YKK-AP-VOL1

YES 45 TU/FT Thermal Storefront System YES 45 FT DEAD LOAD CHART A = Setting Blocks at 1/8 Point Locations B = Setting Blocks at 1/4 Point LocationsNote: Dead load requirements are based upon a maximum deflection of 1/8\" (3.2mm) at the center of the horizontal.Effective Date: May 11, 2017 | 02-1003-08 Page-35



YES 45 XT



YES 45 XT High Performance Storefront System TABLE OF CONTENTS YES 45 XT THERMAL STOREFRONT SYSTEM FOR 1\" GLAZING 2\" x 4-1/2\"PRODUCT DATA................................................................................. Page 2PICTORIAL VIEW................................................................................ Page 3OG HORIZONTAL FRAMING MEMBERS (1/2 SIZE).................... Page 4IG HORIZONTAL FRAMING MEMBERS (1/2 SIZE)...................... Page 5OPTIONAL HORIZONTAL FRAMING MEMBERS (1/2 SIZE)..... Pages 6 & 7VERTICAL FRAMING MEMBERS (1/2 SIZE)................................. Page 8OPTIONAL VERTICAL AND CORNER FRAMING MEMBERS(1/2 SIZE)............................................................................................... Pages 9 & 10DOOR FRAMING MEMBERS (1/4 SIZE)......................................... Pages 11 & 12WIND LOAD / DEAD LOAD CHARTS............................................. Pages 13 & 14*The latest installation instructions for this product are available at www.ykkap.com.Effective Date: May 10, 2017 | 02-1012-02 Page-1

> YES 45 XT High Performance Storefront Featuring Dual Thermal BarriersSuperior Thermal Performanceand Structural IntegrityThis energy saving storefront system features a dualthermal barrier design to significantly reduce heat transferand keep internal surfaces warmer. MLP™ (mechanicallock profile) technology delivers superior structural integrityto provide longer vertical spans and horizontal spacings; notto mention its best-in-class thermal performance attributes.Product Benefits/Performance n Outstanding thermal performance utilizing standard 1\" insulating glass n Overall system U-factor = 0.36 (using U =COG 0.29) n Greater efficiency can be achieved with higher performance glass n Warmer Interior Surfaces with a CRFf of 66 n STC (ASTM E 90): 1\" IG; 32, 1\" Laminated; 36 n OITC (ASTM E 1425): 1\" IG; 27, 1\" Laminated; 30 n 2\" Face by 4-1/2” Overall Depth n Screw Spline Assembly n Integrates with Sun Control Products ThermaShade® and Luminance® and YKK AP venting windowsMLP™ is a registered trademark of Azon.Entrances | Storefronts | Curtain Walls | Sun Controls | Windows | Balcony Doors

YES 45 XT High Performance Storefront System SCREW SPLINE ASSEMBLYEffective Date: May 10, 2017 | 02-1012-02 Page-3

YES 45 XT High Performance Storefront System HORIZONTAL MEMBERS FOR OUTSIDE GLAZING SCALE: 1/2 SIZE 012Page-4 02-1012-02 | Effective Date: May 10, 2017

YES 45 XT High Performance Storefront SystemHORIZONTAL MEMBERS FOR INSIDE GLAZING SCALE: 1/2 SIZE 012Effective Date: May 10, 2017 | 02-1012-02 Page-5

YES 45 XT High Performance Storefront System OPTIONAL HORIZONTAL MEMBERS SCALE: 1/2 SIZE012Page-6 02-1012-02 | Effective Date: May 10, 2017

YES 45 XT High Performance Storefront System OPTIONAL HORIZONTAL MEMBERS SCALE: 1/2 SIZE 012E9-1015 BE9-2603 BE9-2602 E1-9836 BE9-2605 E1-9836 E1-98366-1/2” [165.1mm] E9-1206 * E9-1206 * E9-1206 * E9-1206 * E1-9836E9-1015 BE9-2603 BE9-2603 E9-1015 SECTION 2B SECTION 2B OUTSIDE GLAZED INSIDE GLAZEDCOMPOUND HORIZONTAL COMPOUND HORIZONTAL* Other face cover options available. Contact YKK AP for more information. Page-7Effective Date: May 10, 2017 | 02-1012-02

YES 45 XT High Performance Storefront System VERTICAL MEMBERS SCALE: 1/2 SIZE 012Page-8 02-1012-02 | Effective Date: May 10, 2017





























YES 60 FI Storefront System YES 60 FI WIND LOAD CHARTSDEFLECTION CRITERIA: AAMA TIR-A11 - L/175 FOR ≤ 13’-6” SPAN OR L/240 + 1/4\" (6.4mm) - FOR SPANS GREATER THAN 13'-6\" (4.1m) BUT LESS THAN 40'-0\" (12.2m) CODES AND SPECIFICATIONS MAY VARY, NO SINGLE LITE OF GLASS SHALL DEFLECT MORE THAN 3/4\" (19.1mm) ALONG SUPPORTED EDGE.ALLOWABLE WIND LOAD STRESS YKK AP tested standard. Contact YKK AP for more information.These charts include unbraced length analysis and are based off at least one horizontal being placed at the midpoint of the span. For otherapplications, please contact YKK AP engineers at 1-866-955-2732. 20 E9-2911 w/ E9-2907 24 E9-2906 w/ E9-2907V VE 18 E 22R RT 16 T 20I IC 14 C 18A AL 12 L 16H 10 A Ixx=6.294 in4 Ixx=11.502 in4 H 14E B (261.97 cm4) (478.75 cm4) E 12 AI 8 I 10 B C GG 6 D H 8 CH T DT4(FT) A=15 PSF (720 Pa) (FT) B=20 PSF (960 Pa) 2 3 45 6 7 2 3 45 6 7 V E R T I C A L S PA C I N G ( F T ) C=30 PSF (1440 Pa) VERTICAL SPACING (FT) D=40 PSF (1920 Pa) 24 E9-2943 w/ E9-2907VE 22 AR BT 20 CI DC 18A Ixx=12.189 inL 16 (507.34 cm4)H 14 2 3 45 6 7EI 12G 10HT8(FT) VERTICAL SPACING (FT)Effective Date: May 11, 2017 | 02-1013-05 Page-7

YES 60 FI Storefront System YES 60 FI DEAD LOAD CHARTS E9-2903 A = Setting Blocks at 1/8 Point Locations B = Setting Blocks at 1/4 Point Locations Note: Dead load requirements are based upon a maximum deflection of 1/8” (3.2mm) at the center of the horizontal.Page-8 02-1013-05 | Effective Date: May 11, 2017

YES 60 TU Large Span Thermally Broken Offset Storefront System Achieving taller spans with better energy performance YES 60 TU is a thermally broken, offset, flush glazed storefront system for insulating glass. This system uses a pour and debridged pocket that employs a pat- ented process, ThermaBond Plus®, to greatly improve adhesion of the polyurethane thermal break material to the extruded aluminum. Combining science and technology, ThermaBond Plus® resolves the problem of adhesion and the resultant dry shrinkage associated with typical poured and debridged systems. Benefits and Performance n 2” sightline x 6” depth n Outside glazed n Accepts 1\" Insulating Glass n High performance sill flashing n Screw spline assembly n ThermaBond Plus thermal break n Model 20D/35D/50D Single Doors up to 4'-0\" x 8'-0\" n Model 20D/35D/50D Paired Doors up to 8'-0\" x 8'-0\" n Integrates with YES 45 Series storefronts n Compatible with ThermaShade® and Luminance® Sun Control productsEntrances | Storefronts | Curtain Walls | Sun Controls | Windows | Balcony Doors

YES 60 TU Thermal Storefront System HEAD SCREW SPLINE MULLION POCKET FILLER SPLINE SCREWS SILL FLASHING INTERMEDIATE GLASS STOP HORIZONTALPage-10 SILL 02-1013-05 | Effective Date: May 11, 2017

YES 60 TU Thermal Storefront System YES 60 TU HORIZONTAL MEMBERS 1 9 11 E9-1033 BE9-7361 2 7 8 10 BE9-290445 12 3 SECTION 1A HEAD RECEPTOR2” E1-2903 [50.8mm] BE9-2904 E9-1015 BE9-2903 6” [152.4mm] 4-1/2” [114.3 mm] 6-1/2” [165.1mm] E1-2907 SECTION 1 E9-1206 * E9-1015 HEAD E9-1015 BE9-2903 BE9-2556 BE9-2903 SECTION 2 SECTION 2A SECTION 2B HORIZONTAL OPTIONAL 4-1/2” OPTIONAL COMPOUND DEPTH HORIZONTAL HORIZONTAL E9-1015 BE9-2902 1 2 BE9-2901 E9-1040 E9-1039 E2-0052 E2-0064 5/8” 1/4” *SECTION 3 3/4” 1/2” 3 4 SILL E9-1039 E9-1039 E2-0052 E2-0053 * Other face cover options available. Contact YKK AP for more information.Effective Date: May 11, 2017 | 02-1013-05 Page-11

YES 60 TU Thermal Storefront System YES 60 TU VERTICAL AND CORNER MEMBERS12 9 11 BY7-9969 BY7-9970 784 56 103 12 2-1/4” [57.2mm] SECTION 6 EXPANSION MULLION BE9-2904BE9-2904 BE9-2911 BE9-2906 BE9-2904 BE9-2910 BE9-2937E1-2903 6” [152.4mm] BE9-2910 6” [152.4mm] BE9-2910 BE9-2910 BE9-2937 E9-2939 2” 2” 2” E9-2938 [50.8mm] [50.8mm] [50.8mm] SECTION 7SECTION 4 SECTION 5 SECTION 5A 90° OUTSIDE JAMB MULLION CORNER HEAVY DUTY BE9-2943 MULLION E9-2938 BE9-2911 E9-1206 * BE9-2911BE9-2910 BE9-2910 BE9-2937 BE9-2937 BE9-2910 E9-2939 BE9-2937 BE9-2910 E9-1206 * BE9-2937 BE9-2904 BE9-2910 2-1/4” 6-1/2” [165.1mm] [57.2mm] SECTION 5C SECTION 8 BE9-2904 SECTION 5B OPTIONAL COMPOUND 90° OUTSIDE HEAVY DUTY CORNER MULLION MULLIONPage-12 * Other face cover options available. Contact YKK AP for more information. 02-1013-05 | Effective Date: May 11, 2017

YES 60 TU Thermal Storefront System YES 60 TU DOOR FRAMING MEMBERS AS-9562 BE9-2912 E9-0435 SECTION 9 DOOR JAMB @ TRANSOM E9-0413 E9-0413 E9-2945AS-95626” [152.4mm] AS-9480 AS-0216 BE9-2912SECTION 11 SECTION 11A 2” SINGLE ACTING OHCC [50.8mm]TRANSOM BAR TRANSOM BAR 2” [50.8mm] 2” Page-13 [50.8mm] SECTION 10 SINGLE ACTING DOOR JAMB E9-0407 SECTION 12 BOTTOM RAILEffective Date: May 11, 2017 | 02-1013-05

YES 60 TU Thermal Storefront System YES 60 TU WIND LOAD CHARTSDEFLECTION CRITERIA: AAMA TIR-A11 - L/175 FOR ≤ 13’-6” SPAN OR L/240 + 1/4\" (6.4mm) - FOR SPANS GREATER THAN 13'-6\" (4.1m) BUT LESS THAN 40'-0\" (12.2m) CODES AND SPECIFICATIONS MAY VARY, NO SINGLE LITE OF GLASS SHALL DEFLECT MORE THAN 3/4\" (19.1mm) ALONG SUPPORTED EDGE.ALLOWABLE WIND LOAD STRESS YKK AP tested standard. Contact YKK AP for more information.These charts include unbraced length analysis and are based off at least one horizontal being placed at the midpoint of the span. For otherapplications, please contact YKK AP engineers at 1-866-955-2732. 20 BE9-2911 w/ BE9-2910 24 BE9-2906 w/ BE9-2910V VE 18 E 22R RT 16 T 20I IC 14 C 18A AL 12 L 16H 10 Ixx=5.740 in4 Ixx=10.427 in4 H 14E (434.00 cm4) EI 8 A (238.93 cm4) I 12 A BG GH 6 C H 10 B DT4 T8 C D(FT) (FT) A=15 PSF (720 Pa) 2 3 45 6 7 2 3 45 6 7 B=20 PSF (960 Pa) V E R T I C A L S PA C I N G ( F T ) C=30 PSF (1440 Pa) VERTICAL SPACING (FT) D=40 PSF (1920 Pa) 24 BE9-2943 w/ BE9-2910VE 22RT 20IC 18AL 16H 14 AE BI 12 CG 10 D Ixx=9.988 in4HT8 (415.73 cm4)(FT) 2 3 45 6 7 VERTICAL SPACING (FT)Page-14 02-1013-05 | Effective Date: May 11, 2017

YES 60 TU Thermal Storefront System YES 60 TU DEAD LOAD CHARTS BE9-2903 A = Setting Blocks at 1/8 Point Locations B = Setting Blocks at 1/4 Point LocationsNote: Dead load requirements are based upon a maximum deflection of 1/8” (3.2mm) at the center of the horizontal.Effective Date: May 11, 2017 | 02-1013-05 Page-15



YES 60 XT



YES 60 XT Advanced Thermal Storefront System TABLE OF CONTENTS YES 60 XT THERMAL STOREFRONT SYSTEM FOR 1” GLAZING 2” x 6”PRODUCT DATA................................................................................. Page 2PICTORIAL VIEWS............................................................................. Page 3FRAMING MEMBERS (1/4 SIZE)...................................................... Page 4 to 6WIND LOAD / DEAD LOAD CHARTS............................................. Page 7 to 8*The latest installation instructions for this product are available at www.ykkap.com.Effective Date: February 16, 2017 | 02-1014-02 Page-1

YES 60 XT Large Span High-Performance Offset Storefront with Dual Thermal BarriersStructural strength storefront meetssuperior thermal performanceDesigned for taller spans, this 6” deep energy savingstorefront system features a dual thermal barrier tosignificantly reduce heat transfer and increase thermalcomfort with warmer internal framing temperatures. Whentaller vertical and larger horizontal spans are required trustthe YES 60 XT to deliver the structural strength and superiorthermal performance expected in today’s advanced framingmarket.Benefits and Performance n Taller spans with wider mullion placement n U-factor = 0.38 (Using UCOG = 0.29) per NFRC 100 n Warmer interior surfaces with a CRFframe of 72 per AAMA 1503 n STC (ASTM E 90): 1” IGU; 31, 1” Laminated; 34 n OITC (ASTM E 1425): 1” IGU; 25, 1” Laminated; 28 n 2\" Face by 6” overall depth n Screw spline assembly n Integrates with YES 45 XT and Sun Control products: ThermaShade® and Luminance®Entrances | Storefronts | Curtain Walls | Sun Controls | Windows | Balcony Doors

YES 60 XT Advanced Thermal Storefront SystemHEAD SCREW SPLINE MULLION POCKET FILLER SPLINE SCREWS SILL FLASHING INTERMEDIATE GLASS STOP HORIZONTALEffective Date: February 16, 2017 | 02-1014-02 SILL Page-3

YES 60 XT Advanced Thermal Storefront System YES 60 XT HORIZONTAL MEMBERS 1 2 9 E9-1033 BE9-7361 1145 7 8 10 BE9-2919 3 12 SECTION 1A HEAD RECEPTOR2” E1-2901 [50.8mm] BE9-2919 E9-1015 BE9-2918 6” [152.4mm] 4-1/2” [114.3 mm] 6-1/2” [165.1mm] E1-2907 SECTION 1 E9-1206 * E9-1015 HEAD E9-1015 BE9-2918 BE9-2603 BE9-2918 SECTION 2 SECTION 2A SECTION 2B HORIZONTAL OPTIONAL 4-1/2” OPTIONAL COMPOUND DEPTH HORIZONTAL HORIZONTAL E9-1015 BE9-2917 BE9-2916 1 5/8” 1/4” 2 3/4” 1/2” *SECTION 3 E9-1040 E9-1039 E2-0052 SILL E2-0064 3 E9-1039 4 E9-1039 E2-0052 E2-0053 * Other face cover options available. Contact YKK AP for more information.Page-4 02-1014-02 | Effective Date: February 16, 2017

YES 60 XT Advanced Thermal Storefront System YES 60 XT VERTICAL AND CORNER MEMBERS 1 BE9-2935 2 9 11 BE9-2936 784 56 10 3 12 2-1/2” [63.5mm] SECTION 6 EXPANSION MULLION BE9-2919BE9-2919 BE9-2922 BE9-2921 BE9-2919 BE9-2910 BE9-2937E1-2901 6” [152.4mm] BE9-2910 6” [152.4mm] BE9-2910 BE9-2910 BE9-2937 E9-2939 2” 2” 2” E9-2938 [50.8mm] [50.8mm] [50.8mm] SECTION 7SECTION 4 SECTION 5 SECTION 5A 90° OUTSIDE JAMB MULLION CORNER HEAVY DUTY MULLION E9-2938 BE9-2942 BE9-2919 E9-1206 * BE9-29196” [152.4mm] BE9-2910 BE9-2910 BE9-2937 BE9-2937 BE9-2910 E9-2939 BE9-2937 BE9-2910 2-1/4” E9-1206 * BE9-2937 BE9-2919 [57.2mm] BE9-2910 6-1/2” [165.1mm]SECTION 5B SECTION 5C SECTION 8 BE9-2919 HEAVY DUTY OPTIONAL COMPOUND 90° OUTSIDE CORNER MULLION MULLION* Other face cover options available. Contact YKK AP for more information.Effective Date: February 16, 2017 | 02-1014-02 Page-5

YES 60 XT Advanced Thermal Storefront System BE9-2912 YES 60 TU DOOR FRAMING MEMBERS W/ 35XT DOORS AS-2923 BE9-1591 E9-1592 2-1/4” SECTION 9 [57.2mm] DOOR JAMB @ TRANSOM6” [152.4mm] AS-2924 2” E9-2945 [50.8mm] BE9-2912 SECTION 11 AS-0718 2-1/4” E9-0413 SINGLE ACTING SECTION 11A [57.2mm] TRANSOM BAR OHCC TRANSOM BAR AS-2923 2-1/4” SECTION 12 [57.2mm] BOTTOM RAIL SECTION 10 02-1014-02 | Effective Date: February 16, 2017 SINGLE ACTING DOOR JAMB BE9-1535Page-6

YES 60 XT Advanced Thermal Storefront System YES 60 XT WIND LOAD CHARTSDEFLECTION CRITERIA: AAMA TIR-A11 - L/175 FOR ≤ 13’-6” SPAN OR L/240 + 1/4\" (6.4mm) - FOR SPANS GREATER THAN 13'-6\" (4.1m) BUT LESS THAN 40'-0\" (12.2m) CODES AND SPECIFICATIONS MAY VARY, NO SINGLE LITE OF GLASS SHALL DEFLECT MORE THAN 3/4\" (19.1mm) ALONG SUPPORTED EDGE.ALLOWABLE WIND LOAD STRESS YKK AP tested standard. Contact YKK AP for more information.These charts include unbraced length analysis and are based off at least one horizontal being placed at the midpoint of the span. For otherapplications, please contact YKK AP engineers at 1-866-955-2732. 20 BE9-2922 w/ BE9-2910 22 BE9-2921 w/ BE9-2910V VE 18 E 20R RT 16 T 18I IC 14 C 16A AL 12 L 14H 10 Ixx=5.882 in4 Ixx=10.395 in4 H 12 AE A (244.83 cm4) (432.67 cm4) E 10 BI 8 B I G 8 CG 6 C H 6 DH D TT4(FT) A=15 PSF (720 Pa) (FT) B=20 PSF (960 Pa) 2 3 45 6 7 2 3 45 6 7 V E R T I C A L S PA C I N G ( F T ) C=30 PSF (1440 Pa) VERTICAL SPACING (FT) D=40 PSF (1920 Pa) 22 BE9-2942 w/ BE9-2910VE 20 AR BT 18 CI D Ixx=9.996 in4C 16A (416.06 cm4)L 14 2 3 45 6 7H 12EI 10G 8HT6(FT) VERTICAL SPACING (FT)Effective Date: February 16, 2017 | 02-1014-02 Page-7

YES 60 XT Advanced Thermal Storefront System YES 60 XT DEAD LOAD CHARTS BE9-2918 A = Setting Blocks at 1/8 Point Locations B = Setting Blocks at 1/4 Point Locations Note: Dead load requirements are based upon a maximum deflection of 1/8” (3.2mm) at the center of the horizontal.Page-8 02-1014-02 | Effective Date: February 16, 2017

YES 600



YES 600 Thermal Clip Storefront System TABLE OF CONTENTS YES 600 THERMAL CLIP STOREFRONT SYSTEM 1-3/4\" x 4-1/2\" & 1-3/4\" x 6\"PRODUCT DATA......................................................................................... Page 2PICTORIAL VIEWS...................................................................................... Page 3 to 6FRAMING MEMBERS (1/4 SIZE)............................................................... Page 7 to 9WIND LOAD / DEAD LOAD CHARTS....................................................... Page 10 to 12*The latest installation instructions for this product are available at www.ykkap.com.Effective Date: September 15, 2016 | 02-1005-02 Page-1

> YES 600 Front Loading Thermally Broken Storefront System for Insulating GlassSYSTEM DESCRIPTION:YES 600 is a thermally broken front loaded storefrontsystem for 1\" insulating glass. The system alsoaccepts 1/4\" monolithic glass with glazing adaptors.The thermal break is achieved by employing a uniquenylon clip that locks the exterior and interior memberstogether. This method of attaching face members alsoallows separate finishes to be used on the system.Optional face caps are available as well as an SSGVertical Mullion option.OPTIONS & FEATURES: n 1-3/4\" Face by 4-1/2\" or 6\" Overall Depth n Outside Glazed n Screw Spline or Shear Block Assembly n Nylon Clip Design Eases Installation and Reduces Labor Costs n Separate Exterior/Interior Finish Options n Integral Entrance Door FramesEntrances | Storefronts | Curtain Walls | Sun Controls | Windows | Balcony Doors