Race 2020

|| Gauge Panel Kits • All panels come with LED warning lights, senders and instructions • Panels available with: Stewart Warner Racing, Speedway, Autometer Sport - Comp, Auto Meter Pro-Comp Liquid Filled, Auto Meter Ultra Lite, Pro Comp or Auto Meter Ultra-Nite gauges • Includes an easy-to-hook-up wiring harness • Fuel and oil pressure lines sold separate of panel kits D | THREE-GAUGE PANELS WITH FUEL PRESSURE --Oil pressure 0-100 psi --Fuel Pressure 1-15 psi --Water temp. 100-265°F Stewart Warner, 140-280°F Auto Meter, 100-280°F Speedway 913-65434 SPEEDWAY (GAUGES SHOWN ABOVE) $13999 EA A | TWO-GAUGE PANELS 913-65444 STEWART WARNER 23999 EA --Oil pressure 0-100 psi 913-65448 AUTO METER SPORT-COMP 27999 EA --Water temp. 100-265°F Stewart Warner, 913-65458 AUTO METER LIQUID FILLED 37999 EA 140-280°F Auto Meter, 100-280°F Speedway 913-65468 AUTO METER ULTRA-LITE 33999 EA 913-65430 SPEEDWAY 913-65478 AUTO METER ULTRA-NITE 35999 EA 913-65440 STEWART WARNER (GAUGES SHOWN ABOVE) 913-65446 AUTO METER SPORT-COMP 913-65456 AUTO METER LIQUID FILLED $8999 EA 913-65466 AUTO METER ULTRA-LITE 15999 EA 913-65476 AUTO METER ULTRA-NITE 19999 EA 25999 EA 22499 EA 24999 EA E | ELITE WATERPROOF B | THREE-GAUGE PANELS GAUGE SET PANEL WITH OIL TEMPERATURE --New waterproof design eliminates the need to remove --Oil pressure 0-100 psi gauges before you wash your car --Oil temperature 140-325°F --LED backlit numbers and illuminated pointers --Water temp. 100-265°F Stewart Warner, 140-280°F Auto Meter, --Custom set your warnings and brightness 100-280°F Speedway --Backlight changes color based on the warning --Panels are completely wired and ready for quick installation --All sensors are included --Approved in most sanctioning bodies, including IMCA 475-44573 3 GAUGE PANEL - OP/WT/FP WITH TACH $58999 EA 913-65432 SPEEDWAY $15999 EA 913-65443 STEWART WARNER 25999 EA 913-65447 AUTO METER SPORT-COMP 34999 EA 913-65457 AUTO METER LIQUID FILLED 44999 EA 913-65467 AUTO METER ULTRA-LITE (GAUGES SHOWN ABOVE) 37999 EA 913-65477 AUTO METER ULTRA-NITE 40999 EA F | GAUGE KITS C | IMCA MODIFIED FIBERGLASS 4-GAUGE DASH PANELS --Stewart-Warner – kit includes 21/16” standard oil pressure 0-100 psi and 100° F-250° F water temperature gauges --33” wide and 9” deep --Speedway – kit includes 25/8” standard oil pressure 0-100 --Designed to fit four 25⁄8” gauges and a tachometer in the middle pressure and 100° F-280° F water temperature gauges --Available in Black and White --Both kits include an aluminum gauge panel 940-8300 STEWART WARNER $9799 KIT 910-54061 $9499 EA 940-8301 SPEEDWAY (SHOWN) 4499 KIT 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 299

ELECTRICAL || Gauges and Tachometers YOU GET A CHROME BEZELED GAUGE AND TWO SNAP-ON GAUGE BEZELS IN BLACK AND SILVER! A | 25⁄8\" GAUGES --Lightweight 25⁄8” Speedway Motors gauges feature a chrome bezel, but we have included two snap on bezels in black and silver that allow you to customize your panel --The backlit, white face makes these gauges easy to read --Also included with the gauge is a mounting bracket with all the necessary hardware and complete installation instructions OIL PRESSURE WATER TEMPERATURE OIL TEMPERATURE FUEL PRESSURE 1 910-65013 0-100 PSI $2499 EA 2 910-65016 100°-280°F $2499 EA 3 910-65019 100°-280°F $2499 EA 4 910-65011 0-15 PSI $2499 EA B | TACHOMETERS ­ DESCRIPTION MEMORY IGNITION MAX. RPM SHOWN WATER PRICE PART # FACE SIZE SWITCH TYPE RESISTANT $33995 EA 1 182-6601 AUTO METER PRO COMP 33⁄4” REMOTE STD/ELECT 10000 YES 35995 EA 2 182-6801** AUTO METER PRO COMP (IN DASH) 5” YES 31995 EA 3 182-6809 AUTO METER PRO COMP (PEDESTAL) 5” FACE MOUNT STD/ELECT 10000 YES 7499 EA YES 37995 EA 4 182-2301* AUTO METER AUTOGAGE FACE MOUNT STD/ELECT 9000 YES 18999 EA YES 18999 EA 5 182-4594 AUTO METER ULTRA NITE 33⁄4” - STD/ELECT 8000 YES 32999 EA YES 21999 EA 6 475-44381 ACCUTECH SMI SILVER 5” REMOTE STD/ELECT 10000 YES 18999 EA YES 41⁄2” FACE MOUNT STD/ELECT 10000 475-44384 ACCUTECH SMI BLACK 41⁄2” FACE MOUNT STD/ELECT 10000 7 475-44591 LONGACRE STEPPER MOTOR - DATA LOG 4” 8 475-44477 LONGACRE STEPPER MOTOR MEMORY 41⁄2” FACE MOUNT STD/ELECT 10000 FACE MOUNT STD/ELECT 10000 475-46747 LONGACRE ELITE WATERPROOF 25⁄8” FACE MOUNT STD/ELECT 10000 * AUTO GAUGE SERIES TACHOMETER, CHROME BEZEL ** NO MOUNT BRACKET. DESIGNED FOR IN-DASH MOUNTING C | TACH ADAPTER E | VTAC FOR MAGNETOS TACHOMETER --Requires a 12V power source --Records two high and two low RPMs per lap --Displays RPMs while racing 182-9118 $9795 EA --Works with 4, 6 or 8 cylinder engines with magneto’s or standard ignitions D | TEL TAC TACHOMETER 910-82028 TACHOMETER $42999 EA --Self-contained digital tach features built-in memory 910-82036 EXTRA MOUNTING SLIDE BRACKET 12499 EA recall in a compact 31⁄8” x 31⁄8” square case 910-82037 EXTRA TACHOMETER CABLE 4499 EA --Extremely rugged construction allows it to perform in almost any racing environment F | XTREME ACCU-TACH --Tel Tac II recalls and displays the highest overall rpm for up to 30 minutes after the car is shut off --Works with 4, 6 and 8 cylinder engines using --Works on 4, 6 and 8 cylinder engines with either an MSD ignition or a magneto magnetos or distributors --Factory set for 8 cylinder engines and will function up to 15,000 rpm 910-82020 TEL TAC II $30499 EA 910-11781 $36999 EA 910-82030 TEL TAC OVAL TRACK PRO 42499 EA 910-82021 HARNESS WITH ISOLATER 2899 EA 300 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Gauges A | ELITE WATERPROOF GAUGE SET PANELS --New waterproof design eliminates the need to remove --Backlight changes color based on the warning gauges before you wash your car --Panels are completely wired and ready for quick installation --LED backlit numbers and illuminated pointers --All sensors are included --Custom set your warnings and brightness --Approved in most sanctioning bodies, including IMCA WATERPROOF SMI GAUGES WATERPROOF LED GAUGES 1 475-46744 4 475-46860 2 475-46745 WATER TEMP WITH SENSOR $13999 EA 5 475-46861 WATER TEMP WITH SENSOR $13999 EA OIL TEMP WITH SENSOR 13999 EA OIL TEMP WITH SENSOR 13999 EA 17999 EA 17999 EA 475-46741 OIL PRESSURE WITH SENSOR 17999 EA 475-46857 OIL PRESSURE WITH SENSOR 17999 EA 3 475-46742 17999 EA 6 475-46858 11999 EA 0-15 FUEL PRESSURE WITH SENSOR 13999 EA 0-15 FUEL PRESSURE WITH SENSOR 11999 EA 475-46743 0-100 FUEL PRESSURE WITH SENSOR 475-46862 0-100 FUEL PRESSURE WITH SENSOR 475-46748 0-60 WATER PRESSURE WITH SENSOR 475-46746 8-18 VOLT GAUGE E | SPORT-COMP MECHANICAL 21⁄16\" GAUGES B | AUTOGAUGE SERIES MEMORY TACHOMETER --Using a patented, high precision bourdon tube meter movement, there isn’t another gauge on the market that can lay claim to the --10,000 RPM level of accuracy or durability you’ll find here --Pedestal mount --Face mount memory switch --Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12V high performance racing ignitions 182-33902 5\" DIAMETER $19899 EA 1 182-3311 FUEL PRESSURE GAUGE - 0-15 PSI $7495 EA C | AUTO GAGE 2 182-3312 FUEL PRESSURE GAUGE - 0-100 PSI AIR-CORE PEDESTAL 3 182-3321 OIL PRESSURE GAUGE - 0-100 PSI 7495 EA TACHOMETER GAUGE 4 182-3332 WATER TEMPERATURE GAUGE -120°-240°F 7795 EA 10295 EA --10,000 RPM --Pedestal mount F | STEWART --White incandescent $18899 EA WARNER 182-233904 5\" DIAMETER --Mechanical 21⁄16” gauges $3999 EA --Nests in tight confines 5499 EA --Chrome bezels with black face 799 EA --36” lead for water temperature 1 665-82209 STANDARD OIL PRESSURE 0-100 PSI 4499 EA 665-82236 STANDARD WATER TEMPERATURE, 100° F-250° F 4999 EA 940-8362 21⁄16\" GAUGE PANEL 5399 EA 665-82326 DELUXE WATER TEMPERATURE, 100° F-265° F 2 665-82323 DELUXE OIL PRESSURE 5-100 PSI 665-82320 DELUXE FUEL PRESSURE 2-30 PSI G | DASHBOARD D | ULTRA-LITE II GAUGE GROMMET SEAL MECHANICAL 21⁄16\" GAUGES --Gauge grommet will dampen vibration --Using a patented, high precision bourdon tube meter movement, and increase gauge lifeChrome bezels with black face there isn’t another gauge on the market that can lay claim to the levelof accuracy or durability you’ll find here --Features Hi-Def through-the-dial white LED lighting --Includes gauge mounting hardware and installation instructions 910-206225 21⁄16\" $1199 EA 1 182-4921 OIL PRESSURE GAUGE - 0-100 PSI $9295 EA 910-260275 25⁄8\" 1299 EA 2 182-4931 WATER TEMPERATURE GAUGE -140°-280°F 12295 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 301

ELECTRICAL || Gauges and Tachometers C | LED WARNING LIGHT KITS --Shows problem before it becomes a hazard --Easy-to-install LEDs in standard 3⁄4” or 1” STANDARD 3⁄4” OR 1” 3⁄4” PRICE 1” PRICE 604-50606 230° WATER TEMPERATURE (AMBER) $2999 EA $3599 EA 604-50608 270° OIL TEMPERATURE (BLUE) 3299 EA 1999 EA Individual gauges 604-50600 20 LB. OIL PRESSURE (RED) 2299 EA 2999 EA do not come with sending units 604-50604 ADJUSTABLE OIL PRESSURE (RED) 2999 EA 3499 EA A | LARGE 25⁄8\" 604-50610 FUEL PRESSURE (WHITE) 2999 EA 1999 EA MECHANICAL RACING GAUGES OIL PRESSURE GAUGE D | REPLACEMENT LED WARNING LIGHTS/SENDERS --25⁄8” diameter stainless steel bezel --Available in red, white, blue or amber --Requires tubing kit 1 665-82406 5-100 PSI 604-50-COLOR STANDARD LED 3/4” LIGHT $599 EA 665-82553 TUBING KIT 604-52-COLOR MONSTER LED 1” LIGHT 1299 EA WATER TEMP GAUGE 1699 UP 604-51 REPLACEMENT SENDERS (SPECIFY) --25⁄8” diameter stainless steel bezel --Specify 60” or 72” capillary tube $5499 EA E | GAGELITES ENGINE 2 665-82409 100°-265°F 799 EA WARNING LIGHT SYSTEM OIL TEMPERATURE GAUGE $6999 EA --Kit includes sender, lights, wire and terminals --25⁄8” diameter stainless steel bezel $7999 EA OIL PRESSURE OIL PRESSURE - SENDER ONLY --With 72” capillary tube 475-40000 20 PSI 475-43080 20 PSI 3 665-82410 140°-325°F $5499 EA $2499 EA $2999 EA 1999 EA FUEL PRESSURE GAUGE 475-40100 ADJ. 15-50 PSI 3999 EA 475-43000 ADJ. 15-50 PSI 2999 EA WATER TEMPERATURE WATER TEMPERATURE - SENDER ONLY --25⁄8” diameter stainless steel bezel 475-40150 1⁄2” 230 475-43250 1⁄2” 230 --Requires braided stainless hose 2499 EA 1999 EA 4 665-82405 1-15 PSI 617-4060 HOSE KIT 475-40152 3⁄8” 230 2499 EA 475-43252 3⁄8” 230 2499 EA VACUUM GAUGE OIL TEMPERATURE OIL TEMPERATURE - SENDER ONLY 475-40350 1⁄2” 270 475-43350 1⁄2” 270 --25⁄8” diameter stainless steel bezel 2999 EA 1999 EA --Requires tubing kit 5 665-82411 2-30 IN. MECHANICAL 475-40400 1⁄2” 300 2999 EA 475-43400 1⁄2” 300 1999 EA 665-82553 TUBING KIT FUEL PRESSURE FUEL PRESSURE - SENDER ONLY 475-40250 ADJ. 2-7 PSI 3499 EA 475-43020 ADJ. 2-7 PSI 2499 EA 475-40251 4 PSI 2999 EA 475-43021 4 PSI 1499 EA WATER PRESSURE WATER PRESSURE - SENDER ONLY 475-40141 475-43241 2999 EA 1999 EA F | BRAIDED PRESSURE GAUGE LINE KIT --Kit Includes one AN 4 to 1⁄8” NPT male fitting, one AN 4 to 1⁄8” NPT female fitting and choice of 25”, 36” or 48” long AN braided line 617-4060-SPECIFY $1999 EA $6499 EA G | ANODIZED ALUMINUM FLARE 799 EA --Adapts 1⁄8” NPT male to AN 4 617-6042 STRAIGHT $499 EA 617-6080 90° 999 EA H | OIL PRESSURE GAUGE EXTENDED FITTINGS --Straight or 90°, 1/8” NPT to AN 4 617-4070 STRAIGHT $1399 EA 21⁄4\" 213⁄16\" 617-4075 90° 2499 EA B | VIPER PIPES J | GAUGE FITTINGS 1100R DIGITAL TACHOMETER --Female 1⁄8” NPT to either AN 3 or AN 4 --Now for V8 applications with distributors --Straight or 90° Fit Auto Meter and Stewart Warner --Digital read-out of RPMs (configurable 0-9,000 or 0- 20,000 RPMs) --Bar Graph Read=out (0-9,000 or 0 -20,000 RPMs) 617-4028 STRAIGHT AN 3 1⁄8” NPT $799 EA --Programmable shift or RPM warning light 617-4025 STRAIGHT AN 4 1⁄8” NPT 399 EA --Digital water temperature read-out (Farenheit or Celcius) --Programmable water temperature warning light 617-4072 90° AN 4 1⁄8” NPT 499 EA --Battery voltage monitor --Shows the 5 highest RPMs for the session K | AUTO METER WATER TEMP GAUGE ADAPTORS --For all mechanical water temperature gauges 182-2271 3⁄8” NPT LONG $1795 EA 182-2272 182-2370 3⁄8” NPT ALUMINUM 1495 EA 1499 EA 182-2372 3⁄8” NPT 182-2273 960-11000 $13999 EA 1⁄2” NPT 1499 EA 1⁄2” NPT ALUMINUM 1395 EA 302 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Gauges and Tachometers Individual Individual gauges do gauges do not come with not come with sending units sending units D | 25⁄8\" SPORT-COMP GAUGES A | 25⁄8\" ULTRA-NITE OIL PRESSURE WATER TEMP GAUGES-GLOW-IN-THE-DARK - 1⁄8” NPT male fitting on back --Includes 6’ capillary tube for line hook-up --and 1⁄2” NPT fitting --Rugged mechanical movements, lightweight design --Glow-in-the-dark dials 1 182-3421 0-100 PSI $7995 EA 2 182-3431 140°-280°F $10795 EA --Waterproof $8495 EA 617-4060 HOSE KIT 1999 KIT 2 182-3432 120°-240°F 10795 EA 1999 KIT OIL PRESSURE FUEL PRESSURE $12495 EA --Has 1⁄8” NPT male fitting on back for line hook-up 12295 EA --Must use braided stainless line 1 182-4521 0-100 PSI $12795 EA 3 182-3411 0-15 PSI $7795 EA 617-4060 HOSE KIT 617-4060 HOSE KIT 1999 KIT $8495 EA WATER TEMPERATURE 1999 KIT Individual gauges do --Includes 3’ or 6’ capillary tube and 1⁄2” NPT fitting not come with --140°-280° sending units 2 182-4535 4’ CAPILLARY TUBE 2 182-4531 6’ CAPILLARY TUBE OIL TEMPERATURE --Includes 6’ capillary tube and 1⁄2” NPT fitting 3 182-4541 140°-280°F FUEL PRESSURE 4 182-4511 0-15 PSI 617-4060 HOSE KIT --E | 25⁄8\" PRO-COMP Individual ULTRA-LITE GAUGES gauges do not come with --Easy-to-read silver dials and high-contrast orange pointers with sending units aluminum and plastic construction OIL PRESSURE WATER TEMP --Has 1⁄8” NPT male fitting on --Includes 6’ capillary tube back for line hook-up -- 1⁄2” NPT fitting 1 182-4421 0-100 PSI $8495 EA 2 182-4431 140°-280°F $11795 EA B | 25⁄8\" PRO-COMP LIQUID FILLED GAUGES 617-4060 HOSE KIT 1999 KIT FUEL PRESSURE --The most rugged gauges available OIL TEMPERATURE --Designed for racing applications with extreme vibrations --Must use braided stainless or violent pounding --Includes 6’ capillary tube line #617-4060 -- 1⁄2” NPT fitting 3 182-4441 140°-280°F $11795 EA 4 182-4411 0-15 PSI $7995 EA OIL PRESSURE WATER TEMP 617-4060 HOSE KIT 1999 KIT --Has 1⁄8” NPT male fitting on --Includes 6’ capillary tube back for line hook-up and 1⁄2” NPT fitting 2 182-5431 140°-280°F $14295 EA 1 182-5421 0-100 PSI $10295 EA 2 182-5432 120°-240°F 14295 EA 1 182-5422 0-200 PSI 10295 EA 617-4060 HOSE KIT 1999 EA F | LS SWAP OIL TEMPERATURE FUEL PRESSURE GAUGE ADAPTERS --Includes 6’ capillary tube --Must use braided stainless and 1⁄2” NPT fitting line #617-4060 --Workss with --Mounting cup fits all liquid --Isolator required if mounting LS platform engines filled gauges fuel pressure gauge inside car OIL PRESSURE SPEEDWAY - 16MM X 1⁄8 NPT $1299 EA 3 182-5441 140°-280°F $14295 EA 4 182-5411 0-15 PSI $10495 EA 916-80918 AUTO METER - SENDER ADAPTER 1495 EA 3 182-5202 MOUNT - BLACK 2895 EA 617-4060 HOSE KIT 1999 KIT 182-2268 $1299 EA COOLANT SPEEDWAY - 12MM X 1⁄2 NPT 1299 EA C | ACCUTECH 25⁄8\" OIL 916-80918 SPEEDWAY - 12MM X 1⁄8 NPT - SHORT 1299 EA PRESSURE GAUGE SPEEDWAY - 12MM X 1⁄8 NPT - LONG 1495 EA 916-80919 475-46510 0-100 PSI – ACCUTECH $2399 EA 916-80920 AUTO METER - SENDER ADAPTER 182-2277 Individual gauges do not come with sending units 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 303

ELECTRICAL || Switches and Components A | ALUMINUM F | WEATHERPROOF $1999 EA M | SELF ADJUSTING FLIP-UP STARTER BUTTON WIRE STRIPPER IGNITION START PANEL --Completely sealed with a --Automatically adjusts polyurethane coating to strip 24-10 AWG --40 amp at 12 volts ignition switch with 475-45466 wire and cable aircraft style cover and pilot light --Crimps 22-10 AWG insulated andnon-insulated wire terminals --Crimps 7-8mm ignition terminals --Wire cutter --Comfortable TPR hand grips 475-44863 $4499 EA 728-11475 $2199 EA B | ALUMINUM FLIP-UP G | WEATHERPROOF N | RACHETING WIRE IGNITION SWITCH PANEL STARTER BUTTON TERMINAL CRIMPER --40 amp at 12 volts ignition switch with --Push button with weatherproof rubber --Racheting mechanism design aircraft style cover and pilot light cover and 2 terminals --Adjustable crimping compression --Steel jaw 475-45460 $1499 EA --Color coded wire sizes: Red 22-18AWG-DIN 0.5-1.0mm 475-44869 $9999 EA H | BATTERY Blue 16-14AWG-DIN 1.5-2.5mm THRU PANEL Yellow 12-10AWG-DIN 4-6mm --For safely running battery 728-11477 $2199 EA --cable thru your firewall --Prevents shorts $1499 EA 475-45700 C | ALUMINUM FLIP-UP P | FLIP-UP COVER --Aircraft safety switch cover only START / IGNITION PANEL 475-45370 $1499 EA WITH BATTERY DISCONNECT --40 amp at 12 volts ignition switch with aircraft style cover and pilot light J | BATTERY JUMPER 475-44871 $7999 EA POST - RED / POSITIVE Q | IGNITION SWITCH --Make it easier to jump start or W/ FLIP-UP COVER charge the battery --Heavy Duty 40 Amp Switches 475-45720 $1999 EA --Aircraft safety switch cover and 2 terminals D | CARBON 475-45470 $1999 EA FIBER FLIP-UP K | BATTERY R | WEATHERPROOF $499 EA START AND JUMPER SWITCH COVER IGNITION SWITCH PANEL POST - BLACK / NEGATIVE --Silicone rubber --High capacity ignition switch --Make it easier to jump start or 475-45300 with aircraft style cover charge the battery 475-44510 $5999 EA 475-45740 $1999 EA S | 40-AMP ELECTRIC E | CARBON RELAY KIT FIBER FLIP-UP START AND L | HEAVY DUTY IGNITION SWITCH PANEL GROUND STRAP --Use this handy 40 amp --High capacity ignition switch --Braided - 14” long - to complete relay to wire up your 12 volt horn, the installation electric fuel pump, electric fan with sensor, with aircraft style cover shaved door handles, or whatever --Contains relay, plug, wire, and instructions 475-44535 $8999 EA 475-48110 $1999 EA 910-64044 $999 EA 304 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Switches and Fittings K | AUTOMETER A | PUSH BUTTON 11⁄2\" HI-VIBRATION STARTER PRESSURE GAUGE --Rubber boot protects button --Made to mount directly on the from moisture engine to read fuel or oil pressure -- 1⁄8” NPT male fitting 913-64381 $599 EA 182-2175 0-15 PSI $4299 EA B | DOUBLE 182-2177 0-100 PSI 4499 EA THROW SWITCH --Single pole, double throw L | REMOTE 1 910-64015 ON/ON $999 EA PRESSURE GAUGE 2 910-64016 ON/OFF/ON 999 EA --Remotely mount this gauge under the C | TOGGLE “IGNITION hood to help set the correct fuel pressure ON” SWITCH --Reads from 0-15 psi Features a 13⁄4” face --and a 1⁄8” NPT fitting --Works great as a kill switch or with other auxiliary equipment 910-11851 $1499 EA --Comes with rubber boot 913-64380 ON/OFF $999 EA M | STAINLESS STEEL 475-45420 LONGACRE - 40 AMP 1499 EA FUEL PRESSURE GAUGE D | SAFETY KILL SWITCH --Liquid-filled, high-quality 13⁄4” gauge --Reads from 0-15 psi --Water resistant -- 1⁄8” NPT connection --Pull on, push off --Silver contacts 910-11852 $2299 EA --O-ring shaft seal --20 amp --Standard ignition only 913-64384 $1999 EA N | FUEL PRESSURE E | MAGNETO KILL 0-15 PSI GAUGE SWITCH --Fuel Pressure At A Glance --Designed for dirt racing --Easy To Read --Silver contacts, a sealed back --0 To 15 PSI and a 23 amp rating --Fuel Pressure Gauge 940-5582 $1299 EA 2 SWITCH 425-100195ERL 0-15 PSI $1904 EA F | AFCO SWITCH PANELS 425-100189ERL 0-15 PSI – LIQUID FILLED 2944 EA FOR STD IGNITIONS P | LOW PRESSURE IGNITION 106-85011B 1 SWITCH/START WITH LIGHTS $7999 EA OR ELECTRIC FUEL PUMP SHUT-OFF SWITCH G | KEEP IT CLEAN SWITCH PANEL --Shuts off the ignition or electric fuel pump when oil pressure drops below 12 psi --Push button start --Prevents engine damage, fires, and keeps the --Battery kill switch motor from starting until the oil pressure rises --3 Heavy duty accessory --Should be used with momentary bypass switch toggle switches with cover --Aluminum mounting plate 604-4360 PRESSURE SWITCH $2999 EA --Indicator lights 910-29085 $7499 EA Q | INLINE FUEL H | STARTER PANEL PRESSURE ADAPTER --Panel 25⁄8” x 41⁄2” --Use for inline pressure gauge --Includes 14 gauge wire --Great for fuel log, pump or regulator --Starts by flipping a switch, pushing the button 617-7000 AN 6 TO AN 6 WITH 1⁄8” NPT PORT $1199 EA AN 8 TO AN 8 WITH 1⁄8” NPT PORT 913-64385 $1999 EA 617-7001 AN 6 TO 3⁄8” NPT WITH 1⁄8” NPT PORT 1499 EA 617-7005 AN 8 TO 3⁄8” NPT WITH 1⁄8” NPT PORT 1199 EA 617-7008 1499 EA R | REMOTE J | IGNITION SWITCH STARTER SOLENOID --Panel mount switch --Eliminates solenoid failure on starter --Acc / off / on start positions --Rated at 20 amp 910-64043 $2499 EA 910-12209 $4499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 305

ELECTRICAL || Battery Components A | HD STARTER H | BATTERY SOLENOID DISCONNECT SWITCH --High capacity --A quick twist of the non-slip --Extra heavy duty metal case handle shuts off all electrical current --Continuous rating: 80-100A to the electric fuel pump, electric water pump, ignition, instruments, etc. --Maximum current, make: 150A 475-45900 $2999 EA 545-74100 125 AMP $3999 EA 175 AMP EA 545-74101 300 AMP - HEAVY DUTY 4499 EA 545-74102 6999 B | REMOTE J | BATTERY BATTERY DISCONNECT TERMINALS SWITCHES --Allows for fast --For safety and theft protection convenient charging --Rated 180 amp continuous, 1000 amp instantaneous 910-64500 TWO-POST $1999 EA 910-64501 FOUR-POST - USE WITH ALTERNATOR 2499 EA 1 698-21504 REMOTE BATTERY TERMINAL $1999 PR K | BATTERY 2 910-12528 MOUNT - PLAIN 1499 EA DISCONNECT SWITCH MOUNT - BLACK 1999 EA 910-12529 MOUNT - STAINLESS STEEL 2499 EA --Shut off entire electrical system in 910-12530 an emergency with a quick ‘hit’ $899 EA --150 amp continuous rating C | BATTERY CABLE 899 EA --1000 amps intermittant - max voltage 48 volts $2999 EA BULKHEAD CONNECTOR 1 475-45749 PUSH PULL BATTERY DISCONNECT SWITCH 2999 EA --Allows you to run your battery cable 475-45750 BATTERY DISCONNECT SWITCH - 2 TERMINAL 3499 EA through a firewall the right way 475-45780 BATTERY DISCONNECT SWITCH - 4 TERMINAL 4999 EA --Utilizes heavy duty 3⁄8” x 16 brass terminals 4999 EA --Requires a 11⁄4” hole 2 475-45753 WEATHERPROOF BATTERY DISCONNECT SWITCH - 2 TERMINAL 6999 EA 475-45788 WEATHERPROOF BATTERY DISCONNECT SWITCH - 4 TERMINAL 8999 EA 910-64018 BLACK 475-45782 HIGH CAPACITY BATTERY DISCONNECT - 4 TERMINAL 910-64010 RED 475-45789 WEATHERPROOF HIGH CAPACITY BATTERY DISC. - 4 TERMINAL D | REMOTE BATTERY STUD --200 amp rated --Works well to establish remote battery L | BRAIDED GROUNDING STRAP power in applications where multiple --8”, 14” or 18” long --Tin coated copper accessories need battery power --1” wide --4-gauge --Red to identify battery power, black to establish system wide ground back to the battery 698-20308 8” $899 EA --Ideal for fiberglass bodies 14” 698-20314 18” 999 EA 910-6288-RED RED $2199 EA 698-20318 1099 EA 2199 EA 910-6288-BLK BLACK E | TOP POST BATTERY M | COMPOUND ACTION DISCONNECT SWITCH ELECTRIC CABLE CUTTERS --10” overall length 910-64503 $799 EA --Compound leverage increases cutting power while reducing cutting effort F | BATTERY CABLE --New quick and simple spring-free automatic latch design TERMINAL END (one hand release) provides safety and convenience --Cuts copper and aluminum electric cable up to 2AWG or 1⁄2” diameter 910-64504 728-11470 $1999 EA G | ECONOMY BATTERY $499 EA N | REMOTE MASTER DISCONNECT $1099 EA DISCONNECT KIT SWITCH --Can be hidden in the vehicle as an anti-theft deterrent by --Durable two-post plastic switch switching the battery power flow MADE IN with removable red key from the battery to the fuse block 910-64502 --12 volts - 2 positions   master disconnect 306 SpeedwayMotors.com 910-30204 $9499 KIT SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

NEGATIVE || Battery Components NEGATIVE POSITIVE A | QUICKFLEX BATTERY POSITIVE CABLE --Welding cable has always been preferred by chassis builders to use for battery cables --Made with very fine copper wire and F | FLAG POST insulated with synthetic rubber 2-GAUGE WIRE E | RIGHT, LEFT OR CENTER --More flexible than battery cable, especially ELBOW TERMINAL in cold temperatures, and is easier to --Allows you to use 2 negative/positive route into tight spaces battery cables on one battery post --Will help give direction to your battery cable --2ga Sold in 10’, 25’ lengths --Set-up to be used with common 2-gauge --Made to be used with 2-gauge battery cable --100% copper cable for maximum conductivity battery cable wire --Crimp on or solder --Crimp on or solder 910-4002-SPECIFY CENTER $699 EA BLACK CABLE 910-4302-NEG NEGATIVE FLAG TERM $1099 EA RIGHT 910-20210 10 FOOT $2999 EA 910-4102-SPECIFY LEFT 899 EA 910-20225 25 FOOT 5999 EA 910-4302-POS POSITIVE FLAG TERM 1099 EA 910-4202-SPECIFY 2GA SOLDER PELLETS 899 EA RED CABLE 899 PK 910-0621C 899 PK 910-0621C 2GA SOLDER PELLETS 910-22210 10 FOOT $2999 EA 910-22225 25 FOOT 5999 EA G | BATTERY CABLE B | 18’ BATTERY CABLE ACCESSORIES --Two-gauge standard copper --Compression fitting 2 gauge wire with ends --Simple twist & screw connection --2’ long black negative cable 1 698-21405 TOP POST BAT END - 2 PK $1999 EA 910-64505 SPEEDWAY $6499 EA 2 698-21409 TERMINAL END 3⁄8\" HOLE - 2 PK SPEEDWAY POST 1999 EA 910-5102-SPECIFY SPEEDWAY TERMINAL END 3⁄8\" HOLE 899 EA 910-5802 699 EA H | HAMMER STYLE CRIMPER 910-64111 CRIMPER $3999 EA J | BATTERY CABLE ENDS --Tubular copper battery cable ends with ring-style lugs 910-22516 2 GAUGE - 5⁄16\" HOLE $1499 BAG/10 C | LIGHTWEIGHT --Battery clamps 2 GAUGE - 3⁄8\" HOLE BAG/10 RACING CABLE KITS --Grommets 910-22388 1/0 GAUGE - 3⁄8\" HOLE 1499 BAG/10 --Wire clamps 910-10388 1799 --2AWG XP Flex, red power cable --Self-tapping screws --2AWG XP Flex, black ground cable K | BATTERY TERMINAL --Heat shrink PROTECTOR COVER --2AWG crimp terminals --Battery terminal protector 910-64507 SINGLE BATTERY - 16 FT. RED, 3 FT. BLACK $8999 KT --Improve the appearance of your battery connections 910-64508 DUAL BATTERY - 22 FT. RED, 6 FT. BLACK 12999 KT --Protect against corrosion and shorting 910-57242 BLACK $299 EA 910-57241 RED 299 EA L | 16V-12V $14999 EA D | DELUXE STEP DOWN BOX RACING BATTERY --Allows you to run 12 volt CABLE KIT accessories without burning them out 910-993 --133 strand 1/0 pre-cut cables for entire system --Battery cable provided is 12.5 ft in length M | MEGA FUSE KIT $1800 EA 475-48115 $17999 EA --175 amperage 910-500689 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 307

ELECTRICAL || Batteries and Boxes A | 12 AND 16 VOLT F | PRO SERIES BATTERY CHARGER BATTERY CHARGER AND ENGINE STARTER --12V and 16V AGM compatible --Battery Type: Standard AGM Gel Deep-Cycle --25A max output --Input Voltage: 120V AC --Three charging modes --Input Current: 11A cont/50A int --LED indicators and ammeter to monitor status --Output Voltage: 6/12V --6’ heavy duty cables w/ clamps --Output Current: 6/12V: 50A int, 6A; 125/250A int --Built in cooling fan for reliability --Dimensions: 11.88 × 16 × 24 in --Compact size, only 24 lbs. --Weight: 33.05 lb --Constant Current / Constant Voltage 910-1005 $33499 EA 690-DSR131 $18999 EA B | ALUMINUM G | FULLY AUTOMATIC $7999 EA BATTERY BOX BATTERY CHARGER AND ENGINE STARTER --Complies with NHRA Rule 8:1 --Fits most battery sizes --Battery Type: Standard AGM --3 piece .040\" aluminum box design --Input Voltage: 120V AC --Hard mounts battery to the frame --Input Current: 2.2A --Heavy duty one-piece welded battery --Output Voltage: 12V --3 sizes to choose from --Output Current: 6<>2A/10A cont, 50A int --Dimensions: 5.5 × 11.13 × 10.5 in 698-48100 131⁄2\" X 91⁄2\" X 10\" 8999 EA --Weight: 10.5 lb 111⁄4\" X 91⁄2\" X 83⁄4\" 9299 EA 690-SC1361 698-48200 91⁄2\" X 81⁄4\" X 73⁄4\" 9199 EA 698-48300 $8499 EA C | SEALED H | CTEK BATTERY BOX BATTERY CHARGERS --Inside dimensions are 11” long, 81⁄2” wide and 9” tall --The compact .80 amp --Include hardware CTEK US800 charger is perfect to permanently needed for installation connect to your battery to keep it maintained --Available in Red or Black --The MXS 5.0 offers a unique eight step approach to battery care 458-700-COLOR --Features capabilities for improved charging in all weather STANDARD DELUXE 910-40206 MXS 5.0 BATTERY CHARGER $9899 EA MOUNT MOUNT 910-56159 US7002 BATTERY CHARGER 7\" X 33⁄4\" X 2\" 15399 EA D | BILLET BATTERY MOUNTS J | BATTERY BOX ADJUSTABLE 916-66600-PLN STANDARD MOUNT - 910-66411 AND 910-66412 - PLAIN $8999 EA 8999 EA --10.75\" x 9.75\" x 17.5\" 916-66600-POL STANDARD MOUNT - 910-66411 AND 910-66412 - POLISHED --Group 24-31 $1199 EA 9799 EA --Locking lid 916-66601-PLN DELUXE MOUNT - 910-66411 AND 910-66412 - PLAIN 9799 EA --Includes adjustable divider for perfect fit B-PC680 --Effectively collects electrolytes $11299 EA 6499 EA and ventilates 12899 EA 6499 EA 910-00300 BATTERY BOX 14099 EA 18799 EA 916-66601-POL DELUXE MOUNT - 910-66411 AND 910-66412- POLISHED 1499 PR 916-66603 DELUXE MOUNT - 910-66415 BATTERY - PLAIN 916-66604 DELUXE MOUNT - 910-66413 BATTERY - PLAIN K | ODYSSEY BATTERIES --Non-spillable AGM design protects against shock and vibration E | ALUMINUM --Pure lead plates mean twice the A-PC545 BATTERY BOX overall power and three times the --Fits Braille 2015, 2015C, as well life with up to 400 cycles at 80% depth of discharge as Odyssey PC545 batteries --12V with M6 female terminals --Use with accessory clamps to --Requires #131-100 for top post conversion mount on the chassis --7.5” x 4” x 4.5” 1 131-545 150 CCA - 7\" X 3.37\" X 5.17\" - 13 LB. 2 131-680 170 CCA - 7.27\" X 3.11\" X 6.67\" - 16 LB. 950-52083 BATTERY BOX $5999 EA 220 CCA - 6.7\" X 3.9\" X 6.95\" - 13.2 LB. 131-625 330 CCA - 6.64\" X 7.05\" X 5.83\" - 23.8 LB. 910-32866-SPECIFY TUBE CLAMP 1499 EA 131-925 TOP POST 799 EA 131-100 636-1001 REPLACEMENT STRAP 308 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Batteries and Boxes WELD-ON BOLT-IN E | BATTERY BOXES $2199 EA A | BATTERIES 3699 EA --Holds 103⁄4” x 7” battery --Last two to three times --Lightweight steel longer than other batteries --Can be mounted in any direction 916-66006 WELD-ON 916-66007 BOLT-IN 910-66413 LENGTH WIDTH HEIGHT WIDTH 910-66411 STANDARD 910 CA 95⁄16” 613⁄16” 75⁄8” 33.1 LB. $23299 EA 910-66412 910-66415 STANDARD 1000 CA 10” 67⁄8” 713⁄16” 40.2 LB. 23799 EA F | 12 AND 16 VOLT DEEP CYCLE 870 CA 10” 67⁄8” 713⁄16” 43.5 LB. 28199 EA AGM BATTERIES 6 VOLT, 1000 CA 10” 31⁄2” 81⁄4” 18.5 LB. 18799 EA --Compact and easy to install --12 volt deep cycle batteries --16 volt requires step down 12 VOLT DEEP CYCLE / STARTING 913-D680 7.28” L X 6.67” W X 3.19” H - 14 LB. $13999 EA 18999 EA 913-D925 6.5” L X 6.93” W X 4.92” H - 26.63 LB. 19999 EA B | ODYSSEY PERFORMANCE 913-S925 7.0” L X 6.5” W X 5.0” H - 25.270 LB. $33999 EA SERIES BATTERY 16 VOLT STARTING $33999 EA --More overall power and longer 913-1000 33499 EA service life than conventional batteries 10.28” L X 6.75” W X 7.24” H - 30.8 LB. 14999 EA --Packed with pure lead power 16 VOLT DEEP CYCLE 913-D1000 10.24” L X 6.65” W X 7.2” H - 48.18 LB. 910-1005 16V CHARGER 910-993 16V TO 12V STEP-DOWN BOX CA CCA LENGTH WIDTH HEIGHT 131-31800 1188 802 13\" 6.81\" 9.44\" $32999 EA 131-34790 990 792 10.82\" 6.76\" 7.84\" 24999 EA 131-78790 131-65780 760 708 9.46\" 7.01\" 7.98\" 25499 EA G | 12 VOLT AGM 990 792 10.82\" 7\" 7.36\" 25999 EA S SERIES BATTERIES S545 S680 --800 max amps. --1000 max amps. --240 CA --320 CA --25 min. reserve capacity --28 min. reserve capacity --586 and M6 hardware included --586 and M6 hardware included 913-545 6.97” L X 5.14” H X 3.38” W $12999 EA C | BRAILLE NO-WEIGHT 913-680 7.13” L X 6.57” H X 3.03” W 14999 EA BATTERIES H | MINI/MICRO --Same design as braille carbon fiber $19999 EA SPRINT AGM just not in a carbon fiber case 22999 EA BATTERIES 194-2015 425 CCA - 6.8” X 3.4” X 6.1” - 15 LB. 8999 EA --Powerful in cranking AMPs 194-3121 550 CCA - 6.6” X 5.2” X 6.8”- 21 LB. 9499 EA but features a lower AMP hour 194-2018 MOUNT FOR 2015 AND 2015C BATTERY rating due to their small size 194-3118 MOUNT FOR 3121 AND 3121C BATTERY 9999 EA --Comes fully charged and ready to install 194-1232 2 AMP HOUR CHARGER 11999 EA --You must use Antigravity charger to avoid damaging the battery 194-12310 10 AMP HOUR CHARGER 960-801 8 CELL - 240 CCA - 1.75 LBS. - UP TO 750CC $17999 EA D | LITHIUM-ION 12 CELL - 360 CCA - 2.4 LBS. - FOR 1200CC BATTERIES 960-1201 16 CELL - 480 CCA - 3.2 LBS. - FOR 1600CC 21999 EA 960-1601 28999 EA --More power that is lighter, --stronger and more efficient J | BATTERY BOX --Braille's signature cranking power --Over 50% lighter --Aluminum construction --Choose correct size for your battery 194-500 BRAILLE G5 (4.45\" X 2.36\"X 3.39\") 1.4 LBS. 197 PCA $17999 EA --Includes mounting hardware to fasten to BRAILLE G5S (4.45\" X 2.57\" X 3.69\") 2.1 LBS. 346 PCA chassis tabs or sheet metal 194-505 BRAILLE BATTERY G20COMBO LITHIUM BATTERY 29999 EA 194-200 BRAILLE G20 (6.25\" X 2.98\" X 7.1\") 4.5 LBS. 57499 EA 960-12680 ODYSSEY PC 680 $5499 EA 194-201 BRAILLE BATTERY LITHIUM ION CHARGER 52499 EA ODYSSEY PC 545 194-1236 14999 EA 960-12545 YUASA YTX12-BS 5499 EA 960-12831 5499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 309

ELECTRICAL || Switches and Wiring A | WIRING ACCESSORIES F | 8-SWITCH PANEL, NON-FUSED, ROLL BAR MOUNT --This roll bar mounted switch panel is to be used with 910-50001 wire harness --The switches that are included on this switch panel are: start, ignition, electric cooling fan, fuel pump 1, fuel pump 2, electric water pump, lights, accessory 1 FORK SPADES SIZE GAUGE PRICE 910-50202 8-SWITCH PANEL $19999 EA 910-55666 6-32 BLUE 12-10 $1099 100/BOX 910-55674 G | 6-SWITCH LIGHTED 6-32 YELLOW 12-10 1499 100/BOX PANEL, NON-FUSED WITH WIRING 2 BULLET STYLE GAUGE PRICE 100/BOX CONNECTORS MALE 16-14 100/BOX --This heavy-duty panel is 910-55670 FEMALE 16-14 $999 pre-assembled with 910-55671 999 vibration-resistant terminals COLOR GAUGE and 18 feet of TXL wire 3 BUTT BLUE 16-14 PRICE 100/BOX --The panel controls: start, ignition fuel pump, CONNECTORS YELLOW 12-10 100/BOX water pump/fan, two accessories 910-55667 RED 22-16 $1099 100/BOX 910-55668 1799 910-50406 6-SWITCH LIGHTED PANEL $16999 EA 910-55669 1099 $28999 EA H | 8-SWITCH FUSED CONNECTORS PANEL WITH WIRING 4 910-55672 FULLY INSULATED MALE WORKS $1299 100/BOX AND HARDWARE 5 910-55673 WITH 16-14 GAUGE WIRE 1299 100/BOX --Start --Fuel pump FULLY INSULATED FEMALE WORKS --Ignition WITH 16-14 GAUGE WIRE #1 and #2 --Electric fan --Water pump B | VINYL EYELET TERMINALS --Lights --One accessory 6 PART # SIZE GAUGE PRICE 910-50303 8-SWITCH FUSED PANEL 910-55516 5⁄16” HOLE 12-10 $2099 100/BOX 910-55538 J | 6-SWITCH FUSED 3⁄8” HOLE 12-10 2099 100/BOX PANEL WITH WIRING AND HARDWARE C | TERMINAL BLOCKS --Lighted rocker switches are color coded for quick reference 910-64005 4 TERMINALS $599 EA --All of the circuits are individually fused and are easily 8 TERMINALS accessible for quick testing and replacement 910-64006 10 TERMINALS 699 EA 910-64007 799 EA 910-50302 6-SWITCH FUSED PANEL $24999 EA D | HOT SHOT RELAY K | 6-SWITCH ROCKER CIRCUIT BREAKER PANEL --Allows you to turn over the engine from the engine compartment --Features circuit breakers in place of for adjusting valves standard fuses --Also overcomes starting problems --Panel controls: Start, ignition, due to an overheated starter or worn fuel pump, electric fan/water pump out electrical system by boosting amperage and 2 accessories to the starter solenoid every time the vehicle is started 910-50305 6-SWITCH FUSED PANEL $24999 EA 910-64033 HOT SHOT RELAY $4499 EA L | DUAL WALL HEAT SHRINK TUBING KIT $2499 EA --106 pieces in red and black 728-45239 E | 70 AMP RELAY KIT M | BLACK SOLID STATE RELAY --Everything you need to power that big electric fan the right way --4 Channels, 20 Amps each --Includes a 96\" 10-gauge load wire, --Multiple mounting options 72\" signal and feed wires, 60 amp --Activate with power or ground MAXI fuse, holder, terminals and detailed instruction sheet 910-51000 70 AMP RELAY WITH HARNESS $5310 EA 547-75643 $15795 EA 310 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Wiring SEARCH PICO F | SOLDER SEAL A | WEATHERPACK CONNECTORS ELECTRICAL TERMINAL KIT --Water-tight connection --Each number consists of one male and one female component --54 pieces --Assorted solder shrink terminals and crimp and solder shrink butt connectors --Plastic box included 910-55003 $4799 EA G | NYLON 910-12211 1 (2M-2F) $799 SET TERMINAL KIT 910-12212 2 899 SET 910-12213 3 --Nylon Sleeves Terminals 1099 SET --Includes 180 Pieces 910-12214 4 910-0003WS 910-12215 6 1199 SET 1499 SET $3099 EA H | RUBBER INSULATIONS CLAMPS KIT --51 pieces --Rubber construction --Neoprene cushion 910-31318 $2099 EA B | WEATHERPACK TOOLS J | GROMMET SEALS 1 547-8193 DISASSEMBLE $2080 EA 2 547-35051 MSD PRO CRIMP TOOL 9379 EA --Seals-it grommet seals add the well-organized, professional 3 547-3509 WEATHER PAK JAWS FOR 547-35051 4860 EA appearance you want throughout your vehicle C | WEATHERPACK $2499 EA 910-1003-SIZE SINGLE SEAL $1999 EA WIRE CRIMPING TOOL 910-1012-SIZE DOUBLE SEAL 4499 EA $1099 EA --Crimps 24-12 gauge open K | 125 PIECE barrel terminals and weatherpack terminals GROMMET KIT --Makes precision “F” crimps - 5 crimp nests 910-0663 --Pass fuel line, cables and wiring neatly though body panels without D | WEATHERPACK the risk of damage EXTRACTOR TOOLS - 1⁄8” I.D. to 1” I.D. --Easily releases and extracts 940-04015 $999 PK GM, Ford and Chrysler OEM terminals from their L | 8” GROUND STRAP $999 EA WeatherPak housings --Also releases lock tab on --11 Gauge Packard 56 and Pak Con terminals --375 inch stud Includes --Stranded and tin plated --Extractor tool 910-8068 --Narrow Extractor Pick- .05” --Wide Extractor Pick- .09” 910-8193 M | QUICK CONNECT E | WEATHERPACK TERMINALS KIT - 216 PIECE --Contains one male and one --120 electrical terminals female component --70 seals --22 housings 910-12200 2 $499 SET --4 tools 910-12201 3 549 SET 910-12202 4 599 SET 910-12203 6 699 SET 910-12216 $11999 EA 910-12204 9 749 SET 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 311

ELECTRICAL || Starters A | COMPACT $11999 KIT F | STARTER BY $16999 EA STARTER COMBO STEPHENVILLE ELECTRIC 1999 EA --Complete kit includes 1.4kw compact starter with a 2999 EA quick-disconnect wiring harness and heat shield --Compact 3HP --For 153-and 168-tooth S/B Chevy flywheels --New proprietary design to crank 910-67400 high compression and big cubicinch Chevy engines --Each starter is dyno tested 910-66300 STARTER 910-66310 REPLACEMENT SOLENOID 910-66311 REPLACEMENT DRIVE B | COMPACT STARTER G | SUPER-MINI $16999 EA STARTER 22999 EA --Fits 153 and 168 tooth flywheel --High torque high output --2.6 hp $18499 EA gear reduction --Works with big cubic inch 24499 EA --6061-T6 machined mounting plate high compression engines --Chevy V8 or 90° V6 $30295 EA --Will work on blocks with angle S/B-B/B CHEVY - 153 OR 168 TOOTH FLYWHEEL 31995 EA --bolt starter flange by drilling and tapping one hole 910-6772-PLN BLACK FINISH 31395 EA 910-6772-CHR CHROME FINISH 29495 EA 910-67440 NEW 1.4 KW MOTOR SBC $10499 EA S/B FORD 289-351W WITH AUTO TRANSMISSION 910-66258 NEW HIGH-TORQUE 2.0 KW MOTOR SBC 16999 EA 910-6785-PLN BLACK FINISH $12699 EA 910-6785-CHR CHROME FINISH 910-67430 NEW S/B FORD 1.4 KW AUTO TRANNY 19999 EA $1499 EA 910-67433 NEW S/B FORD 1.4 KW MANUAL TRANNY 19999 EA H | STARTERS 910-67435 PINION GEAR 1999 EA --3 hp 910-67436 CLUTCH ASSEMBLY 5999 EA --Gear reduction 4.4:1 improve 910-67437 SOLENOID 2999 EA torque for cranking 910-67434 SHIM AND BOLT KIT --Mount can be clocked 799 KIT C | LIGHTWEIGHT SPEEDWAY 547-5095 SBC CHEVY V8 153 AND 168 TOOTH-STRAIGHT PATTERN STARTERS 547-5096 CHEVY LS BASED ENGINES --Can be rotated 360° HITACHI --3” roller diameter $18499 EA 547-5090 FORD 289/302/351W --For 153 or 168 tooth flywheel 547-5098 MOPAR 273-440 and straight bolt patterns 21999 EA --Works with motors up to 10:1 compression --1.0 kw motor 71⁄2” lb. S/B Chevy --Includes bolts and shims J | CHEVY MINI STARTER 910-67409 SPEEDWAY --153/168 tooth flywhee 910-67410 HITACHI --Adjustable mounting block --Works with most D | ALUMINUM HEAT SHIELD oversized kickout oil pans FOR CHEVY MINI STARTER --4.4:1 gear reductions ratio --Recommended for 10:1 compression ratio --Prevent heat from exhaust from --Weighs 7.25 pounds cooking your starter and solenoid --Dyno test results included --Easy to install 255-9100 --Chevy or Ford --Fits 910-67440 starter only $1499 EA K | QUICK 1999 EA DISCONNECT MINI 910-17481-RAW PLAIN STARTER HARNESS 910-17481-POL POLISHED $2499 EA --Snaps on the solenoid and features E | UNIVERSAL a weather pack connector to STARTER HEAT SHIELD ensure a corrosion free connection --Does not fit Powermaster XS style starter --Withstands 500ºF of direct heat / 2000º radiant 545-74245 356-10402 7\" WIDE X 24\" LONG HEAT SHIELD 312 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Starters E | 100 FT. ROLL OF 14 GAUGE PRIMARY WIRE --High temperature, multi-strand automotive wire A | CHEVY GEAR --Choose Black, Blue, Orange, Purple, Red, REDUCTION STARTER Yellow, Green or White --8.5 lb. high-torque gear 910-12100-COLOR $2299 ROLL reduction starter F | WIRE STRIPPER --Clears headers and oil pans where AND CRIMPER original equipment starters won’t --No heat soak problems --Cut, strip and crimp 22-10 --4.4:1 reduction ratio and 200 ft. lb. of torque gauge wire and terminals and --S/B and B/B Chevy 7-8.5mmplug wires and terminals 910-67450 153-TOOTH FLEXPLATE - STRAIGHT BOLT PATTERN $20999 EA 1 910-86500 STRIPPER/CRIMPER $699 EA 910-67455 168-TOOTH FLEXPLATE - STRAIGHT BOLT PATTERN 21499 EA 2 910-64113 MIZE STRIPPER 3799 EA 910-67460 168-TOOTH FLEXPLATE - STAGGERED BOLT PATTERN 22499 EA 910-67483 FOR BRINN BELL HOUSING 22499 EA G | HI-TEMP HEAT SHRINK B | ONE WIRE RACING TUBING WIRE INSULATION ALTERNATOR --Use to insulate wires, connections, --Billet aluminum deep groove terminals, wire splicing & more reduction pulley --80 amp, 14 volt 356-10836 9MM, 12MM, 18MM AND 24MM KIT - 2 FT. $2099 EA 3MM, 6MM, AND 9MM KIT - 4 FT. 1999 EA 910-68100 ALTERNATOR WITH PULLEY $8999 EA 356-10839 9MM ROLL - 4 FT. 1099 EA 356-10832 12MM ROLL - 4 FT. 1199 EA 545-64800 REPLACEMENT BILLET PULLEY FOR ONE-WIRE ALTERNATOR, OR 2999 EA 356-10833 18MM ROLL - 4 FT. 1499 EA UPGRADE STOCK ALTERNATOR TO THIS 5” LARGE DIAMETER PULLEY 356-10834 24MM ROLL - 4 FT. 1599 EA 356-10835 3MM ROLL - 4 FT. 899 EA 356-10837 6MM ROLL - 4 FT. 999 EA 356-10838 $12999 EA SHOWN C | MINI ALTERNATOR H | S/B FORD INSTALLED ALTERNATOR BRACKET --14.7 Volts --One-wire unit for S/B Chevy using short pump only --Mounts Ford or Nippondenso alternator --Mounts on either side of engine, water pump mounted and driven on either side of engine --Includes alternator, alternator pulley, pulley crank kit belt, and --Fits with mechanical and electric water alternator mounting bracket pumps from most major manufacturers --Bracket and mounting hardware included 545-63810 S/B FORD ALTERNATOR BRACKET J | SNUG MOUNT 100 910-68120 50 AMP WITH SERPENTINE STYLE BELT $38999 EA AMP ALTERNATOR KIT 910-68121 50 AMP WITH V-BELT 38999 EA 910-68122 100 AMP WITH SERPENTINE STYLE BELT SHOWN 38999 EA --Mounts alternator on lower driver’s side 910-68125 100 AMP WITH V-BELT 38999 EA --Fits S/B Chevy short water pump 910-68128 MINI RACING ALTERNATOR ONLY 25999 EA --Includes alternator, brackets, bolts, spacers, pulley and belt --Voltage set point 14.9V 910-68123 REPLACEMENT SERPENTINE BELT 1399 EA --From crankshaft centerline to outer edge of alternator is 12.3” 910-68127 REPLACEMENT V-BELT 2499 EA 910-181 ALUMINUM V-BELT ALTERNATOR PULLEY 2999 EA 910-68124 $36999 EA D | ALTERNATOR KIT K | REVERSE --Kit includes alternator, mounting MOUNT STARTERS bracket, bolts, spacers and drive pulley --Does not include belt but we --For Bert, Brinn and recommend a 221⁄2\" V belt Quartermaster bellhousing --Weight 8 lbs --Single wire hook up 220-79060 BRINN $28499 EA --40 amps POWERMASTER --Voltage output at race speed up to 15.2 volts 910-67483 QUARTERMASTER 22499 EA --Short water pump application (will fit V belt or serpentine pulleys) 910-114170 37372 EA 910-66301 $29899 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 313

FITTINGS || Plumbing STRAIGHT HOSE END 1 617-68106 617-68108 -6 AN $1399 EA C | VAPOR GUARD HOSE A | REAL-STREET 617-68110 -8 AN 1599 EA PTFE HOSE 30° HOSE END -10 AN 1799 EA --For carbureted or EFI applications END FITTINGS 2 617-68006 --5/16\" or 3/8\" 617-68008 -6 AN $2299 EA --Available in 3, 6, 10, 15, 20 foot lengths --Black anodized finish 617-68010 -8 AN 2899 EA --Double-swivel design 45° HOSE END -10 AN 3699 EA CARBURATED 5/16\" $1197 UP --Reusable 3 617-68406 425-760055ERL-LENGTH 3/8\" 1197 UP --For P.T.F.E. hose only -6 AN $2199 EA -8 AN 2699 EA 425-760066ERL-LENGTH 5/16\" $1499 UP 617-68408 -10 AN 2999 EA EFI 3/8\" 1499 UP 425-750055ERL-LENGTH 617-68410 -6 AN 425-750055ERL-LENGTH $2944 EA -8 AN 683 5/PACK 60° HOSE END -10 AN 735 5/PACK 4 617-68606 599 5/PACK 617-68608 -6 AN $2299 EA 538 5/PACK -8 AN 585 5/PACK 617-68610 -10 AN 2899 EA 637 5/PACK 3699 EA -6 AN 90° HOSE END -8 AN 5 617-68906 -10 AN 617-68908 $2199 EA -6 AN 617-69910 -8 AN 2699 EA -10 AN 2899 EA 120° HOSE END -6 AN 6 617-68206 -8 AN 617-68208 -10 AN $2899 EA 3199 EA D | VAPOR GUARD 617-68210 3499 EA TOOLS AND CLAMPS 150° HOSE END $2899 EA VAPOR GUARD CLAMP PLIERS AND CLAMPS 7 617-68506 3399 EA 425-750000ERL CRIMP STYLE HOSE CLAMP PLIERS 617-68508 3499 EA 425-750005ERL SCREW TYPE 5⁄16\" HOSE CLAMP 425-750006ERL SCREW TYPE 3⁄8\" HOSE CLAMP 617-68510 $2899 EA 425-750009ERL 1 EAR TYPE 5⁄16\" HOSE CLAMP 3799 EA 425-750010ERL 1 EAR TYPE 3⁄8\" HOSE CLAMP 180° HOSE END 3499 EA 425-750011ERL 2 EAR TYPE 5⁄16\" HOSE CLAMP 8 617-68806 425-750012ERL 2 EAR TYPE 3⁄8\" HOSE CLAMP 617-68808 617-68810 B | 6000 PTFE LINED HOSES BLACK E | VAPOR GUARD $486 EA HOSE ENDS 486 EA --Clear cover or black cover 879 EA --Works well for hot oil and --Aluminum construction --Black anodized finish 1049 EA power steering fluid --Reusable 879 EA ---6 AN Working pressure: 1,500 psi STAINLESS 879 EA VAPOR GUARD -6 AN HOSE ENDS Burst pressure: 6,000 psi 425-750156ERL STRAIGHT HOSE END -6 TO 5⁄16\" $538 EA ---8 AN Working pressure: 2,000 psi 425-750166ERL STRAIGHT HOSE END -6 TO 3⁄8\" 538 EA 486 EA Burst pressure: 8,000 psi 425-754156ERL 45° HOSE END -6 TO 5⁄16\" 585 EA ---10 AN Working pressure: 1,500 psi 425-754166ERL 45° HOSE END -6 TO 3⁄8\" 486 EA 585 EA Burst pressure: 6,000 psi 425-759156ERL 90° HOSE END -6 TO 5⁄16\" 735 EA 425-759166ERL 90° HOSE END -6 TO 3⁄8\" 735 EA -6 AN LINED HOSE Working pressure: 1500 psi - Burst pressure: 6000 PSI VAPOR GUARD NPT HOSE ENDS 683 EA 617-63006 425-781605ERL STRAIGHT 1⁄4\" NPT TO 5⁄16\" 780 EA -6 AN, 3 FT. ROLL, STAINLESS $1599 EA 425-781606ERL STRAIGHT 1⁄4\" NPT TO 3⁄8\" 683 EA 425-781652ERL STRAIGHT 1⁄8\" NPT TO 5⁄16\" 780 EA 617-66006 -6 AN, 6 FT. ROLL, STAINLESS 3499 EA 425-781656ERL STRAIGHT 3⁄8\" NPT TO 5⁄16\" 617-61506 -6 AN, 15 FT. ROLL, STAINLESS 7499 EA 425-781662ERL STRAIGHT 1⁄8\" NPT TO 3⁄8\" $780 EA 425-781666ERL STRAIGHT 3⁄8\" NPT TO 3⁄8\" 780 EA 617-62006 -6 AN, 20 FT. ROLL, STAINLESS 9799 EA 617-66026 -6 AN, 6 FT. ROLL, BLACK 4999 EA 425-782205ERL 90° 1⁄4\" NPT TO 5⁄16\" $683 EA 425-782206ERL 90° 1⁄4\" NPT TO 3⁄8\" 683 EA 617-61026 -6 AN, 10 FT. ROLL, BLACK 7499 EA 425-782252ERL 90° 1⁄8\" NPT TO 5⁄16\" 425-782256ERL 90° 3⁄8\" NPT TO 5⁄16\" -8 AN LINED HOSE Working pressure: 2000 psi - Burst pressure: 8000 PSI 425-782262ERL 90° 1⁄8\" NPT TO 3⁄8\" 617-66008 425-782266ERL 90° 3⁄8\" NPT TO 3⁄8\" -8 AN, 6 FT. ROLL, STAINLESS $4499 EA VAPOR GUARD 3 WAY TEE 425-782405ERL 5⁄16\" 3 WAY TEE 617-61508 -8 AN, 15 FT. ROLL, STAINLESS 9499 EA 425-782406ERL 3⁄8\" 3 WAY TEE VAPOR GUARD O-RING PORT 617-62008 -8 AN, 20 FT. ROLL, STAINLESS 12999 EA 425-785056ERL 9⁄16\" -18 O-RING PORT TO 5⁄16\" 617-63028 -8 AN, 3 FT. ROLL, BLACK 3499 EA 425-785066ERL 9⁄16\" -18 O-RING PORT TO 3⁄8\" 617-62028 -8 AN, 20 FT. ROLL, BLACK 22999 EA -10 AN LINED HOSE Working pressure: 1500 psi - Burst pressure: 6000 PSI 617-63010 -10 AN, 3 FT. ROLL, STAINLESS $2099 EA 617-61510 -10 AN, 15 FT. ROLL, STAINLESS 10999 EA 617-62010 -10 AN, 20 FT. ROLL, STAINLESS 13999 EA 617-63029 -10 AN, 3 FT. ROLL, BLACK 3499 EA 617-66029 -10 AN, 6 FT. ROLL, BLACK 7499 EA 617-61029 -10 AN,10 FT. ROLL, BLACK 12999 EA 617-61529 -10 AN, 15 FT. ROLL, BLACK 18999 EA 617-62029 -10 AN, 20 FT. ROLL, BLACK 25999 EA More options available at SpeedwayMotors.com 314 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing A | SPEED-FLEX LINE --Extruded PTFE --Standard of racing industry --For flexible brake & clutch hoses --Firmer brake feel --For instrument hoses C | BULK SUPERSTOCK HOSE --Available in sizes 10\" to 48\" --Pressure tested to 4000 PSI --Quality synthetic rubber hose SPEEDWAYMOTORS.COM --Maximum pressure rating of 250 PSI --Interior braided fabric sheath FOR FULL LINE OF EARL'S PRODUCTS --For OE applications --For professional racers -3 AN FEMALE TO 10MM/3/8 BANJO SPEED-FLEX LINE --Continuous service 425-63010213ERL --Suitable for fuel/oil/water 13\" $1979 EA --Sold in 3, 6, 10, 15, and 20 foot lengths 2726 EA 425-63010248ERL 48\" $2492 EA BLACK BLUE -3 AN FEMALE STRAIGHT AND 90° SPEED-FLEX LINE 3143 EA AN 4 AN 4 425-63011710ERL 425-780004ERL-3 3 FEET 425-790004ERL-3 3 FEET 10\" 425-780004ERL-6 6 FEET $1497 EA 425-790004ERL-6 6 FEET $1099 EA 425-63011728ERL 28\" 425-780004ERL-10 10 FEET 2994 EA 425-790004ERL-10 10 FEET 2199 EA 425-780004ERL-15 15 FEET 4990 EA 425-790004ERL-15 15 FEET 3599 EA MANY MORE SIZES AVAILABLE AT SPEEDWAYMOTORS.COM 7485 EA 5399 EA 425-780004ERL-20 20 FEET 9980 EA 425-790004ERL-20 20 FEET 7199 EA B | BLACK SUPER AN 6 AN 6 STOCK HOSE ENDS 425-780006ERL-3 3 FEET $1197 EA 425-790006ERL-3 3 FEET $1199 EA 2394 EA 2399 EA --A direct replacement for the 425-780006ERL-6 6 FEET 3990 EA 425-790006ERL-6 6 FEET 3999 EA brass push lock type 425-780006ERL-10 10 FEET 5985 EA 425-790006ERL-10 10 FEET 5999 EA --Machined from aluminum alloy 425-780006ERL-15 15 FEET 7980 EA 425-790006ERL-15 15 FEET 7999 EA STRAIGHT $625 EA 120º 425-780006ERL-20 20 FEET $1497 EA 425-790006ERL-20 20 FEET $1497 EA 425-AT700145ERL AN 4 425-AT712045ERL AN 4 $2174 EA AN 8 2994 EA AN 8 2994 EA 625 EA 425-780008ERL-3 3 FEET 4990 EA 425-790008ERL-3 3 FEET 4999 EA 425-AT700167ERL AN 6 664 EA 425-AT712067ERL AN 6 2223 EA 7485 EA 7485 EA 425-AT700109ERL AN 8 885 EA 425-AT712009ERL AN 8 2445 EA 425-780008ERL-6 6 FEET 9980 EA 425-790008ERL-6 6 FEET 9980 EA 425-AT700111ERL AN 10 1332 EA 425-AT712011ERL AN 10 2557 EA 425-780008ERL-10 10 FEET 425-790008ERL-10 10 FEET 425-AT700113ERL AN 12 425-AT712013ERL AN 12 2778 EA 425-780008ERL-15 15 FEET $1797 EA 425-790008ERL-15 15 FEET $1797 EA 3594 EA 3594 EA 45º 180º 425-780008ERL-20 20 FEET 5990 EA 425-790008ERL-20 20 FEET 5999 EA 425-AT704645ERL AN 4 $2033 EA 425-AT718045ERL AN 4 $2212 EA AN 10 8985 EA AN 10 8985 EA 425-780010ERL-3 3 FEET 425-790010ERL-3 3 FEET 425-AT704667ERL AN 6 2000 EA 425-AT718067ERL AN 6 2334 EA 11980 EA 11980 EA 425-AT704609ERL AN 8 2334 EA 425-AT718009ERL AN 8 2445 EA 425-780010ERL-6 6 FEET 425-790010ERL-6 6 FEET 425-AT704611ERL AN 10 2667 EA 425-AT718011ERL AN 10 2557 EA 425-780010ERL-10 10 FEET $2097 EA 425-790010ERL-10 10 FEET $2097 EA 425-AT704613ERL AN 12 3114 EA 425-AT718013ERL AN 12 2778 EA 425-780010ERL-15 15 FEET 4194 EA 425-790010ERL-15 15 FEET 4194 EA 6999 EA 6990 EA 90º MALE PIPE TO HOSE 425-780010ERL-20 20 FEET 425-790010ERL-20 20 FEET 425-AT709145ERL AN 4 $2000 EA 425-AT720142ERL 1⁄8” - AN 4 $859 EA AN 12 10485 EA AN 12 10485 EA 425-780012ERL-3 3 FEET 13980 EA 425-790012ERL-3 3 FEET 13980 EA 425-AT709167ERL AN 6 2000 EA 425-AT720164ERL 1⁄4” - AN 6 1127 EA 425-AT709109ERL AN 8 2334 EA 425-AT720186ERL 3⁄8” - AN 8 1218 EA 425-780012ERL-6 6 FEET 425-790012ERL-6 6 FEET 425-AT709111ERL AN 10 2667 EA 425-AT720111ERL 1⁄2” - AN 10 1509 EA 425-780012ERL-10 10 FEET 425-790012ERL-10 10 FEET 425-AT709113ERL AN 12 2778 EA 425-AT720113ERL 3⁄4” - AN 12 1617 EA 425-780012ERL-15 15 FEET 425-790012ERL-15 15 FEET 425-780012ERL-20 20 FEET 425-790012ERL-20 20 FEET FITTING THREAD SIZE CHART AN HOLE SIZE SAE 37 DEGREE WRENCH SAE 45 DEGREE WRENCH SAE PIPE TUBE O.D. AN 3 THREAD 1⁄2” THREAD 1⁄2” INVERTED FLARE THREAD SIZE SIZE AN 4 3⁄8” - 24 9⁄16” 3⁄8” - 24 9⁄16” 3⁄8” - 24 1⁄8” - 27 3⁄16” AN 6 7⁄16” - 20 11⁄16” 7⁄16” - 20 3⁄4” 7⁄16” - 24 1⁄4” - 18 1⁄4” AN 8 9⁄16” - 18 7⁄8” 5⁄8” - 18 7⁄8” 5⁄8” - 20 3⁄8” - 18 3⁄8” AN 10 3⁄4” - 16 1” 3⁄4” - 16 1” 3⁄4” - 18 1⁄2” - 14 1⁄2” AN 12 7⁄8” - 14 11⁄4” 7⁄8” - 14 11⁄4” 7⁄8” - 18 ---- 5⁄8” AN 16 11⁄16” - 12 13⁄8” 11⁄16” - 14 ---- 11⁄16” - 16 3⁄4” - 14 3⁄4” 15⁄16” - 12 ---- ---- ---- 1” E | AN FITTING CAPS AND PLUGS AN FITTING CAPS 4 PACK AN FITTING PLUGS 4 PACK 545-23799 AN 3 $499 SET 545-23798 AN 3 --Used when sealing 499 SET 545-23800 AN 4 $699 SET 499 SET 545-23802 AN 6 race engines 545-23801 AN 4 499 SET 545-23804 AN 8 499 SET C | PLASTIC AN CAP 499 SET 545-23806 AN 10 499 SET AND PLUG KIT --Each cap and plug is reusable 545-23803 AN 6 599 SET 545-23808 AN 12 499 SET --Use on oil, fuel, or coolant lines 545-23805 AN 8 599 SET 545-23810 AN 16 499 SET --Includes six each cap and plug --Four caps or plugs per package 545-23807 AN 10 599 SET for AN 3, AN 4, AN 6, AN 8, --Economy pack includes four 545-23809 AN 12 1599 KIT 910-09401 ECON PACK 599 SET AN 10 and AN 12 each of AN 4, AN 6, AN 8, 545-23811 AN 16 --AN 10, and AN 12 910-09400 ECON PACK 1599 KIT 910-09450 $1499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 315

FITTINGS || Plumbing A | FULL FLOW SWIVEL HOSE FITTINGS STRAIGHT BLUE/REDPRICE BLACK PRICE 45° BLUE/RED PRICE BLACK PRICE 90° BLUE/RED PRICE BLACK PRICE AN 6 620-1002 $499 EA 620-10021 $599 EA AN 6 620-1009 $1199 EA 620-10091 $1299 EA AN 6 620-1016 $1199 EA 620-10161 $1299 EA AN 8 AN 8 AN 8 620-1003 599 EA 620-10031 699 EA AN 10 620-1010 1399 EA 620-10101 1499 EA AN 10 620-1017 1399 EA 620-10171 1499 EA AN 12 620-1011 1599 EA 620-10111 1699 EA AN 12 620-1018 1599 EA 620-10181 1699 EA AN 10 620-1004 799 EA 620-10041 899 EA AN 20 620-1012 1899 EA 620-10121 2099 EA AN 20 620-1019 1899 EA 620-10191 2099 EA 617-1014 6999 EA 617-1021 7499 EA AN 12 620-1005 999 EA 620-10051 1199 EA AN 20 617-1007 3499 EA D | NICKEL PLATED FULL FLOW SWIVEL HOSE FITTINGS B | TFE STAINLESS WIRE BRAIDED HIGH PRESSURE HOSE --Easy assembly and better seal than push-on style fittings --High quality aluminum --Used for many high pressure applications, such as brakes with a brilliant nickel finish and power steering --Available in straight, 45 or 90 degree --Provides maximum performance by combining the low friction --Corrosion resistant and reusable properties of the Teflon® inner liner with the antiburst strength --Must use with Speedway hose listed below from a stainless steel overbraiding --Stainless overbraid won’t corrode or discolor --Must be used with steel fittings found below STRAIGHT 620-10020 AN 6 $799 EA 1399 EA PART # AN SIZE HOSE I.D. LENGTH PRICE 620-10030 AN 8 1599 EA 617-3069-LENGTH AN 3 1⁄8” 620-10040 AN 10 2299 EA 3', 6', 10', 15', 20' $1799 UP 620-10050 AN 12 UP $2299 EA 617-3070-LENGTH AN 4 3⁄16” 3', 6', 10', 15', 20' 1799 2399 EA 617-3259-LENGTH 2699 EA AN 6 11⁄32” 3', 6', 10', 15', 20' 2399 UP 45º AN 6 3099 EA 617-3249 1299 EA 620-10090 AN 8 617-3250 AN 3 1⁄8” 3 FT. 2499 EA 620-10100 AN 10 $2099 EA 617-3251 AN 3 1⁄8” 6 FT. 3999 EA 620-10110 AN 12 2599 EA 617-3252 AN 3 1⁄8” 10 FT. 6999 EA 620-10120 3099 EA 617-3253 AN 3 1⁄8” 15 FT. 7499 EA AN 6 3099 EA AN 3 1⁄8” 20 FT. 1599 EA 90º AN 8 617-3254 2499 EA 620-10160 AN 10 617-3255 AN 4 3⁄16” 3 FT. 4999 EA 620-10170 AN 12 617-3256 AN 4 3⁄16” 6 FT. 5999 EA 620-10180 617-3257 AN 4 3⁄16” 10 FT. 8999 EA 620-10190 617-3258 AN 4 3⁄16” 15 FT. AN 4 3⁄16” 20 FT. 617-3260 AN 6 11⁄32” 3 FT. 2499 EA 617-3261 AN 6 11⁄32” 6 FT. 3999 EA 617-3262 AN 6 11⁄32” 10 FT. 5999 EA C | HOSE ENDS E | STAINLESS FOR TFE HOSE STEEL BRAIDED LINE --High alloy steel for rugged brake systems --Use in conjunction with full flow fittings shown above --Can handle up to 3000 psi --Not recommended for high temperature applications --Must be used with TFE high pressure hose directly above AN 6 3 FEET $1199 EA AN 8 3 FEET $1499 EA 617-2013 AN 3 - STRAIGHT $799 EA 620-306-3 6 FEET 620-308-3 6 FEET 2999 EA 617-2014 AN 4 - STRAIGHT 699 EA 10 FEET 2399 EA 10 FEET 4999 EA 617-2040 AN 6 - STRAIGHT 799 EA 620-306-6 15 FEET 3999 EA 620-308-6 15 FEET 7499 EA 620-306-10 20 FEET 5999 EA 620-308-10 20 FEET 9799 EA 617-2015 AN 3 - 45° 1299 EA 620-306-15 7999 EA 620-308-15 617-2016 AN 4 - 45° 1099 EA 620-306-20 620-308-20 $1999 EA 617-2041 AN 6 - 45° 1599 EA 3999 EA AN 10 3 FEET $1699 EA AN 12 3 FEET 6499 EA 617-2017 AN 3 - 90° 1299 EA 620-310-3 6 FEET 620-312-3 6 FEET 9499 EA 617-2018 AN 4 - 90° 1199 EA 10 FEET 3499 EA 10 FEET 617-2042 AN 6 - 90° 1999 EA 620-310-6 15 FEET 5999 EA 620-312-6 15 FEET 11999 EA 620-310-10 20 FEET 8499 EA 620-312-10 20 FEET 620-310-15 11499 EA 620-312-15 620-310-20 620-312-20 316 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing A | FULL FLOW HOSE ENDS --Use with Aeroquip hose listed below STRAIGHT BLUE/REDPRICE BLACK PRICE 45° BLUE/RED PRICE BLACK PRICE 90° BLUE/RED PRICE BLACK PRICE AN 4 617-1001 $999 EA N/A N/A AN 4 617-1008 $1599 EA N/A N/A AN 4 N/A N/A N/A N/A AN 6 AN 6 AN 6 617-1002 799 EA 617-10021 899 EA AN 8 617-1009 2299 EA 617-10091 2299 EA AN 8 617-1016 1799 EA 617-10161 1799 EA AN 10 617-1010 2599 EA 617-10101 2599 EA AN 10 AN 8 617-1003 999 EA 617-10031 899 EA AN 12 617-1011 3099 EA 617-10111 3099 EA AN 12 617-1017 2099 EA 617-10171 2099 EA AN 16 617-1012 3599 EA 617-10121 3499 EA AN 16 AN 10 617-1004 1099 EA 617-10041 1099 EA 617-1013 4599 EA 617-10131 4599 EA 617-1018 2599 EA 617-10181 2399 EA AN 12 617-1005 1499 EA 617-10051 1499 EA 617-1019 2999 EA 617-10191 2999 EA AN 16 617-1006 2499 EA 617-10061 2499 EA 617-1020 4599 EA N/A N/A EA 620-504-LENGTH AN 4 $599 PER/FT 620-506-LENGTH AN 6 799 PER/FT 899 PER/FT 620-508-LENGTH AN 8 999 PER/FT 1099 PER/FT B | PREMIUM 620-510-LENGTH AN 10 1299 PER/FT BLACK 120° BLUE/RED PRICE BLACK PRICE 620-512-LENGTH AN 12 AN 6 617-1022 $3099 EA 617-10221 $2999 EA 620-516-LENGTH AN 16 AN 8 AN 10 617-1023 3399 EA 617-10231 3099 EA SYNTHETIC HOSE AN 12 617-1024 3899 EA 617-10241 3099 EA --Rubber core, flexible braided nylon cover AN 16 617-1025 3899 EA 617-10251 3299 EA --Resistant to oil, fuels, and coolants 617-1030 4999 EA 617-10301 4999 EA --Features a 500 psi working pressure and an operating range of -40°F to +300°F --Designed to be used with both crimp style and full flow fittingsc 180° BLUE/RED PRICE BLACK PRICE C | STAINLESS STEEL AN 6 617-1026 $2999 EA 617-10261 $2999 EA BRAIDED WIRE HOSE AN 8 617-1027 3599 EA 617-10271 3299 EA --One of the finest fluid transfer AN 10 617-1028 3599 EA 617-10281 3399 EA hoses available today AN 12 617-1029 3899 EA 617-10291 3899 EA Hoses provide maximum flexibility AN 16 617-1031 5399 EA 617-10311 5499 EA and complete reliability --750 psi operating pressure ---45° to 300° F temperature rating --Use this with full flow hose ends listed on this page --No returns on cut to length hoses --Must use with Aeroquip full flow ends on this page --Available in lengths of 3, 6, 10, 15, 20 E | POWER STEERING PART # AN SIZE HOSE I.D. PRICE HOSE ENDS AND 617-304 AN 4 7⁄32” $999 PER/FT STEERING ADAPTERS AN 6 11⁄32” 617-306 AN 8 7⁄16” 899 PER/FT HOSE ENDS 617-308 AN 10 9⁄16” 999 PER/FT 617-310 AN 12 11⁄16” 1099 PER/FT 617-312 AN 16 7⁄8” 1099 PER/FT 617-316 AN 20 11⁄8” 1699 PER/FT 617-320 AN 24 13⁄4” 2099 PER/FT 617-324 AN 32 113⁄16” 2399 PER/FT 617-332 2599 PER/FT 425-130106ERL -6 AN STRAIGHT $896 EA 425-134606ERL -6 AN 45° 1904 EA 425-139106ERL -6 AN 90° 1860 EA STEERING ADAPTERS 425-961946ERL -6 AN MALE TO 1⁄2\"-20\" MALE $1041 EA D | POWER STEERING HOSE 425-961947ERL -6 AN MALE TO 5⁄8\"-18\" MALE 1041 EA --Meets tough power steering requirements 425-961950ERL -6 AN MALE TO 11⁄16\"-18\" IFM 1041 EA --Triple steel and fabric reinforced --Also suitable for hydraulics and air lines 425-961955ERL -6 AN MALE T0 16MMX1.5 MALE 1041 EA --2,250 PSI operating pressure --Sold in 3, 6, 10, 15 and 20 foot lengths 425-961956ERL -6 AN MALE T0 18MMX1.5 MALE 1041 EA 425-961961ERL -6 AN MALE T0 POWER STEERING 2602 EA PUMP PRESSURE LINE 425-991950ERL -6 AN MALE TO 11⁄16\"-18\" IFM 643 EA BLUE 3 FEET $2097 EA BLACK 3 FEET $2097 EA 425-991946ERL -6 AN MALE TO 1⁄2\"-20\" 667 EA 425-130006ERL-3 6 FEET 425-150006ERL-3 6 FEET 425-991947ERL -6 AN MALE TO 5⁄8\"-18\" 667 EA 10 FEET 4194 EA 10 FEET 4194 EA 425-991954ERL -6 AN MALE T0 14MMX1.5 815 EA 425-130006ERL-6 15 FEET 6999 EA 425-150006ERL-6 15 FEET 6999 EA 425-991955ERL -6 AN MALE T0 16MMX1.5 815 EA 425-130006ERL-10 20 FEET 10485 EA 425-150006ERL-10 20 FEET 10485 EA 425-991956ERL -6 AN MALE T0 18MMX1.5 815 EA 425-130006ERL-15 13980 EA 425-150006ERL-15 13980 EA 425-130006ERL-20 425-150006ERL-20 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 317

FITTINGS || Plumbing A | SOCKETLESS PUSH-ON HOSE ENDS FOR 37° FITTINGS STRAIGHT BLUE/REDPRICE BLACK PRICE 45° BLUE/RED PRICE BLACK PRICE 90° BLUE/RED PRICE BLACK PRICE AN 6 620-2002 $499 EA 620-20021 $499 EA AN 6 620-2009 $1099 EA 620-20091 $1299 EA AN 6 620-2016 $1099 EA 620-20161 $1199 EA AN 8 AN 8 620-2003 599 EA 620-20031 599 EA AN 8 620-2010 1499 EA 620-20101 1499 EA AN 10 620-2017 1499 EA 620-20171 1499 EA AN 10 620-2011 1699 EA 620-20111 1799 EA AN 12 620-2018 1699 EA 620-20181 1799 EA AN 10 620-2004 699 EA 620-20041 699 EA AN 12 620-2012 1799 EA 620-20121 1999 EA 620-2019 1799 EA 620-20191 1999 EA AN 12 620-2005 899 EA 620-20051 999 EA B | BLACK PUSH-ON HOSE D | BLUE PUSH-ON HOSE --250 psi / 200 degree --250 psi / 200 degree AN 6 $999 EA AN 8 $1099 EA AN 6 $999 EA AN 8 $999 EA 620-106-3 3 FEET 620-108-3 3 FEET 2099 EA 620-206-3 3 FEET 620-208-3 3 FEET 1799 EA 1799 EA 3499 EA 1799 EA 2999 EA 620-106-6 6 FEET 2999 EA 620-108-6 6 FEE 4999 EA 620-206-6 6 FEET 2999 EA 620-208-6 6 FEET 4499 EA 620-106-10 10 FEET 4499 EA 620-108-10 10 FEET 6499 EA 620-206-10 10 FEET 4499 EA 620-208-10 10 FEET 5999 EA 620-106-15 15 FEET 5999 EA 620-108-15 15 FEET 620-206-15 15 FEET 5999 EA 620-208-15 15 FEET 620-106-20 20 FEET 620-108-20 20 FEET $1799 EA 620-206-20 20 FEET 620-208-20 20 FEET $1799 EA 3499 EA 3499 EA AN 10 $1299 EA AN 12 5499 EA AN 10 $1299 EA AN 12 5499 EA 620-110-3 3 FEET 620-112-3 3 FEET 7999 EA 620-210-3 3 FEET 620-212-3 3 FEET 7999 EA 2399 EA 2399 EA 620-110-6 6 FEET 3999 EA 620-112-6 6 FEET 10499 EA 620-210-6 6 FEET 3999 EA 620-212-6 6 FEET 10499 EA 620-110-10 10 FEET 5999 EA 620-112-10 10 FEET 620-210-10 10 FEET 5999 EA 620-212-10 10 FEET 620-110-15 15 FEET 7499 EA 620-112-15 15 FEET 620-210-15 15 FEET 7499 EA 620-212-15 15 FEET 620-110-20 20 FEET 620-112-20 20 FEET 620-210-20 20 FEET 620-212-20 20 FEET Note: This hose works ONLY with these fittings! C | FC300 HOSE $2399 UP E | NICKEL AND FITTINGS 799 EA PLATED PUSH-ON --Aeroquip FC 300 spec hose to be 1499 EA HOSE ENDS used as the fuel or power steering line 1499 EA --Choose AN 6, AN 8 or AN 10 and fittings required --High quality aluminum fittings 2999 FT with a brilliant nickel finish 106-FC3000 AN 6 HOSE IN 3, 6, 10, 15, 20 FOOT 999 EA --Available in straight, 45 or 90 degree 106-1302 AN 6 - STRAIGHT END --Corrosion resistant and reusable 106-1386 AN 6 - 45° END 1499 EA 106-1389 AN 6 - 90° END 1399 EA STRAIGHT AN 6 $799 EA 106-FC308 AN 8 HOSE IN 3, 6, 10, 15, 20 FOOT 620-1512 AN 8 1099 EA 106-1305 AN 8 - STRAIGHT END 3299 EA AN 10 1499 EA 106-1384 AN 8 - 45° END 1099 EA 620-1513 AN 12 1699 EA 106-1387 AN 8 - 90° END 2799 EA 620-1514 106-FC301 AN 10 HOSE IN 3, 6, 10, 15, 20 FOOT 2399 EA 620-1515 $2099 EA 106-1306 AN 10 STRAIGHT END 2299 EA 106-1388 AN 10 - 45º END 2799 EA 106-1390 AN 10 - 90º END 2899 EA NPT THREAD SIZE CHART 45º AN 6 $2099 EA 620-1522 AN 8 2299 EA PIPE THREADTHREADS THEORETICAL I.D. THEORETICAL O.D.CLOSEST AN AN 10 2399 EA SIZE PER INCH OF FITTING OF FITTING FITTING SIZE 620-1523 AN 12 2899 EA 620-1524 1⁄8” 27 1⁄8” 3⁄8” 4 620-1525 1⁄4” 18 1⁄4” 1⁄2” 6 90º 620-1532 3⁄8” 18 3⁄8” 5⁄8” 8 AN 6 620-1533 AN 8 1⁄2” 14 1⁄2” 3⁄4” 10 620-1534 AN 10 620-1535 AN 12 3⁄4” 14 3⁄4” 1” 12 1” 111⁄2” 1” 16 318 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing A | SOCKETLESS RE-USABLE FITTINGS C | AN LINE AND A PART # AN A H PRICE FITTING TEMPLATE 106-1231 4 1.5” .19” $499 EA --All in one quick reference tool --Great for completing plumbing jobs H 106-1222 6 1.7” .30” 599 EA --Corrosion resistant stainless steel construction 106-1233 8 2.0” .39” 699 EA 106-1234 10 2.6” .48” 899 EA 910-82635 TEMPLATE $999 EA A B PART # AN A B PRICE 106-1438 4 1.56” .33” $1699 EA 106-1439 Push-on 45° steel 106-1440 6 1.8” .4” 1499 EA hose ends for use 8 2.3” .6” 1699 EA with AN fittings D | PUSH LOCK A PART # AN A B PRICE HOSE TOOL 106-1241 4 1.45” $1199 EA --Traveling carriage contains sealed bearings B Push-on 90° steel 106-1242 6 1.7” .4” 1199 EA and rolls on a track hose ends for use --New drive screw and larger nut for with AN fittings 106-1243 8 2.1” 1.1” 1199 EA improved performance and stability --Thrust and ball bearings on each end of A PART # AN NPT A PRICE the drive screw for smoother operation 106-1207 --Aluminum and stainless steel Push-on hose ends to 6 1⁄4” 1.8” $499 EA construction, making it 40% lighter taper pipe brass 106-1202 --Works with 1/4\"-1\" Hose 106-1206 6 3⁄8” 1.8” 599 EA 469-4092 106-1203 106-1204 8 3⁄8” 1.9” 699 EA 106-1205 8 1⁄2” 2.2” 699 EA $27930 EA 10 1⁄2” 2.7” 899 EA 12 3⁄4” 2.7” 1099 EA 37° A PART # AN A B PRICE 106-2071-4 4 .7” .9” Tight fit 90° male/ B 106-2071-6 6 .9” 1.1” $699 EA female steel E | SPECIAL APPLICATION HOSE 799 EA A --Textile braid -No hose clamp necessary 106-2071-8 8 1.1” 1.5” 899 EA Full flow 90° male/ --Low pressure, socketless -Avaialbe in Black or Blue female steel BLACK BLUE PART # AN A B PRICE AN 4 AN 4 106-500454-10 10 617-004-3 3 FEET $1499 EA 617-504-3 3 FEET $1499 EA B 106-500454-12 12 1.2” 1.8” $2799 EA 2999 EA 2999 EA 1.8” 2.5” 2999 EA 617-004-6 6 FEET 4999 EA 617-504-6 6 FEET 4999 EA 617-004-10 10 FEET 7499 EA 617-504-10 10 FEET 6749 EA B | 37° PUSH-ON HOSE - SOCKETLESS 617-004-15 15 FEET 9999 EA 617-504-15 15 FEET 9999 EA REUSABLE FITTINGS 617-004-20 20 FEET $1799 EA 617-504-20 20 FEET $1799 EA --Fittings are nickel plated to a luster finish for the ultimate AN 6 3599 EA AN 6 3599 EA in professional appearance 617-006-3 3 FEET 5999 EA 617-506-3 3 FEET 5999 EA 8999 EA 8999 EA SOCKETLESS FITTING - STRAIGHT $699 EA 617-006-6 6 FEET 617-506-6 6 FEET 617-1512 AN 6 617-006-10 10 FEET 11999 EA 617-506-10 10 FEET 11999 EA 1299 EA 617-006-15 15 FEET 617-506-15 15 FEET 617-1513 AN 8 1599 EA $2099 EA $2099 EA 617-1514 AN 10 2199 EA 617-006-20 20 FEET 4199 EA 617-506-20 20 FEET 4199 EA 617-1515 AN 12 AN 8 6999 EA AN 8 6999 EA 617-008-3 3 FEET 617-508-3 3 FEET SOCKETLESS FITTING - 45° ELBOW $2399 EA 10499 EA 10499 EA 617-1522 AN 6 617-008-6 6 FEET 13999 EA 617-508-6 6 FEET 13999 EA 2599 EA 617-008-10 10 FEET 617-508-10 10 FEET 617-1523 AN 8 2999 EA 617-008-15 15 FEET $2399 EA 617-508-15 15 FEET $2399 EA 617-1524 AN 10 2999 EA 4799 EA 4799 EA 617-1525 AN 12 617-008-20 20 FEET 7999 EA 617-508-20 20 FEET 7999 EA AN 10 AN 10 SOCKETLESS FITTING - 90° ELBOW $2299 EA 617-010-3 3 FEET 11999 EA 617-510-3 3 FEET 11999 EA 617-1532 AN 6 15999 EA 15999 EA 2399 EA 617-010-6 6 FEET 617-510-6 6 FEET 617-1533 AN 8 2799 EA 617-010-10 10 FEET $2699 EA 617-510-10 10 FEET $2699 EA 617-1534 AN 10 3099 EA 617-010-15 15 FEET 5399 EA 617-510-15 15 FEET 5399 EA 617-1535 AN 12 8999 EA 8999 EA 617-010-20 20 FEET 617-510-20 20 FEET AN 12 13499 EA AN 12 13499 EA 617-012-3 3 FEET 17999 EA 617-512-3 3 FEET 17999 EA 617-012-6 6 FEET 617-512-6 6 FEET 617-012-10 10 FEET 617-512-10 10 FEET 617-012-15 15 FEET 617-512-15 15 FEET 617-012-20 20 FEET 617-512-20 20 FEET 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 319

FITTINGS || Plumbing A | ALUMINUM FLARE BULKHEADS AND TEE ADAPTERS FLARE REDUCERS BLACK BLUE 617-61751 90° BLUE BLACK 617-61761 $699 EA AN 3 617-6123 617-61231 $999 EA AN 3 - AN 4 617-6175 799 EA AN 4 - AN 6 617-6176 617-61771 999 EA AN 4 617-6124 617-61241 799 EA 617-61781 AN 6 617-6125 AN 6 - AN 8 617-6177 617-61801 1099 EA AN 8 617-6126 617-61251 899 EA AN 6 - AN 10 617-6178 1899 EA AN 10 617-6127 AN 6 - AN 12 617-6180 617-61791 1299 EA AN 12 617-6128 617-61261 1299 EA 617-61811 1699 EA AN 8 - AN 10 617-6179 1499 EA AN 16 617-6129 617-61271 1499 EA AN 8 - AN 12 617-6181 617-61821 2399 EA 45° BLUE 617-61831 3099 EA AN 4 324-983704 617-61281 2099 EA AN 10 - AN 12 617-6182 617-61841 AN 12 - AN 16 617-6183 $1099 EA AN 6 324-983706 617-61291 3499 EA AN 12 - AN 16 617-6184 1199 EA AN 8 324-983708 BLACK 1199 EA 324-9837041 $999 EA AN 10 324-983710 $899 EA TEE BLUE 324-9837061 999 EA MALE O-RING TO AN 1099 EA AN 3 617-6130 106-2953 AN 10 - AN 10 1199 EA 324-9837081 1999 EA 1977 EA AN 4 617-6131 106-2954 AN 10 - AN 12 AN 6 617-6132 324-9837101 2099 EA 106-2955 AN 12 - AN 12 $899 EA AN 8 617-6133 BLACK 899 EA AN 10 617-6134 617-61301 $1499 EA 90° FLARE 1299 EA AN 12 617-6135 617-61311 1099 EA 324-982104 AN 4 1499 EA TEE ON RUN BLUE AN 6 1799 EA AN 3 324-980403 617-61321 1499 EA 324-982106 AN 8 2699 EA 324-982108 AN 10 AN 4 324-980404 617-61331 1599 EA 324-982110 $1599 EA AN 8 324-980408 1499 EA 617-61341 1889 EA $399 EA 617-61351 2899 EA FLARE TEE 399 EA BLACK BLUE 399 EA 324-9804031 $1299 EA BLACK 499 EA AN 3 617-4298 617-42981 699 EA 324-9804041 1099 EA 699 EA AN 4 617-6100 617-61000 324-9804081 1799 EA AN 6 617-6102 617-61021 1099 EA AN 8 617-6103 617-61031 STRAIGHT BULKEAD BLACK $599 EA AN 10 617-6104 617-61041 $699 EA BLUE 617-61161 AN 12 617-6105 617-61051 599 EA 699 EA 699 EA AN 3 617-6116 617-61171 699 EA FEMALE SWIVEL RUN TEE 617-61181 699 EA 617-614403 AN 3 1099 EA AN 4 617-6117 617-61191 999 EA 617-614404 AN 4 1199 EA AN 6 617-6118 617-61201 1299 EA 1137 EA AN 8 617-6119 617-61211 2799 EA FLARE PLUGS BLACK AN 10 617-6120 - BLUE 617-60171 $799 EA AN 12 617-6121 799 EA AN 16 617-6122 AN 3 617-6017 617-60181 899 EA 617-60191 999 EA BULKHEAD NUTS BLACK $499 PR AN 4 617-6018 617-60201 BLUE 617-61871 AN 6 617-6019 617-60211 1199 EA 399 PR AN 8 617-6020 617-60221 1499 EA AN 3 617-6187 617-61881 399 PR AN 10 617-6021 617-60231 1499 EA 617-61891 399 EA AN 12 617-6022 1799 EA AN 4 617-6188 617-61901 499 EA AN 16 617-6023 AN 6 617-6189 617-61911 499 EA $1099 EA AN 8 617-6190 617-61921 999 EA STRAIGHT THREAD PLUG 1199 EA AN 10 617-6191 - 1299 EA AN 12 617-6192 BLUE BLACK 1399 EA AN 16 617-6193 AN 4 617-6026 617-60261 1399 EA 1399 EA FLARE UNION AN 6 617-6027 617-60271 BLUE BLACK AN 8 617-6028 617-60281 AN 3 617-6033 617-60331 $499 EA AN 10 617-6029 617-60291 AN 4 617-6034 617-60341 599 EA AN 12 617-6030 617-60301 AN 6 617-6035 617-60351 599 EA 799 EA AN 16 617-6031 N/A AN 8 617-6036 617-60361 799 EA 599 EA SWIVEL COUPLERS AN 10 617-6037-A 617-60371 1399 EA 617-3998 AN 3 1899 EA AN 10 617-6037-S - 617-3999 AN 4 617-4000 AN 6 AN 12 617-6038 617-60381 617-4001 AN 8 617-4002 AN 10 AN 16 617-6039 - 617-4009 AN 6 - 90° 617-4010 AN 8 - 90° FLARE CAPS BLACK $599 EA 617-4011 AN 10 - 90° BLUE 617-61941 699 EA AN FEMALE TO AN MALE REDUCERS AN 3 617-6194 617-61951 699 EA 472-995008 617-61961 799 EA AN 8 - AN 6 AN 4 617-6195 617-61971 799 EA AN 6 617-6196 617-61981 999 EA 472-995110 AN 8 - AN 10 AN 8 617-6197 617-61991 999 EA AN 10 617-6198 617-62001 472-995011 AN 10 - AN 8 AN 12 617-6199 472-995112 AN 16 617-6200 AN 10 - AN 12 AN SIZE METAL TUBE O.D. THREAD SIZE AN SIZE METAL TUBE O.D. THREAD SIZE 472-995012 AN 12 - AN 8 3 3⁄16” 3⁄8”-24 SAE 8 1⁄2” 3⁄4”-16 SAE 4 1⁄4” 7⁄16”-20 SAE 10 5⁄8” 7⁄8”-14 SAE 472-995013 AN 12 - AN 10 5 5⁄16” 1⁄2”-20 SAE 12 3⁄4” 11⁄16”-12 SAE 6 3⁄8” 9⁄16”-18 SAE 16 1” 15⁄16”-12 SAE AN THREAD SIZE CHART 320 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing A | ALUMINUM PIPE FITTINGS AND COUPLERS MALE PIPE NIPPLE 617-6150 ALLEN PIPE PLUG $499 2/PK 1⁄8” $499 EA 617-6203 1⁄8” 617-6151 1⁄4” 799 EA 599 2/PK 617-6152 3⁄8” 999 EA 617-6204 1⁄4” 799 2/PK 617-6205 3⁄8” 599 EA ALUMINUM PIPE COUPLER $599 EA 617-6206 1⁄2” 799 EA 617-6144 699 EA 617-6207 3⁄4” 1199 EA 1⁄8” 899 EA 617-6208 1” 617-6145 1⁄4” 617-6146 3⁄8” 1099 EA PIPE BUSHING REDUCER 617-6147 1⁄2” 617-6155 1⁄4” - 1⁄8” $1399 EA $599 EA ALUMINUM FEMALE PIPE TEE 1499 EA 617-6156 3⁄8” - 1⁄4” 617-6171 1899 EA 617-6157 3⁄8” - 1⁄8” 599 EA 1⁄8” 2599 EA 617-6158 1⁄2” - 3⁄8” 699 EA 617-6172 1⁄4” 617-6160 1⁄2” - 1⁄8” 799 EA 617-6173 3⁄8” 799 EA 617-6174 1⁄2” B | ALUMINUM PIPE TO AN ADAPTERS BLUE, BLACK AND NICKEL PLATED ALUMINUM STRAIGHT FLARE ADAPTERS BLUE PRICE BLACK PRICE NICKEL PRICE 617-6041 $499 EA 617-60411 $599 EA N/A N/A AN 3 1⁄8” 399 EA 617-95201 499 EA N/A N/A 499 EA 617-60421 599 EA N/A N/A AN 3 1⁄8” FEMALE 617-9520 399 EA 617-95211 399 EA N/A N/A 599 EA 617-60431 599 EA N/A N/A AN 4 1⁄8” 617-6042 599 EA 617-60441 599 EA 617-60440 $699 EA AN 4 1⁄8” FEMALE 617-9521 599 EA 617-60451 599 EA 617-60450 699 EA 617-6043 599 EA 617-60461 599 EA 617-60460 699 EA AN 4 1⁄4” 699 EA 617-60471 699 EA N/A N/A AN 6 1⁄4” 617-6044 699 EA 617-60481 699 EA 617-60480 699 EA 699 EA 617-60491 699 EA 617-60490 899 EA AN 6 1⁄8” 617-6045 1199 EA 617-60601 1199 EA N/A N/A AN 6 3⁄8” 617-6046 699 EA 617-60501 799 EA 617-60500 1699 EA 1299 EA AN 8 1⁄4” 617-6047 1099 EA 617-70031 1199 EA 617-70030 1399 EA AN 8 3⁄8” 617-6048 1099 EA 617-60511 1099 EA 617-60510 1399 EA 1099 EA 617-60521 1099 EA 617-60520 AN 8 1⁄2” 617-6049 N/A 1399 EA N/A N/a N/A N/A AN 10 3⁄4” 472-981613 1599 EA N/A N/A N/A AN 10 1⁄2” 617-6050 AN 10 3⁄8” 617-7003 AN 12 3⁄4” 617-6051 617-6052 AN 12 1⁄2” AN 16 1” 617-6053 AN 16 3⁄4” 617-6054 45° FLARE ADAPTERS BLUE PRICE BLACK PRICE NICKEL PRICE 617-6093 $899 EA 617-60931 $899 EA N/A N/A AN 3 1⁄8” 799 EA N/A N/A AN 4 1⁄8” 617-6094 799 EA 617-60941 899 EA 617-60950 $1399 EA 999 EA 617-60960 AN 6 1⁄4” 617-6095 999 EA 617-60951 1599 EA 617-60970 1699 EA 2199 EA 617-60980 1999 EA AN 8 3⁄8” 617-6096 999 EA 617-60961 2199 EA AN 10 1⁄2” 617-6097 1799 EA 617-60971 AN 12 3⁄4” 617-6098 2199 EA 617-60981 90° FLARE ADAPTERS BLUE PRICE BLACK PRICE NICKEL PRICE 617-6079 $899 EA 617-60791 $899 EA N/A N/A AN 3 1⁄8” 599 EA N/A N/A 999 EA N/A N/A AN 3 1⁄8” FEMALE 617-9522 499 EA 617-95221 499 EA N/A N/A 899 EA N/A N/A AN 4 1⁄8” 617-6080 999 EA 617-60801 799 EA 617-60820 $1099 EA AN 4 1⁄8” FEMALE 617-9523 499 EA 617-95231 999 EA 617-60830 1399 EA 617-6081 899 EA 617-60811 1199 EA 617-60840 1599 EA AN 4 1⁄4” 1399 EA N/A N/A AN 6 1⁄4” 617-6082 799 EA 617-60821 999 EA 617-60860 1399 EA 1899 EA AN 6 1⁄8” 617-6083 999 EA 617-60831 1499 EA 617-60870 1799 EA AN 6 3⁄8” 617-6084 1199 EA 617-60841 1399 EA 617-60880 2499 EA 2099 EA 617-60890 1999 EA AN 8 1⁄4” 617-6085 1399 EA 617-60851 N/a 617-60900 N/A AN 8 3⁄8” 617-6086 999 EA 617-60861 N/a N/A N/A N/a N/A AN 8 1⁄2” 617-6087 1499 EA 617-60871 AN 10 1⁄2” 617-6088 1399 EA 617-60881 AN 12 3⁄4” 617-6089 2099 EA 617-60891 AN 12 1⁄2” 617-6090 1599 EA N/A AN 16 1” 617-6091 1999 EA N/A AN 16 3⁄4” 617-6092 1999 EA N/A FLARE TO PIPE TEE BLUE BLACK PIPE TEE ON BLUE BLACK 617-6106 617-61061 AN 3 ( 1⁄8\" NPT) 617-6110 617-61101 $1099 EA AN 3 ( 1⁄8\" NPT) $999 EA AN 4 ( 1⁄8\" NPT) 617-6111 617-61111 1199 EA 617-6107 617-61071 AN 6 ( 1⁄4\" NPT) 617-6112 617-61121 1299 EA AN 4 ( 1⁄8\" NPT) 617-61081 1099 EA 617-6108 617-61091 1199 EA AN 8 ( 3⁄8\" NPT) 617-6113 617-61131 1499 EA AN 6( 1⁄4\" NPT) 617-61011 1499 EA AN 10 ( 1⁄2\" NPT) 617-6114 617-61141 2099 EA 617-6109 1699 EA AN 12 ( 3⁄4\" NPT) 617-6115 617-61151 3599 EA AN 8 ( 3⁄8\" NPT) 617-6101 AN 10 ( 1⁄2\" NPT) 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 321

FITTINGS || Plumbing A | CARBURETOR FITTINGS D | WELD BUNG FITTINGS --AN 6 Holley Single --AN 8 Holley 4150 / Feed 600-660 Series, 4160 Dual Feed 750 SIZE STEEL PRICE ALUMINUM PRICE --Holley Dual feed thru Dominator 1⁄8” NPT FEMALE 617-6701 $399 EA 617-6801 $499 EA 4010-4011 Series and 1350 Series 1⁄4” NPT FEMALE all two barrel series --Quadrajet up to 1974 3⁄8” NPT FEMALE 617-6702 399 EA 617-6802 499 EA with 9⁄16” -24 thread -- 7⁄8” -20 thread 1⁄2” NPT FEMALE 617-6703 499 EA 617-6803 699 EA 3⁄4” NPT FEMALE 617-6704 599 EA 617-6804 799 EA 617-4020 AN 6 MALE $1099 PR 617-4021 AN 8 MALE $1199 PR 1” NPT FEMALE 617-6706 799 EA 617-6806 1099 EA N/A 1399 EA 617-2248 AN 8 FEMALE 3499 EA 617-2192 AN 8 FEMALE 999 EA AN 4 MALE N/A 617-6808 AN 6 MALE 617-7104 699 EA 427-1081 9⁄16” NYLON FITTING GASKET 383 PR 427-26102 7⁄8\" NYLON GASKET 406 PR AN 8 MALE 617-7106 399 EA 617-7204 699 EA AN 10 MALE 617-7108 399 EA 617-7206 699 EA --AN 6 Holley 4150 / 4160 --AN 6 Ford, Chrysler AN 12 MALE 617-7110 499 EA 617-7208 799 EA Dual Feed 750 thru andearly Chevy AN 16 MALE 617-7112 599 EA 617-7210 1199 EA Dominator 1350 Series fuel pumps 617-7116 999 EA 617-7212 1599 EA --Quadrajet up to 1974 -- 1⁄2” - 20 inverted 1199 EA 617-7216 -- 7⁄8” -20 thread flare thread 617-4033 E | AN HOSE TEST FITTINGS 617-4022 $1099 PR $899 EA 617-6630 AN 3 $899 EA 427-26102 7⁄8” NYLON FITTING GASKET 406 PR 617-6640 AN 4 899 EA --AN 6 Chevy fuel pumps --AN 6 Carter AFB 617-6660 AN 6 899 EA (1970 and later) --Carter two and 617-6680 AN 8 999 EA --Holley inline filters four barrel -- 5⁄8” - 18 inverted -- 5⁄8 “-20 thread 617-6700 AN 10 1199 EA flare thread 617-4024 617-6720 AN 12 1399 EA 617-6760 AN 16 899 EA 617-4038 $899 EA $899 EA 617-6625 COMPLETE KIT-ONE OF EACH 6099 KT --AN 6 Holley Single F | INLINE FUEL PRESSURE ADAPTER --Feed 600-660 Series --Use for inline pressure port and all two barrel series --AN 6 Carter AFB --Banjo fitting assembles Edelbrock 617-7000 AN 6-AN 6 WITH 1⁄8” NPT PORT - BLUE $1199 EA directly to hose --Assembles 617-7001 AN 8-AN 8 WITH 1⁄8” NPT PORT - BLUE 1499 EA -- 9⁄16” -24 thread directly on hose -- 5⁄8”-20 banjo fitting 617-70001 AN 6-AN 6 WITH 1⁄8” NPT PORT - BLACK 1199 EA 617-70011 AN 8-AN 8 WITH 1⁄8” NPT PORT - BLACK 1499 EA 617-4023 $2499 EA 617-4027 $1999 EA 617-7005 AN 6 TO 3⁄8” NPT WITH 1⁄8” NPT PORT - BLUE 1199 EA 427-1081 9⁄16” NYLON FITTING GASKET 383 PR 617-7008 AN 8 TO 3⁄8” NPT WITH 1⁄8” NPT PORT - BLUE 1499 EA --AN 6 Quadra-jet, --AN 10 3⁄8” NPT Holley G | REPLACEMENT O-RINGS 1975 and later Electric fuel pumps --1”-20 thread and regulators FOR AN FITTINGS 617-4035 -- 3⁄8” NPT --Designed for standard fuel or oil --EPR2 O-rings are for alcohol or nitro $1099 EA 617-7003 $1099 EA 617-3472 AN 3, NITRILE 1 $499 BG 617-3462 AN 3, EPR2 $499 BG AN 4, EPR2 BLUE BLACK HOSE PORT STYLE PRICE 617-3473 AN 4, NITRILE 1 499 BG 617-3463 AN 6, EPR2 499 BG 617-7007 617-70071 AN 6 AN 10 STR $999 EA 617-3474 AN 6, NITRILE 1 699 BG 617-3464 AN 8, EPR2 699 BG 617-3475 AN 8, NITRILE 1 699 BG 617-3465 AN 10, EPR2 799 BG 617-7010 617-70101 AN 6 AN 6 STR 1099 EA 617-3476 AN 10, NITRILE 1 699 BG 617-3466 AN 12, EPR2 799 BG AN 8 STR 1099 EA 617-3477 AN 12, NITRILE 1 799 BG 617-3467 AN 16, EPR2 799 BG 617-7011 617-70111 AN 6 AN 6 STR 1099 EA 617-3497 AN 16, NITRILE 1 799 BG 617-3468 AN 20, EPR2 799 BG AN 8 STR 1399 EA 617-3498 AN 20, NITRILE 1 899 BG 617-3469 1299 BG B | HIGH-FLOW 617-7012 617-70121 AN 8 AN 10 STR 1499 EA O-RING PORT 617-7013 617-70131 AN 8 AN 8 STR 1999 EA H | STAT-O-SEALS FITTINGS 617-7014 617-70141 AN 8 AN 10 STR 2299 EA 617-7015 617-70151 AN 10 AN 12 STR 2299 EA --Synthetic rubber o-ring bonded to an aluminum crush washer AN 10 STR 2399 EA --Withstands temperatures from 85°F - 450°F 617-7016 617-70161 AN 10 617-7017 617-70171 AN 10 617-7018 617-70181 AN 12 BLUE BLACK HOSE PORT STYLE PRICE 617-9061 AN 4 $199 EA 617-7019 617-70191 AN 12 AN 12 STR $2399 EA AN 6 617-9062 AN 8 399 PR 617-7020 617-70201 AN 6 AN 6 45° 2299 EA 617-9063 AN 10 499 PR AN 8 45° 2099 EA 617-9064 499 EA 617-7021 617-70211 AN 8 AN 10 45° 3599 EA AN 12 45° 3599 EA 617-7022 617-70221 AN 10 AN 6 90° 1899 EA J | TEFLON SEALING WASHERS AN 8 90° 2099 EA FOR BULKHEAD FITTINGS 617-7023 617-70231 AN 12 AN 10 90° 3599 EA AN 12 90° 4599 EA --Use to seal bulkhead fittings to fuel cells, 617-7024 617-70241 AN 6 AN 10 STR 1199 EA oil tanks and other low pressure situations --Specify AN size when ordering 617-7025 617-70251 AN 8 617-7026 617-70261 AN 10 617-7027 617-70271 AN 12 617-1097-SIZE AN 6, 8 $199 PR 617-1097-SIZE AN 10, 12 OR 16 299 PR 617-7028 617-70281 AN 4 C | ENDURA FINISH PIPE PLUGS K | INLINE FITTING WITH PRESSURE TAP 617-66203 1⁄8” NPT $799 PR 617-7029 AN 4 WITH 1⁄8” NPT FEMALE $1299 EA 1⁄4” NPT AN 6 WITH 1⁄8” NPT FEMALE 617-66204 3⁄8” NPT 799 PR 617-7034 AN 8 WITH 1⁄8” NPT FEMALE 1299 EA 617-66205 1⁄2” NPT 799 PR 617-7035 AN 10 WITH 1⁄8” NPT FEMALE 1299 EA 617-66206 3⁄4” NPT 699 EA 617-7036 1299 EA 617-66207 699 EA 322 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Plumbing TUBE NUT A | REDUCERS AND EXPANDERS B | TUBE NUT TUBING REDUCERS - STRAIGHT RED/BLUE BLACK PRICE COUPLERS AN-8 NUT TO AN -6 HOSE 617-220107 617-2201071 $1099 EA AND SLEEVES TUBE SLEEVE 617-2201091 1399 EA AN-10 NUT TO AN -8 HOSE 617-220109 617-2201151 2499 EA --You need to flare the tube to 37° FLARED BLACK 37° to match the AN fittings TUBE END AN-16 NUT TO AN -12 HOSE 617-220115 617-2230071 PRICE --Not for use with 45° flared lines REDUCERS - 30 RED/BLUE 617-2230091 $2299 EA AN-8 NUT TO AN -6 HOSE 617-223007 617-2230151 2249 EA TUBE NUT COUPLERS BLACK 3239 EA AN-10 NUT TO AN -8 HOSE 617-223009 617-2245071 QTY AN TUBE BLUE PRICE BLACK PRICE 617-2245091 PRICE 617-6055 $699 SET/6 617-60551 $699 SET/6 AN-16 NUT TO AN -12 HOSE 617-223015 617-2245151 $2199 EA 6 3 3⁄16” REDUCERS - 45 RED/BLUE BLACK 2399 EA 617-6056 699 SET/6 617-60561 699 SET/6 AN-8 NUT TO AN -6 HOSE 617-224507 617-2260071 3149 EA 6 4 1⁄4” 617-6057 599 PR 617-60571 599 PR 617-2260091 617-6058 599 PR 617-60581 599 PR AN-10 NUT TO AN -8 HOSE 617-224509 617-2260151 PRICE 2 6 3⁄8” 599 EA BLACK $2069 EA 617-6059 599 EA 617-60591 AN-16 NUT TO AN -12 HOSE 617-224515 617-2290071 2599 EA 2 8 1⁄2” PRICE REDUCERS - 60 RED/BLUE 617-2290091 3239 EA $599 SET/6 AN-8 NUT TO AN -6 HOSE 617-226007 617-2290151 1 10 5⁄8” BLACK PRICE SLEEVES 599 SET/6 AN-10 NUT TO AN -8 HOSE 617-226009 617-2312071 $2199 EA 499 PR 617-2312091 2399 EA QTY AN TUBE BLUE PRICE BLACK 499 PR AN-16 NUT TO AN -12 HOSE 617-226015 617-2312151 3599 EA 617-6063 $599 SET/6 617-60631 499 EA REDUCERS - 90 RED/BLUE BLACK 6 3 3⁄16” AN-8 NUT TO AN -6 HOSE 617-229007 617-2315071 PRICE 617-6064 599 SET/6 617-60641 $1399 EA 617-2315091 $2599 EA 6 4 1⁄4” 617-6065 499 PR 617-60651 999 EA AN-10 NUT TO AN -8 HOSE 617-229009 617-2315151 2899 EA 617-6066 499 PR 617-60661 BLACK 3149 EA 2 6 3⁄8” 617-6067 499 EA 617-60671 1599 EA AN-16 NUT TO AN -12 HOSE 617-229015 617-2318071 1099 EA REDUCERS - 120 RED/BLUE 617-2318091 PRICE 2 8 1⁄2” AN-8 NUT TO AN -6 HOSE 617-231207 617-2318151 $2699 EA 2999 EA 1 10 5⁄8” AN-10 NUT TO AN -8 HOSE 617-231209 BLACK 3599 EA 617-2201051 C | TUBING TO AN AN-16 NUT TO AN -12 HOSE 617-231215 617-2201111 PRICE FLARE ADAPTERS REDUCERS - 150 RED/BLUE 617-2201131 $2499 EA AN-8 NUT TO AN -6 HOSE 617-231507 BLACK 2899 EA 617-63920 AN6 FEMALE TO 3⁄8” TUBING 617-2230051 3999 EA 617-63921 AN6 MALE TO 3⁄8” TUBING AN-10 NUT TO AN -8 HOSE 617-231509 617-2230111 617-2230131 PRICE 617-63922 AN8 FEMALE TO 1⁄2” TUBING AN-16 NUT TO AN -12 HOSE 617-231515 BLACK $799 EA 617-63923 AN8 MALE TO 1⁄2” TUBING REDUCERS - 180 RED/BLUE 617-2245051 1699 EA AN-8 NUT TO AN -6 HOSE 617-231807 617-2245111 2249 EA 617-2245131 AN-10 NUT TO AN -8 HOSE 617-231809 BLACK PRICE 617-231815 617-2260051 $1999 EA AN-16 NUT TO AN -12 HOSE 617-2260111 2609 EA 617-2260131 3499 EA Tubing Diameters EXPANDERS - STRAIGHT RED/BLUE BLACK 1⁄4” 3⁄8” AN-6 NUT TO AN -8 HOSE 617-220105 617-2290051 PRICE Tube Beader 617-2290111 $1899 EA AN-10 NUT TO AN -12 HOSE 617-220111 617-2290131 2799 EA BLACK 3399 EA AN-12 NUT TO AN -16 HOSE 617-220113 617-2312051 617-2312111 PRICE EXPANDERS - 30 RED/BLUE 617-2312131 $1999 EA AN-6 NUT TO AN -8 HOSE 617-223005 BLACK 2999 EA D | ALUMINUM FUEL LINE 1⁄2” 5⁄8” 617-2315051 3149 EA AN-10 NUT TO AN -12 HOSE 617-223011 617-2315111 --Easy to flare and bend $1099 ROLL 617-2315131 PRICE --Save weight and money 1499 ROLL AN-12 NUT TO AN -16 HOSE 617-223013 BLACK $1799 EA --Not recommended for high pressure applications 1299 ROLL 617-2318051 2799 EA 1699 ROLL EXPANDERS - 45 RED/BLUE 617-2318111 3499 EA 2099 ROLL AN-6 NUT TO AN -8 HOSE 617-224505 617-2318131 910-11429-10 1⁄4” O.D. X 10 FT. 1699 ROLL PRICE 910-11429-20 1⁄4” O.D. X 20 FT. 2099 ROLL AN-10 NUT TO AN -12 HOSE 617-224511 $2499 EA 2499 ROLL 3059 EA 910-11430-10 3⁄8” O.D. X 10 FT. 2299 ROLL AN-12 NUT TO AN -16 HOSE 617-224513 3599 EA 910-11430-20 3⁄8” O.D. X 20 FT. 2699 ROLL 910-11430-30 3⁄8” O.D. X 30 FT. 3099 ROLL EXPANDERS - 60 RED/BLUE PRICE 4450 EA AN-6 NUT TO AN -8 HOSE 617-226005 $2249 EA 910-11440-10 1⁄2” O.D. X 10 FT. 4216 EA 2969 EA 910-11440-20 1⁄2” O.D. X 20 FT. 4216 EA AN-10 NUT TO AN -12 HOSE 617-226011 3419 EA 910-11440-30 1⁄2” O.D. X 30 FT. AN-12 NUT TO AN -16 HOSE 617-226013 PRICE 910-11441-10 5⁄8” O.D. X 10 FT. $2499 EA 910-11441-20 5⁄8” O.D. X 20 FT. EXPANDERS - 90 RED/BLUE 3299 EA 910-11441-30 5⁄8” O.D. X 30 FT. AN-6 NUT TO AN -8 HOSE 617-229005 3329 EA 425-008ERL 3⁄8” TUBE BEADER AN-10 NUT TO AN -12 HOSE 617-229011 425-009ERL 1⁄2” TUBE BEADER 425-010ERL 5⁄8” TUBE BEADER AN-12 NUT TO AN -16 HOSE 617-229013 EXPANDERS - 120 RED/BLUE AN-6 NUT TO AN -8 HOSE 617-231205 AN-10 NUT TO AN -12 HOSE 617-231211 AN-12 NUT TO AN -16 HOSE 617-231213 E | VACUUM AND BRAKE EXPANDERS - 150 RED/BLUE BOOSTER PORT AN-6 NUT TO AN -8 HOSE 617-231505 - 3⁄8” NPT aluminum fitting screws into the intake manifold AN-10 NUT TO AN -12 HOSE 617-231511 behind the carburetor and has two 1⁄8” NPT ports --Includes fittings that accept a 1⁄4” hose and a 3⁄8” hose AN-12 NUT TO AN -16 HOSE 617-231513 -- 1⁄8” NPT plug is also included EXPANDERS - 180 RED/BLUE AN-6 NUT TO AN -8 HOSE 617-231805 AN-10 NUT TO AN -12 HOSE 617-231811 916-11020 $2499 EA AN-12 NUT TO AN -16 HOSE 617-231813 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 323

TOOLS || AN Wrenches A | ALUMINUM AN WRENCHES G | VISE SOFT-JAW INSERTS --Designed with the correct length handle to avoid over-tightening --Will keep your AN fittings looking great during and after assembly --Each wrench has the fitting size stamped on it for easy identification --Aluminum insert firmly holds the hex portion of the fitting without --AN 3, AN 4, AN 6, AN 8, AN 10, AN 12, AN 16 and AN 20 marring the anodized or plated finish --Includes free carrying case --Can be used with any size AN fittings from AN 3 to AN 32 --As a bonus, the long horizontal pockets in the inserts will hold the braided hose while cutting 617-3661 $1999 PR 910-89800 $5999 SET H | KOUL INSTALLATION B | AN WRENCH SET TOOL FOR BRAIDED HOSE --30° and 45° angle ends for each size are on different 617-9510 AN 4, AN 6, AN 8 $7350 SET wrenches and allow you to AN 6, AN 8, AN 10 hold the adapter with one 617-9512 AN 10, AN 12, AN 16 7840 SET wrench and loosen the hose 617-9511 AN 4 THROUGH AN 16 PRO KIT 8820 SET with another 617-9513 14700 SET --Anodized aluminum --Won’t damage fittings $4999 SET --Sizes AN 6, AN 8, AN 10 and AN 12 910-89810 C | AN FITTING J | SOCKETLESS FITTING WRENCH SET INSTALLATION TOOL AND LUBE --Stamped for easy identification --Lube the inside of the hose, clamp the hose and give the lever a pull --Includes AN# 4, 6, 8, 10, 12, --For AN 4, 6, 8 push-on, straight fittings only and 16Sizes AN 6, AN 8, AN 10 and AN 12 $3999 SET 617-3632 INSTALLATION TOOL $4499 EA 910-89811 617-3553 LUBE, PINT 1499 EA K | TEFLON HOSE TOOL --Designed to seat Teflon tube against a sleeve --Use with smooth-bore Teflon hose in sizes AN 3, AN 4, AN 5, AN 6, AN 8, AN 10 and AN 12 D | AN FITTING HOLDING FIXTURE 617-3646 $3999 EA --Allows you to clamp the fitting securely in a vise, and not tear it up --Made of high-impact plastic 910-89830 $2499 EA ALU-AL | SCSOONRICTAMLESNETAL E | ADJUSTABLE MINUM --Immediate and permanent AN WRENCH field repairs --8” aluminum adjustable wrench --For damaged hose ends --Opens to 1.25” --For 37° adapter fitting cones and seats 910-89805 $3499 EA --Easily installed F | HEAVY --Includes 4 each of the following DUTY BRAIDED sizes: -3, -4, -6, -8, -10, -12, -16 HOSE CUTTER 425-169101ERL CONICAL SEAL ASSORTMENT - 30 PIECES $7174 EA --Precision ground blades AN-3 CONICAL SEALS - 4 PIECES --Makes cutting stainless steel 425-169103ERL AN-4 CONICAL SEALS - 4 PIECES 1509 EA hose a breeze 425-169104ERL AN-6 CONICAL SEALS - 4 PIECES 1509 EA --181⁄2” cuts up to AN 16 hose 425-169106ERL AN-8 CONICAL SEALS - 4 PIECES 1509 EA 425-169108ERL AN-10 CONICAL SEALS - 4 PIECES 1509 EA 425-169110ERL 1509 EA 910-89802 181⁄2” 1509 EA $1999 EA 425-169212ERL AN-12 CONICAL SEALS - 4 PIECES 324 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Jacks and Stands D | BRUNNHOELZL A | GOJAC SELF ALUMINUM JACK LOADING DOLLIES --3 pump version --5211 model is for tires up to 11” wide, 32” tall and 1250 lb. each --Weighs only 32 lbs. --6200 model is good for tires 13” wide, 36” tall and 1550 lb. each --Minimum height 3 ¼”, --We recommend the storage rack to keep your investment up off maximum height is 171⁄8” the floor and organized when not in use --Includes 40” long --Sold as each --1 -piece handle --Black only 910-82365 3-PUMP JACK $87499 EA 910-82366 DIRT WINGS 6499 EA 880-5000 5211 MODEL GOJAC $22320 EA 6200 MODEL GOJAC 880-6200 STORAGE RACK 23920 EA 880-456 9265 EA E | GO-CART $28000 PR B | 1000 LB. DOLLIE WHEEL DOLLIES $14999 SET --Heavy-duty steel construction --A set of these wheel dollies allows one 7999 PR --Available in sets of two or four person to move a car around in their garage --Durable powder coat finish --Each dolly rated to support 1000 lb. --Flat free polymer wheels --14” wide, 15” long for easy rolling --Non-skid polymer rollers 910-81107 SET OF FOUR resists load slippage 910-81109 SET OF TWO --Expandable frame accommodates variable tire sizes $11999 PR --Move heavy loads with confidence and ease --1,500 lbs load rating 910-0595 F | ALUMINUM JACK STANDS --Made of 3⁄16” material but still weigh less than 7 lb. each --151⁄2” x 10” footprint offers superior stability and won’t sink into the dirt --3000 lb. capacity 910-81140 G | WIDE BASE $14999 SET OF 4 C | BERT ALUMINUM WEIGHS JUST JACK STANDS BUMPER JACK 55 LB. $112999 EA --142 sq. in. of support --Air operated @ min 50 psi --Won’t sink into the ground --Completely collapsible and --Large 15” x 91⁄2” base weighs only 55 lb. --12” height, steel construction --Ideal for cars with 910-81103 tubular bumpers --36” maximum lift height H | HEAVY DUTY --Rated to 2500 lb. WHEEL DOLLIES 736-5000 JACK --Constructed of 1⁄4” steel plate that is professionally primed and painted --Four zinc plated ball bearing castors contain extra wide rollers made from shock resistant phenolic plastic --Each dolly can support up to 1500 lb., and up to 6000 lb. with four dollies --Wheel dolly measures 12” x 16” to easily accommodate virtually any size tire Add either the rolling rack or wall mount rack to keep them organized 1 910-81108 SET OF FOUR DOLLIES $15999 SET OF 4 2 910-81138 ROLLING RACK 3 910-81141 WALL MOUNT RACK 7999 EA 4 LUG DOLLY ROLL AROUND ADAPTER 910-98077 5 LUG DOLLY ROLL AROUND ADAPTER 3999 EA 910-98074 MOD DOLLY ROLL AROUND ADAPTER 910-98118 W5 DOLLY ROLL AROUND ADAPTER 11999 PR 910-59059 11999 PR 11999 PR 12499 PR 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 325

TOOLS || Scales A | LONGACRE ACCUSET II SCALES D | ECONOMY $69999 EA SCALE SYSTEM --Push one button for all 4 wheel weights plus cross weight --Push a second button for partial % --Perfect for Dwarf cars, --Baseline memory recall Pony Stock and Tuner classes --Heavy duty red HiFlex cables with billet AN connectors --Oversized, easy to read digital display --4 LMFTM swirl finished 15” x 15” low profile pads --Display box mounted in carrying case --1500 lb. per pad capacity, 6000 lb. total --20 ft. cables are labeled for correct hook-up --2-year limited warranty --.01 percent accuracy --141⁄2“ x 91⁄2“ x 21⁄2” pads --1250 lb. per pad, 5000 lb. total capacity --Powered by four AA batteries 586-67650 475-72593 WITH FREE SCALE PAD BOX $111999 KIT 475-72592 ACCUSET II SCALES WITH CART 129499 KIT B | E-Z WEIGH SCALES E | 7000LB SLIM WIRELESS --15” x 15” x 21⁄2” billet, flat scale pads VEHICLE SCALE --1500 lb. capacity per pad, 6000 lb. total --Certified to .01 percent accuracy --15\" x 15\" slim aluminum -- 1⁄2” display characters scale pads (15⁄16\" thick) --Backlit display --Low angle drive-up weighing --Standard 9V battery operation pads (no ramps necessary) --Large, easy-to-read display of weights and percentages --Live stream data feed via USB cable to computer --2 year full warranty --Backlit LCD screen and control buttons --Foam lined hard shell case with wheels and extendable handle --AA batteries included 586-67644 $82999 SET TABLET INCLUDED 300-500 WITH FREE SCALE PAD BOX $114500 KIT F | COMPUTERSCALES® 300-499 E-Z WEIGH SCALES WITH CART 132000 KIT WIRELESS TABLET XLI™ --7\" Android™ tablet with high resolution screen, folio case, screen protector and stylus included --Ready to use right out of the box --Customizable Display --Show only what you want to see, rotate or change the car icon, change the partial weight % resolution or weight units 475-2715 WITH FREE SCALE PAD BOX $199999 KIT 475-2714 COMPUTERSCALES WIRELESS TABLET XLI SCALES WITH CART 217499 KIT C | GEN3 1 WEIGH G | iRACEWEIGH WIRED SCALE SYSTEM WIRELESS SCALE SYSTEM --Full-time display of four individual wheel weights and total vehicle weight - or - ALL percentages at once on --Lets you scale your car using an one oversized, easy-to-read display iPhone, iPad, iPod touch, or any --Touch of one button displays either weights or percentages smartphone or tablet from Android™ --1 slot memory --Communicates with Intercomp scales --Carrying case for electronics and tangle free cables through fully integrated RFX™ Wireless Weighing Technology providing you with complete control over your scales --15\" x 15\" x 2.5\" (381 x 381 x 64mm) Wireless RFX™ Billet Pads 910-82115 WITH FREE SCALE PAD BOX $89999 KIT 300-656 WITH FREE SCALE PAD BOX $174599 KIT 910-82116 1 WEIGH SCALE SYSTEM WITH CART 107499 KIT 300-655 IRACEWEIGH WIRELESS SCALE SYSTEM WITH CART 192099 KIT 326 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Scales D | SW787 WIRELESS A | SW650 SCALE SYSTEM QUICK WEIGH WIRELESS SCALES --15” x 15” x 2.5” wireless billet pads --RaceWeigh software for PC --No cables, no antennas --AA alkaline batteries for scale pads --Completely portable --1,500 lb. pad capacity, 6,000 lb. system capacity --Uses AA batteries, 400 hr. average life --2 year warranty --15” x 15” x 21⁄2” billet flat scale pads --Laptop not included --1,500 lb. capacity per pad, 6,000 lb. total --Has printer and computer interface outputs 300-787 WITH FREE SCALE PAD BOX $154599 KIT --Displays to .01 lb. 300-786 SW787 WIRELESS SCALE SYSTEM WITH CART 172099 KIT --2 year warranty --Now Bluetooth compatible 300-650 WITH FREE SCALE PAD BOX $174599 KIT 300-649 SW650 QUICK WEIGH WIRELESS SCALES WITH CART 192099 KIT E | COMPUTERSCALES® HYBRID DX3 --9.7\" Android™ tablet included with high resolution screen, case, screen protector and charger included --Change the main screen display order to suit your preferences - show only what you want to see, rotate or change the car icon, change the partial weight % resolution or weight units --Alternate background skins, Standard Red, Industrial Black and High Contrast White - easier to read in bright sunlight --Name your memory locations - title, date, track, etc. - your choice --Note taking and main screen shown side-by-side --Keep a record of the changes made and the results B | COMPUTERSCALES® HYBRID DX2 --Save all your stored weights and notes with the tap of a button --Easily email or connect to PC for download --7\" Android™ tablet included with high resolution screen, case, screen protector and charger included --Change the main screen display order to suit your preferences - 475-726171 WITH FREE SCALE PAD BOX $169999 KIT show only what you want to see, rotate or change the car icon, change the partial weight % resolution or weight units 475-726172 VISION SCALE SYSTEM WITH CART 187499 KIT --Name your memory locations - title, date, track, etc. - your choice --Note taking --Keep a record of the changes made and the results --Save all your stored weights and notes with the tap of a button --Easily email or connect to PC for download F | SW777 475-726131 WITH FREE SCALE PAD BOX $139999 KIT WIRELESS SCALES 475-726132 DX1 SCALE SYSTEM WITH CART 157499 KIT --No cables, no antennas --Has printer interface outputs --Completely portable --Displays to .01 lb. --Uses AA batteries, 400 hr. average life --USB PC radio --15” x 15” x 21⁄2” billet flat scale pads --2 year warranty --1,500 capacity per pad, 6000 lb. total --Includes RaceWeigh software for PC --Includes 6 ft. serial cable for computer --Now Bluetooth compatible 300-777 WITH FREE SCALE PAD BOX $194500 KIT 300-776 SW777 WIRELESS SCALES WITH CART AND PAD BOX 212099 KIT G | CHASSIS $1499 EA C | E-Z WEIGH KART $104500 SET SET-UP/TIRE CHART SCALE SYSTEM --Punched for 3 ring binder --400 lb (200 kg) pad capacity --1 pad of 50 sheets --1,600 lb (800 kg) 475-22528 system capacity --Certified to 0.1% accuracy --USB & RS232 output 300-170130 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 327

TOOLS || Scale and Chassis A | FRONT END A MUST FOR EVERY ALIGNMENT SCALE OWNER TURN PLATES $84900 PR F | LIQUID LEVEL --Heavy duty roller bearings make settings a snap --Quick and easy, --Measures 13” x 15” x 11⁄2” simply fill with fluid --Range from plus or minus 35° swing, --Use for leveling scales can be zeroed with car in place or wheel pads --Correctly turn each wheel 20° --Impact resistant, two without scrubbing the tires 12” containers and 300-7040 12 ft. connecting hose 910-82650 $2999 EA B | ALUMINUM $74999 PR G | ALUMINUM TURN PLATES TURN PLATES --Free floating in 2 directions --Low profile design at .5\" thick eliminates bind --Includes a locking pin to ensure the turn plates stay at zero degrees --Reads to 1/2° - Degrees can be --Engraved in one degree increments to twenty zeroed with the car in place degrees in both directions --Low profile, only 1\" tall --360 Degree rotation on internal bearings --Can be used on top of scale pads --Large pads measure 14-1/8\" in diameter --Weight capacity - 1500 lbs per plate 475-79800 300-3600 $22499 PR C | SCALE PAD $99500 SET H | LASER CHASSIS LEVELER WITH HEIGHT CHECKER & LASER LEVEL ROLL OFF PAD --Check actual ride height when car is on scales or on a leveler --Designed to fit any 15” --Includes an easy to setup self-leveling beam laser, 4 easy-to-read scale with a 21⁄2” pad thickness targets that are held to the frame with magnets and a separate pad --Enables the car to be rolled off the scale leveling target for leveling the scale pads and establishing pads and back on with little effort the 'ground plane' to measure chassis heights --All aluminum construction --Laser stand includes bracket with knob for major height 300-7050 adjustments or make minor adjustments with the leveling screws on the base plate D | \"3D\" BALL --Comes with silver storage case - 113⁄4\" x 71⁄4\" x 53⁄4\" ROLLER --Target range: 2-6\" or 2-8\" SIDESLIDERS™ 475-72981 1-41⁄2\" CHECKER $22499 EA --Move in 3 directions - sideways, 2-6\" CHECKER front & back, and they rotate 475-72983 2-8\" CHECKER 22499 EA --Great for checking wheel 475-72985 22499 EA weights with wheels turned --Install under both front wheels J | IRACEWEIGHTM --Supported on ball bearings made from a low friction polymer MODULE --Set includes 2 \"3D\" Ball Roller SideSliders™ and 2 spacers to re-level your setup --Communicates directly with --Use on any smooth floor surface your Intercomp RFXTM Wireless Scales --Must be used under scale pads or Intercomp Cabled --Scales with RS232 output 475-72875 $39999 PR --View and save live weights, export data to a spreadsheet, or email saved reports E | COIL-OVER SHOCK --Allows direct communication with scales SET-UP TOOL --For iPhone®, iPod® and iPad® (not included) 300-170250 --Allows you to simulate the installed length of your coilovers, which will give you a finished ride height --Fits 1⁄2” or 5⁄8” coil-over mounts --Safely adjusts from 131⁄2” - 21” 916-36037 $5999 PR $34900 EA 328 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Scale and Chassis F | SCALE CARTS BIG 8” WHEELS A | QUIK RAMP SCALE RAMPS WITH ROLL-OFF --21” x 21” x 35” $29999 EA --Assembly required --30\"L x 2.5\"H x 12\"W (762x64x305mm) --Scale system not included --7.8° incline 910-82104 --12\" (305mm) roll-off area --Solid construction, supports up to a 6,000 lb. (2,721kg) vehicle G | SCALE --Textured exoskeleton provides extra strength and prevents slipping PAD BOX --Set of 4 --Strongest scale pad box 300-171005 $26900 SET OF 4 around, holds up to 3000 lb. --Two high-strength latches $24999 EA B | SCALE RAMP secure your scale pads Two handles make carrying --Low profile ramp for 21⁄2”/64 mm scale pads your scale pad box a snap --15” x 15” / 380 x 380 mm lightweight aluminum --Aluminum/steel corners design complements all scale systems and edges protect during 300-7060 transport 910-82100 $30500 SET OF 4 H | CHASSIS HEIGHT GAUGE C | SCALE RAMPS --Allows you to preset the desired height and slide gauge under car --High tech foam ramps weigh --Adjust height until frame rail touches end of tape less than 3 lb. and can take a beating 475-78320 SHORT - 24” $9999 EA --Easy to store 475-78325 LONG - 36\" 10999 EA --12” wide, 14” long and 21⁄2” tall --Set of 4 $16055 SET 236-3000 J | SET-UP BLOCKS D | FRAME HEIGHT “WEDGIE” --Adjustable in 1/4\" increments --Use 6” blocks to square the rearend and 4” blocks to race, --Simple one handed operation on raised rail cars subtract 1” on this set-up on the LH side --Measures 31⁄2” - 71⁄2” --Fits in your pocket STANDARD 300-8150 $2499 EA 910-82750 910-82755 1.75\" - 4\" $6999 PR 3\" - 6\" 7999 PR Test, Don’t Guess! SET YOUR CHASSIS ANYWHERE K | HYDRAULIC WHEEL E | FRAME HEIGHT TOOLS LOAD CHECKER --Quick and accurate way to measure frame height --Three-piece kit covers from 3” to 7” in 1⁄8” increments --Features heat-treated aircraft aluminum --Also available individually pivoting head, bull’s-eye level and adjustable --Sturdy, steel construction Test, Don’t Guess! stand with quick release pin for height adjustment 300-0010 0-1000 LB. (20 LB. INCREMENTS) $18999 EA 300-8100 KIT $2999 KIT 18999 EA 3” - 43⁄8” 300-0015 0-1500 LB. (20 LB. INCREMENTS) 300-8101 41⁄4” - 55⁄8” 1799 EA $2999 EA 300-8102 55⁄8” - 7” 1799 EA REPLACEMENT LOAD CHECKER GAUGES 300-8103 1499 EA 910-650-LBS SPECIFY 300 - 1500 LB. GAUGE AS NEEDED 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 329

TOOLS || Spring Raters Test, Don’t Guess! Test, Don’t Guess! A | ANGLE FINDER E | HYDRAULIC COIL SPRING RATER --Used for setting pinion angle and critical chassis components (panhard bar, etc.) --Portable design allows you --Magnetic base to check your springs anywhere --Adjustable plate for any height spring 910-89409 $999 EA --Large, easy to read 4” gauge --Original patented design for guaranteed accurate results --Max length spring 14” B | DIGITAL 300-1000 0-1000 LB. (10 LB. INCREMENTS) UP TO 350# $29999 EA ANGLE GAUGE 29999 EA 300-2000 0-2000 LB. (20 LB. INCREMENTS) UP TO 750# 29999 EA --New digital angle finder 300-3000 0-3000 LB. (50 LB. INCREMENTS) UP TO 1250# 29999 EA reads from 0° to 90° 300-5000 0-5000 LB. (50 LB. INCREMENTS) OVER 1250# in .05° increments $4499 EA --Large backlit LCD display rotates characters 180° REPLACEMENT SPRING RATER GAUGES --Measures 2.25” square, has magnetic base, 910-659-LBS SPECIFY 1000-5000 LB. GAUGE AS NEEDED and uses a 9V battery 910-89429 $6900 EA F |DIGITAL COIL SPRING TESTER --Digital coil spring tester will read from 0-2000 lb. or 0-5000 lb. --Digital pressure gauge reads in 1 lb.increments and the digital travel scale reads to .001 lb. --Will test up to 6” diameter springs 18” long C | BIRDCAGE 300-7100 5000 LB. $99500 EA INDEXING TOOL 300-100061 2000 LB. 94500 EA --Birdcage indexing tool greatly G | COIL-OVER simplifies tedious process SPRING RATER --Slip over birdcage bolts and attach angle finder --Gives an exact angle of the birdcage --Rates standard coil springs 2.5” to 6” --An invaluable tool for both racers and chassis builders diameter coil-over setups --Choose 1⁄2\", 5⁄8\" or 3⁄4\" based on birdcage bolt size --Compress coil-over assemblies for easy adjustments --Angle finder sold separately --31” eye to eye height --105⁄8” jack travel with 12” digital travel indicator 800-45012 1⁄2\" INDEXING TOOL $4499 EA --Rate bump stops and determine 5⁄8\" INDEXING TOOL coil bind and rod pressures 800-45058 3⁄4\" INDEXING TOOL 4499 EA --Easy to use handles allow adjustments without tools 800-45034 4499 EA --5000 lb. capacity 300-110060 $182000 EA D | LOAD STICK H | PULL BAR RATING ADAPTER --Bolts in place of shock on --Use with Intercomp's coil-over rater 300-110060 a non-coil-over suspension $49499 EA --Accuracy of +/- 0.25% of applied force up to 5,000 lb. --Makes spring changes easy and accurate 59999 EA --Rates pull bars and compression-type traction links --Allows you to pull the suspension down to dynamic --36\" center-to-center length capacity, attitude to find your compresses loads and check for includes mounts for 3⁄4\" rod ends suspension binds --Maximum travel of 6\" 910-4147 LOAD STICK - 7\" 910-41471 RACHETING LOAD STICK - 7\" 300-110064 ADAPTER ONLY $64500 EA 330 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Alignment Test, Don’t Guess! E | TIE ROD/ FOUR-LINK GAUGE BAR A | BUMPSTEER GAUGE --A simple tool for setting the length of tie rods and radius rods --Fits 1⁄2”, 5⁄8” and 3⁄4” rod ends. 32” long --Precision-ground steel plate, bottle jack with 300-8005 $3499 EA adjustable height and location --Adjustable-height gauges --Slotted mounting holes on plate allow use of 41⁄2”-5”bolt circles without removing rotors --Must be modified for four-lug use --An exclusive design, our bumpsteer gauge features two gauges for fast, accurate readings of degree of toe-in change that occurs as the front suspension moves up and down 910-82700 $16999 EA F | RADIUS $3999 PR ROD TOOLS --For 1⁄2\" rod ends 940-37119 G | TRU-STAGGER B | PRECISION BUMP TIRE MEASURING DOLLY STEER GAUGE WITH BILLET PLATE --Weighs less than 31⁄2 lb. --Features four ball bearing wheels that allow you to turn the tire --Most accurate, easiest and quickest way to measure your critical bump steer 910-82070 TRU-STAGGER $9799 EA --New precision plate, 3/8\" thick T6 Billet aluminum for the ultimate in accuracy --Anodized and laser engraved --New compact frame --More rigid billet and tube design for the best accuracy --Bright dip anodized --Extended height design - check bump steer at ride height or on stands --Includes new 3⁄8\" thick billet wheel plate with mounting holes for most 5 bolt patterns (41⁄2\" - 5\") and most wide 5 plus 4, 5 & 8 bolt drive flanges, adjustable stand and precision dial indicator --Center hole is 31⁄4\" 1 475-79005 PRECISION BUMP STEER GAUGE WITH BILLET PLATE $28999 EA 2 475-79121 SNAP CAP HUB MOUNTING STAND-OFFS 4499 EA H | TIRE C | STAGGER TAPE $599 EA MARKING PEN --Features thumb locking feature 475-50882 LONGACRE - TIRE MARKING PEN --10’ long, 1⁄4” wide steel tape 910-82325 SPEEDWAY - TIRE MARKING PEN --Use to measure tire circumference 910-82015 $699 EA 499 EA J | TIRE $499 EA D | HEAVY DUTY $699 EA MARKING STICK 25-FOOT TAPE MEASURE 475-50880 TIRE MARKING STICK --Huge, easy-to-read 1” wide blade 800.979.0122 7a.m. to 10 p.m. 910-83330 SpeedwayMotors.com 331

TOOLS || Alignment Test, Don’t Guess! A | MAGNETIC CASTER E | BUBBLE CAMBER GAUGE CASTER CAMBER GAUGE WITH MAGNETIC ADAPTER --High-quality billet aluminum --Measures +8° to -4° caster range, --Industry's highest accuracy bubble gauge --+6° to -6° camber range --CNC-machined, billet, aluminum housing --Gauge machined at both ends for easy and with easy-to-read bubble display accurate caster settings --Measures -6 to +6 degrees of camber and -8 to +8 degrees --Anodized and laser-etched for easy readings of caster with 0.25 degree accuracy --Equipped with magnetic adapter $11999 EA 300-102010 MAGNETIC ADAPTER $15900 EA 910-82605 MAGNETIC CASTER CAMBER GAUGE 4999 EA 300-102042 WIDE-5 ADAPTER 16900 EA 475-78405 WIDE 5 ADAPTER B | DIGITAL CASTER CAMBER GAUGE F | TOE PLATE $6499 SET $9900 SET --Reads to 1/10° and as high as needed --Rest one of these plates against the tire on each side $6999 EA --Comes with a Super Magnetic adapter and a padded silver carrying case and use a tape measure --AccuLevelTM digital readout can be removed and used separately as a --Comes with two tape measures 475-7950 digital angle finder for suspension, spoiler angles and many other things 475-78290 $24999 EA C | DIGITAL CASTER G | TOE PLATE CAMBER GAUGE --Quickly and accurately measure toe --Will read up to 20° of caster and camber --High-strength, lightweight, aluminum plates --Reads to the .1°, allowing you to be --Includes two measuring tapes --10 times more accurate on your readings --Dimensions: 27.5\"\" x 11\"\" (698 x 279mm) --Includes a storage case and magnetic adapter --Set of 2 --Includes standard 9V battery 300-102009 300-7200 DIGITAL CASTER CAMBER GAUGE 300-1255 WIDE 5 ADAPTER $36900 EA 6499 EA GDTueeossnts’,!t H | TOE GAUGE --High-tech aluminum gauge for measuring toe --Eliminates need for tape measure --Meaures in 1⁄16” increments --671⁄2” max width 300-8000 D | ECONOMY J | TIRE SCRIBE CASTER/CAMBER GAUGE --Use to make line on the tire for toe-in setting --Spring-loaded --Will read +/-7° and is accurate to 1⁄8° 910-82610 --Adjustable magnets attach to your hub 475-7961 $7999 EA --Aluminum construction $4499 EA 332 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Pullers and Drivers F | UNIVERSAL $699 EA A | WHEEL BEARING PACKER $2999 SET ALIGNMENT SYSTEMS --Quickly packs bearings with new grease while forcing out old grease --New wheel alignment system with 910-89635 lighter weights that stay on the wheel rim easier --Fixed gauge attachment for easier caster, camber and toe G | BEARING RACE adjustments while on the wheel AND SEAL DRIVER --QuickTrick case --Dual side set up frame for caster, camber and toe --Quickly and easily installs wheel bearing --Digital gauge races and seals without destruction --New affixed digital gauge brackets on each frame to race or axle housing --Two tape measures --Set includes six discs to fit common --6 attachment pins w/Red protector caps bearing sizes: 1.565”, 1.75”, 1.965”, --Allen wrench 2.325”, 2.47” and 2.555” --Instructions 910-89625 910-416405 FITS 13-18\" WHEELS $28999 EA 910-416412 FITS 17-22\" WHEELS 29999 EA H | PITMAN ARM PULLER B | STEERING WHEEL HOLDER AND ALIGNMENT TOOL --Opening size 15⁄16” x 3⁄8” drive square port in center screw allows for use --Makes measurement more accurate with 3⁄8” drive ratchet --Pressing the locking switch can adjust the height with a loaded spring to fit a 910-89630 $1499 EA wide variety of cars or trucks --Smooth hooks prevent damage to J | SEAL PULLER the steering wheel or seat cover --For removal of grease and oil seals $699 EA 910-416474 $5499 EA --Two tip sizes accommodate many applications 910-89620 K | 891 STEERING C | BILLET CASTER AND WHEEL PULLER KIT CAMBER GAUGE WITH QUICK SET ADAPTER --Easy to use --Includes all bolts/hardware necessary --Reads Camber from +9 deg. to -9 deg., 410-5891 STEERING WHEEL PULLER KIT $799 EA accurate to better than 1/4 deg. --Caster reads from +12 deg. to -4 deg. 475-78274 $25999 EA L | GM LOCK PLATE TOOL D | POWER STEERING PUMP AND ALTERNATOR --Compresses the lock plate so PULLEY PULLER snap ring can be removed --Removes power steering and alternator 910-32610 $999 EA pulleys on selected applications of GM, Ford and Chrysler with hub TIE ROD sizes of 11⁄8”, 11⁄4”, 15⁄16” or 13⁄8” 910-89637 $1799 EA BALL JOINT M | TIE ROD AND BALL JOINT SEPARATOR E | PLUMB BOB KIT --Square rear end --Break loose tie rods and ball joints --Lots of other uses --Opening size is 21⁄32” for tie rod and 15⁄16” for ball joint 910-89610 TIE ROD $999 EA 475-50820 $2999 EA 910-89600 BALL JOINT 999 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 333

TOOLS || Brake H | 37° TUBE FLARING TOOL A | LEVER TYPE TUBE BENDER --Makes clean, accurate flare every time --Simple and easy to use --10” handle gives plenty of leverage to make smooth, 910-89520 37° FLARING TOOL $4099 EA professional 5⁄8” radius bends in 3⁄16” stainless or mild steel brake 910-89528 37° FLARING TOOL - MADE IN U.S.A. 9799 EA line tubing --The graduated scale of the hard $8999 EA J | BRAKE SPOON steel die permits accurate, repeatable bends time after time --Adjusts star-adjuster 910-89527 and screw-adjuster type brakes quickly B | DOUBLE FLARING and easily $399 EA BRAKE LINE TOOL 910-83306 $499 EA --Produces high quality double flares $3999 EA K | BRAKE SPRING --For use on 3/16\" steel, nickel, COMPRESSOR and copper tube --Lightweight and easy to use --For removal and --Use on car or bench vise replacement of backing 728-51535 plate springs, cups and pins 910-83302 C | MINI TUBING BENDER --Bends 1⁄8\", 3⁄16\" and 1⁄4\" tubing up to 90 degrees --Use with brass, copper, steel or aluminum --Compact for limited accessibility applications 728-51503 $1499 EA D | BRAKE L | TUBING CUTTER SPRING TOOL --Great for brake line or aluminum fuel line --Easily removes and installs brake springs 910-89526 $999 EA 910-83304 $499 EA M | FUEL LINE TUBING BENDER E | 37° TUBE $1499 EA FLARING TOOL --Will bend 1⁄4”, 5⁄16”, 3⁄8” tubing up to 90 degrees --The flaring tool you need to make the 37° flare so essential to 910-83300 working with AN fittings --Standard brake and fuel lines are flared at 45° - $9799 EA N | FITTING FIXER which is not compatible with AN hardware --This tool makes a clean, accurate flare every time --Repairs the sealing surface on 37° fittings --Works on tubing from 3⁄16” to 5⁄8” --Utilizes a diamond-dust bonded lapping material 910-89528 37° FLARING TOOL - MADE IN U.S.A --Portable, easy to carry, easy to use --Works with a drill (all sizes) or tap handle (sizes -3 to -6) F | HEAVY DUTY RATCHETING --Includes a custom storage case 37° FLARING TOOL 469-3000-SPECIFY INDIVIDUAL FITTINGS $3822 UP --It has a ratcheting feed screw 17150 KIT that has a hardened flaring 469-3468 COMPLETE SET -3 TO -8 FLARE FIXING KIT cone supported by needle bearings --Will put a 37° flare in 3⁄16”, 1⁄4”, $14499 EA 5⁄16”, 3⁄8”, 1⁄2”, 5⁄8” and 3⁄4” tubing --Works great flaring 3⁄16” stainless steel brake line 910-89524 G | 45° DEGREE DOUBLE P | SURE SEAT FLARING TOOL LAPPING TOOL --Allows you to lap-in flared tubing to eliminate leaks in fuel and brake line joints --This tool makes 45° flares only 469-3700 37° TOOL $5880 EA --For 3⁄16”, 1⁄4” 5⁄16”, 3⁄8”, 1⁄2” 45° TOOL 469-4500 DELUXE KIT WITH 37° AND 45° TOOL 5880 EA 910-89525 $3499 EA 469-5100 14700 EA 334 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Engine Storage S/B FORD S/B CHEVY F | ENGINE LIFT HANDLES --Allows for a smoother lifting process for those times when a cherry A | ENGINE STORAGE STANDS picker isn't practical --Lightweight, high-strength polymer --Allows installation of drives, pulleys and clutches --41⁄4\" long handle --S/B Chevy stand is powder coated red --Set of 4 --S/B Ford stand is painted blue --Includs 3⁄8\"-16 hardware 916-81200 S/B CHEVY 910-81220 ENGINE LIFT HANDLES $3699 EA 910-81199 S/B FORD $3499 EA 3999 EA S/B FORD S/B CHEVY G | SPRINT CAR B | ENGINE ENGINE STAND STORAGE STANDS --1” diameter plated tube --Bolts to the back of block and off --Light, compact and priced so low anyone can afford them of the front motor plate --You can even leave the tranny attached --Add the wheel kit to make it mobile 910-89228 STAND $6499 EA --2-piece design $4499 EA 546-185 MOTOR PLATE 5999 EA 910-81101 S/B CHEVY 4499 EA 910-81137 LS1 CHEVY 3999 EA 910-81102 S/B FORD 4499 SET 910-81139 SET OF FOUR CASTERS 8999 EA 916-02000 SBC ROLLING ENGINE STAND 8999 EA 910-81149 LS ROLLING ENGINE STAND 8999 EA 916-02001 SBF ROLLING ENGINE STAND H | SPRINT CAR C | PORTABLE ENGINE STANDS ENGINE STAND --360° engine rotation --This engine stand is perfect to store your --Assembles and disassembles easily engine in the off season or for your spare --No welding required --2” casters for easy transport --Heavy duty steel wheels --Fits either standard or lightweight blocks 1 910-81003 1000 LB. - 3 LEG $8999 EA 2 910-81002 1500 LB. - 4 LEG 9799 EA 940-81106 $24999 EA D | ENGINE STAND AXLE ADAPTER --Axle can be rotated 360° --Easy to mount and adjust --Inspect or service rear gears, wheel bearings --and brakes without being on the ground J | ENGINE STAND 910-98084 $5499 EA DRIP TRAY E | CHEVY V8 --Helps keep your shop floor clean ROLLING ENGINE CRADLE during engine disassembly --Made from a durable black plastic and --Fits Small and Big block Chevy motors designed to fit most three and four leg mounting on the rear lower bellhousing engine stands dowels/bolts and side engine mount locations --Big enough to catch debris from a big block, small enough to stay out of your way 458-7200 $5499 EA 916-81209 $3499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 335

TOOLS || Engine Storage DELUXE STANDARD G | ENGINE SEAL KIT --Kit of aluminum plates designed to block off all openings in --S/B Chevy long block --Great for engine storage A | ENGINE 910-81607 STANDARD $1399 KIT LIFT PLATES $699 KIT --Deluxe model is designed to allow H | ECONOMY 599 KIT complete adjustability without the need BLOCK-OFF KIT for clumsy hooks --Simply slide the chain through to the desired --This economy plastic kit length and slide the link into the slot covers the exhaust ports and distributor hole --There is also a heart-shaped hole to allow use of a hook --Standard model features four holes that allow for 458-73001 S/B CHEVY 458-73002 B/B CHEVY compensation for engine tilt --Both models incorporate the standard Holley 2 and 4 bbl. J | DELUXE and Rochester bolt patterns ENGINE LEVELER 910-89431 DELUXE MODEL $1999 EA -- 3⁄4”-ton engine leveler 910-89430 STANDARD MODEL 1299 EA includes a crank handle to allow faster leveling and a chain link for the hook B | LS ENGINE LIFT PLATE 910-89445 $6499 EA --Chrome plated lift plate 940-11645 ENGINE LIFT SLING 2899 EA allows you to safely and K | ENGINE CRATES precisely install or remove your LSx by its valley --Crates fit most S/B Chevy --Fits all Gen III and IV GM and Ford engines motors '97 and newer --40\" Long x 27\" Wide x 35\" High 916-10100 LIFT PLATE $5571 EA --Manufactured from tough LLDPE Polyethylene --Crates fit both 360 and 410 Ford engines C | ENGINE LEVELER 940-5116 410 CRATE (SHOWN) $26999 EA --Fully adjustable threaded 940-5108 360 CRATE 23999 EA rod allows you to tilt engine as needed --Includes chains with three mounting holes per end L | ENGINE BAG --Cover for spare engine 910-89440 $3999 EA --Made from a water repellent D | ENGINE heavy duty Denier nylon LIFT CHAIN --Has sturdy drawstring at bottom to --24” of heavy duty 1000 lb. secure cover to stand load chain 564-EB1000 PURPLE $6999 EA 910-89435 $799 EA 564-11000 BLACK 6999 EA E | ENGINE CLEANING F | ENGINE LEAK M | DIGITAL ENGINE BRUSH KIT DOWN TESTER LEAK DOWN TESTER --Kit includes 12 brushes in sizes from --Checks ring seals, valves, --Checks ring seals, valves, -- 1⁄4” diameter to 5” diameter even head gaskets even head gaskets 475-73010 545-61820 $3499 KIT $11999 EA 475-73014 $21999 EA 336 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Engine Assembly J | DIAL INDICATOR STAND E | DIAL A | CAMSHAFT INDICATOR DIAL INDICATOR --Spans cylinder bores up to 47⁄16” and makes it easy to check piston --23⁄8” diameter face, --This style of dial indicator fits in either dome and deck height measures in .001” .842” GM or .875” Ford lifter bores --Can also be used to check flatness increments --Reads in .001” increments runout, warping, etc. --1” of travel --Dial indicator not included --Probe has 1” stroke --Includes bracket on the back 545-62050 $2999 EA 910-82721 $1999 EA 586-66838 $6999 EA K | TOP DEAD F | CAM DIAL CENTER INDICATOR INDICATOR STAND --Positive stop to locate top dead center --A must for cam checking with heads on --Simply screws into either a 7⁄16” or 1⁄2” head --For 14mm thread bolt hole and allows you to check cam specs --1” travel dial indicator reads in .001” 550-3410 $599 EA increments and mounts to an adjustable stand 586-66830 $6999 EA B | BUDGET DEGREE WHEEL KIT --Includes 9° wheel, pointer, piston stop, dial indicator, stand, two light valve springs and instructions, all in a foam-lined carrying case 910-81132 $11999 KIT L | SOFT JAW PADS G | ENGINE ROTATOR TOOL C | DEGREE WHEEL CRANK SOCKET --Fastens to vise jaws with 3 strong magnets --Hardened steel tool fits into the harmonic --Non-Marring material prevents balancer on S/B Chevys --Broached keyway allows 1⁄2” socket clamp marks, scratching, and other --Provides a positive way of rotating the to slide over crank snout and key damage to finished surfaces engine when setting valves, --Giant knurled jam nut positions --Available in 4\" or 6\" sizes locating TDC or degreeing cam degree wheel --Sold as a pair --Tool has a 11⁄16” hex head --For S/B or B/B Chevy 728-22019 4\" $1499 PR 728-22020 6\" 1499 PR 910-81020 $2299 EA --S/B socket fits V8, 90° V6 Chevy and Super Duty Pontiac 4 cylinder --Use with 11” degree wheel (545-62190) 545-61755 S/B CHEVY $2499 EA 545-61756 B/B CHEVY 6499 EA M | HEAVY DUTY H | CONNECTING D | HEAVY DUTY CONNECTING ROD VISE PISTON INSTALLER ROD SEPARATOR --Can be mounted permanently --This nylon tool allows easy --Fits in your bench vise or in your bench vise piston installation without --Works with new or reconditioned rods --Holds rod without damaging damaging parts --It is almost impossible to get the rod cap --Weighs in at almost 2 lb. and is shot filled off a rod without a tool like this 586-66769 SPEEDWAY $9799 EA 728-51363 TITAN 8999 EA 586-66773 $12499 EA 586-67571 $5499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 337

TOOLS || Engine Assembly A | ROD G | DIGITAL ENGINE BALANCING STAND BALANCER --Rod weight fixture for determining --Allows you to quickly and bob weights and matching accurately weigh pistons, rod end weights rods, valves and other --With bearing-mounted arms internal engine components --All aluminum construction --2000 gm./70oz. capacity, (Scale not included) 1gm./1oz. graduation, zero adjustment 910-81605 $21499 EA --9V battery operation, $13999 EA AC adapter included $7999 EA 910-81601 B | ROD BOLT $6499 EA H | ECONOMY LENGTH CHECKER ENGINE SCALE --The correct way to install --Back light display rod bolts is to measure --Auto off: 60 seconds their stretch with this --4\" x 4\" platform easy-to-use tool --Two clear containment bowls 910-81606 --Tare range: Tare full capacity --Calibration: Auto calibration --Power: 2 AAA batteries (included) --Weighing units: G. OZ, OZT, DWT, CT, GN 910-81602 C | CUBIC INCH TESTER J | HARMONIC BALANCER PULLER AND INSTALLER --Use to determine correct displacement when restrictions apply --Accuracy to .5% --Installs and removes engine balancer --Includes glass tube, thermometer, plug adapter, instructions and --Features a needle bearing center and accessories in a hardwood box adapter to fit all U.S. engines --Up to 672 ci 550-3200 $109999 EA 910-81600 $7499 EA D | DUAL GAUGE $6999 EA K | CYLINDER LEAK LEAKDOWN TESTER 2499 EA DOWN TESTER --Detects ring seat failure, bent valves, --Top of the line components are used in this precision instrument cracked head, and leaking gaskets --Calibrated for high accuracy and repeatability --Works best with 100-plus psi air source --Houses in a stand-up, black powder coated steel case to make taking --Sets barrel valve on fuel injection readings easier and to protect the components themselves without engine running --Comes with 14mm adapter long, 14mm and 18mm adapters short, 913-81121 DUAL GAUGE LEAKDOWN TESTER tapered plug adapter and whip lines 913-81123 BARREL VALVE HOSE AN 6 545-89603 $46999 EA E | SINGLE GAUGE TESTER $5499 EA L | DIGITAL 2499 EA COMBINATION --Works with 80 psi of air LEAK DOWN/ pressure through 1⁄4” air line $9499 EA COMPRESSION TESTER 913-81101 SINGLE GAUGE LEAKDOWN TESTER 913-81123 BARREL VALVE HOSE AN 6 --The most accurate leak down and compression tester, repeatable accuracy for engine cylinder and fuel injector/barrel valve F | 32” LONG leak down percentages STRAIGHT EDGE --Reads engine compression pressures to 400 psi --Locking regulator allows for incoming air pressure adjustment --Used to check for straightness on blocks and heads --32” long and accurate to .001” 913-81122 $84500 EA 577-620 SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE 338 SpeedwayMotors.com

|| Timing F | SELF-POWERED TIMING LIGHT A | SELF-POWERED TIMING LIGHT --Runs on six AAA batteries instead of 12V power, which means you can check your timing quickly and easily --Works well with all ignition systems --Powered by 2 D cell batteries 547-8991 $24795 EA 1 610-1754 $5999 EA G | DIGITAL ADVANCE B | TIMING LIGHT TIMING LIGHT --Built using solid state circuitry and uses a unique SCR (silicon --Super bright xenon flash, controlled rectifier) that provides accurate and stable timing signals and a high Vis LED display from 0 to 8000 rpm --Designed for precise tuning --A 6 ft. lead with a heavy duty inductive metal pickup can and diagnostic work be attached to the spark plug wire in any direction --Pushbutton control to adjust advance --Can be used on all engines with standard or capacitive discharge and switch between 4 and 2 cycle engines ignition systems --Tough ABS shell --Works with 12 volt systems 2 547-8990 $18695 EA 910-80587 $5299 EA C | ORANGE $799 FT H | TRU SHOT $4999 EA THERMAL SPRAYER SLEEVE 799 FT 799 FT --One quart black powder coated --Silicone coated steel can with adjustable nozzles fiberglass sleeve --Work with 80-100 psi --500°F continuous, 2000°F --Great for use with Mudd Off, Mud-X, short duration Brakleen, penetrating oils --Great for wires, cables and lines or solvent-based products --Not for all water based products 704-00-075 3⁄4” I.D. 910-1002 BLACK 704-00-100 1” I.D. 704-00-200 2” I.D. J | HI-TEMP SILICONE COATING D | ALUMINIZED HEAT SHIELD SPRAY FOR EXHAUST WRAP --Two sheets of 99.5% pure grade industrial aluminum --Protection from abrasions, oil & grime laminated to 3/8” fiber tech padding to achieve highest --Heat protection up to 1500°F reflection of radiant heat and sound deadening --For use on exhaust wraps, engine blocks, pipes, --Sold in 4’ x 6’ sheets manifolds and more 910-80250 SINGLE-SIDED ALUMINUM $2999 EA 356-010301 BLACK $1099 EA 910-80249 TWO-SIDED ALUMINUM 3499 EA 356-010302 SILVER 1099 EA 910-58010 ADHESIVE SPRAY 999 EA 910-58011 HEAT SHIELD FOIL TAPE 2” X 30’ 699 EA K | HEAT E | ALUMINIZED REFLECTIVE TAPE LINE SLEEVING --For firewalls, bulkheads, engine covers, --Capable of withstanding floors, seat bottoms and more 500°F direct / 2000°F radiant heat --Trim to desired length 356-10393 GOLD - 24\" X 24\" - TEMPERATURES UP TO 850° $4999 EA 1 356-10418 HEAT SHEATH SEWN - ALUMINIZED, 1⁄2\" X 36\" $1299 EA 356-010460 1099 EA 356-10419 HEAT SHEATH SEWN - ALUMINIZED, 1\" X 36\" 1699 EA 356-010460 SILVER - 12\" X 12\" - TEMPERATURES UP TO 400° 1099 EA 356-10403 HEAT SHEATH SEWN - ALUMINIZED, 3⁄4\" X 36\" 1199 EA SILVER - 12\" X 24\" - TEMPERATURES UP TO 400° 2 356-10405 HEAT SHROUD VELCRO - ALUMINIZED, 1\" X 36\" 2799 EA 356-10487 HEAT SHROUD VELCRO - ALUMINIZED, 1\" TO 2.5\" X 36\" 3499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 339

TOOLS || Valve Train A | VALVE LASH G | UNIVERSAL P | CAM WRENCH SETS VALVE LASH BEARING DRIVER ADJUSTING TOOL --Accurately adjust --Remove and replace your S/B Chevy your 9⁄16” or 5⁄8” --Adjusts ALL shaft and stud mount rocker and 90° V6 cam bearings without rocker nuts systems on the market today damage to the bearings 910-81147 $6999 EA 910-81123 7⁄16” WRENCH, 1⁄8” T-WRENCH $2499 SET H | VALVE SPRING 910-81124 1⁄2” WRENCH, 1⁄8” 2499 SET COMPRESSOR 913-81102 $2599 EA 910-81127 AND 3⁄16” T-WRENCHES 2499 SET 910-81128 9⁄16” WRENCH, 3⁄16” 2499 SET --Screws on to 3⁄8” AND 7⁄32” T-WRENCHES and 7⁄16” rocker studs 5⁄8” WRENCH, 3⁄16” AND 7⁄32” T-WRENCHES --Locks into the down position so you can work with both hands B | VALVE LASH 910-81130 $5499 KIT TORQUE WRENCH J | S/B Q | UNIVERSAL CHEVY CAM BEARING DRIVER --T-handle valve VALVE wrench with a built SPRING --Expanding plugs can install most in torque wrench COMPRESSOR any bushing from 11⁄4” to 2.69” I.D. and 910-81122 comes in a carrying case --Works with Jesel or $17499 EA T&D-style shaft-mount rockers 586-66820 $18999 EA --Removes springs with heads on C | BEAM 910-81135 COMPRESSOR $19899 EA TYPE 910-81144 SPEED HANDLE 4999 EA TORQUE WRENCHES K | JESEL R | CAM AND AND T&D LIFTER ORGANIZER TRAY --Works with right and VALVE left hand thread fasteners SPRING TOOL --This storage box keeps your lifters in order --Minimum fatigue over the lifetime and the snap-on lid keeps everything clean of the tool, insuring better accuracy --For use with --High-impact plastic, 231⁄2” x 21⁄8” deep standard Jesel rockers --Allows you to remove 251-4390 STANDARD CAM AND LIFTER $1999 EA LH or RH valve springs 728-23140 1⁄4\" - 0-80 IN./LBS. $1999 EA 910-81062 251-4391 ROLLER CAMSHAFT AND 4999 EA 3⁄8\" - 0-800 IN./LBS. ROLLER LIFTERS 728-23141 1⁄2\" - 0-150 FT./LBS. 2499 EA 728-23142 2899 EA $13999 EA D | LED POCKET L | DUAL S | VALVE PEN FLASHLIGHT FEELER TRAIN WITH BELT HOLSTER CLIP GAUGE HOLDER ORGANIZER TRAY --Aluminum feeler gauge holder --231⁄4” x 123⁄8” x 15⁄8” --Holds two sets of feeler 251-4394 gauges on the same handle --Super-bright 1 watt high-flux L.E.D. 910-81133 SHORT $3499 EA 910-81143 LONG 3999 EA 728-36006 $1999 EA $3799 EA E | VALVE M | CHEVY T | STUD REMOVER LASH CAMSHAFT AND TAP ALIGNMENT FEELER INSTALL TOOL GAUGES --Allows removal of stock press-in --This tool bolts on the end of the cam studs and aligns the tap (7⁄16” - 14) --Features 3” blades and gives you the control to do the job right to simplify the installation of with a .002” step for setting valve lash --Works great for taking the cam out too screw-in rocker studs 910-81136 $799 EA 586-66897 $2699 EA 910-81131 $1799 KIT F | LS SPRING N | HEAVY U | CLUB REMOVAL TOOL DUTY NUT SPLITTER HAMMER --Mounts directly to factory --Removes rusted, stripped, and stubborn --Hot rolled steel core stands on LS1-LS6 using nuts and has a self-centering wobble tip --Strike zone for increased strike accuracy specifically engineered adaptor --Mounts directly to LS7 head 910-81146 $21999 EA 910-89432 $1399 EA 910-9084 4 LBS. $3999 EA 340 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Valve Train M | PRECISION F | VALVE SPRING A | HYDRAULIC STAINLESS PRESSURE TESTER VALVE SPRING STEEL CALIPERS CHECKER --Test tension up to 300 lb. --Stainless steel calipers come with a quickly and accurately --Made from billet padded storage box --Mounts directly on rocker arm aluminum with --Allows measurements of .001” --Calibrated to within 3% steel inserts for --For use with many years of use 910-89425 DIAL - 6” $2999 EA aluminum rockers only --Special roller tip end $22899 EA and steel guides 545-62390 $9499 EA will work with most rocker arms 910-81134 N | ENGINE G | DIGITAL B | VALVE COMPRESSION VALVE SPRING TESTER TESTER SPRING TESTER --Black anodized aluminum --Check for bent or leaking valves, --Ideal for checking valve spring --Most convenient valve spring bad ring seal, even leaking head gaskets on an assembled motor tester on the market --Easily detects broken or --Set spring height once and test 475-73010 $11999 EA fatigued springs as many springs as you --0-500 lb. in 5 lb. increments want, with little effort --Handles up to 600 lb. springs 910-81060 $57900 EA H | VALVE 916-81150 $19999 EA SPRING GAUGE P | COMPRESSION C | BILLET TEST KIT GAUGE --Measures tension of REMOTE valve springs STARTER --Standard gauge --Use in a vise, or under the BUTTON 910-89448 quill of a drill press --0-600 psi --Billet Aluminum --Crank your motor over from the 913-81103 $5499 EA engine compartment 475-45795 REMOTE START BUTTON $6999 EA J | PUSHROD $3999 EA LENGTH Q | COMPRESSION CHECKER TEST KIT GAUGE --For small block Chevy --Digital gauge --Just slip it over the rocker arm stud 910-89449 to instantly tell how much longer (or shorter) the pushrod needs to be 505-42137 3⁄8” $1699 EA D | PUSHROD LENGTH TOOL 505-42132 7⁄16” 1699 EA -- 5⁄16” diameter and fit several engines $8999 EA --Sold per pair K | 1⁄4\" TO 7⁄16\" 287-99720 6.125”-7.5” 289-302 FORD, $2999 PR STUD REMOVER KIT S/B CHEVY WITH HYD. ROLLER 287-99721 7.5”-8.7” S/B CHEVY, B/B 2999 PR CHEVY INTAKE, 351W FORD 2999 PR --Set allows you to remove 1⁄4”, 5⁄16”, 3⁄8” and 7⁄16” studs without damaging threads 287-99722 8.5”-9.8” B/B CHEVY EXHAUST, 351M-400 AND 460 FORD R | VALVE SPRING 910-89413 $3499 SET HEIGHT CHECKER --Precise measuring device for checking the installed height of valve springs 910-81125 SHORT: 1.400”-1.800” $5499 EA 910-81126 TALL: 1.600”-2.100” 5499 EA S | VALVE L | 16” PROFESSIONAL E | 7” OR 11” HEIGHT DEGREE WHEEL DEGREE WHEELS CHECK SPRINGS --The bigger the degree wheel, the more --Heavy gauge aluminum discs calibrated accurate the cam timing can be dialed in in 1° increments for determining precise --A pair of light weight --This 16” degree wheel is made of blue valve, cam and ignition timing spring help you get the installed anodized aluminum with easy to read height of valves correc white letters 450-7DW 7” DEGREE WHEEL $2999 EA 910-81129 $799 PR 586-67490 $19999 EA 545-62190 11” DEGREE WHEEL 3699 EA 545-61755 11” SBC CRANK SOCKET 2499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 341

TOOLS || Shop A | 50 FT. AIR HOSE H | 45-PIECE STUBBY AND REEL DRIVER SET --50 ft. of 3⁄8” air hose with 1⁄4” NPT --Includes an adjustable ends on a steel reel with crank wrench,ratchet with both 1⁄4” and --Mounts to the ceiling, floor, 3⁄8” drive, ratcheting screwdriver, wall or trailer screwdriver bits and both metric and SAE sockets 910-83210 $4499 EA 910-81019 $2799 SET B | LUCAS AIR 910-3800 TOOL LUBRICANT RAPIDAIR --Extends tool life --Protects under extreme operating temperatures --Disperses water --Resists blowout 484-102161 16 OZ $699 EA C | 10 PIECE T-HANDLE Complete line of components WRENCH SET and accessories online! --Includes 3⁄32”-3⁄8” wrenches and stand J | AIRLINE KITS 910-81006 $1199 SET --Operating pressure: 175psi at 70° F / 140psi at 140° F --Meets OSHA guidelines --Temperature range: -40° F to 140° F --Compatible with common compressor oils 910-7500 3⁄4\" LINE KIT $19999 KIT 910-3800 1⁄2\" LINE KIT 15999 KIT D | TERMINAL $599 EA K | SEVEN-PIECE BLOCKS 699 EA CHISEL SET 799 EA 910-64005 4 TERMINALS 910-81034 $799 SET 910-64006 8 TERMINALS $999 EA 910-64007 10 TERMINALS L | 285 PIECE ELECTRICAL E | INTERNAL / EXTERNAL REPAIR KIT SNAP RING PLIERS --Includes wire stripper/ --These pliers work for either internal or crimper, wire ties, test light, external snap rings black tape, screwdrivers, --Include two sets of straight tips, fuses, test leads and an one 45° and one 90° assortment of terminals 910-89433 910-68200 $2099 EA F | LOCK M | WIRING ACCESSORIES RING PLIERS 1 FORK SPADES SIZE GAUGE PRICE CONNECTORS 910-55666 6-32 BLUE 16-14 $1099 100/BOX 4 FULLY INSULATED MALE --Lock ring pliers 910-55672 WORKS WITH 16-14 $1299 100/BOX are essential for $999 EA 910-55674 6-32 YELLOW 12-10 1499 100/BOX transmission repairs $3799 EA GAUGE WIRE 910-89436 2 BULLET CONNECTORS STYLE GAUGE PRICE 5 FULLY INSULATED 1299 100/BOX G | MIZE WIRE 910-55670 910-55673 FEMALE WORKS WITH STRIPPERS 910-55671 MALE 16-14 $999 100/BOX FEMALE 16-14 999 100/BOX 16-14 GAUGE WIRE --This automatic wire 3 BUTT stripper is designed CONNECTORS COLOR GAUGE PRICE N | VINYL EYELET TERMINALS to holdthe wire and 910-55667 strip the insulation without 910-55668 BLUE 16-14 $1099 100/BOX 6 PART # SIZE GAUGE PRICE stretching the wire 910-55669 YELLOW 12-10 1799 100/BOX 910-55516 5⁄16” HOLE 12-10 $2099 100/BOX 910-64113 RED 22-16 1099 100/BOX 910-55538 3⁄8” HOLE 12-10 2099 100/BOX 342 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Shop G | KLEVER INNOVATIONS A | SAFETY WIRE TWISTER TOOLS BOLT DIP AND BRUSH --Precision-made for quick wiring --High purity anti-seize and lubricant --Clamp jaws over wire end, pull knurled twister --More efficient: Bolt dip features tested and proven --Positive locking spring-loaded handles 80% time savings versus brushing, saving you time and money --Less waste: 50% less material (anti-seize/lubricant) used 910-16011 $2599 EA H | EXTENDED 910-89404 6” LONG $1999 EA SPARK PLUG SOCKET 910-89405 9” LONG 2799 EA --5” long socket allows you to easily $699 EA B | STAINLESS SAFETY WIRE install and remove 5⁄8” hex spark plugs without burning your fingers on the headers --304 stainless steel safety wire --Knurled for added grip --Sold in 1 lb. rolls -- 3⁄8” drive --Handy belt clip 910-81580 --Do not reuse safety wire 910-89406 .025” (3⁄8” BOLTS AND SMALLER) $1299 EA 910-89407 .032” (3⁄8” BOLTS AND LARGER) 1299 EA J | SPARK PLUG $999 EA C | SAFETY WIRE PLIERS THREAD CHASER --Positive locking handle --14mm and 18mm --Quickly and neatly twists wire 910-81565 --A must for high vibration locations 475-22598 $2999 EA K | FLEX PICKUP TOOL D | SAFETY WIRE --24\" overall length --1 lb roll contains 362' of .032 stainless steel wire 728-11162 CLAW PICKUP TOOL $1899 EA 475-22599 728-11163 MAGNETIC PICKUP TOOL 1899 EA L | STUBBY $1999 EA ADJUSTABLE WRENCH $799 EA E | SAFETY WIRE DRILL FIXTURE --4” adjustable wrench --Opens up to over 1”, --Aluminum fixture accommodates 3⁄16”, 1⁄4”, 5⁄16” 3⁄8”, 7⁄16”, 1⁄2” and 5⁄8” diameter bolts allowing it to fit the most common fitting sizes --Includes two case hardened threaded bushings and 910-89820 two 1⁄16” cobolt steel high speed bits 910-89452 M | HEAVY DUTY $4999 EA 25-FOOT TAPE MEASURE F | WORK LIGHT KIT --Huge, easy-to-read 1” wide blade --FCS 20 watt lamp is 20-30% brighter than a 100 watt incandescent light bulb 910-83330 $699 EA --Retro fits into existing cord/handle/base combos or pull down reel cords and lamp available separately N | DISTRIBUTOR --8,000 hour life on bulbs HOLD DOWN WRENCH --Uses 15% less energy --Bang, bump and drop resistant --Contains two offset box wrenches, size 1⁄2” and 9⁄16” 910-81014 KIT $3999 EA --Use tool by itself or turn with 3⁄8” ratchet 910-81012 LIGHT CORD 2499 EA 910-81013 REPLACEMENT BULB 799 EA 910-81045 $699 PR 910-81011 HOUSING WITH BULB 1999 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 343

TOOLS || Shop A | PIT MAT G | TRACK MAT N | 7 PC. RATCHETING --Vinyl mat is 23” x 50” and COMBINATION WRENCHS olds in quarters for easy storage --SAE or Metric --Red, blue, or black -- 5⁄16”, 3⁄8”, 7⁄16”, 1⁄2”, 9⁄16”, 5⁄8” and 3⁄4” wrenches --Made of easy-to-clean, 910-78310-COLOR 23” X 50” $1999 EA --8, 10, 12, 13, 15, 16 and 18mm wrenches padded black vinyl on both sides --Black and blue measure 50” x 33.5”, red is 47” x 34” 728-17350 7 PC SAE RATCHET WRENCH $4299 SET 910-78300-COLOR $3999 EA H | THE 728-17351 7 PC METRIC WRENCH 4499 SET BONE-STER CREEPER P | 1” CARBON SCRAPER WITH BOLSTERED HANDLE --Features 3” lifetime warranty tires --Molded in strengthening B | ROLLING ribs also provide ventilation --Chrome vanadium construction $999 EA MECHANIC SEAT and built-in handles --1” wide scraper blade --43” long, 233/8”” wide and --Comfortable trilobular handle --Flip top tool chest with two sits 1” off the floor for maximum grip 910-81903 728-12462 $10999 EA ball bearing sliding drawers --Provide a total of 572 cubic inches of storage $6999 EA J | CREEPER Q | TELESCOPING MAGNETIC --Supports up to 350 lbs PICK-UP TOOL 910-8502 --Steel-frame --Padded vinyl cushioning --Powerful 3 lb. magnet --Shielded sides for targeted pickups --Telescopes from 51/2” to 217/8” --Comfortable textured cushion grip C | DECAL --Low profile 728-11763 $299 EA PACK --21⁄2\" wheels 910-81909 CREEPER ONLY $2999 EA R | 3/8\" STUD --Six pairs of decals to dress up your race EXTRACTOR car, garage wall, trailer, etc K | 180 --Decal pack may vary from photo DEGREE --Fits 1⁄4” to 1⁄2” (6-12mm) studs TUBING --Impact gun compatible 910-78002 $499 PG BENDER 728-16023 $1999 EA --Makes short, smooth radius bends up to 180 degrees --Calibration gauge to indicate angle of bend D | CAMO UTILITY BLANKET --For copper, aluminum and thin wall tubing S | AC FIN -- 3⁄8” maximum bending capacity COMB --72” X 80” --For 1⁄4”, 5⁄16”, 3⁄8” O.D. tubing --Cleans and --Shell is made of non-woven straightens condenser synthetic fibers 728-11489 $1999 EA and evaporator fins 728-22017 --6-sided head for 8, 9, 10, 12, 14 and 15 $1499 EA L | TUBE fins-per-inch applications BENDING PLIERS 728-51500 $999 EA E | ORGANIZER --Bends copper, brass TRAY and other soft thin wall tubing --For 3⁄16”, 1⁄4”, 5⁄16” and 3⁄8” O.D. tubing --Clear lid for easy identification $399 EA 728-11488 $1499 EA 728-21267 4 COMPARTMENT 728-21268 9 COMPARTMENT 799 EA M | MAGNETIC PARTS TRAY F | ADJUSTABLE --Stainless steel dish SEAT --Perfect for holding small parts, hardware and fasteners in place --Sticks to any ferrous metal surface - it even works upside down --Adjusts up and down --Rubber covered magnetic base prevents scratching --Tools can sit on 1 910-89535 41⁄4\" TRAY $399 EA bottom tray 2 910-89536 57⁄8\" TRAY --Supported by five 6\" X 14\" 499 EA casters 910-89538 1399 EA 910-89539 101⁄2\" X 111⁄2\" 1699 EA 910-83221 $4599 EA 910-89540 ASSORTED MAGENTIC PARTS TRAY SET 3499 KIT 344 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Welding A | SAVE PHACE WELDING HELMETS --180°, ear-to-ear vision with center ADF lens --Lightest helmet available --Multi-point, multi-adjustable, dual band articulating headgear EFP ELEMENTARY FACE PROTECTOR RFP SERIES – RADICAL FACE PROTECTOR --World's 2nd largest viewing area at 23 square inches --World's largest viewing area at over 40 square inches --4.25\" x 2\" Auto darkening filter --4\" x 4\" Adjustable 4/9-13 Auto darkening filter --GEN X= Non-adjustable filter 3/10 GEN Y=Adjustable --Cheater lens compatible 4/9-13 with grind mode --Includes 2 bonus flex fit protective lenses --Comes with clear and replaceable lens --Lowest Current Amp - 40VIZ12 =10A / 40VIZ14=5A EFP SERIES - GEN X CHAMELEON BLACK $11399 EA RFP SERIES - 40VIZ12 MO2 BLACK $19299 EA 1 910-310288 DOA DESIGN 11399 EA 910-311612 KANNIBAL DESIGN 17369 EA 2 910-310066 BLACK ASP DESIGN 11399 EA DEAD KING DESIGN 17369 EA 3 910-310059 6 910-311674 EFP SERIES - GEN Y GATE KEEPER DESIGN $18299 EA 7 910-311629 MO3 BLACK $21499 EA 4 910-311322 MURDA OUT DESIGN 16469 EA RFP SERIES - 40VIZ14 CAPTAIN JACK DESIGN 21499 EA MARVEL VENOM DESIGN 19529 EA WARPIG DESIGN 19349 EA 910-311230 910-311681 5 910-312145 8 910-311698 9 910-311704 B | WELDING APPAREL WELDING JACKETS SKELETAL GRAPHICS $5099 EA 1 910-312350-SIZE FLAME GRAPHICS 5099 EA 2 910-312428-SIZE WELDING GLOVES SKELETAL GRAPHICS $2199 PR 3 910-312343 FLAME GRAPHICS 2199 PR 4 910-312398 WELDING SLEEVES SKELETAL GRAPHICS $1599 PR 5 910-312534 FLAME GRAPHICS 1599 PR 6 910-312527 BEANIES SKELETAL GRAPHICS $1399 EA 7 910-312381 FLAME GRAPHICS 1399 EA 8 910-312510 C | SOLAR POWERED AUTO DARKENING WELDING HELMET D | EFP ELEMENTARY 1 728-41265 STARS & STRIPES $7499 EA SERIES HELMETS 2 728-41266 FLAME 7499 EA 3 728-41267 RED / SILVER 7499 EA --180° field of view 4 728-41282 SKULL/PISTOL 7499 EA --Low profile mask fits into tighter spaces 5 728-41283 SKULL/WRENCH 7499 EA 1 910-310738 METAL HEAD HELMET $6499 EA 6 728-41288 WORKING GIRL 7499 EA 2 910-310745 LUNAR STORM HELMET 6499 EA CLEAR PROTECTIVE LENS 399 EA 728-41264 SpeedwayMotors.com 345 800.979.0122 7a.m. to 10 p.m.

TOOLS || Shop A | AVIATION SNIPS G | FASTPIPE COMPRESSED --Compound leverage cutters AIR PIPING --Chrome molybdenum steel construction SYSTEM --Induction hardened, serrated edged blades --Rubber grips for user comfort FastPipe is today’s --Cuts cold rolled and stainless steel improved compressed air piping method with fast 728-11460 STRAIGHT CUT $1099 EA installation time. Fast pipe RIGHT CUT is energyefficient with 728-11461 LEFT CUT 1099 EA superior air quality. 728-11462 1099 EA --Aluminum alloy pipe B | DIGITAL $1799 EA --Polymer compression fittings CIRCUIT $1199 SET --Lightweight, easy install TESTER --Corrosion-free --Smooth inner surface is more efficient --Digital circuit tester --Modify/change system ANYTIME, even after install --Highly accurate and easy to use --190 PSI, Sizes: ¾\" and 1\"outside diameter 728-11436 --Pipe lengths 19 ft 8 in, and 8 ft 6 in C | IMPACT SOCKET Individual components available at speedwaymotors.com ADAPTER SET 90' MASTER KIT ¾” OR 1” --6 Piece set --12 - 81⁄2' pipes --2 - “T”s --Impact grade --20 - pipe clips --1 - ¾” threaded nipple x ¾”npt --Detent ball for secure socket retention - 1⁄4\" shank 728-12087 --7 - unions --3 - wall outlets --5 - 90° elbows --Spanner wrenches and deburring tool D | PIN-FREE LOCKING 910-28075 3⁄4\" $39999 EA IMPACT U-JOINT SET 910-28200 1\" 59999 EA --3 Piece set $2799 SET H | FOLDING -- 1⁄4\", 3⁄8\", and 1⁄2” Drive POCKET KNIFE WITH --Impact grade LOCKING WRENCH --Packaged in EVA foam 728-16151 --Blade length: 3\" --Stainless steel construction 728-11110 $1499 EA E | SAE FLARE NUT WRENCH SET --3 Piece set --15 degree offset on each flare end --Mirror polish finish provides an appealing look to the wrench --Slim body design allows for increased accessibility in tight areas 728-17388 $999 SET F | VARIOUS FUSE J | BRAKE LINE HOLDER ASSORTMENTS --Aluminum - 10\" wide, 5\" deep, 61/4\" tall 728-45229 96-PIECE MINI FUSE ASSORTMENT $999 EA --Pre-drilled mounting holes 96-PIECE BLADE FUSE ASSORTMENT --Lengths are labeled on front of display for quick reference 728-45227 24-PIECE MAXI FUSE ASSORTMENT 899 EA --Fits 9 sizes of lines storing 12 per slot - outermost 2 slots are 728-45232 88-PIECE MASTER AUTO FUSE ASSORTMENT 1899 EA for braided stainless lines AN3 or AN4 728-45230 1799 EA 916-31800 BRAKE LINE HOLDER $2499 EA 916-31801 3⁄16\" BRAKE LINE ASSORTMENT 4999 EA 346 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE

|| Shop F | OFFSET OXYGEN SENSOR A | LOCKING WRENCH AND SOCKET WALL CABINET 728-51739 OFFSET OXYGEN SENSOR WRENCH $999 EA --Weight: 25lbs 728-51704 OXYGEN SENSOR SOCKET 999 EA --Storage and security of valuable tools --Features sliding door for easier accessibility G | 10\" CUTTER $1099 EA --Pegged backing for hanging tools, keys, $5999 EA and other essential items --Cuts non-braided hose up to AN10 --Includes 30 steel hooks $1999 SET --Soft metal wiring or cables --Powder coated finish $499 SET --Not recommended for stainless --Steel construction for strength and durability steel braided hose --Assembled in carton 910-89803 728-21049 H | EXTRA-LONG ARM B | 3 PIECE STEP SAE HEX KEY SET DRILL BIT SET --Extra long design from maximum torque --High speed steel with --Ball tips for confined areas titanium finish --Patent pending textured finish for better grip --Drill multiple sizes with each bit --Easy to read laser etched sizes --28 hole sizes in 3 bits: Bit one: 13 sizes from 1/8” to 1/2” EXTRA-LONG ARM SAE HEX KEY SET - CONTAINS: $2099 SET Bit two: 6 sizes from 3/16” to 1/2” 728-12713 0.05, 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 3/16”, 1699 SET Bit three: 9 sizes from 1/4” to 3/4” 728-16503 7/32”, 1/4”, 5/16”, 3/8” KEYS C | 3-PIECE FINGER GRIP 728-12714 EXTRA-LONG ARM METRIC HEX KEY SET - CONTAINS: 1.5, SCREWDRIVER SET 2, 2.5, 3, 4, 5, 6, 8 AND 10MM KEYS --Knurled for easier grip J | TAMPER RESISTANT STAR KEY SET --Interchangeable Bits --(1) 1⁄4\" Slotted Screwdriver Bit --T-6, T-7, T-8, T-9, T-10, T-15, T-20, --(1) #2 Phillips Screwdriver Bit T-25, T-27 and T-30 --(1) 1⁄4\" Socket Adapter --Drilled tips allow use on tamper 728-11218 resistant security screws --Chrome vanadium steel construction D | 34 PC. --Keys fold compact for easy storage HOSE CLAMP --Corrosion resistant anodized ASSORTMENT aluminum holders --(8) 5⁄8” 16mm - (4) 1” 25mm 728-12710 $1299 SET --(8) 3⁄4” 19mm - (4) 11⁄16” 27mm --(6) 7⁄8” 22mm - (4) 11⁄4” 32mm 728-45348 $1199 KIT K | ELECTRONIC DIGITAL CALIPER E | 9 PIECE IMPACT SOCKET SET WITH FRACTIONAL DISPLAY --Steel construction -- 1⁄2\" drive --Black E-Coat finish -- 1⁄2\" thru 1\" size --Easy to read fractions on large LCD display --6-point --Sold as a set --Use for inside, outside, step, depth, and scribe measurements --6” range (150mm) --Set zero at any position in measuring range --Fine adjust thumbwheel --Lock knob --Stainless steel components --Protective storage case --Includes battery 728-23173 $2499 EA 728-42300 $4499 EA 800.979.0122 7a.m. to 10 p.m. SpeedwayMotors.com 347

TOOLS || Shop A | 7” POLISHER G | HVLP GRAVITY FEED SPRAY GUN --11 Amp --Adjustable dial speed control --Brass fluid and air nozzle --Lock-on switch for comfort during extended use --600cc plastic cup --Auxiliary handle mounts either side for left or right-hand use --Includes locking air regulator with gauge --Includes Velcro pad for sandpaper, and rubber pad for polishing bonnet --Air consumption 7.0-9.0 CFM --Also great for grinding tires --Air inlet 1⁄4\" --2.3mm needle and nozzle 728-22504 $8999 EA 728-19023 $3999 EA B | HEAT GUN E | 8-PIECE AIR HOSE H | FUEL & AIR CONDITIONING BLOW GUN KIT LINE DISCONNECT --12.5 Amps 120V Heat Gun --Ideal for plastic welding, shrink --Comes with a blow gun handle as --For fast and easy separation of quick well as 7 tips to go along with it disconnect style fittings tubing, and paint stripping -- 1⁄4\" NPT female fittings --For use on 3/8”, 1/2”, 5/8”, 3/4”, lines --Dual temperature setting -- (1) Blow gun --Necessary for fuel, heater, and A/C line --3 position rocker switch: off, -- (1) Rubber tip service on many late model vehicles -- (1) Air screen tip --Slidecard packaging high & low -- (1) Brass tip --Durable ABS body -- (1) Safety tip 728-51613 $699 EA --Double insulated -- (1) Adjustable tip --61/2” ft. cord -- (1) Nylon tip J | 1.4MM GRAVITY --Rated Power: Low Setting 750W, -- (1) Safety booster tip FEED HVLP SPRAY GUN High Setting 1500W --Blowing Speed: Low Setting: 10CFM --Easy clean up and reliable performance (280 L/min), High Setting: 17CFM (480 L/min) --Gravity feed ensures --Temperature: Low Setting: 572 degrees, virtually 100% material usage --High Setting: 932 degrees --Stainless steel needle and nozzle set 728-22400 $1999 EA --Spray pattern adjustment from round to full-fan shape C | SPOT SPRAY 728-19436 $1499 EA --Includes pressure regulator and cleaning kit NON-AEROSOL SPRAYER $3499 EA 728-19014 $3999 EA 728-19112 PAINT GUN CLEANING KIT 699 EA --80-150 PSI operating pressure --Refillable --Not for use with paint products --Do not use with flammable propellants --Eco friendly 728-19419 D | SELF F | RACHETING WIRE K | 1.4MM NEEDLE & ADJUSTING TERMINAL CRIMPER NOZZLE SETS WIRE STRIPPER --Racheting mechanism design --For 1.4mm spray gun --Automatically adjusts --Adjustable crimping compression to strip 24-10 AWG --Steel jaw wire and cable --Color coded wire sizes: --Crimps 22-10 AWG insulated Red 22-18AWG-DIN 0.5-1.0mm and non-insulated wire terminals Blue 16-14AWG-DIN 1.5-2.5mm --Crimps 7-8mm ignition terminals Yellow 12-10AWG-DIN 4-6mm --Wire cutter --Comfortable TPR hand grips 728-11475 $2199 EA 728-11477 $2199 EA 728-19100 $2199 EA 348 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE