Technical Specifications

KEY FEATURES FISCHER CORE SERIES BROADCAST Professional broadcasters and producers demand high performance, BROADCAST reliable equipment. Fischer Connectors delivers consistently, offering leading edge technology, consulting, installation, and training. Our 1051 HD Triax Pro+™ connectors link HD video cameras and related equipment dependably.RUGGED FOR OPTIMIZED FOR DURABLE THE BEST OF TRIAXOUTDOOR USE BROADCASTERS ■ HD / SD signal compliant■ Drag it below roads, above ■ Fast and easy cable assembly ■ Corrosion resistant ■ Lower cost of ownership trees and around the stadium and field maintenance ■ Sealed up to IP68 vs SMPTE 304 solution■ Constant quality ■ Long transmission distance when mated of transmission (30% longer than Triax 14) ■ Operating temperature :■ Professional data quality ■ Over 5,000 mating cycles -55°C to +135°C G  1

BROADCAST FISCHER CORE SERIES BROADCAST G  2 Technical Specifications

Table of contents FISCHER CORE SERIES BROADCASTPLUGS RECEPTACLES BROADCASTCABLE MOUNTED CABLE MOUNTED ■ Body style selection (SE; SE-SE).................................... G  4 ■ Body style selection (KE; KE-KE).................................. G 5 ■ Technical dimensions............................................................ G  6 ■ Technical dimensions........................................................... G12PANEL MOUNTED PANEL FRONT MOUNTED ■ Body style selection (DS; DSQ)...................................... G  4 ■ Body style selection (DB; DBQ).................................... G 5 ■ Technical dimensions............................................................ G 8 ■ Technical dimensions........................................................... G 14PANEL MOUNTED WITH CABLE CLAMP PANEL MOUNTED WITH CABLE CLAMP ■ Body style selection (DSR)................................................ G 4 ■ Body style selection (DKE; DKBE).............................. G 5 ■ Technical dimensions............................................................ G 10 ■ Technical dimensions........................................................... G 16PANEL FEEDTHROUGH PANEL FEEDTHROUGH ■ Body style selection (DS-K)............................................. G 4 ■ Body style selection (KE-KE)........................................... G 5 ■ Technical dimensions........................................................... G 11 ■ Technical dimensions........................................................... G 17FOR ALL BROADCAST ■ Recommended cables................................................................................................. G 26 ■ Technical information.................................................................................................... G 28■ Cable clamp sets............................................................................................................. G 18 ■ Cross-line technical information............................................................................. A 9■ Accessories......................................................................................................................... G  21■ Tooling.................................................................................................................................... G  24 G  3

FISCHER CORE SERIES BROADCAST Body style selection PLUGS CABLE MOUNTED BODY STYLES SE SE-SE Locking system Push-pull Push-pull Sealing Design IP68 IP50 Standard In-line adapterBROADCAST PANEL MOUNTED DS DSQ DSR DS-K BODY STYLES Push-pull Push-pull Push-pull Push-pull Locking system Sealing IP50 IP50 IP50 IP50 Design Standard Square flange Cable mounted Bulkhead feedthrough G  4 Technical Specifications

Body style selection FISCHER CORE SERIES BROADCASTRECEPTACLESCABLEMOUNTEDBODY STYLES KE KE-KESealing IP68 IP50Design Standard In-line adapterPANEL FRONT DB DKE DBQ BROADCASTMOUNTED IP50 IP68 IP50BODY STYLES Standard Cable mounted Square flangeSealing Design PANEL REARMOUNTEDBODY STYLES DKBE KE-KESealing IP68 IP50Design Cable mounted Bulkhead feedthrough G  5

FISCHER CORE SERIES BROADCAST Technical dimensionsPLUGS SECABLE FOR Ø 12.2 TO Ø 15.2 MM CABLESMOUNTEDSEFOR Ø 8.4 TO Ø 11.9 MM CABLESHD Pro+ (130) 83.5 86BROADCAST 15 ø 25.5 ø 29 15 20 19 27Cable plug Cable group1) Cable clamp part number 2) Cable plug part number Cable group1) Cable clamppart number part number 1 E3 SE1051.3/A004-9/1.0/4.5/8.7 SE 1051 A004-4 1.4/6.6/12.6 4SE 1051 A004-9+ 2 E3 SE1051.3/A004-9/1.0/4.5/9.4 SE 1051 A004-4 T1895/13.6 5 Included 2 E3 SE1051.3/A004-9/1.4/4.5/9.4 SE 1051 A004-4 2.1Ls/10s/15.2 6SE 1051 3 E3 SE1051.3/A004-9/1.4/6.6/11.3A004-HD Pro+ 1) See list of recommended cables on page page G 26. 3 HD Pro+ E3 SE1051.3/A004 HD Pro/1.75/7.5/11.91) See list of recommended cables on page G 26.2) See cable clamp details on page G 18.G  6 Technical Specifications

Technical dimensions FISCHER CORE SERIES BROADCASTPLUGSIN-LINEADAPTERSE-SEFOR CONNECTION OF PANELOR CABLE RECEPTACLES 64 34 ø 23 BROADCASTAdapter part number Suitable forSE-SE 1051 A004 KE, DB and DKE connectionsAll dimensions and images shown are in millimeters and are for reference only. G  7

FISCHER CORE SERIES BROADCAST Technical dimensions PLUGS DS FOR Ø 11.3 MM CABLES, WITH CABLE GUIDE PANEL MOUNTED 55 max. 10 DS FOR Ø 8.5 MM CABLES 40 4.5 4.5 max. 15BROADCAST ø 36 ø 11.3 ø 36 M28x1 32 28 32 M28x1 Panel plug part number Panel plug part number DS 1051 A004-3 1.0/5.0 DS 1051 A004-3 1.4/6.6 PANEL CUT-OUT 27 ø 28 PANEL CUT-OUT 27 ø 28 Panel cut-out Panel cut-out G  8 Technical Specifications

Technical dimensions FISCHER CORE SERIES BROADCASTPLUGS G  9PANELMOUNTED WITH SMB ADAPTORDS SMB MALE PLUGPANEL PLUG WITH 75 37.8 18.5 2 15.3 ø 28 BROADCAST ø 35.9 ø 45 Panel plug part number 120° (3x) 120° (3x ø 3.2) DS 1051 A004-SMB75/M on ø 39PANEL CUT-OUT ø 39 ø 28.2 Panel cut-outAll dimensions and images shown are in millimeters and are for reference only.

FISCHER CORE SERIES BROADCAST Technical dimensions PLUGS PANEL PANEL MOUNTED WITH CABLE CLAMP MOUNTED DSR DSQ FOR Ø 8.5 TO Ø 11.9 MM CABLES FOR Ø 8.5 MM CABLES, WITH SQUARE FLANGE 85 10 3 15.5 max.15 4.5BROADCAST 38 31 (4x ø 3.4) ø 28 ø 36 M28x1 ø 36 17 19 32 40 Panel plug part number Panel plug part number Cable group1) Cable clamp DSQ 1051 A004-3 1.0/5.0 DSR 1051 A004-9+ part number 2) 1 E3 1051.5/A004-9/1.0/4.5/8.7 31 2 E3 1051.5/A004-9/1.0/4.5/9.4 2 E3 1051.5/A004-9/1.4/4.5/9.4 3 E3 1051.5/A004-9/1.4/6.6/11.3 DSR 1051 A004-HD Pro+ 3 HD Pro+ E3 1051.5/A004 HD Pro/1.75/7.5/11.9 PANEL CUT-OUT 1) See list of recommended cables on page G 26. 2) See cable clamp details on page G 20. 31 ø 28.2 27 Panel cut-out PANEL CUT-OUT ø 28 Panel cut-out G  10 Technical Specifications

Technical dimensions FISCHER CORE SERIES BROADCASTPLUGS PANELPANEL FEEDTHROUGHMOUNTED WITH CABLE CLAMP DS-KDSR FOR CONNECTION OF CABLE PLUGS AND CABLE RECEPTACLESFOR Ø 12.2 TO Ø 15.2 MM CABLES 41 90 2 23 max. 15 4.5 19 22 32 M28x1 ø 36 ø 36 ø 23.5 ø 19 23.5 (4x ø 4.3) BROADCASTPanel plug part number Cable group1) Cable clamp Feedthrough part number Suitable for part number DS-K 1051 A004 SE with KE connectionsDSR 1051 A004-4 1.4/6.6/12.6 4DSR 1051 A004-4 T1895/13.6 5 IncludedDSR 1051 A004-4 2.1Ls/10s/15.2 61) See list of recommended cables on page G 26. 23.5 27 23.5PANEL CUT-OUT ø 28 PANEL CUT-OUT ø 23.7 Panel cut-out Panel cut-outAll dimensions and images shown are in millimeters and are for reference only. G  11

FISCHER CORE SERIES BROADCAST Technical dimensions RECEPTACLES KE FOR Ø 12.2 TO Ø 15.2 MM CABLES CABLE MOUNTED KE FOR Ø 8.4 TO Ø 11.9 MM CABLES HD Pro+ (132) 89 85.6BROADCAST ø 23.5 ø 29 15 20 19 27 17 Cable receptacle Cable group1) Cable clamp Cable receptacle part number Cable group1) Cable clamp part number part number 2) part number 1 E3 KE1051.4/A004-9/1.0/4.5/8.7 KE 1051 A004-4 1.4/6.6/12.6 4 KE 1051 A004-9+ 2 E3 KE1051.4/A004-9/1.0/4.5/9.4 KE 1051 A004-4 T1895/13.6 5 Included 2 E3 KE1051.4/A004-9/1.4/4.5/9.4 KE 1051 A004-4 2.1Ls/10s/15.2 6 KE 1051 A004-HD Pro+ 3 E3 KE1051.4/A004-9/1.4/6.6/11.3 3 HD Pro+ 1) See list of recommended cables on page G 26. E3 KE1051.4/A004-HD Pro/1.75/7.5/11.9 1) See list of recommended cables on page G 26. 2) See cable clamp details on page G 19.G  12 Technical Specifications

Technical dimensions FISCHER CORE SERIES BROADCASTRECEPTACLESIN-LINEADAPTERKE-KEFOR CONNECTION OF CABLE OR PANEL PLUGS 42 ø 23.5 BROADCASTAdapter part number Suitable forKE-KE 1051 A004 SE, DS and DSR connectionsAll dimensions and images shown are in millimeters and are for reference only. G  13

FISCHER CORE SERIES BROADCAST Technical dimensions RECEPTACLES max. 7 17 DB 1 FOR Ø 11.3 MM CABLES, WITH CABLE GUIDE PANEL FRONT MOUNTED max. 4 1 DB FOR Ø 8.5 MM CABLES 17BROADCAST ø 23.5 ø 11.3 ø 23.5 M20x1 25 20 25 M20x1 39.5 53 Receptacle part number Receptacle part number DB 1051 A004-3 1.4/6.6 DB 1051 A004-3 1.0/5.0 PANEL CUT-OUT 19 ø 20 PANEL CUT-OUT 19 ø 20 Panel cut-out Panel cut-out G  14 Technical Specifications

Technical dimensions FISCHER CORE SERIES BROADCASTRECEPTACLESPANEL PANEL FRONTMOUNTED WITH SMB ADAPTER MOUNTEDDB DBQPANEL RECEPTACLE WITH 75 SMB MALE PLUG FOR Ø 8.5 MM CABLES, WITH SQUARE FLANGE max. 5 17 39.5 1 3 16 ø 23.5 38 31 (4x ø 3.4) ø 23.5 BROADCAST 25 M20x1 Receptacle part number 34.5 DBQ 1051 A004-3 1.0/5.0Panel receptacle part number 31 DB 1051 A004-SMB75/M PANEL CUT-OUT 31 ø 25PANEL CUT-OUT 19 ø 20 Panel cut-out Panel cut-outAll dimensions and images shown are in millimeters and are for reference only. G  15

FISCHER CORE SERIES BROADCAST Technical dimensions RECEPTACLES PANEL PANEL MOUNTED WITH CABLE CLAMP MOUNTED WITH CABLE CLAMP DKE DKE FOR Ø 12.2 TO Ø 15.2 MM CABLES FOR Ø 8.4 TO Ø 11.9 MM CABLES 85.2 5 17.2 89 6 17.2 max.12 max.12BROADCAST 30 ø 23.5 ø 33.8 ø 23.5 ø 38 17 21 M25x1 19 24 M30x1 36 Receptacle part number Cable group1) Cable clamp part number2) Receptacle part number Cable group1) Cable clamp DKE 1051 A004-9+ part number2) DKE 1051 A004-HD Pro+ 1 E3 1051.5/A004-9/1.0/4.5/8.7 DKE 1051 A004-4 1.4/6.6/12.6 4 2 E3 1051.5/A004-9/1.0/4.5/9.4 DKE 1051 A004-4 T1895/13.6 5 Included 2 E3 1051.5/A004-9/1.4/4.5/9.4 DKE 1051 A004-4 2.1Ls/10s/15.2 6 3 E3 1051.5/A004-9/1.4/6.6/11.3 3 HD Pro+ E3 1051.5/A004 HD Pro/1.75/7.5/11.9 1) See list of recommended cables on page G 26. 2) See cable clamp details on page G 20. 23.7 PANEL CUT-OUT ø 25 PANEL CUT-OUT ø 30 Panel cut-out Panel cut-outG  16 Technical Specifications

Technical dimensions FISCHER CORE SERIES BROADCASTRECEPTACLES PANEL FEEDTHROUGHPANELMOUNTED WITH CABLE CLAMP KE-KE 42 FOR CONNECTION OF CABLE PLUGS 26DKBEFOR Ø 8.4 TO Ø 11.9 MM CABLES 2 85.2 30 5 max.6 17 21 31 M25x1 ø 31 ø 34 ø 4.3 ø 23.5 35 BROADCASTReceptacle part number Cable group1) Cable clamp part number2) Feedthrough part number Suitable for KE-KE 1051 A004-8 SE connections 1 E3 1051.5/A004-9/1.0/4.5/8.7DKBE 1051 A004-9+ 2 E3 1051.5/A004-9/1.0/4.5/9.4DKBE 1051 A004-HD Pro+ 2 E3 1051.5/A004-9/1.4/4.5/9.4 3 E3 1051.5/A004-9/1.4/6.6/11.3 3 HD Pro+ E3 1051.5/A004 HD Pro/1.75/7.5/11.91) See list of recommended cables on page G 26. 23.32) See cable clamp details on page G 20. 23.7PANEL CUT-OUT ø 25 PANEL CUT-OUT 23.3 ø 23.7 Panel cut-out Panel cut-outAll dimensions and images shown are in millimeters and are for reference only. G  17

FISCHER CORE SERIES BROADCAST Cable clamp sets FOR SE MODELS Cable clamp setBROADCAST Plug cap is included with the cable clamp set Cable diameters (mm) Cable clamp part number1) SE 1051 A004-9+ 1.0 / 4.5 / 8.7 E3 SE1051.3/A004-9/1.0/4.5/8.7 SE 1051 A004-HD Pro+ 1.0 / 4.5 / 9.4 E3 SE1051.3/A004-9/1.0/4.5/9.4 1.4 / 4.5 / 9.4 E3 SE1051.3/A004-9/1.4/4.5/9.4 1.4 / 6.6 / 11.3 E3 SE1051.3/A004-9/1.4/6.6/11.3 E3 SE1051.3/A004-HD Pro/1.75/7.5/11.9 1.75 / 7.5 / 11.9   HD Pro+ 1) See list of recommended cables on page G 26. G  18 Technical Specifications

Cable clamp sets FISCHER CORE SERIES BROADCASTFOR KE MODELS Cable clamp set Cable receptacle cap is included with the cable clamp set BROADCAST Cable diameters (mm) Cable clamp part number1) KE 1051 A004-9+ KE 1051 A004-HD Pro+ 1.0 / 4.5 / 8.7 E3 KE1051.4/A004-9/1.0/4.5/8.7 1.0 / 4.5 / 9.4 E3 KE1051.4/A004-9/1.0/4.5/9.4 1.4 / 4.5 / 9.4 E3 KE1051.4/A004-9/1.4/4.5/9.4 1.4 / 6.6 / 11.3 E3 KE1051.4/A004-9/1.4/6.6/11.3 1.75 / 7.5 / 11.9  HD Pro+ E3 KE1051.4/A004 HD Pro/1.75/7.5/11.9 1) See list of recommended cables on page G 26.All dimensions and images shown are in millimeters and are for reference only. G  19

FISCHER CORE SERIES BROADCAST Cable clamp sets FOR DSR, DKBE AND DKE MODELS Cable clamp setBROADCAST Cable diameters (mm) Cable clamp part number1) DSR 1051 A004-9+ DKBE 1051 A004-9+ 1.0 / 4.5 / 8.7 E3 1051.5/A004-9/1.0/4.5/8.7 DKE 1051 A004-9+ 1.0 / 4.5 / 9.4 E3 1051.5/A004-9/1.0/4.5/9.4 DSR 1051 A004-HD Pro+ 1.4 / 4.5 / 9.4 E3 1051.5/A004-9/1.4/4.5/9.4 DKBE 1051 A004-HD Pro+ 1.4 / 6.6 / 11.3 E3 1051.5/A004-9/1.4/6.6/11.3 DKE 1051 A004-HD Pro+ 1.75 / 7.5 / 11.9 HD Pro+ E3 1051.5/A004-HD Pro/1.75/7.5/11.9 1 See list of recommended cables on page G 26. G  20 Technical Specifications

Accessories FISCHER CORE SERIES BROADCASTFOR A004-9 & HD PRO+MODELS Description Part number Suitable for Protective sleeve 1051.1569 All SE, KE Plug cap 1051.1576 All SE, DS, DSR Receptacle 1051.1577 All KE, DKE, BROADCAST cap DKBE, DBCOMBINED SLEEVE & CAP FOR A004-4 MODELS Description Part number Suitable for Protective 1051.875 SE 1051 A004-4 1.4/6.6/12.6 sleeve SE 1051 A004-4 T1895/13.6 Protective 1051.874 SE 1051 A004-4 2.1Ls/10s/15.2 sleeve Protective 1051.876 KE 1051 A004-4 1.4/6.6/12.6 sleeve KE 1051 A004-4 T1895/13.6 Protective 1051.877 KE 1051 A004-4 2.1Ls/10s/15.2 sleeveAll dimensions and images shown are in millimeters and are for reference only. G  21

FISCHER CORE SERIES BROADCAST Accessories SPARE PARTS SOLDER LUG WITH FORKS CRIMP FERRULESBROADCAST D A B Part A B Suitable for Part number D Suitable for number 1051.311 30 DB 1051.615 34 DS SE 1051 A004-4 T1895/13.6 KE 1051 A004-4 T1895/13.6 1051.910 11.8 12.5 DKE 1051 A004-4 T1895/13.6 DSR 1051 A004-4 T1895/13.6 DSR 1051 A004-4 2.1Ls/10s/15.2 SE 1051 A004-4 2.1Ls/10s/15.2 1051.922 14.3 15.5 KE 1051 A004-4 2.1Ls/10s/15.2 DKE 1051 A004-4 2.1Ls/10s/15.2G  22 Technical Specifications

Accessories FISCHER CORE SERIES BROADCASTSPARE PARTSCRIMP AND/OR SOLDER CONTACTS D BROADCASTPart number D Suitable for1051.9001051.905 1.0 A004-x 1.0/xx/xx1051.919 1.5 A004-x 1.4/xx/xx1051.906 1.8 A004-x HD Pro+ 2.5 A004-4 T1895 A004-4 2.1LsAll dimensions and images shown are in millimeters and are for reference only. G  23

FISCHER CORE SERIES BROADCAST Tooling SPANNER FOR INNER THREADED RING HOOK SPANNER FOR SLOTTED NUTSBROADCAST Part number Suitable for Part number Suitable for TQ00.002 All body styles -4 TX00.105 30-32 DS + DSR + DKE -9 + DKE HD-Pro+ TX00.106 34-36 DKE -4 NUT DRIVER CONTACT CRIMP TOOL Part number Suitable for Part number Description TQ00.005 31 DKBE TX00.242 Buchanan 615708 G  24 Technical Specifications

Tooling FISCHER CORE SERIES BROADCASTCONTACT CRIMP TOOL POSITIONER SHIELD CRIMP TOOL DIESPart number Suitable for Part number Hexagon width Description BROADCASTTX00.315 All connectors corresponding to cable groups 1 to 41) TX00.270 10.9 Daniels Y178 (M 22520/5-61)TX00.317 All connectors corresponding to cable groups 5 to 6 1) TX00.271 13.51 Daniels Y151 (M 22520/5-27)1) See list of recommended cables on page G 26.SHIELD CRIMP TOOL WITHOUT DIESPart number DescriptionTX00.245 Daniels HX4 (M 22520/5-01)All dimensions and images shown are in millimeters and are for reference only. G  25

FISCHER CORE SERIES BROADCAST Recommended cables RECOMMENDED TRIAXIAL CAMERA CABLES 75 Cable Cable diameters1) [mm]BROADCAST Brand Type Reference Core Dielectric Ext. Recommended connectors 2) Recommended clamp set Bedea Standard 8 (PUR) – 1.0 4.5 8.5 Bedea Superflex 8 (TPE flex) – 1.0 4.5 8.6 All body styles 1051 A004-9+ E3 1051.1/A004-9/1.0/4.5/8.7 Belden Triax 8 7783A 1.0 4.5 8.4 DS+DB+DSQ+DBQ N/A Draka Triax 8 (PVC) CT2765700 1.0 4.5 8.4 1051 A004-3 1.0/5.0 1 Triflex 8 (PUR) CT2767900 1.0 4.5 8.4 E3 1051.1/A004-9/1.0/4.5/9.4 Draka 8.5mm (PVC or PUR) RX 75/55 1.0 4.7 8.5 E3 1051.1/A004-9/1.4/4.5/9.4 Intercond 4.8/1.0 EFTXF – 1.0 4.8 8.6 N/A Fujikura TRIAX 4.8/1.0-TUFRET 3118-250 1.0 4.8 8.8 Hirakawa E3 1051.1/A004-9/1.4/6.6/11.3 N/A Belden – 9267, 0.8 3.7 9.2 E3 SE1051.3/A004-HD Pro/1.75/7.5/11.9 2 Triax 8 (FRNC) 1857A All body styles 1051 A004-9+ E3 KE1051.3/A004-HD Pro/1.75/7.5/11.9 Reinforced E3 1051.5/A004-HD Pro/1.75/7.5/11.9 Draka CT2853203 1.0 4.5 9.0 DS+DB+DSQ+DBQ 1051 A004-3 1.0/5.0 Belden Triax 11 7784AS 1.4 6.5 11.2 Intercond 11.0mm (PVC or PUR) RX 75/56 1.4 6.5 11.0 Bedea Standard 11 (PUR) – 1.4 6.5 11.0 All body styles 1051 A004-9+ Bedea Superflex 11 (TPE flex) – 1.4 6.0 11.3 DS+DB 1051 A004-3 1.4/6.6 3 Draka Triax 11 (PVC) CT2766400 1.4 6.5 11.0 Draka Triflex 11 (PUR) CT2768100 1.4 6.5 11.0 Draka HD Pro+ CT 1.75 7.5 11.9 All body styles 1051 A004-HD Pro+ 2768700 G  26 Technical Specifications

Recommended cables FISCHER CORE SERIES BROADCASTRECOMMENDED TRIAXIAL CAMERA CABLES 75 Cable Cable diameters1) [mm] Recommended connectors 2) Recommended clamp set Type Core Dielectric Ext.Brand Reference Included N/A4 Draka Triax 11/1 (PU) CT2767101 1.4 SE+KE+DSR+DKE 1051 A004-4 1.4/6.6/12.6 Reinforced 6.5 12.2 DS+DB 1051 A004-3 1.4/6.65 Belden – 9192, 9232 1.6 8.0 13.2 SE+KE+DSR+DKE 1051 A004-4T1895/13.6 Included Included Belden Triax 14 7785A 2.2 9.7 14.5 BROADCAST Intercond 14.0mm (PVC or PUR) RX 75/57 2.2 9.7 14.0 Draka Triax 14 (PVC) CT2766700 2.2 9.7 14.4 Draka Triax 14 (PUR) CT2767000 2.2 9.7 14.56 Bedea Standard 14 (PUR) – 2.2 9.7 14.4 SE+KE+DSR+DKE 1051 A004-4 2.1Ls/10s/15.2 Bedea Superflex 14 (TPE flex) – 2.2 9.7 14.5 Fujikura 9.6/2.22 EFTXF – 2.2 9.6 14.5 Hirakawa TRIAX-1/2.22-TUFRET 3118-290 2.2 9.6 14.51) The cable dimensions listed are reference only, sizes may vary according to production batch.2) Connector types for other cables not listed are by request.Please note that there are many additional cables in the marketplace that can be matched with Fischer Connectors.Please contact your local sales representative for assistance with cables not listed above.All dimensions and images shown are in millimeters and are for reference only. G  27

FISCHER CORE SERIES BROADCAST Technical information MECHANICAL & ENVIRONMENTAL DATA Parameter Values Norm 5000 Mating cycles Temperature range -55°C to + 135°C - 1051 A004-3 -55°C to + 135°C - 1051 A004-4 -40°C to + 85°C - 1051 A004-9 10 to 2000 Hz, 1.5 mm or 20 g, no discontinuity > 1 μs EIA-364-28, Test cond.IV (MIL- STD-1344, Method 2005 superseded) VibrationBROADCAST IP68 when mated or with fitted sealing caps IEC 60529 Protection level 2 m/24 h IEC 60068-2-11,Test Ka MIL-STD-202, Method 101, cond. A SE, KE, DKE Corrosion, salt spray 96 h with 5% salt solution at 35°C MATERIAL & SURFACE TREATMENTS Part Materials Finish Housings Brass Chrome over Nickel - 1051 A004-3 Brass Chrome over Nickel - 1051 A004-4 Brass, Steel, PA Nickel - 1051 A004-9 Brass Nickel Housing accessories Bronze Gold over Nickel Inner contact Brass Gold over Nickel Crimp contact Brass Gold over Nickel Outer contact Brass Nickel Ground contact PTFE, PCTFE, PP-H - Insulators PTFE, PCTFE, PP-H - - 1051 A004-3 POM, PP-H, PEI - - 1051 A004-4 PEEK, PET - - 1051 A004-9 NBR, NBR Low Temp - Washers TPE - O-ring seals G  28 Cable seal and protections Technical Specifications

Technical information Values FISCHER CORE SERIES BROADCAST BROADCAST 75ELECTRICAL DATA Norm 1.7 kVAC Parameter 1.0 kVAC IEC 60512-4-1, Test 4a, Method c 14 A IEC 60512-5-2, Test 5b Nominal impedance IEC 60512-2-1, Test 2a Test voltage at sea level (mated) < 3 m IEC 60512-2-2, Test 2b - Center to outer contact < 0.5 m IEC 60512-3-1, Test 3a - Outer to ground contact < 5 m Current rating per contact > 1010 Contact resistance - Center contact < 1.05 - Outer contact < 1.2 - Ground contact Insulation resistance VSWR (Voltage Standing Wave Ratio) - 0 to 250 MHz - 250 to 1300 MHz G  29

FISCHER CORE SERIES Custom solutions POWER CONNECTORS ■ IP68 sealing (mated) ■ Mistake-proofing connection ■ Safe and secured scoop-proof system TECHNICAL FEATURESCUSTOM Current rating up to 275 A SOLUTIONS Rated voltage up to 7000 V dc up to 5000V ac Body materials Aluminium AlMgSiSn1Bi (EN-AW-6023), Nickel Chrome and platings Brass CuZn39Pb3 (CW614N), Nickel Chrome Plating Custom color Painting on outersleeve Receptacle contact Brass CuZn39Pb3 (CW614N), Silver Plating Multi-Contact Insert B10N Plug contact Brass CuZn39Pb3 (CW614N), Gold Plating Insulator PTFE O-rings Viton G 30 Technical Specifications

Custom solutions FISCHER CORE SERIESHYBRID CONNECTORS ■ Signal, fluid and gas contacts ■ Signal and/or power from 14 to 24 AWG ■ Up to 5 bar fluid/gaz pressure TECHNICAL FEATURES Body Shell Brass CuZn39Pb3 (CW614N), chrome over nickel plating CUSTOM SOLUTIONS Cable Clamp, Nuts and other inner parts Brass CuZn39Pb3 (CW614N), nickel plating Contact Male (solder) Brass CuZn39Pb3 (CW614N), gold over nickel plating Female, Male (crimp) Bronze CuSn4Zn4Pb4 (CW456K), gold over nickel plating Insulator PEEK / PTFE / PBT O-rings Viton G 31

H1>H23 PAGES

FISCHER ULTIMATETM SERIESKEY FEATURES The Fischer UltiMate™ Series offers rugged, compact, lightweight, sealed connectors and cable assembly solutions ideally suited to withstand a variety of severe environmental, industrial and chemical conditions. This circular push-pull connector features excellent 360° EMC shielding, extremely robust keying, and IP68/69 sealing even unmated.DURABILITY PERFORMANCE PERSONALIZED RUGGED ULTIMATE■ Sealing IP68/IP69 ■ 360° EMC shielding ■ Wide range of configurations ■ High shock and even unmated ■ Grounding contact ring ■ Miniature & ultralight design vibration resistance■ Hermetic ■ Easy cable assembly solutions ■ Color overmolding available ■ Operating temperature:■ Extremely robust ■ Crimp and solder contacts -55°C to +135°C mechanical keying ■ High corrosion resistance■ 10,000 mating cycles ■ Blind mating H  1

FISCHERULTIMATE™ SERIES

Table of contents FISCHER ULTIMATETM SERIES RUGGED | COMPACT | LIGHTWEIGHT Ideally suited for harsh environments : Industrial | Transportation | Energy | Defense and security FISCHER ULTIMATE™ SERIES H 4 ULTIMATE H 5 Body style selection H 6 Size overview H 9 Contact configurations H 10 Mechanical coding H 13 Technical dimensions H 16 PCB hole layout H 17 Part numbering H 20 Accessories H 22 Tooling Technical information H  3

FISCHER ULTIMATETM SERIES Body style selection PLUGS RECEPTACLES CABLE CABLE MOUNTED MOUNTED BODY STYLES UP01-L UP01-Q BODY STYLE UR50 Locking system Push-pull Quick-release Sealing IP68/69 Sealing Design Short/Overmolding Design IP68/69 IP68/69 Short/Overmolding Short/Overmolding PANEL FRONT PANEL FRONT MOUNTED MOUNTED BODY STYLE UP50 BODY STYLE UR03 Locking system Non-locking Sealing IP68/69 Hermetic Sealing IP68/69 Design Front-projecting Design Front-projectingULTIMATE PANEL REAR MOUNTED UR01 UR02 BODY STYLES IP68/69 Hermetic IP68/69 Hermetic Sealing Design Front-projecting Rear-projecting H  4 Technical Specifications

Size overview FISCHER ULTIMATETM SERIES ULTIMATEAVAILABLES SIZES H  50708111318Images of available sizes are on 1:1 scale when printed full size on A4 paper.

FISCHER ULTIMATETM SERIES Electrical & contact configurations Wire size 3) PCB Current Rated voltage Test voltage [kV] in mated position contacts rating [A] r.m.s [V] IEC 60512-4-1Test 4a Size AC r.m.s. DC Pin layout Number IEC IEC Contact Contact Contact Contact of contacts 60512-5-2-5b 60664-1 to body to contact to body to contact Contact diameter [mm] 4) 5) Solder contacts 1) Crimp contacts 2) Pin diameter [mm] 2 0.9 max ø0.79mm 6) 0.63 9.2 ≤ 250 1.3 1.7 1.8 2.4 AWG21 [1] 0.63 max ø0.83mm AWG22 [7/30] min ø0.48mm AWG22-26 max ø0.79mm - 8.2 ≤ 250 1.3 1.3 1.8 1.6 3 0.9 AWG21 [1] AWG22 [7/30] max ø0.79mm max ø0.62mm 4 0.7 AWG21 [1] min ø0.38mm 0.50 5.5 ≤ 200 1.2 1.2 1.7 1.8 AWG22 [7/30] AWG24-28 max ø0.79mm max ø0.62mm 07 5 0.7 AWG21 [1] min ø0.38mm 0.50 5.2 ≤ 160 0.8 1.0 1.3 1.8 AWG22 [7/30] AWG24-28ULTIMATE max ø0.43mm max ø0.43mm 7 0.5 AWG26 [1] min ø0.20mm 0.40 2.0 ≤ 160 0.8 1.0 1.3 1.8 AWG28 [19/40] AWG28-32 max ø0.43mm - 0.40 1.7 ≤ 160 0.8 1.1 1.2 1.8 9 0.5 AWG26 [1] AWG28 [19/40] max ø0.43mm - 0.40 1.7 ≤ 160 0.8 0.9 1.2 1.3 10 0.5 AWG26 [1] AWG28 [19/40] 1) Stranding values are in brackets. 2) See dedicated crimping instructions document for further information. 3) For a given AWG, the diameter of some stranded conductor designs could exceptionally be larger than the hole diameter of the barrel. Testing may be required. 4) Recommended max. operating current per contact at 40°C temperature rise. 5) Recommended operating voltage at sea level. This rated voltage is a general purpose guideline where no other electrical safety standard applies. In cases where other standards rule a specific use of the connector, the application-specific safety criteria shall be considered first. This must be evaluated in the framework of equipment engineering. 6) Standard polarity only. H  6 Technical Specifications

Electrical & contact configurations FISCHER ULTIMATETM SERIES Wire size 3) PCB Current Rated voltage Test voltage [kV] in mated position contacts rating [A] r.m.s [V] IEC 60512-4-1Test 4a AC r.m.s. DCSize Pin layout IEC IEC Contact Contact Contact Contact Number 60512-5-2-5b 60664-1 to body to contact to body to contact of contacts Contact 4) 5) diameter [mm] Soldermax ø0.79mm-0.709.2≤ 250 1.3 1.7 1.8 2.4 contacts 1)2 0.9 AWG21 [1] Crimp contacts 2)AWG22 [7/30] Pin diameter max ø0.79mm - 0.70 8.2 ≤ 250 1.3 1.3 1.8 1.6 [mm]3 0.9 AWG21 [1] ULTIMATEAWG22 [7/30] max ø0.79mm max ø0.62mm 4 0.7 AWG21 [1] min ø0.38mm 0.50 5.5 ≤ 200 1.2 1.2 1.7 1.808 AWG22 [7/30] AWG24-28 max ø0.79mm max ø0.62mm 5 0.7 AWG21 [1] min ø0.38mm 0.50 5.2 ≤ 160 0.8 1.0 1.3 1.8 AWG22 [7/30] AWG24-28 max ø0.43mm - 0.40 2.0 ≤ 160 0.8 1.0 1.3 1.8 7 0.5 AWG26 [1] AWG28 [19/40] max ø0.43mm - 0.40 1.7 ≤ 160 0.8 1.1 1.2 1.8 9 0.5 AWG26 [1] AWG28 [19/40]1) Stranding values are in brackets.2) See dedicated crimping instructions document for further information.3) For a given AWG, the diameter of some stranded conductor designs could exceptionally be larger than the hole diameter of the barrel. Testing may be required.4) Recommended max. operating current per contact at 40°C temperature rise.5) Recommended operating voltage at sea level. This rated voltage is a general purpose guideline where no other electrical safety standard applies. In cases where other standards rule a specific use of the connector, the application-specific safety criteria shall be considered first. This must be evaluated in the framework of equipment engineering. H  7

FISCHER ULTIMATETM SERIES Electrical & contact configurations Wire size 3) PCB Current Rated voltage Test voltage [kV] in mated position contacts rating [A] r.m.s [V] IEC 60512-4-1Test 4a Size AC r.m.s. DC Pin layout Number IEC IEC Contact Contact Contact Contact of contacts 60512-5-2-5b 60664-1 to body to contact to body to contact Contact diameter [mm] 4) 5) Solder contacts 1) Crimp contacts 2) Pin diameter [mm] 8 max ø0.79mm max ø0.62mm 7) 8) 0.7 AWG21 [1] min ø0.38mm 0.50 4.2 ≤ 250 1.7 1.8 3.1 2.6 AWG22 [7/30] AWG24-28 12 0.7 max ø0.79mm 7) 8) 0.50 4.2 ≤ 250 1.6 1.6 2.6 2.3 AWG21 [1] max ø0.62mm AWG22 [7/30] min ø0.38mm 11 AWG24-28 max ø0.43mm 16 0.5 AWG26 [1] - 0.40 7) 2.7 ≤ 250 1.2 0.9 2.0 1.5 AWG28 [19/40] max ø0.43mm - 0.40 7) 2.5 ≤ 250 1.2 0.9 2.0 1.5 19 0.5 AWG26 [1]ULTIMATE AWG28 [19/40] 8) 9) 13 27 0.5 max ø0.43mm max ø0.43mm 0.40 8) 2.0 ≤ 200 1.2 0.5 1.8 0.5 AWG26 [1] min ø0.20mm AWG28 [19/40] AWG28-32 42 max ø0.62mm 18 6) 0.7 - min ø0.38mm 0.50 3.0 ≤ 250 1.5 1.5 2.4 2.5 AWG24-28 1) Stranding values are in brackets. 2) See dedicated wire gauge crimping instructions document for further information. 3) For a given AWG, the diameter of some stranded conductor designs could exceptionally be larger than the hole diameter of the barrel. Testing may be required. 4) Recommended max. operating current per contact at 40°C temperature rise. 5) Recommended operating voltage at sea level. This rated voltage is a general purpose guideline where no other electrical safety standard applies. In cases where other standards rule a specific use of the connector, the application-specific safety criteria shall be considered first. This must be evaluated in the framework of equipment engineering. 6) Standard polarity only. 7) Not valid for UP50. 8) UR0x: standard polarity only. 9) Only valid for UP01, UR50. H  8 Technical Specifications

Mechanical coding FISCHER ULTIMATETM SERIESSize Code 1 Code 2 Code 3 Code 4 Size Code 1 Code 2 Code 3 Code 407 0708 08PLUGS RECEPTACLES ULTIMATE11 1113 13 18 18Visual coding Visual coding H  9

FISCHER ULTIMATETM SERIES Technical dimensions PLUGS PANEL FRONT E max 1 CABLE MOUNTED 2 MOUNTED UP50 M UP01 BODY STYLE BODY STYLE øC ø d1) Size øD Size øC ~B 1 BH A ~AULTIMATE Size A B øC øD ød Torque Size A B øC E HM 1 2 Torque max 10.0 5.2 13.0 2.5 07 28.0 18.0 12.0 13.2 7.6 21.8 4.5 08 39.0 25.0 15.0 9.0 4.5 8 1.5 Nm 07 3.0 9x0.5 9 11 1.3 Nm 11 39.5 26.0 18.5 13 50.0 34.0 21.7 10.5 4.5 10 2.5 Nm 11 4.0 16x1 17 19 4.5 Nm 18 58.0 38.0 29.0 14 3.0 Nm 13.7 7.1 1) Max. cable diameter below shield. 16.0 8.7 17 3.5 Nm Top 22.7 13.7 22 6.0 Nm Size f øg +0.1 øg +0.1 07 8.0 9.1 0 0 11 14.5 16.1 f PANEPLanCelUcuTt--OouUt T H  10 Technical Specifications

Technical dimensions FISCHER ULTIMATETM SERIESRECEPTACLES 3 E max UR02 3 E max MPANEL REAR M BODY STYLEMOUNTED* øCUR01 ø 0.7BODY STYLE Size ø 0.7 Size øC øD H IH A IB ASize A øC E H I M Torque Size A B ø C øD E H I M Torque07 14.2 14.0 4.5 3.0 0.7 10x0.5 11 TC00.007 1.5 Nm 07 6.5 10.7 14.0 13.0 3.5 3.5 0.7 9x0.5 11 TC00.000 1.3 Nm ULTIMATE08 18.7 16.9 5.0 4.0 1.0 12x1 15 TF00.001 2.5 Nm 08 8.0 14.7 16.9 14.0 4.0 4.0 1.0 12x1 15 TF00.001 2.5 Nm11 18.7 21.8 7.0 4.0 1.0 16x1 17 TK00.002 4.5 Nm 11 8.0 14.7 21.8 18.8 4.0 4.0 1.0 16x1 17 TK00.002 4.5 Nm13 22.5 23.8 5.5 4.0 1.0 18x1 20 TP00.011 6.0 Nm 13 10.5 16.0 23.8 20.0 5.0 4.0 1.0 18x1 20 TP00.011 6.0 Nm18 29.3 31.8 7.5 4.0 1.0 25x1 27 TQ00.005 10.0 Nm 18 11.0 22.3 31.8 26.0 5.0 4.0 1.0 25x1 27 TQ00.005 10.0 NmSize f øg Top Size f øg Top07 9.2 10.1 +0.1 øg +0.1 07 8.0 9.1 +0.1 øg +0.108 10.9 12.1 0 0 08 10.9 12.1 0 011 14.5 16.1 11 14.5 16.113 16.5 18.1 13 16.5 18.1 f18 23.2 25.1 18 23.2 25.1 f PANEPLanCelUcuTt--OouUt T Panel cut-out PANEL CUT-OUT* Standard version with PCB contacts and grounding pin. For solder contact version, a special solder ground contact pin is included.All dimensions and images shown are in millimeters and are for reference only. H  11

FISCHER ULTIMATETM SERIES Technical dimensions RECEPTACLES 2 E max 1 CABLE M MOUNTED PANEL FRONT MOUNTED* UR50 BODY STYLE UR03 BODY STYLE Size ØD ØC ø d 1) Size øD øC BH A ~L ~L LULTIMATE Size A B øC øD E H L M 1 2 Torque Size ø C øD ø 27 Torque 07 7.7 6.4 14.0 10.0 3.5 2.5 20 9x0.5 11 11 1.3 Nm dmax 39 08 11.7 7.0 16.9 11.5 4.0 4.0 27 12x1 15 14 2.5 Nm 07 12.0 10.0 39 8 1.5 Nm 11 11.1 7.6 21.8 15.0 4.6 4.0 29 16x1 17 19 4.5 Nm 08 15.0 12.0 4.5 50 10 2.5 Nm 11 18.5 15.5 14 3.0 Nm Size 13 21.7 17.9 4.5 17 3.5 Nm 07 1) Max. cable diameter below shield. 08 7.1 11 8.7 Top f øg +0.1 øg +0.1 0 0 8.0 9.1 10.9 12.1 f 14.5 16.1 PANEPLanCeUl cTu-tO-oUutT * Standard version with solder contacts. H  12 Technical Specifications

PCB hole layout Position of optional ground pin FISCHER ULTIMATETM SERIES ø0.8 BODY STYLES R UP01 UP50 UR01 UR02F 5.5 6.0 UR01 UR02 Size 8.4 R 07 9.0F 08 12.0 11 13 18 UR03 UR50FSizeView from F1) 3 4 Number of contacts 7 9 10 ULTIMATE Polarity 2) 5 2 90°(4x) ø0.8 ø0.8Standard 120°(3x) ø0.8 2 1 45° ø0.8 72°(5x) ø0.8 60°(6x) ø0.8 9(84x5) ° ø0.8 54° 1 60° 4 2 1 36° 2 (2x) 1 3 ø0.65 27 42°(6x) 21° 2 ø0.8 3 5 31 22° 30’ 4 ø0.65 30° ø3.3 3 10 ø3.35 29 ø1.18 ø2.2 ø2.2 ø2.6 ø2.9 3 18 4 ø3 2 3 6 4 6ø70.55 5 18 ø0.8 4 5 ø0.55 5 6 7 ø0.5507 Inverted 1 1 2 12 23 92 10 3 2 32 1 53 71 8 13 9 24 3 4 4 74 8 15 4 65 65 7 61) Recommended PCB hole dimensions may be adjusted to application.2) Standard polarity: male contacts on plug / female contacts on receptacle. Inverted polarity: female contacts on plug / male contacts on receptacle.All dimensions and images shown are in millimeters and are for reference only. H  13

FISCHER ULTIMATETM SERIES PCB hole layout View from F1) Size 2 3 Number of contacts 7 9 Polarity 2) ø0.8 45 Standard 1 120°(3x) ø0.8 90°(4x) ø0.8 ø0.8 72°(5x) ø0.8 60°(6x) ø0.8 9(84x5) ° 2 ø0.85 1 60° 2 1 45° 2 1 36° 2 4 27 1 3 ø0.65 3 5 31 2 22° 30’4ø0.65 40° ø2.2 ø2.2 30° 3 18 ø2.6 ø2.9 6ø70.55 ø3 ø3.3 2 3 6 4 ø0.85 4 5 ø0.55 5 08 Inverted 1 2 12 23 92 32 1 53 71 8 13 3 4 4 74 4 65 65 Size Number of contacts Polarity 2)ULTIMATE 8 12 16 19 ø0.8 45° ø0.8 40° ø0.8 18° 36°72° ø0.8 15° 30° Standard 8 60° ø0.55 7 16 60° 8 19 1 54 12 8 6 15 9 18 2 61 92 76 17 3 11 3 1 5 14 10 2 1 ø5.3 72 10 ø2.18 ø5.39 ø2.9ø0.65 ø5.6 ø2.9 ø5.6 37 11 3 5 16 6 10 4 13 11 12 12 4 15 ø0.65 4 5 ø0.55 13 14 11 Inverted 1 12 4 15 16 7 18 19 8 8 5 14 5 17 6 7 2 2 6 12 8 9 11 3 1 9 1 10 6 73 16 5 3 11 6 54 10 2 7 13 4 3 10 9 8 12 11 15 4 12 14 13 1) Recommended PCB hole dimensions may be adjusted to application. 2) Standard polarity: male contacts on plug / female contacts on receptacle. Inverted polarity: female contacts on plug / male contacts on receptacle. H  14 Technical Specifications

PCB hole layout FISCHER ULTIMATETM SERIESView from F1)Size Number of contacts Size Number of contacts Polarity 2) 27 Polarity 2) 42 ø0.8 ø0.8 1.43 1.6 1.43 = = 1.43 32 25 19 12 6 38 ø0.55 9 4 1 0.41 1.24 1 15 5 Standard 10 Standard 4.5 1.8 2.7 3.6 5.4 20 16 0.9 24 21 1.24 1.24 27 25 42 5 37 24 11 1.43 1.43 ø0.65 31 18 3.2 4.813 18 ULTIMATE ø0.8 ø0.8 1.6 1.43 6 12 25 32 19 38 1.43 = = 1.43 1 Inverted ø0.55 5 1 4 0.41 1.24 Inverted 4.5 1.8 10 9 2.7 3.6 15 5.4 0.9 16 20 5 42 21 24 11 18 24 31 37 25 27 ø0.65 3.2 1.43 1.43 4.81) Recommended PCB hole dimensions may be adjusted to application.2) Standard polarity: male contacts on plug / female contacts on receptacle. Inverted polarity: female contacts on plug / male contacts on receptacle.All dimensions and images shown are in millimeters and are for reference only. H  15

FISCHER ULTIMATETM SERIES Part numbering Connector Design Contact Block Housing Standard options M 010 S BK 1 Example : UP01 L 07 F 012 S BK 2 Z2ZB Body style UR01 W 11 E 1 A A Housing Material UltiMate Plug = UP ■ A = ALUMINUM ■ UP01 = Cable mounted plug ■ B = BRASS (Standard) ■ UP50 = Panel mounted plug UltiMate Receptacle = UR Grounding Cable mounted : ■ UR01 = Panel rear mounted low profile Panel mounted : ■ Z = Not applicable ■ UR02 = Panel rear mounted ■ A = Grounding pin ■ UR03 = Panel front mounted low profile (available for UR01/UR02) ■ UR50 = Cable mounted ■ B = Grounding tag Sealing level ■ N = None (on all UR03/UP50) Panel mounted : ■ V = Vacuum sealing Insulator Material ■ 2 = PEEK. Size 07 only ■ W = Water sealing ■ 1 = PBT, Size 08/11/13/18 Plug : ■ N = Non sealing ■ Z = Not applicable Cable mounted : O-ring material ■ Not applicable = Nothing Receptacle : Locking system O-ring at plug interface Cable mounted plug : ■ E = Standard (FVMQ) ■ L = Push-pull lockingULTIMATE ■ Q = Quick release Keying code ■ Code 3 = ■ Cable mounted receptacle : ■ Code 1 = ● ■ Code 4 = ✖ ■ Z = Not applicable ■ Code 2 = ▼ Standard guide mark = White Panel mounted : Standard keying = Code 1 ■ Size 11 : 008, 012, 016, 019 ■ No locking = Nothing ■ Size 13 : 027 Connector size Housing color ■ Size 18 : 042 ■ 07 = Size 07 ■ BK = Standard (Anthracite) ■ 08 = Size 08 ■ 11 = Size 11 Contact Type ■ 13 = Size 13 ■ S = Solder ■ 18 = Size 18 ■ P = PCB ■ C = Crimp Technical Specifications Number of contacts 002 to 042 Available contacts per size : ■ Size 07 : 002, 003, 004, 005, 007, 009, 010 ■ Size 08 : 002, 003, 004, 005, 007, 009 Polarity contacts ■ M = Male contacts ■ F = Female contacts Standard polarity : male contacts in plug, female contacts in receptacle H  16

Accessories FISCHER ULTIMATETM SERIESBEND RELIEF CUTTING DIAMETERSTop performance, no hassle Size Uncut Level 1 Level 2 Level 3 Level 4 Part Number■ No tool required : 5 steps to assemble ø3.9 ø4.9 - UB07 A1BK■ Clean cut : perfectly adjust the bend relief 07 ø1.9 ø2.9 ø5.7 ø7.5 - UB08 A1BK to your cable diameter with a simple blade ø6.9 ø8.9 - UB11 A1BK 08 ø2.5 ø3.7 ø10.9 ø12.9 - UB13 A1BKLong lasting ø10.4 ø11.9 UB18 A1BK■ Resists 10,000 flexes at a 90° angle 11 ø3.9 ø5.4 ø13.9■ Operating temperature -55°C to +135°C■ UV resistant 13 ø6.9 ø8.9 18 ø6.9 ø8.4 LEVEL 4321 ULTIMATEAll dimensions and images shown are in millimeters and are for reference only. H  17

FISCHER ULTIMATETM SERIES Accessories SOFT CAPS - LANYARD WITH CORD FIGURE 1 Crimp ferrule and heat shrink øD1 A ~L ø1 ø1 tube are included. ~L ø1 FIGURE 2 ~LULTIMATE Crimp ferrule and heat shrink øD1 A tube are included. FIGURE 3 Crimp ferrule and heat shrink øD1 A tube are included. H  18 Technical Specifications