2021-Online-Catalogue-AU-FINAL

201PRODUCT CATALOGUE 20215-6CARBON STEEL FERRULES† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.MULTISPIRAL FERRULESSFM6SSPIRAL HOSE SWAGE FERRULESKIVE SWAGE FERRULE FOR MULTI SPIRAL 6 WIRE HOSE•FOR HYDRAULINK HX6K-24 AND HX6K-32 HOSE ONLY.Part NumberHose I.D inchesHose I.D (mm)Dash sizeLength - L (mm)I.D - d (mm)O.D - D (mm)SFM6S-241 1/238.02490.057.568.0SFM6S-32251.032102.07084.0MULTISPIRAL FERRULESGSF4NSPIRAL HOSE SWAGE FERRULEGATES GS NON SKIVE SWAGE FERRULE FOR GATESSPIRAL 4 WIRE HOSE•FOR GATES EFG4K HOSE ONLY.•USE WITH GATES GS SERIES HOSETAILS ONLY.Part NumberGates CodeHose I.D inchesHose I.D (mm)Dash sizeLength - L (mm)O.D - D (mm)GSF4N-2020GS1F-41 1/431.82067.861.5MULTISPIRAL FERRULESGSF6NSPIRAL HOSE SWAGE FERRULEGATES GS NON SKIVE SWAGE FERRULE FOR GATESSPIRAL 6 WIRE HOSE•FOR GATES 20EFG5K & 20EFG6K HOSE ONLY.•USE WITH GATES GS SERIES HOSETAILS ONLY.Part NumberGates CodeHose I.D inchesHose I.D (mm)Dash sizeLength - L (mm)O.D - D (mm)GSF6N-2020GS1F-61 1/431.82072.967.8

202PRODUCT CATALOGUE 20215-7CARBON STEEL FERRULES† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.BRAIDED FERRULESSFBNBRAIDED HOSE SWAGE FERRULENON-SKIVE SWAGE FERRULE FOR ONE & TWO-WIREHOSEPart NumberHose I.D inchesHose I.D (mm)Dash sizeLength - L (mm)I.D - d (mm)O.D - D (mm)SFBN-041/46.30426.015.722.0SFBN-055/168.00527.517.524.0SFBN-063/810.00630.019.825.0SFBN-081/212.50832.523.130.0SFBN-105/816.01035.026.534.0SFBN-123/419.01240.030.238.0SFBN-16125.41655.039.046.0SFBN-201 1/431.82065.049.560.0SFBN-241 1/238.02475.056.067.0SFBN-32251.03286.069.080.0BRAIDED FERRULESSFKNBRAIDED HOSE SWAGE FERRULENON-SKIVE SWAGE FERRULE FOR ONE-WIRE & COMPACTHOSEPart NumberHose I.D inchesHose I.D (mm)Dash sizeLength - L (mm)I.D - d (mm)O.D - D (mm)SFKN-033/164.80324.013.518.5SFKN-041/46.30426.014.320.5SFKN-063/810.00626.518.324.5

203PRODUCT CATALOGUE 20215-8CARBON STEEL FERRULES† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.THERMOPLASTIC FERRULESSFTTHERMOPLASTIC HOSE FERRULENON-SKIVE SWAGE FERRULE FOR THERMOPLASTICHOSEPart NumberHose I.D inchesHose I.D (mm)Dash sizeLength - L (mm)I.D - d (mm)O.D - D (mm)SFT-033/164.8032611.515SFT-041/46.3042912.917SFT-055/167.90530.515.820SFT-063/89.5063217.522SFT-081/212.70832.521.327SCNT-105/815.9103627.334SFT-123/419.0124128.234.5R5 FERRULESSNVR5 SWAGE FERRULEFOR GATES C5 HOSEPart NumberHose I.D inches(Nominal Bore)Suits Hose DashSizeLength - L (mm)I.D - d (mm)O.D - D (mm)SNV-033/16042710.614SNV-041/40529.015.219.0SNV-055/160630.018.422.0SNV-0613/320831.019.924.0SNV-081/21034.024.728.5SNV-105/81236.028.032.0SNV-123/4194232.638

204PRODUCT CATALOGUE 20215-9CARBON STEEL FERRULES† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.PTFE FERRULESSP1PTFE SWAGE FERRULESWAGE FERRULE FOR PTFE SMOOTH TRUE BORE HOSEPart NumberHose I.D inchesHose I.D (mm)Dash sizeLength - L (mm)I.D - d (mm)O.D - D (mm)SP1-033/164.80326.010.114.0SP1-041/46.40429.011.317.5SP1-055/168.00529.012.017.5SP1-063/89.50630.014.519.1SP1-081/212.70833.017.122.2SP1-105/815.91036.022.028.6SP1-123/4191242.024.031.8SFP1B-16125.41660.035.241.3

13PRODUCT CATALOGUE 2019FIELD ATTACHABLE HOSE TAILSSECTION 6

206PRODUCT CATALOGUE 20216 - 1PAGENERAL INFORMATIONINFORMATION - FIELD ATTACHABLESThe ber cModModModModThe Hydraulink range of hose couplings are available in three main series; Swage, Field Attachable (often referred to as reusable) and Push-on.The eld attachable series hosetail is designed for use with SAE 100R1AT and SAE 100R2AT hose. ¿The eld attachable ferrule is selected to match the relevant hose. Please note that Hydraulink eld ¿¿attachable hosetails should only be used with the eld attachable ferrules listed in section six of this ¿catalogue.Hydraulink thread forms and sealing methods are manufactured to the relevant international stan-dards where applicable. All dimensions shown are nominal, and subject to change due to ongoing product development. For critical applications, please contact Hydraulink to con rm dimensions.¿Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci -¿cation of any product listed in this catalogue.5www.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCwww.hydrauOur product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

207PRODUCT CATALOGUE 2021ART NUMBERING SYSTEM – FIELD ATTACHABLE COUPLINGSINFORMATION - FIELD ATTACHABLES05 Hydraulink part numbering system is a concise product description in coded form. The part num-The Hydraulink part numbering system is a concise product description in coded form. The part num-consists of four modules as follows:ber consists of four modules as follows:dule 1. Pre x letter; Module 1. ¿ denotes coupling type.S = Swage R = Field Attachable (Reusable) = Field Attachable (Reusable) P = Push-on R5 = Field Attachable (Reusable) to suit SAE 100R5 hose Attachable (Reusable) to suit SAE 100R5 hose SU = Suction tail.dule 2. Series Numbers;Module 2. denotes the thread form or sealing method (coupling end) and the denotes the thread form or sealing method (coupling end) and thecon guration of the hosetail. ¿E.g.; series code #51 denotes a BSPP swivel nut female in a swept 90° con guration, swivel nut female in a swept 90° con guration,¿series code #29 denotes a JIC female swivel nut in a compact 90° con guration.series code #29 denotes a JIC female swivel nut in a compact 90° con guration.¿Please refer to the following “Series Codes and Descriptions” for further informationPlease refer to the following “Series Codes and Descriptions” for further informationregarding coupling ends and con gurations.regarding coupling ends and con gurations.¿dule 3. Coupling end size; Module 3. denotes the size of the thread form or sealing method of thedenotes the size of the thread form or sealing method of thehosetail. Sizes are expressed as follows;hosetail. Sizes are expressed as follows;English/American threads; expressed in 1/16th inch increments denoting the key diameter. English/American threads; expressed in 1/16th inch increments denoting the key diameter. For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”.For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”.Metric threads; expressed in millimetres with pre x M, denoting the key diameter. x M, denoting the key diameter. ¿For example; M10 = 10mm O.D. thread.For example; M10 = 10mm O.D. thread.Flanges; express the nominal size of the ange head. Nominal sizing refers to the maximumange head. Nominal sizing refers to the maximum Àinternal bore. For example a 12 ange head would have a maximum internal bore of 12/16 = 3/4”.ange head would have a maximum internal bore of 12/16 = 3/4”.ÀPlease refer technical section for further information regarding coupling ends, thread formsPlease refer technical section for further information regarding coupling ends, thread formsand sealing methods.dule 4. Hosetail outside diameter; Hosetail outside diameter; denotes both the nominal O.D. of the hosetail and the I.D denotes both the nominal O.D. of the hosetail and the I.Dof the hose it would suit. Sizes are expressed in 1/16th inch increments.of the hose it would suit. Sizes are expressed in 1/16th inch increments.For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”.For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”.ble se. eld his -g i -5ulink.com1010 p02SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoC6 - 2PART NUMBERING SYSTEM – FIELD ATTACHABLE COUPLINGSINFORMATION - FIELD ATTACHABLESPre x letter;¿ denotes coupling type.S = Swage FP = Push-on R5 = Field SU = Suction tail. Series Numbers;con guration of the hosetail. ¿E.g.; series code #51 denotes a BSPP¿¿¿Coupling end size; Metric threads; expressed in millimetres with pre¿Flanges; express the nominal size of the Àinternal bore. For example a 12 Àand sealing methods.Module 4. ¿502SROTwww.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r yoCOur product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

208PRODUCT CATALOGUE 20216 - 3SEPART NUMBERING SYSTEM – EXAMPLESINFORMATION - FIELD ATTACHABLESCODE0102030405060708091011110121313R133135141516171819202122225226232362425262728293031323334353637383939N39F40S40N41424344454564646546647484950Part number: 01-0606FComplete desription: 3/8” BSPP swivel nut female x 3/8” hose tail, straight eldattachable coupling.Part number: 64-1206FComplete desription: 3/4” JIC swivel nut female x 3/8” hose tail, swept 45° eld attachable coupling.Module 3. Coupling end size³ ´ IRU WKV ´Module 4. Hosetail O.D.³ ´ IRU WKV ´Module 1. Prefix letter³ ´ IRU ILHOG DWWDFKDEOH FModule 2. Series code³ ´ IRU %633 VZLYHO QXWIHPDOH VWUDLJKW FRXSOLQJF 01 - 06 06Module 3. Coupling end size³ ´ IRU WKV ´Module 4. Hosetail O.D.³ ´ IRU WKV ´Module 1. Prefix letter³ ´ IRU ILHOG DWWDFKDEOH FModule 2. Series code³ ´ IRU -,& VZLYHO QXWIHPDOH VZHSW FRXSOLQJR5www.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCwww.hydraOur product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice“12” for 12/16ths - 3/4”F 64 - 06 0612 06

209PRODUCT CATALOGUE 2021ERIES CODES AND DESCRIPTIONS - HOSETAILSINFORMATION - FIELD ATTACHABLES05E DESCRIPTIONCODE DESCRIPTIONBSP PARALLEL SWIVEL NUT FEMALE51BSPP SWIVEL NUT FEMALE 90° SWEPT BENDBSP PARALLEL SWIVEL NUT FEMALE FLATFACE52ORFS SWIVEL NUT FEMALE 90° SWEPT BENDSAE SWIVEL NUT FEMALE53METRIC ISO/GAZ SWIVEL NUT FEMALE 90° SWEPT BENDJIC SOLID (FIXED) FEMALE54SAE CODE 62 FLANGE 60° SWEPT BENDJIC SWIVEL NUT FEMALE545CAT XT5 FLANGE 60° SWEPT BENDBSPT SOLID (FIXED) FEMALE55JIC SWIVEL NUT FEMALE 90° SWEPT BENDNPSM SWIVEL NUT FEMALE56ORFS SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDBSP PARALLEL SOLID (FIXED) FEMALE57BSPP SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDSAE MALE58JIC SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDSAE INVERTED FLARE MALE59SAE CODE 61 FLANGE 90° SWEPT BENDNPTF SOLID (FIXED) FEMALE60BSPP SWIVEL NUT FEMALE 45° SWEPT BENDSAE CODE 61 FLANGE 110° SWEPT BEND61SAE CODE 62 FLANGE 90° SWEPT BENDBSP PARALLEL MALE615CAT XT5 FLANGE 90° SWEPT BENDORFS SWIVEL NUT FEMALE616O&K SAE CODE 62 FLANGE 90° SWEPT BENDORFS SWIVEL NUT FEMALE, SHORT STEM62SAE CODE 62 FLANGE 45° SWEPT BENDORFS SWIVEL NUT FEMALE 30° SWEPT BEND625CAT XT5 FLANGE 45° SWEPT BENDSAE CODE 61 FLANGE 135° SWEPT BEND626O&K SAE CODE 62 FLANGE 45° SWEPT BENDBSP TAPER MALE SWIVEL63ORFS SWIVEL NUT FEMALE 45° SWEPT BENDBSP TAPER MALE 64JIC SWIVEL NUT FEMALE 45° SWEPT BENDNPTF MALE65MINI-CHECK TEST POINT METRIC FEMALE/SPIGOTMETRIC MALE (STUD END)66SAE CODE 61 FLANGE 60° SWEPT BENDJIC MALE67SAE CODE 61 FLANGE 22.5° SWEPT BENDUNO MALE SWIVEL674SAE CODE 62 FLANGE 22.5° SWEPT BENDUNO MALE 675CAT XT5 FLANGE 22.5° SWEPT BENDPOCLAIN FLANGE68SAE CODE 61 FLANGE 45° SWEPT BENDSAE CODE 62 FLANGE STRAIGHT69SAE CODE 61 FLANGE 67.5° SWEPT BENDCAT XT5 FLANGE STRAIGHT695CAT XT5 FLANGE 67.5° SWEPT BENDO&K SAE CODE 62 FLANGE STRAIGHT70JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALESAE CODE 61 FLANGE STRAIGHT71JIS ( KOMATSU ) FLANGE STRAIGHTO&K SAE CODE 61 FLANGE STRAIGHT72JIS ( KOMATSU ) FLANGE 90° SWEPT BENDBSPT MALE SWIVEL 90°73JIS ( KOMATSU ) FLANGE 45° SWEPT BENDBSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT74FRENCH GAZ METRIC SWIVEL NUT FEMALEBSPT MALE 90° COMPACT75JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALESAE SWIVEL NUT FEMALE 90° COMPACT76DIN METRIC 60° CONE SWIVEL NUT FEMALEJIC MALE SWIVEL 90° COMPACT77METRIC GLOBESEAL SWIVEL NUT FEMALEJIC SWIVEL NUT FEMALE 90° COMPACT78HEAVY DIN METRIC MALEWATERBLAST SWIVEL NUT FEMALE79HEAVY DIN METRIC SWIVEL NUT FEMALEDIN METRIC 60° CONE MALE STRAIGHT80LIGHT DIN METRIC MALEUNO MALE SWIVEL 90° COMPACT81LIGHT DIN METRIC SWIVEL NUT FEMALEJIC MALE 90° COMPACT82METRIC STANDPIPEJIS (KOMATSU) METRIC MALE83HEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BENDJIS 30° FLARE (MITSUBISHI) MALE84HEAVY DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BENDBSP TAPER MALE 45°85HEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACTSAE SWIVEL NUT FEMALE 45° SWEPT BEND86LIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BENDBANJO87LIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BENDPOCLAIN FLANGE88LIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACTPOCLAIN FLANGE 90°89JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 90° SWEPT BENDPOCLAIN FLANGE 45°90HOSE JOINERORFS MALE91JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEM. 90° SWEPT BENDNORFS MALE 90° SWEPT BEND92IMPERIAL STANDPIPESAE SWIVEL NUT FEMALE 90° SWEPT BEND93METRIC 90° STANDPIPE SAE INVERTED FLARE MALE 45° SWEPT BEND94SAE IMPERIAL TUBE CONNECTORSAE INVERTED FLARE MALE 90 SWEPT BEND95DIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT BENDKOBELCO METRIC MALE96LIFESAVERSAE CODE 61 FLANGE 30° SWEPT BEND97WEO (CEJN) STRAIGHT STANDPIPE O&K SAE CODE 61 FLANGE 30° SWEPT BENDSAE CODE 62 FLANGE 30° SWEPT BENDCAT XT5 FLANGE 30° SWEPT BENDO&K SAE CODE 62 FLANGE 30° SWEPT BENDFRENCH GAZ METRIC MALE JIS ( KOMATSU ) METRIC MALESUFFIX CODES FOR SERIES CODESSTAPLELOCK FEMALE STAPLELOCK MALENNINETY DEGREE e.g. S40NFFORTY FIVE DEGREE e.g. S40FS SWIVEL MALE e.g. SI8SKCOMPACT BLOCK 45° e.g. S64K, S60KCCYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01CHHEXAGONAL BAR TAIL STYLE e.g. S05HGSGATES GLOBAL SPIRAL NON-SKIVE e.g. S66-2020GSPCMGATES SPIRAL SKIVE TYPE e.g. SMS15-24PCMSUFFIX CODES FOR PART NUMBERS5aulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoC6 - 41002SROTwww.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCSERIES CODES AND DESCRIPTIONS - HOSETAILSINFORMATIONCODEDESCRIPTIONCODE01BSP PARALLEL SWIVEL NUT FEMALE5102BSP PARALLEL SWIVEL NUT FEMALE FLATFACE5203SAE SWIVEL NUT FEMALE5304JIC SOLID (FIXED) FEMALE5405JIC SWIVEL NUT FEMALE54506BSPT SOLID (FIXED) FEMALE5507NPSM SWIVEL NUT FEMALE5608BSP PARALLEL SOLID (FIXED) FEMALE5709SAE MALE5810SAE INVERTED FLARE MALE5911NPTF SOLID (FIXED) FEMALE60110SAE CODE 61 FLANGE 110° SWEPT BEND6112BSP PARALLEL MALE61513ORFS SWIVEL NUT FEMALE61613RORFS SWIVEL NUT FEMALE, SHORT STEM62133ORFS SWIVEL NUT FEMALE 30° SWEPT BEND625135SAE CODE 61 FLANGE 135° SWEPT BEND62614BSP TAPER MALE SWIVEL6315BSP TAPER MALE 6416NPTF MALE6517METRIC MALE (STUD END)6618JIC MALE6719UNO MALE SWIVEL67420UNO MALE 67521POCLAIN FLANGE6822SAE CODE 62 FLANGE STRAIGHT69225CAT XT5 FLANGE STRAIGHT695226O&K SAE CODE 62 FLANGE STRAIGHT7023SAE CODE 61 FLANGE STRAIGHT71236O&K SAE CODE 61 FLANGE STRAIGHT7224BSPT MALE SWIVEL 90°7325BSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT7426BSPT MALE 90° COMPACT7527SAE SWIVEL NUT FEMALE 90° COMPACT7628JIC MALE SWIVEL 90° COMPACT7729JIC SWIVEL NUT FEMALE 90° COMPACT7830WATERBLAST SWIVEL NUT FEMALE7931DIN METRIC 60° CONE MALE STRAIGHT 8032UNO MALE SWIVEL 90° COMPACT8133JIC MALE 90° COMPACT8234JIS (KOMATSU) METRIC MALE8335JIS 30° FLARE (MITSUBISHI) MALE8436BSP TAPER MALE 45°8537SAE SWIVEL NUT FEMALE 45° SWEPT BEND8638BANJO8739POCLAIN FLANGE8839NPOCLAIN FLANGE 90°8939FPOCLAIN FLANGE 45°9040ORFS MALE91S40NORFS MALE 90° SWEPT BEND9241SAE SWIVEL NUT FEMALE 90° SWEPT BEND9342SAE INVERTED FLARE MALE 45° SWEPT BEND9443SAE INVERTED FLARE MALE 90 SWEPT BEND9544KOBELCO METRIC MALE9645SAE CODE 61 FLANGE 30° SWEPT BEND97DESCRIPTIONBSPP SWIVEL NUT FEMALE 90° SWEPT BENDORFS SWIVEL NUT FEMALE 90° SWEPT BENDMETRIC ISO/GAZ SWIVEL NUT FEMALE 90° SWEPT BENDSAE CODE 62 FLANGE 60° SWEPT BENDCAT XT5 FLANGE 60° SWEPT BENDJIC SWIVEL NUT FEMALE 90° SWEPT BENDORFS SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDBSPP SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDJIC SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDSAE CODE 61 FLANGE 90° SWEPT BENDBSPP SWIVEL NUT FEMALE 45° SWEPT BENDSAE CODE 62 FLANGE 90° SWEPT BENDCAT XT5 FLANGE 90° SWEPT BENDO&K SAE CODE 62 FLANGE 90° SWEPT BENDSAE CODE 62 FLANGE 45° SWEPT BENDCAT XT5 FLANGE 45° SWEPT BENDO&K SAE CODE 62 FLANGE 45° SWEPT BENDORFS SWIVEL NUT FEMALE 45° SWEPT BENDJIC SWIVEL NUT FEMALE 45° SWEPT BENDMINI-CHECK TEST POINT METRIC FEMALE/SPIGOTSAE CODE 61 FLANGE 60° SWEPT BENDSAE CODE 61 FLANGE 22.5° SWEPT BENDSAE CODE 62 FLANGE 22.5° SWEPT BENDCAT XT5 FLANGE 22.5° SWEPT BENDSAE CODE 61 FLANGE 45° SWEPT BENDSAE CODE 61 FLANGE 67.5° SWEPT BENDCAT XT5 FLANGE 67.5° SWEPT BENDJIS ( KOMATSU ) METRIC SWIVEL NUT FEMALEJIS ( KOMATSU ) FLANGE STRAIGHTJIS ( KOMATSU ) FLANGE 90° SWEPT BENDJIS ( KOMATSU ) FLANGE 45° SWEPT BENDFRENCH GAZ METRIC SWIVEL NUT FEMALEJIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALEDIN METRIC 60° CONE SWIVEL NUT FEMALEMETRIC GLOBESEAL SWIVEL NUT FEMALEHEAVY DIN METRIC MALEHEAVY DIN METRIC SWIVEL NUT FEMALELIGHT DIN METRIC MALELIGHT DIN METRIC SWIVEL NUT FEMALEMETRIC STANDPIPEHEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BENDHEAVY DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BENDHEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACTLIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BENDLIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BENDLIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACTJIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 90° SWEPT BENDHOSE JOINERJIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEM. 90° SWEPT BENDIMPERIAL STANDPIPEMETRIC 90° STANDPIPE SAE IMPERIAL TUBE CONNECTORDIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT BENDLIFESAVERWEO (CEJN) STRAIGHT STANDPIPE METRIC 45 FLARE BULKHEADOCHINESE FLAT FACE STRAIGHT FEMALE456O&K SAE CODE 61 FLANGE 30° SWEPT BEND46SAE CODE 62 FLANGE 30° SWEPT BEND465CAT XT5 FLANGE 30° SWEPT BEND466O&K SAE CODE 62 FLANGE 30° SWEPT BEND47FRENCH GAZ METRIC MALE 48JIS ( KOMATSU ) METRIC MALESUFFIX CODES FOR SERIES CODES49STAPLELOCK FEMALE 50STAPLELOCK MALENNINETY DEGREE e.g. S40NFFORTY FIVE DEGREE e.g. S40FS SWIVEL MALE e.g. SI8SKCOMPACT BLOCK 45° e.g. S64K, S60KCCYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01CHHEXAGONAL BAR TAIL STYLE e.g. S05HXEXTENDED DROP LENGTH IN MM e.g S615-1616-X132GS MGATESGLOBAL SPIRAL MAXIMUM NON-SKIVEe.g.GSM01-3232SUFFIX CODES FOR PART NUMBERSOur product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice109131GSGATES GLOBAL SPIRAL NON-SKIVE e.g. GS01-2020PREFIX CODES FOR SERIES

210PRODUCT CATALOGUE 20216 - 5ASSEMBLY INSTRUCTIONSINFORMATION - FIELD ATTACHABLES05Non-Skive Field Attachable CouplingsEnsure hose is cut square, with minimal end “ aring”. �Screw ferrule body onto hose in an anti-clockwise direction until hose is 3 to 5mm clear of inside body.Lightly lubricate the tailpiece and the female thread of the ferruke body, then screw the tailpiece into the ferrule body in a clockwise direction until the hex on the tailpiece abuts the ferrule body.Please refer to training manual for more detailed assembly instructions.5JICORFBSPBSJICBSPJICORFwww.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCwww.hydraASSEMBLY INSTRUCTIONSINFORMATION - FIELD ATTACHABLESNon-Skive Field Attachable CouplingsEnsure hose is cut square, with minimal end “ aring”. �Screw ferrule body onto hose in an anti-clockwise direction until hose is 3 to 5mm clearof inside body.Lightly lubricate the tailpiece and the female thread of the ferru e body, then screw the ltailpiece into the ferrule body in a clockwisedirection until the hex on the tailpiece abuts the ferrule body.Please refer to training manual for more detailed assembly instructions.5JICORFBSPBSJICBSPJICORFwww.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCwww.hydraOur product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

211PRODUCT CATALOGUE 2021FIELD ATTACHABLE HOSETAIL INDEX055BSP ParallelCNPTFSSAELifesaverR15 Page 1R05Page 8R58 Page 12R64 Page 13R03 Page 14R01Page 2R18 Page 9R02Page 3R25Page 4R51 Page 5R29 Page 10R60 Page 6R55 Page 11P TaperSPT MALE STRAIGHTBSPP FEMALE STRAIGHTWITH BACK HEXJIC FEMALE SWEPT 90EXTENDED LEGC FEMALE STRAIGHT WITH BACK HEXJIC MALE STRAIGHTJIC FEMALE COMPACT 90JIC FEMALE SWEPT 90PP FEMALE SWEPT 90BSPP FEMALE SWEPT 45C FEMALE SWEPT 45BSPP FEMALE FLAT-FACE STRAIGHT WITH BACK HEXBSPP FEMALE COMPACT 90R13 Page 15R52 Page 16SAE FEMALE STRAIGHTWITH BACK HEXFS FEMALE STRAIGHTWITH BACK HEXORFS FEMALE SWEPT 90R16 Page 7NPTF MALE STRAIGHTR96 Page 17SOCKET WELD STRAIGHTaulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCFIELD ATTACHABLE HOSETAIL INDEX055BSP ParallelCNPTFSSAELifesaverR15 Page 1R05Page 8R58 Page 12R64 Page 13R03 Page 14R01Page 2R18 Page 9R02Page 3R25Page 4R51 Page 5R29 Page 10R60 Page 6R55 Page 11P TaperSPT MALE STRAIGHTBSPP FEMALE STRAIGHTWITH BACK HEXJIC FEMALE SWEPT 90EXTENDED LEGC FEMALE STRAIGHT WITH BACK HEXJIC MALE STRAIGHTJIC FEMALE COMPACT 90JIC FEMALE SWEPT 90PP FEMALE SWEPT 90BSPP FEMALE SWEPT 45C FEMALE SWEPT 45BSPP FEMALE FLAT-FACE STRAIGHT WITH BACK HEXBSPP FEMALE COMPACT 90R13 Page 15R52 Page 16SAE FEMALE STRAIGHTWITH BACK HEXFS FEMALE STRAIGHTWITH BACK HEXORFS FEMALE SWEPT 90R16 Page 7NPTF MALE STRAIGHTR96 Page 17SOCKET WELD STRAIGHTaulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoC6-6FIELD ATTACHABLE HOSETAILS INDEXBSPBSPT MALE STRAIGHTF15Page 6 - 8BSP FEMALE STRAIGHTF01Page 6 - 8BSP FEMALE 45° ELBOWF60Page 6 - 9BSP FEMALE 90° ELBOWF25Page 6 - 9BSP FEMALE 90° ELBOWF51Page 6 - 10JICJIC MALE STRAIGHTF18Page 6 - 10JIC FEMALE STRAIGHTF05Page 6 - 11JIC FEMALE 45° ELBOWF64Page 6 - 11JIC FEMALE 90° ELBOWF29Page 6 - 12JIC FEMALE 90° ELBOWF55Page 6 - 12

212PRODUCT CATALOGUE 20216-7FIELD ATTACHABLE HOSETAILS INDEXBRAZE SOCKETIMPERIAL BRAZESOCKETF96Page 6 - 13LPG HOSE FITTINGSNPT MALEA14-1NPTPage 6 - 13SAE FEMALE STRAIGHTA380-1Page 6 - 13SAE FEMALE SWEPT 90°A380-9Page 6 - 14

213PRODUCT CATALOGUE 20216-8FIELD ATTACHABLE HOSETAILS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.BSPF15BSPT MALE STRAIGHTBSP TAPERED MALE STRAIGHTPart NumberBSPT MaleThread (T)Hose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)C (mm)F15-04041/4-191/46.4041620F15-06043/8-191/46.4041923F15-06063/8-193/89.5061923F15-08061/2-143/89.5062227F15-08081/2-141/212.7082227F15-10105/8-145/815.9102527F15-12123/4-143/419122932F15-16161-11125.4163536BSPF01BSP FEMALE STRAIGHTBSP 60° CONE FEMALE SWIVEL NUT STRAIGHTPart NumberBSPP FemaleThread (T)Hose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)H2 (mm)C (mm)F01-04041/4-191/46.404191617F01-06043/8-191/46.404221919F01-06063/8-193/89.506221919F01-08061/2-143/89.506272223F01-08081/2-141/212.708272223F01-10105/8-145/815.910302524F01-12123/4-143/41912323229F01-16161-11125.416383830

214PRODUCT CATALOGUE 20216-9FIELD ATTACHABLE HOSETAILS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.BSPF60BSP FEMALE 45° ELBOWBSP 60° CONE FEMALE SWIVEL NUT 45° ELBOWPart NumberBSPP FemaleThread (T)Hose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)L (mm)C (mm)F60-04041/4-191/46.404192239F60-06063/8-193/89.506222441F60-08081/2-141/212.708272850F60-12123/4-143/41912323061F60-16161-11125.416383774BSPF25BSP FEMALE 90° ELBOWBSP 60° CONE FEMALE SWIVEL NUT 90° ELBOWCOMPACTPart NumberBSPP FemaleThread (T)Hose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)L (mm)C (mm)F25-04041/4-191/46.404192011F25-06063/8-193/89.506222715F25-08081/2-141/212.708273019F25-12123/4-143/41912323421F25-16161-11125.416384228

215PRODUCT CATALOGUE 20216-10FIELD ATTACHABLE HOSETAILS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.BSPF51BSP FEMALE 90° ELBOWBSP 60° CONE FEMALE SWIVEL NUT 90° ELBOWPart NumberBSPP FemaleThread (T)Hose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)L (mm)C (mm)F51-04041/4-191/46.404193223F51-06063/8-193/89.506224030F51-08061/2-143/89.506274030F51-08081/2-141/212.708274636F51-12123/4-143/41912325547F51-16161-11125.416387158JICF18JIC MALE STRAIGHTJIC MALE 37° CONEPart NumberJIC THREADHose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)C (mm)F18-07047/16-201/46.4041620.5F18-09049/16-181/46.4041620.5F18-09069/16-183/89.5061922.5F18-12063/4-163/89.5062224.8F18-12083/4-161/212.7082224.8F18-14087/8-141/212.7082527.5F18-14107/8-145/815.9102527.5F18-17121.1/16-123/419122831.9F18-21161.5/16-12125.4163524

216PRODUCT CATALOGUE 20216-11FIELD ATTACHABLE HOSETAILS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.JICF05JIC FEMALE STRAIGHTJIC 37° FLARE FEMALE SWIVEL NUT STRAIGHT BACKHEXPart NumberJIC THREADHose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)H2 (mm)C (mm)F05-07047/16-201/46.404151413F05-09049/16-181/46.404191717F05-09069/16-183/89.506191717F05-12063/4-163/89.506241918F05-12083/4-161/212.708242218F05-14087/8-141/212.708272219F05-14107/8-145/815.910272519F05-17121.1/16-123/41912323024F05-21161.5/16-12125.416383827JICF64JIC FEMALE 45° ELBOWJIC 37° FLARE FEMALE SWIVEL NUT 45° ELBOWPart NumberJIC THREADHose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)L (mm)C (mm)F64-07047/16-201/46.404151733F64-09049/16-181/46.404191934F64-09069/16-183/89.506192141F64-12063/4-163/89.506242141F64-12083/4-161/212.708242347F64-14087/8-141/212.708272347F64-14107/8-145/815.910272549F64-17121.1/16-123/41912322958F64-21161 5/16-1211912273268

217PRODUCT CATALOGUE 20216-12FIELD ATTACHABLE HOSETAILS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.JICF29JIC FEMALE 90° ELBOWJIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOWCOMPACTPart NumberJIC THREADHose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)L (mm)C (mm)F29-07047/16-201/46.404151912F29-09049/16-181/46.404192112F29-09069/16-183/89.506192616F29-12063/4-163/89.506242717F29-12083/4-161/212.708242919F29-14087/8-141/212.708273019JICF55JIC FEMALE 90° ELBOWJIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOWPart NumberJIC THREADHose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)L (mm)C (mm)F55-07047/16-201/46.404152723F55-09049/16-181/46.404192923F55-09069/16-183/89.506193430F55-12063/4-163/89.506243530F55-12083/4-161/212.708243936F55-14087/8-141/212.708274536F55-14107/8-145/815.910275042F55-17121.1/16-123/41912325547F55-21161.5/16-12125.416416858

218PRODUCT CATALOGUE 20216-13FIELD ATTACHABLE HOSETAILS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.BRAZE SOCKETF96IMPERIAL BRAZE SOCKETIMPERIAL TUBE (LIFESAVER) BRAZE SOCKET STRAIGHTPart NumberSocket I.D (in)Hose I.D (in)Hose I.D (mm)Dash sizeH1 (mm)C (mm)F96-04041/41/46.404169F96-06063/83/89.5061912F96-08081/21/212.7082213F96-12123/43/419122915F96-16161125.4163519LPG HOSE FITTINGSA14-1NPTNPT MALENPT MALE HOSE TAIL TO SUIT 5LPG GAS HOSEPart NumberNPTF Male Thread(T)SuitsHex (1)Hex (2)Overall Length -mmA14-1NPT1/4-185LPG15.820.651.6LPG HOSE FITTINGSA380-1SAE FEMALE STRAIGHTSAE FEMALE HOSE TAIL TO SUIT 5LPG HOSEPart NumberSAE FemaleThread (T)SuitsHex (1)Hex (2)Overall Length -mmA380-15/8 - 185LPG1920.655

219PRODUCT CATALOGUE 20216-14FIELD ATTACHABLE HOSETAILS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.LPG HOSE FITTINGSA380-9SAE FEMALE SWEPT 90°SAE FEMALE SWEPT 90° TO SUIT 5LPG HOSEPart NumberSAE FemaleThread (T)SuitsHex (1)Hex (2)Overall Length -mmDrop LengthA380-905/8 - 185LPG1920.663.537.8

14PRODUCT CATALOGUE 2019FIELD ATTACHABLE FERRULESSECTION 7

7 - 1www.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCwww.hydraASGENERAL INFORMATIONINFORMATION - FIELD ATTACHABLESNonEns“ arÀScreclocof inLighthretailpdirecferruPleaThe eld attachable ferrules listed in this section are speci cally designed for use with SAE 100R1AT ¿¿and SAE100R2AT hose and the eld attachable ferrules listed in section ve of this catalogue. Use ¿¿of component combinations other than those speci ed may result in reduced service life or premature ¿failure of the hose assembly. In such cases no warranty will apply.Hydraulink eld attachable ferrules are of a proprietary design, and have all been comprehensively ¿tested within the performance parameters of the relevant hose types. To obtain maximum perfor-mance from hose assemblies, eld attachable ferrules must be assembled as per Hydraulink’s follow-¿ing assembly instructions.All dimensions shown are nominal, and subject to change due to ongoing product development. For critical applications, please contact Hydraulink to con rm dimensions.¿Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci -¿cation of any product listed in this catalogue.606 fa ferrules.indd 238-239Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice221PRODUCT CATALOGUE 2020

222PRODUCT CATALOGUE 20217 - 21002SROTwww.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCASSEMBLY INSTRUCTIONSINFORMATION - FIELD ATTACHABLES06Non-Skive Field Attachable CouplingsEnsure hose is cut square, with minimal end “ aring”. �Screw ferrule body onto hose in an anti-clockwise direction until hose is 3 to 5mm clear of inside body.Lightly lubricate the tailpiece and the female thread of the ferruke body, then screw the tailpiece into the ferrule body in a clockwise direction until the hex on the tailpiece abuts the ferrule body.Please refer to training manual for more detailed assembly instructions.1ATse ature ly low-For i -�624/06/10 3:11 PM1002SROTwww.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCASSEMBLY INSTRUCTIONSINFORMATION - FIELD ATTACHABLESNon-Skive Field Attachable CouplingsEnsure hose is cut square, with minimal end “ aring”. �Screw ferrule body onto hose in an anti-clockwise direction until hose is 3 to 5mm clearof inside body.Lightly lubricate the tailpiece and the female thread of the ferru e body, then screw the ltailpiece into the ferrule body in a clockwisedirection until the hex on the tailpiece abuts the ferrule body.Please refer to training manual for more detailed assembly instructions.1ATse ature ly low-For i -�624/06/10 3:11 PMOur product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

223PRODUCT CATALOGUE 20217-3FIELD ATTACHABLE FERRULES INDEXFIELD ATTACHABLE FERRULEFIELD ATTACHABLEFERRULEFN1Page 7 - 4FIELD ATTACHABLEFERRULEFN2Page 7 - 4

224PRODUCT CATALOGUE 20217-4FIELD ATTACHABLE FERRULES† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.FIELD ATTACHABLE FERRULEFN1FIELD ATTACHABLE FERRULENON-SKIVE FIELD ATTACHABLE FERRULE FOR H1T & G1HOSEPart NumberHose I.D (in)Hose I.D (mm)Dash sizeL (mm)H (mm)FN1-041/46.5043819FN1-063/89.5064522FN1-081/212.7084925FN1-105/816.0105029FN1-123/419.0125932FN1-16125.4167041FIELD ATTACHABLE FERRULEFN2FIELD ATTACHABLE FERRULENON-SKIVE FIELD ATTACHABLE FERRULE FOR H2T & G2HOSEPart NumberHose I.D (in)Hose I.D (mm)Dash sizeL (mm)H (mm)FN2-041/46.5043819FN2-063/89.5064522FN2-081/212.7084925FN2-105/816.0105032FN2-123/419.0125932FN2-16125.4167045

15PRODUCT CATALOGUE 2019PUSH-ON COUPLINGSSECTION 8

226PRODUCT CATALOGUE 20218 - 1PAGENERAL INFORMATIONINFORMATION - PUSH-ON COUPLINGSTheber ModModModModThe Hydraulink range of hose couplings are available in three main series; Swage, Field Attachable (often referred to as reusable) and Push-on.The push-on series hosetail (also described as push-lock) is designed to be suitable for use with low pressure hose such as SAE 100R6 or equivalent (e.g. Gates LOLA or GTH hoses). Use of hoseclips or hose clamps to secure the hosetail is not recommended and will cause premature damage to the internal tube.Hydraulink thread forms and sealing methods are manufactured to the relevant international stan-dards where applicable. All dimensions shown are nominal, and subject to change due to ongoing product development. For critical applications, please contact Hydraulink to con rm dimensions.Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci -cation of any product listed in this catalogue.7Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

227PRODUCT CATALOGUE 2021ART NUMBERING SYSTEM – STEEL PUSH-ON COUPLINGSINFORMATION - PUSH-ON COUPLINGSe Hydraulink part numbering system is a concise product description in coded form. The part num- consists of four modules as follows:dule 1. Pre x letter; Module 1.  denotes coupling type.S = Swage R = Field Attachable (Reusable) P = Push-on R5 = Field Attachable (Reusable) to suit SAE 100R5 hose SU = Suction tail.dule 2. Series Numbers;Module 2. denotes the thread form or sealing method (coupling end) and thecon guration of the hosetail. E.g.; series code #51 denotes a BSPP swivel nut female in a swept 90° con guration, series code #29 denotes a JIC female swivel nut in a compact 90° con guration.Please refer to the following “Series Codes and Descriptions” for further informationregarding coupling ends and con gurations.dule 3. Coupling end size; Module 3. denotes the size of the thread form or sealing method of thehosetail. Sizes are expressed as follows;English/American threads; expressed in 1/16th inch increments denoting the key diameter. For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”.Metric threads; expressed in millimetres with pre x M, denoting the key diameter. For example; M10 = 10mm O.D. thread.Flanges; express the nominal size of the ange head. Nominal sizing refers to the maximuminternal bore. For example a 12 ange head would have a maximum internal bore of 12/16 = 3/4”.Please refer technical section for further information regarding coupling ends, thread formsand sealing methods.dule 4. Hosetail outside diameter; Hosetail outside diameter; denotes both the nominal O.D. of the hosetail and the I.Dof the hose it would suit. Sizes are expressed in 1/16th inch increments.For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”.78 - 2PART NUMBERING SYSTEM – STEEL PUSH-ON COUPLINGSINFORMATION - PUSH-ON COUPLINGSThe Hydraulink part numbering system is a concise product description in coded form. The part num-ber consists of four modules as follows:Pre x letter; denotes coupling type.S = Swage F = Field Attachable (Reusable) P = Push-on R5 = Field Attachable (Reusable) to suit SAE 100R5 hose SU = Suction tail. Series Numbers; denotes the thread form or sealing method (coupling end) and thecon guration of the hosetail. E.g.; series code #51 denotes a BSPP swivel nut female in a swept 90° con guration,series code #29 denotes a JIC female swivel nut in a compact 90° con guration.Please refer to the following “Series Codes and Descriptions” for further informationregarding coupling ends and con gurations.Coupling end size; denotes the size of the thread form or sealing method of thehosetail. Sizes are expressed as follows;English/American threads; expressed in 1/16th inch increments denoting the key diameter. For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”.Metric threads; expressed in millimetres with pre x M, denoting the key diameter. For example; M10 = 10mm O.D. thread.Flanges; express the nominal size of the ange head. Nominal sizing refers to the maximum internal bore. For example a 12 ange head would have a maximum internal bore of 12/16 = 3/4”.Please refer technical section for further information regarding coupling ends, thread formsand sealing methods.Module 4. denotes both the nominal O.D. of the hosetail and the I.Dof the hose it would suit. Sizes are expressed in 1/16th inch increments.For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”.ble low lips he -g ci -7Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

228PRODUCT CATALOGUE 20218 - 3SEPART NUMBERING SYSTEM – EXAMPLESINFORMATION - PUSH-ON COUPLINGSCODE0102030405060708091011110121313R133135141516171819202122225226232362425262728293031323334353637383939N39F40S40N41424344454564646546647484950Part number: P05-1412Complete desription: 7/8” JIC swivel nut female x 3/4” hose tail, straight push-on coupling.Module 3. Coupling end size“14” for 14/16ths = �/8”Module 4. Hosetail O.D.“12” for 12/16ths = 3/4”Module 1. Prefix letter“P” for push�onModule 2. Series code“05” for JIC swivel nutfemale, straight couplingP 05 - 14 12Part number: P60-0808Complete desription: 1/2” BSPP swivel nut female x 1/2” hose tail, swept 45° push-on coupling.Module 3. Coupling end size“08” for 8/16ths = 1/2”Module 4. Hosetail O.D.“08” for 8/16ths = 1/2”Module 1. Prefix letter“P” for push�onModule 2. Series code“60” for BSPP swivel nutfemale, swept 45° couplingP �0 - 0� 0�7Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

229PRODUCT CATALOGUE 2021ERIES CODES AND DESCRIPTIONS - HOSETAILSINFORMATION - PUSH-ON COUPLINGS0�E DESCRIPTIONCODE DESCRIPTIONBSP PARALLEL SWIVEL NUT FEMALE51BSPP SWIVEL NUT FEMALE 90° SWEPT BENDBSP PARALLEL SWIVEL NUT FEMALE FLATFACEARALLEL SWIVEL NUT FEMALE FLATFACE52ORFS SWIVEL NUT FEMALE 90° SWEPT BENDSAE SWIVEL NUT FEMALE53METRIC ISO/GAZ SWIVEL NUT FEMALE 90° SWEPT BENDJIC SOLID (FIXED) FEMALE54SAE CODE 62 FLANGE 60° SWEPT BEND SAE CODE 62 FLANGE 60° SWEPT BENDJIC SWIVEL NUT FEMALE545CAT XT5 FLANGE 60° SWEPT BEND 545BSPT SOLID (FIXED) FEMALE55JIC SWIVEL NUT FEMALE 90° SWEPT BEND JIC SWIVEL NUT FEMALE 90° SWEPT BENDNPSM SWIVEL NUT FEMALE56ORFS SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDBSP PARALLEL SOLID (FIXED) FEMALE57BSPP SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDSAE MALE58JIC SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDSAE INVERTED FLARE MALE59SAE CODE 61 FLANGE 90° SWEPT BEND SAE CODE 61 FLANGE 90° SWEPT BENDNPTF SOLID (FIXED) FEMALE60BSPP SWIVEL NUT FEMALE 45° SWEPT BENDSAE CODE 61 FLANGE 110° SWEPT BEND SAE CODE 61 FLANGE 110° SWEPT BEND61SAE CODE 62 FLANGE 90° SWEPT BEND SAE CODE 62 FLANGE 90° SWEPT BENDBSP PARALLEL MALE615CAT XT5 FLANGE 90° SWEPT BEND 615ORFS SWIVEL NUT FEMALE616O&K SAE CODE 62 FLANGE 90° SWEPT BENDORFS SWIVEL NUT FEMALE, SHORT STEM ORFS SWIVEL NUT FEMALE, SHORT STEM62SAE CODE 62 FLANGE 45° SWEPT BEND SAE CODE 62 FLANGE 45° SWEPT BENDORFS SWIVEL NUT FEMALE 30° SWEPT BEND625CAT XT5 FLANGE 45° SWEPT BEND 625SAE CODE 61 FLANGE 135° SWEPT BEND SAE CODE 61 FLANGE 135° SWEPT BEND626O&K SAE CODE 62 FLANGE 45° SWEPT BENDBSP TAPER MALE SWIVEL63ORFS SWIVEL NUT FEMALE 45° SWEPT BENDBSP TAPER MALE 64JIC SWIVEL NUT FEMALE 45° SWEPT BEND JIC SWIVEL NUT FEMALE 45° SWEPT BENDNPTF MALE65MINI-CHECK TEST POINT METRIC FEMALE/SPIGOTMETRIC MALE (STUD END)66SAE CODE 61 FLANGE 60° SWEPT BEND SAE CODE 61 FLANGE 60° SWEPT BENDJIC MALE67SAE CODE 61 FLANGE 22.5° SWEPT BENDSAE CODE 61 FLANGE 22.5° SWEPT BENDUNO MALE SWIVEL674SAE CODE 62 FLANGE 22.5° SWEPT BENDSAE CODE 62 FLANGE 22.5° SWEPT BENDUNO MALE 675CAT XT5 FLANGE 22.5° SWEPT BENDPOCLAIN FLANGE68SAE CODE 61 FLANGE 45° SWEPT BEND SAE CODE 61 FLANGE 45° SWEPT BENDSAE CODE 62 FLANGE STRAIGHT 2269SAE CODE 61 FLANGE 67.5° SWEPT BENDSAE CODE 61 FLANGE 67.5° SWEPT BENDCAT XT5 FLANGE STRAIGHT695CAT XT5 FLANGE 67.5° SWEPT BENDO&K SAE CODE 62 FLANGE STRAIGHT70JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALESAE CODE 61 FLANGE STRAIGHT 2371JIS ( KOMATSU ) FLANGE STRAIGHT 71O&K SAE CODE 61 FLANGE STRAIGHT72JIS ( KOMATSU ) FLANGE 90° SWEPT BEND JIS ( KOMATSU ) FLANGE 90° SWEPT BENDBSPT MALE SWIVEL 90°73JIS ( KOMATSU ) FLANGE 45° SWEPT BEND JIS ( KOMATSU ) FLANGE 45° SWEPT BENDBSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT74FRENCH GAZ METRIC SWIVEL NUT FEMALEBSPT MALE 90° COMPACT75JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALESAE SWIVEL NUT FEMALE 90° COMPACT SAE SWIVEL NUT FEMALE 90° COMPACT76DIN METRIC 60° CONE SWIVEL NUT FEMALEJIC MALE SWIVEL 90° COMPACT 2877METRIC GLOBESEAL SWIVEL NUT FEMALE METRIC GLOBESEAL SWIVEL NUT FEMALEJIC SWIVEL NUT FEMALE 90° COMPACT78HEAVY DIN METRIC MALEWATERBLAST SWIVEL NUT FEMALE 3079HEAVY DIN METRIC SWIVEL NUT FEMALE HEAVY DIN METRIC SWIVEL NUT FEMALEDIN METRIC 60° CONE MALE STRAIGHT80LIGHT DIN METRIC MALEUNO MALE SWIVEL 90° COMPACT 3281LIGHT DIN METRIC SWIVEL NUT FEMALE LIGHT DIN METRIC SWIVEL NUT FEMALEJIC MALE 90° COMPACT82METRIC STANDPIPEJIS (KOMATSU) METRIC MALE83HEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BENDJIS 30° FLARE (MITSUBISHI) MALE3584HEAVY DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BENDBSP TAPER MALE 45°85HEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACTSAE SWIVEL NUT FEMALE 45° SWEPT BEND86LIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BENDBANJO87LIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BENDPOCLAIN FLANGE88LIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACTPOCLAIN FLANGE 90°89JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 90° SWEPT BENDPOCLAIN FLANGE 45°90HOSE JOINERORFS MALE91JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEM. 90° SWEPT BENDNORFS MALE 90° SWEPT BEND92IMPERIAL STANDPIPESAE SWIVEL NUT FEMALE 90° SWEPT BEND93METRIC 90° STANDPIPE SAE INVERTED FLARE MALE 45° SWEPT BEND94SAE IMPERIAL TUBE CONNECTOR94SAE INVERTED FLARE MALE 90 SWEPT BEND95DIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT BENDKOBELCO METRIC MALE96LIFESAVERSAE CODE 61 FLANGE 30° SWEPT BEND SAE CODE 61 FLANGE 30° SWEPT BEND97WEO (CEJN) STRAIGHT STANDPIPE 97O&K SAE CODE 61 FLANGE 30° SWEPT BENDSAE CODE 62 FLANGE 30° SWEPT BEND SAE CODE 62 FLANGE 30° SWEPT BENDCAT XT5 FLANGE 30° SWEPT BEND 465O&K SAE CODE 62 FLANGE 30° SWEPT BENDFRENCH GAZ METRIC MALE JIS ( KOMATSU ) METRIC MALESUFFIX CODES FOR SERIES CODESSTAPLELOCK FEMALE STAPLELOCK MALENNINETY DEGREE e.g. S40NFFORTY FIVE DEGREE e.g. S40FS SWIVEL MALE e.g. SI8SKCOMPACT BLOCK 45° e.g. S64K, S60K COMPACT BLOCK 45° e.g. S64K, S60KCCYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01CHHEXAGONAL BAR TAIL STYLE e.g. S05H HEXAGONAL BAR TAIL STYLE e.g. S05HGSGATES GLOBAL SPIRAL NON-SKIVE e.g. S66-2020GSPCMGATES SPIRAL SKIVE TYPE e.g. SMS15-24PCMSUFFIX CODES FOR PART NUMBERS78 - 41002SROTwww.hydraulink.com1002SROTCENNOC D IULFK N I LUARDYH© t hg i r ypoCSERIES CODES AND DESCRIPTIONS - HOSETAILSINFORMATIONCODEDESCRIPTIONCODE01BSP PARALLEL SWIVEL NUT FEMALE5102BSP P5203SAE SWIVEL NUT FEMALE5304JIC SOLID (FIXED) FEMALE5405JIC SWIVEL NUT FEMALE06BSPT SOLID (FIXED) FEMALE5507NPSM SWIVEL NUT FEMALE5608BSP PARALLEL SOLID (FIXED) FEMALE5709SAE MALE5810SAE INVERTED FLARE MALE5911NPTF SOLID (FIXED) FEMALE601106112BSP PARALLEL MALE13ORFS SWIVEL NUT FEMALE61613R62133ORFS SWIVEL NUT FEMALE 30° SWEPT BEND13562614BSP TAPER MALE SWIVEL6315BSP TAPER MALE 6416NPTF MALE6517METRIC MALE (STUD END)6618JIC MALE6719UNO MALE SWIVEL67420UNO MALE 67521POCLAIN FLANGE68SAE CODE 62 FLANGE STRAIGHT69225CAT XT5 FLANGE STRAIGHT695226O&K SAE CODE 62 FLANGE STRAIGHT70SAE CODE 61 FLANGE STRAIGHT236O&K SAE CODE 61 FLANGE STRAIGHT7224BSPT MALE SWIVEL 90°7325BSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT7426BSPT MALE 90° COMPACT752776JIC MALE SWIVEL 90° COMPACT7729JIC SWIVEL NUT FEMALE 90° COMPACT78WATERBLAST SWIVEL NUT FEMALE7931DIN METRIC 60° CONE MALE STRAIGHT 80UNO MALE SWIVEL 90° COMPACT8133JIC MALE 90° COMPACT8234JIS (KOMATSU) METRIC MALE83JIS 30° FLARE (MITSUBISHI) MALE8436BSP TAPER MALE 45°8537SAE SWIVEL NUT FEMALE 45° SWEPT BEND8638BANJO8739POCLAIN FLANGE8839NPOCLAIN FLANGE 90°8939FPOCLAIN FLANGE 45°9040ORFS MALE91S40NORFS MALE 90° SWEPT BEND9241SAE SWIVEL NUT FEMALE 90° SWEPT BEND9342SAE INVERTED FLARE MALE 45° SWEPT BEND43SAE INVERTED FLARE MALE 90 SWEPT BEND9544KOBELCO METRIC MALE9645DESCRIPTIONBSPP SWIVEL NUT FEMALE 90° SWEPT BENDORFS SWIVEL NUT FEMALE 90° SWEPT BENDMETRIC ISO/GAZ SWIVEL NUT FEMALE 90° SWEPT BENDCAT XT5 FLANGE 60° SWEPT BENDORFS SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDBSPP SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDJIC SWIVEL NUT FEMALE 90° LONG LEG SWEPT BENDBSPP SWIVEL NUT FEMALE 45° SWEPT BENDCAT XT5 FLANGE 90° SWEPT BENDO&K SAE CODE 62 FLANGE 90° SWEPT BENDCAT XT5 FLANGE 45° SWEPT BENDO&K SAE CODE 62 FLANGE 45° SWEPT BENDORFS SWIVEL NUT FEMALE 45° SWEPT BENDMINI-CHECK TEST POINT METRIC FEMALE/SPIGOTCAT XT5 FLANGE 22.5° SWEPT BENDCAT XT5 FLANGE 67.5° SWEPT BENDJIS ( KOMATSU ) METRIC SWIVEL NUT FEMALEJIS ( KOMATSU ) FLANGE STRAIGHTFRENCH GAZ METRIC SWIVEL NUT FEMALEJIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALEDIN METRIC 60° CONE SWIVEL NUT FEMALEHEAVY DIN METRIC MALELIGHT DIN METRIC MALEMETRIC STANDPIPEHEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BENDHEAVY DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BENDHEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACTLIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BENDLIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BENDLIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACTJIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 90° SWEPT BENDHOSE JOINERJIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEM. 90° SWEPT BENDIMPERIAL STANDPIPEMETRIC 90° STANDPIPE SAE IMPERIAL TUBE CONNECTORDIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT BENDLIFESAVERWEO (CEJN) STRAIGHT STANDPIPE METRIC 45 FLARE BULKHEADOCHINESE FLAT FACE STRAIGHT FEMALE456O&K SAE CODE 61 FLANGE 30° SWEPT BEND46CAT XT5 FLANGE 30° SWEPT BEND466O&K SAE CODE 62 FLANGE 30° SWEPT BEND47FRENCH GAZ METRIC MALE 48JIS ( KOMATSU ) METRIC MALESUFFIX CODES FOR SERIES CODES49STAPLELOCK FEMALE 50STAPLELOCK MALENNINETY DEGREE e.g. S40NFFORTY FIVE DEGREE e.g. S40FS SWIVEL MALE e.g. SI8SKCCYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01CHXEXTENDED DROP LENGTH IN MM e.g S615-1616-X132GS MGATESGLOBAL SPIRAL MAXIMUM NON-SKIVEe.g.GSM01-3232SUFFIX CODES FOR PART NUMBERSOur product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice109131GSGATES GLOBAL SPIRAL NON-SKIVE e.g. GS01-2020PREFIX CODES FOR SERIES

230PRODUCT CATALOGUE 20218-5PUSH-ON COUPLINGS INDEXBSP TAPERBSPT MALE STRAIGHTP15Page 8 - 7BSP PARALLELBSP FEMALE STRAIGHTP01Page 8 - 7BSP FEMALE 90° ELBOWP25Page 8 - 8BSP FEMALE 90° ELBOWP51Page 8 - 8NPTNPTF MALE STRAIGHTP16Page 8 - 8JICJIC MALE STRAIGHTP18Page 8 - 9JIC FEMALE STRAIGHTP05Page 8 - 9JIC FEMALE 90° ELBOWP29Page 8 - 10JIC FEMALE 90° ELBOWP55Page 8 - 10

231PRODUCT CATALOGUE 20218-6PUSH-ON COUPLINGS INDEXSAESAE MALE STRAIGHTP09Page 8 - 11SAE FEMALE STRAIGHTP03Page 8 - 11HOSE JOINERHOSE JOINER STRAIGHTP90Page 8 - 11BRAZE SOCKETIMPERIAL BRAZESOCKETP96Page 8 - 12

232PRODUCT CATALOGUE 20218-7PUSH-ON COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.BSP TAPERP15BSPT MALE STRAIGHTBSP TAPERED MALE STRAIGHTPart NumberBSPT MaleThread (T)Hose I.D inchesHose I.D (mm)Dash sizeHex A/F (E)Cutoff - CP15-02041/8-281/46.4041618P15-04041/4-191/46.4041620P15-04061/4-193/89.5061623P15-06043/8-191/46.4041918P15-06063/8-193/89.5061921P15-06083/8-191/212.7081921P15-08061/2-143/89.5062227P15-08081/2-141/212.7082227P15-12123/4-143/419123232BSP PARALLELP01BSP FEMALE STRAIGHTBSP 60° CONE FEMALE SWIVEL NUT STRAIGHTPart NumberBSPP FemaleThread (T)Hose I.D inchesHose I.D (mm)Dash sizeHex A/F (E)Cutoff - CP01-02041/8-281/46.4041414P01-04041/4-191/46.4041914P01-04061/4-193/89.5061914P01-06043/8-191/46.4042216P01-06063/8-193/89.5062216P01-06083/8-191/212.7082217P01-08061/2-143/89.5062718P01-08081/2-141/212.7082719P01-08101/2-145/815.9102719P01-10105/8-145/815.9102818P01-12123/4-143/419123221

233PRODUCT CATALOGUE 20218-8PUSH-ON COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.BSP PARALLELP25BSP FEMALE 90° ELBOWBSP 60° CONE FEMALE SWIVEL NUT 90° ELBOWCOMPACTPart NumberBSPPFemaleThread (T)Hose I.DinchesHose I.D(mm)Dash sizeHex A/F (E)Hex A/F (E1)Drop (H)Cutoff - CP25-04041/4-191/46.40419142311P25-06063/8-193/89.50622192715P25-08081/2-141/212.70827223018P25-12123/4-143/4191232273421BSP PARALLELP51BSP FEMALE 90° ELBOWBSP 60° CONE FEMALE SWIVEL NUT 90° ELBOWPart NumberBSPP FemaleThread (T)Hose I.DinchesHose I.D (mm)Dash sizeHex A/F (E)Drop (H)Cutoff - CP51-04041/4-191/46.404193121P51-06063/8-193/89.506223726P51-08081/2-141/212.708274531P51-12123/4-143/41912325845NPTP16NPTF MALE STRAIGHTNPTF MALE 30° CONEPart NumberNPTF MaleThread (T)Hose I.D inchesHose I.D (mm)Dash sizeHex A/F (E)Cutoff - CP16-04041/4-181/46.4041620P16-06063/8-183/89.5061923P16-08081/2-141/212.7082227

234PRODUCT CATALOGUE 20218-9PUSH-ON COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.JICP18JIC MALE STRAIGHTJIC 37° FLARE MALE STRAIGHTPart NumberJIC Male Thread Hose I.D inches(T)Hose I.D (mm)Dash sizeHex A/F (H)Cutoff - CP18-07047/16-201/46.4041621P18-08041/2-201/46.4041621P18-09049/16-181/46.4041621P18-09069/16-183/89.5061621P18-12063/4-163/89.5062225P18-12083/4-161/212.7082225P18-14087/8-141/212.7082530P18-17121.1/16-123/419122934JICP05JIC FEMALE STRAIGHTJIC 37° FLARE FEMALE SWIVEL NUT STRAIGHTPart NumberJIC FemaleThread (T)Hose I.D inchesHose I.D (mm)Dash sizeHex A/F (E)Cutoff - CP05-07047/16 - 201/46.4041510P05-08041/2 - 201/46.4041712P05-09049/16-181/46.4041912P05-09069/16-183/89.5061912P05-12063/4-163/89.5062414P05-12083/4-161/212.7082414P05-14087/8-141/212.7082715P05-14107/8-145/815.9102715P05-17121.1/16-123/419123217

235PRODUCT CATALOGUE 20218-10PUSH-ON COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.JICP29JIC FEMALE 90° ELBOWJIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOWCOMPACTPart NumberJIC FemaleThread (T)Hose I.DinchesHose I.D(mm)Dash sizeHex A/F (E)Hex A/F (E1)Drop (H)Cutoff - CP29-07047/16-201/46.40415141914P29-08041/2-201/46.40416142114P29-09049/16-181/46.40419142114P29-09069/16-183/89.50619142115P29-12063/4-163/89.50624192720P29-12083/4-161/212.70824192719P29-14087/8-141/212.70827222819P29-17121.1/16-123/4191232273627JICP55JIC FEMALE 90° ELBOWJIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOWPart NumberJIC FemaleThread (T)Hose I.DinchesHose I.D (mm)Dash sizeHex A/F (E)Drop - HCutoff - CP55-07047/16-201/46.404152821P55-08041/2-201/46.404172821P55-09069/16-183/89.506193626P55-12083/4-161/212.708244231P55-14087/8-141/212.708274331P55-17121.1/16-123/41912325443

236PRODUCT CATALOGUE 20218-11PUSH-ON COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.SAEP09SAE MALE STRAIGHTSAE 45° FLARE MALE STRAIGHTPart NumberSAE MaleThread (T)Hose I.D inchesHose I.D (mm)Dash sizeHex A/F (E)Cutoff - CP09-10065/8 - 183/89.5061722SAEP03SAE FEMALE STRAIGHTSAE 45° FLARE FEMALE SWIVEL NUT STRAIGHTPart NumberSAE FemaleThread (T)Hose I.D inchesHose I.D (mm)Dash sizeHex A/F (E)Cutoff - CP03-10065/8 - 183/89.5061913P03-17101.1/16 - 145/815.9103217P03-17121.1/16 - 143/419123217HOSE JOINERP90HOSE JOINER STRAIGHTPart NumberHose I.D inchesHose I.D (mm)Dash sizeCutoff - CP90-04041/46.4045P90-06063/89.5065P90-08081/212.7086P90-10105/815.9105P90-12123/419125

237PRODUCT CATALOGUE 20218-12PUSH-ON COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.BRAZE SOCKETP96IMPERIAL BRAZE SOCKETIMPERIAL TUBE (LIFESAVER) BRAZE SOCKET STRAIGHTPart NumberSocket I.DinchesHose I.D(Inches)Hose I.D (mm)Dash sizeO.D mmCutoff - CP96-04041/41/46.404137P96-06063/83/89.506167P96-08081/21/212.708199P96-10105/85/815.9102510P96-12123/43/419122510

16PRODUCT CATALOGUE 2019R5 FIELD ATTACHABLESSECTION 9

9 - 1PAGENERAL INFORMATIONINFORMATION - R5 FIELD ATTACHABLESTheber consists of four modules as follows:bModule 1. MModule 2. MModule 3. MModule 4. MThe Hydraulink range of hose couplings are available in three main series; Swage, Field Attachable (often referred to as reusable) and Push-on.The R5 eld attachable series coupling is a specialised type of eld attachable, designed for use with � �� �Gates C5C, C5D and C5M hoses (SAE 100R5). The hosetail is supplied complete with ferrule to ensure compatibility of hosetail and ferrule.NOTE: Please contact Hydraulink for further details and availability of hose couplings to suit Gates C5E hose.Hydraulink thread forms and sealing methods are manufactured to the relevant international stan-dards where applicable. All dimensions shown are nominal, and subject to change due to ongoing product development. For critical applications, please contact Hydraulink to con rm dimensions.� �Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and speci - -� �cation of any product listed in this catalogue.88PGENERAL INFORMATIONINFORMATION - R5 FIELD ATTACHABLES08TThe Hydraulink range of hose couplings are available in three main series; Swage, Field Attachable (often referred to as reusable) and Push-on.The R5 eld attachable series coupling is a specialised type of eld attachable, designed for use with Gates C5C, C5D and C5M hoses (SAE 100R5). The hosetail is supplied complete with ferrule to ensure compatibility of hosetail and ferrule.NOTE: Please contact Hydraulink for further details and availability of hose couplings to suit Gates C5E hose.Hydraulink thread forms and sealing methods are manufactured to the relevant international stan-dards where applicable. All dimensions shown are nominal, and subject to change due to ongoing product development. For critical applications, please contact Hydraulink to con rm dimensions.Hydraulink Fluid Connectors Ltd. reserves the right to discontinue, or to alter the design and specication of any product listed in this catalogue.Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice239PRODUCT CATALOGUE 2020

240PRODUCT CATALOGUE 20219 - 2PART NUMBERING SYSTEM – R5 FIELD ATTACHABLE COUPLINGSINFORMATION - R5 FIELD ATTACHABLESThe Hydraulink part numbering system is a concise product description in coded form. The part num-ber consists of four modules as follows:Module 1. Pre x letter; denotes coupling type.S = Swage F = Field Attachable (Reusable) P = Push-on R5 = Field Attachable (Reusable) to suit SAE 100R5 hose SU = Suction tail.Module 2. Series Numbers; denotes the thread form or sealing method (coupling end) and thecon guration of the hosetail. �E.g.; series code #51 denotes a BSPP swivel nut female in a swept 90° con guration,�series code #29 denotes a JIC female swivel nut in a compact 90° con guration.�Please refer to the following “Series Codes and Descriptions” for further informationregarding coupling ends and con gurations.�Module 3. Coupling end size; denotes the size of the thread form or sealing method of thehosetail. Sizes are expressed as follows;English/American threads; expressed in 1/16th inch increments denoting the key diameter. For example; 08 = 8/16 = 1/2” and 19 = 19/16 = 1 3/16”.Metric threads; expressed in millimetres with pre x M, denoting the key diameter. �For example; M10 = 10mm O.D. thread.Flanges; express the nominal size of the ange head. Nominal sizing refers to the maximum internal bore. For example a 12 ange head would have a maximum internal bore of 12/16 = 3/4”.Please refer technical section for further information regarding coupling ends, thread formsand sealing methods.Module 4. Hosetail outside diameter; denotes both the nominal O.D. of the hosetail and the I.Dof the hose it would suit. Sizes are expressed in 1/16th inch increments.For example; 06 = 6/16 = 3/8” and 20 = 20/16 = 1 1/4”.ble with s -g i -�8Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

241PRODUCT CATALOGUE 20219 - 3SEPART NUMBERING SYSTEM – R5 FIELD ATTACHABLE COUPLINGSPART NUMBERING SYSTEM – R5 FIELD ATTACHABLE COUPLINGSINFORMATION - R5 FIELD ATTACHABLESINFORMATION - R5 FIELD ATTACHABLESCODE0102030405060708091011110121313R133135141516171819202122225226232362425262728293031323334353637383939N39F40S40N41424344454564646546647484950Part number: R503-1006Part number: R503-1006Complete desription:Complete desription: 5/8” SAE swivel nut 5/8” SAE swivel nut female x hose tail to suit 3/8” nominal bore SAE female x hose tail to suit 3/8” nominal bore SAE 100R5 hose (true bore 5/16”), straight eld 100R5 hose (true bore 5/16”), straight eld ¿attachable coupling.attachable coupling.Part number: R555-1208Part number: R555-1208Complete desription:Complete desription: 3/4” JIC swivel nut 3/4” JIC swivel nut female x hose tail to suit 1/2” nominal bore SAE female x hose tail to suit 1/2” nominal bore SAE 100R5 hose (true bore 13/32”), swept 90° eld 100R5 hose (true bore 13/32”), swept 90° eld ¿attachable coupling.attachable coupling.Module 3. Coupling end sizeModule 3. Coupling end size“10” for 10/16ths = 5/8”“10” for 10/16ths = 5/8”Module 4. Hosetail O.D.Module 4. Hosetail O.D.“06” for 6/16ths = 3/8”“06” for 6/16ths = 3/8”N.B. Size matches N.B. Size matches nominalnominalinternal diameter of hoseinternal diameter of hoseModule 1. Prefix letterModule 1. Prefix letter“R5” for field attachable to“R5” for field attachable tosuit SAE 100R5 hose suit SAE 100R5 hose Module 2. Series code“03” for SAE swivel nutfemale, straight couplingR5 03 -R5 03 10 0�10 0�Module 3. Coupling end sizeModule 3. Coupling end size“12” for 12/16ths = 3/4”“12” for 12/16ths = 3/4”Module 4. Hosetail O.D.Module 4. Hosetail O.D.“08” for 8/16ths = 1/2”“08” for 8/16ths = 1/2”N.B. Size matches N.B. Size matches nominalnominalinternal diameter of hoseinternal diameter of hoseModule 1. Prefix letterModule 1. Prefix letter“R5” for field attachable to“R5” for field attachable tosuit SAE 100R5 hose suit SAE 100R5 hose Module 2. Series code“55” for SAE swivel nutfemale, swept 90° couplingR5 55 -R5 55 12 0812 088 808¿¿Module 2. Series code“03” for SAE swivel nutfemale, straight coupling-Module 2. Series code“55” for SAE swivel nutfemale, swept 90° coupling-Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

242PRODUCT CATALOGUE 20219 - 4SERIES CODES AND DESCRIPTIONS - HOSETAILSINFORMATION - R5 FIELD ATTACHABLESGSCODEDESCRIPTIONCODEDESCRIPTION01BSP PARALLEL SWIVEL NUT FEMALE51BSPP SWIVEL NUT FEMALE 90° SWEPT BEND02BSP PARALLEL SWIVEL NUT FEMALE FLATFACE52ORFS SWIVEL NUT FEMALE 90° SWEPT BEND03SAE SWIVEL NUT FEMALE53METRIC ISO/GAZ SWIVEL NUT FEMALE 90° SWEPT BEND04JIC SOLID (FIXED) FEMALE54SAE CODE 62 FLANGE 60° SWEPT BEND05JIC SWIVEL NUT FEMALE545CAT XT5 FLANGE 60° SWEPT BEND06BSPT SOLID (FIXED) FEMALE55JIC SWIVEL NUT FEMALE 90° SWEPT BEND07NPSM SWIVEL NUT FEMALE56ORFS SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND08BSP PARALLEL SOLID (FIXED) FEMALE57BSPP SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND09SAE MALE58JIC SWIVEL NUT FEMALE 90° LONG LEG SWEPT BEND10SAE INVERTED FLARE MALE59SAE CODE 61 FLANGE 90° SWEPT BEND11NPTF SOLID (FIXED) FEMALE60BSPP SWIVEL NUT FEMALE 45° SWEPT BEND110SAE CODE 61 FLANGE 110° SWEPT BEND61SAE CODE 62 FLANGE 90° SWEPT BEND12BSP PARALLEL MALE615CAT XT5 FLANGE 90° SWEPT BEND13ORFS SWIVEL NUT FEMALE616O&K SAE CODE 62 FLANGE 90° SWEPT BEND13RORFS SWIVEL NUT FEMALE, SHORT STEM62SAE CODE 62 FLANGE 45° SWEPT BEND133ORFS SWIVEL NUT FEMALE 30° SWEPT BEND625CAT XT5 FLANGE 45° SWEPT BEND135SAE CODE 61 FLANGE 135° SWEPT BEND626O&K SAE CODE 62 FLANGE 45° SWEPT BEND14BSP TAPER MALE SWIVEL63ORFS SWIVEL NUT FEMALE 45° SWEPT BEND15BSP TAPER MALE 64JIC SWIVEL NUT FEMALE 45° SWEPT BEND16NPTF MALE65MINI-CHECK TEST POINT METRIC FEMALE/SPIGOT17METRIC MALE (STUD END)66SAE CODE 61 FLANGE 60° SWEPT BEND18JIC MALE67SAE CODE 61 FLANGE 22.5° SWEPT BEND19UNO MALE SWIVEL674SAE CODE 62 FLANGE 22.5° SWEPT BEND20UNO MALE 675CAT XT5 FLANGE 22.5° SWEPT BEND21POCLAIN FLANGE68SAE CODE 61 FLANGE 45° SWEPT BEND22SAE CODE 62 FLANGE STRAIGHT69SAE CODE 61 FLANGE 67.5° SWEPT BEND225CAT XT5 FLANGE STRAIGHT695CAT XT5 FLANGE 67.5° SWEPT BEND226O&K SAE CODE 62 FLANGE STRAIGHT70JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE23SAE CODE 61 FLANGE STRAIGHT71JIS ( KOMATSU ) FLANGE STRAIGHT236O&K SAE CODE 61 FLANGE STRAIGHT72JIS ( KOMATSU ) FLANGE 90° SWEPT BEND24BSPT MALE SWIVEL 90°73JIS ( KOMATSU ) FLANGE 45° SWEPT BEND25BSP PARALLEL SWIVEL NUT FEMALE 90° COMPACT74FRENCH GAZ METRIC SWIVEL NUT FEMALE26BSPT MALE 90° COMPACT75JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEMALE27SAE SWIVEL NUT FEMALE 90° COMPACT76DIN METRIC 60° CONE SWIVEL NUT FEMALE28JIC MALE SWIVEL 90° COMPACT77METRIC GLOBESEAL SWIVEL NUT FEMALE29JIC SWIVEL NUT FEMALE 90° COMPACT78HEAVY DIN METRIC MALE30WATERBLAST SWIVEL NUT FEMALE79HEAVY DIN METRIC SWIVEL NUT FEMALE31DIN METRIC 60° CONE MALE STRAIGHT 80LIGHT DIN METRIC MALE32UNO MALE SWIVEL 90° COMPACT81LIGHT DIN METRIC SWIVEL NUT FEMALE33JIC MALE 90° COMPACT82METRIC STANDPIPE34JIS (KOMATSU) METRIC MALE83HEAVY DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND35JIS 30° FLARE (MITSUBISHI) MALE84HEAVY DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND36BSP TAPER MALE 45°85HEAVY DIN METRIC SWIVEL NUT FEMALE 90° COMPACT37SAE SWIVEL NUT FEMALE 45° SWEPT BEND86LIGHT DIN METRIC SWIVEL NUT FEMALE 90° SWEPT BEND38BANJO87LIGHT DIN METRIC SWIVEL NUT FEMALE 45° SWEPT BEND39POCLAIN FLANGE88LIGHT DIN METRIC SWIVEL NUT FEMALE 90° COMPACT39NPOCLAIN FLANGE 90°89JIS ( KOMATSU ) METRIC SWIVEL NUT FEMALE 90° SWEPT BEND39FPOCLAIN FLANGE 45°90HOSE JOINER40ORFS MALE91JIS 30° FLARE ( MITSUBISHI ) SWIVEL NUT FEM. 90° SWEPT BENDS40NORFS MALE 90° SWEPT BEND92IMPERIAL STANDPIPE41SAE SWIVEL NUT FEMALE 90° SWEPT BEND93METRIC 90° STANDPIPE 42SAE INVERTED FLARE MALE 45° SWEPT BEND94SAE IMPERIAL TUBE CONNECTOR43SAE INVERTED FLARE MALE 90 SWEPT BEND95DIN 60° METRIC SWIVEL NUT FEMALE 90° SWEPT BEND44KOBELCO METRIC MALE96LIFESAVER45SAE CODE 61 FLANGE 30° SWEPT BEND97WEO (CEJN) STRAIGHT STANDPIPE 456O&K SAE CODE 61 FLANGE 30° SWEPT BEND46SAE CODE 62 FLANGE 30° SWEPT BEND465CAT XT5 FLANGE 30° SWEPT BEND466O&K SAE CODE 62 FLANGE 30° SWEPT BEND47FRENCH GAZ METRIC MALE 48JIS ( KOMATSU ) METRIC MALESUFFIX CODES FOR SERIES CODES49STAPLELOCK FEMALE 50STAPLELOCK MALENNINETY DEGREE e.g. S40NFFORTY FIVE DEGREE e.g. S40FS SWIVEL MALE e.g. SI8SKCOMPACT BLOCK 45° e.g. S64K, S60KCCYLINDRICAL/ROUND BAR TAIL STYLE e.g. S01CHHEXAGONAL BAR TAIL STYLE e.g. S05HGSGATES GLOBAL SPIRAL NON-SKIVE e.g. S66-2020GSPCMGATES SPIRAL SKIVE TYPEe.g. SMS15-24PCMSUFFIX CODES FOR PART NUMBERS8Our product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

243PRODUCT CATALOGUE 20219 - 5ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONSINFORMATION - R5 FIELD ATTACHABLESINFORMATION - R5 FIELD ATTACHABLESNon-Skive Field Attachable CouplingsAttachable CouplingsEnsure hose is cut square, with minimal end Ensure hose is cut square, with minimal end “ aring”. aring”. Screw ferrule body onto hose in an anti-Screw ferrule body onto hose in an anti-clockwise direction until hose is 3 to 5mm clear clockwise direction until hose is 3 to 5mm clear of inside body.of inside body.Lightly lubricate the tailpiece and the female Lightly lubricate the tailpiece and the female thread of the ferru e body, then screw the, then screw the �tailpiece into the ferrule body in a clockwise tailpiece into the ferrule body in a clockwise direction until the hex on the tailpiece abuts the direction until the hex on the tailpiece abuts the ferrule body.ferrule body.Please refer to training manual for more detailed assembly instructions.ructions.8 8JICSAEJICSAE08Non-Skive Field “thread of the ferruke bodyPlease refer to training manual for more detailed assembly instASSEMBLY INSTRUCTIONSINFORMATION - R5 FIELD ATTACHABLES08Non-Skive Field Attachable CouplingsEnsure hose is cut square, with minimal end “ aring”. Screw ferrule body onto hose in an anti-clockwise direction until hose is 3 to 5mm clear of inside body.Lightly lubricate the tailpiece and the female thread of the ferruke body, then screw the tailpiece into the ferrule body in a clockwise direction until the hex on the tailpiece abuts the ferrule body.Please refer to training manual for more detailed assembly instructions.8JICSAEJICSAEOur product range is constantly evolving and Hydraulink reserve the right to change technical specifications without notice

244PRODUCT CATALOGUE 20219-6R5 FIELD ATTACHABLE COUPLINGS INDEXJICJIC FEMALE STRAIGHTR505Page 9 - 8JIC FEMALE STRAIGHTFOR C5ER5E05Page 9 - 9JIC FEM. SWEPT 45°R564Page 9 - 9JIC FEM. SWEPT 45° FORC5ER5E64Page 9 - 10JIC FEMALE 90° ELBOWR555Page 9 - 10JIC FEM. SWEPT 90° FORC5ER5E55Page 9 - 11NPTFNPTF MALE STRAIGHTR516Page 9 - 11NPTF MALE STRAIGHTFOR C5ER5E16Page 9 - 12

245PRODUCT CATALOGUE 20219-7R5 FIELD ATTACHABLE COUPLINGS INDEXSAESAE FEMALE STRAIGHTR503Page 9 - 12SAE FEMALE STRAIGHTFOR C5ER5E03Page 9 - 12SAE FEMALE SWEPT 45°R537Page 9 - 13SAE FEMALE SWEPT 45°FOR C5ER5E37Page 9 - 13SAE FEMALE SWEPT 90°R541Page 9 - 13SAE FEMALE SWEPT 90°FOR C5ER5E41Page 9 - 14INVERTED SAESAE MALE SWIVELSTRAIGHTR510Page 9 - 14SAE MALE SWIVELSTRAIGHT FOR C5ER5E10Page 9 - 14SAE INVERTED FLARE45° SWEPTR542Page 9 - 15SAE INVERTED FLARE45° SWEPT FOR C5ER5E42Page 9 - 15SAE MALE SWIVELSWEPT 90°R543Page 9 - 15SAE MALE SWIVELSWEPT 90° FOR C5ER5E43Page 9 - 16

246PRODUCT CATALOGUE 20219-8R5 FIELD ATTACHABLE COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.JICR505JIC FEMALE STRAIGHTJIC 37° FLARE FEMALE SWIVEL NUT STRAIGHTPart NumberJIC FemaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Hex A/F(E1)Cutoff - CR505-07047/16-201/46.53/164.804141431R505-08051/2-205/1681/46.40517.517.534R505-09069/16-183/89.55/168.006191937R505-12063/4-163/89.55/168.006222239R505-12083/4-161/212.713/3210.308222241R505-14107/8-145/815.91/212.710272746R505-17121.1/16-123/4195/815.912323249R505-21161.5/16-12125.47/822.216383849R505-26201.5/8-121.1/431.81.1/828.620515156R505-30241.7/8-121.1/238.11.3/834.92457.257.260.2R505-40322.1/2-12250.81.13/1646327363.569.1

247PRODUCT CATALOGUE 20219-9R5 FIELD ATTACHABLE COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.JICR5E05JIC FEMALE STRAIGHT FOR C5EJIC FEMALE 37° CONE CRIMPED NUTPart NumberJIC FemaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Hex A/F(E1)Cutoff - CR5E05-07047/16-201/46.43/164.80414.312.727.9R5E05-08051/2-205/1681/46.40517.512.730.7R5E05-09069/16-183/89.55/16806191930.2R5E05-12083/4-161/212.713/3210.30822.222.236.8R5E05-14107/8-145/815.91/212.710272741.9R5E05-17121.1/16-123/4195/815.91231.831.845.2R5E05-21161.5/16-12125.47/822.21638.138.146.7R5E05-26201.5/8-121.1/431.81.1/828.62050.839.755.9JICR564JIC FEM. SWEPT 45°JIC 45° SWEPT ELBOW 37° CONE ROLLED NUTPart NumberJIC FemaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Drop - HCutoff - CR564-07047/16-201/46.43/164.80414.38.630.5R564-09069/16-183/89.55/1680617.510.437.6R564-12083/4-161/212.713/3210.30822.214.243.9R564-14107/8-145/815.91/212.71025.41653.6R564-17121.1/16-123/4195/815.91231.819.863.3

248PRODUCT CATALOGUE 20219-10R5 FIELD ATTACHABLE COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.JICR5E64JIC FEM. SWEPT 45° FOR C5EJIC 45° SWEPT ELBOW 37° CONE ROLLED NUTPart NumberJIC FemaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Drop - HCutoff - CR5E64-07047/16-201/46.43/164.80414.38.630.5R5E64-09069/16-183/89.55/1680617.510.437.6R5E64-12083/4-161/212.713/3210.30822.214.243.9R5E64-14107/8-145/815.91/212.71025.41653.6R5E64-17121.1/16-123/4195/815.91231.819.863.3JICR555JIC FEMALE 90° ELBOWJIC 37° FLARE FEMALE SWIVEL NUT 90° ELBOWPart NumberJIC FemaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Drop (H)Cutoff - CR555-07047/16-201/46.53/164.804141827R555-09069/16-183/89.55/168.006182134R555-12083/4-161/212.713/3210.308222842R555-14107/8-145/815.91/212.710253254R555-17121.1/16-123/4195/815.912324668R555-08051/2-205/1681/46.40515.919.831.8R555-21161.5/16-12125.47/822.21638.154.970.1

249PRODUCT CATALOGUE 20219-11R5 FIELD ATTACHABLE COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.JICR5E55JIC FEM. SWEPT 90° FOR C5EJIC FEMALE 37° CONE CRIMPED NUTPart NumberJIC FemaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Drop (H)Cutoff - CR5E55-07047/16-201/46.43/164.80414.317.525.4R5E55-09069/16-183/89.55/1680617.521.334.5R5E55-12083/4-161/212.713/3210.30822.227.739.1R5E55-14107/8-145/815.91/212.71025.431.848.5R5E55-17121.1/16-123/4195/815.91231.84662R5E55-21161.5/16-12125.47/822.21638.154.967.6NPTFR516NPTF MALE STRAIGHTNPTF MALE 60° CONE Part NumberBSPT MaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Cutoff - CR516-02041/8-271/46.43/164.80412.723.9R516-04041/4-181/46.43/164.80414.328.7R516-06063/8-183/89.55/1680617.531R516-08081/2-141/212.713/3210.30822.240.4R516-12123/4-143/4195/815.9122742.9R516-16161-11.1/2125.47/822.21634.943.7

250PRODUCT CATALOGUE 20219-12R5 FIELD ATTACHABLE COUPLINGS† - Please contact Hydraulink for further details and availability.Pricing current as at 6 Dec 2020 and excludes GST. Hydraulink reserve the right to change pricing and technical specifications without notice.NPTFR5E16NPTF MALE STRAIGHT FOR C5ENPTF MALE 60° CONE SUIT C5E HOSEPart NumberBSPT MaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Cutoff - CR5E16-02041/8-271/46.43/164.80412.720.6R5E16-04041/4-181/46.43/164.80414.326.2R5E16-06063/8-183/89.55/1680617.526.4R5E16-08081/2-141/212.713/3210.30822.232.8R5E16-12123/4-143/4195/815.9122736.6R5E16-16161-11.1/2125.47/822.21634.944.2SAER503SAE FEMALE STRAIGHTSAE 45° FLARE FEMALE SWIVEL NUT STRAIGHTPart NumberSAEFemaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Hex A/F(E1)Cutoff - CR503-10065/8-183/89.55/168.006191937R503-17121.1/16-143/4195/815.91231.831.849.3SAER5E03SAE FEMALE STRAIGHT FOR C5ESAE FEMALE 45° CONE CRIMPED NUTPart NumberSAEFemaleThread (T)NominalHose I.D -inchesNominalHose I.D -mmTrue HoseI.D - inchesTrue HoseI.D - mmDash sizeHex A/F (E)Hex A/F(E1)Cutoff - CR5E03-10065/8-183/89.55/16806191932.5R5E03-17121.1/16-143/4195/815.91231.831.845.7