voltage rises above 253V, the relay will switch off and the red ‘HIGH VOLTS’ led will come on. It will reset if the voltage drops below 248V. Under voltage protection: If the input voltage drops below 190V the relay will stay on and the red ‘LOW VOLTS’ led will flash to indicate a momentarily low voltage. If the voltage doesn’t recover after 3 seconds the relay will switch off and the ‘LOW VOLTS’ led will stay on. If the input voltage drops below 170V, the relay will switch off immediately without the 3 second delay and the ‘LOW VOLTS’ led will stay on. It will reset if the volt- age rises above 195V. Delay: When the unit is connected, it waits for 3 minutes (180 seconds) before switching the output on. Whenever it switches off (over or under volt) it will wait for 3 minutes before switching on again. Code Description Specifications 15A Red Housing VP15R Overvoltage – drop out: 253V – reset: 248V VP15G Undervoltage – drop out: At 190V, 3 sec delay.At 170V inst. off – reset: 195V VP10G 15A Grey Housing • Delay on reconnection: 180s 16A Grey Housing c/w Schuko plug and • Lightning protection: 6.5kA, (Vc = 750V) socket and 1m cable. • LED indicates supply connected For export only • Relay: 16Amps @ 230V BC1 92

LINE INTERACTIVE UPS Line-Interactive Modified Sine Wave UPS - Compact c/w Battery • Software CD (included) • AVR Function. Auto volts regulator Code Watts VA Size (mm) Standby Time No. of Batteries • Over charge/discharge protection • Overload and circuit protection D-650 390 650 145 x 320 x 65 5-10min 1 • LCD Display 1 • Full load backup time: 4mins D-800 480 800 145 x 320 x 65 5-10min 2 • Half load backup time: 16mins 2 • Wide input volts range: 140-275VAC D-1000 600 1000 165 x 370 x 140 5-10min 2 • Output voltage: 230VAC ± 10% 3 • Spare batteries 12V/7AH SY1270 D-1200 720 1200 165 x 370 x 140 5-10min 3 • Spare Software CD: D-UPSSOFT D-1500 900 1500 165 x 370 x 140 5-10min UPS-1700D 1200 1700 165 x 370 x 140 5-10min UPS-2200D 1320 2200 165 x 370 x 140 5-10min Line-Interactive Pure Sine Wave UPS - Units have built-in Battery • Digital Technology Code Watt kVA Size (mm) Standby Standby Max Charge • Intelligent battery Charger Time Full Time Half DC Amps • User - Friendly LCD Display Load Load Volts Int Ext • Fully Functional Protection • Intelligent RS232 Batt Batt 24V 1A 10A Communication Port KI1000 700 1 156 x 450 x 220 6min 10min • Low Battery, Overload short- KI2000 1400 2 198 x 525 x 347 6min 10min 48V 1A 10A circuit and over temperature KI3000 2000 3 198 x 525 x 347 6min 10min 72V 1A 10A • External batteries to be ordered • Wide Input Voltage: 150-300 VAC • Output voltage: 220/240 ±2% separately. Internal batteries to be KI Series Application disconnected if external batteries KRJ Series • Data Centre • Computer Room • Commercial Facility • Hub & Network device • POS • Router are used. KR Series SERVER COMPACT UPS KR31 Series Online Compact Server UPS 1 phase - Without transformer. Units have built-in battery • Output isolation transformer 93 • Full protection function Code Watt kVA Size (mm) Standby Standby DC Max Charge • Intelligent RS232 Time Full Time Half Volts Amps Communication Port Load Load • UPS management software Int Ext (optional) Batt Batt • External battery bank (optional) • SNMP adapter or USB(optional) KR1000-J 700 1 440 x 500 x 2U 6min 15min 36V 1A 5A • Wide Input Voltage: 165 - 275VAC • Output voltage: 220/240 ± 2 % KR2000-J 1400 2 440 x 500 x 2U 5min 15min 72V 1A 4A • External batteries to be ordered separately. Internal batteries to be KR3000-J 2100 3 440 x 500 x 2U 5min 15min 96V 1A 4A disconnected if external batteries KR6000-J 4200 6 440 x 600 x 3U 5min 15min 192V 1A 3A are used. Application • Rack Device • Computer Room • Data Centre • Hub & Network device • POS • Router • Precision Instrument • Commercial Facility Point For Extended Operating Time please see UPS External Battery Cabinets on Page 94 ONLINE UPS Pure Sine Wave UPS - Single phase 230V/230VAC. Without transformer. Units have built-in Battery. • Output isolation transformer Code Watt kVA Size (mm) Standby Standby DC Max Charge • Full protection function Time Full Time Half Volts Amps • Intelligent RS232 Load Load Int Ext Communication Port • UPS management software Batt Batt KR1000 LCD 700 1 156 x 400 x 220 6 min 15min 36V 1A 5A (optional) KR2000 LCD 1400 2 198 x 490 x 347 5 min 15min 72V 1A 5A • External battery bank (optional) 15min 96V 1A 5A • SNMP adapter or USB (optional)POWER SUPPLIES, TRANSFORMERS & UPS KR3000 LCD 2100 3 198 x 490 x 347 5 min 15min • Wide Input Voltage: 165-275VAC 15min KR6000 LCD 4200 6 255 x 640 x 700 5 min 192V 1A 3.5A • Output voltage: 220/240 ± 2 % 192V 1A 3.5A • External batteries to be ordered KR1110S 7000 10 255 x 640 x 700 5 min Application separately. Internal batteries to be • IT Device • Data Centre • Telecommunication • Commercial Facility • Industry disconnected if external batteries For Extended Operating Time please see UPS External Battery Cabinets on Page 94 are used. Pure Sine Wave UPS - 3 Phase (IN) to Single Phase (OUT) Without transformer. Unit only uses • IGBT inverter & output isolation external standby battery connection in Battery Cabinet. 400VAC 3 Phase +N/ 230VAC 1 Phase transformer • High reliability DSP control Code Watts kVA Size (mm) Standby DC Max Charge • Wide input voltage range Time Volts Amps • DC cold start function • Full protection function KR3110 7000W 10 255 x 640 x 700 See table for UPS BCP 192V 6A • Intelligent RS232 /RS485 KR3115 10.5KW 15 255 x 740 x 785 See table for UPS BCP 240V 2.5A Com Port KR3120 16KW 20 255 x 740 x 785 See table for UPS BCP 348V 2.5A • Wide Input Voltage: 380±25%VAC Application • Output voltage : 220 ± 1 % • IT Device • Data Centre • Telecommunication • Commercial Facility • Industry For Extended Operating Time please see UPS External Battery Cabinets on Page 94. BC1

ONLINE UPS Pure Sine Wave UPS - Three Phase (IN) to Three Phase (OUT) Without • IGBT inverter and output transformer. Unit only uses external standby battery connection in battery cabinet. isolation transformer Battery & Battery Box to be ordered separately. • 3 phases UPS allow 100% Code KW kVA Size (mm) Standby Time DC Max Charge unbalance load Volts Amps • Full DSP control, high reliability KR-3310 8 10 400 x 800 x 1180 and performance KR-3320 16 20 400 x 800 x 1180 KR-3330 24 30 400 x 800 x 1180 See table for UPS BCP 348V 4A • Wide input voltage range KR-3340 32 40 500 x 800 x 1600 See table for UPS BCP 348V 6A • DC cold start function See table for UPS BCP 348V 6A • Advanced battery charging See table for UPS BCP 348V 8A management KR-3350 40 50 500 x 800 x 1600 See table for UPS BCP 348V 8A • Intelligent fan speed control KR-3360 48 60 500 x 800 x 1600 See table for UPS BCP 348V 8A Pure Sine Wave UPS - 3 Phase (IN) to 3 Phase (OUT) With Isolation Transformer • ECO mode is available  • Intelligent RS232/RS485 FR-UK33080 64 80 1200 x 800 x 1600 See table for UPS BCP 348V 10 - 40A Communication Port FR-UK33100 80 100 1200 x 800 x 1600 See table for UPS BCP 348V 10 - 40A • Advanced no-master-slave FR-UK33120 96 120 1200 x 800 x 1600 See table for UPS BCP 348V 10 - 40A parallel technology (included) FR-UK33160 128 160 1200 x 800 x 1600 See table for UPS BCP 348V 10 - 40A • Wide Input Voltage: 380/400 FR-UK33200 160 200 1800 x 800 x 2000 See table for UPS BCP 348V 20 - 80A +/-20% VAC • Output voltage: L-N 220/230 +/- Application 1%, L - L 380/400 +/- 1% • Data Centre • Computer Room • Precision Instrument • Intelligent Equipment Extended Operating Time please see UPS BCP. For standby times, please see below EXTERNAL BATTERY CABINET C-Type Battery Cabinet, No Wheels Model Layer Product Battery Capacity Quantity (Panasonic Size) Size (mm) 24Ah/17Ah 2/3 PCs C-1B 1 280 x 190 x 220 17/24/38/65/100Ah 10/6/4/2/2 PCs 17/24/38/65/100Ah 20/16/12/6/6 PCs C-2 1 470 x 390 x 310 17/24/38/65/100Ah 30/24/12/10 PCs 24/38/65/100Ah 56/40/20/20 PCs C-6 2 420 x 450 x 600 65AH/100Ah 24 PCs 65AH/100Ah 32 PCs C-12 3 780 x 455 x 900 Battery Capacity Quantity (Panasonic Size) C-20 4 950 x 455 x 1190 17/24/38/65/100Ah 20/12/8/4/4 PCs C-24 4 1150 x 455 x 1190 17/24/38/65/100Ah 36/20/16/8/8 PCs 24/38/65/100Ah 32/32/16/16 PCs C-32 4 780 x 880 x 1190 24/38/65/100Ah 40/40/20/20 PCs A-Type Battery Cabinet, c/w Wheels Model Layer Product Size (mm) BAT-A4 2 420 x 450 x 670 BAT-A8 2 760 x 450 x 770 BAT-A16 4 780 x 455 x 1360 BAT-A20 4 950 x 455 x 1360 EXTERNAL BATTERIES FOR EXTENDED BACK-UP TIME KR1000-J KR2000-J KR3000-J KR6000-J KR KR KR KR KR- KR- KR- KR- KR- KR- FR-UK FR-UK FR-UK FR-UK FR-UK POWER SUPPLIES, TRANSFORMERS & UPS 1110S 3110 3115 3120 3310 3320 3330 3340 3350 3360 33080 33100 33120 33160 33200Code KR1000- KR2000- KR3000 KR6000 LCD LCD LCD LCD 29 29 29 29 29 29 29 29QTY 3 6 8 16 16 16 20 29 29 29 29 - - - - -- - -Batteries - - - - -- - - - - - - -- - -Ah Back-Up Time ( Minutes) - - - - -- - - -- - - 27m 22m - - -- - -7Ah 20m 20m 18m 18m 11m 11m - 38m 31m 26m 20m -- - - 47m 37m 31m 24m 20m - - -12Ah 33m 33m 29m 29m 19m 19m 16m - 28m - - 58m 47m 39m 30m 24m 21m 16m - - - - 59m 47m 39m 30m 24m24Ah 67m 67m 59m 59m 35m 35m 29m 41m 56m - - - - - 117m 94m 78m 59m 47m - - - - -- - 94m35Ah 97m 97m 86m 86m 51m 51m 49m 53m 82m - - 9445Ah 125m 125m 111m 111m 66m 66m 55m 76m 106m 53m 35m65Ah 180m 180m 160m - - 96m - - 152m 76m 50m80Ah - - - - --- - - 94m 62m100Ah - - - - - - - -- - -200Ah - - - - - - - -- - -200Ahx2 - - - - - - - -- - -200Ah x4 - - - - - - - -- - - BC1

AUTOMATIC VOLTAGE REGULATORS (A.V.R) Output of this mains stabiliser is regulated Constant Voltage Transformer (C.V.T.) - 230/230V* to within 1% for input -15% to +20% of nominal range Code Max Supply Load Back Up Dimensions Weight Output Connection Connection 1P CB (mm) (kg) TE 300 1.3A 16A Plug 1 x 16A Socket 20A 260 x 188 x 360 17 260 x 188 x 360 22 TE 500 2.2A 16A Plug 1 x 16A Socket 20A 260 x 188 x 360 25 260 x 188 x 360 31 TE 750 3.3A 16A Plug 1 x 16A Socket 20A 330 x 350 x 400 44 330 x 350 x 400 50 TE 1000 4.3A 16A Plug 1 x 16A Socket 20A 330 x 350 x 400 68 370 x 426 x 450 78 TE 1500 6.5A 16A Plug 1 x 16A Socket 20A 370 x 426 x 450 100 420 x 460 x 600 120 TE 2000 8.7A 16A Plug 1 x 16A Socket 20A 420 x 460 x 600 135 420 x 460 x 600 150 TE 3000 13A 16A Plug 1 x 16A Socket 20A TE 4000 17.4A Terminals 2 x 16A Sockets 25A TE 5000 21.7A Terminals 2 x 16A Sockets 32A TE 6000 26.1A Terminals Terminals 32A TE 7000 30.4A Terminals Terminals 40A TE 8000 34.8A Terminals Terminals 40A * S pecify voltage when ordering. Other voltages made on request. Single Phase Voltage Regulator (Output load regulation 1% or 3% selectable) Digital display Code Output Amps Output Connector Size (mm) Kgs 230 x 120 x 150 SDC-1000VA 4.35A Socket 260 x 140 x 170 6.2kg SDC-1500VA 6.50A Socket 260 x 140 x 170 7.3kg SDC-2000VA 8.70A Socket 310 x 220 x 250 7.9kg SDC-3000VA 13A Terminals 310 x 220 x 250 11kg SDC-5000VA 21A Terminals 430 x 465 x 305 13kg SDC-8000VA 34A Terminals 430 x 465 x 305 22kg SDC-10KVA 43A Terminals 27kg Single Phase Compact AVR (Output regulation 8%) SR-500VA 2.1A Socket 241 x 169 x 90 1.78kg SR-1000VA 4.35A Socket 241 x 169 x 90 4.3kg SR-1500VA 6.50A Socket 261 x 169 x 114 5.2kg Specifications • Technology: servo motor type transformer • Protection: High voltage protection • Input Voltage: 140VAC - 260VAC Low voltage protection • Input Frequency: 50/60Hz High temperature protection • Output Voltage: 230VAC Overload protection • Efficiency: 98% • Delay time protection • Display: LED display input voltage/output voltage • Short circuit protection Single Phase Voltage Regulator (Output load regulation 3%) Analogue display Code Output Amps Output Connector Size (mm) Kgs MVR-500VA 2.1A Socket 248 x 170 x 158 3.8kgPOWER SUPPLIES, TRANSFORMERS & UPS MVR-1000VA 4.35A Socket 263 x 180 x 170 6.2kg APR-1200B 5.2A Socket 200 x 250 x 140 6.0kg Features • Servo motor type • Input voltage range: 140-260VAC • Protection: High voltage protection • Output voltage: 220VAC Low voltage protection • Analogue input and output voltage display High temperature protection Overload protection Single Phase Voltage Regulator with zero - cross switching technology - (Output regulation 5%) E-600 1.3A Socket 210 x 140 x 135 3.0kg E-1200 2.6A Socket 210 x 140 x 135 3.5kg E-2400 5.2A Socket 240 x 160 x 120 5.3kg Features • Relay type automatic voltage regulator • Protection: High voltage protection Low voltage protection • Input Voltage range: 140VAC - 280VAC High temperature protection • Input Frequency: 50/60Hz Time delay protection • Output Voltage: 230VAC Short circuit protection • Efficiency: 98% • Output accuracy: ±5%95 BC1

THREE PHASE VOLTAGE REGULATOR 3 Phase Voltage Regulator (Output Load Regulation 2%) - Input Volts ±15% 400V + N Code Capacity Current (220V) Current Size Weight (380V) Wx D x H ARD-3010 KVA KW 26A 50kg ARD-3015 39A 15A 280 x 380 x 620 58kg ARD-3020 10KVA 8KW 52A 22A 280 x 380 x 620 85kg ARD-3030 15KVA 12KW 78A 30A 360 x 460 x 810 100kg ARD-3045 20KVA 16KW 118A 45A 360 x 460 x 810 115kg ARD-3060 30KVA 24KW 157A 68A 360 x 460 x 810 140kg ARD-3080 45KVA 36KW 210A 91A 420 x 550 x 960 165kg ARD-3100 60KVA 48KW 263A 121A 420 x 550 x 960 230kg ARD-3120 80KVA 64KW 315A 152A 420 x 550 x 960 620kg ARD-3150 100KVA 80KW 394A 182A 550 x 800 x 1700 750kg 120KVA 96KW 228A 550 x 800 x 1700 150KVA 120KW 3 Phase Voltage Regulator (Output Load Regulation 2%) - Input Volts ±30% 400V + N HRD-45KVA 45KVA 36kW 118A 68A 800 x 500 x 1000 240kg HRD-60KVA 60KVA 48kW 157A 91A 800 x 500 x 1000 280kg HRD-80KVA 80KVA 64kW 210A 121A 800 x 500 x 1000 320kg HRD-120KVA 120KVA 96kW 315A 182A 550 x 800 x 1700 620kg HRD-150KVA 150KVA 120kW 394A 228A 550 x 800 x 1700 750kg HRD-200KVA 200KVA 160kW 530A 300A 550 x 800 x 1700 900kg Specifications Features • Output voltage range: ±1% ~ ±5% adjustable • Low iron loss high magnetic intensity silicon • Output precision: standard ±2% steel, closed slots design • Respond time: <0.042sec • Overheat bypass: main coil temperature >130˚C, transfer to • High full groove ratio winding technique bypass automatically ARD series is the most reliable AVR with • Protection: input low voltage/ output high voltage/ open-phase magnetoelectric technology. • Energy saving function: auto power cut off without loading All these efforts make our AVR unique with • Efficiency: ≥98% (at full load) lowest line loss and voltage drop. Moreover, • Output low/ high voltage/ open-phase voltage protection compact size, light-weight, high efficiency and Isolated voltage detection circuit. Settable voltage protection high reliability are their most significant points. Auto cut off for abnormal voltage output and audible alarm. characteristics. Non-contact design makes this • Resists unbalanced current AVR different to the traditional carbon brush or Double lap winding design. Even when phase loading is 50% relay type AVR, without sparking/arc. We can unbalanced, voltage drop between wires will not happen say ARD series is the best voltage regulator for industrial usage. INNOVOLT POWER PROTECTOR (MANAGER)This essential electronics protection appliance continuously monitors AC power using advanced microprocessor-based technologies and remediates againstthe ill effects of power disturbances. With LCD screens alerting to issues immediately, the Power Manager provides deluxe protection and monitoring. Inconjunction with the Power Doctor or Power Doctor SmartPhone Adaptor and the Innovolt Management Cloud, you can graphically view and analyze thenumber and type of disturbances your Innovolt appliance has protected against. PM16 PD2 - Power Doctor PDSA100 - Power Doctor POWER SUPPLIES, TRANSFORMERS & UPS Smart Phone Adaptor PM30 Power Managers AccessoriesCode PM16 PM30 PD2 PDSA100Nominal Operating Voltage 230VAC 50Hz 220 - 240VAC 50Hz • Optical communication from all • Plugs into smartphone and usingMax Continuous Current 16A 30A Innovolt power products the Innovolt App, optically readsInterrupt Rating per UL Standard 1077 3500A 3500A • USB communication to any PC data from LEDs on the InnovoltCatastrophic Overvoltage Disconnect Time <8ms <8ms • LCD shows disturbance history power appliancesOver Voltage Limit >260VAC ± 4V >260VAC ± 4V • Data available for analysis from • Apple iOS compatibleUnder Voltage Limit <180VAC ± 4V <180VAC ± 4V any web-enabled device via the • Data available for analysis fromOvervoltage Clamping Voltage L-N 800V, L-G 800V, N-G 800V L-N 900V, L-G 800V, N-G 800V Innovolt Management Cloud any web-enabled device via theSize (mm) 57.2H x 152.4W x 228.6L 88.9H x 210.1W x 290.1L Innovolt Management CloudFeatures • Industry leading defense against current inrush • 3-Stage MOV protection against voltage surges resulting from voltage sags & brownouts • 4th order, two stage EMI/RFI filtering• Microprocessor-based protection algorithms • Ultra-fast reaction to dangerous over voltage • Data & telephone protection circuits• LCD display shows disturbance history • Post-blackout reclose sequence protection • UL listed• Compatible with the Power Doctor and Power Doctor SmartPhone Adaptor BC1 96

1 PHASE VOLTAGE GUARDS AND SURGE LIMITERS Micro processor designed voltage monitoring that safely disconnects sensitive electrical/electronic devices from dangerous voltage fluctuations. Reconnection is automatic when voltage has stabilised. Includes protection against • Spikes • Surges • Lightning Code FRIDGEGUARD-* VOLTGUARD-* AVS15-* AVS30A NOTEBOOK-** Nominal Voltage 230VAC 230VAC 230VAC 230VAC 85 - 265VAC 1A Current Rating 6A 7A 15A 30A <10ns Mains/Surge/Spike response <10ns <10ns <10ns <10ns 9kA <20ms Surge/Spike Amps 6.5kA 6.5kA 6.5kA 6.5kA 1s 265VAC Response time over voltage ― <20ms <20ms <20ms 255VAC 85VAC Response time under voltage 0.5s 0.5s 1s 0.5 - 10s 95VAC 10sec High voltage disconnect (HVD) ― Adjustable 255 - 265V 260V Adjustable 230 - 300V High voltage re-connect ― 2V below HVD 3 - 7V below HVD 3-5V below HVD Low voltage disconnect (LVD) Adjustable 180-190V Adjustable 180-190V 185V Adjust. 150-230V (PH-N) Low voltage re-connect 5V above LVD 5V above LVD 3 - 7V below HVD 3-5V above LVD Reconnect delay 3min 30s/3min 2 - 5min 10s - 10min * Add to code R16 = 16A SA Plug, SC = SCHUKO Plug. ** Add to code CL = Clover Leaf connector, F8 = FIG8 connector 3 PHASE VOLTAGE GUARDS AND SURGE LIMITERS Micro processor designed voltage monitoring that safely disconnects sensitive electrical/electronic devices from dangerous voltage fluctuations. Reconnection is automatic when voltage has stabilised. Includes protection against • Spikes • Surges • LightningPOWER SUPPLIES, TRANSFORMERS & UPS Code AVS3P-0 AVS303-37 AVS303-60 Nominal Voltage 230VAC(PH-N) 230VAC(PH-N) 230VAC(PH-N) Current Rating 1xC/O Contact (16A) 37A 60A Mains/Surge/Spike response <10ns <10ns Surge/Spike Amps <10ns 6.5kA 6.5kA Response time over voltage 6.5kA 20ms 20ms Response time under voltage 0.5s 1s 1s High voltage disconnect (HVD) High voltage re-connect 1s Adjustable 230 - 300VAC (PH-N) Adjustable 230 - 300VAC (PH-N) Low voltage disconnect (LVD) Adjustable 230 - 300VAC (PH-N) 4V below HVD 4V below HVD Low voltage re-connect Reconnect delay 4V below HVD Adjustable 150 - 230VAC (PH-N) Adjustable 150 - 230VAC (PH-N) Adjustable 150 - 230VAC (PH-N) 4V above LVD 4V above LVD 97 10s-10min 10s-10min 4V above LVD 10s-10min BC1

SOLAR DC POWER KITS Solar Shed Light Solar Torch Solar Camp Light Solar Desk Lamp Solar Basic Light- High Quality PV- Super Bright LED- Rechargeable BatteryCode BSL-P0807W BSS-00107 BSS-00207 BSS-00213 DE-303 Lithium Ni-MhBattery Type Lithium Lithium Lithium 9hrs full charge 7hrs full charge 1W / 120lmBattery Life 5hrs full charge 0.6W / 50lm 6 / 24hrs full charge 5 / 11 / 66hrs full charge 3m Cable Lamp HolderLamp Power/Lumen 0.4W / 35lm 1.2 / 0.2W / 110/20lm 0.7W / 45lm Portable Solar Lamp Solar Travel LightAccessories PV Panel Holder, Pull cord Carry Holder, Cell Accessories Cell Accessories Solar Junior Light Portable Solar Lamp Portable Solar Lamp 3 Light Levels- High Quality PV- Super Bright LED- Rechargeable BatteryCode BSS-00314LH BX-H09 MRD-401 MRD-401/2 MRD-401/4Battery Type LithiumBattery Life Lithium 3.7V / 4400mAH Lithium 3.7V / 2000mAH Lithium / Lamp 3.7V / 2000mAH Lithium / LampLamp Power/Lumen 7hrs full chargeAccessories 1.5W / 120lm 80 / 4hrs full charge 7 - 8hrs Full brightness 6 - 8hrs Full brightness 7 - 8hrs Full brightness Cell Accessories 1W / 380lm 1.7W / 120lm 1.7W / 120lm per lamp 1.7W / 120lm per lamp Cell Accessories, AC Adapter USB Cable, Mini USB -- Solar Power Bank Solar Power Bank Solar Lantern Solar Lamp Solar Lamp- High Quality PV- Super Bright LED- Rechargeable BatteryCode WAKA-L WAKA-P SG-MYLAMP SG-MYLITE SG-MYLIGHT+Battery Type 2200mAh Lithium 2200mAh Lithium 2200mAh Lithium 1500mAh Lithium 4000mAh LithiumBattery LifeLumen Up to 8hrs Up to 150hrs Up to 8hrs Up to 6hrs Up to 8hrsAccessories 70lm 75lm 120lm 90lm 200lm - - - - USB Charging Cable Solar Powerpack 3.0 Inflatable LED Light Solar Backpack Charger Solar Cell Phone Charger Solar Carry Bag c/w charger- High Quality PV SOLAR- Super Bright LED- Rechargeable BatteryCode BSS-00318 FNA-SL1533 CB-03 SC-17PRO ES-130Battery Type Lithium Li-Polymer (100mAh)Battery Life High: 6hrs, Low: 12hrs Li-Ion Li-Ion Battery, 5V 500mAh Lithium, 3000mAhLamp Power / Lumen High: 4hrs, Low: 11hrsAccessories 1W 1W (90lm High) 4hrs full charge 2hrs full charge Dependant on device - Cell Accessories - -- Mini Controller with 5V 4 Adaptors for iPhone/ iPod, Blackberry, 500mA USB + LED Lights. Mobile Phone, for Ipod Samsung Phone Connectors or Camera SOL2 98

Solar Barber Kit SOLAR DC POWER KITS Solar Kit Lithium Ecoboxx Qube 50 Ecoboxx Qube 90 Ecoboxx Qube 160 - High Quality PV - Super Bright LED - Rechargeable Battery Code BARBER KIT ECOBOXX 50 ECOBOXX 90 c/w 100W Inverter 3 Light Levels Lead Acid Lead Acid ECOBOXX 160 Battery Type Lead Acid SW-SK-3W Up to 16 hrs full charge Up to 30 hrs full charge Lead Acid Lithium Battery Life Up to 16 hrs full charge 2 x 3W / 324lm 4 x 3W / 324lm Up to 52 hrs full charge Up to 45hrs full charge Lamp Power/Lumen 2 x 2W / 160lm USB to Charge Phone USB to Charge Phone 2 x 3W / 324lm 3W / 44lm USB to Charge Phone Accessories 10in1 USB Phone Charger, Solar Home Light 4 USB Cable with 10 Plugs Hair Clipper & USB Fan Solar Home Light 2 Solar Complete Home Kit Solar Complete Home Kit Solar Home Light 5 - High Quality PV Each light - Super Bright complete LED with switch - Rechargeable Battery Spare Lamp- SLL-L1515 Spare Lamp- SLL-L1515 Code BSS-00504LH BSS-01004LH JY-30 JY-60 SW-HS-5L Battery Type Lithium Lithium Lead Acid Lead Acid Lithium Battery Life 8/ 4 hrs full charge 18/ 9 hrs full charge 8 hrs full charge 8 hrs full charge Up to 26 hrs full charge Lamp Power/Lumen 1.5W / 140lm 3W / 290lm 5W / 360lm 1.25W / 100lm 1.5W / 140lm Accessories Cell Accessories Cell Accessories DC Fan, Cell Accessories 15\" TV, DC Fan, Cell Accessories USB Cable with 10 Plugs Portable 4 Lamp Home Kit Portable 6 Lamp Home Kit Solar Junior Light 2 Solar Home Light Solar Home System - High Quality PV Cellphone not included MRD-308 Spare Lamp- BSS-LAMP Spare Lamp - BSS-LAMP NEWRWIATHDIO - Super Bright MRD-426 Lead Acid BSS-00311S BSS-00504S LED Lithium 10hrs full charge Lithium Lithium HS-DC-5W - Rechargeable 3W / 270lm Lead Acid Battery 17hrs full charge USB, Cell Accessories 18/9hrs full charge 72/18hrs full charge 14h/2 lights, 7h/4 lights 2W / 160lm 0.6W / 50lm 0.6W / 50lm 1W / 80lm Code Portable 2 Lamp Home Kit USB, Cell Accessories Battery Type USB, Cell Charger Cell Accessories Cell Accessories LED Solar Lantern Battery Life LED Solar Lantern LED Solar Lantern Lamp Power/Lumen Accessories Solar Light & RadioSOLAR - High Quality PV - Super Bright LED - Rechargeable Battery Code BX-FD016-1F BX-FD009-2 SHTD-07 SL33205 SP-CPL13A Battery Type 4500mAh Lead Acid 2600mAh Lithium 1800mAh Lithium 900mAh Lithium 900mAh Lithium Battery Life High 7hrs / Low 22hrs High 10hrs / Low 20hrs Lamp Power/Lumen Up to 16hrs Up to 4hrs Up to 4hrs Accessories 0.9W / 100lm 0.9W / 100lm 0.3W / 500lm 1.2W / 45lm 1.2W / 45lm USB Port with 5 in 1 USB Port with 5 in 1 USB outlet / AC charger 5V USB Output99 Charger, FM Radio Hand crank charger - (No Cable) Charger SOL2