YKK-AP-VOL1

YES 45 FS/FI Storefront System TABLE OF CONTENTSPRODUCT DATA......................................................................................... Page 2PICTORIAL VIEWS...................................................................................... Page 3 to 4 YES 45 FS STOREFRONT SYSTEM FOR 1/4\" GLAZING 1-3/4\" x 4-1/2\"FRAMING MEMBERS (1/4 SIZE)............................................................... Page 5 to 7WIND LOAD / DEAD LOAD CHARTS....................................................... Page 8 to 9 YES 45 FI STOREFRONT SYSTEM FOR 1\" GLAZING 2\" x 4-1/2\"FRAMING MEMBERS (1/4 SIZE)............................................................... Page 10 to 12WIND LOAD / DEAD LOAD CHARTS....................................................... Page 13 to 14*The latest installation instructions for this product are available at www.ykkap.com.Effective Date: September 15, 2016 | 02-1009-04 Page-1

> YES 45 FS/FI Center Set Storefront SystemSYSTEM DESCRIPTION:YES 45 FS (1-3/4”x 4-1/2”) is a center set, flushglazed framing system designed primarily for 1/4”glass or infill panels1/4”to 3/8” thick. YES 45 FI (2”x4-1/2”) is a center set, flush glazed framing systemdeveloped for 1” insulating glass and other types ofinfill panels of varying thicknesses. Both systemswill accommodate YKK AP’s hinged mullion, aswell as our flexible mullion; these mullions allowmore creative freedom where curves and anglesbecome a functional part of the design.OPTIONS & FEATURES: n Outside or Inside Glazed n Screw Spline and Shear Block Assembly n Gasket With Stretch-Resistant Cord n Integral Entrance Door Frames n Enhanced Water Infiltration Resistance n Model 20D/35D/50D Single Doors up to 4’–0” x 8’–0” n Model 20D/35D/50D Pairs up to 8’-0” x 8’-0”Entrances | Storefronts | Curtain Walls | Sun Controls | Windows | Balcony Doors

YES 45 FS/FI Storefront System SCREW SPLINE ASSEMBLY HEAD VERTICAL MULLION SPLINE SCREWS SNAP IN FILLER INTERMEDIATE HORIZONTAL SILLYES 45 FI ShownYES 45 FS Similar The Screw Spline Assembly method uses a two piece vertical GLASS STOP SILL mullion. This allows the frame to be constructed in units and FLASHING installed using screws driven through the back of the vertical mullions into the screw splines of the horizontal members. Page-3 The units are then snapped together at the vertical to complete the fabrication.Effective Date: September 15, 2016 | 02-1009-04

YES 45 FS/FI Storefront System SHEAR BLOCK ASSEMBLY VERTICAL MULLION SHEAR BLOCK SCREWS HEAD SHEAR BLOCKINTERMEDIATE HORIZONTALSILL SILL FLASHINGThe Shear Block Assembly method uses shear blocks GLASS STOPto attach horizontal members to tubular vertical mullions.This allows for a stronger joint connection. 02-1009-04 | Effective Date: September 15, 2016Page-4

YES 45 FS/FI Storefront System YES 45 FS FRAMING MEMBERS 1 11 2 13 7 8 12 SCALE: 1/4 SIZE4 56 036 10 14 9 31-3/4” E9-1003 E9-1033 E9-1032 E9-0403 [44.5mm] E9-1003 E9-1034 5” [127.0mm] 4-1/2” [114.3mm] SECTION 1A 9-3/8” [238.1mm] E9-1035SECTION 1 HEAD RECEPTOR HEADE9-1005 E9-1006 E9-1005 E9-1069 E9-1023 E9-0408SECTION 2 SECTION 2CHORIZONTAL 9-3/8” SIDELITE MIDRAILE9-1005 E9-1069 E9-1009 E9-0403 SECTION 2B E9-1034 5” HORIZONTAL E9-1009 E9-1005 E9-1069 SECTION 2A 7-1/2” [190.5mm]TWO PIECE HORIZONTALE9-1005 E9-1069 E9-1023 E9-1068 E9-1068 SECTION 3 SECTION 3A E9-1035 SILL 5” SILL SECTION 3BEffective Date: September 15, 2016 | 02-1009-04 7-1/2” SIDELITE BASE Page-5

YES 45 FS/FI Storefront System YES 45 FS FRAMING MEMBERS 1 4 2 7 11 13 56 9 14 SCALE: 1/4 SIZE 3 8036 12 10 E9-1003 E9-1003 E9-1001 E9-1001 E9-1059 E9-1009 E9-1009 E9-1002 E9-1009SECTION 4 E1-0155 JAMB SECTION 5 SECTION 5A SECTION 5B SECTION 5C E9-1001 VERTICAL VERTICAL VERTICAL W/ HEAVY DUTY STEEL REINFOR. E9-1071 E9-1078 VERTICAL E9-1024SECTION 4A SECTION 5D SECTION 5E E9-1025 JAMB TUBULAR HEAVY DUTY SECTION 6 VERTICAL TUBULAR VERTICAL EXPANSION MULLION E9-1009 E9-1044 E9-1007 E9-1008 E9-1021 E9-1009 E9-1045 E9-1037 SECTION 7 SECTION 7A SECTION 8 SECTION 990° OUTSIDE CORNER 135° OUTSIDE CORNER 90° INSIDE CORNER 0° - 15° HINGED MULLIONPage-6 02-1009-04 | Effective Date: September 15, 2016

YES 45 FS/FI Storefront System YES 45 FS FRAMING MEMBERS 1 SCALE: 1/4 SIZE 11 0 3 6 2 13 8 E9-0403 7 12 AS-04254 56 10 14 9 3E9-1028 AS-0421 E9-0422 E9-1009 E9-0434 SECTION 13A E9-1117 DOUBLE ACTING TRANSOM BAR SECTION 9A SECTION 11 E9-0403 90°-133° FLEXIBLE DOOR JAMB @TRANSOM AS-0402 MULLION AS-0421 SECTION 13E9-1028 E9-1009 SINGLE ACTING TRANSOM BAR E9-1118 E9-0407 SECTION 9B SECTION 12 SECTION 14134°-170° FLEXIBLE SINGLE ACTING MULLION DOOR JAMB BOTTOM RAIL E9-1022 E9-0422 Page-7 E9-1009 E9-1009 SECTION 12A SECTION 10 DOUBLE ACTING DOOR JAMB THREE-WAY 90° CORNEREffective Date: September 15, 2016 | 02-1009-04

YES 45 FS/FI Storefront System YES 45 FS WIND LOAD CHARTSDEFLECTION CRITERIA: AAMA TIR-A11 - L/175 or L/240 + 1/4\" (6.4mm) - FOR SPANS GREATER THAN 13'-6\" (4.1m) BUT LESS THAN 40'-0\" (12.2m) CODES AND SPECIFICATIONS MAY VARY, NO SINGLE LITE OF GLASS SHALL DEFLECT MORE THAN 3/4\" (19.1mm)ALLOWABLE WIND LOAD STRESS YKK AP tested standard. Contact YKK AP for more information.These charts include unbraced length analysis and are based off at least one horizontal being placed at the midpoint of the span. For otherapplications, please contact YKK AP engineers at 1-866-955-2732. 14 E9-1001 / E9-1009 14 E9-1003 / E9-1009 V V A A E 13 B Ixx=2.649 in4 E 13 B R C T 12 (110.25 cm4) R D C I D T 12 11 I C 11 A 10 C L A 10 9 L H Ixx=2.822 in4 H 9 E8 (117.45 cm4) E 8 I7 I7 G G H6 H6 T T 5 5(FT) (FT) 23 45 6 7 A=15 PSF (720 Pa) 23 45 6 7 VERTICAL SPACING (FT) B=20 PSF (960 Pa) VERTICAL SPACING (FT) C=30 PSF (1440 Pa) D=40 PSF (1920 Pa) E9-1071 E9-1001 / E9-1002 / E1-0155 14 A 16 V B V E 13 Ixx=2.477 in4 E 15 R C (103.10 cm4) T 12 D R T 14 I 11 I 13 C C A 10 L A 12 A L 11 B 9 10 Ixx=5.902 in4 H 9 C H (245.70 cm4) E D E8 I G I7 G H8 H6 T T 7 5 (FT)(FT) 23 45 6 7 23 45 6 7 VERTICAL SPACING (FT) VERTICAL SPACING (FT)Page-8 02-1009-04 | Effective Date: September 15, 2016

YES 45 FS/FI Storefront System YES 45 FS WIND AND DEAD LOAD CHARTS 16 E9-1059 / E9-1009 18 E9-1078 V V A 3 45 6 E 15 B E 17 C R D R 16 T 14 23 45 6 7 T I I 15 13 C 14 C A A 12 13 L L 11 12 H E 10 Ixx=4.560 in4 Ixx=4.372 in4 H 11 A (189.80 cm4) (181.98 cm4) E B I9 C G I 10 D H8 A=15 PSF (720 Pa) G9 7 T B=20 PSF (960 Pa) H C=30 PSF (1440 Pa) T8 7(FT) 7 (FT) D=40 PSF (1920 Pa) 2VERTICAL SPACING (FT) VERTICAL SPACING (FT) DEAD LOAD CHART 12 E9-1006 O P 11 A E 10 B N9 34 56 7 I N8 G7 H6 E5 I4 G H3 T2 1 (FT) OPENING WIDTH (FT)Effective Date: September 15, 2016 | 02-1009-04 Page-9

YES 45 FS/FI Storefront System YES 45 FI FRAMING MEMBERS 1 2 11 45 13 SCALE: 1/4 SIZE 3 8036 7 12 10 9 14 E9-0413 E9-1033 E9-10132” E9-1032 GLAZING [50.8mm] OPTIONS 5-1/4” [133.3mm] 3/4” 5/8” 1/2” 1/4”4-1/2” [114.3mm]E9-10131E9-1034SECTION 1 SECTION 1A E9-1040 HEAD HEAD RECEPTORE9-1015 E9-1016 E9-1015 E9-1089 E9-1035 E2-0052 E9-0413 2 E9-1039 E2-0064 E9-0408 E9-1039 E9-1023 E2-0052SECTION 2 SECTION 2CHORIZONTAL 9-3/4” SIDELITE MIDRAILE9-1015 E9-1089 E9-1012 E9-0413 3 SECTION 2B 5-1/4” HORIZONTAL E9-1012 E9-1015 E9-1089 E9-1034 SECTION 2A 4 E9-1039TWO PIECE HORIZONTALE9-1015 E9-1089 E9-1023 E2-0053 E9-1068 E9-1068 SECTION 3 E9-1035 SILL SECTION 3A SECTION 3BPage-10 5-1/4” SILL 7-1/2” SIDELITE BASE 02-1009-04 | Effective Date: September 15, 2016

YES 45 FS/FI Storefront System YES 45 FI FRAMING MEMBERS 1 2 11 13 SCALE: 1/4 SIZE036 8 12 4 56 7 10 3 9 14E9-1013 E9-1013 E9-1011 E9-1011 E9-1041 E9-1012 E9-1012 E1-0156 E9-1012 E9-1012SECTION 4 SECTION 5 SECTION 5A SECTION 5B SECTION 5C JAMB VERTICAL VERTICAL VERTICAL W/ HEAVY DUTY STEEL REINFORCING VERTICAL E9-1011 E9-1075 E9-1079 E9-1026 E9-1027SECTION 4A SECTION 5D SECTION 5E SECTION 6 JAMB TUBULAR HEAVY DUTY EXPANSION VERTICAL TUBULAR VERTICAL MULLION E9-1019 E9-1019 E9-1021 E9-1021 E9-1037E9-1019 SECTION 7A E9-1017 135° OUTSIDE CORNER E9-1018 SECTION 7 SECTION 8 SECTION 990° OUTSIDE CORNER 90° INSIDE CORNER 0° -15° HINGED MULLIONEffective Date: September 15, 2016 | 02-1009-04 Page-11

YES 45 FS/FI Storefront System YES 45 FI FRAMING MEMBERS12 11 SCALE: 1/4 SIZE 13 036 7 8 124 56 10 14 E9-0413 9 AS-04263 E9-1029 AS-0411 SECTION 13A E9-0415 E9-1117 E9-1019 DOUBLE ACTING TRANSOM BAR SECTION 9A E9-0435 E9-041393°-133° FLEXIBLE MULLION SECTION 11 AS-0412 E9-1029 DOOR JAMB @TRANSOM E9-1118 AS-0411 E9-1019 SECTION 9B SECTION 12 SECTION 13134°-170° FLEXIBLE MULLION SINGLE ACTING SINGLE ACTING DOOR JAMB TRANSOM BARE9-1022 E9-1019 E9-0415 E9-1019 SECTION 10 SECTION 12A E9-0407 THREE WAY DOUBLE ACTING SECTION 14 90° CORNER DOOR JAMB BOTTOM RAILPage-12 02-1009-04 | Effective Date: September 15, 2016

YES 45 FS/FI Storefront System YES 45 FI WIND LOAD CHARTSDEFLECTION CRITERIA: AAMA TIR-A11 - L/175 or L/240 + 1/4\" (6.4mm) - FOR SPANS GREATER THAN 13'-6\" (4.1m) BUT LESS THAN 40'-0\" (12.2m) CODES AND SPECIFICATIONS MAY VARY, NO SINGLE LITE OF GLASS SHALL DEFLECT MORE THAN 3/4\" (19.1mm)ALLOWABLE WIND LOAD STRESS YKK AP tested standard. Contact YKK AP for more information.These charts include unbraced length analysis and are based off at least one horizontal being placed at the midpoint of the span. For otherapplications, please contact YKK AP engineers at 1-866-955-2732. 15 E9-1011 / E9-1012 15 E9-1013 / E9-1012 V V A A E 14 Ixx=2.988 in4 E 14 B C R B (124.37 cm4) R D T 13 C T 13 D I I 12 12 C C A 11 A 11 L L 10 10 Ixx=3.219 in4 H H (133.97 cm4) E 9 E9 I8 I8 G G H7 H7 T T 6 6(FT) (FT) 23 45 6 7 A=15 PSF (720 Pa) 23 45 6 7VERTICAL SPACING (FT) B=20 PSF (960 Pa) VERTICAL SPACING (FT) C=30 PSF (1440 Pa) D=40 PSF (1920 Pa)E9-1011 / E9-1012 / E1-0156 E9-1041 / E9-1012 18 17 AV B V CE 17 D E 16RT 16 R T 15I 15C I 14 CA 14L A 13 L13 12H A Ixx=6.816 in4E 12 B (283.70 cm4) Ixx=5.183 in4 H (215.73 cm4) E 11I 11 CG I 10 GH 10 H9 T D 9 T(FT) 8 (FT) 23 45 6 7 234567VERTICAL SPACING (FT) VERTICAL SPACING (FT)Effective Date: September 15, 2016 | 02-1009-04 Page-13

YES 45 FS/FI Storefront System YES 45 FI WIND AND DEAD LOAD CHARTS 18 E9-1079 Ixx=5.018 in4 V (208.86 cm4) E 17 A R B A=15 PSF (720 Pa) T 16 C B=20 PSF (960 Pa) I 15 D C=30 PSF (1440 Pa) C D=40 PSF (1920 Pa) A 14 L 13 H 12 E 11 I G 10 H T9 (FT) 8 234567 VERTICAL SPACING (FT) DEAD LOAD CHART 12 E9-1016 O P 11 A E 10 B N9 34 56 7 I N8 G7 H6 E5 I4 G H3 T2 (FT) 1 OPENING WIDTH (FT)Page-14 02-1009-04 | Effective Date: September 15, 2016

YES 45 TU/FT



YES 45 TU/FT Thermal Storefront System TABLE OF CONTENTS YES 45 TU CENTER SET THERMAL STOREFRONT SYSTEM FOR 1\" GLAZING 2\" x 4-1/2\"PRODUCT DATA................................................................................. Page 2PICTORIAL VIEWS............................................................................. Pages 3 to 4FRAMING MEMBERS (1/4 SIZE)...................................................... Pages 5 to 9WIND LOAD / DEAD LOAD CHARTS............................................. Pages 10 to 11 YES 45 TU FRONT SET THERMAL STOREFRONT SYSTEM FOR 1\" GLAZING 2\" x 4-1/2\"PRODUCT DATA................................................................................. Page 12PICTORIAL VIEWS............................................................................. Pages 13 to 18FRAMING MEMBERS (1/4 SIZE)...................................................... Pages 19 to 24WIND LOAD / DEAD LOAD CHARTS............................................. Pages 25 to 27 YES 45 FT THERMAL STOREFRONT SYSTEM FOR 1\" GLAZING 2-1/4\" x 4-1/2\"PRODUCT DATA................................................................................. Page 28PICTORIAL VIEWS............................................................................. Pages 29 to 30FRAMING MEMBERS (1/4 SIZE)...................................................... Pages 31 to 33WIND LOAD / DEAD LOAD CHARTS............................................. Pages 34 to 35*The latest installation instructions for this product are available at www.ykkap.com.Effective Date: May 11, 2017 | 02-1003-08 Page-1

> YES 45 TU Thermally Broken Center Set Storefront SystemSYSTEM DESCRIPTION:YES 45 TU is a thermally broken, center set, flush glazedstorefront system for insulating glass. The system isthermally broken by means of a poured and debridgedpocket that employs a patented process, ThermaBondPlus®, to greatly improve adhesion of the polyurethaneto the extruded aluminum. Combining science andtechnology, ThermaBond Plus resolves the problem ofadhesion and the resultant dry shrinkage associatedwith typical poured and debridged systems.OPTIONS & FEATURES: n 2\" Face by 4-1/2\" Overall Depth n Outside or Inside Glazed n Accepts 1\" Insulating Glass n High Performance Sill Flashing w No Blind Seals w Tall back leg for enhanced water resistance w Patented 3 point attachment of end dam n Patented Screw Spline or Shear Block Assembly n ThermaBond Plus Thermal Break n Model 20D/35D/50D Single Doors up to 4'-0\" x 8'-0\" n Model 20D/35D/50D Pairs up to 8'-0\" x 8'-0\" n Integrates with YKK AP venting windowsEntrances | Storefronts | Curtain Walls | Sun Controls | Windows | Balcony Doors

























YES 45 TU/FT Thermal Storefront SystemYES 45 TU FRONT SET INSIDE GLAZED SCREW SPLINE ASSEMBLY HEAD SCREW SPLINE MULLION SNAP-IN POCKET FILLER INTERMEDIATE SPLINE HORIZONTAL SCREWSEND DAM GLASS STOPEND DAM SILLFASTENERS THERMAL SILL FLASHINGEffective Date: May 11, 2017 | 02-1003-08 Page-15

YES 45 TU/FT Thermal Storefront SystemYES 45 TU FRONT SET INSIDE GLAZED SHEAR BLOCK ASSEMBLY SHEAR BLOCK SCREWS HEAD TUBULAR MULLION GLASS STOP INTERMEDIATE HORIZONTALEND DAM SHEAR BLOCK MOUNTING SCREWS SHEAR SNAP-IN BLOCK FILLEREND DAM SILLFASTENERS 02-1003-08 | Effective Date: May 11, 2017 THERMAL SILL FLASHINGPage-16

YES 45 TU/FT Thermal Storefront System YES 45 TU FRONT SET SSG ASSEMBLY END SPLINE DAM SCREWS CONTINUOUS HEADINTERMEDIATE SSG HORIZONTAL MULLION SHEAR BLOCK GLASS STOPEND DAM SHEAR BLOCK FLAT MOUNTING SCREWS FILLER CONTINUOUS SILLEND DAMFASTENERS THERMAL SILL FLASHINGEffective Date: May 11, 2017 | 02-1003-08 Page-17

YES 45 TU/FT Thermal Storefront SystemYES 45 TU FRONT SET HORIZONTAL MEMBERS FOR OUTSIDE GLAZING 1 1A 1B 2 2A 2B 11 13 8 14 74 56 12 10 9 SCALE: 1/4 SIZE 036 3 3A SCREW SPLINE SHEAR BLOCK 4-1/2\" [113.8] 4-1/2\" [113.8] BE9-2514 E9-1033 BE9-2562 2\" [50.8] E9-2519 BE9-2514 2\" [50.8] BE9-2514E9-2519 E9-2519 SECTION 1 E1-1144 SECTION 1B HEAD SECTION 1A HEAD RECEPTOR HEAD BE9-2515 BE9-2515 BE9-2517E9-2519 E9-2519 E1-1144 E9-2519 E1-1145 SECTION 2 SECTION 2A E9-2512 HORIZONTAL HORIZONTAL SECTION 2B HORIZONTAL END BAY CONDITION BE9-2513 E9-2512 BE9-2578 E1-1080 BE9-2518E1-1080 E1-1145 BE9-2578 SECTION 3 SECTION 3A SILL SILLPage-18 02-1003-08 | Effective Date: May 11, 2017

YES 45 TU/FT Thermal Storefront SystemYES 45 TU FRONT SET HORIZONTAL MEMBERS FOR INSIDE GLAZING 1 1A 1B 2 2A 7 11 13 SCALE: 1/4 SIZE4 56 9 8 14 036 3 3A 12 10 SCREW SPLINE SHEAR BLOCK 4-1/2\" [113.8] 4-1/2\" [113.8] 2\" [50.8] E9-1033 BE9-2562 2\" [50.8]BE9-2521 BE9-2521 E1-1145 BE9-2521 E9-2523 E9-2523 E9-2523 SECTION 1 SECTION 1A SECTION 1B HEAD HEAD HEAD RECEPTOR BE9-2522 BE9-2522 GLAZING OPTIONS E9-2523 E1-1145 1 2 E9-2523 SECTION 2 E9-1040 E9-1039 SECTION 2A E2-0052 HORIZONTAL E2-0064 HORIZONTAL 5/8\" 1/4\" 3/4\" 1/2\" BE9-2513 E9-2512 3 E9-1039 4 BE9-2578 E1-1080 E1-1145 E9-1039 BE9-2518 E2-0053E1-1080 E2-0052 BE9-2578 SECTION 3 SECTION 3A SILL SILLEffective Date: May 11, 2017 | 02-1003-08 Page-19

YES 45 TU/FT Thermal Storefront System YES 45 TU FRONT SET VERTICAL & CORNER MEMBERS 1 2 7 11 SCALE: 1/4 SIZE45 6 13 036 3 9 8 12 10 14 2-1/4\" [57.2] E9-2512 BE9-2526BE9-2513 BE9-2525 4-1/2\" [113.8] E9-2512 4-1/2\" [113.8] BE9-2507 SECTION 4 SECTION 6 SECTION 7 JAMB EXPANISION 90° OUTSIDE CORNER MULLION 2\" [50.8] BE9-2511 BE9-2516E9-2512 BE9-2506 E9-2512 SECTION 5 SECTION 5A E9-2512TWO PIECE MULLION ONE PIECE MULLION SECTION 8 90° INSIDE CORNERBE9-2505 E9-2512 E9-2512 BE9-2528 BE9-2524 BE9-2527 BE9-2528 E9-2512 BE9-2504 SECTION 9A SECTION 10A SECTION 9 SECTION 10 0°- 12.5° HINGED 0°- 15° HINGED INSIDE CORNER OUTSIDE CORNER135° INSIDE CORNER 135° OUTSIDE CORNERPage-20 02-1003-08 | Effective Date: May 11, 2017

YES 45 TU/FT Thermal Storefront System YES 45 TU FRONT SET DOOR FRAMING MEMBERS 1 1A 1B 2 2A 7 11 13 NOTE: For best thermal performance, surface4 56 9 8 14 mounted closer is recommended. Dual Finish option not available with OHCC. 3 3A 12 10 SCALE: 1/4 SIZE 0362\" [50.8] 2-1/4\" [57.2] E9-2425 E9-2536E9-2546 AS-2503 E9-0409 E9-2540 AS-2539 (Modified) AS-0488 1-1/2\" [36.0] E9-2425 E9-25424-1/2\" [113.8] BE9-2537 4-1/2\" [113.8] E9-2543 SECTION 13 E9-2541 SECTION 13A SECTION 11 STANDARD SECTION 11A THERMAL TRANSOM BAR STANDARD TRANSOM BAR THERMAL TRANSOM JAMB E9-2540TRANSOM JAMB AS-2539 E9-0489 E9-2425 E9-2540 BE9-2537 E9-0489 AS-0718 E9-0409 AS-0215 SECTION 14AE9-2546 E9-1113 AS-0409 OHCC TRANSOM BARSECTION 12 SECTION 14 SECTION 12A STANDARD OHCC THERMAL DOOR JAMB TRANSOM BAR DOOR JAMBEffective Date: May 11, 2017 | 02-1003-08 Page-21

YES 45 TU/FT Thermal Storefront System YES 45 TU FRONT SET HORIZONTAL MEMBERS FOR SSG 1 2 11 13 784 56 12 SCALE: 1/4 SIZE 036 3 14 4-1/2\" [113.8] 4-1/2\" [113.8] 2\" [50.8] 2\" [50.8] BE9-2574 BE9-2575E9-2501 E9-2523 E9-2501 SECTION 1 SECTION 1A I.G. HEAD O.G. HEAD BE9-2572 BE9-2573E9-2508 E1-1145 E9-2508 E1-1145 E9-2523 E9-2512 SECTION 2 SECTION 2AI.G. HORIZONTAL O.G. HORIZONTAL E1-1080 BE9-2513 BE9-2578 SECTION 3 I.G./O.G. SILLPage-22 02-1003-08 | Effective Date: May 11, 2017

YES 45 TU/FT Thermal Storefront SystemYES 45 TU FRONT SET VERTICAL MEMBERS FOR SSG 1 2 11 13 784 56 12 SCALE: 1/4 SIZE 036 3 14BE9-2513 2\" [50.8] E9-2547 4-1/2\" [113.8]E9-2512 4-1/2\" [113.8] BE9-2506SECTION 4 SECTION 5 E9-2512 JAMB SSG MULLION SECTION 8 2\" [50.8] 90° INSIDE CORNER E9-2548 E9-2549 E9-2510 SECTION 6 E9-2348 EXPANSION SECTION 7 SSG MULLION SSG CORNER MULLIONEffective Date: May 11, 2017 | 02-1003-08 Page-23

YES 45 TU/FT Thermal Storefront System YES 45 TU FRONT SET DOOR FRAMING MEMBERS FOR SSG 1 2 11 13 784 56 12 SCALE: 1/4 SIZE 036 3 142\" [50.8] 2-1/4\" [57.2] E9-2425 E9-2536E9-2546 AS-2539 AS-2503 E9-0409 E9-2540 (Modified) AS-0488 1-1/2\" [36.0] E9-2425 E9-25424-1/2\" [113.8] BE9-2537 4-1/2\" [113.8] E9-2543 SECTION 13 E9-2541 SECTION 13A SECTION 11 STANDARD SECTION 11A THERMAL TRANSOM BAR STANDARD TRANSOM BAR THERMAL TRANSOM JAMB E9-2540TRANSOM JAMB AS-2539 E9-0489 E9-2425 E9-2540 BE9-2537 E9-0489 AS-0718 E9-0409 AS-0215E9-2546 E9-1113 AS-0409 SECTION 12 SECTION 13B SECTION 12A SECTION 13C STANDARD OHCC THERMAL OHCC DOOR JAMB TRANSOM BAR DOOR JAMB TRANSOM BARPage-24 02-1003-08 | Effective Date: May 11, 2017

YES 45 TU/FT Thermal Storefront System YES 45 TU FRONT SET WIND LOAD CHARTSDEFLECTION CRITERIA: AAMA TIR-A11 - L/175 FOR ≤ 13’-6” SPAN OR L/240 + 1/4\" (6.4mm) - FOR SPANS GREATER THAN 13'-6\" (4.1m) BUT LESS THAN 40'-0\" (12.2m) CODES AND SPECIFICATIONS MAY VARY, NO SINGLE LITE OF GLASS SHALL DEFLECT MORE THAN 3/4\" (19.1mm) ALONG SUPPORTED EDGE.ALLOWABLE WIND LOAD STRESS YKK AP tested standard. Contact YKK AP for more information.These charts include unbraced length analysis and are based off at least one horizontal being placed at the midpoint of the span. For otherapplications, please contact YKK AP engineers at 1-866-955-2732. BE9-2511 w/ E9-2512 BE9-2516 15 15V VE 14 E 14R RT 13 T 13I 12 I 12C CA 11 A 11L L 10 10 A A Ixx = 3.284 in4 BH 9 B (123.72 cm4) Ixx = 3.284 in4 H 9E (140.10 cm4) E 8 CI8 DG C I D GH7 H7T6 T6( FT) A=15 PSF (720 Pa) ( FT) B=20 PSF (960 Pa) 234567 2345 6 7 V E R TI C A L S PA C I N G ( FT) C=30 PSF (1440 Pa) V E R TIC A L S PA C IN G ( FT) D=40 PSF (1920 Pa)Effective Date: May 11, 2017 | 02-1003-08 Page-25

YES 45 TU/FT Thermal Storefront System YES 45 TU FRONT SET DEAD LOAD CHARTS BE9-2515 BE9-2517 w/ E9-2512 12 12 A BO 11 O 11 34 5 6 7P PE 10 E 10N 9 N 9I 8 I 8N NG7 G7 H 6 A H 6 E 5 B E 5 I 4 I 4 G 3 G 3 H 2 H 2 T 1 T 1( FT) ( FT) 34 5 6 7 OPENING WIDTH (FT) OPENING WIDTH (FT) 12 BE9-2522 w/ E9-2523O 11 AP BE 10 34 5 6 7 A = Setting Blocks at 1/8 Point LocationsN 9 B = Setting Blocks at 1/4 Point Locations Note: Dead load requirements are based upon a maximum I 8 deflection of 1/8\" (3.2mm) at the center of the horizontal.NG7 02-1003-08 | Effective Date: May 11, 2017 H 6 E 5 I 4 G 3 H 2 T 1( FT) OPENING WIDTH (FT)Page-26

YES 45 TU/FT Thermal Storefront SystemYES 45 TU FRONT SET SSG WIND LOAD CHARTS E9-2547 13VE 12RT 11I 10CA9L 8H 7 A Ixx = 1.259 in4E B (52.40 in4)I6G CH 5 DT4( FT) A=15 PSF (720 Pa) B=20 PSF (960 Pa) 234567 V E R TIC A L S PA C IN G ( FT) C=30 PSF (1440 Pa) D=40 PSF (1920 Pa)Effective Date: May 11, 2017 | 02-1003-08 Page-27

YES 45 TU/FT Thermal Storefront System > YES 45 FT Thermally Broken Storefront System for Monolithic & Insulating GlassSYSTEM DESCRIPTION:YES 45 FT is a thermally broken, center set, flushglazed storefront system for monolithic and insulatingglass. The system is thermally broken by YKK APMegaTherm®technology, which provides a continuousthermal barrier while conserving energy and reducingcondensation. MegaTherm technology incorporates6/6 nylon polyamide glass-fiber reinforced pressureextruded bars that will not crack, shrink, or degrade.OPTIONS & FEATURES: n 2-1/4” Face by 4-1/2” Overall Depth n Outside Glazed / Inside Glazed Option n Glazing of 1/4” up to 1” Infills n Screw Spline or Shear Block Assembly n Seemless Entrance Door Integration n Optional 4” Vertical and Horizontal Profiles n Gasket With Stretch-Resistant Cord n YKK AP MegaTherm® Thermal Break n Separate Interior/Exterior Finish Options n Integrates with YKK AP venting windowsEntrances | Storefronts | Curtain Walls | Sun Controls | Windows | Balcony DoorsPage-28 02-1003-08 | Effective Date: May 11, 2017

YES 45 TU/FT Thermal Storefront SystemYES 45 FT SCREW SPLINE ASSEMBLYEffective Date: May 11, 2017 | 02-1003-08 Page-29

YES 45 TU/FT Thermal Storefront System YES 45 FT SHEAR BLOCK ASSEMBLYPage-30 02-1003-08 | Effective Date: May 11, 2017

YES 45 TU/FT Thermal Storefront System YES 45 FT FRAMING MEMBERS 1 2 9 11 784 56 10 SCALE: 1/4 SIZE 036 3 12 E1-1054 BE9-1520 BE9-1503 BE9-1503 BE9-1512 E9-1033 BE9-1503 SECTION 52-1/4” 4-1/2” [114.3mm][57.2mm] BE9-1503 MULLION 4-1/2” [114.3mm]SECTION 1 SECTION 1A BE9-1507 HEAD HEAD RECEPTOR E9-1015 BE9-1513 SECTION 4E9-1015 BE9-1506 JAMB BE9-1518SECTION 2 BE9-1519HORIZONTAL SECTION 2A SECTION 5A SECTION 5B 4-1/2” HORIZONTAL DUAL FINISH TUBULAR MULLION MULLION E9-1015 BE9-1513 BE9-1515 BE9-1512 BE9-1516E9-1015 BE9-1504 BE9-1510 BE9-1510 BE9-1517SECTION 3 SECTION 3A SECTION 5C SECTION 6 SILL 4-1/2” SILL HEAVY DUTY EXPANSION MULLION MULLIONEffective Date: May 11, 2017 | 02-1003-08 Page-31

YES 45 TU/FT Thermal Storefront System YES 45 FT FRAMING MEMBERS 1 2 11 13 784 56 12 10 SCALE: 1/4 SIZE 9 036 3 14E9-10157” [177.8mm] BE9-1506 BE9-1503 E9-1206 * E1-9836 7” [177.8mm] BE9-2552 BE9-1506 E9-1206 * E1-9836 BE9-1506 SECTION 2B BE9-1518 BE9-1518 BE9-1519 E9-1015 OUTSIDE GLAZED SECTION 2CCOMPOUND HORIZONTAL INSIDE GLAZED COMPOUND HORIZONTAL E9-1015 BE9-1506 BY7-9478 E1-9836 4-1/2” [114.3mm] E9-1206 * BE9-15037” [177.8mm] 7” [177.8mm] 7” [177.8mm] E1-9836 E9-1206 * E9-1015 E9-1206 * SECTION 5D COMPOUND MULLION BE9-1506 BE9-1506 BE9-2578 BE9-2578 SECTION 3B * Other face cover options available. SECTION 3C Contact YKK AP for more information. OUTSIDE GLAZED INSIDE GLAZED COMPOUND SILL COMPOUND SILLPage-32 02-1003-08 | Effective Date: May 11, 2017

YES 45 TU/FT Thermal Storefront System YES 45 FT FRAMING MEMBERS 9 11 10 124-1/2” MULLIONEffective Date: May 11, 2017 | 02-1003-08 Page-33

YES 45 TU/FT Thermal Storefront System YES 45 FT WIND LOAD CHARTSDEFLECTION CRITERIA: AAMA TIR-A11 - L/175 FOR ≤ 13’-6” SPAN OR L/240 + 1/4” (6.4mm) - FOR SPANS GREATER THAN 13’-6” (4.1m) BUT LESS THAN 40’-0” (12.2m) CODES AND SPECIFICATIONS MAY VARY, NO SINGLE LITE OF GLASS SHALL DEFLECT MORE THAN 3/4” (19.1mm) ALONG SUPPORTED EDGE.ALLOWABLE WIND LOAD STRESS YKK AP tested standard. Contact YKK AP for more information.These charts include unbraced length analysis and are based off at least one horizontal being placed at the midpoint of the span. For otherapplications, please contact YKK AP engineers at 1-866-955-2732. BE9-1503 / BE9-1512 BE9-1507 15 15V VE 14 E 14R RT 13 T 13I 12 I 12C CA 11 A 11L A L 10 A 10 Ixx=3.425 in4 H 9 B B Ixx=3.563 in4 (142.56 cm4) EH9 (148.30 cm4)EI8 C I8 CG D G DH7 H7T T 6 6(FT) A=15 PSF (720 Pa) ( F T ) 234567 B=20 PSF (960 Pa) 234567 VERTICAL SPACING (FT) C=30 PSF (1440 Pa) VERTICAL SPACING (FT) D=40 PSF (1920 Pa) BE9-1518 / BE9-1519 BE9-1515 / BE9-1512 15 17 AV V B CE 14 E 16 DR RT 13 T 15I IC 12 14AL 11 C H 10 A Ixx=3.364 in4 A 13 (139.98 cm4) L E I9 B 12 G C Ixx=5.432 in4 H H8 D (246.87 cm4) E 11 T I 10 7 G(FT) H9 T 8 (FT) 234567 234567 VERTICAL SPACING (FT) VERTICAL SPACING (FT)Page-34 02-1003-08 | Effective Date: May 11, 2017